Reliable precision for drilling tough materials
The HSS-E twist drill DIN 338 type N is engineered for process-reliable drilling of hard, difficult-to-machine materials, delivering exceptional heat resistance and wear life thanks to its 5% cobalt alloyed high-speed steel. Its 135° flat point with cross grind enables immediate self-centring and reduces the need for centre punching, while the ground flutes ensure smooth chip evacuation for consistent performance in stainless steels and high-strength steels. This short, ground twist drill combines durable cutting geometry, excellent thermal stability and dependable repeatability for both hand and pillar drills.
11mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Der kurze Spiralbohrer vereint hohe Stabilität durch die reduzierte Auskraglänge mit der Materialgüte HSS-E und 5% Kobaltlegierung für zähe Werkstoffe; die geschliffene Ausführung sorgt für saubere Bohrbilder. Für präzise Metallbohrungen bestellen Sie direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT — kurzer HSS‑E Bohrer für Metall Spiralbohrer von MetavCUT, kurze Ausführung, ideal für präzise Bohrungen in Stahl und Nichteisenmetallen HSS-E mit 5% Kobaltlegierung geeignet für härtere Werkstoffe Kurze Ausführung für höhere Stabilität und weniger Auslenkung Geschliffen nach DIN 338 für präzise Rundlaufgenauigkeit Spitzenwinkel 135° für problemloses Anbohren von Edelstahl Für Handbohrmaschine und stationäre Bohrmaschinen geeignet Kompakte Bauform sorgt für sichere und gerade Bohrungen Die kurze Bauform reduziert die Auskraglänge und minimiert damit Vibrationen sowie Seitenauslenkung. Das Ergebnis sind geradere Bohrungen und geringeres Bruchrisiko bei üblicher Belastung, besonders beim Einsatz in Handbohrmaschine und stationären Säulenmaschinen. Vorteil für Anwender: Weniger Nacharbeit und konstantere Bauteilqualität. Präzisionsschliff und Material für saubere Lochbilder Der geschliffen gefertigte Bohrer bietet scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Austritte und maßgenauere Bohrlöcher ermöglicht. Die HSS-E Legierung mit 5% Kobalt erhöht die Warmfestigkeit und Standzeit bei höheren Schnittgeschwindigkeiten, sodass sich der Bohrer besonders für legierte und unlegierte Stähle eignet. Anwendungsfeld und Zielgruppe: Praktiker und Profis Dieser kurze Spiralbohrer richtet sich an Werkstätten, Montagebetriebe und ambitionierte Heimwerker, die präzise Metallbohrungen benötigen. Die DIN 338 Klassifikation und die geschliffene Ausführung machen den Bohrer zur guten Wahl für Anwendungen, bei denen Präzision wichtiger ist als extremes Tiefenbohren. Empfehlung: Bei anspruchsvollen Materialien Kühlung und geeignete Schnittparameter verwenden. Empfehlung: Setzen Sie auf den MetavCUT HSS‑E Spiralbohrer für hochwertige Metallbohrungen und kontaktieren Sie bei Fragen unser Team per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 47110-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten Durchmesser: 11 mm Gesamtlänge: 142 mm Spirallänge: 94 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-E (Schnellarbeitsstahl mit Kobaltanteil) Farbe: 5% kobaltlegiert Ausführung: kurz Schaftausführung: geschliffen (CNC Schliff für hohe Genauigkeit) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine FAQ Was macht die kurze Ausführung des Bohrers vorteilhaft? Die kurze Ausführung reduziert Auslenkung und Vibrationen und ermöglicht mit dem MetavCUT Spiralbohrer eine stabilere Führung bei Metallbohrungen, was zu geraderen Bohrlöchern führt. Für welche Materialien ist der MetavCUT Spiralbohrer geeignet? Der MetavCUT Spiralbohrer mit HSS‑E und 5% Kobalt eignet sich für legierte und unlegierte Stähle, Gusseisen, Nichteisenmetalle und Kunststoffe. Warum ist der Schliff wichtig beim Spiralbohrer 47110-FDA? Der geschliffene Schaft und die geschliffenen Spannuten sorgen für hohe Rundlaufgenauigkeit und scharfe Schneiden, was im Fall des Modells 47110-FDA saubere Bohrlöcher und längere Standzeiten bewirkt. Welchen Vorteil bringt der Spitzenwinkel von 135°? Der Spitzenwinkel von 135° am MetavCUT Spiralbohrer verbessert das Anbohrverhalten in harten Werkstoffen wie Edelstahl und verringert das Ausbrechen am Ein- und Austritt. Kann der Spiralbohrer in der Handbohrmaschine eingesetzt werden? Ja, der Spiralbohrer ist für den Einsatz in der Handbohrmaschine konzipiert und eignet sich für alltägliche Werkstatt‑ und Montagearbeiten im Metallbereich.
12.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Short HSS‑E Type N Drill, 12.1 mm, 135° Tip, 5% Cobalt‑Alloyed, DIN 338, Fully Ground Shank The Twist Drill is a short HSS‑E Type N drill designed for precise metal drilling with a 12.1 mm diameter and a 135° tip for hard materials. Short Design for greater Stability and Precision 12.1 mm Diameter optimized for Metalwork 135° Tip suited for Hard Materials like Stainless HSS‑E with 5% Cobalt for improved Heat Resistance Fully Ground Shank for excellent Runout Accuracy Outstanding material performance for demanding metalwork Made from HSS‑E with 5% cobalt, this short twist drill delivers improved Heat Resistance and wear performance compared with standard HSS. The cobalt alloy increases hot hardness so the cutting edge retains strength at higher temperatures, which benefits longer tool life under continuous drilling or when coolant is limited. As a result, users experience fewer regrinds and more consistent hole quality during production tasks. Short geometry for maximum precision and stability The reduced overall length and shorter overhang provide notably higher rigidity and less deflection than long drills, so vibrations are minimised and hole positions stay accurate. The Fully Ground flute geometry ensures sharp cutting lips and high concentricity, producing clean, burr‑reduced holes in metal. This design is especially beneficial for operations where precise hole tolerances and repeatability matter. Optimised geometry for hard materials and versatile use Equipped with a 135° Tip, the bit penetrates hard and tough steels with less walking at the start and an improved centring behaviour, making it suitable for stainless steel and other high‑strength alloys. The short flute length (101 mm Spiral Length) and total length of 151 mm support both stationary drilling machines and handheld Drilling Machines for repair, maintenance and workshop production. The Type N normal spiral is the classic choice for metalworking. Built to DIN 338 and engineered for professional workflows Manufactured to DIN 338, this short twist drill conforms to standardised dimensions and tolerances for short Cylindrical Shank HSS drills. The ground variant offers very sharp edges and consistent runout, while requiring careful handling and appropriate coolant to reduce brittleness. For best results, use with suitable lubricants and steady feed to maximise tool life and hole surface finish. Strong recommendation: choose the MetavCUT HSS‑E Twist Drill for demanding metal applications — for technical advice or to check suitability contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47121-FDA Diameter: 12.1 mm Tip Angle: 135° Type: Type N Execution: Short Material: HSS‑E Colour / Alloy: 5% cobalt‑alloyed Shank Finish: Fully Ground Spiral Length: 101 mm Total Length: 151 mm For Drilling Machine: Drilling Machine / Hand Drilling Machine compatible Application: Drills for Metal Standard: DIN 338 Model Series: Standard Line Shaft Designation: Cylindrical shank, ground geometry Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill (Type N) is designed primarily for metalworking; it is especially suited to drilling alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics. Its short design and HSS‑E composition make it effective for precise holes in harder materials. Which three drill types should be known for different materials? When selecting tools, consider the three main groups: Metal drills (such as HSS or HSS‑E twist drills), Wood drills, and Stone/Concrete drills. The MetavCUT Twist Drill falls into the metal drill category. What advantages does the short MetavCUT Twist Drill offer for production work? A short design reduces overhang and increases rigidity, which improves positional accuracy and reduces chatter during serial drilling operations. Combined with the 5% cobalt alloy, the tool maintains cutting performance under higher thermal stress. Why is DIN 338 important for this short twist drill? DIN 338 standardises dimensions and tolerances for short cylindrical‑shank twist drills, ensuring interchangeability and predictable performance. The MetavCUT Twist Drill produced to DIN 338 provides consistent fit, runout and geometry for reliable workshop use.
12.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Der kurze Spiralbohrer verbindet hohe Stabilität und präzise Bohrbilder durch HSS‑E‑Material und geschliffenen Schaft; ideal für Metallbearbeitung an Handbohrmaschinen und stationären Maschinen. Nutzen Sie die Kombination aus 135°‑Spitzenwinkel, DIN 338‑Norm und kobaltlegierter Legierung für zuverlässige Resultate und bestellen Sie diesen Bohrer direkt über Metav oder lassen Sie sich von unserer technischen Beratung unterstützen. Spiralbohrer Typ N von MetavCUT (12,2 mm, kurz, HSS‑E) Der Spiralbohrer ist ein kurzer HSS‑E Metallbohrer, konzipiert für präzise Bohrungen in legiertem und unlegiertem Stahl sowie Gusseisen und Nichteisenmetallen. Kurze Ausführung für hohe Stabilität HSS‑E mit 5% Kobaltlegierung Geschliffener Schaft für präzisen Rundlauf 135° Spitzenwinkel für harte Werkstoffe DIN 338 Norm, Typ N für Metallbohrungen Stabilität und Präzision bei Metallbohrungen Mit der kurzen Ausführung reduziert sich die Auskraglänge deutlich, wodurch die Torsionsfreiheit erhöht und Vibrationen minimiert werden. Diese Bauweise sorgt für ein gleichmäßiges Bohrbild und weniger Verweldungen bei Durchmessern im Standard‑Bereich. Anwender profitieren von einem ruhigen Lauf und einer verbesserten Maßhaltigkeit, besonders bei Bohrungen in Stahl und Gusseisen. Material und Schneidgeometrie für längere Standzeit Der Einsatz von HSS‑E‑Werkstoff in Verbindung mit einer 5% Kobaltlegierung erhöht die Warmfestigkeit und Verschleißresistenz. Die geschliffene Geometrie erzeugt scharfe Schneidkanten und einen präzisen Rundlauf, was saubere Bohrlöcher ermöglicht. Durch den 135°‑Spitzenwinkel wird die Anbohrstabilität bei harten Werkstoffen verbessert und das Einklemmen beim Anbohren reduziert. Maschinenkompatibilität und typische Anwendungen Der Bohrer ist für den Einsatz an Handbohrmaschinen und stationären Bohrmaschinen ausgelegt und entspricht der DIN 338‑Norm für kurze Spiralbohrer mit Zylinderschaft. In Werkstatt und Montage eignet sich der Bohrer besonders für dünne bis mittlere Bleche, Profile und allgemeine Metallbearbeitung im Alltagsgebrauch. Für Serienbearbeitung in gehärtetem Stahl empfiehlt sich eine ergänzende Werkzeugstrategie. Anwendungstipps für sichere und präzise Ergebnisse Vorbohren bei größeren Durchmessern, Einsatz von Kühlschmierstoff bei Stahl und moderate Schnittgeschwindigkeit verlängern die Standzeit. Die geschliffene Ausführung empfiehlt sich für stationäre Anwendungen und präzise Bohrbilder; bei Handbetrieb auf ruhigen Vorschub achten. Beachten Sie die Cluster‑Empfehlung für den Standard‑Bereich: bei hoher Präzision zuvor anpunktieren. Für zuverlässige Metallbohrungen empfehlen wir den kurzen HSS‑E Spiralbohrer von MetavCUT — bestellen Sie bei Metav direkt oder kontaktieren Sie unsere technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 47122-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 12,2 mm Gesamtlänge: 151 mm Spirallänge: 101 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-E (Schnellarbeitsstahl mit Kobalt) Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N Farbe: 5% kobaltlegiert Für Bohrmaschine: Handbohrmaschine Norm: DIN 338 FAQ Für welche Werkstoffe eignet sich der Spiralbohrer von MetavCUT? Der Spiralbohrer von MetavCUT (Typ N, SKU 47122-FDA) eignet sich für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe; die 5% Kobaltlegierung verbessert die Warmfestigkeit bei harten Werkstoffen. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der kurze HSS‑E Bohrer ist für Handbohrmaschinen und stationäre Bohrmaschinen konzipiert; durch die kürzere Auskraglänge bietet der Bohrer erhöhte Stabilität bei handgeführten Anwendungen. Warum ist der Spitzenwinkel 135° vorteilhaft? Ein Spitzenwinkel von 135° erleichtert das Anbohren harter Werkstoffe, reduziert das Wandern und verbessert die Vorschubkraftübertragung; das Ergebnis sind maßhaltigere und sauberere Bohrlöcher mit weniger Gratbildung. Welche Vorteile bringt die geschliffene Schaftausführung? Die geschliffene Schaftausführung sorgt für höhere Rundlaufgenauigkeit und schärfere Schneiden, was präzise Bohrbilder ermöglicht; solche Bohrer sind ideal für genaue Metallbearbeitung unter Kühlung. Wie viele Bohrer sind in einer Verpackungseinheit? Die Verpackungseinheit enthält 5 Stück, geliefert als Satz von kurzen Spiralbohrern gemäß Standard Line von MetavCUT.
