Precision drill chucks for secure, high-performance machining
Precision drill chucks reliably hold rotating tools with cylindrical shanks, such as twist drills, reamers or countersinks, ensuring centred clamping that prevents slippage and reduces premature tool wear. Designed for both traditional keyed chucks and quick-change, self-tightening variants, these drill chucks deliver fast tool changes and increasing clamping force under load, while CNC precision chucks with SK or HSK interfaces enable high speeds and minimal runout. By using hardened, synchronised jaws that provide a force-fit grip, a quality chuck maintains the tool on the spindle axis and extends tool life, improves hole accuracy and supports consistent production.
35.6mm Self-Clamping APU Collet Chuck SK30‑APU08, DIN 69871A - Vertex
Rely on the combination of self‑tightening clamping, DIN 69871A shank compatibility and a compact 0.7 kg construction for dependable toolholding in precision setups; order the SK-509 drill chuck directly via Metav Werkzeuge or consult our specialists for application advice. SK-509 SK30 APU self‑tightening drill chuck with DIN 69871A shank — Vertex The SK-509 is a drill chuck for SK30 spindles, providing a self‑tightening APU clamping system for tool diameters from Ø0.5 to 8 mm. SK30 taper with DIN 69871A shank Self‑tightening APU clamping principle Tool range Ø0.5–8 mm capacity Compact 0.7 kg design for dynamic spindles Consistent clamping for repeatable machining The self‑tightening APU mechanism secures tooling automatically as torque is applied, reducing slippage and helping to maintain constant concentricity during drilling and light machining. This mechanical principle offers reliable clamping without additional tightening tools, which reduces setup variability and contributes to stable process results. For production environments where reproducibility matters, the construction supports consistent part quality across repeat cycles. Seamless integration with SK30 spindles and industry standards Built to the DIN 69871A specification and featuring the SK30 taper, the chuck is intended for direct mounting on compatible spindles, enabling straightforward tool changes and minimal adapter requirements. The specified collet interface SK30-APU08 aligns with established tooling systems, allowing integration into existing machine fleets with little adaptation. This standardised fit supports faster machine turnarounds and lowers the risk of misalignment at installation. Precision handling of small‑diameter tooling With a usable range of Ø0.5–8 mm, the chuck is designed to hold small twist drills, reamers and similar tools with accuracy. The geometry and clamping method minimise runout, which helps to preserve hole quality and tool life when producing fine features. The capacity also allows for flexible tool selection within one holder, simplifying inventory and making the holder a practical choice for tasks that require small to medium tool diameters. Lightweight, compact form for dynamic spindle performance Weighing just 0.7 kg and measuring approximately 35.6 mm in diameter at its key interface, the chuck is compact enough to reduce inertia on the spindle while still delivering robust clamping. The low mass is advantageous for machines that demand quick acceleration and deceleration or frequent tool changes. As a Vertex product, the design emphasises dependable toolholding and straightforward maintenance, supporting efficient workshop workflows and predictable machining cycles. Choose the Vertex SK-509 for dependable SK30 clamping with DIN 69871A compatibility — contact Metav Werkzeuge for tailored application guidance and ordering support. Technical data Article number: SK-509 SKU: SK-509 GTIN: 4061905092206 Brand: Vertex Facts Diameter: 35.6 mm Weight: 0.7 kg Capacity: Ø0.5–8 mm Standard: DIN 69871A Collet type: SK30-APU08 Special features Self‑tightening APU clamping Tapered shank SK30 Compact design FAQ What tool range can be held by this chuck? The Vertex SK-509 drill chuck holds tools from Ø0.5 to 8 mm, making the SK-509 suitable for small-diameter drills and similar tooling. Is the chuck compatible with standard SK30 spindles? Yes, the chuck complies with the DIN 69871A specification and fits SK30 spindles via the SK30 taper and SK30-APU08 interface. How heavy is the SK-509 and why does that matter? The SK-509 weighs 0.7 kg; the lightweight design helps reduce spindle inertia and supports quicker acceleration and smoother dynamic performance. Does the self‑tightening APU mechanism require extra tools? No, the self‑tightening APU clamping principle secures tooling through spindle torque, avoiding additional tightening tools for routine operation. What identifiers are available for ordering or inventory? The Vertex SK-509 drill chuck is listed under SKU SK-509 and GTIN 4061905092206 for procurement and stock control. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
36mm Drill Chuck, Ø0.5-8mm, NT-30, Integrated Self-Clamping - Vertex
Ensure consistent clamping and precise machining with the combination of NT-30 taper, integrated self-tightening mechanism and compact design. Order via Metav for reliable supply or contact our advisors for technical assistance. Drill Chuck (Bohrfutter) INT-8-NT30 The Drill Chuck (Bohrfutter) with NT-30 taper provides secure, self-tightening clamping for small to medium Twist Drills in workshop and industrial applications. NT-30 taper for spindle mounting Integrated self-tightening clamping Capacity Ø0.5–8 mm for diverse drill bits Compact 36 mm diameter, lightweight 0.8 kg Reliable clamping for precise drilling Designed for repeatable performance, the Drill Chuck features an Integrated self-tightening mechanism that improves grip as torque increases, reducing slippage with small-diameter tooling. The NT-30 Taper ensures direct, rigid mounting to compatible spindles, which contributes to lower runout and consistent hole quality. This focused design supports accurate results with minimal setup. Compact form that boosts workshop efficiency A compact 36 mm Diameter and modest 0.8 kg Weight make handling and changeover faster, especially in confined setups or on portable drilling machines. Lightweight Construction reduces operator fatigue during frequent tool changes, while the small footprint allows closer stacking of fixtures and accessories. The result is improved cycle times and a tidier Workbench. Broad compatibility for common tooling Optimised for Twist Drill shanks, the chuck accepts a Capacity of Ø0.5–8 mm, covering most general-purpose and finishing drills used in metalworking and maintenance tasks. The simple clamping interface keeps tool-holding straightforward; for less experienced users, this reduces the learning curve compared with keyed systems. If spindle matching is required, choose NT-30 for direct interchangeability. Ideal choice for workshops and precision-focused applications This Bohrfutter suits small workshops, trade professionals and toolrooms that prioritise dependable clamping without unnecessary complexity. Metav’s role as a precision partner adds value: with extensive Product Range and a European Quality Filter in Emmerich, customers benefit from dependable supply and expert advice. The Drill Chuck provides the practical reliability expected in a production or repair environment. Strong recommendation: Choose the Vertex Drill Chuck with NT-30 taper for robust, repeatable clamping — contact Metav for immediate supply and tailored technical advice at info@metav-werkzeuge.com or +49 2822 7131930 (WhatsApp +49 170 2837271). Product Features Article number: INT-8-NT30 Brand: Vertex Description: Drill Chuck, integrated and self-tightening Data Diameter: 36 mm Weight: 0.8 kg Capacity: Ø0.5–8 mm Features Taper: NT-30 (tapered mount for direct spindle fitting) Clamping: Integrated self-tightening mechanism Suitable for: Twist Drill shanks FAQ What shank sizes does this chuck accept? The Drill Chuck (Bohrfutter) INT-8-NT30 from Vertex accepts shank sizes from Ø0.5 to 8 mm, making it suitable for the majority of common Twist Drills used in metalworking and maintenance. Is the NT-30 taper compatible with my machine spindle? Compatibility depends on spindle taper type; the Vertex Drill Chuck INT-8-NT30 uses an NT-30 taper, which fits spindles designed for NT-30 mounts. Check your machine specification or contact Metav for confirmation. Does the chuck require a key for tightening? The Vertex Drill Chuck INT-8-NT30 features an integrated self-tightening clamping system designed for secure holding under load; if a keyed operation is needed, verify your machine setup or ask Metav for compatible variants. How heavy is the chuck and is it suitable for portable use? The Drill Chuck INT-8-NT30 weighs 0.8 kg and has a compact 36 mm diameter, offering a balance of rigidity and portability suited to bench and portable drilling applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
36mm Integrated Self-Centreing Drill Chuck, Suit Ø0.5–8mm, BT‑30 Shank - Vertex
Take advantage of the integrated self‑centering mechanism, the broad clamping range Ø0.5–8 mm and the BT‑30 taper compatibility to improve setup speed and repeatability. Order the INT‑8‑BT30 directly via Metav Werkzeuge or consult our team for tailored advice. INT-8-BT30 – Integrated self‑centering drill chuck with BT‑30 taper, 36 mm INT-8-BT30 is an integrated, self‑centering drill chuck designed for BT‑30 toolholders and compact machining applications, offering reliable clamping of small‑diameter twist drills. Integrated self‑centering mechanism Compatible with BT‑30 taper Clamping range Ø0.5–8 mm 36 mm outer diameter Faster setups through precise self‑centring compatibility The integrated self‑centering design reduces radial runout and shortens setup times when used on BT‑30 spindles. By combining the compact 36 mm form factor with a clamping range of Ø0.5–8 mm, the chuck supports a wide variety of small‑diameter twist drills while maintaining high repeatability. This translates into fewer tool changes and a steadier production flow — particularly beneficial for high-mix, small-batch machining. Robust performance with straightforward handling Constructed to work directly on BT‑30 interfaces, the chuck delivers consistent grip force and straightforward installation. The lightweight package (1 kg) eases handling without compromising stability during operation. Because the design focuses on mechanical simplicity, maintenance requirements are minimal and wear parts are easy to identify, helping to keep total cost of ownership low while preserving precise clamping performance over many cycles. Integrates reliably into workshop logistics and quality chains The component is supplied by Vertex and distributed via Metav Werkzeuge, combining manufacturer competence with a European quality filter and dependable logistics. This makes the chuck suitable for workshops and production lines that prioritise predictable supply and traceable quality. The compatibility with standard BT‑30 tooling systems ensures seamless integration into existing equipment fleets, reducing adaptation effort and downtime. Choose Vertex BT‑30 quality for improved clamping reliability — contact Metav Werkzeuge in Emmerich for precise advice and secure supply via info@metav-werkzeuge.com Technical Data SKU: INT-8-BT30 GTIN: 4061905088469 Manufacturer: Vertex eClass: 21020490 ETIM: EC002125 Facts Diameter: 36 mm Clamping range: Ø0.5–8 mm Weight: 1 kg Taper: BT‑30 Special features Integrated self‑centering mechanism Compatible with BT‑30 spindles Suited to small‑diameter twist drills FAQ What clamping range does the INT-8-BT30 cover? The INT‑8‑BT30 covers a clamping range of Ø0.5–8 mm, suitable for a broad spectrum of small twist drills. Which spindle taper is the chuck compatible with? The INT‑8‑BT30 is designed for direct mounting on BT‑30 spindles and integrates with standard BT‑30 toolholders. How does the self‑centering function improve machining? The self‑centering mechanism in the INT‑8‑BT30 reduces radial runout and improves repeatability, resulting in more consistent hole quality and fewer rejected parts. Is the INT-8-BT30 suitable for production environments with frequent tool changes? Yes, the INT‑8‑BT30’s compact design and reliable clamping range make it well suited to production settings where quick, repeatable tool changes are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
36mm Integrated Self‑Centred Drill Chuck BT‑40, For 0.5–8mm Shank - Vertex
