Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT 060204 KCU25 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications for indexable inserts CCGT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT060204HP-KCU25-KENNAMETAL Data/ Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KCU25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGT-060204-KCU25-Kennametal 40END
CCGT 060204 KS05F Wendeplatten - Tungaloy
Benefit from the combination of ISO compatibility, the KS05F Tungaloy grade and reliable chip control for efficient turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. CCGT060204 KS05F CCGT ISO turning insert — Tungaloy A CCGT060204 KS05F indexable insert engineered for precision external and internal turning in ISO holders. ISO rhombic insert, 06 size KS05F grade for wear and toughness Single-sided chipbreaker for controlled chips Consistent performance for productive turning The KS05F Tungaloy grade combines balanced wear resistance and edge stability on a carbide substrate to maintain cutting performance over extended cycles. This balance reduces unplanned tool changes and supports stable surface quality in serial machining. The rhombic geometry and single-sided chipbreaker promote predictable chip formation, which simplifies chip handling and contributes to shorter process times and higher throughput in turning applications. Designed for secure fit and straightforward pairing with holders Compatibility with clamping systems is determined by the insert shape, 7° clearance, tolerance class, fastening method, size and thickness. The ISO designation indicates the intended seat and mounting form: CCGT060204 denotes a rhombic plate with an 80° included angle, a 0.4 mm radius and a 2.38 mm thickness, while the cylindrical hole with a one-sided countersink (40°–60°) enables firm, repeatable seating in compatible external holders or boring bars. Clear, standardised dimensions reduce setup uncertainty and make tool inventory management easier. Practical applications and system advantages Intended for both external and internal turning, the insert performs best when the chipbreaker and grade are matched to the workpiece material, machining method and machine stability. In practice, pairing this insert with a suitable external holder, a matching shim/clamp set and replacement screws completes a robust system that minimises vibrations and preserves the cutting edge. The rhombic form offers favourable cutting-edge strength for interrupted cuts, while the one-sided chipbreaker assists in consistent chip segmentation, reducing manual intervention and improving shop-floor ergonomics. For genuine Tungaloy CCGT060204 KS05F inserts and application advice, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks and to arrange supply through our technical sales team. Technical data Manufacturer article number: 6843406 SKU (manufacturer): TUN6843406 SKU: 6843406-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Application: Turning Facts Corner radius: 0.4 mm Included angle: 80° Clearance angle: 7° Thickness: 2.38 mm Size: 06 ISO code: 060204 Special features Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker Tungaloy grade KS05F ISO designation: CCGT060204 Intended use: external and internal turning FAQ Will this insert fit standard CCGT holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness; the CCGT060204 designation indicates the standard geometry to match common CCGT seats. Which materials suit the KS05F grade? The KS05F Tungaloy grade is formulated for a balanced combination of wear resistance and toughness, making the insert appropriate for a broad range of turning tasks when the chipbreaker and machining parameters are selected accordingly. How does the chipbreaker affect machining? The one-sided chipbreaker on this insert is designed to produce controlled chips and stable metal removal, which aids in tool life extension and consistent surface finish during turning. What additional parts are required to assemble a working tool system? A complete system typically comprises the ISO insert, a compatible external holder or boring bar, an underlay/shim and a clamp set with replacement screws to ensure secure and repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 KT325 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts CCGT 060204 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT06020411-KT325-KENNAMETAL Facts / Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: KT325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCGT-060204-KT325-Kennametal 40END
CCGT 060204 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the material field indicates "Hartmetall" (cemented carbide) while the grade information specifies an "uncoated cermet (NS9530)"; the conflicting material data prevents generation of a reliable product description, as the mismatch between the material type and grade classification raises concerns about the accuracy of the provided information, potentially leading to errors in interpretation, application, or manufacturing processes, which could result in compromised product quality, reduced performance, or even failure in critical applications, making it essential to resolve the discrepancy by verifying the source data, ensuring consistency across all fields, and confirming the correct material and grade combination before proceeding with further documentation or production steps.
CCGT 060204 NS9530 Wendeplatten - Tungaloy
Deliver consistent finishing on steel with the CCGT 060204 NS9530: an ISO‑compliant rhombic turning insert offering a 0.4 mm corner radius and a sharp, uncoated cermet grade for low cutting forces and excellent surface quality. Order directly via Metav Werkzeuge or consult the team for tailored application advice. CCGT 060204 NS9530 Turning insert (80°) – Tungaloy A CCGT 060204 NS9530 indexable turning insert designed for precision finishing of steel in continuous cuts and small depths of cut. Precision finishing cermet grade NS9530 ISO‑compliant rhombic insert 80° geometry 0.4 mm corner radius for fine surface finish Cylindrical hole with single‑side countersink Precision finishing for steel components The insert’s uncoated cermet grade NS9530 ensures a sharp cutting edge and reduced cutting forces, which directly improves surface integrity on machined parts. For external and internal turning operations, the combination of a fine 0.4 mm corner radius and the sharp grade is optimised for continuous cuts and small depths of cut, producing consistent Ra values and reducing secondary finishing. The use of an ISO‑standard insert guarantees a repeatable cutting geometry that supports process reliability and predictable tool life. Fast interchangeability and secure clamping for efficient production As an ISO turning insert, compatibility with a matching holder is determined by shape, relief angle, tolerance class, fastening and thickness. The 80° geometry and 7° relief angle provide stable support in the pocket, while the cylindrical hole with a one‑side countersink (40°–60°) ensures reliable clamping and simple replacement. This standardised system architecture—insert, external holder or boring bar, shim/clamp set and replacement screws—reduces set‑up time, simplifies spare‑parts management and helps maintain consistent cycle times on the shop floor. Application guidance and recommended use Engineered