Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT 060202 NS9530 Wendeplatten - Tungaloy
Take advantage of precise finishing and low cutting forces thanks to the uncoated cermet NS9530 grade and the fine 0.2 mm corner radius, combined with full ISO compatibility for easy toolholder interchange. Order the insert directly via Metav Werkzeuge or ask the consultants for application support. CCGT 060202 NS9530 ISO turning insert — finishing cermet by Tungaloy CCGT060202 NS9530 is an ISO‑standard rhombic turning insert designed for finishing steel with a fine corner radius and a sharp cutting edge ISO‑standard rhombic insert size 06 Uncoated cermet NS9530 for finishing 0.2 mm corner radius for superior surfaces With hole and one‑sided countersink for secure clamping Consistent high-quality surface finish with low cutting forces The insert delivers a dependable finishing performance for steel thanks to the uncoated cermet NS9530 composition and a 0.2 mm corner radius, which together reduce cutting forces and support continuous cuts with small depths of cut. The sharp cutting edge characteristic of this grade produces a high surface finish and lower burr formation, making it particularly suitable where dimensional accuracy and surface integrity are priorities. The result is predictable component quality and fewer downstream operations. Reliable fit and stable clamping for efficient turning cycles Built to ISO dimensions, the rhombic 06 format and an included angle of 80° ensure wide compatibility with standard holders; the 7° clearance angle supports stable cutting geometry. The presence of a cylindrical hole with a single‑sided countersink (40°–60°) provides secure clamping and repeatable positioning, reducing setup time and vibration. A single‑sided chipbreaker is provided for controlled chip flow during finishing passes, which helps maintain process stability and throughput. Practical selection and system guidance for shop success When integrating this insert into a turning system, pair the plate with a matching outer holder or boring bar, a suitable shim/clamp set and replacement screws to ensure correct seating and repeatable results. The NS9530 finishing grade is optimised for steel finishing with continuous cuts; selecting an appropriate chipbreaker and cutting data will extend tool life and improve part consistency. For shops seeking both precision and predictable productivity, the combination of ISO compatibility and the fine‑edge cermet grade supports efficient process planning and short cycle times. Contact Metav Werkzeuge for tailored application advice on Tungaloy finishing inserts and precise cutting data to match the CCGT 060202 NS9530 to the specific turning task Technical data Article number: 6997901 SKU: 6997901-Tungaloy Manufacturer SKU: TUN6997901 Label: CCGT060202 NS9530 Tungaloy-Wendeplatte Data Corner radius: 0.2 mm Clearance angle: 7° Plate thickness: 2.38 mm Included angle: 80° Size: 06 Special features ISO turning insert, rhombic shape Uncoated cermet grade NS9530 Single‑sided chipbreaker With hole; cylindrical hole + one‑sided countersink (40°–60°) Intended application: turning (finishing steel) Model series: ISO‑standard turning inserts FAQ Is this insert suitable for finishing steel? The CCGT060202 NS9530 insert is designed as a finishing grade for steel; the uncoated cermet provides a sharp edge and low cutting forces for improved surface quality. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate size; the ISO‑standard rhombic 06 format of the insert fits widely used ISO holders when those parameters match. What clamping features does the insert provide? The insert has a cylindrical hole with a single‑sided countersink (40°–60°) for secure, repeatable clamping and reliable seating in the tool system. When should the NS9530 grade be chosen over a coated carbide? NS9530 is recommended for finish turning with continuous cuts and small depths of cut where a sharp edge and excellent surface finish are required; coated carbides are more suited to interrupted cuts or higher feed roughing operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 NS9530 Wendeplatten - Tungaloy
Thanks to its uncoated cermet cutting material and a fine R0.2 corner radius, this insert delivers a consistent high surface finish with low cutting forces for finishing operations on steel; compatibility with ISO CCGT holders ensures straightforward integration into existing tool systems. Order the original Tungaloy insert via Metav Werkzeuge or contact our advisers for application guidance. CCGT060202 NS9530 ISO turning insert, 80° approach, 7° clearance — Tungaloy A CCGT060202 NS9530 indexable insert designed for precision turning and finishing on steel, offering a rhombic 06 form with a 0.2 mm corner radius and a single-sided chipbreaker for continuous cuts Uncoated cermet for sharp cutting edge Finishing grade for continuous cuts on steel 0.2 mm corner radius, rhombic size 06 Cylindrical hole with single-side countersink Precise finishing with reduced cutting forces The insert’s uncoated cermet composition delivers a finishing grade optimised for low cutting forces and a sharp cutting edge, which in turn produces superior surface quality on steels. For finishing passes and light depths of cut, the combination of a 0.2 mm corner radius and a finely honed edge reduces chatter and micro-vibration, resulting in consistent part tolerances. The geometry is particularly suitable for continuous cutting regimes where edge integrity and surface integrity are decisive. Easy integration into ISO tool systems Compatibility with common holders is determined by the insert’s form, clearance angle (7°), tolerance class, fastening method and thickness. The rhombic 06 shape and the cylindrical hole with single-sided countersink (40°–60°) permit secure clamping in standard ISO CCGT-compatible toolholders and boring bars. This means the insert can be adopted within existing tool setups with minimal adjustment, supporting quick tool changes and reduced machine downtime. Material and chip control explained for production reliability The grade NS9530 is an uncoated cermet purpose-built for finishing steel: the material structure delivers a hard, sharp edge with good wear resistance under low to moderate cutting temperatures. The single-sided chipbreaker is matched to the grade to encourage predictable chip formation during continuous cuts and small feed rates, helping to avoid built-up edge and preserving surface quality. For operators less familiar with cermets: they combine ceramic and metallic phases to balance wear resistance with toughness, making them ideal for finishing applications. Productivity benefits and application recommendations By favouring a sharp edge and low cutting forces, the insert supports reduced tool-change frequency and stable process windows in finishing operations. The 80° approach angle assists in controlled engagement on external profiles, while the compact thickness (2.38 mm) and size 06 format suit fine-detail turning and internal profiling where access is limited. For process planning, select feeds and speeds aligned to finishing practice for steel and verify holder clearance; predictable surface finish and dimensional control are the primary operational advantages. Contact Metav Werkzeuge for sample availability, cutting-data recommendations or to order original Tungaloy inserts (SKU TUN6723907) — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 6723907-Tungaloy Manufacturer article number: 6723907 Manufacturer SKU: TUN6723907 Model series: ISO-Drehwendeschneidplatten Product designation: CCGT060202 NS9530 Facts Approach angle: 80° Clearance angle: 7° Corner radius: 0.2 mm Thickness: 2.38 mm Size: 06 Special features Material: carbide (cermet grade NS9530) Plate form: rhombic Hole: with cylindrical hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning, finishing on steel FAQ What materials is this insert best suited for? The NS9530 grade insert is designed as a finishing solution for steel; its uncoated cermet composition provides a sharp edge and good surface quality on continuous cuts. How does the 0.2 mm corner radius affect performance? A corner radius of 0.2 mm reduces cutting forces and vibration during finishing passes, improving surface finish and dimensional stability for fine-turning operations. Is the insert compatible with standard ISO CCGT holders? Compatibility is achieved through the rhombic form, 7° clearance, thickness and the central cylindrical hole with countersink; it fits ISO CCGT-style holders that accept the 06 size. Can this insert be used for interrupted cuts or roughing? This grade is optimised for finishing and continuous cuts; for heavy interrupted cutting or roughing, a tougher, coated grade or different geometry is recommended. What is the significance of the single-sided chipbreaker? The single-sided chipbreaker promotes controlled chip formation in finishing feeds, reducing the likelihood of built-up edge and aiding consistent surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the entry for the cutting material is given as an uncoated cermet, while the general material field records carbide (cemented carbide). These terms denote different substrate families with distinct mechanical properties, cutting behaviour and recommended cutting parameters, and the discrepancy prevents an accurate, reliable product description. For correct classification and safe application guidance, please confirm whether the insert is a cermet grade or a cemented carbide grade, and verify the coating status and intended finishing application. Once the substrate and coating information are confirmed, a full, standards-compliant product text describing compatibility, cutting performance and benefits for turning operations can be produced.
