Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT 09T302 J740 Wendeplatten - Tungaloy
Benefit from the combination of wear resistance from the J740 grade and precise geometry for consistent turning results; order directly via Metav Werkzeuge or consult our advisers for application-specific selection. CCGT 09T302 J740 – ISO rhombic turning insert (80°) by Tungaloy CCGT 09T302 J740 is an indexable turning insert developed for general external and internal turning, offering stable chip control and dependable cutting-edge performance. Wear-resistant J740 grade Rhombic insert with 80° cutting angle Cylindrical hole with 40°–60° countersink 0.2 mm nose radius for fine turning Stable machining through a wear-resistant grade The combination of the J740 cutting grade and a carbide substrate delivers high wear resistance and good edge stability for turning tasks. This behaviour reduces unexpected tool changes and supports steady productivity in repetitive operations. The J740 formulation balances hardness and toughness to resist flank wear while maintaining reliable cutting-edge integrity, which is particularly valuable in medium-duty turning where consistent component tolerance is required. Geometry designed for consistent surface quality The ISO rhombic shape with an 80° main cutting angle and a 0.2 mm nose radius produces a precise contact geometry that minimises vibration and improves finish on the workpiece. A small radius is suited to fine turning and detail work, limiting deflection and enabling closer tolerances. The insert thickness of 3.97 mm and the specified clearance angle of 7° ensure a stable seat in compatible holders, helping to maintain the intended cutting geometry throughout the tool life. Secure clamping and clear mounting standards Compatibility with the toolholder is governed by defined ISO parameters: form, free angle, tolerance class, fastening, size and thickness. The insert features a cylindrical hole with a single-sided countersink (40°–60°) for positive location and reliable clamp engagement. These characteristics simplify mounting checks and reduce the risk of misalignment during index changes. Using holders and clamping kits that match these ISO criteria provides predictable repeatability and safer operation in production environments. Practical selection and process advice Select the matching chipbreaker and the J740 grade based on material, machining type and machine stability; the chipbreaker choice controls chip form and evacuation, directly affecting cycle times and surface finish. For general-purpose turning of steels and common alloys the J740 grade offers a pragmatic balance between tool life and edge robustness. For specialist materials or highly interrupted cuts, consider a dedicated grade or geometry and consult technical advisors to align coolant, speeds and feeds with the insert’s capabilities. For application advice or to source the Tungaloy turning insert, contact Metav Werkzeuge for tailored recommendations and fast supply. Technical data Manufacturer article number: 6801325 SKU: 6801325-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: CCGT09T302 J740 Material: Carbide (Hartmetall) Facts Size: 09 Thickness: 3.97 mm Nose radius: 0.2 mm Cutting angle: 80° Clearance angle: 7° Special features Grade: J740 (Tungaloy) Chipbreaker: one-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Shape: rhombic Application: Turning (external and internal) FAQ What materials is this insert suitable for? The CCGT 09T302 J740 insert is designed as a general-purpose turning grade; the J740 carbide mix performs well on a broad range of steels and typical alloys when combined with the appropriate chipbreaker and cutting data. How does the hole and countersink affect mounting? The cylindrical hole with a single-sided countersink (40°–60°) ensures positive seating and repeatable clamping in ISO-compatible holders, improving stability during index changes for the CCGT09T302 J740 insert. Which chipbreaker should be chosen for finishing cuts? For finishing operations, pair the J740 grade with a fine-profile chipbreaker to produce short, manageable chips and a refined surface finish while keeping cutting forces moderate. Can this insert be used for internal turning? Yes, the rhombic geometry and specified clearance angle make the insert suitable for both external and internal turning applications when mounted in a compatible holder. What effect does the 0.2 mm nose radius have on tolerances? A 0.2 mm nose radius supports tighter corner geometry and reduces form deviation in fine turning; it is recommended where close dimensional control and a smooth surface are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 J740 Wendeplatten - Tungaloy
The combination of consistent edge stability and wear-resistant carbide grade J740 ensures predictable cycle times and longer tool life in turning operations; choose matching holders and clamping kits for reliable performance. Order the insert via Metav Werkzeuge or consult our specialists for holder compatibility. CCGT 09T302 J740 CCGT 80° rhombic ISO turning insert by Tungaloy A CCGT09T302 J740 Tungaloy indexable insert intended for external and internal turning, offering a rhombic 80° geometry and a single-sided chipbreaker for controlled chip formation ISO rhombic insert, 80° cutting edge J740 Tungaloy carbide grade, high wear resistance Single-sided chipbreaker for stable cutting Cylindrical hole with 40°–60° countersink Consistent cutting performance for general turning The insert is engineered for stable machining cycles in a broad range of turning tasks. As an ISO-standard rhombic insert with an 80° cutting edge, it delivers a predictable approach angle that supports robust engagement during both external and internal turning. The J740 grade is a Tungaloy carbide formulation optimised for a balance of wear resistance and toughness, which translates into extended life under intermittent loading. The single-sided chipbreaker supports manageable chip flow, reducing downtime