Taking advantage of precise clamping, broad bit compatibility and robust build, this integrated, self-tightening chuck ensures steady tool retention and simplified changeovers. Order the INT-8-BT40 directly via Metav Werkzeuge or ask our consultants if needed. INT-8-BT40 drill chuck — integrated, self-tightening for BT-40 spindles (Vertex) The INT-8-BT40 is an integrated, self-tightening drill chuck designed for BT-40 spindle machines, with a clamping range suited to small-diameter drill bits and general workshop use. Integrated self-tightening mechanism Fits BT-40 taper spindles Clamping range 0.5–8 mm Robust construction, 1.5 kg mass Consistent clamping for repeatable results The integrated self-tightening mechanism delivers reliable axial and radial grip on cutting tools, reducing slippage during machining and supporting consistent throughput on repetitive operations. Where variability in clamping can cause rework, this chuck provides steady retention for small-diameter tooling, translating technical reliability into measurable process stability. The light but solid 1.5 kg mass contributes to convenient handling without compromising rigidity. Seamless integration with BT-40 machine spindles Compatibility with the BT-40 taper ensures direct mounting on a broad range of milling and drilling machines that use this standard, avoiding adapter complexity and shortening set-up time. The compact interface reduces changeover effort and keeps the spindle-pull pattern straightforward; this eases maintenance planning and supports a leaner toolroom workflow. For workshops standardising on BT-40 systems, the chuck simplifies inventory and spindle management. Versatile clamping range for fine tooling With a clamping range of 0.5–8 mm, the chuck is suited to a variety of small-diameter drills and cutters commonly used in finishing and precision drilling. This range allows one toolholder to serve multiple operations, reducing the number of holders required and streamlining tool logistics. The capacity for fine tooling makes the device suitable for detailed work in metalworking and general workshop tasks where accuracy and adaptability are required. Built for workshop reliability and simple upkeep Constructed to withstand regular use, the chuck combines functional robustness with straightforward maintenance practices. The compact design minimises points of failure, supporting longer intervals between service while maintaining precise clamping. Clear compatibility with standard measuring practices and tooling avoids unnecessary adjustments, helping to keep machines productive and downtime predictable. Contact Metav Werkzeuge for tailored advice on the Vertex INT-8-BT40 and to arrange supply from our Emmerich quality hub — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: INT-8-BT40 GTIN: 4061905088841 eClass: 21020490 ETIM: EC002125 Facts Weight: 1.5 kg Clamping range: 0.5–8 mm Diameter: 36 mm Taper: BT-40 Special features Integrated, self-tightening chuck Compatible with BT-40 spindles Suitable for small-diameter drill bits 0.5–8 mm Manufacturer: Vertex FAQ What spindle taper does the chuck require? The chuck is designed for a BT-40 taper and mounts directly to machines that accept this standard. What is the clamping range of the chuck? The clamping range covers 0.5–8 mm, accommodating a wide selection of small-diameter drills and cutters. Is the mechanism self-tightening? Yes, the INT-8-BT40 features an integrated self-tightening mechanism for reliable tool retention. What is the product SKU and GTIN for ordering or stock checks? The SKU is INT-8-BT40 and the GTIN is 4061905088841, referenced to Vertex for procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
36mm Integrated Self‑Centred Drill Chuck NT‑40 - Vertex
Take advantage of the secure, self‑tightening clamping and the compact NT‑40 compatibility to keep machining reliable and reduce rework. Order the INT‑8‑NT40 directly via Metav Werkzeuge or consult the team for application-specific advice. INT-8-NT40 drill chuck — integrated, self‑tightening, NT‑40 taper (Vertex) The INT‑8‑NT40 drill chuck is an integrated, self‑tightening clamping unit intended for NT‑40 spindles, designed to hold shank diameters from 0.5–8 mm with a compact 36 mm body Self‑tightening clamping action Fits NT‑40 taper spindles Clamps 0.5–8 mm shank sizes Compact 36 mm body diameter Consistent clamping for improved process reliability The integrated self‑tightening mechanism converts spindle torque into an increased jaw grip, reducing the risk of bit slippage during load‑intensive operations. This behaviour translates into fewer interrupted cycles and less scrap, a clear efficiency gain for production environments. The chuck’s clamping range 0.5–8 mm supports a wide variety of common drill and tool shanks, enabling a single clamping unit to cover multiple tasks without frequent changeovers Straightforward integration with NT‑40 toolholders Designed for NT‑40 tapers, the clamping unit offers mechanical compatibility with many standard milling and drilling spindles, which simplifies installation in existing setups. The 36 mm body diameter keeps the assembly compact while the measured mass of 1.3 kg supports stable runout characteristics in ordinary workshop use. Such clear, measurable dimensions make the component easy to specify for retrofit projects and new machine builds Robust design that suits workshop routines A compact, mechanically simple design promotes long‑term reliability; the absence of complex actuators means fewer potential failure points and predictable behaviour under torque. The Vertex origin underlines industry familiarity, and the combination of a self‑tightening jaw system with a standard NT‑40 taper provides a balance between secure clamping and broad applicability. Explanation: self‑tightening chucks increase gripping force under rotational load, which is especially beneficial when machining harder materials or when index accuracy is less critical For Vertex clamping solutions such as the INT‑8‑NT40, contact Metav Werkzeuge in Emmerich for tailored advice, technical data or to place an enquiry via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: INT-8-NT40 GTIN: 4061905089510 Taper: NT‑40 Chuck diameter: 36 mm Clamping range: 0.5–8 mm Weight: 1.3 kg eCl@ss: 21020490 ETIM: EC002125 Facts Diameter: 36 mm Clamping range: 0.5–8 mm Weight: 1.3 kg Taper standard: NT‑40 GTIN numeric identifier: 4061905089510 Special features Integrated and self‑tightening design Suited for standard NT‑40 spindles Compact, workshop‑oriented construction Vertex brand origin Suitable for drill and tool shank clamping FAQ What clamping range does the chuck support? The INT‑8‑NT40 supports shank diameters from 0.5–8 mm, making it suitable for a wide variety of twist drills and small tool shanks Is the chuck compatible with standard milling spindles? Yes, the unit is designed for NT‑40 taper spindles and can be integrated into machines that accept NT‑40 toolholders How does the self‑tightening function affect performance? The self‑tightening mechanism on the Vertex INT‑8‑NT40 increases jaw grip with spindle torque, reducing slippage and improving cycle reliability during machining What are the key dimensions to consider when specifying this chuck? Important measurable values are the 36 mm body diameter and the 0.5–8 mm clamping range; the unit weight is 1.3 kg Can this chuck be used across different workshop applications? The compact design and standard NT‑40 taper make the INT‑8‑NT40 suitable for general workshop and light production use where secure, straightforward clamping is required Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
36mm Integrated Self‑Clamping Drill Chuck JC‑20 - Vertex
Take advantage of precise, maintenance‑light clamping through the combination of self‑tightening operation and a compact 36 mm body that secures drill bits from 0.5–8 mm; order the drill chuck directly via Metav Werkzeuge or consult our specialists for application advice. INT-8-JC20 Drill Chuck by Vertex — 36 mm, integrated self‑tightening The INT-8-JC20 drill chuck is an integrated, self‑tightening chuck designed for precision clamping in small to medium workshops, compatible with spindles featuring a JC-20 taper. Integrated self-tightening mechanism Clamping range 0.5–8 mm JC-20 taper for standard spindles Compact 36 mm body, 0.8 kg weight Reliable clamping for consistent drilling results A self‑tightening clamping system delivers repeatable torque transfer and reduces slippage when using twist drills and small end mills. The self‑tightening action improves concentricity under load, which leads to fewer rejected parts and less rework in production. Where repeatability matters, this compact clamping device ensures stable tool retention across a broad 0.5–8 mm range, supporting accurate holemaking without constant retightening. Straightforward integration with standard spindles The chuck mounts on a JC-20 taper, a common interface for light industrial spindles, enabling fast installation on compatible machines. With a compact diameter of 36 mm and a modest mass of 0.8 kg, the unit is suited to bench drills and smaller machining centres where space and spindle balance are critical. The taper interface simplifies retrofits and reduces setup time, thereby improving machine utilisation and workflow efficiency. Minimal upkeep and practical workshop benefits Designed for durable service life, the clamping mechanism requires only routine cleaning and lubrication; downtime for maintenance is therefore limited. The robust design of the jaw system and the integrated concept reduce the number of separate parts to handle, streamlining tool changes and inventory. For workshops aiming to increase throughput while maintaining precision, this clamping solution combines practical maintenance demands with reliable performance. Contact Metav Werkzeuge for tailored advice on integrating the Vertex INT-8-JC20 drill chuck into existing equipment — Metav Werkzeuge operates a quality hub in Emmerich and can provide technical clarification and supply details Technical data Article number: INT-8-JC20 GTIN: 4061905088650 Manufacturer: Vertex Facts Diameter: 36 mm Clamping range: 0.5–8 mm Weight: 0.8 kg Special features Integrated, self‑tightening design JC-20 taper Category: Vertex FAQ What clamping range does the chuck cover? The chuck supports a clamping range of 0.5–8 mm, suitable for standard twist drills and small tooling. Which spindle taper is required for installation? Installation requires a JC-20 taper spindle; the INT-8-JC20 is designed for this interface for straightforward mounting. Is the chuck suitable for production use in a small workshop? Yes, the integrated self‑tightening design provides repeatable clamping and is appropriate for small to medium production runs where consistent tool retention is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
36mm Integrated Self‑Clamping Drill Chuck Ø0.5–8mm SK‑40 - Vertex
The integrated, self‑tightening design together with a 0.5–8 mm clamping range and an SK40 taper delivers precise, reliable tool holding and straightforward spindle compatibility; order the Vertex INT-8-SK40 drill chuck directly via Metav Werkzeuge or ask our consultants if needed. Vertex INT-8-SK40 Integrated Self‑tightening Drill Chuck — SK40, 0.5–8 mm capacity A Vertex INT-8-SK40 is an integrated, self‑tightening drill chuck engineered for precision drilling tasks on machines with an SK40 spindle taper. Integrated self-tightening mechanism Capacity Ø 0.5–8 mm for small drills SK40 taper for standard machine spindles Robust design with 36 mm diameter Precise clamping for consistent machining results The self‑tightening chuck delivers consistent clamping through its integrated mechanism, reducing slippage under load and maintaining concentricity across the drill range. With a 0.5–8 mm capacity, the chuck suits a variety of small‑diameter twist drills and reduces changeover time compared with collet systems. The result is improved repeatability in holemaking and fewer scrapped parts, which supports higher productivity on repetitive or batch operations. Compatibility that simplifies machine integration Designed with an SK40 spindle interface, the chuck mounts directly to common machine tapers without additional adaptors, enabling fast fitting and reliable torque transmission. The compact external 36 mm profile and moderate weight of 1.4 kg keep spindle imbalance low, helping to preserve spindle bearings and extend machine service intervals. This compatibility allows shops to standardise tooling quickly and keeps set‑up procedures straightforward for operators. Robust construction for dependable workshop use The chuck's construction prioritises workshop resilience and low maintenance. A robust body and the integrated tightening action reduce the need for frequent retorquing and minimise peripheral wear. For users seeking a durable, user‑friendly solution, this chuck offers a balance of robust performance and easy handling that supports uninterrupted production cycles and predictable tool behaviour during high‑volume work. Order the Vertex INT-8-SK40 through Metav Werkzeuge for delivery from our Emmerich warehouse — contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice Technical Data Article number: INT-8-SK40 GTIN: 4061905090707 Manufacturer: Vertex ECLASS: 21020490 ETIM: EC002125 Facts Diameter: 36 mm Clamping range: Ø 0.5–8 mm Weight: 1.4 kg Special features Integrated, self‑tightening mechanism SK40 taper Suitable for small twist drills Category: Vertex FAQ What range of drill shank diameters can this chuck accept? The chuck accepts shank diameters from 0.5 mm to 8 mm, allowing the Vertex INT-8-SK40 to accommodate a wide selection of small twist drills. Is the SK40 taper compatible with standard machine spindles? Yes, the SK40 taper is a standard interface on many machine spindles, and the INT-8-SK40 mounts directly to those spindles for straightforward integration. Does the integrated self‑tightening mechanism require extra maintenance? Routine inspection is recommended, but the integrated self‑tightening design of the Vertex INT-8-SK40 reduces the need for frequent retightening and is designed for reliable, low‑maintenance operation. Can this chuck maintain concentricity for precision work? The chuck is engineered to provide precise clamping and consistent concentricity across its clamping range, supporting accurate hole placement and reduced reject rates. What is the physical size and weight of the chuck? The chuck has a 36 mm external diameter and a weight of 1.4 kg, dimensions chosen to balance stability and low rotational imbalance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
