Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT 060204 AH6235 Wendeplatten - Tungaloy
Combining PVD-coated AH6235 carbide for improved notch resistance, a precise 0.4 mm corner radius and ISO compatibility, this insert supports consistent productivity and process stability in turning operations. Order the CCMT 060204 AH6235 insert via Metav Werkzeuge or consult our application specialists for tailored recommendations. CCMT 060204 AH6235 ISO turning insert — PVD-coated carbide for stainless steels (Tungaloy) CCMT 060204 AH6235 is an ISO-standard rhombic turning insert designed for external and internal turning, optimised for interrupted cuts and high notch-risk applications. PVD-coated AH6235 for stainless steels 0.4 mm corner radius for accurate profiles Rhombic ISO insert with 80° cutting edge One-sided chipbreaker, cylindrical hole + countersink Precision and consistent cutting performance for production The CCMT 060204 AH6235 insert is engineered to deliver repeatable results in serial and batch production. With a PVD-coated surface and a specially formulated AH6235 grade, the insert provides enhanced resistance to thermal softening and notch wear; this improves tool life where workpiece material and intermittent cutting create higher demands. The combination of a defined 0.4 mm corner radius and an 80° cutting-edge geometry enables controlled chip formation and predictable cutting forces, which supports stable machining and fewer process interruptions. Compatibility with ISO-standard holders ensures interchangeability and straightforward stocking for production lines. Flexible application and secure clamping for reliable usage Designed as an ISO turning plate, the insert features a rhombic form, a central cylindrical hole with a one-sided countersink (40°–60°) and a one-sided chipbreaker, making it suitable for a wide range of turning set-ups. The geometry and hole style permit secure clamping in standard ISO tool holders and boring bars; as a result, set-up repeatability is improved and index changes remain quick. For applications that require a specific holder or clamping kit, matching components and spare screws can be supplied to maintain process uptime and reduce assembly time. Material suitability and practical machining benefits The PVD-coated cemented carbide substrate and the tougher AH6235 grade are targeted at machining stainless steels as well as interrupted cuts where chipping risk is elevated. The coating reduces adhesion and built-up edge while the substrate maintains cutting-edge stability under varying temperatures. These properties translate into fewer in-process failures and more consistent dimensional quality on the workpiece. Where surface finish and batch consistency matter, the insert's design promotes controlled chip evacuation and reduced vibration, contributing to better overall productivity and lower scrap rates. For application-specific recommendations, cutting data or to order the CCMT 060204 AH6235 Tungaloy insert together with suitable holders and spare parts, contact Metav Werkzeuge — our specialists will advise on optimal set-up and supply. Technical Data Article number: 6890157 Manufacturer SKU: TUN6890157 SKU: 6890157-Tungaloy Model series: ISO-Drehwendeschneidplatten Item name: CCMT060204 AH6235 Tungaloy-Wendeplatte Facts Insert designation: CCMT060204 Size designation: 06 Corner radius: 0.4 mm Clearance angle: 7° Cutting edge angle: 80° Plate thickness: 2.38 mm Special features Material: cemented carbide Coating: PVD (AH6235) Chipbreaker: one-sided Hole style: cylindrical hole with one-sided countersink (40°–60°) Application: turning; suitable for stainless steels and interrupted cuts Shape: rhombic FAQ What materials is this insert best suited for? The CCMT 060204 AH6235 insert is specified for stainless steels and is particularly effective in interrupted cuts and applications with increased notch risk due to its tougher AH6235 grade and PVD-coated surface. Which holder types are compatible with this ISO insert? Compatibility is determined by ISO form, clearance angle, tolerance class, clamp style, size and thickness; the CCMT 060204 designation fits standard ISO turning holders and compatible boring bars when matched by those parameters. How does the AH6235 grade affect tool life? The AH6235 grade offers enhanced resistance to notch wear and thermal softening; when used on appropriate stainless steel applications, the PVD-coated grade extends edge life and reduces the frequency of index changes. Is special clamping hardware required because of the hole and countersink? The insert’s cylindrical hole with a one-sided countersink (40°–60°) enables standard screw clamping systems; ensure the holder’s seat and screw match the ISO geometry for secure fixation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AH725 Wendeplatten - Tungaloy
Take advantage of the AH725 PVD‑coated carbide grade for fracture resistance across steels and stainless steels and the ISO CCMT060204 format for straightforward compatibility with standard holders, ensuring stable, productive turning operations. Order the insert directly via Metav Werkzeuge or consult our technical team for optimal selection and matching clamping components. CCMT060204 AH725 Tungaloy indexable insert — PVD‑coated carbide, 0.4 mm radius The CCMT060204 AH725 is an ISO‑standard rhombic turning indexable insert designed for external and internal turning, featuring a single‑sided chipbreaker and a cylindrical hole with one‑side countersink for secure clamping. ISO rhombic turning insert CCMT format PVD-coated carbide grade AH725 0.4 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Stable cutting performance for mixed steels The AH725 grade delivers consistent cutting behaviour across a wide range of steels and stainless steels, offering a balanced combination of wear resistance and edge stability. The PVD coating reduces friction and protects the substrate under interrupted cuts, while the carbide substrate provides the toughness required for small tools and demanding process conditions. This results in fewer insert changes and a more predictable tool life, supporting uninterrupted production runs and improved process security. Secure clamping and ISO compatibility for fast changeovers Thanks to the ISO CCMT060204 designation and the central cylindrical hole with one‑side countersink (40°–60°), the insert installs reliably in matched holders and boring bars. The standardised geometry simplifies inventory and replacement procedures: a compatible outer holder, shim/clamp set and replacement screws form a complete system. The 0.4 mm corner radius and 7° clearance angle contribute to stable contact and repeatable seating, reducing setup time and the risk of misalignment. Geometry and chip control explained The rhombic form with an 80° included angle provides a versatile approach angle for both roughing and finishing passes. The single‑sided chipbreaker is tuned for controlled chip formation on a variety of steels, improving evacuation and reducing the chance of built‑up edge. For operators unfamiliar with insert geometry: the chipbreaker influences where the chip curls and breaks, so choosing this single‑sided design helps maintain surface quality and protects the cutting edge under variable feed rates. Economy and recommended use cases Using this PVD‑coated carbide insert in mixed‑material batches pays off through extended edge life and reduced downtime. The grade is particularly advantageous for shops facing frequent material changes or operating smaller tooling setups where process reliability is paramount. Typical applications include external finishing, light to medium roughing and internal turning where dimensional stability and surface integrity are required. For tailored advice on integrating the Tungaloy AH725 inserts into production, contact Metav Werkzeuge for availability and holder recommendations — our consultants will support the selection of the right grade and clamping solution Technical Data Article number: 6856696 Manufacturer SKU: TUN6856696 SKU: 6856696-Tungaloy Model series: ISO turning indexable inserts Material: carbide Grade/coating: AH725, PVD-coated Designation: CCMT060204 Insert form: rhombic Thickness: 2.38 mm Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Facts Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Plate size: 06 Platen thickness: 2.38 mm Countersink angle range: 40°–60° Special features Single-sided chipbreaker Suitable for external and internal turning Universal, fracture-resistant grade for steel and stainless steels Compatible with ISO holders and boring bars PVD coating for reduced friction and improved wear resistance Recommended for mixed materials and smaller tooling System components: insert, outer holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suited for? The CCMT060204 AH725 insert is specified for a broad spectrum of steels and stainless steels, offering fracture resistance and stable cutting across mixed workloads. How does the AH725 grade improve process security? AH725’s PVD coating and carbide substrate combine to reduce friction and resist edge damage, giving the insert predictable wear behaviour and elevated process reliability in turning applications. Which holders fit the CCMT060204 format? ISO‑standard CCMT holders and compatible boring bars that accept size 06 rhombic inserts with a centrally located cylindrical hole and countersink will accommodate this insert. What cutting tasks suit the 0.4 mm corner radius? A 0.4 mm corner radius is ideal for fine finishing and light to medium turning passes where surface quality and dimensional control are priorities. Is this insert suitable for interrupted cuts or unstable setups? Yes; the fracture‑resistant AH725 grade and PVD coating improve performance on interrupted cuts, and the insert’s geometry supports stability in less rigid conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH725, ISO interchangeability and secure chip control for reliable, productive turning operations; order the insert directly via Metav Werkzeuge or consult the team for application matching. CCMT 060204 AH725 turning insert – Tungaloy, PVD-coated carbide for turning A CCMT060204 AH725 rhombic insert for external and internal turning, offering a universal, fracture-resistant grade and standardised ISO compatibility. PVD-coated carbide AH725 Universal for steel and stainless steels 80° rhombic geometry, 0.4 mm radius ISO CCMT060204 for easy replacement Consistent cutting performance that raises process reliability The PVD-coated carbide composition and the AH725 grade deliver a balanced combination of wear resistance and toughness, designed for applications with varying workpiece materials. This results in fewer unplanned tool changes and a lower scrap rate, which supports higher overall productivity. The coating reduces flank wear and helps maintain the cutting edge at elevated temperatures, while the substrate toughness prevents premature chipping under interrupted cuts. These characteristics make the insert particularly suitable where process security is a primary requirement and stable chip formation is essential. Geometry and chip control for precise turning results The insert’s 80° rhombic form and 0.4 mm corner radius provide a controlled contact zone that supports repeatable surface finish and dimensional accuracy. A 7° relief angle minimises rubbing and reduces cutting forces, helping to prolong tool life and enabling reliable finishing passes. The one-sided chipbreaker is optimised to produce predictable chips for most turning tasks, aiding swarf evacuation and machine uptime. The ISO designation ensures interchangeability with holders designed for the CCMT060204 format, simplifying tool inventory and set-up for both external and internal turning operations. Practical integration into workshop tool systems Compatibility with toolholders depends on form, relief angle, tolerance class, fastening method, size and thickness; the ISO-based design of this insert streamlines that process. The insert includes a cylindrical hole with a single-side counterbore (40°–60°) for secure clamping and consistent seating in indexable toolholders. A thickness of 2.38 mm and standardised dimensions support predictable clamping torque and repeatable positioning. For production environments handling mixed materials or small tooling setups, the universal grade reduces the need for multiple specialised inventories and supports shorter changeover times, contributing to a more economical machining strategy. Contact Metav Werkzeuge today to specify the Tungaloy AH725 insert for improved process security and chip control — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6856761 SKU: 6856761-Tungaloy Manufacturer SKU: TUN6856761 Model series: ISO-Drehwendeschneidplatten ISO designation: CCMT060204 Facts Insert size: 06 Thickness: 2.38 mm Included angle: 80° Relief angle: 7° Corner radius: 0.4 mm Special features Material: Carbide Coating / grade: AH725 (PVD-coated) Chipbreaker: One-sided Hole: With hole — cylindrical hole + single-side counterbore (40°–60°) Shape: Rhombic Application: Turning (external and internal) Compatibility: ISO CCMT060204 holders FAQ What materials is this insert suitable for? This insert in AH725 grade is intended for machining steel and stainless steels and is formulated to provide stable chip formation across changing workpiece materials. How does the CCMT geometry affect turning performance? The CCMT060204 geometry with an 80° rhombic shape and 0.4 mm corner radius supports repeatable surface finish and dimensional control while the 7° relief reduces cutting forces. Is the insert easy to replace in standard holders? The ISO CCMT060204 designation ensures interchangeability with matching ISO toolholders; the cylindrical hole with a single-side counterbore provides secure seating and consistent clamping. Which feature improves process security most for mixed-material runs? The PVD coating combined with the AH725 substrate toughness enhances wear resistance and fracture control, delivering the process security required when workpiece materials vary. Can this insert be used for both roughing and finishing? Yes; the insert’s universal grade and geometry allow it to be applied across a range of turning operations, from light finishing to more demanding cuts when process reliability is prioritised. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AH725 Wendeplatten - Tungaloy
