Durable HSS-G double-ended body drill for precise sheet-metal work
This double-ended HSS-G body drill with a 135° split-point and cross grind is designed for efficient, low-wear drilling in thin sheet metal and automotive assembly, offering instant tip reversal to double tool life. Its short, compact geometry gives superior rigidity and break resistance for hand-held drilling and blind rivet removal, while the ground, uncoated finish reduces chip adhesion on aluminium and softer alloys. The 135° point with cross grind provides reliable self-centring on curved or painted panels, minimising wandering and often eliminating the need for pilot marking. Key workshop advantages include extended stand time, improved accuracy and reduced operator effort through the drill’s robust construction and optimised cutting geometry.
5.4mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — Twist Drill, Double-Sided, Bright Finished, HSS‑G, Fully Ground Shank, Ø 5.4 mm, 135° The Body Drill (Karosseriebohrer) is a double-sided Twist Drill designed for metalworking with a Drilling Machine, optimised for precise sheet‑metal and rivet hole applications. Double-sided design for two usable ends HSS‑G for precise, clean holes in metal Fully ground shank for high runout accuracy 135° point angle suited for harder materials Bright finished surface for smooth chip evacuation High precision and efficient metal cutting for professional results The HSS‑G material and fully ground geometry deliver higher sharpness and improved roundness compared with rolled drills. This means the Body Drill produces clean, precise holes in a range of metals while requiring less corrective work afterwards. The ground flutes ensure consistent chip removal and a stable cutting edge, which is especially beneficial when working with alloyed or unalloyed Steel and Cast Iron. Two usable ends and shorter, robust design for bodywork A double‑sided construction gives the practical advantage of two cutting tips in one tool, making it ideal for tight workshops and repetitive tasks on thin sheets. The shorter, stable profile reduces flex during drilling in thin materials common to automotive bodywork, allowing quick reversal to the second tip when one side dulls and supporting continuous production without frequent tool changes. Match the drill geometry to the task for longer tool life The 135° point angle is chosen for drilling harder workpieces such as Stainless Steel and tempered materials; a larger point angle reduces initial dwell and improves centring on tough surfaces. For best results use a steady feed, appropriate cutting fluid and moderate speeds with a Drilling Machine. The term Twist Drill refers to the spiral‑fluted design that removes material as it cuts; here it means efficient evacuation of chips and stable penetration into metal. Who benefits from this Body Drill and when to use it Workshops, vehicle body repair shops and maintenance technicians gain most from this tool: it is designed for metal drilling, especially where rivet holes or precise through‑holes are required. The combination of HSS‑G and a bright finish suits users who prioritise dimensional accuracy and clean hole quality, while the double‑ended layout keeps inventory compact and economical for everyday production tasks. For reliable, fast and precise sheet‑metal drilling choose the MetavCUT Standard Line Body Drill — for personal technical advice or to confirm suitability contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58054-FDA Diameter: 5.4 mm Overall length: 62 mm Spiral length: 16 mm Point angle: 135° Execution: double-sided Shank execution: fully ground Material: HSS-G Colour: Bright finished For Drilling Machine: Drilling Machine (Hand drill) Model series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Body Drill (Karosseriebohrer) by MetavCUT designed for? The MetavCUT Body Drill (a Twist Drill for metal) is intended primarily for drilling in metals, especially for sheet‑metal and rivet holes; its HSS‑G construction and ground geometry give precise, clean boreholes in alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and certain hard plastics. Can the MetavCUT Body Drill be used in a standard Drilling Machine? Yes, the Body Drill is made for use with a Drilling Machine (hand drill or bench drill); to preserve tool life, use controlled speeds, appropriate coolant and steady feed—especially when working in harder materials suited to the 135° point angle. For what is a Twist Drill used? A Twist Drill is mainly used for machining high‑strength workpieces and larger drill diameters; this shape is easy to resharpen and withstands higher loads. Its ground HSS form can deliver up to 40% faster drilling with reduced feed force compared with conventional HSS, making it well suited to metalworking and bodywork applications. Which three drill types exist? There are three main drill types: Metal drills, Wood drills, and Stone/Concrete drills.
