5000 g Precision Table Scale Stainless Steel Plate 1 g Readability LCD Battery/AC, Compact HACCP Design - KERN

Take advantage of the combination of international conformity, robust construction and compact handling for dependable routine checks. Choose a proven OIML Class M1 solution with clear tolerances and straightforward storage — order supply or request advice directly from Metav Werkzeuge. ECO Block weight — KERN calibration mass, OIML Class M1, 5 kg painted cast iron The ECO Block weight is a compact calibration mass intended for routine accuracy checks of scales and balances in workshops and service environments, combining standard-compliant tolerance with a rugged block design. Single calibration weight, OIML Class M1 Nominal mass 5 kg for medium-accuracy checks Painted cast iron block construction Compact block design for stable placement Consistent accuracy for routine calibration The block is specified to OIML Class M1, which defines permissible deviations for working calibration weights; for this nominal mass the tolerance 250 mg is stated, providing predictable error limits for everyday verification tasks. This classification means the mass is suitable as a calibration mass for many industrial and workshop applications where medium-level accuracy is required, offering a reliable reference during routine checks of shop-floor balances and postal or counting scales. Explaining the standard helps translate technical limits into operational expectations, so maintenance cycles and comparative checks can be planned with clarity. Robust construction that eases daily handling Manufactured as a painted cast iron block, the design focuses on mechanical stability and straightforward placement on weighing pans. The block form reduces tip-over risk and concentrates mass in a compact footprint, which benefits fast checks and repeatable handling. The finish provides basic surface protection and aids cleaning after use; combined with the solid construction, this reduces the frequency of handling-related maintenance without compromising the integrity required for routine verification tasks. Practical application and safe storage in the workshop Designed as a single test weight, the mass is best integrated into regular calibration routines where traceable high-end certification is not mandatory. For best results, keep the item dry, avoid mechanical shocks and place it on a non-abrasive surface or rest when not in use to preserve the calibration state. For installations that need documented traceability or calibration certificates, planning an external certification step is recommended; technical teams can advise on frequency and methods to match in-house quality assurance regimes while ensuring compliance with local or industry-specific requirements. For reliable medium-accuracy calibration with KERN quality, contact Metav Werkzeuge in Emmerich for supply and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 346-76 Manufacturer article number: T346-7-A SKU: 346-76 Manufacturer: KERN Facts Nominal mass: 5 kg Tolerance (OIML Class M1): 250 mg GTIN: 4045761241671 Tariff code: 84239090 Special features Painted cast iron Block Eco design Single calibration weight OIML Class M1 Origin: CN FAQ What does OIML Class M1 mean for daily use? OIML Class M1 defines the maximum permissible error for a working weight; the ECO Block weight meets that class so it can be used for routine verification where 250 mg tolerance at 5 kg is acceptable. Is this mass suitable for laboratory reference standards? The ECO Block weight is specified for medium-accuracy checks; for primary laboratory standards, higher OIML classes or certified reference masses are normally required. How should the weight be stored to maintain condition? Store the block on a stable, dry surface and avoid impacts; the painted cast iron finish helps protection, but careful handling will prolong usability. Can this weight be used on all types of scales? The mass is intended for use with scales and balances compatible with a 5 kg test weight and appropriate loading; confirm compatibility with the instrument’s loading area before use. Is a calibration certificate included with the product? A calibration certificate is not specified in the product data; if certification is required, arrange traceable calibration through an accredited laboratory or ask Metav Werkzeuge for available options. KERN — Address: — — Contact: —

Protective cover for FOB‑S scales that combines hygiene, simple replacement and compact storage; supplied as a five-piece set for fast replenishment. Benefit from a lightweight accessory that reduces downtime and helps maintain measuring accuracy. Order the FOB‑A11S05 directly via Metav Werkzeuge or ask our consultants if needed. FOB-A11S05 protective hood for FOB‑S scales — KERN The FOB-A11S05 is a protective hood for FOB‑S scales, designed to keep weighing equipment clean and shielded in workshop and retail environments. Pack of 5 protective hoods Compatible with FOB‑S scale series Lightweight: 0.08 kg per unit Rapid dispatch from Metav warehouse Keep scales accurate and hygienic with minimal effort The protective hood offers practical protection that prevents dust and light contamination from affecting weighing results. Used as a simple barrier, this accessory helps to maintain measurement accuracy and reduces the frequency of maintenance cycles. For businesses that rely on repeatable weighing — from production benches to checking stations — the cover acts as a cost-effective measure to preserve instrument performance and calibration intervals. Practical handling and fast replacement to reduce downtime Supplied as a pack of five, the set allows straightforward rotation: one hood on the scale, spares ready for immediate replacement. The low individual weight (0.08 kg) makes storage and handling uncomplicated, while the compact format means spare parts take little room in a workshop trolley or service kit. This convenience decreases interruption to processes and supports efficient workflows in busy industrial and commercial environments. Compatibility and supply assurance from a trusted partner Designed as an accessory for the FOB‑S series from KERN, the covers integrate into existing equipment ranges without modification. With Metav’s logistics presence in Emmerich and a broad product portfolio, restocking is straightforward and transparent — especially important for operations that require consistent supply. The combination of established manufacturer compatibility and reliable delivery supports uninterrupted operations and predictable procurement planning. For quick replenishment of scale accessories, rely on KERN quality and order the FOB‑A11S05 via Metav Werkzeuge in Emmerich, or request additional information from our consultants at info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: FOB-A11S05 Manufacturer: KERN GTIN: 4045761184626 Country of origin: CN Scope of delivery: 5 protective hoods Facts Weight: 0.08 kg Tariff number: 39269097 eClass: 24322502 Special features Compatible with FOB‑S scales Accessory for weighing equipment Rapid dispatch available from Metav stock FAQ What is included in the delivery? The delivery comprises a five-piece set of protective hoods (FOB-A11S05), supplied as a single pack. Which scales are these hoods compatible with? The covers are compatible with the FOB‑S series and intended as an accessory for KERN weighing equipment. How heavy is each hood? Each hood has a weight of 0.08 kg. Where is the product manufactured? The product origin is listed as CN (China). Are these hoods suitable for workshop use? Yes, the FOB-A11S05 is designed to provide light protection in workshop and commercial weighing environments. KERN — Manufacturer (origin: CN); For orders and enquiries: Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com, +49 2822 7131930