36mm Integrated Self‑Locking Drill Chuck MT‑2, Ø0.5–8mm Capacity - Vertex
A compact, self‑tightening drill chuck with an MT‑2 Morse taper and a clamping range of Ø0.5–8 mm offers secure, low‑slip tool holding and simple integration into conventional tailstocks and spindles; combine this precision clamping with the fast handling and reliable build for smoother workflows. Order the component directly via Metav Werkzeuge or consult the specialists for application advice. Drill chuck INT-8-MT2 – integrated self‑tightening, MT‑2 taper (Vertex) A drill chuck INT‑8‑MT2 designed for secure, self‑tightening clamping of twist drills and small tooling in workshop and light‑duty lathe applications. Integrated self‑tightening mechanism MT‑2 taper mount for standard tailstocks Capacity Ø0.5–8 mm for versatile use Compact 36 mm body, robust 0.8 kg weight Precise clamping that reduces slippage and tool wear The integrated self‑tightening mechanism is designed to increase clamping force as torque is applied, which improves retention of small drill bits and reduces the risk of slippage during operation. This behaviour supports consistent hole quality and lowers the chance of tool breakage, making the chuck suitable for repetitive drilling tasks where reliability matters. The compact design contributes to lower radial runout potential, supporting precision and repeatable results across series production and maintenance jobs. Easy mounting with proven Morse taper for concentricity Mounting is straightforward via the MT‑2 taper, a widely accepted standard for tailstocks and many light machines. The taper ensures secure axial alignment and helps to maintain concentricity between spindle and tool, which is critical for accurate drill guidance. The chuck’s modest mass (about 0.8 kg) and compact 36 mm body minimise added inertia and support stable rotation, leading to improved surface quality and fewer rework cycles in precision tasks. Broad clamping range for workshop flexibility With a clamping range of Ø0.5–8 mm, the unit covers most small twist drills and precision reamers used in model making, toolrooms and small‑batch production. The holding range is also compatible with standard setting tools and precision calipers for quick setup and verification of drill diameter. Built to Vertex quality standards, the chuck combines flexibility with consistent performance, helping to streamline workflow and reduce set‑up time on common machining assignments. Order the Vertex INT‑8‑MT2 drill chuck from Metav Werkzeuge for reliable, precision clamping and fast delivery from our Emmerich quality filter — contact the Metav technical team for application support and fitment guidance. Technical data Article number: INT-8-MT2 GTIN: 4061905084577 Manufacturer: Vertex Core specifications Body diameter: 36 mm Clamping range: Ø0.5–8 mm Weight: 0.8 kg Taper: MT‑2 eClass: 21020490 ETIM: EC002125 Special features Integrated self‑tightening mechanism Suitable for precision calipers Ø0.5–8 mm Compact, low‑inertia body SKU: INT-8-MT2 FAQ What drill sizes can the chuck hold? The INT‑8‑MT2 supports a clamping range of Ø0.5–8 mm, suitable for small twist drills and comparable tooling. How is the chuck mounted to a machine? Mounting is via a standard MT‑2 Morse taper, which fits tailstocks and spindles designed for this taper size. Is the chuck suitable for precision drilling tasks? Yes. The combination of the self‑tightening mechanism, compact 36 mm body and stable mounting via MT‑2 supports low runout and consistent hole quality. Does the chuck require a key to tighten? The unit features a self‑tightening design that increases clamping force under torque; this reduces reliance on external tightening during operation. Which machines are compatible with this chuck? Machines and accessories accepting an MT‑2 taper—such as many bench drills and light lathes—are compatible with the Vertex INT‑8‑MT2 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
380mm Ejector MK4-6 Semi-Automatic For DIN 228 Tool Taper, One-Hand Operation - TECWERK
Combining half‑automatic operation, a shock‑free lever release and compatibility with Morse tapers MK4–6, this extractor reduces spindle damage and speeds up tool changes. Order directly via Metav Werkzeuge for reliable supply or contact their consultants for tailored application advice. Morse Taper Extractor MK4–6 (half‑automatic) by TECWERK — one‑hand release for tool tapers Morse Taper Extractor MK4–6 (half‑automatic) is a half‑automatic extractor designed to release Morse tapers MK4–6 from spindles gently, preventing impact damage during tool changes. Half‑automatic release for MK4–6 tapers One‑hand operation with finger guard Shock‑free lever action protects spindles Fits standard DIN 228 tool tapers Faster, safer tool removal for uninterrupted production The half‑automatic lever mechanism provides a controlled, shock‑free release of the tool taper, which directly minimises the risk of spindle damage. By avoiding hammering or abrupt ejection, the device reduces downtime for repairs and preserves spindle bearings. This means fewer unscheduled maintenance stops and more predictable production flow, improving overall equipment effectiveness in the workshop. Ergonomic single‑handed operation that prioritises safety Equipped with an integrated finger guard and an ejector flap, the extractor enables swift, one‑hand operation for routine tool changes. The design reduces manual effort and enhances operator safety during repetitive tasks. In practical terms, this improves handling for both experienced machinists and workshop staff with less specialist training, while maintaining consistent removal force and protecting both tool and machine. Clear compatibility and straightforward handling for the workshop Built to the DIN 228 standard and suitable for Morse tapers MK4–6, the extractor (total length: 380 mm) fits standard tool tapers and the associated spindles. The lever actuation disengages the taper without shock, preserving the spindle seating and reducing alignment issues. Where a precise, repeatable extraction method is required, this half‑automatic solution offers a predictable and efficient alternative to manual striking or improvised tools. For expert advice on the TECWERK half‑automatic extractor and to arrange supply from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to ensure the right solution for the workshop. Technical data Article number: 4000832765NW Norm: DIN 228 Total length: 380 mm Suitable for: Morse tapers MK4–6 Packaging unit: 1 Facts Half‑automatic operation One‑hand operation with finger guard Ejector flap included Special features For tool tapers (DIN 228) Lever releases taper without impact; protects spindle Product type: half‑automatic extractor Manufacturer: TECWERK FAQ How does the extractor prevent spindle damage? The lever‑actuated, shock‑free release in the Morse Taper Extractor MK4–6 by TECWERK disengages the taper without impact, which protects the spindle seating and minimises wear on bearings. Which Morse taper sizes are supported? This extractor is designed for Morse tapers MK4–6 and conforms to DIN 228, ensuring compatibility with standard tool tapers in that size range. Is single‑hand operation possible and safe? Yes; the device features one‑hand operation with a finger guard and an ejector flap to allow safe, ergonomic removal of the tool taper. What is the total length of the extractor and is it suitable for bench use? The extractor has a total length of 380 mm, suitable for standard workshop and bench applications where MK4–6 tapers are used. What is the article number for ordering and identification? The article number is 4000832765NW, listed as the Morse Taper Extractor MK4–6 (half‑automatic) from TECWERK. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
40,2mm Schnellspannbohrfutter Supra S leichte Ausführung selbstspannend, Innengewinde, Spannbereich 1,0-13mm, Rechtslauf - RÖHM
Supra S Schnellspannbohrfutter von RÖHM Das Supra S Schnellspannbohrfutter ist ein selbstspannendes Bohrfutter für Rechtslauf, ausgelegt auf schnellen Werkzeugwechsel und präzise Bohrung mit einem Spannbereich von 1,0–13 mm. Selbstspannend für schnellen Werkzeugwechsel Spannbereich 1,0–13 mm Aufnahme 1/2” - 20 (Zoll-Gewinde) Leichte Ausführung mit Ø 40,2 mm Außendurchmesser Mit Innengewinde für sichere Montage Schneller Wechsel reduziert Stillstandzeiten und erhöht Durchsatz Die Selbstspannung des Schnellspannbohrfutters ermöglicht einen Werkzeugwechsel ohne zusätzlichen Schlüssel, wodurch Rüstzeiten deutlich reduziert werden. Durch die kompakte, leichte Ausführung bleibt die Belastung der Spindel gering, was die Standzeit von Maschinensystemen erhöht. Anwender profitieren von schneller Verfügbarkeit der Maschine und konstanter Bearbeitungsqualität bei Serien- und Einzelteilen. Kompatibilität und Präzision für vielfältige Anwendungen Dank der Aufnahme 1/2” - 20 ist das Bohrfutter mit vielen Standardspindeln kompatibel; der Spannbereich 1,0–13 mm deckt gängige Werkzeugdurchmesser zuverlässig ab. Die definierte Drehrichtung für Rechtslauf sorgt für sicheren Halt beim Eintauchen in unterschiedlichste Werkstoffe. So bleibt die Bohrbildpräzision erhalten und Nacharbeit wird minimiert. Geeignetes Einsatzfeld und Zielgruppe Das Schnellspannbohrfutter richtet sich an Werkstätten, Instandhaltung und Serienfertigung, die effiziente Rüstprozesse und hohe Wiederholgenauigkeit benötigen. Durch die robuste Auslegung eignet sich das Produkt für Kunden, die eine verlässliche Verbindung zwischen Spindel und Werkzeug fordern, etwa im Metallbau, Maschinenbau oder bei Reparaturarbeiten. Montage, Wartung und langlebige Nutzung Das Vorhandensein eines Innengewindes vereinfacht die Montage und erlaubt eine sichere Befestigung am Spindelkonus. Regelmäßige Reinigung und leichte Schmierung der Spannbacken erhöhen die Lebensdauer des Bohrfutters und sichern konstante Spannkräfte. Durch die geringe Bauform mit 40,2 mm Außendurchmesser bleibt die Zugänglichkeit an engen Werkstücken erhalten. Für professionelle Anwendungen empfiehlt sich das Supra S Schnellspannbohrfutter von RÖHM zur Optimierung von Rüstzeiten und zur Sicherstellung gleichbleibender Bohrergebnisse; Beratung und Lieferung erfolgen direkt über Metav Werkzeuge GmbH, eMail info@metav-werkzeuge.com, Tel +49 2822 7131930 Produktmerkmale Artikelnummer: 4000832216NW Marke: RÖHM Ausführung: Supra S Produktart: Schnellspannbohrfutter Aufnahme: 1/2” - 20 Daten Spannbereich: 1,0-13 mm Außendurchmesser: 40,2 mm Verpackungseinheit: 1 Besonderheiten selbstspannend leichte Ausführung Innengewinde Drehrichtung: Rechtslauf Aufnahme: 1/2” - 20 (Zoll-Gewinde) FAQ Wie groß ist der Spannbereich dieses Bohrfutters? Der Spannbereich des Supra S Schnellspannbohrfutters liegt bei 1,0–13 mm und eignet sich damit für viele Standardbohrer in Werkstatt und Produktion. Ist das Bohrfutter für Rechts- und Linkslauf geeignet? Das Supra S von RÖHM ist für Rechtslauf ausgelegt; die Drehrichtung gewährleistet sichere Spannkräfte bei konventioneller Spindelrichtung. Welche Aufnahme hat das Bohrfutter? Das Bohrfutter verfügt über eine Aufnahme 1/2” - 20, ein gängiges Zoll-Gewinde für die Befestigung an Standardspindeln. Eignet sich das Bohrfutter für den Dauereinsatz in der Serienfertigung? Ja, die leichte Ausführung kombiniert mit der Selbstspannung macht das Supra S Schnellspannbohrfutter robust und effizient für häufige Werkzeugwechsel in der Serienfertigung. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.2mm Heavy Duty Self‑Clamping Keyless Drill Chuck 0–10mm B12 Right‑Hand - TECWERK
