Precision dial indicators for accurate length and runout checks
Dial indicators and related gauges provide precise measurement of small lengths and deviations, serving applications such as concentricity, flatness and comparison checks on lathes and milling machines, and offering both digital and analog options to suit different measuring ranges. These instruments are used with appropriate accessories for tasks like depth measurement or runout testing and feature hardened contact faces or balls for reliable contact; typical variants include dial indicators, test indicators and depth gauges. Analog types transmit spindle movement via rack and pinion to the pointer and may include a drag pointer to prevent gear damage, while digital versions give straightforward numeric readouts for quick interpretation. Using these gauges improves setup accuracy, process control and the repeatability of measurements in metalworking and workshop environments.
60kg Magnetic Base M8 With On/Off Switch And Prism Foot - Metav IndustryLine
Take advantage of the combination of firm magnetic anchoring and compact handling for reliable inspection set-ups; the 60 kg nominal holding force and M8 threaded stud ensure fast, reproducible fixturing for measurement tasks. Order the magnetic base directly via Metav Werkzeuge or ask our consultants if needed. Magnetic Base 60 kg M8 — switchable magnetic mount with prism foot (Metav IndustryLine) The Magnetic Base 60 kg M8 is a compact, switchable holding device for securing indicators and fixtures during inspection and workshop measurement tasks. 60 kg nominal holding force M8 threaded stud for universal mounts Integrated on/off switch and prism foot Stable anchoring for precision inspection A firm magnetic anchor is essential for repeatable measurement. The 60 kg nominal holding force provides a dependable contact to ferrous surfaces, reducing micro‑movement during readings and improving traceability of results. Fitted with an M8 threaded stud, this magnetic mount integrates with common indicator stems and articulated holders used across metrology benches, enabling quick set‑ups and minimising non‑productive time. The result is a measurable increase in workflow efficiency where consistent fixturing matters. Easy operation and versatile contact geometry The integrated on/off switch simplifies positioning: the base can be released for adjustment and re‑engaged without sliding the device across the workpiece, which protects delicate surfaces. The prism foot gives a secure seating on cylindrical parts, preventing lateral slip when measuring shafts or round housings. Compact dimensions of 59 x 50 x 55 mm and a mass of 0.95 kg make handling straightforward, while the design supports rapid repositioning in tight inspection cells. Workshop compatibility and practical benefits Designed for routine shop and inspection use, the magnetic mount connects directly to standard stands and holders via the M8 interface, supporting a broad range of indicator types and fixtures. Its compact footprint preserves access to the component and makes it suitable for fixtures with limited clearance. By reducing set‑up time and improving fixturing stability, the device contributes to lower rework rates and smoother production control in maintenance, quality assurance and assembly operations. Choose the Metav IndustryLine magnetic base for dependable anchoring in your metrology workflow and contact Metav Werkzeuge for ordering or technical advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M208.100 GTIN: 4054469104492 Tariff number: 90319000 Facts Holding force: 60 kg Thread: M8 Dimensions: 59 x 50 x 55 mm Weight: 0.95 kg Special features Integrated on/off switch Prism foot for cylindrical parts Suitable for magnetic stands and indicator mounting Category: Magnetstative FAQ How strong is the magnetic holding force and what does it mean in practice? The magnetic base provides a 60 kg nominal holding force; in practice this ensures stable fixture contact on ferrous surfaces for consistent measurement and reduced deflection during indicator readings. Can the base be used on round shafts and how is it prevented from slipping? Yes. The prism foot is designed to seat cylindrical parts securely, so the magnetic base holds round components without lateral movement when the magnet is engaged. Which mounting thread is fitted and which accessories will attach? The unit is fitted with an M8 threaded stud, compatible with standard indicator stems, articulated holders and many universal mounts used in metrology benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm Depth Gauge Bridge For Dial Indicator 63 x 16mm, 8mm Mount, Ground And Lapped Measuring Faces - Metav IndustryLine
Benefit from compact, repeatable depth measurement thanks to the 63 mm working depth, a rigid 63 x 16 mm bridge profile and precision-ground contact faces that ensure consistent readings; order the depth measuring bridge directly via Metav Werkzeuge or ask our consultants if needed. Depth measuring bridge for dial gauge, 63 x 16 mm, Ø 8 mm mount — Metav IndustryLine A matt-chrome-plated depth measuring bridge for dial gauges with an 8 mm mount, intended for confined fixtures and precise depth checks in workshop and inspection environments. Depth 63 mm for compact setups 63 x 16 mm rigid bridge design Ø 8 mm mounting for dial gauges Ground and lapped measuring faces Repeatable depth checks where space is tight The matt-chrome-plated bridge is engineered for repeatable depth measurement in cramped work areas. A 63 mm measuring span combined with a narrow 63 x 16 mm profile reduces obstruction around the test piece while maintaining sufficient rigidity. The ground and lapped measuring faces provide low friction seating and minimise measurement scatter, which translates into fewer retests and faster inspection cycles for production and maintenance tasks. Robust finish and contact geometry for longer life A corrosion-resistant surface finish and carefully prepared contact faces ensure long-term stability. The matt chrome plated surface resists workshop contaminants and the machined contact areas remain flat under normal handling, supporting consistent probe seating. With an overall height of 34 mm and a compact mass, the bridge offers the mechanical stiffness required for reproducible results without adding significant bulk to the test set-up. Simple integration with standard dial gauges and fixtures Designed for compatibility with all dial gauges that use an Ø 8 mm mounting, the bridge slots directly into existing indicator stands and fixtures. The accessory supports quick mounting and accurate alignment, reducing set-up time on the shop floor. As a metrology accessory it complements manual inspection benches and quality-control rigs where a compact, stable depth reference is required. Practical workshop benefits and operation clarity Measured parts are easier to position against the broad, flat faces, which improves throughput and reduces operator fatigue. The modest weight (0.3 kg) makes the bridge straightforward to handle while still providing the necessary mass for contact stability. Clear, objective construction means the device remains a reliable tool for routine depth checks and supplementary inspection tasks in metalworking and assembly. Contact Metav Werkzeuge today to confirm compatibility with specific dial gauges and to arrange supply directly from our Emmerich warehouse Technical data Article number: M208.061.1 GTIN: 4061905042577 Brand: Metav IndustryLine Facts Weight: 0.3 kg Overall height: 34 mm Bridge dimensions: 63 x 16 mm Working depth: 63 mm Mounting diameter: Ø 8 mm Special features Finish: matt chrome plated Measuring faces: ground and lapped Suitable for all dial gauges with 8 mm mount Category: accessory for inspection equipment FAQ What mounting size is required for this depth bridge? The depth measuring bridge fits dial gauges with an Ø 8 mm mounting; compatibility is stated for devices using an 8 mm stem. Can this bridge be used in a production inspection fixture? Yes, the rigid 63 x 16 mm profile and flat, lapped faces make the bridge suitable as a repeatable reference in fixtures and inspection benches. What material and finish does the bridge have? The bridge is matt chrome plated with ground and lapped measuring faces to provide corrosion resistance and stable contact geometry. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
65mm Extension For Dial Indicators M2.5 Thread Ø4.5mm Stainless Steel - Metav IndustryLine
Benefit from the stainless steel construction, a 65 mm reach and secure M2.5 mounting for reliable access to recessed measuring points; order the extension directly via Metav Werkzeuge or ask our consultants if needed. Extension for dial indicators — 65 mm reach, M2.5 thread (Metav IndustryLine) The Extension for dial indicators delivers a compact stainless-steel spacer with an M2.5 mounting thread and a slim Ø 4.5 mm shank, designed to extend the reach of standard workshop dial indicators for confined or recessed measurement tasks. 65 mm extension length for recessed access M2.5 mounting thread for standard indicator spindles Ø 4.5 mm shank for slim fixture clearance Corrosion-resistant stainless steel construction Precise reach for confined measurement points A short, rigid extension can make the difference when measuring inside recesses or behind clamps. The 65 mm length provides sufficient reach while keeping lateral deflection minimal; combined with the stainless steel body, the extension offers stable, repeatable positioning. Its slim Ø 4.5 mm shank slips into tight fixtures and maintains alignment, reducing the risk of off-axis loads that compromise reading accuracy. This accessory is intended to support reliable contact between the indicator stylus and the workpiece, improving throughput in inspection routines without complex fixturing. Secure mounting and workshop compatibility The metric M2.5 thread matches the common mounting interfaces found on many dial indicators and holders, ensuring straightforward installation on existing setups. The threaded connection gives mechanical security under light probing forces and allows quick changes between probes or extensions. Lightweight at approximately 0.01 kg, the part adds minimal inertial load to the measuring chain, preserving the indicator’s responsiveness. Use in quality-control benches, assembly jigs or mobile inspection kits where compact, repeatable extensions are required. Durable accessory from a precision partner Manufactured in corrosion-resistant stainless steel, this accessory resists workshop contamination and stands up to repeated handling. As part of the Metav IndustryLine range, the extension benefits from a supplier ecosystem focused on dependable metrology tools and accessories that simplify procurement and reduce downtime. The slim profile and robust finish make it a practical choice for maintenance departments, toolrooms and inspection stations seeking a low-complexity way to access difficult measuring points. For precise reach adjustments and workshop-ready compatibility, choose the Metav IndustryLine extension and contact Metav Werkzeuge in Emmerich for tailored advice or ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M208.063.F GTIN: 4054469104300 eClass: 21170613 ETIM: EC002219 Customs tariff number: 90179000 Facts Length: 65 mm Weight: 0.01 kg Thread: M2.5 Shank diameter: Ø 4.5 mm Special features Material: stainless steel Accessory for dial indicators and holders Slim profile for confined spaces Corrosion-resistant finish FAQ Which indicators is this extension compatible with? The extension for dial indicators is compatible with indicators and holders that accept an M2.5 mounting thread; the Metav IndustryLine accessory M208.063.F fits standard workshop dial indicator spindles. Does the extension affect measurement accuracy? When used within its design limits, the stainless-steel extension maintains stable contact and minimal deflection; correct fixturing and alignment ensure that the accessory does not introduce significant additional measurement error. What material is the extension made from? The part is produced from stainless steel, offering corrosion resistance and durable handling in workshop environments. Is the extension suitable for mobile inspection kits? Yes, the lightweight design (approx. 0.01 kg) and slim Ø 4.5 mm shank make the accessory well suited to portable inspection kits and compact test setups. Can the extension be used with indicator holders and adaptors? The M2.5 thread allows direct mounting to many holders and adaptors designed for dial indicators; compatibility should be checked against the holder’s thread specification or mounting interface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6mm Ball Measurement Insert Steel For Dial Gauges Thread M2.5 - Käfer Messuhrenfabrik GmbH & Co. KG
