Precision collets for repeatable, high-speed clamping
Precision collets and collet chucks provide concentric, damage-free clamping of cylindrical tools and bar stock, ensuring outstanding runout and vibration control for modern CNC milling and turning. Designed from spring steel, these collets use radial elasticity to deliver 360-degree gripping force, which prevents shaft marks and enables vibration‑reduced high‑speed machining while shortening setup times. As a fundamental component in metalworking, collets excel in both toolholding and workholding applications, offering flexibility across ER‑style systems and pull‑type work collets. Key benefits include excellent concentricity, robust holding power and suitability for high‑precision serial production.
ER-16 Collet Chuck R8 Shank Quick-Change, ER-16 Collet Holder - Vertex
Benefit from the combination of ER-16 clamping, an R8 shank and a compact 0.5 kg design for secure, repeatable toolholding in small spindle applications; order the Vertex V-301 via Metav Werkzeuge or consult the technical team for tailored application advice. V-301 Collet Chuck (ER-16, R8 shank) — Vertex The V-301 collet chuck provides precise clamping for small-diameter tooling in R8-spindle milling and drilling applications. ER-16 clamping for high positional accuracy R8 shank for common milling spindle compatibility Compact, lightweight design 0.5 kg Suitable for small-diameter tooling Consistent concentricity for reliable machining The ER-16 configuration delivers precise clamping with a focus on minimising lateral runout, which improves surface finish and tool life. By using an ER-16 system, the chuck secures collets evenly around the tool shank, reducing vibration and enhancing repeatability. This results in fewer rework cycles and a steadier production rhythm, particularly when working with small cutters or drills where concentricity is critical. The engineering supports predictable outcomes in repetitive tasks and short-run production. Straightforward compatibility with R8 spindles Designed with an R8 shank, the chuck is compatible with a broad range of standard milling and drilling spindles used in many workshops. The R8 interface simplifies installation and replacement, enabling rapid changeovers between holders without special adapters in typical R8 setups. Compatibility with established spindle standards helps maintain machine uptime and reduces the need for multiple specialised holders, supporting efficient tool management across varied tasks. Compact construction that eases workshop handling The compact, lightweight construction (approx. 0.5 kg) reduces inertia on smaller spindles, improving responsiveness during rapid feeds and tool changes. A lighter holder also makes manual handling and setup easier, lowering the risk of accidental damage during mounting. Coupled with the ER-16 system, the design supports secure clamping for small-diameter tools while keeping overall mass to a minimum, which benefits both manual and CNC environments that demand agile, precise tooling. Choose the Vertex V-301 for compact, accurate clamping and contact Metav Werkzeuge in Emmerich for expert advice or webshop ordering assistance via info@metav-werkzeuge.com Technical data Article number: V-301 GTIN: 4061905084508 Manufacturer: Vertex Net weight: 0.5 kg Cone: ER-16 Shank: R8 Facts Weight (kg): 0.5 EClass: 21020405 Special features R8 shank ER-16 collet system Compact construction Suitable for small-diameter tooling FAQ Which collet series fits this chuck? The V-301 uses the ER-16 collet series; ER-16 collets are the correct choice for clamping with this Vertex collet chuck. Can this holder be used in standard R8 spindles? Yes, the R8 shank on the V-301 is designed for direct use in standard R8 milling and drilling spindles. How does the chuck affect runout and tool life? The ER-16 clamping geometry on the Vertex V-301 is intended to reduce lateral runout, which helps improve surface finish and extend tool life under normal operating conditions. Is the V-301 suitable for small workshops and mobile setups? The compact and lightweight design (0.5 kg) makes the V-301 well suited to small workshops and environments where easy handling and fast tool changes are beneficial. Where to find more detailed specifications or part numbers for collets? Further technical details and compatible collet part numbers are listed on the product page for the V-301 in the Metav Werkzeuge webshop Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-16 Collet Chuck Set R8 Holder 10 pcs, ER16 Collets Set - Vertex
Precision clamping with a direct R8 interface and ER-16 compatibility provides consistent gripping force and dependable repeatability; the compact 10-piece set reduces setup time and simplifies tooling logistics. Order the V-311 directly via Metav Werkzeuge or consult our technical advisors for specification matching and availability. V-311 Collet Chuck with R8 Shank and ER-16 Compatibility by Vertex The V-311 is a collet chuck designed for R8 spindles, combining compact form with precise ER-16 clamping for general machining and toolholding tasks. R8 shank for direct spindle mounting ER-16 collet system for precise clamping Delivered as a 10-piece set for quick setup High-accuracy clamping for consistent machining results The collet system ensures concentric gripping and repeatability across batch runs, reducing rework and setup variation. Built for ER-16 tooling, the chuck delivers a uniform clamping force that minimises runout; this precision translates into improved surface finish and tighter tolerance control on turned or milled parts. For operators unfamiliar with collet nomenclature, ER-16 denotes a standard series of collets suitable for smaller-diameter tools, offering a compact and accurate clamping solution. Streamlined workflow through direct mounting and set format With an integrated R8 shank, the holder mounts directly into compatible spindles for fast changeovers and stable tool engagement. Supplied as a 10-piece set, the configuration supports rapid tool swaps and reduces the need for individual procurement of multiple holders. The compact mass of 1.5 kg contributes to straightforward handling and storage, while the set format helps maintain a consistent inventory of matched clamping components for production lines and small-batch workshops. Durable construction and trusted manufacturing pedigree Manufactured by Vertex, the unit is engineered for predictable performance and long-term serviceability, supporting continuous shop-floor operation. The design philosophy focuses on robust toolholding with straightforward interchangeability between collets and the chuck body, helping to extend tool life and maintain machining accuracy. Sourcing via a dedicated distributor ensures a controlled quality filter and reliable supply into European workshops. For reliable ER-16 clamping with an R8 interface, request the Vertex V-311 through Metav Werkzeuge for expert advice and delivery from Emmerich. Technical Data Article number: V-311 GTIN: 4061905091131 Manufacturer: Vertex Facts Weight: 1.5 kg Pieces per set: 10 eClass: 21020405 Special features R8 shank Compatible with ER-16 collets Set format (supply as a set) FAQ Which collet series fits this holder? The V-311 collet chuck is compatible with ER-16 collets, providing standardised clamping for small-diameter tools and cutters. What spindle interface does the holder use? The toolholder features an R8 shank for direct mounting to R8-compatible spindles, ensuring stable engagement. Is the product supplied individually or as a set? This article is supplied in a 10-piece set, simplifying procurement and enabling quick tool changes. What is the weight and SKU of the product? The Vertex V-311 toolholder weighs 1.5 kg and is listed under SKU V-311. Which applications suit this collet chuck? The V-311 is intended for general machining and toolholding tasks where precise, repeatable clamping of small tools is required; common applications include drilling, reaming and finishing operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-16 Collet Set 8 Pieces R8 Shank, With R8 Adapter - Vertex
Take advantage of the combination of secure ER-16 clamping, universal R8 mounting and compact construction (1.45 kg) for reliable small-tool performance; order the item directly via Metav Werkzeuge or request tailored advice from our consultants. V-312 Collet chuck with R8 shank (ER-16) — Vertex V-312 is a compact collet chuck with an R8 mounting designed for precise clamping of small-diameter tooling in conventional milling and drilling setups R8 shank for conventional milling spindles ER-16 collet compatibility for small tools Supplied as an 8-piece set Solid build, 1.45 kg total weight High-precision clamping for small tools and micro-machining The clamping unit uses the ER-16 collet system, which is optimised for small-diameter cutters and drills. This format ensures a secure, concentric hold that reduces runout and promotes consistent surface finish on delicate components. For workshops processing precision parts, the reduced radial error from an ER-style collet translates directly into fewer rejects and less rework. The combination of compact form and repeatable clamping makes the unit particularly suited to toolrooms and small-batch production where accuracy matters more than brute-force cutting. Versatile R8 mounting for broad machine compatibility Fitted with an R8 shank, the chuck is compatible with a wide range of manual and small CNC milling machines that accept R8 tooling. The R8 interface offers a straightforward retrofit option where modern taper holders are not available, enabling older spindles to accept solid clamping solutions without complex adapters. This compatibility extends workshop flexibility, allowing shops to standardise on ER collets while keeping spindle inventories lean. The R8 mount also contributes to a compact spindle envelope, aiding access in tight setups and simplifying tool changes on manual machines. Ready-to-use set that streamlines procurement and uptime Delivered as an 8-piece set, the package reduces the need for multiple orders and speeds up initial deployment at the bench. The set format supports efficient stocking and ensures that a range of common small diameters can be clamped without delay. The chuck’s overall mass of 1.45 kg balances rigidity with ease of handling during setup and removal, improving workshop ergonomics and reducing downtime during tool changes. For procurement managers the clear bill of materials and the set configuration simplify ordering and inventory control, contributing to a leaner supply chain. Contact Metav Werkzeuge for a bespoke quotation or technical consultation on the Vertex V-312 collet chuck and benefit from local stock and reliable delivery from Emmerich Technical data SKU: V-312 GTIN: 4061905093098 Brand: Vertex Facts Weight: 1.45 kg Mounting: R8 Collet type: ER-16 Special features Supplied as a set: 8 pieces Image available FAQ Is the chuck compatible with R8 spindles? Yes. The Vertex V-312 collet chuck features an R8 mounting for use in machines and holders that accept the R8 interface. Which collet standard is used with this clamping unit? The unit accepts ER-16 collets, making it suitable for small-diameter cutters and drills where concentricity is critical. Does the delivery include multiple collets? The item is supplied as an 8-piece set, providing a ready selection of clamping options for small tooling sizes. Is the chuck suitable for high-precision finishing operations? With ER-16 clamping and a compact construction, the chuck offers the repeatability and low runout desirable for precision finishing and micro-machining tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-16 Collet Set With Collet Chuck For MK Spindle, 8 Pieces - Vertex
