Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT09T304-FL2 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of a coated carbide grade engineered for demanding turning tasks and a Tiger‑tec Silver series that supports secure chip formation in high‑thermal applications; the result is steady productivity when machining stainless steel and heat‑resistant superalloys. Order the insert directly via Metav Werkzeuge or request application advice from the technical consultants. CCGT09T304-FL2 WSM01 indexable turning insert – Walter Tools, Tiger‑tec Silver for stainless steel and superalloys A CCGT09T304-FL2 WSM01 indexable turning insert engineered for reliable heavy‑duty turning of stainless steel and heat‑resistant superalloys, combining a robust grade with a versatile Rhombic 80° geometry Tiger‑tec Silver coated for extended tool life WSM01 grade for stainless and superalloys Rhombic 80° geometry for versatile turning 0.4 mm corner radius with 7° clearance Improve cycle times when machining demanding alloys The combination of Tiger‑tec Silver coating and the WSM01 coated‑carbide grade delivers higher thermal resilience and wear resistance, allowing increased cutting speeds in many applications. This grade is formulated to maintain a stable cutting edge under the thermal and mechanical loads typical for stainless steel and high‑temperature alloys; the immediate benefit is fewer interruptions for tool changes and a smoother production flow. Where process stability is critical, the coating supports consistent performance over longer tool life, reducing the number of inserts required per production batch. Reliable chip control and surface integrity Equipped with the FL2 chipbreaker, the insert promotes controlled chip formation across a range of feed rates, which helps to avoid built‑up edge and reduces rework. Controlled chips improve machine availability and protect component surfaces, particularly when facing materials that tend to form long or stringy swarf. The insert’s combination of geometry and chipbreaker results in improved surface finish and repeatable dimensional quality, making it suitable for serial production where consistent part appearance and tolerances are essential. Geometry optimised for flexible turning strategies The Rhombic 80° form together with a 0.4 mm corner radius and 7° clearance offers a balance between strength and access: the geometry supports stable roughing as well as fine finishing passes, depending on the chosen depth of cut and feed. The moderate corner radius reduces stress concentration while still permitting acceptable corner strength for interrupted cuts. The clearance angle assists in reducing rubbing and heat build‑up at the flank, contributing to predictable tool behaviour across different workpiece geometries. Clear specification and application scope for shop planning The insert is supplied in T3 thickness and size 09 format, providing a compact option for a wide range of turning holders and setups. Marked tolerance class G supports consistent fitment in standard toolholders. Material applicability is indicated by the grade designation S / M: S denotes suitability for heat‑resistant superalloys and titanium, while M denotes stainless steels. This explicit mapping of material groups simplifies process planning and grade selection for mixed‑material production environments. Contact Metav Werkzeuge for application support, delivery options and technical matching of the Walter Tools CCGT09T304-FL2 WSM01 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance Technical data SKU: CCGT09T304-FL2-WSM01-WALTER Designation: CCGT09T304-FL2 WSM01 Type: indexable turning insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Tolerance class: G Materials & special features Coating / grade: WSM01 coated carbide Chipbreaker: FL2 Plate form: Rhombus 80° Material suitability: stainless steel; heat‑resistant superalloys and titanium FAQ What materials is this insert best suited for? The CCGT09T304-FL2 WSM01 insert is designed for stainless steel and heat‑resistant superalloys; the WSM01 grade supports secure chip formation and thermal resistance. How does the FL2 chipbreaker affect performance? The FL2 chipbreaker on this Walter Tools insert promotes controlled chip breakage and stable swarf evacuation, improving surface integrity and machine uptime. Can the insert be used for both roughing and finishing? Yes, the Rhombic 80° geometry with a 0.4 mm corner radius offers a compromise between strength and finish capability for diverse turning operations. Which series and grade does the insert belong to? This product is part of the Tiger‑tec Silver series and employs the WSM01 coated‑carbide grade for demanding applications. What is the clearance and how does it influence cutting? The insert features a 7° clearance angle that reduces flank rubbing and heat accumulation, contributing to predictable tool life and consistent machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Trademarks and trade names are the property of their respective owners. Mention of brand names serves information and identification purposes only; no affiliation with Metav Werkzeuge is implied.
CCGT09T304-FM2 WMP20G WMP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance, a precise 0.4 mm corner radius and the FM2 chipbreaker for dependable machining of rostfreier Stahl; secure consistent chip control and reduced tool change intervals. Order genuine Walter Tools inserts through Metav Werkzeuge or request guidance from our technical advisers for optimal performance. CCGT09T304-FM2 WMP20G — Rhombic 80° turning/boring indexable insert, 0.4 mm radius (Walter Tools) The CCGT09T304-FM2 WMP20G is a rhombic 80° indexable insert designed for turning and boring applications, optimised for rostfreier Stahl under medium to robust machining conditions. Tiger·tec Gold coating for wear resistance Optimised for rostfreier Stahl machining Rhombic 80° form with 0.4 mm radius 7° relief angle for stable cutting Reliable chip control and longer tool life for rostfreier Stahl The Tiger·tec Gold series grade WMP20G delivers a balance of hardness and toughness that supports stable chip formation when machining rostfreier Stahl. The coated carbide structure reduces adhesive built-up on the cutting edge, helping to avoid common issues such as rapid edge wear and built-up edge. For production environments this means fewer unplanned stoppages and more predictable cycle times. The applied chipbreaker FM2 is engineered to guide chips away from the cut, improving evacuation and reducing the risk of surface damage. Geometry that improves repeatability and surface finish A Rhombic 80° insert geometry combined with a 0.4 mm corner radius and a 7° relief angle offers a versatile cutting profile that supports both light finishing cuts and more robust turning operations. The compact radius contributes to a fine surface quality while the relief angle reduces rubbing at the flank, lowering heat generation and extending edge life. These geometry choices translate directly into repeatable dimensional accuracy and a reduction in the need for rework across batch production. Process security and productivity in demanding conditions The engineered combination of grade and geometry aims to maximise process security: the coating and tailored microstructure of the grade resist thermal and mechanical stresses common in rostfreier Stahl machining, while the insert form and chipbreaker reduce the likelihood of unstable cutting. The result is improved throughput and lower overall machining costs per component. Integration into standard toolholders is straightforward, enabling quick tool changes and consistent mounting in multi-station setups. Contact Metav Werkzeuge for tailored cutting data and to source original Walter Tools CCGT09T304-FM2 WMP20G inserts for demanding rostfreier Stahl applications — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCGT09T304-FM2-WMP20G-WALTER ISO designation: CCGT09T304-FM2 WMP20G Product type: Turning/boring indexable insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WMP20G Core specifications Relief angle: 7° Corner radius: 0.4 mm Insert size: 09 Plate thickness: T3 Tolerance class: G Plate form: Rhombic 80° Special features Coating / technology: Tiger·tec Gold (coated carbide) Chipbreaker: FM2 Material application: rostfreier Stahl Application conditions: medium to robust Execution: T FAQ What materials is this insert intended for? The CCGT09T304-FM2 WMP20G from Walter Tools is specified for machining rostfreier Stahl and is tuned for the particular challenges these alloys present. How does the Tiger·tec Gold technology affect performance? Tiger·tec Gold provides a wear-resistant coated carbide structure that improves edge stability and reduces adhesive wear on the Walter Tools turning/boring insert CCGT09T304-FM2 WMP20G, especially under elevated temperatures. What benefits does the 0.4 mm corner radius provide? A 0.4 mm radius on this indexable insert balances improved surface finish with sufficient edge strength for consistent results in turning operations on rostfreier Stahl. Is the FM2 chipbreaker suitable for mixed finishing and roughing tasks? The FM2 chipbreaker supports controlled chip formation that aids both finishing passes and modestly robust cuts, enhancing process reliability for the CCGT09T304-FM2 WMP20G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer Walter Tools.
CCGT09T304-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
The combination of a heat‑resistant coated grade and a secure chipbreaker delivers stable cutting in demanding materials; expect consistent edge life, reliable chip control and improved process security. Order or request advice through Metav Werkzeuge for immediate selection support. CCGT09T304-FM2 WSM01 — Indexable turning insert, Tiger‑tec Silver, for stainless steels and superalloys (Walter Tools) A robust CCGT09T304-FM2 WSM01 indexable insert engineered for turning applications in rostfreie Stähle and heat‑resistant superalloys, providing secure chip formation and long tool life. Tiger‑tec Silver coated grade WSM01 Optimised for stainless steel and superalloys FM2 chipbreaker for secure chip control Rhombic 80° form with 7° clearance Reliable cutting for demanding materials The Tiger‑tec Silver grade WSM01 combines a coated carbide substrate with an application focus on rostfreie Stähle (stainless steels) and heat‑resistant superalloys. This composition supports stable chip formation and reduces the risk of built‑up edge when machining tough, work‑hardening materials. By using a dedicated grade for these groups, the insert helps maintain cutting‑edge integrity under elevated temperatures and cutting forces, which translates into fewer interruptions and more consistent production cycles. Geometry that supports process security and surface quality The rhombic 80° insert shape with a 7° clearance and 0.4 mm corner radius balances strength and accessibility: the acute geometry enables versatile entry angles, while the modest radius enhances edge resilience for longer tool life. The FM2 chipbreaker is designed to control swarf in continuous and semi‑continuous turning, reducing chatter and helping to deliver a reliable surface finish. Together, these geometric features make this insert suitable for medium to heavy turning passes where reproducible results are required. Interchangeability and handling for efficient setups Classified with tolerance G and the plate thickness T3, the insert conforms to common dimensional norms that ease indexing and replacement during tool changes. The standardised form and stable tolerances support predictable clamping behaviour in typical toolholders for rhombic inserts, which reduces set‑up time and minimises variation between inserts. The combination of form and thickness also contributes to consistent cutting conditions over repeated tool changes. Productivity gains through material‑matched performance Choosing an insert optimised for rostfreie Stähle and superalloys reduces the need for frequent regrinds and compensatory cutting parameters. The grade and chipbreaker interplay results in fewer interruptions from clogged chips or premature edge wear, allowing longer uninterrupted cutting times and better machine utilisation. For operations aiming to enhance throughput without sacrificing surface quality, this insert offers a pragmatic way to increase productivity with limited process changes. For machining stainless steels and high‑temperature alloys, consider the Walter Tools Tiger‑tec Silver CCGT09T304‑FM2 WSM01 insert — contact Metav Werkzeuge for tailored selection advice and swift supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCGT09T304-FM2-WSM01-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT09T304-FM2 WSM01 Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger‑tec Silver Grade: WSM01 Facts Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Coated carbide grade optimised for tough materials FM2 chipbreaker for controlled chip formation Suitable for rostfreie Stähle and heat‑resistant superalloys Designed for turning and regrindable edges Stable edge life and process security FAQ What materials is this insert suitable for? The CCGT09T304‑FM2 WSM01 insert from Walter Tools is specified for rostfreie Stähle (stainless steels) and heat‑resistant superalloys, reflecting its WSM01 coated carbide grade. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on the CCGT09T304‑FM2 WSM01 promotes secure chip control and reduced built‑up edge, which supports consistent surface finish and fewer machining interruptions. Can this insert be used for finishing and medium turning? Yes, the rhombic 80° geometry and 0.4 mm corner radius of the CCGT09T304‑FM2 WSM01 make it suitable for a range of turning operations, including medium cuts and finishing, depending on machine and process parameters. Is the insert compatible with standard toolholders for rhombic inserts? The dimensional tolerance class G and standard T3 thickness mean the CCGT09T304‑FM2 WSM01 is compatible with conventional holders designed for rhombic 80° indexable inserts. What advantages does the Tiger‑tec Silver series provide? The Tiger‑tec Silver series, exemplified by the CCGT09T304‑FM2 WSM01, delivers improved heat resistance and optimised coating characteristics for longer edge life when machining challenging alloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. No affiliation between our company and the named manufacturers is implied. The offered item is an original, brand‑new product of the respective manufacturer (Walter Tools).
