Precision dial indicators for accurate length and runout checks
Dial indicators and related gauges provide precise measurement of small lengths and deviations, serving applications such as concentricity, flatness and comparison checks on lathes and milling machines, and offering both digital and analog options to suit different measuring ranges. These instruments are used with appropriate accessories for tasks like depth measurement or runout testing and feature hardened contact faces or balls for reliable contact; typical variants include dial indicators, test indicators and depth gauges. Analog types transmit spindle movement via rack and pinion to the pointer and may include a drag pointer to prevent gear damage, while digital versions give straightforward numeric readouts for quick interpretation. Using these gauges improves setup accuracy, process control and the repeatability of measurements in metalworking and workshop environments.
50mm Extension Rod For Dial Indicators With 4mm Measuring Pin - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of a compact, precision-focused solution that extends the reach of dial gauges while keeping setup simple; the short 50 mm length and 4 mm measuring pin ensure reliable contact in confined measuring situations. Order the extension directly via Metav Werkzeuge or ask the Metav consultants for application advice. Extension piece L 50 mm — Extension for dial gauges, 4 mm measuring pin (KÄFER) The extension piece L 50 mm offers straightforward reach extension for dial gauges in confined or recessed measuring positions, designed as an accessory for standard workshop inspection setups 50 mm extension for confined access 4 mm measuring pin diameter for standard fits For use with dial gauges and dial indicators Single-piece supply, packaging unit 1 Access recessed features with consistent contact A short, rigid extension piece provides predictable probe reach where direct access is restricted. The 50 mm length increases the distance between the gauge body and the contact point, allowing measurements inside bores, slots or behind fixtures without repositioning the instrument. This avoids repeated set-ups and reduces cycle time in repetitive inspections. The compact design keeps the probe geometry stable, which helps to maintain measurement repeatability even in tight assemblies. Compatibility explained: what the measuring pin diameter means The 4 mm measuring pin denotes the diameter of the contact stem and determines mechanical fit with gauge sockets and holders. A standard 4 mm measuring pin ensures secure seating in many common dial gauge attachments and universal clamps, preventing lateral play that would degrade results. For users less familiar with these dimensions: the pin diameter is the interface dimension that carries the measurement force to the contact point; correct matching reduces measurement uncertainty and supports reliable comparison readings. Practical benefits for the workshop and inspection bench Delivered as a single item with SKU 4000851691NW, this accessory is a concise stock item for toolrooms, service departments and inspection benches that value low inventory complexity. Its role as an accessory for dial gauges simplifies parts management — a short extension avoids the need for longer, bulkier adapters when only modest reach is required. Where traceable processes are important, the simple geometry makes calibration checks and functional inspections quicker to perform and document. Contact Metav Werkzeuge for precise application advice and availability; technical consultants are available from the Emmerich location and can confirm fitment and lead times by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number / SKU: 4000851691NW Label: Verlängerungsstück L.50mm Messbolzen-D.4mm z.Messuhren KÄFER Product type: Verlängerungsstück Execution: Verlängerungsstücke für Messuhren Specifications Length: 50 mm Measuring pin diameter: 4 mm Packaging unit: 1 Features Designed for dial gauges / dial indicators Short extension for confined access Single-piece accessory for routine inspection use FAQ What is the measuring pin diameter of this extension piece? The extension piece is supplied with a 4 mm measuring pin, which is the interface diameter for attaching to compatible dial gauge sockets and holders. Will this part fit standard dial gauges and indicators? Compatibility is intended for dial gauges with matching pin receptacles; the extension piece L 50 mm from KÄFER is designed for common workshop gauge fittings and works with many standard indicator clamps. How does using the extension affect measurement accuracy? An accurately matched extension minimises lateral play; because the 4 mm measuring pin provides a secure fit, measurement repeatability is maintained when the probe geometry remains stable during each reading. Is this extension suitable for routine inspection benches and jigs? Yes. Supplied as a compact single item (SKU 4000851691NW), it is suited to inspection benches and jigs where a modest reach extension is required without introducing complex adapters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Inductive Digital Dial Indicator 0.001mm Resolution, 0.025mm Accuracy, Incremental Display, Supplied in Case - Metav IndustryLine
Take advantage of the combination of high-resolution measurement, robust inductive sensing and straightforward data output to speed up inspection cycles and reduce rework; order the gauge directly via Metav Werkzeuge or consult the specialists for application advice. Digital dial gauge M301.083 — inductive indicator, 50 mm range, 0.001 mm resolution The Digital dial gauge M301.083 is an inductive displacement indicator for workshop inspection and production control, offering fine-resolution readings and digital data connectivity in routine metrology tasks. Inductive measuring system for long life 0.001 mm resolution for fine detail ±0.025 mm stated accuracy for reliable control RB 7 data output for process integration Accurate measurement that speeds up quality checks The instrument delivers 0.001 mm resolution, combined with a stated accuracy of ±0.025 mm and a repeatability of 0.008 mm, which translates into measurable gains in process control and fewer repeat measurements. The inductive sensing principle reduces mechanical wear on the probe and ensures stable readings even during frequent use. For production environments where cycle time matters, the compact and responsive display shortens the inspection loop and supports faster decision making. Digital workflow: faster logging and traceability Equipped with an electronic display offering mm/inch, 0/OFF, PRESET, TOL and DATA keys, the indicator simplifies setup and tolerance checks at the bench. The integrated RB 7 data output enables straightforward transfer of measured values to SPC systems or data collectors, reducing transcription errors and accelerating documentation. For traceable batch control or spot checks during setup, the combination of preset and tolerance functions reduces operator steps and standardises acceptance criteria. Built for everyday workshop use The measuring head includes a 56 mm dial footprint and an inductive measurement system that tolerates typical workshop conditions while maintaining repeatability. With a compact mass of 0.3 kg, the indicator is easy to mount and reposition on test stands or fixtures without compromising stability. The inductive sensor also avoids direct mechanical gearing at the sensing interface, which lowers maintenance needs and preserves calibration intervals over extended use. Where this indicator brings value This digital indicator suits machine shops, toolrooms and inspection benches that require repeatable fine measurements across small to medium components. Its mix of precise resolution, straightforward tolerance functions and digital output makes it well suited for first-article inspections, in-process checks and final acceptance tests. For integrators and quality managers, the device supports rational measurement workflows while remaining simple enough for routine operator use. Contact Metav Werkzeuge for personalised application guidance, integration options with existing data systems, or to arrange a tailored quotation for the Metav IndustryLine digital indicator M301.083 Technical data Article number: M301.083 GTIN: 4054469164892 Category: Messuhren Manufacturer: Metav IndustryLine Facts Measuring range: 0–50 mm Resolution/readability: 0.001 mm Stated accuracy: 0.025 mm Repeatability: 0.008 mm Dial diameter: 56 mm Weight: 0.3 kg Tariff number: 90173000 Special features Measuring system: inductive Digital display functions: mm/inch, 0/OFF, PRESET, TOL, DATA Data output: RB 7 eClass: 21170308 ETIM: EC003591 FAQ How precise is the indicator for routine inspection tasks? The indicator delivers 0.001 mm resolution with a stated accuracy of ±0.025 mm and a repeatability of 0.008 mm, making it suitable for precise workshop and production checks. Can the display be switched between metric and imperial units? Yes, the digital display provides an mm/inch function and includes PRESET and TOL keys to support unit changes and quick tolerance checks. Does the indicator support data transfer to PC or SPC systems? Values can be exported using the RB 7 data output; this enables direct logging into compatible data collectors or SPC software for traceability. What is the measuring range and intended application area? The measuring range is 0–50 mm, ideal for component inspection, toolroom measurements and bench testing where fine displacement sensing is required. Is the device part of a recognised product line? This instrument is supplied under Metav IndustryLine as a workshop-oriented digital indicator (SKU M301.083), combining practical functions with industrial connectivity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Insert Pin Ø 1.5mm For Dial Indicators Steel - Käfer Messuhrenfabrik GmbH & Co. KG
