Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
40mm Round Insert Milling Cutter For RDMT 12T3 Indexable Inserts, 4 Cuts, 16mm Shank - Teknik Makina
Take advantage of a compact, high-performance solution with a Ø40 mm cutting diameter and 4 cutting edges that keeps cycle times low and tool changes efficient; order this indexable round milling cutter via Metav Werkzeuge or contact the consultants for technical guidance. Indexable round milling cutter – Ø40 mm, 4 cutting edges by Teknik Makina The Indexable round milling cutter is a compact, indexable tool designed for medium-duty milling with RDMT 12T3 inserts, suited to general workshop and light production environments Ø40 mm cutting diameter, 4 cutting edges Compatible with RDMT 12T3 indexable inserts 16 mm shank for secure toolholder fit Torx T15 clamping with M3.5x8.5 screws Reliable throughput from a compact design The cutter has been engineered to maintain steady productivity in confined setups. With a Ø40 mm diameter and 4 cutting edges, the tool offers balanced material removal while reducing vibration compared with single-edge alternatives. The combination of compact dimensions and multiple cutting edges results in shorter machining cycles and consistent chip evacuation, which translates into improved production throughput and less time spent on secondary operations. The slim profile is particularly advantageous where spindle clearance or compact fixtures limit tool choice. Secure clamping for repeatable accuracy A focus on clamping integrity ensures repeatable results part after part. The head is retained with a M3.5 locking screw and a Torx M3.5x8.5 fastening bolt, tightened using a T15 key, providing secure insert fixation and straightforward maintenance. This arrangement reduces the risk of insert movement under load, so concentricity and surface finish remain stable across batches. Clear, standardised fastening parts make replacement and workshop servicing quick and reliable. Broad compatibility with industry-standard inserts Designed for use with RDMT 12T3 indexable inserts, the cutter offers flexibility across common grades and geometries. The indexable system enables rapid edge changes without regrinding, lowering running costs and downtime. Where different materials demand different insert grades, the cutter accepts established insert sizes, allowing compatibility with existing inventory and simplifying tool management across the shop floor. Compact shank and handling benefits With a 16 mm shank and a measured weight of 0.236 kg, the tool combines rigidity with easy handling during setup. The reduced mass helps to limit centrifugal forces at moderate spindle speeds while the standard shank diameter supports secure seating in collets and toolholders. These characteristics help to preserve spindle bearings and maintain concentric performance over prolonged use, contributing to cost-effective operation and predictable machining results. Contact Metav Werkzeuge for availability and detailed technical advice on the Teknik Makina indexable round milling cutter (SKU T281TM) — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T281TM Brand: Teknik Makina Designation: Indexable round milling cutter for RDMT 12T3 inserts ECLASS: 21180902 ETIM: EC011860 Facts Diameter: 40 mm Cutting edges: 4 Overall length: 40 mm Shank diameter: 16 mm Weight: 0.236 kg Special features Compatible with RDMT 12T3 indexable inserts Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 SKU: T281TM FAQ What insert type does this cutter use? The tool is compatible with RDMT 12T3 indexable inserts; the cutter accepts standard insert geometries for flexible application. Is the cutter suitable for production runs? Yes, the indexable round milling cutter from Teknik Makina (SKU T281TM) is designed for repeatable performance in light to medium production due to its multiple cutting edges and secure clamping system. What are the shank and overall dimensions? The cutter features a 16 mm shank and an overall length of 40 mm, making it suitable for compact toolholder set-ups. Which fastening parts are required for insert clamping? Clamping uses a M3.5 locking screw and a M3.5x8.5 Torx screw, tightened with a T15 key, ensuring consistent insert retention. What typical applications suit this cutter? The tool is well suited to face milling, light profile work and semi-finishing operations where RDMT 12T3 inserts provide the required edge geometry and wear properties. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Round Insert Milling Cutter for RHKW 0802 Indexable Inserts, 4 Teeth, 16mm Shank - Teknik Makina
Take advantage of precise compatibility with RHKW 0802 indexable inserts, a compact 40 mm diameter and a secure 16 mm shank for consistent steelworking performance; order the round insert milling cutter directly via Metav Werkzeuge or consult the specialists for application advice Round insert milling cutter (Rundplattenfräser) — 40 mm diameter, 16 mm shank (Teknik Cutting Tools) The round insert milling cutter (for RHKW 0802 indexable inserts) is engineered for compact, reliable steelworking and straightforward insert changes in production and workshop environments Compatible with RHKW 0802 indexable inserts 40 mm diameter for compact milling 16 mm shank for secure collet mounting Includes M3.5 clamp screw, M3x7 Torx screw and T15 key Reduce tooling variety while keeping machining performance high The combination of compatibility with RHKW 0802 indexable inserts and a compact 40 mm cutter diameter simplifies tooling logistics and lowers per-part costs through replaceable cutting edges. Using indexable inserts enables continued cutting performance without replacing the whole tool body, which translates into predictable tool costs and shorter spindle downtime. The cutter’s four cutting edges ensure continuous chip removal and a balanced cut pattern, which supports consistent surface finish and repeatability in batch production. Fast insert changes and dependable clamping to cut downtime Reliable clamping is central to quick tool service and repeatable results. This cutter is supplied with an M3.5 clamp screw and an M3x7 Torx screw, with a T15 Torx key for secure and rapid insert replacement. The 16 mm shank provides a secure interface with standard collets, reducing runout and vibration. At 0.247 kg and an overall length of 40 mm, the tool offers a compact mass that aids tool balance and handling during changeovers, helping to keep machine uptime high on busy production floors. Built for steelworking with industry-standard compatibility Designed with steelworking applications in mind, the tool accepts Ingersoll-compatible indexable plates and fits into existing setups that use RHKW 0802 inserts. The compact form factor and robust mounting allow access in tighter spaces while maintaining effective material removal rates. For workshops and manufacturing lines aiming to streamline inventory and maintain consistent quality, this cutter offers a practical blend of accessibility, proven insert technology and mechanical stability. For technical advice on Teknik Cutting Tools' round insert milling cutter (RHKW 0802) and assistance selecting the correct inserts and clamping configuration, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: T599TM Manufacturer: Teknik Makina Suitable for indexable inserts: RHKW 0802 Compatible insert manufacturer: Ingersoll ECLASS: 21180902 ETIM: EC011860 Dimensions & mass Diameter: 40 mm Cutting edges: 4 Shank diameter: 16 mm Overall length: 40 mm Weight: 0.247 kg Clamping & accessories M3.5 clamp screw M3x7 Torx screw Torx key T15 For RHKW 0802 indexable inserts Suited to steelworking FAQ Which inserts fit this cutter? The cutter is designed for RHKW 0802 indexable inserts; Teknik Cutting Tools’ round insert milling cutter (SKU T599TM) accepts those plates and is compatible with Ingersoll-style inserts. Can the cutter be used in confined workspaces? Yes, the 40 mm diameter and 40 mm overall length make this cutter suitable for tighter access situations where a compact tool body is needed. What clamping hardware is supplied? The tool comes with an M3.5 clamp screw, an M3x7 Torx screw and a T15 Torx key to ensure secure and quick insert changes for the round insert milling cutter. Is the shank suitable for standard collets? The 16 mm shank is intended for standard collet systems and provides a secure mounting for repeatable machining results with the T599TM cutter. Which applications is this cutter optimised for? This cutter is optimised for steelworking operations using indexable inserts; it offers reliable handling, quick insert changes and is appropriate for workshop and production use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm Round Insert Milling Cutter for RHKW 1003 Indexable Inserts, 4-Flute, 16mm Shank - Teknik Makina
Take advantage of a compact, purpose-built cutter that combines reliable clamping, a Ø 40 mm cutting diameter and 4 cutting edges for efficient material removal; order directly via Metav Werkzeuge or contact the consultants for matching inserts and tool holders. Round Insert Cutter T602TM – 40 mm diameter, 4 cutting edges (Teknik Makina) The Round Insert Cutter T602TM is a compact milling head designed for indexable insert applications, optimised for medium-duty material removal with the RHKW 1003 insert family Compatible with RHKW 1003 inserts Ø 40 mm cutting diameter 4 cutting edges for steady material removal 16 mm shank for secure clamping Faster cycle times through efficient cutter geometry The tooling geometry of this round insert cutter focuses on reliable material removal and stable cutting conditions. With a Ø 40 mm diameter and 4 cutting edges, the tool spreads cutting forces across multiple flutes, reducing vibration and enabling higher feed per tooth without compromising surface quality. For production environments this translates into improved throughput and predictable cycle times, which supports tighter scheduling and consistent output. Robust clamping and quick insert changes Secure clamping is ensured by the combination of a 16 mm shank and a dedicated clamping arrangement. The insert is fixed with a M3,5 clamping screw and an additional M4x10 Torx screw tightened using a T15 key, which provides repeatable seating and simple maintenance. The clamping design reduces the risk of insert movement under load and allows rapid replacement of indexable inserts, keeping machine downtime to a minimum. Straightforward compatibility with RHKW 1003 indexable inserts Designed for use with RHKW 1003 indexable inserts—compatible with Ingersoll insert systems—the cutter simplifies inventory management by aligning with a widely used insert standard. Indexable inserts allow users to replace only the cutting grade rather than the whole tool, lowering tooling cost per part and enabling quick adaption to different materials or finish requirements without changing the tool body. Compact dimensions for flexible machining setups With an overall length of 40 mm and a weight of 0.243 kg, this cutter is suited to applications where tool overhang must be kept short. The compact form reduces bending moments and helps maintain concentricity at higher spindle speeds. Where space is restricted or where multiple tools are mounted close together, the modest length and mass of the unit improve accessibility and reduce runout-related quality issues. Contact Metav Werkzeuge today to discuss how the Teknik Cutting Tools Round Insert Cutter T602TM fits into the tooling mix for your production; deliveries and technical pairing can be arranged directly from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T602TM Manufacturer: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Numbers / Core technical data Diameter: 40 mm Cutting edges: 4 Overall length: 40 mm Shank diameter: 16 mm Weight: 0.243 kg Special features / Versions Compatible with RHKW 1003 indexable inserts Compatible insert manufacturer: Ingersoll Clamping screw: M3,5 Torx screw: M4x10 Torx key: T15 FAQ Which inserts are compatible with this cutter? The cutter is designed for RHKW 1003 indexable inserts; Teknik Makina supplies the body sized for these inserts and the system is compatible with Ingersoll insert variants. What is the cutting diameter and how many cutting edges are there? The tool provides a Ø 40 mm cutting diameter and has 4 cutting edges, offering balanced cutting action for steady material removal. How is the insert secured in the cutter? Insert retention uses a M3,5 clamping screw plus a M4x10 Torx screw, tightened with a T15 key to ensure repeatable and secure seating on the cutter body. What shank size is required for mounting this tool? The cutter has a 16 mm shank (aufnahme 16 mm) and mounts in standard 16 mm tool holders or collars suitable for compact milling heads. Is the tool suitable for compact or space-restricted setups? Yes; the 40 mm overall length and 0.243 kg weight make the cutter well suited to reduced overhangs and tight machining arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
42mm Face Milling Head for SDNW 1205 Indexable Inserts L40mm With Internal Coolant, 90° Cutting Angle - Teknik Makina
