Precision dial indicators for accurate length and runout checks
Dial indicators and related gauges provide precise measurement of small lengths and deviations, serving applications such as concentricity, flatness and comparison checks on lathes and milling machines, and offering both digital and analog options to suit different measuring ranges. These instruments are used with appropriate accessories for tasks like depth measurement or runout testing and feature hardened contact faces or balls for reliable contact; typical variants include dial indicators, test indicators and depth gauges. Analog types transmit spindle movement via rack and pinion to the pointer and may include a drag pointer to prevent gear damage, while digital versions give straightforward numeric readouts for quick interpretation. Using these gauges improves setup accuracy, process control and the repeatability of measurements in metalworking and workshop environments.
85mm Extension Rod M2.5 Thread Ø4.5mm Stainless Steel, 85mm - Metav IndustryLine
Take advantage of the combination of stainless steel durability, precise M2.5 thread fit and a compact 85 mm extension length for reliable reach in tight inspection tasks; order directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine extension for dial gauges — 85 mm, M2.5 thread, Ø 4.5 mm The Metav IndustryLine extension for dial gauges is a compact stainless steel rod that increases probe reach for precise measurements in confined spaces, suitable for workshop inspection and assembly operations. Stainless steel construction 85 mm extension length Thread M2.5 for standard dial gauges Ø 4.5 mm probe diameter Extend measurement reach without losing accuracy The primary benefit of an extension rod is increased accessibility: the 85 mm length lets inspection points inside housings or recessed features be reached while maintaining a consistent contact geometry. Manufactured from stainless steel, the rod preserves stiffness over its length and reduces flex that would otherwise introduce measurement error. For shops that must measure inside bores, between flanges or within assembled components, this accessory converts a standard dial gauge into a more versatile inspection tool without altering the indicator's calibration chain. Durable material for repeated workshop use Constructed in stainless steel, the extension offers corrosion resistance and dimensional stability under routine handling and exposure to workshop environments. The passive corrosion protection reduces the need for frequent replacement and helps retain the rod’s precise diameter of Ø 4.5 mm where the probe engages. This reliability translates into less downtime and fewer interruptions in quality checks, supporting continuous production and dependable inspection results. Secure fit and predictable performance A defined M2.5 thread provides a standardised mechanical interface to many dial gauges and magnetic holders, delivering a secure connection that minimises play at the probe junction. The controlled fit prevents unwanted movement during measurement and ensures repeatable contact force transmission from the dial gauge stem to the part. This mechanical consistency is particularly important in quality-control routines where small variances can affect pass/fail decisions. Simple integration into existing setups As a compact accessory, the extension integrates seamlessly into existing measurement kits and setups. Its lightweight, low-profile design keeps the centre of gravity close to the indicator, avoiding large moments that could tilt the instrument during use. For maintenance technicians and quality engineers who require quick adaptation to varied inspection tasks, this rod is a pragmatic addition that broadens the capability of standard dial gauges without additional training. For application-specific guidance or to obtain the Metav IndustryLine extension with M2.5 thread for immediate inclusion in inspection kits, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com — our team will advise on compatibility and supply options. Technical data Article number: M208.063.H GTIN: 4054469104324 eClass: 21170613 ETIM: EC002219 HS tariff number: 90179000 Facts Length: 85 mm Probe diameter: Ø 4.5 mm Thread: M2.5 Material: stainless steel Special features Accessory for dial gauges and measuring instruments Compact extension for confined measurements Corrosion-resistant stainless construction Category: Accessories (measuring instruments) FAQ What is the primary use of this extension? The extension is intended to increase probe reach for dial gauges, enabling measurements in recessed or confined areas while maintaining repeatability. Which dial gauges are compatible with the rod? Compatibility is determined by the M2.5 thread interface; many standard dial gauges accept this thread, and the accessory is part of the Metav IndustryLine range, SKU M208.063.H. Is the extension resistant to workshop corrosion? Yes, the rod is made from stainless steel, offering corrosion resistance suitable for routine workshop environments. Does the extension affect measurement accuracy? When used with a securely fitted dial gauge via the M2.5 thread, the rod provides predictable mechanical behaviour and helps preserve the indicator's accuracy by reducing flex and play. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
89 mm Small Magnetic Measurement Stand 17 kg Holding Force Central Clamping, Permanent Base - Metav IndustryLine
Benefit from a compact footprint, 17 kg holding capacity and a central clamping mechanism that secures fine indicator probes for repeatable results; order the Magnet measuring stand M208.113 directly via Metav Werkzeuge or consult the team for application support. Magnet measuring stand M208.113 — small permanent-base stand with central force clamp A Magnet measuring stand M208.113 for precise probe mounting and stable measurement in confined workshop areas. Compact 89 mm height for tight spaces 17 kg permanent magnetic base Central force clamp for secure probing Dovetail mount for fine indicator probes Stable positioning where space is limited The compact design delivers a small footprint combined with a sturdy permanent base so the stand remains dependable in limited‑space setups. With an overall height of 89 mm and a rated 17 kg holding capacity, the unit provides a low centre of gravity that reduces tilting and improves repeatability during routine checks. The permanent magnet base eliminates the need for external power, while the lightweight construction makes repositioning quick and straightforward without compromising stability. This balance of size and holding power suits bench metrology and assembly stations where access is restricted but stable fixation is essential. Central clamping for consistent probe alignment A central force clamp distributes clamping pressure evenly around the probe stem, reducing lateral shift and ensuring consistent contact force for indicators and feeler probes. The dovetail interface supports common fine indicator styles with dovetail guidance, enabling precise alignment of the probe tip to the measurement point. The combination of a controlled clamp mechanism and a rigid mounting interface improves repeatability and reduces operator‑dependent variance, which is particularly valuable in quality control loops and comparative gauges. Practical workshop integration and handling benefits Designed as a universal holder, the stand features a Ø30×25 foot with M4 fastening for secure mounting and a compact body weight of approximately 0.2 kg, which eases handling and storage. The permanent magnetic base is ready for rapid fixturing on ferrous tables and machine beds, while the overall ergonomics speed up frequent setup changes. For operations that require fast switching between checks, the stand offers reliable fixation without the complexity of powered alternatives. Metav’s quality filter ensures that components arrive tested and suitable for industrial use, supporting consistent throughput on the shop floor. For procurement or application advice on the Metav IndustryLine M208.113, contact Metav Werkzeuge in Emmerich for tailored recommendations and ordering assistance. Technical data Article number: M208.113 GTIN: 4054469104829 Tariff number: 90319000 Facts Height: 89 mm Holding force: 17 kg Weight: 0.2 kg Magnet: permanent Foot: Ø30×25, M4 Special features Central force clamp Dovetail probe mount for fine indicators Universal application Compact footprint for confined workspaces FAQ What is the holding capacity of this magnetic stand? The magnetic base provides a holding capacity of 17 kg for the Magnet measuring stand M208.113, ensuring a secure fixture for typical indicator setups. Which probes fit the dovetail mount? The dovetail mount accepts common fine indicator probes with dovetail guidance; the M208.113 is optimised for small‑form indicators used in bench and machine checks. Is the base permanently magnetic or switchable? The M208.113 is fitted with a permanent magnet base, offering continuous magnetic adhesion without the need for a power source. How does the central force clamp improve measurements? The central force clamp distributes pressure evenly around the probe stem, reducing lateral movement and improving repeatability during repeated measurements with the M208.113. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8mm Ball Contact For Dial Indicator, M2.5 Thread - Metav IndustryLine
Take advantage of the compact 8 mm ball contact and standard M2.5 thread to extend existing dial gauges for reliable contacting in tight or curved areas; the accessory combines simple retrofitting with defined contact geometry for reproducible results — order directly via Metav Werkzeuge or consult our specialists for integration advice. Measuring contact insert M208.172 — Ball Ø8 mm, M2.5 thread (Metav IndustryLine) Measuring contact insert M208.172 for retrofitting dial gauges, offering a spherical contact and standard M2.5 connection for precise surface contact in workshop and inspection tasks. Ball tip Ø 8 mm for defined contact M2.5 threaded connection for dial gauges Compact accessory for precise contacting Suits confined and curved measurement points Precise contacting with a defined spherical tip The spherical 8 mm ball provides a clearly defined contact point that reduces local deformation and concentrates force predictably, which supports repeatable results in comparative and single-point checks. Fitted via the common M2.5 thread, this measuring contact insert converts compatible indicators into versatile probes for shafts, bores and contoured surfaces. The concise geometry simplifies alignment and helps maintain measurement consistency when switching between workpieces. Simple integration into existing measuring chains Designed as an accessory for dial gauges with an M2.5 connection, the insert requires no modification of the instrument body and is installed by screw fitting. This retrofittable approach keeps downtime low and preserves the original gauge characteristics while extending its range of applications. The accessory’s compact form is ideal for confined spaces and point contacts, enabling efficient inspection workflows without additional tooling changes. Robust accessory for workshop and inspection use Although compact, the insert is engineered for frequent handling and repeated seating into contact points; its defined ball geometry reduces the need for repositioning during routine checks. Delivered as a single component with clear identification (SKU: M208.172, GTIN available), the accessory supports systematic measurement procedures in production and quality control. Backed by the Metav IndustryLine approach to accessible precision, this part helps standardise contact measurements across tool rooms and inspection benches. Contact Metav Werkzeuge today to request the M208.172 measuring contact insert for your dial gauges or to obtain specific advice from our specialists at Metav Werkzeuge in Emmerich Technical Data Article number: M208.172 GTIN: 4054469105222 Tariff number: 90319000 Manufacturer: Metav IndustryLine Facts Ball diameter: 8 mm Thread: M2.5 Weight: 0.1 kg Compatibility & Features For dial gauges with M2.5 connection Category: Accessories (Zubehör) ECLASS: 21170324 FAQ What instruments is this insert compatible with? The insert is compatible with dial gauges that have an M2.5 thread interface; it converts the indicator into a probe suitable for point and curved-surface contacts. How does the 8 mm ball tip affect measurement results? The 8 mm ball provides a defined contact area that limits local deformation and yields reproducible contact conditions, improving repeatability for single-point checks. Is the insert suitable for confined or curved surfaces? Yes, the compact spherical contact is particularly suited to confined spaces and curved geometries where flat or larger tips cannot reliably seat. Can the insert be fitted without modifying the indicator? Fitting requires only the standard M2.5 screw interface; no modification of the gauge body is necessary when using the M208.172 insert. Does the product include calibration or certification? The delivery contents do not state calibration by default; check the specific instrument’s documentation or request calibration options when ordering the insert M208.172. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8mm Shaft Ignition Timing Adjuster M10x1 For Dial Indicator, For Fitting Dial Gauges - Metav IndustryLine
