5000 kg Crane Scale, 2 kg Readability, LCD 23 mm, Peak‑Hold, 20 m Radio Range, EN 13155/EN 61010-1 - KERN
€1,220.00
Product information "5000 kg Crane Scale, 2 kg Readability, LCD 23 mm, Peak‑Hold, 20 m Radio Range, EN 13155/EN 61010-1 - KERN"
Take advantage of the combination of reliable high-capacity measurement, compact design and remote reading capability to keep lifts safe and documentation consistent. Order the device directly via Metav Werkzeuge or ask our consultants for application advice.
KERN HFC 5T-3 crane scale — compact, 5,000 kg capacity with 2 kg readability
The KERN HFC 5T-3 crane scale is a compact industrial load cell solution for heavy-duty weighing in production, logistics and construction environments.
- TÜV-certified to EN 13155 and EN 61010-1
- 5,000 kg capacity with 2 kg readability
- Compact, lightweight metal housing
- Wireless handheld terminal with 20 m range
Dependable heavy-lift measurement that meets safety norms
The crane scale delivers a clear technical advantage with its 5,000 kg capacity and 2 kg readability, underpinned by a strain gauge weighing system. Compliance with EN 13155 and EN 61010-1 and the TÜV test mark supports safe use with loose loads and electrical safety requirements, providing verifiable evidence for risk assessments and audits. This combination of capacity, repeatability and standards conformity reduces uncertainty in load handling and assists with regulatory documentation.
Compact construction that eases installation and integration
Engineered as a space-saving unit with a metal housing and a low net weight, the device is suitable where installation space is limited or where the scale must be integrated into existing lifting systems. The small footprint and robust build enable fixed or semi-permanent installation in cranes, portals and plant equipment, while maintaining mechanical integrity during frequent use. The compact form factor therefore supports more efficient floor layout and faster workflow turnaround.
Remote readout and clear display for safer operation
Equipped with an integrated radio module and a portable handheld terminal, the system enables remote monitoring of weighing results at distances up to 20 m, which improves operator safety during hazardous lifts. The LCD readout with 23 mm digit height, together with peak-hold and hold functions, ensures values remain readable even in unfavourable light or when the load is unstable. Long battery endurance of approximately 40 h and a 12 h charge time support extended shifts without interruption, increasing operational uptime.
Built for industrial environments and versatile applications
Constructed from durable materials and designed for rough conditions, the unit is suitable for industrial production, construction sites, freight centres, ports and recycling facilities. The device’s reproducibility and linearity figures support consistent results across repeated measurements, while the included multi-region power adapters (CH, EURO, UK) and a robust electrical supply range allow flexible deployment. These attributes make the instrument a reliable component for processes where traceable, repeatable weight data is essential.
Choose the KERN HFC 5T-3 for dependable heavy-lift measurement and contact Metav Werkzeuge in Emmerich for tailored application advice — email info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: HFC.5T-3
- Manufacturer: KERN
- GTIN: 4045761144613
- SKU: HFC.5T-3
- Origin: CN
Core specifications
- Capacity: 5,000 kg
- Readability: 2 kg
- Display digit height: 23 mm
- Operating temperature: 5°C–35°C
- Battery runtime: 40 h
- Charge time: 12 h
- Weight: 3.9 kg
- Housing dimensions: 90 × 61 × 255 mm
- Power input: 100 V–240 V, 50/60 Hz
- Reproducibility: 2 kg
- Linearity: ±4 kg
- Max. ambient humidity: 80%
Features & materials
- Material: metal housing
- Weighing system: strain gauge
- Display type: LCD
- Functions: peak-hold, hold, tare
- Radio: integrated wireless module, range up to 20 m
- Handheld terminal with carrying strap included
- Power adapters included: CH; EURO; UK
- Standards: EN 13155, EN 61010-1
- Typical applications: industry, construction, logistics, energy, recycling
FAQ
What maximum weight can the crane scale measure?