for manual chip clearing and helping to protect the toolholder and workpiece from erratic cutting forces. Mounting, geometry and compatibility explained for correct assembly Compatibility with the selected toolholder depends on several geometric parameters: insert form, 7° relief angle, tolerance class, attachment type, size and 3.97 mm thickness. The rhombic shape and the 0.2 mm corner radius favour fine finishing and close-tolerance turning where small radius details are required. The insert is supplied with a cylindrical hole with a single-sided countersink (40°–60°), enabling secure clamping in holders designed for ISO rhombic plates. When selecting an insert seat and clamp, ensure the holder matches the plate size 09 and thickness to maintain correct seat contact and repeatability. Material grade and machining advantages for reliable productivity The carbide base material combined with the Tungaloy J740 coating/grade provides improved resistance to flank and crater wear while maintaining edge stability under variable cutting conditions. For component production where repeatability and surface finish matter, this combination reduces the frequency of insert changes and supports longer uninterrupted cutting times. The single-sided chipbreaker design encourages a stable chip geometry suitable for a wide range of steels and alloyed materials, helping to maintain lower cutting forces and consistent surface quality; this simplifies process planning and supports higher overall productivity. For machining applications that demand reliable edge life and stable chip control, contact Metav Werkzeuge for matching holders and fast availability of the Tungaloy CCGT09T302 J740 insert — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations. Technical data Article number: 6801321 Manufacturer SKU: TUN6801321 SKU: 6801321-Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Plate size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Cutting edge angle: 80° Special features Rhombic plate form Cylindrical hole + single-sided countersink (40°–60°) Single-sided chipbreaker Carbide material, Tungaloy J740 grade ISO designation: CCGT09T302 Application: turning FAQ What materials is this insert suitable for? The CCGT09T302 J740 insert is designed for general turning and, with the Tungaloy J740 carbide grade, offers a balance of wear resistance and toughness suitable for a broad range of steels and alloyed materials. How is the insert secured to the holder? This indexable insert features a cylindrical hole with a single-sided countersink (40°–60°) and must be used with a compatible holder that matches the ISO rhombic seat, the plate size 09 and the 3.97 mm thickness to ensure correct clamping and repeatability. What does the 0.2 mm corner radius mean for surface finish? A 0.2 mm corner radius provides finer edge geometry for closer tolerances and improved surface finish on turned components; it is suitable where precise radii or reduced tool marks are required. Can the insert be used for internal turning as well as external? Yes, the rhombic geometry and the 80° cutting edge make the plate suitable for both external and internal turning applications when mounted in the appropriate holder. How does the J740 grade affect tool life? The J740 Tungaloy carbide grade combines wear resistance with sufficient toughness to maintain edge stability, which generally extends tool life and helps sustain consistent performance over longer production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 J740 Wendeplatten - Tungaloy
Take advantage of the combination of the J740 material grade, precise 0.2 mm nose radius and ISO‑compatible rhombic geometry for steady turning results and reduced tool changes; order the insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT09T302 J740 — CCGT ISO turning insert for turning by Tungaloy CCGT09T302 J740 is an ISO‑standard rhombic indexable insert engineered for turning operations, supplying a balance of wear resistance and edge stability for both light finishing and stable production cuts. ISO-standard rhombic insert, size 09 J740 grade for wear resistance and toughness 0.2 mm nose radius for fine finishing 7° relief angle, compatible with ISO holders Durable grade and substrate for consistent cutting performance The insert uses a Tungaloy J740 grade on a solid carbide substrate, selected to combine wear resistance with sufficient toughness for repeatable edge life under varied turning conditions. The J740 designation denotes a cutting material engineered to support stable chip formation and extended tool life where edge retention matters; this leads to fewer interruptions for insert changes and a more predictable machining process. As an ISO‑specified plate, the component integrates into established toolholders and clamping systems when the holder's form, relief angle and tolerance match the insert geometry. Geometry and mounting designed for secure clamping and fine surface finish A rhombic geometry with an effective cutting angle of 80°, a 0.2 mm nose radius and 3.97 mm thickness delivers both rigidity and the option for close finishing passes. The insert is supplied with a cylindrical hole and a single‑sided countersink (40°–60°), allowing stable fixation with common clamping screws and locating elements. These mechanical details reduce micro‑movement at the cutting edge, improving surface quality and repeatability. Compatibility with a holder is determined by the insert’s form, relief angle, tolerance class, fastening method, size and thickness — check these parameters when selecting the mating toolbody. Practical benefits in production: chip control and easier process planning The one‑sided chipbreaker design helps to direct swarf and manage cutting forces for predictable chip flow in turning tasks. The combination of the J740 grade and the chipbreaker supports steady metal removal rates and helps maintain edge stability over longer cycles, which in turn reduces downtime and scrap. For process planning, the insert’s ISO