Compact, threaded adapter for reliable timing checks: the M10x1 thread and compatibility with all dial indicators with an 8 mm shank deliver a secure, concentric fit that shortens setup time and improves measurement repeatability. Lightweight at 0.1 kg, the device is easy to handle during repetitive workshop routines and reduces the risk of setup errors. Order the (Ignition Timing Setting Tool M10x1 for dial indicator with 8 mm shank) directly via (Metav Werkzeuge) or ask our consultants if needed. Ignition Timing Setting Tool M10x1 — Dial-indicator Adapter (Metav IndustryLine) The Ignition Timing Setting Tool M10x1 for a dial indicator with 8 mm shank is an accessory designed to mount dial indicators securely for engine timing and precision measurement tasks. M10x1 threaded mount for secure fixing Compatible with all 8 mm shank dial indicators Lightweight 0.1 kg for easy handling Designed for quick and repeatable setup Faster, repeatable timing setups that save workshop time The adapter provides a stable, concentric connection between a measuring instrument and the engine or fixture, delivering repeatable readings that reduce trial-and-error during timing checks. Thanks to the M10x1 thread and the precise 8 mm shank interface, radial and axial play are minimised, which lowers the risk of measurement variance caused by imperfect mounting. This benefit translates directly into less rework, faster diagnostic cycles and a more efficient shop floor process. Broad compatibility with dial indicators for flexible use Built to accept all dial indicators with an 8 mm shank, the accessory acts as a universal mounting solution in mixed-equipment environments. The clear mechanical interface removes uncertainty when pairing gauges from different manufacturers and allows technicians to reuse existing measuring heads without bespoke adaptors. The combination of compatibility and a compact design supports diverse applications, from engine timing to bench verification tasks, enhancing the utility of existing measuring assets. Practical workshop advantages and handling comfort With a mass of only 0.1 kg, the tool is easy to manoeuvre into position during repetitive measurement tasks and causes minimal additional load on magnetic bases or articulated stands. The simple threaded engagement ensures secure retention during vibration-prone operations, giving confidence that the installed dial indicator will remain true during the measurement sequence. As an accessory part it streamlines set-up routines and supports consistent measurement practice across multiple operators. Choose the Metav IndustryLine ignition timing adapter for dependable dial-indicator mounting — contact Metav Werkzeuge for purchase details or technical advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M208.151 GTIN: 4061905042980 ECLASS: 21179203 Facts Weight: 0.1 kg Thread: M10x1,0 Shank compatibility: 8 mm Special features For installation of dial indicators Compatible with all dial indicators with 8 mm shank Intended as accessory for ignition-timing and precision checks Category: Zubehör (measuring-device accessory) FAQ What dial indicators fit this adapter? The adapter accepts any dial indicator with an 8 mm shank; the Ignition Timing Setting Tool M10x1 is specified for that shank diameter and provides a standard M10x1 threaded mounting. Can the adapter be used for other measurement tasks besides engine timing? Yes. While optimised for ignition-timing setups, the adapter is equally suitable for any application that requires secure mounting of an 8 mm-shank dial indicator during bench or in-situ measurements. How secure is the threaded connection during vibration-prone operations? The M10x1 thread provides a positive mechanical connection that keeps the dial indicator stable; the lightweight design also minimises additional load on supports, improving retention in vibrating environments. Is the device lightweight enough for handheld adjustments? At 0.1 kg, the accessory offers comfortable handling for quick adjustments and repeated setups without introducing significant mass to the measuring assembly. What is the article number or SKU for ordering? Order using SKU M208.151; the product is listed as the Ignition Timing Setting Tool M10x1 for dial indicator with 8 mm shank under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9 mm Depth Gauge With 25 mm Stop, 1.5 mm Probe, Digital, Preset And Reversible Measurement - Metav IndustryLine
Take advantage of a compact measuring instrument that combines high resolution (0.01 mm) with industry-grade accuracy (±0.02 mm) and intuitive operation via preset and reversible measuring direction; order or request advice from Metav Werkzeuge for swift delivery and reliable workshop integration. Digital depth gauge 9 mm, stop 25 mm with measuring pin Ø1.5 mm — Metav IndustryLine The Digital depth gauge 9 mm, stop 25 mm with measuring pin Ø1.5 mm is a compact electronic depth gauge engineered for precise depth checks in small bores and tight workpieces across precision engineering and toolroom environments. Digital display 0.01 mm resolution Compact 9 mm measurement range Preset and reversible measuring direction Measuring pin Ø1.5 mm for small bores Precision in confined spaces improves inspection confidence This compact instrument delivers a 9 mm measurement range with a fine 0.01 mm display resolution and an accuracy of ±0.02 mm, making it ideal where small tolerances matter. The slim measuring stem and Ø1.5 mm measuring pin are engineered for insertion into narrow bores and recesses, permitting repeatable depth checks without adapting fixtures. The electronic readout removes reading ambiguity associated with analogue scales, ensuring faster decisions during quality control and setup tasks. Faster, repeatable measurements reduce cycle time Equipped with a preset function and reversible measuring direction, the gauge allows pre‑setting of reference depths and quick switching between measurement directions for different operation flows. This reduces handling steps and the potential for operator error, supporting lean inspection processes. The device’s lightweight construction and clear digital display contribute to efficient routine checks, so single‑operator measurements can be completed more reliably and with less fatigue. Designed for workshop reliability and straightforward use Built to fit the demands of fine mechanical and workshop use, the instrument combines a robust digital module with a compact mechanical assembly weighing approximately 0.62 kg. The simple control scheme and clear readout make it accessible for staff with varied experience, while the precise mechanics support consistent results across repeated checks. Classification as a micro range depth gauge emphasises suitability for small bores and precision tasks where space and repeatability are decisive. For precision depth checking in small bores, contact Metav Werkzeuge to discuss the Metav IndustryLine digital depth gauge and to arrange purchasing or technical clarification; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: M301.053.2 GTIN: 4054469184586 Manufacturer: Metav IndustryLine Facts Measurement range: 0–9 mm Resolution: 0.01 mm Accuracy: ±0.02 mm Weight: 0.62 kg Measuring pin: Ø1.5 × 10 mm Stop length: 25 mm Special features Digital display Preset function Reversible measuring direction Compact micro range for small bores Category: Depth gauges (Messuhren) ECLASS: 21170308 FAQ What is the smallest depth this gauge can display? The gauge displays depths down to 0.01 mm increments; the device’s resolution is 0.01 mm, enabling fine differentiation within its 0–9 mm range. Is the instrument suitable for very small bore measurements? Yes. The slim Ø1.5 mm measuring pin and the compact micro range make it suitable for depth checks in small bores and narrow recesses. How repeatable are measurements with this digital depth gauge? Repeatability benefits from the digital readout and the preset plus reversible measuring direction functions, which reduce handling variation and support consistent measurements. Can the gauge be used for production spot checks? The combination of ±0.02 mm accuracy and fast electronic readout makes the gauge suitable for routine production spot checks and setup verification in precision work. Which brand and SKU identify this instrument? This instrument is the Metav IndustryLine digital depth gauge, SKU M301.053.2, intended for precise depth measurement in small components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9 mm Digital Depth Gauge With 16 mm Stop, 1.5 mm Probe, Preset And Reversible Direction, 0.01 mm Resolution - Metav IndustryLine
