Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
50mm Corner Turning Head for 90° LOEX 1207 Indexable Inserts, M4x10 Torx T15 - Teknik Makina
Take advantage of a compact toolholder that combines 90° geometry, secure Torx clamping and compatibility with SECO LOEX 1207 indexable inserts for reliable shoulder machining and fast insert changes; order directly via Metav Werkzeuge or consult their specialists for specifications and fast dispatch from Emmerich. Corner insert head 90° for LOEX 1207 indexable inserts — Teknik Makina The corner insert head is a 90° toolholder designed for LOEX 1207 indexable inserts, engineered for precise shoulder cuts and robust steel machining. *90° geometry for precise shoulder machining *Compatible with SECO LOEX 1207 indexable inserts *22 mm shank diameter for secure mounting *M4x10 Torx clamping screw, T15 key required Consistent 90° geometry for accurate shoulder faces The 90° geometry of this toolhead ensures repeatable shoulder and face cuts, reducing set-up time and minimising secondary operations. Built for compatibility with LOEX 1207 indexable inserts, the design delivers a predictable cutting position and chip flow that benefits mid- and high-volume turning. Precision of the cutting angle is translated into consistent part tolerances, so the toolholder supports efficient production runs and fewer reworks. Secure clamping and fast indexable insert changes Clamping is executed with an M4x10 Torx screw and requires a T15 key, providing firm fixation with simple torque control. The head accepts inserts with five usable edges, allowing multiple indexing steps before replacement and extending usable life per insert. The 22 mm shank provides stable seating in the turret or holder, helping to reduce vibration and improve surface finish on workpieces when machining steel. Compact dimensions for flexible workshop use With an outer diameter of 50 mm, an overall height of 40 mm and a weight of 0.36 kg, the head is compact yet rigid — suitable where space on the turret is limited but sturdiness is required. The combination of small footprint and robust construction makes the head a pragmatic choice for general workshop and subcontracting environments that demand reliable performance without complex handling. Choose the Teknik Makina corner insert head for dependable 90° shoulder machining and contact Metav Werkzeuge for tailored advice or to arrange immediate dispatch from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T586TM Brand: Teknik Makina Product: Corner insert head for LOEX 1207 indexable inserts Compatible inserts manufacturer: SECO Facts Cutting angle: 90° Shank diameter: 22 mm Diameter: 50 mm Overall height: 40 mm Weight: 0.36 kg Number of cutting edges: 5 Special features Torx clamping screw: M4x10 Torx key size: T15 Compatible inserts: LOEX 1207 SKU: T586TM FAQ Which indexable inserts fit this head? The head is designed for LOEX 1207 indexable inserts; compatibility is specified for SECO-type LOEX 1207 inserts. What is the clamping method for insert retention? Retention is by an M4x10 Torx clamping screw; the head requires a T15 key for secure tightening. Is the head suitable for heavy-duty steel machining? The corner insert head offers a robust shank and firm clamping, making it suitable for demanding steel turning where a 90° shoulder is required. How many times can an insert be indexed? The accepted LOEX 1207 inserts provide multiple usable edges; the head accommodates inserts with five cutting edges before replacement or reconditioning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head For ADKT 1505 Indexable Inserts, 90° Cutting Angle, M4x10 Torx T15 - Teknik Makina
Take advantage of the combination of robust clamping, precise 90° cutting geometry and simple tool change for uninterrupted turning operations — order the component via Metav Werkzeuge or consult our technical team for integration advice. Eckmesserkopf T202TM — 90° corner turning head for ADKT 1505 indexable inserts (Teknik Makina) The Eckmesserkopf is a compact 90° turning head optimised for external shoulder and facing operations with ADKT 1505 indexable inserts, engineered for reliable integration into workshop and CNC tool systems. Corner head »Eckmesserkopf« for ADKT 1505 inserts 90° cutting angle for square and facing operations Ø50 mm body with 22 mm shank diameter Torx M4x10 fastening, T15 key required Accurate 90° geometry for repeatable shoulder machining The corner turning head delivers a defined 90° cutting geometry, which ensures consistent shoulder faces and square corners on turned parts. By accepting standard ADKT 1505 indexable inserts, the head provides a quick-change solution that reduces set-up time and supports predictable tool life. The design promotes a stable cutting position that reduces chatter and contributes to improved surface finish, making it suitable for batch production where dimensional repeatability is critical. Stable mounting and secure fastenings for vibration control Constructed with a compact Ø50 mm body and a 22 mm shank, the tool head offers a rigid interface to the toolholder, limiting deflection under load. The insert is retained by a Torx M4x10 screw tightened with a T15 key, ensuring a secure clamp and consistent seat pressure every change. The component’s modest mass of 0.394 kg and a total length of 45 mm facilitate rapid tool changes while maintaining the stiffness required for fine turning and facing tasks. Designed for compatibility with common inserts and systems This indexable insert head is specified for ADKT 1505 inserts and is listed as compatible with ISCAR insert types, enabling use of widely available cutting grades and geometries. The standardised insert format simplifies inventory management and makes the head a practical choice for workshops looking to harmonise tooling across multiple lathes. The head’s configuration supports straightforward conversion between roughing and finishing inserts to match material and process requirements. Practical handling that reduces downtime With a clear fastening method and compact dimensions, maintenance and insert replacement are fast and repeatable. The head features five dedicated cutting-edge positions for efficient indexing, reducing the need for spare tool bodies and lowering overall tooling costs. Its balanced design aids handling during set-up, and the standardised mounting dimensions make it straightforward to integrate into existing tool posts or turret systems without elaborate adapters. For precise corner turning with proven ADKT 1505 compatibility, contact Metav Werkzeuge GmbH for ordering and technical guidance — info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T202TM Manufacturer: Teknik Makina Core specifications Diameter: 50 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.394 kg Cutting angle: 90° Cutting edges: 5 Features & compatibility For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 Torx key T15 required 22 mm shank for standard holders FAQ What insert type does the turning head accept? The corner turning head accepts ADKT 1505 indexable inserts, offering compatibility with common chipbreaker and grade variants. Is the head compatible with ISCAR inserts? Yes, the head is listed as compatible with ISCAR insert types for ADKT 1505, enabling use of widely available cutting grades. What fastening hardware is required for insert clamping? Insert clamping uses a Torx M4x10 screw tightened with a T15 key to ensure secure and repeatable retention. What are the mount dimensions for the tool head? The tool head has a 22 mm shank diameter and a body diameter of Ø50 mm, facilitating integration into standard holders. How many indexing positions are available on the head? The component provides five cutting edges, allowing multiple indexings before insert replacement is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for ANHX 1004 Indexable Inserts, 90° Cut Angle, 22mm Shank - Teknik Makina
Take advantage of a compact, high-rigidity turning solution with a 50 mm head diameter and a 22 mm shank for stable set-ups; the 90° cutting angle ensures precise square-shoulder cuts while compatibility with ANHX 1004 indexable inserts keeps tooling costs predictable. Order directly via Metav Werkzeuge or ask our consultants for application advice. Eckmesserkopf T657TM – corner turning head, 50 mm diameter, 90° cutting angle (Teknik Makina) The Eckmesserkopf is a corner turning head for ANHX 1004 indexable inserts, engineered for precision shoulder and facing operations in turning applications 50 mm head diameter for rigid set-up 90° cutting angle for square shoulder cuts Compatible with ANHX 1004 Palbit inserts Fast clamping with M3x7 Torx screw Accurate shoulder cuts and reliable rigidity The turning head delivers a compact solution for repeatable square-shoulder machining thanks to its 50 mm head diameter and 90° cutting angle, which combine to reduce deflection during interrupted cuts. The unit’s 22 mm shank contributes to a stable clamping interface in standard toolholders, improving surface finish and dimensional consistency. Designed for indexable insert technology, the head accepts ANHX 1004 inserts, translating indexable insert benefits—fast edge changes and consistent cutting geometry—into lower process downtime and predictable tool costs. Secure clamping and straightforward insert changes A robust clamping design with the supplied M3x7 Torx screw and matching T8 key enables quick insert replacement while maintaining repeatable seat location and torque. The tool’s modest overall length of 40 mm and mass (approx. 0.347 kg) help balance the assembly, decreasing vibration at higher spindle speeds and extending insert life. Practical maintenance is supported by a simple fastener system; correct use of the Torx key ensures consistent clamping force and reduces the risk of misalignment during production. Practical benefits in production workflows Suitable for general turning and finishing tasks where square shoulders and precise depths are required, this corner turning head provides a reliable mechanical interface for Palbit-compatible indexable inserts. The presence of five cutting edges on compatible inserts (per insert specification) provides multiple resharpen-equivalent edges before replacement, delivering cost efficiency. Specified dimensions and repeatable clamping aid programming accuracy and shorten set-up times, making the head a pragmatic choice for batch production and mixed-job workshops seeking consistent results. For expert advice on integrating this Teknik Makina corner turning head into an existing toolchain or to place an order, contact Metav Werkzeuge for tailored recommendations and reliable supply from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T657TM Manufacturer: Teknik Makina Facts Head diameter: 50 mm Overall length: 40 mm Shank diameter: 22 mm Weight: 0.347 kg Cutting angle: 90° Torx key: T8 Torx screw: M3x7 Number of cutting edges: 5 Special features For ANHX 1004 indexable inserts Compatible with Palbit inserts Corner turning / square-shoulder application Compact, rigid design FAQ What insert type does this turning head accept? The turning head accepts ANHX 1004 indexable inserts; compatibility with Palbit variants is indicated for flexible tooling choices when using the T657TM corner head from Teknik Makina. What are the critical dimensions for setting up the tool? Relevant dimensions include a 50 mm head diameter, 22 mm shank diameter and 40 mm overall length for correct insertion and clamping in compatible toolholders. Which fastener and key are required for insert clamping? Clamping is achieved with an M3x7 Torx screw, tightened with a T8 Torx key to ensure secure, repeatable seat location on the T657TM head. Is the head suitable for heavy roughing or finishing? The compact, rigid design and 90° cutting angle are optimised for precise shoulder and finishing operations; suitability for heavy roughing depends on machine power, insert grade and cutting parameters. How does the head contribute to shorter set-up times? Standardised dimensions and a simple Torx clamping system allow fast insert changes and consistent positioning, reducing downtime during tool changes and enabling quicker return to production. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for APKT 1003 Indexable Inserts With Internal Coolant, 90° - Teknik Makina
