Precision collets for repeatable, high-speed clamping
Precision collets and collet chucks provide concentric, damage-free clamping of cylindrical tools and bar stock, ensuring outstanding runout and vibration control for modern CNC milling and turning. Designed from spring steel, these collets use radial elasticity to deliver 360-degree gripping force, which prevents shaft marks and enables vibration‑reduced high‑speed machining while shortening setup times. As a fundamental component in metalworking, collets excel in both toolholding and workholding applications, offering flexibility across ER‑style systems and pull‑type work collets. Key benefits include excellent concentricity, robust holding power and suitability for high‑precision serial production.
220x110x6mm Plastic Holder For VMS-5 Collets, Lightweight 0.2kg - Vertex
Compact and lightweight storage with a focus on organisation and protection: the plastic construction and the compact dimensions 220 x 110 x 6 mm keep VMS-5 collet sleeves ready for use while saving bench space. Order the VMS-5 Plastic Holder directly via Metav Werkzeuge or ask our consultants if needed. VMS-5 Plastic Holder for Collet Sleeves – Compact 220 x 110 x 6 mm by Vertex The VMS-5 Plastic Holder is a compact storage solution for workshop and tooling environments, engineered to keep VMS-5 collet sleeves organised and protected within a small footprint. Durable plastic construction Compact 220 x 110 x 6 mm format Lightweight at just 0.2 kg Designed for VMS-5 collet sleeves Better organisation, less downtime A streamlined storage solution reduces searching and handling time, directly supporting workflow efficiency. The plastic tray is shaped for orderly placement of collet sleeves, enabling quick access and clear separation of tooling. With a compact footprint of 220 x 110 x 6 mm, the tray fits into standard tool cabinets and bench shelving, contributing to a tidier workstation and fewer misplaced parts. This organisation helps to maintain production rhythm and minimise interruptions. Robust protection without bulk Made from resilient plastic, the holder offers protection from knocks and contamination while remaining exceptionally lightweight at 0.2 kg. The low mass minimises stress on storage systems and makes handling effortless during tool changes. The material resists common workshop soiling and is easy to wipe clean, preserving the condition of stored components and reducing maintenance of both holder and tooling. Such protection supports consistent clamping performance and prolongs the service life of precision parts. Easy integration into existing setups The holder is designed specifically for VMS-5 collet sleeves and adapts well to established tool-storage arrangements. Its slim profile saves shelf depth and allows several units to be placed side by side, creating modular storage arrays for different sleeve sizes or types. The simple, functional design requires no additional fixtures and can be combined with bench organisers or drawer inserts to form a compact, efficient storage system that helps maintain order in busy shops. Secure organised clamping storage with the Vertex VMS-5 Plastic Holder — contact Metav Werkzeuge in Emmerich for technical advice and reliable supply. Technical Data Article number: VMS-5 GTIN: 4061905084768 Manufacturer: Vertex Machinery Works Co., Ltd. Material: Plastic Dimensions: 220 x 110 x 6 mm Weight: 0.2 kg Facts Dimensions (L x W x H): 220 x 110 x 6 mm Weight: 0.2 kg ECLASS: 21022190 GTIN numeric: 4061905084768 Special features For collet sleeves: VMS-5 Brand: Vertex Compact, low-profile design Easy-to-clean plastic material FAQ How compatible is the holder with different collet sleeve types? The VMS-5 Plastic Holder is designed specifically for VMS-5 collet sleeves and provides correct seating and separation for that sleeve type, ensuring consistent organisation for compatible tooling. What material is the holder made from and how durable is it? The Vertex VMS-5 plastic holder is manufactured from a resilient plastic that resists workshop dirt and provides impact protection while remaining lightweight for easy handling. Can the holder be used in drawers or on open shelving? The slim 220 x 110 x 6 mm profile makes the holder suitable for both drawer storage and open bench shelving, allowing modular arrangement alongside other workshop organisers. Does the holder require special maintenance? Maintenance is minimal: the plastic surface can be wiped clean with a cloth; the design of the VMS-5 holder avoids crevices that trap debris, simplifying routine upkeep. Is the product identified for ordering by a catalogue number or GTIN? Yes, the holder is listed under article number VMS-5 and GTIN 4061905084768 for straightforward procurement and inventory management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
22mm 5C Collet For Precision Workholding, High Accuracy 0.02mm - Vertex
Benefit from precision clamping with a 22 mm nominal diameter, 0.02 mm runout accuracy and a compact 87 mm body for consistent machining results; order the collet directly via Metav Werkzeuge or contact our advisers for tailored guidance. Vertex 5C-22 Collet — 22 mm, 0.02 mm runout accuracy The 5C-22 collet is a precision clamping component for standard 5C toolholders, engineered to deliver repeatable concentricity in workshop and production workholding. High clamping accuracy 0.02 mm Standard 5C tooling interface Nominal diameter 22 mm Compact 87 mm length, 0.21 kg Reliable concentricity for demanding machining The core advantage of this clamping component is its consistent runout accuracy, specified at 0.02 mm, which translates into reduced vibration and improved surface finish during turning, milling or drilling operations. Achieving low radial runout is essential when producing tight-tolerance parts: a stable chucking element minimises tool deflection and repeat machining. The design supports process reliability and helps maintain predictable batch quality over repeated cycles. Standard 5C interface for flexible workholding The unit adopts the widely used 5C standard, enabling straightforward integration with existing spindles and collet chucks common in toolrooms and production lines. Standardisation reduces changeover time and inventory complexity while retaining high precision. The combination of a standard interface and precise internal geometry delivers secure gripping of cylindrical tools and workpieces, supporting efficient setups and repeatable clamping force across different operations. Compact format improves accessibility and handling With a length of 87 mm and a mass of 0.21 kg, the item offers compact dimensions that are advantageous where space is limited