Precision drill chucks for secure, high-performance machining
Precision drill chucks reliably hold rotating tools with cylindrical shanks, such as twist drills, reamers or countersinks, ensuring centred clamping that prevents slippage and reduces premature tool wear. Designed for both traditional keyed chucks and quick-change, self-tightening variants, these drill chucks deliver fast tool changes and increasing clamping force under load, while CNC precision chucks with SK or HSK interfaces enable high speeds and minimal runout. By using hardened, synchronised jaws that provide a force-fit grip, a quality chuck maintains the tool on the spindle axis and extends tool life, improves hole accuracy and supports consistent production.
131mm MK3 x B16 Taper Arbor Hardened And Ground With DIN 238 Drill Chuck Mount - TECWERK
Take advantage of the combination of precision, robust toolholding and straightforward compatibility to maintain consistent machining tolerance and minimise unplanned downtime; order the taper arbor directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK taper arbor MT3 to B16 — hardened and ground, 131 mm TECWERK taper arbor MT3×B16, designed for reliable mounting of drill chucks on drilling and turning machines Drill-chuck taper DIN 238 compatible Fully hardened and ground finish Morse taper MT3 external taper For mounting drill chucks on lathes and drills Precision toolholding to boost machining accuracy This taper adaptor delivers precise concentricity and consistent runout control by combining a Morse taper MT3 external taper with a matched B16 shank interface. The adherence to DIN 238 for the drill-chuck taper ensures compatibility with common chucks, translating into repeatable hole positions and reduced scrap rates. For production environments where dimensional consistency is critical, the adaptor provides a measurable improvement in process stability and setup repeatability. Durable construction that reduces maintenance intervals Constructed in a fully hardened and ground execution, the arbor resists wear at contact surfaces and maintains seating accuracy over prolonged use. The heat treatment and finishing process minimise fretting and micro-movements between taper surfaces, lowering the frequency of regrinding or replacement. Workshops benefit from fewer interruptions and predictable maintenance cycles, which supports higher machine availability and lower total cost of ownership. Seamless compatibility for quick integration into existing fleets The arbor is engineered to accept standard drill chucks via the DIN 238 chuck taper and mates with machines using a Morse taper MT3 nose. The B16 shank provides a conventional connection for many drill and lathe tailstocks or spindle noses, so adaptation is straightforward and does not require special fixtures. This compatibility shortens setup times and simplifies tooling logistics across small-batch and serial production. Practical advantages for workshop and toolroom workflows For metalworking shops, maintenance departments and toolrooms, the adaptor supports flexible toolholding strategies: exchange chucks quickly, perform bench-mounted drilling or transfer operations between machines with minimal rework. The robust finish and standard interfaces make it suitable for repetitive use in production and for demanding reaming or drilling tasks. If questions arise about suitability for a particular machine or chuck, technical consultation is recommended to confirm fit and function. For reliable toolholding with proven compatibility, choose the TECWERK taper arbor — contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832336NW Manufacturer: TECWERK Product type: Taper arbor Facts Overall length: 131 mm Taper: Morse taper MT3 Shank: B16 Standard: DIN 238 Package unit: 1 Special features With drill-chuck taper DIN 238 Fully hardened and ground For mounting drill chucks on drilling and turning machines Hardened and ground execution FAQ What taper standard does the arbor use? The arbor uses a Morse taper MT3 external taper for spindle seating and a B16 shank interface to mate with conventional machine fittings. Is the arbor suitable for mounting drill chucks? Yes, the arbor is designed to receive drill chucks via the DIN 238 chuck taper; the chuck itself is not included. How does the hardened and ground finish benefit workshop use? The hardened and ground surfaces maintain seating accuracy, reduce wear and limit fretting, which extends service life and preserves concentricity during repeated mountings. Which machines can use this taper arbor? The unit is intended for drilling and turning machines that accept Morse taper MT3 spindles and a B16 shank connection; compatibility depends on the machine’s spindle or arbor configuration. Can the arbor be used in precision production environments? Yes, by combining MT3 taper geometry with the DIN 238 chuck taper and a hardened finish, the arbor supports precision toolholding suitable for controlled production processes. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
139mm Morse Taper MT3 Collet Arbor Hardened And Ground With B18 Shank, DIN 238 - TECWERK
Benefit from a hardened, ground MT3–B18 taper arbor that complies with DIN 238 and measures 139 mm overall — combining a secure chuck fit with durable construction for consistent machining results; order directly via Metav Werkzeuge or consult our specialists for application advice. MT3–B18 taper arbor — hardened and ground with DIN 238 drill‑chuck taper (TECWERK) The MT3–B18 taper arbor is a hardened, ground arbor designed to accept drill chucks on drilling and turning machines, offering a precision interface for reliable toolholding. DIN 238 drill-chuck taper Hardened and ground finish MT3 shank with B18 reception Secure, low‑runout mounting for accurate machining The design provides a Morse taper (MT3) interface mated to a B18 reception, giving a rigid and concentric connection between machine spindle and chuck. A correctly fitted taper arbor reduces runout and vibration, which directly improves hole quality and tool life. For users unfamiliar with the term, runout describes the deviation of the rotating axis from true centre; minimising it prevents uneven wear and poor surface finish. The hardened, ground surfaces ensure a repeatable, tight fit that aids in maintaining precision across repeated mounting cycles. Broad compatibility with standard drill chucks and machines Compliance with DIN 238 means the taper conforms to the recognised drill‑chuck standard, simplifying selection and ensuring compatibility with commonly used chucks. The arbor’s MT3 shank is suitable for machines accepting Morse taper shanks and, via the B18 reception, accepts Jacobs‑style drill chucks for a secure union. This combination offers practical flexibility in workshops that use both drill presses and toolroom lathes, enabling straightforward interchange of chucks without modification. The clear standardisation reduces downtime and supports predictable tool setup. Built to last: hardened and ground for dependable workshop use Manufactured with a focus on durability, the arbor is hardened and ground to resist wear and maintain concentricity over time. This robust construction reduces the need for frequent replacement and supports steady production schedules. In routine use, simple cleaning and correct withdrawal methods will preserve the taper condition; light lubrication of the contact faces during storage avoids corrosion without impairing the fit. The result is a component that contributes to lower maintenance needs and dependable everyday performance on the shopfloor. Contact Metav Werkzeuge today for tailored technical advice or to request a quotation; reliable supply direct from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832338NW Manufacturer: TECWERK Product type: Taper arbor Label: Kegeldorn MK3xB18 geh.u.geschl.Gesamt-L.139mm TECWERK Facts Total length: 139 mm Shank taper: MT3 Reception: B18 Standard: DIN 238 Packaging unit: 1 Special features With drill‑chuck taper DIN 238 Ganz gehärtet und geschliffen (hardened and ground) For acceptance of drill chucks on drilling and turning machines Execution: hardened and ground FAQ Which machines are suitable for this taper arbor? The MT3–B18 taper arbor by TECWERK is intended for drilling machines and lathes that accept a MT3 shank; its B18 reception takes standard drill chucks. Does the arbor comply with any standards? Yes — the arbor features a drill‑chuck taper according to DIN 238, ensuring compatibility with chucks manufactured to that standard. How does the arbor affect machining accuracy? Using this hardened and ground arbor reduces runout and vibration, which improves hole quality and extends drill bit life compared with less precise toolholding options. Is specialised maintenance required? Routine cleaning and light protection against corrosion are sufficient; the hardened and ground finish is designed for longevity under normal workshop conditions. What is the article number for ordering or reference? The article number (SKU) is 2000832338NW for the TECWERK MT3–B18 taper arbor. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
140mm Ejector Pin for Morse Tapers MK1+2, DIN 317 - TECWERK
Reliable taper ejection with DIN 317 conformity and a 140 mm overall length ensures quick, repeatable tool changes; order directly via Metav Werkzeuge or consult our specialists for application advice. Taper Drift DIN 317 (for Morse Tapers MK1+2) – 140 mm, TECWERK The Taper Drift DIN 317 provides a standardised solution for ejecting tool tapers from machine spindles, engineered for use with Morse tapers MK1 and MK2 in workshop and industrial environments Complies with DIN 317 standard For Morse tapers MK1 and MK2 Overall length 140 mm for secure engagement Faster, more reliable tool removal for continuous workflows A standardised taper drift designed to DIN 317 reduces downtime during tool changes by delivering consistent ejection performance. Conformity to DIN 317 and compatibility with tool tapers according to DIN 228 mean the device fits common tapers without the need for custom adapters. This predictable fit improves throughput in production environments where frequency of changeovers affects cycle times. The combination of standard compliance and targeted design supports machine uptime and predictable maintenance scheduling, which is particularly beneficial for small series production and general workshop operations. Practical handling and workshop durability that supports safety Equipped with an overall length of 140 mm, the extractor offers sufficient reach and leverage for clean removal of seated tapers, while remaining compact for easy storage in tool cabinets. The simple geometry suited to Morse tapers MK1 and MK2 ensures controlled release of the tool shank, reducing the risk of damage to the spindle taper or cutting tool. The design emphasises ease of use: a single-handed placement and a firm strike transfer the force directly along the axis, ensuring safe ejection without twisting or wedging. For technicians seeking an uncomplicated workshop solution, this drift combines straightforward handling with the robustness expected in everyday use. Clear compatibility notes and guidance for selection The tool is specified for Morse tapers MK1 and MK2, and is intended for use with standard tool tapers as per DIN 228 design. For teams less familiar with taper systems: Morse tapers are self-locking when fully seated, and require an axial impact to disengage; a purpose-made taper extractor distributes that impact reliably. Selecting a drift that matches the taper system prevents misalignment and wear. Where applications demand other taper sizes or specialised interfaces, refer to technical specifications to confirm fit; Metav Werkzeuge can provide clarification on compatibility and alternative part options. For reliable, standard-compliant taper ejection choose the TECWERK DIN 317 taper drift — check availability with Metav Werkzeuge or discuss the exact application with our technical consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000832761NW Brand: TECWERK Product type: Taper drift Facts Overall length: 140 mm Pack unit: 1 Standard: DIN 317 Special features Suitable for: Morse tapers MK1+2 Intended for: tool tapers according to DIN 228 Conforms to: DIN 317 FAQ What taper sizes does this extractor support? The extractor is suitable for Morse tapers MK1 and MK2, providing a direct fit for those common taper sizes. Is the drift compliant with any standards? Yes, the tool is manufactured to DIN 317 and intended for use with tool tapers as specified in DIN 228. How long is the extractor and what does that mean in practice? The overall length is 140 mm, offering sufficient reach for secure placement and effective axial ejection without excessive overhang. Can the drift be used on non-Morse tapers? The design is optimised for Morse tapers MK1 and MK2; use on other taper systems is not recommended without confirming dimensional compatibility. How is the tool best used to avoid damage to the spindle? Place the extractor squarely against the taper shoulder and apply axial impact; the standard geometry ensures force is directed along the axis to avoid twisting or wedging. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
