Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCGT060208-MM4 WSM01 WSM01 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WSM01 grade and proven MM4 chipbreaker geometry for reliable machining of stainless steel and high‑temperature alloys; order directly through Metav Werkzeuge or ask the technical consultants for application support. CCGT060208-MM4 WSM01 rhombic 80° indexable insert for turning and boring, Tiger‑tec Silver — Walter Tools A CCGT060208-MM4 WSM01 indexable insert engineered for demanding turning and boring operations, optimised for stainless steel and heat‑resistant superalloys. Tiger‑tec Silver coating for process reliability WSM01 grade for stainless steel and superalloys Rhombus 80° form, 0.8 mm corner radius 7° relief angle for robust cutting edge Consistent machining in demanding materials The combination of the WSM01 coated carbide grade and the Tiger‑tec Silver series delivers stable chip formation and enhanced heat resistance when machining stainless steel or high‑temperature alloys. This insert is designed to resist common problems such as built‑up edge and thermal softening, which results in fewer interruptions and more predictable cycle times. The controlled wear behaviour supports repeatable part quality, so production runs maintain dimensional accuracy and surface integrity under higher cutting loads. Geometry engineered for reliable cutting and surface quality The Rhombus 80° insert form, together with a 0.8 mm corner radius and a 7° relief angle, provides a balanced contact geometry that supports robust cutting edges and stable engagement during turning and boring. The MM4 chipbreaker promotes manageable chip control under intermittent or continuous cuts, reducing the risk of workpiece damage and tool interference. These geometric choices translate into improved surface finish and longer intervals between insert changes, which benefits throughput and reduces unplanned machine downtime. Coating and grade benefits that extend tool life The Tiger‑tec Silver coating system enhances thermal protection and wear resistance, while the WSM01 formulation is tuned for the demands of stainless steel and superalloys, offering a compromise between toughness and hardness. Together they contribute to extended tool life and consistent cutting edge performance. For production environments where process reliability is paramount, this insert supports higher feed rates and stable machining windows, making it a practical choice for workshops seeking to improve productivity without sacrificing part quality. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Silver inserts, or request specific cutting data and stock information via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCGT060208-MM4-WSM01-WALTER Product designation: CCGT060208-MM4 WSM01 Product type: Indexable insert — turning/boring Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Facts Form: Rhombus 80° Relief / free angle: 7° Corner radius: 0.8 mm Size code: 06 Thickness code: 02 Tolerance class: G Special features Chipbreaker: MM4 Coating: Tiger‑tec Silver (coated carbide) Material suitability: stainless steel (M), heat‑resistant superalloys / Titanium (S) Execution code: T FAQ Which materials is this insert suitable for? The CCGT060208-MM4 WSM01 insert by Walter Tools is suitable for machining stainless steel (M) and heat‑resistant superalloys / Titanium (S) as specified for the WSM01 grade. What does the MM4 chipbreaker do? The MM4 chipbreaker on the CCGT060208-MM4 WSM01 promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip interference during turning and boring. How does Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating increases thermal resistance and reduces flank and crater wear on the CCGT060208-MM4 WSM01, leading to longer cutting edge life and greater process reliability. Can this insert be used for both turning and boring operations? Yes, the rhombic 80° form and robust geometry of the CCGT060208-MM4 WSM01 make it versatile for both turning and boring applications under demanding conditions. What is the effect of the 0.8 mm corner radius and 7° relief? A 0.8 mm corner radius provides a stronger cutting edge for improved durability, while the 7° relief angle helps maintain a stable cutting geometry and reduces rubbing on the flank face. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Markennamen and geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. There is no connection between our company and the mentioned brands. The offered article is an original, brand‑new product of the manufacturer.
CCGT060208-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Combining the Tiger·tec Silver coating with the WSM20S grade and an MM4 chipbreaker delivers reliable heat resistance and stable chip control for demanding stainless steel and superalloy work. Order the CCGT060208-MM4 WSM20S insert via Metav Werkzeuge or consult our specialists for tailored machining advice. CCGT060208-MM4 WSM20S — Drilling/Boring and Turning Indexable Insert, Tiger·tec Silver — Walter Tools The CCGT060208-MM4 WSM20S is a rhombic 80° indexable insert engineered for heavy-duty machining of stainless steel and heat-resistant alloys in demanding industrial applications. Tiger·tec Silver coating for high temperature resistance WSM20S grade optimised for stainless and superalloys Rhombus 80° geometry for versatile cutting directions MM4 chipbreaker for controlled chips and process stability Consistent performance with heat-resistant coating The combination of the Tiger·tec Silver coating and the WSM20S grade offers enhanced thermal stability and wear resistance when machining materials that generate high cutting temperatures. The coating reduces adhesion and oxidation at the cutting edge, which in turn supports a stable cutting edge and prolonged tool life. For production environments handling work-hardened stainless steels or nickel-based alloys, this means fewer tool changes and more predictable cycle times. The engineering behind the grade focuses on maintaining edge integrity under high thermal load, helping to avoid built-up edge and to keep surface finish consistent across batches. Geometry that improves chip control and surface quality The rhombus 80° form combined with a 7° relief and a 0.8 mm corner radius provides a balance between strength and accessibility for varied turning operations. The MM4 chipbreaker has been shaped to promote short, manageable chips in semi-finish and finish cuts, reducing the risk of chip entanglement and downtime. A defined corner radius supports better surface finish and distributes cutting forces to reduce the risk of edge chipping. Together, these geometric features enable reproducible machined surfaces and make the insert suitable for both interrupted cuts and continuous turning where process reliability is essential. Operational advantages and recommended applications Designed for demanding materials, the insert is particularly effective on stainless steel and heat-resistant superalloys (ISO groups M and S). The robust design and coating offer a cost-effective balance between productivity and tool life in batch production and continuous workflows. Using this insert in appropriately matched toolholders and optimised cutting data will typically result in improved process stability and fewer scrap parts. Walter Tools’ focus on consistent manufacturing quality helps ensure predictable performance across batches, supporting shops that prioritise repeatability and minimal setup variation. For application-specific guidance or to request procurement support for Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss machining parameters and delivery options. Technical data SKU: CCGT060208-MM4-WSM20S-WALTER Article: CCGT060208-MM4 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Series: Tiger-tec Silver Core dimensions Relief angle: 7° Corner radius: 0.8 mm Plate size: 06 Plate thickness: 02 Plate shape: Rhombus 80° Tolerance class: G Materials & special features Grade: WSM20S Chipbreaker: MM4 Coating: Tiger·tec Silver Suitable for: stainless steel; heat-resistant alloys and titanium (ISO groups M, S) Execution: T Basic designation: CCGT060208-MM4 FAQ What materials is this insert designed to machine? The CCGT060208-MM4 WSM20S insert from Walter Tools is formulated for stainless steel and heat-resistant superalloys (ISO groups M and S), where thermal stability and edge strength are critical. Which geometric features improve surface finish? The rhombic 80° geometry with a 0.8 mm corner radius and a 7° relief help distribute cutting forces and support a consistent surface finish when using the appropriate cutting data. How does the MM4 chipbreaker benefit production? The MM4 chipbreaker promotes controllable chip formation, reducing the risk of entanglement and aiding process stability in both semi-finish and finish operations. Is this insert suitable for interrupted cuts? Yes, the robust grade and geometry of the CCGT060208-MM4 WSM20S enable reliable performance in applications with interrupted cuts, provided the cutting parameters are adapted accordingly. Where can more machining data be obtained for this insert? Cutting data and application recommendations for the Walter Tools CCGT060208-MM4 WSM20S are available from Metav Werkzeuge; discuss material specifics and cycle requirements with their technical advisors. The Walter AG (brand: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Trademarks and trade names are the property of their respective owners. The referenced brand names serve explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the named manufacturer. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCGT060208FS-1 WDN10 WDN10 Wendeplatten - Walter Tools
Take advantage of the WDN10 PKD grade and the precise rhombic 80° geometry for durable, repeatable performance in non-ferrous and abrasive materials; the defined 0.8 mm corner radius and 7° relief angle ensure controlled chip formation and consistent surface quality. Order procurement or request technical clarification directly via Metav Werkzeuge. CCGT060208FS-1 WDN10 rhombic 80° PKD turning and boring insert by Walter Tools — 0.8 mm corner radius, 7° relief The CCGT060208FS-1 WDN10 is a rhombic 80° turning and boring insert with a polykristalliner Diamant (PKD) grade, engineered for high-wear resistance and stable cutting in non-ferrous and abrasive, non-ferrous workpieces PKD grade for high wear resistance Rhombic 80° geometry for stable cutting 0.8 mm corner radius for defined edge 7° relief angle for controlled chip flow Optimised wear resistance for abrasive, non-ferrous materials The PKD-based WDN10 grade delivers exceptional wear resistance and thermal stability when machining abrasive non-ferrous materials such as aluminium alloys with abrasive fillers and other non-ferrous, hard particles. The use of a polycrystalline diamond cutting layer reduces flank wear and extends effective tool life, which translates into fewer insert changes and more predictable production cycles. The rhombic cutting shape and the insert’s listed grade together support consistent edge integrity, improving surface finish and reducing secondary operations in many high-throughput turning and boring tasks. Stable cutting geometry that promotes precision and repeatability A controlled geometry is essential for process stability. The rhombic 80° form combined with a 0.8 mm corner radius and 7° relief angle provides a balance between edge strength and cutting action, enabling steady chip formation with the specified chipbreaker 1. This configuration lowers the risk of interrupted cuts and contributes to repeatable dimensional accuracy in serial production. For shops aiming at reproducible part quality, the defined corner radius helps maintain consistent tool engagement and reduces variation between batches. Practical application notes and process efficiency The insert is supplied in a standard size format (06 plate size, thickness 02) with tolerance class G and execution T, matching common toolholder systems for turning and boring. Given the PKD nature of the grade, this insert is particularly suited to abrasive non-ferrous materials rather than hardened steels; suitability for specific materials should be verified against the manufacturer’s product matrix. The clear geometry and robust grade can reduce cycle times by maintaining edge life and lowering the frequency of regrinding or replacement, which supports overall process efficiency and predictable maintenance planning. For tailored advice on integrating the Walter Tools CCGT060208FS-1 WDN10 insert into existing production chains or to arrange procurement through Metav Werkzeuge, contact Metav Werkzeuge for expert support and fast processing Technical data SKU: CCGT060208FS-1-WDN10-WALTER Designation: CCGT060208FS-1 WDN10 Manufacturer: Walter Tools Product type: Turning and boring insert Series: Walter Schneidstoffsorte - Serie offen Execution: T Core technical values Relief angle: 7° Corner radius: 0.8 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Chipbreaker: 1 Tolerance class: G Materials & special features Coating / grade: PKD (polykristalliner Diamant) — WDN10 Intended application: Non-ferrous and abrasive, non-ferrous materials (verify per product matrix) Strip: Walter Schneidstoffsorte - Serie offen WPL sort: WDN10 Execution note: Katalogabhängig material specification FAQ What materials is this insert intended for? The CCGT060208FS-1 WDN10 insert uses a PKD grade and is intended primarily for non-ferrous and abrasive, non-ferrous materials; material suitability should be checked against the product matrix. How does the 0.8 mm corner radius affect cutting performance? A 0.8 mm corner radius increases edge strength and supports consistent surface finish while helping to control chip formation with the specified chipbreaker geometry. Can this insert be used for steel machining? PKD grades such as WDN10 are optimised for non-ferrous and abrasive materials; they are generally not recommended for conventional steel machining—consult the product matrix for exceptions. Geschützte Marken und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCGT09T301-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver wear resistance, the FM2 chipbreaker for stable chip control and the precise Rhombus 80° geometry to reduce tool changes and secure consistent productivity; order the insert directly via Metav Werkzeuge or request advice from the consultants at Metav Werkzeuge. CCGT09T301-FM2 WSM20S rhombic 80° indexable insert with Tiger‑tec Silver coating for stainless steel — Walter Tools The CCGT09T301-FM2 WSM20S is a rhombic 80° indexable insert designed for turning and drilling applications on stainless steels and heat‑resistant alloys, offering a coated carbide grade optimised for high thermal loads Tiger‑tec Silver coating for high wear resistance Optimised FM2 chipbreaker for stable chip control Rhombic 80° form with 0.1 mm corner radius Suited to stainless steel and heat‑resistant alloys Extended tool life when machining demanding alloys The combination of the Tiger‑tec Silver coating and the WSM20S carbide grade provides a clear technical advantage when processing materials that generate heat and tend to work‑harden. The multi‑layer coating improves thermal stability and reduces flank wear, which translates into longer service life and fewer tool changes during production. Thanks to this wear protection, the insert maintains a reliable cutting edge under interrupted cuts and elevated temperatures, ensuring more predictable tool performance and lower overall operating costs. Precision geometry for consistent surface quality The Rhombus 80° plate form, a 0.1 mm corner radius and a relief angle of 7° create a geometry that balances cutting strength and accuracy. This configuration reduces cutting forces and helps to avoid built‑up edge on ductile stainless steels, resulting in improved surface finish and reduced rework. The tolerance class G further supports consistent seating in the toolholder, so run‑out and repeatability remain within narrow limits for serial production, which is particularly important for batch manufacturing and precision components. Stable chip control and process security The FM2 chipbreaker is engineered to