Reliable measuring insert featuring a 6 mm steel ball tip and standard M2.5 thread for consistent contact with dial indicators; robust steel construction ensures long service life and repeatable readings. Combine compatibility, durability and compact design for dependable shop‑floor measuring tasks. Order the measuring insert directly via Metav Werkzeuge or request advice from our consultants. Käfer measuring insert L 6 mm — ball tip, M2.5 thread, steel Käfer measuring insert L 6 mm is a ball‑type measuring tip in steel, intended for direct mounting on dial indicators to provide a stable contact point for comparative and workshop measurement tasks. 6 mm ball tip for stable contact M2.5 thread for standard dial indicators Steel construction for high wear resistance Compact insert for confined measuring points Precise contact and compatible mounting for reliable readings The ball‑shaped tip with a 6 mm diameter delivers a defined contact area that minimises measurement variability when engaging surfaces. Fitted with a standard M2.5 thread, the insert is compatible with the majority of dial indicators and comparative gauges used in workshop metrology, ensuring straightforward replacement or upgrade. The compact geometry of the probe reduces the influence of stray forces and simplifies access to tight measuring points, supporting consistent repeatability across short production runs and inspection tasks. Durable steel construction explained for long service life Manufactured in steel, the measuring tip offers wear resistance and mechanical stability under normal contact loads; the material choice helps preserve the spherical geometry during repeated use. The ball contact spreads the load over a small, consistent area, reducing local deformation and thus maintaining accuracy over time. For applications where surface finish or abrasive wear is an issue, the steel body provides a cost‑effective balance between durability and machinability, while the proven shape supports dependable tactile feedback for mechanical dial mechanisms. Practical uses and benefits in workshop and inspection environments Designed as a measuring insert for dial indicators, the component is particularly useful for comparative checks, run‑out assessments and fixture inspections where a precise point contact is required. Its small footprint and standard thread enable rapid interchangeability, helping to reduce setup time and increase throughput in repetitive tasks. For customers requiring specification confirmation or integration guidance, detailed technical information is available on request to ensure the insert meets the intended application and measuring chain requirements. Contact Metav Werkzeuge today for expert advice and to secure the Käfer 6 mm measuring insert with M2.5 thread—phone +49 2822 7131930 or email info@metav-werkzeuge.com for reliable supply from Emmerich Technical data Article number: 4000851675NW Product type: Measuring insert Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Facts Length: 6 mm Thread: M2.5 Packaging unit: 1 Special features Ball‑shaped tip Material: steel For dial indicators Form: ball FAQ What thread size is used for mounting the insert? The insert uses an M2.5 thread for direct mounting on compatible dial indicators and comparative gauges. Is the contact tip made of hardened material suitable for repeat use? The tip is manufactured in steel, providing good wear resistance for regular workshop measurement routines. Which measuring tasks are the ball tip best suited for? The 6 mm ball tip is ideal for defined point contact in comparative checks, run‑out measurements and confined inspection locations. Can this insert be used with most dial indicator brands? With its M2.5 thread and standard ball form, the insert is compatible with the majority of dial indicators that accept M2.5 mounting. How is the insert supplied and identified? The component is supplied as a single unit and identified by article number 4000851675NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6mm Ball Precision Insert Carbide For Dial Gauges M2.5 Thread - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of precise contact geometry and robust carbide construction for consistent gauge readings and long service intervals; benefit from compact probe length and standard M2.5 mounting for straightforward integration. Order this measuring insert directly via Metav Werkzeuge or consult our advisors for compatibility support. Measuring insert 6 mm — Ball tip, M2.5 thread, carbide (Käfer) The Measuring Insert 6 mm Ball Tip, M2.5, Carbide is a precision gauge insert for dial indicators, engineered for repeatable contact measurement in tight or detailed inspection tasks. Carbide ball tip for high wear resistance 6 mm probe length for confined access M2.5 thread for standard indicator mounting Designed for repeatable, traceable readings Consistent readings through optimised contact geometry The combination of a ball tip and rigid shank provides reproducible contact conditions, which is essential when comparing multiple components or performing batch inspections. The spherical contact surface minimises orientation sensitivity and converts irregular surface variations into stable measurement values. This results in improved precision and reduced measurement scatter compared with blunt or worn tips, supporting quality control routines and statistical process control in the workshop. Compact design that reaches confined features A 6 mm probe length delivers a compact footprint for measurements in narrow bores, small parts or close-packed assemblies. The short reach reduces lever arm and flex, improving stability during touch-downs and enabling accurate readings where longer probes would deflect. The standard M2.5 thread allows direct attachment to most dial indicators and comparators, simplifying retrofitting and keeping tool inventories minimal. Durable carbide construction for extended service life Manufactured from carbide, the insert offers excellent wear resistance for high-cycle inspection use. Carbide resists abrasion far better than tool steels, which lowers replacement frequency and maintains consistent tip geometry over time. The material choice reduces downtime for tip changes and contributes to a lower total cost of ownership through sustained performance in abrasive or hard-surfaced measurement tasks. Ready integration with standard metrology equipment Designed for dial indicators and similar comparators, the insert mates with common indicator fittings and supports a wide range of routine measurement tasks, from dimensional checks to comparative gauging. The robust mounting and standardised thread facilitate reliable seating and repeatability, making it suitable for production lines, inspection benches and service workshops that require dependable, easy-to-install metrology accessories. For durable, carbide-tipped measurement accuracy, contact Metav Werkzeuge to request this Käfer measuring insert or to receive application advice by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data SKU: 4000851687NW Product type: Measuring insert Label: Messeins.L.6mm KGL M2,5 HM z.Messuhren KÄFER Facts Probe length: 6 mm Thread: M2.5 Form: Ball Features Material: Carbide Application: For dial indicators Packaging unit: 1 Manufacturer name (data): Käfer Messuhrenfabrik GmbH & Co. KG FAQ What materials is the measuring insert suitable for? The Measuring Insert 6 mm, Ball Tip, M2.5, Carbide is intended as a general-purpose contact tip for dial indicators and performs well across a variety of materials where a hardened, wear-resistant tip is required. How is the insert mounted to a dial indicator? The insert uses a standard M2.5 thread for mounting; the Measuring Insert 6 mm, Ball Tip, M2.5, Carbide screws into the indicator stem in the same way as other M2.5-mounted tips. Will the carbide tip affect surface marking on delicate parts? The spherical geometry of the Measuring Insert 6 mm, Ball Tip, M2.5, Carbide reduces concentrated pressure compared with sharp contacts, but care is recommended on very soft surfaces where any hardened tip could leave impressions. Is this insert suitable for repeatability in production inspection? Yes, the carbide composition and ball contact ensure stable contact conditions and repeatable measurements, making the Measuring Insert 6 mm, Ball Tip, M2.5, Carbide well suited to routine production gauging. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6mm Ball Precision Insert Plastic For Dial Gauges Ø 3mm, Length 6mm - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of precise Ø 3 mm contact, compact 6 mm length and M2.5 mounting for reliable, repeatable readings — a practical choice for fine metrology tasks. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice and compatibility checks. Käfer measurement insert — Ball probe Ø 3 mm, M2.5 thread (plastic) A Käfer measurement insert is designed as a 3 mm ball-tip probe with M2.5 thread for use on dial indicators, providing gentle contact for delicate surfaces Ball-tip probe Ø 3 mm, length 6 mm Thread M2.5 for dial indicator mounting Plastic construction for gentle contact Precision insert for repeatable readings Gentle contact for sensitive measurement surfaces The ball-shaped probe head delivers consistent tactile contact while minimising surface marking on delicate parts. Built from plastic, the insert reduces the risk of abrasion and is particularly suitable for soft or polished materials where metal tips could cause damage. The small Ø 3 mm ball concentrates contact force into a predictable area, aiding stable probe-to-workpiece interaction and improving repeatability during comparative checks. For workshops and inspection benches requiring non-marring engagement, this design offers a practical blend of care and control. Compact dimensions and robust mounting for tight setups With a 6 mm effective length and an M2.5 thread, the probe insert integrates easily into tight indicator stems and accessory holders commonly used in precision measurement. The short profile reduces lever play and helps preserve the alignment of the measuring chain, which in turn supports precise indication transfer. The standard M2.5 interface ensures compatibility with many dial indicators and accessories, simplifying installation and replacement without the need for bespoke adaptors. Repeatable readings that speed up inspection workflows Engineered for stability, the ball-tip geometry and plastic construction deliver consistent contact conditions across repeated measurements. This predictability reduces scatter in comparative checks and supports faster decision-making on the shop floor. Where throughput and accuracy matter, the insert assists technicians in achieving uniform results with less adjustment time. The component’s simple form factor also makes it a low-maintenance option for routine use in assembly, QA sampling and first-article inspections. Practical compatibility and workshop guidance The insert is intended for use with dial indicators and related measuring heads where a small ball tip is required. Its plastic composition and ball form suit applications on fragile finishes and soft alloys alike. If additional technical details are required to confirm fitment with a specific indicator model, the Metav contact channels are available for clarification. For customers consolidating metrology supplies, this insert represents an economical, low-risk component to keep as part of a standard inspection kit. Contact Metav Werkzeuge today to confirm compatibility and order the Käfer measurement insert for precise, non-marring measurements at your inspection bench Technical data Article number / SKU: 4000851674NW UID: 4000851674NW Product type: Measurement insert Brand: Käfer Messuhrenfabrik GmbH & Co. KG Facts Diameter: 3 mm Length: 6 mm Thread: M2.5 Packaging unit: 1 Special features Material: Plastic Form: Ball tip Intended for: Dial indicators / measuring heads Compact design for constrained spaces FAQ What materials is this insert suitable for? The insert’s plastic ball tip is suitable for delicate surfaces and soft metals, providing gentle contact that reduces marking during measurement. Which indicator types accept the M2.5 thread? Many dial indicators and accessory stems use an M2.5 thread; the insert is supplied with an M2.5 mounting to match common indicator mounts. How does the Ø 3 mm ball affect measurement stability? A 3 mm ball concentrates contact at a defined point, improving repeatability and reducing variations in comparative measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6mm Ball Probe For Test Indicator Thread M2.5 - Metav IndustryLine