5.5mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Die Kombination aus HSS-G Schneide, 135° Spitzenwinkel und doppelseitiger Ausführung sorgt für schnelle, präzise Bohrungen in Stahl und Blech. Bestellen Sie den Karosseriebohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Karosseriebohrer von MetavCUT – HSS-G Doppelendbohrer für Metall Der Karosseriebohrer ist ein kurz ausgelegter, beidseitig nutzbarer Bohrer für präzise Lochungen in Stahl, Guss und Nichteisenmetallen mit Fokus auf Karosserie- und Blecharbeiten. Geschliffenes HSS-G: hohe Schärfe, präzise Bohrung Doppelendbohrer: beidseitig einsetzbar für hohe Wirtschaftlichkeit 5,5 mm Durchmesser: Standardgröße für Karosseriearbeiten 135° Spitzenwinkel: reduziert Anlaufreibung bei harten Werkstoffen Für Handbohrmaschine geeignet: flexibel einsetzbar Hohe Schneidleistung durch geschliffenes HSS-G Dank der HSS-G Ausführung liefert der Bohrer eine sehr scharfe Schneide und eine hohe Rundlaufgenauigkeit. Diese Eigenschaft führt zu sauberer Bohrlochqualität und reduziert Nacharbeit an der Kante. Für Anwender bedeutet das weniger Kraftaufwand beim Bohren und eine spürbare Zeitersparnis beim Durchgang durch legierten und unlegierten Stahl. Die geschliffene Geometrie eignet sich besonders für den Einsatz in stationären und handgeführten Maschinen bei moderater Kühlung. Stabilität und Eindringverhalten durch 135° Spitzenwinkel Der 135° Spitzenwinkel sorgt für ein ruhigeres Anbohren in harten Werkstoffen und verringert das Wandern des Bohrers beim Ansetzen. Dies führt zu präziseren Passungen und weniger Ausreißern bei dünnen Blechen. Anwender profitieren von gleichmäßigeren Bohrkratern und einer besseren Führung, besonders bei Serienarbeiten in der Karosserie- und Instandhaltung. Doppelseitige Bauform als wirtschaftlicher Vorteil Die doppelseitige Ausführung als Doppelendbohrer bietet zwei Schneiden in einem Werkzeug und verdoppelt damit die Einsatzdauer vor einem Austausch. Diese Bauweise ist besonders praktisch bei schnellen Reparaturarbeiten am Fahrzeugblech oder beim Austausch kleinster Befestigungselemente, da das Umdrehen bei stumpfer Spitze sofortige Weiterarbeit ermöglicht. Das spart Zeit und reduziert Werkzeugwechsel in der Werkstatt. Einsatzbereich, Maschine und Anwendungsrichtlinien Dieser Bohrer ist für den Einsatz in der Handbohrmaschine konzipiert und eignet sich für Bohrungen in Karosserieblech, Temperguss sowie in Nichteisenmetallen. Um beste Ergebnisse zu erzielen, empfiehlt sich ein Anpunkten mit Zentrierstift bei hoher Präzision und eine Kühlschmierstoffführung bei lang andauernden Bohrungen. Durch die kompakte Gesamtlänge ist der Bohrer besonders handlich und kommt in beengten Raumverhältnissen zum Einsatz. Empfehlen Sie den geschliffenen Doppelendbohrer von MetavCUT als regelmäßige Ergänzung für Ihre Werkstatt; bei offenen Fragen erreichen Sie die Beratung von Metav Werkzeuge per eMail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 58055-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Karosseriebohrer Fakten Durchmesser: 5,5 mm Gesamtlänge: 66 mm Spirallänge: 16 mm Spitzenwinkel: 135° Verpackungseinheit: 10 St Besonderheiten Material: HSS-G (geschliffen, hohe Schärfe) Ausführung: doppelseitig (Doppelendbohrer) Schaftausführung: geschliffen Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Farbe: blank Hersteller: MetavCUT Modellserie: Standard Line FAQ Wie eignet sich der Bohrer für Karosserieblech? Der Karosseriebohrer von MetavCUT ist aufgrund der geschliffenen HSS-G Schneide und des 135° Spitzenwinkels gut geeignet für saubere Bohrungen in Karosserieblech ohne übermäßiges Ausreißen der Kante. Kann der Bohrer in einer Akku-Bohrmaschine verwendet werden? Ja, der Bohrer ist für die Nutzung in der Handbohrmaschine ausgelegt; bei Akku-Bohrmaschinen auf passende Drehzahl und gleichmäßigen Anpressdruck achten, um Bruch zu vermeiden. Was bedeutet doppelseitige Ausführung praktisch? Bei einem Doppelendbohrer steckt an beiden Enden eine Schneide; wenn eine Seite stumpf wird, kann der Bohrer umgedreht und weiterverwendet werden, was die Wirtschaftlichkeit erhöht. Welche Materialien bearbeitet der Bohrer zuverlässig? Der Bohrer ist geeignet für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Temperguss sowie Nichteisenmetalle und Hartkunststoff, dank der geschliffenen HSS-G Geometrie. Welche SKU hat dieses Modell für Nachbestellungen? Das Modell wird unter der SKU 58055-FDA geführt; bei MetavCUT Bestellungen kann diese Artikelnummer zur schnellen Identifikation verwendet werden.
5.6mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Die Kombination aus HSS-G-Material und Doppelendbohrer-Konstruktion liefert schnelle, präzise Bohrergebnisse bei Blech- und Karosseriearbeiten; die 5,6 mm-Ausführung überzeugt durch Stabilität und einfache Handhabung. Für gezielte Beratung oder Direktbezug steht Metav als verlässlicher Partner bereit. Karosseriebohrer »58056-FDA« von MetavCUT Der Karosseriebohrer »58056-FDA« ist ein doppelseitiger, geschliffener Spiralbohrer für präzise Metall- und Blechbohrungen mit 135° Spitzenwinkel. Karosseriebohrer »58056-FDA« von MetavCUT Doppelendbohrer, beidseitig einsetzbar HSS-G geschliffen für saubere Metallbohrungen 5,6 mm Durchmesser, Standard-Bereich geeignet 135° Spitzenwinkel für härtere Werkstoffe Hohes Tempo und saubere Bohrbilder durch geschliffenes HSS-G Der HSS-G-Werkstoff kombiniert Härte mit Schnittqualität und ermöglicht ein bis zu 40 % schnelleres Bohren bei reduziertem Anpressdruck. Geschliffene Geometrie sorgt für sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in legierten und unlegierten Stählen, Gusseisen sowie Nichteisenmetallen ergibt. Als Vorteil bleibt weniger Nacharbeit an den Kanten erforderlich. Kompakte Doppelendkonstruktion für effektiven Werkzeugeinsatz Als Doppelendbohrer ausgeführt, bietet der Bohrer de facto zwei Nutzseiten in einem Werkzeug, was Lageraufwand reduziert und Stillstandzeiten minimiert. Die kurze, stabile Bauform unterstützt präzises Anbohren in Dünnblech und Karosseriebauteilen. Die Spirallänge von 16 mm begünstigt effiziente Spanabfuhr bei flachen bis mitteltiefen Bohrungen. Geeignet für mobile Werkstätten und Standard-Anwendungen Mit 5,6 mm Durchmesser fällt der Bohrer in den Standard-Bereich und ist damit ideal für Werkstatt, Montage und Handhabung mit einer Handbohrmaschine. Für dünne bis mittlere Bleche, Profile und Allgemeinbearbeitung ist die Ausführung sehr gut geeignet; bei besonders hoher Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer zur Vermeidung von Wandern. Hinweise zur Anwendung und Pflege für längere Standzeiten Der 135° Spitzenwinkel erleichtert das Eindringen in härtere Werkstoffe und reduziert das Anlaufverhalten, jedoch kann geschliffenes HSS spröder reagieren als gewalztes Material. Kühlung während des Bohrens verlängert die Lebensdauer und verhindert Überhitzung; moderater Vorschub sorgt für saubere Spanbildung. Bei anspruchsvollen Serienaufgaben ist der Einsatz stationärer Maschinen