Take advantage of the heavy-duty industrial design, the self-clamping action and the compact B12 taper interface for steady performance in stationary drills; these features combine to reduce interruptions and secure consistent hole quality. Order the TECWERK quick-action drill chuck directly via Metav Werkzeuge or ask our consultants if needed. TECWERK quick-action keyless drill chuck – 0–10 mm, B12 taper, right-hand rotation The TECWERK quick-action keyless drill chuck is a robust, self-clamping chuck designed for stationary machines and right-hand rotation applications, offering a compact B12 taper mount and a versatile 0–10 mm clamping range. Heavy-duty industrial design Self-clamping mechanism Clamping range 0–10 mm B12 taper mount for stationary spindles For right-hand rotation, Ø 40.2 mm Reliable performance for continuous production The chuck's construction focuses on operational reliability: a heavy-duty industrial design paired with a self-clamping mechanism keeps drills securely held under cutting loads, reducing the frequency of retightening and unplanned stops. In practice, this stability translates into steadier cycle times and improved hole repeatability on production lines and in demanding workshop environments. The combination of robust components and straightforward functionality supports longer run times between inspections and fewer process deviations, which is particularly valuable for small-batch and continuous machining alike. Compact interface and wide bit compatibility A 0–10 mm clamping range covers the most commonly used twist drill sizes without the need for multiple adapters, simplifying tool selection and changeover. The B12 taper refers to the taper-style spindle interface that allows direct mounting to compatible spindles, ensuring a secure mechanical fit while keeping the overall assembly compact. With an outside diameter of Ø 40.2 mm, the chuck is suitable where space is limited around the spindle nose. Engineered for right-hand rotation, the internal jaw geometry and gripping action are optimised for conventional forward drilling, promoting reliable bit retention and consistent cutting forces. Low-maintenance design that protects uptime The chuck's straightforward mechanical design minimises wear points and permits routine inspection and lubrication without specialised tools, supporting reduced downtime and predictable maintenance intervals. Quick-action operation speeds up bit changes on both bench and production machines, aiding throughput without sacrificing clamping force. For workshops seeking to integrate or replace spindle-mounted chucks, the compact taper mount and proven mechanical concept simplify compatibility checks and spare-part planning, helping to protect production schedules and maintain process quality. For tailored advice on integrating the TECWERK quick-action keyless drill chuck into existing equipment, contact Metav Werkzeuge in Emmerich for expert consultation and order processing: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 2000832052NW Type: Quick-action keyless drill chuck Brand: TECWERK Mount: B12 taper Clamping range: 0–10 mm Rotation: right-hand Outside diameter: 40.2 mm Version: heavy-duty industrial execution Packaging unit: 1 Facts Clamping range 0–10 mm Outside diameter 40.2 mm Packaging unit 1 Special features Self-clamping mechanism Heavy-duty industrial execution for stationary machines With taper mount Designed for right-hand rotation FAQ What machines is this chuck suitable for? The TECWERK quick-action keyless drill chuck is intended primarily for stationary machines with a compatible B12 taper spindle and is optimised for right-hand rotation setups. What clamping sizes are supported? Clamping is specified as 0–10 mm, covering standard twist drill sizes commonly used in workshop and production environments. How does the B12 taper affect installation? A B12 taper provides a compact taper interface for direct fitting to matching spindles; proper seating and checking for compatibility with the machine spindle are recommended before commissioning. Is the chuck self-tightening under load? Yes, the chuck features a self-clamping mechanism that increases gripping force under forward drilling load, helping to maintain bit retention during operation. What maintenance is required? Routine inspection, light lubrication and checks for jaw wear are recommended to sustain performance; the design allows these tasks to be completed without specialised tools. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40.2mm Heavy Duty Supra Keyless Drill Chuck 0-10mm B16 Right-Hand - RÖHM
Combining heavy-duty construction, a self-tightening clamping system and a secure B16 taper, this chuck ensures reliable, repeatable performance in stationary drilling applications; order directly via Metav Werkzeuge or ask the consultants for tailored advice. Supra quick-change drill chuck — self-tightening heavy-duty chuck, 0–10 mm clamping range, B16 taper (RÖHM) The Supra quick-change drill chuck is a self-tightening, heavy-duty quick-change chuck with a B16 taper, designed for stationary machines running in right-hand rotation. Self-tightening mechanism for secure grip 0–10 mm clamping range for standard drill bits B16 taper for rigid, concentric mounting Heavy-duty design for stationary machines Secure clamping for consistent drilling results The self-tightening mechanism provides a consistently firm hold on cutting tools, reducing slippage and improving concentricity in drilled holes. With a 0–10 mm clamping range, the chuck accommodates most common twist drills and small tools, keeping changeover times short and tool run-out low. The combination of reliable hold and compact construction contributes directly to reduced rework and steadier production rates when machining routine holes. Built for demanding stationary machining Designed as a heavy-duty industrial variant, this chuck suits stationary equipment in workshops and production lines where robustness matters. The B16 taper ensures rigid seating in compatible spindles, while the specified right-hand rotation matches standard drilling directions. The modest outer diameter (40.2 mm) and solid build make the unit easy to integrate without excessive overhang, helping to maintain alignment and minimise vibration during operation. Practical integration, simple maintenance Compatibility with B16 taper spindles and the self-tightening design mean straightforward installation and minimal additional fixturing. The mechanism is serviceable and does not rely on external keying for normal operation, simplifying routine checks and lowering housekeeping time. Where precise terminology helps clarify selection: a B16 taper refers to the machine-side mount standard, and the chuck’s self-tightening action tightens under normal drilling torque, improving security under load. For secure, repeatable drilling performance with a proven RÖHM design, contact Metav Werkzeuge to check spindle fitment and order the Supra quick-change drill chuck (SKU 4000832044NW) for your machine bay; Metav Werkzeuge can advise on compatibility and delivery from Emmerich. Technical data Article number: 4000832044NW SKU: 4000832044NW Product type: Quick-change drill chuck Model: Supra Mounting: B16 Clamping range: 0–10 mm Rotation: right-hand Outer diameter: 40.2 mm Packaging unit: 1 Facts Clamping range: 0–10 mm Outer diameter: 40.2 mm Mounting standard: B16 Packaging unit: 1 Special features Self-tightening mechanism Heavy-duty industrial version for stationary machines Taper mounting (B16) Designed for right-hand rotation FAQ What is the clamping range of this chuck? The RÖHM Supra quick-change drill chuck has a clamping range of 0–10 mm, suitable for most small to medium twist drills. Which machine taper is required for mounting? Mounting requires a B16 taper spindle; the chuck seats directly into a B16 machine taper for rigid support. Is the chuck suitable for high-torque or continuous production use? The heavy-duty construction and self-tightening mechanism make this chuck appropriate for demanding stationary drilling tasks and continuous production environments. How does the self-tightening feature work in practice? Under normal drilling torque the self-tightening mechanism increases grip on the tool shank, reducing the risk of slippage and improving repeatability for the RÖHM Supra quick-change drill chuck. Can this chuck be used on left-hand rotating spindles? This particular version is specified for right-hand rotation; for left-hand applications, an alternative model should be selected. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.2mm Supra S Quick-Change Drill Chuck 1.0-13mm, Self-Clamping, 3/8”–24 Thread, Right-Hand - RÖHM
Take advantage of the self-tightening, lightweight design and the 1.0–13 mm clamping range for faster tool changes and reduced downtime; enquire about availability and delivery from Metav Werkzeuge for straightforward procurement. RÖHM Supra S keyless drill chuck — self-tightening, 1.0–13 mm The RÖHM Supra S keyless chuck designed for assembly on spindles with a 3/8"-24 mounting thread, optimised for right-hand rotation in light-duty applications Self-tightening lightweight design Clamping range 1.0–13 mm Internal 3/8"-24 mounting thread For right-hand rotation (reliable run) Faster changeovers and steady clamping for daily workshop use The quick-change chuck offers a self-tightening mechanism that reduces the time spent re-clamping and helps maintain concentricity during drilling operations. With a 1.0–13 mm clamping range, the device covers the most common drill sizes used in general metalworking and maintenance tasks, meaning fewer tool swaps and smoother workflows. The lightweight construction contributes to lower spindle load and quicker manual handling without compromising the gripping action, which supports higher process efficiency in repetitive assembly or repair work. Robust mounting and clear mechanical compatibility The chuck mounts on a 3/8"-24 internal thread, making it compatible with a wide range of hand-held and benchtop drills that accept this standard spindle interface. Its designated right-hand rotation ensures full compatibility with conventional drilling directions and prevents unintended loosening under normal use. The compact outer diameter of 40.2 mm allows access in tighter fixtures and keeps the tool profile neat when working in confined spaces. These measurable specifications enable reliable planning for integration into existing toolsets. Practical benefits that reduce operational risk By combining a lightweight form with self-tightening clamping, the chuck minimises operator fatigue during repetitive changes and improves safety by maintaining a secure grip on the tool shank. The simple internal-thread attachment simplifies fitting procedures and reduces assembly time compared with more complex mounting systems. For workshops looking to standardise on robust, easy-to-use clamping elements, this quick-change unit offers repeatable performance and straightforward maintenance, supporting uninterrupted production cycles and dependable daily operation. Contact Metav Werkzeuge for availability and tailored advice on integrating the RÖHM Supra S keyless drill chuck into existing equipment; Metav’s specialists will provide shipment and compatibility details from their Emmerich centre Technical data Article number (SKU): 4000832215NW Type: Supra S Product: Keyless drill chuck Manufacturer: RÖHM Facts Clamping range: 1.0–13 mm Mounting thread: 3/8"-24 Outer diameter: 40.2 mm Packaging unit: 1 Special features Self-tightening Lightweight design Internal thread mounting For right-hand rotation (Rechtslauf) FAQ What clamping sizes does this chuck accept? The chuck accepts drill shanks from 1.0 mm up to 13 mm, providing a versatile clamping range suitable for general metalworking and maintenance tasks. Which spindle interface is required for fitting this chuck? Fitting requires a 3/8"-24 internal thread on the spindle; this is the specified mounting interface for the RÖHM Supra S keyless chuck. Is the chuck suitable for left-hand rotation machines? This model is specified for right-hand rotation; for left-hand applications, a different version or adapter should be considered. How does the self-tightening feature benefit daily use? The self-tightening action reduces the need for frequent re-tightening, improves concentricity under cutting forces and shortens tool-change times during repetitive operations. Can the chuck be used on hand-held drills as well as benchtop machines? Yes; the 3/8"-24 mounting and compact design make it suitable for compatible handheld and benchtop spindles that accept this thread standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Quick-Change Drill Chuck Supra SK 0.5–10mm Self‑Closing, Reversible Rotation - RÖHM