produce short, controllable chips in materials that are otherwise prone to long, stringy swarf. Stable chip formation improves workplace safety, machine uptime and enables higher material removal rates without compromising tool life. The insert is compatible with standard indexable systems used for both turning and drilling operations, allowing straightforward integration into existing toolsets. Combined with the Walter Tools manufacturing standard, the design supports process reliability and consistent results across a wide range of stainless and high‑temperature alloys. For tailored machining recommendations and rapid supply of Walter Tools CCGT09T301‑FM2 WSM20S inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — expert advice and fast delivery are available Technical data SKU: CCGT09T301-FM2-WSM20S-WALTER Article designation: CCGT09T301-FM2 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger-tec Silver Manufacturer: Walter Tools Facts Corner radius: 0.1 mm Relief (free) angle: 7° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Coating: Tiger‑tec Silver Chipbreaker: FM2 Plate form: Rhombus 80° Grade / material group: WSM20S Suitable for: stainless steel (M); heat‑resistant alloys and titanium (S) FAQ What materials is this insert suitable for? The CCGT09T301‑FM2 WSM20S insert from Walter Tools is suitable for stainless steels and heat‑resistant superalloys/titanium, combining a coating and carbide grade designed for high thermal stress. How does the FM2 chipbreaker influence machining? The FM2 chipbreaker on this insert promotes short, manageable chips and stable chip control, which reduces downtime for chip clearing and supports safer, more efficient machining processes. Can this insert be used in existing toolholders for turning and drilling? Yes, the rhombic 80° form and standard ISO designation allow integration into compatible indexable tool systems for both turning and certain drilling/reaming operations without special adapters. What is the main benefit of the Tiger‑tec Silver coating? The Tiger‑tec Silver coating increases thermal resistance and reduces flank wear, which improves tool life and maintains consistent cutting performance under elevated temperatures and interrupted cuts. Is the corner radius suitable for finishing operations? With a 0.1 mm corner radius, the insert offers an effective compromise between edge strength and surface finish, making it suitable for fine turning where a good finish is required. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for clarification and identification of compatible products. There is no affiliation between our company and the manufacturers named. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
CCGT09T301-FN2 WNN10 Wendeplatten - Walter Tools
Taking advantage of the reliable combination of a coated carbide grade and a dedicated FN2 chipbreaker results in consistent chip control and productive machining cycles; order the insert via Metav Werkzeuge or consult the application specialists for process support. CCGT09T301-FN2 WNN10 – Drill/Boring and Turning Indexable Insert, coated carbide grade WNN10, Rhombic 80° by Walter Tools The CCGT09T301-FN2 WNN10 is a coated carbide indexable insert designed for drilling, boring and turning operations where controlled chip formation and consistent engagement are required Coated carbide grade WNN10 for versatility Rhombic 80° geometry for reliable engagement FN2 chipbreaker for stable chip control 7° clearance and 0.1 mm corner radius Stable chip control for productive machining The graded WNN10 composition combined with the FN2 chipbreaker provides predictable chip formation and evacuation, which supports uninterrupted cycles in mixed production environments. The coated carbide substrate reduces flank wear in many turning and drilling tasks while the chipbreaker geometry channels swarf away from the cutting zone, leading to fewer interruptions and a more consistent surface appearance. Material suitability should be verified in the product matrix before series production to ensure optimum results. Geometry that improves seat security and tool life The rhombic 80° shape and T3 thickness give a secure clamping interface and stable cutting engagement, while the 0.1 mm corner radius reduces peak cutting forces for improved smoothness on workpiece edges. The 7° clearance minimises rubbing on the flank face and contributes to lower cutting temperatures and extended edge retention. Together these geometric details support repeatable component tolerances and reduce the need for frequent insert changes. Easy integration and process reliability in mixed tool systems As an ISO-coded indexable insert, the plate fits standard toolholder systems for drilling, boring and turning, allowing quick replacement and reproducible positioning. The designation and chipbreaker make the insert suitable for routine workshop and production use where consistent cycle times and predictable tool behaviour are priorities. For specific workpiece materials and cutting data, reference the manufacturer’s matrix to determine the optimal cutting parameters and ensure the best balance between productivity and tool life. For application advice or availability of the Walter Tools CCGT09T301-FN2 WNN10 insert, contact Metav Werkzeuge for tailored recommendations and delivery options at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: CCGT09T301-FN2-WNN10-WALTER SKU: CCGT09T301-FN2-WNN10-WALTER Description: Drill/boring and turning indexable insert ISO designation: CCGT09T301-FN2 WNN10 Grade: WNN10 Series: Walter cutting material grade - open series Material: catalogue-dependent Core specifications Clearance angle: 7° Corner radius: 0.1 mm Plate form: Rhombus 80° Size: 09 Thickness: T3 Tolerance class: G Chipbreaker: FN2 Execution: T Special features Coated carbide grade FN2 chipbreaker for controlled chips Suitable for drilling, boring and turning operations ISO-coded insert for standard toolholders Material suitability to be checked in product matrix FAQ What materials is this insert suitable for? Material suitability must be checked in the manufacturer’s product matrix; the WNN10 coated carbide grade is designed for a broad range of general machining tasks but specific workpiece compatibility should be verified. How does the FN2 chipbreaker influence cutting performance? The FN2 chipbreaker shapes and breaks chips reliably, reducing swarf-related interruptions and improving process stability when using the CCGT09T301-FN2 WNN10 insert in drilling and turning operations. Will the Rhombic 80° form fit common toolholders? Yes, the rhombic 80° form and ISO designation enable integration into standard toolholder systems for both drilling/boring and turning indexable applications. How does the 0.1 mm corner radius affect surface finish? A 0.1 mm corner radius reduces cutting forces and helps to produce a finer edge on the workpiece, contributing to improved surface finish and reduced risk of edge chipping under appropriate cutting parameters. Is the insert suitable for high-feed or high-speed operations? The insert’s geometry and coating support productive machining; however, verified cutting data from the product matrix should be applied to determine safe feed and speed values for high-feed or high-speed scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
CCGT09T301-MN2 WN10 MN2 Wendeplatten - Walter Tools
Take advantage of a compact, application-oriented solution that combines the WN10 uncoated carbide grade with a Rhombus 80° geometry and a fine 0.1 mm corner radius for predictable finishing results; order the insert via Metav Werkzeuge or request advice from the consultants for application matching. CCGT09T301-MN2 WN10 Walter Tools boring and turning indexable insert, Rhombus 80° & 0.1 mm radius A CCGT09T301-MN2 WN10 indexable insert designed for boring and turning tasks where fine edge definition and controlled chip formation improve surface quality and process stability Rhombus 80° geometry for flexible turning 0.1 mm corner radius for fine finishing Uncoated carbide grade WN10 MN2 chipbreaker for stable chip control Reliable geometry for consistent machining performance The combination of the Rhombus 80° shape and a 7° relief angle supports versatile tool positions while maintaining a controlled cutting edge. Manufactured in an uncoated carbide grade (WN10), this insert is intended where a robust, economical cutting edge is required and where the product matrix should be consulted to confirm suitability for specific materials. Tolerances are kept to tolerance class G, which contributes to reproducible mounting and predictable tool life. As a result, process planners obtain a reproducible baseline for cycle times and component quality, reducing set-up variation across batches. Controlled chip formation and surface finish benefits The integrated MN2 chipbreaker and a 0.1 mm corner radius deliver targeted chip control and a fine surface finish on turned features. The chipbreaker geometry reduces the risk of long, stringy chips and supports consistent evacuation in both light and moderate cutting conditions, thereby decreasing the likelihood of surface damage or rework. For finishing operations, the small corner radius assists in achieving tighter surface roughness values without sacrificing edge stability, which is particularly valuable in finishing passes or when producing profiles that demand tight tolerances. Practical integration into production and handling With a plate thickness of T3 and a plate size of 09, the insert fits common tool holders while keeping the cutting edge accessible for intermittent regrinds and straightforward inspection. Marked as CCGT09T301-MN2 WN10, the insert belongs to the Walter Schneidstoffsorte - Serie offen and is supplied in execution T, enabling easy identification during tool inventory and replenishment. For applications where material compatibility or cutting data are not immediately clear, Metav Werkzeuge provides consultation to align the indexable insert selection with machining strategy and productivity targets. Contact Metav Werkzeuge for tailored application advice on Walter Tools CCGT09T301-MN2 WN10 and to confirm the optimum cutting data for specific materials Technical Data Article number: CCGT09T301-MN2-WN10-WALTER Designation: CCGT09T301-MN2 WN10 Manufacturer: Walter Tools UID: CCGT09T301-MN2-WN10-WALTER Facts Relief angle: 7° Corner radius: 0.1 mm Plate size: 09 Plate thickness: T3 Plate form: Rhombus 80° Tolerance class: G Special features Chipbreaker: MN2 Grade: WN10 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen Execution: T Application: boring and turning indexable insert FAQ What materials is this insert suitable for? The suitability depends on the product matrix; the WN10 grade is an uncoated carbide intended for general-purpose cutting—material compatibility should be checked against the machining matrix for the CCGT09T301-MN2 WN10 insert. How does the MN2 chipbreaker influence machining? The MN2 chipbreaker on this insert promotes stable chip formation and efficient evacuation, which helps maintain surface integrity and reduces interruptions due to chip entanglement. Is the corner radius suitable for finishing operations? Yes, the 0.1 mm corner radius supports fine finishing passes by producing a sharper edge form that assists in achieving lower surface roughness while retaining acceptable edge strength. Which tool holders are compatible with this plate size? The plate size 09 and T3 thickness correspond to standard indexable insert holders for rhombic 80° inserts; tool holder selection should follow the holder manufacturer’s guidelines for the CCGT09T301-MN2 WN10 geometry. What does the tolerance class G mean for mounting accuracy? A tolerance class G signifies defined manufacturing tolerances that yield consistent fit and repeatability during mounting, contributing to stable run-out and consistent part quality. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCGT09T301-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
Take advantage of the WNN10 coated-carbide grade and the MN2 chipbreaker to combine consistent chip control with reliable tool life; the rhombic 80° geometry and 0.1 mm corner radius support fine surface finish and stable cutting forces in industrial turning and bore-enlargement tasks. Order directly via Metav Werkzeuge or consult the technical team for selection support. CCGT09T301-MN2 WNN10 — Turning / Drilling Indexable Insert, Rhombic 80°, 0.1 mm by Walter Tools The CCGT09T301-MN2 WNN10 is an indexable insert designed for turning and bore-enlargement operations, offering a coated-carbide grade for versatile industrial machining applications Coated carbide grade WNN10 Rhombic 80° insert geometry 0.1 mm corner radius for fine finishes MN2 chipbreaker for stable chip control Process reliability through optimised grade and chip control The combination of the WNN10 coated-carbide grade and the MN2 chipbreaker delivers an emphasis on consistent chip formation and predictable tool life. Coated carbide grades provide a wear-resistant cutting edge that helps maintain dimension and surface quality over longer production runs, while the chipbreaker design reduces re-cutting of chips and helps avoid unexpected interruptions. These technical choices support higher uptime and reproducible results in series production. Geometry designed for surface quality and mechanical stability The rhombic 80° geometry together with a 0.1 mm corner radius and 7° clearance gives a balanced mix of strength and finishing capability. A small corner radius improves surface finish and reduces the risk of chatter on light cuts, yet still offers sufficient edge robustness for interrupted cuts when paired with the T3 thickness. Translating geometric values into practical benefits: better part finish with maintained edge life and reliable clamping in standard toolholders. Practical integration and application advice for production use The insert is supplied under the designation CCGT09T301-MN2 WNN10 and fits common toolholder systems that accept the CCGT form factor. For material-specific performance, the WNN10 grade is a coated-carbide classification; users should consult the manufacturer's product matrix to verify suitability for particular workpiece materials. Where process stability and repeatability are priorities, this insert supports optimised cutting strategies and straightforward tool change routines. Contact Metav Werkzeuge for tailored selection advice and to confirm the best Walter Tools insert for the production requirements. Technical data Article number: CCGT09T301-MN2-WNN10-WALTER Designation: CCGT09T301-MN2 WNN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Clearance angle: 7° Corner radius: 0.1 mm Insert shape: Rhombic 80° Size: 09 Thickness: T3 Tolerance class: G Special features Chipbreaker: MN2 Grade: WNN10 (coated carbide) Designation without grade: CCGT09T301-MN2 Execution: T Material note: Catalogue-dependent FAQ What materials is this insert suitable for? The CCGT09T301-MN2 WNN10 insert is a coated-carbide grade; material suitability should be verified in the Walter Tools product matrix to match workpiece materials and cutting parameters. What benefit does the MN2 chipbreaker provide? The MN2 chipbreaker on this insert supports controlled chip formation and evacuation, reducing re-cutting and improving process stability during turning and bore-enlargement operations. Why is a 0.1 mm corner radius used and what does it affect? A 0.1 mm corner radius balances surface finish and edge strength: it helps produce finer surface quality while maintaining sufficient edge robustness for many light to medium cutting tasks. Can this insert be used for both turning and bore-enlargement? The product type indicates suitability for turning and drilling/bore-enlargement applications; ensure the correct toolholder and cutting parameters are selected for the intended operation. How to confirm compatibility with a toolholder? Check the CCGT form factor and the designation CCGT09T301-MN2 against the toolholder specifications; dimensions such as size, thickness and geometry must match the holder's requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is original, brand-new merchandise from Walter Tools.
