3000g Precision Table Scale With Dual Rear Display 0.1g Readability, Stainless Steel Platform, LCD, Battery/AC - KERN
€270.00
Product information "3000g Precision Table Scale With Dual Rear Display 0.1g Readability, Stainless Steel Platform, LCD, Battery/AC - KERN"
Combining high-precision measurement with a robust stainless-steel weighing plate and a rear second display, this scale supports fast batch checks and reliable quality assurance. With a 3,000 g capacity and 0.1 g readability plus strain-gauge measurement and reproducible results, it reduces rework and speeds throughput. Order the KERN FCB.3K0.1 table scale directly via Metav Werkzeuge or ask our consultants if needed.
KERN FCB.3K0.1 Table Scale — 3,000 g, 0.1 g readability
A KERN FCB.3K0.1 table scale engineered for laboratory and workshop weighing, featuring a stainless-steel pan and a second rear display for clear two‑way readout
- 3,000 g capacity, 0.1 g readability
- Stainless-steel weighing plate 253×228 mm
- Large 25 mm LCD digits for clear readings
- Rear second display for visible readout
Precision that keeps production on specification
The 3,000 g capacity combined with 0.1 g readability makes this instrument suitable for fine batch checks and routine quality control where traceable repeatability is required. The internal strain gauge weighing system provides stable zeroing and fast signal processing, while a reproducibility of 0.1 g and linearity ± 0.3 g ensure measurements remain consistent across the full range. These technical properties translate into fewer rejected lots and greater confidence during incoming inspection and small-part weighing.
Robust design for everyday workshop and laboratory use
A stainless-steel weighing plate and compact build provide a hygienic, durable surface that resists corrosion and is simple to clean after each shift. The rectangular weighing surface (253×228 mm) accommodates small trays and sample containers without excess movement. The instrument’s housing dimensions and modest mass make bench mounting straightforward while maintaining a stable working footprint. The clear LCD readout with 25 mm digits improves visibility under typical workshop lighting and reduces operator errors.
Flexible power and clear visibility for efficient workflows
Power can be supplied by a standard 9 V block battery or an optional rechargeable battery (charging time 10 h); a full battery run time of 12 h supports uninterrupted shifts away from fixed mains. Included plug-in adapters for CH, EURO, UK and US sockets allow rapid deployment across sites. The second display mounted at the rear provides a customer- or operator-facing readout, useful for checkout, sample handovers and shared workspaces, while piece counting capability supports small-batch inventory tasks with minimum piece weights adjustable for laboratory or normal-counting modes. For application advice, Metav’s specialists can assist with integration and workflow alignment.
Contact Metav Werkzeuge in Emmerich for tailored advice on the KERN table scale and to discuss delivery and technical options for your workshop or laboratory
Technical data
- Article number: FCB
- SKU: FCB.3K0.1
- GTIN: 4045761202672
- Manufacturer: KERN
- Country of origin: CN
- Eclass: 27320401
- Tariff number: 84238129
Core specifications
- Weighing range: 3,000 g
- Readability: 0.1 g
- Reproducibility: 0.1 g
- Linearity: ± 0.3 g
- Pan dimensions: 253×228 mm
- Housing dimensions: 322×267×91 mm
- Display digit height: 25 mm
- Weight: 2.59 kg
- Operating temperature: 5 °C – 35 °C
- Max. relative humidity: 80 %
- Battery life: 12 h
- Battery charge time: 10 h
- Power input: 220 V – 240 V AC, 50 Hz
Features & options
- Weighing plate material: stainless steel
- Weighing system: strain gauge
- Display type: LCD
- Second display: rear-mounted
- Power: 9 V block battery; optional rechargeable battery
- Mains adapter included: CH; EURO; UK; US
- Piece counting min: lab 200 mg; normal 2 g
FAQ
How accurate is the scale for small-quantity checks?
The KERN FCB.3K0.1 table scale provides 0.1 g readability with reproducibility of 0.1 g and linearity of ± 0.3 g, delivering reliable results for small-quantity batch checks and routine QC.
Can this instrument be used for piece counting tasks?
Yes. The KERN FCB.3K0.1 supports piece counting with minimum piece weights specified for laboratory mode (200 mg) and normal counting (2 g), enabling efficient inventory and batch assembly work.
What power options are available on the unit?
The scale accepts a 9 V block battery and can be fitted with an optional rechargeable battery (charge time 10 h). A plug-in mains adapter is supplied with fittings for CH, EURO, UK and US sockets.