Take advantage of the combination of precision engineering, integrated coolant capability and compact design for reliable shoulder machining. The 50 mm diameter head with internal coolant ensures stable cutting conditions and reduced chip build-up; order the Eckmesserkopf directly via Metav Werkzeuge or ask our consultants if needed. Eckmesserkopf (T177-1TM) – 50 mm head with internal coolant for APKT 1003 indexable inserts by Teknik Makina The Eckmesserkopf is a 90° shoulder cutting head designed for turning and facing operations, compatible with APKT 1003 indexable inserts and intended for precision components in CNC production environments. 50 mm head diameter Internal coolant channel For APKT 1003 indexable inserts 40 mm overall length Compatible with Korloy inserts Precision and process stability for shoulder turning Engineered for repeatable right‑angle cuts, this indexable insert head provides a 90° cutting angle and a compact 40 mm overall length, delivering consistent shoulder faces and reduced vibration in short overhang applications. The integrated internal coolant channel supplies cooling directly to the cutting edge, improving chip evacuation and prolonging insert life. Such features translate into predictable cycle times and fewer secondary operations when machining shoulders and steps. Fast setup and secure clamping for production use The design allows quick mounting and secure fastening: the cutting heads use a T8 Torx key and M2.5x5.5 Torx screws for reliable clamping of the insert seats. The construction supports six indexed positions where applicable, which helps to extend service intervals and reduces tool change frequency. For workshops and production lines requiring efficient tooling changeover, this head minimises downtime while maintaining machining accuracy. Compatibility and tooling strategy Designed specifically for APKT 1003 indexable inserts and optimised for compatibility with Korloy insert grades, the head integrates seamlessly into established tooling setups. Using standard insert geometries simplifies logistics and enables the selection of grades for finishing or more aggressive stock removal without altering the holder. The compact 50 mm diameter and modest mass suit machines with limited clearance or short‑reach tool posts. Practical benefits for workshop reliability Beyond machining performance, the head’s compact form and robust fastening deliver straightforward maintenance and inspection. The internal coolant reduces thermal load at the cutting zone, which contributes to dimensional stability over a production run. Where repeatable shoulders and clean part finishes are required, this tool head supports consistent quality with minimal adjustment. For ordering, technical clarification or to request matching inserts, contact Metav Werkzeuge — Manufacturer / Responsible: Teknik Cutting Tools; for assistance email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T177-1TM Manufacturer: Teknik Makina Product type: Eckmesserkopf Weight: 0.398 kg Core dimensions Diameter: 50 mm Overall length: 40 mm Cutting angle: 90° Number of cutting edges: 6 Torx screw: M2.5x5.5 Torx key: T8 Features & compatibility Internal coolant channel For APKT 1003 indexable inserts Compatible with Korloy inserts SKU: T177-1TM FAQ What insert type fits this tool head? The head accepts APKT 1003 indexable inserts; the design and seat geometry are matched for those inserts and for Korloy grades where applicable. Is there internal coolant supply? Yes, the Eckmesserkopf features an internal coolant channel that directs cutting fluid to the insert vicinity for improved chip control and tool life. Which key and screws are required for assembly? Assembly and insert clamping use a T8 Torx key and M2.5x5.5 Torx screws as supplied for the clamping system. Is the tool suitable for machines with limited overhang? The compact 50 mm diameter and 40 mm overall length make the head well suited to short‑reach applications and machines with restricted clearance. How many active cutting positions are available? The toolhead accommodates indexed inserts and provides multiple cutting edges to extend service intervals under normal operating conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for APKT 1003 Indexable Inserts, 90° Cutting Angle, M2.5x5.5 Torx Screw - Teknik Makina
Take advantage of a robust combination of precise geometry and secure clamping: the corner tool head ensures consistently square shoulders thanks to its 90° cutting angle and firm retention via the Torx M2.5×5.5 screw; compatibility with standard APKT 1003 indexable inserts keeps tooling flows simple and cost-effective. Order directly via Metav Werkzeuge or consult the Metav specialists for application matching. Eckmesserkopf T177TM — Corner tool head with 90° cutting angle for APKT 1003 indexable inserts (Teknik Makina) Eckmesserkopf T177TM is a compact corner cutting head designed for shoulder and face-turning operations with indexable inserts, offering a sturdy 22 mm shank and secure Torx clamping for industrial turning applications. 90° cutting angle for precise shoulder turning Compatible with APKT 1003 indexable inserts 22 mm toolholder shank diameter, robust fit Torx M2.5×5.5 screw with T8 key for secure clamping Consistent square shoulders and reliable cycle times The head’s defining geometry provides a 90° cutting angle, which produces exact right-angled shoulders without additional setup work; this reduces secondary operations and shortens cycle times. Thanks to the rigid 22 mm shank and a compact overall length, the toolholder delivers improved stability in the bore of a turret or live tool, so vibrations are minimised and insert life is extended. Such mechanical stability translates into fewer interruptions and a more predictable production rhythm. Simple integration with industry-standard inserts and holders Designed for use with APKT 1003 indexable inserts from mainstream manufacturers such as Korloy, the tool head fits established insert routines and inventory lists. The unit’s retention system is built around a Torx M2.5×5.5 screw operated with a T8 driver, enabling fast, repeatable insert changes and secure clamping without exotic tooling. For workshops seeking to harmonise tooling across multiple lathes, this compatibility reduces the need for specialised inserts and simplifies procurement and logistics. Compact dimensions for versatile machining positions With a 50 mm diameter, an overall length of 40 mm and a weight of 0.398 kg, the head is compact yet substantial enough for heavy engagement when indexable inserts are used for turning and facing. The relatively short projection supports close-in work and reduces overhang, which benefits finish quality and dimensional control. Fewer passes are required to reach tolerance, producing a net gain in throughput and a reduction in tool costs over time. Order the T177TM corner tool head via Metav Werkzeuge for matched tooling supply and expert application advice, or request assistance from the Metav team to confirm suitability for your turning centres Technical data Article number: T177TM Designation: Eckmesserkopf Manufacturer: Teknik Makina Weight: 0.398 kg Facts Diameter: 50 mm Overall length: 40 mm Shank diameter (mount): 22 mm Cutting angle: 90° Number of cutting edges: 6 Special features Torx screw: M2.5×5.5 Torx key size: T8 Suitable for indexable inserts: APKT 1003 Compatible insert manufacturer: Korloy FAQ Which inserts fit this corner tool head? The corner tool head T177TM is specified for use with APKT 1003 indexable inserts; inserts from Korloy in that designation series are compatible. What clamping hardware is required for insert changes? Insert retention on the T177TM is secured with a Torx M2.5×5.5 screw and requires a T8 key for tightening and release. Can this head be mounted in standard toolholders? The head has a 22 mm shank diameter suitable for holders that accept a 22 mm mount; check turret or toolpost compatibility before installation. Is the tool head suitable for close-in shoulder work? Yes — the compact 50 mm diameter and 40 mm overall length make the unit well suited to close-in shoulder and face turning with reduced overhang. How does the geometry affect cutting stability? The 90° cutting angle produces square shoulders and, combined with the robust shank and secure clamping, reduces vibration for improved finish and extended insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for APKT 1604 Indexable Inserts, 4 Edges, M4x10 Fixing - Teknik Makina
Take advantage of a compact, robust indexable head that combines precise compatibility with APKT 1604 inserts and quick, tool-assisted clamping for reliable cycle times on turning and milling operations; order via Metav Werkzeuge or contact the consultancy team for application advice. Eckmesserkopf — indexable corner tool head for APKT 1604, 50 mm diameter, 22 mm shank (Teknik Makina) The Eckmesserkopf is a compact indexable tool head designed for machining operations that require adaptable cutting geometry and secure insert clamping, suitable where APKT 1604 indexable inserts are specified For APKT 1604 indexable inserts 50 mm diameter cutting head 22 mm shank diameter Torx screw M4x10; key T15 Reliable precision for repeatable component quality The compact head is engineered to support consistent machining results by matching the APKT 1604 insert geometry with a stable mounting platform. The combination of a 50 mm diameter cutter body and a 22 mm shank provides balanced contact with the machine spindle or turret, reducing vibration and enabling repeatable surface finishes. Compatibility with established insert suppliers such as YG‑1 ensures predictable cutting performance and straightforward procurement of spare inserts. This results in fewer set-up variations and a steadier production output for small- to medium-batch work. Quick clamping and low-maintenance changeover Maintenance and insert changes are simplified through a standardised fastening concept: the head is secured with a Torx M4x10 screw operated by a T15 key, which keeps tool changes efficient and reduces non-productive time at the machine. The indexable design means inserts can be rotated or replaced without replacing the whole head, offering an economical way to restore cutting geometry. Clear mechanical interfaces and accessible fastening points support fast, safe swaps and limit downtime during shifts or tool-side maintenance. Robust construction for workshop reliability Built with a focus on everyday workshop demands, the tool head’s compact 45 mm overall length and modest mass (approx. 0.381 kg) permit secure clamping with minimal overhang. Four effective cutting positions provide versatility in approach and extend the service interval per insert. The design balances rigidity and serviceability, helping to maintain cutting consistency across runs and contributing to predictable tool-life planning. As an off‑the‑shelf solution from Teknik Makina, the component is suited to integration where a standardised, dependable cutting head is required. For application advice or to order the Teknik Makina Eckmesserkopf (SKU T767TM) with APKT 1604 compatibility, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — the Emmerich-based team will advise on fitment and delivery. Technical data Article number: T767TM Manufacturer: Teknik Makina Designation: Eckmesserkopf for APKT 1604 indexable inserts Numeric data Diameter: 50 mm Shank diameter (aufnahme): 22 mm Overall length: 45 mm Weight: 0.381 kg Cutting edges: 4 Special features Compatible with APKT 1604 indexable inserts Suitable insert supplier: YG-1 Fastening screw: M4x10 Torx Required Torx key: T15 FAQ Which insert type fits this head? The head accepts APKT 1604 indexable inserts; compatible inserts from YG‑1 are supported. What is the shank size required for mounting? Mounting requires a toolholder or turret accommodating a 22 mm shank diameter. Which fastening hardware is supplied or required? The head uses an M4x10 Torx screw, tightened with a T15 key for secure clamping. How many cutting positions are available per insert? The configuration supports four cutting edges, allowing multiple indexing positions before replacement. Is this head suitable for quick insert changes on the shop floor? Yes — the Torx M4x10 fastening and indexable insert format enable efficient, low‑effort insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head For APKT 1604 Indexable Inserts, 90° Cutting Angle, M4x10 Torx Clamp - Teknik Makina