Benefit from precise, repeatable contact points thanks to the hardened steel construction and a 1.5 mm diameter tip that ensures consistent readings; order this measuring contact pin directly via Metav Werkzeuge or consult our specialists if clarification is needed. Käfer measuring contact pin – 1.5 mm Ø, 50 mm length, M2.5 thread Käfer measuring contact pin for dial indicators, a slim contact probe designed for confined measuring points and reliable signal transmission in workshop and inspection environments Ø 1.5 mm contact tip for fine measurements 50 mm overall length for extended reach M2.5 thread for standard indicator fittings Solid steel construction for stability and wear resistance Accurate contact for fine measurement points The measuring contact pin provides a consistent contact geometry thanks to its 1.5 mm diameter tip and straight 50 mm length, which together reduce deflection and help maintain reproducible measurements. In practical terms, the small tip diameter allows access to narrow grooves and closely spaced features, while the extended shank keeps the indicator clear of nearby obstructions. The combination of those dimensions supports a reliable tactile interface between the workpiece and the measuring instrument, enabling clear analogue or digital indicator deflection with minimal lateral play. This paragraph explains why the dimensional choices matter for inspection tasks and how they translate into repeatable measurement results. Simple compatibility with common dial indicators Fitted with an M2.5 thread, this probe mates with a wide range of dial gauges and indicator heads that accept metric fine threads. The thread standard allows straightforward installation and secure locking, so the contact pin remains stable during short measurement cycles and vibrational conditions typical in workshops. For users unfamiliar with thread standards, M2.5 denotes a metric screw with a 2.5 mm nominal diameter; it is a frequent size for small indicator accessories. This clarity supports quick decision-making when choosing accessories for existing indicator fleets and minimises downtime for retrofitting. Robust material choice for long service life Manufactured in steel, the pin balances hardness with resistance to impact and surface wear, making it suited for frequent contact against ferrous and non-ferrous parts under normal inspection loads. The material selection reduces the need for frequent replacements and keeps long-term operating costs low. If surface finish is critical, the steel shank provides a stable base for adding custom tips or sleeves where applicable; however, the supplied geometry is optimised for direct contact on typical machined surfaces. The construction therefore supports dependable day-to-day use in production, maintenance and quality control contexts. Practical handling and maintenance guidance Routine care is straightforward: keep the contact face free of burrs and contamination to preserve reading fidelity, and inspect the 1.5 mm tip for rounding after extended service. Replacement is simple because the M2.5 thread enables quick removal and installation without requiring specialist tools. When explanations of technical terms are needed, "contact pin" or "probe" refers to the small, usually hardened element that transfers mechanical motion from the part under test to the measuring instrument. Clear maintenance guidance like this helps non-specialist staff preserve measurement accuracy and extends the functional life of the accessory. Choose the Käfer measuring contact pin for precise, accessible measurement points — contact Metav Werkzeuge for procurement or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000851588NW Designation: Measuring contact pin, Ø 1.5 mm, L 50 mm Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Facts Diameter: 1.5 mm Length: 50 mm Thread: M2.5 Packaging unit: 1 Special features Material: Steel Form: Pin Product type: Measuring contact for dial indicators Suitable for fine, narrow measuring points FAQ What is the nominal diameter of the contact tip? The contact tip has a nominal diameter of 1.5 mm, which is specified for the Käfer measuring contact pin and suits fine-feature measurement. Which thread does the probe use for mounting? The probe is fitted with an M2.5 thread, a common metric fine thread for small indicator accessories. Is the measuring contact pin suitable for use on hardened surfaces? The pin is made of steel and is intended for routine inspection contact; for very hard or abrasive surfaces, inspection after use is recommended to check for wear. How long is the shank and what reach does it provide? The overall length of the shank is 50 mm, providing extended reach for measurements in confined or recessed areas. Can the probe be replaced individually on existing dial indicators? Yes, the M2.5 threaded design enables individual replacement on compatible indicators without special adapters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
53mm Dial Indicator Cover With Eyelet, 4 Mounting Holes For Models 208.005/208.006/208.007/208.009 - Metav IndustryLine
Benefit from a compact accessory that ensures a secure attachment for dial indicators and straightforward integration into existing measuring setups; the small footprint and reliable four‑hole fixing combine stability and easy handling. Order the accessory directly via Metav Werkzeuge or consult the team for fitment advice. M208.132 – Cover for Dial Indicator with Eyelet, 4‑hole, 53 mm (Metav IndustryLine) The M208.132 is a cover for a dial indicator that provides a compact mounting solution with an integrated eyelet and four‑hole fixing, suitable for workshop and portable measuring rigs. Compatible with MM205.005–MM208.007 and MM208.009 Compact 53 mm diameter for tight spaces Four‑hole fixing for stable attachment Lightweight: 0.15 kg for easy handling Stable mounting that keeps readings consistent The accessory is designed as a compact mounting interface that secures a dial indicator by means of a four‑hole fixing and an integrated eyelet, which prevents rotation and reduces measurement noise. With a compact 53 mm diameter, the part is well suited to confined setups where conventional clamps would obstruct access. By fixing the instrument close to the measured surface, reproducible readings are supported and the risk of micro‑vibration affecting the indicator is minimised. Simple integration into existing inspection workflows This cover is prepared for quick retrofitting to compatible dial indicators and can be incorporated into bench‑top jigs or portable measurement rigs without modification. The low mass of 0.15 kg makes handling straightforward and reduces load on small fixtures, while the four fixing points distribute forces evenly to preserve alignment. Compatibility with a range of indicator models ensures flexible use across common inspection duties, improving workflow efficiency and reducing setup time. Built for reliable everyday use in the workshop As a precision accessory from a recognised industrial line, the component is intended to support repeatable metrology tasks rather than replace primary instruments. Its straightforward design prioritises mechanical stability and ease of use, aiding technicians who require dependable mounting for comparative or inspection measurements. The product complements standard measuring equipment and is a practical addition for maintenance, quality checks and assembly stations. Contact Metav Werkzeuge for procurement and technical assistance regarding the M208.132 cover and its application in specific measurement setups Technical data Article number: M208.132 SKU: M208.132 GTIN: 4061905041945 Label: Deckel für Messuhr mit Öse, 4 Löcher für 208.005, 208.007, 208.006 und 208.009 Facts Diameter: 53 mm Weight: 0.15 kg Special features Suitable for dial indicators MM205.005–MM208.007 and MM208.009 Four‑hole fixing for secure attachment Integrated eyelet for hanging or securing accessories FAQ Which dial indicators are compatible with this cover? The M208.132 cover is compatible with dial indicators listed as MM205.005–MM208.007 and MM208.009 and will fit those models without modification. What are the key dimensions and weight of the cover? The cover has a diameter of 53 mm and a mass of 0.15 kg, giving a compact footprint and easy handling in inspection setups. How is the cover mounted to achieve stable readings? Stability is achieved via a four‑hole fixing that distributes load and prevents rotation; the eyelet also allows secure hanging or anchoring in jigs when required. Is the M208.132 suitable for portable measurement work? Yes, the low weight and compact design make the M208.132 suitable for both bench and mobile measuring arrangements where space and ease of handling matter. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
55mm Extension For Dial Gauges, M2.5 Thread, Ø4.5mm Stainless Steel - Metav IndustryLine
Combining robust stainless steel construction with a standard M2.5 thread and a compact 55 mm length, this extension delivers precise probe reach in confined measurement tasks; order directly via Metav Werkzeuge or consult our advisors for application support. Extension for dial indicators, 55 mm, M2.5 thread — Metav IndustryLine The Extension for dial indicators, 55 mm, M2.5 thread is an accessory designed to extend probe reach for dial gauges and test indicators in tight or recessed measurement points. 55 mm stainless steel extension M2.5 thread for standard dial indicators 4.5 mm probe diameter for narrow bores Lightweight 0.01 kg for easy handling Precision where space is tight When access is limited, extending the stylus without sacrificing measurement integrity matters. The compact extension features a 55 mm overall length and a 4.5 mm probe diameter, enabling reliable contact inside narrow bores or recessed features while maintaining a stable measuring line. Fitted with a standard M2.5 thread, it connects to most dial indicators and test gauges used in workshop and inspection environments; this interchangeability reduces setup time and avoids non‑standard adaptors. The extension’s low mass (approx. 0.01 kg) minimises added inertia on the indicator spindle, supporting consistent readings and reducing the risk of oscillation during touch‑offs. Robust design that supports repeatable results Manufactured from stainless steel, the component resists corrosion and keeps its dimensional stability under routine shop conditions. This material choice ensures long service life and repeatable contact geometry, which directly contributes to fewer recalibrations and less downtime. Where traceability and repeatable procedures are essential, a simple mechanical accessory such as this improves process reliability by preserving gauge alignment and probe orientation. The compatibility with established metric threads also supports rapid swapping between instruments in a metrology bench or on the shop floor, enhancing workflow efficiency. Practical integration and supply confidence The extension is a straightforward means to adapt existing gauges for specialised tasks without investing in bespoke probes. For procurement and technical clarification Metav positions itself as a reliable partner: stock availability from Emmerich, clear product identification and consistent quality control reduce lead times and purchasing complexity. For users assessing fixture fitment or planning measurement sequences, the stainless construction and standard M2.5 thread simplify fixture design and spare‑parts management. Confidence in the component’s performance is further supported by Metav’s experience in supplying precision tools to industry and trade. Contact Metav Werkzeuge for purchase and integration advice on the Metav IndustryLine dial indicator extension (SKU M208.063.E) and benefit from fast, reliable delivery from Emmerich. Technical Data SKU: M208.063.E GTIN: 4054469104294 ECLASS: 21170613 ETIM: EC002219 Customs tariff number: 90179000 Category path: Measuring instruments > Accessories Image file: 2080631-main.jpg Facts Length: 55 mm Diameter: 4.5 mm Thread: M2.5 Weight: 0.01 kg Special features Material: stainless steel Application: accessory for dial indicators Brand: Metav IndustryLine FAQ Is this extension compatible with standard dial indicators? Yes. The extension uses a standard M2.5 thread and is designed for use with most dial indicators and test gauges; the product is listed under the Metav IndustryLine range (SKU M208.063.E). What material is the extension made from and why does that matter? The extension is manufactured from stainless steel, which provides corrosion resistance and dimensional stability, ensuring consistent contact geometry during repeated measurements. Can the extension be used for narrow bores? Yes. With a 4.5 mm probe diameter and a 55 mm length, the extension is suitable for accessing narrow bores and recessed features where a standard stylus would be too short. How much additional mass does the extension add to the indicator? The component weighs approximately 0.01 kg, adding minimal mass to the indicator spindle and helping to maintain measurement stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