The compact 6 mm ball contact combined with an M2.5 threaded connection makes this measuring insert a practical choice for straightforward comparative and point measurements; benefit from reliable compatibility with dial indicators and quick, tool-free replacement when needed. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. Measuring insert M208.169 – 6 mm ball contact, M2.5 thread (Metav IndustryLine) The Measuring insert M208.169 is a precision contact point for dial indicators, designed to provide stable point contact for dimensional checks and comparative measurements in workshop and inspection settings. 6 mm spherical contact tip M2.5 threaded connection For dial indicators with M2.5 interface Precise point contact for repeatable checks The 6 mm ball contact delivers a clearly defined point of contact that helps reduce measurement variability when comparing features or checking runout. Matched to the industry-standard M2.5 thread, the insert allows fast replacement of worn tips and ensures consistent geometry at the measurement point. This stability supports efficient inspection routines by reducing rework and increasing throughput in repetitive tasks. Quick compatibility with existing dial indicators Designed specifically for dial gauges with an M2.5 mounting, the insert simplifies tooling logistics by offering direct compatibility with a broad range of contact stems. The threaded M2.5 connection provides a secure mechanical fit that requires minimal setup, enabling rapid tool changes during multi-operation measuring sequences. Clear compatibility reduces downtime and the need for adapters, making the accessory well suited to busy workshop environments. Practical accessory for everyday metrology tasks As an accessory in the metrology toolbox, this measuring insert supports a variety of routine uses—from comparative checks to spot measurements on components and assemblies. The spherical geometry aids in locating contact on curved or slightly angled surfaces, improving contact reliability without complex fixturing. Labelled and traceable via SKU and GTIN, the insert fits seamlessly into organised inspection workflows and stock management systems. Contact Metav Werkzeuge for tailored advice on fitment or to place an order with our Emmerich team Technical data Article number: M208.169 GTIN: 4054469105208 Customs tariff number: 90319000 Weight: 0.1 kg Manufacturer: Metav IndustryLine Core technical data Ball diameter: 6 mm Thread: M2.5 Suitable for: Dial indicators with M2.5 connection Special features Spherical contact tip for point measurements Threaded attachment for rapid replacement Accessory for precision measuring instruments FAQ What dial indicators are compatible with this insert? The measuring insert M208.169 is compatible with dial indicators that accept an M2.5 threaded contact point; check the indicator's stem thread before fitting. Can the 6 mm ball contact be used on curved surfaces? Yes, the 6 mm spherical geometry of this contact point is suitable for making repeatable contact on slightly curved or angled surfaces during comparative and spot checks. Is the insert supplied with traceability information? The SKU M208.169 and GTIN 4054469105208 allow clear identification within inspection and inventory systems; further traceability can be provided through Metav Werkzeuge on request. How is the insert mounted and replaced? The insert screws into the indicator's M2.5 threaded socket and can be replaced by hand or with light pliers if required; no special tools are necessary for standard workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70 mm Extension Rod for Dial Indicators M2.5 Thread Ø4.5 mm Stainless Steel - Metav IndustryLine
Extend reach and maintain measuring integrity with a corrosion‑resistant stainless steel extension that adds 70 mm and features an M2.5 attachment thread and a Ø 4.5 mm shank; ideal for tight fixtures and compact gauges. Order directly via Metav Werkzeuge or consult our specialists for integration advice and availability. Extension for Dial Indicators M208.063.7 — 70 mm stainless steel, M2.5 thread (Metav IndustryLine) Extension for Dial Indicators M208.063.7 provides a compact reach extension for dial gauges and dial indicators, designed to give a reliable 70 mm increase in measurement reach where space is restricted. 70 mm stainless steel extension M2.5 thread for standard dial indicators Ø 4.5 mm shank for compact fittings Lightweight 0.01 kg reduces inertia Accurate reach without compromise to measurement quality The extension rod is engineered to add reach while preserving precision. Made from stainless steel, the 70 mm length increases access to recessed or awkward features without introducing significant flex. The small mass (0.01 kg) keeps additional inertia minimal, reducing the risk of dynamic error when the indicator probe moves. For production environments where repeatability matters, the compact design helps maintain alignment and reduces the need for fixture modification, supporting faster through‑put in routine inspection tasks. Seamless compatibility and simple mounting A standard M2.5 thread ensures secure attachment to a wide range of dial indicators and dial gauges that accept fine threaded extensions. The Ø 4.5 mm shank is optimised for compact fittings and clamping fixtures commonly found in bench and workshop setups. This compatibility simplifies tool-up: the extension attaches quickly and keeps the indicator’s contact geometry consistent, which helps reduce setup time and supports dependable measurement workflows across multiple stations. Durable construction for workshop and lab use Corrosion resistance and long service life are delivered by the stainless steel construction, which tolerates routine cleaning and light coolant splash typical in machining and maintenance areas. The robust material choice reduces wear at the thread and shank interfaces, supporting repeated assembly cycles. For users in quality control, maintenance or assembly, the extension functions as a reliable accessory that preserves gauge performance and helps maintain inspection standards under normal workshop conditions. For a compact, corrosion‑resistant reach extension from Metav IndustryLine, contact Metav Werkzeuge GmbH in Emmerich for specification advice or to request compatibility confirmation with existing gauges. Technical Data Article number: M208.063.7 GTIN: 4054469104225 eClass: 21170613 ETIM: EC002219 Tariff number: 90179000 Facts Length: 70 mm Weight: 0.01 kg Shank diameter: 4.5 mm Thread: M2.5 Special features Material: stainless steel Application: extension for dial indicators / dial gauges Category: accessories for measuring instruments FAQ Is this extension compatible with standard dial indicators? The extension is designed for compatibility with dial indicators that accept an M2.5 attachment thread; compatibility checks are recommended for specialised gauge types. What material is the extension made from? The extension is made from stainless steel, providing corrosion resistance and durability suitable for workshop and lab environments. Will the extension affect measurement accuracy? Any extension adds some lever arm to the probe; however, the low mass (0.01 kg) and compact 70 mm length minimise added error and help preserve repeatability when used with properly fixtured indicators. Can this be used in confined or recessed measurement points? Yes — the 70 mm reach and Ø 4.5 mm shank are intended to access recessed features and tight fixtures where standard indicator mounting would be impractical. How should the extension be maintained? Clean with a soft cloth and mild solvent if needed; inspect thread and shank for wear before use to ensure secure mounting and consistent measurement performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70 x 46 x 65 mm Magnetic Base 60 kg With On/Off Switch And Prism Foot, M10 - Metav IndustryLine
Take advantage of a compact magnetic base that combines 60 kg holding force with a practical on/off switch and a standard M10 threaded stud for fast, repeatable mounting; order directly via Metav Werkzeuge or consult Metav's advisors for specification matching. Magnet M208.106.3 — Magnetic base with 60 kg holding force and M10 thread (Bosch style) A Magnet M208.106.3 magnetic base designed for secure positioning of dial indicators and gauge stands in workshop inspection and measurement tasks 60 kg holding force, reliable clamp On/off switch with prism base Standard M10 threaded stud for mounting Compact and portable at 1.3 kg Fast, secure holding for measurement set-ups The compact magnetic base delivers a 60 kg holding force, allowing rapid fixturing of dial indicators and inspection fixtures without elaborate clamps. The integrated on/off switch disengages the magnet cleanly, speeding up repositioning while preserving the magnetic surface from accidental magnetisation of delicate components. This combination reduces setup time and improves repeatability in routine measuring tasks by providing a stable reference that minimises movement during readings. Standard mounting and compatibility for workshop rigs Equipped with a M10 thread, the magnetic base fits common indicator holders and extension studs used across inspection benches and bench stands. The prism base aids alignment on round or irregular surfaces, so measuring tools rest more securely on shafts and cylindrical parts. At around 1.3 kg, the unit is both sturdy and portable, suitable for bench, machine‑side or mobile inspection carts where a balance of mass and manoeuvrability is required. Practical design for inspection and everyday metrology The device is intended as a purpose-built magnetic mounting aid for metrology work rather than a load-bearing clamp for lifting. The magnetic base is particularly useful for repetitive alignment, comparative checks and temporary fixtures during setup and test runs. Its compact footprint and switchable magnet allow quick changes between jobs, supporting efficient workflows in quality control, maintenance and assembly areas while ensuring consistent positioning for accurate measurements. Choose the Metav IndustryLine magnetic base M208.106.3 for dependable, quick set‑up in inspection applications — contact Metav Werkzeuge for product advice or ordering at info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: M208.106.3 GTIN: 4054469104645 eCl@ss: 21170601 Customs tariff number: 90319000 Brand label: "Bosch" style Facts Holding force: 60 kg Weight: 1.3 kg Thread: M10 SKU: M208.106.3 Special features On/off switch Prism base for cylindrical surfaces Intended for magnetic stands and gauge mounting Compact, portable design FAQ What holding capacity does the magnetic base provide? The Magnet M208.106.3 offers a holding force of 60 kg, suitable for securing dial indicators and small fixtures during inspection. Is the base suitable for cylindrical parts and shafts? Yes, the prism base of the Magnet M208.106.3 improves contact on round surfaces, aiding alignment on shafts and similar components. Which mounting thread is provided for attachment to indicator holders? The unit is supplied with an M10 threaded stud, compatible with standard indicator holders and extension studs. How heavy is the magnetic base for transport and bench work? The Magnet M208.106.3 weighs approximately 1.3 kg, balancing stability with portability for workshop use. Can the magnet be switched off for safe repositioning? The magnetic base includes an on/off switch to disengage the magnet, allowing safe and convenient repositioning without damaging sensitive parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