Take advantage of the combination of compact 9 mm range, 0.01 mm resolution and a slim probe Ø1.5 mm for reliable depth measurements in confined bores; the preset and reversible measuring direction speeds up repetitive checks. Order the depth gauge directly via Metav Werkzeuge or consult our technical advisors if required. Digital depth gauge M301.053.1 — 9 mm range, 0.01 mm resolution (Metav IndustryLine) A Digital depth gauge M301.053.1 designed for precise depth measurement in very small bores and micro‑components, offering a compact format and a robust stop for repeatable positioning. Preset and reversible measuring direction 9 mm measuring range for micro bores 0.01 mm display resolution, 0.02 mm accuracy Probe Ø1.5 mm with 16 mm stop Precise measurement in confined spaces improves inspection reliability This compact depth instrument delivers a 9 mm range tailored to very small bores and fine mechanical components, where access and repeatability matter most. The slim probe Ø1.5 mm (measuring insert Ø1.5 x 10 mm) reaches narrow holes that standard instruments cannot, while the 16 mm stop ensures reliable seating for repeat measurements. The preset feature together with the reversible measuring direction reduces handling steps and secures consistent start conditions, which in practice lowers operator‑induced variation and speeds up batch inspections. Clear digital readout and defined measurement tolerance for quality control Equipped with a digital display and 0.01 mm resolution, the instrument provides legible readings for routine checks and fine adjustments. The specified accuracy of ±0.02 mm corresponds to industrial expectations for compact digital gauges and is suitable for standard workshop quality control. Resolution and accuracy are different: resolution is the smallest step shown on the display, while accuracy describes the maximum deviation expected from the true value. This distinction supports informed decisions when documenting results or comparing to tolerance specifications on inspection sheets. Practical design for the workshop and production floor The gauge's compact design and modest weight (0.62 kg) make it easy to position on a bench or hold steadily for short measuring tasks, without sacrificing stability. A durable digital mechanism and the slim probe reduce the need for specialised fixturing in small‑part work, so setups are quicker and throughput improves. Typical applications include precision drilling checks, mould and tool inspection, electronics housings and watchmaker components — wherever tight access and reliable depth data are required. Metav IndustryLine positions this tool as an affordable precision aid for any workshop seeking consistent micro‑depth control. For professional micro‑depth measurement, request the Metav IndustryLine digital depth gauge through Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and delivery options. Technical Data Article number: M301.053.1 GTIN: 4054469184579 Manufacturer: Metav IndustryLine Category: Measuring instruments / Dial gauges Core data Measuring range: 0–9 mm Display resolution: 0.01 mm Accuracy: ±0.02 mm Weight: 0.62 kg Probe diameter: Ø1.5 mm Special features Preset function Reversible measuring direction Stop length: 16 mm Measuring insert: Ø1.5 x 10 mm Digital display FAQ What is the smallest depth this gauge can measure accurately? The instrument shows to 0.01 mm and the guaranteed accuracy is ±0.02 mm; for practical purposes depths within the 0–9 mm range are covered with industrial standard repeatability using the Metav IndustryLine digital depth gauge M301.053.1 (SKU M301.053.1). Is the probe suitable for very narrow or deep holes? Yes — the probe Ø1.5 mm with a measuring insert of Ø1.5 x 10 mm is specifically intended for small bores where a larger probe would not fit. How does the preset function help in serial measurements? The preset allows a reference position to be stored so that multiple parts can be measured against the same datum quickly, improving throughput and consistency during repetitive checks. Can this gauge be used in watchmaking and micro‑mechanics? The compact format, slim probe and 9 mm range make the instrument well suited to watchmaking, micro‑mechanical assemblies and similar fine‑precision tasks. What advantages does the reversible measuring direction offer? Reversible measuring direction enables readings to be taken whether the slide is moved in or out, reducing operator handling and avoiding repositioning of delicate parts during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90mm Extension For Dial Indicator, M2.5 Thread, Ø4.5mm Stainless Steel - Metav IndustryLine
Take advantage of the compact 90 mm extension and precision M2.5 connection to extend measurement reach without compromising repeatability; order the accessory directly via Metav Werkzeuge or contact our consultants for application advice. Extension for dial gauges M208.063.9 — 90 mm length, M2.5 thread An Extension for dial gauges designed to increase measuring reach for dial indicators and test probes in workshop and inspection environments. 90 mm extension length M2.5 connection thread 4.5 mm mounting diameter Stainless steel construction Extend measurement reach with consistent repeatability This compact gauge extension adds an extra 90 mm of reach while maintaining a stable measuring axis, making it suitable for inspections where the indicator must clear fixtures or edges. The accessory’s M2.5 connection ensures a defined mechanical interface with most dial indicators and comparators that use this thread standard, so alignment remains reproducible between measurements. The practical benefit is fewer setup iterations and more efficient inspection cycles, particularly when measuring recessed features or components in jigged assemblies. Built for shop-floor durability and corrosion resistance Crafted from stainless steel, the extension resists coolant splash and workshop contaminants, which prolongs service life and reduces the need for frequent replacement. The robust material choice delivers dimensional stability under typical workshop temperatures and handling, supporting reliable results over time. This means maintenance intervals can be extended and downtime reduced, contributing to a steadier production flow for routine quality checks. Compact connection for fast integration and secure mounting With a 4.5 mm mounting diameter and a standardised M2.5 thread, the extension integrates quickly into existing measurement setups without adapters. The slim profile keeps the probe path unobstructed while adding reach, enabling measurements in confined or obstructed areas without sacrificing the indicator’s leverage or reading clarity. Compatibility with common dial indicators and the accessory’s uncomplicated mechanical coupling provide a pragmatic solution for small adaptations in the inspection process. Choose the Metav IndustryLine extension M208.063.9 for dependable extra reach and straightforward integration — contact Metav Werkzeuge in Emmerich by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for ordering or technical clarification Technical data Article number: M208.063.9 GTIN: 4054469104249 ECLASS: 21170613 ETIM: EC002219 Tariff number: 90179000 Core specifications Length: 90 mm Mounting diameter: 4.5 mm Connection thread: M2.5 Materials & compatibility Material: stainless steel Category: Accessories for measuring instruments Brand: Metav IndustryLine FAQ What thread standard does the extension use and which indicators fit it? The extension uses an M2.5 connection thread and fits dial indicators and comparators equipped for an M2.5 mounting interface; check the indicator’s specification for compatibility. Is the extension suitable for use in a coolant-prone environment? Yes—the stainless steel construction provides corrosion resistance appropriate for workshop environments where occasional coolant or splash contact occurs. Can the accessory help when measuring recessed features? Yes; the 90 mm extension gives additional reach so dial indicators can access recessed faces or features without repositioning the workpiece. Does the extension require special adapters for common dial gauges? No special adapters are usually required for indicators with an M2.5 mounting; the standard thread provides a direct mechanical connection. Is the product supplied with a calibration certificate? A calibration certificate is not included as standard with this accessory; calibration and certification options can be discussed with Metav Werkzeuge if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
95mm Extension Rod for Dial Indicators M2.5 Thread Ø4.5mm Stainless Steel - Metav IndustryLine
Combine the corrosion-resistant stainless steel construction with a slender 95 mm reach and standard M2.5 thread to extend probe access without compromising measurement stability; order directly via Metav Werkzeuge or contact our consultants for compatibility advice. Extension for Dial Indicators M208.063.I — 95 mm stainless steel, M2.5 thread (Metav IndustryLine) The Extension for Dial Indicators M208.063.I is a compact probe extension designed to increase reach for confined or recessed measurement points in workshop and inspection setups. 95 mm slim extension for deep reaches Threaded M2.5 connection for standard probes Stainless steel corrosion-resistant construction Lightweight 10 g for minimal probe loading Reach confined measurement points with confidence The compact 95 mm length provides additional access for recessed bores, stepped surfaces and narrow fixtures while keeping the probe geometry predictable. Made from stainless steel, the rod resists surface corrosion and maintains a smooth bearing against gauge tips, which helps preserve repeatability. As an accessory for precision measuring devices, the extension keeps added inertia low so that the indicator's response remains reliable. Minimal influence on measurement dynamics Engineered to be lightweight at around 10 g, the extension reduces additional loading on the measuring instrument, limiting probe deflection and dynamic error. The standard M2.5 threaded interface ensures secure mechanical engagement with most dial gauges and indicator probes that use this common connection, providing a stable transmission of contact forces. This combination supports accurate readings in quality control and workshop inspection without requiring modification of existing fixtures. Durable, compatible and easy to integrate Corrosion resistance and a smooth external finish make the rod easy to clean and suitable for regular workshop use, from metrology benches to on-machine checks. The slim Ø 4.5 mm profile is beneficial when routing the probe into narrow openings, and the simple threaded mount lets the accessory be swapped quickly between instruments. Supplied as a straightforward retrofit part, the probe extension integrates with standard measuring toolsets and contributes to efficient inspection workflows. For procurement or technical queries about this Metav IndustryLine extension, contact Metav Werkzeuge for sourcing and compatibility support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M208.063.I GTIN: 4054469104331 Tariff number: 90179000 Category: Measuring instruments > Accessories Facts Length: 95 mm Diameter: 4.5 mm Thread: M2.5 Weight: 10 g Special features Material: stainless steel Application: extension for dial indicators and probe tips Accessory type: measuring device accessory Compact, corrosion-resistant design FAQ Which thread is used for mounting? The accessory uses a standard M2.5 thread; the Extension for Dial Indicators M208.063.I from Metav IndustryLine mounts to dial indicator probes with an M2.5 connection. Is the rod suitable for use in humid or oily workshop environments? Yes. The extension is made of stainless steel, which offers corrosion resistance and is appropriate for regular workshop conditions when cleaned and maintained. Will the extension affect indicator accuracy? When used with suitable indicators the lightweight 10 g rod minimises additional loading; proper mounting ensures that measurement dynamics remain largely unchanged for routine inspection tasks using the M208.063.I extension. What diameter is the probe shaft and why does it matter? The shaft diameter is 4.5 mm, providing a slim profile that allows access into narrow or recessed features while keeping sufficient stiffness for repeatable contact transfer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fühlhebelmessgerät mit seitlicher Antastung
Fühlhebelmessgerät mit seitlicher Antastung analog für akkurate Messungen im Bereich 0mm bis 0.8mm. Detailinformationen und Technische Daten zu Fühlhebelmessgerät : Hersteller: Metav IndustryLine Bezeichnung: Fühlhebelmessgerät mit seitlicher Antastung Messbereich: 0mm bis 0.8mm Auslieferung im Kasten/Behältnis Norm: DIN 2270, Ablesung: 0.01 mm Genauigkeit: 0,02 mm Bezifferung: 0-40-0 Durchmesser Uhr: 30 mm bis 32 mm Gewicht: 0,05 kg bis 0,1 kg Messtechnik: Analog Mit HM-bestücktem Messeinsatz Messeinsatz: ⌀ mit Hartmetallkugel bestücktem Messeinsatz ⌀2 mm mm Umkehr der Messrichtung: manuell Zubehör inklusive: mit Schwalbenschwanzführungen für Einspannschaft Ø6mm und Ø8mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Magnetstative sind eine wertvolle Ergänzung für ein Fühlhebelmessgerät. Magnetstative finden Sie hier.