Benefit from a PVD-coated AH725 grade and a robust one-sided chipbreaker that combine process reliability and versatile material performance for efficient turning operations; order the CCMT060204 AH725 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application advice. CCMT060204 AH725 CCMT turning insert by Tungaloy — PVD-coated carbide, one-sided chipbreaker CCMT060204 AH725 is a rhombic ISO turning insert designed for general-purpose external and internal turning where process safety and chip control are priorities. PVD-coated carbide AH725 grade Universal for Stahl and rostfreier Stahl Rhombic 06 form with 80° lead angle 0.4 mm nose radius and 7° relief Consistent performance across mixed batches The PVD-coated AH725 carbide offers a balance of wear resistance and notch toughness that is suited to variable production runs. With a one-sided chipbreaker and a modest 0.4 mm nose radius, the insert stabilises chip formation and reduces the risk of edge chipping when machining different alloys. For shops facing changing components, this combination reduces tool changes and helps maintain cycle-time consistency. The grade is engineered for turning operations where repeatable surface quality and reliable cutting-edge behaviour are required. Designed for secured seating and ISO compatibility Compatibility with holders is determined by form, relief angle, tolerance class, fastening method, size and thickness; the rhombic 06 format and 80° approach angle ensure broad fitment with common ISO turning toolholders. The insert features a cylindrical hole with a one-sided countersink (40°–60°) which supports stable clamping and repeatable positioning. Specifying a matching seat and torque for screws results in consistent clamping force and reduces the likelihood of vibration-related wear, translating into longer effective tool life and more predictable process windows. Practical advantages for productivity and process security The universal nature of the AH725 grade means fewer tool variants are necessary for batches comprising both Stahl and rostfreier Stahl, simplifying inventory and tool management. The PVD-coated carbide layer improves thermal resistance at elevated cutting speeds, while the substrate provides mechanical strength. These characteristics yield a favourable cost-in-use ratio by extending cutting edge life and preserving surface finish quality under typical turning conditions. Handling, inspection and recommended use The insert’s modest thickness and standard ISO geometry make it straightforward to inspect and replace during scheduled tool checks. The rhombic shape and one-sided chipbreaker favour stable chip flow in conventional turning setups; selecting the appropriate holder and matching the insert’s relief and tolerance class is critical for optimal results. For high-process-stability requirements, pairing this insert with a rigid toolpost and proper coolant strategy will further enhance repeatability and surface integrity. For application support or to request the Tungaloy CCMT060204 AH725 insert (SKU TUN6864893) for immediate supply, contact Metav Werkzeuge for tailored advice and ordering assistance Technical data Article number: 6864893 Manufacturer SKU: TUN6864893 SKU: 6864893-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Coating: PVD Grade: AH725 Numerical data Nose radius: 0.4 mm Relief angle: 7° Lead/approach angle: 80° Plate thickness: 2.38 mm Size: 06 Design & special features Rhombic plate form One-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) Intended application: Drehen (turning) Compatibility: ISO turning holders (form, relief, tolerance, fastening, size, thickness) FAQ Is this insert suitable for turning rostfreier Stahl? Yes. The CCMT060204 AH725 insert is specified for machining Stahl and rostfreier Stahl and provides reliable chip control and wear resistance on both material classes. Which holders are compatible with this insert geometry? Compatibility follows ISO norms for rhombic inserts; select an ISO turning holder designed for CCMT 06 format that matches the insert thickness, hole style and clamping method. What does the AH725 grade offer compared with standard grades? The AH725 grade combines a PVD-coated surface with a substrate tuned for resistance to edge breakage, delivering stable performance across varying workpiece materials and small-tool applications. Can the 0.4 mm nose radius deliver good surface finish on finishing passes? A 0.4 mm nose radius balances strength and finish; it is suitable for semi-finish to finish operations where a compromise between surface quality and edge robustness is required. How does the chipbreaker affect machining? The one-sided chipbreaker promotes controlled chip formation in turning tasks, reducing the risk of long, entangling chips and improving machining stability under varying depths of cut. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AH725 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH725 carbide, a 0.4 mm nose radius, and ISO‑compatibility for stable, productive turning. Order the CCMT 060204 AH725 Tungaloy turning insert directly via Metav Werkzeuge or consult our specialists for application support. CCMT 060204 AH725 Tungaloy turning insert — ISO turning insert for external and internal turning, 7° relief A CCMT 060204 AH725 indexable turning insert designed for versatile external and internal turning, offering a fracture‑resistant grade for mixed-material production and increased process security. PVD-coated AH725 carbide for robust cutting Fracture-resistant AH725 for Stahl & rostfreier Stahl Rhombic CCMT form with 7° relief for versatile turning Cylindrical hole with 40°–60° countersink Reliable cutting performance with PVD-coated AH725 The insert delivers consistent performance through its PVD-coated AH725 grade, a carbide combination developed for universal use on Stahl and rostfreier Stahl. The coating enhances wear resistance and supports stable edge form during interrupted cuts, while the fracture‑resistant microstructure reduces the risk of chipping in mixed-production environments. Specified geometry and a 0.4 mm nose radius ensure repeatable contact conditions at the cutting edge, translating into improved surface quality on the workpiece and fewer unplanned tool changes. Designed for secure clamping and ISO system compatibility Compatibility with ISO holders is determined by form, clearance angle, tolerance class, fastening and plate size. The rhombic CCMT form and 7° relief produce a balanced contact interface for both external and internal turning. A cylindrical hole with a 40°–60° countersink provides positive seating and reliable torque transmission in standard clamping sets. The insert’s 2.38 mm thickness and ISO code 060204 fit a wide range of external holders and boring bars, enabling quick integration into existing tool systems and predictable set-up times. Process security and economical machining in mixed batches Selecting the AH725 grade supports process stability when batches contain varying materials or when smaller tools are used under demanding conditions. The combination of coating, carbide substrate and single-sided chipbreaker geometry promotes stable chip control and extended cutting edge life, which in turn reduces downtime and supports consistent cycle times. For applications where repeatability and low scrap rates are priorities, this insert offers a practical balance of productivity and robustness without complex parameter tuning. Contact Metav Werkzeuge today for availability and application advice on the CCMT 060204 AH725 Tungaloy turning insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864982 SKU: 6864982-Tungaloy Manufacturer SKU: TUN6864982 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Inscribed size: 06 ISO designation: 060204 Nose radius: 0.4 mm Thickness: 2.38 mm Plate angle: 80° Relief angle: 7° Hole style: with hole; cylindrical hole + one‑sided countersink (40°–60°) Special features Material: carbide Coating / grade: AH725 (PVD‑coated) Plate form: rhombic Chipbreaker: one‑sided Typical use: turning (external and internal) System build: ISO turning insert, matching external holder or boring bar, shim/clamp set and spare screws FAQ What materials is this insert suitable for? The CCMT 060204 AH725 Tungaloy turning insert is specified for machining Stahl and rostfreier Stahl, offering a universal, fracture‑resistant solution across common steel grades. Which holders are compatible with this insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; the CCMT geometry and ISO code ensure fit with standard CCMT‑compatible external holders and boring bars. How does the AH725 grade affect tool life? The AH725 PVD coating and carbide substrate increase wear resistance and improve edge stability under mixed‑material conditions, resulting in more consistent tool life and fewer unexpected edge failures. What clamping features ensure secure mounting? The insert’s cylindrical hole with a 40°–60° countersink provides positive seating and secure clamping in standard shim and clamp assemblies for vibration‑resistant mounting. Is this insert suitable for finishing and semi‑finishing operations? Yes. The 0.4 mm nose radius and CCMT geometry offer a compromise between strength and surface finish, making the insert appropriate for both finishing and semi‑finishing turns. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8005 for extended wear resistance and the ISO CCMT geometry for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our specialists for application matching. CCMT 060204 AH8005 Tungaloy indexable insert for turning — rhombic CCMT profile, PVD-coated carbide CCMT 060204 AH8005 Tungaloy indexable insert for precision external and internal turning with a single-sided chipbreaker, optimised for heat-resistant alloys and hard materials PVD-coated carbide grade AH8005 ISO CCMT geometry, rhombic 80° included angle Compatible with ISO holders and boring bars Cylindrical hole with one-sided countersink Engineered for consistent wear resistance and longer tool life The PVD-coated carbide composition and grade AH8005 deliver a wear-resistant cutting edge that is tailored for demanding turning of heat-resistant alloys and harder materials. The coating enhances temperature resistance and reduces flank wear, which leads to more predictable tool life and fewer indexings during production. This results in improved process reliability and reduced downtime when the machining setup is stable and clamping is rigid. Simple integration into ISO tooling systems for flexible setup Designed as an ISO-standard insert, the part fits into common external holders and boring bars when the matching parameters—form, 7° clearance, tolerance class, attachment method, size and thickness—are observed. The insert’s mounting features include a cylindrical hole with a single-side countersink (40°–60°), enabling secure clamping and straightforward replacement of consumable inserts within standard clamping systems. A correct holder and shim combination ensures repeatable seating and concentricity. Geometry tuned for predictable chip control and surface finish The rhombic CCMT shape with an 80° included angle and a 0.4 mm corner radius gives a balance between strength and detail in the machined profile. The single-sided chipbreaker is engineered to produce controlled chips under stable cutting conditions, aiding evacuation and helping to maintain a consistent surface quality. In practice, this geometry supports better edge stability and helps to avoid unexpected chatter or poor finishes when feeds and speeds are chosen appropriately. Material and applications: clear indications for best use The substrate is carbide with a PVD finish, optimised for turning operations where abrasion and heat resistance are decisive. The grade is particularly suitable for machining heat-resistant alloys and harder workpiece materials under stable setups; selection of the matching chipbreaker and holder is decisive for achieving the promised life and surface quality. The insert forms part of a system that includes the indexable insert, a compatible external holder or boring bar, an underlay/clamp set and spare screws — combine these components to maintain productive, repeatable results. Contact Metav Werkzeuge for application advice or to request this CCMT insert and ensure the optimal holder and clamping set for the intended turning task — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6749949 SKU: 6749949-Tungaloy Manufacturer SKU: TUN6749949 Dimensions & angles Size designation: 06 (CCMT) Thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Corner radius: 0.4 mm Features & applications ISO designation: CCMT060204 Grade: AH8005 Material: carbide Coating: PVD Shape: rhombic Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Typical use: external and internal turning System components: matching external holder or boring bar; underlay/clamp set; spare screws FAQ What materials is this insert suitable for? The CCMT 060204 AH8005 Tungaloy indexable insert is specified for heat-resistant alloys and harder materials, with the AH8005 grade and PVD coating providing enhanced wear and temperature resistance during turning. How is the insert secured in the holder? Mounting uses a cylindrical hole with a one-sided countersink (40°–60°); correct clamping together with an appropriate shim or clamp set ensures secure seating and repeatable positioning of the insert. Which holders are compatible with this CCMT insert? Compatibility requires holders designed for ISO CCMT geometry; fit is determined by insert form, clearance angle (7°), tolerance class, attachment type, size and thickness — choose holders that meet these ISO parameters. How does the chipbreaker affect machining? The single-sided chipbreaker on this rhombic insert promotes controlled chip formation in stable setups, aiding chip evacuation and contributing to a consistent surface finish and predictable tool life. Is this insert suitable for internal turning (boring)? Yes — the insert is compatible with appropriate boring bars when the bar and clamping system accept CCMT inserts and provide stable support for the chosen application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AH8005 Wendeplatten - Tungaloy