12.3mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill short Type N — Diameter 12.3 mm · 135° Tip · 5% Cobalt-Alloyed · HSS‑E · DIN 338 · Fully‑Ground The Twist Drill short Type N is a precision HSS‑E metalworking drill designed for stable, high‑accuracy holes in hard materials on drilling machines and hand drills. Short Design for Higher Stability and Precision 5% Cobalt-Alloyed HSS‑E for Increased Wear Resistance 135° Tip Angle for Easier Entry into Hard Materials Fully-Ground Shank for High Runout Accuracy Conforms to DIN 338 for Standardised Quality Maximum Precision through a Short, Stable Geometry The short construction of this Twist Drill reduces the unsupported length outside the chuck, which significantly improves Stability and minimises deflection during drilling. This leads to more consistent hole diameter and better surface finish in demanding operations. For professional workshops and maintenance tasks, the reduced tendency to bend makes this design especially suitable when tight tolerances are required. Durable Alloy and Tip Geometry for Hard Materials Manufactured from HSS‑E with 5% Cobalt, the drill offers higher red hardness and wear resistance compared with standard HSS. The 135° Tip is optimised for hard and stainless steels: it reduces walking on the surface and shortens the time to penetrate the workpiece. HSS‑E (High‑Speed Steel with Cobalt) means the material retains hardness at higher temperatures, which improves tool life under continuous cutting and when coolant access is limited. Ground Flutes and Type N Spiral for Accurate Metal Drilling A fully‑ground shaft and sharpened flute geometry produce sharp cutting edges and excellent runout characteristics. Type N refers to a normal spiral suitable for metal drilling; the ground manufacturing process yields high concentricity and clean hole walls, while the short flute length promotes rigidity. For everyday metalworking—cast iron, alloyed and unalloyed steel, non‑ferrous metals and many plastics—this geometry balances cutting performance and service life. Practical Guidance and Best Use Cases Because of its short form and alloy composition, this drill performs best with steady clamping and, where possible, cutting fluid to carry away heat and chips. It is intended for use on drilling machines and compatible hand drills when rigidity is ensured. For diameters under 6 mm, the short, rolled or ground HSS design reduces breakage risk; for larger diameters the cobalt content and tip geometry help maintain penetration and tool life. Who Benefits Most from This Tool Workshop professionals, maintenance technicians and metal fabricators will appreciate the combination of Precision, Durability and conformity to DIN 338. The tool is designed to deliver repeatable results in production and repair contexts where accurate, burr‑reduced holes are required. The Standard Line series offers an industrial‑grade solution for repetitive metal drilling tasks. Strongly recommended for precision metalworking: choose MetavCUT short Twist Drill for reliable performance, and contact METAV Werkzeuge for expert advice and support — eMail: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 47123-FDA Type: Typ N Diameter: 12.3 mm Tip angle: 135° Execution: kurz (short) Material: HSS‑E Colour / Alloy: 5% cobalt-alloyed Shank execution: geschliffen (fully ground) Overall length: 151 mm Spiral length: 101 mm For drilling machine: Drilling Machine Model series: Standard Line Standard: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N short is primarily used for metalworking; it excels in drilling alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics due to its HSS‑E composition and 135° tip, which together provide better penetration and wear resistance in hard materials. Which three drill types are commonly distinguished? The main categories are: Metal drills (for steel and alloys), Wood drills (timber‑specific geometry) and Stone/Concrete drills (for masonry and concrete). For what is a Twist Drill typically used? A Twist Drill is mainly applied in the machining of high‑strength materials and for larger hole diameters; its shape is easy to sharpen and withstands greater loads, making it suitable for demanding metal drilling tasks. Why are Twist Drills sharpened (repointed)? Sharpening reduces the cross‑edge at the tip, lowering friction forces and thus the required feed force; it also improves centring of the tip in the workpiece and yields cleaner, more accurate holes.
12.4mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Die Kombination aus HSS-E mit 5% Kobalt, der kurzen Ausführung und dem geschliffenen Schaft sorgt für deutlich höhere Stabilität und präzise Bohrbilder bei Metallarbeiten; profitieren Sie von der geringen Auskraglänge für weniger Schwingung und längerem Werkzeugleben. Bestellen Sie den Artikel direkt bei Metav oder fragen Sie unsere technische Beratung bei Bedarf an. Spiralbohrer 12,4 mm HSS-E Kurz (DIN 338) von MetavCUT Der Spiralbohrer in kurzer Ausführung eignet sich für präzise Metallbohrungen an Handbohrmaschine und stationären Anlagen und bietet erhöhte Stabilität bei harten Werkstoffen. Kurzform für erhöhte Stabilität bei Bohrungen HSS-E mit 5% Kobaltlegierung für Stahl Geschliffener Schaft nach DIN 338 für Präzision 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und Stationärbetrieb Mehr Präzision durch die kurze Ausführung Die kurze Bauform reduziert die Auskraglänge und minimiert damit Schwingungen und Verkantungsrisiken. Für Anwender bedeutet das konstantere Bohrbilder und eine geringere Bruchgefahr bei Durchmessern unter 13 mm. Diese Bauweise ist ideal, wenn Stabilität und Wiederholgenauigkeit gefragt sind, zum Beispiel bei Montagearbeiten oder Instandsetzungen, bei denen saubere Passungen erforderlich sind. Materialvorteile: HSS-E und 5% Kobalt erklärbar HSS-E steht für Schnellarbeitsstahl mit erhöhtem Kobaltanteil. Die Zugabe von 5% Kobalt verbessert Warmfestigkeit und Verschleißfestigkeit, weshalb dieser Bohrer besonders geeignet ist für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle. Bei härteren Materialien sorgt der Werkstoff dafür, dass die Schneidkante länger scharf bleibt und die Standzeit steigt. Schleifen, Spitzenwinkel und Schneidgeometrie Der geschliffene Schaft und die präzise CNC-geschliffene Geometrie liefern sehr scharfe Schneiden und hohe Rundlaufgenauigkeit. Der 135° Spitzenwinkel ist speziell für harte Werkstoffe ausgelegt und reduziert das Ausbrechen beim Anbohren; dadurch verkürzt sich die Anbohrzeit. Kurz gefasst: bessere Zentrumsaufnahme, sauberere Ausbrüche und reproduzierbare Ergebnisse. Einsatzgebiet und Anwendernutzen Diese Ausführung des Spiralbohrers ist für den Einsatz in Werkstatt und Produktion ausgelegt: geeignet für Handbohrmaschine ebenso wie für stationäre Maschinen. Anwender profitieren von der Kombination aus robuster Schneidleistung und einfacher Handhabung. Für tiefe oder sehr präzise Passungen empfiehlt es sich, vorzuplanen und gegebenenfalls anzupressen oder vorzuarbeiten, um die bestmögliche Genauigkeit zu erreichen. Normen, Typ und Verarbeitungshinweise Die Einhaltung der DIN 338 garantiert standardisierte Abmessungen und Kompatibilität mit gängigen Spannfuttern. Als Typ N Normalspirale ist der Bohrer universell für Metallbearbeitung ausgelegt. Beim Einsatz empfiehlt sich Kühlung bei größeren Vorschüben und das Anbohren kleinerer Durchmesser vor dem Aufbohren bei anspruchsvollen Werkstoffen, um Spannungen und Ausbrüche zu vermeiden. Empfehlung: Für präzise Metallbohrungen empfiehlt MetavCUT den Einsatz dieses kurz ausgeführten HSS-E Spiralbohrers; bei Unsicherheiten berät Sie Metav persönlich per E‑Mail oder Telefon unter info@metav-werkzeuge.com bzw. +49 2822 7131930 Produkteigenschaften Artikelnummer: 47124-FDA Bezeichnung: Spiralbohrer Hersteller: MetavCUT Serie: Standard Line Norm: DIN 338 Material: HSS-E Daten Durchmesser: 12,4 mm Gesamtlänge: 151 mm Spirallänge: 101 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Ausführung: kurz Schaftausführung: geschliffen Typ: Typ N Farbe: 5% kobaltlegiert Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall / Drills for metal FAQ Für welche Werkstoffe ist dieser Bohrer am besten geeignet? Der Spiralbohrer von MetavCUT mit HSS-E und 5% Kobalt eignet sich besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoff, sodass er in vielen Metallbearbeitungsaufgaben zuverlässig eingesetzt werden kann. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung und der geschliffene Schaft machen den Bohrer kompatibel mit Handbohrmaschine; bei Handbetrieb ist auf feste Spannaufnahme und moderate Vorschubgeschwindigkeit zu achten, um Bruchrisiken zu minimieren. Ist dieser Bohrer für Edelstahl geeignet? Dank des erhöhten Kobaltanteils und des 135° Spitzenwinkels eignet sich der Bohrer gut für harte Werkstoffe wie Edelstahl; Kühlung und reduzierte Schnittgeschwindigkeit erhöhen hierbei die Standzeit. Wie verhält sich der geschliffene Bohrer gegenüber rollgewalzten Ausführungen? Geschliffene Bohrer bieten schärfere Kanten und höhere Rundlaufgenauigkeit, was sauberere Bohrbilder ermöglicht; dafür sind sie tendenziell weniger zäh als rollgewalzte Varianten und profitieren von stationärem Einsatz und Kühlung. Welches Zubehör wird empfohlen, um beste Ergebnisse zu erzielen? Für optimale Resultate empfiehlt sich ein Zentrierbohrer bei hoher Präzision, geeignete Kühlschmierstoffe bei harten Werkstoffen und eine präzise Spannaufnahme im Bohrfutter; die SKU 47124-FDA lässt sich so am effizientesten nutzen.