or where quick manual handling is required. A shorter clamping element can improve access to confined fixturing arrangements and reduce overhang, which helps preserve concentricity under load. The modest weight also makes handling and rapid tool changes effortless during busy shop-floor routines. Practical identification and traceability For inventory control and procurement the collet is listed under SKU 5C-22 and carries GTIN 4061905090127, allowing clear documentation in purchasing and production systems. The eClass code provided helps classification within technical catalogues. Traceable identifiers support quality management procedures and simplify stock replenishment in larger toolrooms or distribution hubs. Choose the Vertex 5C-22 for dependable precision and contact Metav Werkzeuge in Emmerich for expert advice and reliable supply. Technical data Article number: 5C-22 GTIN: 4061905090127 eClass: 21041712 Manufacturer: Vertex Facts Nominal diameter: 22 mm Runout accuracy: 0.02 mm Length: 87 mm Weight: 0.21 kg Special features Standard 5C collet interface Compact design for improved access Traceable SKU for inventory management FAQ What level of concentricity can be expected from this collet? The Vertex 5C-22 collet is specified with a 0.02 mm runout accuracy, providing reliable concentricity for precision machining tasks. Is the 5C-22 compatible with standard 5C chucks and spindles? Yes, the item uses the standard 5C interface, ensuring compatibility with common 5C chucks and toolholders used in workshops and production. How is the product identified for ordering and inventory? This collet is listed as SKU 5C-22 and can be ordered using GTIN 4061905090127 to guarantee correct supply and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
23mm 5C Collet, Precision 0.02mm Runout, 87mm Length - Vertex
Take advantage of a compact toolholding solution that combines precise concentricity, reliable repeatability and straightforward compatibility with standard 5C toolholding systems. Order the collet directly via Metav Werkzeuge or ask the consultants for application advice. 5C-23 Collet — 23 mm precision collet, 87 mm length (Vertex) A 5C-23 collet for secure clamping of round shanks and small workpieces in general machining applications, designed for consistent concentricity and repeatable toolholding. 23 mm nominal diameter for standard shanks High repeatability with ±0.02 mm accuracy Compact 87 mm overall length for tight setups Lightweight construction at 0.21 kg for easy handling Consistent precision for repeatable machining The collet delivers a high level of precision that supports consistent cycle times and reduces scrap. With a nominal diameter of 23 mm and an indicated accuracy of ±0.02 mm, concentricity is improved when compared with loose or improvised clamping methods. This reliability translates into fewer reworks and a steadier production flow, particularly in batch operations where repeatability matters. The design follows established 5C system standards, ensuring predictable behaviour in the toolholding chain and easier process validation. Compact form that frees up machine space An overall length of 87 mm and a weight of 0.21 kg make the component suitable for setups where space and balance are considerations. The relatively short profile helps maintain clearance in compact spindles and reduces the risk of collisions in multi-axis operations. Being part of the standard 5C family, the component integrates with common collet chucks and arbor arrangements, offering practical compatibility without complex adaptors. The compact design therefore supports both efficient fixturing and safe operation. Simple selection, clear technical reference Specification-focused documentation eases selection and reduces procurement uncertainty. The basic numeric values — 23 mm diameter, ±0.02 mm accuracy, 87 mm length and 0.21 kg weight — provide a concise basis for comparing alternatives and checking machine compatibility. As a Vertex-manufactured tool, the collet aligns with widely used workshop routines for inspection and maintenance; routine checks on runout and clamp condition are sufficient to maintain performance. This makes the product a pragmatic choice for maintenance cycles and shop-floor quality regimes. Contact Metav Werkzeuge in Emmerich for precise specification and availability of Vertex 5C collets, and let the Metav consultants advise on the best toolholding setup for the application Technical Data SKU: 5C-23 GTIN: 4061905090134 Manufacturer: Vertex Core specifications Diameter: 23 mm Length: 87 mm Accuracy: 0.02 mm Weight: 0.21 kg eClass: 21041712 Design & special features 5C collet system Compact overall length for tight setups Standardised toolholding compatibility FAQ What nominal diameter does the collet accept? The collet is specified for a nominal diameter of 23 mm and is identified as the 5C-23 collet from Vertex. How accurate is the clamping concentricity? The Vertex 5C-23 collet is indicated with an accuracy of ±0.02 mm, providing repeatable concentricity for typical workshop applications. Is this collet compatible with standard 5C chucks and arbors? Yes, the component follows the 5C system standard and is intended for use with conventional 5C chucks and arbors. What length should be allowed for the collet in a compact setup? Allow for an overall length of 87 mm when determining clearance and collision envelopes in the machine setup. How heavy is the collet for handling and balancing considerations? The collet weighs 0.21 kg, which assists manual handling and has minimal impact on balance in typical toolholding configurations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
24mm 5C Collet, 0.02mm Accuracy, 87mm Length - Vertex