Benefit from the PVD-coated AH8005 grade and ISO CCMT060204 geometry for consistent tool life and process stability; the 0.4 mm corner radius delivers predictable surface finishes. Order the insert directly via Metav Werkzeuge or consult the technical team for holder compatibility and supply options. CCMT060204 AH8005 Tungaloy insert — ISO turning insert for external and internal turning The CCMT060204 AH8005 Tungaloy insert is an ISO-format rhombic turning insert designed for stable machining of heat-resistant alloys and harder materials, compatible with standard external holders and boring bars ISO CCMT 060204 format PVD-coated AH8005 grade 0.4 mm corner radius for stable finishes Cylindrical hole with single-sided countersink Precision fit and rapid integration for production lines The ISO format ensures straightforward interchangeability: ISO designation, rhombic geometry and defined thickness mean predictable seating in a compatible clamping system, while the specified 7° clearance angle and tolerance classes reduce setup variability. This reliability shortens tool-change time and supports repeatable mounting, which in turn lowers process downtime and contributes to stable cycle times in batch and serial turning operations. For workshops requiring systematic tool management, the standardised form factor simplifies inventory and tooling logistics. Longer tool life under demanding materials and conditions A PVD-coated cemented carbide grade selected for wear resistance, AH8005 offers improved performance when machining heat-resistant alloys and tougher steels. The coating enhances thermal stability at the cutting edge, reducing adhesive wear and maintaining a sharp cutting profile through extended engagement. The result is fewer indexings, consistent surface quality and a better cost-per-component ratio when compared with uncoated alternatives. This performance orientation benefits manufacturers seeking reliable, high-availability inserts for medium- to heavy-duty turning. Geometry engineered for stable cutting and clean chip control The rhombic insert with 0.4 mm corner radius and a single-sided chipbreaker provides a balance between strength and finish; the modest corner radius supports robust edge integrity while enabling fine surface results where required. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°), ensuring secure axial and radial clamping in common holder designs. Plate thickness of 2.38 mm and the CCMT 06 size make the insert suitable for both external and internal turning when paired with the correct external holder, shim and clamp set, with replacement screws available for routine maintenance. Contact Metav Werkzeuge for technical matching of Tungaloy AH8005 inserts, availability details and advice on the optimal holder combination for specific turning tasks Technical data Article number: 6718806-Tungaloy Manufacturer item number: 6718806 Manufacturer SKU: TUN6718806 Model series: ISO turning inserts Format: CCMT060204 Grade: AH8005 Material: cemented carbide Coating: PVD-coated Facts Corner radius: 0.4 mm Relief angle: 7° Thickness: 2.38 mm Insert size: 06 Included angle: 80° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Rhombic plate form Single-sided chipbreaker ISO-standard turning insert for external and internal turning Suitable for heat-resistant alloys and harder materials System components: holder or boring bar, shim/clamp set, replacement screws Manufacturer: Tungaloy FAQ Is this insert suitable for internal turning operations? The CCMT060204 AH8005 insert is intended for both external and internal turning when used with a compatible boring bar or internal holder; correct clamping and the matching shim ensure secure seating and repeatable results. Which materials are best machined with the AH8005 grade? AH8005 is a PVD-coated cemented carbide grade optimised for heat-resistant alloys and harder materials, giving enhanced wear resistance and thermal stability during continuous machining. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius provides a compromise between edge strength and surface quality, supporting stable cuts with good finish while reducing the risk of premature edge chipping under moderate cutting forces. How is the insert secured in the holder? The insert uses a cylindrical hole with a one-sided countersink (40°–60°) for axial and radial locating; combined with the correct clamping set and screws, this ensures consistent positioning and reliable torque transfer. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AH8005 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide grade AH8005, a 0.4 mm corner radius and ISO compatibility for consistent, productive turning of hard and heat-resistant alloys. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. CCMT 060204 AH8005 ISO turning indexable insert — PVD-coated carbide, 0.4 mm radius | Tungaloy CCMT060204 AH8005 is an ISO-format turning insert designed for external and internal turning of heat-resistant and hard materials, delivering stable cutting performance in robust machining setups. PVD-coated carbide grade AH8005 Single-sided chipbreaker for stable chips Rhombic 80° geometry with 0.4 mm radius Cylindrical hole with countersink 40°–60° Reliable cutting performance for industrial turning The insert offers consistent material removal under stable cutting conditions thanks to its PVD-coated carbide construction. The selected grade is engineered for resistance to wear when machining heat-resistant alloys and harder steels, which translates into longer edge life and fewer tool changes. Compatibility with ISO holders is determined by form, clearance angle, tolerance class, clamping and plate thickness, so the component integrates into standard turning tool systems with predictable behaviour and repeatable results. Coating and grade explained: why AH8005 improves process security The AH8005 designation denotes a wear-resistant, PVD-coated carbide grade optimised for thermal stability and edge retention. PVD coating reduces friction and enhances resistance to abrasive and adhesive wear at elevated temperatures; this is particularly important when facing alloys that tend to work-harden. The single-sided chipbreaker supports controlled chip formation, reducing the risk of built-up edge and improving surface quality. In practice, this means fewer interruptions and a more reliable cycle time for batch production or continuous turning operations. Geometry and clamping deliver accuracy and surface finish Featuring an 80° rhombic geometry, a 0.4 mm corner radius and a 7° clearance angle, the insert combines strength at the cutting edge with the ability to produce good surface finishes on external profiles and internal bores. The plate is supplied with a cylindrical hole and a one-sided countersink (40°–60°) for secure seating and repeatable clamping in indexed pockets or on boring bars. The plate thickness of 2.38 mm and the ISO size 06 ensure compatibility with many standard toolholders; correct holder selection and torque on the clamping screw secure stability and minimise vibration for improved dimensional accuracy. Practical selection and application advice for productive machining For best results, select the chipbreaker and grade to match the workpiece material and machining conditions: AH8005 suits heat-resistant alloys and high-hardness tasks where a robust edge is required. The ISO-format plate fits into a system comprising the insert, a matching external holder or boring bar, an underlay/clamping set and spare screws; using the recommended combination supports process reliability and repeatable performance. Where possible, favour stable setups and moderate depth of cut to exploit the wear properties of the grade and to extend overall tool life. For high-process security in turning applications, request the Tungaloy CCMT 060204 AH8005 insert from Metav Werkzeuge and consult our technical advisers at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm holder compatibility and optimal cutting parameters. Technical data Article number: 6749945 SKU: 6749945-Tungaloy Manufacturer SKU: TUN6749945 Designation: CCMT060204 Grade: AH8005 Core specifications ISO size: 06 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Geometry included angle: 80° Special features PVD-coated carbide construction Single-sided chipbreaker Rhombic plate form Cylindrical hole with one-sided countersink (40°–60°) Suitable for turning of heat-resistant and hard materials FAQ What materials is this insert best suited for? The CCMT060204 AH8005 insert from Tungaloy is intended for machining heat-resistant alloys and harder workpiece materials, where the PVD-coated carbide grade provides improved wear resistance. Which toolholders are compatible with the ISO CCMT format? Compatibility is determined by the holder’s form, clearance angle, tolerance class, clamping method, size and thickness; the insert fits standard ISO CCMT pockets when these parameters match the plate’s specifications. How does the chipbreaker affect machining? The single-sided chipbreaker on the insert promotes stable chip formation, aiding evacuation and reducing the likelihood of built-up edge, which leads to more consistent surface finish and fewer interruptions. What are the key geometric values to note for setup? Take account of the 80° rhombic geometry, 0.4 mm corner radius, 7° clearance and 2.38 mm thickness when selecting a holder and setting cutting parameters to ensure secure clamping and desired surface quality. Is the insert supplied with mounting hardware? The insert system typically comprises the ISO plate, a matching external holder or boring bar, an underlay/clamping set and spare screws; check Metav Werkzeuge’s product listing or consult the technical advisers for specific kits. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of PVD-coated carbide performance and ISO interchangeability for consistent turning results on heat-resistant alloys; the geometry with a 0.4 mm corner radius and 7° clearance supports fine surface finishes and stable chip formation. Order the insert directly via Metav Werkzeuge or consult their application specialists for tailored advice. CCMT060204 AH8015 ISO indexable turning insert — Tungaloy CCMT060204 AH8015 is an ISO-format indexable insert intended for general turning of heat-resistant alloys and similar demanding materials; the rhombic CCMT form combines rigidity with versatility for external and internal turning. PVD-coated carbide AH8015 for heat-resistant alloys ISO-standard rhombic CCMT form for interchangeability Single-sided chipbreaker for reliable chip control 7° clearance and 0.4 mm corner radius for fine finishes High thermal resilience with consistent edge behaviour The PVD-coated carbide grade AH8015 is designed as a first choice for the general machining of heat-resistant alloys, offering a deliberate balance between wear resistance and cutting-edge stability. A PVD layer enhances surface hardness and reduces abrasive wear at elevated temperatures, which translates into longer in-service intervals and fewer unplanned tool changes. This makes the insert particularly suitable where thermal loads and workpiece strength would otherwise accelerate flank wear. Reliable fit and fast integration into ISO tool systems Manufactured to ISO geometry, the insert's rhombic CCMT form and 06 size ensure compatibility with a wide range of standard external holders and boring bars; fit depends on form, tolerance class, fastening method, thickness and clearance, so selection should match the holder specification. The insert features a 2.38 mm plate thickness, an 80° included angle and a with hole design with a cylindrical hole plus a one-sided countersink (40°–60°), enabling secure clamping and repeatable seating. The provided 7° clearance and 0.4 mm corner radius support fine surface finish targets while aiding edge strength for interrupted cuts. Stable chip formation and process reliability for productive turning Equipped with a single-sided chipbreaker, this insert promotes controlled chip evacuation in many turning scenarios, reducing the risk of entanglement in long-chipping materials and improving machine uptime. The design supports both external and internal turning operations when combined with an appropriate holder and cutting parameters. For production environments seeking consistent cycle times and reproducible surface quality, the balanced grade and geometry reduce variability in tool life and help maintain part tolerances across batches. Operators and production planners will appreciate the straightforward grade choice for heat-resistant alloys and the predictable wear behaviour that simplifies inventory management. For tailored application support and to secure supply of CCMT060204 AH8015 Tungaloy indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert recommendations and prompt processing Technical data Article number: 6749944 Manufacturer SKU: TUN6749944 Material: carbide Facts ISO designation: CCMT060204 Size: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 80° Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Special features Grade/coating: AH8015, PVD-coated carbide Plate form: rhombic (CCMT) Chipbreaker: single-sided Typical use: external and internal turning; select chipbreaker and grade to match workpiece and stability FAQ What materials is the CCMT060204 AH8015 insert intended for? The CCMT060204 AH8015 insert is optimised for heat-resistant alloys, with a balancing of wear resistance and edge stability that also permits broader use in general turning tasks when cutting data are adjusted accordingly. How is holder compatibility ensured for this insert? Compatibility with holders depends on the ISO-form, clearance angle, tolerance class, fastening method, plate size and thickness; the CCMT060204 follows ISO geometry to enable straightforward integration into standard CCMT holders. Which geometry values are relevant for setting up the tool? Key geometry figures are: 06 size, 2.38 mm thickness, 0.4 mm corner radius, 7° clearance angle and an 80° included angle; the insert also features a cylindrical hole with a one-sided countersink (40°–60°). When should the single-sided chipbreaker be chosen? The single-sided chipbreaker is suitable where controlled chip flow and reduced entanglement are priorities—particularly in long-chipping or difficult-to-break materials; pairing the chipbreaker with appropriate feeds and speeds enhances chip control and surface quality. Is the CCMT060204 AH8015 suitable for internal turning? Yes, the insert is designed for both external and internal turning operations, provided a compatible holder and correct cutting parameters are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated AH8015 carbide and a 0.4 mm nose radius for reliable edge stability and controlled wear in the machining of heat‑resistant alloys; compatible with ISO CCMT holders. Order the insert directly via Metav Werkzeuge or request application advice from our specialists. CCMT 060204 AH8015 Turning Insert — PVD-coated Carbide, 0.4 mm Radius | Tungaloy CCMT 060204 AH8015 is an ISO‑standard rhombic indexable insert for turning, designed for general machining of heat‑resistant alloys and for adaptable use in external and internal turning operations PVD-coated carbide grade AH8015 Optimised for heat‑resistant alloys Rhombic CCMT shape, 80° cutting edge Single-sided chipbreaker, 0.4 mm nose radius High-performance coating and substrate for longer tool life The combination of a PVD-coated surface with a wear‑resistant carbide substrate provides a robust balance between oxidation resistance and cutting‑edge strength. The AH8015 grade is specified for the general machining of heat‑resistant alloys, offering improved resistance to flank and crater wear while maintaining a stable cutting edge. For production environments that prioritise consistency, this coating/substrate pairing reduces the frequency of index changes and contributes to lower overall tooling costs. Geometry that stabilises cutting and improves surface finish The insert’s rhombic CCMT form with an 80° approach angle delivers a secure seating in standard ISO holders and produces predictable chip flow. The 0.4 mm nose radius supports fine finishing passes and good surface integrity without excessive cutting forces. A single-sided chipbreaker is integrated to moderate chip shape and evacuation, which is particularly beneficial when machining less stable setups or interrupted cuts. The moderate relief angle of 7° helps to avoid rubbing and supports controlled metal removal. Practical application guidance and process benefits This indexable insert suits both external and internal turning; selection of the correct chipbreaker and the AH8015 grade should be matched to the workpiece material, the intended depth of cut and machine‑tool stability. When paired with a suitable external holder or boring bar, the insert enables predictable cycle times and repeatable component tolerances. The PVD finish makes the grade especially useful where elevated temperatures occur at the cutting zone, preserving the cutting edge and enabling longer uninterrupted production runs. System compatibility and handling in the workshop The insert is part of an ISO‑standard system comprising the insert, a matched external holder or boring bar, supporting shim/clamp sets and replacement screws. Compatibility is determined by the insert form, clearance angle (7°), tolerance class, clamping method, size (06) and thickness (2.38 mm). The cylindrical hole with a single-sided countersink (40°–60°) simplifies secure fastening and repeatable positioning during index changes. Routine handling is straightforward and indexing restores cutting performance without regrinding. For application advice, availability or to request a cutting test recommendation for the Tungaloy CCMT 060204 AH8015 insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6825743 Manufacturer SKU: TUN6825743 SKU: 6825743-Tungaloy Manufacturer: Tungaloy Model series: ISO turning indexable inserts Facts Nose radius: 0.4 mm Relief angle: 7° Approach angle: 80° Thickness: 2.38 mm Insert size: 06 Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features PVD-coated carbide Grade AH8015 Rhombic CCMT shape Single-sided chipbreaker Compatible with ISO CCMT holders (form, clearance, tolerance, clamping, size, thickness) Intended use: turning (external and internal) Typical system: insert, external holder/boring bar, shim/clamp set, replacement screws FAQ Which materials is this insert best suited for? The CCMT 060204 AH8015 insert is specified as a first choice for the general machining of heat‑resistant alloys; matching the chipbreaker and cutting data extends its use to a range of common turning tasks. What are the key geometric characteristics to note? Key dimensions include a 0.4 mm nose radius, 7° clearance, 80° approach angle, 2.38 mm thickness and the CCMT rhombic form with a cylindrical hole and single‑sided countersink. How is compatibility with a toolholder ensured? Compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; these factors must match the chosen ISO‑standard holder for secure, repeatable seating. Can the insert be used for internal turning and finishing passes? Yes, the geometry and 0.4 mm nose radius make the insert suitable for both internal turning and light finishing passes when mounted in the appropriate boring bar. How should the chipbreaker and grade be selected for a given job? Selection should be based on the workpiece material, cut depth and machine/tooling stability; the AH8015 grade provides a compromise between wear resistance and edge stability and works well with the specified chipbreaker for heat‑resistant alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AH8015 Wendeplatten - Tungaloy
Take advantage of a balanced combination of wear resistance and edge stability for consistent turning performance; the PVD-coated carbide grade AH8015 and the 0.4 mm corner radius deliver predictable results on heat-resistant alloys. Order directly via Metav Werkzeuge or request tailored advice from our consultants. CCMT 060204 AH8015 indexable insert for turning — Tungaloy CCMT060204 AH8015 Tungaloy-Wendeplatte designed for ISO-spec turning of heat-resistant alloys with a one-sided chipbreaker ISO‑format rhombic insert for turning PVD‑coated carbide AH8015 0.4 mm corner radius for reliable finishes One-sided chipbreaker for stable chip control High-precision cutting that improves cycle consistency and reduces rework The PVD-coated carbide grade offers an optimised balance between wear resistance and edge toughness, making it a sound choice for repetitive turning operations on heat-resistant alloys. The rhombic geometry with an included angle of 80° ensures stable engagement and reduced vibration, which translates into fewer rejects and more predictable cycle times. For shops aiming to improve throughput, the controlled geometry reduces chatter and supports consistent surface quality without frequent insert changes. Durable edge geometry and controlled chip formation for safer machining The single-sided chipbreaker combined with a 0.4 mm radius provides a compromise between strength and surface finish: stronger edges for interrupted cuts, yet fine enough for acceptable finishes in semi-finish and finishing passes. Chip formation is directed by the insert’s relief and chipbreaker design, reducing entanglement and improving tool life. The 7° relief angle helps to manage cutting forces and thermal loads, extending service intervals and lowering tooling consumption in demanding materials. Compatibility guidance to integrate the insert into existing toolrooms This ISO‑format insert is intended for use with compatible holders matching form, clearance, tolerance class, clamping method, size and thickness; the system comprises the insert, a matching external holder or boring bar, a clamp or shim set and replacement screws. The plate is supplied with a hole featuring a cylindrical bore and a single‑side countersink (40°–60°), simplifying secure clamping. With a thickness of 2.38 mm and ISO designation 060204, this insert links readily into standard tooling systems and helps avoid adapter costs when holders are correctly specified. Contact Metav Werkzeuge for a technical fit check or to request a quotation for Tungaloy turning inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6825781 SKU: 6825781-Tungaloy Manufacturer SKU: TUN6825781 Manufacturer: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts ISO designation: 060204 Size: 06 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Special features PVD‑coated carbide grade AH8015 Rhombic plate form With hole: cylindrical bore + one‑side countersink (40°–60°) One‑sided chipbreaker Designed for turning applications Compatibility depends on form, relief, tolerance class, clamping and size FAQ What materials is this insert best suited for? The CCMT060204 AH8015 insert is formulated for general machining of heat‑resistant alloys; the PVD‑coated carbide composition provides a compromise between wear resistance and edge stability for such materials. Can this insert be used in existing ISO holders? Yes; the insert follows ISO dimensions (060204) and a standard thickness of 2.38 mm, so it will fit holders that match form, relief, tolerance class, clamping method and size. How does the one-sided chipbreaker affect machining? The one‑sided chipbreaker on the AH8015 grade directs chips reliably for turning operations, improving evacuation and reducing the risk of chip control issues in both continuous and interrupted cuts. What performance benefits does the AH8015 PVD coating bring? The PVD coating on the AH8015 carbide enhances resistance to abrasion and thermal wear, delivering longer service life and consistent edge behaviour when turning demanding alloys. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060204 AH8015 Wendeplatten - Tungaloy