Take advantage of a compact ER-16 collet system and a Morse taper arbor for reliable clamping and consistent machining results; the set format ensures quick tool changes and improved process repeatability. Order the collet set directly via Metav Werkzeuge or consult the advisors for application-specific guidance. Vertex V-420 Collet set — ER-16 with Morse taper arbor The V-420 is a versatile ER-16 collet set supplied with a Morse taper arbor, designed for precise clamping in general workshop milling and drilling applications ER-16 collets for accurate clamping Morse taper shank for broad compatibility Comprehensive set for routine workshop tasks Robust design built for frequent use Reliable clamping that keeps tolerances tight A well-matched clamping solution reduces run-out and improves part accuracy — the ER-16 system is engineered for concentric grip on cylindrical tool shanks, ensuring precision across repeated setups. Collets distribute clamping forces evenly around the tool, which lowers the risk of bending or chatter; this translates directly into more consistent surface finish and fewer rejects. For users with limited metrology experience, the collet principle can be summarised as a self‑centering sleeve that holds tools with high repeatability. Simple integration with standard machine spindles The included Morse taper arbor provides a conventional interface that fits many machine spindles and adaptors, making integration straightforward without special modifications. Morse taper connections rely on matching taper geometries to secure the chuck mechanically, which means the chuck remains firmly seated under load while still allowing uncomplicated removal for tool changes. This compatibility reduces adapter inventory and supports faster changeovers in mixed production environments. Practical design for everyday workshop routines Weighing approximately 1.1 kg, the set is compact enough for routine handling and storage while remaining substantial in build for reliable daily operation. The set format consolidates commonly used clamping sizes for efficient tool management and streamlines setup sequences at the bench or on the machining centre. Fewer interruptions for tool swapping and clearer organisation of tooling leads to smoother workflows and measurable time savings during batch runs. Performance that benefits production planning Investing in a consistent clamping system helps stabilise machining processes and supports predictable cycle times — an important consideration when planning jobs and allocating capacity. With a recognised brand such as Vertex behind the components, the collet set contributes to a dependable tooling supply that reduces uncertainty on the shop floor. For procurement and operations, this means fewer unplanned stoppages and a clearer basis for long‑term process optimisation. Contact Metav Werkzeuge for application advice on the Vertex V-420 collet sets and receive tailored recommendations from our Emmerich quality team Technical Data Article number: V-420 GTIN: 4061905085574 Manufacturer: Vertex Facts Cone: ER-16 Weight: 1.1 kg Pieces per set: 8 Special features Collet chuck with Morse taper arbor Set of ER-16 precision collets Designed for reliable clamping of tool shanks FAQ What taper does the collet set use and why is it important? The V-420 collet set uses a Morse taper arbor; the Morse taper provides a widely accepted mechanical interface that secures the chuck in many spindles and adaptors without additional fixation. Which collet size standard is included in the set? The set is based on the ER-16 collet standard, offering accurate concentric clamping suitable for small to medium shank diameters commonly used in workshops. How many items are included in the set? This Vertex set contains eight pieces per set, arranged to cover a useful range of clamping sizes for routine tasks. Is the set suitable for frequent tool changes in production? Yes — the ER-16 system combined with the Morse taper arbor supports rapid tool changes and stable clamping behaviour, which helps maintain cycle consistency in production runs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-16 Collet Set With Collet Chuck, 10 Pieces – Vertex
Take advantage of reliable toolholding with the combination of ER-16 clamping accuracy, a Morse taper adaptor and a set of 10 collets for streamlined changeovers; order the Collets V-419 directly via Metav Werkzeuge or ask our consultants if needed. Collets V-419 — ER-16 set with Morse taper adaptor by Vertex The Collets V-419 are a compact collet set supplied with an ER-16 collet chuck and a Morse taper adaptor, designed for secure toolholding and quick spindle changes across conventional milling and drilling setups. ER-16 collet system Includes Morse taper adaptor Complete set of 10 collets Compact and workshop-ready Consistent concentricity for reliable production The ER-16 collet system provides a high level of precision and concentricity compared with many alternative clamping methods. By gripping the tool shank uniformly, the design reduces run-out and improves repeatability, which in turn lowers scrap rates and shortens setup times. For operations that rely on consistent hole quality or repeatable milling paths, reliable clamping directly enhances part accuracy and process stability. Morse taper adaptor for flexible machine fitting A Morse taper adaptor is included with the set, allowing the collet chuck to be mounted in spindles or adaptors that accept MT fittings. The taper principle creates a self-locking fit that transmits torque and dampens vibration without additional fixtures, making the connection both secure and straightforward to mount or dismantle. This compatibility extends the range of machines and tooling arrangements where the set can be put to practical use. Complete kit to reduce changeover time Delivered as a set of 10, the package contains a matched assortment for common shaft sizes and a ready-to-use collet chuck, enabling fast changeovers and reduced downtime on the shop floor. The compact kit weighs 1.5 kg, which keeps storage and handling simple while offering a full complement for basic production and maintenance tasks. Where a bench or toolroom requires straightforward, repeatable clamping, this configuration supports efficient workflows. Practical guidance for long service life Routine care keeps clamping performance stable: keep contact surfaces free from chips and coolant residue, inspect for nicks before assembly and store collets dry to avoid corrosion. The included collet chuck simplifies insertion and removal of tools and—when combined with correct seating in the taper—ensures stable clamping forces and prolonged service life. For compatibility checks refer to the ER-16 specification and the Morse taper standard applicable to the machine spindle. Contact Metav Werkzeuge for procurement guidance on the ER-16 collet set V-419, compatibility checks or tailored advice from our Emmerich team Technical Data Article number: V-419 GTIN: 4061905085215 Brand: Vertex Weight: 1.5 kg Facts Pieces per set: 10 Cone: ER-16 Set: yes Special features Includes collet chuck with Morse taper adaptor Suitable for precision toolholding FAQ What is included in the set? The set contains ten ER-16 collets plus a matching collet chuck supplied with a Morse taper adaptor as delivered with the Collets V-419. Which machines are compatible with this kit? Machines that accept an ER-16 collet chuck or a spindle with the corresponding Morse taper can be used with the V-419 set, providing broad compatibility for conventional milling and drilling equipment. How does clamping accuracy perform with these collets? The ER-16 system used in the V-419 offers high concentricity and repeatability for consistent results in production and maintenance tasks. Is this set suitable for workshop use and frequent tool changes? Yes. The complete set of 10 collets and the included collet chuck make the V-419 convenient for routine workshop changeovers and maintenance procedures. What maintenance is recommended for long-term reliability? Keep contact surfaces clean and dry, inspect collets for damage before use and ensure correct seating in the Morse taper to preserve clamping performance with the V-419. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-16 Collet Set With Collet Chuck, 8 Pieces — Vertex
Die Kombination aus präziser ER‑16-Technik, einer praktischen MK‑Aufnahme und einem vollständigen Satz passender Spannzangen sorgt für wiederholbare Spanngenauigkeit und kürzere Rüstzeiten in der Werkstatt. Bestellungen und fachliche Beratung erhältlich direkt über Metav Werkzeuge. V-413 collet set — ER‑16 collet kit with collet chuck and Morse taper arbor (Vertex) The V-413 collet set supplies a complete clamping solution for routine milling and drilling tasks, combining ER‑16 geometry with a collet chuck mounted on a Morse taper arbor to fit common machine spindles. ER‑16 collets for precision clamping Collet chuck with Morse taper arbor Set contains eight matched collets Compact 1 kg total weight for workshop use Dependable precision that reduces setup rework The ER‑16 geometry and manufactured tolerances deliver consistent clamping accuracy, reducing run‑out and the need for repeated adjustments. By stabilising tools close to the spindle, the clamping system improves surface finish and dimensional conformity, which in turn lowers scrap rates and inspection effort. The matched nature of the kit ensures that each collet seats concentrically, maintaining performance across successive tool changes. Faster changeovers and broad spindle compatibility A collet chuck supplied with a Morse taper arbor enables rapid tool swaps and straightforward integration with conventional milling spindles and drilling machines. The system’s design supports quick release and reseating of tools, shortening machine downtime and increasing usable spindle hours per shift. For production environments where throughput and predictable cycle times matter, the clamping kit delivers a measurable efficiency gain. Robust tolerances for workshop conditions Manufactured to industry standards for clamping components, this collet kit stands up to daily workshop use while keeping machining quality stable. The construction focuses on repeatability rather than unnecessary complexity, providing a reliable clamping interface between tool and spindle. Such practical durability means fewer surprises in process capability studies and a dependable basis for repeat runs. Organised set to streamline tooling management Supplied as a matched set, the kit simplifies inventory and reduces the need to source individual collets and adapters. The coherent package keeps compatible components together, which eases tool crib management and ensures that correct clamping parts are always at hand when cycle times are tight. For small and medium workshops aiming to reduce supplier complexity, this approach supports operational continuity. Choose the Vertex ER‑16 collet kit through Metav Werkzeuge for dependable workshop clamping — contact Metav Werkzeuge for personalised advice or to secure availability from our Emmerich stock. Technical Data SKU: V-413 GTIN: 4061905085796 Manufacturer: Vertex Product type: Collet set Cone designation: ER‑16 Core data Weight: 1 kg Pieces per set: 8 eClass: 21022190 Special features Includes collet chuck with Morse taper arbor ER‑16 collets supplied as a matched set Supplied as a complete clamping kit for workshop use FAQ What machines is the kit compatible with? The V-413 collet set is designed for machines that accept a Morse taper arbor and ER‑16 collets, making it suitable for many conventional milling and drilling spindles. How many collets are included in the set? The set contains eight matched collets supplied with the collet chuck and Morse taper arbor for a complete clamping solution. Can the collets be replaced individually? Individual collets within the V-413 kit can be removed and replaced if wear or damage occurs; spare ER‑16 collets are compatible with the supplied chuck. Does the kit improve concentricity compared with standard chucks? Yes, the matched ER‑16 collets and collet chuck are engineered to reduce run‑out and enhance tool concentricity compared with non‑precision chucks. Is the set suitable for production environments? The Vertex collet kit is intended for regular workshop and production use where repeatable clamping accuracy and quick changeovers support consistent output. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-20 Collet Set 12 pcs With Collet Chuck Mounting - Vertex