conformity and clearly defined geometrical data simplify inventory management and reordering. When selecting an insert for a particular job, choose the chipbreaker and grade to suit the workpiece material, type of cut and machine stability to obtain the best compromise between material removal rate and surface finish. For precision turning with the Tungaloy J740 grade, order the CCGT09T302 through Metav Werkzeuge or contact the Metav Werkzeuge technical team at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice and rapid supply Technical data Article number: 6801322 Manufacturer SKU: TUN6801322 Model series: ISO‑turning inserts Key measurements Size: 09 Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Insert angle: 80° Construction & special features Material: carbide Grade: J740 Shape: rhombic Hole: with hole Hole style: cylindrical hole + single‑sided countersink (40°–60°) Chipbreaker: one‑sided FAQ What materials is the insert suitable for? The CCGT09T302 J740 insert is a carbide indexable insert in the J740 grade; select the chipbreaker and cutting parameters to suit the specific workpiece material and machining conditions. How is the insert fixed in the holder? The insert uses a cylindrical hole with a single‑sided countersink (40°–60°) for screw clamping; ensure the holder matches the insert form, size and tolerance class for secure fixation. What surface finish can be expected with the 0.2 mm radius? A 0.2 mm nose radius on the CCGT09T302 supports fine finishing passes and improved surface quality when combined with appropriate feeds and speeds. Is this insert compliant with ISO standards? Yes, the plate follows ISO specifications for turning inserts; compatibility depends on matching the holder’s geometry and tolerance class. Which chipbreaker does the plate use and what is its benefit? The insert features a one‑sided chipbreaker designed to control swarf and stabilise cutting forces during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 K313 Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts CCGT 09T302 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302HP-K313-KENNAMETAL Facts / Figures: ISO-Code: CCGT09T302 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.2 Special features Material: cemented carbide Grade: K313 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T302-K313-Kennametal 40END
CCGT 09T302 KC5010 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Technical data indexable inserts CCGT 09T302 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302LF-KC5010-KENNAMETAL Data & Figures: ISO-Code: CCGT09T302 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.2 Special features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGT-09T302-KC5010-Kennametal 40END
CCGT 09T302 KC5010 Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Design details CCGT 09T302 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302HP-KC5010-KENNAMETAL Data/ Figures: ISO-Code: CCGT09T302 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.2 Special features Material: cemented carbide Grade: KC5010 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T302-KC5010-Kennametal 40END
CCGT 09T302 KC5025 Indexable Insert - Kennametal
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications CCGT 09T302 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302LF-KC5025-KENNAMETAL ISO-Code: CCGT09T302 Grade: KC5025 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGT-09T302-KC5025-Kennametal 40END
CCGT 09T302 KC5025 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for CCGT 09T302 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302HP-KC5025-KENNAMETAL Figures for the tool: ISO-Code: CCGT09T302 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.2 Features Material: cemented carbide Grade: KC5025 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. Quotations of brand names and registered trademarks are for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T302-KC5025-Kennametal 40END
CCGT 09T302 KC5410 Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data CCGT 09T302 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302HP-KC5410-KENNAMETAL ISO-Code: CCGT09T302 Grade: KC5410 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGT-09T302-KC5410-Kennametal 40END
CCGT 09T302 KC730 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features CCGT 09T302 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302LF-KC730-KENNAMETAL Figures for the tool: ISO-Code: CCGT09T302 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.2 Special features Material: cemented carbide Grade: KC730 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCGT-09T302-KC730-Kennametal 40END
CCGT 09T302 KC730 Indexable Insert - Kennametal
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us a sample insert or drawing by post Design details for indexable inserts CCGT 09T302 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302HP-KC730-KENNAMETAL ISO-Code: CCGT09T302 Grade: KC730 Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCGT-09T302-KC730-Kennametal 40END
CCGT 09T302 KCS10B Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for CCGT 09T302 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302LF-KCS10B-KENNAMETAL ISO-Code: CCGT09T302 Grade: KCS10B Material: cemented carbide Form: rhombic Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Radius: 0.2 Chip Breaker: single-sided Angle: 80° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCGT-09T302-KCS10B-Kennametal 40END
CCGT 09T302 KCU10 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details CCGT 09T302 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302LF-KCU10-KENNAMETAL Data/ Figures: ISO-Code: CCGT09T302 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.2 Special features Material: cemented carbide Grade: KCU10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCGT-09T302-KCU10-Kennametal 40END