CCGT09T301M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of Cermet cutting performance and precise FP2 chip control for consistent turning and boring operations; the robust Rhombus 80° geometry and 0.1 mm corner radius support repeatable edge life. Order CCGT09T301M-FP2 WEP10C directly via Metav Werkzeuge or consult our specialists for application-specific guidance. CCGT09T301M-FP2 WEP10C — Rhombus 80° turning and boring insert by Walter Tools, Cermet grade A versatile turning and boring insert in the Walter Cermet family designed for stable finishing and semi-finishing operations in a range of machining setups. Cermet grade WEP10C for stable machining FP2 chipbreaker for reliable chip control 7° clearance angle for secure cutting Rhombic 80° insert with 0.1 mm corner radius High process reliability through material and geometry The Cermet composition of the WEP10C grade provides a balance between wear resistance and edge strength, making it suited to finishing tasks where surface quality and dimensional stability matter. The Rhombus 80° geometry concentrates cutting forces to deliver controlled engagement, while the FP2 chipbreaker reduces the likelihood of long, stringy chips. These characteristics result in reduced rework and more predictable tool changes, so cycle times become easier to plan and production flow is maintained. Practical application guidance for machining operations Intended for turning and boring applications, the insert’s 7° clearance and 0.1 mm corner radius support fine surface finishes on a variety of workpieces. The combination of geometry and cermet grade is particularly suitable for light to medium cutting depths where a consistent edge is required. For integrators and shops assessing tool choice, this insert offers a practical option for improving part quality without complex process changes; machining parameters should be selected based on the machine rigidity and material being processed. Handling, compatibility and mounting benefits The insert format CCGT09T301M-FP2 complies with common clamping systems for rhombic 80° inserts, permitting straightforward replacement in existing toolholders. The T3 plate thickness ensures stable seating and helps maintain clamping security under moderate cutting loads. Given the standardised geometry and tolerance class G, interchangeability across toolholders is simplified, supporting fast tool changes and minimal downtime in batch production. Durability, repeatability and shop-floor advantages While cermet grades prioritise finish and wear resistance, the WEP10C variant is optimised for repeatable performance over multiple parts, helping to extend index intervals in many applications. The engineered chip control provided by FP2 promotes safer chip evacuation, lowering the risk of workpiece surface damage and shortening secondary cleaning steps. In sum, adopting this insert can contribute to steadier output quality and more efficient use of operator time on the shop floor. For application recommendations or to specify CCGT09T301M-FP2 WEP10C for a particular material or holder, contact Metav Werkzeuge to discuss the best setup and compatible tooling options. Technical data Article number: CCGT09T301M-FP2-WEP10C-WALTER SKU: CCGT09T301M-FP2-WEP10C-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Core data Tolerance class: G Clearance angle: 7° Corner radius: 0.1 mm Plate size: 09 Plate thickness: T3 Special features Series: Walter Cermet Grade: WEP10C Chipbreaker: FP2 Plate form: Rhombus 80° Execution: T Material specification: Katalogabhängig FAQ Which machining tasks suit this insert best? The CCGT09T301M-FP2 WEP10C insert by Walter Tools is intended for turning and boring tasks where a stable edge and good surface finish are required; it performs well in finishing and light semi-finishing operations. What does the FP2 chipbreaker deliver in practice? The FP2 chipbreaker on the CCGT09T301M-FP2 promotes consistent chip formation and evacuation, reducing interruptions caused by poor chip control and supporting smoother production cycles. Is the 0.1 mm corner radius suitable for fine finishing? Yes, the 0.1 mm corner radius is chosen to balance edge strength and surface quality, enabling fine finishes while maintaining acceptable edge life for the WEP10C cermet grade. Can this insert be used in standard 80° holders? The Rhombus 80° form of the insert matches common 80° toolholders; ensure the holder is rated for the plate thickness T3 and the clamp system accommodates the CCGT format. How does the cermet grade affect tool life and finish? The WEP10C cermet grade focuses on wear resistance and edge stability, typically delivering improved surface quality and consistent dimensional results compared with some carbide alternatives under similar finishing conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are owned by their respective proprietors. Brand names are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer.
CCGT09T302-FL2 WPP20G WPP20G Wendeplatten - Walter Tools
Reliable wear resistance and broad suitability for steel machining combined with precise chip control deliver stable productivity and predictable tool life; order the CCGT09T302‑FL2 WPP20G through Metav Werkzeuge or consult our specialists for application-specific cutting data. CCGT09T302-FL2 WPP20G indexable turning insert – Walter Tools, Tiger‑tec Gold, for steel The CCGT09T302-FL2 WPP20G is an indexable turning insert engineered for general steel turning applications, offering a balanced combination of wear resistance and chip control for consistent production. Tiger‑tec Gold coated grade WPP20G Optimised for steel (P) machining FL2 chipbreaker for reliable chip control Rhombic 80° form with 0.2 mm corner radius Durable grade for predictable productivity The insert is supplied in the WPP20G grade from the Tiger‑tec Gold series, a coated carbide solution developed for stable wear behaviour when machining steel. This grade focuses on a compromise between wear resistance and fracture toughness so that tool life becomes more predictable across varied turning tasks. The technical coating reduces flank wear and supports higher cutting lengths per edge, which in turn contributes to fewer indexings and more continuous machine uptime. Material compatibility follows the ISO classification for group P, which denotes suitability for unalloyed and alloyed steels. Controlled chips and improved surface quality Equipped with the FL2 chipbreaker and a compact 0.2 mm corner radius, the insert promotes controlled chip formation in typical turning parameters. The Rhombic 80° geometry delivers favourable engagement angles for turning operations, improving surface contact and minimising vibration. These features help achieve a consistent surface finish and reduce secondary operations. In practical terms, the chip geometry limits long, stringy chips in medium-to-heavy cuts and aids evacuation in automated environments, which supports overall process reliability. Robust edge design for stable cutting performance A relief angle of 7° combined with a T3 plate thickness and tolerance class G ensures a robust seat fit and repeatable positioning in the toolholder. The insert’s execution labelled “T” contributes to mechanical stability at the cutting edge, reducing the risk of edge chipping under interrupted cuts or tougher workpiece conditions. Together, these specifications permit stable cutting parameters and encourage higher material removal rates while maintaining predictable tool behaviour over multiple regrinds or indexings. Practical application and selection guidance This insert is particularly suited to general-purpose turning of steels, including unalloyed and alloyed grades commonly encountered in industrial workshops. When optimising for productivity, the WPP20G grade allows a compromise between feed and speed—favouring throughput without sacrificing edge life. For critical or unfamiliar applications, Metav Werkzeuge can provide recommended speeds, feeds and depth-of-cut values based on the specific workpiece alloy and machine characteristics, ensuring the insert’s performance aligns with operational targets. For reliable, Tiger‑tec Gold performance from Walter Tools, contact Metav Werkzeuge to discuss exact cutting parameters and delivery options and secure the CCGT09T302‑FL2 WPP20G for immediate integration into production. Technical data Article number: CCGT09T302-FL2-WPP20G-WALTER Designation: CCGT09T302-FL2 WPP20G Product type: Indexable turning insert Manufacturer: Walter Tools Core technical data Corner radius: 0.2 mm Relief angle: 7° Plate form: Rhombic 80° Insert size: 09 Plate thickness: T3 Tolerance class: G Special features Grade: WPP20G (Tiger‑tec Gold coated carbide) Chipbreaker: FL2 Material application: Steel (P) Series: Tiger‑tec Gold Execution: T ISO designation: CCGT09T302-FL2 WPP20G FAQ What materials is this insert suitable for? The CCGT09T302‑FL2 WPP20G is designed for steel (P) applications and performs well on unalloyed and alloyed steels according to ISO P group guidance. What does the WPP20G grade mean for tool life? WPP20G is a Tiger‑tec Gold coated carbide grade that balances wear resistance and toughness, providing extended edge life under typical steel turning conditions. How does the FL2 chipbreaker affect machining? The FL2 chipbreaker promotes reliable chip control and evacuation, reducing the risk of long, tangled chips and improving workpiece surface quality. Is the insert suitable for interrupted cuts or roughing? The insert’s 0.2 mm corner radius and robust execution support moderate interrupted cuts; for heavy roughing the grade’s toughness offers resistance to edge chipping while maintaining wear performance. What mounting and seat tolerances are relevant for this insert? This insert is supplied with tolerance class G and a T3 plate thickness; correct toolholder seating with matching tolerance ensures repeatable positioning and stable cutting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product from the manufacturer Walter Tools.