CCGT 060202 NS9530 Wendeplatten - Tungaloy
Benefit from low cutting forces and a superior surface finish thanks to the NS9530 uncoated cermet; the ISO rhombic geometry with a 0.2 mm corner radius and 7° clearance delivers repeatable finishing results for turning operations. Order the insert directly via Metav Werkzeuge or consult our application specialists for tailored advice. CCGT060202 060202 NS9530 Tungaloy turning insert — rhombic ISO finishing insert, 0.2 mm radius, 7° clearance The CCGT060202 NS9530 Tungaloy is a rhombic ISO turning insert optimised for finishing steel, combining a sharp cutting edge with a low-force cermet grade for consistent high-quality surfaces. High-gloss surface finish for steels Uncoated cermet grade NS9530 0.2 mm corner radius for fine turning ISO rhombic shape CCGT with 7° clearance Precision finishing with measurable benefits The insert provides a clear, measurable benefit in finishing operations: the uncoated cermet NS9530 offers a sharp cutting edge and inherently low cutting forces, which reduces cutting vibrations and helps achieve a superior surface finish on steels. The small 0.2 mm corner radius is designed for fine turning and small depths of cut, enabling consistent profile control and reduced rework. For production environments that prioritise repeatability, the combination of material and geometry supports stable results during continuous cuts. Designed for ISO-compatible tool systems and secure clamping Compatibility is governed by form, free clearance, tolerance class, fixation method, size and thickness; the rhombic CCGT form and with hole mounting provide secure positioning in standard ISO outside holders or boring bars. The insert features a cylindrical hole with a single-sided countersink (40°–60°) for positive seating and reliable torque transfer. With a plate thickness of 2.38 mm and a nominal included angle of 80°, the geometry is suitable for common external and internal turning setups that require precise location and repeatable orientation. Material behaviour and application recommendations The NS9530 grade is an uncoated cermet designed as a finishing grade for steels: it produces a fine surface without aggressive cutting forces and is particularly well suited to continuous machining and small feeds. The one-sided chipbreaker supports predictable chip formation under stable cutting conditions; this enhances process reliability and reduces the likelihood of built-up edge. Where softening or work-hardening occurs, selecting a matching holder rigidity and optimising feed rates will preserve edge integrity and prolong usable life. Operational advantages and process advice Using a small corner radius together with the NS9530 cermet reduces radial cutting force peaks and improves finish, which can shorten downstream processing and inspection times. The insert’s rhombic outline and 7° clearance lower friction at the flank, improving dimensional stability of the turned component. For series production, confirm holder compatibility with the ISO code and ensure clamp hardware matches the intended tolerance class to maintain repeatable clamping and minimise runout. Contact Metav Werkzeuge for application-specific recommendations on the Tungaloy NS9530 finishing insert; our technical consultants will confirm holder compatibility and suggest the optimal cutting parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997910 SKU: 6997910-Tungaloy Manufacturer SKU: TUN6997910 Manufacturer: Tungaloy Core data Corner radius: 0.2 mm Included angle: 80° Free clearance: 7° Thickness: 2.38 mm Size: 06 Special features Grade: NS9530 (uncoated cermet) Chipbreaker: one-sided Hole: with cylindrical hole + single-sided countersink (40°–60°) Shape: rhombic (CCGT) Application: turning (finishing on steel) System: ISO turning insert compatibility; suited to continuous cuts and small depths of cut FAQ Which materials is this insert best suited for? The CCGT060202 NS9530 Tungaloy insert is specified as a finishing grade for steels; the uncoated cermet composition provides a sharp edge and low cutting forces ideal for producing high-quality surfaces on steel workpieces. How is the insert fixed in the holder? Fixation uses the central cylindrical hole with a single-sided countersink (40°–60°); this seating arrangement combined with the rhombic CCGT form ensures secure clamping in compatible ISO outside holders or boring bars. What cutting situations benefit most from the NS9530 grade? The NS9530 grade is optimised for continuous cutting and small feed or depth-of-cut scenarios where a fine surface finish and low cutting forces are required; it is particularly effective in finishing passes on steels. Can the insert handle interrupted cuts or heavy roughing? This insert is a finishing-type grade; interrupted cuts or heavy roughing are not the intended primary use. For such applications, a more robust grade and geometry would be recommended instead of the NS9530 finishing insert. How does the 0.2 mm corner radius affect component quality? The 0.2 mm corner radius produces a fine contour transition and reduces cutting force peaks, which improves dimensional stability and surface integrity during fine turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 NS9530 Wendeplatten - Tungaloy
Product data conflict detected: the field "material" is listed as "Hartmetall" while the cutting material type is given as "unbeschichtetes Cermet" (uncoated cermet). These entries are inconsistent and prevent the creation of a reliable product description. Please resolve the contradictory material information and resubmit the data, ensuring that all fields are accurate, consistent, and aligned with the product's specifications to avoid further issues or delays in processing, as discrepancies in material details can lead to confusion, misrepresentation, or errors in the final documentation and product classification.
CCGT 060202 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of durable SH7025 carbide grade, a precise 0.2 mm corner radius and ISO compatibility for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for tailored advice. CCGT 060202 SH7025 ISO turning insert CCGT — rhombic 06, 0.2 mm radius | Tungaloy CCGT060202 SH7025 is an ISO-format indexable insert for external and internal turning, engineered to deliver stable cutting edges in variable engagement conditions. ISO-indexed turning insert CCGT06 format SH7025 grade for edge stability Rhombic 06 with 0.2 mm corner radius Cylindrical hole with countersink 40°–60° High productivity through stable cutting performance The CCGT060202 indexable plate combines a cemented carbide substrate with the SH7025 grade to provide reliable edge stability during turning operations. This formulation is particularly effective where small tools or fluctuating entry conditions occur, reducing unexpected tool wear and stoppages. The result is improved process efficiency and more predictable tool-life, which supports leaner planning and fewer unscheduled changeovers. Forshops seeking consistent chip formation and repeatable finishes, this insert offers a pragmatic balance between robustness and economy. Compatibility and secure clamping for operational reliability Designed as an ISO-standard turning insert, the rhombic 06 format and the 7° relief angle ensure straightforward matching to widely used holders. The 2.38 mm plate thickness contributes to rigidity while the cylindrical hole with a single-sided countersink (40°–60°) enables secure clamping and precise axial positioning. These dimensional standards make it easier to replace and index inserts without lengthy set-up adjustments, shortening downtime and simplifying inventory management for diverse turning tasks. Application-focused geometry for finishing and medium-duty roughing With a single-sided chipbreaker and a small 0.2 mm radius, the geometry of this insert is oriented towards neutral to light cutting operations where surface quality and controlled chip flow matter. The single-sided breaker supports predictable chip evacuation in many turning contexts, while the modest corner radius offers a compromise between edge strength and fine surface generation. The combination suits both external and internal turning when the right breaker and grade are selected for the workpiece material, allowing flexible use across mixed production runs. For stock availability, technical guidance or to procure genuine Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the CCGT060202 SH7025 and application-specific recommendations Technical Data Article number: 6967369 Manufacturer SKU: TUN6967369 Stock SKU: 6967369-Tungaloy Item name: CCGT060202 SH7025 Tungaloy turning insert Core Dimensions Plate size: 06 Plate form: rhombic Plate thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Features & Materials Material: cemented carbide Grade: SH7025 Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Series: ISO turning indexable plates Intended use: turning (external and internal) FAQ What applications suit this insert best? The CCGT060202 SH7025 Tungaloy turning insert is intended for external and internal turning, offering good edge stability for small tools and variable engagement conditions. How does the SH7025 grade affect performance? The SH7025 grade provides a balance of toughness and wear resistance; the SH7025-coated carbide helps maintain cutting-edge integrity during intermittent cuts and changing entries with the CCGT060202 plate. Which holders are compatible with this ISO plate? Compatibility depends on holder form, relief, tolerance class, fastening and thickness; the ISO-standard rhombic 06 shape and the cylindrical hole with countersink facilitate matching to common external holders and boring bars. What cutting geometry should be selected for better surface finish? For improved surface quality, choose the small corner radius and a suitable single-sided chipbreaker; the 0.2 mm radius on this insert helps achieve finer finishes while maintaining adequate edge strength. Is this a genuine Tungaloy item and what is the SKU? Yes — this is an original Tungaloy indexable turning insert; SKU: 6967369-Tungaloy (Manufacturer article number 6967369). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 SH7025 Wendeplatten - Tungaloy
Reliable machining with a tough, coated grade and precision geometry ensures repeatable turning results; take advantage of the SH7025 coated carbide's edge stability and the 0.2 mm corner radius for controlled finishes. Order the CCGT060202 SH7025 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT 060202 SH7025 – Indexable turning insert by Tungaloy (for turning) CCGT060202 SH7025 Tungaloy insert is an ISO-standard rhombic insert for external and internal turning, offering a combination of durable coating and consistent chip control ISO-standard rhombic insert Coated carbide grade SH7025 Single-sided chipbreaker design Cylindrical hole with countersink Durable coated carbide for steady cutting performance The featured grade, SH7025, is a coated carbide developed for toughness and edge stability. In routine turning operations this composition reduces edge chipping under variable engagement conditions, which leads to fewer index changes and improved tool-life predictability. The coating supports consistent friction characteristics and contributes to reliable surface quality when used in standard turning cycles. This makes the insert particularly suited to applications where small tools or fluctuating cut depths are common, enabling a stable process even with limited fixture rigidity. Geometry engineered for repeatable accuracy The insert's rhombic 06 format and 0.2 mm corner radius provide a balance between strength and detail on the workpiece edge. A 7° relief angle and plate thickness of 2.38 mm ensure the insert seats securely in compatible holders while maintaining the correct cutting orientation. These geometric parameters support close tolerance turning and predictable tool offsets, reducing setup time and ensuring consistent dimensional results across batches. For shops focused on repeatability, this geometry minimises variation between index changes. Secure mounting and broad holder compatibility Compatibility with a holder is determined by form, relief angle, tolerance class, fastening method, size and thickness; the insert features a cylindrical hole with a single‑side countersink (40°–60°) to match many