Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
80mm Indexable Turning Head 90° For SPMG 0904 Indexable Inserts, 7 Cutting Edges, 27mm Shank - Teknik Makina
Take advantage of the compatibility with SPMG 0904 indexable inserts and a true 90° cutting angle for reliable corner operations; secure fastening via a M3.5x8.5 Torx screw and compact dimensions support quick changeovers. Order the corner tool head directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head T342TM — for SPMG 0904 indexable inserts, 90° cutting angle (Teknik Makina) The Corner tool head is a compact turning head designed for use with SPMG 0904 indexable inserts, intended for precision cornering and face-turning tasks in small-batch and job-shop environments. For SPMG 0904 indexable inserts 90° cutting angle for accurate cornering Ø 80 mm head diameter 27 mm shank diameter Precision and compatibility for consistent turning results The T342TM corner tool head is designed around the widely used SPMG 0904 insert form to deliver repeatable edge engagement and controlled chip formation. The 90° cutting angle ensures that the cutting edge meets the workpiece at a defined geometry, which simplifies tool path planning and reduces the need for compensatory adjustments. This focus on fixed geometry supports efficiency on small-series parts where setup time has a direct impact on cost per piece. The compact tool design incorporates established insert standards, so familiar insert grades and coatings can be deployed without additional tooling investment. Robust mounting and service-friendly fastening A secure connection is provided by the 27 mm shank and a standard Torx clamping system, which is optimised for workshop turnaround. The 27 mm diameter shank gives a stable axial fit in compatible toolholders, while the clamping screw specification (M3.5x8.5) and the T15 driver allow fast replacement of inserts and straightforward maintenance. Because replacement is quick and repeatable, set-up times are reduced and tool downtime is minimised — a practical benefit for production shops where uptime drives throughput. Balanced dimensions for controlled chip removal and stability The tool head’s Ø 80 mm diameter and overall length of 52 mm create a compact centre of mass that improves rigidity during shoulder and face operations. The unit weight (1.088 kg) contributes to a well-damped assembly when installed in standard holders, helping to avoid chatter in many typical machining conditions. The design accommodates 7 cutting edges on the head assembly, which aids in distributing cutting forces and supports consistent surface finish over repeated cycles. These dimensional choices were made to favour steadiness over extreme outreach, making the head suitable where stability and predictable performance are priorities. Application scenarios and specification guidance This corner tool head is a practical choice for workshops and contract manufacturers working with square inserts from recognised brands such as Taegutec. The unit is supplied as a compact turning head that pairs with standard indexable inserts, so component programmers and tooling buyers can specify it by its SKU, T342TM, when planning inventories. For buyers seeking a reliable supply route and technical advice, Metav’s distribution offers a quality filter for the European market and can support selection of insert grades and coatings to match particular workpiece materials. For specification, availability and supply from Metav Werkzeuge in Emmerich, request a detailed parts and compatibility consultation referencing the T342TM corner tool head — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to arrange prompt support and delivery. Technical data Article number: T342TM Name: Corner tool head Brand: Teknik Makina Compatible inserts: SPMG 0904 Compatible insert manufacturer: Taegutec Numbers / Core technical data Head diameter: 80 mm Shank diameter: 27 mm Overall length: 52 mm Weight: 1.088 kg Cutting angle: 90° Cutting edges: 7 Special features / Versions Torx screw: M3.5x8.5 Torx key size: T15 For SPMG 0904 indexable inserts Compact turning/cornering head design SKU: T342TM FAQ What insert size does this head accept? The head accepts SPMG 0904 indexable inserts, a square-format insert commonly used for cornering and face-turning operations. Which toolholder shank is required for mounting? A toolholder able to accept a 27 mm shank is required; the shank diameter is specified as 27 mm on the T342TM unit. How is the insert secured to the head? The insert is secured using a Torx clamping screw specified as M3.5x8.5; a T15 driver is recommended for tightening. Is the head compatible with Taegutec inserts? Yes, the T342TM is specified as compatible with inserts from Taegutec listed under SPMG 0904. What are the main dimensional constraints to check before ordering? Confirm the Ø 80 mm head diameter and overall length (52 mm) fit the intended clearance envelope and that the toolholder accepts a 27 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Turning Head 90° For XNKT 0604 Inserts, M3x7 Torx T8 - Teknik Makina
Take advantage of a robust 90° indexable tool head combining a standard 27 mm shank with secure Torx clamping for stable corner turning and reduced setup times. Order directly via Metav Werkzeuge or consult our specialists for application advice and delivery from Emmerich. Eckmesserkopf — 90° indexable tool head for XNKT 0604 inserts by Teknik Cutting Tools The Eckmesserkopf is a 90° indexable tool head designed for precise corner turning and shoulder work with XNKT 0604 indexable inserts in general workshop and production turning operations 90° cutting angle for precise corner turning Compatible with XNKT 0604 indexable inserts 27 mm shank diameter for standard mounts Torx M3x7 clamp screw for secure fixing Precision corner turning with proven cutting geometry The 90° cutting geometry delivers a reliable solution for machining sharp shoulders and external corners, ensuring repeatable results on each workpiece. Built to accept XNKT 0604 indexable inserts, the head allows quick insert changes while preserving process stability. The design reduces the need for regrinding and complicated set-ups, enabling shorter cycle times and consistent profile accuracy across batches. For operations where tolerances matter, the combination of a defined cutting angle and indexable tooling supports predictable component quality. Secure mounting and mechanical stability that reduces vibration A 27 mm shank and an overall length of 50 mm create a compact, rigid connection to the holder, improving chatter resistance during turning. The head’s 80 mm diameter contributes to mass and damping, while the Torx clamping arrangement — M3x7 clamp screw with T8 interface — ensures a positive, repeatable fixation of the insert seat. At approximately 0.938 kg, the unit balances inertia and handling convenience, making it easier to position and tighten without compromising stability. These construction choices translate into improved surface finish and reduced scrap rates in production runs. Compatibility and operational efficiency for workshop use Designed for compatibility with Korloy-type inserts and specifically for the XNKT 0604 geometry, the tool head supports common insert inventories and simplifies procurement. The availability of multiple cutting edges (ten in the specified configuration) lowers the frequency of full-tool exchanges and helps sustain machining uptime. Intended for serial turning and finishing passes, the component integrates with existing indexable-insert workflows to deliver quick insert indexing, straightforward maintenance and lower overall tool management effort, making it suitable for both jobbing shops and in-house production departments. For a reliable 90° indexable tool head from Teknik Cutting Tools and support tailored to the application, contact Metav Werkzeuge for expert advice and supply from Emmerich. Technical Data SKU: T856TM Manufacturer: Teknik Makina Product: Eckmesserkopf — for XNKT 0604 indexable inserts Facts Shank diameter: 27 mm Weight: 0.938 kg Cutting angle: 90° Head diameter: 80 mm Overall length: 50 mm Number of cutting edges: 10 Clamp screw: M3x7 Torx key size: T8 Special features Compatible insert type: XNKT 0604 Compatible insert manufacturer: Korloy Application: corner turning, shoulder machining FAQ What insert type is required for this tool head? The Eckmesserkopf accepts XNKT 0604 indexable inserts; Korloy XNKT 0604 geometry is specified for correct fit and performance. Which shank size is used for mounting? Mounting is achieved with a 27 mm shank diameter, offering compatibility with standard tool holders designed for that dimension. How is the insert secured in the head? The insert is clamped using a Torx M3x7 clamp screw; the matching torx key size is T8 for tightening. Is the head suitable for heavy-duty turning operations? With a robust 80 mm head diameter and a mass of about 0.938 kg, the tool head provides good damping and stability for many turning tasks, especially shoulder and corner machining. How does the 90° geometry benefit production processes? The 90° cutting angle simplifies shoulder creation and profiling, improving repeatability and reducing set-up adjustments in serial production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Turning Head for 90° LOEX 1207 Indexable Inserts, M4x10 T15 - Teknik Makina
Take advantage of a rigid, industry-ready turning solution that pairs precision 90° geometry with direct compatibility for LOEX 1207 indexable inserts, enabling consistent shoulder finishes and reduced setup time; order via Metav Werkzeuge or consult our technical team for application support. Corner Tool Head T588TM — 90° turning head for LOEX 1207 indexable inserts by Teknik Makina The Corner Tool Head T588TM is a 90° turning head designed for LOEX 1207 indexable inserts, built for accurate external turning, facing and shoulder operations in general workshop and industrial turning applications 90° cutting angle for precise shoulder cuts Compatible with LOEX 1207 indexable inserts by SECO 27 mm tool holder shank diameter Torx fixing M4x10 with T15 drive Head Ø80 mm, overall height 50 mm, weight 1.03 kg Accurate shoulder machining with repeatable results This turning head features a 90° cutting geometry that delivers clear, square shoulders with minimal rework. By accepting LOEX 1207 indexable inserts, the head provides the advantage of fast insert replacement and consistent cutting edges without the need for regrinding; indexable inserts are replaceable carbide plates that rotate to fresh edges, which reduces downtime and keeps cycle times predictable. The head's geometry is especially beneficial where right-angled shoulders and stepped diameters are frequent, as a single set-up now produces repeatable results and reduces downstream finishing operations. Rigid mounting and straightforward serviceability Rely on a stable toolholder configuration: the head mounts on a 27 mm shank and uses a Torx M4x10 clamping screw with T15 drive for secure insert fixation and quick servicing. The combination of a 27 mm shank and a head mass of 1.03 kg increases stiffness at the cutting zone, reducing chatter and improving surface finish. Maintenance is simplified by the Torx connection, which allows controlled torque and fast, repeatable insert changes, so wear is