Take advantage of the combination of self-tightening clamping, a 0.5–10 mm clamping range and a compact B 12 mounting for secure, efficient drilling in demanding workshop environments; order the Supra SK directly via Metav Werkzeuge or consult the Metav specialists for application advice. Supra SK – Keyless drill chuck with B 12 mounting and 0.5–10 mm clamping range (RÖHM) The Supra SK is a self-tightening, keyless drill chuck designed for rapid tool changes and reliable operation in both right- and left-hand rotation. Self-tightening, rapid tool change Wide clamping range 0.5–10 mm B 12 taper for direct mounting Safety lock for hammer drills Secure grip under vibration for uninterrupted production The self-tightening mechanism ensures a consistently high gripping force even when exposed to reversing torques, reducing the risk of bit slippage during heavy-duty or interrupted drilling cycles. Fitted with a safety lock specifically designed for use with hammer drills, this chuck copes with machines that have a high natural frequency by preventing unintended loosening. The result is fewer re‑clamps, less downtime and improved process reliability in repetitive workflows. Rapid tool changes and wide compatibility save cycle time With a clamping range of 0.5–10 mm and a tool-free release, this quick-release chuck enables fast swapping of twist drills and small machining tools, accelerating set-up and changeover. The B 12 mounting allows direct attachment to compatible spindles, while support for right and left rotation offers flexibility for a variety of machining tasks and special applications. These characteristics contribute to a measurable improvement in throughput where short, frequent tool changes are required. Compact design built for workshop endurance A modest 40 mm outer diameter combines low bulk with robust performance, making the chuck suitable for confined spindles and multi-tool heads where space is limited. The compact construction minimises mass on the spindle without compromising clamping reliability, supporting smoother running and reduced wear. Regular inspection and simple cleaning will maintain function; the design is intended for straightforward maintenance cycles common in production and trade workshops. For process-critical drilling tasks choose the Supra SK for dependable, fast clamping — contact Metav Werkzeuge's specialists at their Emmerich hub for tailored recommendations or to arrange supply via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: 4000832131NW Type: Supra SK Product type: Keyless drill chuck Shank / mounting: B 12 Clamping range: 0.5–10 mm Rotation: Right and left rotation Outer diameter: 40 mm Packaging unit: 1 Brand: RÖHM Facts Clamping range 0.5–10 mm Outer diameter 40 mm Packaging unit 1 Special features Self-tightening mechanism for secure clamping Quick clamping and release for rapid tool changes Safety lock for hammer drills with high natural frequency Suitable for right- and left-hand rotation FAQ What clamping range does this chuck cover? The Supra SK quick-release drill chuck (RÖHM, SKU 4000832131NW) covers a 0.5–10 mm clamping range, making it suitable for small twist drills and similar tooling. Is the chuck suitable for hammer drills? Yes. The chuck includes a safety lock designed for use with hammer drills and machines that exhibit a high natural frequency, reducing the chance of unintended loosening. Which spindle mounting is required? The unit uses a B 12 mounting interface; compatibility requires a corresponding B 12 receptacle on the machine spindle. Can it be used in both rotational directions? The chuck is specified for right and left rotation, so it supports applications requiring reversible spindle direction. How should the chuck be maintained for longest life? Routine cleaning of the jaws and light lubrication of moving parts will keep the chuck functioning reliably; the Supra SK’s compact design facilitates straightforward inspection and maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.4mm Self‑Centred Drill Chuck J2S Taper, Heavy‑Duty 28kg, Type 10XHSP - Vertex
Take advantage of the combination of robust J2S taper mounting, self-tightening clamping action and compact dimensions for reliable toolholding in demanding machining set-ups. Order the component directly via Metav Werkzeuge or request tailored advice from our consultants. Self-tightening drill chuck 10XHSP – J2S taper, Ø 42.4 mm (Vertex) the self-tightening drill chuck 10XHSP offers secure clamping for drill and reaming operations in workshop and production environments Self-tightening clamping action for secure hold J2S taper mounting for stable spindle connection Ø 42.4 mm nominal diameter for compact installation Robust construction; weight 28 kg for mass-damped stability Reliable clamping for consistent production results The self-tightening mechanism converts spindle torque into radial clamping force, creating a reliably secure grip on round-shank tools without additional tightening devices. This behaviour reduces slip under load and ensures repeatable positioning, which is particularly valuable in serial drilling or reaming tasks where precision and process stability matter. The chuck's design supports controlled tool retention while keeping setup simple, making it suitable for both workshop fixtures and machine-tool use. Stable interface with the machine spindle A J2S taper provides a compact, mechanically positive connection to the spindle. The taper interface is engineered for axial and radial stiffness, translating into reduced vibration and improved concentricity during cutting operations. With a nominal Ø 42.4 mm footprint and significant mass (approx. 28 kg), the assembly benefits from inherent damping that helps maintain steady cutting conditions and improves surface finish. These attributes support consistent hole quality and reduce the need for rework. Practical workshop integration and maintenance The component's straightforward mounting concept and robust build simplify installation and long-term maintenance. The compact dimensions allow integration in confined spindle noses while the mass helps attenuate chatter in interrupted cuts. Routine inspection focuses on the taper seating and the clamping surfaces; preserved cleanliness and correct seating ensure sustained performance. For users seeking dependable toolholding without complex attachment systems, this clamping device represents a pragmatic and efficient solution. Contact Metav Werkzeuge in Emmerich for expert advice on integrating the Vertex 10XHSP into existing machinery and for ordering details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 11019 GTIN: 4061905087011 Type: 10XHSP Brand: Vertex Core specifications Diameter: 42.4 mm Weight: 28 kg ECLASS: 21020490 ETIM: EC002125 Features Self-tightening clamping action Taper: J2S Suitable for machine-tool mounting FAQ What tool shank types can be held by this chuck? The self-tightening drill chuck 10XHSP is designed for cylindrical tool shanks and secures round shank drills and reamers through its clamping jaws. Which taper is used for spindle mounting? Mounting is via a J2S taper; the Vertex 10XHSP uses this taper to ensure a rigid and repeatable spindle connection. How does the chuck improve drilling stability? Mass and taper stiffness of the unit reduce vibration and enhance concentricity, so the 10XHSP provides improved stability and consistent hole quality. Is this chuck suitable for heavy-duty production environments? Yes, the robust construction and self-tightening clamping make the component appropriate for continuous machining operations where reliable tool retention is required. What identifiers should be used when ordering spare parts or replacements? Refer to SKU 11019 and GTIN 4061905087011 when requesting parts or replacements for the Vertex 10XHSP Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42.4mm Self‑Closing Drill Chuck B12 Taper, 10XHSP Series - Vertex
Combining a self-centring mechanism with a precise Ø 42.4 mm clamping capacity and a compact B12 taper, this chuck delivers stable, repeatable clamping for production and workshop tasks. Order the drill chuck directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Vertex 10XHSP drill chuck — self-centring, B12 taper, Ø 42.4 mm The Vertex 10XHSP drill chuck is a self-centring workholding device engineered for accurate drilling and toolholding on machines with a B12 taper interface Self-centring clamping mechanism Ø 42.4 mm maximum clamping diameter B12 taper mounting for compact spindles Secure clamping for consistent machining results The self-centring design ensures that the jaws close symmetrically around the tool shank, producing high concentricity and minimising run-out during drilling and reaming operations. This stability translates into repeatable hole quality, less tool wear and fewer rejected parts, supporting efficient batch production. The Ø 42.4 mm specification indicates the maximum clamping capacity, which covers a wide range of common drill shank sizes while keeping the setup compact. For users new to workholding, self-centring means faster changeovers because manual alignment is largely eliminated, so setup time is reduced without sacrificing accuracy. Compact taper for reliable machine integration A B12 taper provides a compact and rigid spindle interface that is widely used on small to medium machine spindles. The small form factor offers a secure mechanical connection while preserving spindle clearance and accessibility for tooling. Because the taper is a standardised interface, compatibility with machines that accept B12 tapers is straightforward; the compact mounting also helps maintain spindle balance and minimises vibration during high-precision operations. The combination of a robust taper and the chuck's clamping mechanism supports stable machining even at elevated speeds typical for metalworking tasks. Workshop advantages and operational efficiency Built for routine workshop use, this chuck delivers a balance of durability and serviceability. The construction emphasises robust contact surfaces and a design that allows rapid jaw movement, which reduces cycle times during repeated tool changes. As a result, maintenance intervals are straightforward to plan and the risk of unexpected downtime is lowered, contributing to overall productivity. When tool life and process reliability matter, the mechanical simplicity of the chuck provides an economical, low-fuss solution that complements more complex tooling systems. Proven origin and supply assurance Manufactured by Vertex, the item benefits from the brand's experience in toolholding components and machining accessories. Supplying through Metav Werkzeuge adds an additional layer of quality assurance: Metav acts as a quality filter for the European market and offers a comprehensive product range and logistics from Emmerich. For buyers who value traceability and dependable sourcing, choosing components from established manufacturers and trusted distributors reduces procurement risk and supports long-term workshop planning. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex 10XHSP drill chuck into existing spindle systems and for supply options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 11020 GTIN: 4061905095559 Manufacturer: Vertex Type: 10XHSP Facts Diameter: 42.4 mm Weight: 28 kg ECLASS: 21020490 ETIM: EC002125 Taper: B12 Special features Self-centring design Drill chuck Compact B12 taper mounting FAQ What is the maximum clamping diameter of the chuck? The maximum clamping diameter is 42.4 mm; the Vertex 10XHSP drill chuck supports common round shank sizes up to this value. Does the chuck require manual centring? No, the chuck features a self-centring mechanism that aligns the jaws automatically to provide consistent concentricity. Which taper interface is required for mounting? The unit mounts to a B12 taper spindle interface; compatibility depends on the machine accepting this taper size. Is the Vertex 10XHSP suitable for high-speed drilling? The chuck's compact taper and balanced clamping are suitable for typical workshop speeds; check machine speed limits and tooling recommendations for specific high-speed applications. What is the article number for ordering and reference? The article number (SKU) is 11020 for ordering and stock reference Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42.4mm Self‑Closing Drill Chuck B16 Taper, 10XHSP Series - Vertex
