100 kg Single-Point Load Cell, Anodised Aluminium, IP65, OIML C3, 2 mV/V - KERN
€77.00
Product information "100 kg Single-Point Load Cell, Anodised Aluminium, IP65, OIML C3, 2 mV/V - KERN"
Take advantage of the combination of precise metrological performance, robust environmental protection and straightforward electrical integration to maintain consistent weighing accuracy in production. Order the component directly via Metav Werkzeuge or consult our specialists for application support and compatibility advice.
CP.100-3P3 Single‑Point load cell — 100 kg capacity, anodised aluminium (KERN)
A CP.100-3P3 Single‑Point load cell designed for bench and platform scales, suitable for industrial, packaging and food‑grade weighing applications
- Single‑Point construction for easy platform integration
- Rated capacity 100 kg and high nominal output 2 mV/V
- Durable anodised aluminium body for corrosion resistance
- Protection class IP65 for wet or dusty environments
- Compatible with price‑computing, bench and platform scales
Consistent accuracy to keep production on spec
The single‑point design provides a stable load introduction point that simplifies mounting for common platform formats and reduces weighing errors across the surface. With a nominal output of 2 mV/V, this weighing sensor delivers a clear signal level that supports precise analogue amplification and digital conversion, which helps to maintain repeatable results in counting and price‑calculation applications. The rated capacity of 100 kg together with compatibility for platforms up to 350×400 mm makes the transducer suitable for bench and medium‑sized platform scales used in packaging and assembly lines.
Built to resist industrial conditions
Designed in anodised aluminium, the housing is lightweight yet resistant to corrosion and mechanical wear, supporting long service intervals and predictable behaviour under load. The enclosure meets IP65 ingress protection and the operating range of -35°C to 65°C allows deployment in chilled production, cold stores and hot manufacturing environments without compromising measurement stability. Compliance with CE and RoHS underlines adherence to regulatory requirements relevant for food, pharma and general industrial use.
Simple integration and dependable signal handling
Electrical fitting is carried out via a 4‑wire connection, enabling straightforward installation and reducing wiring complexity when retrofitting scales or replacing a sensor. The sensor’s standardised output and mechanical form factor make calibration and setup faster during commissioning, lowering downtime for scale replacement. Lightweight construction (approx. 0.39 kg) and single‑point mounting reduce mechanical stress on the platform frame, helping to preserve structural alignment and long‑term accuracy.
A reliable partner for precision weighing components
Sourcing the CP.100-3P3 through Metav Werkzeuge brings the advantage of a specialist distributor that combines technical expertise with a broad product range. Metav’s approach to the democratisation of precision ensures access to vetted components, backed by a European quality filter from Emmerich. With a decades‑long presence in the industry and a comprehensive offering for workshop and industrial users, Metav supports predictable supply and documented product suitability for production environments.
Contact Metav Werkzeuge for a tailored compatibility check, request the detailed technical datasheet or discuss integration options — email info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271
Technical data
- SKU: CP.100-3P3
- Article number: CP P3
- Manufacturer: KERN
- Product category: Load cells
- GTIN: 4045761254022
- Country of origin: CN
Numeric data
- Rated capacity: 100 kg
- Nominal output: 2 mV/V
- Protection class: IP65
- OIML class: C3
- Weight: 0.39 kg
- Max. recommended platform size: 350×400×0 mm
- Operating temperature: -35°C to 65°C
- HS code: 84239010
- Norm: EN 60529
Materials & features
- Material: Aluminium, anodised
- Connection: 4‑wire connection
- Conformity: CE and RoHS
- Suitable for: price‑computing scales, bench scales, platform scales
- Application areas: industry, packaging, food and pharma, machinery and plant engineering, research and development
- OIML R60 C4 available on request
FAQ
What maximum capacity is supported by this load cell?
The CP.100-3P3 is rated for 100 kg and is intended for bench and medium platform applications where that range is required.
Can the transducer be used in damp or washdown environments?
Yes — the sensor is rated IP65, providing reliable protection against dust ingress and low‑pressure water jets, making it suitable for many washdown or wet area conditions.
Is the load cell compatible with existing bench scale platforms?
The single‑point form factor and the maximum platform recommendation of 350×400 mm make the unit compatible with most bench and small platform scales; mechanical adaptation may be required for non‑standard frames.