M10x1 Timing Dial Gauge Kit With 30–60mm Extensions, Aluminium Case - Metav IndustryLine
Take advantage of precise, repeatable ignition timing checks thanks to the combination of a compact dial gauge interface and a set of four extensions (30, 40, 50, 60 mm) for varied engine geometries; order directly via Metav Werkzeuge or consult the technical team for application guidance. Ignition timing setting kit M10x1 mm with dial gauge, 30–60 mm extensions — Metav IndustryLine The Ignition timing setting kit M10x1 mm provides a compact measuring solution for determining ignition timing and engine top-dead-centre in passenger cars and motorcycles, supplied as a workshop-ready set with protective case. *Compact dial gauge mount Ø8 mm *Includes 30, 40, 50 and 60 mm extensions *Fits common spark plug bores M10x1/M18x1.5 *Supplied in protective aluminium case Reliable, repeatable measurement for ignition timing The set is engineered to deliver repeatable readings when establishing ignition timing. The adapter set (including M10x1 and M18x1.5) is compatible with the standard spark-plug bores found in many cars and motorcycles, while the dial gauge interface accepts instruments with a Ø8 mm mounting. These features ensure that a single gauge can be transferred between engines without time-consuming adaptions, improving measurement throughput and reducing setup variability. The compact gauge interface and precise mechanical coupling support consistent contact and clear indication of piston position, translating technical accuracy into fewer engine adjustments and less rework. Flexible extension set adapts to different engine designs Four hardened extensions (30, 40, 50, 60 mm) provide flexibility across shallow and deep spark-plug wells as well as differing combustion-chamber layouts. The staged lengths permit selection of the optimum reach while maintaining the alignment of the gauge stem, reducing lever action and measurement error. Supplied in a robust aluminium case for transport and organised storage, the kit combines portability with protection: the complete set is lightweight (approx. 0.3 kg) and is intended to travel between bench and engine bay without adding unnecessary bulk. This makes the accessory set particularly suitable where rapid changeover between engines is required. Workshop-ready handling and straightforward setup The kit’s mechanical design emphasises straightforward attachment and stable positioning. The dial gauge interface accepts standard gauge stems and the small 10 mm indicator face keeps the instrument compact where space above the plug is limited. Together these aspects simplify alignment and enable fast readings even in constrained engine bays. The set is classified for practical workshop use: it combines adaptability with a clear focus on reliable measurement transfer and easy handling, allowing technicians to concentrate on timing adjustment rather than improvised fixtures. For reliable ignition timing measurements and workshop integration, contact Metav Werkzeuge to request the Metav IndustryLine ignition timing setting kit (SKU M208.156) or for tailored technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M208.156 GTIN: 4054469105086 Customs tariff number: 90173000 Facts Weight: 0.3 kg Dial gauge diameter: 10 mm Extension lengths: 30 mm, 40 mm, 50 mm, 60 mm Thread adapters: M10x1; M18x1.5 Special features Fits common spark plug bores for cars and motorcycles Suitable for dial gauges with Ø8 mm mounting Supplied in protective aluminium case for transport Compact, lightweight workshop kit FAQ Which engines is the kit suitable for? The kit is designed for petrol engines where ignition timing is accessed via the spark-plug bore; the included adapters make it compatible with standard passenger car and motorcycle plug threads. Which dial gauges will fit the adapter? The adapters accept dial gauges with a Ø8 mm mounting spindle; the kit is intended for use with compact indicators that match this shaft diameter. What extension lengths are included? Four extensions are included: 30 mm, 40 mm, 50 mm and 60 mm, allowing adaptation to different plug recess depths and combustion-chamber geometries. Is the set supplied ready for workshop use? Yes. The complete kit is supplied in a protective aluminium case for transport and organised storage, making it convenient for bench or mobile workshop use. What is the kit’s weight and portability? The assembled kit is approximately 0.3 kg, designed to be lightweight and easy to carry between workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10×1 To M14×1.25 Thread Adapter External M14×1.25, Plastic Case - Metav IndustryLine
Take advantage of precise thread conversion, compact design and a secure engagement for reliable connections in measuring setups. Combine the M10 x 1 to M14 x 1.25 adapter with existing instrumentation for fast adaptation; order the adapter directly via Metav Werkzeuge or ask our consultants if needed. Adapter M10 x 1 to M14 x 1.25 — Thread conversion accessory (Metav IndustryLine) The Adapter M10 x 1 to M14 x 1.25 is a compact thread conversion accessory designed to join different metric thread standards on measuring instruments and test fixtures. Precision-machined thread interface Converts M10 x 1 to M14 x 1.25 Robust fit with reliable engagement Compact design, weight approx. 0.05 kg Precise thread conversion saves setup time and reduces adapter stock The thread adapter provides a straightforward solution where two metric thread standards must be joined quickly and repeatably. Engineered for a tight mechanical fit, the adapter uses a precision-machined interface to maintain concentricity and avoid play between components. Converting from M10 x 1 to M14 x 1.25 eliminates the need for bespoke fittings and reduces the variety of spare parts carried in the workshop, supporting more efficient inventory management and shorter equipment changeovers. Increased uptime through compact, dependable hardware A compact conversion fitting reduces handling complexity during service and inspection tasks. At approximately 0.05 kg, the adapter imposes negligible additional mass on test assemblies and does not significantly alter balance or alignment in delicate setups. The straightforward screw-in connection offers repeatable mechanical engagement, which in practice means fewer rechecks are required after assembly and less risk of measurement deviations caused by loose or mismatched threads. Suitable for workshop metrology and testing rigs This accessory is intended for use in measuring and test environments where reliable thread adaptation is necessary. Its simple form factor complements common measuring instruments and accessories in quality-control processes. The adapter is supplied as a single-piece thread conversion element that can be integrated into existing fixtures to extend compatibility with metric-threaded probes and connectors, helping to ensure a more flexible instrumentation toolbox. Contact Metav Werkzeuge for expert advice on integrating Metav IndustryLine adapters into your measurement setup or to request compatibility guidance for your instrumentation Technical Data Article number: M208.153 GTIN: 4054469105055 ECLASS: 28019190 Customs tariff number: 90178090 Weight: 0.05 kg Adapter thread: M10 x 1 mm → M14 x 1.25 mm Facts Weight: 0.05 kg Thread sizes: M10 x 1 mm, M14 x 1.25 mm Article number: M208.153 GTIN: 4054469105055 Special features Accessory for measuring instruments and test fixtures Precision-machined thread interface Compact, single-piece conversion element FAQ What thread sizes does the adapter accept and deliver? The adapter converts an internal/external M10 x 1 thread to an external M14 x 1.25 connection; the product is listed as Adapter M10 x 1 to M14 x 1.25 (Metav IndustryLine, M208.153). Is this adapter suitable for use with precision measuring instruments? Yes. The Adapter M10 x 1 to M14 x 1.25 is designed to provide a repeatable mechanical fit for measuring instruments and related fixtures where metric thread conversion is required. How much does the adapter weigh and does the mass affect instrument balance? The adapter weighs approximately 0.05 kg; this low mass normally has negligible impact on balance in most measuring and test assemblies. How should the adapter be installed to ensure reliable performance? Clean the mating threads, engage the adapter by hand to avoid cross-threading, and tighten until secure. Regular checks for thread wear or damage will help maintain reliable engagement. Can the adapter be used across different brands of instrumentation? The thread-based conversion is brand-agnostic where matching metric threads are present; compatibility depends on the corresponding M10 x 1 and M14 x 1.25 thread interfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M10×1 to M18×1.5 Thread Adapter External M18×1.5, in Case - Metav IndustryLine
Benefit from precise thread conversion between M10 × 1 and M18 × 1.5, a compact form factor of approximately 50 g and straightforward integration into existing measuring rigs; order the adapter directly via Metav Werkzeuge or consult our technical team for compatibility guidance. Adapter M 10 x 1 mm to M 18 x 1.5 mm — Thread adapter for measuring equipment (Metav IndustryLine) Adapter M 10 x 1 mm to M 18 x 1.5 mm is a purpose-built thread converter for workshop and metrology accessories, designed to bridge metric fine threads commonly encountered on sensors and setting tools Thread conversion M10 × 1 → M18 × 1.5 Lightweight design, approx. 50 g Suitable for measuring instruments and accessories Faster changeovers through exact thread matching The thread adapter converts an M10 × 1 connection to M18 × 1.5, enabling immediate use of different sensors, probes or timing tools without bespoke fittings. By avoiding improvised joins, the adapter reduces setup time and eliminates uncertainty in mechanical interfaces; this results in fewer interruptions during diagnostic or calibration tasks and supports consistent measurement results. The clean mechanical interface also minimises the risk of thread damage compared with repeated use of makeshift adaptors. Compact design that protects sensitive instruments With an approximate mass of 50 g, the converter keeps added inertia to a minimum, which is particularly important for delicate measuring heads and portable devices. The compact footprint preserves access in confined setups and facilitates single‑handed assembly in tight engine bays or test benches. The secure mechanical engagement ensures repeatable alignment and a firm seating that maintains signal path integrity where sensors rely on a stable mechanical reference. Traceability and workshop compatibility for smooth procurement The adapter is registered with GTIN: 4054469105062 and listed as SKU M208.154, aiding inventory control and ensuring unambiguous procurement. Its classification under measuring‑instrument accessories streamlines spare‑part management and reduces ordering errors. Metav’s presence in Emmerich provides a local quality filter and dependable supply for European workshops, supporting rapid delivery and consistent product standards for daily operations. For compatibility checks or to request procurement advice from Metav Werkzeuge in Emmerich, please contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm fitment with existing measuring equipment Technical data Article number: M208.154 GTIN: 4054469105062 Tariff number: 90178090 Numbers / Core technical data Weight: 0.05 kg ECLASS: 28019190 Compatibility / Special features Thread conversion: M10 × 1 to M18 × 1.5 Category: Measuring instruments, Accessories Category path: Measuring instruments > Accessories FAQ Which thread sizes does the adapter support? The adapter supports conversion from M10 × 1 to M18 × 1.5 and is supplied as the Adapter M 10 x 1 mm to M 18 x 1.5 mm (SKU M208.154). Is the adapter suitable for use with sensor probes and timing tools? Yes, the adapter is intended for use with measuring‑instrument accessories and sensor fittings; its mechanical interface preserves alignment for diagnostic and timing devices. How much does the adapter weigh and does that affect instrument handling? The adapter weighs approximately 50 g, a mass chosen to minimise additional inertia and to keep handling and dynamic behaviour of delicate measuring heads largely unaffected. Can the adapter be tracked in stock systems? Yes, the adapter is listed with GTIN 4054469105062 and SKU M208.154 to support unambiguous procurement and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x1.25 Timing Adjustment Tool For Dial Indicator With 8mm Shank, For Installation - Metav IndustryLine