managed without lengthy machine downtime. Compact design for effective integration and productivity With a head Ø80 mm and overall height of 50 mm, the holder balances compactness and rigidity to fit many toolposts while maintaining clearance for complex part geometries. The unit lists seven cutting edges, which supports extended tool life through indexed insert rotation and reduces the frequency of replacement—translating into measurable productivity gains on batch work. Compatibility with SECO-style inserts ensures easy sourcing from standard suppliers and smooth integration into existing tooling systems, enabling cost-efficient upgrades to turning capacity. For application recommendations or to place an order for the Teknik Makina Corner Tool Head T588TM, contact Metav Werkzeuge for tailored advice and supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T588TM E-class: 21181015 Manufacturer: Teknik Makina Facts Shank diameter: 27 mm Head diameter: 80 mm Overall height: 50 mm Weight: 1.03 kg Cutting angle: 90° Cutting edges: 7 Special features Compatible inserts: LOEX 1207 (SECO) Torx screw: M4x10 Torx key size: T15 SKU: T588TM Files available: 66c4a4ca2a22f06ba2d88a20, 66c4a4caacd42255e1a26153 FAQ Is this head compatible with SECO LOEX 1207 inserts? Yes. The Corner Tool Head T588TM is designed for LOEX 1207 indexable inserts and is compatible with inserts supplied under the SECO system. What shank size is required for mounting? The turning head uses a 27 mm shank diameter; ensure the toolpost or holder accepts a 27 mm shank for secure mounting. Which screw and driver are required for insert clamping? Insert clamping is secured with a Torx M4x10 screw; a T15 Torx driver is specified for controlled tightening. What applications suit this turning head best? The head is optimised for external turning, facing and square shoulder machining where a 90° geometry improves repeatability and finish quality. How does the design affect vibration and finish? The combination of a 27 mm shank, Ø80 mm head and a mass of 1.03 kg increases rigidity at the cutting point, which helps to reduce vibration and improve surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Indexable Turning Head for ADKT 10T3 With Internal Coolant, 90° Cutting Angle - Teknik Makina
Take advantage of the combination of 80 mm diameter, internal coolant and a precise 90° cutting angle to improve process stability and reduce rework; order the corner tool head directly via Metav Werkzeuge or consult the technical team for application advice. Corner tool head for ADKT 10T3 indexable inserts — 80 mm, internal coolant (Teknik Makina) Corner tool head for shoulder and profiling operations, compatible with ADKT 10T3 indexable inserts and designed for robust machining in production environments Large 80 mm diameter for robust engagement Integrated internal coolant for improved chip control Compatible with ADKT 10T3 indexable inserts Secure Torx T8 fastening with M2,5x5,5 screws Precision and stability for reliable shoulder machining The combination of the 80 mm diameter and a compact 50 mm overall length produces a rigid tooling solution that reduces vibration during shoulder turning and facing operations. The 90° geometry delivers consistent square shoulders with minimal secondary machining, while the distribution of the eight cutting edges helps to spread cutting forces and extend the life of each indexable tip. By using an indexable system, maintenance becomes straightforward: worn tips are rotated or replaced without single-point regrinding, which shortens downtime and increases throughput. Coolant-through design that improves tool life and surface quality Built with internal coolant, the head directs coolant close to the cutting zone to aid chip evacuation and heat control. This targeted cooling reduces thermal load on the insert’s cutting edge, which can postpone edge chipping and crater wear and thus lengthen insert life. For customers unfamiliar with the term: internal coolant (coolant-through) means the coolant is channelled through the tooling body and delivered at the insert seat, enhancing lubrication and flushing chips away from the cutting zone for improved surface finish and process reliability. Fast, repeatable set-up and secure fastening Assembly and insert clamping are simplified by the Torx system: the head uses a T8 Torx key and M2,5x5,5 fastening screws for consistent torque and repeatable seating. Compatibility with Korloy ADKT 10T3 inserts ensures easy sourcing of tips and proven cutting grades for a wide range of steels. At 0.88 kg, the head balances mass for stability without excessive load on the toolholder; the compact design supports quick tool changes and predictable repeatability in series production. Where this head generates the most value on the shop floor This tooling head excels where square shoulders, tight tolerances and economic insert usage are required: small-batch production, toolroom rework, and medium-series turning. The ADKT 10T3 interface enables flexible grade selection for steel, alloy and general-purpose turning tasks, while internal coolant and robust fastening reduce unexpected stops. For procurement teams, the head offers a straightforward route to improved cutting consistency without complex adaptation of existing holders. For a direct technical match and to secure the Teknik Makina corner tool head with internal coolant, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application specifics and delivery options. Technical data Article number: T700TM SKU: T700TM Product type: Corner tool head Brand: Teknik Makina Label: 80mm Eckmesserkopf ADKT 10T3 L50mm mit Innenkühlung Facts Diameter: 80 mm Overall length: 50 mm Weight: 0.88 kg Cutting angle: 90° Cutting edges: 8 Torx key: T8 Torx screw: M2,5x5,5 ECLASS: 21181015 Special features Internal coolant (coolant-through) For ADKT 10T3 indexable inserts Compatible insert manufacturer: Korloy Secure Torx fastening for repeatable assembly FAQ What insert type does this head accept? The head is designed for ADKT 10T3 indexable inserts and is specified for use with Korloy insert variants. Does the tooling head provide coolant-through capability? Yes, the corner tool head features internal coolant to improve chip evacuation and cooling at the cutting edge. Which fastening method is used for the inserts? Insertion is secured with a Torx system; the head requires a T8 key and uses M2,5x5,5 screws for repeatable clamping. Is this head suitable for producing square shoulders? The 90° cutting angle and robust 80 mm diameter make the head well suited to accurate shoulder and profile turning. Can the head be used with inserts from other manufacturers? The tooling head is specified for ADKT 10T3 inserts; compatibility with other brands depends on the exact insert geometry but Korloy ADKT 10T3 are confirmed. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Planing Cutter Head 75° For SPKN 1203 Indexable Inserts 6 Inserts, 27mm Mount - Teknik Makina
Combining a 75° cutting geometry with a robust Ø 80 mm body and six indexable edges provides stable, repeatable facing and reduced downtime; the 27 mm shank adds secure mounting for heavy cuts. Order the face milling head directly via Metav Werkzeuge or ask our consultants if needed Face milling head T152TM — for SPKN 1203 indexable inserts, 75° cutting angle (Teknik Makina) A face milling head engineered for reliable facing and finishing with SPKN 1203 indexable inserts, suitable for production and workshop environments. Face milling head for SPKN 1203 inserts 75° cutting angle for flat surfaces Ø 80 mm with six cutting edges 27 mm shank, robust 1.26 kg construction Stable, accurate facing for repeatable results The tool’s 75° cutting angle and compact diameter deliver a stable cutting geometry that supports consistent surface quality across repeated jobs. With six cutting edges, the system lengthens productive cutting time between indexings and lowers the frequency of tool changes, which directly improves machining throughput. The combination of the compact Ø 80 mm body and the defined cutting geometry reduces vibration and helps achieve a uniform finish on facing operations, making the assembly particularly suited to tasks where a flat, even surface is required. Efficient insert system that reduces downtime and handling Designed for SPKN 1203 indexable inserts, the head accepts widely used insert types, simplifying procurement and stock management. Mounting and service are straightforward thanks to the delivered fasteners (M8x24-L) and standard 5 Allen tool engagement, enabling rapid insert changes and secure clamping. The 27 mm shank ensures positive locating in the toolholder, translating into reliable runout characteristics and repeatable positioning for each index. These features together reduce non-productive time and support predictable cycle planning in a busy production schedule. Workshop-ready construction and clear handling benefits At 1.26 kg overall weight and a compact overall length 55 mm, this cutter head balances rigidity and manoeuvrability for manual set-up and CNC applications alike. The design concentrates mass close to the spindle, aiding stable cutting under moderate loads while the modular insert principle keeps long‑term running costs down: worn inserts are replaced rather than the entire head. For those new to indexable tooling, indexable inserts are replaceable cutting tips that permit quick renewal of the cutting edge without regrinding, which simplifies maintenance and reduces tooling waste in the long run. For reliable facing performance choose the Teknik Makina T152TM face milling head — contact Metav Werkzeuge in Emmerich for tailored technical advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T152TM Name: Face milling head (Planmesserkopf) Brand: Teknik Makina eClass: 21180902 Facts Diameter: 80 mm Shank diameter: 27 mm Cutting angle: 75° Number of cutting edges: 6 Overall length: 55 mm Weight: 1.26 kg Fastener: M8x24-L Key size: 5 Allen Special features For SPKN 1203 indexable inserts Compact design for stable facing Modular insert system for quick renewal Suitable for production and workshop use FAQ Which inserts are compatible with this milling head? The face milling head accepts SPKN 1203 indexable inserts, offering a standardised insert format for easy replacement and inventory management. How is the milling head secured in the toolholder? The T152TM uses a 27 mm shank for positive locating; fastening is performed with the supplied M8x24-L screw and a 5 Allen key for secure clamping. Is the head suitable for finishing passes? Yes — the 75° cutting angle and six cutting edges make the head appropriate for facing and finishing applications where a smooth, flat surface is required. What dimensions should be considered when setting up the tool? Key dimensions are Ø 80 mm diameter, 55 mm overall length and 27 mm shank diameter; account for these when selecting a compatible toolholder. Does the design support quick insert changes in production? The modular nature and standard fastening allow fast insert changes, which reduces downtime and supports continuous production workflows. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Planing Cutter Head for OFCR 0704 Indexable Inserts 43° Cutting Angle, 6 Cuts, 50mm Overall Length - Teknik Makina