Combining a concentricity of 0.02 mm, a 24 mm clamping diameter and a compact 87 mm length, the collet ensures repeatable, precision clamping that supports consistent machining quality. Order the 5C-24 collet directly via Metav Werkzeuge or ask our consultants if needed. 5C Collet 24 mm by Vertex — precision clamping for machining The 5C collet 24 mm is a precision clamping tool designed for securing cylindrical tooling and workpieces in conventional and CNC machining applications 24 mm clamping diameter Concentricity ±0.02 mm 87 mm overall length Compatible with standard 5C systems Improved machining results through tighter concentricity A reliable clamping solution reduces radial runout and the associated surface defects; the collet’s concentricity 0.02 mm specification translates into measurable improvements in finish quality and repeatability. By maintaining a stable tool axis, cutting forces remain consistent and tool wear is reduced, which can extend tool life and reduce rework rates. This section highlights the direct production advantage of using a precisely manufactured collet in both serial and single-piece workflows. Seamless integration with established 5C toolholding systems Designed to match the dimensions and mechanical interfaces typical of the 5C standard, the clamping unit’s 24 mm diameter and 87 mm overall length allow straightforward integration into existing collet chucks and fixtures. Compatibility with the common 5C system means reduced setup time and predictable clamping behaviour, supporting faster changeovers and more efficient machine utilisation. The compact format also aids accessibility in tighter spindle arrangements. Practical handling and stability that support uptime With a mass of 0.21 kg, the component is lightweight for handling while retaining the mass distribution needed for stable clamping under machining loads. Manufactured by Vertex, the item benefits from industry-standard production practices that target concentricity and repeatability. The balanced combination of low handling weight and dimensional control helps maintain consistent cycle times and contributes to a dependable production flow. Contact Metav Werkzeuge for compatibility advice and to secure the Vertex 5C-24 collet directly from our Emmerich warehouse Technical Data Article number (SKU): 5C-24 GTIN: 4061905090660 ECLASS: 21041712 Brand: Vertex Facts Diameter: 24 mm Length: 87 mm Weight: 0.21 kg Accuracy: 0.02 mm Special features Type: 5C collet Compatible with standard 5C systems Suitable for securing cylindrical tooling and workpieces FAQ What level of concentricity can be expected from this collet? The Vertex 5C-24 collet is specified with a concentricity of 0.02 mm, which supports precise alignment of tooling and workpieces in machining operations. Which toolholding systems accept this collet? This collet is made to fit standard 5C systems; the 24 mm clamping diameter and 87 mm overall length ensure compatibility with most 5C chucks and fixtures. Is the 5C-24 suitable for high-speed applications? The Vertex 5C-24 collet is designed for stable clamping and low runout; suitability for a specific spindle speed should be confirmed against machine and tooling specifications. How does the collet affect tool life and surface finish? By maintaining a 0.02 mm concentricity, the collet reduces radial runout, which helps to extend tool life and improve surface finish during cutting processes. What are the handling characteristics of the collet? Weighing 0.21 kg, the 5C-24 collet is easy to handle during setup while providing sufficient mass for stable clamping during machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
25mm 5C Collet, Precision 0.02mm Runout, 87mm Length - Vertex
High-repeatability clamping with a 25 mm nominal diameter and 0.02 mm runout tolerance ensures consistent part quality and reduced rework; compact 87 mm length provides access in constrained set-ups. Order the 5C-25 collet directly via Metav Werkzeuge or ask our consultants if needed. 5C-25 5C Collet – 25 mm diameter, 87 mm length (Vertex) The 5C-25 collet is a precision 5C clamping collet designed for secure toolholding in workshop and industrial machining applications *5C standard for broad compatibility *25 mm nominal diameter for robust clamping *Runout tolerance 0.02 mm for consistent concentricity *87 mm length for deep-reach operations Improved process quality through measurable precision A consistent clamp interface reduces scrap and rework; the precision of the construction delivers measurable gains on repeat jobs. The specified 0.02 mm runout indicates the collet’s ability to keep cutters and workpieces close to true centre, which benefits surface finish and tool life. Explained simply, lower runout means less vibration and fewer rejects, so production runs achieve higher first-pass yield and predictable tolerances. Compact dimensions for flexible integration With a 25 mm nominal gripping diameter and an 87 mm overall length, this collet combines compactness with effective clamping force. The 5C standard format ensures compatibility with existing 5C chucks and adaptors commonly used in lathes and milling heads, reducing retrofit effort. At approximately 0.21 kg, the component is light enough for straightforward handling while still offering the mass required for stable clamping, helping to cut changeover times between operations. Robust handling for everyday workshop demands Manufactured to Vertex specifications, the collet is aimed at routine shopfloor tasks where repeatability and operational confidence matter. The simple geometry supports quick inspection and maintenance, keeping downtime to a minimum. Supplied through Metav Werkzeuge, customers benefit from a European quality filter and reliable logistics, which supports uninterrupted production planning and a steady parts supply. Contact Metav Werkzeuge for tailored technical advice on the Vertex 5C-25 collet and to arrange supply from Emmerich with expert consultancy available Technical Data Article number: 5C-25 GTIN: 4061905090677 Manufacturer: Vertex Eclass: 21041712 Facts Diameter: 25 mm Length: 87 mm Runout accuracy: 0.02 mm Weight: 0.21 kg Special features 5C standard collet SKU: 5C-25 High repeatability Compact form factor FAQ What runout can be expected from this collet? The runout is specified at 0.02 mm, which indicates the 5C-25 collet delivers close concentricity for precision machining. Is the collet compatible with standard 5C chucks? Yes. The 5C-25 follows the 5C standard and is compatible with tooling and chucks designed for the 5C format. Which diameter and length does the collet have? The collet has a nominal diameter of 25 mm and an overall length of 87 mm as supplied in the 5C-25 specification. Who supplies this product and where is it manufactured? The collet is a Vertex product distributed via Metav Werkzeuge; refer to the manufacturer details below for full address information. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
26.5mm Rubber Flex Collet For Threading Attachment VTA7, Ø5.36–Ø9mm - Vertex