CCGT 09T302 KCU10 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for CCGT 09T302 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302HP-KCU10-KENNAMETAL Facts & Figures: ISO-Code: CCGT09T302 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.2 Features Material: cemented carbide Grade: KCU10 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-CCGT-09T302-KCU10-Kennametal 40END
CCGT 09T302 KCU10B Indexable Insert - Kennametal
You couldn't find the right insert? Let us help you!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Specifications CCGT 09T302 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302LF-KCU10B-KENNAMETAL Dataand Figures: ISO-Code: CCGT09T302 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.2 Special features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-CCGT-09T302-KCU10B-Kennametal 40END
CCGT 09T302 KCU10B Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Specifications for CCGT 09T302 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302HP-KCU10B-KENNAMETAL Facts and Figures: ISO-Code: CCGT09T302 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.2 Special features Material: cemented carbide Grade: KCU10B with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of brands and registered trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-CCGT-09T302-KCU10B-Kennametal 40END
CCGT 09T302 KCU25 Indexable Insert - Kennametal
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics for indexable inserts CCGT 09T302 from Kennametal Brand: Kennametal Manufacturer Order Number: CCGT09T302HP-KCU25-KENNAMETAL Facts and Figures: ISO-Code: CCGT09T302 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Radius: 0.2 Special features Material: cemented carbide Grade: KCU25 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-CCGT-09T302-KCU25-Kennametal 40END
CCGT 09T302 KS05F Wendeplatten - Tungaloy
Take advantage of the combination of KS05F wear resistance, 0.2 mm corner radius and ISO compatibility for consistent machining results; ideal where repeatable edge stability and straightforward insert replacement keep cycle times low. Order the CCGT09T302 KS05F insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT09T302 KS05F CCGT — ISO indexable insert for turning, 80° rhombic, 0.2 mm (Tungaloy) A CCGT09T302 KS05F indexable insert engineered for ISO-conforming external and internal turning applications, combining a robust carbide grade with a single-sided chipbreaker. *ISO-compatible 80° rhombic insert *KS05F Tungaloy carbide grade *0.2 mm corner radius for fine profiling *Cylindrical hole with single-sided countersink Higher productivity through predictable edge life The CCGT insert is based on a carbide substrate and the KS05F grade, selected to balance wear resistance and edge stability for turning operations. This combination reduces unplanned rework by extending the period between index changes, which translates directly into higher machine uptime. ISO-conforming geometry ensures predictable positioning and repeatable performance when paired with matched holders and clamping kits. Secure seating and reliable clamping for consistent cuts Designed with an 80° rhombic form and a cylindrical hole with a single-sided countersink (40°–60°), the insert delivers stable clamping in standard ISO holders. The 7° relief helps control cutting forces and reduces rubbing at the clearance face, while the 0.2 mm corner radius supports fine profiling and controlled chip formation. Clear mechanical features allow a quick assessment of suitability for a given toolholder and setup, simplifying tooling decisions on the shop floor. Application focus and adaptability to workpiece demands Intended primarily for turning, this insert suits both external and internal operations when the single-sided chipbreaker matches the chosen cutting parameters. The KS05F composition complements the insert geometry by providing a compromise between toughness and wear resistance, making it suitable for a range of steels and general turning tasks. For specialised materials or finishing tolerances, selecting the appropriate chipbreaker and adjusting feeds will deliver the desired surface quality and tool life; consult tooling guides to match process parameters precisely. Contact Metav Werkzeuge today to request a tailored recommendation for holders and process settings for this Tungaloy KS05F insert and ensure optimal setup for the intended turning task Technical data Article number: 6822274 Manufacturer SKU: TUN6822274 Brand: Tungaloy Model series: ISO turning indexable inserts Designation: CCGT09T302 KS05F Facts Shape angle: 80° Corner radius: 0.2 mm Relief angle: 7° Insert size: 09 Thickness: 3.97 mm Special features Material: carbide Grade: KS05F (Tungaloy) Plate form: rhombic Chipbreaker: single-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) ISO-conforming insert FAQ What turning tasks is this insert best suited to? The CCGT09T302 KS05F insert is designed for general external and internal turning where a balance of wear resistance and edge stability is required; it performs well in routine steel turning operations and where predictable edge life is valued. How does the KS05F grade affect tool life? The KS05F Tungaloy grade provides a compromise between toughness and hardness, improving wear resistance and maintaining a stable cutting edge under typical turning loads, which enhances the repeatability of tool life. Which holders are compatible with this ISO insert? Compatibility depends on insert form, size and tolerance; the CCGT09T302 KS05F fits ISO holders matching a 09-size rhombic insert with 80° geometry and the corresponding clamping arrangement and screw pattern. What advantages does the 0.2 mm corner radius provide? A 0.2 mm corner radius offers finer profiling capability and a controlled transition between edge and flank, helping to reduce stress concentrations and producing consistent surface finishes on turned components. Is the insert suitable for finishing and roughing operations? The CCGT09T302 KS05F can serve both finishing and light roughing, provided the chipbreaker and cutting parameters are selected to match the material and desired surface quality; heavier roughing may require different grades or larger radii. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, ISO compatibility and economical tool life for consistent serial production; order the inserts directly via Metav Werkzeuge or consult the specialists for application matching and fast delivery. CCGT09T302 NS9530 — CCGT ISO turning insert for finishing by Tungaloy CCGT09T302 NS9530 is an ISO rhombic turning insert designed for precision finishing in steel-turning applications. ISO rhombic insert, 80° cutting angle Uncoated cermet grade NS9530 0.2 mm corner radius for fine finish Cylindrical hole with 40°–60° countersink Consistent fine finishing with low cutting forces The insert offers a sharp uncoated cermet edge formulated as NS9530, optimised for finishing operations on steel. As a finishing grade, it delivers low cutting forces and a reliably high surface finish, which reduces downstream grinding and rework. The combination of a razor-sharp edge and 0.2 mm corner radius supports stable, continuous cuts and consistent dimensional results in repetitive production runs. This focus on process stability translates into predictable cycle times and fewer rejected parts. ISO compatibility and secure clamping for predictable performance Designed to the ISO plate family, the component ensures fitment where form, relief angle, tolerance class, fastening, size and thickness match the toolholder. The 80° cutting angle and 7° relief produce a robust contact geometry suited to many standard holders, while the cylindrical hole with single-side countersink (40°–60°) simplifies positive locating and fastening. With a plate thickness of 3.97 mm and rhombic profile, the insert integrates into conventional systems, allowing straightforward holder selection and minimal set-up time for shop-floor technicians. Productivity gains and economical operation in finishing Choosing a finishing cermet such as NS9530 contributes to reduced micro-chipping and consistent edge condition, which in turn improves batch yield and lowers total machining cost per part. The grade supports reliable chip formation under continuous cuts and small depths of cut, promoting stable tool life and constant surface quality across long production runs. The result is measurable efficiency: fewer interruptions for tool change, less scrap and a tighter adherence to surface-tolerance specifications that benefit overall throughput. Application notes and selection guidance for optimal results For turning applications where fine surface integrity is the priority, the CCGT09T302 NS9530 insert excels in light finishing passes on steel. Match the single-sided chipbreaker to material stability and choose modest feeds and small depths of cut for best outcomes. Lubrication or a light cutting fluid often improves surface finish with uncoated cermet grades; toolholders with good rigidity and accurate clamping will maximise the insert’s repeatable performance. Where interrupted cuts or heavy depths are required, select a more robust geometry or coated grade tailored to the higher mechanical demands. Request tailored application advice from Metav Werkzeuge for Tungaloy NS9530 finishing inserts and arrange rapid supply or technical matching by email at info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: 6997904 SKU: 6997904-Tungaloy Manufacturer SKU: TUN6997904 Designation: CCGT09T302 NS9530 Tungaloy insert Core specifications Cutting angle: 80° Relief angle: 7° Thickness: 3.97 mm Corner radius: 0.2 mm Design and features Material: carbide Grade: uncoated cermet NS9530 Chipbreaker: single-sided Hole style: cylindrical hole + single-side countersink (40°–60°) Plate form: rhombic Intended use: turning / finishing of steel FAQ What materials is this insert intended for? The CCGT09T302 NS9530 Tungaloy insert is a finishing grade developed primarily for steel, providing an uncoated cermet chemistry that enhances surface quality in continuous finishing operations (SKU 6997904-Tungaloy). Is the insert compatible with standard ISO holders? Yes; the insert conforms to ISO turning plate dimensions and its fit depends on form, relief angle, tolerance class, fastening, size and thickness; the 80° geometry and cylindrical hole with countersink support common clamping systems. Which machining conditions suit this grade best? The uncoated cermet NS9530 performs best with light finishing feeds and small depths of cut under continuous cutting. Use a rigid holder and consider a light cutting fluid to improve surface finish when required. Can the insert be used for interrupted or heavy roughing cuts? This finishing grade is optimised for continuous finishing; for interrupted cuts or heavy roughing, a tougher geometry or a coated, wear-resistant grade is recommended to withstand shock and higher loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the fine 0.2 mm nose radius to achieve superior surface quality in light finishing cuts; ordered as a ready-to-fit ISO insert it reduces setup time and supports stable, continuous turning operations. Order the insert directly via Metav Werkzeuge or ask our consultants if assistance is required. CCGT 09T302 NS9530 turning insert — uncoated cermet, 0.2 mm nose radius (Tungaloy) A CCGT 09T302 NS9530 insert engineered for precision external and internal turning on steel, offering a sharp cutting edge and low cutting forces for high-quality finishing. Uncoated cermet NS9530 for superior finish 0.2 mm nose radius for precise profile control ISO CCGT rhombic insert, 80° included angle Cylindrical hole with single-sided 40°–60° countersink Exceptional finish on steel with a finishing cermet The uncoated NS9530 grade is designed as a dedicated finishing solution for steel machining. As a cermet cutting material it offers a very sharp cutting edge, enabling lower cutting forces and excellent surface quality in continuous cuts and small depths of cut. The result is fewer secondary operations and more predictable part quality. For users seeking