clamping systems. The central hole and countersink combination provides secure clamping and precise datum location, improving repeatability after reseating. When integrated into a system—ISO insert, matching external holder or boring bar, underlay/clamping kit and spare screws—the component contributes to a robust assembly that simplifies tool management and replacement logistics. Effective chip control for diverse turning tasks The one‑sided chipbreaker design promotes orderly chip formation and evacuation during both external and internal turning operations, helping to avoid entanglement and reducing rework time. Selecting the correct chipbreaker and the SH7025 grade according to workpiece material and process stability ensures optimised performance: better surface finish, predictable cutting forces and extended time between index changes. In short runs or interrupted cuts the engineered chip control reduces the risk of obstruction and improves operator safety. System thinking: how the insert fits the production flow This ISO series insert is intended to be used as part of a complete turning system; the recommended setup includes a compatible outside holder or boring bar, appropriate underlay and clamping set, plus replacement fixing screws for quick maintenance. The combination of coated carbide, precise geometry and standardised hole form supports high process uptime and straightforward inventory handling. For production environments aiming to maintain steady throughput, the insert provides a practical route to improved productivity without complex retooling. Contact Metav Werkzeuge for tailored application advice, availability of genuine Tungaloy CCGT060202 SH7025 inserts and recommendations for the optimal holder and clamping configuration Technical data Article number: 6967439 Manufacturer SKU: TUN6967439 Model series: ISO turning indexable inserts Material: coated carbide (Hartmetall) Facts ISO designation: CCGT060202 Insert size: 06 Plate form: rhombic Plate thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 7° Included hole: cylindrical hole + single-side countersink (40°–60°) Special features Grade: SH7025 Chipbreaker: single-sided Application: turning (external and internal) Compatibility: depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The SH7025 coated carbide insert is designed for general turning where toughness and edge stability are required; selection of the correct chipbreaker and cutting data should be matched to the specific workpiece material and process. How does the hole and countersink affect mounting? The cylindrical hole with a single‑side countersink (40°–60°) on the CCGT060202 insert ensures secure clamping and precise datum location when used with compatible holders and clamping kits. Can this insert be used for both external and internal turning? Yes, the insert is intended for both external and internal turning operations when paired with the appropriate outside holder or boring bar. Which component in the system should be replaced first when wear is detected? Wear removal is typically managed by indexing the insert; when repeated edge wear occurs, replacement of the insert itself (CCGT060202 SH7025) is recommended before assessing holder or clamping component life. What system components are needed to use this insert in production? A complete system consists of the ISO insert, a matching external holder or boring bar, an underlay/clamping set and replacement fixing screws for reliable assembly and repeatable seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of a proven SH7025 coated carbide grade, compact 0.2 mm corner radius and secure clamping geometry for consistent finishing and long tool life; order the insert directly via Metav Werkzeuge or consult the technical team for application support. CCGT 060202 SH7025 Turning insert — Tungaloy A CCGT060202 rhombic indexable insert designed for precision external and internal turning with a single-sided chipbreaker, optimised for variable engagement and small-tool applications ISO rhombic insert CCGT geometry SH7025 coated carbide for stable edge life 0.2 mm corner radius for fine surface finish Cylindrical hole with 40°–60° countersink Consistent cutting-edge performance with a robust coated grade The SH7025 coating combines a wear-resistant surface with a tough carbide substrate to deliver stable cutting-edge behaviour across interrupted and continuous turning. This performance is particularly valuable where small indices or changes in depth of cut occur: the substrate contributes to shock resistance while the coating maintains low wear rates, leading to longer tool life and reduced regrinding intervals. The engineering of the grade enables reliable machining of a broad range of materials when the correct chipbreaker and cutting data are selected. Precision geometry that improves finish and repeatability The rhombic CCGT geometry with an included angle of 80°, a 0.2 mm corner radius and a 7° clearance angle delivers controlled chip formation and consistent tool engagement. The slim 2.38 mm thickness and the cylindrical hole with single-side countersink (40°–60°) ensure precise seating on the clamp and repeatable positioning during insert changes. These features reduce vibration and help achieve improved surface quality on both external and internal profiles while maintaining reliable clamping even in compact holders. ISO-system compatibility and a practical tooling strategy Designed to ISO standards, this indexable insert integrates into standard toolholders and boring bars where form, clearance, tolerance class, attachment and size match. The single-sided chipbreaker is suitable for turning operations where economical chip control and process stability are required; the grade and chipbreaker selection should be matched to the workpiece material and machining strategy. Tungaloy manufacturing quality supports predictable, repeatable results and a pragmatic approach to tool inventory and replacement, contributing to shorter set-up times and higher overall productivity. For tailored recommendations on insert grade, chipbreaker selection or availability, contact Metav Werkzeuge for personalised technical advice and fast delivery — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967402 SKU: 6967402-Tungaloy Manufacturer SKU: TUN6967402 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Size: 06 Features Grade/coating: SH7025 Material: carbide Plate shape: rhombic Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: Turning WPL designation: CCGT060202 FAQ What materials is this insert suitable for? The SH7025-coated carbide insert is intended for a wide material range when matched with the correct chipbreaker and cutting data; select the CCGT060202 configuration according to workpiece characteristics. How is the insert secured in the holder? The insert uses a cylindrical hole with a single-side countersink (40°–60°) for positive clamping; proper seating on the clamp and correct screw torque ensure repeatable clamping. Can this insert be used for both external and internal turning? Yes, the rhombic geometry and the single-sided chipbreaker make the insert suitable for both external and internal turning operations within ISO-compatible tool systems. What advantage does the 0.2 mm corner radius provide? A 0.2 mm radius supports finer surface finishes and reduced cutting forces in finishing passes while still offering sufficient edge strength for many small-tool applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of SH7025 coated carbide and a rhombic CCGT form for stable cutting performance and adaptable use in external and internal turning; order directly via Metav Werkzeuge or consult the technical team for application matching. CCGT 060202 SH7025 indexable turning insert by Tungaloy — coated carbide, rhombic 06 for turning CCGT060202 SH7025 is a rhombic, ISO‑standard indexable insert designed for turning operations where edge stability and reliable chip control are required SH7025 coated carbide grade Rhombic insert, size 06 Single-sided chipbreaker design Cylindrical hole with countersink 40°–60° Stable edge life for variable turning operations The SH7025 grade is a coated carbide developed for edge stability under changing engagement conditions, making it especially suitable for smaller toolholders and interrupted cuts. The coating and substrate combination reduces flank wear and provides consistent tool life, which in turn lowers downtimes and helps maintain component tolerances. For production settings where repeatability matters, the combination of grade SH7025 and a defined chipbreaker converts unstable cutting conditions into predictable performance. Geometry engineered to simplify setup and compatibility The rhombic CCGT geometry with an 80° included angle and a 0.2 mm corner radius offers a balance between strength and sharpness for finishing and light roughing. The insert presents a 7° clearance angle and a plate thickness of 2.38 mm, dimensions that determine compatibility with ISO turning holders; fit is influenced by form, clearance angle, tolerance class, fastening and plate size. The central cylindrical hole with a single‑sided countersink (40°–60°) ensures secure clamping and straightforward indexation, while the single‑sided chipbreaker improves chip control for many steel and alloy turning tasks. Practical system fit and application guidance As part of an ISO indexable insert system, the component functions together with a matching external holder or boring bar, a backing/clamping set and replacement screws. Typical use cases include external and internal turning where a single‑sided chipbreaker and a coated carbide grade like SH7025 provide both chip control and wear resistance. Selection of chipbreaker type and grade should follow the workpiece material and the machine‑tool stability: the grade excels in conditions with variable cutting depths and intermittent cuts, offering a practical balance between performance and economy. Contact Metav Werkzeuge for tailored application advice and ordering support for the Tungaloy CCGT060202 SH7025 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification matching and availability Technical data Article number: 6967440 Manufacturer SKU: TUN6967440 Product SKU: 6967440-Tungaloy Designation: CCGT060202 SH7025 Facts Size: 06 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 80° Countersink angle: 40°–60° Special features Coated cemented carbide material Grade: SH7025 Rhombic insert form (CCGT) Single-sided chipbreaker Cylindrical hole with single-sided countersink ISO indexable turning insert Typical application: Turning FAQ What materials are suitable for this insert? The CCGT060202 SH7025 insert is a coated cemented carbide grade designed for a broad range of turning tasks; it is particularly effective on steels and alloys under variable engagement conditions. How does the chipbreaker affect performance? The single-sided chipbreaker on this Tungaloy insert improves chip control and evacuation, reducing re-cutting of chips and contributing to consistent cutting forces during turning. Is the insert compatible with standard ISO holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness; the insert follows ISO dimensions for CCGT form and is intended for use with matching ISO external holders or boring bars. What is the corner radius and why does it matter? The corner radius is 0.2 mm; a smaller radius delivers finer surface finish and less cutting force, suitable for finishing passes, while larger radii increase edge strength for roughing. Which SKU identifies this product? The product is listed under SKU 6967440-Tungaloy and manufacturer SKU TUN6967440 for ordering and inventory purposes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 SH7025 Wendeplatten - Tungaloy