Take advantage of the compact design, reliable insert compatibility and internal coolant delivery for consistent face milling in confined set-ups; the 42 mm diameter, four-edge cutting concept and 90° cutting angle make it an efficient choice for standard finishing operations. Order supply or request bespoke advice via Metav Werkzeuge for seamless procurement and technical support. Face-milling head T382TM (42 mm) with internal coolant — for SDNW 1205 indexable inserts by Teknik Makina The Face-milling head T382TM is a compact cutter head engineered for face milling with SDNW 1205 indexable inserts, offering internal coolant and a short overall length for stable machining in confined tool envelopes. 42 mm diameter for compact setups Internal coolant for improved chip evacuation 4 cutting edges for consistent material removal Compatible with Hitachi SDNW 1205 inserts Stable performance in tight tool envelopes The compact 42 mm diameter and short 40 mm overall length reduce overhang and vibration, improving surface finish and repeatability in small setups. A reduced projection means the milling assembly requires less counterbalance and produces fewer deflection-related deviations, which is particularly useful for precise finishing passes and where fixture space is limited. The low mass (0.235 kg) contributes to dynamic stability during acceleration and deceleration phases. Reliable productivity through proven insert compatibility Designed for the SDNW 1205 family of indexable inserts and compatible with Hitachi-supplied grades, the head accommodates four cutting edges that allow multiple indexings before replacement. The 90° cutting angle provides a true face-milling geometry that simplifies programme planning and achieves uniform material removal across the workpiece, reducing cycle time fluctuations and minimising rework. Coolant-through design for longer tool life and cleaner machining The internal coolant channel directs coolant to the cutting zone, enhancing heat dissipation and chip control. Improved cooling reduces thermal wear on the insert cutting edge and supports more consistent edge retention, which translates into longer service intervals and fewer unscheduled stops. In addition, focused coolant flow helps to evacuate chips from the cutting zone, supporting better surface quality and reduced risk of recutting. Secure fastening and straightforward maintenance Assembly uses Torx T15 drive screws (M4x10), providing positive engagement during insertion and maintenance operations and ensuring repeatable clamping torque. The robust fixing method supports consistent seat orientation for the inserts and simplifies changeover procedures on the shop floor. The tool is identified as SKU T382TM, enabling straightforward stock control and reordering through established procurement channels. Contact Metav Werkzeuge for delivery options and technical guidance on the Teknik Makina face-milling head T382TM with internal coolant, and benefit from Metav’s European distribution and specialist advice. Technical data SKU: T382TM Product type: Face-milling head Manufacturer: Teknik Makina Description: for SDNW 1205 Indexable Inserts Numbers / Core technical data Diameter: 42 mm Overall length: 40 mm Weight: 0.235 kg Number of cutting edges: 4 Cutting angle: 90° Special features / Versions Internal coolant (through-coolant) Compatible with SDNW 1205 inserts Compatible with Hitachi insert variants Fastening: Torx T15, screw M4x10 FAQ What insert type fits this cutter head? The cutter head is designed for SDNW 1205 indexable inserts and accepts compatible grades from Hitachi for standard finishing applications. Is the tool suitable for confined workspaces? Yes, the compact 42 mm diameter and 40 mm overall length make the milling head appropriate for tight set-ups where reduced overhang is required. Does the head provide coolant to the insert? The unit features internal coolant to the cutting zone, supporting chip evacuation and improved thermal control at the edge. How many cutting edges are available before insert replacement? The head accepts inserts with four cutting edges, enabling multiple indexings to extend service intervals. Which fastening hardware is used for insert clamping? Fastening is carried out with Torx T15 screws, specification M4x10, ensuring secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
42mm Turned Tool Holder For TPKN 1603 Indexable Inserts 90° Cutting Angle, M6x17 Screw - Teknik Makina
Take advantage of a compact, purpose-built turning head that combines a 90° cutting angle with a slim 16 mm shank for reliable shoulder cuts and reduced setup time; order directly via Metav Werkzeuge or ask our consultants for help with integration and rapid supply from Emmerich. Corner tool head T114TM – for TPKN 1603-2204 indexable inserts, 90° cutting angle (Teknik Makina) The Corner tool head T114TM is a compact turning head designed for use with TPKN 1603-2204 indexable inserts, providing a true 90° cutting angle for precise shoulder and face turning tasks. Compact 16 mm shank for small housings Precise 90° cutting angle for shoulder cuts Compatible with TPKN 1603 indexable inserts Lightweight 0.28 kg for reduced tool load Accurate shoulder turning with a fixed 90° geometry The compact turning head delivers a defined 90° cutting angle, which ensures repeatable shoulder faces and perpendicular contours. A fixed-angle geometry reduces alignment work and simplifies programming for CNC and manual setups alike. The tool head is engineered to accept standard indexable plates, so production runs benefit from predictable tool life and consistent surface finish. The combination of geometric stability and straightforward mechanics supports higher first-pass accuracy and fewer reworks. Fast, secure insert clamping and maintenance Clamping is accomplished with an M6x17 clamping screw and a corresponding 4 mm Allen key, providing a secure hold for the insert and minimising vibration during cutting. The straightforward screw clamping system allows quick index and replacement of inserts, reducing downtime. Because replacement is mechanical rather than hydraulic or screwless, maintenance procedures remain simple and easily documented in workshop routines, enabling efficient shift handovers and clear toolroom practices. Compact dimensions that ease integration With a 42 mm diameter, an overall length of 44 mm and a 16 mm shank, this head is designed for installations where tool overhang and clearance are limited. The modest mass of 0.28 kg lowers inertia on the turret and helps to keep dynamic loads down during rapid traverses. The small footprint supports closer nestings of tools on multi-station turrets and is particularly useful where space, rigidity and repeatability must be balanced. Compatibility and practical application The holder is specified for TPKN 1603 indexable inserts and is supplied to accept standard insert geometries used for shoulders and light profiling. The three-edge seating supports indexable rotation and makes economical use of each insert. The tool head is suitable for production, small-batch and prototyping environments where reliable clamping, compact form and repeatable results are required; it supports quick changeovers without complex adapters or bespoke mounts. Contact Metav Werkzeuge for tailored advice on Teknik Makina’s corner tool head T114TM and secure supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T114TM Manufacturer: Teknik Makina Description: for TPKN 1603-2204 Indexable Inserts Weight: 0.28 kg Facts Diameter: 42 mm Overall length: 44 mm Shank diameter: 16 mm Cutting angle: 90° Number of cutting edges: 3 Special features Compatible with TPKN 1603 indexable inserts Clamping screw: M6x17 Allen key size: 4 mm Fixed-angle corner turning head FAQ What insert type fits this turning head? The turning head is designed for TPKN 1603 indexable inserts; it also lists compatibility with the TPKN 1603-2204 family for common insert formats. Which shank diameter is required for mounting? Mounting requires a toolholder or arbor that accepts a 16 mm shank diameter; the compact shank is intended for close-packed turret stations. How is the insert secured in the head? An M6x17 clamping screw secures the insert, tightened with a 4 mm Allen key, providing a secure mechanical clamp for stable cutting. Is the cutting angle adjustable? The tool head provides a fixed 90° cutting angle for repeatable shoulder and face turning; the geometry is chosen for perpendicular cuts rather than adjustable angling. What are the key dimensions to check for turret clearance? Relevant dimensions are 42 mm diameter and 44 mm overall length; the low mass of 0.28 kg also helps reduce dynamic loading on the turret. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm 45° Facing Tool Holder for SEET R245 12T3 Indexable Inserts, 4 Cutting Edges, 22mm Shank Diameter - Teknik Makina
Efficient 45° facing performance meets compact mounting: the head combines a 45° cutting geometry with a 22 mm shank and four cutting edges to deliver consistent finishing and predictable tool life — order the component directly via Metav Werkzeuge or consult our advisers for application advice. Face Milling Head T560TM — 45° cutter head for SEET 12T3 indexable inserts (Teknik Makina) The Face Milling Head T560TM is a 45° cutter head engineered for precise facing and finishing with SEET R245 12T3 indexable inserts, suitable for light- to medium-duty turning and facing tasks in production and workshop environments 45° cutting geometry for precise facing 22 mm shank for secure clamping Compatible with SEET R245 12T3 inserts (Sandvik, XTC, ZCC) Four cutting edges for efficient material removal Consistent surface quality through optimised geometry The 45° geometry delivers a reduced effective cutting angle and smoother chip flow, which improves surface finish while lowering peak forces. With the 45° cutting angle and insert family SEET R245 12T3, this cutter head is configured to produce repeatable facing results on workpieces where dimensional consistency matters. The design helps to spread wear across the insert edge, extending the usable life of each indexable cutting edge and reducing changeover frequency for the production line. Precision-oriented shops will appreciate the controlled chip evacuation and stable cutting conditions that contribute to predictable cycle times. Compact mounting and reliable fixation for stable operations A compact profile with a 22 mm shank and an overall length of 40 mm makes the head easy to integrate into common toolholders while keeping overhang to a minimum. The head uses M3.5x11 Torx clamping screws and an M5x7 hex screw for secure insert retention; the matching Torx key size is T15, supporting quick, toolroom-friendly insert changes. The small mass (0.345 kg) and 50 mm head diameter combine to reduce vibration and permit higher feed rates without compromising finish. These mechanical details ensure robust clamping and minimise downtime during index changes. Broad compatibility reduces tooling variants in the workshop Designed for the SEET R245 12T3 insert form, the head accepts indexable inserts from major manufacturers including Sandvik, XTC and ZCC, enabling standardisation across multiple machine stations. This cross-brand compatibility allows production planners to consolidate inventory and specify a single cutter head where previously several types were required. The four cutting edges of the head enable economical use of inserts and facilitate uninterrupted production, making the component a pragmatic choice for workshops seeking to simplify procurement while maintaining cutting performance. Built for dependable use in everyday machining The cutter head’s combination of a compact 50 mm design, secure fixing and a four-edge configuration supports reliable performance across repetitive facing tasks. The geometry and mechanical interface are selected to deliver a balance of precision, durability and ease of maintenance so that shopfloor teams can focus on throughput rather than frequent tool adjustments. Backed by Teknik Makina engineering, the head is a practical addition for operations that value consistent part quality and straightforward tool logistics. Order the Teknik Makina Face Milling Head T560TM via Metav Werkzeuge for a straightforward upgrade to facing capability, or contact our consultants at Metav Werkzeuge for tailored application guidance Technical data Article number: T560TM Brand: Teknik Makina Description: Face milling head for SEET 12T3 indexable inserts Facts Shank diameter (d): 22 mm Head diameter: 50 mm Overall length: 40 mm Cutting angle: 45° Weight: 0.345 kg Cutting edges: 4 ECLASS: 21181015 Special features Compatible inserts: SEET R245 12T3 Compatible brands: Sandvik, XTC, ZCC Torx screw: M3.5x11 Hex screw: M5x7 Torx key: T15 U-plate: TA052 FAQ Which insert type is required for this cutter head? The face milling head accepts SEET R245 12T3 indexable inserts and is prepared for use with inserts from Sandvik, XTC and ZCC. What is the shaft diameter for mounting? The tool is supplied with a 22 mm shank diameter suitable for standard 22 mm toolholder bores. How many cutting edges are available per head? The head features four cutting edges, enabling economical indexable-insert use and uninterrupted machining cycles. Which screw types are used for insert clamping? Insert retention uses an M3.5x11 Torx screw and an M5x7 hex screw; the Torx key size is T15. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm 90° Corner Milling Head For LNMT 1306 Indexable Inserts, M4x10 Torx T15 - Teknik Makina