CCGT09T304-FM2 WSM10S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coated grade and the FM2 chipbreaker for stable edge life and consistent chip control; order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCGT09T304-FM2 WSM10S Rhombic 80° indexable turning insert for rostfreier Stahl by Walter Tools The CCGT09T304-FM2 WSM10S is an indexable turning insert designed for demanding turning of rostfreier Stahl and heat‑resistant superalloys, offering a Tiger·tec Silver coating and a geometry tuned for secure cutting. Tiger·tec Silver coating for wear resistance Optimised FM2 chipbreaker for secure chip control Rhombic 80° geometry for versatile turning 7° clearance angle for stable cutting High performance grade for demanding materials The WSM10S grade, part of the Tiger·tec Silver series, is a coated carbide developed for hard‑to‑machine alloys and rostfreier Stahl. Its coating and substrate combination prioritise wear resistance and thermal stability, which translates into longer tool life and fewer interruptions in production. For practical terms, operators will see more consistent component quality and reduced insert changes when machining sticky, work‑hardening stainless steels or heat‑resistant alloys that normally demand conservative parameters. Secure chip formation and reliable cutting behaviour Built around the FM2 chipbreaker, this insert ensures controlled chip formation under varying cutting conditions. The chipbreaker geometry helps to avoid stringing and entanglement, supporting uninterrupted machining and safer handling at the machine. Stable chip control also reduces the risk of built‑up edge formation on rostfreier Stahl, maintaining surface finish and dimensional consistency across batches and contributing to higher overall process efficiency. Geometry tuned for versatile turning operations The rhombic 80° shape combined with a 7° clearance provides a balance between strength and accessibility for various turning tasks. The corner radius of 0.4 mm offers a compromise between edge robustness and fine finish capability, making the insert suitable for both light finishing cuts and more substantial engagement. The medium thickness (T3) and tolerance class G support reliable seating in common toolholders, ensuring repeatable results and straightforward indexability during multi‑station setups. Process advantages, availability and handling As a coated carbide insert, the product supports higher cutting speeds and improved tool life compared with uncoated grades when matched to appropriate parameters. The designation and grade are optimised for productive machining of rostfreier Stahl and superalloys, which helps to increase throughput and lower unit production costs over time. For assistance selecting compatible toolholders, cutting data or optimised feeds and speeds for specific alloys, Metav Werkzeuge offers expert guidance and can supply matching inserts for immediate production needs. Contact Metav Werkzeuge to discuss Walter Tools’ Tiger·tec Silver WSM10S inserts for your rostfreier Stahl applications and secure the best grade and geometry for stable, productive turning Technical data Article number: CCGT09T304-FM2-WSM10S-WALTER Designation: CCGT09T304-FM2 WSM10S Brand: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombic 80° Plate size: 09 Thickness: T3 Tolerance class: G Special features Grade: WSM10S Series: Tiger·tec Silver Chipbreaker: FM2 Material: Coated carbide Application groups: S / M (ISO 513) Suitable for: rostfreier Stahl; heat‑resistant superalloys FAQ What materials is this insert designed for? The CCGT09T304-FM2 WSM10S insert is engineered for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), with the Tiger·tec Silver coating improving thermal stability and wear resistance. How does the FM2 chipbreaker benefit production? The FM2 chipbreaker on this Walter Tools insert promotes controlled chip formation, reducing stringing and built‑up edge on challenging materials and supporting longer unmanned runs. Which geometry makes this insert versatile? The rhombic 80° form with a 7° clearance angle and 0.4 mm corner radius provides a robust edge for heavier cuts while still permitting fine finishing operations. Is this insert compatible with standard toolholders? The insert follows common indexable insert conventions (09 size, T3 thickness, tolerance class G) and fits standard toolholders designed for CCGT‑style rhombic 80° inserts; verify holder compatibility before mounting. Where to get cutting data and application support? For tailored cutting parameters and application support for the CCGT09T304-FM2 WSM10S by Walter Tools, Metav Werkzeuge can provide recommendations and supply matching inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, brand‑new product of the respective manufacturer.
CCGT09T304-FM2 WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WSM20S grade for reliable cutting in demanding materials such as rostfreier Stahl and heat‑resistant alloys; the Rhombus 80° geometry with a 0.4 mm corner radius and a 7° relief angle ensures consistent chip control and prolonged edge life. Order directly via Metav Werkzeuge or consult our specialists for application advice. CCGT09T304-FM2 WSM20S indexable insert — Tiger·tec Silver, for rostfreier Stahl & superalloys by Walter Tools CCGT09T304-FM2 WSM20S is an indexable cutting insert designed for demanding turning and boring tasks in materials that require heat‑resistant grades and stable chip formation Tiger·tec Silver coating WSM20S for tough materials Optimised chip control with FM2 chipbreaker Rhombus 80° geometry with 0.4 mm corner radius 7° relief angle for stable cutting action Consistent cutting performance for demanding materials The coated carbide grade delivers a balance of edge stability and wear resistance that is tailored to machining rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S). The Tiger·tec Silver technology on the substrate reduces thermal load on the cutting edge and supports a predictable wear pattern, which directly improves process reliability. For production environments where repeatable quality and reduced scrap are priorities, this insert offers a rational solution: fewer interruptions, predictable tool life, and consistent surface results. Geometry that improves surface finish and tool life The Rhombus 80° form combined with a 0.4 mm corner radius creates an optimum balance between strength and accessible cutting edge, delivering improved edge life without compromising finish. The 7° relief angle reduces flank contact and friction, lowering heat generation and minimising built‑up edge. The integrated FM2 chipbreaker is designed to control chip flow in interrupted and continuous cuts, helping to avoid long, tangled chips and to support efficient material evacuation — a practical benefit in workshop throughput and operator safety. Productivity gains and process security in daily use Thanks to the coated grade and robust geometry, the insert sustains longer tool life under higher cutting demands, which reduces tool change frequency and increases spindle utilisation. The consistent performance of the grade and the insert’s geometry makes cycle times more predictable and supports stable machining parameters across batches. Backed by Walter Tools’ reputation for precision tooling, this solution contributes to measurable productivity improvements and lower overall machining costs through extended life and stable quality. Contact Metav Werkzeuge today for tailored recommendations on integrating this Walter Tools insert into existing toolholders and production processes Technical Data SKU: CCGT09T304-FM2-WSM20S-WALTER Designation: CCGT09T304-FM2 WSM20S Series: Tiger‑tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Geometry: Rhombus 80° Relief angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Chipbreaker: FM2 Tolerance class: G Special features Coated carbide grade Suitable for rostfreier Stahl (ISO M) Suitable for heat‑resistant superalloys and titanium (ISO S) Optimised chip control and stable cutting edge Application: turning / boring indexable insert FAQ What materials is this insert suitable for? The CCGT09T304-FM2 WSM20S insert is designed for machining rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering thermal resilience and controlled chip formation. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker promotes short, controlled chips and reliable evacuation, improving process security and reducing the risk of chip entanglement during turning operations with this Walter Tools insert. What performance benefits does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WSM20S grade reduces heat impact on the cutting edge and supports a stable wear progression, which translates into longer tool life and more consistent surface quality. Can this insert be used for interrupted cuts? Yes, the combination of a robust corner radius and the FM2 chipbreaker makes the insert suitable for interrupted and continuous cuts where reliable chip control and edge strength are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only and do not imply any affiliation between our company and the trademark holders. The offered article is an original, factory‑new product of the manufacturer.
CCGT09T304-FN2 WN10 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of precise edge geometry, controlled chip formation and a compact plate design for reliable turning and drilling operations; the FN2 chipbreaker and 0.4 mm corner radius ensure consistent finishes and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific guidance. CCGT09T304-FN2 WN10 – Drilling and turning indexable insert, rhombic 80°, FN2 chipbreaker | Walter Tools CCGT09T304-FN2 WN10 is an indexable insert designed for drilling and turning operations where controlled chip formation and fine surface quality are required Rhombic 80° geometry for versatile use FN2 chipbreaker for controlled chips WN10 uncoated carbide grade 0.4 mm corner radius for fine finishing Stable chip control for higher throughput The FN2 chipbreaker delivers reliable chip formation across a range of common turning and reboring tasks, reducing the risk of interruptions in production. As an indexable insert, the geometry and chipbreaker work together to shorten cycle times by enabling predictable evacuation and minimising secondary operations for chip management. The insert’s role in stabilising processes contributes directly to improved machine utilisation and consistent component quality. Precise geometry for consistent surface quality The rhombic 80° plate form combined with a 0.4 mm radius and T3 thickness offers a balance between strength and accessibility in confined toolholders. This geometry supports fine finishing passes while maintaining edge robustness for routine machining. The tolerance class G indicates manufacturing precision that helps to reduce variation between indexed positions, resulting in repeatable part dimensions and better overall process control for both turning and reboring tasks. Material suitability and application guidance This insert is supplied in the open Walter grade series and the WN10 grade corresponds to an uncoated carbide that must be selected against the actual workpiece material using the manufacturer’s product matrix. Suitability for specific materials and hardness ranges should be verified in the technical matrix before use. For components where finish and dimensional accuracy are critical, combining the insert’s geometry with the correct grade selection enables efficient, repeatable machining results. Contact Metav Werkzeuge for tailored tool recommendations, availability and to place orders for Walter Tools inserts by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical Data SKU: CCGT09T304-FN2-WN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT09T304-FN2 WN10 Walter Tools Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WN10 Execution: T Plate designation: CCGT09T304-FN2 Core data Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Chipbreaker: FN2 Tolerance class: G Special features Uncoated carbide (WN10) – verify material suitability in product matrix Designed for drilling/reboring and turning applications Balanced geometry for finishing and general machining Series: open Walter grade offering catalogue-dependent material variants FAQ What machining tasks is this insert suitable for? This insert is intended for drilling, reboring and turning operations where controlled chips and fine surface quality are required; the CCGT09T304-FN2 WN10 insert performs well in such applications when paired with the correct grade selection. How does the FN2 chipbreaker affect performance? The FN2 chipbreaker on this insert promotes short, manageable chips and stable evacuation, improving process reliability and reducing interruptions during machining. Is the WN10 grade coated or uncoated? WN10 is supplied as an uncoated carbide grade in the Walter open series; check the product matrix for recommended applications and workpiece compatibility. What does the rhombic 80° geometry provide? The rhombic 80° geometry gives access to tight toolholder setups while maintaining sufficient edge support for finishing passes and decent versatility across turning and reboring tasks. How should material suitability be confirmed? Material suitability must be verified using the manufacturer’s product matrix and application charts before machining with the CCGT09T304-FN2 WN10 insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CCGT09T304-FN2 WNN10 Wendeplatten - Walter Tools