140mm Reducer Sleeve MK4 to MK3 Hardened And Ground DIN 2185 - TECWERK
Take advantage of the combination of standardised design, hardened and precision-ground finish, and a reliable MT4-to-MT3 conversion to maintain concentricity and reduce tool changes; order the adaptor directly via Metav Werkzeuge or contact our consultants for application advice. TECWERK Reduction sleeve DIN 2185 MT4→MT3, hardened and ground The TECWERK reduction sleeve MT4→MT3 is a precision adapter sleeve for converting a Morse taper MT4 spindle to accept MT3 tooling, compliant with DIN 2185 for workshop and industrial applications. DIN 2185 compliant design Hardened and precision-ground finish Converts MT4 to MT3 Morse taper 140 mm overall length Reliable taper conversion to keep production moving The reduction sleeve provides a straightforward mechanical solution for tool compatibility: adapting an MT4 receptacle to accept MT3 tooling while maintaining runout within the expectations of the DIN 2185 standard. By following an established norm, the adapter gives a verifiable basis for procurement and quality assurance. This reduces the need for multiple spindle changes or additional tooling investments and supports a smoother production flow through fewer interruptions. The conformity to standards ensures predictable interchangeability in workshop and industrial environments. Built for concentricity and long service life Constructed hardened and precision-ground both internally and externally, the sleeve is designed to preserve axial accuracy and resist wear over prolonged use. Hardening increases surface strength and fatigue resistance, while grinding refines contact surfaces to improve seating and minimise runout. The combination results in a durable adapter that keeps cutter concentricity stable under repeated mounting cycles. The 140 mm overall length provides sufficient engagement for secure seating without excessive protrusion, balancing stability and accessibility for common machining setups. Straightforward fitment and practical workshop benefits Installation follows the simple press-fit principle of Morse tapers: the external taper locates in the spindle cone and the internal taper accepts the tool shank, creating a friction fit that centres automatically. Because the sleeve is specified for tools with a Morse taper, compatibility is explicit and tool selection becomes easier for maintenance teams and production planners. The robust finish reduces the risk of fretting and extends service intervals, while the standardised format aids inventory management in workshops, production lines and service departments. For dependable taper adaptation and technical advice from our Emmerich quality hub, contact Metav Werkzeuge to order the TECWERK reduction sleeve MT4→MT3 or request specification support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 2000832357NW UID: 2000832357NW Norm: DIN 2185 Manufacturer: TECWERK Facts Overall length: 140 mm Packaging unit: 1 Special features Fully hardened Inner and outer precision-ground For tools with Morse taper Inner taper: MT3 Outer taper: MT4 FAQ Is this sleeve compliant with industry standards? Yes. The TECWERK reduction sleeve is manufactured to DIN 2185, ensuring standardised dimensions and reliable interchangeability for taper adapters. Can the sleeve be used on all MT4 spindles? The adapter is designed for MT4 receptacles and accepts MT3 tooling; the fit follows Morse taper principles and the sleeve is hardened and precision-ground to ensure consistent seating. How does the hardened and ground finish benefit workshop use? Hardening increases wear resistance and fatigue strength, while the precision-ground surfaces improve seating accuracy and reduce runout, extending service life and lowering maintenance needs. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
147mm Morse Taper MT3 Taper Shank With B22 Drill Chuck Mount, Hardened And Ground - TECWERK
Benefit from the secure fit of an MT3 taper combined with the B22 drill‑chuck interface and the durability of a fully hardened and ground finish; this combination reduces runout and supports consistent tool performance. Improve machine uptime and minimise rework by specifying the DIN‑conforming arbor. Order the taper arbor directly via Metav Werkzeuge or request technical advice from our consultants. Taper arbor MT3×B22 (TECWERK) — DIN 238, hardened and ground, 147 mm Taper arbor MT3×B22 for accepting drill chucks; designed for drill and turning machines with a DIN 238 drill‑chuck interface DIN 238 drill‑chuck taper B22 Morse taper MT3 external shank Fully hardened and precision ground Suitable for drill and turning machines Proven precision for reduced runout and consistent results A defined taper fit is the basis for rotational accuracy in machining. The MT3 external taper paired with the B22 drill‑chuck interface manufactured to DIN 238 provides a standardised seating that minimises micro‑movement. The hardened and ground finish lowers friction and limits elastic deformation during clamping, which in turn reduces runout and improves repeatability. These characteristics translate into fewer rejected parts and more predictable machining outcomes, particularly important for repetitive drilling operations and fine finishing tasks. Durable design that lowers maintenance needs Workshop applications demand components that resist wear and retain concentricity under repeated use. The arbor’s fully hardened and precision ground execution increases abrasion resistance and helps maintain retention force over prolonged service. Reduced wear means longer intervals between checks and regrinding, supporting continuous production schedules. In practical terms, the robust surface treatment protects both the arbor and the mounted drill chuck, contributing to lower total cost of ownership in a busy tooling environment. Compact dimensions for straightforward machine integration The Taper arbor MT3×B22 has an overall length of 147 mm, a form factor that suits a wide range of drill presses and turning centres while keeping overhang and imbalance low. Supplied as a single unit (packaging unit: 1), the arbor accepts Jacobs‑style chucks with the B22 taper and simplifies inventory management. The product is listed under SKU 2000832337NW for straightforward ordering and specification checks. For machine matching and balance considerations, consult technical notes to ensure optimal mounting and safe operation. For precision toolholding with a DIN‑conforming drill‑chuck interface, request the TECWERK MT3→B22 taper arbor via Metav Werkzeuge; Metav’s Emmerich team can advise on fit, delivery and workshop integration at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000832337NW Product: Taper arbor Brand: TECWERK Standard: DIN 238 Core dimensions Taper (external): MT3 Chuck taper: B22 (DIN 238) Overall length: 147 mm Packaging unit: 1 Design and features Fully hardened and ground For the acceptance of drill chucks on drill and turning machines Execution: hardened and ground Suitable for Jacobs‑type chucks FAQ Is the arbor compatible with standard MT3 spindles? Yes. The arbor features an MT3 external taper designed for standard MT3 spindles and mates with B22 drill‑chuck fittings according to DIN 238. What does compliance with DIN 238 mean for the user? DIN 238 specifies the dimensions and tolerances for drill‑chuck tapers; conformity ensures interchangeability and predictable seating when using any B22‑compatible chucks with this arbor. How does the hardened and ground finish affect performance? The hardened and ground surface improves wear resistance and maintains concentricity, so the arbor preserves retention and reduces runout over many clamp cycles. Which machines is this arbor suitable for? The component is intended for drill presses and turning machines that accept MT3 external tapers and B22 drill‑chuck fittings; it is commonly used where Jacobs‑type chucks are mounted. What is the overall length and how is it supplied? Overall length is 147 mm and the item is supplied as a single unit (packaging unit: 1), referenced under SKU 2000832337NW. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Conical Cleaning Swab Wooden Body With Leather Pad, For Morse Taper MT3 - TECWERK
Take advantage of the wooden body and leather-faced cleaning surface to maintain precise taper contact and reduce wear; the tool is designed specifically for Morse taper MK3 spindles and removes dust, chips and grime reliably. Order the Morse Taper Cleaner MK3 (Wooden Body) directly via Metav Werkzeuge or ask our consultants if needed. Morse Taper Cleaner MK3 (Wooden Body) – leather-faced taper cleaner for MK3 spindles by TECWERK A Morse Taper Cleaner MK3 (Wooden Body) designed for routine maintenance of machine tapers to remove dust, chips and light contamination and to help preserve accurate clamping and repeatability in turning and drilling centres. Wooden body with leather facing Designed for MK3 Morse tapers Removes dust, chips and grime Preserve clamping accuracy with a soft, effective contact surface A leather-faced cleaning head on a wooden body provides a gentle yet effective method to remove debris from machine tapers without introducing abrasives that could alter the seating surface. Regular use minimises the risk of misalignment caused by compacted swarf and dust, which helps sustain repeatable tool clamping and reduces setup time. The design focuses on maintaining contact precision rather than aggressive material removal, so the taper seat remains intact while cleanliness and reliability improve. Simple maintenance that supports productive workflows The tool is tailored for Morse taper MK3 applications and fits common industrial lathes and drilling machines that use this taper size. By clearing chips and fine contamination from the taper surface, downtime for rework or taper regrinding can be reduced; this contributes to a smoother production flow and predictable clamping behaviour. The cleaner’s wooden construction with a leather pad balances durability and softness, offering a cost-effective maintenance tool that complements existing workshop practices and scheduled upkeep. Practical handling and applicability across workshop environments Built as a straightforward maintenance implement, the cleaner requires no consumables and can be used during routine checks or quick changeovers. Its shape and material composition make it suitable for manual use at the machine bench and for operators with varied experience levels; the working principle is intuitive — wipe the taper surface with the leather-faced end until clean. For workshops seeking to protect spindle tapers from contamination, this implements a low-effort preventive measure that supports long-term spindle health and consistent tool seating. For durable maintenance of MK3 tapers, choose the TECWERK taper cleaner and contact Metav Werkzeuge in Emmerich for purchasing advice or specification support at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 4000832883NW Product name: Konuswischer MK3 Holzkörper Manufacturer: TECWERK Specifications Packaging unit: 1 Special features Material: Wooden body Suitable for: Morse taper MK3 Application: cleaning machine tapers from dust, chips and dirt Construction: wooden body with leather facing FAQ How does this taper cleaner protect the taper surface? The leather-faced wooden cleaner removes debris without abrasive action, so the taper surface is cleaned while the seating geometry is preserved; the Morse Taper Cleaner MK3 (Wooden Body) is intended for gentle maintenance. Is the tool compatible with other taper sizes? This version is designed specifically for MK3 Morse tapers; for other taper sizes, a differently sized cleaner should be used to ensure correct contact and effective cleaning. Can the cleaner be used on hardened or coated tapers? The cleaner is suitable for removing loose dust and swarf from machine tapers; for specialty coatings or hardened seats follow the machine manufacturer’s maintenance recommendations when using the cleaner SKU 4000832883NW. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Heavy-Duty Quick-Change Drill Chuck 1–13mm B16 Right-Hand - TECWERK