Take advantage of a compact, high‑rigidity 90° milling solution that accepts LNMT 1306 indexable inserts and reduces changeover time. The combination of a Ø 50 mm head, a 22 mm mounting bore and secure M4x10 Torx fastening supports stable side milling operations; order directly via Metav Werkzeuge or consult their technical advisors for application-specific guidance. Eckmesserkopf — 90° corner milling head for LNMT 1306 indexable inserts by Teknik Makina Eckmesserkopf is a compact 90° corner milling head designed for side milling and shoulder operations with LNMT 1306 indexable inserts, offering a space‑saving solution where rigidity and quick insert changes are essential. 90° corner milling geometry Compatible with ISCAR LNMT 1306 inserts Ø 50 mm diameter, 22 mm mounting bore Supplied with M4x10 Torx screw and T15 key Better cycle stability through rigid 90° geometry A toolholder with a defined 90° cutting angle provides predictable force vectors during side milling and shoulder passes. The combination of Ø 50 mm head diameter and a solid 22 mm mounting bore increases stiffness at the cutting zone, which reduces vibration and improves surface finish. For production environments where consistent cycle time and repeatability matter, the compact geometry translates into fewer rejects and more uniform part dimensions. The modest mass of 0.337 kg keeps the assembly light without sacrificing stability. Minimise downtime with proven insert compatibility Fast changeovers and a broad supply chain are decisive in shopfloor productivity. This head accepts LNMT 1306 indexable inserts and is ISCAR-compatible, which simplifies procurement and stocking routines. The standardised clamping interface and the supplied M4x10 Torx screw (Torx key T15) enable quick and secure insert changes while preserving cutting edge position. For manufacturers running mixed tool inventories, the compatibility reduces tooling complexity and shortens setup times. Compact design that fits tight fixtures and delivers accuracy With an overall length of 40 mm and a compact head profile, the toolholder is engineered for installations where space is restricted but precision cannot be compromised. The short projection lowers bending moments and maintains cut stability on narrow shoulders or deep pocket entries. The measured Ø 50 mm across the cutting head and the concise overall length enhance access to tight features while enabling the use of robust cutting parameters for efficient material removal. Practical fastening and handling for everyday workshop use Operational reliability starts with simple, repeatable clamping. The head is supplied with an M4x10 Torx screw secured by a T15 key, ensuring a consistent clamping torque and minimal risk of insert movement under load. The straightforward fastening arrangement supports routine maintenance and tool rotation schedules, making the head suitable for both single‑shift operations and continuous production runs. The design keeps service tasks quick and reduces the time tools spend out of production. For application advice or to arrange procurement of the Teknik Makina 90° corner milling head, contact Metav Werkzeuge GmbH — email info@metav-werkzeuge.com or phone +49 2822 7131930; Metav’s specialists will advise on integration and availability. Technical Data Article number: T228TM Manufacturer: Teknik Makina Product designation: Eckmesserkopf for LNMT 1306 indexable inserts Weight: 0.337 kg Core data Diameter: 50 mm Overall length: 40 mm Mounting bore / shank diameter: 22 mm Cutting angle: 90° Number of cutting edges: 5 Torx screw: M4x10 Torx key: T15 Features ISCAR-compatible Designed for LNMT 1306 indexable inserts Compact head for tight fixtures Supplied ready for installation FAQ What inserts fit this corner milling head? The head is designed for LNMT 1306 indexable inserts and is compatible with ISCAR variants specified for this insert designation. Is the mounting diameter suitable for standard toolholders? Yes, the 22 mm mounting bore matches common compact toolholder interfaces used in milling assemblies. Which fastening hardware is supplied with the tool? The tool is supplied with an M4x10 Torx screw and requires a T15 key for secure clamping of the insert. Can this head be used for shoulder milling on hardened materials? The head provides a rigid platform for shoulder milling; selection of appropriate inserts and cutting data is required for hardened materials to ensure tool life and surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm 90° Corner Turning Head For ANMX 1607 Indexable Inserts, 4 Cutting Edges, 22mm Shank - Teknik Makina
Order with confidence: combine precise 90° geometry, secure clamping and broad insert compatibility to reduce set-up time and improve repeatability. Choose fast delivery and expert advice from Metav Werkzeuge for reliable workshop supply. Teknik Makina 90° corner tool head – for ANKX 1607 indexable inserts The Teknik Makina 90° corner tool head is a compact turning head designed for external turning where a right‑angled tool orientation and reliable insert clamping are required 90° head for accurate external turning Compatible with ANKX/ANMX 1607 inserts 22 mm tool shank for stable clamping Secured with M4.5×11 Torx screw (T15) Accurate 90° geometry for consistent turning results The 90° cutting angle ensures a predictable tool path and stable contact between insert and workpiece, which translates into consistent dimensional results and reduced rework. The design is optimised for use with ANMX/ANKX 1607 indexable inserts, allowing familiar insert geometries to be used without modification to the machining programme. For operations where flank finish and repeatability matter, this orientation reduces the need for frequent adjustment and supports efficient, repeatable setups. Stable clamping and quick insert changes to keep production moving A 22 mm shank provides secure mounting in standard toolholders and improves resistance to chatter during heavier cuts. The insert pocket is held by an M4.5×11 Torx screw and tightened with a T15 key, creating a compact, low‑profile assembly that simplifies changing and indexing inserts. The combination of a robust shank and reliable screw fixing minimises downtime during tool changeovers, supporting shorter cycle times and smoother process flow in daily workshop routines. Compact form factor with practical compatibility for workshop workflows With a head diameter of 50 mm, an overall length of 40 mm and four cutting edges, the unit balances accessibility and rigidity in a small footprint. The compact dimensions make it suitable for confined setups where larger holders would interfere, while the compatibility with common indexable inserts keeps inventory low and tooling familiar. The result is a pragmatic solution for small‑batch production or mixed machining environments where flexibility and dependable fixtures are priorities. For demanding right‑angle turning tasks, opt for the Teknik Makina 90° corner tool head and contact Metav Werkzeuge for tailored advice and prompt delivery from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: T171TM Description: 90° corner tool head for ANKX 1607 Indexable Inserts Manufacturer: Teknik Makina Data Diameter: 50 mm Overall length: 40 mm Shank (mount) diameter: 22 mm Weight: 0.307 kg Number of cutting edges: 4 Cutting angle: 90° Torx screw: M4.5×11 Torx key: T15 Special features Compatible with ANMX / ANKX 1607 indexable inserts Compact, low‑profile construction Secure screw clamp for quick insert changes Suitable for external turning and right‑angle tool orientations FAQ Which inserts fit this turning head? The turning head accepts ANMX/ANKX 1607 indexable inserts; the geometry and pocket are designed for these insert types to ensure correct seating and cutting performance. What shank diameter is required for mounting? A 22 mm shank is specified for the holder; the 22 mm mount provides stable clamping in compatible toolholders. How is the insert secured? Inserts are held by an M4.5×11 Torx screw tightened with a T15 key to ensure a compact and reliable clamping interface. What applications suit this tool head? The component is intended for external turning and other right‑angle operations where a 90° tool orientation and use of ANMX/ANKX 1607 inserts are beneficial. What is the article number and weight? The article number is T171TM and the weight is 0.307 kg Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm 90° External Turning Tool Holder For WNGX 0806 Indexable Inserts, M5x12 Torx T20 - Teknik Makina
Benefit from the 90° cutting geometry and 22 mm mounting shank for dependable corner turning and consistent tool life; compatibility with WNGX 0806 indexable inserts adds versatility across common turning tasks. Order the corner turning head directly via Metav Werkzeuge or consult their specialists for application advice. Corner turning head for WNGX 0806 indexable inserts — 90° — Teknik Makina Corner turning head for 90° external corner turning with WNGX 0806 indexable inserts, designed for stable clamping in light to medium turning operations 90° cutting geometry for accurate corner cuts Compatible with WNGX 0806 indexable inserts 22 mm mounting shank for stable clamping M5x12 Torx screw and T20 key specification High-precision geometry for repeatable corner turning The compact turning head features a 90° cutting angle that provides a consistent engagement geometry for corner operations. With a 50 mm head diameter and a 22 mm mounting shank, the assembly gives a rigid connection to the toolpost which reduces chatter and improves surface finish. The component weight of 0.277 kg and an overall length of 40 mm contribute to a low overhang, lowering bending moments and extending insert life. This combination of dimensions is advantageous when machining narrow shoulders or external corners where tool stability and repeatability matter most. Fast insert handling and maintenance benefits Designed for use with WNGX 0806 indexable inserts, the head accepts commonly available carbide grades from Korloy, enabling quick material- and application-specific choices. The clamping system is specified with an M5x12 Torx screw and a T20 key interface, simplifying insert changes and minimising downtime during batch production or tool replacement. The head incorporates five cutting edges arrangement, allowing multiple indexings before replacement, which reduces tooling costs and maintenance frequency. Clear, standardised interfaces make the holder compatible with typical lathe toolposts and toolholders in industrial workshops. Application scope and procurement confidence The turning head is suitable for general steel turning and related workshop applications where precise corner definition and short tool overhangs are required. As a product supplied under Teknik Makina designation and stocked through Metav’s distribution, procurement benefits from a central European quality filter: Metav’s Emmerich facility ensures consistent inspection and reliable delivery. Metav’s decades of precision experience, broad product range and established customer base support sustained production planning and inventory rationalisation, providing reassurance for purchasing decisions. For reliable 90° corner turning choose Teknik Makina’s corner turning head and contact Metav Werkzeuge for ordering and technical advice from Emmerich. Technical data Article number: T775TM Manufacturer: Teknik Makina Compatible inserts: WNGX 0806 Compatible insert manufacturer: Korloy Facts Mounting shank diameter: 22 mm Head diameter: 50 mm Overall length: 40 mm Weight: 0.277 kg Cutting angle: 90° Number of cutting edges: 5 Special features For WNGX 0806 indexable inserts Torx screw: M5x12 Torx key fit: T20 Compact design for reduced overhang FAQ What insert form does the turning head accept? The turning head accepts WNGX 0806 indexable inserts and is compatible with Korloy insert geometries for that size. Which toolholder mounting diameter is required? A 22 mm mounting shank is specified for stable clamping in standard toolposts. Is a special screw or key required for insert clamping? Insert clamping uses an M5x12 Torx screw with a T20 key interface. How does the compact design affect machining performance? The reduced overall length and 50 mm head diameter lower overhang and bending moment, improving rigidity and surface finish during corner turning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm 90° Indexable Insert Turning Head For XNEX 0806, 4 Cutting Edges, 22mm Shank - Teknik Makina
