30000 g Precision Table Scale 1 g Readability, Stainless Steel Pan 253×228 mm, LCD - KERN

Take advantage of robust dust and splash protection paired with simple replacement logistics to maintain uninterrupted weighing processes; the Protective Cover FCF-A01S05 combines practical compatibility with rapid availability from Metav Werkzeuge — order directly via Metav Werkzeuge or request advice from the consultants. Protective Cover FCF-A01S05 — Scale accessory for KERN FCF/FCE/FCB series The Protective Cover FCF-A01S05 is a scale accessory that protects keyboards and housings on KERN weighing equipment, designed for workshop and industrial environments. Protects keyboard and housing Compatible with FCF, FCE, FCB series Supplied as a set of 5 Reduce downtime with reliable protective coverage The protective cover provides consistent dust and splash protection for sensitive scale components, reducing the frequency of service interventions and prolonging the life of the instrument. By preventing particulate ingress over the keyboard and instrument housing, the accessory supports uninterrupted measurement accuracy and less frequent cleaning cycles. For production environments where traceability and repeatability matter, such passive protection contributes directly to operational efficiency and predictable maintenance planning. Fit-and-forget compatibility to speed up replacement Designed to match the contours of KERN’s FCF, FCE and FCB families, the cover is a ready-made accessory that simplifies spare-part logistics. Supplied as a 5-piece set, it enables scheduled rotation of covers so that clean, undamaged protection is always at hand, which minimises unplanned interruptions. The straightforward design keeps installation time to a minimum and avoids complex adjustments, supporting quick changeovers in busy workshop routines. Practical handling that supports workshop workflows Weighing little more than a few hundred grams, the set is convenient to store and simple to deploy when a cover requires replacement. The lightweight construction eases handling during frequent changeovers and reduces strain when fitting small instruments. As an accessory classified within scales spare parts, the covers integrate seamlessly into existing inventories and spare-part cycles without requiring additional tooling or training. Measurable benefits for process reliability By shielding keyboards and housings from contaminants, the accessory helps maintain calibration stability and reduces the likelihood of sensor or electronics contamination. This translates into fewer service calls and steadier throughput for repetitive weighing tasks. The solution is cost-effective when considered as part of a comprehensive uptime strategy: small, regular investments in protection yield measurable reductions in downtime and maintenance effort. Choose original KERN protective covers from Metav Werkzeuge to safeguard weighing equipment and keep processes running smoothly — contact Metav Werkzeuge in Emmerich for ordering and expert advice via info@metav-werkzeuge.com or telephone +49 2822 7131930. Technical data Article number: FCF-A01S05 Manufacturer: KERN GTIN: 4045761187153 Origin: CN Tariff code: 39269097 Core specifications Weight: 0.4 kg Pack content: 5 pieces ECLASS: 24322502 Compatibility & features Fits series FCF, FCE, FCB Protects keyboard and housing Product group: Scales accessories Category: Accessory FAQ Is this cover compatible with KERN desktop and bench scales? The cover is designed for KERN models in the FCF, FCE and FCB series and provides protection over keyboard and housing for those instrument types. How many covers are included with one order? Each delivery contains a set of five covers, supplied as a 5-piece set to allow for scheduled replacement and storage rotation. Will the cover affect weighing accuracy or calibration? The cover shields external components and does not interfere with weighing mechanics; regular calibration procedures for the instrument remain unchanged. Can the protective cover be cleaned and reused? The covers are intended for repeated use where practical; cleaning between uses extends service life and maintains hygiene around the keyboard and housing. Is this accessory suitable for harsh industrial environments? The cover offers effective protection against dust and splashes, reducing contamination risk for instruments used in demanding workshop settings Manufacturer: KERN — Manufacturer (origin: China); Dealer and contact: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930