empfehlenswert. Empfehlung: Für zuverlässige Blech- und Karosseriearbeiten den Karosseriebohrer von MetavCUT aus der Standard Line wählen; Bestellung und technische Beratung über Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Technische Daten Artikelnummer: 58056-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Karosseriebohrer Fakten Durchmesser: 5,6 mm Gesamtlänge: 66 mm Spirallänge: 16 mm Spitzenwinkel: 135° Besonderheiten Ausführung: doppelseitig Material: HSS-G (geschliffen) Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 FAQ Ist dieser Bohrer für Edelstahl geeignet? Der Karosseriebohrer »58056-FDA« von MetavCUT ist mit 135° Spitzenwinkel für härtere Werkstoffe ausgelegt und eignet sich für viele Edelstahlarten, wobei Kühlung und angepasste Schnittparameter empfohlen werden. Wie oft kann die zweite Spitze genutzt werden? Die doppelseitige Ausführung ermöglicht die Nutzung der zweiten Spitze solange die Schneiden noch intakt sind; bei deutlicher Verschleißerscheinung sollten die Kanten nachgeschliffen oder der Bohrer ersetzt werden. Passt der Bohrer in handelsübliche Akkubohrmaschinen? Ja, die Geometrie und der Durchmesser machen den Bohrer geeignet für Handbohrmaschinen und mobile Anwendungen im Standard-Bereich. Wofür ist die Spirallänge von 16 mm geeignet? Die Spirallänge von 16 mm ermöglicht effiziente Spanabfuhr bei flachen bis mitteltiefen Bohrungen in Blech und Profilen; für sehr tiefe Löcher sind andere Ausführungen empfehlenswert. Wird der Bohrer geschliffen oder gewalzt geliefert? Der Bohrer ist geschliffen (HSS-G), was für scharfe Kanten und hohe Präzision sorgt, aber erhöhte Vorsicht bei Biegebeanspruchung erfordert.
5.7mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Karosseriebohrer (Body Drill) — 5.7 mm, 135° tip, double-sided, bright finished, HSS‑G The Karosseriebohrer (Body Drill) is a double-sided Twist Drill designed for precise drilling in metal with a 135° tip angle and a bright finished surface for reliable chip evacuation and visibility. Double-ended design for doubled tool life Fully ground HSS‑G for fast, clean metal drilling 135° tip for improved entry in hard materials Bright finished surface for corrosion resistance and visibility Suitable for Hand Drills and Drilling Machines Faster, cleaner holes in demanding metal work Engineered as a double-sided Twist Drill, this Body Drill delivers efficient performance when working with alloyed and unalloyed steels. The HSS‑G (ground High Speed Steel) geometry produces sharp cutting edges and excellent run-out accuracy, so the tool creates clean, concentric holes with reduced burr formation. For users who process tough materials, the 135° Tip reduces walking and shortens the initial penetration time, which makes setup and pilot drilling faster and more predictable. Robust design that extends usability in workshop routines The double-ended execution means the drill effectively provides two cutting ends in one compact shank, offering a practical redundancy: if one tip becomes dull, simply reverse the tool to use the second cutting end. The fully ground shank and CNC-style flute grinding result in consistent chip removal and less heat build-up during intermittent drilling. As a result, operators benefit from longer effective tooling life and fewer tool changes during production runs. Tailored for metalworking and bodyshop applications This Body Drill is intended primarily for drilling in metal—especially in thin sheet and bodywork contexts—where short, stable drills are preferred. The bright finished surface supports visibility and helps with corrosion resistance in workshop environments. When paired with appropriate cutting fluid and steady feed, the Twist Drill performs reliably in materials such as steel, cast components, non-ferrous metals and certain engineering plastics, making it a versatile choice for metal fabrication and repair tasks. Who benefits most from this tool Mechanics, metal fabricators and maintenance technicians who require precise, repeatable holes in sheet metal and structural components will appreciate the combination of double-sided functionality and the HSS‑G cutting geometry. The Body Drill is also suitable for users of portable Hand Drills as well as stationary Drilling Machines, offering flexibility across workshop setups without sacrificing hole quality. For application advice or to confirm suitability for a specific material or machine, METAV Werkzeuge provides expert consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930 Strong recommendation:_ Choose the MetavCUT Body Drill for demanding metalwork where precision and uptime matter most — METAV Werkzeuge offers professional advice and support via email, phone and WhatsApp for fitting the right drill to your workflow Designation: Karosseriebohrer (Body Drill) Marke: MetavCUT SKU: 58057-FDA Diameter: 5.7 mm Tip Angle: 135° Spiral Length: 16 mm Overall Length: 66 mm Execution: double-sided Shaft Finish: fully ground Material: HSS-G Colour / Surface: bright finished Intended For: Drilling Machine / Hand Drill Model Series: Standard Line Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Karosseriebohrer from MetavCUT suitable for? The MetavCUT Karosseriebohrer (Body Drill) is optimized for metalworking; its HSS‑G ground geometry is suitable for alloyed and unalloyed steels, cast components, non-ferrous metals and certain hard plastics, delivering clean holes when used with correct speeds and cooling. How does the double-sided design affect tool life and workflow? With the MetavCUT Karosseriebohrer double‑sided Twist Drill, each end functions as an independent cutting tip, so reversing the drill provides immediate reuse of the second edge, reducing downtime for tool changes and extending overall service life under similar wear conditions. For what is a Twist Drill used? A Twist Drill is primarily used for machining high‑strength materials and large drill diameters; its form allows relatively easy sharpening and it withstands higher loads, making it well suited for tasks such as holes for rivets and thin‑sheet metal work. Which three drill types exist? The main categories are Metal drills, Wood drills, and Stone / Concrete drills. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross edge at the drill tip, which lowers friction and required feed forces; that sharpening also improves centring of the tip in the workpiece for more accurate starts. Can you drill wood with a Twist Drill? A Metal Twist Drill can be used in wood, but guidance and finish are inferior compared with wood‑specific bits; the metal drill is easier to resharpen and shows less aggressive self‑feeding. For which drilling depths is the Twist Drill most commonly used? A through‑hole in solid material is frequently made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE steels are categorically superior to HSS is incorrect; selection should consider working conditions to determine whether the higher cost of HSSE is justified for the specific application.