12.5mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Short HSS‑E Metal Drill, 12.5 mm, 135° Tip, Type N, 5% Cobalt‑Alloyed, Fully Ground Shank, DIN 338 (MetavCUT Standard Line) A short Twist Drill designed for precision metal drilling with Drilling Machines and Hand Drills, especially where stability and clean holes in hard materials are required. Short Design: higher Stability and Precision 12.5 mm Diameter for robust Metal Holes 135° Tip Angle for Hard Materials like Stainless Steel 5% Cobalt-Alloyed HSS‑E for improved Heat Resistance Fully Ground Shank, DIN 338 Standard Compliance Durable Material for demanding metalworking Hardened HSS‑E combined with a 5% cobalt‑alloyed composition ensures that the drill retains hardness and resists softening at higher cutting temperatures. This material choice increases the tool life when working with alloyed and unalloyed Steel, Cast Iron and Nichteisenmetals. The metallurgical makeup reduces wear during continuous operation, so fewer tool changes are necessary and machining runs more economically. Stable geometry for precise holes in tough materials Thanks to the Short Design and a 12.5 mm Diameter, the tool shows reduced overhang and less tendency to deflect, which improves roundness and positional accuracy of holes. The 135° Tip Angle shortens initial penetration time and is tailored to harder materials such as Stainless Steel; combined with the Type N normal spiral this provides a reliable entry and controlled chip formation for clean bores. Ground flutes and shank for concentricity and finishing quality The version with a Fully Ground Shank (HSS‑G style) features CNC‑ground flutes that deliver sharp cutting edges and high runout accuracy. This results in smoother hole walls and improved surface finish compared with rolled drills. For production or assembly tasks where hole quality matters, this geometry reduces rework and supports consistent assembly fits. Recommended use, handling and machine compatibility Engineers and professional metalworkers will find this Twist Drill suitable for stationary and portable machines like conventional Drilling Machines and robust Hand Drills when appropriate clamping is used. For best results apply adequate cutting fluid and moderate feed to prevent premature breakage; coolant is especially advisable for deeper or continuous drilling in harder Steels. This short variant is particularly advantageous for precision operations and for drilling into thick or hardened components. Choose MetavCUT’s Short HSS‑E Twist Drill for professional metalworking and contact METAV Werkzeuge for expert, personalised advice by eMail, phone or WhatsApp: info@metav-werkzeuge.com • +49 2822 7131930 • +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47125-FDA Diameter: 12.5 mm Overall Length: 151 mm Spiral Length: 101 mm Tip Angle: 135° Type: Type N Material: HSS‑E Execution: Short Colour: 5% cobalt‑alloyed Shank: Fully Ground Model Series: Standard Line Norm: DIN 338 Application: Drills for Metal For use with: Drilling Machine / Handbohrmaschine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill suitable for and which materials can it handle? The MetavCUT Twist Drill (Type N) is primarily designed for Metal work; its HSS‑E composition and 5% cobalt‑alloyed formulation make it suitable for alloyed and unalloyed Steel, Cast Iron and many Non‑Ferrous Metals, offering improved heat resistance during demanding drilling tasks. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and for larger hole diameters. Its form is relatively easy to regrind and it withstands substantial loads. The shape and material make it especially suitable for metalworking operations. Which three drill types exist? The main types are: Metal drills (e.g. Twist Drill), Wood drills, and Stone/Concrete drills. Why are Twist Drills point‑sharpened? Point sharpening reduces the secondary cutting edge at the tip of the Twist Drill. By sharpening, frictional forces are significantly reduced, which lowers the required feed forces and improves centring of the drill tip in the workpiece.
12.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Spiralbohrer) — 12.6 mm, Type N, HSS‑E, Short, 135°, 5% cobalt‑alloyed, DIN 338 (MetavCUT) The Twist Drill Type N is a short, precision tool designed for stable, high‑performance metal drilling in demanding applications with a 135° point angle. Short design for increased stability 135° point angle for hard materials HSS‑E for high wear resistance Fully ground shank for precise runout Conforms to DIN 338 for consistent quality High‑precision drilling for metal components that demand stability and accuracy Short geometry delivers measurable advantages when the task is high‑precision metalworking. The Short construction of this Twist Drill reduces overhang and bending moment, resulting in significantly improved Stability and lower runout during cutting. Combined with the HSS‑E substrate and 5% cobalt alloying, the tool sustains edge integrity under elevated temperatures, which means cleaner holes and longer tool life when machining alloys and hardened steels. Faster penetration and reduced breakout when working with tough materials A 135° point angle reduces the tendency to wander at the moment of contact and spreads cutting forces to suit harder substrates. This geometry shortens contact time while maintaining control, so holes start cleanly without excessive burr formation. The Type N normal spiral profile is optimised for metal, offering reliable chip evacuation and stable cutting for a wide range of ferrous and non‑ferrous alloys. Manufactured accuracy and material benefits for repeatable results The Fully ground flute geometry produces sharp cutting lips and excellent concentricity, which translates to precise, repeatable hole diameters and superior surface finish. The HSS‑E material with 5% cobalt provides enhanced hot hardness and toughness, making the drill suitable for stainless steel, alloyed steel, cast iron and certain non‑ferrous materials. For workshop environments where predictable performance matters, these characteristics reduce rework and tool change frequency. Suitable applications and recommended working conditions This Twist Drill is particularly suited to workshop and on‑machine drilling where short length and rigidity are required, including handheld drilling machines and stationary drilling centres. Use moderate cutting speeds, adequate coolant for metallic applications and secure clamping to exploit the drill’s precision. For through‑holes up to medium depths typical of general metal fabrication, the tool provides efficient chip removal and reliable centring. MetavCUT’s HSS‑E short Twist Drill is recommended for demanding metal drilling tasks — for tailored technical advice or to confirm suitability for a specific application, contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical information Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 47126-FDA Diameter: 12.6 mm Point angle: 135° Type: Type N Material: HSS‑E (High Speed Steel, cobalt alloyed) Colour/Alloy: 5% cobalt‑alloyed Length (Spiral): 101 mm Overall length: 151 mm Shank finish: Fully ground Execution: Short Applicable Machine: Drilling Machine (Handbohrmaschine) Model Series: Standard Line Standard: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The Twist Drill from MetavCUT is primarily used for machining high‑strength materials and larger drill diameters; its geometry and material composition make it resilient under heavy loads. The short design and HSS‑E composition allow it to resist heat and maintain cutting performance when drilling alloyed and unalloyed steels, cast iron, non‑ferrous metals and plastics. Which three drill types are commonly available? Three common drill categories are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for metalworking tasks with features such as a 135° point angle and a fully ground flute geometry.
12.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 12.7 mm, 135° Point, 5% Cobalt‑Alloyed, Short, HSS‑E, DIN 338, Fully Ground by MetavCUT The Twist Drill Type N is a short HSS‑E drill designed for precise metalworking with a 12.7 mm diameter and a 135° point angle, suitable for use in drilling machines. Short design for high stability 12.7 mm Diameter for precise holes 135° point angle for hard materials Fully ground HSS‑E with 5% cobalt alloy Outstanding precision and reduced deflection for metalworking The short geometry of this Twist Drill reduces the exposed length and therefore significantly lowers the tendency to bend under load, resulting in cleaner holes and better positional accuracy. The reduced cantilever length improves lateral stiffness, which means less wobble when machining tougher materials. For workshop applications that demand repeatable hole quality, the shorter construction offers measurable advantages in stability and process control. Material composition that improves heat resistance and wear life Manufactured from HSS‑E with 5% cobalt, the drill combines the toughness of high‑speed steel with enhanced hot hardness for longer life under elevated temperatures. This composition is particularly advantageous when working with alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics, since it helps maintain cutting edge geometry during sustained cutting. The 135° point angle further supports drilling in harder materials by reducing initial cutting forces and improving centring. Fully ground geometry for sharp edges and precise bores The fully ground flute and cutting geometry (geschliffen) produce very sharp edges and high concentricity, delivering clean, burr‑reduced bores and excellent roundness. Ground drills are typically favoured for demanding metalworking where hole quality matters most; they offer superior runout characteristics compared with rolled alternatives. Note that ground HSS‑E drills perform best with appropriate clamping and coolant use to mitigate breakage risk during heavy or interrupted cuts. Designed for professionals who require repeatability and control This short Type N twist drill is aimed at machinists and maintenance technicians who prioritise precise hole placement and minimal deflection. It is optimised for use in stationary and portable drilling machines and performs well in tasks requiring high positional accuracy. To get the best out of the tool, use steady feeds, adequate clamping and coolant when drilling into harder alloys — this ensures consistent tool life and hole quality across batches. Choose the MetavCUT Twist Drill Type N for precise, stable metal drilling — for expert technical advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Technical data Designation: Twist Drill Brand: MetavCUT SKU: 47127-FDA Diameter: 12.7 mm Point angle: 135° Type: Type N Execution: Short Colour / Alloy: 5% cobalt-alloyed Material: HSS-E Shank finish: Fully ground Spiral length: 101 mm Overall length: 151 mm For drilling machine: Drilling Machine Application: Drills for metal Standard: DIN 338 Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. Its design and material (HSS‑E with 5% cobalt) make it robust under higher temperatures and appropriate for demanding metalworking tasks. Which three drill types are commonly distinguished? The three main drill categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for machining metals.
12.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Kombination aus HSS‑E mit 5% Kobaltlegierung, Kurzausführung und geschliffenem Zylinderschaft sorgt für hohe Stabilität und präzise Bohrbilder. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT – HSS‑E Kurzbohrer 12,8 mm Der Spiralbohrer ist ein kurzer HSS‑E Metallbohrer für präzise Bohrungen in legiertem und unlegiertem Stahl sowie Nichteisenmetallen HSS‑E mit 5% Kobaltlegierung Kurzausführung für hohe Stabilität Geschliffener Zylinderschaft für präzise Bohrung 135° Spitzenwinkel für harte Werkstoffe Normkonform nach DIN 338 Mehr Stabilität bei präziser Bohrführung Die Kurzausführung reduziert die Auskraglänge und damit Vibrationen sowie Verbiege‑Tendenzen beim Bohren. Durch die Kombination aus HSS‑E und einer 5% Kobaltlegierung erhöht sich die Wärme‑ und Verschleißfestigkeit gegenüber einfachem HSS, sodass saubere Bohrbilder auch bei anspruchsvollen Materialien erhalten bleiben. Der geschliffene Zylinderschaft trägt zusätzlich zur Rundlaufgenauigkeit bei, was besonders bei sichtbaren oder passungsrelevanten Bohrungen von Vorteil ist. Geeignet für den Alltagseinsatz in Werkstatt und Montage Mit einem Durchmesser von 12,8 mm liegt dieser Bohrer im Standard‑Bereich und ist damit gut geeignet für Handgeführte Maschinen wie die Handbohrmaschine sowie für stationäre Säulenbohrmaschinen bei normalen Gewerbe‑ und Werkstattaufgaben. Typische Einsatzfelder sind dünne bis mittlere Bleche, Profile und allgemeine Metallbearbeitung. Für sehr tiefe Löcher (über das Fünffache des Durchmessers) oder gehärtete Serienfertigung sind spezialisierte Werkzeuge zu bevorzugen. Geometrie, Norm und Werkstoff richtig eingesetzt Der Spitzenwinkel 135° sorgt für kontrollierten Anbohrdruck und bessere Zerspanung in harten Werkstoffen wie Edelstahl. Die Ausführung geschliffen (HSS‑G) liefert schärfere Schneiden und höhere Rundlaufgenauigkeit, erfordert jedoch eine angepasste Kühlung und stationäre Werkzeuge bei sehr anspruchsvollen Anwendungen. Die Einordnung nach DIN 338 bestätigt die Klassifizierung als kurzer Spiralbohrer mit Zylinderschaft und macht die technischen Anforderungen transparent. Empfehlung: Den MetavCUT HSS‑E Kurz‑Spiralbohrer für präzise Metallbearbeitung über Metav beziehen; bei Fragen: info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 47128-FDA Marke: MetavCUT Serie: Standard Line Norm: DIN 338 Daten Durchmesser: 12,8 mm Gesamtlänge: 151 mm Spirallänge: 101 mm Spitzenwinkel: 135° Besonderheiten Material: HSS‑E (Schnellarbeitsstahl mit Kobaltanteil) Farbe: 5% kobaltlegiert Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 5 FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (HSS‑E Kurzbohrer, SKU 47128‑FDA) mit 135° Spitzenwinkel und 5% Kobaltlegierung eignet sich gut für das Bohren in Härteren Stählen und Edelstahl, sofern mit geeigneter Kühlschmierstoffzufuhr gearbeitet wird. Kann ich den Bohrer in einer Handbohrmaschine verwenden? Ja, der Spiralbohrer ist für den Einsatz in Handbohrmaschinen vorgesehen; bei Durchmesser 12,8 mm empfiehlt sich jedoch eine stabile Spannaufnahme und moderater Vorschub, um Rundlauf und Schnittleistung zu gewährleisten. Warum ist der Schaft geschliffen und was bringt das? Die geschliffene Schaftausführung sorgt für hohe Rundlaufgenauigkeit und schärfere Schneiden, wodurch der MetavCUT HSS‑E Spiralbohrer präzisere Bohrlöcher liefert; dies macht ihn besonders geeignet für Sicht‑ und Passungsbohrungen. Wie verhält sich der Kurzbohrer bei Serienprodukten? Der kurze Spiralbohrer (DIN 338) bietet erhöhte Stabilität, ist aber bei sehr großen Serien in gehärtetem Stahl nicht die wirtschaftlichste Wahl; für Dauerbetrieb in hartem Material sind Vollhartmetallwerkzeuge oft wirtschaftlicher. Welche Vorteile bietet die 5% Kobaltlegierung? Die 5% Kobaltlegierung im HSS‑E des MetavCUT Spiralbohrers steigert Hitzebeständigkeit und Verschleißfestigkeit, wodurch längere Standzeiten und sichere Bohrvorgänge in legierten Stählen erreicht werden.