Take advantage of the combination of robust 80 mm diameter, six cutting edges and a precise 43° cutting angle for efficient face milling with OFCR 0704 indexable inserts; order directly via Metav Werkzeuge or request technical advice from our consultants. Planing Cutter Head T264TM – 80 mm, 6‑edge cutter for OFCR 0704 inserts (Teknik Makina) A Planing Cutter Head T264TM designed for high‑efficiency face milling applications with OFCR 0704 indexable inserts, suitable for use in production and workshop milling systems. 80 mm head diameter Six cutting edges for continuous cutting Compatible with OFCR 0704 indexable inserts Ø27 mm shank with BK300 clamping Precision and higher throughput in face milling The T264TM head translates a compact design into measurable productivity gains: the 80 mm diameter combined with a 43° cutting angle produces a favourable chip flow and lower cutting forces, which helps achieve consistent surface finish and extended insert life. By using OFCR 0704 indexable inserts, the tool enables rapid insert changes and predictable cutting performance, reducing unplanned downtime and simplifying tool management in small to medium batch production. Secure clamping and straightforward maintenance A robust clamping concept is provided by the BK300 clamp and a M8x18 locking screw, supported by a 4 mm Allen key for routine service. This arrangement ensures reliable seating of each insert and repeatable indexing; the solid Ø27 mm shank secures the head in common toolholders. The result is minimal vibration and stable cutting conditions, which lowers scrap rates and keeps set‑up times short — a direct benefit for busy workshops and CNC cells where throughput and repeatability matter. Versatile suitability and application reasoning Designed for processors of general steels and typical workshop materials, the cutter head accepts OFCR 0704 inserts that are adjustable for a range of feed and depth settings. The head's six cutting edges allow for balanced material removal and can be rotated or replaced to match job demands. Explaining the term: indexable inserts are separate carbide cutting pieces that are clamped into the head, offering cost‑efficient renewal of the cutting geometry without changing the complete tool body. Operational advantages that affect the bottom line Using this cutter head supports a rational approach to tooling: fewer full tool replacements, quicker maintenance cycles and consistent machining quality. The compact overall length of 50 mm keeps the tool‑overhang short for improved rigidity, while a dedicated design for OFCR 0704 inserts helps standardise inventory across similar milling operations. These factors combine to enhance machining economy and support predictable production planning. For Teknik Makina quality and practical tool advice, contact Metav Werkzeuge for availability and technical consultation — Metav Werkzeuge is ready to advise from Emmerich: +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: T264TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Facts Diameter: 80 mm Cutting edges: 6 Overall length: 50 mm Shank diameter: Ø27 mm Cutting angle: 43° Weight: 1.205 kg Special features Suitable for OFCR 0704 indexable inserts Clamping: BK300 Locking screw: M8x18 Service tool: 4 mm Allen key FAQ What inserts fit this cutter head? The cutter head is designed for OFCR 0704 indexable inserts; Teknik Makina specifies this interface to ensure correct seating and cutting geometry. How is the head secured in the toolholder? Securing is via a Ø27 mm shank with BK300 clamping; the M8x18 locking screw provides axial retention. Can inserts be changed quickly on the shop floor? Yes, the tool uses indexable inserts so replacement is fast and does not require changing the whole cutter head. Is the cutter head suitable for heavy roughing? The six cutting edges and 43° cutting angle support robust material removal, while the compact design reduces overhang and improves rigidity for demanding cuts. What maintenance tools are required? A 4 mm Allen key is used for the locking screw; routine checks of clamp and insert seating are recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Planing Cutter Head for SNEU 1206 Indexable Inserts, 45° Cutting Angle, 7 Cutting Edges, 50mm Overall Length - Teknik Makina
Take advantage of the combination of 45° cutting geometry, secure Torx fastening and compatibility with SNEU 1206 inserts for consistent surface quality and reliable cycle times — order directly via Metav Werkzeuge or request application advice from our consultants. Face milling head T166TM — 45° cutting angle, Ø 80 mm, for SNEU 1206 indexable inserts (Teknik Makina) Face milling head T166TM — a robust milling solution suited to face cutting and light shoulder milling operations with SNEU 1206 indexable inserts and standard 27 mm mounting Compatible with SNEU 1206 indexable inserts 45° cutting angle for controlled chip evacuation Ø 80 mm cutter head diameter M5x12 Torx screw with T20 key for secure fixing Consistent surface finish through optimised cutting geometry The head's 45° cutting angle is designed to balance cutting force and surface quality: the approach reduces radial load while improving chip formation, which results in a more even finish on machined faces. With compatibility for SNEU 1206 indexable inserts the assembly supports economical insert usage and straightforward regrinding strategies. These characteristics help maintain stable cycle times on serial and job-shop production runs while limiting vibration and tool deflection. The combination of geometry and insert compatibility therefore produces a measurable improvement in process reliability. Secure mounting and simple service routines A short, rigid mounting with a 27 mm shank and fastening via an M5x12 Torx screw (T20 key) provides a compact clamping system that reduces run-out and simplifies changeover. The compact overall length contributes to stability during face milling operations, and the straightforward screw-and-insert arrangement reduces downtime during maintenance or indexable insert changes. The relatively low mass of 1.252 kg supports faster spindle acceleration and deceleration where applicable, improving throughput without compromising stiffness. High material removal potential with multiple cutting edges With an outside diameter of Ø 80 mm and 7 cutting edges, the cutter head spreads cutting forces across several inserts, lowering the unit load per cutting edge. This distribution supports longer insert life and enables consistent material removal rates on steels and general workshop materials. The head's layout is particularly suited to finishing passes and light-medium roughing where surface integrity and dimensional stability are priorities. Applications, users and workshop benefits The component is targeted at machine shops and industrial workshops requiring a compact, reliable milling solution for face machining and light shoulder work on conventional and CNC mills. The tool's construction emphasises process stability and reproducible results, making it appropriate for production environments that demand repeatability rather than experimental tool trials. If process validation is required, the Metav Werkzeuge team can advise on suitable insert grades and cutting parameters to match batch sizes and material types. For precision milling with a reliable 45° face milling head, contact Metav Werkzeuge for technical guidance and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for application recommendations and availability. Technical Data Article number: T166TM Manufacturer: Teknik Makina Product: Face milling head for SNEU 1206 indexable inserts Diameter: 80 mm Total length: 50 mm Number of cutting edges: 7 Shank diameter / mounting: 27 mm Weight: 1.252 kg Cutting angle: 45° Torx screw: M5x12 Torx key size: T20 Compatible inserts: for SNEU 1206 indexable inserts Intended use: face milling / light shoulder milling Mounting system: Torx screw fixation Construction: compact, short overall length Application focus: stability and repeatable surface quality FAQ What insert type is recommended for this milling head? The face milling head T166TM is specified for use with SNEU 1206 indexable inserts to ensure correct seating and cutter geometry. Which fastening hardware secures the inserts and head? Fixing is accomplished with an M5x12 Torx screw, tightened with a T20 Torx key for reliable clamping. What diameter and number of cutting edges does the head provide? The cutter has an Ø 80 mm diameter and 7 cutting edges, a combination chosen to improve load distribution and surface finish. Is the head suitable for heavy roughing operations? The design prioritises stability and finishing capability; it is best used for face milling and light to medium material removal rather than heavy roughing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Planing Tool Head for ODHT 0605 Indexable Inserts, 43° Cutting Angle, 6 Cuts, M5x12 Screw - Teknik Makina
Take advantage of the 80 mm diameter, six cutting edges and secure M5x12 Torx clamping to increase material removal rates and reduce tool change frequency; order the planing cutter head directly via Metav Werkzeuge or consult our specialists for integration advice. Planing cutter head T211TM – 80 mm diameter, for ODHT 0605 indexable inserts (Teknik Makina) The Planing cutter head T211TM is a compact tool head designed for face planing and finishing with ODHT 0605 indexable inserts, suitable for production and job-shop milling applications 80 mm diameter for broad cutting paths Six cutting edges for continuous material removal For ODHT 0605 indexable inserts (Walter compatible) Clamped with M5x12 Torx screw (T20) Faster throughput through optimised cutter geometry The T211TM tool head combines an 80 mm diameter with a 43° cutting angle, which yields smooth chip formation and steady cutting forces. This geometry is aimed at improving cycle times on face-planing operations while maintaining surface quality. The combination of diameter and cutting angle reduces chatter risk in typical milling set-ups, allowing shops to pursue higher feed rates without compromising stability. The design is particularly effective when used with high-performance indexable inserts intended for finishing and roughing sequences. Quick insert changes and reliable clamping for uptime Tool changes are simplified by the standardised clamping arrangement: a M5x12 Torx clamping screw with a T20 key interface secures each insert. The use of ODHT 0605 inserts means insert indexing is straightforward and repeatable, reducing downtime during maintenance. Compatibility with Walter-type inserts ensures access to a wide range of grades and geometries for various materials, so the cutter head supports flexible process planning and quick adaptation to different workpieces. Robust shank and compact overall size for versatile mounting A 27 mm tool shank and an overall length of 50 mm make this cutter head easy to integrate into common toolholders while keeping the overhang short, which helps to preserve rigidity. The head's mass (approx. 