Take advantage of a self‑clamping, heavy industrial chuck with a wide 1–13 mm range and a B16 taper for secure mounting; it delivers reliable clamping and straightforward integration into stationary drilling setups. Order directly via Metav Werkzeuge or contact the consultants for specification support. TECWERK keyless drill chuck B16, 1–13 mm — heavy industrial, self‑clamping The TECWERK keyless drill chuck B16 1–13 mm is a heavy‑duty chuck designed for stationary machines, offering secure tool retention and compatibility with right‑hand rotation setups. Heavy industrial design for stationary machines Self‑clamping mechanism for secure tool grip Clamping range 1–13 mm for versatile tooling B16 taper arbor, right‑hand rotation, Ø 46 mm outer Reliable clamping for uninterrupted machining The chuck provides secure clamping through a self‑clamping mechanism that reduces the risk of tool slippage and minimises interruptions during operation. With a 1–13 mm clamping range, the device accommodates common drill shanks and small tooling without adapters, which simplifies tool inventory and changeovers. This design lowers the likelihood of lost production time, as the firm grip improves concentricity and helps maintain consistent drilling quality across batches. Rapid tool changes to maintain throughput A key advantage of the keyless design is speed: the keyless chuck enables fast insertion and release of tools, reducing non‑productive time between runs. The B16 taper provides a standardised mounting interface for many bench and pillar drills found in production and maintenance workshops. Specified for right‑hand rotation, the chuck matches the spindle direction of most conventional drilling machines, guaranteeing correct engagement and predictable performance when swapping tools during tight production schedules. Engineered for demanding workshop environments Built as a heavy industrial design, the chuck tolerates the rigours of continuous use in workshop and light industrial settings. The Ø 46 mm outer profile offers a compact footprint while ensuring mechanical robustness for repetitive cycles. Regular inspection and basic maintenance preserve performance; the straightforward construction allows for cleaning and lubrication without complex disassembly, supporting long‑term durability and reliable runout behaviour in everyday operations. Clear application scope and integration benefits Intended primarily for fixed machinery, the chuck suits pillar and bench drills that accept a B16 arbor and operate in right‑hand rotation mode. Its universal clamping range makes it appropriate for general drilling tasks in workshops, maintenance bays and small production lines where dependable tool retention is essential. Compatibility with common drill shank sizes reduces the need for special adapters, simplifying procurement and tool management for purchasing teams. For procurement or technical queries about the TECWERK keyless drill chuck and its suitability for specific machines, contact Metav Werkzeuge for prompt advice and stock information. Technical Data Article number: 2000832053NW Product: Keyless drill chuck Mounting: B16 Clamping range: 1–13 mm Outer diameter: 46 mm Form: heavy industrial design Rotation direction: right‑hand rotation Facts Clamping range: 1–13 mm Outer diameter: 46 mm Package unit: 1 Special features Self‑clamping mechanism Heavy industrial execution for stationary machines B16 taper arbor Designed for right‑hand rotation FAQ What machines is this chuck compatible with? The chuck mounts to machines with a B16 arbor and is designed for stationary drills that operate with right‑hand rotation; the TECWERK keyless drill chuck B16 1–13 mm fits standard pillar and bench drill spindles using that taper. Can the chuck handle quick successive tool changes? Yes, the keyless design on the TECWERK chuck enables rapid tool swaps without a key, which helps to maintain throughput in production and workshop environments. Is the clamping range suitable for common drill sizes? The 1–13 mm clamping range covers the majority of everyday drill shanks used in maintenance and general machining, reducing the need for multiple specialised chucks. How does the self‑clamping mechanism improve performance? The self‑clamping action secures the tool shank firmly, improving concentricity and reducing slippage, which leads to more consistent hole quality and fewer tool‑related stoppages. Are there special maintenance requirements? Basic cleaning and occasional lubrication keep the chuck performing reliably; its industrial construction is intended for straightforward serviceability under normal workshop maintenance routines. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Precision Quick-Change Drill Chuck 0-10mm Range B12 Taper Right-Hand High-Speed Hardened Components - RÖHM
Take advantage of the combination of precision, durable construction and rapid tool changes to keep production running smoothly; the self-tightening design and hardened wear parts ensure stable clamping at high speeds. Order the chuck directly via Metav Werkzeuge or consult the team for application advice. Spiro quick-change drill chuck — precision execution, 0–10 mm, B12, RÖHM The Spiro quick-change drill chuck in precision execution is designed for right-hand rotation and engineered for high-speed, high-accuracy drilling tasks on drilling machines and boring mills Precision execution, self-tightening Hardened wear parts for long life Clamping range 0–10 mm, suitable for B12 Designed for right-hand rotation, high speeds Improved hole accuracy and reduced rework The precision variant of this quick-change drill chuck delivers consistent clamping force and reduced run-out, which leads to repeatable hole tolerances and fewer secondary operations. The self-tightening mechanism maintains grip during rotation, so set-up time is reduced and machining stability is improved. For workshops and toolrooms that prioritise dimensional accuracy, this chuck provides measurable benefits in throughput and part quality. Longer service life and lower maintenance demands All wear parts are hardened, and the chuck features permanent, automatic re-tensioning to compensate for gradual wear. These design choices extend maintenance intervals and reduce spare-part turnover, translating into lower life-cycle costs. The durable construction is particularly advantageous where frequent tool changes and continuous operation are required, as the chuck resists typical wear mechanisms found in demanding production environments. Fast changes, simple machine integration With a B12 taper mount and a clamping range of 0–10 mm, the chuck integrates cleanly into standard drilling spindles and toolholders. The compact outer diameter facilitates accessibility in confined setups while the quick-change capability shortens tool-change cycles. Clear, measurable specifications ensure straightforward compatibility checks during machine planning and retrofit projects. Safe operation at production speeds Designed for right-hand rotation and optimised for high-speed use, this precision chuck supports reliable clamping during demanding runs on drill presses and boring mills. The combination of accurate centring and the self-acting tension system reduces the risk of slippage under load, helping to maintain process reliability and operator confidence during continuous production. Choose the RÖHM Spiro precision quick-change drill chuck for demanding, high-speed drilling operations and contact Metav Werkzeuge for ordering or technical consultation: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 4000832068NW Label: Schnellspannbohrfutter Spiro Spann-Ø 0-10mm B 12 f.Re.-Lauf RÖHM Product type: Quick-change drill chuck Brand: RÖHM Mount: B12 Clamping range: 0–10 mm Rotation: Right-hand rotation Outer diameter: 43 mm Packaging unit: 1 Key figures Clamping range: 0–10 mm Outer diameter: 43 mm Mount: B12 SKU: 4000832068NW Special features Precision execution Self-tightening mechanism All wear parts hardened Permanent automatic re-tensioning Suitable for high speeds and accuracy work With taper mount Designed for right-hand rotation FAQ What clamping range does the chuck cover? The chuck offers a 0–10 mm clamping range suitable for small-diameter tooling and drill bits. How is the chuck mounted to the machine? Mounting is via a B12 taper; the B12 interface ensures direct compatibility with machines equipped for this mount type. Is the chuck suitable for high-speed drilling? Yes, the precision design and self-tightening feature make the chuck suitable for high-speed operation while maintaining clamping stability. Are the wear parts replaceable or hardened? All wear parts are hardened to extend service life, and the design allows for maintenance and parts replacement when required. Which rotation direction is supported? This chuck is designed for right-hand rotation, matching the standard spindle direction of many drilling machines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Prime Gear Drill Chuck 1.5–13mm Keyed S2A B16 Shank Right-Hand - RÖHM
Take advantage of a robust, keyed design and a wide 1.5–13 mm clamping range for reliable, repeatable drilling performance in stationary machines; order directly via Metav Werkzeuge or consult our specialists for application sizing. Prima Geared Drill Chuck (B16) — 1.5–13 mm clamping, right-hand rotation — RÖHM The Prima Geared Drill Chuck (B16) is a keyed, heavy‑duty chuck for stationary machines, engineered for right‑hand rotation and precise clamping of drill shanks from 1.5 to 13 mm. Heavy-duty keyed design Clamping range 1.5–13 mm B16 mounting with DIN 238 arbor Right-hand rotation, impact-proof Industrial performance for stationary machining The geared chuck delivers consistent torque transmission and stable tool holding thanks to its ring‑gear mechanism and keyed operation. Fitted with a B16 mounting and supplied with a drill‑chuck arbor conforming to DIN 238, it integrates cleanly with standard stationary spindles. The combination of a keyed drive and the geared housing reduces slippage under load, which leads to fewer reworks and a clearer machining window for operators using medium to heavy drilling cycles. The design is described as impact‑drill‑proof, making it suitable for demanding production environments where intermittent heavy loads occur. Precision clamping that reduces downtime With a clamping range of 1.5–13 mm and a key interface of S 2 A, the chuck secures common drill shank sizes without compromise. The keyed engagement ensures a firm grip on the tool, improving concentricity and lowering run‑out compared with friction chucks; this supports cleaner holes and extended tool life. The specified right‑hand rotation aligns with standard spindle directions for most workshop and industrial drill presses, simplifying tool selection and reducing setup errors. The unit’s availability as a heavy industrial execution makes it a dependable choice for fixed‑station drills and bench machines. Supply reliability and Metav industry support Sourcing through Metav Werkzeuge links the product’s technical strengths with dependable logistics and customer service. Metav’s role as a quality filter for the European market ensures stock management, spare‑part availability and clear specification guidance for workshop buyers and procurement teams. The chuck is delivered with the keyed accessory referenced as Art. no. 4000832050, and documentation on mounting and key size facilitates swift installation. For precision workshops seeking consistent parts and a single supplier for measuring and assembly needs, this approach reduces vendor complexity and supports uninterrupted production. Contact Metav Werkzeuge for tailored application advice or to request this Prima geared drill chuck (SKU 4000832036NW) for stationary machines, quoting the SKU for rapid processing. Technical Data SKU: 4000832036NW Product type: Geared drill chuck Brand: RÖHM Mounting: B16 Clamping range: 1.5–13 mm Key size: S 2 A Rotation direction: Right-hand Facts Clamping range: 1.5–13 mm Mounting standard: B16 Key size: S 2 A SKU: 4000832036NW Special features Drill‑chuck arbor to DIN 238 Impact‑drill‑proof design Supplied with key Art. no. 4000832050 Heavy industrial execution for stationary machines FAQ What clamping range does the Prima geared drill chuck offer? The Prima geared drill chuck provides a 1.5–13 mm clamping range suitable for common drill shank sizes. Is the chuck compatible with standard B16 spindles? Yes, the chuck uses a B16 mounting and includes a drill‑chuck arbor to DIN 238 for direct compatibility with B16 spindles. Which key size is required for tightening? The keyed interface is S 2 A; the supplied key is referenced as Art. no. 4000832050. Can this chuck withstand impact drilling conditions? The unit is specified as impact‑drill‑proof, designed for the intermittent heavy loads typical in stationary drilling operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Quick-Change Drill Chuck 0.5–10mm Capacity Self-Clamping, B16 Shank, Right-Hand - ALBRECHT