58mm Depth Measuring Attachment For Dial Indicator 16mm Diameter, 8mm Shank – Metav IndustryLine
Take advantage of precise depth control and quick mounting for reliable repeatable measurements; the compact design suits confined bores while compatibility with 8 mm shank dial indicators keeps setup efficient. Order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. Depth measuring stop for dial indicator, 16 mm contact, 58 mm length (Metav IndustryLine) A compact depth measuring stop designed as an accessory for dial indicators, providing a small contact pad and a short overall length for depth checks in confined bores and tight assemblies. Designed for dial indicators with Ø8 mm shank 16 mm contact pad for confined holes 58 mm overall length for tight spaces Exact contact in restricted spaces The accessory offers a 16 mm contact pad on a compact body, making it suited to depth checks where access is limited. Its short profile and 58 mm overall length minimise interference inside narrow bores and small housings, enabling consistent positioning of the dial gauge. Designed for use with dial indicators, the component reduces fixturing effort and limits operator-induced variance, which improves throughput in routine inspection tasks. Secure mounting and mechanical stability Mounting is achieved via the standard Ø8 mm shank interface, ensuring a snug fit on common indicator stems and quick interchangeability between gauges. The accessory’s geometry provides a stable contact that helps keep the indicator movement free from lateral play; this stability supports repeatable results across multiple measurements. A clear operational note requires the use of a measuring insert with diameter below 3 mm to avoid overloading the contact area and to maintain measurement integrity. Practical workshop integration and traceable reference As a workshop-ready accessory, the depth stop fits established inspection workflows and is straightforward to store with other metrology tools. Its compatibility with dial indicators (suitable for gauges up to 25 mm face size with an 8 mm shank) keeps set-ups simple and reduces downtime when switching tasks. The component is listed under SKU M208.062.6, making procurement and inventory management straightforward for purchasing and quality teams. Contact Metav Werkzeuge to specify the Metav IndustryLine depth stop for reliable depth measurements; our consultants in Emmerich are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M208.062.6 GTIN: 4054469183695 Category: Dial indicator accessories Facts Weight: 0.43 kg Overall length: 58 mm Diameter (contact): 15.8 mm Special features Compatible with dial indicators (up to 25 mm face) with Ø8 mm shank Use only with measuring insert diameter < 3 mm Suitable for depth measurement in confined bores FAQ What is this accessory intended for? The depth measuring stop is intended as a gauge accessory for depth checking with a dial indicator; it provides a compact contact pad and short overall length for confined measurements. Which dial indicators fit this depth stop? This depth stop fits dial indicators that accept an Ø8 mm shank; it is referenced for gauges up to 25 mm face size and mounts directly to the indicator stem. Are there special requirements for the measuring insert? Yes, operation requires a measuring insert with a diameter below 3 mm to ensure correct contact and to avoid overloading the contact pad. Can this stop be used in very narrow bores? The compact design and 16 mm contact pad make the stop suitable for narrow bores and tight assemblies where longer accessories would interfere. What is the product reference for ordering? The item is listed as SKU M208.062.6 and is supplied as a Metav IndustryLine accessory for dial indicators. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
58mm Dial Gauge Back Plate For Outer Ring, For Dial Gauges - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of a precise, factory-compatible replacement that ensures a secure fit for dial gauge outer rings of Ø 58 mm and reduces assembly uncertainty; order the part directly via Metav Werkzeuge or consult the team for compatibility advice. Eyelet Backplate for Dial Gauge, Ø 58 mm — Käfer The Eyelet Backplate for Dial Gauge, Ø 58 mm is a compact mounting component intended to secure the outer ring of standard dial gauges, offering a reliable connection point within gauge assemblies. Precise fit for Ø 58 mm outer rings Compatible with standard dial gauges Robust replacement part for gauge assemblies Secure alignment for gauge measurements A correctly matched backplate is essential where repeatable readings matter. This eyelet backplate provides a precision fit for an outer ring of Ø 58 mm, ensuring the gauge seating remains true under inspection or during intermittent measurement tasks. By matching the outer ring diameter, the component reduces lateral play and assists in maintaining consistent probe geometry, which translates into fewer measurement deviations and more dependable results in routine checks. Fast serviceability and reduced downtime As a spare part designed for gauge assemblies, the component simplifies maintenance workflows. The compatibility with standard dial gauges means workshops can replace worn or damaged mounting elements swiftly, thereby reducing interruptions to inspection schedules. Where instrument exchange is needed, the unit’s defined dimensions support repeatable reassembly, helping to preserve calibration intervals and streamline troubleshooting procedures. Practical applications and workshop advantages Ideal for instrument repair benches and metrology stations, the eyelet backplate performs as a targeted replacement for faulty mountings within gauge setups. The component suits environments focused on instrument reliability and operational continuity; technicians benefit from a part that reinstates expected mounting geometry without extensive modification. For queries about suitability in specific assemblies or verification against particular dial indicators, further technical clarification is available. For assured compatibility with Käfer dial gauges and to arrange supply via Metav Werkzeuge, please contact Metav Werkzeuge GmbH for ordering and application support; their consultants will advise on fit and dispatch options. Technical data Article number: 4000851549NW Product: Eyelet backplate for outer ring Ø 58 mm for dial gauges Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Packaging unit: 1 Facts Outer ring diameter: 58 mm Packaging unit: 1 Article number: 4000851549NW Special features Suitable for dial gauges Compatible with outer ring Ø 58 mm Replacement backplate for gauge assemblies FAQ What is the primary purpose of this backplate? The eyelet backplate is a mounting component intended to secure the outer ring of dial gauges, restoring correct seating and alignment for reliable measurement results with the Käfer gauge assembly. Which gauges will fit this backplate? This backplate is compatible with dial gauges that use an outer ring of Ø 58 mm; compatibility should be confirmed against the gauge’s mounting dimensions and the article number 4000851549NW. Is this an original Käfer part? Yes, the part is listed under Käfer Messuhrenfabrik and is intended as a factory-compatible mounting replacement for Käfer dial gauge assemblies. Can the backplate be used to repair worn gauge mountings? The component serves as a direct replacement for worn or damaged mounting elements in gauge assemblies and helps to reinstate the correct geometry for repeatable measurements. Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
58mm Magnetic Back Plate For Dial Indicators, For Outer Ring, Magnetic Mounting - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of a precise, fast magnetic mounting solution that secures dial indicators reliably to ferrous surfaces while saving set-up time; order or request advice through Metav Werkzeuge for supply and application guidance. Magnetic Rear Plate for Outer Ring Ø 58 mm — Magnetic Back Plate for Dial Indicators (Käfer) A magnetic back plate for outer ring Ø 58 mm, designed to fasten dial indicators to ferrous fixtures for repeatable shop-floor and inspection measurements. Magnetic mounting for quick attachment Fits outer ring Ø 58 mm Designed for dial indicators Low-profile, workshop-ready design Consistent, repeatable mounting for accurate readings The magnetic back plate provides a stable datum for analogue dial gauges and comparable indicators, enabling repeatable measurements in production and inspection routines. Its magnetic mounting eliminates the variability of clamp-based attachments, thereby reducing repositioning error and saving setup time on each measurement cycle. By securing the indicator to ferrous surfaces with a compact magnetic interface, the accessory supports more reliable readings and fewer rechecks, which improves throughput in quality control. Compatibility that streamlines inspection workflows Engineered to fit an outer ring Ø 58 mm, the component is suitable for a wide range of standard dial indicators and is described as compatible with Messuhren (dial gauges). The clear specification of the ring diameter simplifies parts selection and inventory management. Integrating this magnetic plate into inspection fixtures shortens preparation steps and reduces the number of bespoke adaptors required, which translates into lower process complexity and predictable measurement outcomes for routine checks and batch inspections. Practical design for workshop durability and handling Constructed for everyday use in workshop and measuring-room environments, the plate’s form factor keeps the mounted indicator close to the measurement point while remaining robust against incidental contact. The low-profile geometry reduces the risk of accidental displacement during handling, and the magnetic attachment allows fast removal and reorientation without tools. These attributes support steady operation under normal shop conditions and make the accessory a practical addition to maintenance benches and metrology stations. Clear benefits for procurement and service planning Specifying a dedicated magnetic back plate for indicators standardises fixture components across a department, aiding maintenance planning and spare-parts logistics. The defined compatibility (outer ring Ø 58 mm) and compact form enable predictable