Benefit from the combination of a PVD‑coated AH8015 carbide grade, ISO rhombic geometry with a 0.4 mm corner radius and a 7° clearance angle for consistent turning of heat‑resistant alloys; these features deliver a reliable balance of wear resistance and edge stability. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. CCMT 060204 AH8015 Tungaloy turning insert — ISO rhombic, PVD‑coated carbide The CCMT060204 AH8015 is a rhombic ISO turning insert engineered for external and internal turning of heat‑resistant alloys with standard clamping systems. ISO rhombic geometry, compatible with standard holders PVD-coated AH8015 carbide for heat-resistant alloys 0.4 mm corner radius for versatile turning Cylindrical hole with 40°–60° countersink Reliable performance for demanding turning operations The combination of a PVD‑coated surface and AH8015 carbide creates an insert that is optimised for elevated temperatures and abrasive conditions commonly encountered when machining heat‑resistant alloys. The coating reduces adhesive wear and extends tool life, while the substrate retains cutting‑edge stability under intermittent and continuous cuts. This results in fewer insert changes, more predictable cycle times and a stable productivity profile for batch and single‑piece production alike. Predictable chip control and consistent edge life A single‑sided chipbreaker together with the 0.4 mm corner radius and the 7° clearance angle provides controlled chip formation and reliable surface finish on a range of workpiece materials. The insert’s 80° included angle distributes cutting forces to improve edge robustness and reduce vibration on less rigid setups. For operations that prioritise dimensional consistency, this geometry supports repeatable results with reduced risk of edge chipping and unexpected downtime. Seamless integration with ISO clamping systems Designed to ISO dimensions, the insert fits standard rhombic pockets and is secured via the provided hole geometry: a cylindrical hole with a 40°–60° countersink, which ensures correct seating and repeatable positioning in compatible holders. With a plate thickness of 2.38 mm and size code 06, the component integrates into existing toolrooms without special adapters. Selection of an appropriate holder should consider form, clearance, tolerance class, fastening and insert thickness to guarantee optimum contact and heat dissipation. Application guidance and process relevance This turning insert is a first‑choice grade for general machining of heat‑resistant alloys where a balance between wear resistance and edge toughness is required. The CCMT060204 AH8015 insert suits both external and internal turning when paired with a matching external holder or boring bar, under stable machining conditions. For tailored recommendations on cutting parameters or holder selection, consult Metav Werkzeuge to align the insert’s capabilities with the specific workpiece material and machine dynamics. For tailored recommendations on the Tungaloy CCMT060204 AH8015 insert and optimal holder selection, contact Metav Werkzeuge for application advice: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6749946 Manufacturer article number: 6749946 Manufacturer SKU: TUN6749946 SKU: 6749946-Tungaloy Model series: ISO turning inserts Designation: CCMT060204 AH8015 Tungaloy insert Material: carbide Coating / grade: PVD-coated, AH8015 Shape: rhombic With hole: yes Facts Corner radius: 0.4 mm Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Size code: 06 Special features Single-sided chipbreaker Cylindrical hole with 40°–60° countersink ISO-standard dimensions for compatibility Suitable for external and internal turning Balanced wear resistance and edge stability for heat-resistant alloys Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The Tungaloy CCMT060204 AH8015 insert is designed primarily for machining heat‑resistant alloys; its PVD‑coated AH8015 carbide provides a balance between wear resistance and edge stability for these materials. Which holders are compatible with this ISO insert? Holders compatible with ISO rhombic inserts that accept size 06 and the specified thickness 2.38 mm are suitable; correct seating depends on form, clearance, tolerance class and the cylindrical hole with 40°–60° countersink provided. How does the single‑sided chipbreaker affect performance? The single‑sided chipbreaker improves chip control and surface finish in many turning operations; on the CCMT060204 AH8015 it supports consistent chip formation while preserving cutting‑edge stability. Is the insert suitable for internal turning? Yes, the insert’s geometry and ISO‑standard dimensions permit use for both external and internal turning when paired with an appropriate boring bar or internal holder. What is the correct way to specify this product when ordering? Specify the full designation and SKU: CCMT060204 AH8015 Tungaloy insert, SKU 6749946‑Tungaloy, to ensure accurate identification of the PVD‑coated AH8015 carbide grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 060204 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated AH8015 grade, ISO compatibility and a secure clamping geometry for reliable turning of heat-resistant alloys; order the insert directly via Metav Werkzeuge or consult the technical team for process-adapted recommendations. CCMT 060204 AH8015 ISO rhombic indexable turning insert for turning — Tungaloy A CCMT 060204 AH8015 indexable insert designed for external and internal turning of heat-resistant alloys, offering a balanced mix of wear resistance and edge stability. PVD-coated carbide AH8015 for heat-resistant alloys ISO rhombic insert CCMT 060204, 7° clearance Single-sided chipbreaker for controlled chip flow Cylindrical hole with 40°–60° countersink for secure clamp Stable performance for demanding alloy turning The PVD-coated AH8015 grade is formulated for the general machining of heat-resistant alloys, delivering a compromise between wear resistance and cutting-edge robustness. A PVD coating reduces adhesion and thermal softening at the cutting edge, which means longer, more predictable tool life under elevated temperatures. For production environments where material mix and cycle times vary, this insert maintains cutting performance and helps avoid unscheduled tool changes, supporting greater process stability and throughput. Secure fit and consistent clamping for repeatable results Compliance with ISO dimensions simplifies toolholder selection: form, clearance, tolerance class, fastening and thickness determine compatibility with standard holders and boring bars. The rhombic 06 format and the cylindrical hole with a one-sided countersink (40°–60°) ensure a stable mechanical location and reliable torque transfer to the clamp. The 7° clearance angle reduces rubbing on the flank, contributing to consistent surface finish and reducing the risk of built-up edge during continuous turning operations. Controlled chip formation and improved surface quality A single-sided chipbreaker offers reliable chip control for many turning tasks, while the 0.4 mm corner radius and a plate thickness of 2.38 mm provide the necessary rigidity for steady cuts. The modest corner radius helps achieve good edge strength without sacrificing surface integrity on components that require a fine finish. In short-cycle production or batch work, these design choices translate into fewer interruptions for chip management and a higher first-pass yield. For machining heat-resistant alloys with documented process stability, request the CCMT 060204 AH8015 indexable insert from Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 to discuss holder compatibility and cutting data. Technical data Article number: 6749950 SKU: 6749950-Tungaloy Manufacturer SKU: TUN6749950 Brand: Tungaloy Model series: ISO turning inserts Facts Corner radius: 0.4 mm Plate thickness: 2.38 mm Plate size: 06 ISO code: 060204 Lead/insert angle: 80° Clearance angle: 7° Special features Material: carbide Coating: PVD Plate shape: rhombic Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning Grade/Specialty: AH8015 — for heat-resistant alloys FAQ What materials is this insert suitable for? The CCMT 060204 AH8015 indexable insert is intended primarily for heat-resistant alloys; the AH8015 grade and PVD coating offer balanced wear resistance and edge stability for such materials. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) provides secure seating and reliable clamping force for the Tungaloy insert, reducing movement during cutting and improving repeatability. Can this insert be used for both external and internal turning? Yes — the ISO rhombic format and specified geometry make the CCMT 060204 AH8015 suitable for both external and internal turning operations when paired with compatible holders or boring bars. What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius gives a compromise between cutting-edge strength and surface finish, enabling stable cuts while helping to achieve a consistent finish on turned parts. Is the insert compatible with standard ISO holders? The insert follows ISO dimensions (060204) and is compatible with holders that match the form, clearance, tolerance class, fastening method, size and thickness as specified for ISO turning inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 AT9530 Wendeplatten - Tungaloy
Take advantage of the combination of a coated cermet grade (AT9530) and a 0.4 mm nose radius for consistent surface quality and predictable wear behaviour; the ISO format ensures straightforward replacement and compatibility with standard holders. Order the CCMT060204 AT9530 insert directly via Metav Werkzeuge or ask our consultants if needed. CCMT 060204 AT9530 turning insert for finishing — Tungaloy A CCMT060204 AT9530 ISO turning insert optimised for finishing and light turning of steel, providing reliable surface quality and even wear in stable setups. Coated cermet grade AT9530 for finishing 0.4 mm nose radius for superior surface finish Rhombic CCMT shape, 7° clearance angle Cylindrical hole with 40°–60° countersink Achieve consistent finishing with a coated cermet grade The insert is specified for finishing and light machining of steel, where surface quality and uniform wear are primary concerns. The AT9530 coated cermet delivers a fine-grained cutting edge that reduces built-up edge and promotes repeatable finishes. In practical terms, this means fewer passes to reach tolerance and less time spent on secondary processes. Because the grade is designed for stable wear behaviour, process planning becomes more predictable and scrap rates are reduced. The combination of a controlled edge geometry and a wear-resistant coating helps maintain dimensional accuracy over a series of components, which benefits batch production and small-series finishing alike. Designed for predictable fit and secure clamping in ISO systems Compatibility is determined by form, clearance, tolerance class, fastening, size and thickness; the ISO CCMT060204 format aligns with widely used holders and tool systems. The rhombic geometry with a 7° clearance angle provides a balance between cutting-edge engagement and strength, while the cylindrical hole with a 40°–60° countersink secures the insert on the clamping seat. When planning a toolset, select holders that match the CCMT profile and tolerance class to ensure the correct rake, overhang and rigidity. Proper clamping and a matched insert-seat interface reduce vibration and support consistent tool life, which in turn supports process stability on lathes and turning centres. Practical machining guidance based on geometry and chip control The 0.4 mm nose radius is engineered to favour surface finish without demanding high cutting depths; a small radius allows fine feeds for improved roughness while still providing sufficient edge strength for light finishing passes. The insert’s single-sided chipbreaker is intended to assist chip control during external and internal turning operations when paired with appropriate feeds and cutting conditions. For finishing cuts, combine modest depth of cut with a lower feed to exploit the radius for surface integrity; for unstable setups, consider a different chipbreaker or a more robust grade, as the AT9530 prioritises finish and even wear over heavy material removal. Process benefits and suitability for production environments Using this insert in a standardized ISO format contributes to reduced tool change complexity and predictable inventory management. The coated cermet composition emphasises surface quality and even flank wear, which lowers rework and inspection effort in finishing operations. For production environments where component appearance and dimensional repeatability are important, the insert offers a reliable option for steel turning applications that require fine finishes. The ISO format and common geometry simplify replacement logistics, enabling quicker changeovers and less downtime when matching inserts are stocked. Contact Metav Werkzeuge for expert advice on selecting Tungaloy CCMT060204 AT9530 inserts for finishing steel and to arrange direct supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6763902 SKU: 6763902-Tungaloy Manufacturer SKU: TUN6763902 Designation: CCMT060204 AT9530 Tungaloy insert Material: carbide Grade/coating: AT9530 (coated cermet) Shape: rhombic Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Thickness: 2.38 mm Corner radius: 0.4 mm Facts ISO code: 060204 Size: 06 Clearance angle: 7° Included angle: 80° Plate thickness: 2.38 mm Nose radius: 0.4 mm Special features Single-sided chipbreaker Intended use: turning (external and internal), finishing and light machining of steel ISO-standard turning insert series Compatibility depends on form, clearance, tolerance class, fastening, size and thickness System concept: insert, suitable external holder or boring bar, backing/clamping set and replacement screws FAQ What applications is this insert best suited to? This CCMT060204 AT9530 Tungaloy turning insert is best suited to finishing and light machining of steel where surface quality and uniform wear are priorities. How does the 0.4 mm nose radius affect machining? A 0.4 mm nose radius improves surface finish by allowing finer feeds for finishing passes while maintaining sufficient edge strength for light cutting on steels with stable setups. Will this insert fit standard holders for CCMT