CCGT09T302-FL2 WSM01 WSM01 Wendeplatten - Walter Tools
Benefit from a reliable combination of a heat‑resistant Tiger‑tec Silver grade, an FL2 chipbreaker for controlled chip formation and a fine 0.2 mm corner radius that supports excellent surface finish; this yields improved process stability and extended tool life in demanding applications. Order the inserts via Metav Werkzeuge or request tailored machining advice from the consultancy team. CCGT09T302-FL2 WSM01 – turning indexable insert, FL2 chipbreaker, 0.2 mm radius | Walter Tools The CCGT09T302-FL2 WSM01 is a rhombic 80° turning insert engineered for precision turning of stainless steels and heat‑resistant superalloys, offering stable cutting edges and consistent chip control. Tiger‑tec Silver coated grade for durability FL2 chipbreaker for controlled chip formation Suitable for stainless steel and superalloys Rhombic 80° geometry for versatile turning Consistent chip control and improved surface quality The combination of the FL2 chipbreaker and the rhombic 80° form delivers predictable chip flow and reduced risk of built‑up edge when machining ductile, work‑hardening materials. The insert’s 0.2 mm corner radius supports fine finishing passes while maintaining edge strength for light to moderate depths of cut. For production environments where repeatable surface quality is critical, the insert’s geometry reduces vibration and improves consistency, which helps lower rework rates and keeps cycle times steady. Heat‑resistant grade for demanding materials The WSM01 grade from the Tiger‑tec Silver series is a coated carbide formulation designed for the thermal and mechanical stresses encountered with stainless steel and high‑temperature alloys. The coating improves wear resistance and supports stable edge retention under elevated cutting temperatures, which translates into longer tool life and fewer indexings. In practical terms, operators can expect enhanced process reliability on prolonged turning operations of materials that tend to work‑harden or generate high cutting heat. Versatile fit and application scope With the standard CCGT09 insert size and T3 thickness, this indexable solution integrates with common rhombic 80° toolholders for external and light profiling work. The 7° clearance angle reduces rubbing on the flank face and assists in maintaining dimensional accuracy during finishing cuts. The insert is suitable for a range of turning tasks where a balance between edge strength and fine finish is required, including serial production and single‑piece manufacturing of components in corrosion‑resistant steels and nickel‑base alloys. Contact Metav Werkzeuge for application guidance and to reserve CCGT09T302-FL2 WSM01 Tiger‑tec Silver inserts for high‑duty stainless and superalloy turning Technical Data SKU: CCGT09T302-FL2-WSM01-WALTER Product: Turning indexable insert Designation: CCGT09T302-FL2 WSM01 Brand: Walter Tools Core data Clearance angle: 7° Corner radius: 0.2 mm Insert size: 09 (CCGT09) Thickness: T3 Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: FL2 Geometry: Rhombic 80° Material application: S / M (superalloys / stainless steel) FAQ Which materials are recommended for this insert? The CCGT09T302-FL2 WSM01 insert is recommended for stainless steel (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), reflecting the WSM01 grade’s focus on thermal stability and secure chip formation. How does the FL2 chipbreaker affect machining performance? The FL2 chipbreaker promotes consistent chip control and reduces the tendency for long, stringy chips when machining ductile materials; paired with the Tiger‑tec Silver grade it helps maintain a stable cutting edge for longer tool life. What advantages does the 0.2 mm corner radius offer? A 0.2 mm radius delivers a compromise between a fine surface finish and adequate edge strength, making it suitable for finishing passes and light to moderate turning where dimensional accuracy and surface quality are priorities. Is the insert compatible with standard CCGT toolholders? Yes, the rhombic 80° form and CCGT09 size are compatible with standard toolholders designed for this insert format, allowing integration into common turning setups. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group. Protected trademarks and product names belong to their respective owners. Brand names are used for identification and comparison only; there is no affiliation between Metav Werkzeuge and the named brands. The offered item is a brand‑new original product from the manufacturer.
CCGT09T302-FM2 WMP20G FM2 Wendeplatten - Walter Tools
Taking advantage of the combination of a Tiger·tec Gold coating and a grade optimised for rostfreier Stahl ensures reliable chip control and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. CCGT09T302-FM2 WMP20G — indexable turning insert for rostfreier Stahl by Walter Tools A CCGT09T302-FM2 WMP20G indexable insert designed for robust turning applications in rostfreier Stahl, combining a Tiger·tec Gold coating with a dedicated chipbreaker for stable cutting performance. Tiger·tec Gold coating for improved wear resistance Grade WMP20G tuned for rostfreier Stahl machining Rhombic 80° geometry for versatile turning operations 7° clearance and 0.2 mm corner radius for edge stability Maximise process reliability with advanced coating technology The Tiger·tec Gold coating and the WMP20G grade deliver a measurable improvement in cutting-edge longevity and consistency when machining rostfreier Stahl. The combination of a wear-resistant surface layer and an optimised carbide substrate reduces edge breakdown under the high temperatures and built-up edge tendencies typical of such alloys. This results in steadier tool life and more predictable replacement intervals, supporting higher uptime in production environments and fewer unplanned interventions. Designed geometry that supports stable chip formation and surface quality A rhombic 80° insert form with a small corner radius (0.2 mm) and a 7° clearance angle gives a balance between strength and accessibility for external turning. The integrated FM2 chipbreaker controls chip flow for medium to heavier feeds, promoting consistent surface finish and safer chip evacuation. For operators transitioning from general-purpose grades, the geometry helps maintain process windows while limiting vibrations and chatter, which means fewer reworks and improved component tolerances. Practical handling and application benefits for workshop use The insert’s T3 thickness and standard size designation simplify toolholder compatibility and inventory management across mixed toolrooms. A coated carbide solution with a focus on rostfreier Stahl reduces the need for frequent grade changes and supports varied production runs. In addition to technical advantages, the insert’s predictable wear behaviour contributes to planning efficiency: tooling strategies can be based on repeatable life data rather than conservative estimates, improving overall cost-efficiency per component. Contact Metav Werkzeuge today to discuss how the Walter Tools CCGT09T302-FM2 WMP20G insert can be integrated into existing tool systems and to receive tailored cutting data and ordering support Technical Data Article number: CCGT09T302-FM2-WMP20G-WALTER Designation: CCGT09T302-FM2 WMP20G Manufacturer: Walter Tools Core figures Clearance angle: 7° Corner radius: 0.2 mm Plate size: 09 Thickness: T3 Design & special features Coating: Tiger·tec Gold Grade: WMP20G (coated carbide) Chipbreaker: FM2 Plate form: Rhombus 80° Tolerance class: G Series: Tiger-tec Gold Material application: rostfreier Stahl FAQ What materials is this insert suited for? The CCGT09T302-FM2 WMP20G insert from Walter Tools is specially formulated for machining rostfreier Stahl and is optimised for the toughness and heat behaviour of those alloys. Which chipbreaker should be used for medium to heavy cutting? The FM2 chipbreaker integrated on this insert supports stable chip formation in medium to robust cutting conditions, making it suitable for a range of turning operations on rostfreier Stahl. Is this insert compatible with standard rhombic 80° toolholders? Yes, the rhombic 80° form and standard size designation enable use in compatible indexable toolholders designed for this geometry. How does the Tiger·tec Gold coating benefit production runs? Tiger·tec Gold provides improved wear resistance and thermal stability, which extends edge life and reduces variation in tool life during serial production with rostfreier Stahl. What tolerance and edge characteristics does this insert offer? The insert is supplied in tolerance class G with a 0.2 mm corner radius and a 7° clearance angle, balancing edge strength with accessibility for external turning applications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
CCGT09T302-FM2 WSM01 WSM01 Wendeplatten - Walter Tools
Boasting a Tiger‑tec Silver coating and the WSM01 coated‑carbide grade, this insert combines durable edge stability with secure chip control for heavy‑duty machining of stainless steel and heat‑resistant alloys; order the item directly via Metav Werkzeuge or contact our consultants for tailored cutting data. CCGT09T302-FM2 WSM01 indexable insert for drilling and turning, Tiger‑tec Silver, rhombic 80° — Walter Tools CCGT09T302-FM2 WSM01 is an indexable insert engineered for demanding drilling, reaming and turning operations in stainless steel and superalloy materials Tiger‑tec Silver coating for edge stability Designed for stainless steel and superalloys Rhombic 80° form for versatile cutting 0.2 mm corner radius for precise finishes Consistent cutting performance in tough materials The combination of Tiger‑tec Silver surface treatment and the WSM01 coated‑carbide grade delivers reliable wear resistance and stable cutting edge life when machining demanding materials. Designed for applications in stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), this insert offers a predictable tool life that supports process planning and reduces unexpected downtime. The specification supports higher cutting parameters where appropriate, improving throughput without compromising surface quality or tool reliability. Secure chip control and improved surface finish Equipped with the FM2 chipbreaker and a rhombic 80° geometry, the insert provides effective chip formation and evacuation in interrupted and continuous cuts. The modest 0.2 mm corner radius helps produce consistent component edges and improves dimensional repeatability in finish passes. Together, these features reduce the need for secondary operations, enabling a leaner machining cycle and contributing to a lower overall production cost per part while maintaining the required surface integrity. Flexible geometry for multiple operations The insert’s 7° relief and T3 thickness create a balanced geometry suitable for combined drilling and turning toolholders where radial and axial engagement vary. The rhombic shape allows easy adjustment of cutting lead angles and offers favourable entry characteristics for reaming and bore finishing. This adaptability means fewer tool changes and simplified inventory management while maintaining cutting stability across a range of workpiece geometries and machining strategies. Process security and predictable results By using a coated‑carbide grade optimised for poor thermal conductivity materials, the insert supports secure chip formation and stable wear patterns even under elevated cutting temperatures. The result is enhanced process security and consistent component quality over longer production runs. For complex or high‑value components where repeatability is critical, the insert’s specifications help to standardise machining recipes and reduce scrap rates through predictable performance. For application advice and cutting data tailored to Walter Tools inserts such as the CCGT09T302-FM2 WSM01, contact Metav Werkzeuge for concise consultation and documented recommendations: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: CCGT09T302-FM2-WSM01-WALTER Designation: CCGT09T302-FM2 WSM01 Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM01 Facts Relief angle: 7° Corner radius: 0.2 mm Insert shape: Rhombus 80° Insert size: 09 Thickness: T3 Tolerance class: G Special features Chipbreaker: FM2 Suitable for stainless steel (M) and heat‑resistant superalloys/titanium (S) Coated carbide grade WSM01 Rhombic geometry for versatile cutting engagement Stable cutting edge for heavy‑duty machining FAQ Which materials can be machined with this insert? The CCGT09T302-FM2 WSM01 insert from Walter Tools is specified for machining stainless steel (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), offering a balance of wear resistance and edge stability for these challenging materials. What chipbreaker does the insert use and why does it matter? This insert features the FM2 chipbreaker, which optimises chip formation and evacuation in both continuous and interrupted cuts, improving process reliability and surface finish when using the CCGT09T302-FM2 WSM01 in turning and drilling applications. How does the rhombic 80° shape affect tool use? The rhombic 80° geometry provides a versatile cutting angle that supports different approach geometries and reduces cutting forces on entry, making it suitable for a range of toolholder setups and enabling the CCGT09T302-FM2 WSM01 to perform both roughing and finishing tasks. Why choose a Tiger‑tec Silver series insert? Inserts in the Tiger‑tec Silver series combine a hard, wear‑resistant coating with a substrate designed for thermal stability; this yields longer tool life and consistent performance, particularly under the thermal loads encountered when machining stainless steel and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names remain the property of their respective owners. Brand names and registered trademarks are used solely for explanatory purposes. There is no affiliation between our company and the named manufacturers. The offered article is original factory‑new goods of the manufacturer.