The coated-carbide WNN10 grade combined with a 0.4 mm corner radius and a rhombic 80° form delivers consistent edge behaviour and predictable chip formation; the 7° relief angle reduces cutting forces for stable turning. Order the insert directly via Metav Werkzeuge or consult the technical team for cutting data and grade selection. CCGT09T304-FN2 WNN10 — Indexable turning/boring insert, rhombic 80°, Walter Tools The CCGT09T304-FN2 WNN10 is a coated-carbide indexable insert for turning and boring operations, engineered for reliable chip control and reproducible edge life in a wide range of workshop applications. Coated carbide grade WNN10 for stable cutting Rhombic 80° insert form for versatile turning 0.4 mm corner radius for precise edge control 7° clearance angle reduces cutting forces Consistent cutting performance for repeatable results The WNN10 grade is a coated carbide class designed to promote stable chip formation and improved wear resistance in general turning tasks. The rhombic 80° geometry offers a robust cutting edge and broad contact area, which helps to distribute forces and reduce vibration in interrupted cuts. Because the insert carries a 0.4 mm corner radius, it supports good edge strength while maintaining the ability to generate a controlled profile on the workpiece. For customers seeking predictable tool life and surface quality, this combination of grade and geometry translates into fewer tool changes and more consistent component tolerances. Design elements that reduce machining cost and improve process reliability The integrated FN2 chipbreaker shapes chips to prevent entanglement and to assist evacuation in standard turning cycles, which reduces downtime for manual chip clearing. A 7° relief (free) angle lowers friction at the flank face and reduces cutting forces, improving dimensional stability and lowering spindle loads. The insert thickness T3 and form factor are chosen to ensure secure clamping in compatible toolholders and to offer sufficient rigidity for moderate depth-of-cut applications. Material suitability should be verified against the manufacturer’s product matrix to select the optimum feeds and speeds for specific alloys. Practical handling and integration into standard turning systems With a standard ISO-style designation and compact size 09, the insert fits common clamping systems designed for rhombic inserts; the CCGT09T304-FN2 designation indicates the specific combination of shape, size and chipbreaker for straightforward identification in tool management. The coated-carbide construction allows use in many workshop environments where robust performance is required, while the open-series Walter grade provides transparent grade characteristics for process engineers to compare. For installations requiring strict tolerance adherence, the tolerance class G provides reference for exchange and inventory planning. Contact Metav Werkzeuge for tailored cutting recommendations and procurement of Walter Tools inserts such as the CCGT09T304-FN2 WNN10; expert consultants are available by email or phone to review material suitability and cutting data Technical data SKU: CCGT09T304-FN2-WNN10-WALTER Designation: CCGT09T304-FN2 WNN10 Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Walter Schneidstoffsorte - Serie offen Facts Corner radius: 0.4 mm Clearance (free) angle: 7° Insert size: 09 Thickness: T3 Insert form: Rhombus 80° Tolerance class: G Special features Grade: WNN10 (coated carbide) Chipbreaker: FN2 Execution: T Basic designation without grade: CCGT09T304-FN2 Material designation: Katalogabhängig Note: Verify workpiece compatibility with the product matrix FAQ What materials is the WNN10 grade suited to machine? Material suitability depends on the grade matrix; the WNN10 coated-carbide grade is versatile, but exact workpiece compatibility should be checked using the Walter product matrix for the CCGT09T304-FN2 WNN10 insert. Which toolholders accept the rhombic 80° insert form? The rhombic 80° form is compatible with standard indexable turning toolholders designed for CCGT-style inserts; ensure the correct clamping seat and screw configuration for the CCGT09T304-FN2 WNN10. How does the FN2 chipbreaker influence chip control? The FN2 chipbreaker shapes and segments chips for improved evacuation in turning operations, reducing the risk of chip build-up and improving machining reliability with the CCGT09T304-FN2 WNN10 insert. Is the corner radius suitable for finishing operations? The 0.4 mm corner radius provides a balance between edge strength and surface finish, making the insert suitable for medium-finishing and general turning where a controlled profile is required. What tolerance class applies to this insert and why does it matter? The insert carries tolerance class G; this informs interchangeability and stack-up planning in indexable tooling systems and supports consistent clamping and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Die Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used here for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
CCGT09T304-MK4 WKK20S Wendeplatten - Walter Tools
Benefit from a combination of the Tiger‑tec Silver coating and an optimised rhombic geometry for consistent chip control and extended tool life; the robust MK4 chipbreaker and 0.4 mm corner radius ensure reliable performance in abrasive cast‑iron applications. Order the insert through Metav Werkzeuge or contact our consultants for application advice. CCGT09T304-MK4 WKK20S — Rhombic 80° indexable turning insert, Tiger‑tec Silver (Walter Tools) The CCGT09T304-MK4 WKK20S is a rhombic 80° indexable turning insert engineered for efficient machining of cast iron, combining a wear‑resistant coating with a chipbreaker tuned to produce controllable, short chips in interrupted and continuous cuts. Tiger‑tec Silver coated carbide grade WKK20S Optimised for cast iron machining Rhombic 80° form, 0.4 mm corner radius 7° clearance angle, MK4 chipbreaker Durable coating and grade for abrasive cast iron The combination of the Tiger‑tec Silver coating and the WKK20S grade provides high abrasion resistance and thermal stability, characteristics that matter when working with abrasive grey and nodular cast irons. The substrate is coated carbide, designed to resist flank wear and maintain a sharp cutting edge under typical cast‑iron cutting conditions. This leads to more predictable tool life and fewer unscheduled insert changes, supporting continuous production. The MK4 chipbreaker complements the grade by shaping chips to reduce tangling and aid chip evacuation during turning and boring operations. Geometry tailored for stability and edge strength The rhombic 80° insert form with a 0.4 mm corner radius balances edge strength and accessibility for profile work. A 7° clearance angle reduces rubbing at the flank and lowers cutting forces in many turning set‑ups. The CCGT ISO variant denotes the insert shape and hole/seat configuration, ensuring compatibility with standard toolholders designed for CCGT‑type inserts. With a compact insert size (09) and thickness T3, the design targets rigidity for medium‑to‑light finishing operations while retaining enough edge support for intermittent cuts in cast iron. Process reliability and integration into production Tolerance class G and the ISO designation ensure consistent dimensions for repeatable seating and predictable clamping behaviour in indexed toolholders. The MK4 chipbreaker is tuned to produce short, broken chips typical for cast iron, improving operator safety and reducing downstream chip‑handling effort. Classified for ISO group K (cast iron), this insert supports customers seeking reliable surface finish and dimensional stability in serial turning or boring processes. Walter Tools’ positioning as a precision‑tool provider underlines a focus on production‑proven geometry and consistent manufacturing quality. For application advice, availability and to specify the Walter Tools CCGT09T304-MK4 WKK20S for cast‑iron turning, contact Metav Werkzeuge for tailored technical support and rapid supply. Technical data SKU: CCGT09T304-MK4-WKK20S-WALTER Designation: CCGT09T304-MK4 WKK20S Product type: Boring/reaming and turning indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: T3 Shape: Rhombic 80° Tolerance class: G Special features Coating: Tiger‑tec Silver Grade: WKK20S (coated carbide) Chipbreaker: MK4 Application: cast iron (ISO group K) ISO designation: CCGT09T304-MK4 FAQ What materials is this insert intended for? The CCGT09T304‑MK4 WKK20S is specified for cast iron machining (ISO group K) and is optimised to handle the abrasive wear and short, breaking chips typical of these materials. How does the MK4 chipbreaker affect machining? The MK4 chipbreaker on the WKK20S grade produces short, controllable chips during turning, which improves evacuation and reduces the risk of chip entanglement in cast‑iron operations. Is the insert compatible with standard CCGT toolholders? Yes, the CCGT designation indicates the standard rhombic form and hole pattern, allowing the insert to be used with toolholders designed for CCGT‑type indexable inserts. What performance benefits does the Tiger‑tec Silver series deliver? The Tiger‑tec Silver series combines a wear‑resistant coating with a reliable substrate, delivering improved abrasion resistance, extended edge life and stable cutting behaviour in abrasive materials such as cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods from the manufacturer.
CCGT09T304-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of a heat-resistant Tiger‑tec Silver coating and the WSM01 carbide grade for stable edges and reliable chip control in demanding stainless and superalloy turning; order directly via Metav Werkzeuge or contact their consultants for tailored machining parameters. CCGT09T304-MM4 WSM01 turning/boring indexable insert — Tiger‑tec Silver, MM4 chipbreaker — Walter Tools CCGT09T304-MM4 WSM01 is a coated carbide indexable insert optimised for turning and bore‑turning applications in stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coating for heat resistance Optimised MM4 chipbreaker for stable chips 0.4 mm corner radius for consistent finishes 7° clearance angle for defined cutting geometry Consistent edge stability for demanding materials The WSM01 grade, combined with the Tiger‑tec Silver coating, is developed for reliable cutting in stainless steels and heat‑resistant superalloys. The coated carbide composition supports stable cutting edges under elevated temperatures and reduces the risk of built‑up edge formation. For machining environments where heat generation and material toughness challenge tool life, the insert’s materials and coating work together to extend service intervals and maintain consistent dimensional accuracy, making it a dependable option for production runs that demand repeatability. Predictable surface quality through geometry The rhombic 80° form and 0.4 mm corner radius ensure predictable engagement with the workpiece and help control flank and nose wear during finishing passes. A modest corner radius balances strength and finish: it supports edge robustness on interrupted cuts while enabling acceptable surface quality without excessive cutting forces. The T3 plate thickness and the rhombic geometry also aid stable clamping and repeatable seating in typical toolholders, which contributes to consistent part tolerances and less rework. Effective chip control for reliable machining cycles The MM4 chipbreaker is designed to promote controlled chip formation when cutting sticky, work‑hardening materials such as austenitic stainless steels and nickel‑based alloys. Coupled with the 7° clearance angle, the chipbreaker helps evacuate chips cleanly and reduces the frequency of manual intervention. Improved chip control lowers the likelihood of surface damage and contributes to uninterrupted production cycles, which is particularly valuable in batch manufacturing and complex component machining. Application scope and shopfloor handling This insert is suitable for turning and bore‑turning tasks on stainless steels and titanium or nickel‑based superalloys where secure chip control and edge stability are priorities. The tolerance class G and the size 09 designation align the product with standard indexable insert specifications, simplifying inventory management. For optimal results, match the insert geometry and grade with appropriate feeds, speeds and coolant strategy; when in doubt, consult machining data sheets or seek advice from Metav Werkzeuge to align cutting parameters with component requirements. Select the Walter Tools Tiger‑tec Silver WSM01 insert for challenging stainless and superalloy machining — contact Metav Werkzeuge for application support and fast supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCGT09T304-MM4-WSM01-WALTER Designation: CCGT09T304-MM4 WSM01 Product type: Turning / drilling‑boring indexable insert Series: Tiger‑tec Silver Manufacturer: Walter Tools Core specifications Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombic 80° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features MM4 chipbreaker Coated carbide grade WSM01 Optimised for stainless steels (M) and superalloys/titanium (S) Designed for stable edge life and secure chip formation FAQ What materials is this insert best suited for? This insert, the CCGT09T304‑MM4 WSM01 from Walter Tools, is optimised for stainless steels and heat‑resistant superalloys, offering enhanced edge stability under high temperatures. How does the MM4 chipbreaker improve machining? The MM4 chipbreaker on the CCGT09T304‑MM4 WSM01 promotes controlled chip formation, which improves evacuation and reduces the risk of surface damage during continuous turning operations. What does the 0.4 mm corner radius affect in practice? A 0.4 mm corner radius provides a compromise between edge strength and surface finish, supporting robustness on interrupted cuts while still enabling good workpiece quality in finishing passes. Is this insert suitable for finishing and roughing operations? The geometry and WSM01 grade make the insert adaptable; it can be used for both finishing and moderate roughing in difficult‑to‑machine materials, although cutting data should be adjusted accordingly. How does the Tiger‑tec Silver series benefit tool life? The Tiger‑tec Silver coating enhances heat resistance and wear behaviour, which contributes to longer tool life and more consistent performance when machining demanding alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any connection between Metav Werkzeuge and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
CCGT09T304-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of thermal-stable Tiger·tec Silver coating and an optimised MM4 chipbreaker to secure reliable chip control and extended edge life in demanding material groups; order original Walter Tools inserts through Metav Werkzeuge or consult our specialists for material-specific advice. Drilling/Boring Indexable Insert / Turning Indexable Insert CCGT09T304-MM4 WSM20S — for rostfreier Stahl and heat‑resistant superalloys | Walter Tools The CCGT09T304-MM4 WSM20S is a coated carbide indexable insert from the Tiger·tec Silver series, engineered for reliable performance when machining rostfreier Stahl and high‑temperature alloys in demanding production environments. Tiger·tec Silver coating for thermal stability Optimised MM4 chipbreaker for stable chips Rhombic 80° geometry for versatile cutting 7° clearance and 0.4 mm corner radius High‑temperature stability and edge reliability for demanding alloys The Tiger·tec Silver grade WSM20S combines a coated carbide substrate with a chemistry tuned for heat resistance and controlled wear, delivering consistent edge stability during prolonged engagement. In practice, this means improved process security when machining rostfreier Stahl or heat‑resistant superalloys and titanium: the coating reduces temperature peaks at the cutting edge while the carbide core supports mechanical strength. The technical advantage is fewer unscheduled insert changes and a steadier surface quality, translating into measurable gains in machining throughput and predictable tool life. Geometry and chip control that support productive turning and drilling The rhombic 80° insert form with 7° clearance and a 0.4 mm corner radius offers a balance between strength and accessibility in both radial and axial operations. Paired with the MM4 chipbreaker, the geometry produces short, controllable chips across interrupted cuts and continuous turning, improving swarf evacuation and protecting the cutting edge. For integrators and process planners, these features mean reduced tool‑related stoppages and more consistent component finish, especially in operations where chip shape and evacuation are critical for cycle time and machine safety. Production compatibility and handling for workshop efficiency Designed as an indexable insert of size 09 and thickness T3, this item fits common clamping systems where CCGT‑style inserts are specified and benefits from a tolerance class G for repeatable seating and clamping. The WSM20S grade is specified for machining categories M and S according to ISO 513, so material grouping and process planning are simplified: one insert covers rostfreier Stahl and selected heat‑resistant alloys depending on the application geometry. The result is fewer tool variants to manage, straightforward inventory decisions and easier tool‑life forecasting. For tailored application advice or to source original Walter Tools CCGT09T304‑MM4 WSM20S inserts, contact Metav Werkzeuge for expert guidance and prompt fulfilment Technical data Article number: CCGT09T304-MM4-WSM20S-WALTER SKU: CCGT09T304-MM4-WSM20S-WALTER Designation: CCGT09T304-MM4 WSM20S Manufacturer: Walter Tools Facts Geometry: Rhombus 80° Clearance: 7° Corner radius: 0.4 mm Thickness: T3 Size: 09 Tolerance class: G Special features Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: MM4 Material groups: M (rostfreier Stahl), S (heat‑resistant superalloys / titanium) Material substrate: S / M Product type: Drilling/Boring indexable insert / Turning indexable insert FAQ Which materials is this insert designed for? The CCGT09T304‑MM4 WSM20S insert from Walter Tools is intended for rostfreier Stahl (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), depending on the cutting geometry. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on this Walter Tools insert promotes short, controlled chips, improving evacuation and reducing the risk of chip entanglement in turning and drilling cycles. What are the key geometry highlights to consider? The insert features a rhombic 80° form, 7° clearance and a 0.4 mm corner radius, which together balance cutting edge strength with versatility for axial and radial engagements. Is the insert compatible with standard clamping systems? The CCGT09T304‑MM4 WSM20S follows a common CCGT indexable profile and a T3 thickness, designed for compatibility with holders specified for this insert geometry. How does Tiger·tec Silver improve performance compared with conventional grades? Tiger·tec Silver grades like WSM20S offer enhanced thermal stability and wear resistance, helping to maintain edge integrity during sustained contact with high‑temperature materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT09T304-MN2 WN10 WN10 Wendeplatten - Walter Tools