1.07 kg) contributes to stable cutting behaviour on both manual milling machines and CNC equipment, particularly in interrupted cutting where momentum aids consistency. These dimensions are suited to shops that require a compact, yet capable, tool head for face milling and planing tasks. Practical benefits for workshops and production lines Specifying a purpose-built cutter head like the T211TM supports predictable shop-floor results: fewer tool changes, consistent tool seating and wide insert availability for different materials. The head is intended for industrial users who prioritise uptime and repeatable geometry; it fits into multi-step machining processes where a reliable face-planing solution is needed. For procurement, the compatibility with common ODHT 0605 inserts simplifies stock management and provides access to established insert technology. Contact Metav Werkzeuge for detailed integration advice on the Teknik Makina T211TM planing cutter head and to discuss compatible insert grades—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T211TM Manufacturer: Teknik Makina Designation: Planing cutter head for ODHT 0605 indexable inserts Core data Diameter: 80 mm Overall length: 50 mm Shank diameter / Aufnahme: 27 mm Cutting angle: 43° Cutting edges: 6 Weight: 1.07 kg Clamping screw: M5x12 Torx key size: T20 Features Compatible with ODHT 0605 indexable inserts Suitable for Walter insert systems Compact tool head for face planing applications FAQ Which inserts fit this cutter head? The T211TM accepts ODHT 0605 indexable inserts; the cutter head is designed for that insert size and is compatible with standard Walter-formatted grades. How is the insert secured in the tool head? Inserts are clamped using an M5x12 Torx screw; the recommended key interface is T20 for secure and repeatable fastening of the insert. What are the key dimensions to check for mounting? Important dimensions include the 80 mm cutter diameter, 27 mm shank diameter and 50 mm overall length—these determine holder compatibility and overhang. Is the cutter head suitable for production use? Yes, the Teknik Makina T211TM is designed for industrial face-planing and finishing operations where predictable tool behaviour and quick insert changes are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Planing Tool Head For PNMU 1206 Indexable Inserts, 8 Cutting Edges, 27mm Shank Diameter - Teknik Makina
Take advantage of a compact, high-performance face-milling solution with a robust Ø80 mm head, 8 cutting edges and a standard 27 mm clamping shank for consistent chip removal and long tool life; purchase and technical advice are available through Metav Werkzeuge. Planmesserkopf — face-milling head for PNMU 1206 indexable inserts by Teknik Makina, Ø80 mm, 8 cutting edges A Planmesserkopf designed for heavy-duty face milling and fine finishing in mixed production environments, compatible with PNMU 1206 indexable inserts and standard workshop toolholders Ø80 mm head diameter for high metal removal rates 8 cutting edges for uniform surface quality 27 mm clamping shank for secure attachment Compatible with PNMU 1006 / PNMU 1206 indexable inserts Increase throughput with a balanced Ø80 mm design The Ø80 mm head diameter combined with eight cutting edges delivers a stable cutting action that improves cycle times while maintaining surface finish. The multi-edge layout reduces individual cutting load and spreads wear, which extends insert life and keeps changeover frequency to a minimum. For machining operations that demand both stock removal and controlled finish, this cutter head provides a reliable compromise between aggressive removal rates and surface integrity. The solid mechanical design ensures consistent results even under varying feed rates. Fast insert replacement and standardised clamping for uninterrupted work Integration with common indexable formats such as PNMU 1206 (and compatible PNMU 1006) simplifies logistics and tooling planning. The head uses M4x10 fixing screws and a Torx T15 interface to secure inserts, enabling quick, repeatable changes with standard workshop tools. The 27 mm shank offers a secure mounting in conventional toolholders, reducing runout and vibration. These features minimise downtime and make the component easy to service during planned maintenance windows, supporting continuous production workflows. Engineered for repeatability and predictable performance A total height of 50 mm and the head’s geometry contribute to a rigid setup that helps maintain concentricity and repeatable cutting conditions. The arrangement of eight teeth produces a steady chip flow and lowers the load per tooth, which reduces the risk of thermal peaks and edge chipping. Where process stability and reproducible tolerances are essential, the head’s construction supports predictable tool behaviour across batches. Documentation and compatibility with common insert manufacturers further simplify procurement and quality planning. For tailored advice or to secure supply through Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930; Metav’s technical team will advise on integration and cutting data for specific materials Technical Data Article number: T724TM Name: Planmesserkopf Description: for PNMU 1206 Indexable Inserts Manufacturer: Teknik Makina Facts Head diameter: 80 mm Total height: 50 mm Cutting edges: 8 Shank / clamping diameter: 27 mm Fixing screw: M4x10 Torx key size: T15 Special features Compatible inserts: PNMU 1006 / PNMU 1206 Insert grade / designation: TGTC Compatible insert manufacturer: YG-1 Suitable for face-milling applications Robust, workshop-friendly clamping system FAQ Which insert type fits the head? The head accepts PNMU 1206 format inserts; PNMU 1006 inserts are also listed as compatible and the cutter is aligned to common PNMU geometries. What fixing hardware is required for insert replacement? M4x10 screws secure the inserts; a Torx T15 key is used for straightforward, repeatable tightening during servicing. What are the key dimensions to check for toolholder compatibility? Verify a head diameter of 80 mm and a 27 mm clamping shank; these dimensions are critical for correct seating and concentricity in the toolholder. Is the cutter suitable for finishing as well as roughing? With eight cutting edges and a stable head geometry, the cutter head balances material removal and surface quality, making it suitable for both roughing and light finishing passes when paired with appropriate inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Precision Corner Turning Head for LNGX 1307 Indexable Inserts, 90° Cutting Angle, 7 Cutting Edges, M4x10 Torx Screw - Teknik Makina
Take advantage of a compact corner tool holder that combines a 90° cutting geometry with secure clamping and broad compatibility for efficient turning operations; order the component directly through Metav Werkzeuge or consult our specialists for application-specific setup and delivery from Emmerich. Corner tool holder T493TM — for LNGX 1307 indexable inserts, 90° cutting angle (Teknik Makina) A robust corner turning head designed for external turning and facing tasks, the corner tool holder T493TM suits workshops requiring repeatable, precise 90° corner cuts with LNGX 1307 indexable inserts 90° cutting geometry for precise corner turning Compatible with LNGX 1307 indexable inserts 27 mm shank diameter for secure clamping M4x10 Torx screw; T15 Torx key required Consistent, accurate corner turning from the 90° geometry The central advantage of this tool is its 90° cutting angle, which delivers predictable corner profiles and simplifies toolpath planning on lathes or turning centres. Fitted for LNGX 1307 indexable inserts, the holder supports efficient chip removal and repeatable seating, with seven cutting edges providing multiple index positions before replacement is required. This arrangement reduces non-productive time and improves process reliability, while the defined geometry aids programmers and operators in achieving consistent part geometry across production runs. Fast, secure mounting that keeps set-up time low A 27 mm shank provides a stiff interface to the turret or toolpost, reducing chatter and keeping tolerances tight during interrupted cuts. The insert is clamped using an M4x10 Torx screw, released and tightened with a T15 key, allowing quick insert changes and straightforward torque application with standard maintenance tools. These features combine to shorten machine downtime and deliver a dependable clamping solution that supports predictable tool life and surface finish. Broad system compatibility for flexible tooling strategies Compatibility with LNGX 1307 indexable inserts and proven fitment for Walter insert systems makes the holder a practical choice when consolidating tooling inventories or switching between supplier inserts. The acceptance of established insert formats means straightforward integration into existing tooling families, enabling shops to standardise on a small number of holders while retaining a wide range of cutting grades and geometries from different insert manufacturers. Durable dimensions engineered for workshop conditions With an 80 mm diameter head and 50 mm overall length, the toolholder balances reach and rigidity for many external turning tasks; the unit weight of 1.124 kg provides mass that dampens vibration without excessive bulk. The construction and geometry aim to withstand the rigours of daily workshop use, supporting stable cutting conditions and contributing to consistent surface quality and dimensional control on finished parts. Contact Metav Werkzeuge for tailored advice on Teknik Makina tooling and fast supply of the T493TM corner tool holder — call +49 2822 7131930 or email info@metav-werkzeuge.com for application guidance and delivery from Emmerich Technical data Article number: T493TM Manufacturer: Teknik Makina Designation: Corner tool holder for LNGX 1307 indexable inserts ECLASS: 21181015 Facts Shank diameter: 27 mm Head diameter: 80 mm Overall length: 50 mm Cutting edges: 7 Cutting angle: 90° Weight: 1.124 kg Special features Torx screw: M4x10 Torx key: T15 For indexable inserts: LNGX 1307 Compatible with insert manufacturer: Walter FAQ What insert type does this holder accept? The holder is designed for LNGX 1307 indexable inserts and is compatible with systems from Walter, enabling use of standard insert grades. Which fastener is used to secure the insert? An M4x10 Torx screw secures the insert; a T15 Torx key is recommended for correct tightening and release. What shank diameter is required for mounting? The tool has a 27 mm shank diameter, which fits turrets and toolposts designed for that shaft size and offers increased rigidity. Is the T493TM suitable for heavy-duty cuts? The combination of a substantial head (Ø 80 mm) and 27 mm shank provides good stiffness for many external turning operations; select cutting data and insert grade according to workpiece material and depth of cut. How does the holder improve uptime? By accepting widely used LNGX 1307 inserts and using a simple M4x10/T15 clamping method, the holder reduces insert-change time and supports predictable tool life, helping to maintain steady production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Round Cutter For RDMT 1003 Indexable Inserts, 7 Teeth, 50mm Length - Teknik Makina