The self-tightening design combined with a standard B16 taper and a compact 42.4 mm body ensures secure clamping and consistent machining results; ideal where repeatable tool retention and short setup times matter. Order the part directly via Metav Werkzeuge or contact our consultants for tailored advice. Drill chuck 10XHSP – self-tightening chuck with B16 taper The Drill chuck 10XHSP is a self-tightening drill chuck designed for machining applications that require reliable bit retention and compatibility with B16 taper spindles. Self-tightening chuck for secure grip B16 taper mounting for standard spindles Compact 42.4 mm body diameter Robust construction for industrial use Consistent grip for efficient machining The self-tightening clamping principle increases grip as torque rises, which reduces slippage and the need for repeated tightening during production. This behaviour delivers a direct operational benefit: fewer interrupted cycles and less scrap from slipped tools. For workshops and small production runs, the result is a measurable rise in throughput and a reduction in manual intervention, helping to keep machining sequences uninterrupted and predictable. Simple integration with B16 spindles Fitting is straightforward thanks to the B16 taper mounting, a common standard on compact spindles and drilling heads. The compact 42.4 mm body diameter aids accessibility in confined setups and permits close tool spacing on multi-spindle heads. Compatibility with standard interfaces reduces set-up time, while the clear mechanical interface minimises the need for adapters, helping to streamline equipment configuration and shorten changeover windows. Built for industrial reliability The chuck is specified as type 10XHSP and comes from Vertex, reflecting a focus on workshop-grade robustness. The construction supports continuous use in production environments and is specified with a weight of 28 kg, indicating substantial build quality suitable for heavy-duty fixtures. The solid mechanical design reduces the frequency of maintenance interventions and supports a stable clamping force over long service intervals, contributing to predictable tool life and lower indirect costs. Practical advantages for everyday use Beyond the core clamping function, the design of this chuck emphasises consistency and ease of use. The profile and locking behaviour make it easier to maintain concentricity under cutting load, which improves hole quality and repeatability. For operations that prioritise reliable holemaking and reduced rework, this solution provides a straightforward technical improvement without requiring changes to established machine tool interfaces. Order the Vertex drill chuck type 10XHSP via Metav Werkzeuge for dependable clamping performance; Metav Werkzeuge in Emmerich offers expert advice and supply reliability to integrate this chuck into existing setups Technical data Article number: 11021 GTIN: 4061905095566 Type: 10XHSP Brand: Vertex Facts Diameter: 42.4 mm Weight: 28 kg eClass: 21020490 ETIM: EC002125 Special features Self-tightening clamping mechanism B16 taper mounting Industrial-grade construction SKU: 11021 FAQ What mounting interface does this drill chuck use? The drill chuck 10XHSP is supplied with a B16 taper interface, making it compatible with spindles and drilling heads that accept B16 mounting. Is the 10XHSP suitable for high-torque drilling applications? The self-tightening design of the 10XHSP by Vertex improves grip under increasing torque, reducing slippage and making it suitable for higher-torque operational profiles where secure retention is required. What are the key dimensions to consider for installation? Key dimensions for the 10XHSP include a body diameter of 42.4 mm and the B16 taper; refer to these values when planning spindle compatibility and clearance. How does this chuck affect tool changeover times? The standard B16 mounting and the compact body profile of the 10XHSP reduce the need for adapters and allow closer tool spacing, which helps to shorten changeover and setup times. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42.4mm Self‑Tightening Drill Chuck J33 Taper, 10XHSP Series - Vertex
Benefit from the combination of self-tightening operation, a 42.4 mm nominal diameter and a secure J33 taper for consistently reliable clamping and reduced setup time. Order the drill chuck directly via Metav Werkzeuge or ask our consultants if needed. Self‑tightening drill chuck '10XHSP' with 42.4 mm capacity and J33 taper — Vertex A self‑tightening drill chuck '10XHSP' engineered for industrial clamping tasks, offering robust holding force and stable machine mounting for demanding production environments Self‑tightening keyless operation 42.4 mm nominal diameter J33 taper for stable mounting Heavy‑duty 28 kg construction Consistent clamping for uninterrupted production The self‑tightening design delivers reliable grip on tools without additional tightening keys, reducing setup steps and increasing throughput. Built to industrial standards, the chuck minimises runout and vibration, which directly benefits hole quality and tool life. The combination of a 42.4 mm capacity and the chuck’s heavy construction ensures that cutting forces are absorbed effectively, supporting repeatable results in serial drilling and heavy‑duty operations. Secure mounting with J33 taper explained The J33 taper provides a robust interface between spindle and chuck, ensuring axial and radial stability under load. In practice, this means fewer micro‑movements during machining and a lower risk of concentricity loss. A taper coupling like this is chosen where machine rigidity and repeatable positioning are priorities; it facilitates quick mounting while maintaining a secure fit for high‑torque tasks. The chuck’s specification supports stable transfer of forces from the tool to the machine frame. Designed for heavy industrial use and reduced downtime Constructed for longevity, the assembly’s substantial mass (approx. 28 kg) contributes to damping and steady performance during extended cycles. The design supports operations where frequent tool changes and sustained clamping forces occur, helping to reduce maintenance intervals. Where precision and uptime matter, the chuck’s attributes translate into measurable efficiency gains and fewer interruptions for re‑alignment or corrective machining. Technical compatibility and procurement confidence Supplied under the Vertex brand and identified as type 10XHSP, the chuck is suited to workshops and production lines requiring dependable clamping solutions. Metav’s role as a quality filter for the European market means procurement is backed by experience and an extensive range of precision products. For additional technical parameters or application advice, Metav’s specialists can provide targeted information and guidance to match machine interfaces and process requirements. Contact Metav Werkzeuge today to discuss how the Vertex 10XHSP chuck fits specific machine setups and production needs or request detailed technical drawings and compatibility checks Technical data Article number: 11018 GTIN: 4061905086250 Type: 10XHSP Name: Self‑tightening drill chuck Brand: Vertex Facts Diameter: 42.4 mm Weight: 28 kg Taper: J33 eClass: 21020490 ETIM: EC002125 Special features Self‑tightening keyless operation Heavy‑duty construction Industrial clamping application SKU: 11018 FAQ What machines is the chuck compatible with? The Vertex 10XHSP drill chuck mounts on spindles equipped with a J33 taper and is intended for machines where a robust, repeatable clamping interface is required. How does the self‑tightening mechanism improve workflow? Self‑tightening operation on the 10XHSP reduces the need for separate tightening tools, shortening setup times and improving cycle efficiency in serial drilling tasks. Is the chuck suitable for high‑torque drilling? The chuck’s heavy‑duty construction and secure J33 taper provide the stability required for higher torque applications in industrial environments. Can the chuck be used for precision drilling operations? Yes. The Vertex 10XHSP is designed to minimise runout and vibration, supporting consistent hole quality and extended tool life for precision work. What identifiers should be quoted when ordering? Please reference the Vertex 10XHSP, SKU 11018 and GTIN 4061905086250 when enquiring or placing an order. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
42.5mm Quick-Change Drill Chuck 1–10mm, 1/4" Hex Shank, Radial Locking, Hammer-Resistant - RÖHM
Take advantage of the combination of fast bit changes, radial locking for impact resistance and a compact 1–10 mm clamping range to keep assembly and maintenance tasks efficient and reliable; order directly via Metav Werkzeuge or consult their technical advisers for compatibility and delivery. EXTRA80-RV quick-change drill chuck – 1/4” hex shank, 1–10 mm capacity (RÖHM) The EXTRA80-RV is a radial-lock quick-change drill chuck designed for use with impact wrenches and cordless drills, offering secure clamping from 1 to 10 mm for fast tool exchanges 1/4" hex shank for quick tool changes 1–10 mm clamping range Radial locking for impact resistance Carbide jaw facets for secure grip Faster bit changes and uninterrupted workflow Engineered for quick tool swaps, the chuck’s 1/4” hex shank and quick-change design reduce downtime on repetitive fastening and drilling tasks. The compact clamping span of 1–10 mm covers the common range of drill and driver bits used in assembly lines and maintenance benches, meaning fewer tool changes and more continuous operation. The straightforward interface with standard hex-bit holders delivers predictable cycle times and less handling during production runs. Built to take impact tools and reversible operation With a radial locking mechanism and construction rated as radial-impact-proof, this chuck is suitable for heavy-duty applications with impact wrenches and cordless drills. The design supports both right- and left-hand rotation, maintaining grip during reverse operation and rapid direction changes. These attributes translate into reliable performance under fluctuating torque loads and reduce the risk of bit ejection during high-torque tasks. Secure hold and consistent machining results The chuck’s jaw facets are made from carbide, providing a secure grip and improved wear resistance compared with standard steel jaws. That durability helps maintain clamping concentricity over time, which is essential for repeatable hole quality and reduced rework. For operators unfamiliar with technical terms: carbide is a very hard material used for cutting and clamping surfaces to keep their shape and grip under repeated stress. Practical design for demanding workshop environments A plastic housing contributes to weight reduction while the overall build remains impact and percussion-resistant, making the chuck convenient for mobile cordless use without sacrificing robustness. The compact outer diameter and hex shank format make it compatible with standard quick-change adapters and bit holders, simplifying integration into existing tool fleets. The result is a toolholder that balances ease of handling with the durability required in workshops and on-site installations. Choose RÖHM’s EXTRA80-RV for robust, fast-change performance and contact Metav Werkzeuge for tailored advice or to arrange supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 8002875400NW Type: EXTRA80-RV Product: Quick-change drill chuck Brand: RÖHM Core specifications Clamping range: 1–10 mm Shank: 1/4" hex Outer diameter: 42.5 mm Packaging unit: 1 UID: 8002875400NW Special features Radial locking mechanism Suitable for impact wrenches and cordless drills Radial-impact-proof / impact-drill-proof Plastic housing Carbide jaw facets for wear resistance Reversible rotation: right and left FAQ Is this chuck compatible with impact drivers? The EXTRA80-RV quick-change drill chuck (RÖHM, SKU 8002875400NW) is designed for use with impact wrenches and cordless drills and is specified as radial-impact-proof. What clamping range does the chuck cover? The chuck accepts shank diameters from 1 to 10 mm, which accommodates most common drill bits and driver bits. How is the chuck secured to the drill? The tool attaches via a 1/4" hex shank for quick and secure connection to standard hex chucks and quick-change adaptors. Are the jaws resistant to wear? Yes, the jaw facets are made from carbide, offering enhanced wear resistance and a consistent grip over repeated use. Can the chuck be used for left-hand rotation? The design supports both right- and left-hand rotation, making it suitable for reversible applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.7mm 1-10mm Quick-Change Drill Chuck 3/8”-24 Radial Lock, Through-Hole, Reversible - RÖHM