Take advantage of a stable 90° cutting geometry combined with quick compatibility for XNEX 0806 indexable inserts to keep cycle times predictable and tool changeovers efficient. Order the tool directly via Metav Werkzeuge or consult their specialists for integration support. T840TM Angle Tool Holder (90°) — for XNEX 0806 Indexable Inserts, by Teknik Makina The T840TM angle tool holder is a compact turning head engineered for accurate 90° facing and external turning using XNEX 0806 indexable inserts. 90° cutting angle for reliable facing operations Compatible with XNEX 0806 indexable inserts 22 mm shank diameter for secure clamping Torx screw M4x12.5, T15 Maintain process consistency with a rigid 90° geometry The T840TM is built around a defined 90° cutting angle that stabilises the contact between insert and workpiece. This geometry reduces off-axis loads and supports repeatable part accuracy, especially during facing and square shoulder operations. The holder’s Ø50 head diameter and 45 mm overall length contribute to a compact footprint while preserving rigidity; the reduced overhang helps to lower chatter risk and to sustain consistent tool life, which benefits batch production and serial machining alike. Fast, predictable indexable insert handling for reduced downtime Designed specifically for XNEX 0806 indexable inserts, the tool holder enables quick insert indexing and predictable seating. Compatibility with established brands such as SECO and WINSTAR ensures access to a broad range of insert grades and geometries for different materials. The clamping system uses a M4x12.5 Torx screw with T15 specification to secure the insert; this simple torque interface supports efficient changeovers and consistent clamping forces, helping to maintain cutting stability and minimise rework. Secure shank connection and workshop integration A 22 mm shank diameter provides a precise fit in standard tool posts and collets, while the unit’s modest mass of 0.4 kg makes handling and fixture changes straightforward. The holder’s four cutting positions (noted as 4 cutting edges) permit multiple reindexes per insert, improving cost-efficiency in medium-duty turning tasks. For mixed-tool workshops, the compact design and common insert form factor simplify stock management and reduce the number of specialised holders required for different turning applications. Contact Metav Werkzeuge for tailored technical advice on integrating the Teknik Makina T840TM into production setups; call +49 2822 7131930 or email info@metav-werkzeuge.com for fast, expert support Technical data Article number: T840TM Manufacturer: Teknik Makina Product: Angle tool holder for XNEX 0806 indexable inserts Compatible insert manufacturers: SECO, WINSTAR Facts Shank diameter: 22 mm Head diameter: Ø50 mm Cutting angle: 90° Overall length: 45 mm Cutting edges: 4 Weight: 0.4 kg Special features Compatible with XNEX 0806 indexable inserts Torx screw M4x12.5 Torx key specification: T15 ECLASS: 21180902 FAQ Which insert size is supported by this holder? The holder accepts XNEX 0806 indexable inserts; insert compatibility with brands such as SECO and WINSTAR is specified for the Teknik Makina T840TM (SKU T840TM). What shank diameter is required for clamping? A 22 mm shank diameter is specified for the T840TM, ensuring a tight fit in matching tool posts and collets. How many usable cutting positions does the assembly provide? The T840TM design accommodates 4 cutting edges, allowing multiple reindexes before insert replacement is required. What fastener is used to secure the insert? Insert clamping is achieved with a M4x12.5 Torx screw; the Torx specification is T15 for consistent torque application. Is the tool suitable for facing and square-shoulder turning? Yes — the 90° cutting geometry of the T840TM is optimised for facing and square-shoulder operations where defined perpendicular cuts are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Cutter Head for SPMT 1204 Indexable Inserts 90° With Internal Coolant, L40mm - Teknik Makina
Take advantage of compact dimensions, internal coolant and a 90° cutting geometry for reliable, repeatable machining — order the tool head directly via Metav Werkzeuge or contact our consultants for material‑specific advice. Eckmesserkopf T650-1TM — 50 mm corner tool head with internal coolant by Teknik Makina The Eckmesserkopf is a compact corner tool head designed for orthogonal operations with SPMT 1204 indexable inserts, offering controlled coolant delivery and a short overall length for confined setups. 50 mm diameter for compact setups Internal coolant for improved chip control Four cutting edges for extended service intervals 90° cutting angle for orthogonal turning Consistent chip evacuation for uninterrupted machining The compact head delivers controlled cooling directly to the cutting edge via internal coolant, reducing heat at the cutting zone and improving tool life. Designed around a 50 mm diameter, the short L40 mm overall length keeps overhang to a minimum, which helps to reduce deflection and chatter. This combination enables more stable cutting forces when using SPMT 1204 inserts and supports sustained, high‑quality surface finishes in short‑reach applications. Fast indexable insert changes and secure mounting Compatibility with SPMT 1204 indexable inserts and the use of a Torx T20 drive make insert replacement straightforward and repeatable. The head is secured with M5x12 Torx screws that ensure consistent clamping force and alignment. Fewer handling steps during tool changes translate into reduced downtime and predictable cycle times on CNC lathes and turning centres, delivering measurable efficiency gains across production batches. Stable geometry for precision and repeatability With a defined 90° cutting angle and four cutting edges, the design emphasises geometric stability and prolonged tool usage between indexing. The robust construction and balanced mass distribution—weighting approximately 0.362 kg—support precise, repeatable cuts in short‑reach external operations. The tool head’s form factor is especially suited to setups where rigidity and positional accuracy are critical for maintaining tolerances. Practical assembly and workshop integration The head’s compact profile and standardised fastening reduce fixturing complexity for retrofit or new toolpost arrangements. Internal coolant routing is designed to integrate with common machine supplies to ensure efficient chip control without elaborate modifications. Assembly and maintenance use familiar workshop tools and procedures, simplifying stock management and operator training while keeping set‑up times predictable. For tailored procurement or technical consultation on the Teknik Makina T650-1TM, contact Metav Werkzeuge for specialist advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: T650-1TM ECLASS: 21181015 Product type: Eckmesserkopf Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.362 kg Cutting edges: 4 Cutting angle: 90° Special features Compatible inserts: SPMT 1204 Internal coolant: yes Torx key: T20 Torx screw: M5x12 Manufacturer: Teknik Makina FAQ Which inserts are compatible with this tool head? The head is designed for SPMT 1204 indexable inserts; the geometry and pocket accept standard SPMT 1204 sizes for reliable seating and accurate cutting. Is coolant delivered directly to the cutting edge? Yes, the internal coolant channel supplies coolant to the cutting zone, improving chip evacuation and extending insert life for the Teknik Makina Eckmesserkopf T650-1TM. What operations suit this corner tool head best? The 90° cutting angle and compact length make the head ideal for orthogonal turning and short‑reach external facing where rigidity and surface quality matter. Which fastening hardware is used for insert clamping? Insert clamping uses M5x12 Torx screws operated with a Torx T20 drive to ensure consistent clamping and repeatable seating. Can this head be used in confined toolpost setups? The compact 50 mm diameter and 40 mm overall length are optimised for tight installations, where reduced overhang helps maintain stability and accuracy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Cutter Head for WNEX 0806 Indexable Inserts L40mm, 90° Cutting Angle - Teknik Makina
Take advantage of a compact, high-stability turning solution that combines 50 mm body diameter, 90° cutting geometry and compatibility with WNEX 0806 indexable inserts for reliable corner profiling; order directly via Metav Werkzeuge or consult our specialists for application advice. T771TM 50 mm Corner Turning Head – for WNEX 0806 Indexable Inserts (Teknik Makina) The corner turning head is engineered for precise corner and profile turning with WNEX 0806 indexable inserts in compact toolholders and turret installations 50 mm diameter for stable turning 40 mm overall length for compact setups 90° cutting angle for corner profiling Compatible with WNEX 0806 indexable inserts Stable geometry that improves process reliability The holder’s 50 mm body and 40 mm overall length create a rigid mounting that reduces vibration and deflection during machining, which directly improves surface finish and dimensional repeatability. The 90° cutting angle is ideal for cornering and profile operations where a clear shoulder and accurate corner form are required. Compatibility with WNEX 0806 indexable inserts standardises tooling across multiple machines, reducing changeover times and inventory complexity; the result is a measurable gain in process stability and fewer scrap parts. Quick insert clamping and straightforward serviceability Designed for efficient maintenance, the head secures inserts using an M4x10 Torx screw and requires a T15 Torx key, allowing rapid insert changes and minimal downtime. The use of indexable inserts eliminates the need for regrinding, and the head’s accessible screw layout supports safe, repeatable clamping. Lightweight at 0.285 kg, the component is easy to handle during set-up while still providing sufficient mass to dampen cutting vibrations, helping to protect both the insert and the machine spindle. Compatibility and application benefits for diverse workshops Manufactured by Teknik Makina and suitable for YG-1 supplied WNEX 0806 inserts, this tool head fits production and job-shop environments where flexibility and inventory efficiency matter. The design supports multi-edge insert use, extending tool life and reducing cost per part. By standardising on a reliable indexable system and a robust holder, shops can simplify tool management, increase uptime and achieve consistent part quality across batches and machine types. For precision corner turning with proven compatibility, contact Metav Werkzeuge for application-specific advice or to arrange supply of the T771TM corner turning head; Metav’s specialists in Emmerich can help confirm suitability for the intended turning tasks and ensure timely delivery Technical Data SKU: T771TM Label: 50mm Eckmesserkopf WNEX 0806 L40mm Manufacturer: Teknik Makina Compatible inserts: WNEX 0806 (YG-1) Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.285 kg Cutting angle: 90° Cutting edges: 5 Torx screw: M4x10 Torx key: T15 eClass: 21181015 Special features Product type: Corner turning head Suitable for indexable inserts Compatible insert manufacturer: YG-1 Intended use: corner and profile turning SKU identification: T771TM FAQ What inserts are compatible with this turning head? The turning head accepts WNEX 0806 indexable inserts; compatibility is specified for inserts supplied by YG-1 and the holder is designed to locate and clamp these types reliably. How is the insert secured in the holder? Inserts are fastened with an M4x10 Torx screw; the required key for removal and fitment is T15, allowing quick and repeatable insert changes. Is this holder suitable for heavy-duty turning? The holder’s 50 mm diameter and robust geometry provide good rigidity for many turning tasks; for very heavy cuts consult Metav Werkzeuge to confirm suitability for specific machine and process parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Cutting Head for WNMU 0706 Indexable Inserts L40mm with Internal Coolant - Teknik Makina