Benefit from secure, repeatable toolholding and quick bit changes through the combination of a self‑clamping mechanism, maximum clamping force and a precise B16 taper. Order the chuck directly via Metav Werkzeuge or consult our specialists for compatibility advice. SBF quick‑change drill chuck by ALBRECHT — 0.5–10 mm, B16 taper, right‑hand rotation The SBF quick‑change drill chuck is a self‑clamping, high‑precision chuck for B16 taper spindles designed for continuous, right‑hand rotation applications Self‑clamping design for secure toolholding Maximal clamping force for reliable operation B16 taper with high runout accuracy Replaceable hardened wear parts for longevity Secure, repeatable toolholding for demanding production The SBF quick‑change drill chuck delivers a self‑clamping action that converts tightening into consistent axial and radial grip, providing maximum clamping force for reliable machining cycles. This design reduces the need for frequent retuning of tools and supports a stable spindle load under continuous use. The combination of high clamping power and highest runout accuracy improves hole quality and repeatability, which is critical in series production and precision workshops. By favouring technical stability over ad hoc adjustments, process reliability and throughput are improved. Fast changeover and precise fit for B16 spindles With a clamping range of 0.5–10 mm and a B16 taper mounting, the chuck enables rapid bit replacement while ensuring concentricity at the spindle interface. The compact 43 mm outer diameter and configuration for right‑hand rotation make it suitable for conventional drill heads and many light‑duty CNC spindles requiring a secure, compact clamping solution. Reduced changeover time translates into lower setup downtime and more productive machining hours per shift, supporting a measurable efficiency gain across small‑batch and repeat production. Built for longevity and straightforward maintenance All wear components are hardened, ground and replaceable, which simplifies service and extends working life under heavy duty cycles. The chuck’s construction for high continuous loading means fewer unplanned stoppages and a lower cost of ownership over time. For operations seeking predictable maintenance intervals, the modularity of the wear parts supports fast on‑bench servicing. Backed by Metav Werkzeuge’s distribution and technical knowledge, this chuck is positioned as a dependable toolholder for workshops and light industrial use where uptime and precision matter. Contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed compatibility checks and procurement support for the ALBRECHT SBF quick‑change drill chuck Technical data Article number: 4120167208NW Manufacturer: ALBRECHT Product type: Schnellspannbohrfutter Facts Clamping range: 0.5–10 mm Outer diameter: 43 mm Mounting: B16 taper Packaging unit: 1 Special features Self‑clamping mechanism Maximum clamping force For right‑hand rotation Designed for high continuous loads All wear parts hardened, ground and replaceable Highest runout accuracy FAQ What clamping range does the chuck cover? The chuck covers a clamping range of 0.5–10 mm, suitable for small to medium twist drills and tool shanks. Is the chuck suitable for B16 taper spindles? Yes — the ALBRECHT SBF quick‑change drill chuck is supplied with a B16 taper mounting for direct fitment to compatible spindles. Can worn components be replaced on site? Worn parts are hardened, ground and replaceable, allowing straightforward maintenance and part exchange to restore original performance. Is the chuck intended for continuous, heavy use? The design specifies suitability for high continuous loading and combines robust construction with maximum clamping force for reliable operation in demanding workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Quick-Change Drill Chuck 1-13mm Self-Tightening Light Duty B12 Cone Mount Right-Hand - RÖHM
Data inconsistency: the manufacturer "RÖHM" is not listed in the provided manufacturer overview; unable to generate the product description. This issue arises when the necessary reference data, such as the manufacturer details, is incomplete or missing from the database or overview being used. Without the inclusion of "RÖHM" in the manufacturer overview, it becomes impossible to accurately create or generate a product description that aligns with the required standards or expectations. Ensuring that all relevant manufacturers are properly listed and accounted for in the database is crucial to avoid such inconsistencies and to maintain the accuracy and reliability of the generated product descriptions.
150mm Quick-Change Drill Chuck 1.5–13mm, 1/2”‑20 Thread, Right/Left Rotation - RÖHM
Combining a robust metal housing with a 1.5–13 mm keyless clamping range and a 1/2"‑20 mount, this quick-change chuck delivers dependable operation for cordless and mains drills; order the EXTRA80-RV directly via Metav Werkzeuge or consult the advisors for application guidance. EXTRA80-RV keyless quick-change chuck by RÖHM – 1.5–13 mm, 1/2"‑20 The EXTRA80-RV is a keyless quick-change chuck engineered for general workshop and industrial use, offering radial locking and compatibility with both cordless drills and mains machines. Metal housing with radial lock Keyless clamping 1.5–13 mm Suitable for cordless and mains drills Carbide jaw faces and dust protection Robust construction for consistent clamping and long service life The chuck combines a metal housing and a radial locking mechanism to provide stable, repeatable clamping under varying loads. The 1.5–13 mm clamping range covers the most common drill shank sizes, while the 1/2"‑20 mounting thread ensures compatibility with a wide range of drill spindles. Thanks to the solid construction, users benefit from reduced runout and reliable grip, which contributes to improved hole quality and less time spent re‑setting tools. This results in a measurable increase in operational efficiency, particularly where frequent bit changes are required. Versatile operation for forward and reverse applications Designed for both right- and left-hand rotation, this chuck suits applications that demand reversing, such as certain screwdriving or tapping setups. It is described as impact-drill resistant, making it appropriate for use with percussion-capable mains drills and most cordless drill/drivers that include hammer settings. The quick‑change, keyless design allows rapid bit swaps without tools, maintaining workflow momentum and reducing downtime. This functional versatility supports a broad range of workshop tasks from light assembly to routine drilling operations. Low maintenance and durable contact surfaces The chuck features carbide jaw faces to resist wear where the jaws contact the tool shank, and an integrated dust protection element to reduce contamination from chips and debris. It is through-drilled, enabling clearance for long drill bits or for coolant/air flow in certain setups. The modest external diameter (outer diameter 42.7 mm) gives a compact footprint at the tool nose, improving access in confined spaces. These design choices reduce the frequency of maintenance and prolong the service life of both the chuck and the cutting tools it holds. Practical benefits for workshop and industrial use As a quick-change chuck with radial lock and carbide‑faced jaws, the EXTRA80-RV combines ease of use with industrial robustness. Its suitability for cordless and mains equipment supports flexible tool inventories and reduces the need for multiple chucks. For operations that require swift bit changes and reliable clamping under reversing conditions, this chuck delivers a clear productivity advantage. The compact design also aids precision work close to workpiece fixtures or in tight assemblies, making it a pragmatic choice for technicians and maintenance professionals alike. For dependable clamping with RÖHM quality and fast delivery from Emmerich, contact Metav Werkzeuge to discuss the EXTRA80-RV and its application-specific fit; our technical advisors provide clear guidance and supply direct from stock. Technical Data Article number: 4000832112NW Type: EXTRA80-RV Brand: RÖHM Mount: 1/2” - 20 Clamping range: 1.5–13 mm Outer diameter: 42.7 mm Rotation: Right and left rotation Packaging unit: 1 Facts Clamping range: 1.5–13 mm Mount thread: 1/2"‑20 Outer diameter: 42.7 mm Packaging unit: 1 Special features Metal housing Radial lock For cordless drills and screwdrivers Mains drills with self-acting compensation Impact-drill resistant Dust protection Through-drilled Jaw faces of the jaws made of carbide Suitable for right- and left-hand rotation FAQ Is this chuck compatible with impact‑capable drills? The EXTRA80-RV from RÖHM is specified as impact-drill resistant and is intended for use with both cordless and mains drills; compatibility with high‑torque impact drivers should be verified against the specific tool manufacturer’s guidelines. Does the chuck require a key for tightening? No, the EXTRA80-RV is a keyless quick-change chuck, allowing tool-free bit changes within the 1.5–13 mm range for faster workflow and fewer accessories. How is the chuck mounted to a drill spindle? Mounting is by a 1/2"‑20 threaded connection; secure the chuck to the spindle according to the drill manufacturer’s instructions to ensure correct seating and safe operation (SKU 4000832112NW). Can the chuck be used in reversing applications? Yes, the chuck supports right‑ and left‑hand rotation and is designed to retain clamping reliability when the drill is run in both directions. What maintenance does the chuck need? The chuck benefits from occasional cleaning and light lubrication of the jaws and bore; the carbide jaw faces and dust protection reduce wear and contamination, extending service intervals for workshop use. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Quick-Change Drill Chuck 3-16mm Self-Clamping MK4 For Right-Hand Rotation, 56mm OD - ALBRECHT
Take advantage of the compact design and self-tightening SBF-plus mechanism to improve drilling stability and reduce rework; its MK4 mounting and 3–16 mm clamping range make it a practical choice for workshop spindles — order the ALBRECHT SBF-plus directly via Metav Werkzeuge or consult our specialists for compatibility advice. ALBRECHT SBF-plus quick-change drill chuck (3–16 mm, MK4, right-hand rotation) The ALBRECHT SBF-plus is a self-tightening quick-change drill chuck with an MK4 shank, designed for precise, right-hand rotation drilling in general workshop and industrial applications. Self-tightening SBF-plus design Clamping range 3–16 mm MK4 shank with integrated Morse taper Compact build for high runout accuracy Precision and productivity through compact, self-tightening engineering The SBF-plus model delivers a noticeable improvement in drilling consistency thanks to its self-tightening mechanism and compact design, which together reduce axial play and vibration. The result is high runout accuracy, fewer rejects and less reworking, which directly contributes to more efficient production cycles. Because the chuck secures twist drills and reamers evenly across the 3–16 mm clamping range, machining operations remain stable even at higher speeds, translating into reliable hole quality and repeatability. Secure mounting and straightforward fitting for workshop spindles Fitted with an MK4 shank that incorporates an integrated Morse taper, this chuck establishes a secure spindle interface that minimises slippage and improves torque transfer. The unit’s single-piece construction—where chuck and shank effectively form one assembly—simplifies installation and reduces alignment variables during setup. The compact outer diameter of 56 mm keeps the tool envelope small, supporting access in confined workspaces while maintaining the mechanical rigidity expected in professional settings. Designed for right-hand rotation, the mounting is optimised for standard drilling spindle directions. Operational benefits, handling and maintenance The quick-change concept of the SBF-plus reduces tool-change times and supports steady workflow, while the self-tightening action improves safety under load by maintaining clamping force during operation. Routine upkeep is straightforward: periodic inspection and light lubrication where recommended will sustain the chuck’s performance without complex service interventions. As a practical workshop solution, the chuck balances usability with robust engineering, offering dependable performance for daily drilling tasks and serial production runs. For secure, precision drilling with the ALBRECHT SBF-plus, choose Metav Werkzeuge for dependable supply and technical guidance — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to confirm fitment and place an order Technical data Article number: 4000832534NW Product type: Quick-change drill chuck (SBF-plus) Brand: ALBRECHT Mounting: MK4 Facts Clamping range: 3–16 mm Outer diameter: 56 mm Rotation direction: right-hand rotation Special features Integrated Morse taper in shank Self-tightening mechanism Chuck and shank form a single unit Compact construction for improved runout accuracy FAQ What clamping range does the chuck cover? The ALBRECHT SBF-plus covers a 3–16 mm clamping range suitable for most small to medium twist drills and reamers. How is the chuck mounted to the spindle? Mounting is via an MK4 shank with an integrated Morse taper, ensuring secure seating in compatible spindles. Is this chuck suitable for left-hand rotation machines? The SBF-plus is specified for right-hand rotation only and is not designed for continuous left-hand use. What maintenance does the chuck require to keep runout low? Regular inspection, light lubrication at recommended intervals and checking for wear will maintain the chuck’s high runout accuracy and reliable clamping. Can the chuck be used for reaming as well as drilling? Yes, the 3–16 mm clamping range and secure self-tightening action make the chuck appropriate for reaming and other common holemaking tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Quick-Change Drill Chuck Supra S Self-Clamping Light-Duty 3–16mm, B18 For Right-Hand Rotation - RÖHM