Take advantage of a robust, metal-bodied quick‑change chuck that combines a 1–10 mm clamping range with a secure radial lock for safe operation in both cordless and mains drills; order via Metav Werkzeuge or request consultancy for application-specific advice. RÖHM EXTRA80-RV — Keyless drill chuck, 1–10 mm clamping, 3/8"-24 mount the RÖHM EXTRA80-RV keyless drill chuck is built for demanding workshop use and universal drill compatibility Metal housing with radial locking Clamping range 1–10 mm Compatible with 3/8"-24 mount Reversible for right and left rotation Carbide-tipped jaw chamfers Faster, tool-free bit changes to keep operations moving A keyless operation enables rapid bit swaps, reducing downtime on repetitive tasks. The 1–10 mm clamping range accommodates common twist‑drill and driver bit shanks, while the through‑drilled body allows use with long shank tools. This combination of features is intended to boost workflow efficiency in production and maintenance environments without additional accessories. Built to withstand workshop conditions and protect investments The chuck is housed in a metal body and fitted with dust protection, which means resilient performance in dusty and rough conditions. The radial locking mechanism secures the bit under reversing loads, and the shock‑resistant design supports both handheld and bench applications. Together, these properties extend service life and reduce the frequency of replacements. Broad compatibility for cordless and corded drills, including reverse operation Fitted with a 3/8"-24 mount, the chuck is suited to a wide range of portable and fixed drills. It is specified for right and left rotation, making it suitable for screwdriving tasks that require reversible drive. Additionally, the unit is described as hammer‑drill resistant, so it can be used in machines that feature impact modes where compatible. Precise clamping to reduce slippage and maintain concentricity The jaw chamfers are made from carbide, providing a durable clamping edge that grips shank material firmly and minimises wear. With an outer diameter of 42.7 mm, the chuck offers a compact footprint while delivering consistent axial alignment. Precise clamping reduces runout and slippage, resulting in cleaner holes and longer tool life. For tailored advice on the RÖHM EXTRA80-RV keyless drill chuck and to arrange supply via Metav Werkzeuge, please contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 8002875403NW Type: EXTRA80-RV Product: Keyless drill chuck Mount: 3/8”-24 UID: 8002875403NW Data Clamping range: 1–10 mm Outer diameter: 42.7 mm Packaging unit: 1 Rotation: Right and left rotation Special features Metal housing Radial locking Compatible with cordless and mains drills with self-adjusting Hammer-drill resistant Dust protection Through-drilled Jaw chamfers with carbide Suitable for right and left rotation FAQ Is the chuck suitable for use with cordless screwdrivers? The RÖHM EXTRA80-RV keyless drill chuck is specified for use with cordless drills and screwdrivers and supports self‑adjusting mains drills as noted in its feature set. Can this chuck be used in hammer‑drill mode? According to the product specification, the chuck is described as hammer‑drill resistant, making it suitable for use on drills that provide impact action when the application allows. What mount standard does the chuck use and which drills will accept it? The chuck uses a 3/8"-24 mount, which is compatible with many handheld and benchtop drills that accept this threaded mounting size. How does the radial locking affect performance during reversing? Radial locking increases the retention force on the bit under reversing loads, improving safety and reducing the risk of slippage when running in both right and left rotation. Are the jaw faces wear‑resistant for repeated clamping? The jaw chamfers are specified as carbide, which provides a hard, wear‑resistant gripping surface designed to maintain clamping performance over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.8mm Quick-Change Drill Chuck B 12 1–13mm Capacity Right/Left Rotation, Self-Clamping - RÖHM
Take advantage of a fast, reliable clamping solution that combines self-tightening operation, a 1–13 mm clamping range and a compact B12 mount to keep machining cycles efficient and secure; order the Supra SK quick-change drill chuck directly via Metav Werkzeuge or consult Metav’s advisors for specification support. Supra SK – Self-tightening quick-change drill chuck, 1–13 mm, B12 (RÖHM) The Supra SK is a self-tightening quick-change drill chuck with a B12 mount designed for both right- and left-hand rotation, engineered for workshop and industrial drilling tasks where fast tool changes and reliable clamping are essential Self-tightening quick-change mechanism Clamping range 1–13 mm B12 mount for secure attachment For right- and left-hand rotation Clamping-force safeguard for hammer drills Faster tool changes and consistent clamping for uninterrupted production The self-tightening mechanism provides rapid tool exchange while maintaining a reliable clamping force, which reduces machine downtime and speeds up batch processing. Because the chuck grips automatically during spindle rotation, manual tightening is minimised and repetitive handling is reduced, improving operator efficiency. The integrated clamping-force safeguard is designed to protect the tool retention under the vibration conditions found in high-frequency hammer-drilling, ensuring fewer stoppages and more predictable production cycles. Compact B12 mount and bidirectional rotation for flexible machine use A compact B12 mounting interface makes this chuck suitable for installations where space is limited but secure attachment is required. The capability for right- and left-hand rotation enables reversible drilling and tapping operations without changing the tool holder, expanding the range of tasks that can be completed with a single chuck. With an outer diameter of 42.8 mm, the unit occupies minimal spindle real estate while providing stable support for a wide range of drill sizes. Wide clamping range and industrial application scope The 1–13 mm clamping range accommodates everything from slender pilot drills to general-purpose twist drills, reducing the need for multiple chucks. Built for routine workshop use and tougher industrial environments, the chuck is suitable for handheld and stationary drilling where quick changes and dependable retention matter. Its construction and functional concept favour maintenance-friendly operation, helping to lower the risk of lost tools and the associated production interruptions. For fast, reliable clamping in both workshop and production settings, contact Metav Werkzeuge for expert guidance on the RÖHM Supra SK with B12 mount — call +49 2822 7131930 or email info@metav-werkzeuge.com for specification advice and purchase options Technical data Article number: 4000832133NW Type: Supra SK Product: Quick-change drill chuck Manufacturer: RÖHM Mount: B12 Clamping range: 1–13 mm Rotation direction: Right- and left-hand rotation Outer diameter: 42.8 mm Packaging unit: 1 Additional properties: Self-tightening; clamping-force safeguard for hammer drills with high natural frequency; designed for rapid clamping and release of drill tools Facts Clamping range: 1–13 mm Outer diameter: 42.8 mm Mount: B12 Packaging unit: 1 Special features Self-tightening quick-change mechanism Clamping-force safeguard for high-frequency hammer drilling Suitable for right- and left-hand rotation Compact design for limited spindle space FAQ How large is the clamping range of this chuck? The clamping range is 1–13 mm, allowing the Supra SK quick-change chuck to accept a wide variety of twist drill sizes for versatile workshop use. Is the chuck suitable for reversible drilling operations? Yes, the chuck is specified for right- and left-hand rotation and supports reversible drilling and tapping without swapping the tool holder. Which mount does the chuck use and how compact is it? The unit uses a B12 mount and has an outer diameter of 42.8 mm, making it suitable where a compact, secure attachment is required. Can this chuck cope with hammer-drilling vibrations? The Supra SK includes a clamping-force safeguard specifically intended for hammer drills with a high natural frequency, improving tool retention under vibrational load. What advantages does the self-tightening design offer in production? Self-tightening operation enables faster tool changes and consistent clamping force, which reduces downtime and improves repeatability across production runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42.8mm Supra SK Quick-Change Drill Chuck 1–13mm, Self-Clamping, Reversible Rotation - RÖHM
Take advantage of fast, tool‑free chucking together with reliable clamping for a steadier workflow; the self‑tightening mechanism and 1–13 mm range reduce set‑up time and improve repeatability. Order the Supra SK directly via Metav Werkzeuge or consult our specialists for application advice. Supra SK keyless drill chuck — 1–13 mm clamping, B16 mount by RÖHM Supra SK is a self‑tightening keyless drill chuck designed for B16 mounts, enabling rapid tool changes and secure clamping in both right‑ and left‑hand rotation applications. Self‑tightening for fast tool changes Clamping range 1–13 mm B16 mounting taper Suitable for right‑ and left‑hand rotation Reduce set‑up time with dependable clamping The combination of a self‑tightening mechanism and a broad 1–13 mm clamping span significantly reduces changeover time in mixed drilling operations. The chuck grips standard twist drills and short shank tools without a key, which streamlines workflow and limits interruptions during production. With fewer tool changes and faster seating, run‑times become more predictable; the quick tool changes translate into measurable gains in throughput for repeat tasks and small batch runs. Secure performance for reversing and percussive use Constructed for bidirectional spindles, the chuck supports right‑ and left‑hand rotation and incorporates clamping force retention suitable for machines with higher natural frequencies, including percussion‑enabled systems. This feature helps prevent slippage when direction changes or axial impacts occur, maintaining consistent torque transfer to the tool. The B16 interface provides a compact, rigid connection to the spindle, ensuring the chuck remains stable under reversing loads while preserving machining accuracy. Compact design that endures workshop conditions A compact outer diameter of 42.8 mm keeps the toolholder clear in tight set‑ups and allows improved access to confined workpieces. The B16 mounting taper offers a simple, well‑established interface for many drill heads and toolposts. Supplied as a single unit per package, the chuck is straightforward to fit and maintain; periodic cleaning and light lubrication of the spindle interface are sufficient to sustain reliable function. Built for everyday workshop use, the design balances accessibility with robust clamping to support consistent results across general metalworking and maintenance tasks. For secure, fast clamping on B16 spindles choose the RÖHM Supra SK and contact Metav Werkzeuge for procurement or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 4000832136NW Type: Supra SK Product: Keyless drill chuck Mount: B16 Manufacturer: RÖHM UID: 4000832136NW Data Clamping range: 1–13 mm Outer diameter: 42.8 mm Packaging unit: 1 Special features Self‑spanning, for fast clamping and release Clamping force retention for hammer/percussion drills with high natural frequency Suitable for right‑ and left‑hand rotation (reversible operation) Drehrichtung: for right‑ and left‑hand rotation FAQ Is the chuck compatible with standard B16 spindles? The Supra SK is designed for a B16 mount, so it fits standard B16 interfaces used on many drill heads and toolholders. What tool diameters can the chuck hold? Clamping capacity covers 1–13 mm, enabling use with a wide range of twist drills and small shank tools. Can the chuck be used in reversible drilling operations? Yes, the chuck supports right‑ and left‑hand rotation and includes clamping force retention suitable for reversing spindles. Is the Supra SK suitable for percussion‑capable machines? The chuck features clamping force retention intended to maintain grip under the higher natural frequencies encountered in percussion‑enabled drilling. How many chucks are supplied per package? The product is supplied as a single unit; packaging unit: 1. Hersteller: Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm 3.0-16mm Quick-Change Drill Chuck Self-Tightening With 1/2”–20 Thread, Right-Hand - RÖHM