72mm Clamping Holder With Ø4+8 H7 Bore, Shaft 72x12x6mm - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of the H7 mounting bores and a robust shank to secure lever-type test indicators reliably; the precise fit and compact dimensions support repeatable readings and straightforward fixture changes. Order directly via Metav Werkzeuge or ask our consultants if additional specification details are required. Clamping holder, mounting Ø 4 + 8 H7 mm, shank 72 x 12 x 6 mm (Käfer) The clamping holder, mounting Ø 4 + 8 H7 mm, shank 72 x 12 x 6 mm is designed to provide stable, repeatable fixation for lever-type test indicators in inspection and set-up tasks across workshop environments. H7 mounting bores Ø 4 and Ø 8 mm Robust shank 72 x 12 x 6 mm Suited for lever-type test indicators Precision ground clamping surfaces Secure mounting for accurate indicator readings The holder provides a defined H7 tolerance on both mounting bores, which ensures a tight, standardised fit for commonly used indicator stems with diameters of Ø 4 mm and Ø 8 mm. The H7 class denotes a fine manufacturing tolerance, producing minimal radial play and improving repeatability during measurements. By limiting movement at the interface, the fixture reduces reading scatter and supports reliable comparators and alignment checks in routine inspection work. This mechanical stability is especially valuable when multiple set-ups are required over a production shift. Compact design that matches workshop workflows With a 72 x 12 x 6 mm shank, the component occupies little space on magnetic bases, posts or bespoke holding fixtures while offering a firm grip where space is limited. The compact dimensions allow integration into existing test rigs or portable inspection assemblies without extensive modification. Compatibility with lever-type test indicators makes the holder a practical choice for bench checks, fixture calibration and rapid comparative measurements. The compact form factor also simplifies storage and handling when multiple holders are kept for different indicator types. Operational benefits for inspection and set-up tasks The holder’s precision ground clamping surfaces and clearly defined bore sizes reduce set-up times and lower the risk of misalignment, delivering tangible efficiency improvements in measurement routines. Standardised fits mean fewer bespoke adapters are needed, which shortens preparation cycles and contributes to a steadier throughput. Confidence in consistent fixturing supports better quality assurance reporting and helps maintain process control during small-batch production or prototype runs. For technical clarifications, specification matching or application advice, additional documentation can be provided upon request. For tailored advice on Käfer clamping solutions and swift supply, contact Metav Werkzeuge for product matching and ordering assistance via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000851357NW SKU: 4000851357NW Product type: Clamping holder Brand: Käfer Messuhrenfabrik GmbH & Co. KG Packaging unit: 1 Dimensions & Tolerances Mounting bores: Ø 4 H7 / Ø 8 H7 Shank dimensions: 72 x 12 x 6 mm Tolerance class: H7 Compatibility & Features For lever-type test indicators Precision ground clamping surfaces Compact shank for easy integration FAQ What mounting diameters does the clamping holder accept? The clamping holder accepts stems in Ø 4 mm and Ø 8 mm, each produced to an H7 tolerance for a secure fit. Is the holder suitable for dial test indicators or lever-type indicators? The design is intended for lever-type test indicators and similar feeler-style measuring instruments commonly used in workshop metrology. How does the H7 tolerance affect measurement reliability? An H7 tolerance reduces radial play between holder and indicator stem, improving repeatability and lowering measurement scatter during comparative checks. Can the holder be integrated into existing fixtures and magnetic bases? Yes, the compact 72 x 12 x 6 mm shank is dimensioned for straightforward integration into standard bases and bespoke holding systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75 x 46 x 54 mm Magnetic Base With 54mm Lamellae, 60kg Holding Force, M8 Thread, On/Off Switch - Metav IndustryLine
Take advantage of strong 60 kg magnetic holding, lamellae that conform to uneven contact faces and a compact adjustable height for fast, reliable set-ups; order the magnetic base directly via Metav Werkzeuge or consult our advisors if required. Magnetic Base with Lamellae for Uneven Surfaces M208.110 — 60 kg holding force, M8 thread (Metav IndustryLine) The Magnetic Base with Lamellae for Uneven Surfaces M208.110 is a compact magnetic stand designed for attaching measuring instruments to irregular components in workshops and inspection benches. 60 kg holding force with on/off switch Lamellae 54 mm for uneven surfaces Adjustable height up to 15 mm M8 threaded connection for measuring stands Secure holding that speeds up inspection cycles A high 60 kg magnetic force provides firm clamping on ferrous parts, reducing the need for repeated repositioning during measurement tasks. The robust magnetic action shortens set-up time in quality control and fixture tasks, which increases throughput on the shop floor. Built for repeatable performance, the unit’s on/off switch allows safe handling when mounting or removing indicators, lowering the risk of accidental displacement and protecting sensitive probes. Conforms to irregular geometries for dependable contact The integrated lamellae (54 mm) are engineered to redistribute contact pressure across uneven surfaces, enabling stable seating on pitted, curved or oxidised workpieces where flat bases fail. This adaptive contact preserves alignment of measuring tips and supports accurate readings even on imperfect components. The combination of lamellae and adjustable height (up to 15 mm) makes the holder versatile for small positional corrections without changing stands or fixtures. Compact design for flexible workshop integration Weighing 0.7 kg, the magnetic foot is compact yet sturdy, suited to bench-top use and mobile inspection tasks. The M8 threaded interface ensures compatibility with standard measuring stands and dial indicators, simplifying integration into existing metrology setups. The compact format helps maintain accessibility around fixtures while delivering the stability expected in machining and assembly environments, making it a practical choice for workshop and inspection roles. Reliability backed by a precision partner Delivered under the Metav IndustryLine banner, this magnetic base reflects a pragmatic approach to precision: durable mechanics, straightforward operation and compatibility with common metrology gear. Use in routine measurement, fixture support or temporary clamping benefits from a design that prioritises secure contact and operator control. Metav’s distribution presence in Emmerich acts as a quality filter for the European market, ensuring dependable supply and product consistency. Contact Metav Werkzeuge for tailored advice on integrating the M208.110 magnetic base into inspection and fixture workflows Technical data Article number: M208.110 GTIN: 4054469159423 Manufacturer brand: Metav IndustryLine Facts Holding force: 60 kg Thread: M8 Weight: 0.7 kg Tariff number: 90319000 eClass: 21170601 Special features Lamellae 54 mm for uneven contact faces Maximum adjustable height 15 mm On/off magnetic switch for safe operation Suited for magnet stands and measuring probes FAQ What holding force does this magnetic base provide? The M208.110 offers a holding force of 60 kg, sufficient for securing dial indicators and small measuring fixtures during inspection tasks. Is the base suitable for curved or damaged surfaces? Yes, the lamellae design (54 mm) on the magnetic base adapts to uneven or curved surfaces to maintain stable contact and consistent measurements. Which stands and indicators are compatible with the thread? The unit features an M8 threaded connection, compatible with common measuring stands and indicator holders used in workshops. How is the magnetic action controlled during setup? Operation is manual via an integrated on/off switch that allows safe mounting and removal without compromising the position of attached instruments. Can this magnetic base be used for portable inspection tasks? Its compact form and weight of 0.7 kg make the magnetic foot practical for bench-top and mobile inspection duties where reliable temporary clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75-95mm Digital Internal Gauge 0.001mm Resolution With Round Tips, IP65 - Metav IndustryLine
Take advantage of precise internal gauging with a compact tool that combines a 75–95 mm measuring range, 0.001 mm resolution and rugged IP65 protection for reliable shop-floor checks; order the item directly via Metav Werkzeuge or consult our specialists for application advice. Digital internal probe M209.235 — 75–95 mm range, 0.001 mm resolution The Digital internal probe M209.235 is a compact measuring instrument for fast inspection of bores, grooves and similar internal features in workshop and inspection environments. 75–95 mm range for internal measurements 0.001 mm resolution for fine detection Accuracy ±0.03 mm for reliable readings IP65-rated electronics, robust in workshops Compact class with precise reach for internal features Classified in the micro range for compact gauges, the instrument delivers a 75–95 mm reach while keeping overall dimensions suited to confined spaces. The slender probe and rounded tips (Ø3×8) allow entry into small bores and narrow grooves, which makes the tool particularly useful for repeat inspections of bearings, housings and small assemblies. The compact format ensures minimal probe deflection and consistent contact geometry, supporting repeatable results across multiple points. Digital functions that speed up inspection workflows Equipped with a digital display featuring a progress bar, mm/inch conversion, Preset, Tol and +/- keys, the unit simplifies setup and on-the-spot tolerance checks. The high 0.001 mm display resolution combined with an indicated accuracy of ±0.03 mm provides a clear balance between fine detection and dependable shop-floor performance. Preset and tolerance functions reduce setup time for production runs, while the incremental display readout supports fast pass/fail decisions without additional calculations. Built for workshop use and consistent handling With IP65 protection for the electronics and a sturdy construction at approximately 1.2 kg, the probe withstands typical workshop conditions while remaining portable enough for bench or mobile inspection use. The probe length of 100 mm gives access to deeper pockets without compromising handling, and the device is expressly intended for internal measurements, offering a targeted tool for routine quality control tasks. The overall design focuses on operational efficiency: rapid measurement cycles, clear visual feedback and robust ingress protection contribute to lower measurement downtime. For precise internal gauging and rapid tolerance checks, contact Metav Werkzeuge to discuss the M209.235 and application-specific options — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for direct advice. Technical Data Article number: M209.235 GTIN: 4054469181608 Brand: Metav IndustryLine Facts Measuring range: 75–95 mm Resolution: 0.001 mm Accuracy: ±0.03 mm Probe tip diameter: Ø3×8 mm Probe length: 100 mm Weight: 1.2 kg Protection class: IP65 Special features Digital display with progress bar, mm/inch, Preset, Tol and +/- functions Designed for rapid measurement of bores and grooves Suitable for internal measurements FAQ What measurement range does the instrument cover? The instrument covers a measuring range of 75–95 mm, designed specifically for internal diameters and similar features. What resolution and accuracy can be expected? The unit displays 0.001 mm resolution with an indicated accuracy of ±0.03 mm, providing fine readout and reliable shop-floor performance. Is the display suitable for tolerance checks and quick inspections? Yes; the display includes Preset and Tol functions plus a progress bar and mm/inch conversion to support rapid pass/fail assessments. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Digital Bore Gauge 55–75mm Range 0.001mm Resolution With Round Tips, IP65 - Metav IndustryLine
Take advantage of the combination of high-resolution 0.001 mm measurement, a compact 55–75 mm measuring range and durable IP65 protection for reliable, rapid bore checks on the shop floor. Order the Digital internal bore gauge directly via Metav Werkzeuge or ask our consultants if needed. Digital internal bore gauge 55–75 mm — 0.001 mm resolution, IP65 The Digital internal bore gauge 55–75 mm is a precision instrument for fast internal measurements of bores, grooves and similar features in inspection and production environments. 