12.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Short Type N Drill, 12.9 mm, 135° Tip, HSS‑E, 5% cobalt‑alloyed, Fully Ground, DIN 338, MetavCUT A short Twist Drill (Type N) designed for precise metal drilling with Drilling Machines and professional workshop use. Short design for increased stability and precision 12.9 mm Diameter for medium‑sized metal bores 135° Tip for harder materials and reduced wander Made of HSS‑E with 5% cobalt for higher wear resistance Fully Ground geometry for accurate, clean holes Precision and Stability that improve every hole A short Twist Drill offers a clear advantage where Rigidity and Exactness matter. The reduced overhang minimizes bending and vibration, so the Drill stays on center even under higher feed forces. For users who rely on repeatable hole quality, this translate into fewer rejects and less rework. The shorter Overall Length also permits safer use in tight set‑ups and stationary Drilling Machines, delivering consistently round bores with improved surface finish. Material and Geometry for demanding metalworking The combination of HSS‑E material and a 5% cobalt‑alloyed composition increases heat resistance and toughness, which is especially beneficial when working with alloyed or stainless steels. A 135° Tip reduces thrust and avoids excessive chipping at the entry, so penetration is smoother in harder materials. For those less familiar: HSS‑E means High Speed Steel with enhanced Cobalt content, providing a balance of hardness and elasticity that reduces the risk of premature wear in heavy duty metal drilling. Built for professional applications and reliable results This Type N short Drill is intended primarily for Metalworking operations where a stable, conventional spiral is required. Shops, toolrooms and maintenance teams will value the improved centering and lower vibration during common tasks such as through‑holes and precise locating bores. Because the Drill is suitable for use in Drilling Machines, it supports both stationary and mobile production needs while maintaining a manufacturing‑oriented performance profile. DIN 338 and Fully Ground: why the standards matter Compliance with DIN 338 denotes that the Drill follows established dimensions and tolerances for short twist drills with cylindrical shanks. The Fully Ground (geschliffen) flute geometry produces very sharp cutting edges and high runout accuracy, resulting in cleaner holes in metal; compared to roll‑formed variants, ground drills usually give better hole quality though they require careful handling and adequate cooling to avoid brittleness. This specification helps users choose the right tool for demanding metal tasks. MetavCUT recommends the Twist Drill Type N for precision metal drilling — for tailored technical advice or to confirm fit for your application contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 47129‑FDA Diameter: 12.9 mm Tip Angle: 135° Type: Type N Execution: Short Colour: 5% cobalt‑alloyed Material: HSS‑E Shank Execution: Fully Ground Spiral Length: 101 mm Overall Length: 151 mm For Machine: Drilling Machine Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill Type N is mainly applied to machining high‑strength materials and larger bore diameters; its short design and robust geometry suit precise metalworking tasks and reduce the risk of breakage under heavier loads. Which three drill types are there? Drill types are commonly categorized as Metal drill, Wood drill and Stone/Concrete drill; the MetavCUT Twist Drill belongs to the Metal drill group and is optimised for ferrous and non‑ferrous metals.
12mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Die kurze Ausführung kombiniert HSS-E Material mit 5% Kobaltlegierung und einem geschliffenen Schaft für erhöhte Stabilität und präzise Bohrbilder. Profitieren Sie von der hohen Standzeit und der Eignung für harte Werkstoffe wie legierten Stahl. Bestellen Sie das Produkt direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT — HSS-E, 12 mm (kurze Ausführung) Der Spiralbohrer ist ein kurzer HSS-E Metallbohrer für präzise Bohrungen in Stahl, Gusseisen und Nichteisenmetallen. Kurze Ausführung für hohe Stabilität HSS-E mit 5% Kobalt für bessere Wärmebeständigkeit Geschliffener Schaft für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe DIN 338 Norm, Zylinderschaft, Typ N Höhere Präzision durch kurze Auskraglänge Die reduzierte Auskraglänge sorgt für weniger Durchbiegung und ein ruhigeres Laufverhalten in der Bohrmaschine. Dadurch entstehen präzisere Bohrbilder und geringere Werkstückverformungen, besonders bei stationärem Einsatz. Anwender profitieren von saubereren Toleranzen und einer verringerten Nachbearbeitung. Materialwahl für anspruchsvolle Metallbearbeitung Die Legierung aus HSS-E mit 5% Kobalt erhöht die Warmfestigkeit und Verschleißresistenz, sodass der Bohrer auch bei erhöhten Schnittbedingungen länger standhält. In Kombination mit dem Spitzenwinkel 135° eignet sich die Ausführung besonders für härtere Stähle und Edelstahl, da der größere Winkel das Anbohren erleichtert und das Anfasen reduziert. Geschliffener Schaft und Normkonformität für industrielle Anwendungen Der geschliffene Zylinderschaft bietet eine bessere Spannpassung und einen sehr guten Rundlauf, was die Standzeit der Spannzange erhöht. Die Einhaltung von DIN 338 garantiert eine standardisierte Form und erleichtert den Austausch in der Fertigung. Für stationäre Säulenbohrmaschinen und präzise Handmaschineneinsätze ist die Ausführung optimal geeignet. Einsatzempfehlung und Bearbeitungshinweise Für saubere Ergebnisse sollten Kühlschmierstoffe verwendet werden und bei 12 mm Durchmesser präzise Anpunkten oder Zentrieren in Erwägung gezogen werden, wenn enge Toleranzen gefordert sind. Der Bohrer ist für Handbohrmaschine und stationäre Maschinen ausgelegt und bietet durch die kurze Länge ein geringeres Bruchrisiko bei kontrollierter Vorschubführung. Empfehlung: Vertrauen Sie auf die HSS-E Kurzbohrerlösung von MetavCUT in der Standard Line und lassen Sie sich bei technischen Fragen direkt von Metav Werkzeuge beraten — per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 47120-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Ausführung: kurz Schaft-Ausführung: geschliffen Material: HSS-E Fakten Durchmesser: 12 mm Gesamtlänge: 151 mm Spirallänge: 101 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten DIN 338 — kurze Spiralbohrer mit Zylinderschaft Typ N — Normalspirale für Metallbearbeitung 5% kobaltlegiert — höhere Warmfestigkeit Für Handbohrmaschine — geeignet für stationäre und handgeführte Maschinen Farbe: 5% kobaltlegiert FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Spiralbohrer Standard Line (SKU 47120-FDA) mit HSS-E und 5% Kobaltlegierung ist für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe ausgelegt; durch den Spitzenwinkel 135° eignet er sich besonders für härtere Werkstoffe. Kann der Bohrer mit einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung des MetavCUT Spiralbohrers ist für Handbohrmaschine geeignet und reduziert durch die geringere Auskraglänge die Neigung zum Verbiegen, was handgeführte Arbeiten stabiler macht. Was bedeutet geschliffener Schaft und warum ist das wichtig? Ein geschliffener Schaft bedeutet, dass die Spannuten durch Schleifen geformt wurden, was sehr scharfe Kanten und hohe Rundlaufgenauigkeit liefert; der Spiralbohrer 47120-FDA bietet dadurch bessere Spannpassung und sauberere Bohrbilder im Vergleich zu rollgewalzten Varianten. Brauche ich einen Vorbohrer für 12 mm? Für den Bereich 2 mm bis 13 mm ist direktes Bohren üblich; bei hoher Präzision empfiehlt sich jedoch vorheriges Zentrieren oder ein kleines Anpunkt, um das Wandern zu vermeiden, insbesondere wenn enge Toleranzen gefordert sind.
13mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
MetavCUT Twist Drill — 13 mm | 135° | Type N | 5% cobalt‑alloyed | short | DIN 338 | HSS‑E The MetavCUT Twist Drill is a short Type N metalworking drill designed for high‑precision holes in steel and other metals, offering a 13 mm diameter, 135° tip angle and HSS‑E construction for increased heat resistance. Twist Drill Type N, 13 mm diameter 135° tip angle for hard materials 5% cobalt‑alloyed HSS‑E for heat resistance Short design for high stability and precision Fully ground shank for excellent runout accuracy Precision and durability for demanding metalwork The short, HSS‑E construction with 5% cobalt optimises heat resistance and edge stability when drilling metals. The 135° tip angle reduces wandering on hard surfaces and improves centring in stainless and alloyed steels. Because the flute geometry is fully ground, the Cutting Edges are especially sharp and produce clean holes with low burr formation. This makes the drill particularly suitable for workshop use on stationary and portable Drilling Machines where consistent hole quality matters. Short length for stable, accurate results A reduced overall length minimises the cantilever effect and lowers the risk of deflection during operation. This short format yields higher rigidity and repeatable hole positions, especially important in precision assemblies. Choose this format when working on tight fixtures or when tool stability is essential; the design helps to avoid chatter and delivers more accurate diameters with less rework. Intended applications and suitable materials Designed as a classic metalworking tool of Type N, this twist drill is aimed at professional machinists, toolrooms and metal fabrication shops. It is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. For general metal drilling tasks where a robust, heat‑resistant bit is required, this cutter provides consistent performance and long tool life under moderated cutting speeds and adequate coolant. Care, usage tips and technical explanation To prolong service life, use appropriate cutting speeds, apply coolant when drilling steels, and avoid excessive feed that could overload the Cutting Edge. The designation Type N refers to the standard spiral geometry for metal; the 135° point reduces the need for pilot holes in harder materials. A fully ground flute means the helix and chisel edge are formed by grinding for superior concentricity; note that ground bits can be more brittle than rolled types and benefit from stable mounting and controlled cooling. Strong recommendation: For precision metal drilling choose the MetavCUT Twist Drill with HSS‑E and 5% cobalt alloy — METAV Werkzeuge offers expert advice to ensure this tool meets your requirements; contact us at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 47130-FDA Diameter: 13 mm Tip Angle: 135° Type: Type N Material: HSS‑E Colour / Alloy: 5% cobalt‑alloyed Execution: short Shank Finish: fully ground Spiral Length: 101 mm Overall Length: 151 mm Model Series: Standard Line For Use In: Drilling Machine Application: Drills for metal Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Twist Drill Type N are primarily used for machining high‑strength materials and larger hole diameters. They are often selected for metalworking because the geometry is relatively easy to sharpen and withstands higher loading; the form is suitable for drilling alloyed and unalloyed steel and larger diameters where robustness is required. Which 3 drill types are there? The three common drill types are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill is part of the metal drill category and is optimised for metalworking operations with appropriate machine settings. Are you unsure whether this Twist Drill meets your technical demands or need additional data for your application? METAV Werkzeuge provides extensive and competent consultation — reach out by e‑mail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 and our specialists will assist you.
