6 kg Precision Table Scale 0.001 kg Readability IP65 Stainless Steel Platform, LCD Display - KERN
€325.00
Product information "6 kg Precision Table Scale 0.001 kg Readability IP65 Stainless Steel Platform, LCD Display - KERN"
Take advantage of the combination of stainless steel construction, IP65 protection and precise 1 g readability for reliable portioning and hygienic production. Order the scale directly via Metav Werkzeuge or consult our specialists for tailored advice.
FFN 6K1IPN stainless‑steel allround table scale — IP65, 6 kg / 1 g
The FFN 6K1IPN is an all‑round table scale designed for hygienic production and industrial environments, combining robust stainless‑steel surfaces with a compact footprint for flexible shop‑floor use
- IP65 dust and splash protection
- Stainless steel housing and weighing pan
- 6 kg range with 1 g readability
- Compact and lightweight for easy relocation
Accurate portioning and consistent quality control
The scale delivers a 6 kg maximum capacity with a fine 1 g readability and a linearity specification of ±0.001 kg, ensuring repeatable measurements for daily portioning and quality checks. The internal strain gauge weighing system converts force into measurable electrical signals; this established technology provides stable results even under frequent use. For production environments where traceability and compliance matter, the precise reproducibility of 0.001 kg helps to reduce waste and ensure conformity with batch specifications.
Hygienic design that supports industry standards
Constructed with a stainless steel housing and a smooth weighing pan, the instrument resists corrosion and simplifies cleaning routines required in food and pharmaceutical settings. The IP65 rating offers protection against dust and water sprays, making the unit suitable for hygienic areas and damp production zones; this supports integration into a HACCP‑conscious quality system. Surfaces with minimal joints prevent residue build‑up and shorten cleaning cycles, which contributes to safer products and lower downtime.
Compact ergonomics for practical shop‑floor use
With a weighing surface of 233×193 mm and overall dimensions of 243×300×127 mm, the compact footprint fits tight workstations while still offering a clear LCD readout with 25 mm high digits for easy reading across a busy bench. At 3.85 kg the scale can be relocated without heavy lifting; recessed handles on the underside assist handling when the layout changes. The included mains adapter set (CH; EURO; UK; US) allows immediate use in multiple regions with no additional accessories required, simplifying installation and commissioning.
Built for continuous operation and regulatory workflows
The instrument operates reliably between −10°C and 40°C and tolerates ambient humidity up to 95%, matching the demands of many production and laboratory settings. Supplied by KERN, the unit includes recognised identifiers for inventory and procurement, enabling straightforward integration into stock control and documentation processes. Calibration options are available to support traceable measurement chains and to maintain confidence in results over the device lifetime.
For personalised guidance on whether the FFN 6K1IPN fits specific production or laboratory requirements, contact Metav Werkzeuge in Emmerich — our consultants provide expert advice and procurement support by email or phone to match the right weighing solution to the workflow.
Technical data
- SKU: FFN.6K1IPN
- Article number: FFN-N
- GTIN: 4045761134072
- Manufacturer: KERN
- Origin country: CN
- Commodity code: 84238129
Facts
- Weighing range: 6 kg
- Readability: 0.001 kg (1 g)
- Linearity: ± 0.001 kg
- Reproducibility: 0.001 kg
- Weighing pan: 233×193 mm
- Housing dimensions: 243×300×127 mm
- Weight: 3.85 kg
- Display digit height: 25 mm
- Operating temperature: −10°C to 40°C
- Max. relative humidity: 95%
- Input voltage: 110 V − 230 V AC
- Weighing system: Strain gauge
- IP protection: IP 65
Special features
- Weighing pan material: stainless steel
- Housing material: stainless steel
- Display type: LCD
- Power supply: mains adapter included (CH; EURO; UK; US)
- Suitable for: food industry, hygienic areas, pharmaceutical applications
- Supports HACCP‑compliant quality systems
- Underside carry recesses for transport
- Rectangular weighing surface
FAQ
Is the scale suitable for use in food processing environments? The FFN 6K1IPN is designed with a stainless‑steel housing and pan and an IP65 protection level, making it suitable for many food industry and hygienic applications and supporting HACCP workflows.
