Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT 120412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide durability and a robust rhombic geometry for consistent mid‑steel turning. The insert delivers reliable edge strength and high productivity in continuous to light interrupted cuts — order the CCMT 120412 T9215 insert directly via Metav Werkzeuge or consult the sales team for application advice. CCMT 120412 T9215 turning insert by Tungaloy — ISO rhombic insert for turning The CCMT120412 T9215 is an ISO‑indexable rhombic turning insert designed for external and internal turning, offering a CVD‑coated carbide grade optimised for mid‑range steel machining. CVD‑coated grade T9215 for mid‑range steel ISO rhombic form CCMT 80° included angle 1.2 mm corner radius for robust edge strength Cylindrical hole with single‑side countersink 40°–60° Increased tool life and consistent wear resistance for production shifts The CVD‑coated carbide in grade T9215 is formulated to combine high wear resistance with good fracture toughness, translating into longer tool life and fewer insert changes during production. The CVD coating provides a hard, wear‑resistant outer layer while the carbide substrate maintains toughness; this balance is particularly beneficial when machining medium‑hard steels under continuous and light interrupted cuts. For operations seeking stable cycle times and predictable consumable behaviour, the combination of coating and substrate reduces flank wear and helps maintain component tolerances over longer intervals. Secure geometry and straightforward holder compatibility reduce downtime As an ISO‑indexable turning insert, the component uses standard geometric parameters to ensure predictable seating and clamping. The rhombic 80° included angle and the 1.2 mm corner radius provide a compromise between edge strength and dimensional control, suitable for finishing and general turning tasks. Compatibility with a toolholder depends on form, clearance angle (7°), tolerance class, fixing method, size (12) and thickness (4.76 mm); these parameters ensure correct seating and minimise vibration. The insert’s cylindrical hole with a 40°–60° single‑side countersink enables standard screw clamping with a shim or clamping set, simplifying replacement and reducing fixture‑related downtime. Application guidance: select chipbreaker and holder for best results This grade and geometry perform best when the chipbreaker and holder stability match the workpiece material and cutting conditions. The single‑sided chipbreaker supplied is intended for predictable chip formation in steel; for heavily interrupted cuts or unstable set‑ups, a different chip control geometry or a more robust clamping arrangement should be chosen. The system is built around the indexable plate, a compatible external holder or boring bar, a shim/clamping set and the appropriate screw; keeping spare screws and shims on hand supports quick changeovers. Practical selection — matching grade T9215, the chipbreaker style and the holder rigidity — delivers improved surface finish, reduced rework and higher overall productivity. For availability and tailored machining advice on the CCMT 120412 T9215 Tungaloy insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — application consultancy and supply are available from Metav Werkzeuge Technical Data Manufacturer article number: 6773968 SKU: 6773968-Tungaloy Manufacturer SKU: TUN6773968 Model series: ISO‑indexable turning inserts Material: carbide Type designation: CCMT120412 T9215 Facts Included angle: 80° Clearance angle: 7° Corner radius: 1.2 mm Plate thickness: 4.76 mm Plate size: 12 Special features CVD‑coated carbide grade T9215 Single‑sided chipbreaker Rhombic insert form CCMT (ISO 120412) Cylindrical hole with single‑side countersink 40°–60° Suitable for external and internal turning of mid‑range steel System components: insert, external holder or boring bar, shim/clamping set, spare screws FAQ What materials is the CCMT 120412 T9215 best suited for? The Tungaloy CCMT 120412 T9215 is optimised for mid‑range steel machining and performs well in continuous to light interrupted cuts; select the chipbreaker and holder according to workpiece stability. How is compatibility with a toolholder determined? Compatibility is defined by form, clearance angle (7°), tolerance class, fixing method, size (12) and thickness (4.76 mm); verify these parameters on the holder drawing before fitting the insert CCMT120412. What advantages does the T9215 coating provide? Grade T9215 is a CVD‑coated carbide developed for a balance of wear resistance and fracture toughness, resulting in extended tool life and reliable performance during production runs. Can this insert be used for internal turning? Yes, the CCMT120412 insert is suitable for both external and internal turning when combined with an appropriate boring bar and the correct chipbreaker for the application. What is the hole and clamping style of the insert? The insert features a cylindrical hole with a single‑side countersink (40°–60°) for standard screw clamping together with a shim or clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CCMT 120412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated T9215 carbide for high wear resistance and a 1.2 mm corner radius for consistent component profiles to keep production steady and predictable. The insert's ISO CCMT geometry and single-sided chipbreaker enable controlled chips and reliable performance in mid-range steel turning. Order the CCMT120412 directly via Metav Werkzeuge or ask our consultants for tailored advice. CCMT 120412 T9215 turning insert — Tungaloy — CVD-coated carbide, 1.2 mm radius CCMT120412 T9215 Tungaloy-Wendeplatte is an ISO-indexed turning insert designed for external and internal turning of steel, offering stable chip control and durable performance for continuous to lightly interrupted cuts CVD-coated T9215 grade for steel machining 1.2 mm corner radius for consistent profiles Single-sided chipbreaker for controlled chips ISO CCMT rhombic insert, 80° lead angle Boosted productivity through predictable wear resistance The CVD-coated carbide grade T9215 combines elevated wear resistance with good fracture toughness, which translates directly into longer tool life and fewer index changes during production. For shops machining mid-range steel, this means longer uninterrupted runs and reduced tooling logistics. The coated substrate helps maintain cutting-edge integrity under continuous and lightly interrupted cutting, improving process stability and reducing unexpected downtime. Precise part geometry with a 1.2 mm corner radius A 1.2 mm corner radius delivers consistent profile definition without excessive cutting forces, balancing surface finish and tool stress. The rhombic CCMT geometry with an 80° lead angle supports neutral cutting conditions, limiting radial forces and helping to produce accurate external and internal diameters. Where tighter tolerances are required, the insert geometry assists in maintaining repeatability across batches, reducing rework and scrap rates. Reliable chip control and straightforward tool matching The integrated single-sided chipbreaker is configured for effective chip formation during turning of steel grades, improving evacuation in through-turning and facing operations. Compatibility with standard ISO holders is determined by form, clearance angle (7°), tolerance class, fixation and thickness; the insert’s dimensions — 12 mm size and 4.76 mm thickness with a centred hole and cylindrical hole plus one-sided countersink (40°–60°) — facilitate straightforward tool assembly. This simplifies tool changeover and supports consistent machining outcomes. Practical benefits for workshop efficiency Using an ISO-indexed insert reduces inventory complexity: a single CCMT120412 style insert can be deployed across a variety of holders and toolposts when geometry and clamping match, lowering stocking requirements. The combination of a robust carbide substrate and protective coating means fewer tool rotations and predictable intervention intervals, helping to plan maintenance windows and optimise spindle time. The result is a measurable gain in operational throughput with reduced administrative overhead. Contact Metav Werkzeuge today for application-specific recommendations and availability of the CCMT120412 T9215 Tungaloy insert Technical data Article number: 6774051 SKU: 6774051-Tungaloy Manufacturer SKU: TUN6774051 Facts Corner radius: 1.2 mm Clearance angle: 7° Lead / approach angle: 80° Thickness: 4.76 mm Size: 12 Special features ISO designation: CCMT120412 Grade: T9215 Coating/type: CVD-coated carbide Chipbreaker: single-sided Hole: with hole — cylindrical hole + one-side countersink (40°–60°) Shape: rhombic FAQ Is this insert suitable for external and internal turning of steel? Yes. The CCMT120412 T9215 insert from Tungaloy is designed for both external and internal turning and is optimised for mid-range steel machining with reliable chip control. What benefits does the T9215 grade offer? The T9215 CVD-coated carbide grade provides enhanced wear resistance together with good fracture toughness, supporting longer tool life and steady cutting performance in continuous to lightly interrupted operations. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle (7°), tolerance class, fixation, size and thickness; the insert’s ISO CCMT geometry and 12 mm size fit standard CCMT external holders and boring bars designed for CCMT inserts. How does the chipbreaker affect machining? The single-sided chipbreaker on this insert promotes controlled chip formation for common steel turning tasks, aiding chip evacuation and reducing the risk of chip entanglement in through-turning and facing. What is the hole style and why does it matter? The insert has a cylindrical hole with a one-sided countersink (40°–60°), which secures clamping stability and ensures correct seating on the insert seat, contributing to repeatable cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 T9225 Wendeplatten - Tungaloy