Take advantage of the combination of secure, damage‑reducing clamping and straightforward workshop checks for uninterrupted threading operations; order the collets directly via Metav Werkzeuge or consult our team for application guidance. Rubber-Flex collets FC for thread-cutting machine VTA7 — secure clamping, compact 26.5 mm diameter Rubber-Flex collets FC for thread-cutting machine VTA7 provide reliable clamping for thread-cutting applications on VTA7 systems and are designed for simple inspection with common workshop calipers Rubber-Flex design for secure gripping For VTA7 thread-cutting machines Compatible with calipers Ø5.36–Ø9 mm Diameter 26.5 mm, length 15 mm Reduced thread damage through elastic clamping The Rubber-Flex collet concept uses an elastic clamping surface that reduces radial point loading, which helps to preserve delicate thread profiles during cutting. By distributing clamping forces more evenly than rigid alternatives, the sleeve minimises distortion and burr formation; this results in consistent thread geometry and fewer rework cycles. The compact 26.5 mm diameter and short 15 mm length support tight tool envelopes and efficient use of spindle space, contributing to dependable throughput in repetitive operations. Engineered for VTA7 machines and rapid inspection Designed specifically for the VTA7 thread-cutting apparatus, this clamping sleeve aligns with common workshop inspection routines: the collet is compatible with handheld calipers in the range Ø5.36–Ø9 mm, enabling quick verification of gripping size and runout without special gauges. The clear compatibility reduces setup uncertainty and shortens quality checks, helping maintain steady production speeds. Where traceability is required, the product is listed under SKU FC-30 and GTIN 4061905086717 for cataloguing and procurement. Simple fit that keeps workshop throughput steady Installation and replacement are kept straightforward by the collet’s compact form factor and standardised interface for the VTA7 unit, which reduces downtime during tooling changes. The design focus on repeatable seating and elastic contact means fewer adjustments between cycles, delivering a practical benefit for workshops that prioritise uptime and predictable performance. The result is a component that supports efficient processes and integrates into existing tool control routines without extensive retraining. For procurement or technical advice on Vertex Rubber-Flex collets (FC-30) contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for reliable supply and application support from Emmerich Technical data SKU: FC-30 GTIN: 4061905086717 Article: Rubber-Flex collets for thread-cutting machine VTA7 Core measurements Diameter: 26.5 mm Length: 15 mm Caliper range: Ø5.36–Ø9 mm eClass: 21041712 Compatibility and features For thread-cutting machine VTA7 Designed for secure, elastic clamping Compatible with handheld caliper inspection Brand: Vertex FAQ Which machines is this clamping sleeve intended for? The Rubber-Flex collet is designed for the VTA7 thread-cutting machine and listed as SKU FC-30 for clear identification in procurement and maintenance records. What are the key dimensions to check during setup? Check the 26.5 mm diameter and 15 mm length; the gripping range is compatible with calipers from Ø5.36 to Ø9 mm for quick workshop inspection. How is runout or grip size verified? Use a handheld caliper within the specified range to verify external dimensions and seating; the collet’s compatibility with standard calipers simplifies routine checks for quality control. Is the product traceable for inventory and ordering? Yes; the collet is identified by SKU FC-30 and GTIN 4061905086717, facilitating ordering, stock management, and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
26.5mm Rubber Flex Collet For Threading Unit VTA7, Ø10.38–Ø14mm - Vertex
Reliable clamping for thread‑cutting operations: the combination of flexible rubber clamping, a precise diameter fit and compact installation length secures workpieces while minimising deformation. Order the collets directly via Metav Werkzeuge or consult our advisers for compatibility checks. Rubber‑Flex collets FC for VTA7 — flexible rubber clamping, precise diameter fit The Rubber‑Flex collets FC for VTA7 are flexible clamping inserts designed for thread‑cutting heads and compact fixtures where gentle, secure clamping is required without damage to soft or finished surfaces. Flexible rubber clamping insert Fits diameters Ø10.38–Ø14 mm Compatible with VTA7 thread‑cutting head Secure holding with minimal workpiece stress The flexible sleeve design provides a gentle yet secure grip, making these collets suitable for fixtures that must avoid marring or distorting delicate components. The Rubber‑Flex concept uses an elastic clamping surface to distribute contact pressure more evenly than hard‑metal alternatives; this reduces the risk of surface damage during thread cutting and makes handling fragile parts straightforward. The result is improved first‑pass quality and fewer rework cycles. Precision fit and quick inspection capability Designed for tight tolerances, the clamping insert accepts diameters from Ø10.38–Ø14 mm, enabling quick checks with a precision caliper and reliable repeatability between setups. The compact construction and defined inner diameter ensure concentricity in rotating applications on the VTA7 head, supporting consistent thread geometry and reduced scrap. The product is supplied as FC‑31, matching standard mounting interfaces for rapid replacement and traceability. Robust performance for production environments The clamping sleeve provides dependable performance in repetitive operations, preserving component finish while maintaining positional stability under cutting forces. Its compact length supports high‑density tooling layouts and simplifies changeovers in tight setups, contributing to uninterrupted production flow. Specified compatibility and a consistent manufacturing standard help integrate the collet into existing tool inventories with minimal adaptation. Contact Metav Werkzeuge today at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability of Vertex FC-31 collets for VTA7 applications and secure a reliable supply for precision clamping needs Technical Data SKU: FC-31 GTIN: 4061905088995 Brand: Vertex Facts Diameter: 26.5 mm Length: 15 mm Suitable diameters: Ø10.38–Ø14 mm EClass: 21041712 Special features Clamping style: Rubber‑Flex flexible sleeve Compatibility: VTA7 thread‑cutting head Application: gentle clamping of finished or delicate workpieces FAQ What is the primary benefit of using these flexible collets? The flexible sleeve design provides secure holding with reduced surface stress, so the Rubber‑Flex collets help preserve finishes and lower rework rates in thread‑cutting tasks. Can these collets be used directly on a VTA7 thread‑cutting head? Yes, the FC‑31 collet is specified for compatibility with the VTA7 thread‑cutting head and matches standard mounting interfaces. What diameter range is supported and how is it checked? The clamping insert supports diameters from Ø10.38 to Ø14 mm, which can be verified using a precision caliper for quick and repeatable inspection. Is the product traceable for procurement and inventory? The collet is listed as SKU FC‑31 with GTIN 4061905088995 to aid inventory management and procurement tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