What electrical connection is required for installation?
Installation uses a 4‑wire connection, which is standard for many analogue scale amplifiers and indicators, simplifying wiring and calibration.
Does the product meet legal metrology standards for trade?
The device is classified as C3; higher metrological classes such as OIML R60 C4 are available on request depending on certification needs.
KERN — Country of origin: CN
Zubehör
Benefit from precise, network-ready weighing data and flexible interfaces: the combination of USB/RS-232 connectivity, IoT-ready operation and DIN-rail mounting simplifies integration into production lines and conveyor systems. Order the device directly via Metav Werkzeuge or contact our consultants for configuration support. KERN YKV-01 — Digital weigh transmitter with USB & RS-232, IoT-ready The KERN YKV-01 is a compact digital weigh transmitter designed for industrial scales and automated weighing systems, enabling fast data capture and reliable transfer to computers, PLCs and networked applications. IoT-ready for Industry 4.0 USB and RS-232 interfaces DIN-rail and wall mounting Configurable transmission formats Seamless data flow for automated production The transmitter delivers fast, configurable data transfer, making it suitable for integration into automated lines and process control systems. With native USB and RS-232 interfaces and freely configurable transmission formats, measurement values can be forwarded directly to PCs, PLCs or MES environments. The included software allows calibration, large-format display and export of results into common enterprise systems such as SAP and Oracle, reducing manual transcription and improving production traceability. Compact, robust design that fits industrial spaces Engineered for demanding environments, the unit combines a small footprint ()100×140×36 mm() with a lightweight construction of )0.33 kg(), so it fits neatly in control cabinets or on mounting rails. The plastic die-cast housing resists everyday workshop stresses while permitting both DIN-rail and wall mounting for flexible installation. Power is supplied via USB with a detachable power adapter and included EURO/UK/US adapters, eliminating the need for internal batteries and simplifying service routines. Rated for operation between -10°C and 40°C, the transmitter is suitable for a wide range of industrial settings. Accurate signals and simple configuration for reliable throughput Measurement tasks are handled with essential functions such as weigh and tare, while a measurement frequency of 10 Hz ensures smooth value updates for moving loads on conveyors. The bundled configuration tools enable fast setup and adjustment without specialised equipment, and compatibility with KERN weighing platforms streamlines roll-out across multiple stations. By converting raw readings into ready-to-use formats, the system reduces error sources and supports faster, more economic process control—reflecting a practical approach to Industry 4.0 integration and operational efficiency. For tailored advice on system integration and to procure the KERN YKV-01 through Metav Werkzeuge in Emmerich, contact our consultants by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: YKV-01 Manufacturer: KERN GTIN: 4045761215290 Origin country: CN Facts Dimensions: 100×140×36 mm Weight: 0.33 kg Measurement frequency: 10 Hz Input voltage: 100 V - 240 V, 50 / 60 Hz Operating temperature: -10°C–40°C Special features Material: Plastic Data output: USB + RS-232 Power: USB with detachable power supply Included adapters: EURO; UK; US Mounting: Wall and DIN-rail Functions: Weigh, tare Configuration software included Compatible with all KERN weighing platforms No battery FAQ Is the transmitter compatible with existing KERN platforms? Yes. The KERN YKV-01 is designed for compatibility with KERN weighing platforms and can be connected to existing load cells and platforms without additional converters. Which interfaces are available for data transfer? The device provides USB and RS-232 outputs; transmission formats are freely configurable to match controller or PC requirements. Can the unit be powered from the USB port? Yes. The KERN YKV-01 is powered via USB and ships with a detachable power supply plus EURO, UK and US adapters. Is the transmitter suitable for conveyor-belt applications? Yes. With a 10 Hz measurement rate and configurable output, the transmitter supports dynamic weighing and data forwarding on conveyor systems and production lines. What mounting options are available? The unit supports both DIN-rail and wall mounting for flexible placement within control cabinets or on machine frames. Does the package include configuration tools? Yes. The KERN YKV-01 includes configuration software for calibration, large-format display and data export to other applications. Manufacturer: KERN — Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