What accuracy can be expected for routine portioning tasks? With a readability of 1 g and a reproducibility of 0.001 kg, the instrument provides consistent accuracy for portioning and quality control in day‑to‑day production.
Does the scale require a specific power supply or adapter? The scale accepts 110 V − 230 V AC input and is supplied with mains adapters for CH, EURO, UK and US outlets, enabling use across different regions.
Can the instrument be calibrated and certified for regulatory purposes? Calibration options are available to maintain traceability and documentation; Metav Werkzeuge can advise on suitable calibration intervals and services for the scale.
How easy is the scale to move between workstations? At 3.85 kg and with integrated underside grip recesses, the unit is compact and practical to reposition within a workshop or production area.
Manufacturer: KERN — supplied by Metav Werkzeuge, Emmerich am Rhein, Germany · Email: info@metav-werkzeuge.com · Tel: +49 2822 7131930
Zubehör
Benefit from extended mobile operation with a WTB-A01N internal rechargeable battery pack that delivers up to 50 h of continuous use and recharges in approximately 12 h; the compact 0.68 kg design reduces installation impact and supports uninterrupted weighing tasks. Order the internal battery pack directly via Metav Werkzeuge or ask our consultants if technical clarification is required. WTB-A01N internal rechargeable battery pack by KERN — up to 50 h runtime, 12 h charge time the WTB-A01N is an internal rechargeable battery pack for KERN scales, engineered to provide extended mobile operation for laboratory and industrial weighing applications Up to 50 h operating time Approx. 12 h charge time Internal rechargeable battery pack Compact design, only 0.68 kg Longer running cycles for uninterrupted weighing The internal rechargeable battery offers a significant extension of mobile operating time, with a runtime of up to 50 h under conditions without backlighting. This extended autonomy reduces interruptions during prolonged measurement tasks and minimises dependence on mains power, which is particularly useful for inspection rounds, off-site checks and production sampling. The described runtime is a practical indicator for shift planning and contributes directly to process reliability and throughput. Predictable recharge time to support shift planning With a standard charge time of around 12 h, the unit enables predictable scheduling for recharging cycles and maintenance windows. The defined charging behaviour means power management can be integrated into existing workflows without unexpected downtime. Where backlight use is required, the available operating time will be reduced accordingly; this cause-and-effect relationship should be considered when planning continuous operation in illuminated-display scenarios. Compact design and installation-friendly weight Weighing only 0.68 kg, the pack is compact and designed for internal installation in compatible weighing instruments. Its modest mass minimises mechanical stress on housings and simplifies handling during service interventions. As an accessory from KERN, the battery pack is specified for use with matching scale models and is supplied as a factory-aligned power solution to maintain measurement stability and certified performance. Practical advantages for procurement and production Choosing an internally mounted rechargeable power source reduces the number of external cables and external battery carriers, contributing to a tidier workstation and fewer intervention points. The technical characteristics support a rational decision-making process focused on operational continuity and maintenance simplicity. For professional workshops and industrial environments that require robust weighing uptime, the pack represents a targeted upgrade to existing KERN weighing equipment. Contact Metav Werkzeuge in Emmerich for compatibility checks, further technical data or purchasing support via info@metav-werkzeuge.com, by phone on +49 2822 7131930 or WhatsApp at +49 170 2837271 Technical data Article number: WTB-A01N Manufacturer: KERN GTIN: 4045761146457 Commodity code: 85072080 Country of origin: CN Numbers Weight: 0.68 kg Charge time: 12 h Operating time: up to 50 h (without backlight) eClass: 21059207 Special features Internal rechargeable battery pack Designed for use with KERN weighing instruments Compact, installation-friendly format FAQ Is this battery compatible with KERN scales? The WTB-A01N is specified as an internal rechargeable battery pack for KERN weighing