5.8mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Karosseriebohrer — Body Drill, HSS‑G, 5.8 mm, 135° tip, double‑sided, bright finished by MetavCUT The Karosseriebohrer is a double‑sided Body Drill designed for precision metalworking with handheld Drilling Machines, ideal for thin sheet and structural metal applications. Double‑ended design for extended tool life Ground HSS‑G for fast, precise metal drilling 5.8 mm diameter with 135° tip for harder steels Fully ground shank for high concentricity Bright finished surface for smooth chip evacuation High performance through ground HSS geometry The HSS‑G construction of this Body Drill delivers a sharp, consistent cutting edge that reduces cutting forces and improves drilling speed. Because the flute geometry is produced by CNC grinding rather than rolling, the result is higher Rundlaufgenauigkeit and cleaner holes in alloyed and unalloyed steels. For users working with tougher materials, the 135° point angle shortens penetration time and improves centring on stainless steels and cast materials. This engineered geometry is particularly beneficial where reproducible hole quality is required. Practical benefits of the double‑ended design A double‑sided, or double‑ended, configuration makes the tool exceptionally economical in workshop routines. When one tip becomes blunt, the drill can be reversed to use the other cutting end, effectively providing two usable tips in one compact Twist Drill. This format is especially useful for operations on sheet metal and bodywork where short, stable drill bits reduce vibration and improve control with a Drilling Machine. Precision shaft and reliable handling The fully ground shank ensures secure clamping and improved concentricity in hand drills, translating to straighter holes and reduced wobble. The bright finished surface supports smoother chip flow and reduces the risk of material build‑up on the flutes. For craftsmen and technicians who expect repeatable results when machining Nichteisenmetalle or engineering plastics, this characteristic increases process reliability and reduces rework. Application focus and user groups Engineered as a Body Drill for metalworking, this tool is aimed at professional metalworkers, sheet metal fabricators and maintenance technicians who require robust, short‑length bits for rivet and thin‑sheet holes. The combination of HSS‑G and a 135° tip makes it suitable for a range of materials including cast iron, sintered iron and hard plastics. For workshop environments that demand predictable tool behaviour and easy re‑use, the double‑ended format and ground finish provide a pragmatic advantage. Safety and usage notes for best results To maximise life and performance, use the Karosseriebohrer with adequate cooling when machining harder alloys; the ground HSS form can be more brittle than rolled variants and benefits from moderated speeds and lubrication. Secure clamping, reduced feed force and intermittent peck drilling help avoid overload. For handheld Drilling Machine operations, ensure the chuck grips the fully ground shank firmly to maintain accuracy and reduce chatter. Choose MetavCUT precision — favour the Karosseriebohrer Body Drill with HSS‑G ground cutting for demanding metalwork and contact METAV Werkzeuge for expert advice or ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Information Designation: Karosseriebohrer Brand: MetavCUT SKU: 58058‑FDA Product type: Body Drill Material: HSS‑G Execution: double sided Colour: bright finished Diameter: 5.8 mm Point angle: 135° Spiral length: 16 mm Overall length: 66 mm Shank finish: fully ground For Drilling Machine: Drilling Machine Application: Drills for metal Model series: Standard Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Karosseriebohrer Body Drill by MetavCUT suitable for? The Karosseriebohrer Body Drill from MetavCUT is optimized for metalworking and performs well in alloyed and unalloyed steels, Cast Iron, Sintered Iron and hard plastics; its HSS‑G grind provides clean hole quality under appropriate speeds and cooling. Can the Karosseriebohrer be used in a handheld drilling machine? Yes, the Karosseriebohrer by MetavCUT is intended for use with a Drilling Machine; the fully ground shank ensures secure clamping and high concentricity in handheld setups when the chuck is tightened correctly. For what is a Twist Drill used? A Twist Drill is primarily applied to machining high‑strength materials and larger drill diameters; its form is easy to grind and withstands greater loads, which makes it suitable for demanding metalworking tasks. Which three drill types are there? The main categories are metal drills, wood drills and stone/concrete drills. Each is optimised in geometry and material for its specific application.
