Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT 060202 UM 1125 Indexable Insert - Sandvik
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product features for indexable inserts CCGT 060202 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060202UM1125-SANDVIK Data/ Figures: ISO-Code: CCGT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: 1125 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCGT-060202-1125-Sandvik 40END
CCGT 060202 UM 1515 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Technical data indexable inserts CCGT 060202 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060202UM1515-SANDVIK ISO-Code: CCGT060202 Grade: 1515 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.2 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCGT-060202-1515-Sandvik 40END
CCGT 060204 -UM 1205 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts CCGT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060204-UM1205-SANDVIK ISO-Code: CCGT060204 Grade: 1205 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: -UM Chip Breaker: single-sided Manufacturer: Registered trademarks and trade names are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCGT-060204-1205-Sandvik 40END
CCGT 060204 AH725 Wendeplatten - Tungaloy
Combining the PVD-coated AH725 grade with a rhombic ISO geometry delivers consistent chip control and robust performance in mixed-steel turning operations; the 0.4 mm corner radius and secure countersunk hole ensure repeatable seating and stable cutting. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific recommendations. CCGT 060204 AH725 — ISO rhombic indexable insert for Turning by Tungaloy The CCGT060204 AH725 is an ISO-standard rhombic turning insert engineered for external and internal turning, offering process security and versatile performance across a range of steels and stainless steels. PVD-coated carbide grade AH725 for steels Universal, chip-resistant grade for mixed materials Rhombic insert CCGT060204 with 0.4 mm corner radius Countersunk hole and 7° clearance for secure clamping Reliable chip control and process security for turning operations The insert’s PVD layer on a carbide substrate provides improved wear resistance and consistent cutting-edge stability, which supports longer tool life and predictable tool-change intervals. The single-sided chipbreaker geometry focuses chip formation for conventional turning tasks, reducing the risk of built-up edge and enabling steady material removal rates. These technical characteristics translate into fewer interruptions and more reproducible cycle times on the shop floor. Seamless ISO compatibility and secure clamping for stable cuts Designed to the ISO plate designation, the rhombic geometry fits standard external holders and boring bars when matched for form, free angle, tolerance class, fastening and thickness. The countersunk hole with a cylindrical bore and one-sided countersink (40°–60°) ensures a positive seating and minimises micro-movement under load. With a defined 7° clearance and a plate thickness of 2.38 mm, the insert integrates into existing tool systems with minimal adjustment, simplifying setup and reducing downtime. Versatile material applications and predictable performance The grade AH725 is a universal, fracture-resistant choice tailored for machining steel and stainless steels, particularly where workpieces vary or where smaller tools demand high process reliability. The moderate corner radius of 0.4 mm balances edge strength and fine contouring, making the insert suitable for finishing and medium turning operations. For users less familiar with grades and coatings, AH725 provides a pragmatic compromise between wear resistance and toughness, so fewer grade changes are needed across mixed batches. Operational advantages and workshop handling A compact plate size (06) and the ISO rhombic form support flexible tool paths in confined setups and internal turning. The insert’s PVD coating reduces friction at the contact zone, which helps lower cutting temperatures and enhances surface quality. In practice, this means longer intervals between index changes and more consistent surface finish, improving part-to-part uniformity. Spare screws, shims and compatible clamping sets are the recommended system complements to maintain the assembly’s repeatability. For application guidance or to secure a supply of Tungaloy AH725 inserts, contact Metav Werkzeuge for tailored recommendations and ordering assistance at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge supports selection and system advice for reliable machining results. Technical Data Article number: 6857024 Manufacturer SKU: TUN6857024 SKU: 6857024-Tungaloy Manufacturer: Tungaloy Core data Designation: CCGT060204 Size: 06 Corner radius: 0.4 mm Plate thickness: 2.38 mm Clearance angle: 7° Included hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Insert angle: 80° Special features PVD-coated carbide (AH725) Rhombic plate form Single-sided chipbreaker ISO-standard turning insert Recommended for steel and stainless steels Suitable for external and internal turning Compatibility determined by form, free angle, tolerance class, fastening, size and thickness System components: outer holder or boring bar, shim/clamping set, spare screws FAQ What materials