The compact design and built-in coolant channel deliver consistent edge life and stable corner turning, while the 50 mm diameter and 40 mm overall length keep setups space-efficient; order the tool directly via Metav Werkzeuge or consult the Metav specialists for process integration. Corner tool head T315TM — 50 mm diameter, internal coolant, for WNMU 0706 indexable inserts (Teknik Makina) Corner tool head T315TM is a compact 50 mm turning head designed for precision corner operations using WNMU 0706 indexable inserts, combining small envelope and coolant support for stable metalcutting. 50 mm head diameter Internal coolant supply Compatible with WNMU 0706 inserts Compact 40 mm overall length Precision performance for consistent finishing The short, rigid construction of this holder gives repeatable positioning and reduced vibration for fine finishing operations. The 50 mm diameter and robust geometry focus cutting forces close to the spindle, which improves tool life and surface quality when using WNMU 0706 indexable inserts. This results in fewer insert changes and more predictable process windows, supporting leaner machining cycles and higher machine uptime. Integrated coolant and secure clamping reduce downtime An internal coolant channel directs cutting fluid precisely to the cutting edge, aiding chip evacuation and heat control for longer insert life. The clamping system uses a M5x12 Torx screw secured with a T20 key, enabling quick and reliable insert changes with consistent clamping torque. The compact 40 mm overall length and 22 mm shank keep the toolholder stable in tight toolpacks, shortening setup times and lowering the risk of run-out related rejects. Broad compatibility and workshop practicality Compatibility with WNMU 0706 inserts and recognition of Sumitomo as a matching insert manufacturer make integration into existing tooling setups straightforward. The holder’s 90° cutting geometry supports standard cornering applications across common ferrous and non-ferrous turning tasks, while the compact form factor helps maximise turret capacity. The build quality from Teknik Makina ensures reliable repeatability in serial production environments and easier tool management for procurement teams. Contact Metav Werkzeuge for a tailored tooling recommendation and fast supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for consultation and order processing Technical Data Article number: T315TM E-class: 21181015 Label: 50mm Eckmesserkopf WNMU 0706 L40mm mit Innenkühlung Core specifications Diameter: 50 mm Overall length: 40 mm Shank diameter: 22 mm Cutting angle: 90° Number of cutting edges: 5 Materials & features Internal coolant: yes Compatible inserts: WNMU 0706 Compatible insert manufacturer: Sumitomo Torx key: T20 Torx screw: M5x12 Manufacturer: Teknik Makina Product type: Corner tool head FAQ What inserts fit this tool head? The tool head accepts WNMU 0706 indexable inserts; the design is intended for those insert geometries and compatible Sumitomo variants. Does the holder provide internal coolant? Yes — the Corner tool head T315TM features internal coolant supply to the insert pocket to improve chip control and thermal stability. Which fastening hardware is required for insert clamping? Clamping uses an M5x12 Torx screw tightened with a T20 key, providing consistent and serviceable clamping torque for secure insert fixation. Is the holder suitable for tight turret pockets? With a 40 mm overall length and 22 mm shank, the holder is designed for compact installations and efficient use of turret space. What cutting angle does the tool head offer? The tool head presents a 90° cutting geometry suitable for standard corner-turning tasks and related finishing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Milling Head 90° For XOMX 1806 Indexable Inserts, M4.5x11 Torx T15 - Teknik Makina
Take advantage of a precise 90° cutting solution paired with broad compatibility: the combination of a 90° cutting angle, a Ø22 mm shank and compatibility with SECO XOMX 1806 inserts improves process reliability and reduces rework. Order via Metav Werkzeuge for fast supply and expert advice. Corner milling head T520TM (90° right-angle cutter, for XOMX 1806 inserts) — Teknik Makina The Corner milling head T520TM is a 90° right-angle cutter head designed for indexable inserts, intended for accurate face and shoulder milling in CNC and milling centre setups 90° cutting angle for precise right-angle milling Compatible with SECO XOMX 1806 inserts Ø22 mm shank for secure clamping Torx M4.5x11 screw with T15 key included Accurate right-angle milling that reduces setup time The head provides a 90° cutting angle that is engineered to deliver true shoulders and perpendicular faces with minimal correction. Using inserts from the XOMX 1806 family (compatible with SECO standards) simplifies tool sourcing and changeover, because standard indexable inserts fit directly. The compact Ø50 mm body and controlled overall length make the unit suitable for tight envelope requirements, while the measured dimensions contribute to predictable toolpaths and reduced secondary finishing — a clear benefit where cycle time and first-pass accuracy matter. Rigid mounting and reliable clamping for consistent finishes A robust Ø22 mm shank ensures stable clamping in standard toolholders and reduces vibration during cutting, which supports longer insert life and a better surface finish. Clamping integrity is secured via the specified Torx M4.5x11 screw, tightened with a T15 key, offering repeatable torque and simple maintenance routines. At a nominal mass of 0.337 kg, the assembly balances rigidity with manageable inertia, aiding high-speed indexing and safe handling when loading into the spindle. These measurable characteristics translate into fewer interruptions and more predictable production runs. Practical use, maintenance and application guidance The right-angle head is intended for face and shoulder milling where a 90° approach is required; it is optimised for the XOMX 1806 insert format and is best combined with matching insert grades for the workpiece material. Routine checks of the Torx fastening and clean contact faces are advised to maintain concentricity and prolong service life. For machining strategies, pair the head with stable holders and moderate axial engagement on hard materials to extend insert life. Where specific material allowances or cutting data are required, consult technical feed and speed charts and align insert grade to the substrate. For application support or to secure available stock of the Teknik Makina T520TM corner milling head, contact Metav Werkzeuge for tailored advice and prompt dispatch — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: T520TM Manufacturer: Teknik Makina Compatible inserts: XOMX 1806 (SECO) Cutting angle: 90° Torx screw: M4.5x11 Facts Diameter: 50 mm Shank diameter: Ø22 mm Total length: 45 mm Weight: 0.337 kg Number of cutting edges: 5 Special features Compatible with SECO XOMX 1806 indexable inserts Torx key size: T15 Right‑angle milling application SKU: T520TM FAQ What insert type does the head accept? The corner milling head accepts XOMX 1806 indexable inserts compatible with SECO standards; the T520TM is specified for that insert format to ensure correct fit and clamping. Which clamping hardware is supplied or required? Clamping is achieved with a Torx M4.5x11 screw tightened using a T15 key; the specified hardware secures the insert seat and ensures repeatable torque for the T520TM. Is the shank suitable for standard toolholders? The unit uses a Ø22 mm shank, which is compatible with holders made for that diameter and provides a secure, rigid mounting for reliable machining. What machining tasks is this head best for? The right‑angle 90° geometry is suited to face and shoulder milling where square corners and perpendicular faces are required, particularly in CNC milling centres and modular tool setups. Who supplies spare parts and technical advice? Metav Werkzeuge supplies the Teknik Makina T520TM and can provide spare screws, keys and application guidance; contact details are available for ordering and technical consultation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Milling Head for APKT 1705 Indexable Inserts, 90° Cutting Angle, M4x10 Torx Screw - Teknik Makina
Take advantage of a compact, robust tool holder that pairs compatibility with APKT 1705 indexable inserts and a defined 90° cutting angle for reliable corner turning. With a 50 mm body diameter and a 22 mm shank, the design offers stable clamping and predictable machining results — order directly via Metav Werkzeuge or consult our specialists for application support. Corner turning head – tool holder for APKT 1705 indexable inserts, 90° – Teknik Makina A Corner turning head designed as a compact tool holder for turning and profiling operations with APKT 1705 indexable inserts, optimised for precise corner work in workshop and CNC environments Corner turning head for APKT 1705 inserts 90° cutting angle for defined corner profiling 50 mm diameter body, 22 mm shank Secured with M4x10 Torx screw and T15 key Stable geometry for predictable machining results The holder’s 50 mm diameter body and 22 mm shank create a rigid connection between machine and insert that reduces vibration and improves surface finish. The defined 90° cutting angle ensures repeatable corner profiles and simplifies programming for CNC turning cycles. Specified mass and dimensions contribute to balanced rotation and steady tool behaviour, which translates into reduced tool chatter and more consistent tolerances on finished parts. Fast insert changes and secure clamping Prepared for APKT 1705 indexable inserts and compatible with Taegutec variants, the holder relies on a single M4x10 Torx clamping screw and a T15 key for swift insert replacement. The simple clamping interface minimises downtime during index changes and inspection. For workshops that run mixed batches, the standardised screw and key ensure routine maintenance is efficient and safe without specialised tooling. Compact form factor suited to workshop and CNC use With an overall length of 45 mm and a compact body, the tool holder is ideal where access is limited or where tool overhang must be kept minimal. The design accommodates five cutting edges, enabling multiple indexing operations before replacement is required and extending effective tool life. The combination of compact dimensions and multiple usable edges supports higher throughput on small to medium lathes as well as CNC turning centres. Reliability, traceable supply and workshop confidence The construction is optimised for everyday industrial use: secure clamping, standardised fasteners and clear compatibility reduce installation errors and support process stability. Paired with a reliable supply chain, procurement from an experienced partner reduces risk of downtime. Metav’s distribution from Emmerich acts as a quality filter for the European market, offering consistent availability and product traceability for production planning and stock management. Contact Metav Werkzeuge for application advice, compatibility checks and to secure supply from Emmerich — speak to our consultants for detailed technical guidance or to discuss ordering options. Technical data Article number: T552TM Manufacturer: Teknik Makina Designation: Corner turning head for APKT 1705 indexable inserts Compatible insert type: APKT 1705 Compatible insert manufacturer: Taegutec Torx screw: M4x10 Torx key size: T15 Body diameter: 50 Shank (clamping) diameter: 22 Overall length: 45 Cutting edges: 5 Cutting angle: 90 Weight: 0.362 kg Core dimensions Diameter: 50 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.362 kg Cutting angle: 90° Cutting edges: 5 Special features For APKT 1705 indexable inserts Compatible with Taegutec inserts M4x10 Torx clamping screw T15 Torx key Compact 45 mm design Corner tool holder geometry SKU T552TM FAQ What inserts fit this holder? The holder accepts APKT 1705 indexable inserts; compatible variants from Taegutec are explicitly supported and are listed in the technical data for the T552TM tool holder. How is the insert secured in the tool? Insertion and clamping are performed with the supplied clamping interface using an M4x10 Torx screw tightened with a T15 key to ensure secure fixing and repeatable seating. Is the tool suitable for CNC turning centres? Yes — the compact form, 45 mm overall length and robust shank provide the rigidity required for CNC turning applications and confined tool stations. How many edges can be used before insert replacement? This holder is specified for inserts with five cutting edges, enabling multiple indexing operations before the insert itself needs replacement. What are the key dimensions to check for machine compatibility? Critical dimensions are the 50 mm body diameter and the 22 mm shank diameter; confirm the machine’s tool post or turret accepts a 22 mm shank for proper seating. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Milling Head for APMT 0903 Indexable Inserts 40mm, Internal Coolant - Teknik Makina