Benefit from precise clamping, modular compatibility and a ready-to-use 12-piece set that streamlines tool changes and reduces setup time; order the V-414 collet set directly via Metav Werkzeuge or consult our specialists for application guidance. V-414 Collet Set (ER-20) with Morse Taper Mounting by Vertex The V-414 collet set delivers precision clamping via an ER-20 system combined with a collet chuck featuring a Morse taper mounting for robust, repeatable tool retention in workshop and production environments. Precision ER-20 clamping Includes Morse taper chuck Complete 12-piece set Ideal for workshop and production High-precision clamping for consistent results The ER-20 collet design ensures precise concentricity and secure tool retention, translating into improved part quality and fewer rejected components. By using a standard ER-20 interface, the system provides reliable repeatability in clamping, which reduces the need for frequent re-measurement and correction during batch production. The integrated collet chuck converts the collets into a rigid connection with the machine spindle, helping to maintain cutting accuracy under varying loads and speeds. Ready-to-fit set that reduces downtime Supplied as a 12-piece set, the kit includes the collets and the chuck mounting finished for a Morse taper connection, allowing quick installation into machines with MT sockets. The set format keeps common clamping sizes at hand, decreasing tool change time and inventory complexity. With the Morse taper interface, the chuck can be seated securely in compatible spindles for high rigidity, while the modular nature of the kit supports a streamlined workflow and predictable setup times in mixed-production environments. Built for workshops and small-series production Designed for mechanical workshops and light-production lines, the kit offers a dependable clamping solution compatible with standard ER-20 tooling. The construction supports repeated use under normal workshop conditions and integrates with existing tooling inventories without special adapters. Backed by Vertex manufacturing standards and supplied through Metav Werkzeuge, the package supports the democratisation of precision: high-accuracy clamping accessible for independent workshops as well as trade buyers seeking consistent, repeatable results. Speak to Metav Werkzeuge in Emmerich for a compatibility check and procurement of the V-414 set; our consultants will advise on integration and delivery from stock. Technical data SKU: V-414 GTIN: 4061905085918 Manufacturer: Vertex Facts Weight: 1.3 kg Pieces per set: 12 Taper: ER-20 eClass: 21022190 Special features Collet chuck included with Morse taper mounting Delivered as a complete collet set Suitable for standard ER-20 tool shanks FAQ What is included in the V-414 collet set? The V-414 collet set includes a collet chuck prepared for a Morse taper mounting and a complete 12-piece assortment of collets supplied as a ready-to-fit set. Which taper does the collet chuck use? The chuck is configured for a Morse taper mounting and employs an ER-20 collet interface for tool clamping. Can the set be used in production machines? Yes, the V-414 kit is intended for workshop and light-production use where standard ER-20 tooling and a Morse taper spindle are present. How does the ER-20 interface benefit machining accuracy? ER-20 collets provide consistent radial clamping and repeatability, which supports improved concentricity and reduced rework in serial machining. Are replacement collets or spare parts available? Replacement collets compatible with the ER-20 system are available; for matching spares and part numbers, refer to the V-414 specifications when ordering. Is the V-414 suitable for my existing tooling? If tooling uses standard ER-20 shanks and the machine accepts a Morse taper mounting, the V-414 set is designed to integrate without additional adapters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-20 Collet Set With Collet Chuck And Morse Taper Mount, 10 Pc Set - Vertex
Take advantage of precise clamping and secure spindle mounting with the ER-20 collet system and Morse taper shank; the set reduces setup time and supports consistent machining quality. Order the kit directly via Metav Werkzeuge or consult the Metav team for sizing advice. V-415 Collet set with ER-20 chuck and Morse taper shank (Vertex) The V-415 collet set provides precise, concentric workpiece clamping via an ER-20 collet chuck with a Morse taper shank for general workshop and industrial milling applications ER-20 system for high concentricity Morse taper shank for secure mounting Set of 10 precision collets Robust construction for daily workshop use Improve part accuracy through stable clamping The ER-20 collet system is designed to deliver repeatable precision by centring the workpiece directly within the toolholder. Compared with loose or tapered toolholders, collets apply uniform radial pressure that minimises lateral movement and reduces final-part runout, which lowers the need for rework and enhances process reliability. For production runs where consistency is paramount, this method of clamping helps maintain tighter tolerances and steadier surface finishes. Faster changeovers and secure spindle engagement A Morse taper shank provides a proven interface for secure spindle engagement and simple removal without complex tooling. Combined with a dedicated collet chuck, the arrangement delivers stable transmission of torque and reduces vibration under load, which supports longer tool life and improved surface quality. The system is suited to machines that require quick tool changes while retaining the mechanical integrity necessary for precise machining tasks. Built for everyday workshop resilience Supplied as a set of 10 precision collets, the kit addresses a broad range of common diameters and simplifies inventory management at the bench. The components are engineered for repetitive use in a busy environment and balance durability with practical weight for handling—total mass approximately 1.2 kg. Manufactured by Vertex, the combination of rugged construction and standardised interfaces means reliable performance across manual and CNC setups, contributing to fewer interruptions and steadier production throughput. Choose the Vertex ER-20 collet solution via Metav Werkzeuge for dependable clamping performance and straightforward spindle mounting — contact Metav Werkzeuge for detailed advice and to confirm compatibility with existing toolholders Technical data Article number: V-415 GTIN: 4061905086021 Manufacturer: Vertex Core measurements Pieces per set: 10 Weight: 1.2 kg Special features Collet series: ER-20 Shank type: Morse taper (MK) Contents: collet chuck and 10 collets Manufacturer brand: Vertex FAQ What sizes are included in the set? The set is supplied as a collection of ten precision collets; specific diameters can be confirmed with Metav Werkzeuge or in the product specification sheet for the V-415 collet set Is the collet chuck compatible with standard spindles? Yes, the ER-20 collet chuck is compatible with machines that accept a Morse taper shank and standard ER-20 interfaces as specified by Vertex How does this kit affect machining accuracy? Using the ER-20 system with a correctly mounted Morse taper reduces runout and improves concentricity, which directly contributes to more consistent part tolerances Can the set be used in both manual and CNC machines? The design of the chuck and the set of 10 collets is suitable for both manual and CNC applications where an ER-20 interface and a Morse taper mounting are supported What is the total weight of the set? The complete kit has an approximate weight of 1.2 kg Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-20 Collet Set With MT-3 Collet Chuck, 10 Pieces – Vertex
Take advantage of precise ER‑20 clamping, an MT‑3 taper arbor and a complete set of sizes for reliable tool holding and reduced setup time. Order the collet set directly via Metav Werkzeuge or consult our specialists for application advice. Vertex Collet Set V-442 – ER‑20 collets with MT‑3 taper arbor The Collet set V-442 provides secure, concentric clamping in milling and drilling operations and is supplied with an MT‑3 arbor for direct fitment to machines with a Morse taper. High-precision ER‑20 collet clamping MT‑3 Morse taper arbor included Complete set with 10 collets Consistent precision for repeatable machining results The ER‑20 collet system delivers precision and low runout for consistent part quality. Designed to centre the tool shank precisely, the system reduces vibration and improves surface finish, which leads to fewer rejected parts and shorter rework cycles. For shops aiming to increase throughput, the proven clamping geometry of this solution helps maintain tight tolerances across repeated operations while supporting standard tool shank diameters. Fast, flexible setup with MT‑3 compatibility The inclusion of an MT‑3 taper arbor simplifies machine integration and reduces changeover time. The arbor enables direct mounting in spindles or adaptors that accept Morse taper sizes, giving versatility across machines. Supplied as a complete set with 10 collets, the kit minimises the need for multiple single purchases and supports quick tool changes, which is particularly useful for job shops and production lines that require flexible fixturing and efficient workflows. Reliable workshop performance and practicality Manufactured by Vertex and supplied as a ready-to-use kit, this clamping solution supports stable production routines and straightforward maintenance. The set is suitable for standard milling and drilling applications where secure tool retention and repeatability matter. Routine cleaning and correct engagement of the collet in the nut ensure ongoing repeatability and safe operation, contributing to predictable machine performance and lower process variability. Contact Metav Werkzeuge in Emmerich for tailored advice and to source the Vertex V-442 collet set directly from stock Technical data SKU: V-442 GTIN: 4061905096303 Manufacturer: Vertex Core specifications Weight: 1.3 kg Pieces per set: 10 Special features Collet type: ER‑20 Taper: MT‑3 Set: yes FAQ What applications are suitable for this collet set? The Vertex collet set V-442 is suitable for general milling and drilling applications where precise tool clamping and low runout are required. Does the kit include an arbor for machine mounting? Yes. The V-442 set includes an MT‑3 taper arbor for direct fitment to compatible spindles and adaptors. How many collets are included in the set? The set contains 10 collets, providing a range of sizes for flexible tool holding and reduced need for frequent purchases. Is this compatible with ER‑20 tooling systems from other manufacturers? The V-442 follows the ER‑20 standard and is compatible with other ER‑20 tooling and accessories that meet the same specification. Who manufactures this collet set? The kit is manufactured by Vertex and supplied as the Vertex collet set V-442. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-25 Collet Set NT-40 With Collet Chuck, 7-Piece - Vertex