5.9mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Die Kombination aus HSS‑G‑Schliff, Doppelendbohrer‑Ausführung und dem 135° Spitzenwinkel bietet langlebige Präzision und schnelle Bohrfortschritte in Metall. Bestellen Sie den Karosseriebohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Karosseriebohrer von MetavCUT (Doppelendbohrer) Karosseriebohrer aus geschliffenem HSS‑G für präzise Metallbohrungen mit kurzer Bauform und hoher Rundlaufgenauigkeit Doppelendbohrer: beidseitig einsetzbar Geschliffene HSS‑G‑Geometrie für Metall 135° Spitzenwinkel für harte Werkstoffe Für Handbohrmaschine geeignet, kurze Bauform 5,9 mm Durchmesser, präziser Rundlauf Höhere Effizienz durch geschliffene HSS‑G‑Geometrie Geschliffene HSS‑G‑Bohrer bieten im Vergleich zu gewalzten Ausführungen eine deutlich schärfere Schneide und eine bessere Rundlaufgenauigkeit, was saubere Bohrlöcher in legierten und unlegierten Stählen ermöglicht. Das Ergebnis ist eine Reduktion der Anpresskraft und ein schnellerer Vorschub, was besonders bei wiederkehrenden Arbeiten Zeit spart. Für Anwender bedeutet das einen messbaren Produktivitätsgewinn und weniger Gratbildung an den Bohröffnungen. Kurzbauweise und doppelseitige Funktion für die Werkstattpraxis Die kurze Bauform und die Doppelendbohrer‑Ausführung machen das Werkzeug flexibel einsetzbar, besonders in der Karosserie‑ und Blechbearbeitung. Ist eine Spitze stumpf, kann die andere Seite sofort genutzt werden, was Ausfallzeiten reduziert. In Kombination mit einer Handbohrmaschine bleibt die Führung stabil, sofern die Drehzahl und der Vorschub an das Material angepasst werden. Technische Anpassung an härtere Werkstoffe dank 135° Spitzenwinkel Ein Spitzenwinkel von 135° verringert das Anlaufverhalten bei härteren Werkstoffen und erhöht die Zentrierstabilität beim Anbohren. Das ist vorteilhaft beim Bohren in Gussstahl, Sintereisen und teilweise gehärteten Bauteilen. Der größere Winkel reduziert das Risiko des „Wanderns“ beim Anbohren und erleichtert die Verarbeitung anspruchsvollerer Materialien ohne aufwändige Vorarbeit. Einsatzbereich, Zielgruppe und Handhabungsempfehlung Dieser Bohrertyp richtet sich an Fachbetriebe und versierte Heimwerker, die regelmäßig Metall bearbeiten und Wert auf schnelle Wechselbarkeit legen. Für den besten Verschleißschutz empfiehlt sich stationäre Kühlung oder zyklisches Schmiermittel bei längerer Dauerbeanspruchung. Bei präzisen Passungen ist ein Zentrierbohrer vorzuarbeiten, um die beste Genauigkeit zu erzielen. Vorteil für die Beschaffung und Qualitätskontrolle MetavCUT‑Ausführungen in der Standard Line bieten eine Kombination aus gebrauchsfertiger Präzision und wirtschaftlicher Handhabung. Durch die geschliffene Schaftausführung bleibt der Rundlauf auch unter Belastung stabil, was die Ausschussrate reduziert und Nacharbeit minimiert. So lässt sich die Werkstattorganisation straffen und die Ersatzteilbevorratung effizient planen. Empfehlung: Den geschliffenen HSS‑G Doppelendbohrer von MetavCUT über Metav Werkzeuge beziehen; bei technischen Fragen kontaktieren Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930, alternativ WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 58059-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Karosseriebohrer Fakten Durchmesser: 5,9 mm Gesamtlänge: 66 mm Spirallänge: 16 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Ausführung: doppelseitig Schaftausführung: geschliffen Für Bohrmaschine: Handbohrmaschine Farbe: blank SKU: 58059-FDA FAQ Für welche Materialien eignet sich dieser Bohrer am besten? Der geschliffene HSS‑G Bohrer von MetavCUT eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie für Nichteisenmetalle und Hartkunststoffe; bei sehr zähen Werkstoffen ist auf Kühlung zu achten. Kann der Bohrer in einer handelsüblichen Handbohrmaschine verwendet werden? Ja, die Konstruktion ist für die Nutzung mit einer Handbohrmaschine ausgelegt, solange die Maschine ausreichend Drehzahl und eine stabile Führung bietet. Was bedeutet die Angabe 135° beim Spitzenwinkel? Ein Spitzenwinkel von 135° reduziert das Anlaufverhalten und verbessert die Zentrierung beim Bohren in härtere Werkstoffe; das führt zu saubereren Bohrlöchern und weniger Ausrissen. Wie wirkt sich die geschliffene Ausführung auf die Leistung aus? Die geschliffene Geometrie (HSS‑G) sorgt für schärfere Schneiden und höhere Rundlaufgenauigkeit, was schnellere Vorschübe und geringeren Kraftaufwand ermöglicht.
5mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill Karosseriebohrer — Double-Sided HSS-G, Ø 5 mm, 135° The Body Drill is a double-ended twist drill designed for precision metalworking and sheet‑metal applications with a bright finish and fully ground geometry. Double‑ended design for two usable tips HSS‑G for high precision in hard materials Fully ground shank for improved runout accuracy 135° point angle suited for tougher steels Compact length ideal for rivet and sheet‑metal holes Faster throughput with a ground HSS design The HSS‑G material combined with a fully ground geometry yields notably sharper cutting edges and consistent concentricity, which directly improves hole quality. This construction allows more reliable penetration in alloyed and unalloyed steels while producing clean, burr‑reduced holes. The result is higher process reliability and less rework in series production or repair tasks, making the tool highly beneficial for professional metalworkers and bodyshop technicians. Lower effort thanks to optimized cutting geometry A double‑sided configuration offers practical redundancy: when one tip dulls, the drill can be reversed to use the second cutting end, effectively providing two serviceable tips in a short, stable body. The ground geometry reduces required thrust and improves chip evacuation; in practice this can lead to noticeably faster drilling and reduced operator fatigue, especially when machining thicker or tougher materials on a Drilling Machine. Built for demanding materials and precise centring The 135° point angle is chosen to reduce chipping and improve centring in harder workpieces such as stainless steel and temperguss. This angle diminishes initial bite while improving guidance into the workpiece, which is advantageous for accurate spot drilling and finishing holes in cast and sintered materials. For best life expectancy, use with appropriate cooling and avoid aggressive hammering; the geometry trades some toughness for cutting precision, so stationary or well‑supported drilling is recommended. Practical application, maintenance and compatibility As a compact Body Drill with Ø 5 mm and 62 mm total length, the tool is tailored to sheet‑metal, panel repair and rivet preparation where short, stable drills perform better than long, flexible ones. Compatibility with standard hand and benchtop drilling machines makes it versatile in workshop environments. If refurbishment is needed, the ground helical flutes permit straightforward resharpening; note that ground HSS drills may be more brittle than rolled types and benefit from controlled cutting parameters. Strong recommendation: Choose the MetavCUT double‑sided HSS‑G Body Drill for precise sheet‑metal and repair work — for tailored technical advice and application support contact METAV Werkzeuge: info@metav-werkzeuge.com · Phone +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand/Manufacturer: MetavCUT SKU: 58050-FDA Diameter: 5 mm Total length: 62 mm Spiral length: 16 mm Point angle: 135° Execution: double sided Shank execution: fully ground Material: HSS-G Colour: bright finished For machine: Drilling Machine (Handbohrmaschine) Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and where does the MetavCUT Body Drill fit in? The Twist Drill, exemplified by the MetavCUT Body Drill, is mainly used for machining high‑strength materials and larger drill diameters; its design is easy to sharpen and endures higher loads, making it suitable for applications such as steel, cast materials and hard plastics where durable, precise holes are required. Which three drill types are commonly distinguished? The main categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Body Drill belongs to the metal drill group and is optimised for professional metalworking tasks.
6.2mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Der geschliffene Karosseriebohrer kombiniert Präzision und Alltagstauglichkeit: Die HSS‑G‑Geometrie ermöglicht bis zu 40 % schnelleres Bohren bei deutlich geringerer Anpresskraft, die doppelseitige Ausführung verlängert die Nutzungsdauer durch Umkehrbarkeit, und der 135° Spitzenwinkel sorgt für saubere Ansätze in härteren Werkstoffen. Nutzen Sie diese Kombination aus Effizienz, Stabilität und hoher Rundlaufgenauigkeit und beziehen Sie den Bohrer direkt über Metav oder klären Sie Details telefonisch oder per E‑Mail. Karosseriebohrer »58062-FDA« von MetavCUT (HSS‑G, 6,2 mm) Der Karosseriebohrer ist ein doppelseitig ausgeführter HSS‑G‑Bohrer, konzipiert für präzise Metallbohrungen in Werkstatt und Karosseriebau Karosseriebohrer »58062-FDA« von MetavCUT Geschliffenes HSS‑G für präzise Metallbohrungen Doppelendbohrer: beidseitig einsetzbar 6,2 mm Durchmesser, Spirallänge 16 mm 135° Spitzenwinkel für härtere Werkstoffe Effiziente Leichtarbeit dank geschliffener HSS‑Geometrie Die geschliffene HSS‑G‑Geometrie reduziert die Anbohrkräfte deutlich und ermöglicht ein bis zu 40 % schnelleres Bohren gegenüber herkömmlichen HSS‑Bohrern. Für Anwender bedeutet das weniger Ermüdung bei wiederkehrenden Bohrvorgängen und eine höhere Produktivität in der Werkstatt. Außerdem führt der CNC‑Schliff zu sehr scharfen Schneiden und hoher Rundlaufgenauigkeit, was saubere Bohrlöcher in legierten und unlegierten Stählen, Gusswerkstoffen sowie Hartkunststoffen fördert. Doppelseitige Bauform für geringere Stillstandszeiten Die doppelseitige Ausführung macht den Bohrer besonders wirtschaftlich: Ist eine Spitze stumpf, kann der Bohrer einfach gewendet werden, so dass ein zweites Schneidenpaar sofort verfügbar ist. Die kompakte, stabile Bauform eignet sich speziell für Niet‑ und Dünnblecharbeiten in der Karosseriebranche und reduziert den Bedarf an Ersatzbohrern. Aufgrund der geschliffenen Fertigung sollte bei stationärer Nutzung eine angemessene Kühlung eingesetzt werden, um Bruchrisiken zu minimieren. Praxisgerechte Einsatzempfehlungen und Zielgruppe Mit 6,2 mm Durchmesser gehört der Bohrer zum Standard‑Bereich und ist ideal für Werkstätten, Karosseriebau und montageorientierte Anwender sowie für viele Heimwerkerprojekte. Für besonders präzise Anwendungen empfiehlt sich Vorzentrieren mit einem Zentrierbohrer, um Wandern beim Anbohren zu vermeiden. Die KombinaÂtion aus 135° Spitzenwinkel und geschliffener Schaftausführung sorgt für saubere Ansätze, besonders beim Bohren in härtere Materialien; bei zähen Werkstoffen Kühlung und moderater Vorschub verwenden. Empfehlung: Setzen Sie auf die MetavCUT Standard Line für langlebige, präzise Blecharbeiten und ordern Sie den Karosseriebohrer direkt über Metav per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 58062-FDA Marke: MetavCUT Bezeichnung: Karosseriebohrer Serie: Standard Line Verpackungseinheit: 10 Anwendung: Bohrer für Metall Ausführung: doppelseitig Fakten Durchmesser: 6,2 mm Gesamtlänge: 66 mm Spirallänge: 16 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Hinweis: G = geschliffen – scharfe Kanten, hohe Rundlaufgenauigkeit FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Karosseriebohrer Standard Line (SKU 58062‑FDA) eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff und liefert in diesen Werkstoffen saubere Bohrbilder. Kann der Bohrer mit einem Akku‑Bohrer verwendet werden? Ja, der Karosseriebohrer ist für den Einsatz mit handgeführten Bohrmaschinen geeignet; bei 6,2 mm Durchmesser empfiehlt sich jedoch vorheriges Zentrieren für sehr präzise Passungen, um Wandern beim Anbohren zu vermeiden. Was bedeutet doppelseitig konkret in der Praxis? Doppelseitig heißt, dass der Bohrer an beiden Enden eine Schneide besitzt; dies erlaubt einfaches Wenden im Schadensfall und reduziert Stillstandszeiten, was besonders bei Niet‑ und Dünnblecharbeiten vorteilhaft ist. Wie lässt sich die Bruchgefahr bei geschliffenen HSS‑Bohrern minimieren? Um Bruchrisiken zu reduzieren, sollte der geschliffene HSS‑G‑Bohrer mit moderatem Vorschub, geeigneter Drehzahl und, bei zähen Werkstoffen, mit Kühlung betrieben werden; stationäre Befestigung oder stabile Führung erhöht die Lebensdauer deutlich.