Benefit from a combination of precise geometry and a robust chipbreaker: the WN10 uncoated cemented carbide grade paired with the MN2 chipbreaker delivers stable chip control and consistent edge life, while the rhombic 80° shape with a 0.4 mm corner radius and 7° relief provides dimensional accuracy in turning and light boring operations. Order the CCGT09T304-MN2 WN10 directly via Metav Werkzeuge or ask our consultants if needed. CCGT09T304-MN2 WN10 — Rhombic 80° indexable insert, 0.4 mm corner radius · Walter Tools A CCGT09T304-MN2 WN10 indexable insert engineered for turning and light boring tasks where repeatable geometry and reliable chip formation are essential; suitable for application verification via the product matrix. Rhombic 80° insert geometry 0.4 mm corner radius for fine finishes MN2 chipbreaker for stable chips 7° relief angle for reliable tool engagement Consistent process performance through proven geometry The rhombic 80° geometry combined with a 0.4 mm corner radius yields a reliable compromise between strength and accessibility, enabling accurate diameter control and good surface quality in serial turning and light boring. The slightly acute approach of the geometry reduces cutting forces at entry, which contributes to predictable tool behaviour and reduces spindle load. As the insert is an indexable component it supports quick index changes and economical tool management, improving uptime and lowering per-part costs. Where material compatibility is critical, consult the product matrix to confirm suitability. Stable chip control and edge life from the MN2 chipbreaker and WN10 grade The integrated MN2 chipbreaker promotes secure chip formation and evacuation under typical turning feeds, reducing the risk of built-up edge and uneven wear. The WN10 grade denotes an uncoated cemented carbide formulation tailored for general-purpose performance; it provides a balance of toughness and wear resistance appropriate for a broad range of workpiece materials. For operators new to indexable inserts: a chipbreaker shapes chips to avoid tangling and to protect the cutting edge, while the grade determines how the edge maintains form under heat and abrasive conditions. Simple specification and integration into production Specification is straightforward: the insert is designated by its ISO-style code and size, with a T3 thickness and a size indicator 09 for compatibility with standard toolholders. The 7° relief angle supports positive clearance to prevent rubbing, and the insert’s open-series grade allows selection based on the application matrix. For workshops assessing tool kits, this insert integrates with established turning toolholders and supports efficient tooling logistics through its standardised form and indexable design. For order placement or technical advice regarding the Walter Tools CCGT09T304-MN2 WN10 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with application matching and product matrix queries. Technical data Article number: CCGT09T304-MN2-WN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT09T304-MN2 WN10 Walter Tools Insert designation (without grade): CCGT09T304-MN2 ISO designation: CCGT09T304-MN2 WN10 Series: Walter Schneidstoffsorte - Serie offen Grade: WN10 Execution: T Tolerance class: G Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Rhombus 80° Insert size: 09 Thickness: T3 Special features Chipbreaker: MN2 Material: Katalogabhängig Carbide type: uncoated cemented carbide (WN10) Application: drilling/boring and turning indexable insert Series note: Sorteneinsatz / Bedeutung — check product matrix for workpiece suitability FAQ What materials is this insert suitable for? Suitability depends on the workpiece and process; the WN10 uncoated cemented carbide is a general-purpose grade—consult the product matrix to determine whether the CCGT09T304-MN2 WN10 is appropriate for specific materials. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker shapes chips to improve evacuation and reduce built-up edge, which helps maintain a consistent cutting edge and improves surface finish in continuous and semi-continuous turning operations. What does the insert designation CCGT09T304 indicate? The designation encodes the insert form and size: rhombic 80° form, size 09, thickness T3 and geometry suited for turning; the full ISO-style code is used to match compatible toolholders. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT09T304-MN2 WNN10 MN2 Wendeplatten - Walter Tools
Benefit from the combination of a coated carbide grade and the MN2 chipbreaker for predictable chip control and sustained edge life; the rhombic 80° geometry with a corner radius of 0.4 mm supports versatile turning and boring tasks. Order directly via Metav Werkzeuge or request application advice from the consultants. CCGT09T304-MN2 WNN10 — Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte by Walter Tools (Rhombic 80°, 0.4 mm radius) The CCGT09T304-MN2 WNN10 is a precision indexable insert for boring and turning operations, featuring a rhombic 80° form and an MN2 chipbreaker to enhance machining stability. Rhombic 80° geometry for versatile turning Coated carbide grade WNN10 for durability MN2 chipbreaker for controlled chips Corner radius 0.4 mm for edge strength Productivity through reliable edge stability The rhombic 80° geometry together with the MN2 chipbreaker delivers consistent chip formation, which reduces interruptions and increases throughput on lathes and boring bars. The insert’s combination of geometry and chip control is engineered to produce predictable cutting conditions in medium-duty operations; this leads to shorter cycle times and fewer part reworks. Emphasis on stable chip evacuation supports safer, more efficient production runs, helping to maintain tight tolerances when repeatability matters. Durable cutting performance with coated carbide grade Manufactured in a coated carbide grade from the Walter open series, the insert offers a balance between wear resistance and toughness. The coated hardmetal layer improves heat resistance during sustained cuts and extends tool life under varying cutting parameters. The corner radius of 0.4 mm provides a compromise between edge strength and surface finish; this radius helps prevent premature chipping while allowing good surface quality on turned components. For best results, machining data should be aligned with the operations matrix in the product documentation. Flexible application and quality assurance With a medium clearance angle and a standard thickness profile, the insert suits a broad range of turning and boring applications where reliable edge performance and process stability are required. The tolerance class G assures dimensional consistency across batches, supporting predictable clamping and repeatable positioning in multi-tool setups. For material suitability, the specific application matrix should be consulted to confirm compatibility with component alloys and heat treatments; this careful selection ensures the insert meets productivity and surface specification targets. For tailored recommendations on using Walter Tools inserts in specific turning or boring processes, contact Metav Werkzeuge for application consultancy and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number (SKU): CCGT09T304-MN2-WNN10-WALTER Designation: CCGT09T304-MN2 WNN10 Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade / Sort: WNN10 Execution code: T Core dimensions Free angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Thickness: T3 Tolerance class: G Special features Coated hardmetal (coated carbide) MN2 chipbreaker Rhombic 80° geometry Designed for turning and boring operations Series: Walter Schneidstoffsorte - Serie offen Material specification: catalogue-dependent FAQ What applications suit this indexable insert best? The CCGT09T304-MN2 WNN10 insert is intended for turning and boring tasks where the rhombic 80° geometry and MN2 chipbreaker improve chip control and process stability. Which materials are compatible with this grade? Material compatibility should be checked against the product matrix; the WNN10 grade is a coated carbide designed for broad usage, but specific suitability depends on the component alloy and machining conditions. How does the corner radius affect machining results? A corner radius of 0.4 mm increases edge robustness and enhances resistance to chipping, balancing surface finish and tool life on medium-duty turning operations. Is the tolerance consistent between batches? Yes; the insert is manufactured to tolerance class G, supporting dimensional consistency and repeatable set-up in multi-tool environments. Can the insert work on both internal and external turning? The rhombic 80° geometry and the insert’s design allow use in both internal boring and external turning applications, subject to holder and machine suitability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision metalworking tools and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
CCGT09T304-MN2 WSM01 MN2 Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver durability and the MN2 chipbreaker for secure chip formation and consistent surface quality; the 7° relief and 0.4 mm corner radius further support long tool life and stable cutting in demanding materials. Order the CCGT09T304-MN2 WSM01 directly via Metav Werkzeuge or consult our specialists for application guidance. CCGT09T304-MN2 WSM01 indexable turning insert — rhombic 80° form, Tiger‑tec Silver, Walter Tools A CCGT09T304-MN2 WSM01 indexable insert engineered for reliable turning of stainless steels and heat‑resistant alloys, combining a coated carbide grade with a controlled chipbreaker for consistent machining. Tiger‑tec Silver coating for longevity Optimised MN2 chipbreaker for tough alloys Rhombic 80° form for stable turning 0.4 mm corner radius for controlled finishing Consistent chip control and extended tool life The coated carbide grade WSM01 within the Tiger‑tec Silver series is tailored for the demands of stainless steels and heat‑resistant alloys, where adhesive wear and heat build‑up are common. The MN2 chipbreaker supports safe and repeatable chip formation, reducing the risk of built‑up edge and promoting a reliable cutting process. Combined with a 7° clearance, this geometry helps to maintain a stable cutting edge under thermally aggressive conditions, translating into longer service intervals and fewer insert changes per production cycle. Geometry that delivers repeatable surface quality The rhombic 80° plate form and a 0.4 mm corner radius provide a balance between robustness and finishing capability, allowing for controlled engagement and improved surface finish on turned components. The insert’s tolerance class G ensures dimensional consistency between indexable plates, which supports predictable clamping and repeatability in serial production. Designed as a standard CCGT‑style insert, it integrates into common turning toolholders that accept rhombic 80° plates, simplifying tool management and setup. Versatile integration for productive machining As part of Walter Tools’ series, this insert offers broad material coverage—classified for M (stainless steels) and S (heat‑resistant superalloys and titanium)—so a reduced inventory of grades can serve multiple applications. The T3 thickness and execution type T contribute to edge stability under interrupted cuts and moderate depths of cut, making the insert an economical choice for mixed production environments. Overall, the combination of grade, chipbreaker and geometry supports process security, consistent part quality and efficient use of machine time. Choose Walter Tools’ Tiger‑tec Silver CCGT09T304-MN2 WSM01 for secure machining of stainless steels and heat‑resistant alloys and contact Metav Werkzeuge for tailored tooling recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCGT09T304-MN2-WSM01-WALTER Designation: CCGT09T304-MN2 WSM01 Manufacturer: Walter Tools Series: Tiger‑tec Silver Data Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Thickness: T3 Execution: T Tolerance class: G Special features Grade: WSM01 (coated carbide) Chipbreaker: MN2 Material suitability: M (stainless steels), S (heat‑resistant alloys / titanium) Intended use: turning / boring indexable insert Applicable for demanding, heat‑generating materials FAQ Is this insert suitable for machining stainless steels? Yes. The CCGT09T304-MN2 WSM01 insert from Walter Tools is graded for M‑group materials and is optimised for machining stainless steels with secure chip control and thermal resistance. Which materials can be machined with this insert? The insert is specified for M (stainless steels) and S (heat‑resistant superalloys and titanium), reflecting the WSM01 grade’s emphasis on heat resistance and stable cutting edge performance. What is the function of the MN2 chipbreaker? The MN2 chipbreaker promotes controlled chip formation and evacuation in tough, adhesive materials, aiding surface quality and reducing the likelihood of built‑up edge on the cutting edge. Does the insert fit standard rhombic 80° toolholders? Yes. The CCGT09T304‑style designation indicates compatibility with toolholders designed for rhombic 80° indexable plates, enabling straightforward integration into common turning setups. What are the key dimensional specifications to note? Key values include a corner radius of 0.4 mm, relief angle of 7°, plate size 09, thickness T3 and tolerance class G, which together define mounting and cutting behaviour. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only and do not indicate any affiliation between Metav Werkzeuge and the named manufacturers. The offered item is original, brand‑new equipment directly from the stated manufacturer.