Is the weighing surface suitable for workshop environments?
The stainless-steel weighing plate is corrosion-resistant and simple to clean, making it suitable for both laboratory benches and industrial workstations where durability and hygiene are important.
How visible are the readings for operators and customers?
The instrument features large 25 mm LCD digits and an additional rear-mounted display, giving clear, two-way readability for operator and customer or for shared inspection stations.
Metav Werkzeuge · Emmerich am Rhein · info@metav-werkzeuge.com · +49 2822 7131930
Accessory Items
Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930
Benefit from the hood’s direct compatibility with KERN FCE and FCB scales, its lightweight construction and ready-fit design for fast replacement; keep measurement stations clean and reduce downtime. Order the protective hoods via Metav Werkzeuge or consult our team for further technical details. Protective hood FCB-A02S05 (for KERN FCE & FCB) — pack of 5, lightweight fit Protective hood FCB-A02S05 designed for rapid protection of scale assemblies and straightforward replacement in professional environments Protective hood for FCE and FCB scales Pack of 5 for immediate replacement stock Approx. 80 g per hood for minimal load Quick-fit design for fast maintenance Preserve measurement reliability with a simple protective solution The protective hood provides a targeted barrier that keeps sensitive scale components free from dust, splashes and incidental debris, helping to maintain consistent performance. Its compatibility with both FCE and FCB model ranges ensures that service intervals are not extended unnecessarily by contamination. The compact design contributes only approx. 80 g to the weighing assembly, reducing influence on tare and calibration while permitting straightforward exchange when required. For workshops seeking predictable throughput, this accessory supports continuous operation by reducing unplanned cleaning and adjustment. Reduce downtime and simplify maintenance routines A small inventory of spare hoods eliminates waiting time for replacement parts and minimises production interruptions. Supplied as a pack of 5, the set suits multi-station workshops and service departments that prioritise rapid turnover and predictable maintenance windows. The hood’s form is engineered for quick-fit mounting, which shortens maintenance tasks to a matter of minutes rather than hours. For teams less familiar with scale maintenance, a simple replacement procedure reduces the need for specialist intervention while supporting correct handling and preserving the instrument’s calibration stability. Practical supply and professional sourcing for reliability Sourced through established channels, the hoods arrive ready to integrate with existing scale equipment and spare-part strategies. Metav’s role as a precision partner means access to a broad product range and reliable logistics from Emmerich; stocking compatible protective accessories like these supports efficient workshop workflows and reduces supplier complexity. The lightweight, professional-grade accessory is aimed at industrial and craft environments where predictable measurements and uninterrupted operation are essential for productivity and quality assurance. Contact Metav Werkzeuge in Emmerich for tailored advice on compatibility, spare-part planning or to request further product information via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: FCB-A02S05 SKU: FCB-A02S05 Manufacturer: KERN Country of origin: China HS code: 39269097 Core data Weight: 0.08 kg Delivery quantity: 5 pieces eClass: 24322502 Special features Compatible with FCE and FCB scale models Category: Scales accessory (Zubehör) Fast dispatch noted in product description Intended for professional workshop use FAQ How does the hood attach to KERN FCE and FCB models? The protective hood FCB-A02S05 is designed for a quick-fit attachment to compatible KERN FCE and FCB scale housings, allowing fast replacement without special tools. Is the pack suitable for multi-station workshops? Yes, the pack of 5 hoods provides immediate replacement stock for several stations or for scheduled maintenance intervals. What is the weight of a single hood and does it affect calibration? A single hood weighs approximately 0.08 kg; the low mass helps avoid significant influence on tare settings and calibration stability when installed correctly. Can these hoods protect against liquid spills? The hoods are intended to shield scale components from incidental splashes and dust; for full liquid protection, consult detailed specifications to confirm suitability for specific conditions. Where can further technical details for the FCB-A02S05 be obtained? Additional technical information and compatibility queries can be provided by Metav Werkzeuge, which supplies the FCB-A02S05 for professional applications KERN — Country of origin: China — Contact via Metav Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930
Conflicting product data detected: the battery runtime is listed as "up to 10h without backlight" and also as "20h runtime", which is inconsistent. This discrepancy in the provided information creates confusion and makes it difficult to generate a reliable product description. Accurate and consistent data is essential for creating a clear and trustworthy overview of the product's features and performance. Without clarification or further details to resolve these conflicting runtime specifications, it is not possible to ensure the accuracy of the description or provide potential customers with the necessary information to make an informed decision about the product.