is this insert suitable for? The CCGT060204 AH725 insert is specified for machining steel and stainless steels; the AH725 grade offers fracture resistance across mixed materials. How is the insert clamped and secured? The insert uses a cylindrical hole with a one-sided countersink (40°–60°) for positive seating; the 7° clearance and ISO rhombic geometry ensure secure clamping in compatible holders. Which operations are recommended with this insert? Designed for external and internal turning, the plate performs well in finishing and medium turning where process stability and consistent chip control are required. How does the AH725 coating affect performance? The PVD coating on the AH725 grade reduces friction and improves wear resistance, contributing to longer edge life and steadier surface quality during machining. What tolerance considerations are important for compatibility? Compatibility depends on matching form, free angle, tolerance class, fastening method, size and thickness with the chosen holder or boring bar; verify these parameters before assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 GH110 Wendeplatten - Tungaloy
Taking advantage of the combination of GH110 grade durability, ISO compatibility and precise geometry ensures consistent chip control and long tool life; order directly via Metav Werkzeuge or consult our specialists for application support. CCGT 060204 GH110 CCGT060204 turning insert, 7° relief — Tungaloy CCGT060204 GH110 Tungaloy insert for precision turning in ISO-standard tool systems, designed for reliable external and internal machining. ISO rhombic insert, 7° relief angle GH110 grade for balanced wear and toughness Cylindrical hole with 40°–60° countersink One-sided chipbreaker for controlled chips Consistent performance from a balanced cutting grade The combination of the GH110 cutting grade and carbide substrate delivers a well-balanced mix of wear resistance, toughness and edge stability, making the insert suitable for a wide range of turning tasks. As an ISO-compliant component, the cutting plate integrates into standard toolholder systems where form, relief angle, tolerance class, clamping and thickness determine fit. This balance reduces unexpected tool changes and contributes to stable cycle times on the shop floor. Geometry engineered for secure clamping and precise cuts The rhombic form with an included angle of 80°, a 0.4 mm corner radius and a 7° relief angle is optimised for accurate contouring and repeatable edge contact. The plate thickness of 2.38 mm and the cylindrical hole with one-sided countersink (40°–60°) enable secure clamping with compatible holders and shims, while the one-sided chipbreaker supports reliable chip evacuation. These geometric features lower the risk of vibration, improve surface finish and simplify changeover when replacement inserts are required. Practical benefits for turning operations and productivity Designed for both external and internal turning, the insert helps maintain machining quality across diverse setups by focusing on predictable chip behaviour and stable cutting edges. Selecting the appropriate chipbreaker and the GH110 grade relative to workpiece material and operation type improves tool life and process reliability, supporting higher productivity. For complex or mixed-material jobs, the modular system of insert, holder, shim and replacement fastening parts gives flexibility and reduces downtime. Contact Metav Werkzeuge for tailored advice on using the Tungaloy GH110 grade and to check availability for immediate application support Technical data Article number: 6801294 SKU: 6801294-Tungaloy Manufacturer SKU: TUN6801294 Series: ISO turning inserts Designation: CCGT060204 GH110 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Thickness: 2.38 mm Relief angle: 7° Included angle: 80° Size: 06 Special features Rhombic form Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker Tungaloy grade GH110 For external and internal turning Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ Which turning operations suit this insert best? This insert is intended for external and internal turning; the CCGT060204 GH110 Tungaloy grade performs well where a balance of wear resistance and edge toughness is required. How does the GH110 grade affect performance? The GH110 grade provides a balanced combination of wear resistance and toughness, so the Tungaloy insert sustains cutting-edge stability under varied turning conditions. What does the hole and countersink design mean for clamping? The cylindrical hole with one-sided countersink (40°–60°) enables secure clamping in compatible ISO holders and helps maintain correct seating of the CCGT060204 insert during machining. Can the insert be used for finishing passes with a 0.4 mm radius? Yes, the 0.4 mm corner radius is suitable for light finishing and profile turning where a small-radius contour is required, delivering improved surface quality and dimensional control. How should the chipbreaker be chosen for different materials? Select the chipbreaker and the GH110 grade according to the workpiece material, cutting parameters and stability of the setup; the one-sided chipbreaker on this insert promotes controlled chips under many turning scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 GH330 Wendeplatten - Tungaloy