Take advantage of a secure, self-tightening chuck with a wide 3.0–16 mm clamping range and a standard 1/2"-20 mount for straightforward integration into workshop spindles; the light-duty design keeps handling simple while ensuring reliable bit retention for routine drilling tasks. Order the RÖHM Supra S via Metav Werkzeuge or consult our specialists for suitability checks. RÖHM Supra S Keyless Drill Chuck 3.0–16 mm, 1/2"-20 The RÖHM Supra S is a light-duty, self-tightening keyless drill chuck designed for right-hand rotation and intended for workshop and maintenance drills Self-tightening operation for secure hold Clamping range 3.0–16 mm 1/2"-20 threaded mount Light-duty construction, 46 mm outer diameter Precision hold for consistent drilling results A wide clamping range of 3.0–16 mm enables use with a variety of drill bits and accessories without repeated chuck changes. The self-tightening mechanism increases axial grip as torque rises, which reduces slippage under load and improves hole quality; this technical behaviour makes the chuck particularly effective for repetitive, medium-duty applications. The result is fewer interruptions and a more predictable process flow in everyday workshop operations. Fast installation and spindle compatibility The chuck mounts via a 1/2"-20 internal thread, a common interface for many hand-held and light bench drills, which simplifies retrofitting and reduces downtime when replacing worn or unsuitable chucks. Specified for right-hand rotation, the assembly matches standard drilling directions and avoids unintended reverse loading. Clear interface standards mean compatibility checks are straightforward and integration into existing tooling setups is efficient. Compact form and straightforward maintenance With an outer diameter of 46 mm, the chuck offers a compact footprint that suits confined toolheads and handheld devices while still providing a robust grip surface. The light-duty classification keeps mass low for easier handling and faster bit changes, which benefits frequent tool swaps. Basic care—regular cleaning of the jaws and lubrication of the screw thread—preserves performance and extends service life without complex maintenance procedures. Best uses and application fit Engineered for workshops, maintenance teams and small-scale production environments, this keyless chuck supports common drilling tasks where reliability and quick tool changes matter most. Its design balances convenience and functional grip, making it well suited to repair jobs, assembly work and general fabrication where heavy-duty industrial chucks are not required. The chuck delivers practical benefits for workshop workflows and helps keep operations moving smoothly. Contact Metav Werkzeuge to discuss the RÖHM Supra S for your workshop requirements and arrange delivery; technical advisers are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000832217NW Label: Schnellspannbohrfutter Supra S Spann-D.3,0-16mm 1/2Zoll-20mm f.Re.-Lauf RÖHM Manufacturer: RÖHM Facts Clamping range: 3.0–16 mm Mount: 1/2"-20 (internal thread) Outer diameter: 46 mm Packaging unit: 1 Special features Self-tightening Light-duty version With internal thread For right-hand rotation FAQ What clamping range does the chuck cover? The chuck covers a 3.0–16 mm clamping range, which permits use with a broad selection of common drill bits and small accessories. Is the mount compatible with standard drill spindles? Yes, the chuck uses a 1/2"-20 internal thread mount, making it compatible with many hand-held and light bench spindles that accept this standard. Can this chuck be used on reversible drills? The construction is specified for right-hand rotation; use on reversible machines should respect this direction to ensure the self-tightening behaviour remains effective. How does the self-tightening feature improve performance? The self-tightening action increases jaw grip with applied torque, reducing the risk of slippage and improving drilling consistency during medium-duty tasks. Is the Supra S suitable for heavy industrial use? The Supra S is a light-duty keyless chuck optimised for workshops and maintenance work rather than heavy industrial machining that demands specialised heavy-duty chucks. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
46mm 3.0-16mm Quick-Change Drill Chuck, Self-Clamping, Internal Thread, Right-Hand - RÖHM
Take advantage of a reliable combination of self-tightening clamping and a broad 3.0–16 mm range for consistent drill performance; the light-duty design and internal 5/8"-16 thread simplify installation and minimise downtime. Order the RÖHM Supra S keyless drill chuck directly via Metav Werkzeuge or ask our consultants if needed. RÖHM Supra S keyless drill chuck — 3.0–16 mm clamping range, 5/8"-16 internal thread, self‑tightening The Supra S keyless drill chuck by RÖHM is a light‑duty, self‑tightening chuck with an internal 5/8"-16 connection designed for clockwise (right‑hand) rotation in machining and drilling applications Self‑tightening for secure clamping Clamping range 3.0–16 mm Internal 5/8"-16 thread for direct mounting Compact design with 46 mm outer diameter Reliable clamping that reduces slippage and rework A self‑tightening mechanism converts torque into axial clamping force so that the drill bit remains secure under load; this reduces the risk of slippage and improves hole quality. With a 3.0–16 mm clamping range, the chuck covers a wide span of common drill sizes, eliminating frequent tool changes. The result is a steadier production flow and fewer interruptions for repositioning, which benefits workshops and light industrial users seeking consistent, measurable results. Easy mounting and assured compatibility with standard spindles Designed with an internal 5/8"-16 thread, the chuck mounts directly to compatible spindles without additional adapters, saving assembly time. The compact 46 mm outer diameter keeps the tool head slim for better access in confined setups. Specified for right‑hand (clockwise) rotation, the unit is optimised for conventional drilling machines and ensures predictable behaviour during operation. Clear technical matching avoids costly ordering errors and shortens machine setup. Light‑duty design for faster tool changes and ergonomic handling The light‑duty construction supports frequent tool changes while keeping handling comfortable for operators. Because the chuck is keyless, tightening and releasing bits can be performed quickly, increasing uptime in serial or workshop tasks. This simplified handling contributes to operational efficiency and a smoother workflow without compromising the essential clamping performance expected in everyday drilling tasks. Contact Metav Werkzeuge for tailored advice on the RÖHM Supra S keyless drill chuck and to arrange fast delivery from our Emmerich warehouse Technical data SKU: 4000832218NW Model: Supra S Product type: Keyless drill chuck Brand: RÖHM Clamping range: 3.0–16 mm Arbor / thread: 5/8"-16 Rotation direction: Right‑hand (clockwise) Version: Light‑duty, self‑tightening, with internal thread Outer diameter: 46 mm Packaging unit: 1 UID: 4000832218NW Numbers / Core technical data Clamping range (mm): 3.0–16 Outer diameter (mm): 46 Arbor thread: 5/8"-16 Packaging unit: 1 Special features / Designs Self‑tightening mechanism Light‑duty execution Internal thread for direct mounting Intended for right‑hand rotation FAQ What drill bit sizes does the chuck accept? The chuck accepts drill shanks within the 3.0–16 mm clamping range; the self‑tightening mechanism secures bits across that span. How is the chuck mounted to a spindle? Mounting is via an internal 5/8"-16 thread, allowing direct attachment to compatible spindles without an adapter. Is this chuck suitable for heavy industrial drilling? The Supra S is a light‑duty and self‑tightening design; it is intended for workshop and lighter industrial applications rather than heavy‑duty machining. Does the chuck support left‑hand rotation? This chuck is specified for right‑hand (clockwise) rotation; use in the opposite direction is not advised. Can the chuck be used without a tightening key? Yes — the keyless configuration provides quick bit changes and relies on the self‑tightening action for secure clamping. Manufacturer: RÖHM; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Secure, centred toolholding that keeps production running
A drill chuck is a precision toolholding device designed to grip rotating tools with cylindrical shanks, such as twist drills, countersinks or reamers, and to keep them exactly centred in the spindle axis. Available as both keyed chucks and keyless chucks, chucks are used across manual workstations and automated machining centres where consistent concentricity and repeatable clamping force are required.
How chucks work and where they make a difference
The clamping action is typically achieved by three hardened jaws that move synchronously when the chuck is closed, producing a force-fit, concentric hold on the tool shank. In shop practice a distinction is made between traditional keyed chucks, which deliver maximum holding force via a key, and modern keyless chucks, which enable fast, tool-free changes and often tighten more under increased cutting resistance. For high-speed, automated CNC work, CNC precision chucks with integrated spigot adaptors such as SK or HSK interfaces are used to maintain minimal unbalance and permit very high spindle speeds with tight runout tolerances.
Measurable benefits that improve throughput and tool life
- Reduced runout and scrap through consistent concentricity and minimal lateral displacement
- Faster set-up times when using keyless variants for rapid tool changes
- Higher holding forces with keyed chucks for heavy-duty drilling and high torque applications
- Compatibility with standard tooling (twist drills, reamers, countersinks) for versatile shop use
- Extended tool life by preventing slippage and off-axis loading that cause premature wear and breakage
Metav as the smart choice for dependable toolholding
Metav acts as a quality filter for the European market from its base in Emmerich, combining decades of expertise with a broad, dependable inventory. Backed by 48,000 customers, a range of 250,000 products and a warehouse that ensures reliable supply, Metav is presented as a pragmatic partner for procurement teams seeking consistent quality in drills, chucks and associated tooling. Other industry brands appear in the market context, but Metav’s assortment and sourcing reliability position it as a central, low-risk choice for workshop supply chains.
Technical highlights for reliable accuracy
- Clamping principle: three-jaw radial clamping
- Variants: keyed chucks; keyless chucks; CNC precision chucks with SK/HSK adaptors
- Accepted tools: twist drills, countersinks, reamers, reamers with cylindrical shank
- Performance: designed to prevent tool slippage at high torque; ensures tool runs in spindle axis
- Application: manual bench work, automated CNC centres, high-dynamic machining
Summary
A high-quality drill chuck ensures secure, concentric clamping of rotating tools and is fundamental for avoiding tool breakage, reducing scrap and maintaining dimensional accuracy across drilling operations. Choosing the right chuck type—keyed, keyless or CNC precision—directly improves productivity and tool longevity.
FAQ
What is the difference between a keyed chuck and a keyless chuck?
Keyed chucks are tightened with a key to achieve maximum holding force and are preferred for high-torque applications, whereas keyless chucks enable fast, tool-free changes and can be advantageous where rapid setup is required.
Can drill chucks be used on CNC machines with SK or HSK interfaces?
Yes. CNC precision chucks with SK or HSK adaptors are designed to be mounted on high-speed spindles, providing minimal unbalance and tight runout tolerances suitable for automated machining.
Which tool types are standard for use with a drill chuck?
Drill chucks typically accept twist drills, countersinks and reamers with cylindrical shanks; selection should match the chuck’s clamping range and the machining task.
How does a quality chuck affect tool life and process reliability?
A precision chuck keeps the tool centred in the spindle axis, prevents slippage under load and reduces off-axis forces—all factors that lower premature wear and improve the consistency of produced holes.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com