Take advantage of the simple combination of a standard M12x1.25 thread and universal 8 mm shank compatibility for repeatable ignition timing set-ups; its compact, lightweight design keeps workshop routines efficient. Order the Ignition Timing Setting Tool directly via Metav Werkzeuge or ask our consultants if needed. Ignition Timing Setting Tool M12x1.25 for dial gauge (8 mm shank) — Metav IndustryLine The Ignition Timing Setting Tool M12x1.25 for dial gauge with 8 mm shank is a compact accessory for mounting dial gauges when checking and adjusting engine ignition timing, intended for workshop and service applications M12x1.25 thread for engine fittings Compatible with 8 mm dial gauge shanks Compact and lightweight design Suitable for precise dial gauge installation Secure, vibration‑resistant mounting for accurate timing readings A firm mechanical connection is essential when taking ignition timing measurements. The adapter provides a standard M12x1.25 thread that mates with common engine timing plugs and retaining holes, creating a stable mounting point for a dial gauge with an 8 mm shank. This stability reduces incidental movement and improves repeatability, so each reading reflects the true position rather than artefacts from loose fittings. For technicians who rely on consistent results, the adapter translates small gauge movements into reliable data, shortening diagnosis time and lowering rework rates. Workshop convenience that speeds up routine checks Designed for quick installation and removal, the attachment keeps workshop downtime to a minimum. Weighing only 0.05 kg, the unit is easy to handle during repetitive procedures and negates the need for improvised fixtures that can compromise accuracy. The simple mechanical design requires no special tools to fit a compatible dial gauge, which means measurement setup is faster and less error‑prone. The result is an efficient workflow for service bays and engine builders, where time and precision directly affect throughput. Broad compatibility and robust service performance Made as an accessory for measurement equipment, the adapter is compatible with all dial gauges with 8 mm mounting, enabling use with existing gauge inventories. Intended specifically for the installation of dial gauges, the component supports common metrology tasks encountered in engine maintenance and calibration. Its straightforward functionality integrates into established measurement procedures and complements precision instruments by providing a dependable mounting interface. For facilities seeking to maintain consistent measurement standards, this accessory is a practical addition to the toolkit. For dependable ignition timing measurements and workshop integration, request the Metav IndustryLine Ignition Timing Setting Tool from Metav Werkzeuge and benefit from expert guidance tailored to your application. Technical data Article number: M208.152 GTIN: 4061905043161 Manufacturer: Metav IndustryLine Facts Weight: 0.05 kg Thread: M12x1.25 Shank compatibility: 8 mm Special features For installing dial gauges Compatible with all dial gauges with 8 mm mounting Accessory for engine timing measurements FAQ What is the purpose of this adapter? The adapter is used to mount a dial gauge for ignition timing checks; the Metav IndustryLine Ignition Timing Setting Tool M12x1.25 provides a secure interface for precise measurements. Which dial gauges fit the adapter? Any dial gauge with an 8 mm shank will fit the adapter, making the tool compatible with standard workshop gauges. Does the thread match common engine fittings? Yes, the M12x1.25 thread is a standard size for many engine timing plugs and mounting points, enabling straightforward attachment. Is the adapter suitable for frequent workshop use? The lightweight, compact design is intended for routine service and diagnostic work, supporting repeated installation without unnecessary weight or bulk. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M12x1.25 Timing Pointer Set With Dial Gauge, Extensions 30–60mm, Aluminium Case - Metav IndustryLine
Take advantage of precise piston-position feedback, universal M12x1.25 thread compatibility and a set of 30–60 mm extensions to streamline ignition timing work; order the ignition timing setting kit directly via Metav Werkzeuge or ask our consultants if needed. Ignition timing setting kit M12x1.25 — dial gauge set with extensions and aluminium case by Metav IndustryLine The Ignition timing setting kit M12x1.25 is a compact workshop solution for determining the engine top dead centre (TDC) in vehicles, designed for use in common spark-plug bores of cars and motorcycles. Precise dial-gauge alignment for engine TDC Compatible with common spark-plug bores Thread M12x1.25 for direct cylinder fit Extensions 30–60 mm for varied depths Faster, more accurate engine timing The kit converts a simple dial reading into a reliable reference for piston position, so adjustments are based on measurable values rather than estimation. Fitting via the M12x1.25 thread allows direct installation into most spark-plug bores, while the compact dial gauge (dial face Ø10 mm) and compatibility with dial gauges that have an Ø8 mm stem mean a precise pointer movement is available in confined combustion chambers. The measurable feedback reduces repeat work and shortens engine setup time. Versatility for workshop and mobile repairs Extensions supplied in 30, 40, 50 and 60 mm lengths allow the tool to reach different combustion-chamber depths without improvised adapters, delivering consistent contact between gauge and piston crown. The light overall mass (approx. 0.3 kg) and the integrated aluminium case keep the set transportable and ready for both garage benches and field repairs. This versatility suits both car and motorcycle maintenance where quick, reproducible timing checks are required. Organised kit for reliable workflows The set includes a dial gauge and a holder interface tailored to the thread and stem dimensions, together with the set of extensions that permit incremental depth selection. The compact layout of the aluminium case keeps components protected and accessible, supporting an efficient workflow during multi-cylinder inspections. Traceable SKU and item data ensure easy stock handling and repeat ordering for service departments. Contact Metav Werkzeuge for tailored advice and secure supply of the M208.157 timing kit at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M208.157 GTIN: 4054469105093 ECLASS: 28019190 TARIC: 90173000 Manufacturer: Metav IndustryLine Facts Dial diameter: 10 mm Compatible stem: Ø8 mm Extensions: 30, 40, 50, 60 mm Thread: M12x1.25 Weight: 0.3 kg Special features Suitable for common spark-plug bores of cars and motorcycles Includes dial gauge and holder Aluminium case for organised transport and storage Extensions for varied cylinder depths FAQ How does the kit determine top dead centre (TDC)? The kit uses a dial gauge mounted through the M12x1.25 interface to register piston movement; by noting the dial deflection at the piston crown the exact TDC position can be found and recorded. Which engines and bores are compatible with this set? The set is designed for common spark-plug bores found in cars and motorcycles and fits directly via the M12x1.25 thread specified for the kit. What is included in the M208.157 kit? The M208.157 ignition timing setting kit includes a dial gauge, a holder compatible with Ø8 mm stems, extensions of 30, 40, 50 and 60 mm, and an aluminium case. Can other dial gauges be used with the kit? Yes; the kit is compatible with dial gauges that have an Ø8 mm stem, enabling workshop gauges to be used where required. Is the kit suitable for mobile service work? At approximately 0.3 kg and supplied in an aluminium case, the kit is compact and well suited for mobile or bench-based timing tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M14x1.25 Timing Setting Kit With Dial Gauge, Extensions 30–60mm, Aluminium Case - Metav IndustryLine
Take advantage of precise ignition timing with the combination of an M14x1.25 spark‑plug thread adapter and adjustable 30–60 mm extensions, compatible with common Ø8 mm stem dial gauges; order the kit directly via Metav Werkzeuge or ask our consultants for application advice. Ignition timing setting kit M14x1.25 mm with dial gauge and extensions — Metav IndustryLine The Ignition timing setting kit M14x1.25 mm with dial gauge and extensions is a compact workshop solution designed for locating the piston top dead centre and accurate ignition timing on cars and motorcycles Fits M14x1.25 spark plug threads Includes 30, 40, 50 and 60 mm extensions Compatible with Ø8 mm dial gauge stem Aluminium case for secure transport Precise timing where it matters The kit places precision at the centre of ignition adjustment: the supplied adapters and the compatibility with Ø8 mm stem dial gauges allow direct transmission of piston movement to the indicator. With a 10 mm dial diameter and secure adaptor seating, small piston displacements are shown clearly on the gauge, enabling repeatable detection of the piston top dead centre (TDC). This accuracy helps to reduce ignition timing errors that can cause poor running, increased emissions or premature wear, so workshop processes become more efficient and traceable. Adaptability across engines and bores Versatility is achieved through the combination of thread adapters and a set of four extensions (30, 40, 50 and 60 mm). The dual‑thread compatibility (M10x1 and M14x1.25) extends the tool’s reach into a wide range of cylinder heads and spark‑plug recess depths, making the kit suitable for both passenger cars and motorcycles. The measured design and light overall weight (approx. 0.3 kg) simplify handling during single‑person operation while the aluminium case keeps components organised for rapid deployment between jobs. Workshop benefits and reliable workflow In practical terms, the accessory set shortens set‑up time and reduces error sources: adapters ensure a positive mechanical fit, extensions offer the required reach without modifying the engine, and the dial‑gauge interface provides a direct, visual measurement of piston travel. For maintenance routines and engine rebuilds where consistent ignition advance is critical, the kit supports a faster, more confident workflow. Sourcing from Metav IndustryLine also means access to a broad product range and a dependable supplier network that supports ongoing workshop requirements. For tailored advice on whether the Metav IndustryLine ignition timing kit M208.158 suits a specific engine application, contact Metav Werkzeuge by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com to discuss technical fitment and availability Technical Data Article number: M208.158 GTIN: 4054469105109 eCl@ss: 28019190 Weight: 0.3 kg Dial diameter: 10 mm Core technical data Extensions: 30 mm, 40 mm, 50 mm, 60 mm Thread adapters: M10x1 / M14x1.25 Tariff number: 90173000 Dial stem requirement: Ø8 mm Special features Compatible with common spark plug threads in cars and motorcycles Aluminium case Suitable for ignition timing and finding TDC Category: dial gauges FAQ Which spark plug thread sizes are supported by the kit? The kit supports M14x1.25 and includes an M10x1 adapter for broader compatibility; these options are integrated into the Metav IndustryLine ignition timing set. Which dial gauges are compatible with the tool? Compatible dial gauges require an Ø8 mm stem; the kit is designed to interface with such indicators and a dial diameter of 10 mm. What extension lengths are supplied? Extensions supplied are 30 mm, 40 mm, 50 mm and 60 mm, allowing adaptable reach for different cylinder depths. Is a transport case included? Yes, the set is supplied with an aluminium case to keep adapters and extensions organised and protected. What are the SKU and GTIN for ordering and inventory? SKU: M208.158; GTIN: 4054469105109 — both reference the Metav IndustryLine ignition timing setting kit Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2.5 Threaded Side Tip Gauge Insert Steel, For Dial Indicators - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of a compact, threaded side contact probe that combines compatibility with standard dial gauges and robust steel construction for reliable workshop inspection. Order directly via Metav Werkzeuge or consult the Metav team for application advice. Measuring Insert, Side Point M2.5, Steel — threaded side probe for dial gauges (Käfer) The Measuring Insert, Side Point M2.5, Steel is a threaded side-contact probe intended for dial gauges, providing precise lateral contact for comparative measurements and routine workshop inspection. Side contact tip for dial indicators Threaded M2.5 connection Steel construction for workshop use Precision where lateral contact is required The Measuring Insert, Side Point M2.5, Steel delivers repeatable lateral contact for dial gauge measurement setups, making small positional differences measurable with confidence. The M2.5 thread secures the probe to standard gauge stems, reducing play that can degrade readings. In practical terms, a well‑fitted side tip converts small deflections into reliable indicator movement, supporting consistent tolerances in assembly and inspection processes. Secure mounting for consistent results A threaded connection simplifies installation and replacement: the M2.5 interface provides a mechanical fit that resists loosening under routine handling. The lateral tip design enables measurements on edges and narrow features where axial probes cannot reach, and the insert format allows it to be used with a wide range of dial gauges. For users less familiar with gauge accessories, a side point is a compact alternative to more complex fixtures and offers immediate improvement in accessibility and measurement repeatability. Built for everyday workshop use Made from steel, this side probe is suited to regular inspection tasks in production and maintenance environments where robustness matters. Solid material choice ensures dimensional stability under normal use and eases handling during frequent gauge changes. For longer service life, regular inspection of the contact geometry is recommended; a worn tip can be replaced quickly thanks to the threaded design, keeping downtime to a minimum while maintaining measurement quality. For procurement or technical advice on Käfer measuring components such as this side point, contact Metav Werkzeuge for ordering and guidance — Metav’s specialists can confirm compatibility with specific dial gauges and application requirements. Technical Data Article number: 4000851643NW Label: Messeins.seitliche Spitze M2,5 STA z.Messuhren KÄFER Product type: Measuring insert Material: Steel Form: Side point Packaging unit: 1 UID: 4000851643NW Facts Thread: M2.5 Packaging unit: 1 Special features For use with dial gauges (dial indicators) Side contact geometry for lateral measurements Threaded attachment for secure fitting FAQ How does the side point attach to a dial gauge? The side point attaches via its M2.5 threaded shank, which screws into compatible gauge stems; the secure thread minimises movement during measurement and ensures stable readings for the Measuring Insert, Side Point M2.5, Steel (SKU 4000851643NW). Can this insert be used on small edges and complex workpieces? Yes, the lateral tip geometry is specifically designed for edge and flank measurements, allowing a dial gauge to access narrow or recessed features that are difficult to reach with axial probes. What material is the probe made from and what does that mean for durability? The probe is manufactured from steel, offering good resistance to wear under normal inspection tasks; however, contact surfaces should be checked periodically and replaced when wear affects measurement accuracy. Is the thread size standard for most dial gauges? The M2.5 thread is a common size for many small indicator accessories; compatibility should be verified against the gauge’s stem thread specification before use. How is repeatability ensured when using this insert? Repeatability is supported by the precise thread fit and the rigid side contact design, which together reduce unintended movement and allow consistent transfer of small displacements to the indicator needle. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