Benefit from the combination of wear-resistant GH330 grade, ISO compatibility and a 0.4 mm corner radius for consistent turning quality and longer tool life; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific guidance. CCGT 060204 GH330 — Indexable turning insert by Tungaloy (rhombic, 0.4 mm radius, single-sided chipbreaker) A CCGT060204 GH330 indexable turning insert designed for general turning operations in ISO-compatible holders, combining a robust carbide grade with chip-control geometry for repeatable results. Rhombic ISO insert CCGT 060204 0.4 mm corner radius GH330 carbide grade Single-sided chipbreaker, 7° relief Productive, predictable cutting performance for turning operations The combination of the GH330 carbide grade and a defined chipbreaker geometry delivers high abrasion resistance alongside reliable edge stability. As an ISO-standard indexable insert, the plate permits consistent interchangeability in production environments, reducing setup variation. The modest 0.4 mm corner radius supports stable engagement in finishing and light-medium roughing passes, while the grade's balance between hardness and toughness helps maintain a sharp cutting edge over extended cycles. This directly translates into fewer tool changes and improved machining throughput. Designed for straightforward integration into ISO holder systems The rhombic plate form and standardised dimensions ensure compatibility with a wide range of external holders and boring bars when form, relief, tolerance class, fastening and thickness match. The 7° relief angle and cylindrical hole with single-sided countersink (40°–60°) provide secure clamping and repeatable seating, which is critical for precision turning. With a 2.38 mm plate thickness and the specified geometry, the insert supports stable clamping forces and minimal vibration, contributing to consistent surface finish and dimensional control. Chip control and surface quality optimised for turning The single-sided chipbreaker is tailored to support effective chip formation and evacuation in many turning scenarios; the actual chip behaviour should be matched to the workpiece material and cutting parameters. The carbide composition enhances thermal stability, allowing reliable performance under moderate cutting temperatures. Where surface integrity is critical, the controlled edge geometry and robust grade help maintain a fine finish across repeated operations, reducing the need for secondary processes. Operational advantages and inventory clarity Standardisation to the ISO form simplifies inventory management and reduces the variety of inserts required for workshop operations. The defined dimensions and ISO compatibility allow for predictable tool life calculations, which assists in process planning and cost control. The insert's stable cutting edge and proven grade reduce unexpected downtime and support reproducible results across batches, improving overall process reliability. For application-specific advice or to secure supply of the Tungaloy GH330 insert, contact Metav Werkzeuge for rapid technical consultation and procurement — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6801295 Manufacturer SKU: TUN6801295 SKU: 6801295-Tungaloy Designation: CCGT060204 GH330 Tungaloy insert Type: CCGT indexable insert Material: Carbide Plate form: rhombic Size: 06 Plate thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Key Dimensions Size designation: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Relief: 7° Included angle: 80° Radius (rε): 0.4 mm Features ISO-standard indexable rhombic insert Single-sided chipbreaker for controlled chips GH330 carbide grade for wear resistance and edge stability Cylindrical hole + single-sided countersink (40°–60°) Compatible with ISO holders depending on form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert suitable for? The CCGT060204 GH330 insert is intended for turning applications; the GH330 grade offers a balance of wear resistance and toughness suitable for a range of common turning materials when the chipbreaker and cutting data are selected appropriately. How is the insert secured in the holder? The insert features a cylindrical hole with a single-sided countersink (40°–60°) for standard clamping systems; correct seating and torque according to the holder specification ensure repeatable positioning and stability. Can this insert be used for internal and external turning? Yes, the rhombic form and geometry support both external and selected internal turning applications when used with a compatible external holder or boring bar matched to the insert dimensions. What are the key dimensions to check for compatibility? Important dimensions include the size designation 06, plate thickness 2.38 mm, corner radius 0.4 mm and the 7° relief; verify these against the holder’s accepted insert forms and tolerance class. How does the GH330 grade influence tool life? The GH330 carbide grade combines hardness and toughness to provide stable cutting-edge behaviour and improved resistance to abrasive wear, which typically results in longer usable life under suitable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 GH330 Wendeplatten - Tungaloy