primarily for turning of steel, the finishing‑oriented NS9530 grade performs best where surface quality and low cutting forces are priorities. The single‑side chipbreaker is chosen to match the intended machining stability and material flow; select a chipbreaker and grade combination according to workpiece rigidity and feed range. The rhombic insert form (size 06, thickness 2.38 mm) offers access to confined profiles and internal features while the 80° approach angle balances cutting edge engagement and component geometry control, supporting productive, repeatable results. For specialist recommendations on tooling set‑up or to request application data for a specific workpiece, contact Metav Werkzeuge for expert advice and fast delivery. Technical data Article number: 6997911 Manufacturer SKU: TUN6997911 Model series: ISO turning indexable inserts Designation: CCGT060204 NS9530 Application: Turning Key measurements Geometry: 80° Relief angle: 7° Insert size: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Features and materials Cutting material: uncoated cermet, grade NS9530 Insert shape: rhombic Hole: with hole — cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: single‑side Typical use: external and internal turning FAQ What machining tasks is this insert best suited for? The NS9530 cermet grade is tuned for finishing operations on steel; the CCGT 060204 insert is best used for continuous cuts and small depths where high surface quality is required. How does the insert ensure fast replacement and consistent geometry? As an ISO‑compliant indexable insert, the CCGT 060204 is compatible with standard holders and employs a cylindrical hole with a single‑side countersink for reliable clamping and repeatable positioning. Is this insert suitable for internal turning in confined spaces? Yes; the rhombic shape and size 06 profile of the CCGT 060204 enable access to tighter internal geometries while keeping a stable cutting edge. Which workpiece materials should be avoided with this grade? The NS9530 finishing grade is optimised for steel; alternative grades are recommended for non‑ferrous metals, hardened steels or high‑temperature alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 NS9530 Wendeplatten - Tungaloy
Combining the sharp cutting edge of NS9530, the 80° rhombic geometry and the controlled chip formation of the single-sided breaker, this insert delivers superior surface quality and low cutting forces for finishing steel; order the CCGT060204 NS9530 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT 060204 NS9530 turning insert — rhombic 80° geometry, finishing grade by Tungaloy CCGT060204 NS9530 Tungaloy turning insert is an ISO-standard rhombic finishing insert designed for external and internal turning, optimised for continuous cuts and small depths of cut ISO-standard rhombic insert 80° geometry Uncoated cermet grade NS9530 for finishing Sharp cutting edge for low cutting forces Cylindrical hole with single-sided countersink Delivering consistent finishing performance for steel turning The uncoated cermet NS9530 is formulated for low cutting forces and a sharp cutting edge, which together reduce tool-induced vibration and improve surface quality on steel components. As a finishing grade, the material excels in continuous cuts and small depths of cut, producing consistently high surface finishes that reduce subsequent grinding or polishing steps. The practical outcome is higher first-pass yield and fewer rework cycles. Precision geometry that supports dependable productivity The 80° rhombic geometry and a 0.4 mm corner radius give the insert predictable contact conditions, while the 7° relief angle minimises rubbing and heat build-up. The insert’s 2.38 mm thickness and standardised ISO form ensure mechanical stability in a wide range of holders; the result is improved tool life and repeatable machining results. These measurable advantages translate directly into shorter cycle times and more reliable process windows on turning centres. Compatibility and secure clamping for straightforward setup Designed with a cylindrical hole and a single-sided countersink (40°–60°), the insert fits common ISO holders and clamping kits, enabling quick insert changes and secure fixation. The single-sided chipbreaker manages swarf in finishing operations, supporting stable chip flow without compromising the cleaned surface. If additional setup guidance is required, Metav Werkzeuge provides application advice to select the correct holder, clamping components and cutting parameters for each job. Why this choice supports manufacturing goals Selecting this finishing insert means choosing a solution that balances surface quality and cutting efficiency. The combination of cermet cutting material and rhombic geometry is particularly effective where fine finishes and minimal cutting forces are priorities. For production environments focused on reproducibility and minimal post-processing, this turning insert contributes to predictable results and consistent part quality. Contact Metav Werkzeuge for application advice on the Tungaloy finishing insert or to discuss ordering the CCGT060204 NS9530; reach out at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6997902 SKU: 6997902-Tungaloy Manufacturer SKU: TUN6997902 Facts ISO designation: 060204 Size: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Insert angle: 80° Special features Shape: rhombic Material: carbide substrate with uncoated cermet grade NS9530 Chipbreaker: single-sided Hole: cylindrical hole with single-sided countersink (40°–60°) Application: finishing for steel, suitable for external and internal turning FAQ What materials is this insert suitable for? The CCGT060204 NS9530 Tungaloy turning insert is optimised for steel finishing applications and performs best in continuous cutting and small depths of cut. Which holder types are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening and size; the insert’s ISO form, 7° relief and cylindrical hole with countersink suit standard ISO clamping systems. How does the uncoated cermet grade affect surface finish? The NS9530 cermet provides a sharp cutting edge and low cutting forces, which together improve surface quality and reduce the need for downstream finishing. Is the insert suitable for internal as well as external turning? Yes, the insert is designed for both external and internal turning when the correct holder and clamping arrangement are used. What is the manufacturer SKU and article number for ordering? The article number is 6997902 and the SKU is 6997902-Tungaloy for the CCGT060204 NS9530 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of reliable edge stability, a tough coated cemented carbide grade and ISO compatibility for efficient turning operations; order directly via Metav Werkzeuge or consult our specialists for application support. CCGT 060204 SH7025 — Indexable turning insert (rhombic, 80°) by Tungaloy The CCGT060204 SH7025 is an ISO‑standard rhombic indexable insert intended for external and internal turning, designed for machines and toolholders that match its form, relief and fastening dimensions. Rhombic ISO insert, 80° cutting geometry Coated cemented carbide SH7025 grade Cylindrical hole with one‑side countersink Robust edge stability for variable conditions High cutting reliability for turning applications The rhombic geometry