The KERN HFC 5T-3 crane scale measures up to 5,000 kg with a readability of 2 kg, making it suitable for a wide range of heavy-lift applications.
How is the weight displayed and retained for reading?
The unit provides results on an LCD with 23 mm digits; the hold and peak-hold functions in the handheld terminal allow the reading to be frozen for safer observation.
Can the weighing data be read at a distance from the load?
Yes, the integrated wireless module and handheld terminal enable remote reading at ranges of up to 20 m, allowing safe operation away from the load.
Which standards and certifications does the device comply with?
The device meets EN 13155 and EN 61010-1 standards and carries the TÜV indication, which covers loose-load safety and electrical safety requirements.
Is the scale suitable for outdoor and harsh industrial sites?
The scale’s metal construction, robust electronics and specified operating range make the instrument suitable for demanding industrial, construction and logistics environments.
Manufacturer: KERN — Origin: CN — SKU: HFC.5T-3
Zubehör
Take advantage of a secure lift connection and robust corrosion protection to keep weighing operations reliable. The combination of a safety latch, galvanised and painted cast steel construction and delivered rigging components ensures quick fitting and sustained service life — order the hook directly via Metav Werkzeuge or consult our advisers for suitability. YHA-03 hook with safety latch for crane scales (Galvanised cast steel) — KERN A YHA-03 hook with safety latch designed for crane scales, suited to systems with a 5 tonne capacity Safety latch for secure load retention Galvanised and painted cast steel construction Includes 2 shackles and one connecting link Compatible with HFA 5T-3 and HFC 5T-3 Safer lifts with an integrated safety latch The primary function of this crane hook is to provide a secure connection between load and scale. Fitted with a positive safety latch, the device minimises the risk of accidental disengagement during handling and transport. For weighing tasks in busy workshops and production lines, the latch contributes to predictable load retention and fewer interruptions to workflow, translating into more consistent measuring results and operational efficiency. Robust materials for long service life Constructed from galvanised and painted cast steel, the hook resists corrosion and wear in industrial environments. This surface treatment offers corrosion resistance that reduces maintenance intervals and extends usable life compared with untreated fittings. At a handling weight of 2 kg, the component balances sturdiness with manageable handling during installation and inspection, supporting routine maintenance without heavy-lift equipment. Delivered ready with essential rigging hardware The scope of delivery includes essential rigging parts so that the hook can be fitted quickly to the weighing assembly. Supplied components such as shackles and a connecting link allow immediate integration into standard crane-scale assemblies, saving set-up time and avoiding separate procurement steps. The pre-configured nature of the kit supports fast commissioning and reduces the chance of mismatched parts affecting measurement integrity. Designed for industrial weighing systems and compatibility Engineered for use with crane-scale systems in the five-tonne class, compatibility is specified for models including HFA 5T-3 and HFC 5T-3. The hook is suitable where reliable load attachment is required for routine weighing and material handling. Its design matches the needs of production, logistics and workshop environments that demand robust, repeatable lifting connections for accurate and safe weighing operations. Contact Metav Werkzeuge to secure KERN’s YHA-03 hook for corrosion-resistant, safety-latched lifting; our Emmerich team is available at info@metav-werkzeuge.com or +49 2822 7131930 to advise on suitability and delivery Technical data Article number: YHA-03 Manufacturer: KERN GTIN: 4045761193079 SKU: YHA Country of origin: DE Weight: 2 kg Material: galvanised and painted cast steel HS code: 84239010 Facts Weighing range compatibility: 5 tonne Weight: 2 kg Special features Safety latch Galvanised and painted cast steel Includes 2 shackles Includes 1 connecting link Compatible with HFA 5T-3 Compatible with HFC 5T-3 FAQ What load range is the hook intended for? The hook is intended for crane-scale systems in the 5 tonne class; compatibility is specified for models with a five-tonne weighing range such as the HFA 5T-3 and HFC 5T-3. What material and surface protection