Combine robust Ø80 mm cutting performance with 7 cutting edges and a secure 27 mm shank for reliable machining results; order the round insert cutter T294-1TM via Metav Werkzeuge or contact our consultants for integration advice. Round Insert Cutter T294-1TM — Ø80 mm, for RDMT 1003 indexable inserts by Teknik Cutting Tools Round Insert Cutter T294-1TM for precision indexable-insert milling in production and workshop environments Ø80 mm cutting diameter 7 cutting edges for smooth stock removal 27 mm shank diameter for secure clamping Compatible with RDMT 1003 indexable inserts High cutting capacity for steady material removal The T294-1TM is designed for consistent chip evacuation and stable cutting in repetitive machining tasks. With a Ø80 mm cutting diameter and 7 cutting edges, the tool distributes cutting forces across multiple inserts to reduce vibration and improve surface finish. Using round indexable inserts simplifies edge changes and lowers tooling costs compared with solid cutters; worn geometry is restored by replacing individual inserts rather than the complete head. This configuration is particularly suited to CNC milling operations where cycle-time stability and predictable tool life translate directly into measurable productivity gains. Secure clamping and fast serviceability to reduce downtime A 27 mm clamping diameter provides a rigid interface with compatible toolholders for repeatable concentricity. The cutter uses a locking screw M3.5 and a Torx retention screw M3.5x8.5, serviceable with a T15 Torx key, enabling quick insert changes with minimal setup time. The modest mass (approx. 1.048 kg) contributes to a compact, well-balanced assembly that is easy to handle during tool changes. Together, these features support efficient maintenance cycles and limit machine downtime — an operational advantage for medium- and high-volume production environments. Compatibility and practical workshop applications Specifically configured for RDMT 1003 indexable inserts, this cutter is a pragmatic choice where insert interchangeability and flexibility matter. The tool’s geometry and insert interface are aimed at general-purpose milling tasks such as light roughing and finishing where round inserts offer predictable wear patterns. Because inserts can be rotated or replaced individually, the cutter supports cost-effective tool management and reduces overall tooling spend. The simple mechanical setup and widely available Torx hardware also make the cutter straightforward to integrate into existing tool libraries. For reliable deployment and to discuss application-specific recommendations for Teknik Cutting Tools' round insert cutter, contact Metav Werkzeuge for personalised advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T294-1TM Manufacturer: Teknik Makina Designation: for RDMT 1003 Indexable Inserts Core technical data Diameter: 80 mm Shank diameter: 27 mm Total length: 50 mm Cutting edges: 7 Weight: 1.048 kg Special features Suitable for RDMT 1003 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 FAQ Which inserts fit this cutter? The cutter accepts RDMT 1003 indexable inserts as specified for the T294-1TM round insert cutter. What is the shank diameter for toolholder selection? The tool features a 27 mm shank diameter, suitable for holders matching that diameter. How many cutting edges are on the cutter head? The cutter is supplied with 7 cutting edges, optimised for balanced cutting performance. Which fastening hardware is required for insert changes? Insert retention uses an M3.5x8.5 Torx screw and a T15 Torx key; the locking screw is M3.5. What are the overall dimensions to check for tool clearance? The main dimensions are Ø80 mm diameter and 50 mm total length for the T294-1TM. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Round Insert Cutter For RPMW 1606 Indexable Inserts, 6 Teeth, 27mm Shank - Teknik Makina
Take advantage of the combination of fast material removal, straightforward insert replacement and rigid clamping for uninterrupted milling performance; order the cutter body directly via Metav Werkzeuge or request application advice for integration into existing CNC setups. Round Insert Face Mill by Teknik Makina – 80 mm, for RPMW 1606 indexable inserts The Round Insert Face Mill is a cutter body engineered for high-efficiency face milling using RPMW 1606 indexable inserts across industrial CNC operations. 80 mm cutting diameter for larger engagement 6 cutting edges for continuous productivity Designed for RPMW 1606 indexable inserts Faster metal removal with reliable stability The design delivers a high material removal rate through an 80 mm cutting diameter combined with 6 cutting edges, which spreads the load and maintains consistent chip evacuation. This results in steadier cutting forces and improved surface finish compared with single-edge solutions. Compatibility with RPMW 1606 indexable inserts allows selection of grade and geometry optimised for aluminium, steel or more demanding alloys, so cycle times are reduced while tool life is extended. Secure clamping and minimal downtime Quick insert changes are enabled by the standard M5x12 Torx screws and T20 key interface, which are familiar to workshop technicians and reduce changeover time. The cutter mounts on a rigid shank with 27 mm arbor diameter for axial stability and reduced vibration, thereby protecting insert edges and machine spindle. Clear mechanical fixing means shorter setup routines and predictable torque requirements for repeatable clamping. Broad compatibility for workshop flexibility Designed to accept common supplier inserts, the tool is compatible with Korloy RPMW 1606 indexable inserts, reducing the need to stock multiple insert types. With a 50 mm overall height the body offers solid support for medium-depth face milling in general workshop and production environments. Manufactured by Teknik Cutting Tools and supplied under the Teknik Makina designation, the cutter body suits shops aiming to streamline tooling inventories without sacrificing machining performance. For tailored application advice and immediate availability of the Teknik Makina round face mill, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T718TM Manufacturer: Teknik Makina ECLASS: 21180902 ETIM: EC011860 SKU: T718TM Facts Diameter: 80 mm Overall height: 50 mm Number of cutting edges: 6 Arbor (shank) diameter: 27 mm Torx key size: T20 Torx screw: M5x12 Design & compatibility For RPMW 1606 indexable inserts Compatible with Korloy indexable inserts Indexable face mill body for CNC milling Suitable for industrial workshop applications FAQ Which insert type is required for this cutter body? The Round Insert Face Mill accepts RPMW 1606 indexable inserts; Korloy grades are explicitly compatible and commonly used with this cutter body (Teknik Makina, SKU T718TM). How many cutting edges does the tool provide and what is the benefit? This face mill has 6 cutting edges, which allows continuous cutting with balanced load distribution and improved throughput compared with fewer-edged designs. What fastening hardware is used for the inserts? Inserts are secured with M5x12 Torx screws tightened with a T20 key, providing a reliable and repeatable clamping method. What arbor size is required for mounting the cutter body? The tool requires a mounting interface with a 27 mm shank diameter to ensure correct seating and minimise runout during operation. For which workshop applications is this cutter body intended? The cutter body is intended for general face milling tasks in production and maintenance shops where RPMW 1606 indexable inserts are suitable, offering a balance of versatility and productivity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Round Insert Face Mill for RDMT 12T3 Indexable Inserts, 7 Cutting Edges, 50mm Overall Length, M3.5 Clamp Screw - Teknik Makina
Take advantage of robust stability and a modular insert system for reliable milling operations; the combination of an Ø 80 mm cutting diameter and secure Torx clamping minimises downtime and delivers consistent results. Order the round face mill directly via Metav Werkzeuge or consult our specialists for application advice. Round face mill T668TM — indexable-insert face mill, Ø 80 mm, 7 cutters — Teknik Makina Round face mill T668TM for precision machining and versatile insert use across production and workshop milling applications Ø 80 mm cutting diameter 7 cutting edges for efficient material removal For RDMT 12T3 indexable inserts 27 mm shank diameter for secure mounting Compatible with Palbit inserts Stable mounting and controlled cutting performance The design centres on mechanical stability: a 27 mm shank and compact overall length 50 mm reduce overhang and vibration, helping to achieve repeatable surface quality in serial production. The cutter’s clamping concept uses M4x10 Torx screws (Torx key T15) and an additional M3.5 locking screw, which together ensure reliable insert retention and minimise micro-movements during cutting. Reduced movement translates into fewer rejects and less rework, improving shop-floor efficiency. Modular insert system for fast tool change and uptime By accepting RDMT 12T3 indexable inserts, this face mill offers a practical balance between insert economy and cutting capacity. The seven-edge configuration gives multiple effective cutters per revolution, so wear can be distributed and insert life extended. Compatibility with Palbit inserts provides access to a broad range of geometries and grades, enabling flexible adaptation to varied machining tasks and shorter tool-change cycles — a direct saving on operating time. Practical assembly, maintenance and workshop ergonomics Maintenance is straightforward thanks to standardised fastening: the Torx T15 engagement and the listed screw sizes simplify torque procedures and spare-part planning. The cutter’s weight of 1.181 kg and its compact dimensions make handling and tool set-up easier at the machine. Clear mechanical features reduce setup variation and support predictable machining parameters, which benefits process planning and tool management in both small workshops and larger production cells. Designed for reliability in production environments Engineered for consistent performance, the tool combines a robust body with proven indexable-insert technology to suit repetitive milling tasks. The compact configuration and secure fastenings support stable chip formation and repeatable cycles. Backed by Metav’s quality filter in Emmerich and broad product availability, the face mill is positioned as a dependable option for firms seeking a tried-and-tested cutting solution that integrates smoothly into existing tooling strategies. For tailored machining recommendations or to secure the Ø 80 mm face mill from Teknik Cutting Tools, contact Metav Werkzeuge for expert advice and reliable delivery from Emmerich. Technical data Article number: T668TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Product type: Indexable-insert face mill ECLASS: 21180902 ETIM: EC011860 Core dimensions Diameter: 80 mm Shank (clamping) diameter: 27 mm Number of cutting edges: 7 Overall length: 50 mm Weight: 1.181 kg Torx screw size: M4x10 Locking screw: M3.5 Features & compatibility For RDMT 12T3 indexable inserts Compatible with Palbit inserts Torx key required: T15 SKU: T668TM FAQ Which insert type fits this face mill? The cutter accepts RDMT 12T3 indexable inserts; compatibility with Palbit inserts expands the choice of grades and geometries. How many effective cutting edges does the tool use? The tool utilises 7 cutting edges, providing continuous engagement that helps spread wear and maintain cutting performance. What are the key mounting dimensions to check? Key dimensions are Ø 80 mm cutting diameter and 27 mm shank diameter; overall length is 50 mm for setup and clearance planning. Which screw and key sizes are specified for assembly? Assembly uses M4x10 Torx screws with a T15 key and an M3.5 locking screw for insert retention. Is this tool suitable for short tool overhang setups? The compact 50 mm overall length and 27 mm shank support reduced overhang configurations that favour stability in short-reach milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Round Insert Milling Cutter For RHKW 1204 Indexable Inserts, 7 Teeth, T15 Torx Screw - Teknik Makina