High process reliability from ISO geometry and the wear‑resistant GH330 grade ensures stable cutting performance, while the rhombic form with a 0.4 mm corner radius delivers precise profiling in turning operations; order original inserts directly via Metav Werkzeuge or request application advice from our consultants. CCGT060204 GH330 – Rhombic turning insert for turning, Tungaloy, 0.4 mm corner radius The CCGT060204 GH330 is an ISO‑standard rhombic indexable insert intended for external and internal turning, combining a wear‑resistant Tungaloy grade with robust geometry for consistent machining performance. ISO rhombic insert CCGT060204 GH330 grade for wear resistance 0.4 mm corner radius for fine profiling Cylindrical hole with 40°–60° countersink Consistent chip control for predictable productivity The insert’s single-sided chipbreaker design supports reliable chip formation during moderate to heavy cuts, reducing interruptions and machine downtime. Paired with the ISO rhombic geometry, this configuration delivers repeatable chip flow, which is particularly useful in longer production runs where consistent cycle times matter. The combination of geometry and chipbreaker reduces the need for manual chip handling and contributes to improved overall process efficiency. Edge stability and extended wear life through material choice Produced in a Tungaloy grade, GH330 balances wear resistance with toughness to maintain a stable cutting edge under varying cutting conditions. The substrate of cemented carbide provides thermal stability and strength at elevated cutting temperatures, while the grade formulation improves resistance to abrasive wear. As a result, tool life is lengthened and insert changes become less frequent, improving throughput and lowering tooling costs per component. Precision fit and secure clamping for reliable indexing Compatibility with the holder is determined by form, relief angle, tolerance class, clamping method, size and thickness. The insert features a cylindrical hole with a one‑sided countersink (40°–60°) for positive seating and repeatable positioning in standard ISO pockets. The 7° relief angle and 2.38 mm thickness provide a stable mounting platform that minimises vibration and preserves dimensional accuracy across indexings, which supports high‑quality surface finishes and reduced scrap rates. Practical benefits for everyday turning operations The rhombic shape and 0.4 mm corner radius enable accurate profile turning and small radius work without sacrificing edge stability. The insert is suitable for both external and internal operations when paired with the appropriate holder or boring bar. Selection of the GH330 grade and the single-sided chipbreaker should be matched to workpiece material and machining stability to achieve the best balance of surface finish and tool life. Where higher toughness or different chip control is needed, alternate chipbreaker styles and grades can be chosen within the same ISO series. Contact Metav Werkzeuge for tailored application advice and to obtain original Tungaloy CCGT060204 GH330 inserts for dependable turning performance Technical data Article number: 6801301 Manufacturer SKU: TUN6801301 SKU: 6801301-Tungaloy Designation: CCGT060204 GH330 Tungaloy insert Manufacturer: Tungaloy Material: cemented carbide Model series: ISO turning indexable inserts Application: Turning Core specifications Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Plate thickness: 2.38 mm Plate size: 06 ISO code: 060204 Special features Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) GH330 Tungaloy grade for wear resistance and edge stability Compatible system: ISO insert, outer holder or boring bar, shim/clamp set and screws Intended for external and internal turning operations FAQ What turning operations is this insert best suited for? The CCGT060204 GH330 insert is designed for both external and internal turning where a rhombic geometry and a 0.4 mm corner radius are required; it performs well in general turning tasks with appropriate holder selection. Which materials can be machined with this grade? The GH330 Tungaloy grade offers broad applicability; when combined with the rhombic geometry and single‑sided chipbreaker, it is suitable for a wide range of steels and common industrial materials depending on cutting parameters. How is the insert secured in the holder? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for positive seating and repeatable clamping; the 7° relief angle and 2.38 mm thickness ensure a stable, vibration‑resistant mount. Can the corner radius be used for fine profiling? Yes, the 0.4 mm corner radius allows for precise profile turning and small radius features while maintaining edge stability under standard cutting conditions. What is included in the ISO insert system? A compatible system typically comprises the ISO indexable insert, a suitable outer holder or boring bar, an underlay/clamp set and replacement screws to ensure correct seating and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of coated cermet wear resistance, ISO compatibility and a compact rhombic form for consistent finishing results and longer tool life; order original Tungaloy inserts via Metav Werkzeuge or consult our specialists for the optimal chipbreaker and holder pairing. CCGT 060204 GT9530 indexable turning insert — Tungaloy, coated cermet for finishing