The combination of self‑tightening clamping, a 3–16 mm capacity and a B18 taper ensures fast, reliable bit changes and secure operation in hand‑held drilling applications; order the Supra S quick‑action drill chuck via Metav Werkzeuge or request expert advice. Supra S keyless drill chuck (B18 taper) by RÖHM — 3–16 mm, self‑tightening The Supra S keyless drill chuck for light‑duty, hand‑held machines provides secure, self‑tightening clamping on a B18 taper for right‑hand rotation. Self‑tightening for secure clamping Clamping range 3–16 mm B18 taper mount for quick fitting Designed for right‑hand rotation Secure clamping that reduces slippage and downtime The chuck's self‑tightening mechanism converts spindle torque into a firmer grip on the tool shank, improving retention during drilling. With a 3–16 mm clamping range, the unit accommodates common twist drills and driver bits, reducing the need for frequent tool swaps. This results in fewer stoppages for re‑clamping and a smoother workflow for technicians needing reliable bit fixation in light‑duty tasks. Quick changes with a B18 taper for faster setup Fitted with a B18 taper, the chuck enables fast mounting and removal on compatible spindles, shortening machine setup times. The 46 mm outer diameter offers a compact footprint while maintaining stability, which benefits operations where accessibility is limited. For shops prioritising uptime, the design offers a practical balance between swift tool changes and consistent concentricity. Optimised for portable use and right‑hand rotation Engineered as a light‑duty version for hand‑held machines, the chuck is tailored to the demands of portable drilling applications. The specified right‑hand rotation ensures the self‑tightening action functions as intended during standard drilling operations. The quick‑action concept eliminates the need for a key, simplifying handling and supporting faster, safer bit replacement in service and maintenance environments. Practical advantages for workshops and maintenance teams The compact, robust design suits routine workshop tasks and on‑site maintenance where speed and reliability matter. The chuck's construction focuses on consistent performance with common tool sizes, making it a useful addition to general clamping toolkits. Backed by RÖHM’s manufacturing standards and supplied via Metav Werkzeuge, it aligns with professional expectations for repeatable results in daily operations. For secure, fast clamping choose the RÖHM Supra S keyless drill chuck and contact Metav Werkzeuge in Emmerich for tailored advice and reliable delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000832205NW Manufacturer: RÖHM Product type: keyless drill chuck Model: Supra S Dimensions & Performance Clamping range: 3–16 mm Outer diameter: 46 mm Taper mount: B 18 Packaging unit: 1 Designs / Special features Self‑tightening Light‑duty version For hand‑held machines Right‑hand rotation FAQ Is this chuck suitable for hand‑held drills? The Supra S keyless drill chuck is specified as a light‑duty unit for hand‑held machines and is suitable for portable drilling and routine maintenance work. What is the clamping range of the chuck? The chuck accepts tool shanks from 3–16 mm, covering common twist drills and driver bits. Which spindle mounting does it use? Mounting is via a B18 taper, enabling quick fitting on compatible spindles. Can the chuck be used with left‑hand rotation? No, the chuck is designed for right‑hand rotation; the self‑tightening action is intended for that direction. What is the article number for ordering? The article number is 4000832205NW, listed under the RÖHM Supra S keyless drill chuck. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Taper Cleaner MK1 Wooden Body With Leather Pad, For Morse Taper Cleaning - TECWERK
Take advantage of a simple, workshop-friendly cleaning solution that combines a wooden body with a leather trim to remove dust, chips and dirt from machine tapers while protecting mating surfaces; this reduces setup contamination and helps maintain fixture accuracy. Order the taper cleaner directly via Metav Werkzeuge or consult our advisors for specification support. Taper Cleaner MK1 — wooden body, leather-trimmed taper wiper by TECWERK Taper Cleaner MK1 is designed to clean Morse taper MT1 machine tapers quickly and gently, removing dust, chips and contamination to preserve accurate seating and spindle alignment. Wooden body with leather trim Suited for Morse taper MT1 Removes dust, chips and debris Practical for routine workshop maintenance Preserve taper seating and reduce setup errors A dedicated taper wiper prevents contamination that can cause misalignment or premature wear on toolholders and spindles. The wooden body with a leather trim gently engages the taper face to remove dust and swarf without scratching hardened surfaces. Regular use on the machine taper minimises unexpected runout and contributes to consistent machining results, making setups more reliable and repeatable. Robust, workshop-ready construction for everyday use Constructed with a solid wooden body and a leather-bound contact surface, this wiper is deliberately simple yet effective. The natural materials combine durability with a soft interface that avoids abrasive contact on the cone. This design allows for repeated cleaning cycles while maintaining the taper’s finish and reduces the need for frequent corrective maintenance on the spindle nose. Clear compatibility and straightforward application Designed specifically for Morse taper MT1, the cone wiper matches the geometry of the corresponding machine taper to ensure comprehensive cleaning of the contact surfaces and keyways. By keeping the seating faces free from chips and residue, the tool supports accurate clamping and limits the risk of component damage during tool changes. The unit’s uncomplicated form factor makes it suitable for routine use at every machine tool station. Practical benefits for shop-floor efficiency Consistent cleaning with a dedicated taper wiper reduces the likelihood of rework caused by contaminated interfaces and helps sustain toolholder life. The lightweight, low-maintenance design encourages regular use as part of a simple maintenance routine, supporting uptime and predictable production flow. The result is less downtime for cleaning-related faults and a steadier output quality. For workshop purchases or technical guidance on suitability for specific machines, contact Metav Werkzeuge for personalised advice and ordering information via info@metav-werkzeuge.com or by phone; Metav’s specialists will help ensure the right choice for the production environment. Technical data Article number: 4000832881NW Material: wooden body with leather trim Suitable for: Morse taper MT1 Packaging unit: 1 Core measurements Packaging unit: 1 SKU: 4000832881NW Special features For cleaning machine tapers of dust, chips and dirt Wooden body with leather trim Product type: taper cleaner Brand: TECWERK FAQ What is the primary function of this tool? The Taper Cleaner MK1 by TECWERK is intended for cleaning Morse taper MT1 machine tapers, removing dust, chips and dirt with a wooden body and leather trim (SKU 4000832881NW). Which taper size does it fit? The device is specified for Morse taper MT1 and is shaped to match the contact geometry of MT1 machine tapers. What materials are used in its construction? Construction comprises a wooden body with a leather-trimmed contact surface to clean effectively while protecting the taper finish. How is the product supplied? The item is supplied as a single unit; packaging unit: 1 (SKU 4000832881NW). Who is the brand behind the product? The taper cleaner is offered under the TECWERK name (SKU 4000832881NW), distributed via Metav Werkzeuge. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Taper Cleaner SK50 Wooden Body With Leather Face, For Steep Tapers - TECWERK
Take advantage of the combination of practical construction, effective cleaning performance and workshop-grade durability to keep machine tapers free of dust and chips. The leather-trimmed wooden body ensures gentle contact with precision surfaces while reliably removing contaminants — order the taper wiper directly via Metav Werkzeuge or consult our specialists for application advice. Taper wiper SK50 wooden body — leather-trimmed taper cleaner | TECWERK The taper wiper SK50 wooden body is a compact cleaning tool for removing dust, chips and dirt from steep SK50 machine tapers, suitable for routine maintenance in workshops and toolrooms. Wooden body with leather trim Designed for steep SK50 tapers Cleans dust, chips and machine residue Workshop-grade, durable construction Maintain accurate seating and reduce setup errors with clean tapers A clean taper seating is a small measure that delivers a clear operational benefit: consistent clamping and repeatable tool positioning. The taper wiper SK50 wooden body combines a robust wooden body with a soft leather trim to remove fines and swarf without scratching mating surfaces. Regular use removes debris from the steep SK50 cone, which helps eliminate wobble and misalignment during setup. This practical, low-technology tool supports productivity by reducing time spent correcting seating faults and helps keep production running smoothly. Robust, simple design built for frequent workshop use The simple design prioritises function and longevity: a solid wooden handle provides a tactile grip and mechanical resilience, while the leather edge conforms to taper geometry to sweep away contaminants effectively. Because the construction is deliberately uncomplicated, maintenance demands are low and the component is easy to inspect and replace when worn. The combination of wooden body and leather trim offers a balance between gentle surface contact and reliable debris removal, making it a sensible choice for everyday maintenance in busy machining environments. Practical handling, safe storage and gentle surface contact The taper cleaner is conceived for straightforward handling and safe storage at the bench or in a tooling drawer. Its materials are selected for gentle interaction with metal tapers so that precision seats are preserved during cleaning operations. Clear handling routines — wipe the taper with the leather edge along the cone and remove accumulated swarf from the leather before storage — maintain cleaning performance and prevent cross-contamination. For facilities seeking an economical, low-impact means of protecting spindle and toolholder interfaces, this taper wiper presents a pragmatic, workshop-oriented solution. For application guidance or to order the TECWERK taper wiper for SK50 tapers, contact Metav Werkzeuge in Emmerich for expert advice and reliable supply. Technical data Article number: 4000832888NW SKU: 4000832888NW Product name: Taper wiper SK50 wooden body Product type: Taper wiper Manufacturer: TECWERK Facts Packaging unit: 1 UID: 4000832888NW Special features Material: wooden body Leather trim for gentle cleaning Suitable for steep taper SK50 Removes dust, chips and dirt from machine tapers FAQ What tapers is this wiper compatible with? The taper wiper is designed specifically for steep SK50 tapers and is recommended for cleaning spindle and holder tapers of that standard. How does the leather trim affect cleaning performance? The leather trim on the wooden body conforms to the taper profile to sweep away dust and chips while minimising surface abrasion on precision mating seats. Is the tool suitable for daily use in a production environment? Yes, the simple wooden construction and replaceable leather edge make the tool durable and suitable for routine workshop cleaning tasks with the TECWERK taper wiper (SKU 4000832888NW). How should the taper wiper be maintained? Remove collected swarf from the leather after each use and store the tool dry; replace the leather trim if it becomes saturated with residues that cannot be cleaned. Will this tool damage hardened or finished tapers? When used as intended, the wooden body with leather trim is designed to be gentle on finished taper surfaces while removing loose contaminants. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Tooth-Ring Drill Chuck Prima Keyed 1.0-16mm B18 Reversible Right-Hand - RÖHM
