Precision drill chucks for secure, high-performance machining
Precision drill chucks reliably hold rotating tools with cylindrical shanks, such as twist drills, reamers or countersinks, ensuring centred clamping that prevents slippage and reduces premature tool wear. Designed for both traditional keyed chucks and quick-change, self-tightening variants, these drill chucks deliver fast tool changes and increasing clamping force under load, while CNC precision chucks with SK or HSK interfaces enable high speeds and minimal runout. By using hardened, synchronised jaws that provide a force-fit grip, a quality chuck maintains the tool on the spindle axis and extends tool life, improves hole accuracy and supports consistent production.
196mm Extension Sleeve MK2 to MK3 Hardened Ground to DIN 2187, D36mm - TECWERK
Take advantage of a DIN 2187‑compliant sleeve that combines precision, hardened construction and a compatible MK2–MK3 taper for reliable tool mounting; order directly via Metav Werkzeuge or consult the team for application guidance. Extension sleeve DIN 2187 MK2×MK3, hardened and ground — TECWERK The Extension sleeve DIN 2187 MK2×MK3 is a hardened and ground adaptor sleeve for extending reach and adapting tools with a Morse taper to an MK2 spindle, suited to precision workshop and industrial applications. DIN 2187 compliant accuracy version Fully hardened and ground inside and out MK2 outer taper to MK3 inner taper 196 mm overall length for extended reach Precision and repeatable concentricity for high‑accuracy machining The sleeve is designed to meet DIN 2187, ensuring a defined tolerance class for toolholders and adaptors. Manufactured as an accuracy version, the component is hardened and ground, which reduces deformation under load and preserves concentricity during repeated mounting cycles. This combination gives consistent run‑out performance and supports tight process tolerances in milling, drilling and turning operations, translating directly into lower scrap rates and fewer setup interruptions. Secure taper fit and clear dimensional compatibility for tool selection With an outer MK2 taper and inner MK3 taper, the adaptor permits use of smaller Morse‑taper tools in larger machine spindles without bespoke tooling changes. Key dimensions are D: 36 mm, L1: 121 mm and L2: 196 mm, offering a long‑reach option where extra clearance or accessibility is required. The construction suits tools with a Morse taper, maintaining a positive mechanical fit that simplifies changeover and preserves clamping reliability in production environments. Durable construction to reduce downtime and maintenance Built fully hardened and ground inside and out, the sleeve stands up to workshop stresses and resists wear over prolonged use. The robust finish reduces fretting and abrasive wear at contact surfaces, extending service life and cutting maintenance intervals. Reliability in the toolholder interface contributes to smoother machining, less vibration and a reduced need for rework — benefits that support efficient shopfloor routines and stable process outputs. Contact Metav Werkzeuge for availability and application advice on the TECWERK extension sleeve (SKU 2000832325NW) — call +49 2822 7131930 or email info@metav-werkzeuge.com to request technical details or ordering support Technical Data Article number: 2000832325NW Description: Extension sleeve DIN 2187 MK2×MK3, hardened and ground Manufacturer: TECWERK Facts D: 36 mm L1: 121 mm L2: 196 mm Packaging unit: 1 Special features DIN 2187 Accuracy version Fully hardened Ground inside and out For tools with Morse taper MK2 outer taper MK3 inner taper FAQ What materials is this sleeve suitable for when used in machining applications? The extension sleeve is a mechanical adaptor and does not limit material choice; when fitted as intended the TECWERK extension sleeve (MK2×MK3, SKU 2000832325NW) supports machining of steels, non‑ferrous metals and typical workshop materials depending on the mounted tool and machine settings. How does DIN 2187 classification affect workshop use? DIN 2187 specifies dimensional and run‑out criteria for adaptors and sleeves; compliance for this TECWERK sleeve means predictable mating characteristics, consistent concentricity and suitability for precision toolholding in serial production. Is the sleeve suitable for long‑reach drilling and milling operations? Yes, the 196 mm overall length provides additional reach compared with standard sleeves, making it appropriate for applications that require extended clearance while retaining a secure taper fit. How should the sleeve be installed to ensure correct taper engagement? Clean all taper surfaces before assembly and ensure proper seating into the spindle; the hardened and ground finish on the sleeve promotes reliable contact. For specific mounting torque or retention systems consult Metav Werkzeuge for machine‑specific guidance. Can this adaptor be used interchangeably with other brands of Morse taper tooling? The sleeve follows DIN 2187 and is intended for standard Morse taper tooling; compatibility with other brands should be determined by verifying taper sizes and tolerances against the tool catalogue; reference SKU 2000832325NW when checking fit. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
196mm Morse Taper MT5 Shank With B18 Drill Chuck Mount, Hardened And Ground - TECWERK
Take advantage of a robust combination of MT5 taper fit, DIN 238 drill‑chuck compatibility and a fully hardened and ground finish for secure, repeatable chuck mounting; order the taper arbor directly via Metav Werkzeuge or consult the team for application advice. Taper arbor MT5 × B18 — hardened MT5 taper with DIN 238 drill‑chuck shank (TECWERK) Taper arbor MT5 × B18 provides a precise mounting solution for drill chucks on drilling and turning machines, optimised for repeated setups and secure toolholding. Taper MT5 for reliable chuck mounting DIN 238 drill-chuck shank compatibility Fully hardened and precision ground 196 mm overall length for extended reach Secure connection for consistent toolholding The MT5 taper construction ensures a firm mechanical interface that reduces radial runout and improves repeatability during serial operations. Because the arbor is supplied with a DIN 238 drill‑chuck shank, it directly accepts standard chucks, eliminating adaptors and saving setup time. This direct mount reduces spindle wear and supports consistent hole quality across batches, which is particularly important in production environments where each minute of downtime has a cost. Reduced setup time through precise finish A fully hardened and ground shaft provides a uniform contact surface that promotes accurate seating in the machine spindle and chuck. The precision finish lowers the need for frequent recalibration and minimises micro‑movement under load, so cycle times stay predictable and rework is less likely. For workshops that run mixed operations on drills and lathes, the arbor's compatibility and finish contribute to a measurable improvement in operational efficiency and component consistency. Durable design for everyday industrial use Built for routine use in machining environments, the taper arbor offers robust service life thanks to its hardened construction and precision grinding. The 196 mm overall length gives extended reach for deeper setups without compromising stability. Combined, these attributes deliver long‑term reliability and fewer tool changes, supporting uninterrupted workflows and a steady production rhythm that benefits both maintenance planning and throughput. For dependable chuck mounting with the TECWERK MT5 taper arbor and tailored application advice, contact Metav Werkzeuge for professional guidance and prompt supply from Emmerich Technical Data Article number: 2000832344NW Product: Taper arbor Manufacturer: TECWERK Standard: DIN 238 Facts Taper: MT5 Shank connection: B18 Overall length: 196 mm Special features With drill‑chuck shank DIN 238 Fully hardened and ground For mounting drill chucks on drilling and turning machines FAQ What taper and shank does the arbor use? The taper arbor uses an MT5 taper and a B18 shank designed for drill chucks with DIN 238 compatibility. Can this arbor accept standard drill chucks directly? Yes. The arbor is supplied with a DIN 238 drill‑chuck shank, so standard chucks fit directly without additional adapters. Is the surface treatment suitable for heavy duty use? The shaft is fully hardened and precision ground, providing a wear‑resistant contact surface suited to regular industrial application. What is the overall length and how does that affect setup? The overall length is 196 mm, offering greater reach for deeper set‑ups while maintaining stable seating and toolholding. Which product reference should be quoted when ordering or enquiring? Please quote the article number 2000832344NW and the designation taper arbor MT5 × B18 when contacting sales or technical teams. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
19mm 0.2-1.5mm Quick-Change Drill Chuck B6 Self-Clamping High Runout Accuracy, Hardened Replaceable Parts - ALBRECHT
Benefit from the combination of self‑centring clamping, a 0.2–1.5 mm clamping range and hardened, replaceable wear parts to secure consistent high‑precision performance; for procurement or technical queries consult Metav Werkzeuge. ALBRECHT SBF quick‑change drill chuck – 0.2–1.5 mm, B6 taper, right‑hand rotation A ALBRECHT SBF quick‑change drill chuck engineered for B6 taper spindles with right‑hand rotation, ideal for precision micro‑drilling and high‑repeatability applications. Self‑centring spindle for accurate runout Clamping range 0.2–1.5 mm Hardened, ground and replaceable wear parts B6 taper for secure spindle mounting Consistent accuracy for micro‑drilling tasks The ALBRECHT SBF quick‑change drill chuck offers a self‑centring mechanism that ensures reliably low axial and radial deviation when clamping small‑diameter tools. With a clamping range 0.2–1.5 mm, the chuck is tailored to micro‑drills and tiny end mills; this narrow range reduces slippage and improves concentricity. High clamping force minimises chatter and tool vibration, which directly benefits hole quality and repeatability in series production. Runout is a key parameter for small diameters: lower runout accuracy means longer tool life and fewer rejected parts. Durable, serviceable construction for lower downtime Built for sustained use under heavy demands, this chuck features hardened and ground components and replaceable wear parts. Such a construction reduces the need for whole‑unit replacements and enables predictable maintenance cycles. The case‑hardening and grinding of contact surfaces maintain precise seating between the jaws and body, preserving clamping performance over time. For workshops aiming to keep spindle uptime high, the ability to exchange wear items quickly translates into less production interruption and reduced total cost of ownership. Straightforward integration into precision workflows The chuck mounts via a B6 taper, providing a compact and secure connection to compatible spindles, and presents an outer diameter 19 mm for tight‑space installations. Designed for right‑hand rotation, it aligns with standard spindle directions in most machining setups. Its quick‑change nature shortens tool‑change cycles and supports higher throughput in small‑part manufacturing. Whether used in micro‑drilling, PCB machining or fine mechanical fabrication, this chuck simplifies tool handling and helps maintain process stability across repeated cycles. Contact Metav Werkzeuge for spindle compatibility checks and to arrange supply of ALBRECHT SBF quick‑change drill chucks Technical data Article number: 4120167201NW Brand: ALBRECHT Product type: Quick‑change drill chuck Type designation: SBF Packaging unit: 1 Core data Clamping range: 0.2–1.5 mm Outer diameter: 19 mm Taper: B6 Rotation direction: Right‑hand Special features Self‑centring operation Maximum clamping force With taper mounting Built for high continuous stress with top runout accuracy All wear parts case hardened, ground and replaceable Designed for right‑hand rotation FAQ What clamping range does the chuck cover? The ALBRECHT SBF quick‑change drill chuck covers a 0.2–1.5 mm clamping range suitable for micro‑drills and similar small tooling. Is the chuck self‑centring? Yes, the chuck is self‑centring, which promotes low runout and consistent concentricity when clamping small‑diameter tools. Can worn parts be replaced? Worn components are replaceable; all wear parts are case hardened and ground to allow targeted servicing without replacing the entire chuck. Which spindle taper is required? The unit mounts on a B6 taper, providing a compact, secure interface for compatible spindles. Is the chuck suitable for continuous operation under high load? The chuck is designed for high continuous stress and offers maximum clamping force with high runout accuracy to support demanding production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
215mm Extension Sleeve MK3×MK3 Hardened Ground According To DIN 2187 - TECWERK