2.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
MetavCUT Twist Drill – Short HSS‑E, 2.1 mm, 118° Tip, Type N, 5% Cobalt‑alloyed, Fully Ground Shank, DIN 338 The MetavCUT Twist Drill is a short, high‑performance Twist Drill designed for precision metalworking with drilling machines and hand drills. Short design for higher stability 2.1 mm diameter for precision holes 118° tip for clean entry in soft metals HSS‑E with 5% cobalt for increased wear resistance Fully ground shank for high runout accuracy Exceptional wear resistance for demanding metalwork Made from HSS‑E with 5% cobalt, this short Twist Drill delivers improved Wear Resistance and edge stability when machining steels and other hard metals. The cobalt alloy increases red hardness so the drill maintains cutting performance at higher temperatures, reducing tool changes during batch operations. This translates into longer tool life and fewer interruptions in production. Short length for higher stability and precise holes The reduced overall length and shorter protruding flute of this short design result in less deflection and a more rigid setup. That stability improves concentricity and produces precise Holes even when working with tougher materials or in less rigid chucks. For applications where runout and bending must be minimised, the compact geometry gives a clear advantage in repeatable hole quality. Ground shank and DIN 338 compliance for consistent results A fully ground Shank ensures excellent Runout Accuracy and reliable seating in the chuck, while the DIN 338 classification confirms the product meets standardised dimensions and tolerances for short twist drills. The Type N normal spiral geometry is the classic solution for metal drilling, balancing chip evacuation and cutting action. The 118° tip angle aids entry and centring on slightly curved or soft metal surfaces, producing clean starts. Target users and recommended applications This short Twist Drill is intended for metalworkers, maintenance technicians and workshop environments that require accurate, repeatable holes in alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics. Use with adequate coolant and appropriate spindle speeds to maximise life. For handheld use or on drilling machines the combination of HSS‑E metallurgy and compact form factor is particularly beneficial for precision maintenance tasks and small‑batch production. Strong recommendation: choose the MetavCUT short Twist Drill for demanding metal drilling tasks — for technical advice or to confirm suitability for your application, contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47021-FDA Diameter: 2.1 mm Overall length: 49 mm Spiral length: 24 mm Tip angle: 118° Type: Type N Material: HSS‑E Execution: Short Cobalt content: 5% cobalt-alloyed Shank: Fully ground For drilling machine: Drilling Machine (Hand drill) Model series: Standard Line Norm: DIN 338 Application: Drills for metal Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily used for machining metal; as a short Twist Drill it is especially suited to precise holes in alloyed and unalloyed steel, cast iron, non‑ferrous metals and plastics in both workshop and maintenance environments. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category designed for metalworking applications. Can a metal drill be used in wood and how does the MetavCUT Twist Drill perform? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and surface finish are generally inferior compared with dedicated wood drills; metal drills are easier to resharpen and show less self‑feed, so they can be used for simple wood tasks but with reduced precision. Why is the 118° tip used and what benefit does it bring for the MetavCUT Twist Drill? The 118° tip reduces the aggressiveness of the cutting edge and improves centring on slightly curved or softer surfaces; for the MetavCUT Twist Drill this contributes to cleaner starts and easier penetration in softer metals while maintaining acceptable chip formation.
2.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short, 2.2 mm, 118° point angle, 5% cobalt‑alloyed HSS‑E, DIN 338, fully ground The Twist Drill Type N short is a precision metal‑drilling tool designed for Drilling Machines, offering high stability and reliable performance in demanding metalworking applications. Short design for higher stability and precision 5% cobalt‑alloyed HSS‑E for hard metals Fully ground shank for excellent concentricity 118° point angle improves centring on curved surfaces DIN 338 compliant for short twist drills Robust Material for Longer Tool Life and Harder Materials The HSS‑E composition with 5% Cobalt increases heat resistance and wear performance compared with conventional high‑speed steels, enabling longer service life when machining alloyed and unalloyed steel. Because the substrate material is designed for elevated temperatures, the bit maintains hardness during sustained cutting, which reduces flank wear and the need for frequent replacement. This makes the short Twist Drill particularly suitable when material hardness and repeatable hole quality are priorities. Short Design That Boosts Accuracy and Reduces Deflection A reduced overall length and shorter protruding section result in a lower tendency to bend under load, delivering improved straightness and hole roundness. For precision tasks on a Drilling Machine, the short format keeps vibration and chatter to a minimum, so holes are cleaner and reaming or finishing steps are often reduced. The roll‑or‑grind manufacturing choice ensures consistent geometry; the fully ground variant provides especially sharp cutting lips and high runout accuracy. Geometry and Cutting Behaviour Adapted for Metalwork With a 118° Point Angle and classic Type N spiral, this drill is optimised for typical Metal drilling operations. The point geometry aids in centring on slightly curved or uneven surfaces while reducing the risk of walking. For users unfamiliar with terms: the point angle describes the acute tip shape that controls penetration and chip formation; a larger angle like 118° balances entry ease with a robust cutting edge suited to steels and non‑ferrous alloys. Ground Shank and DIN 338 Compliance for Machine Use The Fully Ground shank guarantees tight concentricity in chucks and collets, translating to reduced runout and longer life of both the tool and the spindle. Conformity with DIN 338 signals adherence to standard dimensions and tolerances for short Twist Drills with cylindrical shank, facilitating straightforward tool selection and replacement in industrial and workshop inventories. For stationary and portable drilling equipment, this predictability simplifies setup and quality control. Intended Applications and Who Benefits Most Engineers, maintenance technicians and metalworking professionals will find the short Twist Drill Type N advantageous for tasks requiring precise, repeatable holes in steels, cast iron, non‑ferrous metals and many plastics. The combination of cobalt alloying and a short flute length makes this drill particularly effective for smaller diameters where stability under higher cutting speeds is essential. Choose this variant where accuracy and tool life under demanding conditions are more important than deep or through‑hand drilling. For technical questions or to confirm suitability for a specific material or machine, METAV Werkzeuge provides expert advice: info@metav-werkzeuge.com — Phone +49 2822 7131930 — WhatsApp +49 170 2837271. We recommend the MetavCUT short Twist Drill Type N for precision metalworking; contact METAV Werkzeuge for personalised guidance and ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930. Designation: Twist Drill Brand: MetavCUT SKU: 47022-FDA Diameter: 2.2 mm Spiral length: 27 mm Overall length: 53 mm Point angle: 118° Type: Type N Execution: short Colour / Alloy: 5% cobalt‑alloyed Shank execution: fully ground Material: HSS‑E Application: Drills for metal Model series: Standard Line Norm: DIN 338 For drilling machine: Drilling Machine Manufacturer contact: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the Twist Drill Type N short from MetavCUT? The MetavCUT Twist Drill Type N short is primarily used for machining metal; its short design and HSS‑E composition make it well suited to drilling alloyed and unalloyed steel, cast iron and non‑ferrous metals on both stationary and portable Drilling Machines. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill Type N short can be used in a Hand Drill or other Drilling Machine, but best results are achieved with stable clamping and appropriate cutting speed and coolant for metalworking. For what are Twist Drills used? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters. This form is relatively simple to resharpen and withstands higher loads, making it suitable for workshop and industrial metal applications. Which three drill types exist? The primary drill categories are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills sharpened at the tip? Tip sharpening reduces the cross‑cut at the drill point, which lowers friction and required feed forces while improving centring in the workpiece, resulting in cleaner holes and less tool stress. Can a metal drill be used for wood? A Metal Drill like the MetavCUT Twist Drill can be used in Wood, but it provides poorer guidance and a less clean finish than dedicated wood drills. Metal drills are easier to resharpen and exhibit lower self‑feeding tendencies.
2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 2 mm, short, 118°, 5% cobalt-alloyed, HSS‑E, fully ground, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS‑E metal drill designed for precise drilling in steels and non‑ferrous metals with high stability and clean hole quality. Short design for higher Stability 2 mm Diameter for precise Holes 118° Tip angle for improved Penetration 5% Cobalt‑alloyed HSS‑E for increased Wear resistance Fully ground Shank for excellent Concentricity Durable alloy construction for reliable metalworking Built from HSS‑E with a 5% cobalt alloy, this short drill offers elevated hardness and heat resistance compared with standard HSS. The cobalt enrichment improves wear resistance during prolonged cutting and helps maintain a sharp cutting edge under higher temperatures. Conforming to DIN 338, the design targets machining of metal where consistent tool life and repeatable results are required. Short geometry for higher stiffness and precise holes The reduced overall length and shorter projecting flute give the tool exceptional rigidity, minimizing deflection in demanding operations. A fully ground flute geometry produces sharp cutting lips and high roundness, resulting in clean holes with reduced burr formation. The combination of short design and ground manufacturing is particularly advantageous for precision drilling tasks on machine tools and drilling machines. Optimised for metal applications and professional use With its Type N normal spiral geometry, the drill is purpose‑engineered for metalworking: suitable for alloyed and unalloyed Steel, Cast Iron, non‑ferrous Metals and Plastics. The compact execution makes it well suited to workshop environments where tight tolerances and repeatable hole quality matter, making it a practical choice for professional technicians and advanced hobbyists alike. Practical handling and recommended machining practice The 118° tip angle balances penetration and centring, and when paired with the Type N geometry it remains effective for metal cutting while easing start‑up into the workpiece. For best results, employ appropriate cutting speeds and cooling/lubrication, especially when drilling harder materials; this reduces heat build‑up and extends tool life. The short, robust shape also lowers the risk of breakage for small diameters, particularly under careful machining conditions. Choose the MetavCUT Standard Line Twist Drill for dependable precision in metalworking — for technical advice or to confirm suitability for your application, contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47020-FDA Diameter: 2 mm Tip angle: 118° Type: Type N Execution: short Colour: 5% cobalt‑alloyed Material: HSS‑E Spiral length: 24 mm Overall length: 49 mm Shank execution: fully ground Norm: DIN 338 Model series: Standard Line For drilling machine: Drilling Machine / Hand Drilling Machine Application: Drills for metal Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suited to? The MetavCUT Twist Drill Type N is primarily used for machining metal; it is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. The tool’s short HSS‑E construction with 5% cobalt offers improved heat and wear resistance, making it appropriate for demanding metal drilling tasks. Which three drill types are commonly distinguished? In workshop practice the three main drill categories are: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill falls into the metal drill group and is optimised for metalworking applications.
3.5mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill – Short Type N, 3.5 mm, 135°, 5% Cobalt-Alloyed, HSS‑E, Fully Ground, DIN 338 (MetavCUT) The Twist Drill is a short Type N drill designed for precise metalworking in hand drills and drilling machines. Short design for high stability and precision 3.5 mm diameter for fine, precise holes 135° tip for harder materials like stainless steel 5% cobalt-alloyed HSS‑E for increased wear resistance Fully ground flutes for clean, accurate holes Engineered for precise metal drilling with reduced flex This short Twist Drill is optimised for metal applications where dimensional accuracy matters. With a 3.5 mm diameter and a 135° point angle, it reduces walking on hard surfaces and shortens the pilot time when entering stainless steel or other tough alloys. The geometry follows DIN 338, which classifies short HSS drills with a cylindrical shank. As a result, users benefit from repeatable hole position and improved concentricity when working on both stationary and portable machines. Short length and fully ground construction for stability The reduced overall length and shorter overhang translate into less deflection and improved control during drilling. The 39 mm spiral length and 70 mm overall length keep the cutting forces close to the chuck, while the Fully Ground flute geometry ensures a sharp cutting edge and excellent roundness of the hole. This combination is particularly helpful for precision tasks and reduces the risk of chattering when drilling through thicker or harder sections of metal. Material selection and wear resistance for demanding tasks Manufactured from HSS‑E with 5% cobalt-alloyed composition, this short spiral drill offers enhanced red hardness and wear resistance compared with standard HSS. The cobalt addition supports higher cutting temperatures and extends tool life in continuous or interrupted cutting conditions. Being a Type N (normal spiral) geometry, it is primarily aimed at metalworking; the flute design facilitates reliable chip evacuation for cast iron, alloyed and unalloyed steel, and many non‑ferrous metals. Practical recommendations for safe, accurate use For best results clamp the workpiece securely, select appropriate spindle speeds and use coolant for stainless and other heat‑resistant alloys. The short design suits precise workshop tasks, maintenance and production runs where hole quality and repeatability are priorities. A short spiral drill is less suitable for deep, through‑holes beyond its flute capacity; for deeper holes consider a longer, purpose‑designed drill. MetavCUT's short design is ideal for users seeking controlled, clean holes with reduced breakage risk when used with adequate support and cooling. We recommend MetavCUT's short Twist Drill for demanding metalworking — for tailored technical advice contact METAV Werkzeuge: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271. Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 47035-FDA Type: Type N Diameter: 3.5 mm Point angle: 135° Spiral length: 39 mm Overall length: 70 mm Execution: Short Shaft finish: Fully Ground Material: HSS‑E Cobalt content / Colour: 5% cobalt-alloyed For machine: Drilling Machine / Hand Drill Model series: Standard Line Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT (Type N) suitable for? The MetavCUT Twist Drill (Type N) is primarily intended for metalworking; its HSS‑E composition with 5% cobalt‑alloying makes it suitable for alloyed and unalloyed steel, cast iron and many non‑ferrous metals. For stainless steel or other heat‑resistant materials use cutting fluid and moderate speed to preserve tool life. Which three drill types exist? Common categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for metal applications rather than woodworking or masonry.