Robust clamping and impact resistance ensure reliable, repeatable drilling in stationary applications; the 1.0–16 mm clamping range together with a B18 taper and keyed S3 operation provide secure tool retention and simple handling. Order the Prima geared drill chuck directly via Metav Werkzeuge or contact our consultants for specification support. Prima Geared Drill Chuck — B18 taper, 1.0–16 mm clamping range (RÖHM) The Prima geared drill chuck is a heavy-duty, keyed chuck for stationary machines, designed for right-hand rotation and fitted to a B18 arbor for secure mounting. Heavy-duty industrial construction Clamping range 1.0–16 mm B18 taper for stable mounting Impact-resistant with S3 key Precision clamping for consistent drilling results The geared chuck offers precise clamping across its 1.0–16 mm range, which keeps centre runout low and maintains repeatability in batch drilling tasks. The geared mechanism multiplies hand torque, enabling consistent tightening without excessive effort; this is particularly useful when operating larger-capacity chucks on bench or floor drills. By choosing a keyed, geared solution, operators benefit from reproducible clamping force that reduces tool slippage and improves hole quality, making the chuck suitable for production and maintenance workshops where reliability matters. Built for heavy-duty, stationary use Constructed as a heavy industrial version for stationary machines, this chuck is impact-resistant and compatible with hammer-action environments while remaining optimised for standard drilling spindles. The inclusion of a DIN 238 taper ensures a stable connection to the machine spindle, reducing runout and vibration under load. Such mechanical robustness lengthens service intervals and reduces unplanned downtime, which is a tangible productivity advantage in workshop and light-industrial settings where machines run for extended periods. Simple, secure keyed operation for safe handling Keyed operation with a S3 key delivers fast, secure tightening and straightforward maintenance. The key-controlled tightening method provides greater clamping torque than a plain hand-tight chuck, ensuring firm engagement with the drill shank and minimising the risk of slippage during arduous tasks. The keyed interface is also easier to inspect and service: worn teeth can be identified and serviced promptly, supporting safe operation and predictable performance in repeated-use environments. Compatibility and mounting explained for clearer integration Fitted to a B18 arbor and designed for right-hand rotation, this geared drill chuck integrates directly with many standard spindles and arbors used in workshop drill presses and pillar drills. The taper conforms to established standards, simplifying changeover and alignment. When specifying mounting adapters or checking spindle compatibility, reference the chuck’s taper and clamping range to ensure correct pairing and optimal concentricity. The SKU 4000832050NW identifies this exact configuration for ordering and inventory purposes. For reliable, high-torque clamping choose the RÖHM Prima geared drill chuck — contact Metav Werkzeuge for supply and tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000832050NW Product: Geared drill chuck Model: Prima Facts Clamping range: 1.0–16 mm Arbor: B18 Key size: S 3 Rotation: Right-hand Packaging unit: 1 Special features DIN 238 taper Impact-resistant (suitable for hammer drilling) Heavy industrial version for stationary machines Keyed operation (S3) FAQ Is this chuck suitable for production drill presses? The Prima geared drill chuck from RÖHM is built as a heavy industrial version for stationary machines and is therefore suitable for production drill presses. What clamping range does the chuck cover? The chuck covers a 1.0–16 mm clamping range, which makes it versatile for a wide range of drill shank sizes. Which arbor does the chuck require? This geared chuck mounts to a B18 arbor and includes a DIN 238 taper for stable connection to compatible spindles. How is the chuck tightened and secured? Tightening is performed with the supplied S3 key, providing secure, repeatable clamping suitable for intensive workshop use. What is the SKU for ordering this configuration? The SKU for the RÖHM Prima geared drill chuck in this configuration is 4000832050NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
156mm Morse Taper MT4 Shank With B16 Drill Chuck Taper, Hardened And Ground - TECWERK
Take advantage of a hardened and ground taper arbor with DIN 238 drill‑chuck taper and MK4 external cone to ensure precise, repeatable chuck mounting; order directly via Metav Werkzeuge or consult our specialists for application advice. Kegeldorn MK4xB16 – Taper arbor, hardened and ground (TECWERK) The Kegeldorn MK4xB16 is a hardened and ground taper arbor designed for mounting drill chucks on drilling and turning machines, offering standardised compatibility with DIN 238 fittings. DIN 238 drill-chuck taper compatibility Fully hardened and ground finish Morse taper MK4 external cone Overall length 156 mm for deep reach Precision mounting that reduces runout and setup time The hardened and ground construction delivers a consistent seating surface that minimises radial runout and wobble when mounting a chuck. With the MK4 external cone and the B16 drill‑fitting interface, the arbor aligns to recognised workshop standards, enabling reliable transfer of torque and accurate concentricity. This precision reduces rework and shortens setup time on both drill benches and lathes, improving throughput without sacrificing component quality. Robust design for frequent use and long service life Manufactured in a fully hardened and ground execution, the taper arbor resists wear from repeated chuck changes and torque transmission, supporting repeatable performance across many cycles. The careful finishing preserves taper geometry, which prolongs the life of mating chucks and the machine spindle. For workshops that demand durability and consistent results, the resilient construction means fewer replacements and lower downtime over the tool’s service life. Simple integration, clear specification and safe handling The arbor’s DIN 238 drill‑chuck taper and clear shank specification (B16) make selection straightforward for maintenance and tooling departments; compatibility with standard chucks avoids custom adaptors. The overall length of 156 mm provides sufficient engagement for secure mounting while maintaining accessibility for tightening and release. Routine inspection of the taper face and light lubrication of contact surfaces are sufficient to keep performance within tolerance; where higher precision is required, the hardened and ground finish supports runout checks and calibration processes. For tailored application advice or to secure this TECWERK taper arbor for the workshop, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will confirm suitability and delivery options. Technical Data Article number: 2000832346NW Standard: DIN 238 Brand: TECWERK Product type: taper arbor Shank connection: B16 External cone: MK4 Overall length: 156 mm Facts Execution: fully hardened and ground Intended for mounting drill chucks Packaging unit: 1 Special features Drill‑chuck taper to DIN 238 Hardened and ground finish for wear resistance Suitable for drilling and turning machines FAQ What taper and shank does this arbor use? The taper arbor uses an MK4 external cone and a B16 shank interface, matching the DIN 238 drill‑chuck taper specification. Is the arbor suitable for repeated mounting and removal of chucks? Yes, the TECWERK taper arbor is fully hardened and ground, designed for repeated use while maintaining taper geometry and low runout. What is the overall length and how does it affect reach? The overall length is 156 mm, which offers increased reach for deeper mounting depths while preserving secure engagement. How does the hardened and ground finish benefit workshop accuracy? The hardened and ground finish ensures a uniform seating surface, reducing radial runout and improving repeatability when mounting chucks. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
156mm Reducer Sleeve MK5 to MK2 Hardened Ground, DIN 2185 - TECWERK
Take advantage of a DIN 2185-compliant taper adapter that combines fully hardened construction and precision ground surfaces for secure tool seating and long service life; order through Metav Werkzeuge for reliable delivery and expert advice. Reduction sleeve DIN 2185 MK5 to MK2 — hardened and ground, 156 mm length (TECWERK) The Reduction sleeve DIN 2185 MK5 to MK2 is a taper adapter designed to adapt MK5 holders to MK2 tooling, providing a robust connection for machining and toolholding applications. DIN 2185-compliant taper adapter Fully hardened steel construction Inside and outside precision ground Adapts MK5 holders to MK2 tooling Consistent concentricity through hardened, ground manufacture The taper adapter is produced to DIN 2185 tolerance standards and is fully hardened, ensuring dimensional stability under repeated loading. The inner and outer surfaces are precision ground, which reduces radial runout and improves tool retention compared with untreated or hand-finished parts. For machining processes where repeatability is essential, the hardened and ground finish maintains seating accuracy over many tool changes and minimises the risk of premature wear or loosening. Straightforward compatibility and practical workshop benefits As a taper adapter for Morse taper systems, the component converts an MK5 holder to accept MK2 tooling, simplifying inventory and enabling the use of smaller shank tools in larger spindles. The total length of 156 mm provides a secure engagement depth without excessive overhang, improving rigidity during turning, drilling or reaming tasks. For readers unfamiliar with the term: a Morse taper is a self-locking conical interface used to hold tooling with a matching taper, offering a fast and dependable mechanical fit without additional clamping devices. Durable performance with low maintenance for industrial use Constructed for heavy-duty workshop and industrial service, the adapter’s fully hardened body and precision ground faces reduce the frequency of regrinding and replacement, lowering lifecycle costs. The robust design supports high clamping forces and preserves concentricity, which benefits surface finish and tool life. Simple inspection and routine cleaning are sufficient to maintain performance; correct seating on clean mating tapers is the key to consistent results and safe operation in production environments. For taper adaptation from TECWERK with assured precision, contact Metav Werkzeuge in Emmerich for personalised advice and prompt supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000832359NW Name: Reduction sleeve DIN 2185 MK5 to MK2, hardened and ground (TECWERK) Product type: Reduction sleeve Standard: DIN 2185 Facts Total length: 156 mm Inner taper: MK2 Outer taper: MK5 Packaging unit: 1 Special features Fully hardened execution Inside and outside precision ground Designed for tools with Morse taper Execution: hardened and ground FAQ How does the taper adapter affect runout and concentricity? The adapter is manufactured to DIN 2185 and, being precision ground, the Reduction sleeve DIN 2185 MK5 to MK2 reduces radial runout and improves concentricity compared with non-ground alternatives. Can this adapter be used for heavy-duty turning operations? Yes, the fully hardened construction and 156 mm engagement length mean the adapter is suitable for many heavy-duty workshop operations where secure tool seating is required. What does MK5 to MK2 compatibility mean in practice? It means the adapter converts an MK5 spindle or holder to accept MK2-tapered tooling, allowing a workshop to run smaller-diameter tools in larger taper holders without specialised collets. Is any special maintenance required to keep the adapter accurate? Routine cleaning and visual inspection are sufficient; ensure mating tapers are free from chips and contamination to maintain the adapter’s performance. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