Benefit from a compact, IoT-ready transmitter that combines versatile interfaces and simple USB power for fast integration and reliable weight data transfer; order directly via Metav Werkzeuge or consult our team for system-specific advice. KERN YKV-02 — Digital weight transmitter with Ethernet, USB and RS‑232 interfaces The KERN YKV-02 is a compact digital weight transmitter for industrial scales, designed to capture and forward weighing data to networks, PLCs and computers for automated process control. IoT-ready for Industry 4.0 integration Ethernet, USB and RS‑232 interfaces USB-powered with EU/UK/US adapters included DIN-rail and wall-mountable robust housing Rapid integration into automated systems The YKV‑02 enables fast data transfer from a weighing platform to higher‑level systems, supporting Ethernet, USB and RS‑232 interfaces as standard. This combination ensures straightforward connectivity to PCs, PLCs and networked systems, allowing measurement results to be converted into formats compatible with enterprise software (for example SAP or Oracle). The device’s IoT-ready architecture reduces integration time and helps maintain continuous production flow by enabling automated data capture and downstream processing. Dependable measurement performance with efficient power Designed for continuous operation, the transmitter samples at 10 Hz, delivering timely weight updates suitable for conveyor and batching applications. The unit is powered via the USB connector, simplifying wiring and enabling centralised power management; a detachable USB power supply with EU/UK/US plug options is included. Such a power arrangement lowers installation complexity while keeping the control cabinet tidy and energy use efficient, which supports predictable runtime and easier maintenance planning. Space-saving, robust design for industrial environments Housed in a robust plastic die‑cast enclosure, the transmitter combines compact dimensions (100×140×35 mm) with a low mass (0.34 kg), making it suitable for wall mounting or DIN‑rail installation in control panels. The compact form factor conserves valuable cabinet space and protects the electronics in standard industrial settings. Compatibility with existing KERN weighing platforms ensures a reliable mechanical and electrical interface, reducing the risk of retrofit issues when upgrading or expanding weighing points on lines and stations. Ready-to-use package with configuration tools The YKV‑02 is supplied with the necessary accessories to get a weighing point online quickly: the digital transmitter itself, a USB cable with detachable power supply, a DIN‑rail bracket and configuration software. The included software supports calibration, adjustment and large-format visualisation of measured values on a PC, plus export and data handover to other applications. Clear configuration options and freely selectable transmission formats make it easier to standardise data flow across multiple devices and reporting systems, shortening commissioning time and reducing engineering effort. Discuss system compatibility and integration planning with Metav Werkzeuge — request a tailored connectivity assessment for the KERN YKV‑02 from our Emmerich team or ask our consultants to verify the transmitter’s fit for a specific application Technical data Article number: YKV SKU: YKV-02 GTIN: 4045761220423 Manufacturer: KERN Origin: CN Numbers / Core technical data Dimensions (W×H×D): 100×140×35 mm Weight: 0.34 kg Measurement frequency: 10 Hz Operating temperature: -10 °C – 40 °C Input voltage (power adapter): 100 V – 240 V, 50 / 60 Hz Commodity code: 90160090 eClass: 27320101 Special features Data outputs: Ethernet + USB + RS‑232 Power: USB including detachable power supply Power adapters included: EU; UK; US Housing: robust plastic die‑cast Mounting: wall mount and DIN‑rail bracket included Functions: weighing, taring Software: configuration and data visualisation software included Compatibility: compatible with all KERN weighing platforms Typical applications: industry and manufacturing, chemical, food and pharma, building materials, logistics and packaging FAQ How is the YKV‑02 powered and what adapters are supplied? The KERN YKV‑02 is powered via USB; a detachable USB power supply is supplied with EU, UK and US plug adapters for flexible installation. Can the transmitter connect directly to a PLC or network? Yes. The transmitter offers Ethernet and RS‑232 interfaces in addition to USB, enabling direct connection to PLCs, networked systems and PCs for automated data exchange. What sample rate does the unit provide for weight readings? The unit provides a measurement frequency of 10 Hz, suitable for steady conveyor weighing and process monitoring where frequent updates are required. Is mounting hardware included for control cabinet installation? A DIN‑rail bracket and wall‑mounting option are included, allowing installation inside control cabinets or on panels with minimal additional hardware. Does the package include software for calibration and data export? Yes. The YKV‑02 is supplied with configuration software that supports calibration, large‑format display of values and export of results into formats compatible with enterprise systems. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271