instruments (SKU WTB-A01N) and is intended for use with compatible KERN models. How long does the battery take to recharge fully? A full recharge requires approximately 12 hours under standard charging conditions specified for the WTB-A01N. What operating time can be expected during typical use? Operating time is stated as up to 50 hours without backlight; using the display backlight will shorten the runtime proportionally. How heavy is the battery and does it affect installation? The unit weighs 0.68 kg, a compact mass that minimises installation impact and simplifies handling during maintenance. Metav Werkzeuge, Emmerich am Rhein, eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271
Benefit from a stainless-steel, hygienic design combined with low weight and straightforward handling for fast, reliable weighing of loose goods; order the tare pan directly via Metav Werkzeuge or ask our consultants if needed. KERN Tare Pan RFS-A02 — stainless-steel weighing tray for loose items KERN Tare Pan RFS-A02 provides a purpose-built stainless-steel surface for quick, hygienic weighing of loose small parts, fruit and vegetables with compatible bench and laboratory scales. Stainless-steel construction, easy to clean Lightweight and easy handling Designed for loose small parts and produce Accessory for KERN scales and similar systems Faster, more reliable weighing for daily workflows The stainless-steel tray is designed to support efficient weighing tasks in production, retail and workshop environments. Thanks to its hygienic surface and smooth geometry, routine cleaning is quick, reducing machine downtime and maintaining consistent results. The material choice also contributes to weighing accuracy by preventing contamination and reducing offsets that arise from trapped debris. This results in a predictable tare behaviour and fewer repeat measurements, improving throughput on busy benches. Practical handling and compatibility with scale systems This accessory is optimised for integration with bench and counting scales, offering a simple way to extend existing weighing equipment for bulk or loose items. The lightweight construction eases placement and removal, while the shallow profile supports even distribution of small components for stable readings. For workshops and retail counters where speed and repeatability matter, the tray streamlines processes and supports consistent inventory recording. Low-maintenance hygiene for food and small-parts environments Constructed for straightforward maintenance, the tray’s stainless-steel surface is easy to clean and resistant to staining, which is especially beneficial when handling foodstuffs or dusty small parts. The material minimises bacterial harbourage when cleaned correctly and reduces the need for intensive maintenance regimes. Visual inspection is fast, and routine wiping keeps the weighing environment compliant with basic hygiene expectations without specialised tools. For procurement, compatibility checks or technical advice on the KERN tare pan RFS-A02, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — phone and WhatsApp support available for quick consultation Technical Data Article number: RFS-ACC SKU: RFS-A02 Manufacturer: KERN GTIN: 4045761113787 Net weight: 0.57 kg Origin: CN Customs tariff number: 84239010 eClass: 32040606 Facts Net weight 0.57 kg GTIN 4045761113787 Customs tariff 84239010 eClass 32040606 Special features Stainless-steel tray, easy and hygienic to clean Ideal for weighing loose small parts, fruit, vegetables Accessory for scales, product category: weighing accessories FAQ Is the tray suitable for food use? The stainless-steel surface of the KERN tare pan RFS-A02 is described as easy to clean and hygienic, making it suitable for weighing fruit and vegetables under routine cleaning regimes. Which scales is the tray compatible with? The tray is an accessory for bench and counting scales; it is supplied as the tare pan RFS-A02 for KERN systems and can be used with similar platforms that accept removable trays. How should the tray be cleaned to maintain accuracy? Routine wiping with a mild detergent and drying is recommended to keep the weighing surface free of residues that could affect tare values; the KERN tray’s stainless-steel finish supports straightforward maintenance. What is the net weight of the tray and does it affect scale selection? The tare pan has a net weight of 0.57 kg; this should be considered when selecting a scale with an appropriate capacity and resolution for your weighing tasks. KERN — Manufacturer country: CN