Combining the CVD-coated carbide T9225 grade with a 1.2 mm corner radius and a robust rhombic geometry, this insert provides stable chip control and extended tool life for medium-to-heavy steel turning; order via Metav Werkzeuge or consult the team for tailored selection and rapid supply. CCMT120412 120412 T9225 turning insert (Tungaloy) — CVD-coated carbide, 1.2 mm radius CCMT120412 is a standard ISO rhombic turning insert for external and internal turning applications, designed for medium to heavy-duty steel machining. CVD-coated carbide grade T9225 Robust universal grade for steel machining Rhombic CCMT geometry, 80° cutting angle 1.2 mm corner radius, single-sided chipbreaker Consistent cutting performance for demanding turning tasks The combination of CVD-coated surface treatment and a carbide substrate in grade T9225 provides a balance of wear resistance and toughness intended for interrupted cuts and variable engagement. This construction reduces flank wear under higher thermal loads, which translates into more predictable tool life and fewer unplanned tool changes. For operations on medium to heavy steel, the insert’s durability supports longer unmanned runs and higher process reliability without sacrificing dimensional control. Designed for system compatibility and straightforward integration As an ISO-standard insert, the component fits into established tool systems when matched on form, clearance angle, tolerance class, fixation and size. The insert’s rhombic geometry and 80° cutting angle make it suitable for a wide range of turning holders and boring bars; correct pairing with the holder and shim/clamp set ensures clamping stability and repeatable results. The system approach—insert, external holder or boring bar, and replacement screws—simplifies spare-part planning and reduces tooling complexity on the shop floor. Better chip control and surface quality with reduced rework The single-sided chipbreaker is tailored for efficient chip evacuation during medium to heavy cuts, lowering the risk of built-up edge and improving surface finish on ferritic and alloyed steels. Stable chip formation helps to avoid downtime for chip clearing, while the robust grade supports consistent cutting forces, benefiting process repeatability. The net effect is improved productivity and a reduced total cost per part through fewer tool changes and less secondary finishing. Practical mounting details that aid set-up and stability Key design particulars assist setup and machining stability: a plate thickness of 4.76 mm, plate size 12, a 1.2 mm corner radius and a 7° clearance angle are matched to moderate-depth turning operations. The insert features a cylindrical hole with a one-sided countersink (40°–60°) which provides secure positive location in compatible clamping systems. These mechanical attributes make the insert straightforward to seat and align, aiding repeatable clamping and minimising run-out during operations. For supply, technical matching or to discuss recommended grades for specific steel alloys, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance with Tungaloy inserts and rapid delivery through Metav Werkzeuge. Technical data Article number: 6781044 Manufacturer SKU: TUN6781044 SKU: 6781044-Tungaloy Model series: ISO-turning inserts Material: carbide Data Plate size: 12 Plate thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 7° Cutting angle: 80° Special features Grade: T9225 Coating: CVD-coated Plate form: rhombic (CCMT) Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning (steel machining) FAQ What materials is this insert suitable for? The Tungaloy CCMT120412 in grade T9225 is designed primarily for medium to heavy steel machining; the grade and CVD-coated carbide substrate balance wear resistance and toughness for those materials. How does the T9225 coating affect performance? The CVD-coated layer on the T9225 grade improves thermal and abrasive wear resistance, which leads to longer tool life and more consistent surface quality when turning under higher cutting temperatures. Is the CCMT120412 compatible with standard ISO holders? Yes. The insert is an ISO-format rhombic plate and compatibility depends on matching form, clearance angle, tolerance class, fixation method, size and thickness with the chosen holder. Which chipbreaker should be selected for light finishing cuts? For finishing, a finer or negative chip control geometry is generally recommended; the CCMT120412 here features a single-sided chipbreaker suited to medium-to-heavy cuts—select a chipformer appropriate to the intended finish and feed rates. What mounting details should be checked before first use? Confirm plate seating on the shim, secure fastening with the correct screw and check the cylindrical hole with one-sided countersink aligns with the clamp. Also verify the holder matches the 12 size and 4.76 mm thickness to ensure stable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 120412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade and a 1.2 mm corner radius for reliable, heavy-duty steel turning; this reduces tool changes and supports consistent surface finish. Order the insert directly via Metav Werkzeuge or ask our consultants for fitting and application advice. CCMT 120412 T9225 turning insert (CCMT120412, Tungaloy) — ISO rhombic insert for medium to heavy steel turning CCMT120412 T9225 is an ISO-standard rhombic turning insert designed as a robust universal grade for demanding steel turning applications CVD-coated carbide for durable performance Universal grade for medium to heavy steel Rhombic CCMT form with cylindrical hole + countersink 1.2 mm corner radius for strength and stability Reliable cutting performance under variable conditions The T9225 grade combines a CVD-coated carbide substrate with a formulation tuned for toughness, making it suitable for medium to heavy steel turning where varying engagement or intermittent cuts occur. The tougher grade reduces the risk of chipping during interrupted cuts and supports longer edge life, which in turn decreases unplanned tool changes and downtime. The included chipbreaker geometry is chosen to match stability and the required surface finish, so selecting the correct chip control variant ensures repeatable results and enhanced process efficiency. Seamless integration into ISO turning systems Designed to the ISO designation, the insert fits standard holders when form, 7° clearance angle, tolerance class, clamping method, size and thickness are matched. The CCMT form and cylindrical hole + countersink (40°–60°) allow secure clamping with common outer holders or boring bars, while the 4.76 mm thickness provides a stable support plane under load. These dimensional standards simplify toolroom logistics and make replacement straightforward, reducing set-up time and ensuring the insert runs true in appropriately specified tooling systems. Higher productivity with predictable maintenance cycles A 1.2 mm corner radius offers a balanced compromise between strength and edge definition, supporting deeper cuts with improved vibration resistance and consistent surface quality. Using the insert as part of a complete system — insert, compatible holder, shim/clamping set and spare screws — promotes predictable maintenance intervals and eases inventory management. The robust universal composition of the grade means fewer insert variants are required across a range of steel components, which optimises stockholding and boosts overall production throughput. For reliable, productive turning with Tungaloy’s CVD-coated T9225 grade, contact Metav Werkzeuge for tailored advice and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781315 SKU: 6781315-Tungaloy Manufacturer SKU: TUN6781315 Core specifications Insert designation: CCMT120412 Thickness: 4.76 mm Insert size: 12 mm Approach angle: 80° Clearance angle: 7° Corner radius: 1.2 mm Features Material: carbide Coating / grade: T9225 (CVD-coated) Shape: rhombic (CCMT) Hole: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning FAQ What materials is this insert designed for? The CCMT120412 T9225 turning insert is formulated for steel, particularly medium to heavy steel turning where toughness and stable chip control are required. Will this insert fit standard CCMT holders? Yes — the insert follows ISO dimensions; compatibility depends on matching form, 7° clearance angle, thickness (4.76 mm) and clamping style to the holder. Which cutting conditions suit the T9225 grade best? T9225 is optimised for variable engagement and lightly interrupted cuts in steel, offering good edge strength and consistent tool life under mixed conditions. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius improves edge robustness and vibration resistance, enabling deeper cuts and more stable finishing while balancing surface quality and tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CCMT 160508 UR 4335 Indexable Insert - Sandvik
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product specifications indexable inserts CCMT 160508 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT160508UR4335-SANDVIK Figures for the tool: ISO-Code: CCMT160508 Clearance Angle: 7° Thickness: 5,56mm Radius: 0.8 Features Material: cemented carbide Grade: 4335 Chip Breaker: UR with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the Sandvik brand. 40START indexable-inserts-CCMT-160508-4335-Sandvik 40END
CCMT 380932 4325 Indexable Insert - Sandvik
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product specifications indexable inserts CCMT 380932 from Sandvik Brand: Sandvik Manufacturer Order Number: CCMT380932XH4325-SANDVIK Facts and Figures: ISO-Code: CCMT380932 Clearance Angle: 7° Thickness: 9,52mm Radius: 3.2 Features Material: cemented carbide Grade: 4325 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Sandvik brand. 40START indexable-inserts-CCMT-380932-4325-Sandvik 40END
CCMT CERMET 060204 Indexable Insert for Stahl, rostfreier Stahl, Guss - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Information on technical features indexable inserts CCMT CERMET 060204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT060204-FG-CERMET Figures for the tool: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Features Material: CERMET with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT CERMET-060204-Stahl, rostfreier Stahl, Guss-MetavCUT 40END
CCMT CERMET 060204 Indexable Insert for Stahl, rostfreier Stahl, Guss - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts CCMT CERMET 060204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT060204-MT-CERMET Facts and Figures: ISO-Code: CCMT060204 Clearance Angle: 7° Angle: 80° Thickness: 2,38mm Special features Material: CERMET with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT CERMET-060204-Stahl, rostfreier Stahl, Guss-MetavCUT 40END
CCMT CERMET 09T304 Indexable Insert for Stahl, rostfreier Stahl, Guss - MetavCUT
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Performance features for indexable inserts CCMT CERMET 09T304 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT09T304-FG-CERMET Facts for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Features Material: CERMET with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT CERMET-09T304-Stahl, rostfreier Stahl, Guss-MetavCUT 40END
CCMT CERMET 09T304 Indexable Insert for Stahl, rostfreier Stahl, Guss - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications for CCMT CERMET 09T304 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT09T304-MT-CERMET Facts for the tool: ISO-Code: CCMT09T304 Clearance Angle: 7° Angle: 80° Thickness: 3,97mm Features Material: CERMET with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT CERMET-09T304-Stahl, rostfreier Stahl, Guss-MetavCUT 40END