M2.5 Threaded Wedge Tip Gauge Insert For Dial Indicator - Metav IndustryLine
Taking advantage of a defined wedge tip and secure thread M2.5 connection ensures repeatable contact and reliable readings in routine inspection tasks; the compact design and light weight facilitate quick attachment to compatible dial indicators for an uninterrupted workflow. Order the product directly via Metav Werkzeuge or ask the consultants for further specification guidance. M208.170 measuring contact for dial gauge — wedge tip, thread M2.5 (Metav IndustryLine) M208.170 is a measuring contact for dial gauges, designed to provide a defined contact point for precise comparative and workshop measurements with a standard M2.5 threaded connection Threaded M2.5 connection for quick fitting Wedge tip for defined, repeatable contact Compatible with dial gauges having M2.5 thread Compact, lightweight design for easy handling Consistent contact geometry for accurate repeatability The wedge-point design delivers a single, well-defined contact geometry that minimises variation at the interface between gauge and workpiece. By providing a positive contact point, the accessory reduces ambiguity in contact positioning and improves repeatability across successive measurements. This stability supports faster decision-making in quality checks and reduces rework caused by inconsistent probe orientation, making it a practical addition to production and inspection benches. Reliable integration with common dial indicators Engineered for use with dial gauges that accept an M2.5 connecting thread, the component offers straightforward mechanical compatibility and fast installation. The thread M2.5 is a widely used standard in metrology accessories, so the contact tip fits readily into existing gauge setups without the need for adapters. Compatibility with standard fittings simplifies tool inventories and shortens changeover times, contributing to more efficient measurement routines in both workshop and lab environments. Compact design that supports ergonomic handling With a compact form and low mass, the contact tip keeps the gauge assembly balanced and easy to manoeuvre when measuring small features or intricate profiles. The reduced weight lowers inertial effects during fine adjustments and helps maintain a steady measurement posture, which is particularly valuable in repetitive inspection tasks. As a small but decisive accessory, it enhances the practical usability of a dial indicator without adding unnecessary bulk. For stable, repeatable gauge set-ups, request the Metav IndustryLine M208.170 measuring contact from Metav Werkzeuge — contact the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for precise product matching and procurement advice Technical data SKU: M208.170 GTIN: 4054469105215 Manufacturer: Metav IndustryLine Weight: 0.1 kg Tariff number: 90319000 Core data Thread: M2.5 ECLASS: 21170324 Category: Accessory for measuring instruments Label: Measuring contact, wedge tip, thread 2.5 mm Special features Wedge tip for defined contact Suitable for dial gauges with M2.5 connecting thread Compact and lightweight construction Accessory type: measuring contact for dial indicators FAQ What gauges are compatible with this contact tip? The M208.170 measuring contact is compatible with dial gauges that have a connecting thread of M2.5 and is intended as a direct accessory for such indicators. What benefit does a wedge tip provide compared with a spherical contact? A wedge tip yields a clearly defined contact line or point that improves positional consistency during comparative measurements, supporting better repeatability than more rounded contacts in certain inspection tasks. Is any special tool required to fit the contact? Fitting is achieved by engaging the standard M2.5 thread of the dial gauge; no specialised tool is required beyond the usual gauge-handling implements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
± 0.1 mm Dial Test Indicator 0.002 mm Resolution, 14.5 mm Probe Length, 40.5 mm Anvil Diameter - Mahr GmbH HELIOS-PREISSER
Take advantage of precise displacement measurement with the combination of ±0.1 mm measuring range, micro-fine 0.002 mm reading and practical probe geometry for confined spaces; order the instrument directly via Metav Werkzeuge or ask our consultants for tailored advice. Helios-Preisser lever-type test indicator — ±0.1 mm range, 0.002 mm reading Helios-Preisser lever-type test indicator for precision comparative measurements and setup tasks in workshops and inspection benches Precise 0.002 mm reading Wide ±0.1 mm measuring range Long 14.5 mm probe for extended reach 40.5 mm outer contact ring diameter Accuracy that supports repeatable decisions The lever-type test indicator provides a resolution of 0.002 mm, equivalent to 2 micrometres, which enables reliable detection of very small displacements during setup and inspection tasks. The ±0.1 mm measuring range permits both fine adjustments and immediate comparative checks without changing instruments. The dial layout with dial numbering 0-100-0 offers clear visual feedback for fast interpretation. For technicians and inspectors, this combination of range and reading reduces measurement uncertainty and accelerates alignment and go/no-go assessments. Geometry designed for reach and stable contact A 14.5 mm probe length together with a 40.5 mm outer contact ring balances access to narrow features and stable bearing on curved or flat surfaces. The measuring insert length is optimised for entering tight grooves and holding a repeatable contact point while the larger contact ring distributes pressure and improves repeatability in comparative measurements. These dimensional choices minimise the need for multiple setups and help preserve surface integrity when probing delicate parts. Practical workflow benefits and supply assurance As part of a metrology kit, this lever-type indicator integrates into setup routines, incoming inspection and machine tool alignment with immediate, comparable readouts that aid decision-making and traceable process control. The Helios-Preisser instrument is supplied as a single unit (packaging unit 1) with the proven provenance of a specialist metrology brand. Metav stands for democratisation of precision: decades of expertise, a broad product range and reliable supply from Emmerich ensure rapid availability and consistent quality for workshops and industry. If further technical details or confirmation of suitability are required, technical advice is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Contact Metav Werkzeuge for a tailored quotation and technical guidance on the Helios-Preisser lever-type test indicator (SKU 4000851602NW) to ensure the instrument fits the inspection routine Technical Data Article number: 4000851602NW SKU: 4000851602NW Product type: Lever-type test indicator Brand: Mahr GmbH Helios-Preisser Packaging unit: 1 Facts Measuring range: ±0.1 mm Resolution / reading: 0.002 mm Probe / measuring insert length: 14.5 mm Outer contact ring diameter: 40.5 mm Dial numbering: 0-100-0 Special features Length of measuring inserts 14.5 mm Outer ring Ø 40.5 mm Dial numbering 0-100-0 FAQ Is the instrument suitable for alignment and comparative checks on small parts? Yes. The Helios-Preisser lever-type test indicator (SKU 4000851602NW) is designed for comparative measurements and alignment work thanks to its ±0.1 mm range and 0.002 mm resolution. How is the reading interpreted on the dial with 0-100-0 numbering? The dial numbering 0-100-0 provides a continuous visual scale for displacement; the Helios-Preisser instrument converts fine lever movement into readable graduations so small deviations can be followed directly on the dial. Can the probe access narrow grooves and recessed features? The 14.5 mm probe length increases access to confined features while the 40.5 mm outer contact ring maintains stable contact for repeatable comparative measurements with the Helios-Preisser indicator. Is this instrument intended for laboratory or shop-floor use? The lever-type test indicator is suitable for both controlled inspection benches and practical workshop environments where precise comparative measurements and setup checks are required. What should be checked before integrating this indicator into an inspection routine? Confirm that the ±0.1 mm range and 0.002 mm resolution match the measurement tolerances of parts to be inspected; the Helios-Preisser lever-type test indicator (SKU 4000851602NW) is ideal where micrometre-level sensitivity is needed. Manufacturer / Responsible: Mahr GmbH Helios-Preisser Vertrieb; Ölbergstraße 19; 72501 Gammertingen; Germany; +49 7574 400-60
±0.4mm Dial Testing Indicator 14.5mm Probe Length 0.01mm Resolution 30mm Outer Ring - Mahr GmbH HELIOS-PREISSER
Take advantage of a compact lever test indicator that combines 0.01 mm resolution with a ±0.4 mm measuring range and a 30 mm dial for clear comparative readings; order directly via Metav Werkzeuge or consult our specialists for application advice and fast supply from Emmerich. Helios-Preisser Lever Test Indicator – 0.01 mm graduation, ±0.4 mm range The Helios-Preisser lever test indicator is a compact comparative measuring instrument designed for workshop and shop-floor inspection tasks where fine resolution and repeatable readings are required. High-precision 0.01 mm resolution ±0.4 mm measuring range 14.5 mm measuring contact length 30 mm dial with 0-40-0 numbering Confident, repeatable comparative measurement for quality control This lever-type test instrument provides a 0.01 mm graduation across a working range of ±0.4 mm, enabling precise detection of small deviations in workpieces and tooling setups. The fine graduation makes it suitable for routine comparative measurements, runout checks and fine alignment tasks where absolute values are less critical than reproducible differences. Because the instrument is a lever test indicator, the sensing geometry translates small lateral displacements into readable dial movements, ensuring consistent results when used according to standard comparative measuring techniques. Clear dial and practical contact design for fast readings A compact 30 mm dial with a 0‑40‑0 numbering scheme provides quick visual interpretation in constrained spaces. The measuring contact, with a length of 14.5 mm, offers reach and access for a variety of workpiece profiles while maintaining stability at the contact point. The small-diameter dial and short contact stem reduce parallax and make it easier to spot trends in measurements at a glance, which speeds up inspection cycles and supports efficient decision-making on the shop floor. Compliant construction and traceable workmanship for shop use Constructed in accordance with DIN 2270, the instrument is built to recognised metrological standards for dial-type indicators. Compliance with the standard supports consistent interchangeability and predictable behaviour during comparative checks. This makes the instrument a reliable choice where traceability and repeatability are required for incoming inspection, fixture set-up or final checks before assembly, helping to reduce rework and maintain process stability. Easy integration into inspection routines and interpretation explained The lever indicator is straightforward to integrate into bench measurement arrangements and portable inspection kits. The 0.01 mm graduation should be read as the smallest visible increment; for cumulative assessments, users compare deviations from a zeroed reference point rather than relying on absolute single-point accuracy. The compact mechanism suits close-quarter measurement where dial indicators with radial probes cannot be used, offering a practical balance between sensitivity and robustness for everyday workshop tasks. Contact Metav Werkzeuge today for tailored advice on integrating the Helios-Preisser lever test indicator into measuring routines and prompt delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number (SKU): 4000851600NW UID: 4000851600NW Product type: Lever test indicator Manufacturer: Mahr GmbH Helios-Preisser Vertrieb Packaging unit: 1 Facts Measuring range: ±0.4 mm Resolution / graduation: 0.01 mm Dial outer diameter: 30 mm Measuring contact length: 14.5 mm Dial numbering: 0‑40‑0 Special features Complies with DIN 2270 Compact 30 mm dial for space-limited use Short measuring contact for improved stability Designed for comparative and runout checks FAQ What is the smallest readable increment on this lever indicator? The instrument offers a 0.01 mm graduation; readings are taken against a zero reference for comparative assessment using the Helios-Preisser lever test indicator. Which measuring range does the indicator cover? The working range is ±0.4 mm, suitable for fine deviations and runout detection within that span. Is the dial numbering compatible with workshop standards? Yes, the dial shows a 0‑40‑0 numbering scheme on a 30 mm outer diameter dial, which supports quick, repeatable readings in compact setups. Can this device be used for routine runout checks on shafts and spindles? The lever geometry and 14.5 mm measuring contact length make it well suited for runout and comparative measurements in many workshop scenarios. Does the product conform to any standards? The instrument is manufactured in compliance with DIN 2270, ensuring consistent mechanical and metrological characteristics. Manufacturer / Responsible: Mahr GmbH Helios-Preisser Vertrieb; Ölbergstraße 19; 72501 Gammertingen; Germany; +49 7574 400-60