Benefit from the combination of DIN 2187 accuracy, fully hardened and ground surfaces, and a 215 mm overall length for reliable extended-reach machining. Order the extension sleeve directly via Metav Werkzeuge or ask our consultants for technical advice. Extension sleeve DIN 2187 MK3×MK3 – TECWERK The Extension sleeve DIN 2187 MK3×MK3 is an industrial extension sleeve that extends Morse taper tooling to reach deeper bores while maintaining precision and interchangeability for workshop and toolroom applications DIN 2187 accuracy version Fully hardened and ground inside and out For tools with Morse taper MK3 Total length 215 mm for extended reach Engineered for consistent machining accuracy Manufactured to the DIN 2187 specification, this extension sleeve is designed as an accuracy version to ensure repeatable positioning and stable results in precision operations. The internal and external surfaces are hardened and ground, which reduces surface distortion and helps preserve the intended geometry under load. As a consequence, tool runout is minimised and concentricity is maintained, delivering reliable component tolerances in milling, drilling and reaming tasks where repeatability is essential. Extended reach with retained rigidity With a total length of 215 mm and a usable length of 112 mm, the sleeve provides additional reach for machining tasks that would otherwise require inconvenient setups or special tooling. The larger outer diameter (D 36 mm) contributes to torsional stiffness, so extended-reach applications do not come at the expense of stability. This design reduces the need for multiple tool changes and simplifies clamping strategies, improving workflow efficiency on production runs and one-off engineering tasks alike. Built to withstand regular workshop use The sleeve is supplied in a fully hardened and ground finish both internally and externally, which enhances surface wear resistance and reduces the frequency of replacement. The robust treatment of contact faces ensures long service life in continuous-shop environments, while precision grinding provides smooth mating with mating tapers. The Extension sleeve DIN 2187 MK3×MK3 by TECWERK is therefore suited to workshops that demand dependable tooling performance with low maintenance overhead. Easy integration and broad compatibility Standardised to DIN 2187 and fitted with MK3 internal and external tapers, this sleeve is compatible with a wide range of Morse taper tooling and spindles, enabling straightforward interchangeability across machines and fixtures. The adherence to the norm simplifies procurement and setup, allowing toolrooms to maintain consistent inventories and reduce adapter complexity. That interoperability supports faster changeovers, fewer assembly errors and a more predictable production flow. For detailed application advice or to arrange supply from Metav Werkzeuge’s Emmerich warehouse, contact Metav Werkzeuge for expert guidance and dependable delivery Technical Data Article number: 2000832340NW Standard: DIN 2187 Product: Extension sleeve Manufacturer: TECWERK Packaging unit: 1 Facts Total length L2: 215 mm Usable length L1: 112 mm Outer diameter D: 36 mm Internal taper: MK3 External taper: MK3 Special features Accuracy version to DIN 2187 Fully hardened and ground inside and out Designed for tools with Morse taper FAQ What tolerance and precision can be expected from this sleeve? The extension sleeve complies with the DIN 2187 accuracy version; the TECWERK extension sleeve is ground and hardened to preserve concentricity and provide consistent repeatability. Is the sleeve compatible with MK3 tooling and spindles? Yes, the product features an internal and external MK3 taper and is intended for use with Morse taper tooling, ensuring direct compatibility. What are the main dimensions of the sleeve? The TECWERK extension sleeve has a total length of 215 mm (L2), a usable length of 112 mm (L1) and an outer diameter of 36 mm. Can the sleeve be used for deep-hole drilling or long-reach operations? The 215 mm overall length is specifically provided to extend tool reach while retaining rigidity, so the sleeve is suitable for many deep or hard-to-access machining tasks. How is the sleeve finished and what does that mean for service life? The extension sleeve is fully hardened and ground inside and out; this surface treatment improves wear resistance and helps maintain precise taper contact over prolonged use. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
215mm Extension Sleeve MK4 to MK2 Hardened Ground, DIN 2187 - TECWERK
Combining DIN 2187 precision with a hardened and ground finish and a Morse taper transition from MK4 to MK2, this extension sleeve provides stable tool seating and consistent run-out control for demanding machining operations; secure supplies and technical advice are available through Metav Werkzeuge. Extension Sleeve DIN 2187 MK4 x MK2, hardened & ground — TECWERK A Extension Sleeve DIN 2187 MK4 x MK2 (TECWERK) engineered to adapt larger spindles to MK2 tools while maintaining concentricity and reliable clamping in industrial machine shops. DIN 2187 compliance for tool holders Morse taper MK4 to MK2 adaptation Hardened and ground inside and out Precision dimensions D 30 mm, L 215 mm High-precision adaptation for consistent machining results The sleeve is designed to provide a secure Morse taper transition between MK4 and MK2 interfaces, ensuring reduced runout and stable tool seating during operation. Manufactured to DIN 2187 and executed in a precision accuracy version, the component is hardened and ground both internally and externally, which minimises deformation under load and preserves concentricity over repeated use. This translates into fewer rejects, longer tool life and predictable performance in milling, drilling and reaming applications where concentricity is critical. Robust construction that supports productive uptime A fully worked and finished sleeve delivers mechanical reliability: the hardened substrate resists wear, while the ground surfaces ensure a close fit with the mating tapers. The combination of surface treatment and accuracy grading reduces fretting and micromovement between spindle and tool, which supports repeatable setups and limits vibration. With a nominal diameter of D 30 mm and a total length of 215 mm, this component is suitable for operations requiring extended reach without compromising stability. Practical compatibility and quick integration into existing toolrooms The sleeve is intended for tools presented with a Morse taper, facilitating straightforward adaptation of MK2 shanks to MK4 spindles. Key dimensions such as L1 97.5 mm and overall length 215 mm allow planners to check clearance and engagement depth at a glance. Installation is simple: clean contact surfaces, press-fit the sleeve according to standard machine practice and verify seating; correct mounting secures the intended concentricity benefits. Regular inspection of the tapered faces and routine cleaning will maintain the performance advantages over long service intervals. For tailored advice on application and delivery from Metav Werkzeuge — including compatibility checks and supply from Emmerich — contact our technical team via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832364NW Standard: DIN 2187 Type: Extension sleeve Brand: TECWERK Facts Total length L2: 215 mm Engagement length L1: 97.5 mm Diameter D: 30 mm Inner taper: MK2 Outer taper: MK4 Special features Hardened and ground inside and out Accuracy execution (precision version) For tools with Morse taper Designed per DIN 2187 FAQ What applications is this extension sleeve suitable for? The Extension Sleeve DIN 2187 MK4 x MK2 (TECWERK, SKU 2000832364NW) is suitable for adapting MK2 shank tools to MK4 spindles in machining tasks where concentricity and stiffness are required. How does the hardened and ground finish benefit workshop use? A hardened and ground finish on the sleeve ensures wear resistance and precise mating surfaces, which for the TECWERK extension sleeve reduces runout and extends the life of both the sleeve and the mounted tools. Are the dimensions compatible with standard Morse taper tooling? Yes; the component follows DIN 2187 and provides an MK4 outer taper to accept an MK2 inner taper, with key dimensions D 30 mm, L2 215 mm and L1 97.5 mm for easy verification against existing tooling. What maintenance is recommended to preserve accuracy? Keep the tapered faces free from debris and corrosion, inspect mating surfaces for nicks, and follow standard machine-shop mounting procedures; regular checks maintain the precision benefits of this TECWERK extension sleeve. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
225mm Ejector for Morse Taper MK4 DIN 317 - TECWERK
Robust compliance with DIN 317, compatibility with Morse taper MT4 and a 225 mm overall length combine to deliver dependable removal of tool tapers while reducing machine downtime; order the taper drift directly via Metav Werkzeuge or ask our consultants if needed. Taper Drift DIN 317 for Morse taper MT4 – 225 mm (TECWERK) The Taper Drift DIN 317 for Morse taper MT4 is a purpose-made tool for releasing tool tapers from standardised spindles and holders in workshops and maintenance shops. Complies with DIN 317 For Morse taper MT4 Overall length 225 mm Fits standard tool tapers Faster, safer taper removal for productive workshops Engineered to the DIN 317 guideline, this taper drift delivers consistent engagement with standardised tapers, cutting the time needed to free lodged tool tapers and minimising potential damage to holders. The controlled geometry of the taper drift ensures predictable force transmission, so maintenance cycles run more smoothly and toolroom throughput is improved. The clear standard conformity also simplifies planning and spare-part logistics. Designed for compatibility with standard tool tapers Conformity with both DIN 317 and compatibility for tool tapers to DIN 228 means the tool matches common workshop interfaces. Compatibility with Morse taper MT4 guarantees the correct fit for a wide range of drills and arbors that use this taper size. For technicians and buyers this standard alignment reduces the need for trial-and-error, enabling quick identification of the correct extraction tool and streamlining inventory management in the workshop. Practical handling that reduces downtime At 225 mm overall length the drift provides sufficient reach for deeper-seated tapers while remaining compact enough for routine handling. The simple geometry allows controlled, repeatable strikes that reduce the risk of skewed impacts and consequent damage. In everyday use the extraction tool is straightforward to store and combine with existing tool-maintenance workflows, supporting quicker turnarounds and less idle machine time — a direct efficiency gain for production and service teams. Who benefits and where it fits best Maintenance technicians, toolroom staff and production engineers benefit from a standardised, rugged extraction tool that integrates with common holders and arbors. The combination of recognised standards, practical length and straightforward use makes the drift well suited to industrial workshops, service benches and tooling rooms where repeatable, low-risk extraction is essential. For specific application queries, Metav Werkzeuge’s consultants can advise on compatibility and availability. For availability and tailored advice on the TECWERK taper drift for Morse taper MT4, contact Metav Werkzeuge for rapid delivery from Emmerich and technical guidance – phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000832763NW Standard: DIN 317 Type: Taper drift Label: Austreiber DIN 317 MK4 z.Werkzeugkegel Manufacturer: TECWERK Facts Total length: 225 mm Packaging unit: 1 Special features For tool taper according to DIN 228 Suitable for Morse taper MT4 Fits standard tool tapers Complies with DIN 317 FAQ Is this taper drift compatible with MT4 tool holders? The taper drift described is designed for Morse taper MT4 and is supplied by TECWERK (SKU 4000832763NW), making it suitable for MT4 arbors and holders that adhere to the corresponding standards. What does the DIN 317 standard guarantee? DIN 317 specifies dimensions and functional requirements for extraction devices of this type; the Taper Drift DIN 317 for Morse taper MT4 meets these requirements, ensuring standardised fit and predictable performance. Will the 225 mm length reach deep-seated tapers? With an overall length of 225 mm, the drift provides additional reach compared with shorter variants, allowing access to deeper-seated tapers while remaining manageable for routine workshop use. Which users and workplaces benefit most from this tool? The extraction tool is aimed at maintenance technicians, toolroom personnel and production engineers who work with Morse tapers and require a reliable, standards-compliant method to dislodge tool tapers without risk to holders. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
240mm Extension Sleeve MK3xMK4 Hardened Ground, DIN 2187 - TECWERK