Take advantage of a compact, high-stability cutting head that combines a 50 mm diameter and internal coolant for consistent 90° corner machining; order directly via Metav Werkzeuge or request technical advice to ensure immediate fitment to existing toolholders. Corner tool head T240-1TM – 50 mm diameter, internal coolant, for APMT 0903 inserts (Teknik Makina) The Corner tool head T240-1TM is a compact cutting head engineered for precision 90° corner operations using APMT 0903 indexable inserts, offering stable performance in industrial machining contexts. 50 mm diameter, compact 40 mm overall length Internal coolant for improved chip evacuation Compatible with APMT 0903 indexable inserts Torx T8 screw drive, M2.5×5.5 fastening screw Stable geometry for repeatable corner cuts The robust 50 mm tool body provides a stable platform for 90° cuts, delivering consistent cutting geometry that reduces vibration and improves surface finish. Thanks to the head’s compact 40 mm overall length, the centre of mass is close to the holder, which aids in maintaining run-out and repeatability during batch production. This stability translates into less rework and tighter tolerances on machined edges, supporting quality-oriented workflows in production and jobbing shops. Internal coolant that enhances tool life and process reliability Integrated internal coolant channels direct cutting fluid right to the cutting zone, improving chip evacuation and cooling the insert flank. The focused coolant flow helps prevent built-up edge and reduces thermal loading on the insert, extending tool life and stabilising cutting forces. For processes where tool-change frequency impacts throughput, this coolant-assisted performance increases uptime and contributes to a more predictable machining cycle. Secure clamping and straightforward fastening Clamping relies on a Torx-driven fastening system with Torx T8 and an M2.5×5.5 screw, ensuring a reliable and repeatable seat for indexable inserts. The head accepts APMT 0903 inserts and is compatible with inserts from Korloy, enabling quick reconditioning and inventory alignment. At a mass of 0.348 kg, the unit is light enough to limit imbalance effects while being substantial enough to dampen cutting chatter. The standardised screw interface supports fast insert replacement with commonly available tools. Practical fitment and workshop advantages This tool head is intended for integration into machining setups that require a defined 90° cutting angle with indexable insert technology. The design reduces setup time through standard insert compatibility and the use of widely available Torx fixation; this simplifies spare-part logistics and operator training. For buyers looking to centralise tooling purchases, the head’s standard dimensions and mounting features support quick deployment across multiple machines and fixtures, improving operational flexibility. For reliable 90° corner machining with internal coolant, contact Metav Werkzeuge for ordering and tailored technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T240-1TM Manufacturer: Teknik Makina Product type: Corner tool head Label: 50 mm corner tool head APMT 0903 L40 mm with internal coolant Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.348 kg Cutting angle: 90° Cutting edges: 6 Special features Internal coolant Compatible with APMT 0903 indexable inserts Compatible insert manufacturer: Korloy Torx key: T8 Fastening screw: M2.5×5.5 ECLASS: 21181015 FAQ Which inserts fit this tool head? The head accepts APMT 0903 indexable inserts; inserts from Korloy are compatible and commonly used with this type of holder. Is coolant supply required for optimal performance? The built-in internal coolant significantly improves chip evacuation and tool life; operation without coolant is possible but may reduce insert life and affect surface finish. What fastening hardware is supplied for insert clamping? Clamping uses a Torx-driven screw system; the specified drive is Torx T8 with an M2.5×5.5 fastening screw for secure insert retention. Can this head be balanced for high-speed applications? The compact geometry and modest mass of 0.348 kg assist in minimising imbalance; balancing suitability depends on the complete tool assembly and machine spindle requirements. What cutting angle is provided and what does that mean for edge machining? The head has a 90° cutting angle, which is ideal where precise square shoulders or corner features are required and where a defined indexed insert orientation is beneficial. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Milling Head for APMT 11T3 Indexable Inserts L40mm With Internal Coolant - Teknik Makina
Take advantage of a compact, robust tool that combines 50 mm diameter accuracy with internal coolant for improved chip evacuation and longer insert life; the head accepts APMT 11T3 indexable inserts and features a 90° cutting angle for precise shoulder milling — order directly via Metav Werkzeuge or ask our consultants for tailored advice. 50 mm angle cutter head T252-1TM – internal coolant, for APMT 11T3 indexable inserts (Teknik Makina) The 50 mm angle cutter head T252-1TM is a compact cutting head designed for precision face and shoulder milling with APMT 11T3 indexable inserts, combining a short overall length with internal coolant to support consistent surface quality in series production 50 mm diameter for compact tool assemblies Internal coolant for improved chip control Accepts APMT 11T3 indexable inserts (Korloy) 90° cutting angle, length 40 mm Accurate machining for repeatable production results The cutter head is optimised to deliver consistent geometries in shoulder and face milling operations. With a 50 mm body and 90° cutting angle, the component provides stable cutting kinematics, while compatibility with APMT 11T3 inserts (Korloy) allows the selection of grades and geometries to match the workpiece material. The relatively short L40 mm overall length reduces overhang, lowering vibration and helping to achieve tighter tolerances in serial production runs. The robust design supports predictable tool life and repeatable set-up in workshop and industrial environments. Internal coolant and chip control enhance process reliability A routed coolant channel supplies lubricant and cooling directly to the cutting zone, which reduces thermal load at the cutting edge and improves surface finish. The presence of internal coolant assists with efficient chip control and chip evacuation, decreasing the risk of built-up edge and re-cutting. For mixed or interrupted cuts this mechanism contributes to longer insert service life and more stable cutting forces, which in turn supports higher average productive machining time and fewer unscheduled tool changes. Quick clamping and durable construction for workshop use Assembly and clamping are designed for fast, secure set-up: the head uses a T8 drive and M2.5x5.5 fastening screw for solid insert retention, while a 22 mm mounting bore matches common small-shank toolholders. The unit’s mass of 0.332 kg and the provision of six cutting edges on the chosen insert geometry ensure a balanced tool for repeated cycles. This combination of secure fastening, compact mass distribution and standardised fixing elements shortens changeover times and reduces the likelihood of insert seating errors in busy production workflows. For reliable precision machining with Teknik Makina’s angle cutter head, contact Metav Werkzeuge in Emmerich for immediate delivery options and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T252-1TM Product: Angle cutter head Brand: Teknik Makina Label: 50 mm angle cutter head APMT 11T3 L40 mm with internal coolant ECLASS: 21181015 Facts Diameter: 50 mm Total length: 40 mm Mounting bore: 22 mm Weight: 0.332 kg Cutting angle: 90° Number of cutting edges: 6 Special features Internal coolant: yes For indexable inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 Manufacturer: Teknik Makina SKU: T252-1TM FAQ Which inserts fit this cutter head? The cutter head accepts APMT 11T3 indexable inserts; Korloy grades are suitable and commonly used with the T252-1TM for a range of finishing and light roughing applications. Is coolant supplied through the tool body? Yes, the T252-1TM features internal coolant which feeds the cutting zone to aid chip evacuation and reduce cutting temperatures. What machining tasks is the head best suited for? The head is intended for precise face and shoulder milling where a 90° cutting angle and compact 50 mm diameter support repeatable edge definition and consistent surface quality. How is an insert secured and what drive is required? Inserts are clamped with the supplied screw M2.5x5.5, tightened with a T8 Torx drive to ensure secure seating and consistent clamping torque. What are the mounting and balance characteristics? The tool mounts into a 22 mm bore and weighs 0.332 kg, offering a compact, well-balanced solution for short-reach milling operations with stable cutting behaviour. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Milling Head for R390 17 Indexable Inserts L45mm Internal Coolant - Teknik Makina
Robust 50 mm corner turning head with internal coolant and compatibility with R390 17 indexable inserts ensures stable chip control and repeatable corner finishes. The compact design and 22 mm shank deliver straightforward integration into modular setups. Order the component directly via Metav Werkzeuge or consult our technical team for specification support. Corner turning head T404-1TM – 50 mm diameter, internal coolant (Teknik Makina) The Corner turning head T404-1TM is a compact indexable head for corner turning, engineered for coolant-through performance and reliable use with R390 17 inserts in demanding workshop applications 50 mm diameter for compact turning Internal coolant for improved chip evacuation Compatible with R390 17 Sandvik inserts 22 mm shank and 45 mm overall length Predictable results through coolant-through chip control The toolhead provides internal coolant directly to the cutting zone, which supports consistent chip evacuation and reduces built-up edge during interrupted cuts. With a true 90° cutting angle and support for R390 17 indexable inserts, the head secures repeatable corner geometry and surface quality. Engineers will value the combination of coolant routing and rigid seating, which together reduce rework and help maintain cycle-time stability in series production. Fast insert changes and system compatibility Designed for quick maintenance, the head uses a T15 Torx interface and M3.5x8.5 fixing screws for secure insert clamping and predictable torque values. The 22 mm connection diameter and 45 mm overall length enable straightforward integration into common modular toolholders, shortening setup time on the shop floor. At 0.591 kg the component is easy to handle while remaining robust enough for daily use, aiding efficient changeovers and minimising downtime. Built for reliable workshop performance and wide compatibility Manufactured by Teknik Makina, the T404-1TM indexable head pairs with Sandvik R390 17 inserts to cover a broad range of corner-turning tasks where stability and finish matter. The compact form factor and straightforward fixing system reduce spindle overhang, improving rigidity and tool life. Specified components and familiar interfaces simplify procurement and spare-parts planning, supporting predictable production runs and easier maintenance planning. For technical clarification or to reserve supply of the Teknik Makina corner turning head, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and order support. Technical data Article number: T404-1TM Product type: Corner turning head Brand: Teknik Makina Compatible inserts: R390 17 Compatible insert manufacturer: Sandvik Internal coolant: yes Torx key: T15 Torx screw: M3.5x8.5 Core dimensions Diameter: 50 mm Overall length: 45 mm Shank diameter: 22 mm Weight: 0.591 kg Cutting angle: 90° Cutting edges: 5 Features & compatibility Indexable head for corner turning ECLASS: 21181015 SKU: T404-1TM Label: 50mm Eckmesserkopf R390 17 L45mm mit Innenkühlung FAQ Which inserts fit this corner head? The T404-1TM corner turning head is designed for R390 17 indexable inserts and is compatible with Sandvik insert geometry. Is coolant-through available with this tool? Yes, coolant is routed through the head to the cutting zone; the internal coolant feature supports chip control and reduces edge build-up. What shank size and length should the holder accept? The head uses a 22 mm connection and has a 45 mm overall length, suitable for modular toolholder systems accepting that shank diameter. What fastening hardware is required for insert mounting? Insert clamping employs a Torx T15 interface with M3.5x8.5 fixing screws for secure mounting. Who manufactures this tool and how is it distributed? The component is manufactured by Teknik Makina and distributed via Metav Werkzeuge; SKU T404-1TM identifies the specific item. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Tool Head 90° For LNGU 15T6 Indexable Inserts, 5 Cutting Edges, 40mm Overall Length - Teknik Makina