±0.5 mm Digital Test Probe With 2 mm Carbide Ball Tip, 0.001 mm Resolution, Rotatable Display, Supplied In Case - Metav IndustryLine
Take advantage of the combination of ultra-fine resolution, a compact carbide probe tip and a rotatable digital display for reliable, repeatable small-range measurements; the device arrives ready for workshop use in a transport case. Order the Digital Fine Probe directly via Metav Werkzeuge or ask our consultants if needed. Digital Fine Probe M208.003.1 — compact digital probe with 0.001 mm resolution (Metav IndustryLine) The Digital Fine Probe M208.003.1 is a compact digital displacement probe intended for high-resolution comparative measurements and setup tasks in inspection and workshop environments 0.001 mm resolution readout ±0.5 mm measuring range Carbide ball probe Ø2 mm Rotatable digital display with run bar Exceptional metrological performance for small-range inspections The finely tuned measurement chain delivers a resolution of 0.001 mm combined with a specified accuracy of 0.02 mm, making the instrument suitable for precision checking of small features and positional adjustments. The limited measuring range of ±0.5 mm is deliberately matched to tasks where short-travel, low‑compliance sensing gives the best reproducibility; this translates directly into faster setup checks and fewer reworks on production or inspection benches. The data‑centred design emphasises measurable benefits: consistent repeatability and clear numerical evidence for quality control decisions. Fast, intuitive operation to reduce cycle time Operation is simplified by a rotatable digital display with MODE, SET and DATA keys and a visual run bar, allowing readings to be oriented to the operator and logged when required. Multiple measurement modes (standard, maximum, minimum and difference) provide immediate analytical value without additional calculation steps, and the automatic reversal of measuring direction prevents misreads when the probe motion changes. The probe head is equipped with a carbide ball of Ø2 mm for reliable contact with small radii and delicate surfaces, enabling precise point contact with minimal marking and excellent wear resistance. Robust packaging and workshop applicability With a compact probe length of 15 mm and a construction optimised for repeated tactile use, the instrument integrates well into bench fixtures and test rigs while remaining easy to handle during manual checks. Delivery includes a secure transport case for safe handling between job sites and storage, which preserves instrument alignment during transit. Supplied by Metav Werkzeuge, the unit is aimed at workshops and inspection labs seeking high-resolution diagnostic capability without complex integration—an accessible precision tool that supports efficient quality workflows. For workshop-ready high-resolution checks, request the Digital Fine Probe M208.003.1 from Metav Werkzeuge and discuss system suitability with our consultants via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M208.003.1 GTIN: 4061905053573 Eclass: 21170333 Label: Digital fine probe, ±0.5 mm, 0.001 mm reading Facts Measuring range: ±0.5 mm Resolution: 0.001 mm Accuracy: 0.02 mm Length: 15 mm Digital: yes Special features Digital display with MODE, SET and DATA keys and run bar, freely rotatable Probe tip fitted with carbide ball Ø2 mm Measurement modes: standard, maximum, minimum, difference Automatic reversal of measuring direction Supplied in a transport case FAQ What is the smallest increment the probe will show? The display on the Digital Fine Probe M208.003.1 indicates increments of 0.001 mm, suitable for fine comparative measurements. Which measurement modes are available on the instrument? The unit supports standard, maximum, minimum and difference modes, enabling immediate on‑screen comparison without external calculation for the M208.003.1. Is the probe tip suitable for small radii and delicate surfaces? Yes — the probe is supplied with a carbide ball probe of Ø2 mm, providing reliable point contact with good wear resistance for small features. Can the readout be oriented for different working positions? The rotatable digital display with MODE/SET/DATA keys and a run bar allows the readout to be turned for ergonomic viewing and convenient logging. Does the delivery include protective packaging for transport? The instrument is supplied in a secure transport case to protect alignment during handling and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
±0.9 mm Comparator Ø56 mm Dial Rotatable Outer Ring 0.01 mm Resolution Factory Standard, Metal Case - Metav IndustryLine
Take advantage of precise comparative measurement with a compact, workshop‑ready instrument: the combination of a ±0.9 mm measuring range, a 0.01 mm graduation, and a rotatable bezel supports fast setup and repeatable checks on jigs, fixtures and production parts. Order the gauge directly via Metav Werkzeuge or consult the specialists for application advice. M208.042 Dial Comparator (Ø56 mm) by Metav IndustryLine — ±0.9 mm, 0.01 mm graduation The M208.042 is a compact dial comparator designed for comparative inspection and run‑out checks in machining and quality control environments, offering a Ø56 mm rotatable dial and workshop‑grade performance. ±0.9 mm measuring range, 0.01 mm graduation 56 mm rotatable dial bezel for quick alignment Robust metal housing, lightweight 0.192 kg Reliable small‑range measurement for rapid quality checks The instrument delivers a ±0.9 mm measuring range with a clear 0.01 mm graduation, making it well suited to short‑stroke comparative tasks such as roundness checks, run‑out inspection and fine adjustment of fixtures. The fine graduation allows standard workshop verification with immediate visual feedback, reducing setup time and enabling quicker decision‑making on the shop floor. Using a dial comparator in this range shortens inspection loops and supports consistent process control. Durable design tailored to workshop handling A metal housing shields the movement from shocks and contamination while keeping the overall weight to just 0.192 kg, so the gauge remains easy to handle during repetitive checks. The 56 mm rotatable bezel permits rapid dial alignment without changing the measuring position, simplifying readings in confined setups. The instrument is built to a workshop standard, combining practical robustness with the clarity required for everyday inspection tasks. Practical mounting and integration with inspection rigs The comparator accepts a standard Ø8 mm stem mount, making it compatible with most magnetic bases and test stands used in production and maintenance. Its compact dial and proven mechanics support straightforward integration into measurement fixtures, where the instrument serves as a reliable visual amplifier of small displacements. The product is identified as a dial comparator suitable for comparative and control measurements in machine shops and inspection benches. For application support or to request a specification confirmation for the M208.042, contact Metav Werkzeuge — our Emmerich specialists provide tailored advice and order processing for workshop and industrial customers. Technical data Article number: M208.042 GTIN: 4054469104041 Customs tariff number: 90178090 Facts Measuring range: ±0.9 mm Graduation / resolution: 0.01 mm Display reading: 0.01 mm Weight: 0.192 kg Stem mount: Ø8 mm Dial diameter: 56 mm Applicable standard: workshop standard Special features Metal housing Rotatable dial via outer bezel Ø56 mm Compact design for bench and fixture use Category: dial gauges FAQ What measurement tasks is this comparator best suited for? The M208.042 dial comparator is intended for short‑stroke comparative measurements such as run‑out checks, fixture setting and small component inspection in machine‑shop and quality‑control applications. What level of reading resolution and repeatability does it provide? The instrument offers a 0.01 mm graduation, giving clear, repeatable visual readings suitable for standard workshop quality control and quick inspection tasks. How is the comparator mounted for shop use? The comparator accepts a Ø8 mm stem mount, compatible with common magnetic bases and test stands, allowing easy installation on benches and fixtures. Does the M208.042 include a protective housing and easy dial alignment? Yes. A metal housing protects the mechanism and the 56 mm rotatable bezel enables quick dial orientation without moving the measuring point. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
±2 mm Inductive Contact Probe With Linear Ball Bearing Guide, 0.7V 13kHz, Includes 2m Cable - Metav IndustryLine
The combination of inductive differential sensing and a linear ball‑bearing guide delivers repeatable, low‑force displacement measurement for inspection and setup tasks; benefit from the compact ±2 mm range and included 2 m connection cable for straightforward integration. Order the probe directly via Metav Werkzeuge or consult our specialists for system compatibility. Messtaster M301.041 — Inductive measuring probe with linear ball‑bearing guide (Metav IndustryLine) A Messtaster M301.041 is an inductive measuring probe designed for fine displacement sensing in workshop inspection, gauging fixtures and machine setup tasks, offering a compact ±2 mm sensing range and low measuring force for minimal part loading. Inductive differential sensing for stable output Linear ball‑bearing guide for high repeatability ±2 mm measurement range for fine displacement control Includes 2 m cable with 5‑pin DIN connector Precise, reliable sensing for repeatable inspection results The probe uses an inductive differential principle to convert minute axial movements into a stable electrical signal, making it well suited to applications where consistent repeatability is required. The design reduces susceptibility to mechanical backlash and contact wear, while the specified accuracy (0.2+3L³ µm) provides a predictable basis for traceable measurements. As a rational choice for quality assurance loops, this sensing method supports automated comparison, tool setting and component inspection where numerical stability is vital. Smooth mechanics and low part disturbance for delicate tasks Mounted with a linear ball‑bearing guide, the mechanism ensures friction‑free stroke motion and reproducible deflection paths, which is particularly important when working with small or delicate components. The measuring force <0.633 N minimises deflection of thin or lightweight parts during contact checks, preserving dimensional integrity while enabling reliable readings. The compact ±2 mm range keeps the active sensing region tight, so transitions between measured positions remain consistent and easy to interpret during routine checks. Integration-ready electrical interface and practical accessories Electrical requirements are modest, with a supply characteristic of 0.7 V, 13 kHz, and the probe is supplied with a 2 m connection cable and 5‑pin DIN plug, allowing quick wiring into common indicator amplifiers and data acquisition systems. The included cable reduces installation time and ensures a clean connection for signal transmission, supporting both manual readout and automated measurement chains. Where fixture mounting is needed, the probe’s design and mounting provisions facilitate stable attachment and repeatable positioning in inspection jigs. Contact Metav Werkzeuge for tailored integration advice on the M301.041 measuring probe and to discuss compatibility with existing test stands or measurement amplifiers Technical data Article number: M301.041 GTIN: 4054469113630 EClass: 27144044 ETIM: EC000029 TARIC/HS code: 90173000 Brand: Metav IndustryLine Core specifications Measurement range: ±2 mm Measuring force: <0.633 N Supply: 0.7 V, 13 kHz Accuracy: 0.2+3L³ µm (L in mm) Mounting / Aufnahme: 8 Special features Inductive differential sensing principle Linear ball‑bearing guide 2 m connection cable with 5‑pin DIN plug Compact design for fixture and machine integration FAQ What measurement range does the probe cover? The M301.041 measuring probe provides a sensing range of ±2 mm, suitable for fine displacement and comparative checks. Is the probe suitable for automated gauging systems? Yes. The inductive differential output and the supplied 2 m cable with 5‑pin DIN make the probe compatible with common indicator amplifiers and data acquisition interfaces for automated gauging. How does the low measuring force affect parts under test? With a measuring force below 0.633 N, the probe minimises loading on thin or delicate components, reducing the risk of elastic deformation during measurement. Can the probe be mounted in custom fixtures? The device is designed for stable fixture mounting; the mechanical guide and compact body allow repeatable placement in inspection jigs and machine set‑ups. What accuracy can be expected in practice? The specified accuracy is given as 0.2+3L³ µm (L in mm); this provides a predictable tolerance framework for integrating the probe into quality workflows and for estimating measurement uncertainty. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