integration with existing stands and holders. Choosing a matched accessory reduces the likelihood of incompatible fittings and helps maintain measurement consistency across multiple operators and shifts, contributing to dependable quality assurance. For procurement or technical advice on the Käfer magnetic back plate, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for supply and compatibility support Technical Data Article number: 4000851546NW SKU / UID: 4000851546NW Product name: Magnetrückwand for outer ring Ø 58 mm Brand: Käfer Messuhrenfabrik GmbH & Co. KG Packaging unit: 1 Core data Outer ring diameter: 58 mm Suitable for: dial indicators (Messuhren) Packaged quantity: 1 Special features Magnetic rear plate for mounting on ferrous surfaces Low-profile design for close mounting of indicators Workshop and inspection use FAQ Is this magnetic plate compatible with all dial indicators? Compatibility is defined by the outer ring diameter; the magnetic rear plate fits dial indicators with an outer ring Ø 58 mm and is therefore suitable for most standard Messuhren matching that size How does the magnetic attachment affect measurement stability? The magnetic rear plate provides a firm, repeatable contact with ferrous mounting surfaces, which improves stability compared with temporary clamp solutions and supports consistent readings with Käfer dial indicators (SKU 4000851546NW) Can the plate be used on non-ferrous fixtures? The magnetic function requires a ferrous surface for secure attachment; for non-ferrous fixtures, a ferrous adapter or alternative clamping solution is needed as the magnetic back plate is designed for magnetic mounting Is the product suitable for shop-floor environments? Yes; the design and magnetic attachment make the plate appropriate for workshop and inspection-room conditions where quick, repeatable mounting of dial indicators is required What should be checked before fitting an indicator to the plate? Confirm the indicator’s outer ring diameter is Ø 58 mm and ensure the mounting surface is flat and ferrous to achieve reliable magnetic contact with the Käfer magnetic rear plate (SKU 4000851546NW) Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
59mm Magnetic Dial Indicator Cap 4 Holes Three-Point Hold 10kg Magnetic Force - Metav IndustryLine
Take advantage of a compact magnetic mounting that combines a 10 kg holding force with a four-hole fixing pattern for secure, repeatable readings; lightweight construction and compatibility with common dial gauge models simplify inspection workflows. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Magnet cover for dial gauge M208.131 — four-hole mount, 10 kg magnetic force (Metav IndustryLine) The Magnet cover for dial gauge M208.131 is a compact magnetic mount designed to secure a dial indicator to iron or steel surfaces for reliable measurements in inspection, tooling and workshop setups. Strong 10 kg magnetic hold Four-hole mounting pattern Fits dial gauges MM205.03–MM208.007 Stable magnetic fixation for consistent readings The magnetic cover provides a stable fixation for a dial indicator, using a 10 kg magnetic holding force and a four-hole mounting pattern to prevent rotation or slippage during measurement. This stability reduces setup variation and helps achieve repeatable measurements, which is essential when performing batch inspections or adjusting tooling. The compact geometry keeps the mass low while providing a rigid contact to ferrous surfaces, making the accessory suitable for bench work and machine-side checks where consistent datum reference is required. Compact, workshop-friendly design that saves handling time A compact footprint and a light weight of 0.15 kg make the accessory easy to position and reposition on iron or steel components without adding significant bulk to the measurement set-up. The nominal diameter of 59 mm supports close clearance in confined spaces while the four-hole layout allows secure attachment of many common dial indicator models. Because the unit is expressly intended for ferrous substrates, it integrates cleanly into inspection benches, fixture adjustments and jig work where rapid, repeatable placement speeds up throughput and reduces non-productive time. Practical accessory that improves measurement workflow As an accessory for dial indicators, this magnetic cover streamlines repetitive measurement tasks by offering a secure, low-profile base that keeps the instrument in the intended orientation. The combination of a compact profile, four-hole fixation and strong magnetic hold reduces the need for temporary clamping or improvisation, contributing to smoother workflow in quality control and maintenance operations. The component is particularly useful in environments where frequent repositioning is required, enabling fast transitions between measuring points while maintaining a consistent reference point. Contact Metav Werkzeuge today to discuss how the M208.131 magnetic cover can be integrated into existing inspection fixtures or to request compatibility details — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M208.131 GTIN: 4061905042560 Brand: Metav IndustryLine Weight: 0.15 kg Diameter: 59 mm Facts Magnetic force: 10 kg Mounting holes: 4 Compatible with: MM205.03–MM208.007 Special features Four-hole mounting pattern Magnetic holding force 10 kg Designed for iron and steel surfaces Compact, lightweight accessory for dial indicators FAQ Is the magnetic cover suitable for non-ferrous surfaces? The magnetic cover requires a ferrous substrate; it secures a dial indicator on iron or steel surfaces and is not effective on non-ferrous materials. Which dial gauges are compatible with this magnetic mount? Compatibility is indicated for the specified range MM205.03–MM208.007; the M208.131 accepts dial indicators that match the four-hole mounting pattern used by these models. How strong is the magnetic hold and what does that mean in practice? The magnetic holding force is 10 kg, which provides a reliable grip for typical inspection and workshop scenarios, reducing the risk of accidental movement during measurement. Can the magnetic cover be used on irregular or curved surfaces? Effective use requires a reasonably flat contact area on iron or steel; small surface irregularities may reduce holding force, so a flat or gently curved region is preferred. Does the magnetic cover include any additional mounting hardware? The magnetic cover is supplied as the mounting component; specific fixing screws or additional adapters should be selected according to the dial indicator and fixture requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5mm Ball Probe For Dial Test Indicator Thread M2.5 - Metav IndustryLine
A compact ball contact insert that combines a 5 mm contact ball with a secure M2.5 thread for reliable, repeatable tactile measurements; ideal for replacing worn tips or adapting existing dial indicators. Order the insert directly via Metav Werkzeuge or consult our specialists for fitment advice. Dial gauge contact insert — ball Ø5 mm, M2.5 thread (Metav IndustryLine) A Dial gauge contact insert with a 5 mm ball and M2.5 thread for precise contact measurement on standard dial indicators 5 mm precision ball contact tip M2.5 thread for secure mounting Smooth contact to reduce surface marking Compact, durable design for repeatability Precision contact for repeatable tactile measuring results The Dial gauge contact insert, ball Ø5 mm, M2.5 thread provides a consistently defined contact geometry that improves measurement repeatability when used with compatible dial indicators. The spherical contact concentrates the probing point while limiting contact area, which helps to reduce local surface deformation and provides a stable measuring interface. This results in reduced variability between successive readings and supports dependable process control in workshop and inspection environments. Easy adaptation and robust fitment for routine metrology tasks Machined to fit a standard M2.5 thread, the contact insert can be mounted quickly to most dial indicators with an M2.5 mounting connection, offering a straightforward way to restore worn tips or to adapt an indicator for specific part geometries. The compact format and secure thread engagement ensure minimal play at the contact point, delivering repeatable contact under typical measuring forces and making the insert suitable for frequent use in production and quality‑control settings. Reduced marking and application versatility for delicate surfaces The spherical tip design moderates contact pressure concentration compared with sharper probes, which helps to minimise visible marks on sensitive workpiece surfaces during comparative or reference checks. This makes the insert appropriate for finishing inspections or measurements on softer materials where preserving surface integrity is important. Compatibility details and compact form factor make this accessory a practical addition to a metrology kit, enhancing the functional range of standard dial indicators without extensive modification. For tailored advice or to secure the Metav IndustryLine measuring insert (SKU M208.167) with a 5 mm ball and M2.5 thread, contact Metav Werkzeuge for expert guidance and order support. Technical Data Article number: M208.167 GTIN: 4054469105192 Category: Zubehör Facts Weight: 0.1 kg Ball diameter: 5 mm Thread: M2.5 Tariff number: 90319000 Special features Compatible with dial indicators with M2.5 mounting thread Smooth spherical contact tip for reduced marking Compact accessory for tactile measuring applications FAQ What types of dial indicators are compatible with this insert? Compatibility is for dial indicators that feature a M2.5 mounting thread; the insert is designed to screw directly into those standard connections. Will the 5 mm ball tip damage delicate surfaces? The spherical geometry reduces concentrated indentation compared with sharper probes, so the 5 mm ball is less likely to cause visible marks on softer materials during typical inspection use. Is the insert supplied ready to use with calibration documentation? The insert is supplied as an accessory; calibration documentation is not included unless specifically stated for a calibrated product. For traceable calibration options, please consult Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5mm Dial Gauge 0.001mm Resolution Plastic Case, Ø60mm Werksnorm - Metav IndustryLine
There is inconsistent product information: the product label describes a plastic housing while the material specification indicates a metal housing. This contradiction affects a core characteristic of the item and prevents a reliable product description from being produced. The discrepancy between the label and the specification creates confusion regarding the true nature of the product, which is essential for accurate communication with potential customers. Please confirm which housing is correct (plastic or metal) and whether the supplied case is intended for transport as stated. Once the housing material and packaging are clarified, a complete, accurate British English product text can be generated to ensure clarity and consistency.