CCMT CERMET 09T308 Indexable Insert for Stahl, rostfreier Stahl, Guss - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for CCMT CERMET 09T308 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT09T308-MT-CERMET ISO-Code: CCMT09T308 Material: CERMET Form: rhombic Usable to the work on: Stahl, rostfreier Stahl, Guss Clearance Angle: 7° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 3,97mm Chip Breaker: single-sided Angle: 80° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT CERMET-09T308-Stahl, rostfreier Stahl, Guss-MetavCUT 40END
CCMT CERMET 120404 Indexable Insert for Stahl, rostfreier Stahl, Guss - MetavCUT
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for CCMT CERMET 120404 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT120404-MT-CERMET Dataand Figures: ISO-Code: CCMT120404 Clearance Angle: 7° Angle: 80° Thickness: 4,76mm Special features Material: CERMET with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT CERMET-120404-Stahl, rostfreier Stahl, Guss-MetavCUT 40END
CCMT060202-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Benefit from the long-lasting Tiger‑tec Gold coating and the balanced WPP20G grade for dependable steel machining; the compact 0.2 mm corner radius and 80° rhombic geometry deliver stable chip control and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our advisors for cutting data and holder compatibility. CCMT060202-E47 WPP20G drilling/reaming indexable insert for steel — Walter Tools CCMT060202-E47 WPP20G is a drilling and bore‑enlarging indexable insert designed for efficient holemaking in a wide range of steels Tiger‑tec Gold coating for long life Optimised for steel ISO P applications 80° rhombic shape for flexible indexing 0.2 mm corner radius for precise cutting Optimised coating and grade for reliable productivity The combination of the Tiger‑tec Gold technology and the WPP20G grade creates a balanced, coated‑carbide solution tailored to the thermal loads and chip forms typical of steel machining. This coating strategy enhances wear resistance, reduces flank wear progression and ensures a predictable tool life. The integrated chipbreaker E47 supports continuous chip control during hole enlargement, reducing the risk of clogging and enabling stable feeds and spindle speeds. For production environments seeking repeatable cycle times, these properties translate directly into lower tooling costs per part and fewer unscheduled tool changes. Geometry that improves hole quality and process stability The 80° rhombic plate form and a 0.2 mm corner radius provide a geometry that resists edge chipping while delivering a consistent cutting line on bore walls. The 7° clearance angle reduces rubbing and heat at the cutting edge, improving surface finish and dimensional consistency in consecutive holes. These features support both semi‑finishing and finishing passes, where geometric stability is essential to meet tolerance and roundness requirements. Explained simply: smaller corner radii give sharper engagement for accuracy, while the rhombic shape allows multiple effective index positions to extend insert life. Predictable integration into existing tool systems With a standard designation of CCMT060202‑E47, this insert matches common mounting and clamping systems used in drilling and reaming toolholders. The tolerance class M ensures consistent interchangeability between inserts, reducing setup time and minimising the need for special adjustments. As a coated cemented‑carbide grade, it fits routine workshop processes without requiring unusual coolant strategies; conventional flood or through‑tool coolant practices remain effective. The net effect is straightforward: faster tool changes, stable process parameters and improved overall equipment effectiveness. Broad suitability for steel applications and recommended uses The material code indicates primary suitability for steel (ISO group P). The WPP20G grade is positioned as a universal solution that balances resistance to abrasive wear with adequate toughness for a range of steel grades, from softer low‑alloy steels to tougher, more work‑hardening materials. Use this insert for hole enlargement, spot boring and other holemaking operations where a combination of chip control and edge stability matters. When selecting feeds and speeds, prioritise consistent chip evacuation and modest depth per pass to exploit the insert’s balanced performance. Contact Metav Werkzeuge for application‑specific cutting data, holder compatibility and immediate availability of the Walter Tools CCMT060202-E47 WPP20G insert for steel machining Technical Data Article number: CCMT060202-E47-WPP20G-WALTER Name: Bohr-/Aufbohrwendeschneidplatte CCMT060202-E47 WPP20G Manufacturer: Walter Tools Product type: drilling/reaming indexable insert Facts Free angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WPP20G Chipbreaker: E47 Material application: steel (ISO P) Coated carbide construction FAQ Is this insert suitable for all steel grades? The CCMT060202‑E47 WPP20G insert is formulated for steel (ISO P) and offers a universal balance of wear resistance and toughness, making it suitable for a wide range of common steel grades. How does the Tiger‑tec Gold series affect tool life? The Tiger‑tec Gold coating enhances wear resistance and thermal stability on the cutting edge, which extends the service life of the insert under typical steel machining conditions. Can the insert be indexed multiple times for extended life? Yes, the 80° rhombic shape provides several index positions, allowing repeated use of fresh cutting edges and improving overall productivity. What does the chipbreaker E47 provide in holemaking? The E47 chipbreaker is designed to promote stable chip formation and evacuation during bore enlargement, reducing the risk of clogging and improving surface finish in the hole. Does tolerance class M impact interchangeability? Tolerance class M indicates a medium tolerance level that supports consistent fit and interchangeability across standard toolholders without custom adaptation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060202-E47 WPP20S WPP20S Wendeplatten - Walter Tools
The combination of a Tiger·tec Silver coated carbide grade and a compact Rhombic 80° geometry delivers reliable chip control and extended tool life in steel machining; expect consistent results and efficient tool changeover. Order the CCMT060202-E47 WPP20S insert directly via Metav Werkzeuge or contact the consultancy team for cutting data and availability. CCMT060202-E47 WPP20S Drill/Bore Indexable Insert, coated carbide for steel – Walter Tools The CCMT060202-E47 WPP20S is a coated carbide indexable insert for drilling and boring applications, optimised for machining steels according to ISO group P. Tiger·tec Silver coated carbide Optimised for steel machining 0.2 mm corner radius for accuracy Rhombic 80° form with 7° clearance Durable coated grade for demanding steel operations The insert features the Tiger·tec Silver coating on a wear-resistant carbide substrate, designed to improve tool life and stability under the thermal and mechanical loads typical when cutting steel. The coating technology aids in stable chip formation and reduces flank wear, which translates into fewer tool changes and longer uninterrupted production runs. Engineers and production planners will value the predictable performance under continuous operation, while workshop supervisors benefit from lower tool consumption and more consistent component quality. Geometry that promotes secure cutting and chip control The Rhombic 80° shape combined with a 0.2 mm corner radius and 7° clearance angle gives a balance between entry strength and cutting-edge adaptability. The E47 chipbreaker is tuned for effective chip segmentation in steel, improving evacuation during both drilling and bore-enlargement passes. These geometric choices reduce the risk of built-up edge and support repeatable surface finish, making the insert suitable for a range of machining tasks where reliable chip control and repeatability are required. Practical advantages in production environments As a member of the Tiger·tec Silver series and the WPP20S grade, this insert is intended for universal steel applications and supports productive machining strategies. The compact size and standard CCMT designation simplify inventory and toolholder selection, while the coated grade helps maintain cutting-edge integrity at higher cutting speeds. For job shops and production lines alike, the result is improved throughput and more consistent part-to-part quality, enabling efficient process planning and reduced secondary operations. Contact Metav Werkzeuge today for tailored cutting data, stock information and expert recommendations on the Walter Tools CCMT060202-E47 WPP20S insert Technical Data Article number: CCMT060202-E47-WPP20S-WALTER Designation: CCMT060202-E47 WPP20S Label: Bohr-/Aufbohrwendeschneidplatte CCMT060202-E47 WPP20S Walter Tools Manufacturer: Walter Tools Core Data Free angle: 7° Corner radius: 0.2 mm Plate form: Rhombic 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WPP20S (coated carbide) Chipbreaker: E47 Material group suitability: Steel (ISO group P) Execution: T FAQ Which materials is this insert intended for? The CCMT060202-E47 WPP20S insert is designed primarily for steel machining (ISO group P) and its grade and chipbreaker are matched to the cutting behaviour of unalloyed and alloyed steels. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on this Walter Tools insert improves wear resistance and thermal stability, resulting in longer tool life and more consistent cutting performance under steel machining conditions. How does the 80° rhombic form affect machining? The Rhombic 80° geometry offers a robust cutting edge for drilling and boring tasks, allowing secure insert seating and good access to bore walls while maintaining cutting stability. Is the E47 chipbreaker suitable for finishing passes? The E47 chipbreaker is engineered for effective chip control in steel; it supports stable machining and can deliver consistent surface quality, depending on cutting parameters and machine rigidity. Which operations and machines are best suited to this insert? This indexable insert is suitable for drilling and bore-enlargement operations on machining centres and dedicated drilling/boring units where the cutter geometry and grade match the machine’s rigidity and the workpiece material. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners and are mentioned here for clarification only; there is no affiliation between our company and the trademark owners.