Take advantage of the ER‑25 collet system with an NT‑40 taper and a seven‑piece configuration for stable, repeatable clamping and streamlined tool changes; the robust construction and compact form factor support continuous operation in production environments. Order the collet set directly via Metav Werkzeuge or ask our consultants if needed. V‑225 Collet Set – ER‑25 collets with NT‑40 taper (Vertex) A V‑225 collet set designed for precision clamping in milling and drilling spindles with an NT‑40 taper, ideal for workshop and industrial applications. ER‑25 collets for standardised clamping NT‑40 taper compatible with many spindles Seven‑piece set covering common tool diameters Solid construction, total weight 3.3 kg Precision and process reliability for repeatable results The ER‑25 system delivers precision clamping that reduces positional variation between operations. By combining an industry‑standard collet form with the NT‑40 taper mount, the kit supports consistent concentricity and repeatability across successive tool changes, which is essential for batch production and finishing tasks. The standardised clamping geometry minimises spindle wobble and assists in maintaining component tolerances, helping to keep rejects and rework to a minimum. This stability translates directly into measurable efficiency gains on the shop floor. Compatibility that fits into existing workflows Supplied as a seven‑piece set, the kit covers the most frequently used holder sizes for general machining, enabling rapid swapping of tools without the need for additional adapters. The NT‑40 interface ensures compatibility with a wide range of milling and drilling spindles that use this taper standard, making integration straightforward in mixed‑brand machine environments. The set format reduces inventory complexity while offering the flexibility required for toolroom work and small‑batch production alike. Robust handling and straightforward maintenance Constructed for everyday workshop use, the collet kit’s balanced design and solid build support reliable clamping over prolonged cycles; the complete set has a combined weight of 3.3 kg, providing a stable feel during handling and storage. Basic maintenance—regular cleaning of the collet bore and correct assembly of the chuck—preserves clamping performance and extends service life. Clear labelling of the set components and the compact organiser layout simplify tool selection and minimise downtime during changeovers. Designed for tradespeople and production environments Manufactured under the Vertex programme, the kit addresses the needs of workshops, contract manufacturers and educational facilities that require dependable clamping solutions without excessive complexity. The arrangement of collet sizes in a single kit supports faster job preparation and a tidier tool bay, which contributes to safer, more efficient working conditions. The set’s focus on compatibility and stability makes it suitable where consistent results and predictable process behaviour are priorities. For a reliable ER‑25/NT‑40 solution choose the Vertex V‑225 collet set — contact Metav Werkzeuge in Emmerich for bespoke advice and prompt shipment: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical data SKU: V‑225 GTIN: 4061905095528 Manufacturer: Vertex Facts Weight: 3.3 kg Pieces per set: 7 Collet type: ER‑25 Taper: NT‑40 Special features Set configuration: collet chuck with NT‑40 taper Collets included: seven ER‑25 sizes Application: precision clamping in machining operations FAQ What taper does the set use and which machines is it compatible with? The set uses an NT‑40 taper and is compatible with spindles and holders designed to accept NT‑40 taper interfaces; the ER‑25 collet form is standard for many milling and drilling applications. Which collet sizes are included in the kit? The V‑225 collet set comprises a seven‑piece selection of ER‑25 collets, chosen to cover common tool diameters used in general workshop machining. Is the kit suitable for production use? Yes, the Vertex V‑225 collet set is built for daily workshop and light industrial use, offering reliable clamping and straightforward handling for repeated operations. How should the collets be maintained to preserve accuracy? Regular cleaning of the collet bore and chuck interface, together with correct assembly and secure clamping, will maintain the clamping performance of the collet kit and support long‑term repeatability. Can the collet set reduce setup times in a mixed‑brand environment? By standardising on ER‑25 collets and the NT‑40 taper, the set simplifies tool changes and reduces the need for multiple adapter types, helping to speed up setups in mixed equipment environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-25 Collet Set With Collet Chuck, 15 Pieces — Vertex
Take advantage of the ER-25 clamping standard, the complete 15-piece configuration and the integrated Morse taper mounting to secure reliable, repeatable toolholding across production runs — order the set directly via Metav Werkzeuge or consult our advisors for application guidance. Collets V-416 – ER-25 collet set with Morse taper collet chuck by Vertex Collets V-416 provide a compact, standardised toolholding solution for machining tasks, supplied as a complete set with an ER-25 collet chuck and Morse taper shank for straightforward integration into workshop spindles. ER-25 system for precision toolholding Complete 15-piece collet set Includes collet chuck with Morse taper shank Robust construction, approx. 2.4 kg set weight Consistent clamping for repeatable machining results The ER-25 configuration is established across industry for offering a good balance between diameter range and clamping stability. A set built around this standard reduces changeover time and supports consistent concentricity during milling, drilling and light turning operations. The modular nature of the system means the collets adapt to a range of tool shank diameters, providing secure clamping while limiting vibration and unintended tool movement. This supports predictable outcomes and fewer rejects in batch production. Ready-to-fit set that simplifies workshop logistics Delivered as a 15-piece set with the collet chuck mounted on a Morse taper shank, the assembly is prepared for direct insertion into compatible spindle tapers. The packaged configuration streamlines procurement and inventory: a single SKU covers a range of common diameters, reducing the need for multiple separate purchases. The total set weight of approx. 2.4 kg keeps handling straightforward, while the inclusion of the chuck and collets in one kit lowers administrative overhead and simplifies toolroom organisation. Durable design that supports throughput and uptime Built for routine workshop use, the set combines secure clamping with straightforward handling to shorten setup times and sustain machining throughput. The integrated chuck with Morse taper mounting facilitates rapid engagement with standard taper sockets, while the ER system ensures repeatable seating of tools. Sourcing from Vertex and supplied via Metav Werkzeuge links product reliability with a tested European distribution channel, supporting steady availability and a consistent quality filter for the workshop environment. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex V-416 ER-25 collet set and local supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: V-416 GTIN: 4061905086090 Manufacturer: Vertex Facts Set weight: 2.4 kg Pieces per set: 15 Cone: ER-25 Special features ER-25 collet system Set includes collet chuck with Morse taper shank Supplied as a complete 15-piece set Manufacturer: Vertex FAQ What does the set include? The set contains 15 collets and a matching collet chuck supplied with a Morse taper shank, supplied as SKU V-416. Which collet system is used? The product is based on the ER-25 collet system for standardised clamping across common tool shank diameters. Is the chuck fitted for direct spindle mounting? Yes, the chuck is supplied with a Morse taper shank for direct insertion into compatible taper sockets. Who manufactures the set? The set is produced by Vertex and distributed under SKU V-416. What is the total weight of the set? The complete set weighs approximately 2.4 kg. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-25 Collet Set With Collet Chuck, 7 Pieces — Vertex
The combination of ER-25 compatibility, a Morse taper collet chuck and precision-manufactured collets ensures stable tool clamping and consistent concentricity for demanding workshop tasks. Benefit from robust repeatability, straightforward interchangeability and centralised ordering via Metav Werkzeuge or consult the team for application advice. Collet set V-418 — ER-25 collet chuck with Morse taper arbor (Vertex) The collet set offers precision clamping in turning and milling applications with an ER-25 chuck mounted on a Morse taper arbor. ER-25 system for wide tool compatibility Precision-ground collets for concentricity Integrated Morse taper arbor for secure seating Robust construction for workshop durability Fewer set-ups, higher throughput thanks to consistent clamping A precisely matched ER-25 clamping system delivers reproducible runout values that reduce scrap and rework. The precision-ground collets maintain concentricity across repeated tool changes, which shortens set-up time and supports higher machine utilisation. For production-focused shops, this means fewer interruptions for re‑alignment and a measurable improvement in machining consistency. Versatile integration across machine spindles and arbors The included Morse taper arbor provides secure transfer of axial and radial loads between spindle and chuck, enabling use on machines equipped for taper-mounted tooling. Compatibility with standard ER-25 tooling ensures that existing tool inventories remain usable, while the solid chuck interface keeps axial play to a minimum. The result is reliable power transmission and predictable cutting performance in both milling and light turning tasks. Durable workmanship for everyday industrial use Constructed for repetitive industrial handling, the set combines structural rigidity with corrosion-resistant finishing to sustain tight tolerances over time. This durability reduces the need for frequent replacements and supports a consistent quality level on the shop floor. Where traceability and service life matter, the set’s build quality contributes to long-term operational economy. Practical benefits and ease of maintenance The design simplifies cleaning and inspection: collets are accessible for routine checks and the chuck can be unclamped for service without special tools. Clear system designation (ER-25) and the Morse taper interface make reordering and replacement straightforward, supporting predictable maintenance cycles. For workshops aiming to streamline tooling logistics, these attributes reduce downtime and simplify inventory control. Contact Metav Werkzeuge for tailored application advice on Vertex collet sets and assistance selecting the right ER-25 and Morse taper configuration for specific machining tasks Technical data SKU: V-418 GTIN: 4061905086304 Weight: 1.3 kg Facts Taper system: ER-25 Pieces per set: 7 Set: yes Special features Collet chuck with Morse taper (MT) arbor included Precision-ground collets for improved concentricity Suitable for standard ER-25 tooling systems FAQ What machines is this collet set compatible with? The collet set V-418 (Vertex) is designed for use where an ER-25 clamping system and a Morse taper arbor are supported; it is suitable for milling spindles and machine centres that accept MT-mounted tooling. How does the Morse taper arbor affect performance? A Morse taper arbor increases axial stability and secure seating between spindle and chuck; in the V-418 set this results in improved power transfer and reduced axial play during machining. Can the collets be replaced individually? Yes, the precision-ground collets in the set are replaceable and interchangeable within the ER-25 system to maintain concentricity and extend overall service life. Is the set suitable for high-speed machining? The ER-25 system in the V-418 provides good concentricity for moderate to high spindle speeds typical in workshop milling and light turning operations; verify machine and tooling speed limits for specific applications. Where to obtain spare parts or additional collets? Spare collets and compatible ER-25 accessories can be sourced through Metav Werkzeuge; mention the Vertex V-418 SKU to ensure correct matching. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-25 Collet Set With MT-3 Taper And Collet Chuck, 7-Piece Kit - Vertex