156mm Reducer Sleeve MK5 to MK3 Hardened And Ground, DIN 2185 - TECWERK
Take advantage of the combination of DIN 2185 conformity, a fully hardened and ground finish and a secure fit between MK5 and MK3 tapers for dependable spindle-to-tool transitions; order the reducer sleeve directly via Metav Werkzeuge or consult our technical advisers for compatibility checks. Reducing sleeve DIN 2185 MK5×MK3 (hardened, ground) – TECWERK A reducing sleeve Reducing sleeve DIN 2185 MK5×MK3 (hardened, ground) designed to adapt tools with Morse taper connections while maintaining concentricity and mechanical integrity. DIN 2185 standard compliance Hardened and ground inside and out Fits Morse tapers MK5 to MK3 Total length 156 mm Dependable tolerance and machining accuracy The reducer conforms to DIN 2185, providing a standardised interface that supports repeatable seating and alignment. The hardened construction combined with inside and outside ground surfaces minimises radial play and helps reduce runout at the tool tip. This predictability turns into measurable time savings during setup and fewer rejected parts in repetitive production runs, making the component suitable for precision toolrooms and everyday workshop use. Seamless compatibility with Morse taper tooling Designed specifically for adapting between MK5 and MK3 tapers, the sleeve enables older or mixed tooling to be used without remachining spindles or toolholders. The internal and external ground finishes ensure a snug mechanical fit with morse taper shanks, so retention and torque transmission remain consistent under load. For workshops that frequently change tooling, this adapter avoids the cost and downtime of dedicated holders while keeping spindle concentricity intact. Durable construction reduces maintenance needs The sleeve’s fully hardened body resists surface fatigue and wear from repeated insertion and withdrawal cycles, extending service life under typical machining conditions. Ground mating faces preserve precision over time, reducing the need for frequent regrinding or replacement. The result is a low-maintenance solution that retains accuracy and contributes to predictable maintenance intervals in production environments. Practical integration and everyday workshop benefits With a total length of 156 mm, this adapter provides sufficient engagement length to ensure secure contact between both tapers while remaining compact for typical lathe and drill press workflows. Supplied as a single unit, it is simple to store and deploy as required. Metav’s quality screening for the European market ensures consistent product checks at the Emmerich facility, and the component is particularly well suited to repair shops, prototyping benches and industrial maintenance departments that prioritise reliability and interchangeability. Contact Metav Werkzeuge for tailored advice on compatibility and to secure the TECWERK hardened, ground reducing sleeve; Metav Werkzeuge can confirm suitability for specific spindles and arrange prompt dispatch from Emmerich Technical Data Article number: 2000832360NW Label: Reduzierhülse DIN 2185 MK5xMK3 geh.u.geschl.TECWERK Manufacturer: TECWERK Facts Standard: DIN 2185 Total length: 156 mm Inner taper: MK3 Outer taper: MK5 Packaging unit: 1 Special features Hardened and ground inside and out Suitable for tools with Morse taper Execution: hardened and ground FAQ What tapers does the adapter connect? The reducing sleeve connects an outer MK5 taper to an inner MK3 taper, enabling use of MK3 shank tools in MK5-equipped spindles. Is the sleeve suitable for high-speed spindle use? The hardened and ground surfaces of this TECWERK reducing sleeve support stable seating; final suitability for high-speed applications should be assessed against machine spindle specifications and operating speeds. How does the DIN 2185 standard affect compatibility? Compliance with DIN 2185 ensures standardised dimensions and fit quality, making the adapter predictable in seating behaviour with other components manufactured to the same norm. Will the sleeve reduce tool runout? Accurate ground mating faces help to minimise runout by improving concentric contact between the tapers, which contributes to better machining accuracy compared with unrefined adapters. What is the total engagement length of the sleeve? The total length is 156 mm, providing robust engagement for reliable mechanical contact between both tapers. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
160mm Extension Sleeve MK2 to MK1 Hardened Ground DIN 2187, 20mm Diameter - TECWERK
Take advantage of the combination of DIN 2187 conformity, a fully hardened and ground construction, and a precise MK2→MK1 Morse taper interface for reliable tool holding and repeatable results. Order the extension sleeve directly via Metav Werkzeuge or ask our consultants if needed. Extension sleeve DIN 2187 MK2→MK1, hardened and ground (TECWERK) The Extension sleeve DIN 2187 MK2→MK1 is an adaptor sleeve for extending Morse-taper tooling, designed for secure seating of tools with a Morse taper in workshop and industrial settings. DIN 2187-compliant accuracy Hardened and ground internal and external Morse taper interface MK2 to MK1 Overall length 160 mm, diameter 20 mm Secure taper interface for consistent tool seating The sleeve provides a Morse taper MK2 to MK1 connection that secures tools with a Morse taper and reduces runout during machining. By following DIN 2187, the component ensures repeatable taper engagement and positioning, which supports consistent drilling and reaming results. The adaptor is intended for use where a rigid, accurately aligned connection is needed between machine spindle and toolholder. Durable, fully hardened and precision-ground construction Manufactured in a hardened and ground finish both internally and externally, the adaptor resists wear from repeated fitting and removal. The full hardening process combined with precision grinding improves contact accuracy and longevity, maintaining a stable seating over extended service life. This construction minimises slop and contributes to stable cutting performance under standard workshop conditions. Practical dimensions for versatile workshop use With an outer diameter of 20 mm, an overall length L2: 160 mm and an inner working length L1: 85 mm, the sleeve balances reach with rigidity. These dimensions make it suitable for extending tooling where additional length is required without significant compromise on stability. The compact profile and standard taper interface aid compatibility with typical Morse-taper tooling arrangements used in many shops. Benefit-driven reliability for production and maintenance The adaptor’s accuracy execution per DIN 2187 contributes to predictable process behaviour and easier setup times, which supports efficient workshop workflows. The hardened and ground surfaces reduce the frequency of fit-related adjustments and help preserve spindle and tooling surfaces, which in turn lowers maintenance demands and supports uptime. For stock availability, technical matching or immediate purchase of the TECWERK DIN 2187 extension sleeve, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for expert advice and reliable supply Technical Data Article number: 2000832315NW Manufacturer: TECWERK Norm: DIN 2187 Product type: Extension sleeve Dimensions Overall length L2: 160 mm Working length L1: 85 mm Diameter D: 20 mm Features Taper interface: MK2 to MK1 Fully hardened and ground internally and externally Accuracy execution according to DIN 2187 Packaging unit: 1 FAQ Which tapers does the sleeve adapt? The TECWERK extension sleeve adapts a Morse taper MK2 to MK1, providing a secure MK2→MK1 taper interface (SKU 2000832315NW). Is the sleeve suitable for precision tooling? Yes — the sleeve is manufactured hardened and ground and conforms to DIN 2187, so it is suited to precision operations where consistent taper seating is required. What are the main dimensions to check for compatibility? Key dimensions are an overall length 160 mm, a working length 85 mm, and a diameter of 20 mm; verify these to ensure proper fit in the intended setup. How does the DIN 2187 specification affect performance? Compliance with DIN 2187 indicates defined accuracy classes and machining tolerances, helping to ensure repeatable engagement and reduced runout for Morse-taper tooling. Can the sleeve withstand frequent tool changes? The fully hardened and ground construction is designed to resist wear from repeated fitting and removal, increasing service life under normal workshop use. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
164mm Morse Taper MT4 Tapered Arbor Hardened And Ground With Drill Chuck Taper DIN 238 - TECWERK
Take advantage of the hardened and ground construction together with a DIN 238 drill‑chuck taper for reliable chuck retention and long service life; the compact MT4 to B18 taper interface ensures straightforward integration into existing machine spindles. Order directly via Metav Werkzeuge or contact our advisors for compatibility guidance. Morse taper mandrel MT4 → B18 — hardened and ground, DIN 238 drill‑chuck taper (TECWERK) The Morse taper mandrel MT4 to B18 forms a precision interface for mounting drill chucks on drilling and turning machines, combining standardised taper geometry with a hardened, ground finish for consistent performance Morse taper MT4 shank DIN 238 drill‑chuck taper Hardened and ground finish 164 mm overall length Secure chuck mounting that keeps tools concentric The tapered interface delivers a precise mechanical fit, reducing run‑out and improving hole quality when using a mounted chuck. Fitted to a standard MT4 shank and finished to the DIN 238 drill‑chuck taper, this mandrel provides a repeatable connection between spindle and accessory. The result is consistent concentricity, which directly affects drilling accuracy and tool life; the hardened and ground surface minimises wear on both the mandrel and the mounted chuck, preserving alignment over many cycles. Robust construction for continuous workshop use Manufactured with a hardened and ground execution, the mandrel resists deformation and surface fatigue under regular load. The tough finish lowers the risk of fretting and galling where taper meets taper, extending the service interval of both accessory and spindle. For production environments and maintenance shops alike, that durability translates into predictable uptime and fewer interruptions for re‑alignment or replacement, supporting a smoother workflow on machining centres and bench machines. Clear compatibility and easy integration Engineered to accept drill chucks via the DIN 238 taper and to seat in an MT4 spindle, the component simplifies tool changeovers in mixed‑equipment shops. The male B18 fitting matches common spindle sockets, and the 164 mm overall length provides sufficient engagement without excessive overhang. For users unfamiliar with taper nomenclature: MT4 refers to Morse taper size 4, a widely adopted standard; DIN 238 specifies the drill‑chuck arbor form used to secure chucks by taper seating. This clarity helps reduce selection errors and ensures the mandrel integrates with existing tooling. Practical benefits for purchasing and workshop management Choosing a hardened taper mandrel reduces the need for frequent replacements and supports predictable process outcomes—an economic advantage over time for high‑volume or precision work. The standardised interfaces mean spare parts and mounted chucks remain interchangeable across machines, simplifying stockkeeping and reducing the variety of components in the toolroom. Where installation or fitment questions arise, Metav Werkzeuge’s product information and technical team can advise on compatibility and best practice for mounting and maintenance. For reliable chuck retention and long service life, order the TECWERK MT4→B18 taper mandrel via Metav Werkzeuge or contact Metav Werkzeuge’s advisors at info@metav-werkzeuge.com / +49 2822 7131930 to confirm fitment and application suitability Technical data SKU: 2000832348NW Standard: DIN 238 Brand: TECWERK Product type: Taper mandrel Facts Overall length: 164 mm Packaging unit: 1 Special features Morse taper: MT4 Spindle fitting: B18 Drill‑chuck taper: DIN 238 Execution: hardened and ground Application: for mounting drill chucks on drilling and turning machines FAQ What spindles is the mandrel compatible with? The mandrel is designed to seat in an MT4 taper and to accept a drill chuck via the DIN 238 drill‑chuck taper; compatibility should be checked against the machine spindle and chuck arbor dimensions. Is the mandrel suitable for heavy production use? Yes, the hardened and ground execution provides enhanced wear resistance, making the mandrel suitable for regular workshop and light production environments. How does DIN 238 affect chuck selection? DIN 238 defines the taper form for drill chucks; selecting a chuck with a matching DIN 238 arbor ensures a secure, concentric fit when mounted on the mandrel. Can the mandrel reduce run‑out compared with non‑taper adapters? A precision tapered seat such as MT4, when properly fitted, offers improved concentricity and repeatability compared with loose or improvised adapters, resulting in lower run‑out. Which SKU identifies this item for ordering? This item is listed under SKU 2000832348NW and is the TECWERK taper mandrel MT4→B18 designed for DIN 238 drill‑chuck seating. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