CCGT09T304-MP4 WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise Rhombic 80° geometry and economical performance for reliable machining of Stahl; order directly via Metav Werkzeuge or consult our team for application guidance. CCGT09T304-MP4 WPP10G — Turning/drilling indexable insert, Tiger·tec Gold (for Stahl) | Walter Tools The CCGT09T304-MP4 WPP10G is a rhombic 80° indexable insert engineered for versatile drilling and turning tasks, optimised for machining Stahl in general engineering and production environments. Tiger·tec Gold coated grade WPP10G Designed for Stahl machining (ISO P) Rhombic 80° geometry, 0.4 mm corner radius MP4 chipbreaker for stable chip control Higher throughput with consistent wear behaviour The Tiger·tec Gold grade delivers a balance of wear resistance and toughness, which helps to extend tool life under a range of cutting conditions. By combining a coated carbide substrate with the WPP10G design, the insert maintains edge integrity during interrupted cuts and continuous turning, reducing the need for frequent index changes. The result is a measurable increase in uptime and predictable replacement intervals that support efficient production planning. Geometry that improves process reliability The Rhombic 80° geometry with a 0.4 mm corner radius and a 7° relief angle ensures a stable cutting edge and good tool engagement for common turning and boring operations. The geometry promotes secure seating in the toolholder and reduces vibration, which in turn contributes to consistent surface quality. The MP4 chipbreaker is engineered to form manageable chips for a broad range of feeds and depths of cut, improving swarf control and machine cleanliness. Clear suitability and application for Stahl Classified for material group P, the grade and geometry are tailored for unalloyed and alloyed Stahl. The classification indicates that the insert copes with the typical heat generation and chip formation encountered when machining these materials. For users unfamiliar with ISO group codes: P denotes the family of steels; matching the insert to this group simplifies tooling selection and helps avoid premature tool wear or poor surface finish. Economical handling and quality assurance in production With a tolerance class G and standard plate size designation 09, the insert supports straightforward inventory management and repeatable clamping precision. The T3 plate thickness provides a robust contact area for reliable seat support under cutting loads. These features combine to lower operating costs by reducing downtime and improving reproducibility across batches, making the component suitable for job shops and production lines seeking consistent performance. Contact Metav Werkzeuge for availability and tailored application advice on the Walter Tools CCGT09T304-MP4 WPP10G; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCGT09T304-MP4-WPP10G-WALTER Name: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT09T304-MP4 WPP10G Walter Tools Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WPP10G Chipbreaker: MP4 Material group: P (Stahl) Construction: Coated carbide FAQ What materials is this insert suitable for? The CCGT09T304-MP4 WPP10G from Walter Tools is designed primarily for the ISO P group, i.e. machining various types of Stahl. How does the MP4 chipbreaker benefit production? The MP4 chipbreaker on the indexable insert controls chip formation for safer evacuation and improved machine cleanliness during turning and drilling operations. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius provides a compromise between a robust cutting edge and the ability to produce a consistent surface finish, reducing the risk of edge chipping on the insert. Is the insert suitable for interrupted cuts and mixed operations? Yes, the Tiger·tec Gold coating and the WPP10G grade enhance edge stability, making this insert appropriate for intermittent cuts and combined drilling/turning tasks. How is the tolerance class relevant for toolholders? Tolerance class G indicates standardised dimensions and seating precision, which simplifies clamping and ensures repeatable positioning in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
CCGT09T304-MP4 WPP20G MP4 Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, the WPP20G grade and the MP4 chipbreaker for reliable and productive steel turning; the rhombic 80° form with a 0.4 mm corner radius supports consistent surface quality and stable chip formation. Order the CCGT09T304-MP4 WPP20G turning insert directly via Metav Werkzeuge or consult our team for application advice. CCGT09T304-MP4 WPP20G – Turning insert with Tiger·tec Gold coating, rhombic 80° form by Walter Tools CCGT09T304-MP4 WPP20G is a rhombic 80° turning insert engineered for efficient machining of steel, offering a Tiger·tec Gold coated carbide grade and an MP4 chipbreaker for controlled chip evacuation. Tiger·tec Gold coating for long tool life WPP20G grade optimised for steel MP4 chipbreaker for reliable chip control Rhombic 80° form with 0.4 mm corner radius Higher productivity when machining steel with stable cutting performance The combination of the Tiger·tec Gold coating and the WPP20G carbide grade is designed specifically for machining steels (designation P). This pairing reduces wear rates and supports longer tool life under the thermal and mechanical loads typical of steel turning. The integrated MP4 chipbreaker ensures predictable chip formation, which reduces interruptions and supports continuous operation. As a result, cycle times can be shortened and process efficiency increased without compromising component quality. Consistent surface finish through precise geometry and edge control A rhombic 80° insert form with a 0.4 mm corner radius and a clearance of 7° provides a balance between strength and accessibility in turning operations. The T3 plate thickness and tolerance class G contribute to repeatable seating and a stable cutting edge under varied cutting conditions. These design choices translate into fewer reworks and a more consistent surface finish, especially on medium- to heavy-duty turning tasks. The insert geometry is therefore suited to applications where both edge security and fine surface integrity matter. Application flexibility and integration into standard tooling systems The insert is intended for steel machining and supports a broad range of turning operations from finishing to more robust cuts, owing to the universality of the WPP20G grade. Its designation and shape match common toolholder systems, allowing straightforward indexing and replacement. The coated carbide and chipbreaker design together lower the risk of built-up edge and promote improved process reliability. For workshops aiming to maintain steady throughput, this insert delivers an accessible combination of durability and versatility that aids in predictable planning of tool changes and productivity metrics. For robust steel machining with Walter Tools' Tiger·tec Gold technology, contact Metav Werkzeuge for tailored tooling recommendations and fast supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCGT09T304-MP4-WPP20G-WALTER Item designation: CCGT09T304-MP4 WPP20G Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 09 Plate thickness: T3 Tolerance class: G Special features Coating technology: Tiger·tec Gold Chipbreaker: MP4 Applicable material: Steel (P) Insert shape: Rhombic 80° Execution: T FAQ What materials is this insert suitable for? The insert is specified for machining steels (designation P) and the WPP20G grade with Tiger·tec Gold coating is optimised for the thermal and chip-forming behaviour encountered when turning steel. How does the MP4 chipbreaker influence performance? The MP4 chipbreaker promotes predictable chip formation and evacuation, reducing the likelihood of chip-related interruptions and supporting continuous production runs with consistent surface quality. What benefits does the rhombic 80° form provide? The rhombic 80° geometry offers good edge strength combined with access to contact zones, enabling both robust cutting and fine finishing where required. Is this insert compatible with standard toolholders? The insert follows common indexable insert dimensions (size 09, form CCGT) and is designed for use in standard turning toolholders that accept rhombic 80° inserts. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating reduces abrasive and adhesive wear on the cutting edge, improving tool life and maintaining process stability during steel machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, factory-new goods from the manufacturer. Walter Tools is used here for identification of the product's origin.