with an 80° cutting angle provides a balanced engagement between insert strength and access to external or internal contours, delivering reproducible results in interrupted and continuous cuts. Made from coated cemented carbide in grade SH7025, this insert emphasises edge stability under changing engagement conditions, which reduces the frequency of index changes and supports a steadier cycle time. For operations where small tools or variable entry angles are used, the combination of geometry and substrate pays off in consistent surface finish and tool life. Practical specifications that ensure fit and function Key dimensions are selected to match ISO toolholder standards while keeping setup straightforward: a corner radius of 0.4 mm, a relief angle of 7° and a plate thickness of 2.38 mm. The 0.4 mm radius reduces the risk of built‑up edge on fine turning passes and helps maintain dimensional accuracy at small depths of cut. The relief angle limits rubbing and heat generation at the flank, improving cutting stability when machining steels and alloyed materials. These measurable attributes support straightforward process parameter selection and predictable machining results. Secure clamping and chip control for efficient machining The insert features a cylindrical hole with a one‑side countersink (40°–60°), enabling reliable clamping in centre‑clamped or screw‑clamped holders and quick insert indexing. A single‑side chipbreaker improves chip control for conventional turning tasks, helping to avoid entanglement in long turning cycles and assisting in chip evacuation from the cutting zone. Together, these aspects reduce process interruptions and contribute to safer, more productive turning operations on turning centres and lathes. Material suitability and process advantages The substrate and coating combination of grade SH7025 is engineered for toughness and cutting edge security, making it appropriate where variable engagement and smaller tool bodies are common. This insert performs well across typical turning tasks such as finishing and medium‑duty roughing of steels and alloyed materials; the robust design helps to minimise edge chipping and extend usable life. Because the insert follows ISO norms, compatibility with a wide range of holders and tool systems is simplified, allowing rapid integration into existing tool inventories. Contact Metav Werkzeuge for tailored advice on using Tungaloy SH7025 indexable inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6967404 SKU: 6967404-Tungaloy Manufacturer SKU: TUN6967404 Material: cemented carbide Model series: ISO-Drehwendeschneidplatten Designation: CCGT060204 SH7025 Numbers Cutting angle: 80° Corner radius: 0.4 mm Relief angle: 7° Thickness: 2.38 mm Size: 06 Special features Coated cemented carbide, grade SH7025 Single‑side chipbreaker Rhombic plate form Cylindrical hole with one‑side countersink (40°–60°) Suitable for external and internal turning FAQ What materials is this insert suited to machine? The SH7025 grade insert is designed for turning of steels and a broad range of alloyed materials; its toughness and edge stability make it suitable for variable engagement conditions. How does the insert clamp in the holder? Clamping is achieved via the central cylindrical hole with a one‑side countersink (40°–60°), which ensures secure seating and compatibility with standard ISO toolholders. What advantage does the 0.4 mm corner radius bring? A 0.4 mm radius reduces the risk of chipping during fine finishes and helps maintain dimensional accuracy on narrow cuts. Is the geometry compatible with ISO tool systems? Yes, the insert follows ISO‑standard dimensions and fits holders that match the plate form, size, thickness and relief specifications. Can this insert be used for internal turning as well as external? The rhombic 80° geometry and compact dimensions make it suitable for both external and internal turning tasks where access and insert strength are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH7025 for sustained cutting-edge stability and the rhombic ISO 060204 form for versatile turning performance; order the insert directly via Metav Werkzeuge or consult our team for selection support. CCGT 060204 SH7025 Tungaloy indexable turning insert for turning The CCGT060204 SH7025 is an ISO-standard rhombic indexable insert for external and internal turning, engineered for stable cutting-edge performance in changing engagement conditions. Coated carbide grade SH7025 Rhombic ISO 06 form, 80° included angle 0.4 mm corner radius, 7° clearance angle Cylindrical hole with one-sided countersink Maximised process stability and longer edge life The combination of a coated carbide substrate and the SH7025 grade delivers enhanced toughness and reliable edge integrity, especially where engagement depth varies. The composition is optimised for turning tasks that demand resistance to chipping while retaining wear resistance. With a 0.4 mm corner radius and an effective chipbreaker, the insert supports repeatable surface quality and predictable tool life, reducing unplanned downtime and improving cycle consistency in production environments. Precise fit and simple integration into turning systems Compatibility with toolholders is governed by form, clearance angle (7°), tolerance class, clamping method, size and thickness; the rhombic ISO 060204 geometry ensures broad holder availability. The cylindrical hole with a one-sided countersink (40°–60°) enables secure clamping and straightforward indexing, promoting quick insert changes and repeatable positioning. The plate thickness of 2.38 mm contributes to stiffness in small holders, making it suitable for both external and internal turning operations. Application guidance for efficient machining The single-sided chipbreaker design is intended for general-purpose turning; select the breaker and grade to match workpiece material and machining stability. The insert is particularly effective where smaller tools or variable engagement require a tough, edge-stable grade rather than the hardest substrate. The ISO-format indexable design simplifies inventory management — the same ISO 060204 designation fits a wide range of holders — and replacement screws or clamping sets provide straightforward serviceability during scheduled maintenance. For tailored selection of Tungaloy turning inserts and prompt supply, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best grade and chipbreaker for the intended application Technical data Article number: 6967370 Manufacturer SKU: TUN6967370 Product SKU: 6967370-Tungaloy Model series: ISO indexable turning inserts Facts Size designation: 06 ISO code: 060204 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Materials & features Coated carbide grade SH7025 Rhombic plate form (CCGT) One-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Suitable for external and internal turning Compatibility determined by form, clearance, tolerance, clamping, size and thickness FAQ What materials is this insert designed to machine? The SH7025-coated carbide formulation is designed as a tough, edge-stable grade suitable for a broad range of steels and mixed materials; choose the specific chipbreaker and cutting data according to the workpiece. How does the CCGT060204 fit into existing toolholder systems? The insert follows the ISO 060204 designation, so compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness to ensure correct seating and secure clamping. What is the benefit of the one-sided chipbreaker? A one-sided chipbreaker offers controlled chip formation for many turning operations, balancing chip control with strength at the cutting edge to reduce edge chipping under variable engagement. Is the insert suitable for internal turning as well as external turning? Yes; the rhombic geometry and the plate dimensions make the insert suitable for both external and internal turning, provided the chosen holder and overhang meet the rigidity requirements. Which features improve repeatability when indexing a new edge? The ISO form, the cylindrical hole with countersink and the standardised thickness and tolerance classes provide consistent seating and clamping, supporting rapid, repeatable indexing and minimised re‑set times. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH725 grade, precise 80° rhombic geometry with a 0.4 mm corner radius, and a secure cylindrical hole with 40°–60° countersink to achieve stable chip control and repeatable edge life in turning operations; order the insert from Metav Werkzeuge or consult their application specialists for holder and clamping recommendations. CCGT060204 SH725 CCGT Rhombic Turning Insert for Turning by Tungaloy — 80° geometry, 0.4 mm radius CCGT060204 SH725 is an ISO‑standard rhombic turning insert designed for robust performance in external and internal turning, optimised for small tools and varying engagement conditions. Coated carbide grade SH725 Rhombic 80° geometry, 0.4 mm corner radius Cylindrical hole with 40°–60° countersink Single-sided chipbreaker for controlled chips Consistent edge stability for productive turning The coated carbide composition and the SH725 grade provide a combination of toughness and edge stability that suits demanding turning tasks and variable cutting conditions. This makes the insert particularly effective where small‑tool setups or frequent changes in depth of cut occur. The rhombic 80° geometry supports positive cutting action and good access to workpiece contours, while the 0.4 mm corner radius balances cutting edge strength with surface finish requirements. These design choices reduce the frequency of index changes and contribute to a smoother production flow. Straightforward mounting and ISO compatibility Compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the insert’s ISO‑standard dimensions ensure easy selection of matching holders. The cylindrical hole with single‑sided countersink (40°–60°) delivers secure clamping and repeatable positioning in a wide range of ISO holders and boring bars. A complete system comprises the ISO insert, a corresponding external holder or boring bar, a clamping pad/kit and replacement screws — allowing quick integration into existing tool setups and minimising downtime during tool changes. Controlled chip formation and application scope The single‑sided chipbreaker is tuned for reliable chip control in standard turning operations, helping to avoid entanglement and facilitating safe chip evacuation. Typical applications include both external and internal turning where reproducible chip shape and stable cutting edges matter. The insert’s coated carbide nature improves wear resistance on medium‑duty cuts, while the SH725 composition is selected for its toughness and resistance to edge chipping, which is beneficial when engagement conditions change during interrupted cuts. Practical selection and support for production Selection of chipbreaker type and grade should match the workpiece material, machining strategy and machine stability; the provided data indicate the insert is prepared for versatile turning tasks rather than a single specialised niche. For machining teams requiring guidance on choosing the correct holder, clamping set or feed and speed recommendations, professional consultation is available. Technical queries and compatibility checks can be addressed quickly to ensure the insert integrates with existing toolholders and clamping hardware. Contact Metav Werkzeuge for application advice, availability of the Tungaloy CCGT060204 SH725 insert and recommended holders; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6737129 Manufacturer SKU: TUN6737129 SKU: 6737129-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: CCGT060204 SH725 Tungaloy‑Wendeplatte Core figures Corner radius: 0.4 mm Geometry angle: 80° Relief (free) angle: 7° Thickness: 2.38 mm Insert size: 06 Mounting: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Features & application Coated carbide grade SH725 Rhombic insert form (CCGT) Single‑sided chipbreaker Intended use: Turning (external and internal) Compatibility: ISO holders, clamping pad/kit and replacement screws Suited to small tools and varying engagement conditions FAQ What applications is this insert best suited for? The Tungaloy CCGT060204 SH725 insert is intended primarily for external and internal turning where a balance of edge stability and toughness is required. How is the insert secured in the holder? The insert is held via a cylindrical hole with a single‑sided countersink (40°–60°); this design provides secure clamping and repeatable positioning in ISO holders. Which holder and clamping components are needed? A matching ISO external holder or boring bar, a clamping pad/kit and replacement screws complete the system; compatibility depends on form, relief angle, tolerance and insert thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH725 edge stability and ISO‑standard compatibility for reliable turning operations; order the insert directly via Metav Werkzeuge or consult the technical team for application support. CCGT060204 SH725 CCGT turning insert, coated carbide, rhombic 06 — Tungaloy The CCGT060204 SH725 is an ISO‑standard rhombic turning insert designed for external and internal turning, offering a tough, edge‑stable grade for variable engagement and smaller tool setups. Coated carbide grade SH725, edge stability Rhombic 06 form with 80° included angle 0.4 mm nose radius for balanced finish and strength Single‑sided chipbreaker for consistent chip control Consistent cutting performance where edge stability matters The coated carbide SH725 grade delivers a balance of toughness and wear resistance that supports repeatable performance in changing engagement conditions. The 0.4 mm nose radius increases component strength at the cutting edge while still enabling a good surface finish for general turning tasks. Specified as an ISO‑standard insert in the rhombic 06 format, this geometry provides a dependable cutting angle and predictable tool life; the 80° included angle gives a robust cutting edge suited to a wide range of turning operations. For production environments that value process stability, the combination of grade and geometry reduces unexpected tool failures and supports steady cycle times. Secure mounting and fast tool changes to reduce downtime The insert features a cylindrical hole with a single‑side countersink (40°–60°) for secure clamping in compatible holders, and the 2.38 mm plate thickness contributes to mechanical stiffness during cutting. Compatibility with a toolholder is governed by form, relief angle, tolerance class, attachment method, size and thickness, so using ISO‑compliant holders and the correct clamping set ensures repeatable