171mm Reducing Sleeve MK5 to MK4 Hardened Ground DIN 2185 - TECWERK
Benefit from a robust adapter that combines DIN 2185 conformity with a fully hardened and ground finish and a precise MT5-to-MT4 taper transition for secure toolholding and minimal runout. The sleeve’s 171 mm overall length and internal/external machining ensure stable seating for Morse taper tools; order the reducing sleeve directly via Metav Werkzeuge or consult the team for application-specific guidance. Reducing sleeve DIN 2185 MT5→MT4 — TECWERK The Reducing sleeve DIN 2185 MT5→MT4 adapts tools with a Morse taper shank to larger machine tapers, offering a hardened and ground connection for reliable machining in workshops and industrial toolrooms. DIN 2185 compliant reducing sleeve Hardened and ground inside and out Adapts MT5 spindles to MT4 tools Total length 171 mm Precision fit for repeatable toolholding The adapter is manufactured to the DIN 2185 standard, which governs dimensions and tolerances for taper adapters; this guarantees a consistent interface between spindle and tool shank. With both the internal and external surfaces hardened and ground, the component reduces the risk of slippage and maintains concentricity under load. For production environments where repeatable positioning is essential, the hardened, ground finish delivers tangible improvements in runout stability and tool life. Versatile compatibility across machine applications Designed as a taper transition from MT5 (outer taper) to MT4 (inner taper), the sleeve permits the use of smaller-shank tooling in larger spindles without modifying fixtures or holders. The adapter’s 171 mm overall length provides sufficient engagement for secure seating while preserving access to cutting tools. The solution is suitable for turning, drilling and reaming tasks where Morse taper shanks are standard, making it a practical choice for maintenance shops and production lines alike. Durable construction that simplifies workshop logistics The component’s execution as a fully hardened and ground sleeve reduces surface wear and the need for frequent replacements, contributing to lower downtime and predictable maintenance intervals. By standardising on DIN-compliant adapters, procurement benefits from interchangeability and fewer bespoke parts. This approach supports efficient inventory management in toolrooms and helps streamline operations while assuring the mechanical integrity expected in demanding machining contexts. Contact Metav Werkzeuge for a specification check and secure the TECWERK reducing sleeve DIN 2185 MT5→MT4 for precise taper adaptation directly from our Emmerich distribution centre. Technical data Article number: 2000832361NW Standard: DIN 2185 Brand: TECWERK Facts Total length: 171 mm Inner taper: MT4 Outer taper: MT5 Packaging unit: 1 Special features Completely hardened and ground Suitable for tools with Morse taper shank Execution: hardened and ground FAQ What taper sizes does this adapter connect? The reducing sleeve connects an MT5 outer taper to an MT4 inner taper, allowing MT4-shank tools to be used in MT5 spindles; the TECWERK adapter is manufactured to DIN 2185 tolerances. Is the sleeve suitable for heavy-duty machining? With a fully hardened and ground construction, the sleeve is designed for demanding workshop conditions and supports secure seating under typical machining loads. How long is the adapter and why does length matter? The total length is 171 mm; this provides sufficient engagement for stable clamping and helps preserve concentricity between spindle and tool. Does the sleeve require special maintenance? Regular inspection for wear and light lubrication of contact surfaces is recommended; the hardened and ground finish of the reducing sleeve extends service life and reduces maintenance frequency. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
175mm Verlängerungshülse Morsekegel gehärtet geschliffen, DIN 2187 - TECWERK
Verlängerungshülse DIN 2187 MK2xMK2 geh.u.geschl.TECWERK Verlängerungshülse DIN 2187 MK2xMK2 geh.u.geschl.TECWERK für präzise Werkzeugverlängerung bei Dreharbeiten und Bohrapplikationen in Zerspanungsbetrieben Norm DIN 2187 Genauigkeitsausführung Gehärtet und innen sowie außen geschliffen Passend für Morsekegel MK2 (Morsekegel Nr. 2) Durchmesser D 30 mm für stabile Aufnahme Gesamtlänge 175 mm für erhöhte Reichweite Präzision und Materialvorteile für stabile Ergebnisse Die Verlängerungshülse überzeugt durch ihre Genauigkeitsausführung nach DIN 2187, wodurch Rundlauf und Werkzeugposition sicher eingehalten werden. Die Hülse ist gehärtet und innen und außen geschliffen, was Verschleiß reduziert und die Lebensdauer erhöht. Die D 30 mm Aufnahme sorgt für formstabile Verbindung zwischen Maschine und Werkzeug, sodass empfindliche Bearbeitungsprozesse mit hoher Wiederholgenauigkeit ausgeführt werden können. Kompatibilität und Einsatz in der Werkstatt Diese Verlängerungshülse ist für Werkzeuge mit Morsekegel ausgelegt und nutzt sowohl Innenkegel MK2 als auch Außenkegel MK2, wodurch sie sich nahtlos in bestehende Werkzeugaufnahmen einfügt. Mit einer Gesamtlänge 175 mm und den Längenangaben L1 100 mm sowie L2 175 mm eignet sich die Hülse für verlängerte Bohrungen, schwer zugängliche Werkstücke und Vorrichtungen, in denen zusätzliche Reichweite ohne Einbußen bei der Präzision gefordert ist. Wirtschaftlichkeit, Handhabung und Sicherheit am Arbeitsplatz Der Einsatz der TECWERK Verlängerungshülse reduziert Rüstzeiten, weil standardisierte Maße und die Genauigkeitsausführung einen schnellen, wiederholbaren Werkzeugwechsel ermöglichen. Die gehärteten und geschliffenen Oberflächen verringern das Risiko von Wackeln und ungleichmäßigem Verschleiß, was Folgekosten minimiert. Anwender profitieren von einer robusten Lösung, die in Serienfertigung und Einzelteilbearbeitung gleichermaßen zuverlässige Ergebnisse liefert. Empfehlung: Für präzise Verlängerungen in der Zerspanung empfiehlt sich die Kombination der TECWERK Verlängerungshülse mit original Morsekegel-Werkzeugen; Bei technischen Fragen gern per eMail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 2000832320NW Marke: TECWERK Norm: DIN 2187 Produktart: Verlängerungshülse Innenkegel: MK2 Aussenkegel: MK2 Daten D: 30 mm L2: 175 mm L1: 100 mm Gesamtlänge: 175 mm Besonderheiten Gehärtet und geschliffen Genauigkeitsausführung Für Werkzeuge mit Morsekegel (MK2 = Morsekegel Nr. 2) Verpackungseinheit: 1 SKU: 2000832320NW FAQ Für welche Werkzeugaufnahme ist die Hülse geeignet? Die Verlängerungshülse von TECWERK ist für Werkzeugaufnahmen mit Morsekegel ausgelegt und verwendet Innenkegel MK2 sowie Außenkegel MK2, dadurch passt sie zu gängigen Dreh- und Bohrvorrichtungen. Welche Vorteile bringt die Genauigkeitsausführung nach DIN 2187? Die Genauigkeitsausführung sorgt für verbesserten Rundlauf und gleichbleibende Positionierung, was bei Serienfertigung und Präzisionsarbeiten mit der TECWERK Verlängerungshülse zu konstanteren Ergebnissen führt. Wie wirkt sich die gehärtete und geschliffene Oberfläche aus? Gehärtete und geschliffene Oberflächen vermindern Verschleiß, erhöhen die Standzeit und erhalten die Passgenauigkeit, sodass die Hülse länger präzise einsetzbar bleibt. Welche Abmessungen sind relevant für die Auswahl? Wesentliche Maße sind D 30 mm, L1 100 mm, L2 175 mm und die Gesamtlänge 175 mm; diese Angaben helfen bei der Integration in Spannsysteme und bei der Planung der Bearbeitungsreichweite. Hersteller: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
Secure, centred toolholding that keeps production running
A drill chuck is a precision toolholding device designed to grip rotating tools with cylindrical shanks, such as twist drills, countersinks or reamers, and to keep them exactly centred in the spindle axis. Available as both keyed chucks and keyless chucks, chucks are used across manual workstations and automated machining centres where consistent concentricity and repeatable clamping force are required.
How chucks work and where they make a difference
The clamping action is typically achieved by three hardened jaws that move synchronously when the chuck is closed, producing a force-fit, concentric hold on the tool shank. In shop practice a distinction is made between traditional keyed chucks, which deliver maximum holding force via a key, and modern keyless chucks, which enable fast, tool-free changes and often tighten more under increased cutting resistance. For high-speed, automated CNC work, CNC precision chucks with integrated spigot adaptors such as SK or HSK interfaces are used to maintain minimal unbalance and permit very high spindle speeds with tight runout tolerances.
Measurable benefits that improve throughput and tool life
- Reduced runout and scrap through consistent concentricity and minimal lateral displacement
- Faster set-up times when using keyless variants for rapid tool changes
- Higher holding forces with keyed chucks for heavy-duty drilling and high torque applications
- Compatibility with standard tooling (twist drills, reamers, countersinks) for versatile shop use
- Extended tool life by preventing slippage and off-axis loading that cause premature wear and breakage
Metav as the smart choice for dependable toolholding
Metav acts as a quality filter for the European market from its base in Emmerich, combining decades of expertise with a broad, dependable inventory. Backed by 48,000 customers, a range of 250,000 products and a warehouse that ensures reliable supply, Metav is presented as a pragmatic partner for procurement teams seeking consistent quality in drills, chucks and associated tooling. Other industry brands appear in the market context, but Metav’s assortment and sourcing reliability position it as a central, low-risk choice for workshop supply chains.
Technical highlights for reliable accuracy
- Clamping principle: three-jaw radial clamping
- Variants: keyed chucks; keyless chucks; CNC precision chucks with SK/HSK adaptors
- Accepted tools: twist drills, countersinks, reamers, reamers with cylindrical shank
- Performance: designed to prevent tool slippage at high torque; ensures tool runs in spindle axis
- Application: manual bench work, automated CNC centres, high-dynamic machining
Summary
A high-quality drill chuck ensures secure, concentric clamping of rotating tools and is fundamental for avoiding tool breakage, reducing scrap and maintaining dimensional accuracy across drilling operations. Choosing the right chuck type—keyed, keyless or CNC precision—directly improves productivity and tool longevity.
FAQ
What is the difference between a keyed chuck and a keyless chuck?
Keyed chucks are tightened with a key to achieve maximum holding force and are preferred for high-torque applications, whereas keyless chucks enable fast, tool-free changes and can be advantageous where rapid setup is required.
Can drill chucks be used on CNC machines with SK or HSK interfaces?
Yes. CNC precision chucks with SK or HSK adaptors are designed to be mounted on high-speed spindles, providing minimal unbalance and tight runout tolerances suitable for automated machining.
Which tool types are standard for use with a drill chuck?
Drill chucks typically accept twist drills, countersinks and reamers with cylindrical shanks; selection should match the chuck’s clamping range and the machining task.
How does a quality chuck affect tool life and process reliability?
A precision chuck keeps the tool centred in the spindle axis, prevents slippage under load and reduces off-axis forces—all factors that lower premature wear and improve the consistency of produced holes.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com