Take advantage of a hardened, precision‑ground construction and DIN 2187 conformity to ensure secure, low‑runout tool holding and reliable repeatability in everyday workshop use. Order the part directly via Metav Werkzeuge or consult our technical team for application advice. Extension sleeve DIN 2187 MT3×MT4 — hardened and ground, precision version (TECWERK) An extension sleeve DIN 2187 MT3×MT4 for accurate, secure mounting of tools with Morse tapers in machining and tool‑holding applications. DIN 2187 accuracy version Hardened and ground inside and outside For tools with Morse taper MT3×MT4 Outer diameter 48 mm, length 240 mm Precision retention for Morse‑taper tooling that improves runout and repeatability The sleeve is manufactured to DIN 2187, offering a defined interchangeability level for Morse‑taper tooling. By using a fully hardened body with both inner and outer surfaces ground, the adapter provides a consistent seating surface that reduces radial runout and vibration during spindle rotation. For workshops that rely on repeatable concentricity, this means fewer re‑setups and higher first‑pass accuracy. The DIN reference also simplifies procurement and replacement planning, because compliance with the standard ensures compatibility with other DIN‑rated holders. Engineered to withstand routine workshop stresses and handling Constructed in a precision execution, the sleeve resists wear from repeated mounting and dismounting thanks to its heat‑treated structure. The combination of full hardening and precision grinding translates into extended service life and steady performance under cyclic loads. Where downtime and maintenance budgets are critical, the robust construction lowers the frequency of replacements and contributes to a steadier production flow. The hardened finish also helps preserve the taper geometry that determines how securely a tool is held. Clear compatibility and straightforward fitting for Morse taper toolsets Designed specifically for use with tools that have a Morse taper, the adapter matches an outer MT3 taper to an inner MT4 taper, allowing smaller spindles or adaptors to accept larger Morse‑taper tooling where required. Installation is mechanical and familiar to experienced machinists: insert, seat and secure per usual workshop practice. For those less familiar with taper standards, a Morse taper is a self‑locking conical fitting that locates and centres tooling without separate clamping, providing a clean mechanical interface when dimensions and finish are correct. Standard conformity and measurable dimensions for planning and inventory The adapter’s measurable attributes support planning and machine setup: an outer diameter of 48 mm, an overall length of 240 mm and a seated length of 146 mm are provided to verify clearance and reach in chucks, spindles and toolposts. These numeric data facilitate tool‑table checks and ensure the sleeve integrates into existing tooling systems without guesswork. Choosing a DIN‑specified component simplifies procurement, since parts from different suppliers that conform to the same standard are functionally compatible. For machining operations that value secure seating and long‑term stability, contact Metav Werkzeuge to arrange supply or technical clarification on the TECWERK DIN 2187 extension sleeve — our specialists in Emmerich can advise on fitment and stock availability. Technical Data SKU: 2000832362NW Standard: DIN 2187 Product: Extension sleeve (DIN 2187) Brand: TECWERK Facts Outer diameter: 48 mm Overall length (L2): 240 mm Seated length (L1): 146 mm Inner taper: MT4 Outer taper: MT3 Packaging unit: 1 Special features Accuracy execution (precision version) Fully hardened construction Inner and outer surfaces ground For tools with Morse taper FAQ Is this sleeve compatible with standard Morse‑taper tools? Yes. The extension sleeve is specified to DIN 2187 and designed to adapt between an outer MT3 taper and an inner MT4 taper, allowing standard Morse‑taper tooling to be used where this adapter is fitted. What are the key benefits of the hardened and ground finish? The hardened, ground surfaces on the sleeve reduce wear and maintain taper geometry, which improves seating accuracy and lowers radial runout for more consistent machining results with the TECWERK adapter. Which dimensions should be checked before ordering the sleeve? Confirm spindle or holder clearance against the sleeve’s outer diameter of 48 mm and overall length of 240 mm, and ensure the seated length of 146 mm fits within the available mounting space. Does the sleeve require special maintenance? Routine inspection for burrs or contamination and gentle cleaning of the mating tapers is recommended; the hardened and ground finish is designed for longevity under normal workshop use. Can the adapter be used for heavy‑duty turning and milling operations? The sleeve’s hardened construction and precision grinding are intended to sustain regular workshop loads; specific suitability depends on the intended cutting parameters and machine rigidity. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
240mm Extension Sleeve MK4 to MK3 Hardened Ground, DIN 2187 - TECWERK
Benefit from the combination of DIN 2187 compliance, a fully hardened and ground finish, and a long 240 mm overall length for stable tool extension and consistent concentricity; order the extension sleeve directly via Metav Werkzeuge or ask our consultants if needed. Extension sleeve DIN 2187 MK4×MK3, hardened and ground — TECWERK A Extension sleeve DIN 2187 MK4×MK3 designed to extend Morse taper tooling with high precision and a hardened, finely ground bearing surface for machining applications DIN 2187 standardised accuracy version Fully hardened and ground inside and out Adapts MK4 to MK3 Morse tapers 240 mm overall length, D 36 mm Reliable alignment and reduced runout for consistent machining The extension sleeve follows DIN 2187, supplying a standardised interface that maintains tool alignment across repeated insertions. Its fully hardened body and surfaces ground inside and out reduce taper wear and help preserve concentricity during extended runs. For workshops that prioritise repeatable results, the accuracy execution minimises radial runout and contributes to consistent hole quality and surface finish. The adapter construction also reduces the risk of fretting between mating tapers, prolonging the service life of both tool and holder. Greater reach while retaining secure taper connection With an overall length of 240 mm (L2) and a working length L1 of 122.5 mm, this extension is suited to operations requiring extra reach without compromising stability. The combination of an external MK4 taper and internal MK3 taper lets the component be used as a reliable link between different Morse taper sizes, enabling deeper access in bores or extended tooling setups. The stated diameter D 36 mm gives a robust cross-section that resists bending under typical machining loads, so the tooling stack remains rigid and predictable. Workshop-grade durability and low maintenance Manufactured in an accuracy grade and treated to be entirely hardened, the sleeve is supplied ready for service with minimal preparation. The ground internal and external surfaces ensure trouble-free seating with Morse taper tooling and lower the need for frequent rework or adjustment. Where replacement intervals impact uptime, the hardened and ground finish helps retain dimensional integrity, reducing the frequency of swaps and supporting steadier production cycles in small and large workshops alike. Broad compatibility across Morse taper tooling Intended for use with tools and holders featuring Morse tapers, the component integrates seamlessly into conventional drilling and tooling systems that adhere to DIN standards. The adapter’s geometry and finish make it appropriate for retrofit tasks and mixed-equipment environments, offering a straightforward technical solution when a change of taper size is required. The standardised design also simplifies inventory management: one precision sleeve covers a defined adaptation need while matching existing tool protocols. For procurement of the TECWERK extension sleeve with DIN 2187 accuracy and a 240 mm overall length, contact Metav Werkzeuge for tailored supply and technical advice. Technical data Article number: 2000832365NW Standard: DIN 2187 Product: Extension sleeve Manufacturer: TECWERK Facts Overall length L2: 240 mm Working length L1: 122.5 mm Diameter D: 36 mm Packaging unit: 1 Special features Accuracy execution according to DIN 2187 Fully hardened construction Ground inside and out Inner taper: MK3 Outer taper: MK4 For tools with Morse taper FAQ What standard does the adapter comply with? The adapter is manufactured to DIN 2187, ensuring standardised dimensions and fit for Morse taper tool compatibility. Which taper sizes are connected by this sleeve? This sleeve adapts an external MK4 taper to an internal MK3, enabling secure mating between those Morse taper sizes. How long is the extension and what is the effective working length? The extension has an overall length of 240 mm with a working length (L1) of 122.5 mm for extended reach in tooling assemblies. Is the component heat-treated or ground for accuracy? Yes, the sleeve is completely hardened and ground both internally and externally to provide an accuracy execution suitable for precision tooling. Which diametral size does the sleeve have? The sleeve features a diameter of 36 mm (D), offering a solid cross-section for stable performance. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
24mm Schnellspannbohrfutter Spann-Ø 0,2-3mm selbstspannend, für Rechtslauf - ALBRECHT
Schnellspannbohrfutter SBF Spann-Ø 0,2-3mm B10 Rechtslauf – ALBRECHT Schnellspannbohrfutter SBF für präzise Bohrungen mit Kegelaufnahme B10, ausgelegt für Rechtslaufbetrieb und feinjustierten Spannbereich Präzise Spann-Ø 0,2–3 mm Kegelaufnahme B10 für sichere Kraftübertragung Selbstspannend mit hoher Spannkraft Einsatzgehärtete, geschliffene Verschleißteile Optimiert für höchste Rundlaufgenauigkeit Hohe Effizienz durch gezielte Spannleistung Das Schnellspannbohrfutter überzeugt durch maximale Spannkraft bei sehr kleinem Spannbereich, was besonders feine Bohrungen stabil ermöglicht. Die Kombination aus selbstspannender Mechanik und der Kegelaufnahme B10 sorgt für direkte Kraftübertragung und reduziert Werkzeugspiel. Für Fertigungsprozesse bedeutet das: weniger Ausschuss, konstante Bohrqualität und geringere Rüstzeiten. Anwender profitieren unmittelbar von der höheren Prozesssicherheit und planbaren Produktionszyklen. Langlebigkeit und Wartungsfreundlichkeit für den Werkstattalltag Durch eingesetzte einsatzgehärtete und geschliffene Verschleißteile ist die Lebensdauer deutlich erhöht; Bauteile sind austauschbar, was Reparaturzeiten verkürzt. Die robuste Ausführung schützt vor Verformung bei Dauerbeanspruchung und erhält die Rundlaufgenauigkeit über lange Laufzeiten. Dadurch reduzieren sich Instandhaltungsaufwand und Betriebskosten, was besonders in mittelständischen Betrieben den laufenden Betrieb wirtschaftlicher macht. Anwendungsfelder und Zielgruppe Das Produkt ist ausgelegt für präzise Zerspanungsaufgaben an Dreh- oder Bohrmaschinen mit B10-Aufnahme und Rechtslauf. Typische Anwender sind Werkzeugmacher, Feinmechaniker und Produktionsbetriebe, die hohe Genauigkeit bei kleinen Durchmessern verlangen. Das Bohrfutter eignet sich für Serienfertigung ebenso wie für Einzelteile mit hohen Qualitätsanforderungen. Die einfache Montage und Austauschbarkeit der Teile macht es attraktiv für Werkstätten mit begrenzter Stillstandszeit. Technische Vorteile, kurz erklärt Die Kegelaufnahme garantiert axiale und radiale Stabilität; der enge Spannbereich erlaubt sichere Fassung von Feinstbohrern. Rechtslauf als spezifizierte Drehrichtung vermeidet Missverständnisse beim Einsatz. Solche Merkmale sind besonders relevant, wenn höchste Präzision bei kleinen Bohrdurchmessern gefordert wird. Für präzise Kleinstbohrungen empfiehlt sich das Schnellspannbohrfutter SBF von ALBRECHT – Bestellungen und technische Beratung über Metav Werkzeuge GmbH per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Leistungsmerkmale Artikelnummer: 4120167202NW Marke: ALBRECHT Produktart: Schnellspannbohrfutter Typ: SBF Aufnahme: B 10 Verpackungseinheit: 1 Fakten Spannbereich: 0,2–3 mm Außendurchmesser: 24 mm Besonderheiten selbstspannend maximale Spannkraft mit Kegelaufnahme B10 (Kegelaufnahme für präzise Kraftübertragung) für hohe Dauerbeanspruchung bei höchster Rundlaufgenauigkeit alle Verschleißteile sind einsatzgehärtet, geschliffen und austauschbar Drehrichtung: Rechtslauf FAQ Welche Spannbereiche deckt das Schnellspannbohrfutter ab? Das Schnellspannbohrfutter SBF von ALBRECHT deckt einen Spannbereich von 0,2–3 mm ab und eignet sich damit besonders für Feinstbohrer und präzise Kleinstbohrungen. Welche Aufnahme ist notwendig für die Montage? Für die Montage wird eine B10-Kegelaufnahme benötigt. Die Kegelaufnahme gewährleistet sichere Kraftübertragung und stabilen Rundlauf. Sind Ersatzteile verfügbar und austauschbar? Ja, alle Verschleißteile des ALBRECHT Schnellspannbohrfutters sind einsatzgehärtet, geschliffen und austauschbar, was die Instandhaltung vereinfacht. Für welche Drehrichtung ist das Bohrfutter ausgelegt? Das Schnellspannbohrfutter ist für Rechtslauf ausgelegt und entsprechend gekennzeichnet. Für welche Anwendergruppen ist das Produkt besonders geeignet? Das ALBRECHT Schnellspannbohrfutter richtet sich an Werkzeugmacher, Feinmechaniker und Produktionsbetriebe, die bei kleinen Bohrdurchmessern höchste Präzision verlangen. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
265mm Morse Taper Extension Sleeve MT4×MT4 Hardened Ground, DIN 2187 - TECWERK