Benefit from the combination of the ISO‑standard geometry and the resilient SH7025 coated grade for consistent edge life and stable chip formation; the 80° rhombic form and precise mounting hole ensure predictable compatibility with standard holders. Order directly via Metav Werkzeuge or consult our technical advisors for optimal tool selection. CCGT060202 SH7025 — ISO turning insert, 80° rhombic by Tungaloy CCGT060202 SH7025 is an ISO‑standard rhombic indexable insert designed for external and internal turning applications, offering a robust, edge‑stable grade suited to variable engagement conditions SH7025 coated carbide, high edge stability ISO rhombic CCGT06 geometry, 80° cutting angle One-sided chipbreaker for reliable chip control Cylindrical hole with single-sided countersink Longer tool life from a grade built for variable conditions The SH7025 grade is a coated carbide formulation optimised for turning tasks where tool engagement can vary. With improved toughness and a focus on stable cutting edge performance, this insert supports longer in‑machine times and reduced interruption for changes. The coating enhances wear resistance while the substrate ensures resilience against edge chipping, which together translate into more consistent component quality and fewer unexpected tool changes during production. Predictable fit and fast setup through ISO geometry Manufactured to ISO standards as a CCGT060202, the insert features an 80° rhombic cutting geometry and a 7° relief angle, ensuring compatibility with a wide range of external holders and boring bars. The defined form, tolerance class, size (06) and 2.38 mm plate thickness give a clear reference for selecting the correct seat and clamp. The cylindrical hole with a single‑sided countersink (40°–60°) further secures repeatable clamping, helping to reduce setup time and improve process reliability across batches. Controlled chip formation and application guidance Equipped with a one‑sided chipbreaker, the insert supports stable chip control in both roughing and finishing passes where appropriate. The 0.2 mm corner radius is suited to semi‑finishing and finishing operations that require a fine surface finish while maintaining edge strength. Intended for turning (external and internal), the grade performs particularly well on smaller toolholders or when cutting conditions change; selecting the correct chipbreaker and toolholder stiffness will directly influence surface finish and cycle time. For complex materials or mixed production runs, technical consultation is available to specify the optimal combination of holder, insert grade and process parameters. Request a tailored consultation from Metav Werkzeuge for Tungaloy SH7025 inserts and ensure the right insert geometry for each turning task — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for ordering and technical advice Technical data Article number: 6967375 Manufacturer SKU: TUN6967375 Vendor SKU: 6967375-Tungaloy Manufacturer: Tungaloy Model series: ISO turning inserts Facts Insert designation: CCGT060202 Cutting angle: 80° Relief/freesurface angle: 7° Corner radius: 0.2 mm Thickness: 2.38 mm Size: 06 Special features Grade/coating: SH7025 Material: cemented carbide Plate form: rhombic Hole: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: external and internal turning Compatibility: ISO‑standard mounting determined by form, relief angle, tolerance, size and thickness FAQ What applications is the CCGT060202 SH7025 insert best suited for? The CCGT060202 SH7025 insert is designed for external and internal turning where variable engagement and reliable edge stability are required, especially on smaller toolholders or mixed production conditions. How does the SH7025 grade affect tool life? The SH7025 coated carbide grade improves wear resistance and toughness; the combination reduces edge chipping and leads to more consistent tool life under varying cutting conditions. What must be considered when mounting the insert in a holder? Mounting compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; the ISO‑standard CCGT geometry and the cylindrical hole with countersink support repeatable clamping. Is the 0.2 mm corner radius suitable for finishing passes? A 0.2 mm corner radius offers a balance between edge strength and surface finish, making it appropriate for semi‑finishing and finishing when combined with correct feed and speed settings. Does the insert include a specific chipbreaker and what is its effect? This insert features a one‑sided chipbreaker designed to promote controlled chip formation, improving process stability and reducing the risk of long chips in many turning scenarios. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 SH725 Wendeplatten - Tungaloy
Combining the SH725 coated carbide grade with the ISO‑standard CCGT060202 form delivers stable cutting edges and consistent performance in external and internal turning; order directly via Metav Werkzeuge or consult our specialists for application advice. CCGT060202 SH725 indexable turning insert — coated carbide, 0.2 mm nose radius — Tungaloy The CCGT060202 SH725 is an ISO‑standard rhombic turning insert intended for external and internal turning, offering reliable edge stability and adaptable chip control for variable engagement conditions. SH725 coated carbide grade Rhombic 06 form, 80° included angle 0.2 mm nose radius for fine surface finish Cylindrical hole with one‑side countersink for secure clamping Reliable edge stability for repeatable turning results The insert combines the SH725 coated carbide grade with a compact rhombic geometry to provide stable cutting edges even under changing engagement conditions. The fine 0.2 mm nose radius contributes to improved surface quality on small features while limiting cutting forces; this makes the component suitable for shops that require predictable tool life and reproducible results. The coating and substrate selection balance toughness and wear resistance, enabling a longer time between index changes and a more efficient production rhythm. Secure mounting and ISO‑compatible system design Compatibility with clamping systems is governed by form, clearance angle, tolerance class, fastening type, size and thickness. The rhombic 06 profile with an 80° included angle and a cylindrical hole with a one‑side countersink (40°–60°) ensures positive location and repeatable seating in conventional ISO holders. With a plate thickness of 2.38 mm, the insert works well in compact toolholders and back‑tapered bores; choosing the correct holder and tightening torque reduces vibration and supports consistent chip formation during turning operations. Broad application range and defined chip control This grade is designed as a tough, edge‑stable option for turning, particularly beneficial on smaller tools or when entry conditions vary. The single‑sided chipbreaker gives controlled chip segmentation, which assists in managing swarf in both external and internal operations. The ISO designation and the standardised geometry simplify tool selection in mixed‑material job shops, while the coated carbide substrate delivers a practical compromise between wear resistance and resistance to chipping for diverse steels and general turning tasks. Choose the Tungaloy SH725 grade for dependable edge life and consistent performance — contact Metav Werkzeuge for tailored recommendations and application support. Technical Data Article number: 6737242 SKU: 6737242-Tungaloy Manufacturer SKU: TUN6737242 Designation: CCGT060202 SH725 Tungaloy insert Material: Carbide Facts Size: 06 Thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Nose radius: 0.2 mm Special features Shape: rhombic Hole style: cylindrical hole + one‑side countersink (40°–60°) Grade/coating: SH725, coated carbide Chipbreaker: one‑sided Standard: ISO indexable turn‑insert Application: external and internal turning FAQ What materials is this insert suitable for machining? The SH725‑grade insert is optimised as a tough, edge‑stable option for general turning tasks; it is primarily intended for a wide range of steels and mixed workshop applications where chip control and edge robustness are required. How does the 0.2 mm nose radius affect surface finish? The 0.2 mm nose radius reduces local cutting pressure and helps achieve finer surface finishes on small profiles while maintaining acceptable tool life when using the SH725 coated carbide substrate. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle and fastening; the ISO rhombic CCGT form and the cylindrical hole with countersink ensure correct seating in standard ISO toolholders designed for 06‑size plates. Is the insert suitable for internal turning and small‑diameter operations? Yes, the compact thickness and rhombic geometry make the insert suitable for internal as well as external turning, particularly where smaller tools and changing entry conditions demand a stable cutting edge. How is chip control achieved with this plate? The one‑sided chipbreaker and the SH725 grade work together to produce controlled chip segmentation, supporting reliable evacuation of swarf and reducing the risk of entanglement during continuous turning cycles. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 060202 SH725 Wendeplatten - Tungaloy
Benefit from the SH725 coated carbide grade for stable cutting-edge performance and the rhombic 80° geometry with a 0.2 mm corner radius for precise turning; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CCGT060202 SH725 indexable insert for turning by Tungaloy — rhombic 80°, 0.2 mm radius The CCGT060202 SH725 is an ISO-standard rhombic indexable insert for turning, designed for stable edge life in variable machining conditions and compatibility with ISO toolholders. Coated carbide grade SH725 Rhombic 80° insert geometry 0.2 mm corner radius With cylindrical hole and countersink Single-sided chipbreaker Stable cutting performance for variable engagements The SH725 grade is a coated carbide formulation engineered for stable edge life, especially where small tools or changing engagement conditions are present. As an ISO-standard indexable insert, it offers predictable behaviour when paired with the correct holder: compatibility is determined by the insert form, 7° clearance angle, tolerance class, fastening, size and thickness. Choosing this grade reduces unexpected tool changes and supports a steady production rhythm, translating into measurable time savings and fewer interruptions to workflow. Geometry that enhances accuracy and surface quality A rhombic 80° geometry with a 0.2 mm corner radius delivers a balance between strength and finishing capability. The 2.38 mm thickness and the 7° clearance angle provide the rigidity required for consistent chip formation and dimensional control, while the small corner radius helps achieve finer surface finishes on bore and external profiles. This geometry is particularly advantageous for turning operations where repeatable edge contact and controlled cutting forces reduce rework and downstream inspection requirements. Practical mounting and effective chip control The insert is supplied with a cylindrical hole and countersink (40°–60°) to secure positive clamping in common ISO-compatible toolholders. The single-sided chipbreaker directs chips away from the cutting zone, improving evacuation and reducing the risk of re-cutting. In a typical system setup the insert is combined with a matched external holder or boring bar, a supporting shim or clamping set and replacement screws; this configuration ensures repeatable seating and quick insert changes to keep machines running. Application guidance and economic benefits Designed for general turning, including both external and internal operations, the grade and chipbreaker selection should be matched to the workpiece material, cutting strategy and machine rigidity. For shops adopting the insert in mixed production, SH725 offers good versatility: it extends tool life under variable conditions and lowers per-part tooling costs through predictable wear behaviour. The result is improved process reliability and a leaner tooling inventory without sacrificing surface quality. For tailored advice on using the SH725 grade insert or to secure supply from Metav Werkzeuge, contact Metav Werkzeuge GmbH via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide application support and fast delivery options Technical data Article number: 6932698 Manufacturer SKU: TUN6932698 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Product name: CCGT060202 SH725 Tungaloy-Wendeplatte Facts Included angle: 80° Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Size: 06 ISO designation: 060202 Manufacturer article number: 6932698 Special features Coated carbide grade SH725 Rhombic insert geometry Single-sided chipbreaker With cylindrical hole and one-sided countersink (40°–60°) Intended application: turning Compatibility with ISO toolholders (form, clearance, tolerance, fastening, size, thickness) FAQ What toolholders are compatible with this insert? The CCGT060202 SH725 Tungaloy indexable insert (SKU 6932698-Tungaloy) is ISO-compatible; compatibility depends on insert form, clearance angle, tolerance class, fastening, size and thickness — match these parameters to the holder specification. For which operations is this grade best suited? The SH725 grade is intended for turning operations, including external and internal turning; it performs well in settings with small tools or variable engagement conditions. How does the chipbreaker affect machining? The single-sided chipbreaker on the CCGT060202 SH725 insert directs chips away from the cutting zone, improving evacuation and reducing the risk of re-cutting, which benefits surface finish and tool life. What does the 0.2 mm corner radius mean for finish and strength? A 0.2 mm corner radius balances edge strength with the ability to produce finer surface finishes; it helps control cutting forces while maintaining acceptable robustness for many turning tasks. Is the insert supplied with mounting features for secure clamping? Yes — the insert includes a cylindrical hole with a one-sided countersink (40°–60°) to ensure secure clamping in compatible ISO toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 SH725 Wendeplatten - Tungaloy