CCMT060202-E47 WSM20S T Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating with the WSM20S grade, this insert delivers stable cutting edges and controlled chip formation for machining stainless steel and high‑temperature alloys; the 7° clearance and 0.2 mm nose radius contribute to consistent surface quality and reproducible tool life. Order the Walter Tools insert directly via Metav Werkzeuge or consult our specialists for cutting data and application matching. CCMT060202-E47 WSM20S Rhombic 80° indexable insert for stainless steel and superalloys — Walter Tools The CCMT060202-E47 WSM20S is a rhombic 80° turning and boring indexable insert designed for demanding operations on stainless steel and heat‑resistant superalloys, offering a combination of coating, edge geometry and chip control for reliable production runs. Tiger‑tec Silver coated carbide grade WSM20S Rhombic 80° geometry for stable cutting 7° clearance angle for reduced rubbing 0.2 mm nose radius for consistent surface finish Stable edge performance for tough-to-cut alloys The combination of the Tiger‑tec Silver coating and the WSM20S carbide grade is optimised for materials that generate heat and strain the cutting edge. For stainless steel and nickel‑base superalloys, the coating improves thermal resistance while the grade promotes stable chip formation, reducing the risk of built‑up edge and premature wear. In production contexts this translates into longer tool life and fewer interruptions for tool changes, supporting higher overall equipment effectiveness and predictable cycle times. Geometry engineered for repeatable surface quality The rhombic 80° form factor and a 0.2 mm nose radius balance robustness and finish capability. The smaller nose radius helps to maintain dimensional control on fine turning passes, while the insert shape provides a secure seating and chip flow path in compatible toolholders. Paired with the E47 chipbreaker, this geometry enables consistent chip segmentation and evacuation, which lowers rework rates and simplifies downstream handling of swarf in automated setups. Coating and material pairing to increase productivity A coated cemented carbide base benefits operations on materials with poor thermal conductivity by protecting the cutting edge against high temperatures and adhesive wear. The WSM20S grade within the Tiger‑tec Silver family has been selected for its heat resistance and edge integrity, supporting tougher machining parameters when compared with uncoated grades. The result is improved process security and the opportunity to raise cutting data where machine and setup permit, yielding measurable productivity gains per shift. Integration and process advice for machining shops This indexable insert suits medium to advanced turning and boring applications where reproducibility is required. The insert’s 7° clearance angle reduces flank rubbing and helps preserve surface integrity on interrupted cuts. In application planning, match the insert to a suitable toolholder for rhombic 80° plates and verify clamping stability; modest increases in feed or depth-of-cut are often possible once initial trials confirm thermal and vibration behaviour. For controlled series production the insert supports consistent quality with fewer tool swaps, enhancing throughput and reducing process variability. Contact Metav Werkzeuge for tailored cutting data and to discuss how Walter Tools CCMT060202-E47 WSM20S inserts can be integrated into existing toolchains; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT060202-E47-WSM20S-WALTER SKU: CCMT060202-E47-WSM20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte CCMT060202-E47 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade / Sort: WSM20S Key dimensions Clearance angle: 7° Nose radius: 0.2 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Special features and suitability Chipbreaker: E47 Coating technology: Tiger‑tec Silver Material suitability: S / M (superalloys and stainless steel) Execution: T Tolerance class: M Intended use: Turning / boring indexable insert FAQ Which materials are recommended for this insert? The CCMT060202-E47 WSM20S insert from Walter Tools is recommended for stainless steel and heat‑resistant superalloys (ISO groups M and S), with the grade engineered to support secure chip formation and thermal stability. What are the key geometric specifications to consider? The insert features a rhombic 80° shape, a 7° clearance angle and a 0.2 mm nose radius; these dimensions influence seat selection, surface finish and allowable feed ranges for turning and boring operations. How does the Tiger‑tec Silver coating improve performance? Tiger‑tec Silver coating enhances thermal resistance and wear protection on the carbide substrate, enabling more consistent tool life when machining materials that generate high cutting temperatures. Is the CCMT060202-E47 suitable for interrupted cuts? Yes, the rhombic 80° geometry and the robustness of the WSM20S grade make the insert suitable for many interrupted cutting scenarios, provided the toolholder and clamping are sufficiently rigid. What chip control can be expected with E47 chipbreaker? The E47 chipbreaker is designed for segmented chip formation in medium to heavy feeds, assisting evacuation and reducing the risk of long, stringy chips during turning of stainless steel and superalloys. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Tel: not specified Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060202-E47 WSM30S WSM30S Wendeplatten - Walter Tools
The Tiger·tec Silver coating combined with the WSM30S grade delivers thermal resilience and stable cutting edges for machining rostfreier Stahl and heat-resistant alloys; the CCMT rhombic form with a 7° clearance and 0.2 mm corner radius supports consistent surface quality and predictable tool life. Order the insert via Metav Werkzeuge or consult the technical team for process optimisation. CCMT060202-E47 WSM30S — drilling/bore-up indexable insert, Tiger·tec Silver (Walter Tools) The CCMT060202-E47 WSM30S is a rhombic 80° indexable insert optimised for demanding drilling and bore-enlargement applications, especially when machining rostfreier Stahl and high-temperature superalloys. Tiger·tec Silver coating for thermal resistance WSM30S grade for rostfreier Stahl and superalloys Rhombic 80° CCMT form for versatile indexing 7° clearance and 0.2 mm corner radius Consistent cutting performance under heat and strain The combination of the Tiger·tec Silver coating and the WSM30S carbide grade is engineered to resist the thermal loads typical of machining rostfreier Stahl and group S alloys. The coating reduces adhesion and improves heat dissipation at the cutting edge, which in turn supports a stable cutting edge and extended tool life. For production environments this means fewer interruptions and more predictable cycle times; the result is a measurable improvement in process reliability without compromising component integrity. Reliable chip control and surface integrity The E47 chipbreaker is designed to produce short, controllable chips during interrupted cuts and deep bore passes, reducing the risk of chip entanglement and tool damage. Combined with the CCMT rhombic 80° form and a 0.2 mm corner radius, the geometry promotes a balanced distribution of cutting forces and a fine surface finish. The 7° clearance minimises rubbing and heat build-up behind the cutting edge, translating into reduced vibration and improved dimensional consistency for each operation. Practical benefits for workshop and production use As an indexable insert, this grade and geometry allow rapid re-indexing and straightforward inventory management: one body can provide multiple fresh cutting edges, cutting downtime and maintenance effort. The insert size (06) and thickness (02) suit a wide range of toolholders compatible with Walter Tools systems, enabling a smooth transition into existing tool sets. For specific machining strategies or mixed-material production, Metav Werkzeuge’s technical advisors can support selection of cutting parameters and holder compatibility to achieve optimal outcomes. For further technical data or process support, contact info@metav-werkzeuge.com or call +49 2822 7131930. For applications in rostfreier Stahl and high-temperature alloys, request Walter Tools’ Tiger·tec Silver WSM30S from Metav Werkzeuge for proven process security — contact Metav Werkzeuge for tailored advice and availability. Technical data SKU: CCMT060202-E47-WSM30S-WALTER Article designation: CCMT060202-E47 WSM30S Product type: drilling/bore-up indexable insert Brand: Walter Tools Facts Insert form: Rhombus 80° (CCMT) Clearance angle: 7° Corner radius: 0.2 mm Insert size: 06 Thickness: 02 Special features Coating: Tiger·tec Silver Grade: WSM30S (coated carbide) Chipbreaker: E47 Material application: rostfreier Stahl and heat-resistant superalloys (group S) Series: Tiger‑tec Silver FAQ Which materials is this insert suitable for? The insert is intended for machining rostfreier Stahl and heat-resistant superalloys; the WSM30S grade is optimised for such demanding materials. What benefit does the Tiger·tec Silver coating provide? Tiger·tec Silver enhances thermal resistance and reduces adhesion at the cutting edge, improving the WSM30S insert’s wear behaviour under high temperatures. How does the E47 chipbreaker affect machining? The E47 chipbreaker promotes short, controllable chips for safer bore passes and interrupted cuts, helping to protect the tool and workpiece. Is the CCMT form compatible with standard toolholders? The CCMT rhombic 80° geometry is a common indexable form; the CCMT060202-E47 WSM30S insert fits holders designed for CCMT inserts of the corresponding size. What