28mm Collet Chuck For ER Collets With MK Shank - Vertex
Take advantage of the combination of precise ER-16 clamping, a compact 28 mm diameter, and a lightweight construction for reliable toolholding and efficient spindle response. Order the V-401 collet chuck directly via Metav Werkzeuge or ask our consultants for application advice. V-401 collet chuck — ER-16, 28 mm, Vertex V-401 is a compact collet chuck designed for precision toolholding in light to medium machining applications, compatible with ER collets and fitted for a Morse taper shank. ER-16 clamping system Morse taper shank compatibility Compact 28 mm diameter Lightweight 0.2 kg construction Precise clamping for consistent machining results The collet chuck provides repeatable concentricity and stable clamping through the ER-16 system, which secures cutting tools with even radial pressure. This design reduces run-out and vibration, improving surface finish and extending tool life. The engineered grip transfers torque efficiently while maintaining alignment, so milling and drilling operations benefit from consistent results and reduced rework. Simple machine integration and secure mounting Fitted for a Morse taper shank, this collet chuck integrates cleanly into conventional spindles and arbors without complex adapters. The standardized taper interface ensures a snug fit and straightforward removal when needed. Compatibility with standard ER collets streamlines tooling inventories and reduces setup time, supporting a leaner workflow in busy workshops and small production runs. Compact, lightweight design that enhances spindle dynamics With a nominal mass of 0.2 kg and a diameter of 28 mm, the chuck minimises added rotating mass, which helps maintain spindle balance at higher speeds and shortens acceleration time. The reduced inertia benefits high-speed applications and delicate finishing tasks, while the compact footprint allows access in tighter setups where larger toolholders would be obstructive. Reliable brand quality and practical supply advantages Manufactured by Vertex, the chuck is a practical choice for workshops seeking durable clamping solutions without unnecessary complexity. Supplied through Metav Werkzeuge, availability is backed by a European distribution hub and knowledgeable sales engineers, ensuring consistent stock and clear technical information. The overall package supports dependable procurement and straightforward integration into standard tooling systems. For precise application guidance or to purchase the V-401 collet chuck from Vertex, contact Metav Werkzeuge for tailored advice and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: V-401 GTIN: 4061905083877 Facts Diameter: 28 mm Weight: 0.2 kg Clamping system: ER-16 Special features For ER collets with Morse taper shank Brand: Vertex Category: Vertex Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b9/2f/97/63/63972fb9c806fb82109e3515/v-401-main.jpg FAQ What collet type does this chuck accept? The V-401 collet chuck accepts standard ER-16 collets for a wide range of tool shank diameters and offers reliable clamping for typical machining tasks. Is the chuck compatible with a Morse taper spindle? Yes, the chuck is designed for mounting on a Morse taper shank, enabling direct integration into machines that use tapered toolholders. How does the 28 mm diameter influence usage? The compact 28 mm diameter allows access in confined setups and reduces interference in multi-tool arrangements while still providing sufficient rigidity for common operations. Can the V-401 maintain precision at higher speeds? The lightweight construction and balanced design support improved spindle dynamics and help maintain concentricity during higher-speed finishing processes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
28mm ER-16 Collet Chuck for ER Collets With Morse Taper Shank - Vertex
Take advantage of a compact, ER‑16-compatible clamping solution with a Morse taper (MK) shank and a minimal spindle load thanks to the light 0.3 kg construction; these features support reliable, repeatable clamping in constrained setups. Order directly via Metav Werkzeuge or consult the advisors for application-specific guidance. Collet chuck V‑404 — ER‑16 collet system with Morse taper shank (Vertex) Collet chuck V‑404 provides compact, standardised clamping for machining applications that use ER collets and Morse taper mounts ER‑16 collet compatibility Morse taper shank for secure mounting Compact 28 mm diameter for tight spaces Lightweight at 0.3 kg for reduced spindle load Precision clamping for repeatable results The collet chuck is engineered to accept ER‑16 collets, providing a standardised interface that simplifies toolholding selection and inventory. With a Morse taper (MK) connection, the toolholder secures directly into the machine spindle or adapter, enabling a robust taper seat. The compact 28 mm diameter and the low 0.3 kg mass reduce overhang and spindle stress, which contributes to improved dynamic behaviour during turning or light milling operations. These characteristics translate into predictable clamping behaviour and fewer setup adjustments, supporting consistent part quality and throughput. Designed for efficient workshop integration Compatibility with widely used ER collets and a standard taper makes the unit straightforward to integrate into existing toolholder fleets. The standard interface reduces the need for bespoke adapters and allows fast changeovers between operations that use ER‑collet clamping. The restrained outer diameter is especially advantageous where adjacent tool clearance is limited or multiple holders are mounted close together. The result is a practical combination of space efficiency and process continuity that lowers machine downtime and streamlines tool management. Confidence through supply chain and expertise Sourcing this toolholder through Metav Werkzeuge links the product to a European quality filter and a broad offering for professional workshops. The Vertex-branded construction aligns with established manufacturing tolerances and industry practices, and the compact design supports a wide range of light machining tasks. The supply model aims to reduce procurement complexity: reliable stock handling from Emmerich ensures steady availability for production planning and repeat orders, reinforcing operational reliability across the shop floor. Choose the Vertex V‑404 collet chuck for standard ER‑16 clamping and order via Metav Werkzeuge for fast supply and application advice from the team in Emmerich Technical data Article number: V-404 GTIN: 