Take advantage of a tough, edge‑stable grade and ISO compatibility for consistent turning results; the combination of SH725 coated carbide and a 0.2 mm nose radius ensures stable cutting conditions and reliable surface quality. Order the insert through Metav Werkzeuge or consult our specialists for application advice. CCGT060202 SH725 turning insert by Tungaloy — ISO turning grade for turning The CCGT060202 SH725 is an ISO‑standard rhombic turning insert designed for external and internal turning; compatibility with a suitable holder depends on form, clearance angle, tolerance class, fastening, size and thickness. ISO rhombic insert, size 06 Coated cemented carbide SH725 0.2 mm nose radius for precise finishes 7° clearance with central hole and countersink Consistent cutting performance for productive turning The SH725 grade is a coated cemented carbide engineered for toughness and cutting‑edge stability, which translates into longer tool life under varying engagement conditions. With a focus on reproducible machining, the insert supports steady metal removal rates and reduces the need for frequent index changes. The combination of a durable grade and a defined chip control geometry helps maintain throughput and lowers unplanned downtime in batch and single‑piece production. Reliable seating and predictable clamping Designed to ISO dimensions, the insert features a rhombic outline with an 80° main angle and a 7° clearance. The plate thickness of 2.38 mm and the central cylindrical hole with a one‑side countersink (40°–60°) ensure secure fastening and repeatable seating in compatible holders. A 0.2 mm nose radius and a single‑sided chipbreaker support accurate positioning and consistent contact conditions, which simplifies tool selection and fixture adjustment for stable turning operations. Practical application range and machining benefits Suitable for both external and internal turning, the insert performs well when a tough, edge‑stable grade is required, particularly on smaller tool bodies or when engagement varies. The defined geometry aids in achieving improved surface quality while allowing sensible machining parameters to be selected; pairing the insert’s SH725 grade with a matching chipbreaker and holder leads to predictable wear behaviour and consistent component quality. For technical guidance on matching chipformer and grade to the workpiece and process stability, application advice is available. Contact Metav Werkzeuge today to discuss the CCGT060202 SH725 grade and receive tailored recommendations for holder compatibility and machining strategy Technical data Article number: 6737128 Manufacturer SKU: TUN6737128 Brand: Tungaloy Designation: CCGT060202 SH725 Material: cemented carbide Coating/grade: SH725 Application: turning Facts Size: 06 Main angle: 80° Clearance angle: 7° Nose radius: 0.2 mm Thickness: 2.38 mm Special features ISO‑standard turning insert Rhombic plate form Single‑sided chipbreaker Cylindrical hole with one‑side countersink (40°–60°) Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What makes this grade suitable for variable engagement turning? The CCGT060202 SH725 insert from Tungaloy uses a tough, edge‑stable coated carbide grade that resists chipping and provides consistent cutting behaviour when engagement changes, improving process reliability. How does the hole and countersink affect mounting stability? The cylindrical hole with a one‑side countersink (40°–60°) enables secure clamping and repeatable seating, which helps the insert maintain correct orientation and minimise vibration during turning. Can this insert achieve fine surface finishes? Yes; the 0.2 mm nose radius combined with the SH725 grade and chipbreaker geometry supports improved surface quality when cutting parameters are selected appropriately. Is the insert compatible with standard ISO holders? Yes; the insert follows ISO dimensions, but final compatibility depends on matching holder form, clearance angle, tolerance class, fastening and thickness to the insert specification. Is the insert suitable for both external and internal turning? The design and geometry of this insert make it appropriate for both external and internal turning applications, provided the correct chipbreaker and holder configuration are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 SH725 Wendeplatten - Tungaloy
Take advantage of a tough, wear-resistant SH725 coating on a precisely dimensioned insert to secure consistent tool life and repeatable set-up; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and application advice. CCGT 060202 SH725 — ISO turning insert (CCGT) by Tungaloy, rhombic 80° CCGT 060202 SH725 is an ISO‑format indexable insert designed for precision turning applications, offering a tough coated carbide grade and geometry suited to small tools and variable engagement. Coated carbide grade SH725 Rhombic insert with 80° cutting angle Single-sided chipbreaker design Cylindrical hole with one-sided countersink Reliable performance for productive turning The combination of the SH725 coating and a coated carbide substrate gives the insert a balance of toughness and edge stability that favours productive turning. This grade is formulated to withstand fluctuating engagement conditions and to maintain a stable cutting edge, especially beneficial when using compact toolholders or when intermittent cutting depths occur. The result is improved process reliability and longer intervals between index changes, supporting continuous production goals. Precise geometry for fast set-up and consistent results Geometry and dimensions are critical for repeatable positioning and surface quality: the rhombic shape with an 80° cutting angle ensures versatile approach angles, while the 0.2 mm corner radius and 7° clearance angle secure predictable chip formation and frontal strength. A plate thickness of 2.38 mm and standard ISO designation (ISO 060202) support compatibility checks with holders where form, clearance angle, tolerance class, fastening, size and thickness determine fit. The insert’s cylindrical hole with one-sided countersink (40°–60°) enables secure clamping and straightforward replacement. Controlled chips and adaptable application choices The single-sided chipbreaker is optimised for conventional turning operations; it aids chip control and reduces the risk of entanglement in interrupted cuts. Selection of the chipbreaker and the insert grade should align with workpiece material and machining strategy: choose the breaker suited to the component’s machinability and the intended cutting parameters. This approach delivers cleaner surfaces, safer machining, and a favourable economy of tool use—particularly when frequent tool changes are impractical. For demanding or changing engagements, this insert’s combination of geometry and SH725 wear resistance provides a dependable foundation for machining cycles. For application advice or availability regarding Tungaloy SH725 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored holder compatibility and selection support. Technical data Article number: 6737001 Manufacturer SKU: TUN6737001 Model series: ISO‑Drehwendeschneidplatten Material: Carbide ISO designation: CCGT060202 Grade: SH725 Facts Cutting angle: 80° Clearance angle: 7° Corner radius: 0.2 mm Thickness: 2.38 mm Size: 06 Special features Rhombic plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Suitable for turning applications Compatible holder determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What machining operations is this insert intended for? This insert is intended for turning operations; the ISO‑format CCGT060202 SH725 indexable insert is optimised for external and internal turning tasks. Which properties define the SH725 grade? The SH725 grade is a tough, edge‑stable coated carbide formulated for reliable cutting performance under varying engagement conditions and for use in smaller tools. How is the insert fastened in the holder? The CCGT 060202 insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for secure clamping; correct holder compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness. What are the key dimensions to check when selecting a holder? Check the ISO designation, thickness (2.38 mm), corner radius (0.2 mm), clearance angle (7°) and plate form (rhombic) when matching the insert to a holder. Is the insert coated? Yes, the CCGT060202 SH725 insert is manufactured from coated carbide, combining a wear‑resistant coating with a tough substrate for improved tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a tough, coated cemented carbide grade, precise ISO geometry and reliable chip control to keep turning operations productive and repeatable; order directly via Metav Werkzeuge or consult our experts for fitment and optimisation. CCGT 060202 SH725 indexable insert for turning by Tungaloy — coated cemented carbide, 0.2 mm radius CCGT060202 SH725 Tungaloy indexable insert designed for ISO‑compliant turning applications, offering a robust cutting edge and predictable chip behaviour for both external and internal turning tasks. ISO‑compliant rhombic insert Coated cemented carbide SH725 0.2 mm corner radius for fine finishing With hole and single‑side chipbreaker Stable cutting behaviour that raises process reliability The SH725 coating grade is formulated for a tough, cutting‑edge‑stable performance in turning operations, especially where small toolholders or variable engagement occur. The coated cemented carbide substrate provides a balance between wear resistance and fracture toughness, which reduces unplanned tool changes and maintains component quality. Predictable chip formation from the one‑sided chipbreaker improves surface results and lowers risk of rework, delivering a measurable improvement in cycle consistency and throughput. Precise geometry for flexible holder compatibility This ISO indexable insert follows standard interface rules so compatibility with a clamping system is defined by form, relief (7°), tolerance class, fastening method, nominal size and thickness. The rhombic shape, 06 designation, 2.38 mm thickness and a 0.2 mm corner radius give a compact profile suitable for many external and internal turning stations. The insert includes a central hole with a cylindrical bore and a single‑side countersink (40°–60°), enabling secure mounting with a matching screw and clamp set. Clear, repeatable seating reduces vibration and contributes to a consistent cutting edge engagement. Versatile use and measurable cost effectiveness on the shop floor Designed as part of an ISO indexable system, this insert supports a wide range of turning operations when the correct chipbreaker and grade are selected for the workpiece and machine stability. Typical applications include both external and internal turning where surface finish and tool life matter. The combination of grade durability and predictable chip control reduces downtime and tooling costs over production runs, while the standardised geometry simplifies tool inventory and holder selection for faster set‑ups. For tailored advice on integrating the Tungaloy CCGT 060202 SH725 inserts into existing toolholders and to place