CCGT09T304FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Benefit from the combination of PKD wear resistance, precise rhombic geometry and secure T3 clamping for consistent production flow; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. CCGT09T304FS-1 WDN10 – PKD rhombic 80° indexable insert for drilling and turning, Walter Tools The CCGT09T304FS-1 WDN10 is a polycrystalline diamond (PKD) indexable insert designed for high-precision machining of abrasive, non‑ferrous materials in drilling and turning applications PKD grade WDN10 for abrasive non‑ferrous materials Rhombic 80° form with 0.4 mm corner radius 7° clearance for stable cutting action T3 thickness for secure clamping Maximise uptime with PKD wear resistance and repeatable results The PKD composition of the WDN10 grade provides exceptional wear resistance, particularly where abrasive, non‑ferrous materials are involved. This hardness reduces flank wear and maintains sharp cutting edges over longer cycles, which translates into fewer index changes and more productive running time. The use of a polycrystalline diamond substrate makes the insert especially suited to high‑abrasion environments, preserving component tolerances and lowering overall tool‑related downtime while ensuring consistent surface quality. Geometry engineered for stability and consistent chip control The rhombic 80° form combined with a 0.4 mm corner radius and a 7° clearance angle delivers a balance of strength and precision. The moderate corner radius improves edge robustness for interrupted cuts while allowing a fine finish; the positive clearance reduces rubbing and heat build‑up. The integrated chipbreaker 1 aids controlled swarf formation, helping to maintain process stability and predictable tool life. These geometric decisions support repeatable seating and minimise vibration in both drilling and turning operations. Practical selection and safe integration into existing processes Specification choices such as the T3 plate thickness and size 09 format support secure clamping in standard toolholders, enabling straightforward retrofitting into established tool systems. As material behaviour varies, the insert’s suitability should be verified against the product matrix for the intended workpiece; the WDN10 PKD grade excels with abrasive, non‑ferrous substrates but requires process matching for optimal results. For application data sheets, cutting parameters and clamping recommendations, Metav Werkzeuge provides technical support and can advise on feed and speed windows to protect insert life and component integrity. Proven pedigree and consistent manufacturing quality Produced under the Walter Tools umbrella, this indexable insert benefits from a manufacturer reputation for precision tooling and reliable edge condition. The combination of a specialised PKD grade with controlled form tolerance (class G) supports reproducible component quality across batches. The manufacturing consistency and material choice aim to deliver the process security needed in demanding machining tasks, helping maintain productivity and reduce rework incidence when used within recommended parameters. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: CCGT09T304FS-1-WDN10-WALTER SKU: CCGT09T304FS-1-WDN10-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT09T304FS-1 WDN10 Walter Tools Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WDN10 Execution: T Core measurements Free angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Materials & special features Coating / grade: polycrystalline diamond (PKD) Chipbreaker: 1 Designation: CCGT09T304FS-1 ISO designation: CCGT09T304FS-1 WDN10 Material reference: Katalogabhängig Tolerance class: G FAQ What materials is this insert best suited for? The CCGT09T304FS-1 WDN10 insert is optimised for abrasive, non‑ferrous materials thanks to its PKD composition; suitability should be checked against the product matrix for specific alloys. Can this insert be used in both drilling and turning operations? Yes, the rhombic 80° form and the insert’s geometry support both drilling and turning applications as specified for this indexable insert from Walter Tools. How does the 0.4 mm corner radius affect performance? A 0.4 mm radius increases edge strength for interrupted or heavy cuts while still enabling a fine surface finish when feeds and speeds are set appropriately for the PKD grade. Is special clamping required for the T3 thickness? T3 thickness provides solid clamping in standard toolholders; ensure the seat and clamp correspond to the insert designation CCGT09T304FS-1 to guarantee stable holding. What process benefits can be expected from the WDN10 grade? The WDN10 PKD grade offers high wear resistance and stable edge condition in abrasive non‑ferrous applications, contributing to longer tool life and more consistent component quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
CCGT09T304FS-M1 WDN10 Wendeplatten - Walter Tools
High wear resistance of the WDN10 PKD grade together with the Rhombic 80° geometry and a 0.4 mm corner radius ensure reliable performance when machining abrasive, non‑ferrous materials; order the CCGT09T304FS‑M1 WDN10 directly via Metav Werkzeuge or request technical advice from our consultants. CCGT09T304FS-M1 CCGT09T304FS-M1 WDN10 indexable insert for drilling and turning, Walter Tools A CCGT09T304FS‑M1 WDN10 indexable insert engineered for efficient machining of abrasive, non‑ferrous materials with a rhombic 80° form and PKD cutting material. PKD grade WDN10 for abrasive non‑ferrous materials Rhombic 80° geometry for versatile cutting performance 0.4 mm corner radius for improved edge strength M1 chipbreaker for controlled chip formation Durable PKD grade for abrasive non‑ferrous applications The WDN10 grade is a PKD (polycrystalline diamond) cutting material designed for high abrasion resistance and extended tool life when machining non‑ferrous and other abrasive, non‑iron workpiece materials. This composition provides a predictable wear behaviour that supports longer production runs and fewer tool changes, translating into measurable efficiency gains on the shop floor. Suitability for specific alloys should be verified against the product matrix to ensure the best match between workpiece material and cutting grade. Geometry and chip control that stabilise the process The rhombic 80° geometry combined with a relief angle of 7° gives a balance between cutting edge robustness and accessibility in turning or boring operations. The 0.4 mm corner radius increases edge strength for interrupted cuts and improves surface finish on standard turning passes. The M1 chipbreaker promotes consistent chip formation and evacuation, reducing the risk of rework and ensuring more predictable machining behaviour. With a plate thickness of T3, the insert offers the stability required for repeatable, precise operations. Designed for productivity and repeatability With a standard 09 size and the described geometry, this indexable insert fits toolholders intended for rhombic 80° plates, enabling quick replacement and repeatable cutting parameters across shifts. The combination of PKD wear resistance and a robust geometry reduces downtime through fewer tool changes and less scrap. For process planning, the insert’s characteristics support higher productivity in abrasive non‑ferrous tasks while maintaining consistent surface quality over longer tool life. Practical guidance for integration into production When integrating this insert into production, pair it with holders and feed rates suitable for PKD tooling and check the match with the workpiece alloy. The manufacturer’s series information indicates that material assignment is catalogue dependent, so reviewing the product matrix and test cutting is recommended before full production use. For tailored setup parameters or compatibility checks with specific machines and holders, consulting Metav Werkzeuge will ensure the insert is used to its full potential. For abrasive non‑ferrous machining needs, consider the Walter Tools PKD CCGT09T304FS‑M1 WDN10 insert and contact Metav Werkzeuge for a customised process check or to place an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: CCGT09T304FS-M1-WDN10-WALTER SKU: CCGT09T304FS-M1-WDN10-WALTER Designation: CCGT09T304FS-M1 WDN10 Core data Relief angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 80° Insert size: 09 Thickness: T3 Features / Material suitability Chipbreaker: M1 Cutting material: PKD (polycrystalline diamond), grade WDN10 Product type: Drilling/boring insert / turning insert Series: Walter Schneidstoffsorte - Serie offen Material specification: catalogue dependent Manufacturer: Walter Tools FAQ Which materials is this insert suited for? The WDN10 PKD grade is intended for abrasive, non‑ferrous materials; its use is recommended for applications where high abrasion resistance is required, but final suitability should be checked in the product matrix. What are the key geometry values of the insert? The insert features a rhombic 80° form with a 7° relief angle and a 0.4 mm corner radius, plus a T3 thickness and an M1 chipbreaker for controlled chip formation. Can this insert be used for stainless steel? Stainless steel suitability is not specified for this grade; the insert is optimised for non‑ferrous and abrasive non‑iron materials, so check the product matrix for confirmation before use. Which toolholders accept this plate? Holders designed for 09 rhombic 80° indexable inserts and compatible clamping systems will accept this plate; verify holder compatibility and clamping data with the chosen toolholder manufacturer. How does the PKD material affect tool life and process stability? PKD provides high wear resistance on abrasive workpiece materials, extending tool life and reducing tool change frequency, which improves process stability and productivity in applicable applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only; there is no commercial connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer, Walter Tools.
CCGT09T304M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the Walter Cermet grade and the precision 0.4 mm corner radius for reliable finishing and consistent component quality; order directly via Metav Werkzeuge or consult our team for application-specific cutting data. CCGT09T304M-FP2 WEP10C indexable boring/turning insert — Cermet grade, FP2 chipbreaker, Rhombic 80° CCGT09T304M-FP2 WEP10C is an indexable insert designed for finishing and light to medium-duty turning and boring operations, where consistent surface quality and process stability are required Cermet grade WEP10C for fine finishing Rhombic 80° geometry for stable engagement FP2 chipbreaker for predictable swarf control 0.4 mm nose radius for precise profiles Consistent surface quality through cermet performance The Walter Cermet series offers a cutting material engineered for accurate finishing and extended edge life. The cermet grade provides a harder, wear-resistant cutting edge than conventional carbides, which helps to maintain a consistent profile over longer tool life. With the FP2 chipbreaker geometry and the rhombic 80° form, this insert reduces vibration at the cutting edge, resulting in improved surface finish and repeatable dimensions. For production environments where part conformity and low rework rates are critical, the material and geometry combine to deliver measurable quality benefits. Geometry and edge preparation that improve process reliability A 7° relief angle and a 0.4 mm corner radius create a cutting geometry that balances robustness with the micro-geometry required for fine finishing. The rhombic 80° shape provides secure positional stability in standard toolholders and enables controlled cutting forces during entry and exit. The modest nose radius supports accurate profile definition without compromising edge strength. Because the insert is part of the Walter Cermet family, the combination of shape and edge preparation is tuned to support consistent cutting conditions and predictable tool-change intervals, helping to lower overall machining costs. Chip control and handling for efficient production cycles The integrated FP2 chipbreaker is designed for manageable swarf formation in finishing and semi-finishing cuts. Controlled chip formation reduces the risk of surface damage from recutting and helps maintain coolant access to the cutting zone. In automated or lights-out operations, this predictability reduces stoppages and the need for manual intervention. When paired with appropriate toolholder geometry and cutting parameters, the insert supports steady cycle times and improved process uptime, which is particularly valuable in batch production and subcontract machining. Practical integration: compatibility and recommended use The insert is supplied in the standard CCGT format with T3 thickness and plate size 09, allowing straightforward replacement in many common clamping systems. The tolerance class G and the rhombic seat ensure repeatable seating and minimal setup variation. For optimal results, match cutting speeds and feeds to the cermet characteristics and consult the manufacturer data sheet or Metav Werkzeuge for specific parameter recommendations. Where material compatibility is uncertain, verify the grade suitability in the product matrix before series application. Contact Metav Werkzeuge for tailored cutting data, availability and application advice for the Walter Cermet CCGT09T304M-FP2 WEP10C insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: CCGT09T304M-FP2-WEP10C-WALTER SKU: CCGT09T304M-FP2-WEP10C-WALTER Designation: CCGT09T304M-FP2 WEP10C Core measurements Relief angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 09 Plate thickness: T3 Special features Cutting material: Walter Cermet series Grade: WEP10C (cermet) Chipbreaker: FP2 Tolerance class: G Execution: T FAQ What materials is this insert best suited to machine? This insert, specified as a cermet grade WEP10C in the Walter Cermet series, is optimised for finishing and semi-finishing operations; the exact material suitability should be checked against the product matrix for the intended workpiece. How does the FP2 chipbreaker affect machining? The FP2 chipbreaker produces controlled chips that reduce the risk of surface damage and improve coolant penetration, supporting stable machining cycles with fewer interruptions when using the CCGT09T304M-FP2 WEP10C insert. Can this insert be used in existing toolholders for turning and boring? Yes, the CCGT format and rhombic 80° geometry are compatible with common clamping systems; ensure the seat and tolerance class G match the toolholder to guarantee correct seating and repeatability. What surface finish improvements can be expected? Thanks to the cermet grade and the 0.4 mm corner radius, the insert enhances surface quality in finishing cuts by maintaining a stable cutting edge and reducing micro-chipping over longer tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
CCGT09T304ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the combination of Cermet cutting material and the FX4 chipbreaker for stable chip control and consistent surface finish; the compact 0.4 mm corner radius and 80° rhombic geometry support versatile turning operations. Order directly via Metav Werkzeuge or consult our technical team for application-specific advice. CCGT09T304ML-FX4 WEP01C — Drehwendeschneidplatte (turning insert) by Walter Tools, Cermet grade with FX4 chipbreaker A CCGT09T304ML-FX4 WEP01C insert designed for general turning tasks, combining Walter Cermet grade performance with an FX4 chip control geometry for improved process stability and finish quality Walter Cermet grade WEP01C for durable cutting FX4 chipbreaker for reliable chip control Rhombic 80° geometry for versatile turning 0.4 mm corner radius for fine finishing Increase productivity with stable chip control and consistent results The combination of Cermet cutting material and the FX4 chipbreaker is engineered to deliver stable chip formation and reliable evacuation under a range of cutting conditions. This reduces interruptions caused by poor chip control and supports higher feed rates where appropriate, contributing to measurable improvements in productivity. The insert’s geometry is configured to maintain a consistent cutting edge, which in turn helps to prolong tool life and reduce unplanned downtime. Achieve improved surface finish with precision geometry The 80° rhombic geometry and 0.4 mm corner radius enable controlled engagement at the cut edge, producing a more consistent surface finish on turned parts. These design choices balance strength and accessibility: the rhombic form provides robust support for the cutting edge while the modest radius allows for fine finishing without sacrificing edge stability. For operations where dimensional consistency and appearance are priorities, this configuration offers a clear advantage. Suitable for varied turning tasks — check the product matrix for material match Supplied in the Walter Cermet series, the insert’s cutting grade is optimised for wear resistance and consistent performance. Material suitability should be verified against the product matrix to ensure optimal selection for specific workpiece materials. The WEP01C grade is intended for economical, productive machining; compatibility with particular alloys or hardened materials must be confirmed to guarantee the expected processing reliability and surface quality. Practical handling benefits and process reliability The insert’s T3 thickness, standardised size and the 7° clearance angle facilitate secure clamping and consistent seat positioning in compatible toolholders, which simplifies tool changes and repeat setups. These practical aspects contribute to predictable cutting behaviour and make the insert suitable for batch production environments where repeatability and efficiency are valued. Together, these attributes support streamlined workflows and fewer machine interventions. Discuss Walter Tools CCGT09T304ML-FX4 WEP01C with Metav Werkzeuge to determine the optimal application and ensure the best grade selection for the intended machining tasks Technical Data SKU: CCGT09T304ML-FX4-WEP01C-WALTER Designation: CCGT09T304ML-FX4 WEP01C Series: Walter Cermet Grade: WEP01C Manufacturer: Walter Tools Core Data Shape: Rhombus 80° Size: 09 Thickness: T3 Clearance angle: 7° Corner radius: 0.4 mm Tolerance class: G Chipbreaker: FX4 Material (tool): Catalogue-dependent Special features Cermet cutting material class FX4 chipbreaker for controlled chips Robust geometry for stable edge support Designed for productive turning operations Material suitability to be checked via product matrix FAQ What cutting tasks is this insert designed for? The CCGT09T304ML-FX4 WEP01C insert from Walter Tools is designed for versatile turning operations where stable chip control and consistent surface finish are required; suitability for specific materials should be checked against the product matrix. Can the WEP01C grade handle high-feed turning? The WEP01C cermet grade supports productive machining and, combined with the FX4 chipbreaker, can enable efficient turning at increased feeds where the workpiece material and setup are appropriate. How does the 0.4 mm corner radius affect results? A 0.4 mm radius helps to produce finer surface finishes and reduces risk of edge chipping in finishing passes while maintaining sufficient edge strength for general turning tasks. Is special tooling required to use this insert? The insert requires a compatible toolholder sized for the 09 format and T3 thickness; the 7° clearance angle and rhombic 80° geometry are standardised to fit common turning holders for Walter Tools inserts. Where to get application advice or compatibility information? For application-specific guidance and to confirm material compatibility, contact Metav Werkzeuge; they can advise on the use of the Walter Tools CCGT09T304ML-FX4 WEP01C insert and recommend suitable holders or grades. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanation and comparison only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory-new product of the manufacturer, Walter Tools.