5mm Dial Gauge M3 S With Shock Protector 0.01mm Resolution, 58mm Dial - Käfer Messuhrenfabrik GmbH & Co. KG
Benefit from accurate 0.01 mm resolution, a compact 5 mm measuring range and built‑in shock protection for reliable short‑travel checks in workshop and inspection environments; order the Käfer M3 S dial indicator directly via Metav Werkzeuge or request guidance from our consultants. Käfer M3 S dial indicator — 5 mm travel, 0.01 mm graduation, with shock protection The Käfer M3 S dial indicator is a compact inspection gauge designed for short‑range linear measurement tasks in machining, toolroom and quality‑control workflows. 5 mm measuring range for short travel checks 0.01 mm resolution for fine measurement steps Integral shock protection for robust workshop use 58 mm outer ring diameter for clear readout Precise short‑range checks that speed up inspection cycles The compact design enables rapid assessments where only small displacements must be monitored. With a 5 mm measuring range and a 0.01 mm graduation, the instrument converts tiny mechanical movements into a clear dial reading, allowing technicians to detect deviations quickly and confidently. The large 58 mm outer ring improves legibility, reducing interpretation time and supporting faster throughput on inspection benches. The mechanical gearing that gives 0.5 mm per pointer revolution is explained on the dial and simplifies repeatable comparative measurements, which supports a consistent quality control routine. Robust construction for daily workshop use Built with an emphasis on durability, the indicator’s integral shock protection reduces the risk of damage from incidental knocks and helps maintain calibration over time. The sturdy casing and protected movement increase the lifespan of the instrument under normal shop conditions, lowering the frequency of replacements and downtime. Where resilience matters, this inspection gauge combines compact form with mechanical safeguards to preserve measurement reliability during transport and routine handling. Clear readout and straightforward interpretation The dial design translates fine spindle movement into an easily legible scale, so even operators with limited metrology training can perform routine checks. The dial’s graduation of 0.01 mm supports fine tolerance assessments while the pointer mechanics—one pointer revolution corresponding to 0.5 mm—allow quick estimation of cumulative displacement. This clarity reduces measurement errors and the need for repeated checks, supporting more efficient process control and fewer rework cycles. Integration into measurement setups and stands The instrument’s compact format and standard mounting geometry permit straightforward placement in magnetic bases or inspection stands commonly found in workshops. Its configuration suits short‑stroke tasks such as run‑out checks, seat testing, or step measurement where a small, precise gauge is preferable to larger instruments. The combination of small travel and fine resolution makes it a practical choice for bench‑level inspection and post‑machining verification workflows. For dependable short‑range measurement and robust day‑to‑day performance, choose the Käfer M3 S dial indicator via Metav Werkzeuge and discuss technical requirements with our Emmerich‑based specialists for efficient supply and application advice Technical Data Article number: 4000851439NW Label: Messuhr M3 S 5mm Abl.0,01mm m.Stoßschutz KÄFER Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Product type: Dial indicator Model series: M3 S Facts Measuring range: 5 mm Graduation / resolution: 0.01 mm Pointer rotation: 1 pointer revolution = 0.5 mm Outer ring diameter: 58 mm Packaging unit: 1 UID: 4000851439NW Special features With shock protection Compact short‑travel gauge Large dial for improved legibility Suitable for bench‑level inspection and magnetic base mounting FAQ What measurement accuracy can be expected from this dial gauge? The Käfer M3 S dial indicator provides a graduation of 0.01 mm, enabling precise short‑range readings suitable for many workshop inspection tasks; overall accuracy depends on setup and handling during measurement. Is the instrument suitable for use with magnetic stands and test indicators? Yes, the indicator’s compact form and standard mounting geometry allow integration with typical magnetic bases and inspection stands used in machining and metrology benches. How is the dial interpreted when monitoring cumulative displacement? The pointer mechanics of the device indicate 0.5 mm per full revolution, so cumulative displacement is read by counting full revolutions and adding the finer 0.01 mm graduations for the final value. Does the built‑in shock protection affect measurement performance? The integral shock protection is designed to safeguard the movement against incidental impact while maintaining normal measurement performance and repeatability when the instrument is correctly mounted and used. Can this gauge be used for run‑out and seat checks on turned parts? The short 5 mm travel and fine 0.01 mm resolution make the gauge well suited for run‑out, seat, and short‑stroke verification on turned or machined components where fine adjustment is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5mm Dial Gauge M3 T 0.01mm Resolution, 0.5mm Per Revolution, Ø58mm - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of the combination of 0.01 mm resolution and a compact 5 mm measuring range for dependable workshop checks; the clear 58 mm dial and 0.5 mm per revolution scale ensure fast interpretation. Order the Käfer M3 T dial gauge directly via Metav Werkzeuge or consult our specialists for application advice. Käfer M3 T Dial Gauge — 5 mm range, 0.01 mm resolution M3 T dial gauge for precise comparative measurements and routine workshop inspection tasks High resolution 0.01 mm Measuring range 5 mm One revolution = 0.5 mm 58 mm outer dial for clear reading Consistent measurement precision for quality control The M3 T is engineered to deliver repeatable results where small deviations matter. With a 0.01 mm graduation and a total 5 mm measuring range, the indicator supports comparative measurement, run‑out checks and fine alignment tasks commonly required in assembly and inspection processes. The scale arrangement — one revolution = 0.5 mm — allows operators to track sub‑millimetre movement reliably; this means every full turn of the pointer corresponds to 0.5 mm of travel, simplifying interpretation during stepped measurements. The compact design provides a precise measuring tool without adding bulk to inspection rigs. Fast, unambiguous readings reduce cycle time A large 58 mm outer dial improves legibility under workshop lighting, reducing reading errors and speeding up inspection routines. The clear graduation and contrast on the dial make incremental changes immediately visible, supporting efficient quality control and fewer rework cycles. As a dial gauge, it integrates well into standard indicator holders and bench setups, providing a dependable visual reference for both quick checks and documented measurement tasks. The combination of a wide, readable dial and fine graduation is tailored to minimise interpretation time in production environments. Reliable operation for daily workshop use Designed for routine use, this measuring instrument combines simplicity with practical performance. The scaled pointer movement and robust mechanics mean consistent behaviour over repeated cycles, assisting in maintaining process stability. For workshops seeking economical precision, the instrument’s 0.01 mm graduation and 5 mm range provide the necessary resolution for many adjustment and verification tasks without excessive complexity. Technical enquiries or compatibility questions can be referred to Metav Werkzeuge’s specialist team, who can advise on integration with existing metrology setups. Contact Metav Werkzeuge for application guidance or to request the Käfer M3 T dial gauge — Metav’s consultants in Emmerich will recommend the best setup for the intended inspection task Technical data Article number: 4000851428NW Label: Messuhr M3 T 5mm Abl.0,01mm KÄFER Product type: Messuhr / dial gauge Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Facts Resolution: 0.01 mm Measuring range: 5 mm 1 pointer revolution: 0.5 mm Outer dial diameter: 58 mm Special features Model series: M3 T Packaging unit: 1 UID: 4000851428NW FAQ What is the smallest increment readable on this instrument? The Käfer M3 T dial gauge has a resolution of 0.01 mm, indicated on the dial graduations. What measuring range does the gauge cover? The instrument provides a total measuring range of 5 mm, suitable for fine comparative checks. How much linear travel corresponds to one full pointer revolution? One full revolution of the pointer equals 0.5 mm, which is shown by the dial arrangement for easier counting of turns. What is the dial diameter for visual reference? The outer dial diameter measures 58 mm, giving a clear, easily readable display. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5mm Dial Indicator FM1000/5 S With Impact Protection 0.001mm Resolution, 58mm Bezel - Käfer Messuhrenfabrik GmbH & Co. KG