Precise ER‑25 clamping combined with an MT‑3 Morse taper delivers repeatable tool retention and straightforward spindle fitting; the compact seven‑piece set suits varied workshop tasks. Order the set directly via Metav Werkzeuge or consult our specialists for application-specific advice. V-444 Collet Set (ER-25) with MT‑3 Collet Chuck by Vertex The V-444 is a compact collet set designed to provide precision clamping for milling and drilling spindles with an MT‑3 taper. ER‑25 system for high concentricity MT‑3 Morse taper for direct spindle fit Seven-piece set for versatile clamping Robust build suitable for workshop use Consistent clamping for repeatable results A reliable production process starts with stable toolholding. The ER‑25 system used here ensures high concentricity, translating into reduced runout and more consistent part geometry. By combining a standard ER collet format with a properly matched chuck, the arrangement reduces vibration transfer to the cutting edge and supports repeatable tolerances across batches. For operations where consistency matters, this solution reduces rework and improves first‑pass yield. Direct spindle mounting speeds tool changes Fitted with an MT‑3 Morse taper, the collet chuck mounts directly into compatible spindles without additional adapters, simplifying tool changes and minimising setup time. The Morse taper interface offers secure axial and radial support under typical workshop loads, while the ER‑25 system allows a range of tool shank diameters to be clamped with a single chuck body. This combination supports quick transitions between jobs and keeps machine downtime to a minimum. Practical design for everyday workshop demands Built for routine use, the set’s construction focuses on durability and ease of integration into existing workflows. The compact nature of the chuck and the standardised ER‑25 format mean spares and replacements are widely available, which helps maintain uptime. The overall solution is well suited to small series production and general workshop work, where reliable clamping and straightforward maintenance are valued. Clear advantages for procurement and maintenance Specifying standard interfaces such as ER‑25 and MT‑3 simplifies procurement and inventory management: one chuck body can accept multiple collets, and the seven‑piece configuration provides basic coverage for common tool diameters. Maintenance routines are straightforward because the system uses established components; technicians experienced with collet systems will find familiar handling and compatibility, reducing training time and possible handling errors. For procurement advice or to confirm compatibility with specific machines, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Vertex V‑444 collet set and its suitability for the intended spindle application Technical data Article number: V-444 GTIN: 4061905094378 Manufacturer: Vertex Core specifications Weight: 2.1 kg Taper: MT-3 Collet type: ER-25 Pieces per set: 7 Features ER‑25 collet system Collet chuck with MT‑3 shank Set configuration: seven‑piece collet set FAQ What spindle taper is required for this collet set? The V‑444 set uses an MT‑3 Morse taper shank, so it requires a spindle or arbor accepting MT‑3 for direct mounting. How many collets are included in the set? This Vertex collet set is supplied as a seven‑piece configuration, providing a basic range of ER‑25 clamping options for typical workshop needs. Is the ER‑25 system compatible with other ER‑type accessories? Yes, the ER‑25 format is a standard collet system; the V‑444 chuck accepts ER‑25 collets and is compatible with other ER‑25 accessories from standard suppliers. Will this set improve machining accuracy? Using the ER‑25 system together with the MT‑3 chuck reduces runout and improves toolholding stability, which contributes to better repeatability and part accuracy in everyday machining tasks. Can the set be used for both milling and drilling operations? The combination of ER‑25 collets and an MT‑3 mounting provides versatile clamping suitable for common milling and drilling applications when matched to appropriate machines and tooling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-25 Collet Set With MT-3 Taper Collet Chuck, 15 Pieces - Vertex
Take advantage of a compact 15-piece ER-25 collet set with an integrated MT-3 arbor for reliable tool holding, precise concentricity and reduced setup time; order the set via Metav Werkzeuge or consult the sales team for application advice. V-443 Collet Set (ER-25) with MT-3 Arbor by Vertex — 15-piece, 2.5 kg A V-443 collet set designed to deliver precise clamping for milling and drilling spindles featuring an ER-25 clamping system and an MT-3 taper for direct spindle integration. Complete 15-piece ER-25 set Includes MT-3 taper arbor High repeatability for consistent concentricity Compact and robust 2.5 kg package Secure clamping that increases process reliability The set provides repeatable tool holding through the ER series design, ensuring consistent runout and stable cutting conditions. The clamping system reduces vibration and tool movement, which in turn improves surface finish and extends tool life. This benefit-oriented design supports continuous production runs by limiting the need for frequent rework and readjustment. The construction focuses on functional reliability rather than cosmetic features, making it suitable for industrial environments where stability is essential. Seamless integration with MT-3 spindles for workshop flexibility Thanks to the included MT-3 arbor, the chuck integrates directly with machines using a Morse taper spindle, simplifying machine setup and reducing adaptor requirements. Compatibility with common taper standards means reduced downtime when switching between fixtures and faster changeovers. The modular arrangement supports both retrofit and new-equipment use, allowing workshops to standardise on a single clamping family and streamline tooling logistics for higher throughput. Ready-to-use set that speeds up machining workflows The 15-piece configuration supplies a practical range of collets in one compact kit, enabling quicker access to the most frequently required sizes and minimising tool change interruptions. The organised set reduces search time and supports efficient scheduling of operations, which is particularly valuable in jobbing shops and production cells where every minute counts. The relatively low mass of the complete kit at 2.5 kg aids storage and transport between workstations without sacrificing robustness. Built for longevity with straightforward upkeep Components are designed for workshop conditions, emphasising durability and easy maintenance to keep the system in service longer. Regular cleaning and inspection of the clamping surfaces and taper seating maintain consistent performance; worn parts can be replaced without extensive downtime. The overall design reduces the total cost of ownership through prolonged service intervals and predictable behaviour in demanding applications. For procurement, specify the Vertex V-443 collet set with ER-25 clamping and MT-3 arbor when ordering from Metav Werkzeuge, or contact Metav Werkzeuge for tailored advice and delivery from their Emmerich quality hub. Technical Data SKU: V-443 GTIN: 4061905094361 Manufacturer: Vertex Facts Weight: 2.5 kg Pieces per set: 15 ECLASS: 21022190 Special features ER-25 collet type Includes collet chuck with MT-3 taper arbor Set configuration for workshop use Compact, transportable kit FAQ What sizes are included in the set? The set contains 15 ER-25 collets supplied as a complete kit; the Vertex V-443 collet set covers the standard range of sizes for common tooling needs. Can the collet chuck be fitted directly to a lathe or milling machine spindle? Yes, the included MT-3 arbor allows direct mounting to spindles accepting a Morse taper, enabling straightforward integration of the Vertex V-443 into compatible machines. How does this set improve machining accuracy? Using ER-25 collets provides consistent radial clamping and reduced runout, which improves concentricity and cutting stability during operations. Is the kit suitable for production environments? The compact 15-piece kit is designed for workshop use and supports efficient tool changes, making it suitable for both jobbing and light production settings. What maintenance is recommended for long service life? Regular cleaning of clamping surfaces and inspection of the taper seating is advised to maintain performance; components in the Vertex V-443 set are designed for simple upkeep. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-25 Collet Set With NT-30 Taper, 15 Pcs Collets, SK Mount - Vertex
Benefit from stable, repeatable clamping delivered by ER-25 technology and an NT-30 taper interface; the set brings workshop-ready versatility and reliable tool holding. Order the collet set directly via Metav Werkzeuge or consult our specialists for application guidance. Collet set V-224 — ER-25 collets, NT-30 taper (Vertex) The Collet set V-224 is a precision clamping solution for machine spindles with an NT-30 taper, supplied as a workshop-ready collet chuck set. ER-25 collets for high-precision clamping NT-30 taper compatible spindle interface Complete set for immediate workshop use Consistent part quality through stable clamping Stable clamping reduces run-out and improves surface finish; the ER-25 system in this set is designed to provide consistent axial and radial grip, which leads to tighter tolerances and fewer rejects. Where concentricity matters, the precision geometry of the collets minimises vibration and wear on the toolholder, so cycle times remain predictable and part quality is maintained across batches. Compatibility that speeds up machining tasks A standardised taper connection simplifies integration into existing setups. The NT-30 interface ensures broad compatibility with suitable spindles and toolholders, while the included collet chuck allows quick tool changeovers and reduced downtime. This combination supports more efficient production workflows by shortening set-up times and enabling faster transitions between operations without compromising clamping force. Robust design for everyday workshop demands Constructed to withstand regular use, the assembly offers durability and balanced rotational behaviour for stable running at moderate speeds. The set is intended for general machining environments where reliable tool retention and straightforward handling are priorities. Clear, repeatable clamping performance reduces rework and supports consistent process control on the shop floor. For dependable clamping with Vertex quality, contact Metav Werkzeuge in Emmerich for tailored advice and to order the V-224 collet set by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: V-224 GTIN: 4061905095511 Manufacturer: Vertex Facts Weight: 2.4 kg Pieces per set: 15 ECLASS: 21022190 Special features Collet type: ER-25 Taper: NT-30 Set: Includes collet chuck and collets FAQ Which taper does the set fit? The set is supplied for an NT-30 taper interface suitable for matching machine spindles. What collet standard is included? ER-25 collets are included in the V-224 collet set for standard precision clamping. How many items are contained in the set? The V-224 is supplied as a set with 15 pieces. What is the weight of the complete set? The complete collet set V-224 has a weight of 2.4 kg. For which workshop tasks is this set intended? The V-224 by Vertex is intended for general precision clamping in machining tasks where repeatable tool holding and easy changeovers are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-32 Collet Chuck 32mm Capacity R8 Shank Precision Toolholding - Vertex