Take advantage of the combination of DIN 2187 conformity, fully hardened and ground surfaces and precise MK4 taper fit to maintain tool concentricity and production reliability; order directly via Metav Werkzeuge or consult the team for application advice. Extension sleeve DIN 2187 MK4×MK4 — hardened and ground, 265 mm overall length (TECWERK) The Extension sleeve DIN 2187 MK4×MK4 is a hardened, ground adapter for extending Morse taper tooling, designed for accurate tool holding and consistent centring in machine spindles and tailstocks. DIN 2187 standard, precision version Fully hardened and ground inside and out For tools with Morse taper MK4 to MK4 265 mm overall length, 48 mm diameter Reliable accuracy for repeatable machining results The extension sleeve is manufactured to DIN 2187, ensuring defined tolerances and a reproducible interface for Morse taper tooling. Its hardened and ground inner and outer surfaces reduce wear and maintain tight contact between tool and adapter, which improves concentricity and minimises radial deviation during machining. For production environments where tooling repeatability matters, the precision finish translates directly into fewer quality checks and less scrap. Straightforward compatibility and secure seating With both inner and outer tapers specified as MK4, the adapter matches standard Morse taper toolholders and accessories, enabling seamless integration into existing setups. The geometric dimensions — 48 mm outside diameter and an overall length of 265 mm with a usable L1 of 147.5 mm — provide predictable extension while preserving rigidity. Because the taper fits are ground to specification, seating is secure and the risk of slippage under load is significantly reduced, which supports consistent cycle times in workshop and light production use. Built for longevity and low maintenance in the workshop The all-hardened construction combined with precision grinding reduces fretting and surface damage, extending service life compared with non-hardened alternatives. The design requires minimal upkeep: regular inspection and light cleaning of the taper seats are usually sufficient to retain accurate seating. Given the material treatment and finish, the adapter offers a long service interval and reliable performance, contributing to stable production processes and lower total cost of ownership over time. For tailored technical advice or to secure supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility and delivery details Technical Data Article number: 2000832366NW Standard: DIN 2187 Product type: Extension sleeve Inner taper: MK4 Outer taper: MK4 Overall length: 265 mm Diameter D: 48 mm Usable length L1: 147.5 mm Accuracy version Fully hardened and ground inside and out For tools with Morse taper Packaging unit: 1 FAQ Is this adapter compatible with standard MK4 toolholders? Yes. The Extension sleeve DIN 2187 MK4×MK4 from TECWERK is specified with both inner and outer MK4 tapers and is intended for use with standard Morse taper tooling (SKU 2000832366NW). What benefits does the hardened and ground finish provide? The hardened and ground surfaces on this extension sleeve increase wear resistance, improve seating accuracy and reduce runout compared with untreated adapters, enhancing machining consistency. What are the key dimensions to consider when fitting this sleeve? Key dimensions are an overall length of 265 mm, an outside diameter of 48 mm, and a usable length L1 of 147.5 mm, which determine extension and clearance in the machine setup. Can the sleeve be used for heavy-duty turning and milling? The precision finish and hardened construction improve load capacity compared with non-hardened adapters; suitability for heavy-duty operations should be assessed against specific machine and tooling loads. How often should the taper seats be inspected? Regular visual inspection and light cleaning after routine use are recommended; frequency depends on operating conditions, but inspections before critical runs help maintain accuracy. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
3-16mm Precision Self-Tightening Keyless Drill Chuck B18, Hardened Components - RÖHM
Take advantage of the combination of accuracy-grade construction, self-tightening operation and hardened wear parts for reliable, high-speed drilling and sustained concentricity in production. Order the RÖHM component directly via Metav Werkzeuge or ask the consultants for compatibility advice for specific machines. RÖHM Spiro keyless drill chuck (B18, 3–16 mm clamping range) The RÖHM Spiro keyless drill chuck is an accuracy-grade, self-tightening chuck designed for high-speed and precision drilling on drill presses and drilling machines. Accuracy execution for precision work Self-tightening with constant re-tension Hardened wear parts for extended service life B18 taper, suitable for right-hand rotation Precision and reliability for production work The accuracy-grade design delivers consistent concentricity, making this chuck a dependable choice for tasks that demand tight tolerances. The combination of a 3–16 mm clamping range and a compact outer diameter of 55 mm supports versatile tooling without compromising stability. The integrated B18 taper provides a secure mounting to standard spindles, while the right-hand rotation configuration suits typical drilling stations. This results in reduced rework and a smoother workflow in serial production. Low maintenance and high operational uptime Equipped with hardened wear parts and a continuous automatic re-tension mechanism, the chuck sustains clamping force under load and at elevated speeds. The self-tightening action increases grip security during operation, lowering the risk of tool slippage and improving safety. For maintenance planning, the hardened components mean longer intervals between part replacement and predictable life cycles, which supports efficient machine scheduling and cost forecasting. Practical benefits for workshop and industrial use Compact yet robust, the chuck is tailored for precision drilling tasks on drill presses, radial drilling machines and similar equipment. The small footprint and 55 mm outer diameter allow use on machines with limited spindle clearance, while still accepting a broad range of drill shank sizes. For operations prioritising both speed and accuracy, the combination of self-tightening behaviour and hardened components provides a reliable solution that minimises downtime and maintains hole quality across batches. For tailored technical advice on the RÖHM Spiro keyless drill chuck or to arrange supply through Metav Werkzeuge from Emmerich, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to confirm machine compatibility and delivery options. Technical data Article number: 4000832071NW Product type: Keyless drill chuck Brand: RÖHM Facts Clamping range: 3–16 mm Outer diameter: 55 mm Mounting: B18 Rotation direction: Right-hand Packaging unit: 1 Special features Accuracy execution Self-tightening (constant automatic re-tension) All wear parts hardened Suitable for high speeds and precision drilling Tapered mounting for secure spindle fit FAQ What clamping range does the chuck cover? The RÖHM Spiro keyless drill chuck accepts tools from 3 to 16 mm and is suitable for a wide range of standard drill shanks. Is the chuck suitable for high-speed drilling? Yes, the design includes hardened wear parts and continual self-tensioning, which makes the chuck appropriate for higher spindle speeds and precision tasks. Which spindle mount does the chuck use? The chuck features a B18 taper mounting for secure attachment to compatible spindles. How does the self-tightening feature benefit production? Self-tightening ensures the clamping force increases under rotation, improving grip security and reducing the likelihood of slippage during automated or manual drilling operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3-16mm Quick-Change Drill Chuck Heavy-Duty B16 Taper, Self-Clamping, Right-Hand - RÖHM
Robust, heavy‑duty construction combined with a self‑tightening mechanism and a B16 taper ensures consistently secure clamping for stationary drilling operations; order direct via Metav Werkzeuge or request specialist advice if required. Supra keyless drill chuck – heavy‑duty, B16 taper, 3–16 mm clamping range (RÖHM) Supra keyless drill chuck is a heavy‑duty, self‑tightening quick‑change chuck designed for stationary machines with a B16 taper and a 3–16 mm clamping range. Heavy‑duty industrial design Self‑tightening for secure clamping B16 taper for stationary machines Clamping range 3–16 mm High throughput and reliable performance for production use The Supra keyless drill chuck combines a heavy‑duty build with a self‑tightening clamping principle to deliver reliable performance in repetitive drilling tasks. The self‑tightening action increases grip force under right‑hand rotation, reducing the risk of slippage during heavy cuts. With a 3–16 mm clamping range, the chuck supports a broad selection of standard drill bits, enabling efficient tool changes without compromising on stability — a clear advantage for production environments where uptime and consistent results matter. Faster tool changes and less downtime on the shop floor A keyless, quick‑change design eliminates the need for a chuck key, allowing operators to swap drill bits rapidly and maintain workflow continuity. The B16 taper mount provides secure axial and radial positioning on compatible stationary spindles, simplifying installation and alignment. For workshops handling frequent bit changes, this reduces non‑productive time and contributes to smoother process sequences. The mechanism is optimised for right‑hand rotation; this characteristic should be matched to the machine’s spindle direction for maximum clamping efficiency. Durable construction and clear compatibility information Built for industrial demands, the chuck’s heavy‑duty specification supports repetitive loads with low maintenance. The compact outer diameter of 51 mm keeps the tool profile slim while maintaining rigidity. Compatibility is straightforward: the mount is a B16 taper, and the clamping range covers 3–16 mm drill shanks, which makes integration into existing drilling stations simple. The result is a robust clamping solution that balances durability with adaptability to common workshop tooling standards. Practical benefits for workshop organisation and quality control Using a reliable quick‑change chuck reduces variation in hole quality and shortens cycle times, which directly benefits production planning and part consistency. The design supports standardised tool inventories, so fewer special adapters are needed. If questions arise about fitting the device to specific machines or optimising torque transfer for particular applications, expert guidance is available to ensure proper integration without compromising safety or accuracy. For secure, heavy‑duty drilling in stationary equipment, choose the RÖHM Supra keyless drill chuck and order via Metav Werkzeuge or request specialist advice at info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 4000832061NW SKU / UID: 4000832061NW Manufacturer: RÖHM Product type: keyless drill chuck Type: Supra Mount: B16 Facts Clamping range: 3–16 mm Outer diameter: 51 mm Packaging unit: 1 Special features Heavy‑duty industrial design Self‑tightening mechanism Mount: B16 taper Rotation: right‑hand Form: heavy industrial execution Label: Schnellspannbohrfutter Supra Spann‑D.3‑16mm B 16 f.Re‑Lauf RÖHM FAQ What clamping range does the chuck support? The chuck supports a clamping range of 3–16 mm, suitable for a wide range of standard drill shanks. Is the chuck suitable for left‑hand rotation? No, the design and self‑tightening action are optimised for right‑hand rotation only. Which spindle mount is required for installation? A B16 taper spindle mount is required; the chuck is designed for direct mounting to B16 tapers on stationary machines. What is the outer diameter of the chuck? The chuck has an outer diameter of 51 mm, offering a compact profile with high rigidity. How does the self‑tightening mechanism benefit workshop use? The self‑tightening mechanism increases gripping force under rotation, reducing slippage and improving hole quality during repetitive drilling with consistent right‑hand spindle rotation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3-16mm Quick-Change Drill Chuck MK3 Self-Clamping For Right-Hand Rotation, 56mm Diameter - ALBRECHT