Take advantage of a robust combination of high material removal rate and secure clamping: the cutter’s 80 mm diameter with seven cutting edges increases productivity while the 27 mm shank ensures stable mounting on machining centres. Benefit from compatibility with the industry-standard RHKW 1204 inserts and order the round insert face mill directly via Metav Werkzeuge or ask our consultants if needed. Round Insert Face Mill for RHKW 1204 Indexable Inserts — 80 mm, 27 mm Shank (Teknik Makina) The Round Insert Face Mill is a compact indexable milling cutter engineered for efficient face and profile milling with RHKW 1204 indexable inserts. 80 mm diameter for versatile milling 27 mm shank for secure clamping Compatible with RHKW 1204 indexable inserts Seven cutting edges for high material removal High productivity through optimised cutter geometry The milling head delivers a measurable productivity gain thanks to its 80 mm diameter and seven cutting edges, which together reduce cycle times in roughing and semi-finishing passes. The tool body is balanced for stable rotation, and the cutter’s geometry is designed to distribute cutting forces evenly so chip evacuation remains consistent. By combining a larger cutting diameter with multiple cutting edges, the tool achieves a higher material removal rate without compromising surface integrity — an advantage for small-batch production and series work alike. Secure mounting and fast tool changes for reduced downtime Engineered for reliable clamping, the cutter features a 27 mm shank that provides a positive fit in standard toolholders and minimises runout. Fixing hardware includes a M3.5 clamp screw, M4x10 Torx screw and a T15 Torx key, enabling quick, repeatable insert changes and straightforward maintenance. The secure connection reduces vibration and tool deflection, which translates into longer insert life and fewer interruptions on the shop floor, supporting a steady production flow and predictable machine utilisation. Industry compatibility and practical handling in the workshop Designed for use with RHKW 1204 indexable inserts and compatible with inserts from Ingersoll, this cutter integrates smoothly into existing tooling suites that rely on round insert technology. With an overall length of 50 mm and a mass of 1.039 kg, the tool offers a compact footprint while providing sufficient inertia for stable cutting in many milling operations. The construction suits a wide range of machining tasks where indexable round cutters are preferred for their economy and straightforward reconditioning of cutting edges. Choose the Teknik Makina round insert face mill for consistent milling output — contact Metav Werkzeuge in Emmerich for tailored advice and prompt dispatch: +49 2822 7131930, info@metav-werkzeuge.com Technical data SKU: T615TM Name: Round insert face mill (Rundplattenfräser) Description: for RHKW 1204 Indexable Inserts Manufacturer: Teknik Makina Compatible insert manufacturer: Ingersoll eClass: 21180902 ETIM: EC011860 Facts Diameter: 80 mm Shank diameter: 27 mm Overall length: 50 mm Cutting edges: 7 Weight: 1.039 kg Special features Insert type: RHKW 1204 Clamp screw: M3.5 Torx screw: M4x10 Torx key: T15 Compatible with Ingersoll inserts FAQ Which insert type does this cutter accept? The cutter accepts RHKW 1204 indexable inserts; it is supplied as a round insert face mill compatible with that insert geometry. Is the tool compatible with Ingersoll inserts? Yes — the design is compatible with inserts from Ingersoll, enabling integration into existing toolsets that use that supplier’s RHKW 1204 inserts. What are the mounting dimensions required for the toolholder? The milling head uses a 27 mm shank, requiring a matching toolholder bore and secure clamping to ensure low runout and stable operation. Which fastening hardware is used for insert clamping? Insert clamping and retention use a M3.5 clamp screw together with an M4x10 Torx screw; a T15 Torx key is specified for assembly and maintenance. How heavy and long is the cutter assembly? The complete assembly has an overall length of 50 mm and a weight of 1.039 kg, providing a compact tool that balances rigidity with manageable handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Square Tool Head for BDMT 1704 Indexable Inserts 90° Cutting Angle, M4x10 Torx Screw - Teknik Makina
Take advantage of the combination of rigid design, straightforward insert compatibility and quick clamping to maintain uninterrupted turning operations; order the tool directly through Metav Werkzeuge or consult the technical team for application-specific advice. Corner Turning Head T540TM – Toolholder for BDMT 1704 indexable inserts with 90° cutting angle A robust Corner Turning Head T540TM designed for external turning and facing tasks, optimised for use with BDMT 1704 indexable inserts and engineered for secure mounting in standard 27 mm toolholders. 90° cutting angle for standard turning Ø80 mm head diameter for rigid support 27 mm shank diameter for secure mounting Compatible with BDMT 1704 indexable inserts Torx M4x10 clamping screw, T15 key Stable geometry for repeatable turning results The toolhead’s 90° cutting angle and Ø80 mm head deliver an optimised geometry that improves rigidity during external turning operations. This stability reduces vibration and tool deflection, which in turn helps to maintain consistent surface finishes and extend insert life. The assembly is designed to integrate with common lathe tool shanks, offering the mechanical steadiness required for medium to heavy cutting tasks and predictable cycle times. Fast, secure clamping to cut downtime Insert retention is achieved with a Torx M4x10 clamping screw tightened with a T15 key, providing a positive and repeatable clamp force that keeps BDMT 1704 inserts seated accurately. The clear mechanical interface reduces changeover time and the risk of incorrect seating; combined with compatibility for Kyocera inserts, the head supports efficient workshop logistics and rapid tool replacement under production conditions. Compatibility and practical workshop benefits With a 27 mm shank, an overall length of 50 mm and a head weight of 1.165 kg, the unit is compact yet substantial enough to contribute to a stable cutting arrangement. Its specification for BDMT 1704 indexable inserts allows stocking of widely available insert grades for finishing or light roughing, simplifying procurement and inventory management. Designed for ease of handling, the toolhead provides tangible productivity gains with minimal adaptation to existing tooling systems. Contact Metav Werkzeuge for tailored tooling recommendations and reliable supply of the Teknik Makina Corner Turning Head T540TM — technical advice and order processing from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: T540TM Name: Corner turning head (Eckmesserkopf) Manufacturer: Teknik Makina Eclass: 21181015 Dimensions & performance Head diameter: 80 mm Shank diameter: 27 mm Overall length: 50 mm Cutting angle: 90° Weight: 1.165 kg Cutting edges: 7 Features & compatibility For BDMT 1704 indexable inserts Compatible with Kyocera inserts Clamping screw: Torx M4x10 Torx key: T15 FAQ Which insert type fits this turning head? The turning head accepts BDMT 1704 indexable inserts and is compatible with Kyocera-manufactured inserts of that designation. What are the key dimensions for mounting and setup? Shank diameter 27 mm, head diameter 80 mm, overall length 50 mm and weight 1.165 kg — suitable for standard 27 mm toolholders and compact lathe setups. How is the insert secured in the holder? A Torx M4x10 clamping screw secures the insert; the screw is tightened with a T15 Torx key for repeatable clamping force. Is this toolhead intended for finishing or heavier cuts? The 90° cutting geometry and sturdy head diameter provide rigidity suitable for reliable finishing and light to medium roughing, depending on insert grade and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Square Turning Head for 90° WNGX 0403 Indexable Inserts, T8 Screw Interface - Teknik Makina
Take advantage of precise 90° geometry, a rigid Ø 80 mm body and a 27 mm clamping bore for dependable shoulder turning and reduced rework; order directly via Metav Werkzeuge or consult the team for application-specific setup. Corner Tool Head T695TM — 90° indexable turning head by Teknik Cutting Tools The Corner Tool Head is a compact turning head engineered for accurate shoulder profiling and external turning in CNC lathes, designed to accept standard indexable inserts and suit diverse production environments. 90° cutting geometry for square shoulders Ø 80 mm body for enhanced rigidity 27 mm clamping bore for secure mounting Robust 50 mm overall height for stable turning Consistent 90° geometry for accurate shoulder machining The tool head’s defining feature is its 90° cutting geometry, which delivers repeatable right-angle shoulders and consistent part profiles. This geometry reduces secondary operations because the component tolerance is achieved directly in the turning pass. By pairing the right insert grade with the head’s geometry, shops benefit from shorter cycle times and fewer set-ups, making the assembly line more efficient and predictable. The use of indexable inserts allows wear to be managed economically and keeps downtime low. Rigid, compact design that reduces vibration and extends insert life A robust Ø 80 mm body combined with a 27 mm clamping bore and 50 mm overall height gives the head high bending stiffness and vibration resistance. Increased rigidity translates into better surface finish and longer tool life for the insert, reducing scrap and rework. For operations where chatter or deflection would otherwise limit cutting parameters, this turning head enables higher feeds or depths of cut while maintaining dimensional stability and part quality. Practical handling and integration into production workflows The head is supplied with Torx fastenings (Torx T8 key; screw M2.5×5.5) for secure and rapid assembly and maintenance. Compatibility with common insert formats and major insert manufacturers such as Korloy ensures straightforward sourcing of cutting grades and geometries for specific materials. The turning head is therefore suitable for short runs and series production alike, offering a balance of precision and serviceability that supports busy workshop schedules. For application advice, tooling recommendations or to place an order for the Teknik Cutting Tools corner tool head T695TM, contact Metav Werkzeuge directly at info@metav-werkzeuge.com or +49 2822 7131930 — assistance is available from the Emmerich team. Technical Data SKU: T695TM Designation: Corner tool head (Eckmesserkopf) Manufacturer: Teknik Makina Numbers / Core technical data Body diameter: 80 mm Overall height: 50 mm Clamping bore: 27 mm Cutting angle: 90° Cutting edges: 11 Special features / Versions Torx T8 fastening system Screw M2.5×5.5 Compatible with Korloy indexable inserts Suitable for shoulder and external turning FAQ Which insert formats fit this turning head? The turning head accepts standard indexable inserts from major manufacturers; compatibility is confirmed for inserts supplied by Korloy and similar product lines. Is the head suitable for heavy roughing cuts? The combination of a Ø 80 mm body and a 27 mm clamping bore provides elevated rigidity, allowing more aggressive cutting parameters than with slimmer holders, depending on machine and insert choice. What fastening tools are required for assembly and maintenance? Assembly and insert clamping use a Torx T8 key; the head is supplied with screws sized M2.5×5.5 for secure fixation. Can the head be used for fine finishing passes? Yes — the rigid design reduces vibration and supports fine feeds and shallow depths of cut for improved surface finish when paired with the appropriate insert geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Threaded 90° Corner Tool Head for ANMX 1607 Indexable Inserts, 6 Cutting Edges, 50mm Overall Length - Teknik Makina