inserts? Yes; the insert follows ISO CCMT dimensions. Compatibility is determined by form, clearance, tolerance class, fastening, size and thickness and requires a matching CCMT holder. What chip control can be expected from the insert? The insert features a single-sided chipbreaker designed to assist chip evacuation during turning; chip shape and performance depend on workpiece material, feed and depth of cut. Is this grade suitable for heavy roughing? The AT9530 coated cermet is optimised for finishing and light machining rather than heavy roughing; for high metal removal rates a more robust grade or geometry is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of PCD cutting performance, long tool life and precise ISO geometry for reliable turning operations; order the CCMT 060204 DX120 insert directly via Metav Werkzeuge or ask the consultants for application advice. CCMT 060204 DX120 indexable insert for turning — Tungaloy CCMT 060204 DX120 is a PCD-grade indexable insert designed for high-speed machining of aluminium and non-ferrous materials, supplied in ISO CCMT 06 geometry for external and internal turning. PCD cutting material DX120 for high speeds ISO CCMT 06 geometry with 0.4 mm nose radius Suitable for aluminium and non-ferrous metals Cylindrical hole with single-side countersink Maximise productivity with a PCD grade built for speed and longevity The PCD cutting layer of the DX120 grade delivers extremely high cutting speeds and very long tool life when machining aluminium and abrasive non-metals. Polycrystalline diamond enables low wear rates and excellent surface finish, which reduces downtime for insert changes and lowers overall machining costs. Where process stability allows, selecting a PCD grade significantly increases productivity compared with conventional carbide grades, especially in continuous production of non-ferrous components. Secure clamping and geometry for repeatable, accurate turning The insert’s ISO CCMT 06 form and rhombic geometry provide a stable cutting edge and predictable engagement with the workpiece. The cylindrical hole with a single-side countersink (40°–60°) ensures positive seating and repeatable clamping, while the 7° clearance supports reliable chip evacuation and reduces rubbing. These features together improve positional repeatability and make the insert well suited to holders and boring bars that conform to ISO tolerances. Optimised edge and dimensions for finishing and light roughing A 0.4 mm nose radius and 2.38 mm thickness allow fine surface finishes and controlled chip formation in delicate turning operations. The relatively small radius supports precise profile machining and minimal vibration in well-supported setups. When combined with a suitable single-side chipbreaker, the cutting edge promotes stable chip formation and consistent surface integrity, making the grade appropriate for both finishing passes and certain interrupted cuts on aluminium alloys and similar materials. System considerations and recommended workflow The ISO indexable insert is part of a system comprising the insert, a matching external holder or boring bar, a shim/lock set and replacement screws. Compatibility depends on form, clearance, tolerance class, fixing method, size and thickness; choosing a holder that matches the CCMT 060204 geometry and clamping style is essential for secure performance. For best results, pair the insert with a rigid toolholder and maintain consistent coolant or air-blast strategies suited to PCD cutting, avoiding toolholders that introduce excessive run-out. For procurement or detailed application support on Tungaloy DX120 PCD inserts, contact Metav Werkzeuge — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for rapid advice and availability. Technical Data Item designation: CCMT060204 DX120 Tungaloy indexable insert Manufacturer article number: 6822152 Manufacturer SKU: TUN6822152 SKU: 6822152-Tungaloy Model series: ISO turning indexable inserts Facts Nose radius: 0.4 mm Plate thickness: 2.38 mm Clearance angle: 7° Included angle: 80° Size: 06 Special features Cutting material: polycrystalline diamond (PCD) Grade: DX120 Body material: cemented carbide Hole: with cylindrical hole and single-side countersink (40°–60°) Chipbreaker: single-side chipbreaker Application: turning (external and internal) FAQ What materials is this insert intended for? The CCMT 060204 DX120 insert is designed primarily for aluminium and non-ferrous metals as well as abrasive non-metallic materials; the PCD DX120 grade provides extended life in these applications. Can the insert be used for internal turning as well as external turning? Yes, the ISO CCMT 06 geometry and the specified dimensions allow the insert to be used for both external and internal turning, provided the selected holder and setup offer sufficient rigidity. How does the 0.4 mm nose radius affect the surface finish? A 0.4 mm nose radius helps achieve finer surface finishes and more accurate profiles in finishing passes while still permitting light roughing when the machine setup is stable. What clamping features ensure repeatable seating? The cylindrical hole with single-side countersink provides secure, repeatable clamping when used with compatible shims and screws, reducing positional variation between indexings. Is the insert compatible with standard ISO CCMT holders? Compatibility is determined by form, clearance, tolerance class, fixing, size and thickness; the insert is made to ISO CCMT 06 specifications and matches holders designed for that standard. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 F235 Indexable Insert - Sandvik
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts CCMT 060204 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT060204UF235-SANDVIK Facts for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Grade: F235 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Sandvik. 40START indexable-inserts-CCMT-060204-F235-Sandvik 40END
CCMT 060204 GH730 Wendeplatten - Tungaloy
Combining proven wear resistance, stable cutting-edge integrity and standardised ISO compatibility, this insert supports productive turning operations with predictable tool life and consistent surface finish. Take advantage of the balanced geometry and Tungaloy's GH730 grade for robust machining; order the CCMT060204 directly via Metav Werkzeuge or ask our consultants if needed. CCMT 060204 GH730 Tungaloy turning insert — ISO rhombic 80° for external and internal turning The CCMT060204 GH730 is an ISO rhombic turning insert designed for general-purpose external and internal turning, offering a balance of edge strength and wear resistance for a wide range of turning tasks. ISO rhombic insert 80° geometry GH730 Tungaloy carbide grade 0.4 mm corner radius for strength Cylindrical hole with countersink 40°–60° Consistent productivity through material and grade The combination of cemented carbide substrate with the GH730 grade offers enhanced wear resistance without sacrificing toughness. This balance reduces the frequency of tool changes and maintains cutting-edge integrity under interrupted cuts. When mounted in a suitable toolholder, the cutting edge sustains dimensional stability over longer runs, which translates directly into higher throughput and fewer rework cycles. The grade is especially useful where a compromise between abrasion resistance and edge stability is required. Reliable fit and clamping for repeatable results Designed to the ISO specification, compatibility with the toolholder depends on form, relief angle, tolerance class, fastening, size and thickness. The CCMT060204 features a rhombic 80° form and a cylindrical hole with a one-sided countersink (40°–60°) that ensures secure clamping and repeatable seating. Using the correct shim and clamp set prevents movement under cutting loads and preserves the intended cutting geometry. Clear, repeatable mounting helps to avoid chatter and secures consistent surface quality part after part. Geometry tuned for edge strength and surface finish The rhombic 80° shape combined with a 0.4 mm corner radius gives a robust cutting edge capable of handling moderate depths of cut while helping to produce stable surface finishes. The 7° relief angle reduces rubbing and heat generation at the flank, while the single-sided chipbreaker promotes controlled chip formation for common turning tasks. A plate thickness of 2.38 mm supports the insert in the pocket and contributes to mechanical stability under load, reducing the risk of insert breakage during interrupted cuts. Practical system guidance and typical applications This insert is intended for turning operations; select the chipbreaker and grade to suit the workpiece material, machining strategy and machine stability. The typical system includes the ISO insert, a matching external holder or boring bar, a support shim or clamp set and replacement screws to maintain consistent assembly. For tougher materials or heavy cuts choose a more robust chipformer and ensure rigidity in the clamping system. For finishing passes, consider a finer feed and the same geometry to keep surface quality high while taking advantage of the grade's wear resistance. For application-specific advice or to order the CCMT060204 GH730 turning inserts from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and delivery options. Technical data Article number: 6820962 Manufacturer SKU: TUN6820962 Brand: Tungaloy Designation: CCMT060204 GH730 Facts Corner radius: 0.4 mm Insert angle: 80° Relief angle: 7° Thickness: 2.38 mm Size: 06 Special features Cemented carbide composition GH730 Tungaloy grade Rhombic shape (80°) Single-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) ISO-standard turning insert System components: insert, holder/boring bar, support shim, clamp set, replacement screws FAQ What materials is this insert suitable for? The CCMT060204 GH730 insert is a general-purpose turning grade; the GH730 composition supports a broad material range and is chosen according to workpiece material and machining strategy. How does the rhombic 80° geometry affect cutting? An 80° rhombic shape increases edge strength and is suitable for both external and internal turning where a balance of robustness and accessibility is required. What does the hole and countersink provide? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure clamping and exact seating in standard ISO toolholders, improving repeatability and reducing vibration. Which system parts are required for safe operation? A matching external holder or boring bar, proper support shim or clamp set and correct replacement screws complete the system and ensure stable, repeatable machining. Is this insert suitable for finishing passes? Yes; with the 0.4 mm corner radius and GH730 grade, the insert can deliver good surface finishes when used with appropriate feeds and cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GH730 Wendeplatten - Tungaloy
Taking advantage of ISO standardisation and the GH730 Tungaloy grade, this rhombic carbide insert delivers consistent wear resistance and stable cutting-edge performance; its 0.4 mm corner radius and secure hole geometry ensure reliable clamping and repeatable results for turning operations. Order directly via Metav Werkzeuge or consult their specialists for application-specific guidance. CCMT 060204 GH730 Tungaloy indexable insert for turning (ISO CCMT060204) The CCMT060204 GH730 is a rhombic ISO indexable insert designed for external and internal turning, offering a balanced combination of wear resistance and cutting-edge stability for industrial machining. ISO size CCMT 06 (060204) for standard holders GH730 grade for high wear resistance 0.4 mm corner radius for general turning Cylindrical hole with 40°–60° countersink Longer tool life through a wear-resistant grade The insert is manufactured from solid carbide and specified in the GH730 grade, which combines abrasion resistance with sufficient toughness to resist chipping under typical turning loads. This composition reduces flank wear and extends cutting intervals, translating into fewer tool changes and improved uptime on production lathes. The result is a stable cutting edge that supports consistent dimensional accuracy over longer component runs. Secure clamping and precise fit for ISO systems Designed as an ISO-standard rhombic insert, the geometry—including the cylindrical hole with a one-sided countersink (40°–60°) and the 7° clearance—ensures compatibility with a wide range of external holders and boring bars. The 2.38 mm plate thickness and clearly defined tolerances assist in repeatable seating and accurate axial and radial positioning, reducing the risk of movement under load. This reliability in clamping improves part consistency and minimises rework. Chip control and application-focused geometry The single-sided chipbreaker and the rhombic form factor provide stable chip formation for a range of turning tasks, from finishing to profile cuts. The 0.4 mm corner radius offers a practical compromise between edge strength and surface finish, suitable for general-purpose external and internal turning. By selecting the appropriate chipbreaker and the GH730 composition, shops can adapt the insert to different materials and machining strategies while maintaining process security. Practical compatibility and system integration As part of the ISO indexable insert family, the component integrates into a