Take advantage of the combination of self-tightening clamping, an integrated MK3 Morse taper and high runout accuracy for reliable, uninterrupted drilling operations; order the chuck directly via Metav Werkzeuge or consult our specialists for application advice. ALBRECHT SBF-plus quick-change drill chuck (3–16 mm, MK3, right-hand rotation) The SBF-plus quick-change drill chuck supplies self-tightening clamping with an integrated MK3 Morse taper, engineered for precise workshop and industrial drilling in right-hand rotation. Integrated MK3 Morse taper for direct mounting Self-tightening design for reliable clamping High concentricity and compact construction Clamping range 3–16 mm, outer Ø 56 mm Precision that keeps production on track The SBF-plus is designed to maintain a consistent concentricity under load, delivering measurable improvements in hole quality and tool life. Thanks to the self-tightening mechanism and compact architecture, vibration is minimised and cutting forces are transmitted more evenly. These features translate into fewer reworks and a steadier process flow, making the chuck particularly suitable where repeatable accuracy and low runout are essential for serial drilling and reaming tasks. Quick, robust mounting for fast tool changes An MK3 Morse taper is integrated into the shaft so the chuck and shank act as a single unit, simplifying spindle engagement and removal. The direct-mount concept reduces installation time compared with adaptors and keeps the connection rigid for heavy-duty cycles. With a 3–16 mm clamping range and an outer diameter of 56 mm, the unit handles a wide span of common drill sizes while retaining a compact footprint that fits into crowded toolposts and compact drill heads. Operational advantages for everyday reliability Engineered for right-hand rotation, the chuck combines ease of use with secure gripping under torque. The compact design and the fact that the chuck and mounting shank form a single assembly contribute to optimised stability and improved runout performance, which in turn reduces wear on drill bits and machine spindles. For workshop managers this means a tangible reduction in routine interruptions and clearer scheduling of maintenance windows. Built for workshops and production environments This quick-change chuck addresses the needs of machinists, toolroom staff and production engineers who demand dependable performance without excessive complexity. The robust clamping action and proven mechanical layout suit both intermittent repair work and continuous production. When paired with consistent quality control and sensible machining parameters, the unit helps to raise throughput while preserving component accuracy and surface finish standards. For ALBRECHT workshop-grade performance and ordering advice, contact Metav Werkzeuge in Emmerich for tailored recommendations and fast dispatch: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000832533NW Brand: ALBRECHT Type: SBF-plus Product: quick-change drill chuck Mount: MK3 Numbers / Core technical data Clamping range: 3–16 mm Outer diameter: 56 mm Shank: MK3 Rotation: right-hand Special features Integrated Morse taper Self-tightening clamping mechanism Compact construction for optimal stability High runout accuracy for improved hole quality Chuck and shank form a single unit Designed for right-hand rotation FAQ What clamping range does the chuck cover? The clamping range is 3–16 mm, making the ALBRECHT SBF-plus suitable for a broad spectrum of standard drill diameters. Is the mount compatible with standard taper spindles? Yes, the unit has an integrated MK3 Morse taper, allowing direct mounting into machines that accept MK3 tapers without additional adaptors. Can this chuck cope with continuous production use? The SBF-plus is engineered for robust clamping and high runout accuracy, features that support continuous workshop and light production use when operated within specified machining parameters. Does the chuck support left-hand drilling operations? This version is configured for right-hand rotation; for left-hand applications a different specification would be required. How does the compact design benefit machining results? The compact assembly reduces overhang and vibration, improving stability and extending tool life while delivering better hole quality and repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.0-16mm Crown Gear Drill Chuck B16 With Key S3, Right-Hand Rotation - RÖHM
Take advantage of a robust combination of precision and industrial strength with a keyed, hammer‑drill‑resistant chuck and a wide 3.0–16 mm clamping range for reliable performance on stationary machines; order the chuck directly via Metav Werkzeuge or consult our technical team for compatibility and delivery. Prima toothed‑ring drill chuck, 3.0–16 mm, B16, RÖHM The Prima toothed‑ring drill chuck is a heavy‑duty, keyed drill chuck for stationary machines, featuring a B16 taper and designed for right‑hand rotation to ensure secure tool holding in industrial applications Clamping range 3.0–16 mm B16 taper mount Keyed operation, key size S3 Hammer‑drill resistant heavy‑duty design Reliable mounting and compatibility for workshop drill heads The chuck uses a B16 taper, complying with standard mounting interfaces for many bench and pillar drills, which simplifies machine integration and reduces setup time. The DIN 238 taper alignment ensures consistent concentricity and stable runout when fitted correctly. For production environments where repeatable tool change and firm seating are essential, the heavy‑duty specification and keyed interface deliver the mechanical security required for sustained operation. Precise clamping across a broad diameter range With a 3.0–16 mm clamping range, the toothed‑ring chuck covers the most common drill shank sizes used in general metalworking and workshop tasks. The keyed chuck mechanism and S3 key enable high tightening torque, reducing the risk of slippage under load and improving hole quality. This mechanical design is particularly beneficial where drilling accuracy and repeatability affect downstream processes and rework rates, helping to maintain throughput and part conformity. Built for impact‑capable drilling and industrial use The construction is specified as hammer‑drill resistant, making the chuck suitable for operations where intermittent impact loads occur, while remaining optimised for stationary machines with right‑hand rotation. The robust build reduces wear and the need for frequent replacement, which in turn lowers maintenance interruptions. For workshop managers seeking dependable tooling that supports continuous production, this specification minimises unexpected downtime and supports steady output. Practical operation, maintenance and selection guidance The keyed design requires simple, routine maintenance: periodic lubrication of the gear teeth and inspection of the key engagement are sufficient to preserve performance. The toothed‑ring mechanism facilitates secure bit retention with minimal wobble, while the heavy‑duty variant supplied for stationary machines offers enhanced durability compared with lighter, hand‑held chucks. When selecting a chuck for a specific machine, confirm the B16 taper and rotation direction to ensure compatibility with the spindle and drive of the target equipment. For dependable, keyed performance choose the RÖHM Prima toothed‑ring drill chuck and contact Metav Werkzeuge for technical advice and fast delivery at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000832038NW Brand: RÖHM Product type: toothed‑ring drill chuck Core facts Clamping range: 3.0–16 mm Mount: B16 taper Key size: S 3 Rotation: right‑hand rotation Packaging unit: 1 Special features DIN 238 taper for drill‑chuck cone Hammer‑drill resistant Supplied with key Heavy industrial version for stationary machines FAQ What clamping range does the chuck offer? The RÖHM Prima toothed‑ring drill chuck offers a 3.0–16 mm clamping range (SKU 4000832038NW), covering common drill shank diameters for workshop and industrial use. Which mount is required to fit this chuck? This chuck is designed for a B16 taper mounting and follows the DIN 238 specification for the drill‑chuck cone; ensure the machine spindle accepts a B16 taper. Is the chuck suitable for impact or hammer‑drilling applications? The RÖHM Prima toothed‑ring drill chuck is specified as hammer‑drill resistant, making it appropriate for operations where impact loads may be present, particularly on stationary machines. What key size is used to tighten the chuck? Tightening is performed with a key of size S 3, which is included with the chuck and provides the torque needed for secure clamping. For which rotation direction is the chuck designed? This heavy‑duty version is configured for right‑hand rotation, intended for use on machines that run in that direction (SKU 4000832038NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Extension Sleeve MK4 to MK5 Hardened Ground, DIN 2187 - TECWERK
Take advantage of a hardened, ground construction and DIN 2187 conformity to maintain spindle accuracy while extending reach; the MT4→MT5 taper pairing and 300 mm overall length deliver reliable tool support and repeatable concentricity in metalworking applications. Order the extension sleeve directly via Metav Werkzeuge or consult the team for application advice. Morse taper extension sleeve MT4×MT5 — TECWERK, hardened and ground, DIN 2187, 300 mm The Morse taper extension sleeve MT4×MT5 provides a hardened, ground sleeve for extending Morse taper tooling, optimised for metalworking and drilling operations where increased reach and maintained accuracy are required DIN 2187 standard compliance Hardened and ground inside and out 300 mm overall length for extended reach 63 mm outer diameter for stable support Maintain machining accuracy over extended reach The hardened and precisely finished inner and outer surfaces are designed to preserve concentricity when a tool is mounted into a smaller spindle via a larger taper. Conformity with DIN 2187 ensures a standardised fit and predictable performance across compatible tooling systems. By combining a controlled MT4 outside taper with an MT5 inside taper, the sleeve reduces radial runout and vibration compared with ad hoc adapters, which helps to secure cutting performance and surface quality in everyday production. Built for industrial stability and repeatability Robust dimensions and surface treatment are the basis for long-term stability: an outer diameter of 63 mm and an overall length of 300 mm provide the mass and support needed for longer overhangs, while the L1 measurement of 182.5 mm defines the usable insertion depth. The fully hardened and ground execution resists wear at contact faces, so the adapter keeps its tolerance profile through repeated tool changes and heavy-duty cycles. This reliability benefits workshops seeking consistent, measurable results from their taper tooling. Simple integration and practical handling in the workshop The sleeve is intended for tools with a Morse taper interface and works as a direct mechanical solution to increase reach without compromising interchangeability; standard compliance allows straightforward replacement and compatibility checks. Install and remove the adapter using standard practice for Morse tapers—ensure clean, dry contact faces and verify seating to achieve optimal concentricity. For complex setups or specific material challenges, technical consultation is available to align the sleeve’s properties with the intended application. For application advice, stock availability and fast delivery from Emmerich, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TECWERK MT4×MT5 extension sleeve and compatibility with existing tooling. Technical Data Article number: 2000832367NW Label: Verlängerungshülse DIN 2187 MT4×MT5 gehärtet und geschliffen Manufacturer: TECWERK Facts Standard: DIN 2187 Overall length (L2): 300 mm Usable insertion length (L1): 182.5 mm Outer diameter (D): 63 mm Special features Hardened and ground inside and out Outside taper: MT4 (Morse taper 4) Inside taper: MT5 (Morse taper 5) For tools with Morse taper interfaces Packaging unit: 1 FAQ What standard does this extension sleeve conform to? The extension sleeve conforms to DIN 2187, ensuring standardised dimensions and fit for compatible Morse taper tooling. Can this sleeve be used with MT4 spindles and MT5 tools? Yes, the sleeve is designed with an MT4 outside taper and an MT5 inside taper to accept MT5 taper tools in MT4 applications while maintaining accuracy. What are the key dimensions to check for fitment? Relevant dimensions include the overall length 300 mm, usable insertion length 182.5 mm, and outer diameter 63 mm; these help assess reach and support for the application. Is the surface finish suitable for heavy-duty workshop use? The adapter’s fully hardened and ground surfaces are intended to resist wear and retain concentricity under frequent tool changes and industrial use. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
320mm Austreiber Halbautomatisch mit Austreiblappen Einhandbedienung, DIN 228 - TECWERK