4061905085611 Manufacturer: Vertex Facts Diameter: 28 mm Weight: 0.3 kg Eclass: 21020405 Cone: ER-16 Special features Compatibility: ER collets Shank: MK (Morse taper) Brand: Vertex SKU: V-404 FAQ Is this holder compatible with standard ER‑16 collets? Yes. The V‑404 collet chuck is specified for use with ER‑16 collets and is intended to accept standard ER‑16 collet systems. Can the toolholder be mounted in a Morse taper spindle? Yes. The unit features a Morse taper (MK) shank for direct mounting in compatible spindles or taper adapters. What are the physical dimensions and weight of the holder? The holder has a 28 mm outer diameter and weighs approximately 0.3 kg, making the design compact and lightweight. Is this suitable for clustered tool arrangements on the spindle? The compact 28 mm diameter supports installations where space is limited, helping to position multiple holders close to one another. Which brand manufactures this collet chuck and what is the SKU? The product is manufactured by Vertex and sold under the SKU V‑404. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
28mm ER-16 Collet Chuck With Steep Taper For ER Collets - Vertex
Take advantage of the combination of secure ER-16 clamping, a compact 28 mm profile and lightweight design for reliable, repeatable toolholding in tight setups. Order the collet chuck directly via Metav Werkzeuge or consult the team for specification support. V-741K Collet chuck with steep taper — ER-16, 28 mm The V-741K is a compact collet chuck engineered for precise clamping of ER collets in confined machining environments. Steep taper for secure ER-16 collets Compact 28 mm outer diameter Precise clamping for high repeatability Lightweight 0.45 kg construction Consistent, repeatable clamping for productive machining The steep taper seating of this collet chuck provides a stable interface for ER collets, translating into repeatable clamping and reduced positional variation during serial production. By converting the axial draw-in into uniform radial pressure, the design minimises micro-movements at the toolholder interface. This behaviour benefits applications where consistent concentricity and predictable tool performance are required, such as high-precision drilling and light milling operations. The result is fewer reworks and a more predictable process window for small-batch and series production. Compact footprint that improves access and rigidity A reduced outer diameter of 28 mm and a slim profile make the chuck suitable for toolholders and spindles with limited clearance. The compact form reduces overhang and helps preserve the stiffness of the overall tool assembly, which in turn supports better surface finish and dimensional control. In confined setups, reduced bulk means faster tool changes and easier integration into multi-spindle heads or short-reach toolholders, giving machine shops efficiency gains without compromising machining quality. Lightweight construction with straightforward compatibility At approximately 0.45 kg, the assembly keeps rotating mass low, helping to reduce spindle load and vibration at higher speeds. Compatibility with ER-16 collets ensures a wide range of tool shank diameters can be accommodated with standard collet sets, simplifying stockkeeping and tool management. Manufactured by Vertex, the chuck is intended as a practical component for workshops seeking dependable clamping performance and straightforward interchangeability with established collet systems. Contact Metav Werkzeuge to specify the V-741K collet chuck for ER-16 clamping and secure prompt supply from stock in Emmerich for immediate integration into production setups Technical data Article number: V-741K GTIN: 4061905086113 Product: Collet chuck with steep taper for ER collets Cone: ER-16 Diameter: 28 mm Weight: 0.45 kg EClass: 21020405 Facts Diameter: 28 mm Weight: 0.45 kg Cone type: ER-16 Special features Suitable for ER collets Steep taper seating for secure clamping Compact outer diameter for tight access Lightweight design for reduced rotating mass Brand: Vertex FAQ How does the steep taper affect clamping performance? The steep taper in the V-741K concentrates axial draw-in into uniform radial pressure on the ER collet, improving seating stability and therefore clamping repeatability during machining. Which collet series is compatible with this chuck? This chuck is designed for use with ER-16 collets, allowing standard ER-16 collet sets to cover a range of tool shank diameters. Can the compact diameter improve toolholder rigidity? Yes, the reduced 28 mm profile helps to minimise overhang and maintain a stiffer assembly, which supports better dimensional control and surface quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
28mm ER-16 Collet Chuck With Steep Taper, Quick-Change – Vertex
Take advantage of the combination of reliable precision clamping and a compact 28 mm footprint for consistently high concentricity in small toolholders. Order directly via Metav Werkzeuge or ask the consultants for compatibility and integration advice. Collet chuck V-741 — ER‑16 steep taper, compact 28 mm diameter, Vertex A collet chuck V-741 designed for secure clamping with ER‑16 collets, suited to precision machining centres and compact toolholders. Steep taper for ER-16 collets Compact 28 mm diameter Robust construction, 1.5 kg weight Precision clamping for concentricity Reliable clamping for repeatable results A compact clamping solution that focuses on precision and repeatability. The steep taper interface and compatibility with ER‑16 collets reduce axial and radial movement, improving concentricity on short tool overhangs. For operations where part tolerances are tight, this type of collet chuck minimises rework by securing tools with consistent grip force; the result is fewer rejects and more predictable cycle times. Technical stability is achieved without complex adjustment, which supports steady production in small-batch and medium-volume environments. Compact footprint with enhanced rigidity The small 28 mm diameter makes the chuck easy to integrate into compact spindles and multi‑tool heads while maintaining mechanical rigidity. The modest mass of 1.5 kg contributes to low rotating inertia, which can help preserve spindle response and balance. The steep taper design increases contact area between the chuck and the collet, converting clamping force into higher stiffness at the cutting edge. This configuration benefits high‑precision finishing and light machining tasks where both space and stiffness are at a premium. Time saving through reduced setup and maintenance Designed for workshop efficiency, the chuck supports fast collet changes and straightforward cleaning, reducing