500g Precision Caliper Table Scale 0.1g Readability Stainless Steel Compact, Battery/AC, HACCP Support - KERN

The finely turned stainless steel construction, combined with OIML M1 classification and a tight 1 mg tolerance, ensures consistent calibration results for routine checks; order the KERN 347-01 calibration weight directly via Metav Werkzeuge or contact our consultants for advice on DAkkS calibration. KERN 347-01 calibration weight — 1 g OIML M1, finely turned stainless steel knob The KERN 347-01 is a precision 1 g calibration weight in knob form, designed for laboratory and workshop balances where repeatable, traceable results are required OIML class M1 precision Nominal value 1 g with 1 mg tolerance Finely turned stainless steel construction Knob shape for secure handling DAkkS calibration recommended Reliable accuracy for routine metrology The OIML M1 classification combined with a 1 mg tolerance provides a clear technical basis for routine verification and short-term checks of precision balances. This level of specification means the weight is suited to commercial and industrial verification tasks where moderate precision is required; the metrological class defines admissible error limits so decisions about compliance and adjustment can be made with confidence. By using a certified reference such as this 1 g weight, measurement uncertainty is reduced and consistency between instruments is improved, supporting reproducible production and quality-control processes. Robust, easy-to-handle design for everyday use Manufactured from finely turned stainless steel, the weight resists surface wear and corrosion that can compromise long-term stability. The knob shape facilitates safe handling and positioning on balance pans, reducing the risk of fingerprints or contamination during use. Such a design shortens handling time and lowers the likelihood of accidental drops, which in turn preserves the calibrated mass. For busy workshops and testing labs, the combination of durable material and ergonomic form translates directly into fewer interruptions and a more efficient workflow. Traceability, calibration options and regulatory note Traceability to national standards is an essential part of reliable measurement. Where an EC type approval is no longer applicable after 30 November 2025, a DAkkS calibration is recommended because it provides an equivalent level of documented traceability for most applications. Choosing a DAkkS-certified calibration service ensures that the mass value is accompanied by a calibration certificate with stated uncertainties, which supports audit requirements and quality management systems. For those who need documented proof of conformity, this route offers a widely recognised solution without changing the physical properties of the weight. Contact Metav Werkzeuge for tailored advice on the KERN 347-01 and DAkkS calibration options—our Emmerich team can advise on traceability requirements and supply the weight with reliable, local service Technical data Article number: 347 SKU: 347-01 GTIN: 4045761008632 Manufacturer: KERN Facts Nominal value: 1 g Tolerance (OIML): 1 mg OIML class: M1 Cylinder dimensions: 6×6 mm Tariff number: 84239090 eCl@ss: 32120103 Special features Material: finely turned stainless steel Form: knob Origin: DE Shape: knopfform DAkkS calibration recommended Intended use: single calibration weight FAQ What accuracy class does this weight belong to? The KERN 347-01 is specified to OIML class M1, with a tolerance of 1 mg, making it suitable for routine checks and verification tasks where this accuracy level is required. Can the weight be calibrated and documented? Yes; a DAkkS calibration is recommended for the KERN 347-01 to provide traceable documentation of mass and uncertainty, which is appropriate for most professional applications. Is the material suitable for workshop environments? The weight is made from finely turned stainless steel, which offers good resistance to corrosion and mechanical wear, supporting long-term stability in workshop and laboratory conditions. How does the knob shape benefit handling? The knob form simplifies placement and removal on balance pans, reduces direct contact with the mass surface and lowers the risk of contamination or handling errors during routine use. Will this weight meet legal verification requirements? The KERN 347-01 is OIML class M1; for legal or regulatory verification needs, consult the applicable national regulations—DAkkS calibration can provide traceability documentation where EC type approval is not applicable. KERN, Germany (manufacturer information as provided in product data)

Protective cover for FOB‑S scales that combines hygiene, simple replacement and compact storage; supplied as a five-piece set for fast replenishment. Benefit from a lightweight accessory that reduces downtime and helps maintain measuring accuracy. Order the FOB‑A11S05 directly via Metav Werkzeuge or ask our consultants if needed. FOB-A11S05 protective hood for FOB‑S scales — KERN The FOB-A11S05 is a protective hood for FOB‑S scales, designed to keep weighing equipment clean and shielded in workshop and retail environments. Pack of 5 protective hoods Compatible with FOB‑S scale series Lightweight: 0.08 kg per unit Rapid dispatch from Metav warehouse Keep scales accurate and hygienic with minimal effort The protective hood offers practical protection that prevents dust and light contamination from affecting weighing results. Used as a simple barrier, this accessory helps to maintain measurement accuracy and reduces the frequency of maintenance cycles. For businesses that rely on repeatable weighing — from production benches to checking stations — the cover acts as a cost-effective measure to preserve instrument performance and calibration intervals. Practical handling and fast replacement to reduce downtime Supplied as a pack of five, the set allows straightforward rotation: one hood on the scale, spares ready for immediate replacement. The low individual weight (0.08 kg) makes storage and handling uncomplicated, while the compact format means spare parts take little room in a workshop trolley or service kit. This convenience decreases interruption to processes and supports efficient workflows in busy industrial and commercial environments. Compatibility and supply assurance from a trusted partner Designed as an accessory for the FOB‑S series from KERN, the covers integrate into existing equipment ranges without modification. With Metav’s logistics presence in Emmerich and a broad product portfolio, restocking is straightforward and transparent — especially important for operations that require consistent supply. The combination of established manufacturer compatibility and reliable delivery supports uninterrupted operations and predictable procurement planning. For quick replenishment of scale accessories, rely on KERN quality and order the FOB‑A11S05 via Metav Werkzeuge in Emmerich, or request additional information from our consultants at info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: FOB-A11S05 Manufacturer: KERN GTIN: 4045761184626 Country of origin: CN Scope of delivery: 5 protective hoods Facts Weight: 0.08 kg Tariff number: 39269097 eClass: 24322502 Special features Compatible with FOB‑S scales Accessory for weighing equipment Rapid dispatch available from Metav stock FAQ What is included in the delivery? The delivery comprises a five-piece set of protective hoods (FOB-A11S05), supplied as a single pack. Which scales are these hoods compatible with? The covers are compatible with the FOB‑S series and intended as an accessory for KERN weighing equipment. How heavy is each hood? Each hood has a weight of 0.08 kg. Where is the product manufactured? The product origin is listed as CN (China). Are these hoods suitable for workshop use? Yes, the FOB-A11S05 is designed to provide light protection in workshop and commercial weighing environments. KERN — Manufacturer (origin: CN); For orders and enquiries: Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com, +49 2822 7131930