performance improvements can be expected in production? Users can expect improved process stability, longer edge life and more consistent surface quality when using the WSM30S grade with appropriate parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060202-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WMP20G carbide grade for stable, long-lasting performance when machining rostfreier Stahl; the FM4 chipbreaker and a 0.2 mm nose radius support consistent surface quality and predictable chip formation. Order the CCMT060202-FM4 WMP20G insert directly via Metav Werkzeuge or ask our consultants if application advice is required. CCMT060202-FM4 WMP20G turning insert — rhombic 80° form, Tiger·tec Gold, for rostfreier Stahl — Walter Tools The CCMT060202-FM4 WMP20G is a rhombic 80° turning insert with a Tiger·tec Gold coated carbide grade, engineered for reliable machining of rostfreier Stahl under medium to robust conditions. Tiger·tec Gold coating for extended tool life Optimised FM4 chipbreaker for secure chip control Rhombic 80° form with 0.2 mm nose radius Designed for rostfreier Stahl machining Consistent process security from coating and grade The combination of the Tiger·tec Gold coating and the WMP20G coated carbide offers enhanced resistance to adhesive wear and thermal loading, which translates into process stability during serial production. In practice, the improved coating hardness and optimised substrate chemistry reduce flank wear and minimise the tendency for built-up edge when turning rostfreier Stahl, a material group that typically produces high heat and tenacious chips. This results in longer tool life and fewer insert changes, supporting predictable cycle times and reduced downtime. Predictable chip control and surface quality Thanks to the engineered FM4 chipbreaker and the insert geometry, chip formation is controlled even under challenging cutting conditions. The Rhombic 80° form and 0.2 mm nose radius work together to balance cutting edge strength and finishing capability: small radii help achieve fine surface finishes, while the insert form provides the necessary support for interrupted cuts or heavier cross-sections. Improved chip control reduces manual intervention and contributes to a consistent finish on components made from rostfreier Stahl. Flexible application and mounting benefits The insert size and clearance specifications—featuring a 7° clearance—allow integration into common toolholders for turning operations, enabling easy interchangeability in conventional setups. The coated grade is aimed at medium to robust feed and speed ranges appropriate for rostfreier Stahl machining, offering a mix of wear resistance and edge stability. Choosing this insert helps standardise tooling across a range of applications, lowering inventory complexity while maintaining component quality and throughput. For demanding rostfreier Stahl turning, rely on Walter Tools' Tiger·tec Gold WMP20G grade and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCMT060202-FM4-WMP20G-WALTER Designation: CCMT060202-FM4 WMP20G Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT060202-FM4 WMP20G Walter Tools Numbers / Core technical data Clearance angle: 7° Corner radius: 0.2 mm Insert shape: Rhombic 80° Size code: 06 Thickness code: 02 Special features / Versions Series: Tiger·tec Gold Grade: WMP20G (coated carbide) Chipbreaker: FM4 Material application: rostfreier Stahl Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The CCMT060202-FM4 WMP20G is specified for machining rostfreier Stahl and performs well under the medium to robust cutting conditions typical for that material group. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on the insert promotes controlled chip formation and evacuation, improving productivity and reducing manual chip handling when turning rostfreier Stahl. What surface quality can be expected with this grade? When used with appropriate tooling and cutting parameters, the WMP20G grade helps achieve consistent surface finish thanks to edge stability and the 0.2 mm nose radius. Is the Tiger·tec Gold coating suitable for higher temperatures? Yes; the Tiger·tec Gold coating increases resistance to thermal wear and adhesive build-up, supporting higher cutting temperatures encountered in rostfreier Stahl machining. Can this insert be used in standard CCMT toolholders? The insert conforms to CCMT geometry and Rhombic 80° form, allowing compatibility with standard holders designed for CCMT inserts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
CCMT060202-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WMP20S grade for stable chip control and extended tool life when machining rostfreier Stahl; order the insert through Metav Werkzeuge or consult their specialists for application guidance. CCMT060202-FM4 WMP20S indexable insert — Walter Tools, Tiger·tec Silver, for rostfreier Stahl, FM4 chipbreaker, 7° relief The CCMT060202-FM4 WMP20S is a rhombic 80° indexable turning and boring insert designed for machining rostfreier Stahl under medium to robust cutting conditions Tiger·tec Silver coating for wear resistance Optimised for rostfreier Stahl machining FM4 chipbreaker for consistent chip control Rhombic 80° form with 0.2 mm corner radius Coating and grade for reliable stainless-steel performance The combination of the Tiger·tec Silver coating and the WMP20S grade provides a durable, coated carbide that supports stable cutting edges in demanding rostfreier Stahl applications. Coated carbides are engineered to reduce adhesion and thermal damage during cutting; the coating acts as a barrier against heat and chemical affinity, which are common causes of built-up edge when working with stainless steels. As a result, the insert helps maintain a consistent surface finish and extends effective tool life, reducing the frequency of index changes in production environments. Geometry and chip control that sustain process stability Engineered geometry is central to cutting performance: the FM4 chipbreaker promotes predictable chip formation and evacuation, while the rhombic 80° shape and 0.2 mm corner radius deliver a balance between edge strength and fine finishing capability. The 7° relief angle reduces rubbing on the flank face, lowering cutting forces and heat generation. Together, these features minimise vibration and support reproducible results on batch or continuous turning tasks, which in turn improves throughput and reduces scrap rates. Practical benefits for workshop productivity The insert’s combination of a robust grade and dedicated chip control translates into tangible production advantages: fewer interruptions for insert changes, improved component consistency, and more stable cutting parameters across varying rostfreier Stahl grades. The design supports medium to heavy duty operations without sacrificing surface quality, making the insert suitable for both general turning and light finishing passes. This contributes to higher overall equipment effectiveness and predictable machining cycles in industrial workshops. Integration and handling in the tooling system Available in the common CCMT format with plate size 06 and nominal thickness 02, the insert fits standard CCMT-compatible toolholders, simplifying tool inventory and changeover procedures. The indexable design allows multiple cutting edges per insert, improving cost-efficiency compared with single-point tools. Clear identification through the ISO designation and Walter Tools’ series marking assists in rapid selection for specific rostfreier Stahl tasks and ensures compatibility within existing turning tool systems. For application support, tool recommendations or fast supply of Walter Tools inserts, contact Metav Werkzeuge — Metav’s specialists provide tailored advice for integrating Tiger·tec Silver inserts into production processes Technical data Article number: CCMT060202-FM4-WMP20S-WALTER SKU: CCMT060202-FM4-WMP20S-WALTER Item designation: CCMT060202-FM4 WMP20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WMP20S Chipbreaker: FM4 Form: Rhombus 80° Relief angle: 7° Corner radius: 0.2 mm Plate size: 06 Thickness: 02 Suitable material group: rostfreier Stahl Product type: indexable turning/boring insert (CCMT) Numbers / Core technical data Relief angle: 7° Corner radius: 0.2 mm Plate size: 06 Thickness: 2.00 (nominal designation 02) ISO designation: CCMT060202-FM4 WMP20S SKU: CCMT060202-FM4-WMP20S-WALTER Special features / Versions Coating technology: Tiger·tec Silver Carbide grade: WMP20S (coated carbide) Chip control: FM4 chipbreaker Application focus: rostfreier Stahl machining Geometry: rhombic 80° insert form Usage: turning and boring operations FAQ What materials is this insert designed for? The CCMT060202-FM4 WMP20S insert is specified for machining rostfreier Stahl; the WMP20S grade and Tiger·tec Silver coating support secure chip formation and thermal resistance when working with stainless steels. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker delivers consistent chip control and evacuation, improving process stability and reducing the risk of entangling chips during turning with this Walter Tools indexable insert. Which toolholders accept this insert format? Standard CCMT-compatible turning holders accept the CCMT060202-FM4 geometry; the insert’s rhombic 80° form and plate size 06 correspond to common clamping systems in industrial tool ranges. What is the benefit of the 0.2 mm corner radius? A 0.2 mm corner radius increases edge strength compared with a very small radius, enabling a compromise between improved surface finish and resistance to chipping under medium cuts in rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer. The Walter brand is used where applicable.