Austreiber MK1-3 HA z.Werkzeugkegel — Austreiber, halbautomatisch Der Austreiber MK1-3 HA z.Werkzeugkegel ist ein halbautomatischer Auszieher zur schonenden und schnellen Lösung von Morsekegeln MK1–MK3 in Werkzeugspindeln, entwickelt für den täglichen Einsatz in Werkstatt und Fertigung. Halbautomatische Einhandbedienung mit Fingerschutz Geeignet für Morsekegel MK1–MK3 Löst Werkzeugkegel schonend ohne Schlag Mit Austreiblappen für einfachen Eingriff Passend für Werkzeugkegel nach DIN 228 Sichere Entnahme ohne Schlag für empfindliche Spindeln Der Austreiber MK1-3 HA z.Werkzeugkegel ermöglicht durch die Hebelbetätigung ein kraftvolles, aber kontrolliertes Lösen des Kegels, wodurch Spindel-Beschädigungen vermieden werden. Die Konstruktion sorgt dafür, dass der Kegel ohne Schlag aus der Aufnahme gezogen wird; das reduziert Stillstandzeiten und senkt das Risiko teurer Reparaturen. Anwender profitieren von konstanter Prozesssicherheit bei wiederkehrenden Wechseln von Werkzeugen. Effiziente Einhandbedienung mit integriertem Fingerschutz Die Einhandbedienung ermöglicht schnelles Arbeiten auch bei hoher Taktzahl, während der integrierte Fingerschutz die Arbeitssicherheit erhöht. Bedienvorgänge lassen sich zügig und ergonomisch durchführen, was die Prozesszeit verkürzt und gleichzeitig Ermüdung reduziert. Die halbautomatische Mechanik vereinfacht Abläufe in der Spanntechnik und macht den Austreiber ideal für Werkstätten mit hohem Werkzeugwechsel-Aufkommen. Kompatibilität und Anwendungen in der Werkstatt Das Gerät ist speziell ausgelegt für Morsekegel der Größen MK1 bis MK3 und entspricht der Norm DIN 228, wodurch die Kompatibilität zu gängigen Werkzeugkegeln sichergestellt ist. Typische Einsatzbereiche sind Fein- und Schwerbearbeitung, Fräserei und Maschinenwartung, wo schonendes Ausziehen von Spannkegeln gefordert ist. Die einfache Handhabung macht den Austreiber auch für kleine Serien und Serviceeinsätze geeignet. Schutzmechanismen und Montagevorteile Der Austreiber verfügt über Austreiblappen, die das Einsetzen und Führen beim Ausziehen vereinfachen, sowie eine Hebelmechanik, die sanften Krafteintrag gewährleistet. Diese Merkmale reduzieren die Belastung von Präzisionsflächen und verlängern die Lebensdauer von Spindel und Werkzeugkegel. Dadurch sinken Folgekosten und Wartungsintervalle werden planbarer. Empfehlung: Den Austreiber direkt bei NORDWEST / TECWERK über Metav Werkzeuge anfragen und Montageberatung per E-Mail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 einholen Produktmerkmale Artikelnummer: 4000832764NW Bezeichnung: Austreiber MK1-3 HA z.Werkzeugkegel Typ: Austreiber, halbautomatisch Norm: DIN 228 Hersteller: TECWERK Verpackungseinheit: 1 Daten Gesamtlänge: 320 Besonderheiten Halbautomatisch Für Werkzeugkegel DIN 228 Einhandbedienung mit Fingerschutz Mit Austreiblappen Löst Werkzeugkegel ohne Schlag Passend für Morsekegel MK1–MK3 FAQ Was unterscheidet diesen Austreiber von manuellen Modellen? Der Austreiber MK1-3 HA z.Werkzeugkegel von TECWERK bietet eine halbautomatische Einhandbedienung und einen integrierten Fingerschutz, wodurch das Lösen von Kegeln schneller und sicherer erfolgt als bei reinen Handwerkzeugen; Artikelnummer 4000832764NW erleichtert die Nachbestellung. Für welche Morsekegelgrößen ist das Gerät geeignet? Das Werkzeug ist kompatibel mit Morsekegeln MK1 bis MK3 und ausgelegt für den Einsatz mit Werkzeugkegeln nach DIN 228. Schützt das Gerät die Spindel vor Schäden? Ja, die Hebelmechanik sorgt für ein kontrolliertes Lösen ohne Schlag, wodurch Belastung und Verschleiß an der Spindel reduziert werden. Ist der Austreiber für den täglichen Einsatz in Werkstatt und Fertigung geeignet? Durch die robuste Mechanik, die ergonomische Einhandbedienung und die Merkmale wie Austreiblappen ist das Produkt von TECWERK für häufigen Einsatz in Werkstatt und Produktionsumgebungen ausgelegt. Wie kann technische Beratung oder Ersatzteilinformation angefragt werden? Technische Fragen und Anfragen zu Ersatzteilen können über Metav Werkzeuge gestellt werden; für den Artikel 4000832764NW stehen Ansprechpartner und technische Beratung zur Verfügung. Hersteller: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
34.3mm Drill Chuck Self-Centring, B10 Taper - Vertex
Take advantage of a self‑tightening mechanism and direct B10 taper mounting to reduce re‑set times and maintain consistent tool grip; the compact 34.3 mm body contributes to space‑efficient spindle assemblies. Order the drill chuck directly via Metav Werkzeuge or consult our specialists for application advice. Vertex 8XHSP Drill Chuck — self‑tightening, B10 taper A Vertex 8XHSP self‑tightening drill chuck engineered for reliable clamping on machines with a B10 taper, ideal for demanding workshop and industrial applications Self‑tightening mechanism for reliable clamping B10 taper for direct spindle mounting 34.3 mm external diameter for compact fit Robust design suited to workshop use Faster, more reliable clamping for continuous workflows The self‑tightening action of this chuck converts spindle torque into jaw grip, ensuring secure clamping without frequent manual retightening. This behaviour helps to reduce unplanned stops and minimises tool change overheads, which benefits batch processes and repetitive drilling tasks. With an external 34.3 mm diameter, the unit combines a compact footprint with the grip force required for stable operation, supporting consistent hole quality and predictable cycle times. Simple integration with B10‑tapered spindles for quick setup Designed around a B10 taper, the chuck offers straightforward mounting and removal on compatible spindles. The reduced setup complexity shortens changeover intervals and supports a predictable production schedule. The 8XHSP model is optimised for retrofit or new installations where space is limited but reliable axial alignment and concentricity are essential, allowing faster commissioning and less time spent on alignment checks. Durable construction for workshop environments and regular use Built to perform under repetitive loads, the chuck is specified as a practical choice for general workshop and light industrial duties. Weighing 13 kg, the unit provides mass that aids stability during drilling cycles while remaining manageable for standard tooling changes. Regular inspection and basic maintenance extend service life; the construction focuses on longevity and consistent clamp force, supporting ongoing operational reliability and reduced downtime. For reliable clamping in demanding workshops, contact Metav Werkzeuge to discuss the Vertex 8XHSP and its suitability for specific B10‑taper applications via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 11015 Model: 8XHSP GTIN: 4061905083167 ETIM: EC002125 Taper: B10 Diameter: 34.3 mm Weight: 13 kg EClass: 21020490 Facts Diameter: 34.3 mm Weight: 13 kg GTIN: 4061905083167 SKU: 11015 Special features Self‑tightening chuck B10 taper mounting Designed for workshop and industrial use Category: Vertex FAQ What machines are compatible with this chuck? This chuck fits machines and spindles that accept a B10 taper; the Vertex 8XHSP is intended for direct mounting on such spindles where compact, secure clamping is required. Is the chuck suitable for continuous production use? Yes, the self‑tightening design and robust build make the chuck suitable for repetitive drilling operations and continuous workshop use, helping to reduce re‑clamping interruptions. How heavy is the chuck and does weight affect stability? The chuck weighs 13 kg; this mass contributes to stability during drilling cycles and reduces vibration for improved hole quality. Can the chuck be used for heavy‑duty industrial applications? The chuck is designed for workshop and light industrial duties; for specialised heavy‑duty or extremely high‑speed applications, verify spindle compatibility and operational limits. How does the self‑tightening mechanism improve safety and quality? By converting spindle torque into jaw grip, the mechanism maintains consistent clamping force during operation, which reduces the likelihood of tool slippage and contributes to repeatable hole accuracy. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
34.3mm Self‑Centring Drill Chuck B12 Taper, 13kg, 8XHSP - Vertex
Take advantage of the self‑tightening clamping action and the B12 taper interface for reliable toolholding and smoother drilling cycles; order directly via Metav Werkzeuge or consult our technical team for application advice. Self-tightening drill chuck by Vertex — B12 taper, Model 8XHSP The self-tightening drill chuck (model 8XHSP) is a compact, industrial-grade toolholder designed for secure clamping on B12 taper spindles in machining centres and drill presses. Self-tightening clamping action B12 taper for spindle mount Model 8XHSP, Vertex quality 13 kg mass for enhanced stability Consistent clamping for reproducible results The self-tightening design converts spindle torque into a growing clamping force, providing secure clamping as cutting loads increase. This mechanism reduces slippage and contributes to lower radial runout compared with non‑self‑tightening holders, improving repeatability across serial operations. The result is a more reliable tool interface that supports consistent hole quality and repeatable cycle times in production settings. Compact interface and workshop compatibility Fitted to a B12 taper, this chuck suits machines that accept the small taper standard, allowing integration without spindle modification. The compact form factor makes it appropriate for confined setups and retrofit tasks where space is limited. The Model 8XHSP prioritises a straightforward mounting procedure and stable seating, simplifying tool changes while maintaining the alignment required for precision drilling. Mass and mechanical stability for demanding cycles With a mass of 13 kg, the chuck provides mechanical inertia that dampens vibration during drilling. Increased mass at the tool interface often translates into improved surface finish and extended tool life where chip evacuation and stable cutting forces matter. This stability is particularly beneficial in repetitive machining tasks, where small improvements in vibration control yield measurable gains in component tolerances. Integration in the workshop and maintenance considerations Engineered for robust use, the unit supports standard workshop routines and straightforward inspection. The compact toolholder design enables easy access for routine checks and lubrication of moving parts, helping to sustain clamping performance over time. For specification matching and spindle compatibility queries, the technical codes and model reference simplify procurement and inventory management. Contact Metav Werkzeuge for tailored advice on Vertex toolholders and to arrange supply from our Emmerich stock for rapid delivery and technical support Technical data Article number: 11017 GTIN: 4061905085604 Model: 8XHSP Type: Self-tightening drill chuck Manufacturer: Vertex Facts Weight: 13 kg Diameter: 34.3 mm eClass: 21020490 ETIM: EC002125 Special features Self-tightening mechanism B12 taper mount SKU 11017 Brand: Vertex Category: Vertex FAQ What taper does the chuck use? The chuck mounts on a B12 taper, ensuring compatibility with machines that accept this spindle interface. Is this chuck suitable for heavy‑duty drilling? The Model 8XHSP features a substantial 13 kg mass for improved stability under demanding cycles, making it suitable for repeated drilling operations where vibration control is important. How does the self‑tightening mechanism benefit machining? The self‑tightening action increases clamping force with spindle torque, reducing tool slippage and improving repeatability and hole quality during production runs. What is the manufacturer and article number for ordering? This product is supplied by Vertex and is listed as article number 11017 (SKU 11017). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
34.3mm Self‑Clamping Drill Chuck J1 Taper, 8XHSP Type - Vertex
Take advantage of the self-tightening mechanism, robust J1 taper mounting and sizeable 34.3 mm diameter for reliable clamping and stable machining; these characteristics support consistent throughput and reduced rework. Order the (self-tightening drill chuck) directly via (Metav Werkzeuge) or ask our consultants if needed. Bohrfutter 8XHSP – self-tightening drill chuck with J1 taper A self-tightening drill chuck designed for secure toolholding in industrial drilling and machining applications, mounted via a J1 taper for reliable spindle integration. Self-tightening mechanism for secure clamping J1 taper for direct spindle mounting 34.3 mm diameter specification for larger tooling Robust design with a weight of 13 kg Consistent clamping for uninterrupted production The self-tightening clamping system converts torque into an ever-tighter grip on the shank, reducing slippage under load and improving process reliability. This mechanical principle means fewer interrupted cycles and less rework, which translates directly into measurable efficiency gains on the shop floor. The robust construction supports heavy-duty operation while maintaining precision in concentricity, helping to preserve tool life and part quality over long runs. Secure mounting that matches industrial spindles A purpose-built interface is provided by the J1 taper, which ensures positive seating and repeatable alignment when the chuck is mounted to compatible spindles. The model designation 8XHSP denotes a configuration suited to industrial machining centres where secure transfer of torque is critical. The taper interface also simplifies replacement and maintenance compared with non-standard adaptors, lowering machine downtime and streamlining tooling change routines. Designed for demanding workshop environments With a stated mass of 13 kg, the assembly is engineered for stability during high-thrust drilling and roughing operations, reducing vibration and supporting tighter tolerances. The outer 34.3 mm dimension is indicative of a chuck that accommodates substantial tooling while maintaining a compact footprint, which helps integrate it into existing fixturing and collet systems. Manufactured by Vertex, the component reflects an emphasis on durability and predictable behaviour under continuous industrial use, contributing to consistent output quality. Practical maintenance and operational notes Routine inspection of the jaw contact surfaces and lubrication of the screw thread are the primary maintenance tasks to preserve clamping performance; these simple measures maintain precision and prevent premature wear. The mechanical nature of the self-tightening action reduces the need for frequent re-torquing during a shift, supporting a predictable maintenance cadence that aligns with production schedules. Replacement parts follow standard Vertex sizing, aiding spare-part logistics in larger workshops. Contact Metav Werkzeuge for tailored advice on integrating the Vertex 8XHSP self-tightening drill chuck into existing machinery and for assistance with technical specifications Technical data Article number: 11016 GTIN: 4061905085185 Manufacturer: Vertex Type: 8XHSP Taper: J1 Diameter: 34.3 mm Weight: 13 kg eClass: 21020490 ETIM: EC002125 Facts Diameter: 34.3 mm Weight: 13 kg GTIN: 4061905085185 Special features Self-tightening mechanism J1 taper mounting Industrial-grade construction SKU: 11016 FAQ What is the recommended mounting for this chuck? The Vertex 8XHSP self-tightening drill chuck is specified for direct mounting on a J1 taper spindle to ensure secure and repeatable seating. What clamping behaviour can be expected from the chuck? The chuck relies on a self-tightening mechanism that increases grip proportionally with applied torque, reducing the risk of tool slippage during high-load drilling. Is the chuck suitable for heavy-duty machining? Yes; the combination of a robust build and a mass of 13 kg gives the chuck the stability required for heavy-duty drilling and industrial applications. Which identification numbers should be quoted when ordering spare parts? Please refer to the SKU 11016 and the GTIN 4061905085185 when requesting spare parts or technical documentation for this Vertex drill chuck. Does the chuck require specific maintenance routines? Regular inspection of jaw faces and periodic lubrication of the screw thread are recommended to preserve clamping performance and concentricity. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