Compact accuracy and robust protection combine to make the Käfer FM1000/5 S a reliable choice for routine inspection and workshop measurement tasks; its 5 mm measuring range and 0.001 mm resolution deliver fine control over tolerance checks. Order the dial gauge directly via Metav Werkzeuge or consult our advisors for application guidance. Käfer FM1000/5 S Dial Gauge — 5 mm range · 0.001 mm resolution Käfer FM1000/5 S is a precision dial gauge designed for workshop inspection and quality control, offering fine incremental readings and mechanical shock protection for everyday use. High-resolution 0.001 mm reading 5 mm measuring range Built-in shock protection 58 mm bezel for clear reading Fine measurement where small deviations matter The dial gauge delivers 0.001 mm graduations across a 5 mm measuring range, enabling dependable detection of minimal dimensional deviations. This degree of resolution is particularly valuable for calibration work, component inspection and process control where repeatability is essential. The instrument’s scale layout and the specified one revolution = 0.2 mm clarification make interpretation straightforward: every full turn of the pointer corresponds to 0.2 mm, while the fine divisions indicate thousandths of a millimetre, so results can be read and recorded with confidence. Built for workshop resilience and legibility A reinforced housing with integrated shock protection preserves measurement stability under routine handling and occasional impacts common on the shop floor. The 58 mm bezel enhances readability, reducing operator error during rapid checks. Together, these design choices reduce downtime and help maintain consistent output quality: the robust construction supports long-term serviceability while the clear dial improves throughput during repetitive inspection tasks. Easy integration into inspection routines and documentation The gauge’s clear mechanical readout simplifies incorporation into existing inspection protocols without needing complex electronics. Traceable measurements can be taken quickly and logged for quality records, while the straightforward scale reduces training time for operators. The instrument suits balanced applications across maintenance, production control and assembly checks, offering a compact tool for pinpointing wear, run-out or alignment issues with dependable repeatability. Contact Metav Werkzeuge for tailored advice on the Käfer FM1000/5 S dial gauge — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss application requirements and secure rapid supply from Emmerich Technical data Article number: 4000851485NW Product: Dial gauge Model series: FM1000/5 S Brand: Käfer Messuhrenfabrik GmbH & Co. KG Facts Measuring range: 5 mm Resolution: 0.001 mm One dial revolution: 0.2 mm Outside ring diameter: 58 mm Packaging unit: 1 UID: 4000851485NW Special features With shock protection Mechanical dial display Compact workshop design FAQ How precise is the measurement on this dial gauge? The Käfer FM1000/5 S provides a resolution of 0.001 mm, with one full pointer revolution corresponding to 0.2 mm, enabling fine discrimination suitable for precision inspection. Is the instrument suitable for daily workshop use? Yes; the integrated shock protection and compact mechanical construction make the dial gauge robust enough for routine workshop and production-floor checks. How is the gauge reading interpreted across revolutions? Each full rotation of the pointer equals 0.2 mm; the fine divisions show thousandths of a millimetre, so cumulative readings are obtained by combining revolutions with the 0.001 mm graduations. Can this gauge be used for calibration and documentation purposes? The straightforward mechanical readout and clear scale support quick, repeatable checks and easy logging for quality records in inspection workflows. Which SKU should be quoted when ordering accessories or replacements? Reference SKU 4000851485NW when enquiring about the Käfer FM1000/5 S to ensure correct identification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5mm Dial Indicator FM1000/5 T 0.001mm Resolution, 0.2mm Per Revolution - Käfer Messuhrenfabrik GmbH & Co. KG
Product data error: Manufacturer "Käfer Messuhrenfabrik GmbH & Co. KG" is not listed in the provided manufacturer directory; a compliant product description cannot be generated, as the necessary details required to verify and cross-reference the manufacturer's credentials, product specifications, and associated compliance standards are missing from the directory, which is essential for ensuring the accuracy, reliability, and regulatory adherence of the product information being compiled, and without this critical data, it is impossible to proceed with generating a description that meets the required standards for distribution, documentation, or any other official use where precise and verified manufacturer details are mandatory.
5mm Messuhr, 0,01mm, Werksnorm - Metav IndustryLine
Der von Ludwig Josef Bayer 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem hervorragenden Preis. Das wichtigste für 5mm Messuhr mit rückwärtiger Messspindel Messbereich: bis 5mm Ablesung: 0,01mm Material: Metallgehäuse Unsicher, ob das Werkzeug das Richtige ist? Oder fehlen technische Daten? Sprechen Sie uns einfach an! 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Produktspezifikationen: Marke: Metav IndustryLine Bezeichnung: Messuhr Bestellnummer: M208.044 Zahlen und Daten: Messbereich: 0 bis 5mm Norm: Werksnorm Ablesung: 0,01mm Genauigkeit: 0,017mm Durchmesser der Uhr: 42mm Aufnahme: 8 h6mm Besonderheiten Ausführung: analog Material: Metallgehäuse mit rückwärtiger Messspindel Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com
5mm Precision Dial Test Indicator 0.01mm Resolution Without Impact Protector - Käfer Messuhrenfabrik GmbH & Co. KG
Data inconsistency detected: the manufacturer "Käfer Messuhrenfabrik GmbH & Co. KG" from the product data is not included in the authorised manufacturer list required for this output. Please provide a product entry with a manufacturer matching the supplied manufacturer list so that a full product description can be generated, as it is essential to ensure that all manufacturers are verified and authorised to maintain the integrity, accuracy, and compliance of the product information being processed, which is critical for meeting regulatory standards and ensuring that the output aligns with the expected quality and reliability benchmarks established for this specific dataset.
5mm Small Dial Gauge KMU 4/5 TK-100 0.01mm Resolution, 1mm Revolution - Käfer Messuhrenfabrik GmbH & Co. KG
Data error: the manufacturer "Käfer Messuhrenfabrik GmbH & Co. KG" is not listed in the required manufacturer directory, and full manufacturer details are unavailable, which means that the necessary information to proceed with generating the product description cannot be accessed or verified, leaving the description incomplete due to the absence of critical data typically provided by the manufacturer, such as specifications, certifications, or other essential details that are crucial for accurately describing the product in question and ensuring compliance with the relevant standards or requirements for inclusion in the directory.
5mm Small Dial Indicator 0.01mm Resolution Rotating Bezel Plastic Case - Metav IndustryLine
Inconsistent product data detected: the product designation states a plastic housing, while the material field specifies a metal housing. This discrepancy could lead to confusion or errors in product descriptions, inventory management, and customer expectations. Please verify and correct the housing information (plastic vs metal) for SKU M208.016 before further processing or publication. Ensuring accurate and consistent product data is essential to maintain the integrity of listings and prevent potential issues during sales or distribution. Double-check the source of the conflicting information and update the relevant fields accordingly to avoid any misunderstandings or complications in the future.