±2mm Indicating Dial Unit With Analog And Digital Display, Auto Range Swap 0.0001mm Resolution - Metav IndustryLine
Take advantage of the combination of a hybrid analogue-and-digital readout, automatic measurement-range reversal, and flexible power options for reliable indicator readings in workshop and laboratory setups; order the device via Metav Werkzeuge or consult our advisers for application guidance. M301.060 Indicator unit — Analogue & digital readout with automatic range reversal (Metav IndustryLine) The M301.060 is an indicator unit for inductive probes that combines analogue trend display with precise digital measurement for comparative and position-control tasks in industrial metrology. Analogue and digital readout Automatic measurement-range reversal Resolution 0.0001 mm Battery or external power supply Fast decisions through hybrid readout The hybrid analogue and digital display delivers the best of both worlds: the dial-like analogue trace allows immediate recognition of trends and deviations, while the digital readout provides exact values for documentation. With a display resolution of 0.0001 mm, repeatable readings are straightforward and inspection protocols are easier to fulfil. This combination reduces interpretation time during set-up and series checks, making routine comparator and probe‑based measurements more efficient and less error‑prone. Continuous measurement and robust signal handling Automatic measurement‑range reversal maintains continuous indication when the probe passes zero or crosses measurement limits, eliminating manual range changes and minimising interruption during runs. The device supports a measurement range of ±2 mm and features a sensitivity of 0.7 V/V/mm, ensuring a stable output from standard inductive sensors. Power is provided by 3× LR06 batteries or via an external supply; the unit operates with an excitation frequency in the range of 13 kHz, supporting consistent signal energy for reliable probe excitation. Workshop-ready compatibility and practical benefits Designed for integration with inductive messtaster systems, this display unit is also specified as suitable for third‑party calipers of similar construction (for example, TESA types), which simplifies retrofits and replacements in existing test rigs. The compact design and clear indication make it appropriate for both bench inspection and fixture‑mounted measurement tasks. For users seeking dependable comparative measurement and straightforward installation, the device supports faster set-ups and reduces cycle times in quality control workflows. Contact Metav Werkzeuge in Emmerich for application advice, calibration options and to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M301.060 GTIN: 4054469113647 ECLASS: 21170401 Category: Messuhren Manufacturer: Metav IndustryLine Facts Measurement range: ±2 mm Resolution (display): 0.0001 mm Sensitivity: 0.7 V/V/mm Excitation: 13 kHz Power: 3× LR06 or external supply Tariff code: 90173000 Special features Analogue and digital indication Automatic measurement-range reversal Compatible with inductive probes Suitable for third‑party calipers of the same design FAQ What is the measurement range and resolution of this indicator unit? The indicator unit offers a measurement range of ±2 mm with a display resolution of 0.0001 mm, suitable for fine comparative and position measurements. Can this device power from mains or only batteries? The device runs on 3× LR06 batteries or via an external power supply, allowing flexible use in bench or fixed applications. Is the display compatible with probes from other manufacturers? Yes, the unit is specified as suitable for inductive probes and can be used with third‑party calipers of a similar construction (for example, TESA types). What advantage does the analogue indication provide alongside the digital readout? The analogue trace gives immediate visual feedback on trends and deviations, while the digital readout supplies precise numerical values for documentation and decision‑making. Does the unit support continuous measurement across zero or range limits? Yes, automatic measurement‑range reversal ensures continuous indication when the probe crosses the zero point or measurement limits. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø 4.5 mm Extension For Dial Indicators M2.5 Thread 15 mm, Stainless Steel - Metav IndustryLine
The compact stainless‑steel extension combines a short 15 mm reach with an M2.5 threaded connection and a Ø 4.5 mm shank to access recessed measuring points with minimal impact on measurement repeatability — order the extension directly via Metav Werkzeuge or consult our specialists for application advice. Extension for dial indicators M208.063.A – 15 mm, M2.5 thread (stainless steel) Extension for dial indicators M208.063.A is a compact accessory designed to extend the reach of dial and test indicators for confined or recessed measurement positions, maintaining workshop robustness and simple interchangeability Compact 15 mm stainless‑steel extension M2.5 threaded connection for dial indicators Ø 4.5 mm shank for secure fit Suitable for recessed measuring points Reliable reach into confined measuring points The 15 mm extension offers a short, controlled increase in reach that is effective when standard probe lengths cannot access a feature. With the M2.5 threaded connection and Ø 4.5 mm shank, the accessory is designed to mate with common dial and test indicators while keeping additional lever‑arm effects low; this helps preserve precision for routine checks and spot measurements. The compact geometry reduces the risk of bending or lateral play compared with longer adaptors, so measurement repeatability is supported in tight assemblies. Robust stainless‑steel construction for everyday workshop use Manufactured from stainless steel, the extension resists corrosion and tolerates the handling demands of a busy metrology bench. The material choice delivers long service life and straightforward cleaning after use, which supports consistent measurement conditions and reduces downtime. Built for reliability rather than complexity, this simple metal extender gives a dependable mechanical interface between indicator and workpiece, promoting confidence in repetitive inspection tasks. Compatibility and practical handling for daily metrology Threaded to the M2.5 metric standard, the extension fits a wide range of dial indicators and test probes used in mechanical workshops and small series inspection. The Ø 4.5 mm shank provides a positive seating to prevent slippage when mounted, while the short length minimises added mass and inertia — a practical advantage for fast inspection cycles. For specialised setups or unusual indicator models, Metav’s specification data can be consulted to verify fit; the straightforward design makes replacement or stocking easy for quality departments. Contact Metav Werkzeuge for ordering, application advice or to source compatible indicator models — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M208.063.A GTIN: 4054469104256 ETIM: EC002219 ECLASS: 21170613 Customs tariff no.: 90179000 Dimensions & core data Length: 15 mm Thread: M2.5 Shank diameter: Ø 4.5 mm Materials & features Material: stainless steel Category: Measuring instruments > Accessories Application: accessory for dial indicators FAQ Is this extension compatible with standard dial indicators? The extension is designed with an M2.5 thread and a Ø 4.5 mm shank to match common dial and test indicators; check the indicator thread specification to confirm compatibility with M208.063.A. Will the extension affect measurement accuracy? Because of the short 15 mm length and robust stainless‑steel construction, the influence on measurement repeatability is minimal compared with longer adaptors, making it suitable for spot checks and confined features. What environments is the extension suitable for? Made from stainless steel, the accessory is suitable for workshop and general industrial environments where corrosion resistance and routine handling are required. How is the extension mounted to an indicator? The part screws directly into an indicator or probe with an M2.5 internal thread; ensure the connection is snug and free of debris before use. Does the technical data specify a calibration or certificate? The product data does not list a calibration certificate for this accessory; calibration is typically not applicable to passive extensions, but verification can be arranged if required for a specific inspection workflow. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precise measurements with dial indicators for workshop and production use
Dial indicators are high-quality measuring devices designed for a variety of measuring ranges and fine-tuning tasks. These instruments, available in digital and analogue versions, enable precise assessment of concentricity, flatness and comparative measurements in confined or critical areas.
How dial indicators work and where they are essential
Analogue dial indicators transmit the linear movement of the probe via a rack-and-pinion mechanism to the pointer, with an additional revolution counter showing extended travel. Many types operate in both compression and tension, so a wide effective measuring range is covered. Lever-type indicators use a lever system instead of a rack, offering a smaller range but finer resolution. Typical workshop applications include runout checks at the lathe, setting up depth on milling tables or circular saws, and comparative checks during series production.
Tangible benefits for everyday production
- Fast, repeatable readings for comparison work, reducing setup and inspection time.
- Stable measuring force and hardened contact tips for reliable, wear-resistant contact and consistent results.
- Broad selection: digital dial indicators, mechanical dial indicators, depth gauges, lever-type test indicators, fine‑point test indicators and thickness gauges cover most shop tasks.
- Reduced risk of measurement error through appropriate instrument choice and accessories, improving first-pass yield.
- Flexible deployment on machines and inspection benches thanks to standardised mounts and probes.
Why choose Metav as your precision partner
Metav stands for the democratisation of precision, combining decades of expertise with a comprehensive inventory for industry, crafts and trade. From Emmerich, Metav operates as a practical quality filter for the European market, supplying over 48,000 satisfied customers and more than 250,000 products. For buyers who prioritise dependability and a single-source approach, Metav’s range of dial indicators and related measuring equipment provides a technically sound and convenient solution.
Core takeaway
Dial indicators deliver precise, repeatable measurements across a variety of specialised tasks; selecting the correct type—whether digital, analogue or lever-type—ensures reliable results and smoother production processes.
FAQ
What is the main difference between analogue and digital dial indicators?
Analogue dial indicators transmit movement via a rack-and-pinion and show mechanical pointer travel, which can be advantageous for visual trend detection; digital dial indicators provide direct numerical readout and often allow data output for logging and analysis, both of which are available from Metav.
When should I use a lever-type test indicator instead of a standard dial indicator?
Use a lever-type indicator when you need finer resolution over a small measuring range or when the probe must access tight spaces; lever-type instruments are particularly useful for checking runout and small surface variations.
How do I avoid damaging an analogue dial indicator’s gearing?
Avoid forcing the probe beyond its travel range; where significant overtravel is possible, choose a model with an appropriate range or a built-in stop. A drag pointer or anti-backlash feature can also reduce the risk of gear damage by preventing delayed pointer return.
Are special contact tips necessary for different materials?
Yes. For consistent results and reduced wear, choose hardened contact tips or balls appropriate to the material and surface finish being measured; Metav’s product range includes a variety of probe tips and accessories for this purpose.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com