0.001 mm resolution for submicron readings IP65 protection for shop-floor reliability Compact Mikro range for fine mechanical work Digital display with bar graph and tolerance functions Precision where measured deviations matter The gauge combines a resolution of 0.001 mm with an indicated accuracy of ±0.03 mm, enabling the detection of minute dimensional deviations in small-diameter components. Designed for the Mikro measuring range, it is especially suited to fine mechanical tasks where short, stiff anvils reduce torsion and measurement error. Thanks to the spherical measuring tips, contact geometry is forgiving on imperfect bores while still delivering repeatable readings; this helps to maintain consistent quality standards without prolonged setup. Robust construction for repeated shop-floor use With an IP65 rating, the unit withstands coolant splash and dust commonly found in workshops, so measurement routines remain uninterrupted. The assembly includes a 90 mm probe length and Ø3 x 8 mm spherical tips, giving access to recessed bore features. Delivered in a protective transport case, the instrument stays protected during storage and transit. The digital display with a visual bar graph and selectable mm/inch, preset and tolerance keys speeds up pass/fail decisions and reduces operator interpretation time. Faster checks, clearer results Engineered to speed up internal dimension checks, the instrument is intended for quick comparative measurements and routine inspection tasks. The clear functions — including preset and ± tolerance indications — reduce rework by making out-of-spec conditions immediately visible. Lightweight yet sturdy, the unit supports efficient handling for frequent checks on assembly lines and in quality control benches, enabling measurable time savings per cycle while keeping traceability and reproducibility in focus. For application advice or procurement of the Metav IndustryLine digital internal bore gauge, contact Metav Werkzeuge in Emmerich for personalised guidance and reliable supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M209.234 GTIN: 4054469181592 Brand: Metav IndustryLine Category: Indicator (Messuhr) Label: Digital internal bore gauge 55 - 75 mm x 0.001 mm resolution Facts Measuring range: 55–75 mm Resolution: 0.001 mm Indicated accuracy: ±0.03 mm Weight: 1.2 kg Probe length: 90 mm Tip diameter: Ø3 x 8 mm Protection class: IP65 Special features For rapid measurement of bores, grooves and similar internal features Digital display with bar graph, mm/inch, 0/off, Preset, Tol and +/- buttons Spherical measuring tips Delivered in transport case FAQ How precise are the measurements with this instrument? The instrument provides a resolution of 0.001 mm and an indicated accuracy of ±0.03 mm, making it suitable for fine internal measurements within its 55–75 mm range. Can this gauge be used on the shop floor? Yes. The IP65 protection and robust construction make the gauge appropriate for workshop environments where dust and splashes occur. What internal features can be measured with this device? The gauge is intended for fast measurement of bores, grooves and similar internal geometries; the spherical tips aid contact on slightly irregular surfaces. Does the delivery include a protective case? The tool is supplied in a transport case to protect the instrument during storage and transportation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Extension Rod For Dial Indicators M2.5 Thread Ø4.5mm Stainless Steel - Metav IndustryLine
Combine stainless steel durability with a 75 mm reach and a standard M2.5 fitting to extend dial gauge capability for confined or awkward measurement points. Order this accessory directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. Dial gauge extension, 75 mm, M2.5 thread — Metav IndustryLine A Dial gauge extension designed to provide precise 75 mm reach with an M2.5 connection for reliable accessory mounting in metrology setups 75 mm reach for confined measurements M2.5 connection for standard dial gauges Ø 4.5 mm rod for rigid alignment Corrosion‑resistant stainless steel construction Greater reach for precise contact in tight spaces The Dial gauge extension offers an exacting extension of measuring range without compromising stability. With a 75 mm length and a slim Ø 4.5 mm profile, the rod keeps the contact point rigid while enabling access to deep bores, recesses and recessed features that standard gauge stems cannot reach. The M2.5 threaded connection provides a secure mechanical fit to most metric dial and lever gauges, ensuring repeatable contact conditions and minimised measurement scatter for quality control tasks. Durable material and finish for long service life Constructed from stainless steel, the extension resists corrosion and everyday workshop wear, preserving straightness and surface quality over repeated use. The material choice reduces the need for frequent replacement, supporting continuous operation on the shop floor and lowering lifecycle costs. The robust design is particularly suited to machining and inspection environments where moisture, coolant or temperature variation can accelerate degradation of lesser alloys. Compatibility and practical workshop integration Designed as an accessory for dial and lever gauges with an M2.5 mounting, the extension fits directly onto standard metric gauge threads, simplifying retrofit work and spare‑parts logistics. The compact geometry keeps handling straightforward during fixture setups and gauge swaps, improving throughput in routine inspection cycles. For bespoke setups or questions about compatibility with a particular instrument model, Metav Werkzeuge provides application advice and can recommend suitable gauge pairings for stable, traceable measurements. Contact Metav Werkzeuge for tailored advice on integrating this Metav IndustryLine dial gauge extension into workshop setups — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: M208.063.G GTIN: 4054469104317 eClass: 21170613 ETIM: EC002219 Category: Measuring instruments > Accessories Story trigger: accessory Dimensions & Numbers Length: 75 mm Diameter: Ø 4.5 mm Thread: M2.5 Tariff number: 90179000 Materials & Features Material: stainless steel Brand: Metav IndustryLine Application: accessory for dial gauges and lever indicators Compact design for confined measurements FAQ What thread size does the extension use? The extension is fitted with an M2.5 thread to match common metric dial gauge mountings. Which instruments are compatible with this extension? The accessory is compatible with dial gauges and lever indicators that accept an M2.5 stem connection; Metav IndustryLine recommends checking the gauge thread before assembly. Is the extension corrosion resistant? Yes—the extension is manufactured from stainless steel, offering good resistance to corrosion in workshop environments. What measurement applications benefit most from this accessory? The extension is ideal for reaching recessed features, deep bores and other confined spaces where the gauge’s standard stem cannot make direct contact. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8 mm Digital Dial Indicator, 0.001 mm Resolution, mm/inch Display, Zero/On-Off Buttons, 40 mm Bezel, Supplied In Case - Metav IndustryLine
The compact design, 0–8 mm measuring range and 0.001 mm resolution make this indicator a precise and time‑saving choice for process control; the combination of fine resolution, ±0.005 mm accuracy and a clear digital readout ensures repeatable measurements and fewer rejects. Order directly via Metav Werkzeuge for reliable delivery or consult the team for application advice. Metav IndustryLine Digital Indicator Ø40 mm (0–8 mm, 0.001 mm resolution) The Metav IndustryLine Digital Indicator Ø40 mm is a compact displacement gauge designed for precise dimensional checks and run‑out measurement in workshop and laboratory quality control. 0.001 mm resolution for fine measurements ±0.005 mm accuracy for reliable results mm/inch display with Zero and ON/OFF functions 40 mm dial with clear digital readout Supplied in protective transport box Faster, more reliable inspection with micrometre resolution With a 0.001 mm display step and an effective ±0.005 mm accuracy, this indicator reduces interpretation uncertainty and speeds up inspection cycles. The very fine resolution allows small deviations to be detected immediately during setup or quality checks, which shortens troubleshooting and lowers rework rates. Integration into routine inspection procedures benefits from the stable mechanical design and the precise measuring range 0–8 mm, making the instrument suitable for fine‑tolerance components and short‑travel comparative measurements. Clear measurements and simple mounting for efficient use The 40 mm digital dial and the intuitive control set (mm/inch, Zero, ON/OFF) support fast readings and straightforward data collection. A standard 8 h6 mounting shank ensures secure attachment to indicator holders and lever arms, while the modest weight (0.222 kg) keeps the unit easy to manoeuvre during repetitive checks. The digital readout eliminates parallax and speeds decision making on the shop floor, which improves throughput without requiring extensive operator training. Protected delivery and workshop‑ready robustness Delivered in a protective transport box, the instrument is ready for immediate use and safe storage between shifts. The casing and dial construction are designed for routine industrial handling, and the compact form factor requires minimal bench space. Supplied accessories and the clear readout help the device perform consistently as part of a measurement chain, supporting traceable quality control and predictable results in production processes. For application guidance, calibration options and delivery from Emmerich, contact Metav Werkzeuge for tailored measurement advice and practical recommendations on using this Metav IndustryLine indicator in production. Technical data SKU: M301.012 GTIN: 4054469184623 Label: Digital indicator, 8 x 0.001 mm, Ø40 mm outer ring Manufacturer: Metav IndustryLine Facts Measuring range: 0–8 mm Resolution: 0.001 mm Accuracy: ±0.005 mm Dial diameter: 40 mm Mounting shank: 8 h6 Weight: 0.222 kg Special features Digital display with mm/inch selection, Zero and ON/OFF functions Delivered in protective transport box (plastic or wooden) Suitable for workshop and laboratory dimensional checks Compact, low‑mass design for easy handling FAQ What is the measuring range and resolution of this indicator? The indicator covers a measuring range of 0–8 mm with a display resolution of 0.001 mm, providing very fine incremental readings for short‑travel checks. How accurate are the readings for routine quality control? Typical measurement accuracy is ±0.005 mm, which supports reliable tolerance verification and quicker go/no‑go assessments in production. Can the display show imperial units? Yes — the digital display offers both mm and inch modes and includes a Zero function for comparative measurement workflows. How is the digital indicator mounted to test stands or holders? The unit features an 8 h6 mounting shank for secure attachment to common indicator holders and magnetic stands used in workshops. Is the indicator supplied ready for use and protected for transport? The instrument is supplied in a protective transport box, ensuring safe delivery and immediate readiness for workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8 mm Digital Indicator 0.01 mm Resolution, Ø40 mm Dial, mm/inch Display, Zero/On-Off, Supplied in Case - Metav IndustryLine
Take advantage of precise micro‑measurement capability and a clear digital readout to speed up inspection tasks; the compact design and light weight maintain ease of use across repeated checks. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Dial Indicator M301.011 — 0–8 mm range, 0.01 mm resolution (Metav IndustryLine) The M301.011 is a compact digital dial indicator designed for micro‑measurement tasks and inspection of small components in fine engineering and precision workshops. 0.01 mm resolution for precise readings 40 mm clear dial for rapid visual checks Inch/mm display with zero and on/off buttons Lightweight 222 g for handheld inspection Compact precision for micro measurements This instrument is ideal where small tolerances matter: with a measuring range of 0–8 mm and a resolution of 0.01 mm, it belongs to the micro class of inspection tools and is tailored to fine mechanical work such as watchmaking, micro‑assemblies and small bearing checks. The tight measuring span reduces lever effects and helps preserve rigidity during contact readings, which improves repeatability and reduces operator‑induced variation. Such defined technical limits make the device especially useful on inspection benches and in quality control loops where consistent, verifiable measurements are required. Digital convenience that speeds up inspection The integrated digital display supports both mm/inch readouts and a zero function for relative measurements, together with an on/off control for power saving. A 40 mm dial ring provides a large, readable surface while the electronic readout eliminates parallax and simplifies logging of values. The stem specification 8 h6 ensures secure mounting in standard holders and stands, reducing play during repeated checks and enabling faster through‑process inspection. These features combine to shorten measurement cycles and reduce transcription errors in daily quality routines. Designed for frequent handling and clear verification Weighing approximately 0.222 kg, the instrument is light enough for handheld checking yet solid in feel for stable contact. The construction supports rapid placement and extraction during small‑series production checks or corrective set‑ups at the machine. Clear scale elements and the responsive display make it straightforward to incorporate the device into process control procedures, where quick verification of critical dimensions enhances workflow efficiency. The overall specification balances ease of use with measurement reliability to support both craft and industrial inspection tasks. For dependable micro‑inspection choose the Metav IndustryLine M301.011 — contact Metav Werkzeuge in Emmerich for specialist advice and rapid fulfilment Technical data Article number: M301.011 GTIN: 4054469184616 Manufacturer: Metav IndustryLine Facts Measuring range: 0–8 mm Resolution / Readability: 0.01 mm Accuracy: 0.01 mm Dial diameter: 40 mm Weight: 0.222 kg Stem: 8 h6 Special features Digital display with mm/inch, zero and on/off Category: Dial indicators Digital instrument FAQ What is the measuring range of this dial indicator? The measuring range is 0–8 mm, making the M301.011 suitable for micro‑scale inspection tasks where small tolerances are required. What resolution and accuracy can be expected? Resolution is 0.01 mm and the stated accuracy is 0.01 mm, which supports precise readings for standard workshop quality checks with the Metav IndustryLine digital dial indicator. Can the instrument be used with a stand or holder? Yes. The stem is specified as 8 h6, allowing secure mounting in compatible holders and stands for repeatable positioning during inspections. Which display functions are available on the unit? The instrument offers a digital display with selectable mm/inch readout, a zero function for relative measurements, and an on/off button for power management. Is the M301.011 suitable for workshop process control? With its compact form, 0.01 mm resolution and a clear digital readout, the M301.011 is suited to bench checks and inline verifications within workshop process control regimes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8 mm Shaft Timing Adjustment Tool M14x1.25 For Dial Indicator Mounting - Metav IndustryLine