seating and fast index changes. The system composition — insert, outer holder or boring bar, shim/clip and replacement screws — is straightforward, enabling quick swaps and minimised setup time on the shop floor. Practical application guidance and selection tips The single‑sided chipbreaker is designed to promote reliable chip formation under a variety of cutting conditions; select the chipbreaker and grade to match the workpiece material and the nature of the cut (continuous vs interrupted). The moderate 7° clearance angle helps to avoid rubbing while maintaining edge support, and the rhombic shape gives flexibility for both external and internal turning. For operations using smaller tools or encountering variable entry and exit conditions, this grade and geometry provide a resilient option that manages edge wear and supports sustained productivity. When specifying inserts for a machining process, consider geometry, nose radius and clamping method as primary factors for achieving the desired surface finish and tool life. Contact Metav Werkzeuge for technical advice, availability of Tungaloy SH725 inserts and recommendations for compatible holders and clamping sets; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6737244 SKU: 6737244-Tungaloy Manufacturer SKU: TUN6737244 Manufacturer: Tungaloy Facts Nose radius: 0.4 mm Included angle: 80° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 06 Special features ISO turning insert series Coated carbide grade SH725 Rhombic plate form Single‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) Compatible for external and internal turning System composed of insert, holder or boring bar, shim/clip and replacement screws FAQ What cutting operations is this insert suited for? The CCGT060204 SH725 insert by Tungaloy is designed primarily for external and internal turning where a tough, edge‑stable grade is required; it performs well in variable engagement conditions and with smaller tooling setups. How does the 0.4 mm nose radius affect the result? A 0.4 mm nose radius offers a compromise between strength and finish: the radius increases edge support and tool life while still enabling acceptable surface quality for general turning tasks with the SH725 grade. Which clamping features ensure secure mounting of the insert? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) which, together with the matching holder and clamping set, provides secure seating and repeatable positioning for reliable tool changes. Is the insert compatible with standard ISO holders? Yes; the insert is ISO‑standard in the rhombic 06 format, but compatibility depends on holder form, tolerance class, attachment method, size and thickness — using matching ISO holders and the correct clamping hardware is recommended. What are the distinguishing characteristics of the SH725 grade? SH725 is a coated carbide grade engineered for toughness and a stable cutting edge, making it suitable for applications with changing cutting conditions or where small tool sizes are used; this supports consistent machining performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 060204 SH730 Wendeplatten - Tungaloy
Take advantage of the coated carbide SH730 grade and the precise 80° rhombic geometry for stable, productive turning; order the insert directly via Metav Werkzeuge or contact the consultants for specification advice. CCGT 060204 SH730 turning insert – ISO rhombic, 80°, Tungaloy The CCGT 060204 SH730 is an ISO‑standard rhombic turning insert designed for external and internal turning, offering a balanced combination of edge toughness and predictable chip control. Coated carbide grade SH730 Rhombic ISO 06 geometry, 80° cutting angle 0.4 mm corner radius for fine finishing Cylindrical hole with single‑side countersink Consistent cutting performance for mixed turning operations The CCGT 060204 SH730 insert delivers dependable cutting performance across a wide range of turning tasks. The SH730 coated carbide grade is formulated for edge toughness and resistance to chipping, which reduces unplanned tool changes and supports uninterrupted production. As the insert is ISO‑standard, it integrates into established machining systems, allowing process planners to maintain cycle times while improving tool life. The one‑sided chipbreaker is optimised for controlled chip formation, which aids coolant penetration and reduces rework. Precision geometry for secure clamping and predictable results Engineered geometry ensures reliable clamping and repeatable results: the rhombic plate form with an 80° main cutting angle provides a robust cutting edge for facing and profile turning, while the 7° clearance angle prevents rubbing during radial engagement. Compatibility to the holder is determined by form, clearance, tolerance class, clamping method, size and thickness; this insert's 2.38 mm plate thickness and ISO 06 size are standard for many external holders and boring bars. The 0.4 mm corner radius supports fine surface finishes without sacrificing stability. Grade and chip control for efficient, low‑risk machining The SH730 grade is a coated, tough carbide designed for variable engagement conditions and smaller tool bodies where sudden load changes can occur. The single‑sided chipbreaker promotes consistent chip flow, helping to avoid chip jamming in confined spaces. For best results, the chipbreaker and grade should be selected in accordance with the workpiece material and cutting parameters; the insert is suited for both roughing and finishing when matched to the correct parameters. The cylindrical hole with a single‑side countersink (40°–60°) ensures secure fastening and repeatable positioning during index changes. For specification support or to source the CCGT 060204 SH730 Tungaloy turning insert, contact Metav Werkzeuge for professional advice and ordering assistance. Technical data Article number: 6854008 SKU: 6854008-Tungaloy Manufacturer SKU: TUN6854008 Model series: ISO turning indexable inserts Designation: CCGT060204 SH730 Numbers / Core technical data Corner radius: 0.4 mm Cutting angle: 80° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 06 ISO code: 060204 Designs / Special features Coated carbide grade SH730 Rhombic plate form One‑sided chipbreaker With hole: cylindrical hole + one‑side countersink (40°–60°) Intended application: turning (external and internal) Compatibility depends on form, clearance, tolerance class, clamping, size and thickness FAQ What holder types are compatible with this insert? Compatibility is determined by form, clearance, tolerance class, clamping method, size and thickness; the CCGT 060204 SH730 fits standard ISO holders for size 06 inserts and uses the cylindrical hole with countersink for secure clamping. Which workpiece materials are suitable for this grade? The SH730 coated carbide insert is developed for a broad material range and is particularly effective where edge toughness is required; selection of the chipbreaker should match the specific workpiece material and machining strategy. How does the corner radius influence the surface finish? A 0.4 mm corner radius on the insert provides a balance between finish and strength: it supports finer surface quality while maintaining sufficient edge stability for interrupted cuts. Is this insert suitable for internal turning and small‑diameter tools? Yes, the insert's design and SH730 grade make it suitable for internal and external turning, including applications with smaller tool bodies and varying engagement conditions. What does the ISO code 060204 indicate? The ISO code denotes the insert geometry and dimensions: size 06, thickness and tolerance parameters consistent with ISO‑standard indexable inserts; the 060204 code helps ensure correct holder and seat matching. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO compatibility, low cutting forces of the TH10 grade and the fine 0.4 mm corner radius for consistent finishing and productive turning cycles. Order the CCGT060204 TH10 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application matching. CCGT060204 TH10 indexable turning insert — Tungaloy CCGT060204 TH10 is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for non-ferrous materials and low-force finishing applications. ISO-standard rhombic geometry TH10 uncoated carbide for non-ferrous metals 0.4 mm corner radius for fine surface finish Cylindrical hole with 40°–60° countersink Consistent cutting performance for non-ferrous turning The ISO design and the TH10 uncoated carbide grade deliver reliably low cutting forces and clean surfaces when machining aluminium and other non-ferrous materials. The rhombic geometry and the 0.4 mm corner radius support fine finishing passes while maintaining stable chip formation. For production environments where surface integrity and repeatability matter, this combination reduces rework and helps to preserve tool life under suitable cutting conditions. Clear compatibility and reliable clamping for safe operation Compatibility with toolholders is determined by shape, clearance angle, tolerance class, clamping method, size and thickness. The insert is supplied with a cylindrical centre hole and a single-sided countersink (40°–60°), enabling secure mounting in ISO holders that accept CCGT-type plates. The 7° clearance angle and 2.38 mm plate thickness are part of the specification to check when selecting a matched holder to ensure correct seating and repeatable cutting geometry. Practical advantages of an uncoated carbide grade An uncoated carbide microstructure in the TH10 grade keeps the cutting edge sharp and reduces the tendency to build up material when machining soft, gummy alloys. The absence of a coating lowers cutting temperatures and cutting forces in certain non-ferrous applications, which supports improved surface finish and helps to avoid smearing on the workpiece. Where abrasion resistance is less critical than edge sharpness, this grade offers an efficient solution. How to select the right chipbreaker and application set-up The insert is fitted with a single-sided chipbreaker; select the chipbreaker and grade based on the workpiece material, depth of cut and machine rigidity. For high-feed finishing choose small depths with fine edge radii, while for roughing larger depths and appropriate feed rates are advised. If uncertain about the optimal setup, request cutting data for similar alloys and the recommended feeds and speeds to align process stability with productivity. For precise non-ferrous turning with a sharp, low-force cutting edge, request the Tungaloy CCGT060204 TH10 insert from Metav Werkzeuge — quote SKU TUN6801303 for exact identification and technical matching, or contact info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice Technical Data Article number: 6801303 Manufacturer SKU: TUN6801303 Vendor SKU: 6801303-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Included angle: 80° Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 06 ISO designation: 060204 Special features Carbide, uncoated Grade TH10 Single-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Rhombic plate form (CCGT) ISO-standardised turning insert Application: external and internal turning, non-ferrous materials Compatibility depends on form, clearance angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The CCGT060204 TH10 insert is optimised for non-ferrous materials; the TH10 uncoated carbide grade promotes sharp cutting and clean surfaces when turning aluminium and similar alloys. How is the insert secured in the holder? The insert features a cylindrical centre hole with a single-sided countersink (40°–60°) and requires an ISO-compatible holder that matches the plate form, thickness (2.38 mm) and clamping arrangement. What edge preparation does the insert have? This indexable insert has a 0.4 mm corner radius and a 7° clearance angle, designed to support fine finishing cuts and reduce surface smearing in soft metals. Is the CCGT060204 TH10 suitable for internal as well as external turning? Yes, the ISO rhombic geometry and standard mounting allow use for both external and internal turning operations when paired with the correct holder and process parameters. Which SKU should be referenced when ordering? Use SKU TUN6801303 or vendor SKU 6801303-Tungaloy to ensure the correct TH10 CCGT060204 turning insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 TH10 Wendeplatten - Tungaloy
CCGT060204 TH10 CCGT Wendeplatte zum Drehen von Tungaloy Die CCGT060204 TH10 ist eine ISO-genormte, rhombische Wendeplatte für das Außen- und Innendrehen, entwickelt für niedrige Schnittkräfte und saubere Oberflächen bei Nichteisenwerkstoffen ISO-genormte Wendeplatte für präzise Drehprozesse Unbeschichtete Hartmetall-Sorte TH10 für niedrige Schnittkräfte Rhombische Form 06 für vielseitige Halterkompatibilität Mit Loch und zylindrischer Senkung für sichere Befestigung Eckenradius 0,4 mm für feine Oberflächenqualität Präzise Schneidkante für saubere Oberflächen Die Kombination aus Hartmetall und der unbeschichteten Sorte TH10 sorgt für eine sehr scharfe Schneidkante, die speziell bei Nichteisenwerkstoffen niedrige Schnittkräfte ermöglicht. Dadurch reduziert sich die Wärmeentwicklung und die Gefahr von Aufbauschneiden; das Resultat ist eine verbesserte Oberflächenqualität und geringerer Werkzeugverschleiß. Für Betriebe, die saubere Schnittkanten und stabile Spanbildung erwarten, bietet diese Wendeplatte ein hervorragendes Kosten-Nutzen-Verhältnis. Vielseitige Einsetzbarkeit und Kompatibilität Dank der rhombischen Plattenform und der ISO-Genormtheit lässt sich die Platte in einer breiten Palette von Außenhaltern und Bohrstangen einsetzen. Beim Austausch ist auf Form, Freiwinkel, Toleranzklasse und Plattendicke zu achten, damit Halter und Platte optimal zusammenwirken. Die CCGT060204 TH10 unterstützt eine einfache Integration in vorhandene Werkzeugbestückungen und reduziert Rüstzeiten durch standardisierte Abmessungen. Montage- und Befestigungssicherheit für industrielle Fertigung Die Wendeplatte ist „mit Loch“ ausgeführt; der zylindrische Lochstil mit einseitiger Senkung (40°–60°) gewährleistet eine sichere Positionierung auf dem Halter und eine reproduzierbare Spannkraft. In Kombination mit der Plattendicke von 2,38 mm und dem Freiwinkel von 7° ergibt sich eine stabile Schnittlage, die Vibrationen verringert und die Standzeit erhöht. Diese Eigenschaft ist besonders relevant bei Serienfertigung und anspruchsvollen Längs- und Planbearbeitungen. Wirtschaftlichkeit durch gezielte Werkstoffwahl Die Entscheidung für eine unbeschichtete Hartmetallsorte kann wirtschaftlich sein, wenn die Bearbeitung auf niedrige Schnittkräfte und saubere Oberfläche ausgelegt ist. Durch die optimierte Spanbildung und die robuste