CCGT09T302-FM2 WSM20S FM2 Wendeplatten - Walter Tools
Take advantage of a high-performance indexable insert designed for productive machining of tough alloys and rostfreier Stahl; the combination of Tiger·tec Silver coating and the FM2 chipbreaker delivers stable chip control and extended edge life. Order directly via Metav Werkzeuge or contact the consultants for tailored application advice. CCGT09T302-FM2 WSM20S turning and drilling indexable insert by Walter Tools — coated carbide for rostfreier Stahl and heat-resistant alloys CCGT09T302-FM2 WSM20S is an indexable insert for drilling and turning applications, engineered for secure chip formation and durable cutting performance in demanding materials Tiger·tec Silver coated carbide grade FM2 chipbreaker for controlled chips Rhombic 80° geometry with 7° relief 0.2 mm corner radius, T3 plate thickness Consistent performance in tough materials The combination of a coated carbide substrate with the Tiger·tec Silver technology provides a balance of wear resistance and heat management that benefits high-temperature alloys and rostfreier Stahl. The chosen grade WSM20S is tailored for applications where thermal load and built-up edge are risks; it supports continuous cutting and reduces the need for intermediate dressing. By integrating a dedicated FM2 chipbreaker, the insert promotes reproducible chip segments and controlled evacuation, which leads to more stable cycles and fewer unexpected interruptions. This results in measurable improvements in process reliability and overall throughput for production environments that machine difficult-to-cut materials. Longer edge life and reliable surface quality A 0.2 mm corner radius together with the Rhombic 80° shape and 7° relief angle optimises cutting mechanics: the geometry reduces impact loads on the cutting edge while maintaining contact stability. The coated surface reduces adhesive wear and helps preserve a sharp cutting edge over longer tool life, which in turn enhances part surface finish and dimensional repeatability. For shops where consistent component quality and reduced rework are priorities, this insert lowers the risk of premature edge failure and supports tighter tolerances without complex parameter changes. Versatile use in drilling and turning operations Designed as a dual-purpose solution for drilling/boring and turning indexable toolholders, the insert enables fewer tool variants and faster changeovers in mixed-production setups. The T3 plate thickness and the compact 09 plate size offer rigidity appropriate for a range of holders while keeping vibration sensitivity low. As an indexable insert from Walter Tools, it is suited to machining sequences that combine roughing and semi-finishing passes in rostfreier Stahl and heat-resistant superalloys, where controlled chip formation and edge stability are essential. For application-specific data or to confirm suitability for a particular operation, Metav Werkzeuge provides technical consultation and cutting-parameter recommendations. Discuss application-specific optimisation with Metav Werkzeuge to identify the ideal Walter Tools Tiger·tec Silver insert and holder combination for high-temperature alloys and rostfreier Stahl machining Technical Data Article number: CCGT09T302-FM2-WSM20S-WALTER Designation: CCGT09T302-FM2 WSM20S Manufacturer: Walter Tools Core data Plate form: Rhombic 80° Plate size: 09 Plate thickness: T3 Relief angle: 7° Corner radius: 0.2 mm Grade/series: WSM20S / Tiger·tec Silver Tolerance class: G Special features Coating technology: Tiger·tec Silver Chipbreaker: FM2 Material group suitability: M (rostfreier Stahl), S (heat-resistant superalloys, titanium) Substrate: coated carbide Execution: T (plate form detail) FAQ What materials is this insert suitable for? The CCGT09T302-FM2 WSM20S insert from Walter Tools is designed for rostfreier Stahl (ISO group M) and for heat-resistant superalloys or titanium (ISO group S), providing stable cutting under high thermal loads. How does the FM2 chipbreaker affect machining? The FM2 chipbreaker on the CCGT09T302-FM2 promotes controlled chip segmentation and reliable evacuation, improving process stability and reducing the risk of chip-related interruptions during turning or drilling operations. What are the key geometry specifications of the insert? The insert is a Rhombic 80° form with a 0.2 mm corner radius, 7° relief angle, plate size 09 and thickness T3, selected to balance edge strength with fine surface results. Is the insert coated and what does the coating deliver? Yes — the WSM20S grade uses Tiger·tec Silver coating on a coated-carbide substrate to enhance wear resistance and thermal protection, extending tool life in demanding applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCGT09T302-FN2 WN10 FN2 Wendeplatten - Walter Tools
Combine the cost-effective uncoated carbide of the WN10 grade with the FN2 chipbreaker and rhombic geometry to secure stable chip formation and consistent performance in drilling, boring and turning operations; order the CCGT09T302-FN2 WN10 directly via Metav Werkzeuge or consult the specialists for application advice. CCGT09T302-FN2 WN10 — Indexable insert for drilling, boring and turning, Walter Tools (Rhombus 80°, FN2) The CCGT09T302-FN2 WN10 is an indexable cutting insert designed for general turning and boring tasks where controlled chips and predictable wear are priorities Rhombic 80° insert geometry Controlled chips with FN2 breaker 7° clearance angle for versatile cuts 0.2 mm corner radius, T3 thickness Increased productivity through reliable chip control The FN2 chipbreaker and the uncoated carbide grade provide a dependable basis for stable chip formation during interrupted cuts and varied feed conditions. This design reduces manual intervention at the machine, improving cycle efficiency and lowering secondary operations. By combining a proven chipbreaker with a compact rhombic face, the insert supports consistent chip evacuation, which translates into fewer tool changes and more productive machining time. The careful balance of geometry and edge toughness aims to deliver measurable gains in throughput for production-focused workshops. Access and accuracy via geometry and edge specification The rhombic 80° geometry with a 7° clearance angle enables good tool access in both external and internal turning, while the 0.2 mm corner radius offers a compromise between strength and surface finish. This geometry reduces the risk of edge chipping on light interruptions and helps maintain tolerance control on turned features. The T3 thickness contributes to insert stability in the pocket, which aids repeatable results on medium-duty operations. Together, these features support accurate component dimensions and predictable surface quality in series production. Grade behaviour and material suitability explained The WN10 designation denotes an uncoated carbide grade intended for a range of general applications; it provides a robust cutting edge and straightforward re-sharpening behaviour. Material compatibility should be verified against the manufacturer's product matrix before final selection, as the uncoated grade is optimised for certain base materials and feed/speed combinations. Selecting this grade typically favours applications where a consistent edge is required and coating benefits are not essential. For specific workpiece materials or elevated cutting speeds, the insertion of a coated alternative might be considered. Practical application notes and mounting guidance The insert size 09 and the CCGT style ensure straightforward mounting in standard toolholders for turning and boring. Correct clamping and using the recommended insert seat reduce vibration and improve tool life; the combination of FN2 chip control and the insert's profile aids stability during intermittent cuts or small-diameter boring. Where possible, validate cutting parameters in a trial cut and adapt feeds to chip form. If there is uncertainty about suitability for a particular job, the Metav Werkzeuge team can provide machining advice and parameter recommendations based on the workpiece material and machine dynamics. Contact Metav Werkzeuge for tailored application recommendations on the Walter Tools CCGT09T302-FN2 WN10 and arrange ordering or technical consultation directly with Metav Werkzeuge Technical data Article number: CCGT09T302-FN2-WN10-WALTER Designation: CCGT09T302-FN2 ISO designation: CCGT09T302-FN2 WN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Insert size: 09 Thickness: T3 Corner radius: 0.2 mm Clearance angle: 7° Shape: Rhombus 80° Chipbreaker: FN2 Tolerance class: G Special features Grade: WN10 (uncoated carbide) Application: drilling, boring, turning Material: catalogue-dependent Execution: T Recommended for stable chip formation and general turning tasks FAQ What materials is this insert suited for? Material suitability depends on the specific WN10 product matrix; the CCGT09T302-FN2 WN10 is an uncoated carbide grade designed for general applications, so check the manufacturer matrix for exact workpiece recommendations. How does the FN2 chipbreaker affect machining? The FN2 chipbreaker on the insert promotes controlled chip formation and evacuation, which helps reduce recutting and improves cycle reliability during turning and boring operations. Is the 0.2 mm corner radius suitable for finishing? A 0.2 mm corner radius balances strength and surface finish; the insert can produce good finishes on medium feeds but very fine finishing may require smaller radii or dedicated finishing grades. Can the insert be used for internal boring as well as external turning? Yes; the rhombic 80° geometry and 7° clearance angle enable versatile access for both internal and external operations when mounted in appropriate toolholders. How should cutting parameters be established for this insert? Establish parameters via a short trial cut, considering the WN10 grade and machine dynamics; Metav Werkzeuge can assist with parameter recommendations for the CCGT09T302-FN2 WN10 based on the workpiece material. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanation only; there is no affiliation between our company and the mentioned brands. The item offered is an original, factory-new product of the manufacturer.