are used? The KERN YHA-03 hook is made from cast steel with galvanised and painted surface protection to improve corrosion resistance and durability in industrial settings. What is included in the delivery of the hook? Delivery of the YHA-03 hook includes rigging components: two shackles and one connecting link to enable direct assembly into a compatible crane-scale installation. Can the hook be used with other crane scales? Compatibility with other crane scales depends on the fitting dimensions and rated capacities; the YHA-03 is designed for five-tonne systems, so mechanical and rating checks are recommended before use. How does the safety latch improve daily operation? The safety latch on the YHA-03 reduces the risk of accidental load release during lifting and weighing, supporting safer handling and fewer operational interruptions. KERN, Germany, Contact not provided
Take advantage of a high-strength connection that combines long-term corrosion protection and secure fastening for reliable lifting operations; order the required shackle directly via Metav Werkzeuge or contact our consultants for compatibility details. YSC-01 Shackle for Crane Scale – High-strength, Hot-dip Galvanised Forged Steel A YSC-01 Shackle for the KERN crane scale, engineered as a curved, hot-dip galvanised forged-steel link with a painted screw bolt, suitable for crane scale models with a weighing range up to 5 t High-strength forged shackle, curved form Hot-dip galvanised, painted steel finish Includes painted screw bolt, secure fastening Suitable for crane scales up to 5 t Robust connection for heavy lifting The forged, curved bracket provides a reliable mechanical interface between load and instrument. Manufactured in hot-dip galvanised forged steel, the link is dimensioned to distribute forces evenly across the eye, reducing local stress peaks and helping to maintain measurement integrity under load. Compatibility with KERN HFA and HFC crane scales for models rated up to 5 t ensures the shackle integrates with common industrial weighing systems and supports consistent, traceable lifting operations. Secure fastening that simplifies handling A painted screw bolt secures the connection and is designed for straightforward installation and removal while maintaining a high level of locking security. The secure screw bolt reduces the risk of accidental loosening during use and aids rapid assembly in workshop and site environments. At a handling weight of approximately 1.5 kg, the component is easy to position without compromising robustness, making routine changes or inspections uncomplicated for technicians and service staff. Low maintenance for continuous operation The hot-dip galvanised finish and painted bolt combine to offer enhanced corrosion resistance, extending service life in galvanic or outdoor environments and minimising downtime for replacement. As a German-made accessory from KERN, the design focuses on durability and fit with established crane weighing ranges, providing a cost-effective way to keep weighing setups operational without compromising safety or performance. Contact Metav Werkzeuge in Emmerich for precise compatibility checks or to discuss order options; our consultants can confirm suitability for your KERN crane scale models and provide prompt supply from our German warehouse (info@metav-werkzeuge.com / +49 2822 7131930) Technical data SKU: YSC-01 GTIN: 4045761193086 Manufacturer: KERN Country of origin: DE Core figures Weight: 1.5 kg Suitable for weighing range: up to 5 t Tariff number: 84239010 Special features Hot-dip galvanised forged-steel bracket Curved form for even load distribution Painted screw bolt for secure fastening Compatible with KERN HFA and KERN HFC crane scales Scope of delivery includes 2 shackles with painted screw bolt FAQ Is the shackle compatible with KERN crane scales? The YSC-01 shackle is compatible with KERN HFA and HFC crane scales for models with a weighing range up to 5 t. What material and corrosion protection does the shackle use? The shackle is made from forged steel with a hot-dip galvanised finish and a painted screw bolt to provide enhanced corrosion resistance. What is included in the delivery? The scope of delivery lists 2 shackles with painted screw bolt as supplied items for this SKU (YSC-01). How heavy is the shackle and how does that affect handling? The component weighs approximately 1.5 kg, allowing for easy handling during installation while maintaining required robustness. Manufacturer: KERN; Distributor: Metav Werkzeuge, Emmerich, Germany; Contact: info@metav-werkzeuge.com, +49 2822 7131930