Take advantage of a compact, purpose-built solution that combines a 90° cutting angle and a 22 mm shank for stable clamping and reproducible facing operations; order the angle tool head directly via Metav Werkzeuge or contact our advisors for tailored integration advice. Angle tool head (Eckmesserkopf) – 90° for APKT 1604 inserts by Teknik Makina Angle tool head (Eckmesserkopf) for facing and shoulder turning with APKT 1604 indexable inserts, designed for secure mounting and reliable repeatability in workshop turning applications 90° cutting angle for precise face turning Compatible with APKT 1604 indexable inserts 22 mm shank for stable clamping Secured by M4x10 Torx screw, T15 key Faster, more accurate facing with a 90° toolholder A compact toolholder with a 90° cutting angle delivers direct, square engagement for facing and shoulder operations; by using standard APKT 1604 indexable inserts the setup time is reduced and repeatability is improved. Indexable inserts allow the cutting edge to be rotated or replaced without changing the holder geometry, which maintains process stability and reduces downtime. This configuration is particularly effective where consistent shoulder quality and tight tolerances are required, combining efficiency and predictable results. Robust clamping and straightforward service for continuous runs Designed with a 22 mm shank and a head diameter of 50 mm, the unit offers a secure connection to the toolpost and good resistance to vibration. The insert is secured using an M4x10 Torx screw tightened with a T15 key, allowing quick insert changes and low-maintenance operation. The relatively short overall length of 45 mm and modest weight (~0.4 kg) contribute to low overhang and improved dynamic behaviour, which helps to extend insert life and maintain surface finish under production conditions. Seamless compatibility and practical workshop integration Built for use with APKT 1604 format inserts and optimised for brands such as Korloy, the toolhead integrates into existing turning toolsets without complex modification. The standardised insert format simplifies stocking and reduces tool management overhead. For workshops seeking dependable, repeatable cutting performance, the combination of standard insert formats and secure mechanical fixation means fast commissioning and predictable process outcomes — a practical choice for production and maintenance tasks alike. Contact Metav Werkzeuge for a personalised quote or technical clarification on the Teknik Makina Angle tool head T183TM; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T183TM Manufacturer: Teknik Makina Product: Angle tool head (Eckmesserkopf) Application note: for APKT 1604 Indexable Inserts Compatible insert manufacturer: Korloy Securing screw: M4x10 Torx key: T15 Core figures Shank diameter: 22 mm Head diameter: 50 mm Overall length: 45 mm Weight: 0.4 kg Cutting angle: 90° Number of cutting edges: 5 Special features Compatible with APKT 1604 indexable inserts Suited for Korloy inserts Secure Torx fixing for fast insert changes SKU: T183TM FAQ Which insert type fits this toolhead? The angle tool head accepts APKT 1604 indexable inserts, a common format used for facing and shoulder turning. Can Korloy inserts be used with this head? Yes; the toolhead is specified as compatible with Korloy APKT 1604 inserts. What secures the insert in place? An M4x10 Torx screw secures the insert; a T15 key is required for tightening. What are the key dimensions to check for machine compatibility? Important dimensions are the 22 mm shank, 50 mm head diameter and 45 mm overall length; these determine clamping and overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head For APKT 1705 Indexable Inserts L45mm With Internal Coolant - Teknik Makina
Combining a 50 mm diameter, internal coolant and compatibility with APKT 1705 indexable inserts, this corner turning head delivers consistent shoulder-turning performance and secure Torx clamping for repeatable results. Order the tool directly via Metav Werkzeuge or ask the consultants for application advice. Corner turning head for APKT 1705 indexable inserts — 50 mm, internal coolant (Teknik Makina) A corner turning head designed for precise shoulder turning with APKT 1705 indexable inserts, offering a compact 50 mm profile and integrated internal coolant for stable metal-cutting in production and jobbing environments 50 mm diameter for compact machining Integrated internal coolant delivery Compatible with Taegutec APKT 1705 inserts Secure Torx clamping with M4x10 screws Consistent shoulder turning and shop-floor productivity The engineered tool head provides a rigid platform for 90° shoulder operations, combining a compact 50 mm diameter with a 45 mm overall length to access tight workpieces without compromising stability. The internal coolant channel maintains cutting edge life and supports higher material removal rates by directing fluid directly to the cutting zone. This reduces heat build-up and improves tool life, which in turn lowers process interruptions and increases throughput on milling and turning centres. Precise clamping and maintenance-friendly assembly A robust clamping concept using M4x10 Torx screws and a T15 torx key ensures repeatable seating of the insert seat and straightforward maintenance. The tool head accepts APKT 1705 inserts and is optimised for compatibility with Taegutec grades, enabling quick index changes and predictable cutting geometry. Clear mechanical interfaces reduce set-up time and help maintain factory tolerances during multi-shift production. Application versatility and material suitability The indexable design with five active edges offers economical tooling for shoulder and face turning across a wide range of steels and non-ferrous alloys. The 90° cutting angle supports square shoulders and shoulder blending operations, while the compact profile makes the tool head suitable for batch production, maintenance work and demanding shop-floor tasks. Where coolant-fed machining is required, the integrated supply improves chip evacuation and finish quality. Reliability, documentation and operator guidance Manufactured by Teknik Makina and supplied via Metav Werkzeuge, this tool head is built for repetitive industrial use and incorporates recognized mechanical fastenings for traceable maintenance. The clear interface dimensions and standard T15/Torx clamping mean replacement and routine servicing follow familiar procedures. For applications requiring specific insert grades or cutting data, consult the tooling tables provided with the insert manufacturer to match speed and feed to the chosen material. For reliable shoulder-turning results with Teknik Makina’s corner turning head (SKU T552-1TM), contact Metav Werkzeuge to confirm fitment and obtain tailored recommendations: info@metav-werkzeuge.com • +49 2822 7131930. Technical data SKU: T552-1TM ECLASS: 21181015 Label: 50mm Eckmesserkopf APKT 1705 L45mm mit Innenkühlung Manufacturer: Teknik Makina Key measurements Diameter: 50 mm Overall length: 45 mm Shank bore / clamping diameter: 22 mm Weight: 0.362 kg Cutting angle: 90° Cutting edges: 5 Torx screw: M4x10 Torx key: T15 Features and compatibility Internal coolant: yes Compatible inserts: APKT 1705 Compatible insert supplier: Taegutec Product type: Corner turning head Product UID: T552-1TM FAQ What inserts fit this tool head? The corner turning head accepts APKT 1705 indexable inserts and is listed as compatible with Taegutec insert grades suitable for shoulder turning applications. Is there internal coolant and how does it improve performance? Yes, the tool head features internal coolant delivery that channels fluid to the cutting edge to reduce heat, improve chip evacuation and extend insert life during continuous machining. Which fasteners are required for assembly? Assembly and clamping use M4x10 Torx screws tightened with a T15 torx key for secure, repeatable seating of the insert pocket. Can this head be used for tight shoulder turning on small parts? The compact 50 mm diameter and 45 mm overall length make the head suitable for restricted access operations while maintaining rigidity for accurate 90° shoulder formation. What is the SKU for ordering and traceability? The tool head is supplied as SKU T552-1TM, which should be quoted when ordering or requesting technical data. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for APMT 1604 Indexable Inserts, 90° Cutting Angle, M4x10 Torx Fixing - Teknik Makina
The combination of a secure 22 mm shank, a compact Ø 50 mm head and compatibility with APMT 1604 indexable inserts delivers reliable shoulder finishing and easy tool changes; order the part directly via Metav Werkzeuge or contact our consultants for application advice. Corner cutting head T243TM – indexable tool head with 22 mm shank (Teknik Makina) The Corner cutting head T243TM is a compact tool head designed for precise shoulder turning and cornering tasks in industrial turning applications, accepting APMT 1604 indexable inserts for fast, repeatable insert changes. 22 mm shank diameter for secure clamping Suits APMT 1604 indexable inserts 90° cutting angle for shoulder operations Head Ø 50 mm; overall length 45 mm High-precision compatibility for consistent production quality The indexable inserts interface is specified for APMT 1604, providing a standardised, repeatable seating that reduces setup time and variance between tool changes. With a true 90° cutting angle, the head is optimised for shoulder cuts and square-shoulder finishing, ensuring a predictable cut geometry that simplifies downstream machining and inspection. The compatibility note with Korloy inserts clarifies supplier options for replacement inserts, supporting uninterrupted production. Robust design that improves clamping stability and handling Engineered around a 22 mm shank, the head offers a stable clamping interface that reduces vibration and improves surface finish when mounted in appropriate toolholders. The compact Ø 50 mm head and 45 mm overall length combine to keep overhang low, helping to preserve rigidity in close-tolerance operations. A lightweight construction of 0.4 kg allows easier handling during set-up, while the specified fixing screw M4x10 (Torx) and required T15 key permit secure seating of the insert and straightforward maintenance. Practical benefits for workshop and small-batch production For job shops and production cells requiring frequent tool changes, the tool head’s straightforward geometry supports rapid indexable insert swaps and predictable reconditioning intervals. The multi-edge insert seating (five cutting edges noted) extends use between replacements, lowering tooling logistics. This compact, purpose-built solution is suitable where efficient shoulder machining and consistent repeatability are priorities, offering a pragmatic balance of rigidity, accessibility and compatibility for standard turning tool platforms. Select the Teknik Makina T243TM corner cutting head for dependable shoulder finishing and contact Metav Werkzeuge for tailored advice or to arrange supply—email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: T243TM Brand: Teknik Makina Product: Corner cutting head for APMT 1604 indexable inserts SKU: T243TM Core dimensions Shank diameter: 22 mm Head diameter: 50 mm Overall length: 45 mm Weight: 0.4 kg Cutting angle: 90° Features & compatibility Compatible inserts: APMT 1604 Compatible insert manufacturer: Korloy Fixing screw specification: M4x10 (Torx) Torx key size: T15 Cutting edges: 5 FAQ Which indexable inserts fit this tool head? The T243TM corner cutting head is specified for APMT 1604 indexable inserts; Korloy inserts are noted as compatible in the technical data. What shank diameter is required for the toolholder? This head uses a 22 mm shank, so the holder or adapter must accept a 22 mm diameter shank for secure clamping. How is the insert secured to the head? The insert is restrained with a fixing screw specified as M4x10 (Torx); a T15 Torx key is required for tightening to the recommended torque. Is the T243TM suitable for shoulder and corner finishing? Yes, the T243TM’s 90° cutting angle and compact head geometry make it suitable for shoulder turning and square-shoulder finishing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head For BDMT 11T3 Indexable Inserts 90° Cutting Angle, M2.5x5.5 Torx Screw - Teknik Makina