CCGT09T302-FN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide grade WNN10, defined 0.2 mm corner radius and an FN2 chipbreaker for predictable chip control and stable cutting; order the insert directly via Metav Werkzeuge or request application advice from our consultants. CCGT09T302-FN2 WNN10 indexable insert — Rhombic 80°, 0.2 mm corner radius (Walter Tools) The CCGT09T302-FN2 WNN10 is an indexable insert intended for drilling and turning tasks, offering a robust coated carbide grade for industrial machining applications *Coated carbide WNN10 for consistent wear resistance *Rhombic 80° geometry for stable cutting performance *0.2 mm corner radius for defined edge strength *FN2 chipbreaker for controlled chip formation Consistent machining performance through targeted geometry and grade The combination of WNN10 and coated carbide provides a balance between wear resistance and edge life that supports repeatable machining cycles. The rhombic 80° geometry increases support at the cutting edge, which improves stability when used in indexable toolholders designed for rhombic inserts. The small 0.2 mm corner radius contributes to a defined edge that resists chipping while maintaining acceptable surface finish; the modest 7° clearance angle reduces rubbing and helps keep cutting forces predictable. These characteristics together enable a measurable improvement in process reliability without sacrificing tool life. Reduced rework thanks to controlled chip formation The FN2 chipbreaker is designed to promote controlled chip formation, easing chip evacuation in many common turning and drilling operations. Controlled chips reduce the risk of surface damage and machine interruptions, which in turn lowers the probability of secondary operations. When paired with the right cutting data and toolholder, the chip geometry delivered by this insert helps maintain coolant access and stable cutting temperatures. Material suitability should be confirmed in the product matrix to ensure optimal chip behaviour for the specific application. Clear dimensions and tolerances for predictable setup Dimensionally the insert presents a T3 thickness, size 09 seating and tolerance class G, which make tool setup and repeatability straightforward in standard clamping systems. These measurable values simplify tool change planning and inventory management, since the format aligns with common indexable insert specifications. The defined geometry and tolerance aid in achieving consistent clamping contact and axial positioning, reducing setup variation between tool changes and across multiple machines. Brand reliability and application-focused design Manufactured by Walter Tools, the insert benefits from a practical design philosophy aimed at stable machining and predictable results. The open-series cutting grade allows technicians to select the grade variant that best fits the workpiece and operation when consulting the product matrix. Choosing an insert from an established brand contributes to process consistency and easier integration into existing machining strategies, particularly where reproducibility and stable edge life are priorities. Discuss application matching with Metav Werkzeuge to select the correct grade variant and cutting data for production — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to review the CCGT09T302-FN2 WNN10 insert for specific machining tasks Technical data Article number: CCGT09T302-FN2-WNN10-WALTER Designation: CCGT09T302-FN2 WNN10 Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Data Clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 09 Thickness: T3 Chipbreaker: FN2 Tolerance class: G Special features Coating: Katalogabhängig Material: Katalogabhängig Grade: WNN10 (coated carbide) Construction: Open series cutting grade FAQ What materials is this insert suitable for? The CCGT09T302-FN2 WNN10 insert is a coated carbide grade; material suitability must be checked in the product matrix to ensure the WNN10 grade matches the workpiece material and machining strategy. How does the FN2 chipbreaker improve production? The FN2 chipbreaker promotes controlled chips that evacuate reliably, reducing the likelihood of surface damage, machine stoppages and consequent rework during turning and drilling operations. Is the 0.2 mm corner radius suitable for finishing? A 0.2 mm corner radius offers a compromise between edge strength and surface finish; it is commonly used for medium finishing operations where some robustness is required without sacrificing surface quality. Which toolholders accept this insert geometry? The rhombic 80° form and size 09 designation are compatible with indexable toolholders designed for rhombic CCGT-style inserts; ensure the holder supports the specified T3 thickness and seating angle. How can repeatable results be achieved with this insert? Maintain consistent clamping torque, confirm seating cleanliness, observe the tolerance class G, and use cutting parameters recommended in the product matrix and Walter Tools documentation for repeatable performance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CCGT09T302-MN2 WN10 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of precise geometry, reliable chip control and catalogue‑dependent material options for consistent turning and boring performance; order the insert directly via Metav Werkzeuge or consult the technical team for application support. CCGT09T302-MN2 WN10 indexable insert, Rhombic 80° (T3) – Walter Tools The CCGT09T302-MN2 WN10 is a rhombic 80° indexable insert for turning and boring applications, featuring an MN2 chipbreaker and a 0.2 mm corner radius for controlled cutting results. Rhombic 80° geometry MN2 chipbreaker for controlled chips 0.2 mm corner radius for precision Uncoated WN10 carbide grade Reliable chip control that keeps cycles productive The combination of the MN2 chipbreaker and the open Walter grade provides predictable chip formation, which reduces downtime linked to chip clearing and improves process stability. Thanks to the controlled breakage behaviour, chip evacuation is more consistent when machining with moderate feeds and varied depths of cut; this supports smoother toolpaths and fewer interruptions on automated lathes. The insert’s design helps maintain cutting forces within expected ranges, supporting repeated production runs with steady part quality. Geometry engineered for accurate profiles and tool life With a Rhombic 80° shape and a 0.2 mm corner radius, the insert balances strength and detail: the geometry permits stable engagement for heavier cuts while still enabling fine profile definition where small radii are required. The specified 7° clearance angle reduces rubbing at flank contact and helps avoid thermal build‑up at the cutting edge. The T3 thickness adds mechanical rigidity and the tolerance class G contributes to reproducible seating in the toolholder, all of which combine to prolong effective cutting life and maintain dimensional accuracy. Process reliability through standardised grade and form The insert is supplied in the Walter open grade series WN10, an uncoated cemented carbide type intended for general turning tasks; suitability for specific workpiece materials should be verified in the product matrix. The standardised CCGT form ensures compatibility with a broad range of turning toolholders, simplifying tooling logistics. Because the design emphasises repeatable performance and straightforward indexing, workshops benefit from reduced setup variability and quicker tool changes, contributing to measurable productivity gains over multiple shifts. Practical selection advice and application support Selection for a given job should consider workpiece material, cutting speed and machine rigidity; the grade and chipbreaker combination here is a pragmatic choice for many conventional turning and boring operations. For complex alloys or specialised finishing requirements, consult the product matrix and request cutting data to match feeds and speeds to the tool system. Additional application guidance and tailored recommendations are available to ensure the insert meets the exact production needs without trial‑and‑error. Contact Metav Werkzeuge for tailored cutting data and delivery options for Walter Tools CCGT09T302-MN2 WN10 indexable inserts Technical data Article number: CCGT09T302-MN2-WN10-WALTER Name / designation: CCGT09T302-MN2 WN10 Product type: Boring / turning indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Clearance angle: 7° Corner radius: 0.2 mm Geometry: Rhombus 80° Plate size: 09 Thickness: T3 Tolerance class: G Special features Chipbreaker: MN2 Grade: WN10 (uncoated cemented carbide) Material: catalogue dependent Application: turning and boring operations Plate form: Rhombus 80° FAQ What machining tasks suit this insert best? The CCGT09T302-MN2 WN10 insert from Walter Tools is designed for general turning and boring tasks where controlled chip formation and a small corner radius are required. Is the WN10 grade coated or uncoated? The WN10 grade used in this insert is an uncoated cemented carbide grade; suitability for specific materials should be checked in the product matrix. What does the MN2 chipbreaker provide in practice? The MN2 chipbreaker on the CCGT09T302-MN2 WN10 promotes consistent chip control, which helps maintain machine uptime and reduces manual chip handling during turning operations. Can this insert be used for finishing and roughing? The rhombic 80° geometry and 0.2 mm corner radius make the insert adaptable for both moderate finishing and general roughing operations, depending on cutting parameters and workpiece material. How to obtain cutting data and compatibility details? For cutting data and toolholder compatibility for the CCGT09T302-MN2 WN10 indexable insert by Walter Tools, contact Metav Werkzeuge for tailored recommendations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
CCGT09T302-MN2 WNN10 Wendeplatten - Walter Tools
The combination of a coated carbide WNN10 grade, a Rhombus 80° geometry and the MN2 chipbreaker delivers controlled chip formation and stable cutting behaviour for mixed turning and drilling tasks; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. CCGT09T302-MN2 WNN10 – Drill/turn indexable insert by Walter Tools, Rhombus 80°, MN2 chipbreaker The CCGT09T302-MN2 WNN10 is a coated cemented carbide indexable insert designed for combined drilling and turning operations where consistent chip control and repeatable edge performance are required Coated carbide grade WNN10 for stability Rhombic 80° shape for versatile clamping 0.2 mm corner radius for precision finishes MN2 chipbreaker for controlled chip formation Reliable geometry for efficient chip control and process stability The insert’s geometry combines a Rhombus 80° shape with an optimised MN2 chipbreaker, which together support predictable chip flow and reduced risk of edge build-up. The coated cemented carbide WNN10 grade provides a balance between wear resistance and toughness, making the component suitable for a range of workshop tasks where consistent cutting performance is needed. These design choices reduce downtime from unstable chips and contribute to smoother cycle times on multi-operation machines. Precision edge and surface quality for finishing-sensitive components A 0.2 mm corner radius and a relief angle of 7° produce a controllable cutting edge that helps achieve uniform surface finishes while maintaining dimensional accuracy. The moderate corner radius supports fine finishing without sacrificing edge strength during interrupted cuts or entry/exit conditions. The insert thickness T3 and tolerance class G ensure mechanical stability in robust toolholders, helping to maintain repeatable part quality across batches. Practical guidance: selection, clamping and application checks Selection of the correct grade and geometry should be guided by the specific product matrix and the workpiece material; the series is listed as Walter Schneidstoffsorte - Serie offen, so material suitability must be verified in the product matrix. The insert’s Rhombus 80° form allows flexible clamping in standard turning and drilling toolholders. For operations with high cutting speeds or special materials, verify compatibility with the WNN10 coating and chipbreaker performance to ensure optimal wear behaviour and tool life. For application recommendations or to discuss suitability for specific materials, contact Metav Werkzeuge for expert advice at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants assist with selection and process optimisation for Walter Tools inserts Technical data Article number: CCGT09T302-MN2-WNN10-WALTER Designation: CCGT09T302-MN2 WNN10 Type: Drill/turn indexable insert Manufacturer: Walter Tools Core specifications Relief angle: 7° Corner radius: 0.2 mm Insert size: 09 Thickness: T3 Tolerance class: G Special features Coated cemented carbide grade WNN10 Chipbreaker: MN2 Insert shape: Rhombus 80° Series: Walter Schneidstoffsorte - Serie offen Material: catalogue dependent FAQ What machining tasks is this insert suitable for? The CCGT09T302-MN2 WNN10 insert by Walter Tools is intended for combined drilling and turning operations where controlled chip formation and repeatable edge performance are priorities. How does the MN2 chipbreaker affect cutting? The MN2 chipbreaker on this insert promotes short, manageable chips and supports consistent evacuation, which improves process reliability during both drilling and turning. Is the WNN10 grade suitable for all materials? WNN10 is a coated cemented carbide grade; material suitability should be checked against the product matrix for the CCGT09T302-MN2 WNN10 to ensure the correct application envelope. What clamping considerations apply to the Rhombus 80° shape? The Rhombus 80° geometry allows flexible clamping options in standard toolholders but requires correct seat and clamp pressure to achieve the specified tolerance class G and stable cutting conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
CCGT09T302-MN2 WSM01 MN2 Wendeplatten - Walter Tools
The combination of a WSM01 coated carbide grade, robust MN2 chip control and a rhombic 80° geometry delivers stable machining in demanding alloys; benefit from reliable edge life and consistent chip formation. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. CCGT09T302-MN2 WSM01 indexable insert — Tiger‑tec Silver, for rostfreier Stahl and superalloys — Walter Tools CCGT09T302-MN2 WSM01 is an indexable turning and boring insert designed for heavy-duty machining of tough alloys and rostfreier Stahl, offering a coated carbide grade for secure chip control and prolonged edge stability Tiger‑tec Silver series performance WSM01 coated carbide grade Rhombic 80° insert geometry 7° clearance angle, 0.2 mm corner radius High-performance grade for demanding materials The WSM01 grade, part of the Tiger‑tec Silver family, is a coated carbide solution optimised for work on rostfreier Stahl and heat-resistant superalloys. Its chemical and microstructural design supports stable chip formation and reduces the tendency for built-up edge under high thermal load. For production environments where reproducible edge life is crucial, this insert provides a predictable cutting behaviour that lowers downtime and increases process reliability. The specification targets materials classified as M (rostfreie Stähle) and S (superalloys, titanium), ensuring compatibility with a broad range of high-strength alloys commonly encountered in aerospace, energy and medical component manufacturing. Geometry that balances penetration and edge strength The rhombic 80° shape combined with a 7° clearance angle and a 0.2 mm corner radius creates a versatile cutting geometry suitable for both profiling and light ramping operations. The MN2 chipbreaker promotes manageable chip segments, improving evacuation in semi-finishing and finishing passes while maintaining a protected cutting edge during interrupted cuts. These geometric choices translate into lower cutting forces and reduced vibration, which helps to preserve surface integrity and dimensional stability on the workpiece. For operations that require consistent surface quality, the geometry supports smoother transitions and reduces the need for secondary finishing. Integration into machining processes and economic benefits As an indexable solution, the insert simplifies tool management: rapid indexing replaces worn cutting edges without the need for regrinding, reducing machine idle time and tool change complexity. The coated carbide of the WSM01 grade provides improved wear resistance and temperature tolerance, contributing to longer tool life and fewer tool interventions. In batch production or mixed-material processing, this results in a favourable cost-to-performance ratio, where tool longevity and consistent component quality impact overall process efficiency. For shops aiming to raise throughput while maintaining surface finish and tolerances, this insert offers a pragmatic balance between performance and operational economy. Contact Metav Werkzeuge for tailored selection guidance on Walter Tools Tiger‑tec Silver inserts and secure the optimal WSM01 configuration for rostfreier Stahl and superalloy machining Technical Data Article number: CCGT09T302-MN2-WSM01-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCGT09T302-MN2 WSM01 Walter Tools Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Clearance angle: 7° Corner radius: 0.2 mm Insert size: 09 Thickness designation: T3 Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WSM01 (coated carbide) Chipbreaker: MN2 Shape: Rhombus 80° Designation without grade: CCGT09T302-MN2 Applicable materials: rostfreier Stahl (M), superalloys / titanium (S) FAQ What materials is this insert suitable for? The CCGT09T302-MN2 WSM01 insert from Walter Tools is formulated for machining rostfreier Stahl and heat-resistant superalloys, matching ISO groups M and S for secure chip control and thermal stability. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker promotes segmented chips and consistent evacuation, improving process reliability during semi-finish and finish turning when using the WSM01 grade. Can the rhombic 80° geometry be used for profiling? Yes; the rhombic 80° shape provides a favourable cutting angle for profiling and light ramping while maintaining edge strength and dimensional control. What benefits does the Tiger‑tec Silver series bring? Tiger‑tec Silver coating enhances wear resistance and heat tolerance, extending edge life and supporting continuous performance in demanding alloy machining. Is this insert suitable for interrupted cuts? The geometry and coated carbide grade offer robust edge stability for many interrupted cut scenarios, reducing chipping risk and maintaining surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for identification of the original product. There is no affiliation between Metav Werkzeuge and the named brands. The offered item is an original, factory-new product of the manufacturer.