Combine reliable ER-32 clamping with an R8 spindle fit and a lightweight, compact build to ensure stable, repeatable toolholding. Order the V-302 directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. V-302 ER-32 collet chuck with R8 shank (Vertex) The V-302 is a compact collet chuck designed for precise toolholding on machines with an R8 tapered spindle, ideal for industrial and workshop milling setups ER-32 compatible clamping system R8 shank for direct spindle fitting Lightweight: 0.8 kg for reduced spindle load Compact design for tight workspaces Enhanced machining consistency through precise clamping A reliable clamping interface reduces runout and improves repeatability; the ER-32 collet interface used here secures round shanks with uniform radial pressure, supporting consistent cuts and tool life. The chuck’s design focuses on stable axial and radial support to maintain precision during milling and drilling operations. For shops that prioritise dimensional accuracy, this component delivers predictable workholding and helps to reduce rework. Seamless fit with R8 spindles for quick integration The R8 taper shank ensures direct and rigid mounting in compatible machine spindles, allowing for straightforward replacement of standard holders without additional adapters. This direct-fit arrangement reduces assembly complexity and preserves spindle alignment, contributing to efficient setup times and stable performance. The combination of a standard taper and an ER-32 clamping system makes the unit adaptable to common tooling standards in small and mid-sized machine tools. Compact, lightweight design to support production uptime Weighing 0.8 kg, the chuck imposes minimal additional mass on the spindle while retaining secure clamping forces; the low weight helps to limit inertial load and can contribute to smoother acceleration and deceleration cycles. Sourcing through a reliable distributor reduces supply-chain risk: Metav stands for democratisation of precision, offering a broad product range and established logistics from Emmerich. Over 48,000 customers trust this supply chain approach, which pairs inventory depth with technical competence. Practical applications and workshop compatibility The device excels as a workholding solution in small-part milling and finishing tasks where space and repeatability matter. When paired with the correct ER-32 collets, it provides stable clamping for short-shank cutters and drill tooling used on R8-equipped machines. The compact footprint supports workflows in crowded setups and toolrooms where maintaining spindle clearance is essential. For those specifying equipment for busy workshops, the combination of a standard taper and ER-style collet compatibility simplifies tooling planning and stocking. Contact Metav Werkzeuge in Emmerich for application advice and quote requests for SKU V-302; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: V-302 Brand: Vertex GTIN: 4061905090110 Facts Weight: 0.8 kg eClass: 21020405 Special features R8 shank ER-32 collet compatibility Compact, lightweight design FAQ Is the chuck compatible with R8 spindles? Yes. The V-302 features an R8 shank designed for direct mounting in R8 tapered spindles. Which collet system does this chuck use? The chuck is designed for the ER-32 collet system, which accepts standard ER-32 collets. What is the weight of the chuck? The unit weighs 0.8 kg, providing a lightweight option that minimises additional spindle mass. What applications suit this chuck best? The chuck is suited to milling and drilling tasks on R8-equipped machines where compact, repeatable workholding is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-32 Collet Chuck Set R8 Shank 18pcs, With R8 Mount - Vertex
Benefit from a high-precision ER-32 clamping system combined with a secure R8 shank and a complete 18-piece set for reliable toolholding and reduced setup time. Order the collet chuck directly via Metav Werkzeuge or contact our consultants for tailored fitment advice. V-313 Collet Chuck (R8 shank) – ER-32 set by Vertex V-313 is a collet chuck designed for secure toolholding on machines with an R8 spindle taper, optimising repeatability and setup efficiency. ER-32 precision clamping system R8 taper for standard milling spindles Complete 18-piece collet set Robust build at 5.3 kg for stability Consistent clamping for repeatable results The ER-32 clamping system provides uniform gripping force across the tool shank, improving repeatability and surface finish in serial or precision machining. The design reduces micro-movement under load, which translates into fewer rejected parts and less rework. For production environments and jobbing shops alike, the reliable clamping behaviour shortens inspection cycles and supports predictable process windows. Smooth integration with R8 machine spindles Fitting an R8 taper allows straightforward insertion into compatible milling spindles, enabling fast tool changes and secure axial alignment. The chuck’s mass contributes to spindle stability during cutting, helping to dampen vibration and maintain concentricity. This results in more consistent tool life and predictable machining performance, supporting throughput and operational efficiency without complex retrofit work. Workshop-ready set that reduces downtime Supplied as a set, the package includes a complete ensemble of ER-32 collets to cover a broad range of shank diameters, enabling immediate use after installation. Having a matched set to hand reduces changeover time and minimises the need for frequent regripping. The sturdy construction and balanced design promote long-term durability, making this clamping solution a practical choice for workshops that prioritise uptime and consistent results. Contact Metav Werkzeuge to discuss the Vertex V-313 collet chuck and confirm compatibility with existing equipment, or request further technical details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: V-313 GTIN: 4061905093043 Manufacturer: Vertex Shank: R8 Collet type: ER-32 Set: yes Facts Weight: 5.3 kg Pieces per set: 18 eClass: 21020405 SKU: V-313 Special features ER-32 collet system R8 spindle taper Complete 18-piece collet set Designed for precision toolholding FAQ What spindle taper is required for installation? The chuck requires an R8 spindle taper and is intended for machines that accept R8-mounted accessories; check spindle compatibility before fitting. How many collets are supplied with the set? The set contains 18 pieces, delivered as a matched ER-32 collet ensemble for a wide range of shank diameters. Which collet type is used and what does it mean? The unit uses ER-32 collets, a standard clamping system that provides versatile, concentric gripping across many common tool shank sizes. What is the unit weight and why does it matter? The assembly weighs 5.3 kg, a factor that contributes to rotational stability and vibration damping during machining. Is this product suitable for high-precision workshop use? Yes, the chuck’s precision clamping and balanced construction support stable toolholding and consistent part quality in precision workshop applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-32 Collet Chuck Set With Collets, SK Taper Adapter - Vertex
Benefit from the combination of robust ER-32 clamping, secure SK taper compatibility and a comprehensive set configuration to keep production flowing with reliable repeatability. Order the collet set directly via Metav Werkzeuge or consult the advisors for specification matching and integration support. Collet set V-208 — ER-32 collets with SK taper by Vertex A collet set V-208 engineered for secure tool clamping on SK taper spindles, intended for workshop and production environments where consistent concentricity and fast tool changes are required ER-32 collets for precise concentricity SK taper compatibility for secure spindle fit Precision-ground for repeatable clamping Lightweight, compact configuration for storage Consistent clamping that reduces rework and scrap High-precision clamping is fundamental to machining accuracy. The ER-32 collets in this configuration provide tight concentricity, which reduces radial runout and improves surface finish on turned or milled components. By converting small positional errors into predictable tolerances, the clamping system supports shorter rework cycles and fewer rejected parts. The design emphasises precision and stability so that process capability can be maintained across batches and shifts. Faster changeovers and secure machine integration Compatibility with an SK taper shank ensures a robust mechanical interface between spindle and chuck, reducing micro-movements under load. This results in a secure fit and lower vibration during high-speed operations. The configuration is optimised for efficient tool changes and minimal set-up time, supporting a smoother workflow on production machines. As a result, cycle times benefit from reduced downtime and the operational floor gains in-day flexibility for mixed runs and short series. Practical set composition for versatile workshop use Delivered as a ready-to-use set, the collection covers the common clamping range encountered in general machining and maintenance tasks, simplifying tooling logistics and storage. The compact package, with a total transport weight of 3.8 kg, is easy to handle and stow in workshop cupboards or tool trolleys. The precision-ground components are designed for longevity under normal workshop conditions, so the investment contributes to steady productivity rather than frequent replacements. Contact Metav Werkzeuge for tailored advice on integrating the Vertex V-208 collet set into existing machines and to discuss supply options from our Emmerich location. Technical Data Article number: V-208 GTIN: 4061905087318 ECLASS: 21022190 Facts Weight: 3.8 kg Pieces per set: 111 Taper: ER-32 Special features SK taper shank compatibility Set configuration with collet chuck Manufacturer: Vertex FAQ What clamping range does the set cover? The set contains a comprehensive range of ER-32 collets intended to cover the most common tool diameters encountered in general workshop and production machining tasks; the V-208 configuration provides flexibility for varied tooling. Is the set compatible with standard SK taper spindles? Yes, the configuration is designed for SK taper interfaces so the collet chuck fits securely onto compatible machine spindles and maintains concentricity under load. How does ER-32 affect machining accuracy? ER-32 collets are precision-ground to ensure concentric gripping; this characteristic of the clamping system reduces radial runout and supports improved surface finishes and dimensional repeatability. What maintenance is required for the collets and chuck? Routine cleaning and occasional inspection for wear are recommended. The components in the V-208 set should be kept free from chips and coolant residues to preserve clamping performance. Who manufactures the set and where can technical specifications be confirmed? The set is manufactured by Vertex; for detailed dimensional drawings and integration guidance consult the product documentation or contact Metav Werkzeuge for technical support. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-32 Collet Chuck Set With ER-32 Collets 18 Pc, SK Taper - Vertex