CCMT060202-FM4 WSM10S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the FM4 chipbreaker to secure stable chip formation and longer tool life when machining stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the technical team for cutting data and toolholder matching. CCMT060202-FM4 WSM10S indexable insert — rhombic 80° geometry, Tiger‑tec Silver, Walter Tools CCMT060202-FM4 WSM10S is an indexable cutting insert for turning and boring operations, designed for demanding applications in stainless steels and heat‑resistant superalloys. Tiger‑tec Silver coating Suitable for stainless steels and superalloys Rhombic 80° form for versatile turning 0.2 mm corner radius for edge security Increase process reliability when machining tough materials The combination of the Tiger‑tec Silver coating and a coated carbide substrate delivers improved thermal resistance and edge stability, which reduces the frequency of tool change and supports consistent part quality. For materials assigned to ISO group M (stainless steels) and S (heat‑resistant superalloys and titanium), the WSM10S grade is formulated to control built‑up edge and withstand elevated cutting temperatures; the result is more predictable tool life and reduced scrap rates. The integrated FM4 chipbreaker promotes reliable chip control during interrupted cuts and heavy cross‑sections, helping to maintain cycle time and surface integrity on finished components. Geometry engineered for secure cutting and better surface finish The rhombic 80° shape offers a favourable approach angle for general turning and light boring, combining accessibility with robust cutting edge support. A 0.2 mm corner radius increases resistance to chipping while preserving the capacity for fine surface finishes in finishing passes. The moderate 7° clearance helps to avoid rubbing on the flank face, lowering heat transfer into the workpiece and improving dimensional stability. These geometric choices translate into tangible benefits on the shop floor: smoother tool behaviour, improved reproducibility and a lower risk of unexpected tool failure. Practical integration and machining recommendations for production The insert is available in the common CCMT size and fits standard toolholders for economical retrofit into existing tool assemblies. For stainless steels and superalloys, prefer higher cutting speeds with controlled feed and appropriate coolant or minimum‑quantity lubrication to manage workpiece heating; the Tiger‑tec Silver technology supports this approach by maintaining the cutting edge under thermal load. Use the FM4 chipbreaker geometry for mixed roughing/finishing tasks where chip separation and evacuation are critical. If process optimisation is required, Metav Werkzeuge can supply cutting data, holder recommendations and grade comparisons to match each production requirement. Contact Metav Werkzeuge for tailored cutting data, toolholder suggestions and to order the Walter Tools CCMT060202-FM4 WSM10S insert directly: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: CCMT060202-FM4-WSM10S-WALTER Designation: CCMT060202-FM4 WSM10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Free angle: 7° Corner radius: 0.2 mm Insert shape: Rhombic 80° Insert size: 06 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: FM4 Grade: WSM10S (coated carbide) Suitable for: stainless steels (M), heat‑resistant superalloys and titanium (S) Application: turning and boring indexable insert Execution: T FAQ What materials is this insert suitable for? The CCMT060202-FM4 WSM10S insert from Walter Tools is designed for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering stability and controlled chip formation in these demanding materials. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating increases thermal resistance and enhances edge stability, which reduces wear rates and supports higher cutting speeds when using the CCMT060202-FM4 WSM10S insert. Which geometry advantages does the rhombic 80° offer? The rhombic 80° geometry provides a versatile approach angle for both turning and light boring, improving accessibility while maintaining a robust cutting edge for consistent surface finish and dimensional accuracy. When should the FM4 chipbreaker be chosen? Choose the FM4 chipbreaker on the CCMT060202-FM4 WSM10S when reliable chip control is essential, for example with interrupted cuts, variable cross‑sections or when machining sticky stainless steels where chip evacuation can be problematic. Is this insert compatible with common CCMT toolholders? Yes, the insert follows the standard CCMT form factor and is compatible with typical CCMT toolholders; consult Metav Werkzeuge for holder suggestions and optimal clamping parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and brand names are the property of their respective owners. Brand names are referenced solely for explanation; there is no affiliation between our company and those brands. The offered item is an original, factory‑new product of the manufacturer.