Take advantage of a robust combination of precision, secure clamping and compact dimensions to streamline 90° turning operations; the holder’s compatibility with LNGU 15T6 inserts and simple Torx fastening reduce tool-change time and maintain process stability — order the component directly via Metav Werkzeuge or ask the consultants for application advice. Corner tool head – 90° tool head for LNGU 15T6 indexable inserts by Teknik Makina Corner tool head for 90° turning and finishing operations with LNGU 15T6 indexable inserts, designed for secure mounting and repeatable positioning in small to medium turning setups 90° cutting angle for precise corner turning Compatible with Kennametal LNGU 15T6 inserts 22 mm shank diameter for secure mounting Torx M4x11 screw, T15 key for quick clamping Faster, more reliable 90° turning for repeatable parts The Corner tool head delivers a compact solution for right‑angled turning tasks where repeatability matters. Its 90° cutting geometry ensures predictable engagement when machining shoulders or facing operations, reducing setup variation and scrap. By combining a dedicated insert format with a rigid holder design, cycle times can be optimised without sacrificing surface quality, which benefits both small-batch and series production where consistent results are required. Secure mounting and straightforward insert clamping A secure connection to the machine spindle begins with the 22 mm shank diameter, which provides stable support under load and minimises deflection. The head uses a Torx M4x11 fastening screw together with a T15 key for reliable clamp force, enabling quick insert changes while maintaining concentricity. Compatibility with Kennametal LNGU 15T6 indexable inserts simplifies inventory management and ensures access to established insert grades for different materials and cutting conditions. Compact design that supports accessibility and handling With a nominal head diameter of 50 mm and an overall length of 40 mm, the holder is designed to fit tight tool stations and to improve access in confined turning fixtures. The lightweight construction (approx. 0.305 kg) reduces inertial loads on the tool turret and makes manual handling easier during tool setup. The head provides five cutting edges, allowing for efficient use of the insert geometry and predictable wear cycles, which contributes to lower tooling cost per part over time. Practical applications and workshop suitability This tool head is tailored for workshop environments that require dependable corner turning, facing and light profiling where LNGU 15T6 inserts are preferred. Its straightforward interface with common insert types and standard Torx clamping fits the needs of maintenance departments, contract workshops and small production lines. For processes requiring repeatability and reduced setup complexity, the holder offers a pragmatic balance of rigidity, ease of service and compatibility with established insert ranges. For technical clarification, application advice or to request a tailored supply from Metav Werkzeuge — quoting SKU T956TM and Teknik Makina — contact the Metav team and benefit from their precision expertise and fast, reliable fulfilment Technical data Article number: T956TM Manufacturer: Teknik Makina Designation: Eckmesserkopf For: LNGU 15T6 indexable inserts Core technical data Shank diameter: 22 mm Head diameter: 50 mm Overall length: 40 mm Cutting angle: 90° Cutting edges: 5 Weight: 0.305 kg Special features Compatible insert manufacturer: Kennametal Torx screw: M4x11 Torx key: T15 ECLASS: 21181015 FAQ What insert type does the head accept? The holder accepts LNGU 15T6 indexable inserts; it is supplied to suit that insert geometry and is compatible with Kennametal grades. Which fastener is used to secure the insert? Insert retention is via a Torx M4x11 screw tightened with a T15 key to ensure firm and repeatable clamping. What are the key dimensions for machine setup? Relevant dimensions are a 22 mm shank diameter, 50 mm head diameter and 40 mm overall length; the technical drawing or the SKU T956TM specification should be checked against turret clearances. Is the head suitable for tight tool stations? Yes; the compact form factor and lightweight design make the head well suited to constrained tool positions and close‑quarter turning setups. How many cutting edges are provided by the insert arrangement? The configuration supports five effective cutting edges per insert cycle, enabling efficient index changes and predictable wear scheduling. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Tool Head 90° For LNHU 1306 Indexable Inserts, M4x10 Torx T15 - Teknik Makina
Benefit from a compact, high-precision 90° indexable-insert head that combines secure M4x10 Torx fixation, compatibility with Walter LNHU 1306 inserts and a compact 22 mm mounting for minimal set-up changes — order directly via Metav Werkzeuge or consult our specialists for application support. Corner tool head T580TM — 90° indexable-insert turning head by Teknik Makina, compatible with LNHU 1306 The Corner tool head T580TM is a compact 90° indexable-insert turning head designed for reliable external turning and facing operations with Walter LNHU 1306 inserts 90° cutting angle for right-angle turning Compatible with Walter LNHU 1306 inserts 22 mm mounting shank for compact holders Secure M4x10 fixation, Torx T15 key Precision turning where space is limited The 90° geometry delivers fast, repeatable shoulder turning and facing operations while avoiding multiple re‑setups. The combination of a 90° cutting angle and support for indexable inserts means toolpaths remain predictable and clamping forces are directed through the head, reducing vibration and improving surface finish. This leads to measurable cycle‑time savings on short, repetitive cuts and helps maintain consistent part tolerances across production batches. Confident clamping and straightforward insert changes A robust M4x10 fastening screw operated with Torx T15 ensures secure seat retention under heavy cuts and simplifies routine maintenance. The Torx drive reduces cam‑out and allows repeatable torque application, which protects the insert pocket and limits the need for rework. Quick indexability of the insert reduces machine downtime and supports efficient shift changes for continuous production. Compact design for versatile machine setups With a 50 mm head diameter and 40 mm overall length, the head occupies little envelope space while maintaining sufficient rigidity for stable cutting. The 22 mm mounting facilitates compatibility with compact toolposts and driven tool adaptors, enabling integration into small lathes and multi‑spindle machines. At 0.35 kg the component is light enough to aid balance and reduce spindle load when used in multiple stations. Durable construction and consistent performance Manufactured with high-quality metal processing, the head is built to resist wear and to deliver a long service life, supporting predictable tool replacement intervals. The unit accommodates five cutting edges, enabling multiple index positions before replacement and contributing to lower tooling costs per part. Together with proven insert standards from Walter, this configuration supports dependable production runs and reproducible results. Contact Metav Werkzeuge for tailored procurement advice and secure supply of the Teknik Makina Corner tool head T580TM with Walter LNHU 1306 compatibility Technical Data SKU: T580TM Brand: Teknik Makina Product: Corner tool head for LNHU 1306 indexable inserts Fixing screw: M4x10 Torx key: T15 Dimensions & Core Data Head diameter: 50 mm Overall length: 40 mm Mounting bore / shank: 22 mm Weight: 0.35 kg Cutting angle: 90° Features & Compatibility Compatible with Walter LNHU 1306 inserts Number of cutting edges: 5 High-quality metal processing Long service life FAQ What inserts fit this head? The T580TM corner tool head is compatible with Walter LNHU 1306 indexable inserts, providing standardised seating and repeatable clamping. Which mounting size is required for installation? The head requires a 22 mm mounting bore and is designed for compact holders; ensure the toolpost accepts a 22 mm shank before fitting the T580TM. What fastening hardware is used to secure the insert? Insert clamping uses an M4x10 screw with a Torx T15 drive; the Torx interface reduces cam‑out and enables consistent torque application. Is the head suitable for heavy roughing cuts? The robust fixation and compact geometry support stable turning; for sustained heavy roughing, verify machine spindle power and holder rigidity for the intended application with the T580TM. How many index positions are available before insert replacement? The design accommodates five cutting edges, allowing multiple index positions and extending time between replacements for efficient production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Tool Head ADKT 1706 L40mm With Internal Coolant, 90° - Teknik Makina
Take advantage of a compact, rigid turning solution that combines internal coolant and a 50 mm head diameter for stable, high-quality finishes; order the tool via Metav Werkzeuge or consult our specialists for application advice. Corner tool head — 50 mm with internal coolant for ADKT 1706 indexable inserts by Teknik Makina Corner tool head for short overhang turning and grooving operations using ADKT 1706 indexable inserts, designed for workshop efficiency and coolant-assisted machining. Internal coolant for stable cutting 50 mm head diameter for rigid setup Compatible with ADKT 1706 Korloy inserts 90° cutting angle for versatile geometries Increased rigidity for consistent surface finish The compact design with a 50 mm head diameter and overall length L40 mm reduces overhang and vibration, enabling a more consistent surface finish in short-reach turning tasks. The reduced mass and balanced geometry contribute to repeatable chip formation and lower tool deflection, which translates into fewer reworks and improved process reliability. This makes the tool head particularly suited to operations where dimensional stability under load is essential. Coolant routing that extends insert life and improves chip control Integrated internal coolant channels deliver cutting fluid directly to the cutting zone, improving lubrication and chip evacuation. Targeted coolant reduces thermal load on the insert, which helps to preserve edge integrity and extends time between index changes. For workshops seeking to lower tooling costs per component, the coolant-assisted performance provides a measurable improvement in tool life and cutting consistency. Fast, reliable insert clamping for efficient shop workflows Designed for the ADKT 1706 insert family, the head accepts standard Korloy inserts and secures them with a M4x10 Torx screw (Torx T15). This familiar fastening method simplifies insert changes and minimises downtime during production swaps. The configuration supports straightforward maintenance procedures and keeps the toolholder ready for quick reconditioning at the bench. Practical characteristics for everyday CNC turning With five cutting-edge contacts and a 90° cutting angle, the head accommodates a range of turning geometries while preserving a compact envelope. The lightweight construction (approx. 0.285 kg) lowers rotating mass and supports responsive machine dynamics during feed and acceleration changes. Together, these features deliver a balance of agility and control that benefits small-batch production and mixed-series workshop environments. For applications that require targeted coolant performance and a compact, robust turning solution, request the Teknik Makina Corner tool head T590TM through Metav Werkzeuge — our consultants in Emmerich will advise on suitability and integration into existing setups. Technical data Article number: T590TM Manufacturer: Teknik Makina Product type: Corner tool head eClass: 21181015 Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.285 kg Cutting angle: 90° Cutting-edge contacts: 5 Special features Internal coolant For ADKT 1706 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 FAQ Which inserts are compatible with this tool head? The Corner tool head accepts ADKT 1706 indexable inserts; the head is commonly paired with Korloy ADKT 1706 inserts for reliable clamping and performance. Does the tool head provide internal coolant? Yes — the head features internal coolant channels that deliver fluid directly to the cutting zone to improve insert life and chip evacuation. What fastening is required for insert changes? Insert clamping uses a M4x10 Torx screw with a T15 key, enabling quick and standardised insert replacement on the T590TM corner tool head. What cutting geometries are supported? The head offers a 90° cutting angle and five contact points, suitable for a variety of profiling and shoulder-turning tasks that benefit from a compact tool envelope. Is the tool head suitable for short overhang applications? Yes — with a 50 mm head diameter and L40 mm overall length, the design is optimised for rigid, short-reach turning where vibration control and stability matter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Tool Head ANKX 1205 L45mm Internal Coolant, 90° Cutting Angle - Teknik Makina