The CCGT060204 GT9530 is an ISO-standard rhombic insert designed for external and internal turning where a high-quality surface and extended tool life under stable conditions are required. Coated cermet grade GT9530 ISO-standard indexable insert 0.4 mm corner radius for fine finish One-sided chipbreaker, rhombic 80° Consistent, high-quality surface finish for steel turning The CCGT060204 GT9530 is engineered as a coated cermet solution to deliver a wear-resistant finishing performance on steel when machining conditions are stable. The combination of the GT9530 grade and the small 0.4 mm corner radius supports a fine surface texture while reducing the tendency to form built-up edge. For precision finishing, the material and grade are selected to balance surface quality with predictable tool wear, making this insert suitable where finish and repeatability are priorities without excessive process complexity. Longer tool life and predictable productivity gains In production environments where consistency matters, the coated cermet composition provides a measurable improvement in tool life compared with uncoated grades in comparable finishing tasks. The stable machining characteristics of the grade reduce unexpected downtime and make cost-effectiveness easier to plan for; over continuous runs the result is fewer indexings and less tool change time. These benefits translate into a leaner workflow and a clear rational case for choosing a dedicated finishing-grade insert in serial turning operations. Straightforward compatibility and secure clamping for repeatable results The insert is produced to an ISO-standard geometry and is rhombic with an included angle of 80°, allowing compatibility with a wide range of external holders and boring bars. Key mounting parameters are defined by form, clearance and tolerance class, fastening method, size and thickness; the item features a cylindrical hole with single-side countersink (40°–60°) to suit common clamping systems. With a 7° clearance angle and 2.38 mm thickness, the insert is intended to be used within a system comprising an insert, suitable holder, shim or clamp set and replacement fasteners that match the ISO interface for reliable repeatability. Practical application guidance for shopfloor decision-making This grade is optimised for external and internal turning on steel where finishing to light general-purpose machining is needed. The one-sided chipbreaker is tailored to provide controlled chip formation when workpiece rigidity and machine stability are adequate; choose the chipbreaker and grade according to material, machining type and fixture stability. In practice, the insert performs best when feed and speed are set to favour a finishing pass rather than aggressive roughing, and when coolant or cutting conditions are stabilised to exploit the longer tool life potential of the cermet coating. For tailored recommendations and to secure authentic Tungaloy CCGT inserts for your turning applications, contact Metav Werkzeuge — our consultants will advise on the correct chipbreaker and holder combination and can supply the matching items directly. Technical data Article number: 6997863 SKU: 6997863-Tungaloy Manufacturer SKU: TUN6997863 Model series: ISO turning indexable inserts Material: cemented carbide Numbers / Core technical data Included angle: 80° Corner radius: 0.4 mm Clearance angle: 7° Thickness: 2.38 mm Size designation: 06 Designs / Special features Coated cermet grade GT9530 Rhombic plate form (CCGT) One-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) ISO-standard indexable geometry Application: external and internal turning on steel FAQ What materials is this insert best suited for? The GT9530 cermet grade is optimised for machining steel in finishing to light universal operations; select the grade and chipbreaker according to the exact steel alloy and stability of the setup. How is the insert mounted and what should be checked for compatibility? Compatibility is determined by the insert form, clearance angle, tolerance class, fastening method, size and thickness; the CCGT060204 requires a matching rhombic holder and appropriate shim/clamp and screw for secure clamping. What advantages does the GT9530 coating offer? The coated cermet composition of GT9530 provides improved wear resistance and a more consistent surface finish with extended tool life in stable finishing applications. Can this insert be used for roughing operations? This insert is designed for finishing to light general-purpose turning; for heavy roughing, a more robust insert geometry and different grade would be recommended. Which chipbreaker is fitted and what does it mean for chip control? The insert features a one-sided chipbreaker, which is intended to produce controlled chips under stable cutting conditions; proper selection of feed and speed enhances chip evacuation and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 H13A Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Design details indexable inserts CCGT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060204UMH13A-SANDVIK Facts & Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: H13A with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCGT-060204-H13A-Sandvik 40END
CCGT 060204 IC20 Indexable Insert - ISCAR