Take advantage of a simple, purpose-designed accessory that combines M14x1.25 mounting, direct compatibility with 8 mm shank dial gauges and a very low mass for quick engine set‑up. Order the adapter via Metav Werkzeuge or consult our technical team for guidance on integration into existing measurement rigs. Ignition timing setting tool M14x1.25 for dial gauge (8 mm shank) — Metav IndustryLine The Ignition timing setting tool M14x1.25 for dial gauge (8 mm shank) is a compact attachment for fitting a dial gauge directly to cylinder‑head threads, intended to simplify and speed up accurate ignition timing checks in workshop and engine‑service environments. M14x1.25 thread for cylinder‑head mounting Fits all dial gauges with 8 mm shank Low mass: 0.05 kg for easy handling Repeatable timing checks through secure mounting The core advantage of this adapter is a secure, threaded interface that converts a cylinder‑head port into a reliable gauge mount. By using the M14x1.25 thread specification, the accessory provides a stable reference point for a dial gauge, reducing lateral play during measurement and ensuring precision when setting ignition timing. The secure mechanical connection shortens set‑up time and lowers the risk of misalignment, which translates directly into fewer re‑checks and less engine downtime. Compact form for faster workshop workflows Designed to be unobtrusive and lightweight, the unit’s 0.05 kg mass supports quick handling during repeated adjustments on engines of all sizes. Its compact footprint means it can be left in place during short test runs without interfering with other tools, and it stows easily in service kits. This compactness delivers practical efficiency: quicker transitions between cylinders, reduced operator fatigue and a tidier work area that supports higher throughput in routine maintenance tasks. Universal compatibility that streamlines tooling Compatibility is a central benefit: the adapter fits all dial gauges with 8 mm shank reception, making it a flexible addition to existing metrology equipment without the need for bespoke gauge holders. This universality enables workshops to standardise their timing procedures across different gauge brands and models, improving process consistency. The accessory is ideally suited for engine builders, vehicle workshops and educational labs that require a straightforward, repeatable method for piston or cam timing checks. Request the Metav IndustryLine ignition timing setting tool via Metav Werkzeuge for precise and efficient timing setups; our technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 to advise on compatibility and integration Technical data Article number: M208.152.1 GTIN: 4061905043178 EClass: 21179203 Manufacturer: Metav IndustryLine Facts Weight: 0.05 kg Thread: M14x1.25 Shank reception: 8 mm Special features For installing dial gauges Suitable for cylinder‑head mounting Compact accessory for ignition timing FAQ What thread size does the adapter use? The adapter uses an M14x1.25 thread for secure cylinder‑head mounting. Which dial gauges are compatible with this adapter? Compatibility covers all dial gauges with an 8 mm shank reception; the adapter was designed for universal fit with standard 8 mm gauge stems. Is the adapter suitable for repeated workshop use? Yes, the ignition timing setting tool is intended as a reusable workshop accessory and supports frequent fit‑up and removal during routine servicing. Can the adapter remain fitted during short engine tests? The compact design and low mass make it suitable to remain in place for short test runs without obstructing other service operations. Which SKU should be ordered for this item? Order reference: M208.152.1 for the Metav IndustryLine ignition timing setting tool. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
8.4mm Measurement Insert Steel For Dial Gauges, Roll Form - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of a compact measuring solution that combines steel construction, a precisely machined Ø 8.4 mm tip and a standard M2.5 thread for reliable mounting on dial gauges; order genuine parts via Metav Werkzeuge or consult our specialists for application-specific advice. Measuring insert Ø 8.4 mm (M2.5 thread) – Käfer The Measuring insert Ø 8.4 mm (M2.5 thread) is a steel measuring tip designed for secure attachment to dial indicators, intended for precise length and depth measurement tasks in workshop and inspection environments. Steel construction for high wear resistance Ø 8.4 mm tip for defined contact geometry M2.5 thread for standard dial indicator mounting Compact design for confined measuring setups Engineered for repeatable precision and long service life This steel measuring component is manufactured to ensure repeatable precision in routine inspection work. The steel body gives the insert high abrasion resistance and dimensional stability, which reduces measurement drift over time and minimises rework. The Ø 8.4 mm contact geometry provides a clear, reproducible contact area so readings from a connected dial indicator remain consistent from one operator to the next. Where traceable, repeatable results are required, this insert supports efficient quality control by maintaining the mechanical relationship between probe and indicator. Compatibility and straightforward fitting for measuring instruments Mounting relies on a common M2.5 thread interface, offering broad compatibility with many dial indicators and small gauge fixtures found in production and maintenance workshops. The standardised thread ensures a secure mechanical connection, eliminating play that could otherwise affect the measurement outcome. The compact design permits installation in restricted test holders or bespoke fixturing, making the insert suitable for both bench-mounted inspection rigs and machine-mounted gauge assemblies. Assembly and replacement are quick, allowing measurement systems to be returned to service with minimal downtime. Practical benefits for workshop workflows and inspection throughput Beyond material and size, the insert contributes to predictable inspection cycles: the robust steel construction reduces replacement frequency, improving equipment availability and lowering lifecycle costs. Consistent contact geometry leads to consistent readings, which in turn simplifies statistical process control and reduces the need for repeated checks. For operations that demand reliable repeatability and straightforward integration with standard dial indicators, this measuring tip represents a pragmatic balance between durability and precision. Contact Metav Werkzeuge for tailored product matching, availability details and genuine Käfer measuring inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and order handling Technical data Article number: 4000851681NW SKU: 4000851681NW Product type: Measuring insert Material: Steel Diameter: Ø 8.4 mm Thread: M2.5 Packaging unit: 1 Brand: Käfer Messuhrenfabrik GmbH & Co. KG Facts Ø 8.4 mm M2.5 thread Packaging unit 1 Form: Rolle Special features For use with dial indicators Steel construction Compact contact geometry FAQ What is the thread size of the measuring insert? The measuring insert is provided with an M2.5 thread to fit standard dial indicator mounts. Which diameter does the contact tip have? The contact tip has a Ø 8.4 mm diameter as specified for precise, repeatable contact points with test pieces. Is the insert suitable for heavy-wear environments? Made from steel, the insert offers improved wear resistance compared with softer materials, making it suitable for routine workshop inspection tasks. Can the insert be used with any dial indicator? Compatibility depends on the indicator’s mounting thread; indicators with an M2.5 mounting interface will accept this insert securely. What is the article number for ordering and reference? The article number for this measuring insert is 4000851681NW, which should be quoted when enquiring or ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80 kg Magnetic Base M10 With On/Off Switch And Prism Foot - Metav IndustryLine
Take advantage of the combination of robust 80 kg holding force, an M10 threaded connection and a user-friendly on/off magnetic control for reliable indicator mounting and swift set‑ups; order the magnetic base directly via Metav Werkzeuge or consult the specialists for tailored advice. Magnetic Base M208.103 — 80 kg holding force, M10 thread (Metav IndustryLine) The Magnetic Base M208.103 is a compact magnetic holding solution for indicator stands and measurement fixtures in machine shops and inspection benches. *80 kg nominal holding force *On/off magnetic control for fast set-up *M10 threaded connection for universal fittings *Prism foot for secure contact with round rods Secure mounting for precision measurement A nominal 80 kg holding force provides a clear, quantifiable basis for stable attachments on ferrous surfaces; this level of grip reduces micro‑movement in comparative and inspection work, improving measurement reproducibility. The magnetic mechanism with an integrated on/off switch enables swift engagement and release without tools, which shortens fixture time and minimises handling errors. The M10 threaded interface matches common indicator stems and attachment posts, ensuring compatibility with standard metrology equipment and simplifying integration into existing setups. The compact form offers a balance of mass and portability while delivering steady support for dial and electronic indicators. Effortless operation with versatile contact geometry The built-in prism base creates a secure seating for round or cylindrical posts, while the flat magnet face maintains stable contact on planar surfaces; this dual contact geometry expands the range of applications from machine tables to cylindrical workpieces. The on/off control prevents inadvertent sliding during repositioning and allows controlled release when changing measurement points. As a result, set‑up times are reduced and workflow efficiency in quality control and workshop inspection is increased, delivering a measurable productivity benefit for repetitive measurement tasks. Workshop resilience and practical dimensions Designed for everyday use in industrial environments, the magnetic base combines rugged construction with manageable weight — approximately 1.2 kg — ensuring easy handling without sacrificing steadiness. The compact dimensions (61 x 50 x 55 mm) make it suitable for confined spaces and bench‑top applications where larger holders would obstruct access. The unit’s nominal holding force and mechanical interface are particularly well suited to indicator stands and magnetic posts used in metalworking, toolroom inspections and assembly control, providing a dependable foundation for repeatable readings and faster set‑ups. Choose the Metav IndustryLine magnetic base for secure, quick and compatible indicator mounting — contact Metav Werkzeuge in Emmerich for precise delivery and specialist advice. Technical Data Article number: M208.103 GTIN: 4054469104539 ECLASS: 21170601 Tariff number: 90319000 Facts Holding force: 80 kg Thread: M10 Weight: 1.2 kg Dimensions: 61 x 50 x 55 mm Special features On/off magnetic control Prism foot for round rods and cylindrical posts Intended for magnetic stands and indicator fixtures Category: Magnetic stands (magnetic bases) FAQ What holding capacity does the magnetic base offer? The magnetic base delivers a nominal holding force of 80 kg, providing stable support for indicator stands and similar measurement fixtures. Which thread is used for attachments? The unit uses an M10 threaded connection, making it compatible with standard indicator stems and mounting posts for measurement setups. Is the base suitable for cylindrical and flat surfaces? Yes, the prism foot secures cylindrical posts while the flat magnet face provides firm contact on planar ferrous surfaces, enabling versatile use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80-100mm Digital External Probe 0.001mm Resolution With Rounded Tips, IP65 - Metav IndustryLine