a premium surface without extensive grinding or polishing, this grade is an efficient choice that supports stable production cycles. Reliable ISO fit and straightforward tool changeovers Compatibility is governed by the ISO form and key dimensions; this insert follows the ISO CCGT format (designation CCGT09T302) and presents a rhombic profile with an 80° included angle and a 7° clearance. The mount uses a cylindrical hole with a single-sided countersink (40°–60°), which simplifies clamping on standard holders. Knowing these parameters allows rapid verification of holder suitability and reduces downtime during tool changes, providing a consistent, repeatable setup in mixed-machine environments. Practical machining guidance for consistent results The small 0.2 mm corner radius is ideal for fine profiles and shallow passes; it supports precise contouring while limiting cutting forces. Given the insert’s one-sided chipbreaker, select a matching chip control geometry and ensure a rigid clamping arrangement to exploit the NS9530 benefits fully. For interrupted cuts or heavy roughing, consider a more robust grade; for light finishing passes and continuous operations, this insert will deliver cleaner surfaces and reduced tendency to build up on the edge, helping to maintain dimensional accuracy and visual quality. Contact Metav Werkzeuge for tailored advice on Tungaloy finishing inserts and to secure the CCGT 09T302 NS9530 for your turning applications — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997912 Manufacturer article number: 6997912 SKU: 6997912-Tungaloy Manufacturer SKU: TUN6997912 Model series: ISO-Drehwendeschneidplatten Material: Cemented carbide Application: Turning Key measurements ISO designation: CCGT09T302 Size: 09 Corner radius: 0.2 mm Thickness: 3.97 mm Included angle: 80° Clearance angle: 7° Design and features Uncoated cermet grade NS9530 Rhombic plate form With hole Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker Fine finishing grade for steel Sharp cutting edge for low cutting forces FAQ What materials is this insert intended for? The NS9530 finishing grade is intended primarily for steel machining; the CCGT 09T302 NS9530 insert is optimised for continuous finishing passes on steel workpieces. Can this insert be used for internal and external turning? Yes, the ISO CCGT format and rhombic form suit both external and internal turning operations when mounted in a compatible holder. Is the CCGT09T302 suitable for interrupted cuts? This finishing grade is best for continuous cuts and small depths of cut; for frequent interrupted cutting, a tougher grade is recommended. How is the insert secured to the holder? The insert uses a cylindrical hole with a single-sided countersink (40°–60°); compatibility depends on holder form, tolerance class, size and thickness. What does the 0.2 mm radius mean for part finish? A 0.2 mm corner radius produces fine profiles and helps achieve a high surface finish while controlling cutting forces during light passes. Which chipbreaker does this insert have? The product is supplied with a single-sided chipbreaker suited to finishing operations and optimised for stable chip formation on steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the uncoated cermet NS9530 and the 80° rhombic geometry with a 0.2 mm nose radius for consistent finishing performance and low cutting forces; order the insert directly via Metav Werkzeuge or consult their application specialists for machining parameters. CCGT09T302 NS9530 CCGT — ISO turning insert for finishing, Tungaloy A CCGT09T302 NS9530 rhombic ISO turning insert designed as a finishing grade for steel, combining a sharp cutting edge with stable chip control. Uncoated cermet grade NS9530 For finishing turning on steel 80° rhombic geometry, 0.2 mm nose radius Cylindrical hole with 40°–60° countersink Exceptional surface quality with low cutting forces The insert is designed as a finishing grade using the NS9530 uncoated cermet, which provides a sharp cutting edge and reduced cutting resistance. For finishing passes on steel, this results in improved surface finish and minimal tool-induced vibration. The composition of the cermet offers a balance between edge strength and wear resistance, making the cutting edge particularly effective for continuous cuts and small depths of cut while keeping the energy input per pass low. Geometry tuned for stability and predictable chip behaviour The 80° rhombic outline and the 0.2 mm nose radius deliver a predictable contact geometry that reduces radial cutting forces and supports consistent dimensional control. The integrated single-sided chipbreaker is optimised for continuous cutting, breaking chips reliably at small feeds and helping to avoid built-up edge. A small nose radius is advantageous for tight tolerances and fine surface finishes, as it concentrates the cutting action while lowering the tendency for chatter on less rigid set-ups. ISO conformity and secure mounting for reliable setup Marked as an ISO-type CCGT insert, compatibility with a holder is determined by form, relief angle, tolerance class, fastening, size and thickness. The insert features a cylindrical hole with a one-sided countersink (40°–60°) and a plate thickness of 3.97 mm, which supports standard clamping systems and predictable seating. This ISO conformity simplifies tool selection and reduces setup time, ensuring repeatable clamping and consistent tool life across batches and machines. Practical machining guidance for finishing on steel As an uncoated finishing grade, the insert performs best in continuous cuts and modest feed rates where the excellent cutting edge yields superior topography. Matching the NS9530 grade with appropriate cutting data—reduced feed and moderate cutting speeds for final passes—will retain edge integrity and surface integrity. For interrupted cuts or unstable workholding, consider a different chipbreaker or a more robust grade; for stable finishing operations, the insert delivers controlled material