CCGT09T304MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Combine the fine‑finishing quality of the Walter Cermet WEP01C grade with the controlled chip formation of the FX4 chipbreaker and the precise geometry of a Rhombus 80° insert for stable, repeatable turning results; order or consult Metav Werkzeuge for application guidance. CCGT09T304MR-FX4 WEP01C turning insert — Walter Tools, FX4 chipbreaker, Rhombus 80° A CCGT09T304MR-FX4 WEP01C turning insert engineered for precision finishing and consistent chip control in indexable turning operations; check the product matrix for specific material suitability Walter Cermet grade for fine finishing FX4 chipbreaker for controlled chip formation Rhombus 80° form with 0.4 mm nose radius 7° clearance and tolerance class G Precision finishing from a cermet cutting grade The Walter Cermet composition of this insert focuses on delivering a superior surface finish and stable cutting performance at moderate feeds. Cermet grades are optimised for fine finishing thanks to their hardness and wear resistance; in practice this means longer intervals between edge changes and a more consistent part quality during finishing passes. The FX4 geometry further supports this by influencing the way chips are curled and evacuated, reducing the incidence of built‑up edge and improving surface integrity. Controlled chip formation for reliable process results The FX4 chipbreaker is designed to guide chips into short, manageable shapes, which reduces entanglement and helps maintain stable cutting forces. For production environments where predictable chip behaviour increases uptime and operator safety, this chip control is a clear advantage. When combined with the insert’s robust edge preparation, the chipbreaker contributes to consistent tool life and fewer interruptions for chip clearing, supporting efficient machining cycles. Geometry and tolerances that support repeatability The Rhombus 80° form with a 0.4 mm nose radius and 7° clearance provides a balance between strength and accessibility for external turning and finishing profiles. The T3 thickness and tolerance class G ensure predictable seating in standard toolholders and reproducible cutting engagement from one insert to the next. Such dimensional control is beneficial for automated setups and serial production where interchangeability and minimal set‑up variation matter. Practical application notes and handling This indexable insert is supplied in the Walter Cermet series and is designated WEP01C, a cermet grade intended for fine finishing applications; compatibility with specific workpiece materials should be verified against the manufacturer’s product matrix. The insert’s compact size and clear geometry make it suitable for tight radii and profile work where a fine surface finish is required. For mounting and edge management, follow standard torque and seating procedures to secure consistent contact and avoid micro‑movement under cutting forces. Contact Metav Werkzeuge for technical advice on implementing the Walter Tools CCGT09T304MR‑FX4 WEP01C insert in specific turning applications, or to request the product matrix and availability — eMail: info@metav-werkzeuge.com Tel: +49 2822 7131930 Technical data Article number: CCGT09T304MR-FX4-WEP01C-WALTER Designation: CCGT09T304MR-FX4 WEP01C Brand: Walter Tools Facts Clearance angle: 7° Nose radius: 0.4 mm Insert size: 09 Thickness: T3 Tolerance class: G Special features Grade: Walter Cermet, WEP01C Chipbreaker: FX4 Shape: Rhombus 80° Execution: T Series: Walter Cermet Material designation: Katalogabhängig FAQ What workpiece materials is this insert suitable for? The WEP01C grade is a cermet type designed primarily for fine finishing; suitability for specific metals must be confirmed in the Walter Tools product matrix for the CCGT09T304MR‑FX4 WEP01C insert. How does the FX4 chipbreaker affect machining? The FX4 chipbreaker produces controlled, short chips that aid evacuation and reduce entanglement, improving process stability when using the CCGT09T304MR‑FX4 WEP01C insert. Which toolholder geometry is required for this insert? The Rhombus 80° form and T3 thickness require a compatible seat for indexable inserts of that profile; verify holder compatibility with the CCGT09T304MR‑FX4 specification before assembly. Can the insert be used for roughing operations? The WEP01C cermet grade and the 0.4 mm nose radius are optimised for finishing; roughing may be possible in lighter cuts but checking the application data is recommended for the CCGT09T304MR‑FX4 WEP01C. How does the tolerance class G impact production? Tolerance class G supports predictable seating and repeatable positioning of the insert, which helps maintain consistent cutting behaviour across multiple indexings. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Where referenced, brand names such as Walter Tools are used for descriptive purposes only and indicate original, factory‑new goods; no affiliation with the trademark owners is implied.
CCGT09T308-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
Reliable machining of stainless steel and heat‑resistant alloys is achieved through the combination of the Tiger‑tec Silver grade and the FM2 chipbreaker, delivering stable chip formation and extended cutting edge life; order the insert directly via Metav Werkzeuge or contact our consultants for application support. CCGT09T308-FM2 WSM01 Drilling/Turning Indexable Insert, Tiger‑tec Silver — Walter Tools The CCGT09T308-FM2 WSM01 is an indexable insert for drilling, bore enlargement and light turning, engineered for demanding applications in stainless steel and heat‑resistant superalloys/titanium. Tiger‑tec Silver for thermal stability FM2 chipbreaker for stable chip control Rhombic 80° form with 0.8 mm radius Designed for stainless steel and superalloys High thermal stability for consistent cutting performance The Tiger‑tec Silver series provides a coated carbide solution optimised for elevated temperatures and abrasive conditions. The WSM01 grade is specifically developed for the machining of materials in ISO groups M and S, offering improved resistance to heat and wear. As a consequence, the cutting edge maintains geometry for longer under high thermal loads, which leads to fewer interruptions for tool changes and more predictable cycle times. This behaviour supports production environments where process security and repeatability are paramount. Controlled chip formation reduces downtime and improves surface quality Equipped with the FM2 chipbreaker and a Rhombic 80° shape, the insert ensures consistent chip control even in sticky or work‑hardening materials. The moderate 0.8 mm corner radius and 7° relief angle balance edge strength with cutting smoothness, reducing the risk of build‑up and enabling steadier tool engagement. Stable chips mean less manual intervention at the machine and a lower likelihood of workpiece damage, which contributes directly to productivity gains and a reduction in overall production costs. Versatile geometry and robust specification for mixed operations The insert’s geometry (plate size 09, thickness T3, tolerance class G) is designed for compatibility with standard CCGT holders and multi‑operation tool setups, making it suitable for combined drilling and light turning tasks. The coated carbide construction and the WSM01 composition provide a good balance between edge stability and resistance to thermal degradation, making the grade a practical choice for batch productions and mixed‑material workloads. The result is a tool solution that supports reliable throughput while simplifying inventory: fewer specialised grades required to cover stainless steel and high‑temperature alloys. For tailored advice on Walter Tools inserts or to discuss suitability for specific stainless steel applications, contact Metav Werkzeuge today at info@metav-werkzeuge.com or phone +49 2822 7131930. Technical data Article number: CCGT09T308-FM2-WSM01-WALTER Description: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Core specifications Plate size: 09 Plate thickness: T3 Relief angle: 7° Corner radius: 0.8 mm Tolerance class: G Features & applications Chipbreaker: FM2 Plate form: Rhombic 80° Material composition: coated carbide Suitable for: stainless steel (M), heat‑resistant superalloys and titanium (S) Applications: drilling, bore enlargement and light turning FAQ Which materials is this insert suitable for? The CCGT09T308-FM2 WSM01 insert from Walter Tools is designed for stainless steel and heat‑resistant superalloys and titanium (ISO groups M and S), offering thermal and wear resistance tailored to those materials. What does the FM2 chipbreaker deliver in practice? The FM2 chipbreaker on this insert promotes controlled chip formation and evacuation, reducing the risk of built‑up edge and supporting uninterrupted machining cycles. How does the Tiger‑tec Silver series improve tool life? Tiger‑tec Silver provides a robust coating system and substrate combination that resists thermal degradation and abrasive wear, which extends cutting edge life and enhances process reliability. What are the key geometric data to consider for tool setup? Important geometry values are the Rhombic 80° form, 0.8 mm corner radius, 7° relief angle, plate size 09 and thickness T3; these determine holder compatibility and cutting stability. Will the insert fit standard CCGT tool holders? The insert follows the CCGT designation and is intended for use in tool holders designed for CCGT‑type inserts; verification against the holder specifications is recommended. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation and identification of compatibility; no affiliation between Metav Werkzeuge and the mentioned manufacturers is implied. The offered article is an original, factory‑new product of the manufacturer.