34mm 0.5-6.5mm Quick-Change Drill Chuck B12 Self-Clamping, High Clamping Force, Right-Hand - ALBRECHT
Take advantage of the combination of precise clamping, robust durability and straightforward maintenance for uninterrupted drilling performance; benefit from the self-clamping action, maximum clamping force and fully replaceable, case-hardened wear parts — order the unit directly via Metav Werkzeuge or consult our advisors for specification support. ALBRECHT quick-release drill chuck SBF — B12 shank, 0.5–6.5 mm clamping range The ALBRECHT quick-release drill chuck SBF is a compact, high-precision keyless chuck designed for right-hand rotation drilling tasks where run-out accuracy and sustained clamping performance are required Self-clamping, maximum clamping force Highest run-out accuracy for precision work Replaceable, case-hardened wear parts B12 taper mount for continuous loads Precision clamping for consistent machining results The ALBRECHT unit delivers a defined clamping range 0.5–6.5 mm and is engineered to keep tools concentric under load. The highest run-out accuracy reduces wobble and improves hole quality, which directly lowers rework rates and scrap. The self-clamping mechanism maintains constant grip on the tool shank, so the chuck holds even small-diameter twist drills securely. For production environments where repeatability matters, this results in measurable gains in throughput and part consistency. Built for continuous use and simple upkeep All wear parts are case-hardened, ground and replaceable, so the chuck sustains long service intervals and can be refurbished quickly on the shop floor. The combination of hardened components and solid construction yields maximum clamping force while preserving concentricity over time. Maintenance consists of routine cleaning and occasional replacement of indexed wear items; this approach reduces downtime and keeps machine utilisation high without complex overhaul work. Easy integration and dependable operation in the workshop The B12 taper mount facilitates straightforward fitting to compatible spindles and toolholders, while the design supports machines running in right-hand rotation. With an outer diameter of 34 mm, the chuck offers a compact envelope that suits small- and medium-sized machine spindles where space is limited. Its robust build makes it suitable for extended production runs and for applications requiring secure clamping of slender drill bits and similar cutting tools. Practical handling and safety considerations The quick-release action speeds tool changes compared with keyed chucks, cutting non-productive time at the machine. Because all critical components are accessible and exchangeable, in-house servicing can be performed without specialised tooling. Regular inspection of jaws and the spindle seat is recommended to preserve run-out accuracy and safe operation. The design avoids on-site demonstrations but is supplied with clear spare-part interchangeability to simplify lifecycle management. Choose the ALBRECHT quick-release chuck for reliable precision and easy serviceability — contact Metav Werkzeuge for technical clarification and swift dispatch from Emmerich to your workshop Technical Data Article number: 4120167204NW Manufacturer: ALBRECHT Product type: quick-release drill chuck SBF Mount: B12 shank Rotation: right-hand Facts Clamping range: 0.5–6.5 mm Outer diameter: 34 mm Packaging unit: 1 Special features self-clamping maximum clamping force with taper mount for high continuous load with highest run-out accuracy all wear parts case-hardened, ground and replaceable designed for right-hand rotation FAQ What is the clamping range of this chuck? The ALBRECHT quick-release drill chuck SBF has a clamping range of 0.5–6.5 mm, suitable for small-diameter twist drills and similar tools. Which mount does the chuck use and how compact is it? The unit fits a B12 shank and has an outer diameter of 34 mm, making it compact for small- to medium-sized spindles. Are spare parts available for refurbishment? Yes; the chuck’s wear parts are case-hardened, ground and designed to be replaceable to extend the service life of the ALBRECHT SBF chuck. Is the chuck suitable for continuous production use? The design — including maximum clamping force and case-hardened components — is intended for high continuous load and sustained precision in production settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
34mm Drill Chuck Self‑Centring B12 Taper, 6XHSP Type, 13kg - Vertex
Taking advantage of a combination of self-tightening clamping, a compact B12 taper and a generous 34 mm capacity delivers reliable torque transmission and fast tool changes for workshop production. Order the Vertex chuck directly via Metav Werkzeuge or contact the consultants for specification support. Bohrfutter 6XHSP – self‑tightening keyless drill chuck with B12 taper A Bohrfutter 6XHSP designed as a self‑tightening, keyless clamp for compact spindles; ideal where fast bit changes and secure clamping are required Self-tightening keyless design B12 taper for compact spindle mounting 34 mm maximum drill capacity Robust construction, weight 13 kg Consistent clamping for reliable production throughput The self‑tightening mechanism provides a direct benefit in repeatable, secure tool holding: as torque increases the clamp tightens, reducing slippage and the need for retightening. This behaviour supports higher process reliability in drilling operations and reduces downtime caused by bit movement. The result is measurable efficiency gains where cycle consistency matters, and the combination of keyless operation and positive clamping addresses both speed and safety in daily use. Compact mounting and simple integration into existing machines Thanks to the B12 taper, the chuck integrates with compact spindles and machines that require a small‑form mounting. The compact taper reduces overhang and aids concentric transfer of torque, supporting precision drilling even in confined setups. Maintenance is straightforward: routine cleaning and inspection prevent debris build‑up in the taper and jaws, ensuring continued performance. These practical advantages make the chuck suitable for both small jobbing workshops and focused production cells. Durable build for workshop environments Constructed for heavy‑use conditions, the chuck’s mass contributes to steady cutting behaviour and improved bit stability under load. The combination of robust mechanics and the self‑tightening principle helps protect cutting edges from sudden slips, extending tool life and supporting predictable results. For operators seeking dependable clamping without complex tooling, this Vertex solution balances durability with straightforward operation, supporting long service intervals and consistent outcomes. Contact Metav Werkzeuge in Emmerich to discuss the Vertex Bohrfutter 6XHSP, request additional technical details or arrange a specification check by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 17000 GTIN: 4061905096143 Type: 6XHSP Manufacturer: Vertex Facts Diameter: 34 mm Taper: B12 Weight: 13 kg ECLASS: 21020490 ETIM: EC002125 Special features Self‑tightening keyless chuck Compact mounting for small spindles Robust mechanical construction SKU: 17000 FAQ What mounting interface does this chuck use? The chuck uses a B12 taper mounting interface, allowing direct fitment to spindles that accept B12 tooling. What is the maximum drill diameter the chuck accepts? The rated clamping capacity is 34 mm, suited for a wide range of common twist drill sizes. Is the chuck keyless or does it require a key? This is a self‑tightening, keyless design that clamps automatically under torque for quick bit changes. Who is the manufacturer of this chuck? The chuck is manufactured by Vertex and is supplied under SKU 17000 for identification. How does the self‑tightening function benefit workshop processes? The self‑tightening action increases clamping force with applied torque, reducing bit slippage and improving process reliability during repetitive drilling tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
34mm Self‑Centring Drill Chuck J1 Taper, Heavy‑Duty 13kg, Type 6XHSP - Vertex
Take advantage of a self‑tightening clamping system that secures tools reliably, combined with a 34 mm capacity and a machine-compatible J1 taper for consistent alignment; order the drill chuck directly via Metav Werkzeuge or ask our consultants if needed. Vertex 6XHSP self‑tightening drill chuck – 34 mm, J1 taper A robust self‑tightening drill chuck intended for machine‑tool clamping where secure tool retention and repeatable concentricity are required. Self‑tightening mechanism 34 mm drill capacity J1 taper for machine spindles Heavy‑duty build, 13 kg mass Precision and repeatability for demanding machining The self‑tightening mechanism delivers higher clamping torque under load, which reduces slippage and maintains tool concentricity during heavy operations. This characteristic directly supports process stability and part quality, especially in serial production and workshop environments that demand predictable results. The design minimises operator adjustments and contributes to shorter set‑up times, improving throughput in machining sequences. Compatibility and mechanical fit for standard spindles With a defined J1 taper the chuck is compatible with machine spindles built to the matching taper standard, ensuring correct axial and radial positioning when mounted. The nominal 34 mm capacity gives a clear indication of the largest shank that can be held, enabling selection aligned with common drilling and reaming tool diameters. The combination of taper and capacity supports integration into conventional toolholding stacks without the need for adapters in many setups. Durable construction supports workshop reliability The substantial mass of 13 kg and the model designation 6XHSP reflect a component engineered for mechanical resilience and steady performance under cyclic loads. Robustness here translates into longer service intervals and reduced risk of premature wear affecting runout. When maintenance is required, straightforward inspection of the clamping surfaces and taper interface helps to sustain concentricity and operational safety without complex procedures. Contact Metav Werkzeuge for technical advice on integrating the Vertex 6XHSP into existing equipment and to confirm spindle compatibility and mounting recommendations Technical Data SKU: 17002 GTIN: 4061905096150 Type: 6XHSP Brand: Vertex Taper: J1 Capacity / Diameter: 34 mm Weight: 13 kg eClass: 21020490 ETIM: EC002125 Numbers / Core technical data Diameter: 34 mm Weight: 13 kg Special features / Versions Self‑tightening mechanism Machine‑tool taper mounting (J1) Heavy‑duty construction Product image available FAQ Is this chuck suitable for heavy machining operations? The Vertex 6XHSP self‑tightening drill chuck, with its heavy‑duty construction and 13 kg mass, is designed to withstand demanding machining loads while maintaining clamping force and concentricity. What is the maximum tool diameter that can be held? The chuck accepts tools up to 34 mm in diameter; this figure defines the maximum shank size for secure clamping in the Vertex 6XHSP. Which spindle taper is required for mounting? Mounting requires a J1 taper, so the spindle must match this taper to ensure correct seating and axial alignment. How does the self‑tightening feature improve process reliability? The self‑tightening action increases clamping force under torque, reducing the chance of tool slippage and helping to preserve consistent runout during machining cycles. Can the chuck be identified for ordering or replacement? Yes; the component is listed under SKU 17002 and GTIN 4061905096150, which should be quoted for precise ordering and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