3.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill short HSS‑E, 3.6 mm, 135°, Type N, 5% cobalt-alloyed, fully ground, DIN 338 The Twist Drill short (Type N) is a HSS‑E metal drill designed for precise, stable drilling in hard materials using a Drilling Machine. Short design for high stability 135° point angle for hard metals 5% cobalt-alloyed HSS-E material Fully ground shank for precision Complies with DIN 338 standard Greater Precision through a Short, Rigid Design A shorter cutting length reduces overhang and bending, delivering higher stability and more accurate hole positioning. The short configuration of this Twist Drill is especially effective when tight tolerances are required, since the reduced length minimizes chatter and deflection. For operators aiming to improve repeatability on metal components, this design leads directly to fewer rejects and less rework. Heat-resistant Material and Sharp, Clean Cutting Built from HSS‑E with 5% cobalt-alloyed composition, this Twist Drill offers enhanced hot hardness and wear resistance during interrupted cuts or higher cutting speeds. The fully ground geometry creates very sharp cutting edges and excellent runout accuracy, producing cleaner holes in ferrous and non-ferrous metals. Users should be aware that ground variants can be less ductile than rolled types and benefit from appropriate coolant to extend tool life. Optimised for Metalworking and Hard Materials With a 135° point angle and classic Type N spiral, the tool penetrates tough materials more effectively and reduces walking on the surface. This geometry is tailored to workpieces such as alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain engineering plastics. The 3.6 mm diameter and corresponding flute length support applications where compact, precise holes are required on stationary or mobile drilling equipment. Who benefits and how to integrate it into the workflow This Twist Drill from MetavCUT is aimed at machinists, toolroom staff and maintenance professionals who need a reliable, precise metal drill for production and repair tasks. Use with steady clamping and recommended cooling to avoid premature wear. Compliance with DIN 338 ensures standardized dimensions and interchangeability for workshop setups that require consistent tool geometry. Choose MetavCUT's Twist Drill short Type N for demanding metal drilling tasks — for detailed technical advice or help selecting the right drill please contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel +49 2822 7131930 • WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 47036-FDA Type: Type N Diameter: 3.6 mm Point angle: 135° Overall length: 70 mm Spiral length: 39 mm Execution: short Shaft finish: fully ground Material: HSS-E Colour: 5% cobalt-alloyed For: Drilling Machine Application: Drills for metal Norm: DIN 338 Model series: Standard Line Bezeichnung (English): Twist Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill short Type N best used for? The MetavCUT Twist Drill short Type N is best used for precision drilling in metal, particularly alloyed and unalloyed steel, cast iron and non‑ferrous metals where a short, rigid drill reduces deflection and improves hole quality. Is coolant recommended when using the Twist Drill short from MetavCUT? Yes, using coolant is recommended with the MetavCUT Twist Drill short to lower cutting temperatures, extend tool life and achieve cleaner holes, especially when drilling harder materials at higher speeds. What are Twist Drills used for? They are primarily applied to the machining of high‑strength materials and larger bore diameters; the Twist Drill design is relatively easy to resharpen and withstands higher loads. Which 3 drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip, significantly lowering friction and required feed forces while improving the drill’s centring in the workpiece. Can metal drills be used for wood drilling? Metal drills can be used in wood, but they typically provide poorer guidance and a less clean finish compared with wood drills; they are easier to resharpen and have less self‑feed tendency. For which drilling depths is the Twist Drill most used? A through-hole in solid material is commonly produced with a Twist Drill; this tool is most frequently used for diameters up to 20 mm and drilling depths up to 100 mm. What is better, HSS or HSSE? The common belief that HSSE is always superior to HSS is incorrect; selection should consider actual working conditions to determine whether the higher cost of HSSE is justified.
3.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, Diameter 3.7 mm, 135° Point Angle, Short Execution, 5% Cobalt-Alloyed, HSS‑E, DIN 338, Fully Ground Shaft (Standard Line) by MetavCUT The Twist Drill is a short Type N metal drill designed for precise drilling in hard materials with a 135° point angle and a 3.7 mm diameter, ideal for use in a Drilling Machine. Short design for greater stability and precision HSS‑E with 5% cobalt for higher heat resistance Fully ground shaft for excellent runout accuracy Conforms to DIN 338 for short twist drills Optimised for metal drilling and hard materials Precision and stability for demanding metalwork The short Twist Drill design reduces overhang and vibration, which directly improves drilling accuracy and tool life. Because the protruding length is smaller, the drill resists bending and chatter, making it especially suitable for precise holes in steel and other hard materials. This short execution is therefore recommended when high concentricity and repeatable results are required in metalworking tasks. Material technology that extends performance Manufactured from HSS‑E and alloyed with 5% cobalt, the drill offers increased hot hardness and wear resistance compared with conventional high-speed steels. The 135° point angle is selected to ease penetration into tough materials and to lower the tendency for the tip to wander. For users unfamiliar with these terms: HSS‑E is a high-speed steel with cobalt additive that maintains hardness at elevated temperatures, while a larger point angle reduces cutting stress on stainless and alloy steels. Ground geometry for cleaner holes and reliable guidance This MetavCUT twist drill is fully ground, meaning the flute geometry and cutting edges are produced by CNC grinding rather than roll forming. The result is sharper cutting lips, improved roundness of holes and a better surface finish in the workpiece. For workshop operators this translates into fewer rework steps and less time spent deburring. The Type N spiral (normal helix) provides a balanced chip evacuation for many metal applications. Conformity and recommended uses Being manufactured to DIN 338 as a short twist drill, this tool is optimised for drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The short length and robust material composition make it well suited for stationary and portable Drilling Machines when coolant is applied for deep cuts or harder alloys. For diameters under 6 mm the rolled HSS variant can reduce breakage risk in some settings, but the ground HSS‑E offers superior hole quality for precision work. Strong recommendation: Choose the MetavCUT Twist Drill for precise metal drilling tasks where stability and hole quality matter most — METAV Werkzeuge offers expert advice and technical support to ensure the right tool choice for your application. For assistance contact METAV Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930 / WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 47037-FDA Diameter: 3.7 mm Point Angle: 135° Type: Type N Material: HSS‑E Execution: Short Colour/Alloy: 5% cobalt-alloyed Shaft Execution: Fully ground Spiral Length: 39 mm Overall Length: 70 mm Intended For: Drilling Machine Application: Drills for metal Model Series: Standard Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT best used for? The MetavCUT Twist Drill is primarily used for metalworking: it is designed to drill high-strength materials and larger diameters where stability and precise guidance are required; its short design and material composition allow it to withstand higher stresses during drilling. Can the MetavCUT Twist Drill be used in a handheld drill? The Twist Drill is optimised for Drilling Machines and stationary setups for best results, but it can be used in handheld machines for lighter tasks; however, stable clamping and appropriate feed control are recommended to avoid breakage and to maintain hole quality. What are Twist Drills used for? Twist Drills are mainly applied when machining high-strength materials and larger drill diameters. Their shape allows relatively easy regrinding and they withstand higher loads, making them suitable for demanding metal drilling operations. Which three drill types exist? The three common drill types are: Metal Drill, Wood Drill, and Stone/Concrete Drill. Why are Twist Drills sharpened (pointed)? Pointing reduces the cross-cut at the tip of the Twist Drill, which significantly lowers friction and thus the feed forces required; at the same time the pointed tip centres the drill more accurately in the workpiece. Can you use a metal drill in wood? A metal drill can be used in wood, but guidance may be inferior and the hole finish less clean; metal drills are easier to re-sharpen and have less self-feed, so they behave differently compared with wood-specific bits. For which hole depths is the Twist Drill most commonly used? Twist Drills are the standard tool for through-holes; they are most commonly used for diameters up to 20 mm and drilling depths up to 100 mm, making them the go-to choice for many machining tasks.
3.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short, 3.8 mm, 135° point, 5% cobalt-alloyed, HSS‑E, fully ground shank, DIN 338 by MetavCUT The Twist Drill Type N short is a precision metalworking drill bit designed for stable, high‑accuracy drilling in hard materials using a Drilling Machine. Short design for improved stability 3.8 mm diameter for precise holes 135° point angle for hard materials 5% cobalt‑alloyed HSS‑E for heat resistance Fully ground shank for high concentricity Engineered for stable, accurate metal drilling The short configuration of this Twist Drill delivers a reduced overhang that significantly improves stability and reduces deflection during machining. With a 3.8 mm diameter and a 75 mm overall length including a 43 mm spiral length, the geometry supports precise hole positioning and consistent concentricity. The Type N spiral profile is optimised for metalworking applications, allowing controlled chip evacuation and steady feed rates when used in a suitable Drilling Machine. Material and wear resistance for demanding tasks Manufactured from HSS‑E with a 5% cobalt alloy, this short drill bit offers enhanced hot‑hardness and improved wear resistance compared with plain HSS grades. The 135° point angle reduces thrust during entry into hard materials and is particularly effective on stainless steel and other tough alloys. The fully ground flute geometry ensures sharp cutting edges for clean hole walls, while the cobalt content supports longer tool life under elevated temperatures. Precise manufacturing and conformity to DIN 338 Produced to the DIN 338 specification, the Short Twist Drill features consistent dimensions and dependable interchangeability for industrial use. The fully ground shank and flute finish result in excellent roundness and high runout accuracy, which translates into fewer rejects and faster setup for series production. For tasks requiring repeatability and tight tolerances, this design reduces the need for secondary rework. Practical applications and user guidance This drill is intended primarily for Drills for metal operations including alloyed and unalloyed steels, cast iron, non‑ferrous metals and select plastics. Typical uses include maintenance, fabrication and precision engineering where short, stiff drilling tools are preferred. For best results, use appropriate cutting fluid and moderate spindle speeds to exploit the cobalt alloy’s thermal advantages and to minimise risk of premature wear or breakage. Compatibility and handling recommendations The fully ground cylindrical shank fits standard chucks of portable and stationary drilling equipment and is especially suited to station‑based Drilling Machines. Because ground HSS drills can be more brittle than rolled variants, avoid excessive vibration and ensure secure clamping; cooling or lubrication is recommended for deeper or continuous drilling cycles. The short length makes bit changes quick and reduces operator fatigue in repetitive tasks. Strongly recommended: choose MetavCUT quality for stable, precision metal drilling and contact METAV Werkzeuge for personalised advice — email info@metav-werkzeuge.com, phone +49 2822 7131930, WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 47038-FDA Diameter: 3.8 mm Overall length: 75 mm Spiral length: 43 mm Point angle: 135° Type: Type N Execution: short Material: HSS-E Alloy: 5% cobalt-alloyed Shank: fully ground Intended machine: Drilling Machine Application: Drills for metal Standard: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill MetavCUT Type N short? The MetavCUT Twist Drill Type N short is used predominantly for metalworking tasks; it is designed to drill through high‑strength materials and larger diameters where a short, rigid tool provides better precision and reduced bending. Which three drill types are commonly distinguished and where does the Twist Drill fit? Generally, drill types are classified as metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N short belongs to the metal drill category and is optimised for machining metals rather than wood or masonry. Why are twist drills sometimes point‑sharpened? Point sharpening reduces the cross‑cut at the tip, lowering friction and thus reducing the required feed forces; a sharper, correctly angled tip also helps centre the drill more reliably in the workpiece. Can a metal twist drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish may be inferior to a dedicated wood bit; nevertheless, metal drills are easier to regrind and generally exhibit less self‑feed in softer materials.