CCMT060202-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for stable cutting in demanding alloys, plus the FM4 chipbreaker for predictable chip control; order directly via Metav Werkzeuge or request tailored application advice. CCMT060202-FM4 WSM20S indexable insert for stainless steels and superalloys — Walter Tools The CCMT060202-FM4 WSM20S is a rhombic 80° turning and drilling indexable insert engineered for secure chip formation and consistent edge stability when machining stainless steels and heat‑resistant superalloys. Tiger·tec Silver coated carbide grade WSM20S Optimised FM4 chipbreaker for stable chip control Rhombic 80° geometry with 0.2 mm corner radius Designed for stainless steels and superalloys High-performance cutting for demanding alloys The combination of the Tiger·tec Silver coating with the WSM20S grade delivers a balanced mix of wear resistance and thermal stability geared towards machining stainless steels and superalloys. This coated carbide formulation supports reliable heat management at the cutting edge, reducing the tendency for built‑up edge on tough, ductile materials. As a result, cycle times can be kept consistent and surface quality improved, which benefits both batch production and difficult one‑off operations. Controlled chips and secure cutting edges The insert’s FM4 chipbreaker is designed for predictable chip separation and evacuation, reducing interruptions and tool damage from erratic chip forms. Combined with the rhombic 80° geometry and a 0.2 mm corner radius, the geometry supports a robust cutting edge and controlled engagement under variable feeds and depths. The modest clearance angle (7°) aids in edge strength while maintaining effective contact geometry, contributing to a lower risk of sudden edge failure and more stable machining processes. Compatibility and efficient handling The CCMT form (06 size, 02 thickness) ensures wide compatibility with standard toolholders for turning and boring applications, allowing straightforward insert changes and minimal setup time. As an indexable insert, it enables quick replacement without regrinding, supporting predictable tool life management and reduced inventory complexity. The insert’s standard form factor also simplifies integration into existing tool chains and contributes to efficient spare‑parts handling in production environments. Process security and productivity gains Using a coated grade optimised for tough alloys enhances process security by delivering repeatable performance and longer edge life under thermally demanding conditions. The design choices—coating technology, chipbreaker profile and geometry—aim to increase productivity through fewer tool changes and fewer surface defects, while maintaining dimensional stability over longer tool life. Walter Tools’ engineering focus supports consistent results across a broad range of demanding workpiece materials. For tailored cutting recommendations, application trials or a project quote for Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: CCMT060202-FM4-WSM20S-WALTER Designation: CCMT060202-FM4 Brand: Walter Tools Grade: WSM20S Series: Tiger·tec Silver Product type: drilling / bore / turning indexable insert Facts Geometry: Rhombus 80° Clearance angle: 7° Corner radius: 0.2 mm Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: FM4 Coating: Tiger·tec Silver Substrate: coated carbide Material groups: S / M (superalloys / stainless steels) Intended use: machining of difficult‑to‑cut alloys FAQ What materials is this insert suitable for? The CCMT060202-FM4 WSM20S insert is designed primarily for stainless steels and heat‑resistant superalloys, offering a balance of thermal resistance and edge stability. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker provides controlled chip formation and evacuation, which reduces the risk of chip entanglement and supports steady cutting conditions when machining ductile or heat‑sensitive materials. Which toolholders are compatible with this insert form? The CCMT form and 06 size follow common industry standards for turning and boring toolholders, allowing use in a broad range of conventional indexable tool systems. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases wear resistance and helps manage heat at the cutting edge, contributing to longer tool life and improved surface finishes on demanding materials. Is this insert suitable for interrupted cuts? The insert’s robust geometry and coated carbide grade enhance edge strength and make it a viable option for many interrupted cut applications, depending on process parameters and machine rigidity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060202-FM4 WSM30S FM4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, an FM4 chipbreaker and a robust rhombic geometry to improve process stability when machining stainless steels and heat‑resisting alloys; order the CCMT060202‑FM4 WSM30S directly via Metav Werkzeuge or ask our consultants if needed. CCMT060202‑FM4 WSM30S — Rhombic 80° turning and drilling indexable insert by Walter Tools, Tiger·tec Silver CCMT060202‑FM4 WSM30S is an indexable insert designed for turning, boring and drilling support in demanding materials such as stainless steels and superalloys, offering stable cutting edges and optimised chip control. Tiger·tec Silver coating for high temperature stability Optimised FM4 chipbreaker for secure chip control 7° clearance angle with 0.2 mm corner radius Rhombic 80° insert for versatile turning/boring Stable performance for stainless steels and superalloys The coated grade WSM30S from the Tiger·tec Silver family is developed for machining stainless steels (ISO group M) and heat‑resisting alloys and titanium (ISO group S). Its formulation supports secure chip formation and reduces built‑up edge risk, which leads to increased process reliability. In practice this means fewer interruptions for tool change and more consistent component quality when handling tough, heat‑sensitive workpieces. Controlled chip flow reduces cycle time and risk The insert’s FM4 chipbreaker is optimised to form short, manageable chips in conditions that typically generate stringing or serrated chips. Controlled chip geometry improves coolant access and reduces the likelihood of tool damage and workpiece rework. Operators benefit from steadier feed rates and a lower tendency for workpiece surface defects, resulting in tangible productivity gains on series parts. Geometry and edge design increase application range A rhombic 80° shape combined with a 0.2 mm corner radius and 7° clearance angle provides a balance between versatility and edge strength. This geometry allows secure engagement in both finishing and light roughing passes, while the relatively small corner radius helps achieve finer surface finishes. The insert thickness and shape codes indicate compatibility with standard toolholders for turning and boring, simplifying tool management at the machine. Process security and predictable tool life Using a grade tailored to tough alloys supports a stable cutting edge at elevated temperatures, which, together with the coating and chipbreaker, extends effective tool life and reduces scrap rates. For production environments where repeatability and surface integrity are critical, these design choices contribute to lower total machining costs and higher first‑pass yields, especially on components made from heat‑resistant and corrosion‑resistant materials. For demanding stainless‑steel and superalloy machining tasks, request the Tiger·tec Silver WSM30S inserts from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and availability Technical data Article number: CCMT060202‑FM4‑WSM30S‑WALTER Designation: CCMT060202‑FM4 Grade/series: WSM30S, Tiger·tec Silver Manufacturer: Walter Tools Facts Corner radius: 0.2 mm Clearance angle: 7° Insert size: 06 Thickness code: 02 Special features Chipbreaker: FM4 Insert form: Rhombus 80° Material application: S / M Tolerance class: M Execution: T FAQ What materials is this insert intended for? The CCMT060202‑FM4 WSM30S from Walter Tools is intended primarily for stainless steels (ISO group M) and heat‑resisting superalloys/titanium (ISO group S), offering stable edge behaviour in these demanding materials. How does the FM4 chipbreaker improve machining? The FM4 chipbreaker on this insert shapes chips to be short and controllable, which improves coolant penetration, reduces entanglement and lowers the risk of tool and workpiece damage during turning and boring operations. What are the geometric benefits of the rhombic 80° shape? The rhombic 80° geometry provides versatility for both finishing and light roughing, enabling use in a range of toolholders while offering favourable approach angles for turning and boring tasks. Can this insert achieve a good surface finish with a small corner radius? Yes; the 0.2 mm corner radius supports finer surface finishes when used in appropriate feed and speed windows while still maintaining reasonable edge strength. Is this grade suitable for high‑temperature cutting conditions? The Tiger·tec Silver coating and the WSM30S grade are engineered for improved thermal resistance and edge protection, making them suited to higher cutting temperatures typical of stainless and heat‑resisting alloy machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. References to brand names are for explanation only; there is no affiliation between Metav Werkzeuge and the mentioned manufacturers. The offered item is an original, factory‑new product of the manufacturer.
CCMT060202-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of a fine‑finish cermet grade, reliable chip control and a compact rhombic geometry to enhance surface quality and process stability; order via Metav Werkzeuge or request cutting data from the technical team. CCMT060202-FP4 WEP10C — Turning indexable insert, Rhombic 80°, 0.2 mm corner radius — Walter Tools The CCMT060202-FP4 WEP10C is a rhombic 80° indexable insert engineered for precision turning and boring tasks in industrial metalworking applications. Cermet grade WEP10C for fine finishes Rhombic 80° geometry for versatile turning 0.2 mm corner radius for precise profiles FP4 chipbreaker for controlled chip formation Improved surface quality through a cermet edge The cermet composition of this insert is designed to deliver consistently fine surface finishes with reduced built‑up edge formation. In finishing operations the WEP10C grade shows a stable cutting behaviour that supports dimensional accuracy and lowers the need for subsequent rework. Due to the material specifics, suitability for particular workpiece materials should be verified against the product matrix to ensure optimal process parameters and expected tool life. Predictable chip control and process security The integrated FP4 chipbreaker promotes controlled chip formation and evacuation, helping to maintain a stable cutting zone and reduce interruptions. Combined with the 0.2 mm corner radius, the insert supports precise profile generation while limiting local stress peaks at the cutting edge. For process planners this means fewer cycle anomalies and a more repeatable machining sequence, which contributes directly to higher throughput and lower scrap rates. Geometry and tolerance for flexible tool assignment The Rhombic 80° shape and the 7° clearance angle enable versatile mounting in standard CCMT toolholders and suit a range of turning operations from light roughing to finishing. The insert’s tolerance class M ensures consistent interchangeability across tool assemblies, simplifying inventory management and changeover procedures on the shop floor while preserving part quality. Practical handling and specification notes The insert is supplied in the Walter Cermet series and carries the designation CCMT060202‑FP4; thickness and size are indicated by the manufacturer coding. Material specification is catalogue dependent, so detailed substrate and coating information should be confirmed in the current catalogue entry. For complex applications the technical data sheet and cutting recommendations are available to aid in selecting feed, speed and depth settings for safe, efficient machining. Contact Metav Werkzeuge for cutting data, compatibility checks and to arrange supply of Walter Tools CCMT060202-FP4 WEP10C inserts Technical data SKU: CCMT060202-FP4-WEP10C-WALTER Designation: CCMT060202‑FP4 WEP10C Series: Walter Cermet Grade: WEP10C Facts Insert shape: Rhombic 80° Corner radius: 0.2 mm Clearance angle: 7° Size code: 06 Thickness code: 02 Tolerance class: M Special features FP4 chipbreaker Cermet cutting material (catalogue dependent) Execution: T Note: Verify workpiece suitability via product matrix FAQ What machining tasks is this insert suited for? The CCMT060202‑FP4 WEP10C insert is intended for precision turning and boring operations where a fine surface finish and controlled chip flow are required; check the product matrix for specific material recommendations. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker promotes short, manageable chips and stabilises the cutting zone, improving process reliability when using the WEP10C cermet grade. Can this insert be used in all standard CCMT holders? Yes, the rhombic 80° format and tolerance class M permit use in compatible CCMT toolholders; confirm holder compatibility by toolholder manufacturer specifications. Is the cutting material specified in the catalogue? Material details are catalogue dependent; customers should consult the latest Walter Cermet catalogue or request the technical data sheet for precise substrate and coating information. What does the 0.2 mm corner radius mean for part finish? A 0.2 mm corner radius helps produce accurate profiles with reduced stress concentration at the edge, supporting improved surface integrity in finishing passes. Hersteller: Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for clarification only; there is no affiliation between our company and the mentioned manufacturers. The offered article is an original, factory‑new product of the manufacturer.