system comprising the insert, a matching external holder or boring bar, and the necessary clamping hardware. Compatibility is governed by form, clearance angle, tolerance class, fastening type, size and thickness—factors that determine fit and performance. The insert is therefore best specified alongside the chosen holder geometry to ensure optimal cutting conditions and predictable tool life. For industrial turning applications that demand dependable wear resistance and consistent clamping, request the Tungaloy CCMT060204 GH730 inserts via Metav Werkzeuge or contact Metav Werkzeuge’s consultants at info@metav-werkzeuge.com or +49 2822 7131930 for selection support and ordering. Technical data Article number: 6820961 SKU: 6820961-Tungaloy Manufacturer SKU: TUN6820961 Material: carbide Model series: ISO-Drehwendeschneidplatten Designation: CCMT060204 GH730 Tungaloy indexable insert Description: CCMT060204 GH730 Tungaloy indexable insert. ISO-standard indexable turning plates; holder compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness Dimensions & angles Size: 06 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Main angle: 80° Design & special features Plate form: rhombic Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Grade/coating: GH730 Tungaloy grade Typical application: turning System components: ISO insert, matching external holder or boring bar, support/fastening kit and replacement screws FAQ What materials can this insert machine effectively? The GH730 composition on the CCMT060204 insert is formulated for general turning and delivers reliable wear resistance across a wide range of steels and alloyed materials commonly encountered in workshop production. Is the insert compatible with standard CCMT holders? Yes, the insert follows the ISO CCMT060204 specification and is compatible with holders designed for CCMT 06 inserts, provided the holder matches the form, clearance angle and fastening method. How does the 0.4 mm corner radius affect finish and strength? A 0.4 mm radius offers a balance between edge strength and surface finish; it improves resistance to edge chipping while delivering a satisfactory surface quality for general turning operations. Does the insert require a specific screw or clamp style? Clamping must match the ISO geometry and the insert’s hole style; the CCMT060204 includes a cylindrical hole with a one-sided countersink (40°–60°) for secure seating in standard clamping systems. Can this insert be used for internal and external turning? Yes, the rhombic form and single-sided chipbreaker make the insert suitable for both external and internal turning tasks when combined with the appropriate holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GH730 Wendeplatten - Tungaloy
Benefit from the combination of a wear‑resistant GH730 grade and a precise 0.4 mm corner radius for consistent, repeatable results in turning operations. Order the CCMT060204 GH730 insert via Metav Werkzeuge or request technical advice from our consultants. CCMT 060204 GH730 turning insert — Tungaloy CCMT060204 GH730 is an ISO‑normed rhombic turning insert designed for external and internal turning with a single‑sided chipbreaker. ISO‑normed CCMT geometry GH730 wear‑resistant carbide grade 0.4 mm corner radius for fine profiles Cylindrical hole with countersink (40°–60°) Consistent chip control for productive turning The insert delivers controlled chip formation thanks to its single‑sided chipbreaker and the tailored geometry of the rhombic cutting edge. The GH730 grade combines wear resistance with edge stability, which results in longer service life and fewer interruptions for edge changes. This balance of properties supports stable metal removal in both roughing and finishing passes, reducing downtime and improving overall process efficiency. The 0.4 mm corner radius helps to maintain profile accuracy while resisting edge chipping under intermittent cuts. Precision fit and reliable clamping for repeatable parts Designed to the ISO CCMT specification, the insert ensures predictable seating and orientation in compatible holders. The 7° clearance and 2.38 mm thickness contribute to a secure fit and consistent cutting geometry, while the cylindrical hole + countersink (40°–60°) enables positive and reproducible clamping torque. These features minimise variation between inserts and permit high repeatability across batches, which is essential for tight tolerance production and automated turning cells. Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness. Durable carbide grade and application guidance Manufactured from carbide and supplied in the GH730 specification, the insert is intended specifically for turning applications where a combination of wear resistance and edge toughness is required. The rhombic shape offers versatile approach angles for both external and internal turning. System composition typically includes the ISO insert, an appropriate external holder or boring bar, a seating pad or clamp set, and replacement screws. Select the chipbreaker and grade to match the workpiece material and the required machining stability to achieve consistent surface finish and tool life. For demanding turning tasks opt for the Tungaloy CCMT060204 GH730 insert — contact Metav Werkzeuge for availability and specialised technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6820963 SKU: 6820963-Tungaloy Manufacturer SKU: TUN6820963 Model series: ISO turning inserts Facts Radius: 0.4 mm Clearance angle: 7° Included angle: 80° Thickness: 2.38 mm Size: 06 Special features Material: carbide Grade: GH730 Shape: rhombic Chipbreaker: single‑sided Hole: cylindrical hole + single‑side countersink (40°–60°) ISO designation: CCMT060204 Application: Turning FAQ What materials is the CCMT060204 GH730 insert suitable for? The CCMT060204 GH730 insert (Tungaloy) is formulated to offer broad application potential; the GH730 grade performs well where wear resistance and edge stability are required, making it suitable for a variety of steels and general turning tasks. How does the 0.4 mm corner radius affect machining results? A 0.4 mm corner radius on the CCMT060204 GH730 helps distribute cutting forces and reduces the risk of chipping, giving improved profile accuracy and longer edge life during interrupted or unstable cuts. Which holder characteristics must be matched for secure clamping? Secure clamping requires a holder that matches the ISO CCMT form, the specified relief (7°), the tolerance class, the insert size and thickness; correct seating and the cylindrical hole with countersink ensure reproducible fixation for the CCMT060204 GH730 insert. Can the CCMT060204 GH730 be used for both internal and external turning? Yes, the rhombic geometry and the chipbreaker design allow the CCMT060204 GH730 insert (Tungaloy) to be employed in both external and internal turning operations when paired with an appropriate external holder or boring bar. What length of service life can be expected from the GH730 grade? Service life depends on workpiece material, cutting data and stability, but the GH730 grade is engineered to balance wear resistance and toughness to provide reliable tool life in routine turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GT9530 Wendeplatten - Tungaloy
High wear resistance and a fine surface finish reduce downtime while maintaining consistent turning performance; compatibility with ISO holders ensures straightforward integration into existing tool systems. Order the CCMT060204 GT9530 directly via Metav Werkzeuge or ask the consultants for application-specific guidance. CCMT060204 GT9530 Tungaloy indexable insert for turning (ISO 060204) The CCMT060204 GT9530 Tungaloy indexable insert is a coated cermet grade engineered for external and internal turning where superior surface quality and extended tool life are required. Wear-resistant GT9530 coated cermet ISO 060204 rhombic insert form 0.4 mm nose radius for fine finish Cylindrical hole with 40°–60° countersink Consistent finish and longer tool life for finishing operations The GT9530 coated cermet grade provides a combination of hardness and toughness that is optimised for finishing and light universal turning of steel. The coating and substrate reduce flank wear and support a steady cutting edge, which translates into more parts per edge change and fewer interruptions to production. Cermets merge ceramic hardness with a metallic binder to offer a harder, more wear-resistant face than conventional carbides while retaining sufficient toughness for stable conditions; this results in noticeably improved surface finish and longer service intervals compared with uncoated grades. ISO compatibility and secure clamping reduce setup time The rhombic geometry and ISO designation enable straightforward interchangeability with standard holders; the insert’s dimensions and tolerances determine compatibility via shape, clearance angle, tolerance class, fixing style, size and thickness. Key dimensions such as ISO 060204, 2.38 mm thickness and a 7° clearance angle ensure predictable seating in ISO clamps. The cylindrical hole with a one-sided countersink (40°–60°) provides reliable axial and radial locating, improving repeatability when replacing inserts and reducing setup effort on the shop floor. Tailored cutting performance for steel with controlled chipflow Equipped with a one-sided chipbreaker and a 0.4 mm nose radius, this insert is tuned for fine surface results and stable chip formation in finishing passes. The grade is intended for stable setups where controlled cutting forces and consistent thermal behaviour are important; selecting the appropriate chipbreaker and machining parameters will maximise the benefit of the GT9530 grade. The small nose radius aids in achieving the required tolerances and visual quality on turned components while limiting the tendency for build-up on the cutting edge. Practical system design to support productivity The recommended system consists of the ISO indexable insert, a matching external holder or boring bar, a shim/clamp set and replacement screws to maintain fixture integrity. The carbide substrate provides a robust base for the coating, combining to deliver predictable edge stability under continuous operation. Where process reliability is paramount, selecting the correct holder geometry and ensuring rigid clamping will take full advantage of the insert’s wear characteristics and help to uphold part-to-part consistency across production runs. For precision finishing on steel where surface quality and longer tool life matter, contact Metav Werkzeuge for tailored application advice and immediate supply of Tungaloy CCMT060204 GT9530 indexable inserts. Technical data Article number: 6998303 Manufacturer article number: 6998303 SKU: 6998303-Tungaloy Manufacturer SKU: TUN6998303 Brand: Tungaloy Model series: ISO turning indexable inserts Designation: CCMT060204 GT9530 Facts Nose radius: 0.4 mm Thickness: 2.38 mm Free angle / clearance: 7° Included angle: 80° Size: 06 Countersink angle: 40°–60° Special features Grade/coating: GT9530 (coated cermet) Substrate material: carbide Shape: rhombic Hole: cylindrical hole with one-sided countersink Chipbreaker: one-sided Application: external and internal turning Compatibility: ISO 060204 holders FAQ What materials is this insert suitable for? The CCMT060204 GT9530 insert is designed primarily for steel and performs best in finishing to light universal turning under stable conditions with good surface finish requirements. How does the GT9530 grade influence tool life and finish? The GT9530 coated cermet offers increased wear resistance and thermal stability compared with uncoated carbide, resulting in extended tool life and improved surface quality on finishing passes. What does the 0.4 mm nose radius mean for component quality? A 0.4 mm nose radius enables finer surface finish and tighter dimensional control on turned parts; it is suited to finishing operations where form accuracy and appearance are important. Which holder features are required for correct seating? Correct seating requires a holder compatible with ISO 060204 inserts, matched tolerance class and a fixing system that accepts a cylindrical hole with one-sided countersink to ensure repeatable location. Is this insert suitable for internal as well as external turning? Yes, the geometry and chip control make the insert suitable for both external and internal turning when paired with the appropriate external holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GT9530 Wendeplatten - Tungaloy
Data inconsistency detected: the product listing contains contradictory substrate information that prevents a reliable product description. One entry identifies the cutting material as a coated cermet grade (GT9530), while another field names the base material as Hartmetall (carbide). Cermet and carbide are distinct tool substrate families with different mechanical and wear characteristics; they are not interchangeable designations. Before a full, industry-accurate description can be generated, please confirm whether the insert is a coated cermet grade GT9530 or a carbide-based insert, and verify any related fields such as coating, application and geometry. Once the substrate and coating are clarified, a complete EN-GB product text—aligned with ISO geometry, radius, clearance angle and manufacturer data—can be produced for technical and commercial use.