Take advantage of precise 90° cutting performance, secure clamping on a 22 mm shank and broad compatibility with BDMT 11T3 indexable inserts for reliable workshop productivity — order the corner tool head directly via Metav Werkzeuge or consult our technical advisers for integration support Corner Tool Head T534TM — 90° holder for BDMT 11T3 indexable inserts, 22 mm shank (Teknik Makina) The Corner Tool Head T534TM is a compact 90° turning head engineered for secure face and shoulder operations with BDMT 11T3 indexable inserts in CNC and manual lathe work 90° cutting angle for precise shoulders 22 mm shank for secure clamping Compatible with BDMT 11T3 indexable inserts Torx M2.5x5.5 fastening, T8 key included Increased machining accuracy with a 90° geometry The 90° cutting angle delivers repeatable shoulder faces and square shoulders with minimal setup corrections, which shortens cycle times and reduces scrap. Built around a compact Ø50 mm head and a 22 mm shank, this toolholder provides high rigidity in confined toolposts and ensures consistent contact between the insert and workpiece. Compatibility with BDMT 11T3 indexable inserts — as supplied by Kyocera — means simple insert indexing and predictable cutting behaviour across runs, which supports process stability in small-batch and series production alike. Fast insert changes and reliable clamping reduce downtime Serviceability is addressed through a standardised Torx retaining screw: M2.5x5.5 fastening that is operated with a T8 key. The screw-driven clamping secures the insert firmly, allowing quick replacement of worn cutting edges and safe re-indexing without special tooling. Fewer stoppages for tool swaps and a low-maintenance fastening system improve effective machine availability. The head’s six cutting faces and stable mounting geometry translate into predictable tool life and easier inventory management for workshops using indexable insert systems. Compact integration for robust workshop use With an overall length of 40 mm and a mass of 0.361 kg, the holder fits tight set-ups while keeping the centre of mass close to the toolpost for reduced deflection under load. The modest footprint supports both manual turning benches and CNC turrets where space and rigidity determine surface finish and tolerance achievement. Machinists benefit from a sturdy 22 mm shank that mates with common clamping systems, while the compact head diameter helps to reach shoulders and grooves without interference — a practical choice for mixed-production environments. Contact Metav Werkzeuge for tailored advice on Teknik Makina’s Corner Tool Head T534TM and assistance with procurement or application planning from our Emmerich technical centre — info@metav-werkzeuge.com, +49 2822 7131930 Technical Data SKU: T534TM Manufacturer: Teknik Makina Product: Corner tool head for BDMT 11T3 indexable inserts Compatible inserts: BDMT 11T3 (Kyocera) Facts Shank diameter: 22 mm Head diameter: Ø50 mm Overall length: 40 mm Weight: 0.361 kg Cutting angle: 90° Number of cutting edges: 6 Fastening screw: Torx M2.5x5.5 Torx key: T8 Special features Indexable insert system compatibility Standardised Torx clamping for quick changes Compact design for tight toolpost integration Suitable for shoulder and face turning operations FAQ Which inserts fit the holder? The holder accepts BDMT 11T3 indexable inserts; the tool is specified for BDMT 11T3 inserts from Kyocera and equivalent geometries. What is the required clamping tool? A T8 Torx key is used to tighten the M2.5x5.5 Torx retaining screw supplied with the toolhead. Is the shank compatible with common toolposts? The 22 mm shank conforms to widely used clamping sizes, enabling secure mounting in standard toolposts and holders. What operations are best suited to this head? The 90° geometry and compact dimensions make it ideal for shoulder and face turning where square edges and accuracy are required. How heavy is the toolhead and does it affect rigidity? At 0.361 kg and with a short overall length, the head maintains a low overhang to improve rigidity and reduce deflection during machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Corner Turning Head For BDMT 1704 Indexable Inserts, 90° Cutting Angle, M4x10 Fixing - Teknik Makina
Robust 90° cutting geometry and a 22 mm shank deliver stable, repeatable external turning; compatibility with BDMT 1704 indexable inserts reduces tooling complexity. Order the Corner Turning Head T538TM via Metav Werkzeuge or consult the technical team for application support. Corner Turning Head T538TM by Teknik Cutting Tools — for BDMT 1704 indexable inserts, 90° cutting angle, 22 mm shank The Corner Turning Head T538TM is an external turning toolholder engineered for secure, repeatable machining with BDMT 1704 indexable inserts in standard lathe toolposts. 90° cutting geometry for precise turning 22 mm shank diameter for standard toolholders Compatible with BDMT 1704 indexable inserts Torx M4x10 fastening; T15 key Stable geometry for precision turning and repeatable results The compact toolhead offers a 90° cutting angle and a substantial Ø50 mm head diameter that together create a predictable cutting vector and excellent resistance to deflection. This stability supports consistent surface finishes and tighter tolerances when performing external turning operations. Designed for BDMT-style indexable inserts, the holder combines a rigid interface with an overall mass of 0.312 kg, which helps dampen vibration without adding unnecessary bulk. These characteristics translate into reduced scrap rates and fewer tool adjustments on the shop floor, supporting efficient batch production and quality assurance. Fast, secure insert clamping to reduce downtime Insert retention is handled via a Torx M4x10 screw secured with a T15 key, providing a compact, repeatable clamp that simplifies insert indexation and replacement. The straightforward fastening method reduces changeover time and lowers the risk of incorrect seating, which is critical for repeatability in industrial environments. Compatibility with BDMT 1704 inserts and recognition of major suppliers (Kyocera) mean that replacement inserts are widely available, keeping machine downtime to a minimum and supporting continuous production cycles. Seamless integration into common toolholding systems With a 22 mm shank and a total length of 40 mm, the turning head fits typical lathe toolposts and modular holders, enabling quick integration into existing setups without requiring special adapters. The compact dimensions allow closer centre-line approaches while the head diameter supports stable cutting when performing shoulder or profiling operations. Supplied by Teknik Cutting Tools and distributed via Metav Werkzeuge, the component is intended for machinists and maintenance teams who prioritise predictable performance and easy stocking across workshops. Contact Metav Werkzeuge for application guidance and to request the Teknik Cutting Tools Corner Turning Head T538TM — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T538TM Designation: Corner turning head (Eckmesserkopf) Manufacturer: Teknik Makina Intended inserts: BDMT 1704 indexable inserts ECLASS: 21181015 Facts Diameter: 50 mm Shank diameter (aufnahme): 22 mm Overall length: 40 mm Cutting angle: 90° Weight: 0.312 kg Cutting edges / positions: 5 Special features Compatible with Kyocera BDMT 1704 inserts Torx screw: M4x10 Torx key size: T15 SKU: T538TM FAQ Which inserts are compatible with this turning head? The Corner Turning Head T538TM is designed for BDMT 1704 indexable inserts; compatibility with Kyocera-manufactured BDMT 1704 grades is indicated in the product specification. What is the shank diameter and which toolposts will accept it? The holder has a 22 mm shank diameter and is suitable for standard modular toolposts and holders that accept 22 mm shanks. How is the insert fastened to the head? Insert clamping is achieved with a Torx M4x10 screw; a T15 key is specified for correct tightening and repeatable seating. Is the head suitable for heavy finishing and profiling work? The 90° cutting geometry and Ø50 mm head diameter provide rigidity for finishing and light to medium profiling tasks; suitability for specific materials or cutting parameters should be confirmed against the chosen insert grade. What are the physical dimensions and weight? Key dimensions: Ø50 mm head diameter, 22 mm shank, 40 mm overall length; weight is 0.312 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for BOMT 1304 Indexable Inserts With Internal Coolant, 90° Cutting Angle - Teknik Makina
Take advantage of the combination of compact design, integrated coolant and proven compatibility with BOMT 1304 indexable inserts for efficient face and shoulder turning; order the head directly via Metav Werkzeuge or consult our specialists for application advice. Indexable Corner Head T966-1TM – 50 mm diameter with internal coolant (Teknik Makina) The Indexable Corner Head T966-1TM is a compact turning head designed for BOMT 1304 indexable inserts, suited to precise face and shoulder operations where space and coolant control are decisive. 50 mm diameter for compact machining Integrated internal coolant for chip control Compatible with BOMT 1304 inserts by Ingersoll 90° cutting angle, secure M3.5 screws Precision, compactness and clear compatibility for stable production The 50 mm diameter and 40 mm overall length give a small footprint that suits confined toolpost setups and multi-spindle arrangements. This compact geometry reduces overhang while maintaining a 90° cutting angle that is advantageous for accurate shoulder and face turning where repeatable datum faces are required. Compatibility with BOMT 1304 indexable inserts, proven in many turning shops, simplifies tooling logistics and helps standardise insert inventories across machines. Improved process reliability through internal coolant and chip control An internal coolant channel provides directed cooling at the cutting zone, which improves thermal stability of the insert and reduces surface rework in medium- to high-volume turning tasks. Better coolant delivery supports consistent tool life and contributes to reduced cycle times by lowering the need for manual intervention on chip management. As a result, the head supports a more efficient production flow and fewer unplanned stoppages. Fast assembly and robust clamping for minimal downtime Assembly and insert changes are straightforward thanks to the Torx fastener system: a T10 Torx key and the M3.5x8.5 Torx screw secure the insert reliably. The head’s low mass (0.368 kg) reduces dynamic load on the turret and can help maintain runout and surface finish under interrupted cuts. Built for routine workshop handling, service and insert indexing are fast, which keeps operator time on value-added tasks rather than maintenance. Contact Metav Werkzeuge for tailored advice on using the Teknik Makina T966-1TM in specific turning applications and coolant set-ups — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T966-1TM Product type: Indexable corner head Brand: Teknik Makina Label: 50mm Eckmesserkopf BOMT 1304 L40mm mit Innenkühlung eClass: 21181015 Core technical data Diameter: 50 mm Overall length: 40 mm Weight: 0.368 kg Cutting angle: 90° Cutting edges: 5 Torx key: T10 Torx screw: M3.5x8.5 Special features Internal coolant Compatibility: BOMT 1304 indexable inserts Suitable insert manufacturer: Ingersoll FAQ Which indexable inserts fit this head? The head is designed for BOMT 1304 indexable inserts; compatibility with inserts from Ingersoll is specified for the T966-1TM. Does the tool head provide internal coolant? Yes — the T966-1TM features internal coolant, which delivers cooling to the cutting zone to support chip control and thermal stability. What machining tasks is this head best for? With its 90° cutting angle and compact dimensions, the head is optimised for face and shoulder turning where tight clearances and reproducible faces are required. Which fasteners and tools are needed for insert changes? Insert clamping uses a T10 Torx key and an M3.5x8.5 Torx screw for secure, repeatable assembly. What are the head’s main dimensions and weight? Key measurements: 50 mm diameter, 40 mm overall length and 0.368 kg mass for a low-overhang installation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for BOMT 1304 Indexable Inserts, 90° Cutting Angle, M3.5x8.5 Screw - Teknik Makina