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics insert CCGT 060204 from ISCAR Brand: ISCAR Manufacturer Order Number: CCGT060204-ASIC20 Facts for the tool: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING ALUMINUM Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-CCGT-060204-IC20-ISCAR 40END
CCGT 060204 IC30N Indexable Insert - ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Information on technical features CCGT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCGT060204LIC30N Facts & Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC30N with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING CERMET Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-CCGT-060204-IC30N-ISCAR 40END
CCGT 060204 IC520 Indexable Insert - ISCAR
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Specifications for CCGT 060204 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: CCGT060204-ASIC520 Dataand Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: IC520 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Series: TURNING ALUMINUM Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-CCGT-060204-IC520-ISCAR 40END
CCGT 060204 Indexable Insert for Aluminium - MetavCUT
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts CCGT 060204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204SKC-Aluminium Figures for the tool: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Aluminium-MetavCUT 40END
CCGT 060204 Indexable Insert for Aluminium - MetavCUT
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details CCGT 060204 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204SM-Aluminium ISO-Code: CCGT060204 Usage for: Aluminium Material: cemented carbide Form: rhombic Usable to the work on: Aluminium Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Aluminium-MetavCUT 40END
CCGT 060204 Indexable Insert for Aluminium - MetavCUT
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product features for indexable inserts CCGT 060204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204SN-Aluminium Facts for the tool: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Aluminium-MetavCUT 40END
CCGT 060204 Indexable Insert for Aluminium - MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data CCGT 060204 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204ST-Aluminium Facts for the tool: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Aluminium-MetavCUT 40END
CCGT 060204 Indexable Insert for Aluminium - MetavCUT
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts CCGT 060204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204-Aluminium ISO-Code: CCGT060204 Usage for: Aluminium Material: cemented carbide Form: rhombic Usable to the work on: Aluminium Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Aluminium-MetavCUT 40END
CCGT 060204 Indexable Insert for Brass - MetavCUT
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Specifications CCGT 060204 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204SKC-Brass Figures for the tool: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Usage for: Brass with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Brass-MetavCUT 40END
CCGT 060204 Indexable Insert for Brass - MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features CCGT 060204 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204SM-Brass Facts for the tool: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Usage for: Brass with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Brass-MetavCUT 40END
CCGT 060204 Indexable Insert for Brass - MetavCUT
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product characteristics for inserts CCGT 060204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204SN-Brass Facts for the tool: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Usage for: Brass with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Brass-MetavCUT 40END
CCGT 060204 Indexable Insert for Brass - MetavCUT
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features CCGT 060204 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204ST-Brass Facts and Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Usage for: Brass with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Brass-MetavCUT 40END
CCGT 060204 Indexable Insert for Cast Iron - MetavCUT
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Detail specifications for insert CCGT 060204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204SKC-CastIron Figures for the tool: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Cast Iron-MetavCUT 40END
CCGT 060204 Indexable Insert for Cast Iron - MetavCUT
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for indexable inserts CCGT 060204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204SM-CastIron ISO-Code: CCGT060204 Usage for: Cast steel Material: cemented carbide Form: rhombic Usable to the work on: Cast Iron Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Cast Iron-MetavCUT 40END
CCGT 060204 Indexable Insert for Cast Iron - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Information on technical features CCGT 060204 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060204SN-CastIron Facts / Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060204-Cast Iron-MetavCUT 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com