an order, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our technical team will recommend the optimal chipbreaker and clamping components. Technical data Article number: 6737000 Manufacturer SKU: TUN6737000 Our SKU: 6737000-Tungaloy Core specifications Insert designation: CCGT060202 Size: 06 Corner radius: 0.2 mm Thickness: 2.38 mm Relief angle: 7° Included angle: 80° Hole: cylindrical hole + single‑side countersink (40°–60°) Materials & special features Material: cemented carbide Coating / grade: SH725 (coated cemented carbide) Chipbreaker: one‑sided Shape: rhombic Application: turning (external and internal) Model series: ISO indexable turning inserts Compatibility: determined by form, relief, tolerance class, fastening, size and thickness FAQ What turning tasks is this insert suitable for? The CCGT 060202 SH725 insert is intended for both external and internal turning operations where a stable cutting edge and good chip control are required. How is compatibility with the toolholder ensured? Compatibility depends on the insert form, relief angle (7°), tolerance class, fastening type, nominal size (06) and thickness (2.38 mm); match the holder to these parameters for secure clamping. What benefits does the SH725 grade provide? The SH725 coated grade offers a tough, cutting‑edge‑stable characteristic that supports longer life and fewer edge failures, particularly helpful when using smaller tools or under variable engagement conditions. How does the chipbreaker influence machining? The single‑side chipbreaker on this insert produces predictable chip forms, which aids evacuation, improves surface finish and reduces the likelihood of chip interference in continuous turning. Is this insert suitable for fine finishing operations? With a 0.2 mm corner radius and a coated cemented carbide substrate, the insert is appropriate for finishing passes where a combination of edge integrity and surface quality is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 060202 SH730 Wendeplatten - Tungaloy
Benefit from a combination of SH730 coated carbide for robust cutting edges, a compact 0.2 mm corner radius for precise profiles and an ISO‑standard geometry that ensures compatibility with common holders; order via Metav Werkzeuge or consult the technical team for tailored recommendations. CCGT 060202 SH730 indexable turning insert for turning — Tungaloy A CCGT060202 SH730 indexable insert engineered for external and internal turning, offering a compact rhombic form with a 7° relief angle for stable, repeatable machining. ISO CCGT060202 geometry Coated carbide grade SH730 0.2 mm corner radius Rhombic plate, 7° relief angle Stable edge performance for mixed engagement conditions The SH730 grade is a coated carbide developed for edge stability and toughness, which delivers consistent performance under varying engagement and cutting forces. This behaviour reduces the risk of premature chipping when machining interrupted cuts or when tool overhang varies. The combination of the 0.2 mm corner radius and the one-sided chipbreaker supports controlled chip formation and contributes to reliable surface quality, while the hardened substrate increases resistance to mechanical and thermal loads. ISO geometry and mounting for predictable toolset integration Featuring the ISO designation 060202 in a CCGT form, the insert matches established holder standards; compatibility is determined by form, relief angle, tolerance class, fastening and thickness. The rhombic 06 size and 2.38 mm plate thickness fit compact external holders and boring bars, while the cylindrical hole with single-sided countersink (40°–60°) secures the insert in common clamping systems. Specifying the correct holder and torque ensures repeatable seating and optimal face contact, translating to stable cutting conditions and reproducible results. Operational advantages: productivity, surface finish and tool life Adopting this grade and geometry yields measurable productivity benefits: longer periods between index changes, more consistent part finish and dependable tool life in short‑run and mixed‑batch environments. The coated surface of the SH730 grade reduces built‑up edge and improves wear resistance, enabling higher effective cutting lengths in many steels and mixed materials. Selecting the appropriate chipbreaker and cutting parameters allows shops to balance material removal rates with surface integrity for efficient throughput. Practical guidance and selection criteria When choosing an insert for turning, match the chipbreaker and grade to material, feed and depth of cut to exploit the SH730 strengths; tougher grades suit interrupted cuts and unstable setups, while finer geometries favour precision finishing. Corner radius influences profile sharpness and stress concentration; the 0.2 mm radius here is a compromise between edge strength and the ability to produce defined contours. For unfamiliar setups, refer to holder compatibility and confirm clearance angles—this reduces rework and shortens process ramp‑up times. Contact Metav Werkzeuge for personalised tool matching and availability—email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed cutting data and ordering information Technical Data Article number: 6854010 Manufacturer SKU: TUN6854010 SKU: 6854010-Tungaloy Model series: ISO turning inserts ISO designation: 060202 Facts Corner radius: 0.2 mm Plate thickness: 2.38 mm Relief angle: 7° Insert angle: 80° Plate size: 06 Special features Material: carbide Grade/coating: SH730 Chipbreaker: one-sided Plate form: rhombic Hole: cylindrical with single-sided countersink 40°–60° Application: turning Compatible with ISO holders FAQ What materials is this insert suitable for? The SH730‑grade insert is a coated carbide designed to offer toughness and edge stability; it is suitable for a broad range of steels and mixed workpiece conditions when using the CCGT060202 insert. How does the 0.2 mm corner radius affect machining? A 0.2 mm corner radius provides a balance between edge strength and profile definition, helping to reduce chipping while maintaining the ability to produce defined external and internal contours with the insert. Is the insert compatible with standard ISO holders? Yes, the CCGT 060202 geometry follows ISO norms; compatibility depends on holder form, fastening and thickness—verify holder specifications against the ISO designation before mounting. What is the purpose of the cylindrical hole with countersink? The hole with a single‑sided countersink (40°–60°) secures the insert reliably in clamping systems, improving seating consistency and repeatable positioning for stable cutting performance. Can this insert be used for both roughing and finishing? The coated SH730 grade and the one‑sided chipbreaker make the insert versatile; it can be applied to a range of feeds and depths, but final selection of chipbreaker and cutting data should match the intended roughing or finishing operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated carbide TH10 grade and a compact 0.2 mm corner radius for precise, low-force turning of non-ferrous parts; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CCGT 060202 TH10 ISO turning insert for turning — Tungaloy The CCGT060202 TH10 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a sharp uncoated carbide edge optimised for non‑ferrous materials and low cutting forces. ISO‑standard indexable geometry Uncoated carbide for low cutting forces Rhombic 80° insert with 0.2 mm radius Single‑sided chipbreaker, with hole Precise cutting with a sharp uncoated grade for cleaner surfaces The insert is manufactured in an uncoated carbide composition and the TH10 grade targets tasks where a sharp edge and low cutting forces improve surface quality, particularly on aluminium and other non‑ferrous materials. An uncoated cutting edge reduces built‑up edge and supports fine finishing passes; at the same time the 0.2 mm corner radius balances edge strength with the ability to obtain tight profiles. For customers seeking predictable surface finish and minimal burr formation, this specification gives a measurable advantage in cycle‑time reduction and downstream processing. Predictable fit in ISO tool systems improves shop flexibility As an ISO‑standard insert, compatibility depends on the insert’s form, 7° relief angle, tolerance class, fixation, size and thickness. The rhombic geometry with an 80° included angle ensures secure seating in a wide range of external holders and boring bars, simplifying inventory and changeovers. Because the system approach uses standardised dimensions, the insert enables fast replacement and repeatable positioning, which supports lean workflows and reduces machine downtime during tool swaps. Practical features that boost productivity in turning operations The insert’s single‑sided chipbreaker is intended to control chip form for turning and to suit typical feed ranges in general turning tasks. A cylindrical hole with a one‑sided countersink (40°–60°) allows secure clamping and stable heat dissipation at the cutting edge. With a plate thickness of 2.38 mm and size designation 06, the geometry supports both finish and light to medium roughing operations when matched with an appropriate holder and cutting parameters. For best results, select the chipbreaker and grade to match workpiece material and machine rigidity. For ordering and tailored recommendations on Tungaloy TH10 turning inserts contact Metav Werkzeuge for availability and application guidance: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6801286 SKU: 6801286-Tungaloy Manufacturer SKU: TUN6801286 Model series: ISO-Drehwendeschneidplatten Label: CCGT060202 TH10 Tungaloy‑Wendeplatte Designation: CCGT060202 Grade: TH10 Material: Hartmetall Manufacturer: Tungaloy Facts Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Thickness: 2.38 mm Size: 06 Hole style: cylindrical hole + one‑sided countersink (40°–60°) Design and special features Rhombic insert geometry Uncoated cemented carbide cutting edge Single‑sided chipbreaker ISO‑standard indexable insert Cylindrical hole with 40°–60° countersink Compatible with external holders and boring bars Suited to external and internal turning; choose chipbreaker and grade to match material FAQ What materials is this insert best suited for? The TH10 uncoated grade is optimised for non‑ferrous materials; the CCGT060202 TH10 insert provides low cutting forces and clean surfaces on aluminium and similar alloys. Is this insert compatible with standard ISO tool holders? Yes, the insert follows ISO geometry; compatibility is determined by form, relief angle (7°), tolerance class, fixation, size and thickness, so it seats reliably in ISO‑compliant external holders and boring bars. Which chipbreaker should be chosen for finishing vs roughing? For finishing, select the single‑sided chipbreaker that favours tight chip control and surface finish; for heavier cuts, a more robust chipbreaker and suitable feeds should be used to maintain edge life. How does the 0.2 mm corner radius affect performance? A 0.2 mm radius offers a compromise between edge strength and ability to produce sharp contours; it helps reduce stress concentration while allowing high‑quality surface finishes in finishing passes. What does the hole and countersink design provide? The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure clamping and accurate seating, improving repeatability and stability during turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 060202 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated cutting edge and low cutting forces for consistent, clean turning of non-ferrous materials; order directly via Metav Werkzeuge or consult our advisers for application-specific guidance. CCGT 060202 TH10 indexable turning insert for turning — Tungaloy CCGT 060202 TH10 is an ISO‑standard indexable insert designed for external and internal turning of non‑ferrous materials and applications where a low cutting force and clean surface finish are required ISO‑standard rhombic insert 80° angle Uncoated carbide grade TH10 for low cutting forces Single‑sided chipbreaker for clean surface finish Cylindrical hole with one‑side countersink 40°–60° Reliable performance for non‑ferrous turning and low‑force operations The uncoated carbide construction combined with the TH10 grade delivers a reliably sharp cutting edge that reduces cutting forces and supports superior