Take advantage of the combination of a secure 27 mm mounting, a 90° cutting angle and compatibility with ANKX 1607 indexable inserts to improve repeatability and minimise tool-change downtime; order via Metav Werkzeuge or request consultancy for application-specific advice. Corner tool head — 90° cutting angle, for ANKX 1607 indexable inserts (Teknik Makina) The Corner tool head is intended as a rigid turning and shoulder tool head for CNC lathes, compatible with ANKX 1607 indexable inserts and optimised for secure mounting in standard tool holders. Corner tool head for ANKX 1607 inserts 90° cutting angle for shoulder turning 27 mm mounting diameter for secure fit M4.5×11 Torx screw with T15 key Repeatable shoulder turning from a stiff connection A precision mounting diameter 27 mm combined with a 90° cutting angle delivers a stable interface between tool and machine. The resulting rigidity reduces vibration and deflection during shoulder cuts, which directly improves dimensional repeatability and surface finish. For operations where concentricity and accurate step depths matter, this configuration provides a clear mechanical advantage by keeping the cutting geometry consistent through the work cycle. Faster servicing and longer uptime thanks to insert design Compatibility with indexable inserts such as ANKX 1607 and ANMX 1607 reduces downtime: worn edges are replaced instead of regrinding whole tools. The design features six cutting edges, extending the available life per insert and lowering tooling costs per component produced. Fast clamping and a single M4.5×11 Torx screw secured with a T15 key simplify insert changes and maintenance, enabling quick turnarounds during shift changes or small-batch runs. Robust dimensions for stable machining cycles A head diameter of 80 mm and an overall length 50 mm combine with a mass of 1.101 kg to provide inertial stability during interrupted cuts. The higher rotating mass contributes to steadiness at cut engagement points without overloading the turret, supporting consistent chip control and reduced chatter. This layout suits medium-duty turning where a dependable balance between accessibility and stiffness is required. Integrates with standard CNC tool posts to increase productivity Designed for common lathe tool holders, the turning head fits into established workflows and is straightforward to document in tool libraries. Its compatibility with ANKX-series inserts permits rapid matching of workpiece material to insert grade and geometry, aiding process optimisation. The result is a practical tool-holder solution that supports lean production by simplifying tooling inventories and standardising changeover procedures. For application advice or to secure supply of this Teknik Makina corner tool head (SKU T173TM), contact Metav Werkzeuge for tailored technical consultation and reliable delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T173TM Manufacturer: Teknik Makina Product: Corner tool head for ANKX 1607 indexable inserts Facts Cutting angle: 90° Mounting diameter: 27 mm Diameter: 80 mm Overall length: 50 mm Weight: 1.101 kg Cutting edges: 6 Special features Compatible with ANKX 1607 indexable inserts Also compatible with ANMX 1607 inserts M4.5×11 Torx screw T15 Torx key FAQ What inserts fit this turning head? This turning head is compatible with ANKX 1607 indexable inserts and also accepts ANMX 1607 inserts, offering flexibility in insert selection for different materials and grades. How is the insert secured? Inserts are clamped with a single M4.5×11 Torx screw; the screw is tightened using a T15 key for secure and repeatable fixing of the insert in the pocket. Is the head suitable for shoulder turning and facing? Yes. The 90° cutting angle and the solid 27 mm mounting diameter make the head particularly suitable for shoulder turning and facing operations where accuracy and stiffness are important. Will this tool head fit standard turret tool posts? The head is designed for common lathe tool-holder interfaces; compatibility should be confirmed against the machine tool’s clamping dimensions, referencing SKU T173TM and Teknik Makina specifications. What maintenance is recommended to preserve accuracy? Regular inspection of the insert seat, the Torx screw, and the mounting interface is advised; replacing worn inserts and maintaining correct screw torque will help preserve the head’s repeatability and cutting performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Turning Tool Head For ADMT 1606 Indexable Inserts 90° 7 Cutting Edges M4x10 Torx T15, 27mm Shank - Teknik Makina
Take advantage of the precise 90° cutting geometry and robust 27 mm shank for consistent shoulder machining; the compact Ø80 head and secure M4x10 Torx clamping ensure repeatable performance on indexable inserts. Order directly via Metav Werkzeuge or ask our consultants for integration support. Eckmesserkopf — Right-angle tool head for ADMT 1606 indexable inserts, 90° cutting angle (Teknik Makina) The Eckmesserkopf is a compact right-angle turning head designed for external shoulder and face operations using ADMT 1606 indexable inserts; suitable for workshop and production lathes where a reliable, repeatable tool interface is required. *90° cutting angle for accurate shoulder cuts *Compatible with ADMT 1606 inserts (Walter) *27 mm shank diameter for stable clamping *M4x10 Torx fastening with T15 key Reliable geometry for repeatable shoulder machining The right-angle holder provides a defined 90° cutting angle, which delivers a consistent engagement geometry for shoulder and facing operations. This stable cutting orientation reduces the need for repeated setup adjustments and helps achieve uniform part dimensions in small-batch and serial production. The compact Ø80 head minimises overhang while maintaining sufficient clearance for chip evacuation, so cycle times stay predictable and tool life is optimised. Stable clamping and quick insert replacement Featuring a 27 mm shank for secure mounting, the head combines rigid support with accessible fastening: the insert is secured using an M4x10 Torx screw tightened with a T15 key. The simple clamping interface shortens maintenance time and lowers the risk of incorrect torque during changes. With seven cutting edges noted on the design, the component supports efficient indexable-insert use and limits downtime associated with tool handling. Designed for compatibility with standard inserts and systems Engineered for ADMT 1606 indexable inserts and tested for fit with Walter manufactured plates, the holder integrates with common insert standards to simplify inventory and tool planning. The compact overall length of 52 mm contributes to minimised stick-out, which in turn improves rigidity and reduces vibration. Where tool interchangeability and predictable performance are priorities, this head offers a practical balance between modularity and a purpose-driven footprint. Practical benefits for workshop and production environments Weighing 1.254 kg, the component is substantial enough to provide damping during cuts while remaining straightforward to mount and reposition. The configuration supports faster set-up routines and fewer in-process adjustments, yielding improved throughput. For operations aiming to combine dependable repeatability with straightforward serviceability, the holder’s form factor and fastening method provide tangible time-savings and consistent machining outcomes. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools T356TM right‑angle tool head into existing setups and to discuss compatible inserts and clamping recommendations Technical data Article number: T356TM Brand: Teknik Makina Facts Diameter: 80 mm Total length: 52 mm Shank diameter (d): 27 mm Weight: 1.254 kg Cutting angle: 90° Cutting edges: 7 Special features Compatible with ADMT 1606 indexable inserts Torx screw M4x10 for insert clamping Torx key size T15 required Designed for external shoulder and face applications FAQ What insert type does this holder accept? The holder accepts ADMT 1606 indexable inserts; it is designed for secure seating and correct orientation with that insert format. Is the clamping fastener a common size? Yes, the insert is secured with an M4x10 Torx screw tightened using a T15 key. Which manufacturers’ inserts are known to fit this head? Compatibility has been confirmed for Walter ADMT 1606 inserts; the holder follows common insert geometry for interchangeability. How does the 27 mm shank affect mounting stability? A 27 mm shank delivers a robust connection to the toolpost or turret, reducing deflection and improving dimensional repeatability during shoulder cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Turning Tool Holder for ANKX 1205 Indexable Inserts 90° Cutting Angle, M4x10 Torx T15 - Teknik Makina