Take advantage of the combination of long runtime, rapid recharge and proven KERN compatibility to keep weighing operations uninterrupted. Order the power module directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN GAB-A04 internal battery pack — up to 90 h runtime, approx. 12 h recharge The GAB-A04 is an internal rechargeable battery pack for KERN weighing instruments, designed to deliver extended operation between charges and secure measurement availability in workshop and industrial settings. Internal rechargeable battery operation Up to 90 h runtime (without backlight) Full recharge in approx. 12 h Compatible with KERN scale series Fewer interruptions thanks to extended operation The internal power module provides a long runtime of up to 90 h without backlight, which means extended periods of unattended measurement and less need for mains connection. For production environments and mobile weighing tasks this reduces process interruptions and allows measuring equipment to remain operational during shift changes or temporary site relocations. The specification assumes operation with the display backlight switched off; enabling illumination will reduce the runtime accordingly. Fast recharge to keep workflows moving A complete recharge takes approximately 12 h, allowing predictable scheduling of maintenance windows and ensuring the instrument is ready for the next workday. The charging characteristic supports efficient turnaround between uses, and the unit’s modest mass of 0.74 kg makes replacement and handling straightforward for workshop staff. These attributes contribute directly to higher equipment availability and lower indirect labour costs associated with battery management. Designed for seamless integration with KERN instruments This battery pack is intended as an internal accessory for KERN weighing devices and is supplied as a purpose-built power solution rather than a third-party retrofit. The design focuses on plug-and-play compatibility with the relevant scale range, simplifying installation and avoiding complex conversions. As a dedicated power module it maintains the instrument’s original operation modes and preserves calibration routines, supporting consistent measurement results in daily use. Reliability backed by a trusted distributor network Sourcing the power module through an established partner ensures dependable supply and after-sales continuity. Metav Werkzeuge acts as a quality filter for the European market, combining long-standing expertise with a wide product range to simplify procurement. The combination of component reliability and a dependable logistics partner reduces the risk of downtime and supports uninterrupted measurement capability in industrial and workshop environments. Contact Metav Werkzeuge in Emmerich to secure a KERN GAB-A04 for your scales or request further technical clarification via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: GAB-A04 Manufacturer: KERN GTIN: 4045761126473 Country of origin: CN Facts Weight: 0.74 kg Recharge time: 12 h Battery runtime: up to 90 h (without backlight) Tariff number: 85072080 ECLASS: 21059207 Special features Internal battery operation for scales Lead (Pb) battery chemistry Accessory for weighing equipment Product group: batteries / accumulators Segment: scale accessories FAQ Is the battery compatible with all KERN scales? The battery pack is designed for integration with the relevant KERN weighing instrument series; compatibility should be checked against the instrument model and specifications. How long does a full recharge take? A full recharge requires approximately 12 h under standard charging conditions for the GAB-A04 internal pack. What runtime can be expected in daily use? The specified runtime is up to 90 h without display backlight; using the backlight or additional functions will reduce available operating time. What type of battery is used in this module? The unit uses a lead (Pb) accumulator chemistry, specified for internal operation in compatible KERN instruments. Is the runtime affected by instrument settings? Yes. Features such as display illumination and frequent data transmissions shorten the battery life compared with the quoted figure for non-illuminated operation. KERN · Origin: CN · GTIN: 4045761126473

Reliable 9 V / 300 mA output combined with a 100–240 V universal input and interchangeable international plug adapters supports uninterrupted use across workshops and while travelling; the compact, lightweight design keeps bench space clear and simplifies storage. Order the KERN YKA-03N directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN YKA-03N — Universal external power adapter with 9 V / 300 mA output and multi‑plug set The KERN YKA-03N is a compact universal external power adapter designed for scales and precision instruments, providing a steady 9 V / 300 mA supply and interchangeable plugs for EU, UK, US and CH mains sockets. Universal input 100–240 V, 50/60 Hz Stable 9 V DC output at 300 mA Interchangeable EU/UK/US/CH plug adapters Compact and lightweight, approx. 0.08 kg Reliable compatibility for mixed‑fleet workshops The adapter offers true international compatibility, accepting 100–240 V at 50/60 Hz, which eliminates the need for separate supplies when using instruments across different regions. This wide input range reduces logistic complexity for service technicians and procurement teams, ensuring the same power solution can be used for a variety of precision devices. The result is fewer inventory items and a more consistent power profile for bench‑level equipment. Practical plug set and travel convenience Delivered with interchangeable EU/UK/US/CH plug adapters, the unit supports rapid redeployment in different markets without additional accessories. The compact casing and lightweight construction (approx. 0.08 kg) make it suited to mobile test benches and field service kits. For applications that require frequent relocation of instruments, the adapter provides a tidy, portable option that minimises downtime and transport costs. Stable supply for sensitive measuring devices Designed as an external power source for scales and similar measuring equipment, the adapter supplies 9 V at 300 mA, matching common input requirements for precision instruments. The consistent voltage and current specification helps to maintain measurement stability and reduces the risk of fluctuations that can affect calibration results. This makes the unit appropriate for laboratory benches, inspection rooms and industrial scales where repeatable readings are essential. Clear integration into workshop supply chains As a universal external adapter, the device integrates easily with existing instrument fleets and cabling standards. The compact footprint frees up bench space, while the included plug set avoids compatibility delays when deploying equipment to different countries. For purchasing departments, the standardised specification simplifies procurement and stock management, supporting smoother operations and fewer interruptions. Choose the KERN YKA-03N for dependable international compatibility and contact Metav Werkzeuge in Emmerich for personalised advice and fast dispatch—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKA-03N Manufacturer: KERN GTIN: 4045761210431 Country of origin: CN Commodity code: 85044090 Core technical data Input voltage: 100–240 V, 50 / 60 Hz Output: 9 V DC, 300 mA Weight: approx. 0.08 kg Special features External universal power adapter for scales and precision instruments Interchangeable plug adapters included: CH, EURO, UK, US Compact form factor for bench and mobile use FAQ Is this adapter suitable for KERN scales and other precision instruments? The KERN YKA-03N is intended as an external power supply for KERN scales and comparable precision instruments that require a 9 V / 300 mA input. Which plug types are included with the adapter? The delivery scope for the adapter includes interchangeable plug adapters for EU, UK, US and CH mains sockets to support international use. Can the adapter be used worldwide without a separate voltage converter? Yes. The universal input of 100–240 V, 50/60 Hz enables operation across standard mains voltages without an additional converter. How portable is the unit for field service work? With a compact design and a weight of approximately 0.08 kg, the adapter is well suited to mobile toolkits and service engineers who require a lightweight power option. What is the exact model designation to order or reference? Refer to the SKU YKA-03N and manufacturer KERN when ordering or checking compatibility. KERN — Origin: China; SKU: YKA-03N; GTIN: 4045761210431