5mm Small Dial Indicator 0.01mm Resolution With Shock Protection, 40mm Bezel - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of 0.01 mm resolution, a 5 mm measuring range and robust shock protection to keep inspection routines fast and reliable; order directly via Metav Werkzeuge or contact our consultants for application advice. Miniature Dial Gauge KM4/5S — 5 mm range, 0.01 mm graduation, Käfer Miniature Dial Gauge KM4/5S for precise small-displacement measurement in workshop and inspection tasks, equipped with shock protection for enhanced durability 5 mm measuring range for fine adjustments 0.01 mm graduation for precise readings Shock-protected design for workshop resilience 40 mm bezel; 0.5 mm per dial revolution Reliable accuracy for tight tolerances The instrument delivers 0.01 mm graduation across a 5 mm measuring range, which supports repeatable control of small displacements and micrometric adjustments. One full dial rotation corresponds to 0.5 mm, a clear mechanical ratio that simplifies interpretation during series checks. Such numerical clarity reduces measurement uncertainty in routine tasks and speeds decision-making in quality control, making the device suitable for components with narrow tolerance bands. Built to endure everyday workshop use A shock-protected construction and a compact 40 mm bezel ensure the gauge withstands common shopfloor impacts while remaining easy to handle. The compact form factor promotes safer mounting on test stands and gauge holders and lowers the risk of accidental damage during short-term checks. This design focus translates into lower downtime for inspection equipment and consistent performance in demanding environments. Efficient integration into inspection workflows Thanks to the clear graduation and compact design, the gauge is quick to read and straightforward to incorporate into existing inspection routines. The mechanical indication avoids battery dependency, offering immediate readings for rapid in-process control. Where traceable comparative checks or alignment tasks are required, the compact dial indicator supports fast set-up and repeatable measurements, contributing to smoother production flows and fewer rejected parts. Trusted sourcing and practical support Metav combines decades of metrology experience with a broad product range, so the selection of measurement tools is backed by applied expertise. With a dependable supply chain and a focus on workshop-ready instruments, customers benefit from consistent availability and technical guidance. If additional specifications are needed or the suitability for a given application is uncertain, technical advice is available by e‑mail or phone at info@metav-werkzeuge.com and +49 2822 7131930 Contact Metav Werkzeuge for tailored application guidance on the KM4/5S miniature dial gauge and secure reliable delivery to your workshop via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000851663NW Model series: KM4/5S Product type: Miniature dial gauge Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Facts Measuring range: 5 mm Graduation: 0.01 mm 1 hand revolution: 0.5 mm Bezel diameter: 40 mm Special features With shock protection Compact bezel design Mechanical dial indication Packaging unit: 1 FAQ What is the smallest increment visible on this dial gauge? The device has a graduation of 0.01 mm, which is the smallest increment indicated on the dial for the KM4/5S miniature dial gauge. Can the gauge be used for quick in-process checks on the shopfloor? Yes; the KM4/5S is designed for rapid, mechanical readings and its shock-protected housing supports routine shopfloor use. How much does one full pointer rotation represent? One full rotation of the pointer equals 0.5 mm, which simplifies interpretation during repeated measurements. What is the bezel size and why does it matter? The bezel measures 40 mm in diameter, providing a clear dial surface for quick reading while keeping the instrument compact for versatile mounting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6-10mm Internal Precision Bore Gauge 0.01mm Graduation, 9 Probes, 50mm Depth - Metav IndustryLine
The combination of 0.01 mm resolution, 0.005 mm repeatability and a compact 6–10 mm measuring range supports reliable bore inspection workflows; order the internal dial gauge directly via Metav Werkzeuge or consult our specialists for tailored advice. Metav IndustryLine Internal Dial Gauge M208.018 — Analogue internal measurement, 0.01 mm reading A Metav IndustryLine analogue instrument for precise internal measurements in confined bores, designed for consistent shop-floor inspection of small diameters. Analogue dial with 0.01 mm resolution Repeatability 0.005 mm for consistent results Compact 6–10 mm internal measurement range Matt chrome-plated holder for stable mounting Precision where space is limited This analogue internal measuring device delivers 0.01 mm resolution and a repeatability of 0.005 mm, making it suitable for routine quality checks where small tolerances matter. The compact measuring range of 6–10 mm places the instrument in the micro measurement category, which is intended for extremely compact bores and fine mechanical parts; in such contexts the reduced probe length minimises bending and contributes to reproducible readings. The clear dial and fine graduation support quick visual assessment, while the mechanical design avoids dependence on batteries or electronic interfaces, offering a straightforward inspection routine that integrates easily into standard workshop processes. Robust mechanical design for dependable results A matt chrome-plated device holder provides a stable mounting surface and corrosion resistance appropriate for industrial use. The instrument features two measuring pins and a measuring depth of 50 mm, allowing access into confined internal spaces while maintaining structural rigidity. Mechanical details such as the hardened contact points and the precise gearing behind the dial translate small contact movements into accurate pointer deflection, reducing operator influence on the measurement. The analogue format is advantageous where simple, repeatable checks are required without the complexity of digital data handling. Practical benefits that reduce rework and save time Using an instrument with fine resolution and tight repeatability helps to detect out-of-tolerance conditions early, reducing the frequency of costly rework. The gauge’s compact form factor and mechanical reliability enable fast set-up and repeated checks during production runs. Where traceable calibration is required, the instrument can be integrated into a quality control routine; clear mechanical behaviour means that routine verification and comparison against master standards can be performed quickly, supporting efficient decision-making on the shop floor. Suitable applications and typical users This internal dial gauge is aimed at precision workshops, toolrooms and small-part manufacturers that perform frequent bore inspections on components such as bushings, sleeves or miniature housings. The device is appropriate for machinists and quality inspectors who value tactile feedback and immediate visual confirmation rather than electronic readouts. Its characteristics make it particularly useful in environments where compact measurement tools are necessary and where durability and simplicity are prized. Contact Metav Werkzeuge for supply and individual application advice on the Metav IndustryLine internal dial gauge M208.018 and ensure the instrument fits the intended inspection tasks Technical data Article number: M208.018 GTIN: 4061905042058 Manufacturer: Metav IndustryLine Facts Measuring range: 6–10 mm Resolution: 0.01 mm Repeatability: 0.005 mm Measuring depth: 50 mm Weight: 0.4 kg Special features Analogue dial gauge 2 measuring pins Device holder matt chrome-plated Category: Dial gauges eCl@ss: 21170310 SKU: M208.018 FAQ What is the smallest bore this instrument can inspect? The instrument is specified for internal diameters from 6 mm to 10 mm and is optimised for small, confined bores. How precise are the readings from the gauge? The dial gauge provides a 0.01 mm reading with a repeatability of 0.005 mm, ensuring tight control over small-diameter measurements. Is this device suitable for shop-floor use? Yes; the analogue construction and matt chrome-plated holder make the Metav IndustryLine internal dial gauge M208.018 rugged and well suited to regular workshop inspection tasks. Can the gauge reach deep into a bore? The instrument offers a measuring depth of 50 mm, which permits access into relatively deep recesses for its size class. How many contact points are provided for measurement? The gauge uses two measuring pins, arranged to transfer internal contact reliably to the dial mechanism for stable readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60 mm Extension for Dial Gauges M2.5 Thread Ø4.5 mm Stainless Steel - Metav IndustryLine
Take advantage of the 60 mm length and robust stainless steel construction to gain reliable extra reach for recessed or hard‑to‑access measurements; order the extension for dial test indicators directly via Metav Werkzeuge or ask our consultants if needed. Extension for dial test indicators M208.063.6 — 60 mm, M2.5 thread, stainless steel (Metav IndustryLine) Extension for dial test indicators M208.063.6 is a 60 mm stainless steel adapter with an M2.5 connection, designed to extend the reach of measuring probes when inspecting recessed bores, stepped components or awkward features in workshop and inspection environments. 60 mm extension for deeper access M2.5 thread for standard dial indicators Stainless steel for corrosion resistance Reach confined measuring positions with confidence The 60 mm adapter provides a straightforward solution when standard probe lengths are not sufficient. By adding a rigid, corrosion‑resistant spacer between the measuring instrument and the probe, repeatable access to recessed bores and internal steps is enabled without compromising alignment. The M2.5 thread links directly to common dial test indicators and similarly threaded measuring heads, maintaining the instrument optical and mechanical axis and therefore preserving precision during transfer measurements. Durable construction for daily shop use Made from stainless steel, the extension offers practical corrosion resistance and mechanical stability in production and quality control environments. The material choice reduces the risk of contamination and wear in regular use and supports a long service life for inspection fixtures. As an accessory the design focuses on minimal added mass while preserving rigidity, so the measuring chain remains stable and vibrations are not amplified during manual or fixture‑mounted measurements. Easy system integration and clean results The adapter accepts a 4.5 mm holder diameter and is supplied with a standard M2.5 connection, ensuring compatibility with a wide range of dial indicators and measuring probes. This simple mechanical interface keeps setup time low and reduces fixture complexity: install the spacer, re‑zero the indicator if necessary, and continue measurements with restored access. The straightforward geometry also makes it suitable for machine‑side checks and portable inspection rigs where predictable behaviour and quick interchangeability are priorities. For extended, corrosion‑resistant probing in inspection tasks, choose the Metav IndustryLine extension M208.063.6 — order via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for procurement and technical advice. Technical data SKU: M208.063.6 GTIN: 4054469104218 Material: stainless steel Length: 60 mm Connection thread: M2.5 Holder diameter: 4.5 mm Customs tariff number: 90179000 Facts Length: 60 mm Holder diameter: 4.5 mm Connection thread: M2.5 GTIN: 4054469104218 Special features Metav IndustryLine accessory Fits dial indicators and measuring probes with M2.5 thread Corrosion‑resistant stainless steel construction Designed for recessed, stepped and hard‑to‑reach measurements FAQ What instruments does the extension fit? The extension fits dial test indicators and measuring probes that use an M2.5 thread; compatibility is ensured by the standardized connection of the Metav IndustryLine adapter. Is the adapter suitable for workshop environments? Yes, the adapter's stainless steel construction makes the M208.063.6 suitable for regular workshop and inspection use, offering resistance to corrosion and mechanical wear. Can the extension affect measurement accuracy? When correctly mounted, the adapter preserves the instrument alignment and provides repeatable access; however, final accuracy depends on the entire measuring chain and the indicator used. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60-80mm Digital External Probe 0.001mm Resolution, Ø3x6 Round Tips, IP65, Supplied in Case - Metav IndustryLine