Geometrie reduziert sich die Werkzeugwechselhäufigkeit; das führt zu kürzeren Stillstandszeiten und besseren Ausbringungsraten. Die CCGT060204 TH10 eignet sich deshalb besonders für Anwender, die Prozessstabilität und geringe Gesamtkosten pro Bauteil priorisieren. Empfehlung: Für produktive Zerspanung mit niedrigen Schnittkräften die CCGT060204 TH10 von Tungaloy über Metav Werkzeuge anfragen; bei Bedarf technische Daten per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 klären Produktmerkmale Artikelnummer: 6801293 Marke: Tungaloy Modellserie: ISO-Drehwendeschneidplatten Bezeichnung: CCGT060204 TH10 Hersteller SKU: TUN6801293 Fakten Plattengröße: 06 Plattendicke: 2,38 mm Eckenradius: 0,4 mm Freiwinkel: 7° Winkel: 80° Besonderheiten Material: Hartmetall Schneidstofftyp: unbeschichtetes Hartmetall Sorte: TH10 Plattenform: rhombisch Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig FAQ Welche Werkstoffe sind für die CCGT060204 TH10 geeignet? Die CCGT060204 TH10 von Tungaloy ist speziell für Nichteisenwerkstoffe ausgelegt; die unbeschichtete Hartmetall-Sorte TH10 unterstützt dabei niedrige Schnittkräfte und saubere Oberflächen. Wie beeinflusst der Eckenradius die Oberflächenqualität? Ein Eckenradius von 0,4 mm bietet eine feine Schnittkante, die zu einer verbesserten Oberflächenqualität und geringerer Nacharbeit bei Drehprozessen führt. Welche Bedeutung hat das zylindrische Loch mit Senkung? Das zylindrische Loch mit einseitiger Senkung (40°–60°) sorgt für sichere Befestigung auf dem Halter und für reproduzierbare Positionierung bei Serienwechseln. Wie wähle ich den passenden Halter für diese Wendeplatte aus? Achten Sie auf Form, Freiwinkel, Toleranzklasse, Befestigungsart, Größe und Dicke des Halters, damit die ISO-genormte CCGT060204 TH10 optimal sitzt und vibrationsfrei läuft. Ist die Platte für Innen- und Außendrehen verwendbar? Ja, die ISO-Genorm und die rhombische Form ermöglichen den Einsatz sowohl beim Außen- als auch beim Innendrehen, abhängig von Halterwahl und Bearbeitungsbedingungen. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT 060204 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated carbide grade and ISO compatibility to ensure low cutting forces and reliable surface quality; the robust rhombic geometry and single-sided chipbreaker promote consistent chip control and productivity in turning operations. Order directly via Metav Werkzeuge or consult our specialists for application support. CCGT 060204 TH10 ISO turning insert, uncoated carbide, 0.4 mm radius — Tungaloy A CCGT060204 TH10 ISO-indexed turning insert engineered for external and internal turning, offering a sharp, universal uncoated carbide grade for low cutting forces on non-ferrous materials Rhombic insert in ISO 06 size Uncoated carbide TH10 grade 0.4 mm corner radius Single-sided chipbreaker, with hole Consistent low cutting forces and improved surface finish The TH10 grade is an uncoated carbide developed for applications that demand reduced cutting resistance and clean part surfaces. In practice, this means fewer burrs and lower spindle loads when machining aluminium, brass and similar alloys. The combination of a sharp edge geometry and a finely tuned chipbreaker supports predictable chip formation, which reduces vibration and helps achieve a stable process window. For production environments seeking repeatable part quality, this specification translates into tangible cycle-time stability and fewer reworks. Easy integration into ISO tooling systems for rapid setup As an ISO-series insert, the component matches standard clamping systems when the holder’s shape, clearance angle, tolerance class, fastening arrangement, size and thickness correspond. The presence of a cylindrical hole with a single-sided countersink (40°–60°) enables secure retention in common clamping plates, while the 2.38 mm plate thickness contributes to mechanical rigidity in the cutting zone. These measurable compatibilities simplify tool changeovers and minimise downtime, supporting efficient throughput in mixed-production or jobbing shops. Geometry designed for durability and reliable chip control The rhombic shape with an 0.4 mm corner radius offers a balance between edge strength and the ability to generate fine surface finishes. The single-sided chipbreaker encourages controlled chip separation for the target materials, lowering the risk of long, stringy chips that can foul the process. Together, these aspects improve tool life under recommended cutting conditions and allow machinists to exploit the grade’s sharpness without compromising edge stability. The result is predictable wear behaviour and consistent component quality across batches. Practical application guidance for turning tasks Designed for both outside and inside turning, the insert performs best when the single-sided chipbreaker and TH10 grade are selected according to workpiece material, cutting strategy and machine/tool stability. Where light engagement and fine finishes are required, the uncoated edge supports reduced cutting forces; where more robust removal is needed, consider adjusting feed and depth to maintain edge life. For quick specification checks, reference the ISO designation and the manufacturer SKU to confirm compatibility with the chosen holder and clamping set. For technical advice on integrating this Tungaloy uncoated carbide insert into existing toolholders or to reserve stock under SKU TUN6801298, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored support Technical data Manufacturer article number: 6801298 SKU: 6801298-Tungaloy Model series: ISO turning indexable inserts Core data ISO designation: CCGT060204 Format: 06 Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Corner radius: 0.4 mm Special features Material: carbide Grade: TH10 (uncoated) Shape: rhombic Chipbreaker: single-sided Hole: cylindrical with single-sided countersink (40°–60°) Application: turning (external and internal) Compatibility determined by holder form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert optimised for? The insert is optimised for non-ferrous materials; the TH10 uncoated carbide grade promotes low cutting forces and clean surfaces when machining aluminium and similar alloys. Can this ISO insert be used in standard holders? Yes. The CCGT060204 TH10 follows ISO geometry; compatibility requires matching the holder’s form, clearance angle, tolerance class, fastening and plate thickness. What does the 0.4 mm corner radius mean for my parts? A 0.4 mm radius balances edge strength and finish quality, offering improved durability compared with finer radii while still producing good surface finishes on turning operations. How does the single-sided chipbreaker affect chip control? The single-sided chipbreaker is designed to produce consistent chip segmentation for the intended materials, reducing the occurrence of long swarf and helping maintain stable machining conditions. Which SKU should be quoted when ordering? Please refer to SKU TUN6801298 or manufacturer article number 6801298 when enquiring or ordering this ISO-indexed insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060204 UM 1105 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data CCGT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060204UM1105-SANDVIK Data/ Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1105 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCGT-060204-1105-Sandvik 40END