downtime between operations. Improved run‑out stability lowers the need for frequent tool re‑setting and inspection, while the simple mechanical design keeps routine maintenance minimal. For fleet managers and production planners, the predictable behaviour of this toolholder aids scheduling and reduces the total time spent on setup and troubleshooting over the life of the tool. Practical applications and safe handling in everyday use Ideal for small milling, drilling and turning tasks, the chuck suits jobs that demand accurate tool holding in tight spaces. ER collets are versatile: a single collet system accommodates a range of tool shank sizes while maintaining clamping accuracy. The steep taper helps translate axial tightening into uniform radial pressure around the tool shank, which is especially useful when machining short cutters or reamers. For safe operation, ensure collets and tools are clean and undamaged before assembly to retain the declared performance characteristics. Contact Metav Werkzeuge in Emmerich to confirm compatibility with existing toolholders and to arrange supply of the Vertex V‑741; technical consultants are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: V-741 GTIN: 4061905084218 Brand: Vertex Data Diameter: 28 mm Weight: 1.5 kg ECLASS: 21020405 Taper: ER-16 Special features Steep taper for ER‑16 collets Compatible with ER collet system Compact design for small toolholders FAQ Which collet series fits this chuck? The chuck is designed for the ER‑16 collet series; Vertex V‑741 accepts ER‑16 collets for a range of tool shank diameters. Is the V‑741 suitable for high‑speed spindles? The V‑741 provides a compact, low‑inertia interface; suitability for high speeds depends on specific spindle limits and balancing of the complete tool assembly. How does the steep taper affect clamping performance? A steep taper improves contact pressure transmission and rigidity, so the Vertex V‑741 delivers consistent clamping force and reduced run‑out in short overhang applications. Can the chuck be used in milling and turning machines? Yes, this collet chuck is appropriate for milling, drilling and light turning in setups where ER‑16 collets and a compact 28 mm holder are required. What should be checked before assembly? Inspect collets and tool shanks for cleanliness and damage; the Vertex V‑741 performs best when components are free of chips and burrs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
28mm ER-16 Collet Chuck With Straight Shank For ER Collets - Vertex
Take advantage of the combination of secure ER-16 taper clamping, compact 28 mm diameter and stable mass for consistent toolholding and improved process reliability. Order the collet chuck directly via Metav Werkzeuge or consult our advisors for application-specific guidance. V-741B ER-16 collet chuck with steep taper, 28 mm diameter — Vertex A compact V-741B collet chuck engineered for high-precision toolholding in machining centres and compact setups, designed to accept ER-series collets via a steep ER-16 taper. ER-16 steep taper for secure clamping 28 mm external diameter for compact set-ups 3.5 kg mass for vibration damping Compatible with ER collets for flexibility Stable clamping for repeatable precision The steep ER-16 taper ensures a concentric, low-runout connection between spindle and tooling, delivering stable clamping that improves repeatability in serial machining. By concentrating on the mechanical interface rather than electronic compensation, this collet system reduces micro-movement at the cutting point and supports tighter tolerances. The design is particularly suitable where consistent concentricity and minimal tool offset are required, such as finishing passes or when machining small-diameter tools. Flexible compatibility that simplifies tooling choices Compatibility with standard ER collets provides broad tooling support across milling, drilling and light reaming operations, enabling efficient changeovers and reduced tooling inventory. The compact 28 mm external diameter makes the device suitable for confined spindle noses and close-fixture arrangements. For workshops aiming to standardise on ER systems, the chuck serves as a versatile interface that keeps tooling costs predictable and stock management straightforward. Robust mass and geometry to reduce vibration and improve surface finish A measured mass of 3.5 kg contributes to the overall stability of the assembly, helping to damp vibrations that can affect surface finish and tool life. The combination of mass and steep taper geometry lowers chatter tendency under medium-duty cutting conditions, supporting improved surface quality and longer tool life. Where surface finish and cycle consistency matter, the toolholder design contributes directly to production reliability and reduces rework rates. Contact Metav Werkzeuge to discuss the Vertex V-741B collet chuck and obtain tailored application advice or compatibility checks via info@metav-werkzeuge.com or by phone Technical data SKU: V-741B GTIN: 4061905087097 Brand: Vertex Key measurements Diameter: 28 mm Weight: 3.5 kg Taper: ER-16 eCl@ss: 21020405 Special features Steep taper for ER collets Designed for ER-series collet compatibility Compact external diameter for tight set-ups FAQ What collet series is compatible with the chuck? The chuck accepts standard ER-series collets and is specified for ER-16 compatibility to suit common ER tooling systems. Can the V-741B be used in compact spindle noses? Yes, the 28 mm external diameter makes the unit suitable for compact spindle configurations and close-fixture arrangements. How does the chuck affect runout and precision? The steep ER-16 taper and precise interface design minimise runout, improving concentricity and repeatability for precision machining tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
28mm ER-16 Collet Chuck With Taper For ER Collets, Steep Taper - Vertex