Take advantage of a complete clamping solution that combines ER‑32 compatibility, an SK taper shank and the convenience of an 18‑piece kit for reliable, repeatable machining. Order the set directly via Metav Werkzeuge or consult our experts for application-specific advice. V-207 Collet Set with ER‑32 Collet Chuck (SK taper) — Vertex A V-207 collet set supplying an ER‑32 clamping system with SK taper shank, engineered for precision toolholding across general machining applications Complete 18-piece collet set ER‑32 clamping compatibility SK taper shank for spindle mounting Robust kit, balanced for precision Consistent clamping that reduces setup time and scrap The ER‑32 system offers a standardised clamping interface that delivers repeatable concentricity and secure tool retention. Supplied as a complete set, the collets allow quick changes between tool diameters, reducing setup and idle time on the shop floor. The result is improved throughput and fewer scrap parts because the clamping accuracy is maintained across consecutive operations. For production environments where cycle reliability matters, this approach translates directly into measurable efficiency gains. Integration with machine spindles and practical handling Designed with an SK taper shank, the set integrates with common spindle tapers found on many CNC machines, facilitating straightforward mounting and removal. The balanced kit construction helps to minimise vibration during cutting, which supports better surface finish and longer tool life. The set configuration covers the most frequently used diameters, enabling smooth changeovers without the need to source individual components. The overall kit weight of 4.8 kg reflects a durable, workshop-ready assembly suitable for frequent handling and secure storage. Durability, manufacturing quality and workshop confidence Manufactured by Vertex, the components are engineered for long service life under regular workshop conditions. Robust materials and precise machining of the collet surfaces ensure consistent grip over repeated cycles, while the standard ER‑32 geometry keeps the system compatible with a wide range of toolholders. For purchasing managers and workshop leads seeking dependable toolholding, the set represents a pragmatic balance of performance and maintainability that supports steady production rhythms. Contact Metav Werkzeuge in Emmerich for tailored advice on the V-207 collet set and to confirm delivery options from the European stock holding. Technical data Article number: V-207 GTIN: 4061905086328 Manufacturer: Vertex Facts Weight: 4.8 kg Pieces per set: 18 Cone: ER‑32 Special features SK taper shank for spindle mounting Complete collet set configuration Set format suitable for general machining and toolholding FAQ What is included in the set? The V-207 collet set includes 18 collets configured for ER‑32 clamping and an SK taper interface for spindle mounting, supplied as a ready-to-use kit by Vertex. Which machines are compatible with this set? Machines equipped to accept an SK taper shank and ER‑32 tooling can integrate the V-207 set, making it suitable for many CNC and conventional milling spindles. How does the ER‑32 system improve machining results? ER‑32 geometry offers secure axial and radial clamping, reducing runout and vibration; the V-207 set thus supports improved surface finish and extended tool life. Is the set suitable for production use? Yes. The V-207 set is manufactured for frequent workshop use, with balanced components and durable construction intended for repetitive tool changes in production environments. Who manufactures the components and where can I get more information? The components are produced by Vertex; further technical information and purchasing advice can be obtained through Metav Werkzeuge. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-32 Collet Chuck Set With R8 Shank, 11-Piece - Vertex
Benefit from precise ER-32 clamping and reliable R8 compatibility for steady production and reduced setup time. Take advantage of the sturdy 3.2 kg construction and the convenience of an 11-piece set to streamline workshop processes. Order the V-314 directly via Metav Werkzeuge or consult our specialists for tailored advice. Collet chuck (ER-32) with R8 shank — V-314 by Vertex Collet chuck (ER-32) for R8 spindles, designed for precise clamping in milling and drilling applications ER-32 collet system for versatile clamping R8 shank for standard milling spindles Supplied as an 11-piece set Stable 3.2 kg construction for reduced vibration Consistent clamping for precision manufacture The ER-32 system provides a proven solution for concentric clamping in light-to-medium machining tasks. By using a collet-based interface the toolholding achieves uniform contact around the tool shank, which improves concentricity and reduces runout compared with single-point holders. This results in steadier cutting conditions and predictable part quality, supporting repeatable cycles on series work. Easy integration with R8-equipped machines A dedicated R8 shank ensures direct compatibility with machines that accept this taper, simplifying changeovers and keeping downtime to a minimum. The relatively hefty 3.2 kg mass contributes to overall stability during cutting operations, damping minor vibrations and helping maintain surface finish. Where spindle-fit accuracy is essential, the R8 mounting provides a widely used, secure interface for conventional milling spindles. Supply format tuned to workshop needs Delivered as an 11-piece set, the assembly reduces the need for multiple individual purchases and supports efficient tooling management. The set format suits maintenance regimes in small to midsize workshops, allowing stored collets and the chuck to be kept together for fast reconfiguration. The included SKU V-314 simplifies ordering and inventory tracking within procurement systems. Robust design for everyday industrial use Manufactured by Vertex, the unit is engineered for routine shopfloor conditions and frequent handling. The compact footprint combined with solid construction balances access to workpieces with the mechanical rigidity required for machining tasks. Where process reliability matters, this toolholder contributes to lower scrap rates and fewer reworks through dependable clamping performance. For reliable ER-32 clamping and R8 compatibility, request detailed information or place an order with Metav Werkzeuge — contact our Emmerich team via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: V-314 GTIN: 4061905092183 Manufacturer: Vertex Facts Weight: 3.2 kg Pieces per set: 11 Collet type: ER-32 Special features Shank: R8 Supplied as a set Designed for precision clamping FAQ What machines is this collet chuck compatible with? The collet chuck is designed for machines with an R8 shank interface; the R8 taper is common on many conventional milling spindles and drill heads. Does the V-314 come as a complete set? Yes, the V-314 is supplied as an 11-piece set, which bundles the chuck with the corresponding components for workshop convenience. How does the ER-32 system affect machining quality? The ER-32 collet system improves concentricity and grip uniformity, contributing to steadier cuts and consistent surface finish across repeated cycles. Is the chuck suitable for heavy-duty industrial machining? The unit is intended for light-to-medium machining where the 3.2 kg construction offers enhanced stability; for very heavy-duty applications, higher-capacity toolholders may be required. How should the V-314 be identified for reorder? Use the SKU V-314 or GTIN 4061905092183 when reordering to ensure the correct Vertex collet chuck is supplied. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-32 Collet Chuck With R8 Shank, Set of 6 Collets - Vertex
Take advantage of the combination of high clamping accuracy, proven R8 spindle compatibility and robust construction to keep setups reliable and cycle times low. Order the Vertex V-315 collet chuck directly via Metav Werkzeuge or request advice from our consultants for application matching. Collet chuck V-315 by Vertex — ER-32 clamping with R8 taper A compact collet chuck designed for precise workholding in milling applications, optimised for R8 spindle interfaces and ER-32 clamping systems. ER-32 collet system for accurate clamping R8 taper for standard milling spindles Durable construction for repeated use Supplied as a set for immediate use Precise clamping to reduce rework and vibration The V-315 collet chuck combines the familiar ER-32 clamping interface with a compact R8 taper to deliver precision where concentricity matters. The ER-32 standard is widely used because it permits uniform clamping force across a range of tool shank diameters, reducing runout and the risk of premature tool wear. For production and jobbing environments this results in fewer rejected parts and more consistent finishes; the design focuses on reproducible setups and measurable process stability rather than decorative details. Compatibility that speeds machine changeovers Fitting directly to an R8 spindle, the chuck eliminates the need for multiple intermediate adaptors and shortens changeover times. This compatibility reduces inventory of adapters and allows machines to be reconfigured faster between tasks. The compact footprint keeps access to the workpiece clear and the balanced form supports higher spindle speeds where the machine permits. Practical handling is enhanced by the set format which brings together the clamping components needed for immediate installation and routine use. Built for durability and straightforward maintenance Constructed for everyday workshop use, the chuck emphasises durability and straightforward handling: robust interfaces withstand repeated mounting cycles and routine cleaning preserves clamping accuracy. With a mass of 2.9 kg, the assembly is substantial enough to feel stable while remaining convenient to fit and remove. Occasional inspection of the collets and a light application of lubricant to moving parts will maintain performance; replacement collets and accessories can be matched to the original specification to avoid compromise in concentricity or clamping force. Contact Metav Werkzeuge in Emmerich for application advice, component matching or to arrange procurement of the Vertex V-315 collet chuck — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical data Article number: V-315 GTIN: 4061905092114 Manufacturer: Vertex Facts Weight: 2.9 kg Pieces per set: 6 eClass: 21020405 Special features Collet type: ER-32 Shank: R8 Supplied as set FAQ What collet type is used with this chuck? The V-315 collet chuck by Vertex uses the ER-32 collet standard, suitable for a range of tool shank diameters and providing consistent clamping force. Which spindle taper fits this workholding device? This chuck is designed for an R8 taper shank, enabling direct mounting to milling spindles that accept R8 tooling interfaces. Is the product supplied ready for installation? The Vertex V-315 is supplied as a set that includes the clamping components necessary for initial installation and routine operation. How should the chuck be maintained to retain accuracy? Routine cleaning of the collets, inspection for wear and light lubrication of moving parts will help preserve the concentricity and clamping performance of the V-315 collet chuck. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-32 Collet Set 6pcs 150mm Collet Chuck NT-40, SK Mount - Vertex
There is a contradiction in the supplied product data that prevents the generation of a reliable product description. The article text refers to an SK-style shank, whereas the technical specification lists an NT-40 taper; these two designations cannot both be treated as accurate for a single tooling item. Until the correct taper type is confirmed, a consistent and trustworthy product text cannot be produced. Please clarify which taper is intended (SK or NT-40) and confirm any further technical details that should be authoritative. If available, confirm the intended set composition and collet series so that a complete description and benefit-oriented specification can be prepared without risking misleading information. For assistance with this clarification, Metav Werkzeuge is available to help verify the data and to provide the correct technical details by email or phone. Contact details: info@metav-werkzeuge.com, telephone +49 2822 7131930, WhatsApp +49 170 2837271. Once the taper and confirming details are provided, a full product description tailored to workshop and industrial use will be created promptly. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-32 Collet Set With Collet Chuck 11-Piece, SK Shank - Vertex