CCGT 060204 UM 1115 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features indexable inserts CCGT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060204UM1115-SANDVIK Data/ Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1115 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCGT-060204-1115-Sandvik 40END
CCGT 060204 UM 1125 Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Design details indexable inserts CCGT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060204UM1125-SANDVIK ISO-Code: CCGT060204 Grade: 1125 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.4 Chip Breaker: UM Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCGT-060204-1125-Sandvik 40END
CCGT 060204 UM 1515 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features CCGT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060204UM1515-SANDVIK Facts / Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 1515 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCGT-060204-1515-Sandvik 40END
CCGT 060204 UM 2035 Indexable Insert - Sandvik
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Specifications CCGT 060204 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060204UM2035-SANDVIK Facts & Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Grade: 2035 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCGT-060204-2035-Sandvik 40END
CCGT 060204 UM 5015 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications insert CCGT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060204UM5015-SANDVIK Data/ Figures: ISO-Code: CCGT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: 5015 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCGT-060204-5015-Sandvik 40END
CCGT 060204 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of precise ISO compatibility, a sharp UX30 carbide cutting edge, and a secure clamping interface for dependable turning results; order the insert directly via Metav Werkzeuge or consult the company's technical advisors for holder matching and application advice. CCGT060204 UX30 CCGT turning insert — Tungaloy, rhombic 06, 7° clearance The CCGT060204 UX30 Tungaloy turning insert designed for ISO‑standard external and internal turning, offering a sharp cutting edge for low cutting forces and consistent chip formation. ISO‑compatible rhombic insert, size 06 UX30 uncoated carbide with sharp cutting edge Single‑sided chipbreaker, cylindrical hole 7° clearance, 2.38 mm thickness, 80° angle Precise ISO fit for predictable machining performance The ISO‑compatible rhombic geometry ensures reliable seating in standard external holders and boring bars; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness so correct pairing reduces setup variability. The standardised contour and the cylindrical hole with single‑side countersink provide repeatable clamping and stable cutting conditions, which lowers the risk of chatter and contributes to consistent component tolerances in series production. Sharp uncoated carbide grade for low cutting forces and clean chips The insert is supplied in uncoated carbide (UX30) with a deliberately sharp cutting edge and a single‑sided chipbreaker optimised for controlled chip formation. This combination is intended for applications where low cutting forces and efficient chip evacuation are priorities; the result is reduced load on the machine spindle and improved surface quality on turned parts. The design supports both external and internal turning tasks while maintaining effective heat distribution at the cutting zone. Small radius and secure clamping for fine profiles and productivity A 0.4 mm corner radius together with an 80° main cutting angle enables fine profiling and accurate radii on shafts and bores, while the 2.38 mm plate thickness gives sufficient rigidity for standard turning operations. The insert’s hole style (cylindrical hole plus one‑sided countersink at 40°–60°) and ISO form facilitate secure retention with ISO holders and clamping sets, improving tool life and reducing downtime for insert changeovers. For precise holder matching and to maximise process reliability, Metav Werkzeuge can advise on the correct holder and clamping components. For precise, cost‑effective turning with Tungaloy carbide inserts, contact Metav Werkzeuge for ordering and detailed holder compatibility — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical Data Article number: 6801299 SKU: 6801299-Tungaloy Manufacturer SKU: TUN6801299 Model series: ISO‑Drehwendeschneidplatten Designation: CCGT060204 UX30 Tungaloy insert Material: carbide Core specifications Main cutting angle: 80° Corner radius: 0.4 mm Clearance angle: 7° Plate thickness: 2.38 mm Insert size: 06 ISO code: 060204 Features and compatibility Rhombic plate form Single‑sided chipbreaker Cylindrical hole + one‑sided countersink (40°–60°) Uncoated carbide grade UX30 Application: turning (external and internal) Compatible with ISO holders, clamping sets and replacement screws FAQ Which holder types are compatible with this insert? The CCGT060204 UX30 Tungaloy insert fits holders and boring bars that accept the ISO rhombic CCGT format; compatibility is defined by form, clearance angle, tolerance class, fastening, size and thickness. Is the insert coated or uncoated? This grade is supplied as uncoated carbide (UX30); the sharp cutting edge is intended for operations prioritising low cutting forces and good chip control. For which turning tasks is the insert recommended? The insert is designed for both external and internal turning where a small corner radius and stable chip formation are required, particularly when low cutting forces are advantageous. What does the chipbreaker design provide? The single‑sided chipbreaker on this insert promotes controlled chip formation and evacuation, which helps maintain surface finish and reduces the likelihood of chip entanglement in turning operations. How does the 0.4 mm corner radius affect the finish? A 0.4 mm corner radius balances edge strength and the ability to produce fine profiles; it supports good surface quality on shafts and small turned features. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060208 Indexable Insert for Aluminium - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product details indexable inserts CCGT 060208 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060208-Aluminium Data & Figures: ISO-Code: CCGT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060208-Aluminium-MetavCUT 40END
CCGT 060208 Indexable Insert for Stahl - MetavCUT
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features CCGT 060208 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060208-Steel Data & Figures: ISO-Code: CCGT060208 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060208-Stahl-MetavCUT 40END
CCGT 060208 Indexable Insert for Stainless Steel - MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Design details CCGT 060208 inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCGT060208-Stainless ISO-Code: CCGT060208 Usage for: Stainless steel Material: cemented carbide Form: rhombic Usable to the work on: Stainless Steel Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 2,38mm Radius: 0.8 Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCGT-060208-Stainless Steel-MetavCUT 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com