CCGT09T308-FM2 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, secure chip control and versatile geometry for reliable productivity in stainless steels and heat‑resistant alloys — order the CCGT09T308‑FM2 WSM10S insert from Walter Tools via Metav Werkzeuge or request application advice. CCGT09T308-FM2 WSM10S indexable insert — Tiger‑tec Silver grade for stainless steels and superalloys | Walter Tools The CCGT09T308-FM2 WSM10S is a rhombic 80° indexable insert designed for productive turning and drilling operations in stainless steels and heat‑resistant superalloys, offering stable cutting edges and controlled chip formation. Tiger‑tec Silver coating for increased durability Optimised FM2 chipbreaker for stable chips Rhombic 80° shape for versatile turning 0.8 mm corner radius, 7° clearance angle Enhanced productivity through a durable coating and optimised chip control The Tiger‑tec Silver coating and the WSM10S carbide grade are combined to deliver extended tool life and dependable performance when machining demanding materials. The coating is engineered to reduce wear at elevated temperatures and to support a robust cutting edge, which translates into fewer index changes and higher uptime on the shop floor. The FM2 chipbreaker promotes consistent chip formation, lowering the risk of built‑up edge and improving surface finish in applications where heat and adhesion are primary concerns. Geometry tailored for stable results and flexible setup The rhombic 80° insert form and the specified 0.8 mm corner radius create a balance between strength and accessibility for varied turning tasks. The geometry provides secure seating and repeatable tool behaviour, which simplifies tool selection and setup across different machines. A 7° clearance angle helps to reduce rubbing at the flank face, lowering cutting forces and enabling steadier feeds; this supports process reliability in serial production and helps maintain consistent part tolerances. Application advantages in stainless steels and superalloys Classified for material groups M and S, this insert is particularly suited to rostfreie Stähle (stainless steels) and heat‑resistant alloys including titanium‑based materials. Those materials tend to generate high cutting temperatures and sticky chips; the WSM10S grade has been formulated to resist thermal softening and to maintain edge integrity. As a result, the insert helps to avoid common issues such as notch wear and accelerated flank wear, offering better cycle reliability and fewer interruptions for regrinding or index changes. Practical benefits for workshop and series production Adopting this indexable insert reduces complexity in tool inventories by covering a wide range of tough materials with one versatile grade. The improved edge stability and chip control minimise secondary operations such as manual chip removal and reduce downtime for tool changes. In addition, the coherent combination of grade, coating and chipbreaker enables predictable tool life, which assists in planning maintenance cycles and in achieving a more economical cost per finished part. For tailored recommendations on applications with Walter Tools’ CCGT09T308‑FM2 WSM10S or to verify suitability for specific stainless steel or superalloy grades, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — assistance from our technical consultants is available. Technical data SKU: CCGT09T308-FM2-WSM10S-WALTER Article designation: CCGT09T308-FM2 WSM10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM10S Numbers / Core technical data Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Plate thickness: T3 Tolerance class: G Designs / Special features Rhombic 80° insert form Chipbreaker FM2 Coated carbide (Tiger‑tec Silver) Material suitability: stainless steels (M) and superalloys/titanium (S) Execution: T FAQ What materials is this insert suitable for? The CCGT09T308‑FM2 WSM10S insert is designed for stainless steels (M) and heat‑resistant superalloys/titanium (S); the Tiger‑tec Silver grade supports stable cutting in these demanding materials. How does the FM2 chipbreaker affect performance? The FM2 chipbreaker promotes secure and consistent chip formation, reducing the risk of built‑up edge and improving surface quality when machining sticky or heat‑sensitive materials with the Walter Tools insert. Can this insert be used for both turning and drilling operations? Yes; the geometry and grade make the CCGT09T308‑FM2 WSM10S versatile for a range of turning tasks and for related drilling/reaming applications where an indexable insert solution is applicable. What is the benefit of the 0.8 mm corner radius? A 0.8 mm corner radius provides increased edge strength for interrupted cuts and longer tool life while still allowing access to smaller radii on component features. Who should be contacted for application support or further technical data? For technical advice and application checks regarding the CCGT09T308‑FM2 WSM10S insert, contact Metav Werkzeuge; their technical team can assist with cutting data and suitability for specific workpiece materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
CCGT09T308-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Benefit from enhanced tool life and stable chip formation thanks to the Tiger·tec Silver coating and the WSM20S grade, together with the FM2 chipbreaker and precise Rhombic 80° geometry for demanding machining of stainless steel and superalloys; order the insert directly via Metav Werkzeuge or ask the consultants for cutting-parameter recommendations. CCGT09T308-FM2 WSM20S — indexable insert for drilling, boring and turning (Tiger·tec Silver, FM2) The CCGT09T308-FM2 WSM20S is an indexable cutting insert designed for drilling and boring operations as well as light turning in difficult-to-machine materials, offering a Tiger·tec Silver coating and geometry optimised for process reliability. Tiger·tec Silver coated WSM20S grade Optimised FM2 chipbreaker Rhombic 80° form with 0.8 mm nose 7° relief angle for stable cutting High process security for demanding materials The coated WSM20S grade from the Tiger·tec Silver family provides a balanced combination of thermal resistance and edge stability, specifically developed for machining stainless steel (ISO group M) and heat-resistant superalloys or titanium (ISO group S). The insert’s construction reduces the risk of built-up edge and thermal damage, which translates into consistent surface quality and fewer unplanned tool changes. For production environments where reproducible results are decisive, the grade’s resistance to abrasion and controlled wear behaviour support longer uninterrupted cycles. Geometry and chip control that improve productivity The insert’s Rhombic 80° form and 0.8 mm nose radius deliver a versatile cutting point suitable for combined drilling/enlarging and finishing passes. The FM2 chipbreaker is tuned to produce manageable chips when machining sticky or heat-prone alloys, reducing rework and improving overall handling in automated and manual setups. The 7° relief angle and T3 plate thickness ensure a stable cutting edge under intermittent loads, enabling higher feed rates without compromising edge life or surface integrity. Clear application advantages and machining guidance As an indexable insert, this item is intended for use in toolholders compatible with the CCGT form, offering quick indexation and cost-efficient use of multiple cutting edges. In practice, the WSM20S grade and Tiger·tec Silver coating allow for elevated cutting speeds compared with uncoated grades while maintaining process safety; this delivers a favourable productivity-to-cost ratio in batch and series production. For parameter selection, aim for moderate cutting speeds and stable coolant application when machining stainless steel, and consider reduced depths of cut for highly alloyed, heat-resistant materials to protect the cutting edge. For machining stainless steel or superalloys with reliable tool life, contact Metav Werkzeuge to secure Walter Tools inserts and receive tailored cutting-parameter advice from the specialists at Metav Werkzeuge. Technical data SKU: CCGT09T308-FM2-WSM20S-WALTER Designation: CCGT09T308-FM2 WSM20S Product type: drilling/boring and turning indexable insert Brand: Walter Tools Facts Plate size: 09 Corner radius: 0.8 mm Relief angle: 7° Plate thickness: T3 Special features Coating: Tiger·tec Silver Grade: WSM20S Chipbreaker: FM2 Plate form: Rhombus 80° Series: Tiger-tec Silver Tolerance class: G FAQ Which materials is this insert suitable for? The CCGT09T308-FM2 WSM20S from Walter Tools is specified for stainless steel (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), matching the intended use of the WSM20S grade. What benefit does the Tiger·tec Silver WSM20S grade offer? The Tiger·tec Silver coating combined with the WSM20S substrate improves thermal resistance and edge stability, resulting in longer tool life and better reproducibility when machining sticky or heat-sensitive materials. How does the FM2 chipbreaker influence performance? The FM2 chipbreaker controls chip formation for improved evacuation and surface finish, reducing the likelihood of chip entanglement and enhancing process reliability for drilling and finishing passes. Is this insert compatible with standard CCGT toolholders? The insert follows the CCGT designation and is compatible with holders designed for that insert geometry; the component offers quick indexation to make full use of all cutting edges. For which applications is this insert most effective? Ideal for combined drilling/boring and light turning operations in production environments where reliable chip control and edge stability are required, notably in stainless steel and high-temperature alloys. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory-new merchandise from the manufacturer.
CCGT09T308-FN2 WN10 WN10 Wendeplatten - Walter Tools
The combination of a proven WN10 uncoated carbide grade, the FN2 chipbreaker and a rhombic 80° geometry delivers stable chip formation and predictable tool life; benefit from consistent performance and straightforward tooling selection. Order the CCGT09T308-FN2 WN10 directly via Metav Werkzeuge or consult the Metav experts for application-specific advice. CCGT09T308-FN2 WN10 — Indexable drilling/boring and turning insert, Rhombic 80°, Walter Tools The CCGT09T308-FN2 WN10 is an indexable carbide insert designed for drilling, boring and related turning operations, combining a rhombic 80° form with a dedicated FN2 chipbreaker for dependable chip control. Rhombic 80° insert geometry 7° clearance angle for secure seating 0.8 mm corner radius for versatility FN2 chipbreaker for consistent chip control Stable chip control that raises process reliability The combination of the FN2 chipbreaker and an uncoated cemented carbide grade provides predictable chip formation, which reduces interruptions and scrap rates during cyclic drilling or boring operations. The chipformer is designed to break and evacuate chips reliably under a range of cutting conditions, improving cycle stability. For production environments where downtime is costly, this direct effect on process reliability translates into measurable efficiency gains and reduced rework. Geometry and form that support flexible machining The rhombic 80° shape with a 0.8 mm corner radius and 7° clearance angle offers a balance between cutting edge strength and accessibility in bore entries and confined bores. The insert’s geometry allows secure seating in standard indexable holders while the corner radius supports moderate depths of cut without compromising edge life. The specified plate thickness (T3) and the 09 size suit a range of common toolholders, enabling quick changes and reduced setup complexity in mixed-production shops. Practical selection and application guidance for planners The insert is supplied in the Walter Schneidstoffsorte series and is classified under the WN10 grade; material suitability and cutting parameters should be verified against the manufacturer’s product matrix for optimal results. Where tighter tolerances or specialised materials are involved, indexing the insert and confirming holder compatibility ensures repeatable results. By focusing on key variables—chip control, edge strength and seating stability—manufacturers can plan tool use to favour throughput and predictable maintenance intervals. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts and to determine the most suitable grade and geometry for specific machining requirements Technical Data SKU: CCGT09T308-FN2-WN10-WALTER Article designation: CCGT09T308-FN2 WN10 Product type: Indexable drilling/boring and turning insert Series: Walter Schneidstoffsorte - Serie offen Grade: WN10 Chipbreaker: FN2 Facts Clearance angle: 7° Corner radius: 0.8 mm Insert shape: Rhombus 80° Size: 09 Thickness: T3 Tolerance class: G Special features Uncoated cemented carbide (catalogue-dependent) Dedicated FN2 chipbreaker for controlled chips Rhombic 80° form for versatile entry angles Designation without grade: CCGT09T308-FN2 FAQ What is the primary advantage of the FN2 chipbreaker on this insert? The FN2 chipbreaker on the CCGT09T308-FN2 WN10 promotes reliable chip segmentation and evacuation, which helps maintain consistent cycle times and reduces the risk of chip-related interruptions during drilling and boring operations. Which materials can this insert machine effectively? Material suitability for the CCGT09T308-FN2 WN10 is catalogue-dependent; consult the Walter product matrix to match the WN10 grade and insert geometry to the intended workpiece material and application. How does the rhombic 80° geometry affect tool performance? The rhombic 80° geometry provides favourable entry angles and flexibility in holder choice, offering a compromise between reach into bores and cutting edge robustness for repeated drilling or light turning tasks. Is the WN10 grade coated or uncoated? The WN10 grade for this insert is specified as an uncoated cemented carbide in the series description; refer to catalogue notes for any alternative coatings or versions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes and do not imply any affiliation. The offered article is original and brand-new from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com