Take advantage of precise digital readout, a compact 80–100 mm measuring range and robust IP65 protection for consistent, repeatable checks on small bores and grooves; order the digital external probe directly via Metav Werkzeuge or consult our specialists for application advice. Digital External Probe M209.265 — 80–100 mm range · 0.001 mm resolution (Metav IndustryLine) The Digital External Probe M209.265 is a compact, high-resolution dial-gauge-style instrument for quick external measurements in tight spaces, ideal for workshop and quality-control tasks *High-resolution 0.001 mm display *Measuring range 80–100 mm *IP65 dust and splash protection *Preset, tolerance and +/- functions Accurate readings that reduce rework and downtime The probe delivers a 0.001 mm resolution coupled with a stated accuracy of 0.03 mm, enabling reliable detection of small deviations during routine checks. The high-resolution digital readout shortens measurement cycles by removing interpretation errors associated with analogue scales, which improves throughput in serial inspection. The instrument’s numerical precision and repeatable digital output translate directly into fewer scrapped parts and less time spent on corrective machining. Compact design tailored for fine mechanical tasks With a measuring span of 80–100 mm, this compact device sits within the micro measurement class, which is optimised for extremely compact workpieces and fine mechanical components. Such a range provides an excellent balance of reach and rigidity for small bores, grooves and similar features; the short probing geometry reduces flex and helps maintain measurement stability when handling minute parts. The rounded probe tips (Ø3×6) and a probe shank length of 55 mm make the unit well suited to constrained access while preserving contact quality. Digital functions that simplify everyday inspection The integrated display includes a run bar and mm/inch, 0/off, preset, tol and +/- keys, supporting quick conversions, reference-setting and simple tolerance checks without additional equipment. These features allow rapid go/no-go decisions on the shop floor and reduce operator steps during repetitive checks. The instrument is designed for external measurement tasks and is described specifically for fast checking of bores and slots, which makes it a practical tool for machining and assembly operations. Robust construction for workshop environments Rated IP65, the unit resists dust ingress and splash water, permitting use at the production line without compromising the electronics. The construction balances light handling with a durable build to withstand the knocks of daily use; a weight of 1.2 kg provides a reassuring feel without being cumbersome. The compact assembly and protective rating together contribute to longer service life and lower maintenance needs in industrial settings. Integration and workflow benefits Although small in size, the device supports standard shop routines: immediate numeric output reduces interpretation time, the tolerance and preset keys simplify in-process control, and the precise resolution supports documented quality requirements. For operations seeking to tighten inspection intervals and deliver consistent component quality, the probe offers a measurable improvement in test speed and reproducibility while remaining straightforward to operate. Contact Metav Werkzeuge for tailored application advice or to arrange a purchase; reach our team in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M209.265 GTIN: 4054469181653 Category: Dial gauge / measuring instrument Label: Digital-Außentaster 80 - 100 mm x 0,001 mm reading 0,001 mm, with rounded tips Numbers / Core technical data Measuring range: 80–100 mm Resolution: 0.001 mm Accuracy: 0.03 mm Weight: 1.2 kg Probe/shank length: 55 mm Designs / Special features IP65 protection Digital display with run bar, mm/inch, 0/off, preset, tol, +/- keys Measuring tips: Ø3×6 Suitable for external measurements Intended for quick measurement of bores, grooves and similar features FAQ What measurement range does this instrument cover? The probe covers a measuring range of 80–100 mm, making it suitable for small to mid-size external checks in fine mechanical work. How fine is the display resolution and how reliable are the readings? The digital readout provides a 0.001 mm resolution and the unit is specified with an accuracy of 0.03 mm, supporting precise repeatable measurements for production and inspection tasks. Can the unit be used in a wet or dusty shop environment? Yes, the instrument is rated IP65, which protects against dust ingress and low-pressure water jets, permitting reliable use on the shop floor. Which functions support fast tolerance checks on the line? The built-in preset, tol and +/- keys, together with the run bar and mm/inch conversion, enable quick reference setting and straightforward go/no-go checks without additional equipment. Is the device intended for internal measurements as well as external? This model is specifically designed and described for external measurements, with rounded probe tips optimised for measuring bores and grooves from the outside. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80kg Magnetic Base M8 With On/Off Switch And Prism Foot - Metav IndustryLine
Reliable holding and simple on/off control make this magnetic base an efficient choice for mounting indicator posts; the M8 thread and 80 kg nominal holding force suit standard measuring fixtures and provide consistent clamping in daily workshop use. Order the magnetic base directly via Metav Werkzeuge or ask the consultants if further clarification is required. Magnetic Base M208.102 — Magnetic base with 80 kg holding force and M8 thread (Metav IndustryLine) Magnetic Base M208.102 is a compact magnetic holder for indicator stands and measuring fixtures, combining a strong nominal holding force with an integrated on/off switch and a prism foot for secure contact with round components 80 kg nominal holding force Integrated on/off magnetic switch Prism foot for cylindrical parts M8 threaded connection for indicator posts Firm support where accuracy matters The 80 kg nominal holding force provides a stable foundation for comparators and dial indicators, reducing the risk of movement during measurement. The built-in on/off switch simplifies clamping and release, eliminating the need for auxiliary tools and speeding up setup times. This combination improves process reliability by keeping fixtures secure without sacrificing the ability to reposition quickly. The design therefore supports efficient inspection workflows and predictable measuring outcomes. Precise seating for round and flat workpieces The prism foot allows direct contact with cylindrical surfaces, while the flat areas of the base accommodate planar parts, making the holder suitable for a range of measuring tasks on the shop floor. The M8 thread accepts common indicator posts and accessory stems, enabling quick integration into existing stands and fixtures. These features translate to fewer compatibility issues and a shorter time-to-measure during routine checks and setup operations. Compact footprint and easy handling With overall dimensions of 61 x 50 x 55 mm and a mass of 0.95 kg, the unit combines portability with enough mass to remain steady under load. The compact footprint reduces obstruction around the workpiece and permits closer placement of gauges in tight arrangements. The modest weight keeps manual handling straightforward while the solid magnetic system maintains the necessary holding capacity for everyday metrology tasks. Built for workshop demands Constructed to serve as a practical clamping element in indicator stands and magnetic fixtures, the magnetic base offers predictable performance in repetitive measurement tasks. The magnetic system and mechanical interfaces are designed for regular use, supporting rapid fixturing and repeatable positioning. As part of the Metav IndustryLine range, the holder aligns with the vendor’s focus on delivering accessible, dependable precision tools suited to industrial and trade environments. Choose the Metav IndustryLine magnetic base for secure, fast measurement set-ups — contact Metav Werkzeuge by email or phone to arrange supply or request technical details Technical Data Article number: M208.102 GTIN: 4054469104515 ECLASS: 21170601 Customs tariff number: 90319000 Facts Holding force: 80 kg Thread: M8 Weight: 0.95 kg Dimensions: 61 x 50 x 55 mm Special features Integrated on/off magnetic switch Prism foot for cylindrical parts Threaded M8 connection for indicator posts Category: Magnetstative FAQ Is the holding force sufficient for mounting heavy indicator arrangements? The Magnetic Base M208.102 delivers an 80 kg nominal holding force, which is suitable for most standard indicator stands and moderate accessory loads in workshop and inspection environments. Can the base be used directly on round shafts and tubes? Yes, the integrated prism foot on the Magnetic Base M208.102 is specifically designed for secure contact with cylindrical components, improving stability on shafts and pipes. Which thread size is provided for accessory mounting? The product is supplied with an M8 threaded connection, compatible with common indicator posts and mounting stems used in measuring stands. How portable is the magnetic holder for use at different workstations? Weighing 0.95 kg and measuring 61 x 50 x 55 mm, the unit is compact enough for frequent repositioning while still offering the necessary mass for stable clamping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Depth Gauge Bridge Flat Measuring Surface For Dial Indicators, 16mm Height - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of the compact 80 mm bridge length and the stable flat measuring face to achieve repeatable depth checks in confined setups; order directly via Metav Werkzeuge or consult the team for suitability and availability. TB 80 depth measuring bridge — 80 mm bridge length, 16 mm height TB 80 depth measuring bridge for precise, compact depth checks with a flat surface for dial gauges 80 mm bridge length for compact measurements Flat measuring face for dial gauges 16 mm height for shallow depth checks Precision manufacturing by Käfer Messuhrenfabrik Consistent readings from a compact measuring accessory The TB 80 is designed as a compact depth measuring bridge that concentrates essential measuring geometry into a small footprint. With an 80 mm bridge span and a 16 mm nominal height, the component provides a flat measuring face that supports dial gauges securely. This geometry reduces wobble and contact variability, which leads to higher repeatability in routine depth verifications and fewer rejected parts. The compact format also minimises fixture changes, shortening inspection cycles and improving workflow efficiency. How the bridge improves workshop throughput A stable measuring platform with a level contact surface converts gauge movement into reliable readouts; the supplied design features ensure that the flat measuring face seats dial indicators with minimal repositioning. By standardising the measuring interface, the bridge reduces setup time and the likelihood of measurement error, delivering measurable gains in accuracy and throughput. The construction supports consistent comparative checks across batches, making it suitable for small-part inspection and frequent in-process controls in a busy workshop environment. Practical applications and handling benefits Engineered for routine depth checks, the measuring bridge is particularly useful where access is limited or where a conventional depth gauge cannot span the feature. Its compact dimensions make it easy to integrate into measuring benches, fixtures or portable setups, while the level contact face improves stability during readings. The product’s clarity of purpose—providing a repeatable interface for dial gauges—translates into faster decision-making on the shop floor and increased confidence in measurement results. Contact Metav Werkzeuge in Emmerich for detailed technical advice, availability and to request product-specific guidance at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: 4000851318NW Model series: TB 80 Product type: Depth measuring bridge Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Packaging unit: 1 Facts Bridge length: 80 mm Height: 16 mm UID: 4000851318NW Special features Flat measuring face for dial gauges Compact bridge format Series TB 80 FAQ What applications is the bridge intended for? The depth measuring bridge is intended for repeatable depth checks and comparative measurements where a level contact face for dial gauges is required; it suits small-part inspection and routine workshop controls. Can the TB 80 be used with standard dial gauges? Yes, the TB 80 provides a flat measuring face optimised to seat standard dial gauges and to deliver stable readings during depth verification. What are the key dimensions to consider when integrating the bridge? The primary dimensions are the 80 mm bridge length and the 16 mm height, which determine span and clearance when planning fixtures or benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Extension Rod For Dial Indicators M2.5 Thread Ø4.5mm Stainless Steel - Metav IndustryLine