A robust solution for precise shoulder milling: the combination of a 50 mm head diameter, a 90° cutting angle and internal coolant delivers stable, repeatable cuts and extended insert life; order the corner milling head directly via Metav Werkzeuge or consult the technical advisors for integration advice. Corner milling head (Eckmesserkopf) — 50 mm, internal coolant, for ANKX 1205 indexable inserts by Teknik Makina A corner milling head designed for accurate shoulder and slot work in industrial turning and milling centres, compatible with ANKX 1205 indexable inserts for reliable chip control and production-grade rigidity 50 mm head diameter Internal coolant for controlled chip evacuation Compatible with ANKX 1205 indexable inserts Torx T15 screw M4x10 for secure clamping High-performance shoulder milling with consistent results Engineered to deliver stable shoulder cuts, this cutter head combines a 50 mm diameter with a 90° cutting angle and five cutting edges to ensure consistent engagement and reduced vibration. The relatively compact 45 mm overall length balances reach with rigidity, minimising deflection during interrupted cuts. The result is predictable dimensional accuracy and a surface finish that supports downstream processes, reducing rework and improving cycle-time reliability. Operators and production planners gain a measurable performance uplift in repeatability and tool life when replacing worn tooling with this configuration. Keeping tools cool and extending insert life The integrated internal coolant channel directly supplies coolant to the cutting zone, improving chip evacuation and thermal control at the insert interface. This targeted cooling reduces thermal load on the insert, which in turn slows wear mechanisms and helps maintain cutting-edge geometry for longer periods. Compatibility with ANKX 1205 inserts allows for a wide range of grade and geometry choices, so the assembly can be optimised for tougher materials or high-speed operations without sacrificing process stability. Less frequent insert changes and reduced scrap contribute to a leaner production footprint. Fast, secure clamping for efficient changeovers Clamping integrity is provided via a Torx T15 drive and an M4x10 screw, offering secure fixation with a conventional workshop toolset. The straightforward screw interface simplifies insert replacement and reduces downtime during scheduled maintenance or grade changes. Designed to accept inserts from ISCAR, the head supports commonly used tooling specifications, enabling quick tooling standardisation across machines. The secure clamping also minimises micro-movement at the cutting edge, which benefits dimensional control and repeatable cycle times in mass-production environments. Robust design for seamless workshop integration Manufactured by Teknik Makina, the head is dimensioned and weighted to suit industrial toolholders and rigourous machining schedules—the unit weight of 0.433 kg contributes to a balanced spindle load while the overall geometry supports stable chip flow. The combination of proven mechanical fixation, internal coolant capability and broad insert compatibility makes this component suitable for series production as well as smaller job-shop batches where reliability matters. The configuration reduces process risk and helps maintain throughput without complex retrofitting. For dependable shoulder milling with precise coolant delivery, contact Metav Werkzeuge to arrange supply or discuss specification matching for Teknik Makina corner milling head SKU T572-1TM — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T572-1TM UID: T572-1TM eClass: 21181015 Label: 50mm Eckmesserkopf ANKX 1205 L45mm mit Innenkühlung Product type: Eckmesserkopf For indexable inserts: ANKX 1205 Compatible insert manufacturer: ISCAR Manufacturer: Teknik Makina Core dimensions Diameter: 50 mm Overall length: 45 mm Weight: 0.433 kg Cutting angle: 90° Number of cutting edges: 5 Torx screw: M4x10 Torx key: T15 Internal coolant: yes Special features Compatibility with ANKX 1205 indexable inserts Designed for shoulder and slot milling Secure Torx clamping system Manufacturer: Teknik Makina Category path: Zerspanen › Eckmesserkopf FAQ Which indexable inserts fit this head? This corner milling head is designed for ANKX 1205 indexable inserts and accepts inserts from ISCAR as specified for the Teknik Makina unit (SKU T572-1TM). Does the head provide internal coolant to the cutting edge? Yes, the tool features internal coolant, directed to the insert interface to improve chip evacuation and extend insert life on the Teknik Makina corner milling head. What clamping hardware is used for insert fixation? Insert fixation uses a Torx T15 drive with an M4x10 screw to secure the insert reliably on the machining head (SKU T572-1TM). Is the head suitable for heavy interrupted cuts? The combination of a 50 mm diameter, 90° cutting geometry and secure Torx clamping provides the rigidity required for many interrupted and shoulder milling applications with reproducible results. How does this head integrate with existing toolholders? With a compact 45 mm overall length and an industry-standard insert interface, the cutter head can be integrated into common holders and setups; the Teknik Makina design supports straightforward replacement of existing corner milling solutions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Tool Head ANKX 1607 Indexable Inserts L40mm Internal Coolant - Teknik Makina
Take advantage of the combination of rigid design, internal coolant and broad insert compatibility for reliable shoulder milling and repeatable cycle times. Order the tool or consult Metav Werkzeuge for specification support and delivery coordination. Corner Milling Head T171-1TM — 50 mm diameter, internal coolant (Teknik Makina) A Corner Milling Head T171-1TM engineered for ANKX 1607 indexable inserts, providing stable 90° shoulder milling and efficient chip evacuation in CNC turning and milling setups. 50 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with ANKX 1607 inserts T15 Torx clamping for secure fixation Consistent rigidity for repeatable surface quality The compact 50 mm diameter combined with a total length of 40 mm results in a stiff tool geometry that reduces vibration and deflection during shoulder and face milling. Improved stiffness directly translates to consistent surface finish and tighter dimensional repeatability on series parts, which reduces downstream rework. The unit mass of 0.307 kg supports quicker spindle acceleration and stabilises tool behaviour during interrupted cuts, making the holder suitable for mixed production batches where cycle reliability matters. Internal coolant that extends insert life and improves process stability Integrated internal coolant supplies cutting fluid directly at the cutting zone, which assists cooling and chip control in demanding operations. Direct coolant reduces cutting temperatures and aids chip breaking, lowering the thermal load on the insert and thereby extending tool life. For operators and process engineers, this means fewer tool changes per shift and more predictable tool-change intervals, supporting higher machine uptime and reduced tooling cost per part. Broad insert compatibility and economical tool management Designed specifically for ANKX 1607 indexable inserts, the head accepts inserts from established manufacturers XTC and Gesac, offering flexibility when sourcing consumables. Each insert provides multiple cutting edges, and with four effective cutting edges available the overall tooling cost per edge is minimised. The 90° cutting angle is optimised for shoulder operations and square-corner features, while the T15 Torx clamping interface ensures a repeatable and secure clamping force for every index and change. Easy integration into production workflows The tool head is supplied as SKU T171-1TM and is ready for direct mounting in common modular holders used in turning and milling spindles. Its compact form and internal coolant capability support both high-feed finishing passes and medium-depth semi-finishing strategies. Clear specification of the head’s key parameters—50 mm diameter, 40 mm overall length, four cutting edges and internal coolant—simplifies CAM programming and tooling lists, enabling faster process setup and effective replacement planning in the tool crib. Contact Metav Werkzeuge to discuss how the Teknik Cutting Tools corner milling head fits into the production setup, request compatibility checks or arrange priority delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T171-1TM Type: Corner milling head For inserts: ANKX 1607 Brand: Teknik Makina Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.307 kg Cutting edges: 4 Cutting angle: 90° Torx key: T15 Special features Internal coolant: yes Compatible insert manufacturers: XTC, Gesac Indexable insert system: ANKX 1607 FAQ Which insert type is required for this tool head? The corner milling head is designed for ANKX 1607 indexable inserts; inserts from XTC and Gesac are compatible with the T171-1TM. Does the tool head provide coolant supply to the cutting zone? Yes, the T171-1TM features internal coolant to improve cooling and chip evacuation at the cutting edge. What cutting tasks is the head best suited for? The head is optimised for 90° shoulder milling and face milling where a stiff 50 mm diameter tool improves surface finish and dimensional stability. How is the insert secured in the head? Clamping is effected via a T15 Torx interface, ensuring a secure and repeatable fixation for each insert index. Can the head be used for finishing and semi-finishing passes? The tool head’s geometry and coolant capability make it suitable for both medium-depth semi-finishing and finishing strategies, delivering stable results in mixed production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Corner Tool Head ANKX 1706 For Indexable Inserts With Internal Coolant, 90° - Teknik Makina
Benefit from the combination of a 50 mm diameter for process stability, internal coolant for improved tool life and direct compatibility with ANKX 1706 indexable inserts for rapid changeovers; order via Metav Werkzeuge or consult our advisors for specification support. Corner tool head for ANKX 1706 indexable inserts — 50 mm, internal coolant (Teknik Makina) Corner tool head designed for external turning operations with ANKX 1706 indexable inserts, offering internal coolant and a compact 45 mm overall length for stable, high-precision machining. 50 mm diameter for stable cutting Internal coolant for efficient chip evacuation Compatible with ANKX 1706 inserts (ISCAR) Four cutting edges, 90° cutting angle Enhanced process stability through rigid geometry The solid construction and 50 mm diameter provide a rigid clamping base that reduces vibration and improves surface finish during shoulder and facing operations. By combining a compact 45 mm overall length with a balanced mass (approx. 0.371 kg), the head minimises overhang while maintaining necessary clearance for common turning tasks. This rigidity translates into consistent tolerances and fewer re-cuts, supporting lean production and predictable cycle times. Effective coolant delivery for longer tool life Integrated internal coolant supplies cutting fluid directly to the insert zone, supporting better chip control and lower cutting temperatures. This targeted cooling reduces thermal wear on the insert and the tool seat, extending the life of both the head and ANKX 1706 tips. For production environments where downtime is costly, the improved heat management leads to longer intervals between indexings and tool changes, increasing overall equipment effectiveness. Fast insert changes and broad compatibility The head accepts ANKX 1706 indexable inserts and is specified to suit ISCAR systems, enabling compatibility with widely used insert portfolios. The fixing is executed with an M5x12 Torx screw and a T20 Torx drive for secure seating and straightforward replacement. This arrangement ensures repeatable positioning of the insert, reducing set-up time and simplifying inventory management when standardised inserts are used across multiple toolholders. Compact, reliable design for daily production demands Designed by Teknik Makina, the unit combines a compact footprint with four workable cutting edges and a 90° cutting angle to handle common shoulder and contouring operations efficiently. The robust screw retention and precise seat geometry keep the insert stable under load, supporting reproducible machining results and reducing the risk of chatter. For workshops aiming to balance flexibility with durability, this head delivers dependable performance over many cycles. Select the Teknik Makina T442-1TM corner tool head with internal coolant to improve cycle consistency and reduce indexings — contact Metav Werkzeuge for tailored technical advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T442-1TM SKU: T442-1TM Product type: Eckmesserkopf Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 45 mm Weight: 0.371 kg Cutting edges: 4 Cutting angle: 90° Special features Internal coolant For ANKX 1706 indexable inserts Compatible insert manufacturer: ISCAR Torx screw: M5x12 Torx key: T20 Eclass: 21181015 FAQ What inserts fit this head? The head is configured for ANKX 1706 indexable inserts and is compatible with ISCAR-standard inserts specified for that geometry; the T442-1TM accepts the same insert type without modification. Does the tool support through‑tool coolant? Yes, the model features internal coolant, delivering fluid directly to the cutting zone to aid chip evacuation and thermal control. What fastener is used to secure the insert? Inserts are clamped with an M5x12 Torx screw using a T20 drive for secure seating and repeatable positioning. Which applications suit this tool head best? The unit is ideal for shoulder turning and finishing operations where a 90° cutting angle and robust support are required for consistent surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com