Benefit from a compact tool head that combines a 90° cutting geometry with a standard 22 mm shank interface and secure Torx clamping — ideal for reliable corner turning with BOMT 1304 indexable inserts; order the component directly via Metav Werkzeuge or ask the consultants if specifications need verification. Corner Turning Head T966TM – 90° Cutting Angle, 22 mm Shank | Teknik Makina The Corner Turning Head T966TM is a compact insert holder designed for precision corner turning with BOMT 1304 indexable inserts in conventional lathe toolposts and turret systems. 90° cutting geometry for precise corner turning Compatible with BOMT 1304 indexable inserts 22 mm shank interface for standard toolholders Torx fastener M3.5×8.5, key T10 for secure clamping Consistent corner machining with a true 90° geometry The turning head delivers a stable 90° cutting geometry, engineered to keep corner profiles accurate across repeated cycles. The combination of a 50 mm body diameter and an overall length of 40 mm provides rigidity at the cutting point, reducing vibrations that affect surface finish and tool life. Lightweight at 0.369 kg, the component balances mass and stiffness to assist in smoother feeds and repeatable results when paired with BOMT 1304 inserts. Fast, reliable insert changes and secure clamping Designed for use with BOMT 1304 indexable inserts and compatible with Ingersoll insert ranges, the head uses a Torx M3.5×8.5 screw secured with a T10 key to ensure consistent seat pressure and repeatable seating of the insert. The 22 mm shank interface matches common toolholder bores, enabling quick mounting and minimal set-up time. Five effective cutting edges are supported on the insert arrangement, allowing economical index rotations and reduced downtime during production shifts. Practical benefits for everyday workshop use The holder’s compact form and standardised interface simplify tool management and spare-part logistics. With a familiar clamping system and industry-standard insert compatibility, the component supports efficient tool change routines and predictable machining outcomes. The robust design contributes to lower rework rates and steadier cycle times, helping workshops and production lines maintain throughput without complex recalibration. Contact Metav Werkzeuge to arrange supply from Emmerich, confirm insert compatibility for BOMT 1304 and receive technical advice on mounting and toolholder pairing Technical data Article number: T966TM Manufacturer: Teknik Makina Name: Corner Turning Head for BOMT 1304 Indexable Inserts Dimensions & weights Diameter: 50 mm Shank (interface) diameter: 22 mm Overall length: 40 mm Weight: 0.369 kg Cutting angle: 90° Number of cutting edges supported: 5 Features Compatible with BOMT 1304 indexable inserts Suitable for Ingersoll insert standards Torx screw: M3.5×8.5 Torx key size: T10 FAQ What inserts fit this turning head? The Corner Turning Head T966TM is designed for BOMT 1304 indexable inserts and is compatible with inserts following that form factor. Is the shank size suitable for standard toolholders? Yes, the holder features a 22 mm shank interface, compatible with standard toolpost and turret bores that accept a 22 mm connection. How is the insert clamped in place? Insertion and clamping are secured by a Torx M3.5×8.5 screw that requires a T10 key for tightening to ensure repeatable seating. Will this work with Ingersoll inserts? The component is specified as compatible with Ingersoll-type BOMT 1304 inserts; confirm seat geometry with the chosen insert grade. Can the head be used for both roughing and finishing? The stable 90° geometry and compact body make the head suitable for controlled corner turning applications, supporting both roughing passes and finish cuts when paired with the appropriate insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for LNGX 1307 Indexable Inserts L45mm With Internal Coolant - Teknik Makina
Take advantage of the combination of compact dimensions, reliable internal cooling and precise indexing for steady production turns; order the component directly via Metav Werkzeuge or consult our team for application advice. Corner tool head — LNGX 1307 compatibility with internal coolant Corner tool head for precision turning applications, designed to accept LNGX 1307 indexable inserts and to perform robust 90° corner operations in compact setups. 50 mm diameter head for compact turning Internal coolant for consistent cutting performance Four cutting edges, 90° cutting angle Compatible with LNGX 1307 Walter inserts Stable geometry for accurate corner turning The compact 50 mm tool geometry and a rigid body provide a stable platform for corner machining, reducing chatter and improving surface finish compared with less rigid setups. With a defined 90° cutting angle and four cutting edges, the head supports repeatable indexing and predictable wear behaviour, which helps to maintain dimensional accuracy across serial production. The lightweight design at 0.425 kg and an overall length of 45 mm keeps overhang low, reducing bending moments and enabling higher metal-removal rates without compromising tool life. Controlled cooling to extend edge life Integrated internal coolant channels supply cutting fluid directly to the insert seat, improving chip evacuation and heat control at the cutting zone. This direct cooling reduces thermal loading on the insert and prolongs edge life, which in turn decreases unplanned tool changes and machine downtime. Compatibility with LNGX 1307 indexable inserts ensures that coolant reaches the cutting edge effectively, allowing for more aggressive cutting parameters where the process demands higher throughput and consistent quality. Quick, secure fastening and straightforward service Assembly and insert clamping use a M4x11 Torx screw with a T15 drive, ensuring firm, repeatable seating and simple service procedures at the machine. The standardised Torx interface reduces the risk of screw cam‑out during tightening and facilitates rapid index‑and‑replace cycles during maintenance. Clear torque procedures and the compact 45 mm overall length help to minimise setup time and support consistent clamping force across production shifts, contributing to lower process variation. Built for industrial workflows and dependable supply Produced by Teknik Makina and specified for Walter-compatible LNGX 1307 inserts, the head integrates into established turning tool systems and tooling families. Sourcing through Metav provides access to a broad inventory and a quality filter from the Emmerich hub, supporting steady replenishment for production lines. The combination of standardised insert interfaces, internal coolant and compact dimensions makes this component suited to manufacturers seeking stable, easy-to-service corner turning solutions within multi-shift operations. Discuss application suitability and current availability with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fit for the turning centre and secure the Teknik Makina corner tool head T490-1TM Technical Data SKU: T490-1TM Label: 50mm Eckmesserkopf LNGX 1307 L45mm mit Innenkühlung Manufacturer: Teknik Makina Product: Corner tool head eClass: 21181015 Facts Diameter: 50 mm Overall length: 45 mm Weight: 0.425 kg Cutting edges: 4 Cutting angle: 90° Torx screw: M4x11 Torx key: T15 Internal coolant: Yes Special features Compatible with LNGX 1307 indexable inserts Suited for Walter-compatible inserts Internal cooling for directed coolant delivery Compact design for reduced overhang Standard Torx clamping for repeatable fastening FAQ Which insert type fits this tool head? The corner tool head accepts LNGX 1307 indexable inserts and is specified for compatibility with Walter insert geometries; the T490-1TM is designed to seat those inserts securely for corner turning operations. Is there internal coolant supply? Yes — the component features internal coolant channels to direct coolant to the cutting edge, improving chip control and edge life for the Teknik Makina corner tool head T490-1TM. What fastening hardware is required for insert clamping? Insert clamping uses a M4x11 Torx screw tightened with a T15 drive, providing a robust and serviceable connection for repeatable indexing and maintenance routines. What are the key dimensions relevant to machine setup? Key dimensions are 50 mm diameter and 45 mm overall length, with a mass of 0.425 kg, which together define the overhang and influence rigidity for setup calculations. Which cutting operations is this head optimised for? The head is optimised for 90° corner turning and related finishing or semi‑roughing operations where four cutting edges and a stable indexable interface support consistent surface quality and dimensional control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head For LNHU 1306 Indexable Inserts With Internal Coolant, 90° Cutting Angle - Teknik Makina
Take advantage of the combination of precise geometry, robust 50 mm engagement and internal coolant to keep cycle times short and tool life long; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Square turning head – 50 mm diameter, internal coolant (Teknik Makina) Square turning head for medium-duty shoulder turning and facing, designed to accept LNHU 1306 indexable inserts for reliable square-shoulder machining in production environments 50 mm diameter for sturdy engagement Internal coolant for improved chip control Compatible with LNHU 1306 indexable inserts 90° cutting angle for precise shoulder finishing Precision and rigidity for consistent square-shoulder machining The 50 mm body diameter and compact 40 mm overall length yield a stable tool assembly that resists deflection during heavy engagement. This rigidity translates into repeatable dimension control and reduced rework, especially when producing square shoulders and faces. The turning head’s design supports LNHU 1306 indexable inserts, enabling fast insert changes and predictable cutting behaviour. Reliable geometry and a firm connection to the holder reduce vibration and improve surface finish, supporting efficient machining cycles and consistent tolerances across batches. Coolant-fed cutting for longer tool life and cleaner chips Integrated internal coolant supplies cutting fluid directly to the insert edge, improving heat removal and chip evacuation at the cutting zone. Direct coolant flow reduces thermal load on the insert and workpiece, which can extend tool life and maintain cutting-edge integrity during demanding cuts. When paired with compatible indexable inserts from Walter, the coolant-fed arrangement helps maintain stable cutting temperatures and lowers the risk of built-up edge, contributing to longer service intervals and fewer unscheduled tool changes. Secure clamping, quick service and application versatility Fast, tool-friendly maintenance is supported by the standard M4x11 torx screw and T15 key interface, ensuring secure insert clamping with minimal downtime. The head presents a 90° cutting angle optimised for square-shoulder turning and facing, while the five cutting-edge configuration supports productive index rotations where applicable. Lightweight at 0.35 kg, the assembly balances stiffness with manageable handling during setup, making it suitable for series production as well as shorter-run jobs where quick changeovers and consistent results are required. For precise square-shoulder turning with internal coolant and LNHU 1306 compatibility, request a specification sheet or application recommendation from Metav Werkzeuge and let our specialists advise on the optimal toolholder setup for the job. Technical data SKU: T580-1TM Label: 50 mm square turning head LNHU 1306 L40 mm with internal coolant Manufacturer: Teknik Makina ECLASS: 21181015 Dimensions & weights Diameter: 50 mm Overall length: 40 mm Shank / bore diameter: 22 mm Weight: 0.35 kg Cutting edges: 5 Cutting angle: 90° Features & compatibility Internal coolant Compatible with LNHU 1306 indexable inserts Suitable for inserts by Walter Torx key: T15 Torx screw: M4x11 Aufnahme_mm_d: 22 FAQ Which inserts fit this turning head? The head accepts LNHU 1306 indexable inserts; the assembly T580-1TM is designed for these inserts and is compatible with inserts offered by Walter. Is the head coolant-fed? Yes, internal coolant is integrated into the head to deliver cutting fluid directly to the insert rake for improved chip control and tool life. What is the cutting angle and typical application? With a 90° cutting angle the head is optimised for square-shoulder turning and facing operations where precise right-angle shoulders are required. Which screw and key are used for insert clamping? Insert clamping is secured with an M4x11 torx screw and requires a T15 torx key for installation and removal. What are the mounting dimensions for the toolholder? The assembly features a 22 mm reception diameter and a 40 mm overall length; refer to T580-1TM for exact holder compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for LNMX 1510 Indexable Inserts L45mm Internal Coolant, 4 Cuts, 90° - Teknik Makina