3.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Kompakte, kurz ausgeführte Bohrungslösung mit HSS-E-Werkstoff und 135° Spitzenwinkel für stabile, präzise Metallbearbeitung; ideal für präzisionsorientierte Werkstätten. Bestellen direkt über Metav Werkzeuge oder Beratung per eMail info@metav-werkzeuge.com anfragen. Spiralbohrer 3,9 mm HSS-E (kurz) – MetavCUT Standard Line Der Spiralbohrer ist ein kurz ausgeführter, geschliffener HSS-E Bohrer für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen. Spiralbohrer 3,9 mm HSS-E, geschliffen Kurze Ausführung für hohe Stabilität Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und Maschinen Norm DIN 338, Typ N, Standard Line Kompakte Bauweise für zuverlässige Präzision Die kurze Ausführung reduziert die Auskraglänge und erhöht damit die Stabilität bei der Bohrung. Durch die geringere Neigung zum Verbiegen werden Laufgenauigkeit und Bohrbild verbessert, was vor allem bei engen Toleranzen und kleinen Durchmessern relevant ist. Diese Konstruktion ermöglicht kontrollierte Vorschubwerte und minimiert Vibrationen, sodass saubere, maßhaltige Löcher in Metall erzielt werden. Hochwertiges Material sorgt für Schnittfestigkeit Der Einsatz von HSS-E mit 5% kobaltlegiertem Zusatz kombiniert Zähigkeit mit Warmfestigkeit, wodurch die Standzeit beim Bohren in legiertem Stahl steigt. Die geschliffene Schaft- und Spanutengeometrie sorgt für scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was die Bohrqualität verbessert. Bei Durchmessern unter 6 mm verringert die niedrigtemperierte Produktion das Bruchrisiko spürbar. Passende Einsatzfelder und Maschinenempfehlung Als Typ N mit Norm DIN 338 eignet sich das Werkzeug für allgemeine Metallbearbeitung: legierter und unlegierter Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe. Im Cluster der Standard-Durchmesser bietet dieser Bohrer die Balance aus Handhabung und Leistung und kann sowohl in Handbohrmaschine als auch auf Säulenbohrmaschinen eingesetzt werden. Für höchste Genauigkeit empfiehlt sich Anpunkten mit Zentrierbohrer. Einfache Handhabung und sichere Arbeitstechnik Die Kombination aus geschliffenem Schaft und kompakter Länge erleichtert das Handling und reduziert das Risiko von Bohrerbruch bei stationärem Einsatz. Kühlung bei zähen Werkstoffen und moderater Vorschub bei Edelstahl verlängern die Lebensdauer, während passende Drehzahlen und Anbohrhilfe saubere Einläufe sichern. So lassen sich reproduzierbare Ergebnisse mit geringem Nacharbeitaufwand erzielen. Für präzise Metallbohrungen die MetavCUT Standard Line wählen und direkt über Metav beziehen – bei Fragen eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 nutzen Produktmerkmale Artikelnummer: 47039-FDA Marke: MetavCUT Serie: Standard Line Ausführung: kurz Material: HSS-E Fakten Durchmesser: 3,9 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Schaftausführung: geschliffen Norm: DIN 338 Typ: Typ N Zulegierung: 5% kobaltlegiert Geeignet für: Handbohrmaschine FAQ Welche Werkstoffe kann der Bohrer bearbeiten? Der MetavCUT Standard Line Spiralbohrer 3,9 mm (SKU 47039-FDA) eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle sowie Kunststoffe; bei zähen Werkstoffen Kühlung empfehlen. Ist der Bohrer für Handgebrauch geeignet? Ja, dieser kurz ausgeführte HSS-E Bohrer wurde für den Einsatz an Handbohrmaschine und stationären Maschinen konzipiert und bietet durch die kurze Auskraglänge erhöhte Stabilität. Warum ist der Spitzenwinkel 135° vorteilhaft? Ein Spitzenwinkel von 135° erleichtert das Anbohren harter Werkstoffe und reduziert Wanderneigung, wodurch beim MetavCUT Spiralbohrer die Anbohrzeit und das Ausreißen minimiert werden. Wie verringert die geschliffene Ausführung Bruchrisiken? Die geschliffene Geometrie liefert schärfere Kanten und besseren Rundlauf; in Verbindung mit dem HSS-E Werkstoff und der niedrigen Temperaturfertigung sinkt speziell bei kleinen Durchmessern das Bruchrisiko.
4.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Profitieren Sie von der Kombination aus kurzer Ausführung für erhöhte Stabilität, HSS‑E mit 5% Kobaltlegierung für mehr Verschleißfestigkeit und dem 135° Spitzenwinkel für bessere Anbohrleistung in harten Werkstoffen; bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung bei Bedarf. Spiralbohrer 4,1 mm (HSS‑E) – MetavCUT Standard Line Der Spiralbohrer in kurzer Ausführung ist für präzise Metallbohrungen konzipiert und eignet sich besonders für legierten und unlegierten Stahl sowie für Gusseisen und Nichteisenmetalle. Kurze Ausführung für höhere Stabilität HSS‑E mit 5% Kobaltlegierung für längere Lebensdauer Geschliffene Schaftausführung für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für sicheres Anbohren harter Werkstoffe Geeignet für Handbohrmaschine und stationäre Bohrarbeiten Präzise Leistung für den Alltag in Werkstatt und Montage Die kurze Ausführung dieses Bohrers reduziert die Auskraglänge und minimiert damit Vibrationen sowie Verbiegen, was zu saubereren Bohrlöchern und höherer Maßhaltigkeit führt. Durch die Kombination aus geschliffener Geometrie und optimiertem Schneidwinkel entsteht eine sehr gute Rundlaufgenauigkeit, die sich in präzisen Ergebnissen bei Serien- und Einzelfertigung niederschlägt. Für Anwender bedeutet das weniger Nacharbeit und eine verlässlichere Prozessqualität. Materialkompetenz und Fertigungsverfahren für harten Einsatz Gefertigt aus HSS‑E (Schnellarbeitsstahl mit Kobalt) und mit 5% Kobaltlegierung, bietet dieser Bohrer verbesserte Warmfestigkeit und Zähigkeit gegenüber herkömmlichem HSS. Die geschliffene Herstellung sorgt für scharfe Schneiden und saubere Spanführung, was besonders beim Bohren in harten Werkstoffen wie Edelstahl oder legiertem Stahl von Vorteil ist. Die Einordnung nach DIN 338 bestätigt die Ausführung als kurzer Spiralbohrer mit Zylinderschaft. Praxiseinsatz, Maschinenkompatibilität und Verarbeitungshinweise Der Durchmesser von 4,1 mm liegt im Standard‑Bereich, somit eignet sich der Bohrer sowohl für Handgeführte Akkubohrschrauber als auch für stationäre Säulenbohrmaschinen. Im Vergleich zu langen Bohrern bietet die kurze Bauform deutlich bessere Stabilität; das verringert Bruchrisiken besonders bei kleinen Durchmessern. Für saubere Ergebnisse bei Metall empfiehlt sich der Einsatz von Kühlschmierstoff und moderatem Vorschub, Schraubfutter fest anziehen und Rundlauf prüfen. Handling, Vorsichtsmaßnahmen und Zielgruppe Für Anwender im Maschinenbau, in der Instandhaltung und im Handwerk ist dieser Bohrer eine wirtschaftliche Wahl, wenn es um zuverlässige Metallbearbeitung geht. Bei Bohrungen über das Fünffache des Durchmessers oder bei extrem zähen Werkstoffen sind abgestufte Vorgehensweisen zu wählen. Kleine Durchmesser wie 4,1 mm profitieren von hoher Drehzahl und kontrolliertem Vorschub; das reduziert Spanaufbau und verlängert die Lebensdauer des Werkzeugs. Setzen Sie auf die MetavCUT Standard Line und fordern Sie eine persönliche Beratung per info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 an, um die passende Ausführung für Ihre Anwendung zu wählen. Produktmerkmale Artikelnummer: 47041-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Daten Durchmesser: 4,1 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑E — Schnellarbeitsstahl mit Kobalt Schaftausführung: geschliffen — CNC‑Schliff für hohe Rundlaufgenauigkeit Farbe: 5% kobaltlegiert Ausführung: kurz — reduzierte Auskraglänge für Stabilität Typ: Typ N — Normalspirale, klassischer Metallbohrer Für Bohrmaschine: Handbohrmaschine FAQ Für welche Werkstoffe eignet sich der Bohrer besonders gut? Der Spiralbohrer von MetavCUT (Standard Line, SKU 47041-FDA) eignet sich besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle; die Kombination aus HSS‑E und 5% Kobaltlegierung erhöht die Standzeit beim Bohren in harten Materialien. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, der Spiralbohrer 4,1 mm (MetavCUT Standard Line, 47041-FDA) ist für den Einsatz in Handbohrmaschinen geeignet; die kurze Ausführung bietet dabei mehr Stabilität und reduziert die Gefahr von Verbiegen. Ist die Schaftausführung geschliffen oder gewalzt? Die Schaftausführung dieses Bohrers ist geschliffen, was eine hohe Rundlaufgenauigkeit und scharfe Schneidkanten gewährleistet; das ist besonders bei präzisen Metallbohrungen von Vorteil. Welche Vorteile bietet der 135° Spitzenwinkel in der Praxis? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers (47041-FDA) verringert das Ausbrechen beim Anbohren harter Werkstoffe und verbessert die Zentrierwirkung, sodass kontrolliertes Anbohren ohne übermäßiges Wandern möglich ist. Wie wird der Bohrer geliefert und wie viele Stück sind in einer Einheit? Der Spiralbohrer wird in einer Verpackungseinheit von 10 Stück geliefert; die SKU lautet 47041-FDA und gehört zur MetavCUT Standard Line.
4.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Die Kombination aus hoher Stabilität, langlebigem HSS-E und präzisem 135° Spitzenwinkel sorgt für saubere Metallbohrungen bei geringem Bruchrisiko; bei Fragen zur Anwendung hilft die Beratung von Metav gern weiter. Bestellen Sie den Spiralbohrer von MetavCUT direkt über Metav oder rufen Sie die Technik an. Spiralbohrer kurz HSS-E 4,2 mm von MetavCUT Spiralbohrer von MetavCUT in Kurz-Ausführung für präzise Metallbohrungen mit hoher Standzeit und guter Rundlaufgenauigkeit Spiralbohrer »47042-FDA« von MetavCUT HSS-E 5% Kobaltlegierung für harte Werkstoffe geschliffen für hohe Rundlaufgenauigkeit 135° Spitzenwinkel für Edelstahl und Stahl Kurze Ausführung für mehr Stabilität beim Bohren Höhere Präzision durch geschliffene Werkzeuggeometrie Die geschliffene Fertigung sorgt für sehr scharfe Schneiden und eine ausgezeichnete Rundlaufgenauigkeit, was sich in sauberen Bohrbildern und gleichmäßigen Spankonturen niederschlägt. Die Ausführung nach DIN 338 klassifiziert den Bohrer als kurzen Spiralbohrer mit Zylinderschaft und macht die Qualität nachvollziehbar. Anwender profitieren von vermindertem Wandern beim Anbohren und besserer Zentrierung im Werkstück. Robustheit und Einsatzbereiche für den Werkstattalltag Diese Kurz-Ausführung wurde für den Einsatz an der Handbohrmaschine und stationären Maschinen entwickelt und eignet sich besonders für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe. Die reduzierte Auskraglänge erhöht die Stabilität und senkt das Risiko von Verbiegen oder Bruch, wodurch die Produktivität in Werkstatt und Montage steigt. Optimaler Spitzenschliff und Typ N Geometrie für Metall Der 135° Spitzenwinkel reduziert das Anheben beim Anbohren harter Werkstoffe und verbessert die Anlaufeigenschaften in dünnen Blechen und Profilen. Die normale Spirale Typ N ist die klassische Metallgeometrie und bietet ausgewogene Spanabfuhr bei typischen Schnittbedingungen. Für Edelstahl empfiehlt sich die Verwendung von Kühlschmierstoff und moderater Vorschubgeschwindigkeit. Praxisnahe Hinweise für sicheren Einsatz Für saubere Passungen vorher mit einem Zentrierbohrer anpunktieren und bei Bohrungen tiefer als das Fünffache des Durchmessers Zwischenbohrungen planen. Die Kurz-Ausführung verringert das Bruchrisiko bei Bohrungen unter 6 mm, die Rolle der Kühlung bleibt bei harten Werkstoffen entscheidend. Verpackungseinheit Zehn Stück macht die Bestellung für kleine Werkstätten wirtschaftlich praktikabel. Empfehlung: Der Spiralbohrer von MetavCUT in der Standard Line verbindet Stabilität, HSS-E und präzise Geometrie — bei Fragen zur Auswahl kontaktieren Sie Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 47042-FDA Marke: MetavCUT Serie: Standard Line Norm: DIN 338 Ausführung: kurz Fakten Durchmesser: 4,2 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-E (Schnellarbeitsstahl mit Kobaltanteil) Kobaltlegierung: 5% kobaltlegiert Schaftausführung: geschliffen (Vollschliff) Typ: Typ N (Normalspirale für Metall) Für Bohrmaschine: Handbohrmaschine FAQ Ist der Spiralbohrer von MetavCUT für Edelstahl geeignet? Der Spiralbohrer von MetavCUT aus HSS-E mit 135° Spitzenwinkel ist für Edelstahl geeignet; bei rostfreien Stählen empfiehlt sich Kühlung und moderater Vorschub, um Standzeit und Bohrbild zu optimieren. Welche Vorteile bietet die geschliffene Ausführung gegenüber gewalzten Bohrern? Die geschliffene Ausführung des Spiralbohrer liefert schärfere Schneiden und bessere Rundlaufgenauigkeit, was zu saubereren Bohrlöchern führt; das Modell 47042-FDA ist daher besonders für präzise Metallbearbeitung empfohlen. Für welche Maschinen ist dieser Bohrer vorgesehen? Der Spiralbohrer 47042-FDA wurde für Handbohrmaschine und stationäre Maschinen entwickelt und eignet sich im Standard-Bereich für Werkstatt, Montage und DIY-Anwendungen. Wie viele Bohrer sind pro Verpackungseinheit enthalten? Die Verpackungseinheit umfasst Zehn Stück, was die Versorgung kleiner Werkstätten vereinfacht und Nachbestellungen reduziert. Worin liegt der Nutzen der 5% Kobaltlegierung beim HSS-E Bohrer? Der Kobaltanteil erhöht die Warmhärte und Verschleißfestigkeit des HSS-E Materials, so dass der Bohrer auch bei höheren Schnitttemperaturen und in gehärteteren Werkstoffen länger zuverlässig arbeitet.