CCMT 060204 GT9530 Wendeplatten - Tungaloy
Take advantage of a wear-resistant, coated cermet grade (GT9530) and the ISO CCMT060204 form for consistent finishing and extended tool life; the rhombic geometry with a corner radius of 0.4 mm provides fine surface quality while the standardised form ensures straightforward holder compatibility. Order directly via Metav Werkzeuge or consult our technical team for application-specific advice. CCMT 060204 GT9530 – Indexable turning insert (coated cermet) by Tungaloy, 80° included angle CCMT060204 GT9530 is an ISO indexable turning insert designed for finishing and light universal turning of steel, offering a stable cutting edge and enhanced surface quality. ISO CCMT 06 size, rhombic form Coated cermet grade GT9530 Single-sided chipbreaker for finishing 7° clearance, 80° included angle Higher surface quality with longer tool life The coated cermet composition GT9530 combines the abrasion resistance of cermet coatings with a formulation optimised for finishing. This results in longer tool life and consistently improved surface finishes when machining steel under stable conditions. The small corner radius 0.4 mm reduces cutting forces and helps achieve fine part aesthetics while still allowing for light stock removal. For production environments where repeatable part quality and reduced rework are priorities, this insert provides a clear efficiency advantage through fewer tool changes and more predictable wear behaviour. Standardised form for reliable holder compatibility As an ISO-designated CCMT insert, the geometry follows established standards to ensure compatibility with a wide range of external holders and boring bars. The ISO CCMT060204 designation describes the rhombic shape and size, while the 2.38 mm thickness and the cylindrical hole with single-sided countersink (40°–60°) determine the correct clamping interface. Matching the insert to a holder requires checking form, clearance angle, tolerance class, fastening method, size and thickness; once these are aligned, the insert delivers repeatable positioning and stable cutting performance, reducing setup time and the risk of incorrect mounting. Application guidance and process benefits This insert is intended for turning operations where a combination of superior surface finish and competitive tool life is required. The single-sided chipbreaker is optimised for finishing to light universal turning in steel, promoting controlled chip formation when the machining setup is rigid and cutting parameters are consistent. Selecting this grade supports higher first-pass quality, which in turn lowers downstream polishing or grinding needs. For flexible production runs, pairing the insert with a suitably rigid holder and consistent clamping practice yields dependable results and helps maintain cycle-time stability. For advice on selecting the correct insert grade or verifying compatibility with specific holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; our technical consultants will assess the application and recommend the optimal solution. Technical data Article number: 6998293 SKU: 6998293-Tungaloy Manufacturer SKU: TUN6998293 Model series: ISO turning indexable inserts Core specifications ISO designation: CCMT060204 Corner radius: 0.4 mm Included angle: 80° Clearance angle: 7° Thickness: 2.38 mm Size: 06 Special features Coated cermet grade GT9530 Rhombic insert form, with hole Cylindrical hole + single-sided countersink (40°–60°) Single-sided chipbreaker, finishing to light universal turning Intended application: turning of steel under stable machining conditions FAQ Which materials is this insert suited for? The CCMT060204 GT9530 insert from Tungaloy is optimised for machining steel, offering wear-resistant performance for finishing and light universal turning tasks. What is the effect of the 0.4 mm corner radius? A corner radius of 0.4 mm reduces cutting forces and supports finer surface finishes; the CCMT060204 geometry with this radius is suitable for delicate finishing passes and reduced risk of chatter when held in a rigid setup. How is the insert clamped in the holder? The insert features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping; correct holder selection requires matching form, size and thickness to ensure stable positioning of the CCMT060204 GT9530 insert. Is GT9530 a good choice for longer runs? Yes; the coated cermet GT9530 provides improved wear resistance and a stable cutting edge, contributing to extended tool life in repeatable, stable machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GT9530 Wendeplatten - Tungaloy
Benefit from the combination of the wear‑resistant GT9530 cermet grade and the ISO‑standard CCMT060204 format for stable finishing and extended tool life; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. CCMT 060204 GT9530 — Tungaloy indexable turning insert for finishing The CCMT 060204 GT9530 is an ISO‑standard rhombic indexable insert for finishing and light general turning, optimised for steel applications where surface quality and tool life under stable conditions are priorities. Coated cermet grade GT9530 for long tool life ISO CCMT 060204 rhombic insert, 7° clearance 0.4 mm nose radius for fine finishing Cylindrical hole with one‑sided countersink Consistent finishing and longer service intervals The coated cermet GT9530 provides a wear‑resistant cutting edge that improves surface finish and extends tool life compared with uncoated grades. As a cemented carbide insert designed for finishing, the combination of a refined micrograin substrate and the GT9530 coating reduces flank wear and thermal softening during steady‑state cuts. The small 0.4 mm nose radius helps achieve precise edge definition for fine external and internal turning, while the rhombic geometry ensures predictable contact with the workpiece and a clean parting line on finished components. Precise system fit and reliable mounting This ISO insert follows the CCMT060204 designation and is intended for use in compatible holders and boring bars. Compatibility depends on matching the insert form, clearance angle 7°, tolerance class, fixing method, size and thickness; correct matching secures repeatable seating and vibration‑free machining. The standardised form permits straightforward replacement and indexation, and the insert’s cylindrical hole with one‑sided countersink (40°–60°) supports positive clamping in many toolholder designs. Understanding these parameters simplifies tool selection and minimises downtime during changeover. Application guidance and recommended use Designed primarily for turning of steel in finishing to light universal operations, the single‑sided chipbreaker and cermet grade perform best in stable setups with good rigidity. The single‑sided chipbreaker assists chip control during continuous cuts; however, chipbreaker choice should match the workpiece material and cutting depth. For best results, moderate cutting speeds and conservative feeds are advised when first introducing a cermet grade, then optimisation can follow based on observed wear and surface finish. This approach secures productivity gains while protecting component quality. Contact Metav Werkzeuge for product availability and tailored application advice for the Tungaloy CCMT060204 GT9530 indexable insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998285 Manufacturer SKU: TUN6998285 Stock SKU: 6998285-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Cemented carbide Core specifications ISO designation: 060204 Size: 06 Thickness: 2.38 mm Nose radius: 0.4 mm Clearance angle: 7° Included angle: 80° Features and compatibility Grade/coating: GT9530 (coated cermet) Chipbreaker: single‑sided Plate form: rhombic Hole style: cylindrical hole with one‑sided countersink (40°–60°) Application: turning (external and internal) System notes: compatibility determined by form, clearance angle, tolerance class, fixing, size and thickness FAQ What materials is this insert suitable for? The CCMT060204 GT9530 insert is formulated as a wear‑resistant cermet grade primarily for steel, offering superior surface quality in finishing and light universal turning. What are the key dimensions and geometry of the insert? The CCMT060204 GT9530 is a size 06 rhombic insert with 0.4 mm nose radius, 2.38 mm thickness, a 7° clearance angle and an 80° included angle (ISO 060204). How is holder compatibility determined? Compatibility for the CCMT060204 format depends on matching the insert form, clearance angle, tolerance class, fixing method, size and thickness to the toolholder’s seat and clamping system. Which chipbreaker and cutting style suit this insert? This Tungaloy insert is supplied with a single‑sided chipbreaker, favouring continuous finishing cuts and stable turning operations where controlled chip flow and surface finish are required. How should cutting parameters be approached with a cermet grade? When introducing the GT9530 cermet grade, begin with moderate speeds and feeds in a rigid setup to assess wear and finish; adjust parameters incrementally to exploit the insert’s longer life while maintaining component quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 060204 GT9530 Wendeplatten - Tungaloy
Take advantage of the combination of consistent finishing performance, extended tool life from the GT9530 coating and secure ISO compatibility for reliable turning operations; order directly via Metav Werkzeuge or consult with the technical team for selection and clamping advice. CCMT060204 GT9530 indexable turning insert — rhombic ISO insert for turning by Tungaloy CCMT060204 GT9530 is an ISO rhombic indexable insert for turning, designed for finishing and light universal machining of steel under stable conditions ISO rhombic 80° geometry Coated cermet GT9530 grade Single-sided chipbreaker for fine finishes Cylindrical hole with 40°–60° countersink High-performance finishing with measurable gains The coated cermet GT9530 composition emphasises surface quality and wear resistance, making the insert particularly suited to finishing operations on steel. The combination of a fine-grain coating and a controlled cutting edge yields longer tool life under steady machining conditions and reduces the need for frequent index changes. That translates into higher uptime on production lathes and a more predictable production flow for batch or serial turning work. Secure compatibility and clamping for productivity The ISO format ensures compatibility with a wide range of external holders and boring bars when the form, relief angle, tolerance class, clamping method, size and thickness match. The insert’s 80° included angle and the supplied cylindrical hole with a single-sided countersink establish a stable mechanical interface, improving repeatability and torque transmission during cutting. A confident clamping arrangement reduces vibration and supports consistent surface finish and dimensional control in series production. Clear explanation of key geometries and their benefits The 0.4 mm corner radius balances edge strength and the ability to achieve a fine surface finish: a larger radius gives longer edge life, a smaller radius enables finer detail. The 7° relief angle reduces rubbing on the flank and helps maintain surface integrity at higher feed rates; the single-sided chipbreaker manages chip flow for finishing cuts, avoiding built-up edge and improving surface consistency. These parameters together define the insert’s behaviour in practical machining and help planners select the correct grade for their process. Recommended applications and process notes Designed for turning, the insert is best used where a high-quality finish on steel is required and where stable fixturing is available. The CCMT060204 geometry suits both external and internal turning with a focus on smooth finishes rather than heavy stock removal. For light universal machining or final passes the GT9530 grade delivers a favourable compromise between surface quality and tool life. For specific cycle optimisation or material mixes, Metav Werkzeuge consultants can advise on feeds, speeds and holder selection to match shop conditions. Contact Metav Werkzeuge for tailored application advice, compatibility checks and ordering information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our technical consultants will help specify the correct insert and holder combination for the intended turning task Technical data Article number: 6998298 Manufacturer SKU: TUN6998298 Stock SKU: 6998298-Tungaloy Brand: Tungaloy Model designation: CCMT060204 GT9530 Category: ISO turning indexable inserts Facts Insert thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 80° Size: 06 ISO code: 060204 Special features Coated cermet grade GT9530 Single-sided chipbreaker Rhombic insert shape Cylindrical hole with 40°–60° countersink With hole (for central clamping) Application: Turning Typical use: finishing to light universal for steel FAQ What steels is this insert suitable for? The CCMT060204 GT9530 insert from Tungaloy is formulated for steels, offering good surface finish and longer tool life under stable turning conditions. How does the GT9530 grade differ from conventional grades? GT9530 is a coated cermet designed for wear resistance and surface quality; the coating and substrate combination provides extended life in finishing operations compared with standard uncoated inserts. Can this insert be clamped in standard CCMT holders? The insert follows ISO CCMT dimensions; compatibility depends on matching form, relief angle, tolerance class, clamping method, size and thickness to the holder specifications. What effect does the 0.4 mm corner radius have on machining? A 0.4 mm radius offers a compromise between edge strength and fine surface finish, supporting consistent finishes on finishing passes with reduced risk of edge chipping. Is the CCMT060204 GT9530 suitable for internal and external turning? Yes — the rhombic CCMT060204 geometry is suitable for both external and internal turning, primarily aimed at finishing and light universal operations on steel. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com