34mm Self‑Holding Drill Chuck B10 - Vertex
Robust clamping and straightforward integration: the Vertex 6XHSP combines a self‑tightening mechanism with a B10 taper and a compact 34 mm diameter to deliver consistent, vibration‑resistant hold for workshop and light industrial drilling. Order the Vertex 6XHSP directly via Metav Werkzeuge or contact the consultants for specification support. Vertex 6XHSP Self‑tightening drill chuck — B10 taper, 34 mm The Vertex 6XHSP is a self‑tightening drill chuck designed for B10‑taper spindles, providing secure clamping for conventional workshop drilling and machining tasks. Self‑tightening keyless operation B10 taper for secure spindle fit 34 mm external diameter Solid 13 kg unit weight Consistent clamping for repeatable results A self‑tightening design ensures reliable clamping without the need for a key, so the tool grips more firmly as torque increases. This behaviour translates into steady runout and reduced slippage during drilling, which is particularly valuable when producing series parts or when tool wear must be minimised. The mechanism is simple in principle yet effective in practice: the chuck tightens under load, enhancing contact pressure and improving hole quality. The result is measurable improvement in process stability and fewer interrupted cycles. Quick mounting and compatibility with existing spindles The B10 taper provides a compact, standardised interface for the spindle, enabling fast integration into machines and straightforward interchangeability. As a standard taper form, B10 facilitates stable axial alignment and concentricity, which supports accurate machining even at elevated speeds. The chuck’s 34 mm outer dimension keeps the unit compact while maintaining adequate jaw travel for a variety of tool shanks. This combination of compatibility and compactness reduces downtime during changeovers and streamlines workshop logistics. Built for demanding workshop environments Durability and predictable behaviour under load are key for any clamping device used in production environments. The chuck’s construction and design prioritise vibration resistance and long service intervals, so operators benefit from fewer interruptions for re‑clamping or adjustments. The comparatively heavy assembly mass of 13 kg contributes to inertial stability, lowering susceptibility to chatter in medium‑duty drilling operations. These attributes support continuous operation and help to protect both cutters and workpieces over repeated cycles. Practical maintenance and straightforward technical terms Maintenance needs are kept minimal: routine inspection and light lubrication are typically sufficient to ensure continued performance, and worn jaws or consumables can be replaced without complex procedures. For clarity, self‑tightening means the chuck increases its clamping force under rotational load, and B10 taper refers to the standardised spindle interface that locates and secures the chuck. These practical features make the chuck suitable for workshops seeking a durable, low‑maintenance clamping solution that integrates with common tooling infrastructure. For a tailored recommendation on the Vertex 6XHSP self‑tightening drill chuck or to request a technical datasheet, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will advise on fitment and compatibility. Technical Data Article number: 17004 SKU / Type: 6XHSP GTIN: 4061905096167 ETIM: EC002125 Designation: Drill chuck (self‑tightening) Brand: Vertex Facts Diameter: 34 mm Taper: B10 Weight: 13 kg eClass: 21020490 Special features Self‑tightening (keyless) operation Standard B10 taper interface Suitable for workshop and light industrial drilling Compact external diameter for easy integration FAQ What clamping principle does this chuck use? The Vertex 6XHSP uses a self‑tightening clamping principle: the chuck increases grip under rotational torque to reduce slippage during drilling. Which spindle interface is required for installation? A B10 taper spindle is required for proper fitting and secure mounting of the 6XHSP chuck. What does the 34 mm figure refer to? The 34 mm value indicates the chuck’s external diameter, which affects installation space and compatibility with adjacent tooling. Is the chuck suitable for high‑speed drilling? The chuck is designed for stable clamping in workshop and light industrial applications; suitability for specific high‑speed operations depends on machine and tool parameters. How heavy is the chuck and why does weight matter? The unit weighs 13 kg. Increased mass contributes to inertial stability, which can reduce vibration and improve hole quality in many drilling tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
35.6mm Drill Chuck APU Self‑Tightening SK40-APU08, DIN 69871A - Vertex
Benefit from a self‑tightening APU design, standardised DIN 69871A taper and compatibility with SK40-APU08 collets (Ø0.5–8 mm) to secure tools reliably and reduce rework; order via Metav Werkzeuge or contact our consultants for specification support. Drill chuck SK-511 (APU) — self‑tightening, SK40, DIN 69871A (Vertex) A self‑tightening drill chuck, Drill chuck SK-511 (APU), engineered for SK40 taper spindles and intended for precision clamping of small-diameter tools across general workshop and production applications Self‑tightening APU design for secure clamping Compatible with SK40-APU08 collets Collet range Ø0.5–8 mm DIN 69871A taper for standard spindles Secure clamping for repeatable machining results The self‑tightening mechanism delivers consistent clamping force that simplifies tool changes while maintaining concentricity. Designed to work with SK40 collet systems, the chuck supports a collet range Ø0.5–8 mm, enabling precise mounting of drills and small cutters. This reliability reduces the need for repeat operations and contributes to stable process quality in batch and single-piece production. The chuck’s balanced design supports steady rotation, improving surface finish and extending tool life. Standardised mounting for easy integration Compliance with DIN 69871A ensures the chuck mates with common machining centres and toolholders, allowing straightforward retrofit and interchangeability. The combination of the standard taper and the SK40-APU08 collet interface simplifies machine setup and inventory management. For production planners and toolroom managers, this means fewer bespoke adapters and a predictable equipment footprint, which supports streamlined maintenance schedules and faster changeovers. Practical workshop benefits and handling Weighing approximately 1.4 kg, the unit is robust without being cumbersome, which helps during manual handling and fixture changes. The compact diameter (35.6 mm) and the proven Vertex workmanship make the chuck suitable for tight spindle noses and constrained tool magazines. The design emphasises both ergonomic handling and compatibility with existing collet inventories, so integration into daily workflows is efficient and low-friction. Built for precision, specified for professionals As a plain but essential toolholder, the chuck prioritises measurable performance: repeatable concentricity, secure clamping and standardised mounting. Those responsible for quality assurance will value the clear specification and the ability to verify performance with routine checks. Where process reliability matters, choosing a standardised, self‑tightening chuck reduces variability and supports consistent production output without requiring complex user adjustments. Contact Metav Werkzeuge for tailored advice on the Vertex SK-511 — our specialists in Emmerich assist with compatibility checks and specification choices to ensure the chuck meets the intended application Technical data Article number: SK-511 GTIN: 4061905084836 Manufacturer: Vertex Facts Weight: 1.4 kg Diameter: 35.6 mm Collet range: Ø0.5–8 mm eCl@ss: 21020490 ETIM: EC002125 Special features Self‑tightening (APU) Taper interface: DIN 69871A Collet type: SK40-APU08 FAQ Which collet sizes does the chuck support? The chuck supports collets in the range Ø0.5–8 mm, suitable for small drills and reamers. Is the spindle interface compatible with standard SK40 holders? Yes; the chuck uses the SK40-APU08 collet interface and mounts to a DIN 69871A taper. Is the clamping mechanism self‑tightening or manual? The device features a self‑tightening APU mechanism for secure and repeatable clamping. What is the weight and typical handling impact? The unit weighs 1.4 kg, offering a balance between robustness and manageable handling during tool changes. Can the chuck be used for high-precision applications? Designed for repeatable concentricity and stable clamping, the chuck is suitable for precision toolholding in toolrooms and production settings. Who manufactures the chuck and where is it sourced from? The chuck is produced by Vertex and is supplied via Metav Werkzeuge for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure, centred toolholding that keeps production running
A drill chuck is a precision toolholding device designed to grip rotating tools with cylindrical shanks, such as twist drills, countersinks or reamers, and to keep them exactly centred in the spindle axis. Available as both keyed chucks and keyless chucks, chucks are used across manual workstations and automated machining centres where consistent concentricity and repeatable clamping force are required.
How chucks work and where they make a difference
The clamping action is typically achieved by three hardened jaws that move synchronously when the chuck is closed, producing a force-fit, concentric hold on the tool shank. In shop practice a distinction is made between traditional keyed chucks, which deliver maximum holding force via a key, and modern keyless chucks, which enable fast, tool-free changes and often tighten more under increased cutting resistance. For high-speed, automated CNC work, CNC precision chucks with integrated spigot adaptors such as SK or HSK interfaces are used to maintain minimal unbalance and permit very high spindle speeds with tight runout tolerances.
Measurable benefits that improve throughput and tool life
- Reduced runout and scrap through consistent concentricity and minimal lateral displacement
- Faster set-up times when using keyless variants for rapid tool changes
- Higher holding forces with keyed chucks for heavy-duty drilling and high torque applications
- Compatibility with standard tooling (twist drills, reamers, countersinks) for versatile shop use
- Extended tool life by preventing slippage and off-axis loading that cause premature wear and breakage
Metav as the smart choice for dependable toolholding
Metav acts as a quality filter for the European market from its base in Emmerich, combining decades of expertise with a broad, dependable inventory. Backed by 48,000 customers, a range of 250,000 products and a warehouse that ensures reliable supply, Metav is presented as a pragmatic partner for procurement teams seeking consistent quality in drills, chucks and associated tooling. Other industry brands appear in the market context, but Metav’s assortment and sourcing reliability position it as a central, low-risk choice for workshop supply chains.
Technical highlights for reliable accuracy
- Clamping principle: three-jaw radial clamping
- Variants: keyed chucks; keyless chucks; CNC precision chucks with SK/HSK adaptors
- Accepted tools: twist drills, countersinks, reamers, reamers with cylindrical shank
- Performance: designed to prevent tool slippage at high torque; ensures tool runs in spindle axis
- Application: manual bench work, automated CNC centres, high-dynamic machining
Summary
A high-quality drill chuck ensures secure, concentric clamping of rotating tools and is fundamental for avoiding tool breakage, reducing scrap and maintaining dimensional accuracy across drilling operations. Choosing the right chuck type—keyed, keyless or CNC precision—directly improves productivity and tool longevity.
FAQ
What is the difference between a keyed chuck and a keyless chuck?
Keyed chucks are tightened with a key to achieve maximum holding force and are preferred for high-torque applications, whereas keyless chucks enable fast, tool-free changes and can be advantageous where rapid setup is required.
Can drill chucks be used on CNC machines with SK or HSK interfaces?
Yes. CNC precision chucks with SK or HSK adaptors are designed to be mounted on high-speed spindles, providing minimal unbalance and tight runout tolerances suitable for automated machining.
Which tool types are standard for use with a drill chuck?
Drill chucks typically accept twist drills, countersinks and reamers with cylindrical shanks; selection should match the chuck’s clamping range and the machining task.
How does a quality chuck affect tool life and process reliability?
A precision chuck keeps the tool centred in the spindle axis, prevents slippage under load and reduces off-axis forces—all factors that lower premature wear and improve the consistency of produced holes.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com