Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT060202-FP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the durable Tiger‑tec Gold coating and the versatile FP4 chipbreaker combined with a compact Rhombus 80° form to secure reliable, repeatable turning performance in Stahl operations; order the insert directly via Metav Werkzeuge or consult the team for process recommendations. CCMT060202-FP4 WPP20G – Rhombus 80° turning insert with Tiger‑tec Gold by Walter Tools The CCMT060202-FP4 WPP20G is a rhombic 80° indexable insert engineered for turning and boring tasks, optimised for general-purpose Stahl machining with a fine 0.2 mm corner radius and 7° clearance Tiger‑tec Gold coated carbide Optimised for Stahl applications Rhombus 80° geometry for versatile cutting FP4 chipbreaker for reliable chip control Enhanced tool life from modern coating technology The Tiger‑tec Gold coating on this grade provides a balanced combination of wear resistance and toughness, extending tool life under typical turning conditions. The WPP20G grade denotes a coated carbide designed for Stahl machining where consistent thermal behaviour and predictable chip formation are required. By reducing flank and crater wear, the coating supports longer uninterrupted cuts and fewer index changes, which increases component throughput and reduces unplanned downtime. Geometry and chip control for stable productivity A Rhombus 80° shape with a 0.2 mm corner radius and the dedicated FP4 chipbreaker combine to deliver stable cutting in a range of cutting parameters. The geometry allows comfortable access to shoulders and reduced cutting forces on interrupted cuts, while the chipbreaker shapes chips to avoid entanglement and promote safe evacuation. These features translate into steadier surface finishes and repeatable results, even in serial production where process stability is essential. Practical application guidance for workshop use This insert is tailored to Stahl applications and performs well across unalloyed and alloyed steels commonly grouped under ISO material class P. The moderate corner radius and clearance angle (7°) suit finishing and light profiling where dimensional control matters. For less experienced users: coated carbide means a hard substrate with a thin functional coating that resists abrasion; the chipbreaker designation indicates the insert’s ability to control chip form. For specific feeds, speeds and holder recommendations, consult machining data to align insert behaviour with the workpiece material and machine capabilities. Contact Metav Werkzeuge for tailored advice on integrating the Tiger‑tec Gold WPP20G insert into production, or request cutting data and application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCMT060202-FP4-WPP20G-WALTER Name: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT060202-FP4 WPP20G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold ISO designation: CCMT060202-FP4 WPP20G Facts Clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 06 Thickness code: 02 Tolerance class: M Special features Chipbreaker: FP4 Grade: WPP20G Material: coated carbide Application: Stahl Execution: T FAQ What materials is this insert suitable for? The CCMT060202-FP4 WPP20G insert is designed primarily for Stahl applications, delivering controlled chip formation and consistent wear behaviour in unalloyed and alloyed steels. What does the WPP20G grade indicate? WPP20G identifies a Walter Tools coated carbide grade within the Tiger‑tec Gold family that balances wear resistance and toughness for general-purpose Stahl turning. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker improves chip control and evacuation, supporting safer turning operations and better surface quality when using the CCMT060202-FP4 WPP20G insert. Is the 0.2 mm corner radius suitable for finishing operations? Yes, the fine 0.2 mm radius is suited to finishing and light profiling tasks where dimensional accuracy and surface integrity are priorities. Can this insert be used for interrupted cuts? The rhombic 80° geometry and robust coating provide good resistance to edge chipping, making the insert appropriate for many interrupted and general turning applications in Stahl. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CCMT060202-FW4 WPP20G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, economical tool life and precise chip control for efficient steel turning; order directly via Metav Werkzeuge or contact the technical team for application advice. CCMT060202-FW4 WPP20G indexable turning insert — Tiger·tec Gold coated, Rhombic 80°, 7° clearance by Walter Tools The CCMT060202-FW4 WPP20G is an indexable turning insert designed for reliable machining of steel, combining a Tiger·tec Gold-coated carbide grade with a medium clearance geometry for versatile turning operations. Tiger·tec Gold coating for extended tool life Suitable for steel (ISO P) machining Rhombic 80° form with 7° clearance FW4 chipbreaker for reliable chip control Consistent cutting performance across steel applications The insert's core advantage lies in the WPP20G coated carbide grade, which is engineered for stable wear behaviour when machining steels classified under ISO P. Because the coating reduces adhesion and improves heat resistance, the cutting edge maintains sharpness for longer periods, which translates into fewer indexings and reduced machine downtime. For workshops aiming to combine productivity with predictable tool life, the use of a robust coated grade delivers measurable benefits in cycle-time stability and surface consistency. Geometry engineered for controllable chips and good surface finish The Rhombic 80° geometry with a 7° clearance angle offers a balance between