Take advantage of the combination of precise ER-32 toolholding, a ready-to-use SK-shank collet chuck, and an 11-piece configuration for reliable machining performance; order the set directly via Metav Werkzeuge or contact our consultants for tailored advice. V-202 Collet Set – ER-32 collets with SK shank (Vertex) The V-202 Collet Set is a complete collet and chuck package designed for precise toolholding in milling and drilling operations, combining ER-32 collets with an SK-shank mount for standard machine spindles ER-32 collet compatibility SK shank chuck included 11-piece set for workshop readiness Stable clamping, reduced runout Maintain consistent accuracy with robust clamping A reliable clamping system reduces scrap and rework. The combination of ER-32 collets and a matched chuck provides concentric clamping that helps to minimise runout and vibration during cutting. By converting the clamping task into a stable interface between tool and spindle, this toolholding solution supports repeatable part quality and tighter tolerances. The balanced construction contributes to smoother rotation, which in turn reduces tool wear and supports longer cutter life. Ready-to-fit set for efficient changeovers The V-202 is delivered as an 11-piece set, offering a practical range of collet sizes together with a chuck prepared for SK mounting. This configuration shortens setup times: the chuck accepts standard SK tapers while the assortment of collets covers common tool shank diameters, enabling quick swaps and fewer interruptions in production. At a total mass of approximately 3.2 kg, the set is compact enough for bench storage yet substantial enough to remain durable in daily workshop use. Improve throughput with proven workshop compatibility Engineered for routine industrial use, the set supports efficient workflow by combining compatibility with widely used spindle interfaces and the stability of ER-style collets. The toolholding system is suited for medium- to heavy-duty tasks where secure gripping and minimal deflection are required. In practice, this translates into predictable machining cycles and fewer tool changes driven by poor clamping, resulting in measurable time savings on batch runs and job switching. Suitable for a broad range of machining tasks The included chuck and collets form a versatile toolholding base for a variety of operations in production and toolroom environments. While the set is optimised for conventional milling and drilling applications, its ER-32 standard interface ensures adaptability across many machine types that accept SK tapers. Clear, standardised interfaces simplify integration into existing setups and make replacement or expansion straightforward when process demands change. For reliable, high-precision clamping from Vertex, choose the V-202 Collet Set and contact Metav Werkzeuge in Emmerich for availability and expert guidance Technical Data Article number: V-202 GTIN: 4061905085772 Manufacturer: Vertex Weight: 3.2 kg Shank / Taper: ER-32 Set contents: 11 pieces Facts Total pieces: 11 Weight (approx.): 3.2 kg Classification (eCl@ss): 21022190 GTIN numeric: 4061905085772 Special features ER-32 collet standard SK-shank collet chuck included Delivered as a complete set Designed for precision toolholding FAQ What is included in the set and which components are standard? The V-202 Collet Set includes an SK-shank collet chuck and an assortment of ER-32 collets delivered as an 11-piece set for immediate workshop use. Which spindle taper does the chuck fit? The chuck is supplied with an SK shank interface compatible with standard SK tapers used on many milling and drilling spindles. How does ER-32 improve machining accuracy? ER-32 collets offer uniform radial clamping over the tool shank, reducing runout and enabling more consistent cutting results when the V-202 Collet Set is used. Is the set suitable for quick tool changes in production environments? Yes, the complete set format and standard interfaces support faster changeovers and help maintain production throughput with fewer interruptions. Can this product be used across different machines in a mixed fleet? The ER-32 standard and SK shank mounting make the set adaptable to a variety of machines that accept SK tapers, facilitating cross-machine use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-32 Collet Set With Collet Chuck, 11 Pieces - Vertex
Benefit from precise ER‑32 clamping, an integrated Morse taper adaptor and an 11‑piece range that covers common tool sizes; this combination keeps tool changes efficient and runout minimal. Order the collet set directly via Metav Werkzeuge or consult the Metav advisors for tailored selection support. Collet set V-422 — ER‑32 collets with Morse taper collet chuck by Vertex A collet set V-422 designed for secure, repeatable toolholding in milling and drilling operations, supplied as a complete workshop set ER‑32 collets for universal toolholding Includes Morse taper adaptor for MT spindles 11‑piece set for common workshop sizes Robust construction; 3 kg set weight Reliable, high‑precision clamping for consistent results The ER‑32 collet system in this set provides precision clamping that reduces radial play and supports consistent machining tolerances. By using a standardised collet form, the set ensures uniform contact around the tool shank, which lowers runout and extends tool life. The included Morse taper adaptor enables mounting in spindles and arbors that accept MT fittings, widening compatibility without compromising concentricity. This combination of features translates into fewer rejected parts and improved process stability for production and workshop tasks. Faster changeovers and broad compatibility to save time Supplied as an 11‑piece set, the assortment reduces tool-change downtime by covering commonly used diameters within the ER‑32 range, making it a pragmatic choice for mixed‑batch work. The compact set format keeps essential sizes at hand, helping to streamline setups and cut non‑productive time. At approximately 3 kg, the set is robust enough for regular workshop handling while remaining easy to store and transport between workstations. The practical benefit is a noticeable improvement in throughput for small to medium production runs. Durable design that lowers maintenance and downtime Manufactured by Vertex, the components are engineered for repeated clamping cycles and straightforward upkeep. Routine care—cleaning contact surfaces, checking seats for debris and replacing visibly worn collets—preserves the clamping accuracy that the system delivers. The modular nature of the set also means individual pieces can be exchanged as needed, rather than replacing the entire kit, which supports a cost‑efficient maintenance approach. This results in dependable toolholding performance that protects spindle bearings and cutting tools over time. Contact Metav Werkzeuge in Emmerich for bespoke advice on the Vertex collet set V-422 and secure swift dispatch from our European stock Technical data Article number: V-422 GTIN: 4061905086007 Facts Weight: 3 kg Pieces per set: 11 Special features Collet system: ER‑32 Mount: Morse taper (MT) Set type: Collets with collet chuck in set Manufacturer: Vertex FAQ Which tool shank diameters are covered by this collet set? The collet set V-422 from Vertex comprises the standard range of sizes within the ER‑32 system, offering coverage for the most commonly used shank diameters in workshop applications. Can the set be used in machines with a Morse taper spindle? Yes. The set includes a Morse taper adaptor, so the Vertex collet set V-422 can be mounted in compatible MT spindles and arbors. Is this collet set suitable for milling and drilling operations? The Vertex collet set V-422 is designed for secure, repeatable clamping in both milling and drilling contexts, supporting stable machining and reduced tool vibration. How should the collets be maintained to preserve accuracy? Regular cleaning of contact surfaces, inspection for wear and correct seating in the collet chuck are recommended for the Vertex collet set V-422 to maintain clamping precision and extend service life. What are the product identifiers for ordering and inventory? SKU: V-422; GTIN: 4061905086007 — referenced for the Vertex collet set V-422 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Precise, repeatable clamping for high-speed machining
Collets provide radial, 360-degree clamping that secures cylindrical tools and rod-shaped workpieces with outstanding concentricity and holding force. Designed from high-grade spring steel, these split clamping elements combine excellent runout accuracy with the grip required for vibration-reduced high-speed cutting (HSC) on modern CNC mills and turning centres.
How collets work and where they add value
The clamping principle relies on the radial elasticity of the split collet: when the collet is pushed into a tapered seat—either by tightening a nut in a collet chuck or by a pull stud and drawbar action—the slots constrict uniformly and the bore closes concentrically around the tool or workpiece. This uniform, full-circumference contact prevents pressure marks that occur with side clamping and ensures superior balance for demanding machining tasks. Typical applications include toolholding for end mills and twist drills, and direct spindle mounting for series turning using workholding collets such as 5C.
Practical benefits that improve shop performance
- Improved concentricity and runout for higher surface quality and longer tool life
- Uniform 360-degree force transmission, preventing shaft damage and reducing vibration
- Fast changeover and wide gripping ranges, reducing setup time and improving throughput
- Compatible with standard systems such as ER standard collets and 5C workholding solutions
- Suitable for high-speed cutting and applications requiring high dynamic balance
Metav: workshop precision made accessible
Metav combines decades of measurement and tooling expertise with a comprehensive range that simplifies procurement. Based in Emmerich, Metav operates as a quality filter for the European market and supports more than 48,000 customers. With over 250,000 products available, Metav supplies collets, collet chucks and complementary tooling from a single source—reducing supplier complexity and ensuring reliable delivery straight to the shop floor.
Technical data at a glance
- material: high-grade spring steel
- clamping principle: radial elasticity, split collet design
- force distribution: 360-degree force transmission
- compatibility: ER standard collets; steep taper and Morse taper chuck interfaces
- workholding types: toolholding collets, 5C workpiece collets, pull-stud/drawbar systems
- typical set content: collet range, collet chuck with taper, tightening wrench, protective storage case
- application: high-speed cutting (HSC), CNC milling, CNC turning, series bar turning
- advantages: reduced vibration, high dynamic balance, material-friendly clamping
FAQ
What are the main differences between ER collets and 5C collets?
ER collets are typically used for toolholding in collet chucks and offer a broad gripping range for taper-mounted chucks, while 5C collets are common as workpiece-holding collets for direct spindle mounting in lathes and fixture systems.
Can collets handle high-speed machining?
Yes. Collets made from high-grade spring steel, offering uniform clamping and excellent dynamic balance, are well suited to high-speed cutting (HSC) applications on modern CNC centres.
How does the 360-degree clamping benefit surface finish and tool life?
The full-circumference contact distributes clamping forces evenly, preventing localised deformation and vibration; this improves surface finish and extends tool life thanks to reduced runout and better balance.
Why choose Metav for collets and tooling?
Metav combines hands-on industry expertise with a broad product range and a strict quality filter in Emmerich, making it a dependable partner for procuring collets, collet chucks and associated tooling for professional workshops.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com