Take advantage of the combination of a 50 mm diameter for increased stiffness, internal coolant for reliable chip evacuation and compatibility with LNMX 1510 indexable inserts to maintain stable turning cycles. Order the corner tool head directly via Metav Werkzeuge or consult our specialists for application advice. Corner tool head for LNMX 1510 Indexable Inserts — 50 mm, internal coolant (Teknik Makina) Corner tool head for turning applications, compatible with LNMX 1510 indexable inserts and designed for sturdy, coolant-fed machining in workshop and light-production environments 50 mm diameter cutting head Internal coolant for improved chip evacuation Compatible with LNMX 1510 inserts (Korloy) Four cutting edges, 90° cutting angle Improved rigidity for repeatable turning quality The 50 mm diameter and compact 45 mm overall length provide a rigid mounting that reduces deflection during interrupted cuts, which directly improves surface finish and dimensional repeatability. Built for stable set-ups, the insert holder delivers consistent results on short overhangs; the combination of a robust body mass (~0.375 kg) and a concise profile helps to maintain cutting parameters and minimise vibration. In production terms, enhanced stability translates to fewer rejects and less rework, supporting a more predictable machining process. Coolant-fed design that supports tool life and chip control An integrated internal coolant channel directs fluid close to the cutting edge, assisting chip evacuation and cooling the insert contact zone to reduce thermal wear. This contributes to longer insert life and steadier cutting forces, especially when using LNMX 1510 indexable inserts supplied by Korloy. The coolant-fed arrangement is particularly beneficial in semi-finishing and finishing passes where temperature control affects tolerances. Fastening is straightforward with the supplied screw dimensions (M4 x 12.5) and the specified Torx T15 drive, ensuring a secure and serviceable connection. Practical compatibility and workshop convenience Designed with four available cutting edges and a 90° cutting angle, the tool head is suited to square shoulder turning and general-purpose corner operations. The holder is compatible with standard LNMX 1510 insert geometry, enabling easy toolset standardisation across machines. Maintenance and replacement are uncomplicated: insert changes and retention checks are performed with a T15 Torx key and the M4 screw, keeping downtime to a minimum. For system planners, the compact foot-print of the head supports denser turret configurations without compromising accessibility. Discuss specific application requirements with Metav Werkzeuge or request a tailored quotation for the Teknik Cutting Tools T372-1TM corner tool head to optimise turning setups in the workshop Technical Data SKU: T372-1TM Product type: Corner tool head ECLASS: 21181015 Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 45 mm Weight: 0.375 kg Number of cutting edges: 4 Cutting angle: 90° Torx screw: M4 x 12.5 Special features Internal coolant Compatible inserts: LNMX 1510 Compatible insert manufacturer: Korloy Torx key: T15 Label: 50mm Eckmesserkopf LNMX 1510 L45mm mit Innenkühlung FAQ What inserts fit this tool head? The corner tool head accepts LNMX 1510 indexable inserts and is specified to work with inserts from Korloy, providing a reliable match for the insert geometry. Is internal coolant available and how does it help? Yes — the integrated internal coolant channel supplies fluid directly to the cutting zone, improving chip evacuation and helping to reduce insert wear on the T372-1TM. What are the key dimensions of the head? The holder has a 50 mm diameter and an overall length of 45 mm, offering a compact, rigid solution for short overhang turning operations. How is the insert fastened? Inserts are secured using an M4 x 12.5 Torx screw; the required drive is T15, which simplifies maintenance and repeatable clamping. Which cutting tasks is this head best suited to? With a 90° cutting angle and four cutting edges, the head is ideal for square shoulder turning and general-purpose corner machining where tool stability matters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head For LNMX 1510 Indexable Inserts, 90° Cutting Angle, M4x12.5 Screw - Teknik Makina
Take advantage of a compact, robust tool head that combines precise seating, quick indexable changes and clear compatibility for smoother machining workflows — order via Metav Werkzeuge or request technical advice from our consultants. Corner cutting head T372TM — holder for LNMX 1510 indexable inserts, Ø50 mm, 90° cutting angle (Teknik Makina) A Corner cutting head T372TM engineered as an indexable insert holder for accurate shoulder and profiling work in CNC turning and milling applications. For LNMX 1510 indexable inserts Ø50 mm head diameter 90° cutting angle for square operations M4x12.5 Torx screw, T15 key Stable clamping for repeatable precision cuts The tool head features a compact design that ensures reliable seating and consistent cutting geometry. The holder accepts LNMX 1510 indexable inserts, securing them with an M4x12.5 Torx screw driven with a T15 key for firm fixation. With a 22 mm shank and a balanced mass of 0.375 kg, the construction reduces vibration and helps maintain repeatability across batches. This stability translates into fewer rejects and less rework during shoulder and profiling operations. Faster setups and compatible with major insert brands Compatibility with leading insert manufacturers such as ISCAR, Korloy, LMN and YG‑1 allows straightforward procurement and fast tool changes. The four cutting edges and a 90° cutting angle support square shoulder cuts and face milling where right‑angled geometry is required. The modest 45 mm total length and a Ø50 mm head diameter make the component easy to handle and quick to integrate into existing tool turrets or milling stations, helping to reduce downtime during tool exchanges and maintain production flow. Practical versatility and clear application guidance Designed as a dedicated indexable insert holder, the head accommodates the LNMX 1510 family for a wide range of turning and light milling tasks. The four cutting edges enable multi‑position indexing of inserts, extending productive life before regrinding or replacement. The simple Torx fastener system minimises adjustment time while preserving clamping force. For workshops seeking a dependable, easy‑serviceable solution, this tool head delivers practical benefits without complicated maintenance routines. For specification matching, procurement or application support for the Teknik Makina corner cutting head T372TM, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our advisors will assist with compatibility checks and ordering. Technical data Article number: T372TM Manufacturer: Teknik Makina Suitable for: LNMX 1510 indexable inserts Brand compatibility: ISCAR, Korloy, LMN, YG‑1 Measurements Head diameter: 50 mm Shank / connection diameter: 22 mm Total length: 45 mm Weight: 0.375 kg Cutting angle: 90° Number of cutting edges: 4 Fastener: M4x12.5 Torx Torx key: T15 Special features Indexable insert holder design Four‑edge indexing for extended life Compact footprint for easy integration Suited to shoulder and profiling operations Torx clamping for secure fixation FAQ What inserts fit this tool head? The holder is designed for LNMX 1510 indexable inserts and is compatible with inserts from Teknik Makina’s listed partners such as ISCAR, Korloy, LMN and YG‑1. What are the key dimensions to check for machine compatibility? Check the 22 mm shank diameter and 45 mm total length; these dimensions determine turret or arbor fit for the T372TM tool head. How is the insert secured and changed? Inserts are clamped with an M4x12.5 Torx screw using a T15 key, providing secure fixation and quick indexable changes. Is this tool head suitable for square shoulder machining? Yes — the 90° cutting angle and four‑edge indexing make the head suitable for accurate square shoulder and profiling tasks using LNMX 1510 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for R390 18 Indexable Inserts L45mm With Internal Coolant - Teknik Makina
Compact, rigid and coolant-ready: the compact 50 mm angle tool head with internal coolant and a 90° cutting angle provides stable performance and extended insert life; order the holder directly via Metav Werkzeuge or consult the technical team for optimal insert selection and mounting advice. Angle tool head T423-1TM – 50 mm with internal coolant for R390 18 indexable inserts by Teknik Makina The Angle tool head T423-1TM is a compact turning and facing holder designed for use with R390 18 indexable inserts, delivering secure clamping and coolant-fed cutting for short overhang operations on production lathes. 50 mm compact tool head Internal coolant for chip control Fits Sandvik R390 18 inserts Secure Torx T15 clamping system Enhanced rigidity and consistent cutting results The compact 50 mm body and modest overall length of 45 mm reduce overhang for improved stiffness, which directly improves dimensional stability during turning and shoulder work. With four cutting edges, the holder allows rapid index changes to maintain productivity and reduce downtime. The 90° cutting angle makes this head particularly suited to facing and shoulder operations, where a square cutting geometry simplifies setup and programming. These characteristics contribute to predictable tool behaviour and repeatable component quality. Coolant-fed design for longer tool life Internal coolant channels ensure directed lubrication and chip evacuation at the cutting edge, lowering temperatures and helping to prevent built-up edge on the insert. The presence of internal coolant supports higher sustained cutting performance and can reduce thermal distortion of the workpiece. Coupled with the compact design, the coolant-fed feed promotes consistent surface finish and longer insert life, making the holder suitable for series production where process stability is essential. Robust clamping and straightforward maintenance The head uses a Torx T15 drive and an M4x10 Torx screw for secure insert clamping, which simplifies replacement and minimises setup time. A secure Torx T15 clamping system offers repeatable seating and tight mechanical connection to the insert seat, reducing the likelihood of movement under load. The accessible screw type and standardised fastening make routine maintenance and insert changes efficient, supporting continuous operation in busy workshops. Application focus and workshop integration Designed for cooperation with Sandvik R390 18 indexable inserts, the holder adapts readily to common turning tasks such as external profiling, facing and shoulder machining when fitted with the appropriate insert geometry and grade. The modest mass of 0.303 kg and the compact form support dynamic balancing and low inertial loads on small to medium-sized lathes. Manufactured by Teknik Makina, the component is intended as a reliable tool-room element that integrates into existing toolholding systems without extensive adaptation. Contact Metav Werkzeuge for expert guidance on insert selection and order the Teknik Makina angle tool head T423-1TM with internal coolant to optimally equip the production lathe Technical data SKU: T423-1TM Manufacturer: Teknik Makina Product type: Angle tool head Weight: 0.303 kg Facts Diameter: 50 mm Overall length: 45 mm Cutting edges: 4 Cutting angle: 90° Special features Compatible with R390 18 indexable inserts Internal coolant Torx T15 mounting drive Torx screw M4x10 Compatible insert manufacturer: Sandvik FAQ What insert type fits this tool head? The angle tool head T423-1TM is designed for use with R390 18 indexable inserts and is compatible with inserts from Sandvik as stated in the technical data. Does the holder provide coolant supply to the insert? Yes, the T423-1TM features internal coolant channels to deliver cooling and chip evacuation directly to the cutting edge for improved cutting conditions. Which screw and key are required for mounting an insert? Insert clamping uses a Torx T15 drive with an M4x10 Torx screw for secure and repeatable fastening. Is the tool head suitable for facing and shoulder machining? The 90° cutting angle and compact design make this head well suited to facing and shoulder operations when fitted with the appropriate R390 18 insert geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for R390-1704 Indexable Inserts, 90° Cutting Angle, M3.5x8.5 Torx - Teknik Makina