Maximise clamping accuracy and repeatability by combining the ER-16 taper with a rigid 28 mm diameter body and robust 1.1 kg construction; this ensures stable tool holding and consistent surface finishes. Order the part directly via Metav Werkzeuge or consult our specialists for application advice. V-742C collet chuck — precision clamping with ER-16 taper (Vertex) V-742C collet chuck for reliable clamping of ER collets in machining and milling applications ER-16 taper for standard ER collets 28 mm body diameter for increased rigidity Precision-ground bore for low runout Robust 1.1 kg construction for stable operation Stable clamping that reduces rework and scrap The steep taper and standard ER-16 interface deliver a consistently centred clamping point, translating into lower radial runout and fewer rejected parts. By converting the interface precision into measurable repeatability, the system reduces machining variance and the need for post-process corrections. The design focuses on measurable outcomes—repeatable positioning and dependable concentricity—so production tolerances are maintained with less adjustment. Rigidity that improves surface finish and tool life A larger body diameter of 28 mm increases stiffness at the spindle nose, dampening vibrations that shorten tool life or compromise surface quality. The substantial 1.1 kg mass contributes to a stable cutting environment, allowing higher feed rates and more aggressive cuts without sacrificing finish. This improved stability not only enhances component quality but also lengthens cutter life, delivering operational savings over time. Straightforward integration into ER-based tool systems Designed for direct use with ER collets, the chuck fits routine tooling setups and minimises changeover time. The collet interface remains compatible with established ER tooling, simplifying inventory and enabling faster tool changes on milling heads and machining centres. Clear mechanical compatibility reduces the need for adapter parts, supporting a cleaner, more efficient workstation layout. Durable design that supports continuous production Manufactured to provide a long service life, the component’s construction makes it suitable for daily industrial use and repetitive cycles. The robust build reduces the frequency of replacements and contributes to predictable maintenance planning. In combination with Metav’s quality control and supply chain reliability, the component supports uninterrupted workflows and dependable parts supply for busy shops. Contact Metav Werkzeuge in Emmerich to discuss integrating the Vertex V-742C collet chuck with your ER-16 tooling and to receive tailored selection advice Technical data SKU: V-742C GTIN: 4061905087820 Name: Collet chuck with steep taper for ER collets Facts Diameter: 28 mm Weight: 1.1 kg Taper: ER-16 Special features Suitable for ER collets Precision-ground bore Robust construction for industrial use FAQ What collets are compatible with this chuck? The Vertex V-742C collet chuck is compatible with standard ER collets that fit an ER-16 taper, allowing straightforward use with commonly stocked ER tooling. How does the 28 mm diameter affect machining performance? A 28 mm body diameter increases rigidity and reduces vibration, which improves surface finish and extends tool life when using the V-742C collet chuck from Vertex. Is the chuck suitable for automated tool changes? Yes, the ER-16 taper and standard interface enable integration with automated change systems where ER tooling is already in use, aiding fast and reliable tool swaps. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
3-Backen Spannfutter, selbstzentrierend
Im Lieferumfang enthalten: 2 Sätze aus soliden Backen
Precise, repeatable clamping for high-speed machining
Collets provide radial, 360-degree clamping that secures cylindrical tools and rod-shaped workpieces with outstanding concentricity and holding force. Designed from high-grade spring steel, these split clamping elements combine excellent runout accuracy with the grip required for vibration-reduced high-speed cutting (HSC) on modern CNC mills and turning centres.
How collets work and where they add value
The clamping principle relies on the radial elasticity of the split collet: when the collet is pushed into a tapered seat—either by tightening a nut in a collet chuck or by a pull stud and drawbar action—the slots constrict uniformly and the bore closes concentrically around the tool or workpiece. This uniform, full-circumference contact prevents pressure marks that occur with side clamping and ensures superior balance for demanding machining tasks. Typical applications include toolholding for end mills and twist drills, and direct spindle mounting for series turning using workholding collets such as 5C.
Practical benefits that improve shop performance
- Improved concentricity and runout for higher surface quality and longer tool life
- Uniform 360-degree force transmission, preventing shaft damage and reducing vibration
- Fast changeover and wide gripping ranges, reducing setup time and improving throughput
- Compatible with standard systems such as ER standard collets and 5C workholding solutions
- Suitable for high-speed cutting and applications requiring high dynamic balance
Metav: workshop precision made accessible
Metav combines decades of measurement and tooling expertise with a comprehensive range that simplifies procurement. Based in Emmerich, Metav operates as a quality filter for the European market and supports more than 48,000 customers. With over 250,000 products available, Metav supplies collets, collet chucks and complementary tooling from a single source—reducing supplier complexity and ensuring reliable delivery straight to the shop floor.
Technical data at a glance
- material: high-grade spring steel
- clamping principle: radial elasticity, split collet design
- force distribution: 360-degree force transmission
- compatibility: ER standard collets; steep taper and Morse taper chuck interfaces
- workholding types: toolholding collets, 5C workpiece collets, pull-stud/drawbar systems
- typical set content: collet range, collet chuck with taper, tightening wrench, protective storage case
- application: high-speed cutting (HSC), CNC milling, CNC turning, series bar turning
- advantages: reduced vibration, high dynamic balance, material-friendly clamping
FAQ
What are the main differences between ER collets and 5C collets?
ER collets are typically used for toolholding in collet chucks and offer a broad gripping range for taper-mounted chucks, while 5C collets are common as workpiece-holding collets for direct spindle mounting in lathes and fixture systems.
Can collets handle high-speed machining?
Yes. Collets made from high-grade spring steel, offering uniform clamping and excellent dynamic balance, are well suited to high-speed cutting (HSC) applications on modern CNC centres.
How does the 360-degree clamping benefit surface finish and tool life?
The full-circumference contact distributes clamping forces evenly, preventing localised deformation and vibration; this improves surface finish and extends tool life thanks to reduced runout and better balance.
Why choose Metav for collets and tooling?
Metav combines hands-on industry expertise with a broad product range and a strict quality filter in Emmerich, making it a dependable partner for procuring collets, collet chucks and associated tooling for professional workshops.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com