Combine the compact 80 mm reach, secure M2.5 thread connection and stainless steel construction to extend probe access without sacrificing measurement reliability; order the extension directly via Metav Werkzeuge or ask our consultants for application advice. Extension for dial indicators M208.063.8 — 80 mm length, M2.5 thread (Metav IndustryLine) An extension for dial indicators that increases probe reach for confined and recessed measurement tasks in workshop and inspection environments. 80 mm extension length for deeper reaches Thread M2.5 for standard dial gauge spindles Ø 4.5 mm shank for stable mounting Stainless steel for corrosion resistance Extend reach without compromising accuracy The compact 80 mm extension provides a simple, reliable way to access recessed bores, stepped surfaces and hard‑to‑reach inspection points while maintaining the original precision of the measuring chain. Fitted with a standard M2.5 thread, the component mates directly with most dial gauge spindles and probe holders, so insertion does not introduce play or significant run‑out. The modest length reduces lever action and bending moment compared with longer adapters, preserving repeatability during repeated checks in production or maintenance routines. Durable stainless steel for workshop reliability Manufactured from stainless steel, the extension resists corrosion and abrasion in workshop environments where coolant, oils or humidity can affect lesser materials. The Ø 4.5 mm shank offers a secure seating in collets and holders, reducing micro‑movement that would otherwise compromise readings. As a simple mechanical accessory it requires no calibration itself, yet it contributes to a stable measurement setup: by choosing a corrosion‑resistant alloy and tight thread tolerances, the part helps sustain consistent contact geometry and extends the service life of the gauge assembly. Easy integration for consistent inspections Integration into existing inspection fixtures and hand‑held setups is straightforward thanks to the M2.5 interface and industry‑standard dimensions. The extension suits batch inspection, spot checks on assemblies and quality control benches where repeated mounting and dismounting occur; its compact profile minimises interference with surrounding features and tooling. Using a standardised accessory reduces setup time and supports a smoother workflow across different gauges and fixtures, which in turn improves throughput and lowers the risk of measurement errors in routine checks. For workshop and inspection upgrades, request the Metav IndustryLine extension via Metav Werkzeuge — our Emmerich team will advise on compatibility and ensure fast dispatch to your site Technical data SKU: M208.063.8 GTIN: 4054469104232 Article category: Accessories (measuring instruments) Facts Length: 80 mm Shank diameter: Ø 4.5 mm Thread: M2.5 Tariff number: 90179000 Special features Material: stainless steel Compatible with dial indicators and probe holders ECLASS: 21170613 ETIM: EC002219 FAQ What instruments is this extension compatible with? The extension for dial indicators is designed for dial gauges and probe holders with an M2.5 spindle thread and fits standard mountings used in workshop and inspection environments. Will the extension affect measurement accuracy? When used with a suitable holder and correctly mounted, the extension maintains measurement reliability; its 80 mm length and robust shank geometry are chosen to minimise additional deflection and preserve precision. Is the component corrosion resistant? Yes, the part is manufactured from stainless steel, providing enhanced corrosion resistance and longer service life in typical workshop conditions. Can the extension be used with digital dial indicators? The extension is compatible with digital and analogue dial indicators that accept an M2.5 threaded probe; ensure the instrument’s spindle connection matches the M2.5 standard for secure mounting. Are adapters available for other thread sizes? The supplied unit has an M2.5 thread; adapters for other thread standards can be sourced separately if an alternative spindle interface is required Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80x60x80 mm Magnetic Base 80 kg With On/Off Switch And Prism Foot, M12 - Metav IndustryLine
Strong 80 kg magnetic holding force combined with an M12 mounting thread and a prism foot ensures stable, repeatable positioning for indicator stands; order the magnetic base directly via Metav Werkzeuge or ask the consultants for tailored advice. Magnetic Base M208.106.6 — Magnetic base with 80 kg holding force and M12 thread (Metav IndustryLine) The Magnetic Base M208.106.6 is a compact magnetic clamping solution with an on/off switch and prism foot, designed for secure mounting of dial indicators and accessories in workshop and inspection environments. 80 kg magnetic holding force On/off switch for quick release Prism base for cylindrical parts M12 thread for universal mounting Reliable holding for precise measurement results A holding force of 80 kg delivers a stable foundation that reduces vibration and movement during measurement tasks, improving repeatability and lowering the risk of rework. The integrated on/off switch simplifies setup and release compared with permanent magnets, allowing rapid repositioning of the stand without tools. Designed to interface with standard mounting posts via the M12 thread, the base provides a quick, mechanically secure connection that supports accurate alignment of indicators and sensors. Versatile support for irregular workpieces The prism base converts a flat magnetic foot into a specialist support for cylindrical components, such as shafts or round housings, enabling solid contact and preventing lateral slippage during inspection. With a mass of 2.15 kg, the unit balances portability with enough substrate weight to maintain contact on vertical or angled surfaces. The combination of prism geometry and strong magnetism makes this base particularly suitable for workshops that measure a mix of flat and round parts using a single stand. Durable design that speeds up workshop workflows Robust construction and a tactile switching mechanism ensure long service life and dependable operation in daily production and metrology tasks. Reduced setup time from the quick‑action switch and the compatibility with common indicator posts translate directly into operational efficiency: fewer adjustments, faster inspections and a steadier process flow. The unit’s straightforward functionality supports standard quality-control routines while delivering the consistency required for repetitive measuring tasks. Contact Metav Werkzeuge for a specification check or to secure the Metav IndustryLine magnetic base with M12 mounting for your inspection setup. Technical data Article number: M208.106.6 GTIN: 4054469104676 Brand: Metav IndustryLine Category: Magnetic stands SKU: M208.106.6 Facts Holding force: 80 kg Weight: 2.15 kg Thread: M12 Customs tariff number: 90319000 Special features On/off switch Prism foot for cylindrical parts Designed for indicator mounting Suitable for magnetic stands FAQ What holding force does the magnetic base provide? The magnetic base provides an 80 kg holding force, offering secure clamping for most dial‑indicator setups and light fixtures. Can the base support round shafts or cylindrical workpieces? Yes, the prism foot is specifically designed to stabilise cylindrical parts so that indicator probes can be positioned reliably. Which thread is used for mounting accessories? Mounting is via an M12 thread, compatible with many standard indicator posts and adapters. Is the unit portable for use across multiple machines? With a weight of 2.15 kg, the base is portable enough for routine repositioning while still providing the mass needed for stable measurements. Is the magnetic base suitable for standard workshop indicators? Yes, the magnetic base is intended to be used with conventional dial indicators and test stands, providing a secure and repeatable mounting solution. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precise measurements with dial indicators for workshop and production use
Dial indicators are high-quality measuring devices designed for a variety of measuring ranges and fine-tuning tasks. These instruments, available in digital and analogue versions, enable precise assessment of concentricity, flatness and comparative measurements in confined or critical areas.
How dial indicators work and where they are essential
Analogue dial indicators transmit the linear movement of the probe via a rack-and-pinion mechanism to the pointer, with an additional revolution counter showing extended travel. Many types operate in both compression and tension, so a wide effective measuring range is covered. Lever-type indicators use a lever system instead of a rack, offering a smaller range but finer resolution. Typical workshop applications include runout checks at the lathe, setting up depth on milling tables or circular saws, and comparative checks during series production.
Tangible benefits for everyday production
- Fast, repeatable readings for comparison work, reducing setup and inspection time.
- Stable measuring force and hardened contact tips for reliable, wear-resistant contact and consistent results.
- Broad selection: digital dial indicators, mechanical dial indicators, depth gauges, lever-type test indicators, fine‑point test indicators and thickness gauges cover most shop tasks.
- Reduced risk of measurement error through appropriate instrument choice and accessories, improving first-pass yield.
- Flexible deployment on machines and inspection benches thanks to standardised mounts and probes.
Why choose Metav as your precision partner
Metav stands for the democratisation of precision, combining decades of expertise with a comprehensive inventory for industry, crafts and trade. From Emmerich, Metav operates as a practical quality filter for the European market, supplying over 48,000 satisfied customers and more than 250,000 products. For buyers who prioritise dependability and a single-source approach, Metav’s range of dial indicators and related measuring equipment provides a technically sound and convenient solution.
Core takeaway
Dial indicators deliver precise, repeatable measurements across a variety of specialised tasks; selecting the correct type—whether digital, analogue or lever-type—ensures reliable results and smoother production processes.
FAQ
What is the main difference between analogue and digital dial indicators?
Analogue dial indicators transmit movement via a rack-and-pinion and show mechanical pointer travel, which can be advantageous for visual trend detection; digital dial indicators provide direct numerical readout and often allow data output for logging and analysis, both of which are available from Metav.
When should I use a lever-type test indicator instead of a standard dial indicator?
Use a lever-type indicator when you need finer resolution over a small measuring range or when the probe must access tight spaces; lever-type instruments are particularly useful for checking runout and small surface variations.
How do I avoid damaging an analogue dial indicator’s gearing?
Avoid forcing the probe beyond its travel range; where significant overtravel is possible, choose a model with an appropriate range or a built-in stop. A drag pointer or anti-backlash feature can also reduce the risk of gear damage by preventing delayed pointer return.
Are special contact tips necessary for different materials?
Yes. For consistent results and reduced wear, choose hardened contact tips or balls appropriate to the material and surface finish being measured; Metav’s product range includes a variety of probe tips and accessories for this purpose.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com