Take advantage of a compact, right-angled tool head that combines precise geometry and simple serviceability to keep cycle times consistent and set-up effort low; order directly via Metav Werkzeuge or consult our specialists for integration advice. Corner tool head T404TM — 90° indexable insert holder, 22 mm shank (Teknik Makina) A compact Corner tool head T404TM engineered for right-angle turning and shoulder work using R390-1704 indexable inserts, suitable for CNC lathes and turning centres 90° cutting angle for accurate shoulder machining Compatible with R390-1704 Sandvik inserts 22 mm shank for standard toolholder systems M3.5x8.5 Torx screw fixed, T15 key required Consistent right-angle performance for repeatable parts The holder’s 90° cutting angle provides a defined geometry for shoulder and profiling operations, ensuring consistent contact between insert and workpiece. With a 50 mm head diameter the assembly offers controlled stiffness that supports stable cutting forces and reduced chatter. This geometry simplifies cycle planning on turning centres and can improve first-pass yield when producing stepped shafts or grooves. Quick insert changes and low-maintenance fastening Designed for routine workshop handling, the head accepts R390-1704 indexable inserts and a M3.5x8.5 Torx screw, requiring a T15 key for secure clamping. The combination of standard screw format and common insert series reduces downtimes during regrinds or tool changes. The compact 45 mm overall length and 22 mm shank aid accessibility in tight tool posts while preserving a low system inertia for snappier tool changes. Reliable fitment and balanced handling in the toolpost Compatibility with Sandvik insert types and a practical mass of 0.591 kg make this head straightforward to integrate into established tool setups. The five cutting edges provide multiple index positions for prolonged service intervals. Supplied geometry supports predictable chip flow and repeatable set-up, which in turn lowers scrap rates and simplifies operator procedures on production lines. For reliable integration into turning centres and assured compatibility with Sandvik R390-1704 inserts, contact Metav Werkzeuge for procurement and technical advice — Metav Werkzeuge will support specification checks and delivery from its Emmerich site. Technical data Article number: T404TM Manufacturer: Teknik Makina Facts Shank diameter: 22 mm Head diameter: 50 mm Overall length: 45 mm Weight: 0.591 kg Cutting angle: 90° Number of cutting edges: 5 Compatible insert: R390-1704 Compatible insert manufacturer: Sandvik Torx screw: M3.5x8.5 Torx key: T15 eClass: 21181015 Special features Indexable insert holder for turning applications Right-angle geometry for shoulder machining Compact design for tight toolpost spaces Standardised fastening for quick servicing FAQ Which insert type fits this holder? The holder accepts R390-1704 indexable inserts, matching the Sandvik geometry specified for this tool head. What shank size is required in the toolpost? A 22 mm shank diameter is specified; the tool head is intended for holders and toolposts that accept a 22 mm mounting. Which screw and key are needed for insert clamping? Insert clamping uses a M3.5x8.5 Torx screw and requires a T15 Torx key for tightening. Is this head suitable for shoulder and profiling operations? Yes — the 90° cutting angle and compact head diameter are configured for precise shoulder turning and profiling on lathes and turning centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for SNHU 1206 Indexable Inserts, 5 Cutting Edges, M4x10 Torx T15 - Teknik Makina
Secure a compact, application-focused Corner Tool Head compatible with SNHU 1206 indexable inserts; the 50 mm head and 22 mm shank provide stable support while the insert is clamped with an M4x10 Torx screw (T15). Benefit from straightforward retrofitting in existing insert turning setups and order the Corner Tool Head directly via Metav Werkzeuge or ask our consultants if needed. Corner Tool Head for SNHU 1206 (Eckmesserkopf) — 50 mm head, 22 mm shank | Teknik Makina The Corner Tool Head is a compact indexable insert holder designed for SNHU 1206 inserts, offering a space-saving profile for turning applications and compatibility with Palbit insert geometries Compact 50 mm head diameter 22 mm shank for secure clamping Compatible with SNHU 1206 inserts (Palbit) Secured by M4x10 Torx screw, T15 key Reliable compatibility that reduces tooling complexity The head is purpose-built for SNHU 1206 indexable inserts, ensuring repeatable seating and positioning when paired with compatible insert geometries from Palbit. Use of standardised insert forms simplifies stock management and reduces tool change complexity in mixed-machine environments. The design supports predictable index changes, which leads to shorter setup times and improved process stability compared with ad-hoc holders. By aligning holder and insert standards, downtime for tool replacement is minimised and machining schedules remain more consistent. Compact geometry for stable machining performance A 50 mm head diameter combined with a 22 mm shank provides a balanced footprint for side and light external turning operations. The assembly’s overall length of 40 mm and mass of 0.305 kg contribute to a low-projection setup that reduces leverage and vibration at the cutting zone, supporting a steadier cut and improved surface finish. The component lists five cutting edges, enabling controlled indexing sequences when paired with rotating insert types; this reduces the frequency of full-tool swaps and keeps production running smoothly. Fast, secure insert retention and simple maintenance Insert fixation is handled via an M4x10 Torx screw tightened with a T15 key, offering positive clamping force and quick replacement of SNHU 1206 inserts. The straightforward retention method reduces tool change time and makes routine maintenance predictable, particularly in busy shops where rapid turnarounds are essential. Technical compatibility with common insert geometries means replacement inserts are widely available, while the compact head design eases access in tight toolpost arrangements. For specific application advice or confirmation of fitment, Metav Werkzeuge’s specialists are available to provide targeted guidance. For application guidance and to secure the Teknik Cutting Tools Corner Tool Head (SKU T617TM) for SNHU 1206 indexable inserts, contact Metav Werkzeuge’s technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: T617TM Designation: Eckmesserkopf for SNHU 1206 indexable inserts Manufacturer: Teknik Makina Dimensions & Core Data Head diameter: 50 mm Shank diameter: 22 mm Overall length: 40 mm Weight: 0.305 kg Cutting edges: 5 Special Features & Compatibility Compatible with SNHU 1206 indexable inserts Compatible insert manufacturer: Palbit Torx screw: M4x10 Torx key: T15 FAQ Is this head compatible with SNHU 1206 inserts? Yes. The Corner Tool Head is designed specifically for SNHU 1206 indexable inserts and aligns with common SNHU geometries, including those supplied by Palbit. How is the insert secured in the holder? The insert is fixed with an M4x10 Torx screw tightened with a T15 key, providing reliable clamping for normal turning operations. What are the main dimensions and weight of the tool head? The tool head has a 50 mm diameter, a 22 mm shank, an overall length of 40 mm and a weight of 0.305 kg (SKU T617TM). Which insert manufacturers are supported? This holder is compatible with SNHU 1206 inserts and has been specified to work with inserts from Palbit. What is the SKU and who manufactures the product? The SKU is T617TM and the product is supplied by Teknik Makina (Teknik Cutting Tools), distributed via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for SPMG 0904 Indexable Inserts 45mm, Internal Coolant - Teknik Makina
Take advantage of precise 90° shoulder cuts and an integrated internal coolant channel for improved tool life and chip control; the compact 50 mm diameter with L45 mm overall length ensures stable, low-vibration machining. Order or request application advice directly via Metav Werkzeuge for tailored workshop support. Corner turning head T338-1TM – 50 mm, internal coolant, for SPMG 0904 indexable inserts (Teknik Makina) The corner turning head is a coolant-fed, compact tool head designed to accommodate SPMG 0904 indexable inserts for accurate face and shoulder turning in production and maintenance workshops. 50 mm shank diameter with L45 mm length Integrated internal coolant supply Compatible with SPMG 0904 Taegutec inserts Torx T15 screw fixing, M3.5×8.5 fasteners High-precision shoulder turning with proven insert compatibility This tool head accepts SPMG 0904 indexable inserts and is specified for square shoulder work thanks to its 90° cutting angle. The design delivers consistent contact geometry, which promotes repeatable surface quality and dimensional accuracy in shoulder and face turning. Compatibility with Taegutec inserts simplifies procurement and toolset standardisation, making the holder a pragmatic choice for mixed-volume production where predictable results matter. Coolant-fed axis for improved chip control and tool life The integrated internal coolant channel supplies fluid directly to the cutting zone, aiding chip evacuation and temperature control during interrupted cuts. This feature extends insert life and reduces the risk of built-up edge, especially when machining materials that demand controlled cooling. Fastening uses a Torx T15 drive with M3.5×8.5 screws, ensuring reliable clamping torque for secure insert retention and straightforward index changes during routine maintenance. Compact design that supports stable machining and quick service With a compact 50 mm diameter and L45 mm overall length, the holder achieves a balance between rigidity and accessibility at the toolpost. The comparatively light mass of 0.239 kg contributes to lower spindle load and helps reduce vibration on smaller lathes while maintaining adequate stability on larger machines. The head is equipped for multiple cutting edges (five indexing positions), enabling economical use of each insert face and minimising downtime for replacements. SKU T338-1TM identifies the configuration for purchasing and stock control. Contact Metav Werkzeuge for application advice or to order the Teknik Makina corner turning head T338-1TM — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert guidance from a precision partner close to your workshop Technical data Article number: T338-1TM Product type: Eckmesserkopf Label: 50mm Eckmesserkopf SPMG 0904 L45mm mit Innenkühlung ECLASS: 21181015 Core specifications Diameter: 50 mm Overall length: 45 mm Weight: 0.239 kg Cutting angle: 90° Cutting edges: 5 Torx key: T15 Screw: M3.5×8.5 Features & compatibility Internal coolant: yes Compatible inserts: SPMG 0904 Compatible insert manufacturer: Taegutec Product category: Eckmesserkopf FAQ Which inserts fit this turning head? The corner turning head accepts SPMG 0904 indexable inserts; it is specified for compatibility with Taegutec inserts in this configuration. Is the coolant channel internal or external? The tool head features an internal coolant supply that delivers fluid directly to the cutting edge for improved chip control and thermal management. What drive and fasteners are used to secure the insert? Insert clamping uses a Torx T15 drive with M3.5×8.5 screws for secure, repeatable fastening of the insert. What machining tasks is the head best suited for? Designed for square shoulder and face turning, the head’s 90° cutting angle and compact geometry provide precision in finishing and profiling operations. How is the product identified for ordering and stock control? Refer to SKU T338-1TM when ordering the Teknik Makina corner turning head to ensure the correct 50 mm, internal-coolant configuration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for VCGT 1604 Indexable Inserts L52mm Internal Coolant - Teknik Makina