Benefit from a robust combination of compatibility, rigidity and precise 90° cutting geometry to maintain consistent cycle times and surface quality; order this tool head for delivery and expert advice through Metav Werkzeuge or consult their specialists for application-specific recommendations. Corner turning head – 90° cutting geometry, Ø80 mm | Teknik Makina The corner turning head for ANKX 1205 indexable inserts provides rigid, right‑angle machining for medium‑duty CNC turning and facing operations Rigid 90° cutting geometry Ø80 mm body diameter 27 mm shank for stable clamping ISCAR-compatible ANKX insert fit Consistent form and surface finish through rigid geometry The toolhead's design focuses on stability and repeatability: the Ø80 mm body combined with a 27 mm shank delivers a stiff interface to the turret, reducing chatter and improving surface finish in shoulder and profile turning. The built‑in 90° cutting angle creates defined part shoulders and faster set-up tolerances, which aids process consistency across batch production. For operations where dimensional control is essential, this geometry reduces rework and contributes directly to higher first‑pass yield. Fast insert changes and straightforward maintenance Compatibility with established indexable systems streamlines workshop logistics. The head is specified for ANKX 1205 indexable inserts and matches common vendor standards from ISCAR, enabling simple stock management and swift insert replacement. Insert retention is secured with an M4x10 Torx screw tightened using a T15 key, so changeovers are quick and require only standard tooling. The indexable design reduces downtime compared with brazed solutions and simplifies edge changes without special fixtures. Practical dimensions for versatile workshop use With an overall length of 50 mm and a mass of 1.21 kg, the head balances reach and rigidity for general turning and finishing tasks; the compact form helps to maintain clamping stability while still allowing access into tighter work envelopes. The specification of seven cutting edges supports sustained cutting performance between re‑indexes, depending on material and cutting data. The combination of these measurable parameters makes the component a dependable choice for repeating shoulder work and mixed batch turning where tool life and quick servability matter. Metav's assurance for reliable supply and technical guidance Sourced and distributed via Metav Werkzeuge, the product is supported by a European quality filter and decades of application experience. Metav's approach reduces supplier complexity for workshops and purchasing departments, backed by a broad inventory and technical consultancy. This ensures that the tool head arrives as specified and that process queries can be resolved with pragmatic, industry‑grade answers to support production continuity. For application guidance or to arrange supply of the Teknik Makina corner turning head through Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and delivery options Technical data Article number: T576TM Manufacturer: Teknik Makina Product: Corner turning head for ANKX 1205 indexable inserts Facts Body diameter: 80 mm Overall length: 50 mm Shank diameter (Ø): 27 mm Weight: 1.21 kg Cutting angle: 90° Number of edges: 7 Torx screw: M4x10 Torx key size: T15 Special features Compatibility with ISCAR inserts Designed for ANKX indexable insert family Quick insert retention via Torx screw Compact design for medium‑duty turning FAQ What insert type does the head accept? The corner turning head is designed for ANKX 1205 indexable inserts and is compatible with ISCAR‑specification ANKX systems. Which toolholder connection is required for mounting? The head requires a 27 mm shank holder for secure clamping and optimal rigidity as specified for this model (Ø27 mm). How is an insert fixed to the head? Inserts are secured with an M4x10 Torx screw; a T15 key is used for tightening and loosening during index changes. Is the unit suitable for shoulder turning with tight tolerances? Yes. The 90° cutting geometry and the Ø80 mm body provide the stiffness needed for accurate shoulder and profile turning. What are the typical dimensions and weight to consider for turret clearance? Overall length is 50 mm and weight is 1.21 kg; these figures support planning for turret overhang and balance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Turning Tool Holder for SPMT 1204 Indexable Inserts M5x12 Torx, 6 Inserts 50mm Length - Teknik Makina
Take advantage of a compact turning solution that combines a 27 mm shank for rigid mounting, compatibility with SPMT 1204 indexable inserts and a stable Ø 80 mm head for reduced vibration — ideal for reliable external turning. Order the corner turning head directly via Metav Werkzeuge or ask our consultants if needed. T652TM corner turning head by Teknik Makina — for SPMT 1204 indexable inserts, 27 mm shank The T652TM corner turning head is a purpose-built external turning tool head for precision metalcutting on lathes, compatible with SPMT 1204 indexable inserts and engineered to maintain process stability in demanding machining tasks. Solid 27 mm shank for rigid mounting Accepts SPMT 1204 indexable inserts Head Ø 80 mm for stable cutting Torx M5x12 fastening with T20 key Increased process stability through robust design The T652TM is designed to deliver stable cutting performance by combining a solid 27 mm shank with a substantial Ø 80 mm head, which together reduce tool deflection and vibration during turning operations. This mechanical stability translates directly into improved surface finish and longer insert life, especially when machining interrupted cuts or materials that tend to chatter. The head's mass and geometry support consistent cutting conditions, making cycle times more predictable for production environments. Practical benefits for workshop productivity Fitted for SPMT 1204 indexable inserts, the tool head enables fast insert indexing and predictable cutting geometry, reducing downtime for tool changes. The configuration with 6 cutting edges allows economical use of indexable inserts and minimises tooling cost per component. Quick, repeatable clamping is ensured by the M5x12 Torx screw and the matching T20 key, which simplify insert replacement and secure the insert seat with consistent torque — a clear advantage in high-mix workshops where rapid set-up is essential. Easy integration and handling on the machine With an overall length of 50 mm and a measured weight of 1.186 kg, the head balances compactness and mass, helping to maintain steady spindle loads without excessive overhang. The modular nature of the head, intended for use with standard SPMT 1204 inserts, allows straightforward replacement of cutting edges and compatibility with existing toolholders. For procurement and logistics, choosing this head through Metav Werkzeuge provides access to a broad range of workshop supplies and a proven quality filter from the supplier in Emmerich. For precise tool selection and purchasing of the Teknik Makina T652TM corner turning head, contact Metav Werkzeuge — technical consultants are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to advise on integration into existing tool systems Technical data SKU: T652TM Product: Corner turning head for SPMT 1204 indexable inserts Manufacturer: Teknik Makina Shank diameter: 27 mm Head diameter: 80 mm Number of cutting edges: 6 Core data Weight: 1.186 kg Overall length: 50 mm Shank diameter: 27 mm Head diameter: 80 mm Cutting edges: 6 Features Torx screw: M5x12 Torx key size: T20 Compatible inserts: SPMT 1204 indexable inserts Application: external turning FAQ What inserts fit this turning head? The T652TM is designed for SPMT 1204 indexable inserts, offering standard seating and geometry for those insert types. How is the insert secured in the head? Insert clamping is achieved with an M5x12 Torx screw, tightened with a T20 key, providing repeatable and secure fixation for the SPMT 1204 inserts. Is this head suitable for heavy-duty turning? The combination of a 27 mm shank and Ø 80 mm head improves rigidity and vibration damping, supporting stable operation in demanding external turning tasks. Can the head be mounted on standard toolholders? The shank diameter and compact overall length make the head compatible with toolholders designed for a 27 mm mounting interface; toolholder compatibility should be confirmed against the machine’s toolpost specifications. How many usable cutting edges are available per insert? The tool head accepts SPMT 1204 inserts, which typically provide multiple indexable edges; the head itself presents 6 cutting edges as part of its design configuration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
XNMX 0606 Indexable Face Mill Head With Internal Coolant, 51° Cut Angle - Teknik Makina
Take advantage of the combination of robust compatibility with XNMX 0606 indexable inserts, integrated internal coolant and a 51° cutting angle for predictable face milling performance — order directly via Metav Werkzeuge or consult the Metav team for tailored recommendations. Planmesserkopf face milling head by Teknik Cutting Tools — internal coolant, for XNMX 0606 indexable inserts Planmesserkopf for precision face milling applications; designed for use with XNMX 0606 indexable inserts and suitable for a range of industrial machining tasks. Compatible with XNMX 0606 inserts Internal coolant for improved chip evacuation Torx T15 screw M4x12.5 fitted 51° cutting angle for stable machining Proven compatibility and process stability The milling head is engineered for consistent results with XNMX 0606 indexable inserts, providing a secure seating and repeatable geometry. Compatibility with Korloy-type inserts ensures access to a broad range of insert grades for different workpiece materials. The 51° cutting angle delivers a balanced mix of cutting force moderation and surface finish, which reduces vibration and supports longer tool life. For production planning, this means fewer stoppages and more predictable cycle times, improving overall machining throughput. Better cooling and chip control for higher productivity Built-in internal coolant channels direct coolant precisely to the cutting edge, enhancing lubrication and heat dissipation at the cutting zone. This targeted coolant delivery promotes effective chip evacuation and reduces the risk of built-up edge, especially in medium- to high-material-removal-rate operations. Improved thermal management also helps to maintain insert geometry and prolong service intervals. The practical result is a more efficient machining process with a lower rate of insert replacement and improved surface integrity on workpieces. Simple fastening and maintenance for workshop efficiency Assembly and maintenance are straightforward: the head is supplied with a Torx T15 interface and uses M4x12.5 fastening screws, allowing rapid replacement of inserts and straightforward reconditioning. The design supports standard workshop tooling for quick interventions, keeping downtime to a minimum. Technical staff benefit from the clear interface and standardised hardware, which simplifies inventory and reduces the variety of special tools required. Where required, the head integrates into conventional toolholders for straightforward integration into existing setups. For reliable face milling performance choose Teknik Cutting Tools’ Planmesserkopf (SKU: T735TM) — contact Metav Werkzeuge for expert advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T735TM Product type: face milling head Label: Planmesserkopf XNMX 0606 with internal coolant Manufacturer: Teknik Cutting Tools Facts Cutting angle: 51° Insert compatibility: XNMX 0606 Fastening screw: M4x12.5 Torx key: T15 eClass: 21181015 Special features Internal coolant Compatible with Korloy inserts Indexable inserts application Suitable for face milling operations FAQ Which inserts fit this head? The face milling head accepts XNMX 0606 indexable inserts; compatible Korloy grades are supported for a wide range of applications. Does the head provide internal coolant? Yes — the Planmesserkopf features internal coolant channels to improve lubrication and chip evacuation at the cutting edge. What fastening hardware is required? Fastening uses M4x12.5 screws with a Torx T15 interface; the SKU for this unit is T735TM. Is the cutting angle suitable for heavy-duty machining? The 51° cutting angle offers a compromise between strong cutting engagement and stable forces, making it suitable for robust face milling tasks. Which manufacturer supplies this milling head? This unit is supplied by Teknik Cutting Tools and distributed via Metav Werkzeuge for the European market. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com