4.3mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Type N) — MetavCUT; 4.3 mm; Short; HSS‑E; 135° point angle; 5% cobalt‑alloyed; Fully Ground; DIN 338 The Twist Drill (Type N) from MetavCUT is a short HSS‑E metal drill designed for precise, stable drilling in harder materials on drilling machines. Short design for higher rigidity and precision 4.3 mm diameter for precise metal holes 135° point angle for harder materials HSS‑E with 5% cobalt for enhanced durability Fully ground shank and DIN 338 conformity Precise holes through higher rigidity and stability The Twist Drill with a short design reduces the out‑of‑chuck overhang, resulting in noticeably less vibration and improved concentricity when machining metal. With a nominal 4.3 mm diameter and compact 47 mm spiral length, this drill delivers higher stability compared with longer variants, which directly benefits hole quality and repeatability. For workshop environments where accuracy matters, the reduced tendency to bend means fewer rejects and a steadier process, especially when using a dedicated Drilling Machine. Material choice and tip geometry tailored for hard materials Constructed from HSS‑E with 5% cobalt, the tool offers improved red hardness and wear resistance for demanding cuts. The 135° point angle is specifically chosen to ease entry and reduce chipping when working with harder steels and alloyed materials, while the Type N normal spiral remains the proven choice for general metalworking. Conformity to DIN 338 signals compatibility with industry expectations for short, cylindrical shank drills, and helps you match the right tool to the machining task. Fully ground geometry for accurate, clean drilling A fully ground flute and point geometry produce sharp cutting edges and excellent runout behaviour, resulting in clean bores and precise diameters. Grinding (CNC‑grind) creates the typical HSS‑G characteristics: high edge sharpness and excellent concentricity. Note that ground drills can be more brittle than rolled alternatives and benefit from correct clamping, moderate cutting parameters and adequate cooling to avoid premature fracture. The short variant reduces these risks further by minimising leverage on the cutting edge. Application focus, user guidance and workshop compatibility Designed primarily as a Drill for Metal, this short HSS‑E twist drill is ideal for workshop machinists, toolrooms and maintenance departments that require repeatable, accurate holes in alloyed and unalloyed steels, cast iron, non‑ferrous metals and plastics. The tool is best used in stationary or portable drilling machines with secure chucking and appropriate coolant. For customers unsure about cutting speeds, feeds or suitability for a specific material, METAV Werkzeuge offers competent support and technical advice to match the tool to the job. Strongly recommend MetavCUT Twist Drill Type N for precision metalworking — for expert guidance and ordering assistance contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47043-FDA Diameter: 4.3 mm Spiral length: 47 mm Overall length: 80 mm Point angle: 135° Type: Type N Version: short Shaft execution: fully ground Material: HSS‑E Colour: 5% cobalt-alloyed For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Norm: DIN 338 Execution: kurz Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill Type N is mainly applied when machining high‑strength materials and larger drilling diameters; its shape allows relatively easy re‑sharpening and it withstands higher loads, making it suitable for robust metalworking tasks. Which three drill types are there? Typical categories are metal drills, wood drills and stone/concrete drills, and the MetavCUT Twist Drill is positioned within the metal drill group for machining metals. Why are Twist Drills point‑sharpened? The point sharpening reduces the cross‑cut at the tip, which lowers friction and therefore requires less feed force; with the MetavCUT Twist Drill this also improves centring of the tip in the workpiece. Can you use a metal drill for wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance is poorer and hole quality is usually inferior; the advantage is easier re‑grinding and less tendency for self‑feeding, but expect a rougher finish. At what drilling depths is the Twist Drill most commonly used? A through‑hole is typically made with a Twist Drill; for diameters up to about 20 mm and depths up to approximately 100 mm the Twist Drill is the most frequently used tool, and the MetavCUT short variant is optimised for stability at such depths. What is better, HSS or HSSE? The common belief that HSSE steels are always superior to HSS is not universally correct; when choosing a MetavCUT Twist Drill, evaluate whether the specific working conditions justify a higher‑cost HSSE tool, since HSS‑E may already provide the required performance.
4.4mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Typ N) — short HSS‑E Metal Drill, 4.4 mm, 135° tip, 5% cobalt‑alloyed The Twist Drill (Typ N) is a short HSS‑E metal drill designed for precise machining with a 135° point angle and a fully ground shank for secure chucking. Short design for higher stability 135° tip for hard and alloyed steels 5% cobalt‑alloyed HSS‑E for increased red‑hardness Fully ground flutes for accurate, clean holes Conforms to DIN 338 for short twist drills Precision and Stability for Demanding Metalwork A short HSS‑E drill of this design delivers notably greater stability during drilling because the reduced overhang minimises bending and vibration. The combination of a 4.4 mm diameter with a 47 mm flute length and overall length of 80 mm results in a compact tool that keeps the cutting geometry close to the chuck, improving concentricity and repeatable hole quality when used in a compatible Drilling Machine or stationary set‑up. This construction is ideal for work that requires tight tolerances and reliable hole positioning. Optimised for Hard Materials and Clean Holes Thanks to the 135° point angle and the 5% cobalt‑alloyed HSS‑E substrate, the drill penetrates harder and alloyed steels more effectively than standard HSS tools. The fully ground flute geometry produces very sharp cutting edges and high roundness, which leads to cleaner holes with less burring. Users should note that the grinded version offers excellent precision but can be more brittle than roll‑formed variants; appropriate coolant and stable clamping are recommended to extend tool life during high‑performance drilling. Designed to Meet DIN 338 Requirements and Workshop Needs Manufactured to the DIN 338 standard for short twist drills with a cylindrical shank, this tool follows established size and tolerance criteria that support interchangeability and predictable performance. The Type N spiral geometry represents the classic metal‑drill profile, suitable for materials such as alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. The short format is particularly suited to precision workshop tasks where reduced run‑out and minimal deflection are priorities. Who benefits from this short HSS‑E drill? Engineers, toolroom technicians and metalworkers who require accurate, repeatable holes in tougher materials will find this drill especially useful. Its compact design and fully ground shank make it a strong choice for setups where rigidity matters—such as jig bores, component finishing and jobs on vertical or radial drilling machines. For less rigid hand‑held applications, ensure a secure chuck grip and moderate feeds to avoid undue stress on the cutting edge. Empfehlung von MetavCUT: For precise metal drilling tasks choose the MetavCUT short Twist Drill in HSS‑E; for further advice on suitability or complementary tooling contact METAV Werkzeuge — we provide expert consultation and technical support via eMail, phone and WhatsApp Email: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill (Spiralbohrer), short, Type N, 4.4 mm, 135° Marke/Hersteller: MetavCUT SKU: 47044-FDA Material: HSS-E (5% cobalt-alloyed) Durchmesser: 4.4 mm Spiralänge (Flute Length): 47 mm Gesamtlänge (Overall Length): 80 mm Spitzenwinkel (Point Angle): 135° Schaft-Ausführung: fully ground (geschliffen) Ausführung: short (kurz) Anwendung: Drills for metal / Bohrer für Metall Norm: DIN 338 Für Bohrmaschine: Drilling Machine (Handbohrmaschine) Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill (MetavCUT, Type N) mainly used for? The MetavCUT Twist Drill (Type N) is primarily applied to the machining of high‑strength materials and larger drill diameters; its form allows straightforward re‑grinding and it endures higher mechanical loads, making it suitable for demanding metalworking tasks. Which three drill types are there? There are three common drill categories: metal drills, wood drills and stone/concrete drills. Why is a twist drill pointed (ausgespitzt)? The pointing reduces the cross‑cut at the drill tip, which significantly lowers friction and thus the required feed forces; at the same time the sharper point improves centring of the drill in the workpiece.
High-performance drilling for stainless and high-strength steels
The hss-e twist drill described here is a short, ground drill to DIN 338 type N, equipped with a 135° split point and a five per cent cobalt alloy. Engineered for situations where standard high-speed steel drills exhaust their capability, this cobalt twist drill maintains cutting performance under extreme temperatures and heavy loads.
How the drill achieves process reliability
The 5% cobalt content in the hss-e material raises red hardness and wear resistance, so the tool resists thermal softening during prolonged cutting. The flat 135° split point with cross grind ensures immediate centring on the workpiece, reducing the need for pre-spotting and preventing skidding on smooth surfaces. Fully ground flutes promote consistent, clean chip evacuation, making the drill suitable for hand and pillar drills even under continuous use.
Tangible benefits for production workflows
- extends tool life under high cutting temperatures, reducing tool changes and downtime
- enables reliable drilling of stainless steel (v2a, v4a), high-strength steels and weld seams
- self-centring point minimises the need for pilot holes and improves first-pass accuracy
- optimised flute geometry accelerates chip evacuation and lowers rework risk
- retains cutting edge longer than standard hss drills, supporting higher productivity
Metav as your precision partner
Metav combines decades of specialist know-how with a broad product range, acting as a practical quality filter from Emmerich. With over 48,000 customers and more than 250,000 products, Metav supplies reliable, workshop-ready solutions so procurement teams can consolidate suppliers and secure dependable stock levels for production.
Technical data
- material: hss-e (high-speed steel with cobalt alloy)
- cobalt content: 5% cobalt
- standard / type: DIN 338 type N
- geometry: short, ground profile, cross grind (split point)
- point angle: 135° split point
- suitable for: stainless steel (v2a, v4a), high-strength steels, weld seams
- performance traits: high heat resistance, increased wear resistance, self-centring on contact
- application machines: hand drills and pillar drills
- chip evacuation: fully ground flutes for smooth chip removal
FAQ
What makes this hss-e twist drill superior to standard hss drills?
The combination of hss-e material with 5% cobalt provides greater red hardness and wear resistance, so the cobalt twist drill keeps its cutting edge at higher temperatures and under more demanding cutting conditions than standard hss drills.
Can the hss-e drill work stainless steel without pre-spotting?
Yes. The 135° split point with cross grind produces immediate centring on most surfaces, so pre-spotting is generally unnecessary and the drill resists slipping on smooth stainless steel.
Which machines are appropriate for this cobalt twist drill?
The hss-e twist drill is designed for use in hand drills and pillar drills; the ground geometry and flute design support both manual and machine-fed operations.
How does the flute design affect drilling in difficult materials?
Fully ground flutes ensure consistent chip formation and evacuation, reducing heat build-up and preventing clogging when penetrating tough materials such as high-strength steels and welded zones.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com