CCGT09T302M-FP2 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the WEP10C cermet grade and the FP2 chipbreaker for reliable surface quality and consistent chip control; the rhombic 80° geometry and 0.2 mm corner radius support precise finishing and tight tolerances. Order the insert directly via Metav Werkzeuge or request application advice from the consultants. CCGT09T302M-FP2 WEP10C – Rhombic 80° cermet turning/boring insert, FP2 chipbreaker | Walter Tools A CCGT09T302M-FP2 WEP10C cermet indexable insert engineered for finishing-oriented turning and light boring tasks in general machining operations Walter Cermet grade WEP10C for fine finishing Rhombic 80° geometry for versatile turning 0.2 mm corner radius for tight tolerances FP2 chipbreaker for consistent chip control Consistent surface quality through cermet chemistry and chip control The combination of the WEP10C cermet grade and the FP2 chipbreaker is designed to deliver a consistently fine surface finish while maintaining stable cutting performance. Cermet materials blend ceramic and metallic components to offer superior hardness at elevated temperatures, which reduces flank wear during finishing passes. The FP2 chipbreaker shapes chips for controlled evacuation, lowering the risk of built-up edge and promoting repeatable part quality. This configuration therefore supports tighter dimensional control and reduces the need for secondary finishing operations. Geometry tailored for versatility and accuracy The rhombic 80° plate form and a clearance angle of 7° provide a balanced compromise between strength and access to the cutting zone, making the insert suitable for a range of radial and axial engagements. With a 0.2 mm corner radius and T3 plate thickness, the insert offers accurate corner definition for fine-detail work while retaining sufficient edge robustness for light roughing. These geometric choices help maintain stable cutting forces and predictable tool behaviour, which is advantageous in high-mix production where changeovers and consistent part output are required. Process reliability and application guidance The series designation Walter Cermet signals a focus on finishing performance and tool life stability. The insert’s execution and tolerance class (G) support repeatable indexing and mounting accuracy. Material compatibility is not universally implied; the grade’s suitability for specific alloys must be verified via the product matrix supplied by the manufacturer. For process optimisation, match cutting data to the workpiece material and machining strategy to exploit the insert’s strength: smooth chip control, stable edge retention and dependable surface finish. Contact Metav Werkzeuge to discuss the CCGT09T302M-FP2 WEP10C insert from Walter Tools and obtain tailored cutting parameters, sample recommendations or application-specific data via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCGT09T302M-FP2-WEP10C-WALTER Name: CCGT09T302M-FP2 WEP10C Product type: Turning / boring indexable insert Series: Walter Cermet Grade: WEP10C Manufacturer: Walter Tools Core data Clearance angle: 7° Corner radius: 0.2 mm Plate thickness: T3 Plate size: 09 Tolerance class: G Special features Chipbreaker: FP2 Plate form: Rhombus 80° Execution: T Base designation: CCGT09T302M-FP2 Sortenhinweis: Werkstoffeignung anhand der konkreten Produktmatrix prüfen FAQ What materials is this insert suitable for? Material suitability must be checked in the product matrix; the CCGT09T302M-FP2 WEP10C insert is a cermet grade designed primarily for finishing applications and requires matching to the workpiece material via the manufacturer’s recommendations. How does the FP2 chipbreaker affect machining? The FP2 chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of built-up edge and improving surface finish when the CCGT09T302M-FP2 WEP10C insert is used in finishing passes. What does the 0.2 mm corner radius mean for tolerance and finish? A 0.2 mm corner radius provides precise corner definition and a fine surface finish while maintaining a small level of edge strength, making the insert suitable for tight tolerance turning operations. Is the rhombic 80° geometry suitable for shoulder cuts? The rhombic 80° geometry offers good access and cutting-edge strength for a variety of turning tasks, including light shoulder cuts; machining parameters should be adjusted according to the specific operation and material. How does the tolerance class G impact mounting and repeatability? Tolerance class G indicates consistent manufacturing tolerances for the insert, supporting accurate indexing and repeatable tool positioning when the insert is mounted and indexed. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned solely for clarification purposes. There is no affiliation or connection between our company and the mentioned brands. The offered article is an original, factory-new product of the respective manufacturer. Walter Tools is stated where appropriate.
CCGT09T302ML-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Take advantage of the combination of Walter Cermet cutting performance, precise geometry and reliable chip control to improve finishing operations and reduce rework. The robust FX4 chipbreaker and a 0.2 mm corner radius deliver consistent results across batch production. Order directly via Metav Werkzeuge or contact our consultants for matrix-specific advice. CCGT09T302ML-FX4 WEP01C – Walter Tools turning insert, cermet grade with FX4 chipbreaker The CCGT09T302ML-FX4 WEP01C is a rhombic 80° turning insert in Walter Cermet quality, engineered for precision finishing and controlled chip formation in demanding turning tasks. Cermet grade WEP01C for fine finishing FX4 chipbreaker for stable chip control Rhombic 80° shape, 0.2 mm corner radius 7° clearance angle, tolerance class G Increased surface quality with cermet cutting material The cermet composition of this insert emphasises a high-quality surface finish and dimensional stability in finishing cuts. Combined with the FX4 chipbreaker, the design reduces build-up and promotes predictable chip flow, which contributes directly to shorter downstream processes and less manual rework. For production environments that prioritise consistent part appearance and tight tolerances, this combination supports measurable productivity gains while maintaining machining accuracy. Application guidance and material compatibility The insert belongs to the Walter Cermet series and is intended for precision turning tasks; however, suitability should be verified against the product matrix for specific workpiece materials. The grade provides good resistance to abrasive wear and maintains a sharp cutting edge for fine feeds, making it particularly effective in finishing operations. Where materials or operational parameters are uncertain, the product matrix offers the necessary guidance to match cutting data to the correct application. Geometry that balances versatility and tool life The 80° rhombic form and 0.2 mm corner radius support flexible use in light turning and profile finishing, allowing for narrow fillet radii without compromising edge strength. A 7° clearance angle reduces flank rubbing and heat transfer into the tool, while the T3 plate thickness and tolerance class G ensure stable seating and repeatable positioning in compatible toolholders. These geometric choices extend usable life and keep process variance low across changeovers. Integration into production and economic benefits Designed for straightforward mounting and consistent interchangeability, the insert promotes efficient changeover routines and reduced machine downtime. The FX4 chipbreaker optimises swarf control for reliable chip evacuation in continuous processes, supporting higher component throughput. Where lifecycle costs are considered, the robust edge behaviour and predictable wear pattern translate into fewer unexpected tool changes and improved overall process economy. Contact Metav Werkzeuge to discuss how the Walter Cermet WEP01C grade can enhance finishing performance in a specific production setup and to obtain the appropriate product matrix for material matching. Technical data SKU: CCGT09T302ML-FX4-WEP01C-WALTER Article designation: CCGT09T302ML-FX4 WEP01C Product type: turning insert (indexable) Brand: Walter Tools Grade: WEP01C Series: Walter Cermet Shape: Rhombus 80° Facts Corner radius: 0.2 mm Clearance angle: 7° Plate size: 09 Plate thickness: T3 Tolerance class: G Special features Chipbreaker: FX4 Cutting material: cermet (Walter Cermet) Material specification: catalogue-dependent Sorteneinsatz: check product matrix for material suitability Designation: CCGT09T302ML-FX4 FAQ What materials is this insert suitable for? The CCGT09T302ML-FX4 WEP01C insert is part of the Walter Cermet series; material suitability must be checked in the product matrix to ensure the WEP01C grade matches the intended workpiece material. How does the FX4 chipbreaker affect machining? The FX4 chipbreaker on the CCGT09T302ML-FX4 WEP01C improves chip control and reduces build-up, which helps maintain consistent surface quality and lowers the risk of interrupted cuts. Can this insert be used for finishing operations? Yes, the WEP01C cermet grade together with a 0.2 mm corner radius makes the insert well suited to finishing applications where a high-quality surface and dimensional stability are required. What does tolerance class G mean for mounting? Tolerance class G ensures consistent fit and repeatable positioning in compatible toolholders, supporting quick changes and reliable interchangeability when using the CCGT09T302ML-FX4 WEP01C. Which toolholders are compatible with this rhombic 80° insert? Toolholders designed for rhombic 80° CCGT-style inserts are compatible; confirm holder specifications against the insert designation CCGT09T302ML-FX4 WEP01C to ensure correct seating and clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names is for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
CCGT09T302MR-FX4 WEP01C WEP01C Wendeplatten - Walter Tools
Combining the Walter Cermet grade WEP01C with the FX4 chipbreaker and a precise 0.2 mm corner radius delivers consistent edge life and fine surface quality; order the CCGT09T302MR-FX4 WEP01C directly via Metav Werkzeuge or consult our specialists for application advice. CCGT09T302MR-FX4 WEP01C indexable turning insert — Walter Tools, FX4 chipbreaker, 0.2 mm radius The CCGT09T302MR-FX4 WEP01C is an indexable turning insert intended for precision finishing and repeatable performance in general turning applications Walter Cermet grade WEP01C for durable edges FX4 chipbreaker for controlled chip formation Rhombus 80° shape for versatile turning 0.2 mm corner radius for fine surface finish Consistent edge life for productive finishing The Walter Cermet grade WEP01C combines cermet material properties with a geometry optimised for finishing, resulting in improved flank wear resistance and consistent part quality. The FX4 chipbreaker ensures stable chip control at finishing feeds, reducing the risk of built-up edge and rework. These characteristics translate into fewer insert changes and more predictable machining cycles, which supports higher throughput and lower process variability. Precise geometry that creates predictable results A Rhombus 80° form with a 0.2 mm corner radius and 7° clearance gives a balance between edge strength and surface definition. The nominal T3 thickness and the insert’s tolerance class G maintain positional accuracy in the toolholder, delivering repeatable contact conditions and consistent cutting engagement. This predictable geometry helps to achieve uniform surface finish and dimensional stability, especially in operations where fine tolerances are required. Process guidance for reliable integration The FX4 chipbreaker and cermet grade are particularly suited to finishing strategies where controlled chip flow and low cutting forces are priorities. The insert’s catalogue-dependent material specification allows selection against the workpiece and cutting data matrix; where higher thermal resistance and edge stability are needed, the Walter Cermet series typically performs well. Tooling planners benefit from the insert’s standardised form factor for straightforward integration into existing tool setups, promoting process security and shorter setup times. For reliable finishing with Walter Tools’ Cermet grade, contact Metav Werkzeuge for ordering or technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CCGT09T302MR-FX4-WEP01C-WALTER Designation: CCGT09T302MR-FX4 WEP01C Product type: Indexable turning insert Brand: Walter Tools Facts Tolerance class: G Clearance angle: 7° Corner radius: 0.2 mm Plate size: 09 Plate thickness: T3 Shape: Rhombus 80° Special features Grade: WEP01C (cermet) Chipbreaker: FX4 Series: Walter Cermet Execution: T Material: Katalogabhängig FAQ What machining tasks is this insert best suited for? The CCGT09T302MR-FX4 WEP01C insert from Walter Tools is optimised for finishing passes and operations that demand controlled chip formation and fine surface quality. How does the FX4 chipbreaker affect performance? The FX4 chipbreaker promotes consistent chip control and reduced built-up edge, improving surface finish and contributing