Benefit from the combination of rigidity, internal coolant and precise compatibility with VCGT 1604 inserts for reliable turning performance; order the Indexable corner turning head directly via Metav Werkzeuge or ask our consultants for tailored advice. Indexable corner turning head – 50 mm, internal coolant (Teknik Makina) The Indexable corner turning head is a compact, rigid toolholder designed for turning operations with VCGT 1604 indexable inserts, offering a 50 mm diameter and integrated internal coolant for improved cutting stability. 50 mm diameter for stable cutting Internal coolant for longer insert life Compatible with VCGT 1604 inserts Maximised stability and predictable results for production turning The design focuses on axial and radial stability: the 50 mm diameter and 52 mm overall length provide a stiff mounting that reduces vibration and improves surface finish. With a defined 90° cutting angle and four cutting edges, the toolhead ensures consistent indexable insert engagement and repeatable results across batches. This mechanical stability translates into fewer rejects and steadier cycle times on production turning tasks, supporting a more predictable workflow on the shopfloor. Internal coolant for controlled temperatures and longer life Integrated internal coolant channels deliver cutting fluid directly to the insert seat, improving chip evacuation and heat control at the cutting zone. Better cooling reduces thermal wear on the insert and the toolhead, which helps extend service intervals and maintain dimensional stability during long runs. The unit uses a M4x10 Torx screw secured with a T15 key for reliable clamping; the simple fastening method supports swift insert changes and routine upkeep without specialised equipment. Seamless workshop integration and compatibility Designed specifically for VCGT 1604 indexable inserts, the head offers straightforward compatibility with established carbide grades and geometries used in turning. The low mass of 0.362 kg combined with a compact footprint makes the component easy to handle during toolset changes and reduces spindle imbalance risks when correctly mounted. Supplied as SKU T500-1TM, the head is intended to fit into existing toolholder ecosystems with minimal adaptation, enabling efficient retrofitting and reduced setup times. Contact Metav Werkzeuge for personalised integration advice on the Teknik Makina Indexable corner turning head (SKU T500-1TM) and ensure reliable delivery from our Emmerich centre. Technical data Article number: T500-1TM SKU: T500-1TM Product type: Eckmesserkopf Label: 50mm Eckmesserkopf VCGT 1604 L52mm mit Innenkühlung Eclass: 21181015 UID: T500-1TM Facts Diameter: 50 mm Overall length: 52 mm Weight: 0.362 kg Cutting edges: 4 Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Special features Compatible with VCGT 1604 indexable inserts Internal coolant: yes Suitable for turning operations Number of inserts supported: 4 FAQ Which insert format fits this turning head? The head is compatible with VCGT 1604 indexable inserts and is supplied as the Teknik Makina turning head SKU T500-1TM for straightforward integration. Is internal coolant supported and what benefit does it provide? Yes, the integrated internal coolant supplies fluid directly to the cutting edge, improving chip evacuation and reducing thermal wear on inserts when using the Teknik Makina head. What are the main dimensions of the toolhead? The turning head has a 50 mm diameter and an overall length of 52 mm, dimensions that contribute to increased stiffness and stable cutting behaviour. How many cutting edges or inserts does the head accommodate? The component accepts four cutting edges, arranged for a 90° cutting angle to deliver consistent contact geometry during turning operations. Which fixing screw and key are required for insert clamping? Insert clamping uses an M4x10 Torx screw tightened with a T15 key as specified for the Teknik Makina head T500-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for WNMU 0806 Indexable Inserts L46mm With Internal Coolant - Teknik Makina
Take advantage of the combination of steady clamping, targeted coolant delivery and a compact 46 mm overall length for reliable shoulder turning in serial production; order or request application advice via Metav Werkzeuge for seamless integration into existing toolholders. Corner turning head T543-1TM — 50 mm, internal coolant (Teknik Makina) The Corner turning head T543-1TM provides a compact, coolant-fed solution for shoulder and facing operations using WNMU 0806 indexable inserts. 50 mm diameter for precise shoulder cuts Internal coolant for reliable chip evacuation Compatible with WNMU 0806 indexable inserts 90° cutting angle with three cutting edges Stable machining for repeatable shoulder faces The T543-1TM is engineered to deliver consistent geometry during shoulder turning thanks to its 50 mm diameter and rigid construction. The design reduces deflection when taking axial or radial cuts, which leads to fewer reworks and higher first-pass yield. With a 90° cutting angle and three cutting edges, the toolhead supports efficient indexable insert use and longer productivity intervals while maintaining surface finish and dimensional tolerances. Integrated coolant improves tool life and chip control An internal coolant channel directs lubricant and coolant precisely to the cutting zone, lowering thermal stress on the insert and helping to evacuate chips from the cut. This targeted cooling reduces flank wear and supports higher cutting parameters without sacrificing component quality. The toolhead secures inserts with an M5x12 Torx T20 clamp screw to ensure positive clamping and repeatable seating, simplifying insert changes and maintenance routines. Compatibility and compact installation for workshop use Designed for WNMU 0806 indexable inserts and compatible with Kyocera holders, the compact 46 mm overall length allows the head to be used in tighter setups and multi-station turrets where space is at a premium. The relatively light mass (approx. 0.362 kg) contributes to faster spindle acceleration and reduced dynamic load on the turret while preserving the stability required for accurate shoulder and face turning in both jobbing shops and small-series production. Contact Metav Werkzeuge for application advice, compatibility checks and procurement of the Teknik Makina corner turning head T543-1TM with internal coolant — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: T543-1TM Manufacturer: Teknik Makina eClass: 21181015 Product type: Corner turning head Label: 50mm Eckmesserkopf WNMU 0806 L46mm mit Innenkühlung Facts Diameter: 50 mm Overall length: 46 mm Weight: 0.362 kg Cutting edges: 3 Cutting angle: 90° Clamp screw: M5x12 Torx key: T20 Special features Internal coolant For WNMU 0806 indexable inserts Compatible insert manufacturer: Kyocera FAQ What inserts fit this turning head? The corner turning head accepts WNMU 0806 indexable inserts; compatibility has been validated for Kyocera-manufactured inserts. Is the tool suitable for high-speed finishing passes? The internal coolant and rigid geometry support higher cutting parameters and improved heat control, making the head appropriate for many finishing applications when paired with suitable inserts. How is the insert secured in the head? Inserts are clamped with an M5x12 screw tightened with a Torx T20, providing secure, repeatable seating and straightforward insert changes. Can this head be mounted in compact turrets? With a 46 mm overall length and modest mass, the head is designed for tight installations and multi-station turrets while maintaining machining stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Turning Head for WNMU 0807 Indexable Inserts With Internal Coolant, 90° - Teknik Makina
Take advantage of the combination of 50 mm diameter, internal coolant and a compact 40 mm length for stable, coolant-assisted corner turning. Order the corner tool head directly via Metav Werkzeuge or consult our advisers for integration advice. Corner tool head for WNMU 0807 – 50 mm, internal coolant | Teknik Makina A compact corner tool head designed for WNMU 0807 indexable inserts, optimised for 90° corner turning and space-saving turret setups. 50 mm body diameter for stable performance Internal coolant for reliable chip evacuation Compatible with WNMU 0807 Sumitomo inserts 90° cutting angle for precise corner turning Stable cutting geometry for reliable processes The compact corner tool head combines a 50 mm diameter body with a 40 mm overall length, delivering rigidity where it matters most. The 90° cutting angle provides a true corner geometry that reduces vibration and deflection during side and face turning, which in turn improves surface finish and repeatability. For production environments this means fewer reworks and more consistent cycle times, while the reduced overhang supports tighter tool clearances in multi-tool turrets. Coolant-fed design that protects inserts and speeds up machining Internal coolant is routed directly to the insert seat, ensuring effective cooling and chip control at the cutting edge. This internal coolant supply reduces thermal load on the insert and flank wear, extending service life and maintaining cutting performance across longer runs. The holder secures WNMU 0807 indexable inserts from Sumitomo, fastened with an M5x12 Torx screw and serviced using a T20 Torx key for straightforward maintenance and reliable clamping. The coolant-fed concept supports stable feeds and higher metal removal rates without sacrificing tool life. Seamless workshop integration and dependable identity Designed for quick installation in standard tool turrets, the head features a compact footprint that simplifies toolset planning. The unit is supplied under Teknik Makina with SKU T296TM and is classified under eClass 21181015, making procurement and inventory tracking straightforward. The robust fastening and coolant provision reduce downtime for changeover and maintenance, while the proven geometry supports repeatable performance across serial production. For operations aiming to increase throughput without compromising accuracy, this holder provides a pragmatic balance of rigidity and coolant efficiency. For coolant-fed corner turning with assured compatibility contact Metav Werkzeuge for procurement and expert advice from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: T296TM Brand: Teknik Makina eClass: 21181015 Dimensions & core data Diameter: 50 mm Overall length: 40 mm Cutting angle: 90° Cutting edges: 5 Torx key: T20 Torx screw: M5x12 Features & compatibility Internal coolant For WNMU 0807 indexable inserts Compatible with Sumitomo inserts Product type: Corner tool head (Eckmesserkopf) Label: 50mm Eckmesserkopf WNMU 0807 L40mm mit Innenkühlung FAQ What inserts fit this corner tool head? The corner tool head accepts WNMU 0807 indexable inserts and is specified as compatible with Sumitomo inserts for secure seating and repeatable cutting performance. How does the internal coolant affect tool life? The internal coolant channel reduces cutting temperature and improves chip evacuation, which in practice extends insert life and stabilises the machining process for the corner tool head. Which fastener and key are required for insert clamping? Insert clamping uses an M5x12 Torx screw tightened with a T20 Torx key to ensure consistent and secure fixing of the WNMU 0807 insert. Is the head suitable for confined turret spaces? Yes, the compact 40 mm overall length and 50 mm body diameter are designed to minimise overhang and allow installation in confined turret arrangements while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com