surface quality when machining non‑ferrous alloys. The single‑sided chipbreaker controls chip formation without compromising the edge geometry, which is particularly advantageous in light‑duty finishing passes where low cutting forces and minimal burring are priorities. For shops aiming to maintain steady cycle times while protecting delicate workpieces, this insert offers a pragmatic balance between productivity and finish quality. Clear guidelines for holder compatibility and secure clamping Compatibility with a toolholder is determined by form, clearance angle (7°), tolerance class, fastening method, size and thickness. The rhombic geometry with an 80° included angle and a 0.2 mm corner radius suits a wide range of standard holders; the design includes a cylindrical hole with a one‑side countersink (40°–60°) to ensure positive location and repeatable clamping. When assembling the system, pair the insert with a matching outer holder or boring bar, and use the appropriate shim/clamp set and replacement screws to secure consistent seat contact and repeatable results. Material properties and edge behaviour explained for practical selection Made from carbide, the insert is intentionally uncoated to preserve a keen edge for materials that benefit from low adhesion and minimal built‑up edge, such as aluminium alloys and certain non‑ferrous composites. The nominal thickness of 2.38 mm gives sufficient edge strength for light to medium cuts while the 0.2 mm nose radius balances edge stability and surface finish. For operations that demand higher thermal or adhesive resistance, users may select a coated alternative, but where cutting force reduction and surface cleanliness are the priority, this configuration is particularly effective. Process reliability and shop‑floor advantage Integrating ISO‑standard inserts simplifies inventory and holder interchangeability across machines, reducing setup time and stock complexity. The combination of a standard form factor, defined tolerance characteristics, and an established chip control geometry supports predictable behaviour at varying feed rates and depths of cut. Shops focused on repeatable finishing, short batch runs or mixed‑material work will appreciate the straightforward specification and the practical advantages in everyday turning tasks. Contact Metav Werkzeuge for availability, application advice and technical guidance on selecting the right holder and clamping set for this Tungaloy indexable insert Technical data Article number: 6801281 Manufacturer SKU: TUN6801281 Model series: ISO‑turning indexable inserts Material: carbide Grade: TH10 Shape: rhombic Size: 06 Nose radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Hole: with hole Hole style: cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: single‑sided Application: turning FAQ What materials is this insert best suited for? The TH10 uncoated carbide grade is optimised for non‑ferrous materials and situations requiring low cutting forces; the insert performs well on aluminium alloys and similar workpiece materials. How does the single‑sided chipbreaker affect machining? The single‑sided chipbreaker on this indexable insert promotes controlled chip formation and cleaner surface finish during finishing passes, reducing the risk of edge build‑up. Which holders are compatible with this insert? Compatibility depends on form, 7° clearance, tolerance and thickness; use ISO‑compatible holders sized for a CCGT 060202‑form insert and ensure correct shim and clamping hardware are used. Is the insert coated? This insert is uncoated, providing a sharp edge and lower cutting forces; for higher wear resistance or abrasive materials, a coated alternative should be considered. What is the recommended use for the 0.2 mm nose radius? A 0.2 mm nose radius strikes a balance between surface finish and edge strength, making it suitable for fine finishing passes and light to moderate turning operations. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 060202 TH10 Wendeplatten - Tungaloy
Take advantage of the sharp, universal TH10 grade and the predictable clamping geometry to achieve low cutting forces and consistent surface quality; order the insert directly via Metav Werkzeuge or contact our consultants for holder compatibility and application advice. CCGT 060202 TH10 — Turning insert for ISO turning applications (Tungaloy) The CCGT060202 TH10 is an ISO-standard turning insert designed for external and internal turning where a sharp, uncoated carbide grade and a controlled chipformer support low cutting forces and clean surface finishes ISO rhombic 80° geometry Sharp TH10 uncoated carbide grade Single-sided chipbreaker for chip control 0.2 mm corner radius for fine finishing Engineered for consistent, low‑force cutting The TH10 grade is an uncoated carbide developed as a sharp, universal option for machining non-ferrous materials and operations that benefit from minimal cutting resistance. With a finely prepared cutting edge, the insert reduces cutting forces and helps to achieve a clean surface finish without reliance on coating layers. This characteristic makes the insert a practical choice for high-feed finishing passes and situations where lower cutting temperatures and less built-up edge improve process stability. The combination of edge geometry and material supports reliable productivity and predictable tool behaviour in medium- to high-volume machining. Secure clamping and ISO compatibility for repeatable results Manufactured to the ISO-standard model series for turning plates, the insert’s compatibility with holders is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The rhombic 06 format with an 80° included angle, 7° clearance angle and 2.38 mm thickness provides a stable seating in suitable external holders or boring bars. The plate is supplied with a hole featuring a cylindrical hole plus a single-sided countersink (40°–60°) to match common screw-clamping systems, ensuring repeatable positioning and quick indexable changes for uninterrupted production. Flexible chip control and reliable finishing performance A single-sided chipbreaker on the cutting edge supports efficient chip formation across a range of feed rates, while the 0.2 mm corner radius allows for fine finishing where surface quality matters. The insert belongs to the ISO turning inserts family and is intended for both external and internal turning tasks; choice of chipformer and grade should be matched to the workpiece material and the operation’s rigidity for optimal results. Where a clean edge and low cutting effort are priorities, this sharp, uncoated option provides a straightforward, economical approach to achieve the required part tolerance and surface specification. For application advice or to confirm holder compatibility for Tungaloy TH10 inserts, contact Metav Werkzeuge: email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply or technical consultation Technical data Article number: 6801282 Manufacturer SKU: TUN6801282 SKU: 6801282-Tungaloy Designation: CCGT060202 TH10 Manufacturer: Tungaloy Core data Size: 06 Geometry: rhombic, 80° included angle Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 7° Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Special features Material: uncoated carbide Grade: TH10, sharp universal for non-ferrous materials Chipbreaker: single-sided Series: ISO turning inserts Typical use: external and internal turning System build: insert, holder/boring bar, shim/clamp set, spare screws FAQ Is this insert suitable for aluminium and other non-ferrous materials? The CCGT060202 TH10 from Tungaloy is optimised for non-ferrous materials and applications where a sharp, uncoated edge provides low cutting forces and improved surface finish. What holder features are required for correct seating of the insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and plate thickness; the 80° rhombic form and cylindrical hole with countersink match common ISO clamping systems. Can this insert be used for both external and internal turning? Yes, the insert is intended for both external and internal turning within the ISO turning inserts system, provided the chosen holder or boring bar matches the plate geometry. How does the chipbreaker affect machining performance? The single-sided chipbreaker on this insert promotes controlled chip formation across a range of feeds, improving process security and helping to avoid irregular chip shapes during turning. What finish can be expected with the 0.2 mm corner radius? A 0.2 mm corner radius supports fine finishing passes and contributes to a consistent surface quality when paired with appropriate feeds and speeds for the workpiece material. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 TH10 Wendeplatten - Tungaloy
Take advantage of the insert’s combination of an uncoated carbide TH10 grade and an 80° rhombic geometry for reliable, low-force turning of non-ferrous materials; the precise 0.2 mm corner radius and secure clamping design ensure consistent surface quality and repeatable seating. Order the insert directly via Metav Werkzeuge or consult our advisors for compatibility checks. CCGT 060202 TH10 ISO turning insert, rhombic 80° — Tungaloy A CCGT 060202 TH10 ISO-standard rhombic insert for external and internal turning, designed for low cutting forces and clean surface finishes in non‑ferrous applications. ISO rhombic insert, 80° geometry Uncoated carbide TH10 for low cutting forces 0.2 mm corner radius for fine finishing Single-sided chipbreaker with centring hole Consistent cutting with a sharp universal grade The TH10 grade is an uncoated carbide formulation tailored as a sharp, universal option where reduced cutting forces and clean surfaces are required. In practice, this means reduced tool engagement forces during turning of non‑ferrous components, which helps to maintain machine stability and supports better surface appearance on the workpiece. The one‑sided chipbreaker assists in predictable chip formation, reducing the risk of long, stringy chips that can impair process reliability. This combination of grade and geometry is particularly valuable where small cutting forces and clean chip evacuation are decisive for production quality. Geometry that delivers repeatable seating and accuracy The rhombic shape with an included angle of 80° and a 0.2 mm corner radius provides a balance between strength and precision: the small radius supports fine surface finishes, while the geometry maintains sufficient edge support for stable cuts. The insert’s cylindrical hole with a single‑side countersink (40°–60°) ensures positive seating in standard ISO clamping systems; the defined seating and the 2.38 mm plate thickness contribute to repeatable positioning and reduced micro–movement during cutting. Because the insert conforms to the ISO system, interchangeability with matching holders is straightforward when form, clearance angle, tolerance class, fastening style, size and thickness are observed. Practical system integration and recommended applications This ISO turning insert forms part of a simple system: insert plus a suitable external holder or boring bar, a backing/clamping set and the correct replacement screws. The uncoated carbide construction makes this grade well suited to non‑ferrous materials and other situations where a sharp edge and low cutting forces are beneficial. For best results, match the single‑sided chipbreaker and grade to the specific workpiece material, machining method and machine stability. If compatibility with a specific holder or the optimal chipbreaker geometry is uncertain, Metav Werkzeuge’s technical advisers are available to assist with selection and setup recommendations. Contact Metav Werkzeuge today for expert selection of the Tungaloy CCGT 060202 TH10 insert for turning; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer: Tungaloy Manufacturer article number: 6801291 SKU: 6801291-Tungaloy Article designation: CCGT060202 TH10 Core specifications ISO code: 060202 Insert size: 06 Corner radius: 0.2 mm Clearance angle: 7° Thickness: 2.38 mm Included angle: 80° Features / Applications Material: uncoated carbide Shape: rhombic Chipbreaker: one-sided Hole: cylindrical hole with single-side countersink (40°–60°) Application: external and internal turning Series: ISO turning inserts Grade: TH10 — sharp universal grade for non‑ferrous materials FAQ Which materials is this insert intended for? The Tungaloy CCGT 060202 TH10 insert is intended primarily for non‑ferrous materials and similar applications where an uncoated, sharp cutting edge produces low cutting forces and clean surfaces. How does the insert secure in the holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) that provides reliable centring and clamping in ISO holders; compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness. What benefit does the 0.2 mm corner radius provide? A 0.2 mm corner radius supports fine surface finishes and controlled edge engagement, making the insert suitable where improved surface quality and precise dimensional control are priorities. When should the TH10 grade be chosen over coated grades? The TH10 uncoated grade is the choice when low cutting forces and a sharp edge are required, for example with non‑ferrous workpieces or where coated edges might increase cutting resistance and impair finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 060202 TH10 Wendeplatten - Tungaloy