to longer effective edge life for the Walter Cermet grade. Is the 0.2 mm corner radius suitable for tight-tolerance components? Yes, the 0.2 mm corner radius supports fine surface generation and dimensional stability, making it appropriate for tight-tolerance finishing applications with the given insert geometry. Can the insert be used in standard toolholders? The Rhombus 80° form and T3 thickness adhere to common indexable insert standards, allowing integration into compatible holders while maintaining positional accuracy. Walter Tools: Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCGT09T304-FL2 WMP30G WMP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP30G grade optimised for rostfreien Stahl, and the compact 0.4 mm nose radius with a 7° clearance for stable, productive turning operations; order the insert directly via Metav Werkzeuge or consult the team for application-specific data. CCGT09T304-FL2 WMP30G turning insert – Tiger·tec Gold for rostfreien Stahl | Walter Tools The CCGT09T304-FL2 WMP30G is a rhombic 80° turning insert designed for secure chip control and robust performance when machining rostfreien Stahl in medium to demanding conditions. Tiger·tec Gold coating for long tool life WMP30G grade for rostfreien Stahl Rhombus 80° form with 7° clearance FL2 chipbreaker and 0.4 mm nose radius Productive machining of rostfreien Stahl with controlled chip formation The WMP30G grade, incorporated in the CCGT09T304-FL2 WMP30G, is a coated carbide designed specifically for rostfreie Stähle, where work hardening and thermal concentration are common. Combined with the Tiger·tec Gold series, the insert promotes secure chip formation and a stable cutting edge under medium to robust cutting conditions. This means fewer interruptions for rework and consistently predictable tool behaviour when turning challenging stainless alloys, supporting a smoother production flow. Improved surface finish and repeatability through geometry and chip control The insert’s Rhombus 80° form, modest 0.4 mm nose radius and 7° clearance provide a balanced approach between strength and surface quality. The FL2 chipbreaker is tuned to break and evacuate chips effectively during continuous turning, reducing the risk of built-up edge and improving repeatable surface results. As a consequence, machining operations benefit from longer intervals between tool changes and a more consistent finished part quality. Process reliability and integration into modern turning systems Designed for stable performance, this turning insert fits standard indexable toolholders that accept the CCGT family. The Tiger·tec Gold series emphasises wear resistance and stable cutting edges, which translates into predictable tool life and reduced machining variance. For production environments seeking to increase uptime and process security, this insert offers a technically clear and economical option that is directly applicable in serial and jobbing operations. Contact Metav Werkzeuge for cutting data and availability of Walter Tools Tiger·tec Gold CCGT09T304-FL2 WMP30G; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number / SKU: CCGT09T304-FL2-WMP30G-WALTER Designation: CCGT09T304-FL2 WMP30G Product type: turning insert (indexable) Brand: Walter Tools Facts Clearance angle: 7° Nose radius: 0.4 mm Insert size: 09 Thickness: T3 Insert form: Rhombus 80° Special features Coating / series: Tiger·tec Gold Grade: WMP30G Chipbreaker: FL2 Suitable for: rostfreien Stahl FAQ Which materials is this insert suited for? The CCGT09T304-FL2 WMP30G is optimised for machining rostfreien Stahl and is intended for medium to robust cutting conditions common with stainless alloys. What are the key geometry values to note? This turning insert features a 7° clearance, a 0.4 mm nose radius and the Rhombus 80° form, providing a balance between edge strength and surface finish. Which chipbreaker is fitted and what does it deliver? The FL2 chipbreaker on the CCGT09T304-FL2 WMP30G improves chip control for continuous turning, supporting safe evacuation and reduced built-up edge. How does Tiger·tec Gold benefit performance? Tiger·tec Gold is Walter Tools’ coating technology integrated in this grade to enhance wear resistance and maintain a stable cutting edge during the machining of rostfreie Stähle. Is the insert compatible with standard CCGT toolholders? Yes, the geometry and ISO-style designation of the insert make it compatible with common indexable turning holders that accept CCGT-format inserts. Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are used for explanation only and do not indicate any affiliation between our company and the named manufacturers.
CCGT09T304-FL2 WPP20G FL2 Wendeplatten - Walter Tools
Take advantage of a high-performance cutting solution that combines Tiger·tec Gold coating and the wear-resistant WPP20G grade for consistent results in steel machining; the insert’s FL2 chipbreaker and 0.4 mm corner radius deliver controlled chip formation and reliable edge strength. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCGT09T304-FL2 WPP20G — Indexable turning insert with Tiger·tec Gold coating and FL2 chipbreaker (Walter Tools) The CCGT09T304-FL2 WPP20G is a coated indexable turning insert engineered for steel machining, providing robust chip control and long tool life in general turning operations. Tiger·tec Gold coating for extended life Optimised for steel (P) machining Rhombic 80° insert geometry 7° clearance for stable cutting Durable coating that increases productivity The combination of Tiger·tec Gold coating and a coated carbide substrate gives this insert outstanding wear resistance and thermal stability during high-volume turning. This results in fewer indexings and longer uninterrupted production cycles, which improves overall process economy. The WPP20G grade is tuned for the typical heat and chip behaviour encountered when machining steels, offering a balance between wear resistance and toughness. For workshops aiming to reduce tooling changes and increase throughput, this coated grade reduces downtime and supports predictable tool-life planning. Controlled chip formation and consistent surface finish A dedicated FL2 chipbreaker forms short, manageable chips across a wide range of cutting conditions, reducing the risk of chip entanglement and machine interruptions. The Rhombic 80° shape paired with a 0.4 mm corner radius provides an effective compromise between edge strength and surface quality, enabling stable feeds and improved part finish. The insert’s 7° clearance helps maintain cutting stability and minimise rubbing at the flank, which contributes directly to repeatable dimensional quality on turned components. Geometry and tolerance for reliable turning results With a tolerance class G and a compact 09 size, the insert suits medium to fine turning tasks where repeatability matters. The T3 plate thickness supports sufficient rigidity in typical toolholder systems while the insert’s form promotes efficient clamping and seat contact. Designed primarily for steel (P) applications, the geometry reduces vibration sensitivity and helps maintain cutting-edge integrity under continuous operation, offering a dependable solution for batch production and jobbing environments alike. For specific machining scenarios or to source the matching toolholders and toolpacks for Walter Tools inserts, contact Metav Werkzeuge for expert guidance and rapid delivery. Technical data Article number: CCGT09T304-FL2-WPP20G-WALTER Label: Drehwendeschneidplatte CCGT09T304-FL2 WPP20G Walter Tools Manufacturer: Walter Tools Product type: Indexable turning insert Series: Tiger·tec Gold Core data Free angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 80° Size: 09 Thickness: T3 Tolerance class: G Special features Coated carbide (beschichtetes Hartmetall) Grade: WPP20G Chipbreaker: FL2 Application group: Steel (P) according to ISO 513 Optimised for balanced wear resistance and toughness FAQ What materials is this insert suitable for? The CCGT09T304-FL2 WPP20G insert is designed for steel applications (ISO group P); the WPP20G grade and Tiger·tec Gold coating are optimised for the heat and chip behaviour typical when turning unalloyed and alloyed steels. How does the FL2 chipbreaker affect machining? The FL2 chipbreaker on this Walter Tools indexable turning insert promotes short, controllable chips, which reduces swarf issues and helps maintain consistent surface finish during continuous turning operations. What does the tolerance class G mean for everyday use? Tolerance class G indicates narrow manufacturing tolerances for the insert, providing reliable seating and repeatable positioning in the toolholder, which supports dimensional consistency across multiple indexings. Is the 0.4 mm corner radius suitable for finishing passes? A 0.4 mm corner radius provides a good balance between edge strength and surface quality; it is suitable for medium finishing and general turning tasks where a compromise between tool life and finish is required. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the brands named. The offered article is original, factory-new goods from the manufacturer Walter Tools.
CCGT09T304-FL2 WPP30G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WPP30G grade delivers sustained wear resistance and reliable chip control for steel turning applications; enjoy consistent component quality and longer tool life. Order the CCGT09T304-FL2 WPP30G turning insert via Metav Werkzeuge or consult the product advisors for material-specific recommendations. CCGT09T304-FL2 WPP30G rhombic 80° turning insert with Tiger‑tec Gold by Walter Tools CCGT09T304-FL2 WPP30G is a coated carbide turning insert designed for efficient machining of steel in general turning applications Tiger‑tec Gold coating for enhanced wear resistance WPP30G grade optimised for steel machining Rhombic 80° geometry with 0.4 mm corner radius FL2 chipbreaker for controlled chip formation Predictable performance through advanced coating and grade The Tiger‑tec Gold technology in this insert provides a hard, wear‑resistant surface that maintains a stable cutting edge under typical steel cutting temperatures. Combined with the WPP30G composition, the result is a balance between wear resistance and toughness that reduces flank wear and chipping. For manufacturers focusing on process stability, this means fewer tool changes and more reliable cycle times without compromising surface finish. Geometry and chip control that stabilise machining The rhombic 80° platform with a 0.4 mm corner radius and the FL2 chipbreaker promote consistent chip formation and reduced cutting forces. The 80° approach angle supports positive cutting engagement for general turning, while the chipbreaker design directs swarf away from the cutting zone to prevent re‑cutting. In practice, the geometry simplifies set‑up and improves machining predictability on medium and roughing passes. Clear application guidance and compatibility Classified for material group P, the insert is intended primarily for machining steel such as unalloyed and alloyed grades. The coated carbide substrate provides the necessary toughness for varied steel workpieces and typical ISO P applications. The item’s designation and dimensions make it compatible with standard toolholders that accept rhombic 80° CCGT‑style inserts, offering straightforward integration into existing turning toolsets. Process benefits that support productivity and economy Using a coated grade tuned for steel machining reduces unscheduled downtime and contributes to a measurable decrease in tooling costs per component. The hard coating and controlled edge wear prolong usable life, while consistent chip evacuation supports safer, higher‑quality production runs. For operations seeking process security and repeatable outcomes, the insert offers an efficient compromise between performance and cost‑effectiveness. Contact Metav Werkzeuge to arrange application advice for Walter Tools Tiger‑tec Gold turning inserts and secure optimal results in steel machining Technical data SKU: CCGT09T304-FL2-WPP30G-WALTER ISO designation: CCGT09T304-FL2 WPP30G Series: Tiger‑tec Gold Grade: WPP30G Manufacturer: Walter Tools Product type: Turning insert (coated carbide) Facts Relief angle: 7° Corner radius: 0.4 mm Insert shape: Rhombic 80° Insert size: 09 Thickness: T3 Chipbreaker: FL2 Tolerance class: G Special features Coating technology: Tiger‑tec Gold Substrate: coated carbide Material group: P (steel) Application: general steel turning Execution: T FAQ What materials is this insert suitable for? The CCGT09T304-FL2 WPP30G insert is designed for machining materials in the P group, primarily steel, and the WPP30G grade is optimised for typical steel cutting conditions. How does the Tiger‑tec Gold coating affect tool life? The Tiger‑tec Gold coating on this Walter Tools insert increases wear resistance and helps maintain edge integrity, which typically extends tool life under standard steel turning cycles. Which chipbreaker is integrated and what benefit does it offer? The insert features an FL2 chipbreaker, which promotes consistent chip formation and evacuation, reducing the risk of built‑up edge and improving surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com