CCMT060202-FP4 WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, stable FP4 chip control and a precise rhombic geometry to keep machining cycles productive and predictable; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. CCMT060202-FP4 CCMT060202-FP4 WKP01G (WKP01G) turning indexable insert for steel and cast iron — Walter Tools A CCMT060202-FP4 WKP01G indexable turning insert designed for robust finishing and medium‑duty turning in steel and cast iron, featuring a Tiger‑tec Gold coated carbide grade and FP4 chipbreaker geometry. Tiger‑tec Gold coated carbide grade Optimised FP4 chipbreaker geometry Rhombic 80° shape, 0.2 mm corner radius For steel (P) and cast iron (K) Stable edge life for continuous production The combination of a Tiger‑tec Gold coating and a coated carbide substrate delivers enhanced wear resistance and consistent tool life across repeated cycles. This insert’s protective coating reduces flank and crater wear, which translates into fewer tool changes and steadier process throughput. The result is measurable productivity gains when turning common engineering steels and castings, with a focus on repeatable, reliable performance rather than experimental gains. Predictable chip formation to reduce interruptions Equipped with the FP4 chipbreaker, the indexable insert promotes controlled chip breaking and evacuation during typical turning operations. Predictable chip forms minimise the risk of entanglement and machine stoppages, supporting uninterrupted production runs. The insert’s geometry is tuned for the chip behaviour of both steel and cast iron, which makes it suitable for mixed production schedules where quick, clean chip control is essential for operator safety and process stability. Geometry engineered for dimensional accuracy The rhombic 80° shape combined with a 0.2 mm corner radius and a 7° relief angle provides a stable cutting edge and repeatable seating in standard CCMT toolholders. This geometry helps maintain consistent radial engagement and reduces deflection during finishing passes, supporting improved surface quality and tighter tolerance control. For operations where predictable form and fit are required, the insert’s design contributes directly to part quality and downstream assembly reliability. Versatility across common workpiece materials Designed for ISO groups P and K, the insert is applicable to a broad range of unalloyed and alloyed steel grades and abrasive cast irons. Its coating and grade selection balance toughness and hardness to cope with typical heat generation and abrasive wear encountered in these materials. As a result, this indexable insert suits shops that process both turned components and cast workpieces, offering a single standardised component to simplify tooling logistics and tool inventory. For machining tasks that demand consistent cutting performance, contact Metav Werkzeuge to specify the CCMT060202-FP4 WKP01G from Walter Tools and receive tailored recommendations for toolholder selection and cutting data. Technical Data Article number: CCMT060202-FP4-WKP01G-WALTER Designation: CCMT060202-FP4 WKP01G Series: Tiger‑tec Gold Grade: WKP01G Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.2 mm Plate shape: Rhombic 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Coating: Tiger‑tec Gold Chipbreaker: FP4 Material suitability: steel (P), cast iron (K) Substrate: coated carbide Application: turning / indexable insert FAQ What materials is this insert suitable for? The CCMT060202-FP4 WKP01G insert is intended for machining steel (ISO group P) and cast iron (ISO group K), as specified by the grade and coating selection. How does the FP4 chipbreaker affect performance? The FP4 chipbreaker promotes consistent chip segmentation and evacuation, reducing the likelihood of chip-related interruptions and supporting reliable cycle times with the Walter Tools insert. Is this insert compatible with standard CCMT toolholders? Yes — the geometry corresponds to the common CCMT format and seats in standard turning toolholders designed for rhombic 80° indexable inserts. Can the insert be used for finishing and semi‑finishing operations? The combination of a 0.2 mm corner radius and the Tiger‑tec Gold coating makes the insert suitable for finishing and medium‑duty semi‑finishing, offering a balance between edge strength and surface quality. What advantages does the Tiger‑tec Gold technology provide? Tiger‑tec Gold coating enhances wear resistance and cutting edge stability, extending usable tool life and improving process consistency when machining steels and cast irons with the Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The advertised article is original, brand‑new merchandise of the manufacturer.
CCMT060202-FP4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, predictable chip control and repeatable geometry for efficient steel turning; order the insert directly via Metav Werkzeuge or consult our specialists for process recommendations. Drehwendeschneidplatte CCMT060202-FP4 WPP10G for steel – Walter Tools CCMT060202-FP4 WPP10G is an indexable turning insert designed for general steel machining, combining Tiger·tec Gold coating and a dedicated FP4 chipbreaker for stable production performance Tiger·tec Gold coating for long tool life Optimised chip control with FP4 chipbreaker Rhombic 80° geometry, 0.2 mm nose radius Suited for steel (ISO P) machining Productivity and consistent performance for demanding turning The combination of Tiger·tec Gold technology and a coated carbide substrate ensures a robust cutting edge that extends tool life and raises machining uptime. The insert’s geometry—Rhombic 80° with a 0.2 mm nose radius and a 7° clearance—was developed to balance cutting stability with adaptability across a wide range of turning operations. As a result, process planners gain predictable wear behaviour, reduced tool changes and more consistent output quality, which directly supports higher throughput in series production. Reliable chip control and improved surface quality in steel The integrated FP4 chipbreaker and the WPP10G grade are tuned for the thermal and metallurgical characteristics of steel (ISO P). This combination delivers controlled chip formation, minimises the risk of built-up edge and helps to achieve superior surface finishes without extensive secondary finishing. In practical terms, the insert reduces time spent on chip management and rework, while offering a balance between wear resistance and toughness that is advantageous for medium-duty to higher-duty turning tasks in mixed-series manufacturing. Predictable dimensions and easy toolpool integration for planning Marked as CCMT060202-FP4, the insert follows familiar ISO coding and is made to a tolerance class M, supporting interchangeability and simple tool replenishment. The standardised 06 size and 02 thickness allow straightforward indexing in common toolholders, while the defined geometry helps engineers estimate feed and depth values with confidence. Clear, repeatable specifications make the insert suitable for production environments that prioritise reproducibility and quick setup times, reducing process variability and aiding lean manufacturing strategies. For dependable steel turning with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for availability and application support: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMT060202-FP4-WPP10G-WALTER ISO designation: CCMT060202-FP4 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Free cutting angle: 7° Nose radius: 0.2 mm Plate form: Rhombic 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Grade: WPP10G (Tiger·tec Gold coated carbide) Chipbreaker: FP4 Application: Steel (ISO P) Sort and series description: coated carbide; designed for steel with balanced wear resistance and toughness FAQ What materials is this insert designed for? The CCMT060202-FP4 WPP10G indexable insert from Walter Tools is intended primarily for steel (ISO P) machining and is optimised for the typical heat and chip behaviour of these materials. What advantages does the WPP10G grade provide? The WPP10G grade in the Tiger·tec Gold series combines a coated carbide substrate with surface engineering that improves edge stability and tool life, offering a compromise between wear resistance and toughness for varied steel turning tasks. Which operations suit the 0.2 mm nose radius and rhombic 80° geometry? The Rhombic 80° form with a 0.2 mm nose radius on the CCMT060202-FP4 WPP10G is well suited to finishing and semi-finishing passes where surface quality and dimensional control are required, while still allowing flexible entry and exit angles. How does the FP4 chipbreaker influence machining? The FP4 chipbreaker controls chip formation for typical steel grades, reducing long or tangled chips and improving expedience in chip handling and surface integrity during turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com