Benefit from a combination of low cutting forces, clean surface finish and ISO compatibility to maintain stable, productive turning operations; order the CCGT060202 TH10 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application matching. CCGT060202 TH10 Tungaloy — CCGT 060202 turning insert for Drehen (turning) The CCGT060202 TH10 Tungaloy insert is an ISO-standard rhombic turning insert designed for external and internal turning, optimised for non‑ferrous materials and applications that require a sharp, uncoated cutting edge. ISO rhombic insert, 80° included angle Uncoated carbide TH10 for low cutting forces 0.2 mm corner radius for fine surface finish Cylindrical hole with 40°–60° countersink Proven productivity for non‑ferrous turning The TH10 grade is an uncoated carbide formulation developed to keep cutting forces low and to produce a clean surface finish on aluminium, brass and similar non‑ferrous alloys. Used in combination with a suitable holder and clamping set, the insert supports higher metal removal rates where chip control and low contact temperatures are important. The geometry and grade reduce built‑up edge formation and help preserve tool life when machining softer materials, which leads to fewer interruptions and a more predictable production flow. ISO conformity and straightforward tool matching As an ISO standard insert, the seating and interchangeability with holder systems are determined by the insert form, relief angle, tolerance class, fastening method, size and thickness. The rhombic plate form and 7° relief align with common ISO holders, while the 2.38 mm thickness provides the necessary support for stable turning. This conformity simplifies tool planning for workshops and production lines, enabling rapid replacement and consistent component quality across different machines. Geometry and clamping features that enhance process stability The insert’s 80° included angle and 0.2 mm corner radius combine to offer a balance between strength and finishing capability: the geometry resists deflection on longer overhangs yet still permits fine edge engagement for improved surface roughness. The single‑sided chipbreaker facilitates controlled chip formation on relevant feeds, and the cylindrical hole with one‑side countersink (40°–60°) ensures secure clamping and accurate seating in compatible toolholders. These design details reduce vibration and improve repeatability in serial production. Practical selection and application guidance Select the chipbreaker and grade to match the workpiece material, machining strategy and fixture rigidity: for non‑ferrous components the TH10 uncoated grade and the specified chipbreaker are often the preferred starting point. The typical system consists of the ISO insert, a matching external holder or boring bar, a backing pad/clamp set and replacement screws. For mixed‑material shops or changing component geometries, modest trials with adjusted feeds and speeds will quickly show whether the combination leads to the desired balance of productivity and surface quality. For procurement or technical matching of the Tungaloy TH10 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and fast supply Technical data Article number: 6801288 Manufacturer SKU: TUN6801288 Item label: CCGT060202 TH10 Tungaloy insert Manufacturer: Tungaloy Core specifications Corner radius: 0.2 mm Relief angle: 7° Included angle: 80° Plate thickness: 2.38 mm Plate size: 06 ISO code: 060202 Special features Uncoated carbide grade TH10 Single‑sided chipbreaker Rhombic plate form Cylindrical hole + one‑sided countersink (40°–60°) Designed for external and internal turning ISO‑standard turning indexable insert FAQ What materials is this insert optimised for? The CCGT060202 TH10 Tungaloy insert is optimised for non‑ferrous materials such as aluminium and brass, where the uncoated TH10 grade gives low cutting forces and good surface finish. How does the TH10 grade affect cutting performance? The TH10 uncoated carbide provides a sharp cutting edge that reduces built‑up edge and cutting forces, delivering cleaner finishes and consistent results when using the CCGT060202 insert in appropriate turning applications. What does the ISO designation 060202 indicate? The ISO code 060202 denotes the insert size and geometry; for the CCGT060202 this relates to the plate dimensions, shape and tolerance that determine compatible holders and clamping. Can this insert be used for internal turning? Yes, the CCGT060202 TH10 Tungaloy insert is suitable for both external and internal turning, provided the chosen holder and setup offer the required rigidity and clearance. Which clamping features ensure repeatable seating? The cylindrical hole with a one‑sided countersink (40°–60°) on the CCGT060202 insert provides secure clamping and accurate seating when paired with compatible clamps and screws. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 060202 TH10 Wendeplatten - Tungaloy
Benefit from a low‑force cutting edge and clean surface finish combined with ISO compatibility and a compact rhombic geometry; these qualities support efficient turning operations and predictable tool life. Order the CCGT060202 TH10 insert directly via Metav Werkzeuge or consult our specialists for application‑specific guidance. CCGT 060202 TH10 — Indexable turning insert by Tungaloy for precision external and internal turning with 7° clearance CCGT060202 TH10 Tungaloy‑Wendeplatte — an ISO‑standard rhombic insert designed for turning applications where low cutting forces and fine surface finish are required; suitable for non‑ferrous materials and light finishing cuts. ISO‑standard rhombic geometry, size 06 Uncoated cemented carbide for low cutting forces 7° clearance angle for reduced rubbing Single‑sided chipbreaker for clean chip formation Low cutting forces and improved surface quality for finishing cuts The uncoated cemented carbide grade TH10 is designed to provide a sharp, universal cutting edge that reduces cutting forces and supports a cleaner surface finish in non‑ferrous machining and other suitable applications. The combination of a fine 0.2 mm corner radius and a single‑sided chipbreaker reduces push‑off and smearing on softer materials, which is especially useful in finishing passes. For customers less familiar with insert geometry: a smaller nose radius gives finer contours and lower cutting loads, while the chipbreaker helps control swarf and maintain consistent surface condition. Compatibility and mounting: how the insert fits into the system Compatibility with a toolholder depends on several matching parameters: the insert’s form, clearance angle (7°), tolerance class, attachment style, size (06) and thickness (2.38 mm). The CCGT shape accepts a cylindrical locating hole with a one‑sided countersink (40°–60°) for positive clamping stability. When assembling the system, ensure the holder accepts an ISO‑type rhombic insert with a central hole and the specified seating geometry; correct matching prevents edge chipping and keeps tool life predictable. Practical benefits in process planning and tool choice The compact rhombic form and modest insert thickness allow close control of radial engagement, making this insert a practical choice for both external and internal turning where access is limited. The TH10 uncoated grade favours applications that benefit from a sharp edge and reduced built‑up edge formation; this often translates into longer intervals between final touch‑ups and more consistent part quality. In production planning, select a chipbreaker and insert grade that correspond to workpiece material, cut depth and machine rigidity to balance productivity and surface tolerance. Selecting the right insert for the workpiece and machining strategy For non‑ferrous alloys and applications requiring low cutting pressure, the uncoated grade is advantageous because coatings can blunt the initial edge geometry and increase cutting force under some conditions. The 80° included angle and rhombic shape provide versatility: a stable cutting attitude with options to index for multiple edges. Where higher mechanical or thermal loads are present, consider alternative grades or geometries; for light finishing and precision turning, this style of insert offers an efficient and reliable solution. Contact Metav Werkzeuge for tailored recommendations on using Tungaloy turning inserts — our consultants can confirm holder compatibility and suggest feeds and speeds; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice Technical data Article number: 6801278 SKU: 6801278-Tungaloy Manufacturer SKU: TUN6801278 Manufacturer article number: 6801278 Model series: ISO‑Drehwendeschneidplatten Label: CCGT060202 TH10 Tungaloy‑Wendeplatte Core specifications Insert designation: CCGT060202 Size: 06 Corner radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Materials & special features Material: uncoated cemented carbide (TH10) Shape: rhombic Hole: cylindrical hole with one‑side countersink (40°–60°) Chipbreaker: single‑sided Application: turning (external and internal) System note: ISO‑type insert — compatibility based on form, clearance, tolerance, attachment, size and thickness FAQ What materials is this insert intended for? The CCGT060202 TH10 Tungaloy insert is optimised for non‑ferrous alloys and applications where a sharp, uncoated cutting edge reduces cutting forces and improves surface finish. How does the 0.2 mm nose radius affect the workpiece? A 0.2 mm corner radius on the Tungaloy insert gives finer surface contours and lower cutting loads, making it well suited to finishing passes and delicate profiles. Which holders are compatible with this ISO insert? Holders designed for ISO CCGT inserts with a size 06 seat, 2.38 mm thickness and a central locating hole with countersink will be compatible; ensure the holder matches the 7° clearance angle and tolerance class. Can this insert be used for roughing operations? The uncoated TH10 grade and small radius are primarily intended for low‑force finishing; for heavy roughing, a tougher geometry or a coated, wear‑resistant grade is recommended instead of this insert. What is the purpose of the single‑sided chipbreaker? The single‑sided chipbreaker on the insert helps form and control chips during turning, leading to more consistent swarf removal and improved surface quality on softer materials. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCGT 060202 UM 1105 Indexable Insert - Sandvik
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Product specifications CCGT 060202 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060202UM1105-SANDVIK Data & Figures: ISO-Code: CCGT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: 1105 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Sandvik. 40START indexable-inserts-CCGT-060202-1105-Sandvik 40END
CCGT 060202 UM 1115 Indexable Insert - Sandvik
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Information on technical features CCGT 060202 indexable inserts from Sandvik Brand: Sandvik Manufacturer Order Number: CCGT060202UM1115-SANDVIK Facts & Figures: ISO-Code: CCGT060202 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Grade: 1115 Chip Breaker: UM with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their rightful owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCGT-060202-1115-Sandvik 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com