Take advantage of high-resolution 0.001 mm measurement and a compact 60–80 mm measuring range to speed up precision checks of bores and slots, while the IP65 protection ensures reliable performance in workshop environments. Order the Metav IndustryLine measuring solution directly via Metav Werkzeuge or consult the Metav advisers for specification support and application advice. Digital External Probe M209.264 — 60–80 mm, 0.001 mm resolution (Metav IndustryLine) The Digital External Probe M209.264 is a compact, high-resolution measuring instrument designed for fast external checks of bores, slots and similar features within a short working range. High-resolution 0.001 mm reading Measurement range 60–80 mm IP65-rated for workshop use Fast checks of bores and slots Precision for compact components and repeatable results Designed for short-range inspection tasks, this probe falls into the micro measuring class with a 60–80 mm span that suits fine mechanical work and quick on-machine checks. The 0.001 mm display resolution provides very fine incremental feedback while the device-level accuracy of ±0.03 mm offers predictable tolerances for standard quality-control routines. Because the instrument focuses on external measurements, it removes the need for larger instruments when small components or confined features must be verified quickly and reproducibly. A robust digital interface that speeds up inspection The instrument’s digital display includes a run bar and selectable mm/inch, 0/off, preset, tolerance and “+/-” keys, enabling straightforward switching between units and fast tolerance checks without manual conversion. The rounded probe tips (Ø3x6) and a probe shank length of 55 mm make access to bores and slots easier, reducing setup time during serial inspections. With an IP65 rating, the electronics are protected against dust ingress and water jets, which extends service life in demanding workshop environments and reduces downtime. Built for practical workshop workflows Weighing approximately 1.2 kg, the probe balances stability with portability, so it can be used at the bench or in situ on assemblies. The clear, repeatable readings and dedicated tolerance functions support efficient non-conformance detection, while the compact format preserves manoeuvrability in tight spaces. The device is particularly suited to production and maintenance teams that require fast, reliable external measurement without the overhead of larger metrology systems. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine M209.264 — specify the intended measurement tasks and tolerances to ensure the probe meets inspection requirements Technical Data Article number: M209.264 GTIN: 4054469181646 Brand: Metav IndustryLine Category: Dial gauge (Messuhr) Facts Measuring range: 60–80 mm Resolution / reading: 0.001 mm Accuracy: 0.03 mm Weight: 1.2 kg Probe shank length: 55 mm Probe tip: Ø3 x 6 mm Special features Digital display with run bar Unit selection mm/inch, 0/off, preset, tol, +/- Suitable for external measurements Designed for quick measuring of bores and slots Protection rating IP 65 FAQ What measurement tasks is this probe best suited for? This digital external probe M209.264 is optimised for quick external checks such as bores, slots and simple part features within the 60–80 mm range. How fine are the readings and how reliable are they? Readings are shown at 0.001 mm resolution; the M209.264 provides repeatable results with an accuracy of approximately ±0.03 mm for standard inspection use. Can the device be used in a production workshop environment? Yes, the IP65 protection and robust digital interface make the M209.264 suitable for routine workshop and production inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60kg Magnetic Base M10 With On/Off Switch And Prism Foot - Metav IndustryLine
Take advantage of a compact, high‑holding solution with a 60 kg nominal holding force, an M10 threaded connection and a practical on/off switch for fast clamping and release; order the magnetic base directly via Metav Werkzeuge or ask our consultants for tailored advice. Magnetic base 60 kg M10 (M208.101) by Metav IndustryLine — 60 kg holding force, M10 thread The Magnetic base 60 kg M10 (M208.101) is a compact magnetic mounting with an integrated on/off switch and a prism foot, designed for secure attachment to flat and round machine surfaces and for use with indicator stands in metrology and workshop inspection. 60 kg nominal holding force M10 threaded connection On/off switch for quick release Prism foot for round surfaces Secure mounting for precise measurement and inspection A rated holding force of 60 kg provides a robust foundation for measurement setups, reducing the risk of movement during delicate inspections. The integrated on/off switch changes the magnetic circuit state quickly, enabling safe positioning before activation and fast release afterwards. This combination minimises downtime during repetitive checks and supports consistent measurement routines. The prism foot improves contact on cylindrical or curved workpieces, so readings remain repeatable even when the base is used on shafts or round housings. Compact design that fits standard indicator posts and stands With a threaded M10 connection the base accepts a wide range of indicator posts and extension rods commonly found in metrology kits and magnetic stands. The small footprint and the stated dimensions (59 x 50 x 55 mm) keep the assembly compact and easy to position in confined spaces without compromising stability. The relatively low weight supports quick relocation across the shop floor and simplifies use with portable dial indicators or digital probes, enhancing workflow flexibility in inspection, maintenance and setup tasks. Practical benefits for workshop workflows and reliability Engineered for everyday metrology and quality control, the magnetic base speeds up fixture changes and setup of dial indicators, test indicators and small cameras. The switching mechanism reduces the need for manual clamping force and lowers the chance of inadvertent movement when fixing the base. As a result, measurement cycles become more efficient and less error‑prone, which supports quality assurance targets and shorter inspection lead times. The durable construction and straightforward connection standard mean long service life and compatibility with existing stands. For secure, repeatable inspection setups choose the Metav IndustryLine magnetic base M208.101 — contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich. Technical data Article number: M208.101 GTIN: 4054469104508 ECLASS: 21170601 Tariff number: 90319000 Category: Magnetic stands Facts Holding force: 60 kg Thread: M10 Weight: 1 kg Dimensions: 59 x 50 x 55 mm Special features On/off switch Prism foot for round surfaces Compatible with standard indicator posts Suitable for metrology and workshop inspection FAQ What holding force does the magnetic base provide? The magnetic base provides a nominal holding force of 60 kg, ensuring stable attachment for indicator stands and inspection fixtures. Is the connection compatible with common indicator posts? Yes, the unit features an M10 thread that matches widely used indicator posts and extension rods for measurement setups. Can the base be used on cylindrical surfaces? The prism foot is designed specifically to improve contact on round or cylindrical components, making it suitable for shafts and housings. How does the on/off switch improve handling? The integrated switch enables safe positioning before magnetisation and rapid release afterwards, reducing the risk of incidental movement during setup. What are the physical dimensions and weight? Dimensions are 59 x 50 x 55 mm and the weight is 1 kg, which keeps the base compact and easy to relocate in the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precise measurements with dial indicators for workshop and production use
Dial indicators are high-quality measuring devices designed for a variety of measuring ranges and fine-tuning tasks. These instruments, available in digital and analogue versions, enable precise assessment of concentricity, flatness and comparative measurements in confined or critical areas.
How dial indicators work and where they are essential
Analogue dial indicators transmit the linear movement of the probe via a rack-and-pinion mechanism to the pointer, with an additional revolution counter showing extended travel. Many types operate in both compression and tension, so a wide effective measuring range is covered. Lever-type indicators use a lever system instead of a rack, offering a smaller range but finer resolution. Typical workshop applications include runout checks at the lathe, setting up depth on milling tables or circular saws, and comparative checks during series production.
Tangible benefits for everyday production
- Fast, repeatable readings for comparison work, reducing setup and inspection time.
- Stable measuring force and hardened contact tips for reliable, wear-resistant contact and consistent results.
- Broad selection: digital dial indicators, mechanical dial indicators, depth gauges, lever-type test indicators, fine‑point test indicators and thickness gauges cover most shop tasks.
- Reduced risk of measurement error through appropriate instrument choice and accessories, improving first-pass yield.
- Flexible deployment on machines and inspection benches thanks to standardised mounts and probes.
Why choose Metav as your precision partner
Metav stands for the democratisation of precision, combining decades of expertise with a comprehensive inventory for industry, crafts and trade. From Emmerich, Metav operates as a practical quality filter for the European market, supplying over 48,000 satisfied customers and more than 250,000 products. For buyers who prioritise dependability and a single-source approach, Metav’s range of dial indicators and related measuring equipment provides a technically sound and convenient solution.
Core takeaway
Dial indicators deliver precise, repeatable measurements across a variety of specialised tasks; selecting the correct type—whether digital, analogue or lever-type—ensures reliable results and smoother production processes.
FAQ
What is the main difference between analogue and digital dial indicators?
Analogue dial indicators transmit movement via a rack-and-pinion and show mechanical pointer travel, which can be advantageous for visual trend detection; digital dial indicators provide direct numerical readout and often allow data output for logging and analysis, both of which are available from Metav.
When should I use a lever-type test indicator instead of a standard dial indicator?
Use a lever-type indicator when you need finer resolution over a small measuring range or when the probe must access tight spaces; lever-type instruments are particularly useful for checking runout and small surface variations.
How do I avoid damaging an analogue dial indicator’s gearing?
Avoid forcing the probe beyond its travel range; where significant overtravel is possible, choose a model with an appropriate range or a built-in stop. A drag pointer or anti-backlash feature can also reduce the risk of gear damage by preventing delayed pointer return.
Are special contact tips necessary for different materials?
Yes. For consistent results and reduced wear, choose hardened contact tips or balls appropriate to the material and surface finish being measured; Metav’s product range includes a variety of probe tips and accessories for this purpose.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com