6.5mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Karosseriebohrer — Body Drill, 6.5 mm, 135° tip, double sided, Bright Finished, HSS‑G, Fully Ground Shank The Karosseriebohrer is a double sided Body Drill designed for Drilling Machine applications, delivering precise metal drilling with a 135° tip and a Fully Ground HSS‑G geometry for tough materials. Double-ended design for twice the usable life HSS‑G ground geometry for precise metal drilling 135° tip for harder materials such as stainless steel Fully ground shank for improved runout accuracy Bright finish for corrosion resistance and visual inspection Exceptional Material Performance and Cutting Efficiency The Karosseriebohrer from MetavCUT combines a HSS‑G composition with CNC grinding to produce extremely sharp Cutting Edges and a consistent Spiral Geometry. This Ground Manufacturing method yields high Roundness Accuracy and clean, burr‑reduced holes in metals. The optimized geometry enables up to 40% faster drilling and requires up to 50% less thrust compared with conventional HSS variants, which directly reduces operator fatigue and cycle times in production environments. Built for Harder Materials and Reliable Hole Entry A 135° Tip Angle reduces walking and improves centring when working with tougher substrates like Stainless Steel, Cast Steel and other alloyed Steels. The double ended layout makes the Tool inherently more compact and stable, a design often favoured in bodywork and Sheet Metal operations where short, accurate holes are critical. Because the Bit can be reversed when one end dulls, downtime for tool changes is minimized while precision remains high. Precision Features That Support Workshop Standards The Fully Ground Shank and Bright Finished surface support consistent Tool Runout and easy visual inspection. Ground Flute Geometry creates clean chip evacuation and precise chip formation, resulting in smoother hole walls and less rework. Note that Ground HSS grades can be more brittle than rolled equivalents, so cooling and sensible feed rates are recommended for station‑type drilling and high‑duty cycles to extend Tool Life. Practical Application, Handling and Suitability This Body Drill is intended for Drilling Machine usage across a range of metals including unalloyed and alloyed Steel, Cast Iron variants and Non‑Ferrous Metals, as well as Hard Plastics. The double‑ended Twist Drill design is particularly suitable for workshop and industrial settings where short, precise holes are required and quick tool rotation between ends increases uptime. For hand tool operations, ensure compatible chucks and take appropriate safety measures. We recommend the MetavCUT Standard Line Karosseriebohrer for professionals requiring fast, accurate metal drilling; METAV Werkzeuge offers expert advice and technical support—contact via info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations and application guidance Designation: Karosseriebohrer / Body Drill Brand: MetavCUT SKU: 58065-FDA Diameter: 6.5 mm Tip Angle: 135° Spiral Length: 20 mm Overall Length: 70 mm Execution: double sided Shank Execution: fully ground Material: HSS‑G For Drilling Machine: Drilling Machine Colour: Bright Finished Model Series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best application for the Karosseriebohrer Body Drill by MetavCUT? The Karosseriebohrer Body Drill from MetavCUT is primarily used for precise metalwork, especially where short, accurate holes are required in Sheet Metal and Bodywork components; its double‑ended Twist Drill design and HSS‑G grinding make it suitable for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics. Can the Karosseriebohrer Body Drill by MetavCUT be used in hand drills? Although the Karosseriebohrer Body Drill by MetavCUT is optimised for Drilling Machine applications, it can be used in appropriately rated Hand Drills if the chuck and operational parameters match the Tool requirements; for best results and safety, check recommended speeds and cooling. For what are Twist Drills used? A Twist Drill such as the Karosseriebohrer Body Drill by MetavCUT is mainly applied to the machining of high‑strength materials and larger hole diameters; the shape is easy to regrind and stands up to higher loads, making it a common choice for robust metalworking tasks. Which three drill types exist? Typical categories include Metal Drill, Wood Drill and Stone/Concrete Drill; the Karosseriebohrer by MetavCUT belongs to the Metal Drill family and is designed for demanding metal applications. Why are Twist Drills point‑sharpened? Point sharpening reduces the cross‑edge at the tip of a Twist Drill; for the Karosseriebohrer Body Drill by MetavCUT this lowers friction, reduces required feed force and improves centring, leading to cleaner holes and more controlled drilling. Can a Metal Drill be used for wood? A Metal Drill such as the Karosseriebohrer by MetavCUT can be used in Wood, but it typically offers poorer guidance and a less clean finish than a dedicated Wood Drill; regrindability and lower self‑feed may be advantageous for specific tasks. For which drilling depths is the Twist Drill most used? The Twist Drill design is commonly used for through‑holes and solid drilling; for diameters up to around 20 mm and depths up to approximately 100 mm a Twist Drill like the Karosseriebohrer Body Drill by MetavCUT is often the preferred tool. Is HSS or HSSE better for my application? The general belief that HSSE is always superior to HSS is not universally correct; evaluate whether the working conditions for the Karosseriebohrer Body Drill by MetavCUT require the additional cost of HSSE, considering cutting speed, material and coolant use before deciding.
6mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill — Twist Drill, 6 mm, 135° Tip, Double-Sided, Bright Finished, Fully Ground Shank, HSS‑G, Standard Line The Body Drill is a double-sided Twist Drill designed for precision metalworking and bodywork applications on drilling machines. Double-ended Twist Drill for extended use HSS-G construction for precise metal holes 6 mm diameter with 135° tip for hard steels Fully ground shank ensures high runout accuracy Outstanding cutting performance for demanding metals The Body Drill combines a HSS‑G cutting geometry with a 135° tip angle to penetrate harder materials with reduced wander and improved centring. This combination results in clean, precise holes in legierten und unlegierten Stahl, Gusseisen, Temperguss and many non‑ferrous metals. The ground flute geometry (CNC grind) delivers sharp cutting edges and high concentricity, which is especially relevant when accuracy matters in assembly or bodywork. Practical double-ended design reduces downtime Thanks to its double-sided execution the Twist Drill acts like two tools in one: if one tip dulls, the drill can be reversed and the opposite cutting end used immediately. This design is particularly advantageous in production or repair environments where quick turnarounds are essential. With a 6 mm diameter and a compact overall length of 66 mm, the tool is well suited for tight spaces commonly encountered in sheet metal and body panel work. Intended users and typical applications This Twist Drill by MetavCUT is aimed at professionals and workshops working on metal fabrication, automotive body repairs and general metal maintenance. It is optimised for use with standard drilling machines and hand-held drills when appropriate fixturing and coolant are used. The combination of toughness and precision makes it a reliable choice for repetitive tasks where hole quality and repeatability are required. Handling recommendations and productivity advantages The ground HSS‑G geometry allows drilling up to 40% faster with 50% less thrust compared to conventional HSS variants under comparable conditions, which reduces operator fatigue and machine load. For best results, employ suitable cutting fluid and moderate speeds when machining harder alloys. Be aware that ground HSS can be more brittle than rolled types, so clamping and moderate feed rates help prevent breakage and extend tool life. Strong recommendation: For professional metalworking needs, choose the MetavCUT Body Drill — contact METAV Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or by phone +49 2822 7131930, WhatsApp +49 170 2837271 for immediate support. Bezeichnung: Body Drill (Karosseriebohrer) Marke: MetavCUT SKU: 58060-FDA Durchmesser: 6 mm Spiral Length: 16 mm Gesamtlänge: 66 mm Spitzenwinkel: 135° Ausführung: double sided Schaft Ausführung: fully ground Farbe: bright finished Material: HSS-G Anwendung: Drills for metal Modellserie: Standard Line Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill primarily used for and which materials suit it best? The MetavCUT Body Drill Twist Drill is used mainly for machining high‑strength materials and larger drill diameters; it performs well in alloyed and unalloyed steel, cast steels, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. Its ground geometry and 135° tip give good centring and clean holes in demanding metal applications. Which three drill types are commonly distinguished? Three common drill types are Metal Drills, Wood Drills and Stone/Concrete Drills. The MetavCUT Body Drill belongs to the Metal Drill category and is optimised for professional metalworking tasks.
Precise, durable drilling for sheet-metal and vehicle bodywork
The HSS-G double-ended body drill is a purpose-built cutting tool for sheet-metal work, vehicle body repairs and assembly tasks. Also described as a double-ended HSS body drill or reversible sheet-metal drill, this ground, uncoated tool features a 135° split point with a cross grind that gives reliable self-centring on painted or curved panels.
Why this design improves productivity and reduces rework
The drill’s reversible concept provides two fully formed cutting ends and flute runs, so once one tip reaches its wear limit the operator can simply reverse the tool in the chuck. The stubbier geometry increases stiffness and fracture resistance, making the HSS-G double-ended body drill especially suited to handheld drilling and to drilling through thin panels or removing blind rivets without the tendency to hook or snap. The polished, uncoated surface reduces chip welding when machining aluminium alloys, soft sheet materials and certain plastics.
Tangible advantages that matter on the shop floor
- Doubled service life through reversible double-ended construction.
- Improved stability and reduced breakage thanks to short, stiff geometry.
- Reliable self-centring with 135° split point and cross grind — less need for centre punching.
- Lower feed force and reduced tendency to wander on lacquered or curved surfaces.
- Polished, uncoated finish to minimise chip adhesion on aluminium and plastics.
Metav: the smart source for precision workshop tooling
Metav combines decades of expertise with a broad, quality-filtered assortment from its Emmerich hub. With over 48,000 customers and more than 250,000 products, Metav supplies consistent availability and a focused selection for industry and trade. Choose Metav as a pragmatic partner when reliability, choice and fast, informed supply are priorities for the workshop.
key technical data
- Material: HSS-G (high-speed steel), precision ground
- Coating/finish: uncoated, polished surface
- Point geometry: 135° split point with cross grind (self-centring)
- Construction: double-ended, both ends fully usable
- Geometry: short, compact/stubby for high stiffness
- Typical applications: sheet metal, vehicle bodywork, blind rivet removal, aluminium alloys, plastics
FAQ
How does the double-ended design affect tool life?
The double-ended design effectively doubles usable life by providing two cutting tips and flute runs; when one end wears, the drill is reversed in the chuck to restore full cutting performance.
Can this drill be used with handheld machines?
Yes. The short, rigid geometry of the double-ended HSS body drill reduces vibration and the risk of catching, making it well suited to handheld drilling in thin panels and bodywork.
Does the 135° split point really eliminate the need for centre punching?
In many cases the 135° split point with cross grind provides reliable self-centring on smooth or curved panels, significantly reducing the need for centre punching and lowering required feed force.
Which materials is the reversible sheet-metal drill suitable for?
The drill is specified for sheet-metal work, vehicle body panels, aluminium alloys and certain plastics; the polished, uncoated finish helps prevent chip adhesion on softer materials.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com