removal and superior surface quality. The insert CCGT09T302 is particularly suited to external and internal turning where fine finishes and tight tolerances are required. For finishing-focused turning applications, request availability and application advice for the Tungaloy CCGT09T302 NS9530 insert from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6714354 SKU: 6714354-Tungaloy Manufacturer SKU: TUN6714354 Model series: ISO-Drehwendeschneidplatten ISO designation: CCGT09T302 Manufacturer: Tungaloy Facts Angle: 80° Relief angle: 7° Nose radius: 0.2 mm Thickness: 3.97 mm Insert size: 09 Special features Grade: NS9530 Cutting material type: uncoated cermet Plate form: rhombic Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Application: Drehen (turning) Typical use: External and internal finishing FAQ What turning operations is this insert suited for? The CCGT09T302 NS9530 insert is intended for external and internal turning operations, especially finishing passes on steel where a sharp edge and fine surface finish are required. Is the CCGT09T302 coated or uncoated? The CCGT09T302 is an uncoated cermet (NS9530) grade, optimised for low cutting forces and high surface quality in finishing applications. What does the 0.2 mm nose radius mean for machining? A 0.2 mm nose radius concentrates the cutting action to enable tighter tolerances and smoother finishes; it is ideal for small depths of cut and applications where dimensional accuracy and surface integrity are priorities. Which clamping criteria determine holder compatibility? Compatibility depends on form, relief angle (7°), tolerance class, fastening, size (09) and plate thickness (3.97 mm); the ISO CCGT designation simplifies matching to standard holders. What is the hole and countersink specification? The insert features a cylindrical hole with a one-sided countersink in the 40°–60° range, providing secure seating and standardised clamping for ISO-style toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 NS9530 Wendeplatten - Tungaloy
Product data inconsistent: the cutting material is listed as "uncoated cermet" while the material field specifies "Hartmetall" (cemented carbide). This discrepancy creates confusion and makes it challenging to determine the correct material type, which is crucial for accurately describing the product's properties, potential applications, and suitability for specific machining tasks. Without clear and consistent information, it is impossible to generate a reliable product description that meets the necessary standards for clarity and accuracy. Resolving this issue requires verifying the correct material designation and ensuring alignment between all data fields to avoid misunderstandings or misrepresentation of the product's characteristics.
CCGT 09T302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge and a 0.2 mm corner radius for superior finishing, together with ISO compatibility for easy integration into existing toolholder systems. Order the CCGT09T302 NS9530 insert directly via Metav Werkzeuge or consult our specialists for application advice. CCGT09T302 NS9530 CCGT — Tungaloy indexable turning insert, 0.2 mm radius, 7° clearance CCGT09T302 NS9530 — a rhombic indexable insert for precision finishing in turning applications Sharp cutting edge for fine finishing 0.2 mm nose radius for precise contours 7° clearance angle for low cutting forces Compatible with ISO turning toolholders Improved surface quality with a finishing-grade cermet The insert is made from an uncoated cermet finishing grade NS9530, designed specifically for low cutting forces and a very fine surface finish when turning steel. The composition and sharp geometry produce clean shearing at small depths of cut, which reduces the need for secondary polishing. As a result, cycle times for finishing operations can be shortened while maintaining consistent dimensional accuracy and improved part aesthetics. Secure mounting and predictable tool behaviour Designed to the ISO standard, the rhombic form with an 80° approach angle delivers a balance of accessibility and edge strength. The insert features a cylindrical hole with a single-sided countersink (40°–60°) to ensure stable clamping and repeatable seating in the pocket. The moderate 3.97 mm thickness and defined tolerance class contribute to consistent tool alignment, which reduces vibration and provides reliable cutting performance across series production. Practical application advice for productive turning Select this finishing insert for continuous cuts and small feeds where surface quality is the priority. The 0.2 mm corner radius supports precise profiling and fine contouring, while the 7° clearance contributes to reduced cutting forces and lower heat generation. The indexable insert is intended to be used as part of a system — insert plus compatible holder, shim and clamp — which simplifies inventory management and quick index changes. Regular inspection of the cutting edge and adherence to recommended feeds and depths of cut will extend service life and maintain repeatable results. For finishing tasks that demand consistent surface quality from a trusted brand, contact Metav Werkzeuge to order the Tungaloy CCGT09T302 NS9530 insert or request application guidance from our technical team. Technical Data Article number: 6997905 SKU: 6997905-Tungaloy Manufacturer SKU: TUN6997905 Model series: ISO turning indexable inserts Designation: CCGT09T302 NS9530 Tungaloy insert Facts Corner radius: 0.2 mm Clearance angle: 7° Thickness: 3.97 mm Insert size: 09 Approach angle: 80° Special features Grade: NS9530 (uncoated cermet finishing grade) Shape: rhombic (80°) Hole style: with cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning (finishing), suited to steel Material: carbide substrate FAQ What materials is this insert best suited for? The CCGT09T302 NS9530 insert is formulated as a finishing grade for steel; the NS9530 uncoated cermet provides low cutting forces and excellent surface finish when turning steel. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius offers precise contouring and improved finish on small depths of cut while reducing the risk of edge chipping during continuous finishing operations with the CCGT09T302. Is the insert compatible with standard ISO toolholders? Yes, the insert conforms to ISO turning insert standards; compatibility depends on holder form, clearance, tolerance, fastening method, size and thickness, but the ISO designation ensures broad interchangeability. What does the hole and countersink design provide? The cylindrical hole with a single-sided countersink (40°–60°) ensures stable seating and repeatable clamping, minimising movement under cutting loads and improving dimensional consistency. Which components are required to assemble a working insert system? A complete system comprises the indexable insert, a matching external holder or boring bar, a shim/seat, a clamp set and the appropriate replacement screw; correct assembly ensures the expected performance of the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCGT 09T302 SH7025 Wendeplatten - Tungaloy
Benefit from a combination of reliable edge stability, ISO compatibility and straightforward handling to maintain productive turning operations with minimal setup time; the coated grade ensures consistent tool life under variable engagement conditions. Order the CCGT09T302 SH7025 turning insert directly via Metav Werkzeuge or ask our consultants if needed. CCGT09T302 SH7025 turning insert by Tungaloy — coated carbide, 80° rhombic geometry The CCGT09T302 SH7025 is an ISO‑standard rhombic indexable insert designed for turning applications, offering a balance of toughness and edge stability for external and internal machining in variable engagement scenarios. ISO rhombic insert, 80° geometry Coated carbide SH7025 for edge stability Single-sided chipbreaker for controlled chips 0.2 mm corner radius for fine finishing Consistent process stability through SH7025 coating and substrate The graded SH7025 composition is a coated carbide designed for high stability at the cutting edge, which reduces premature wear when conditions change or when using smaller toolholders. The combination of a tough substrate and modern coating technology enables more predictable flank wear and longer intervals between index changes. In practical terms this means fewer unscheduled interruptions to production and a more constant surface quality on turned components, supporting efficient batch processes and mixed‑material workflows. Reliable geometry for repeatable surface quality and finishing The rhombic 80° geometry together with a 0.2 mm corner radius produces a balance between strength and fine finishing capability. The insert’s single‑sided chipbreaker controls chip formation to favour stable cutting forces and easier chip evacuation, which is particularly beneficial in confined tool setups. The plate thickness 3.97 mm and the standardised hole pattern (cylindrical hole with one‑sided countersink 40°–60°) ensure secure clamping and repeatable seating in ISO holders, translating into reliable tolerances and reduced rework for precision turning tasks. System compatibility and practical selection guidance for workshops As an ISO‑specified indexable insert, the component integrates into standard systems consisting of an insert, appropriate external holder or boring bar, shim/underlay and clamping set with replacement screws. Selection of the correct chipbreaker and grade should follow the workpiece material and machining strategy: choose a more aggressive chip control for unstable cut conditions or the SH7025 grade for operations where edge stability under variable engagement is prioritised. The insert supports both external and internal turning operations, making it suitable for small to medium workshop batches and for production environments seeking dependable, easy‑to‑standardise tooling solutions. For application advice or to reserve stock of the Tungaloy CCGT09T302 SH7025 insert contact Metav Werkzeuge for technical consultation and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6967371 Manufacturer SKU: TUN6967371 SKU: 6967371-Tungaloy Model series: ISO turning indexable inserts ISO designation: CCGT09T302 Core specifications Geometry angle: 80° Relief angle: 7° Corner radius: 0.2 mm Plate thickness: 3.97 mm Size designation: 09 Features and materials Grade/coating: SH7025 Substrate: coated carbide Plate shape: rhombic Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: turning (external and internal) Compatible system components: ISO insert, matching holder, shim/underlay, clamp set, replacement screws FAQ What materials is this insert designed to machine? The Tungaloy CCGT09T302 SH7025 insert is formulated as a versatile coated carbide grade suitable for a wide range of turning tasks; matching the chipbreaker and cutting data to the specific material ensures optimal performance. How does the 0.2 mm corner radius affect part finish? A 0.2 mm corner radius provides improved edge strength while enabling fine finishing; the geometry helps maintain consistent surface quality on turned components when using appropriate feeds and speeds with the insert. Is the insert suitable for both external and internal turning? Yes, the ISO rhombic format and the CCGT09T302 designation permit use in both external and internal turning applications provided a compatible holder and correct clamping are used. What mounting features ensure secure clamping? The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°), which together with the plate thickness of 3.97 mm ensures a solid seating and repeatable clamping in ISO‑compatible toolholders. Which chipbreaker should be selected for unstable engagement conditions? For variable cutting engagements, a conservative chip control profile is recommended; the single‑sided chipbreaker on this insert supports controlled chip formation, while the SH7025 grade helps maintain edge stability under shifting loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com