strength and accessibility when turning external profiles and shoulders. The FW4 chipbreaker is designed to split and curl chips into manageable segments, lowering the risk of entanglement and improving evacuation, particularly in medium-depth cuts. A corner radius of 0.2 mm supports fine finishing passes while helping to protect the cutting edge from impact loads; this combination reduces rework and contributes to a reliable surface quality on the workpiece. Practical benefits that affect the bottom line Operationally, the insert supports productive chip formation and stable cutting forces, which together increase process reliability and reduce unplanned tool changes. The indexable design allows a straightforward rotation to a fresh cutting edge, improving uptime versus solid tooling alternatives. When evaluated over multiple shifts, the improved wear resistance and consistent edge performance of the Tiger·tec Gold technology can lower total tooling cost per component and simplify tool management in production environments. For demanding steel turning tasks, specify the Walter Tools CCMT060202-FW4 WPP20G and consult Metav Werkzeuge for application-matched recommendations — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss cutting parameters and availability Technical data Article number: CCMT060202-FW4-WPP20G-WALTER Designation: CCMT060202-FW4 WPP20G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.2 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WPP20G Chipbreaker: FW4 Material class suitability: Steel (ISO P) Series/collection: Tiger-tec Gold Execution: T FAQ What materials is this insert intended for? The CCMT060202-FW4 WPP20G is specified for machining steels classified under ISO P and is optimised for the thermal and chip-formation behaviour typical of these materials. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold coating on the WPP20G grade improves heat resistance and reduces adhesion on the cutting edge, resulting in longer life and more consistent performance during serial turning with this Walter Tools insert. Which geometry features aid chip control? The rhombic 80° form combined with a 7° clearance and the FW4 chipbreaker ensures segmented, controllable chips and reliable evacuation for a range of turning operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
CCMT060202-FW4 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of stable edge life, controlled chip formation and versatile geometry for reliable turning of stainless steel and heat-resistant alloys. Order the insert directly via Metav Werkzeuge or consult our team for application-specific cutting data. CCMT060202-FW4 WSM20S indexable turning insert — Walter Tools, Tiger-tec Silver, FW4 chipbreaker CCMT060202-FW4 WSM20S is an indexable turning insert designed for demanding external turning and profiling applications in stainless steel and superalloys Tiger‑tec Silver coating for extended tool life FW4 chipbreaker for controlled chip formation Rhombic 80° shape for versatile turning operations 0.2 mm corner radius for consistent surface finish Consistent performance on stainless steel and superalloys The coated carbide grade WSM20S from the Tiger‑tec Silver family combines wear resistance with thermal stability, supporting secure chip formation when machining challenging materials. Specified for ISO groups M and S, the insert offers a 7° relief angle and a 0.2 mm corner radius, which together help to maintain a stable cutting edge under thermal and mechanical load. This results in a reliable surface finish and predictable tool life, reducing process variation on stainless and heat‑resistant alloys. Productivity gains through optimised geometry and chip control Featuring the FW4 chipbreaker and a rhombic 80° platform, the insert promotes consistent chip flow and clog‑resistant cutting, which helps to lower cycle times and minimise unplanned interruptions. The coated carbide construction from the Tiger‑tec Silver series supports higher cutting temperatures and improves resistance to abrasive wear; the outcome is a cost‑efficient milling routine with fewer index changes and enhanced throughput. Practical compatibility and handling benefits for production The insert’s CCMT form is compatible with common turning toolholders that accept rhombic 80° inserts, enabling quick indexing and uncomplicated replacement of worn edges. The tolerance class M ensures consistent seating and repeatable geometry across batches. For workshops transitioning between materials, this insert permits flexible set‑up for both medium and demanding turning tasks, while indexability reduces inventory complexity compared with brazed or solid tools. Contact Metav Werkzeuge for tailored cutting data and ordering of Walter Tools Tiger‑tec Silver inserts via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application specifics Technical Data SKU: CCMT060202-FW4-WSM20S-WALTER Designation: CCMT060202-FW4 Full designation: CCMT060202-FW4 WSM20S Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.2 mm Insert form: Rhombus 80° Size code: 06 Thickness code: 02 Tolerance class: M Special features Grade: WSM20S Series: Tiger‑tec Silver Chipbreaker: FW4 Coating: coated carbide (Tiger‑tec Silver) Material suitability: stainless steel, heat‑resistant superalloys / titanium (ISO groups M and S) FAQ What materials is this insert suitable for? The CCMT060202-FW4 WSM20S indexable turning insert (Walter Tools, Tiger‑tec Silver) is intended for stainless steel and heat‑resistant superalloys/titanium, corresponding to ISO material groups M and S. What are the key geometric specifications? The insert has a 7° relief angle, a 0.2 mm corner radius, a rhombic 80° form and a CCMT size code of 06, as defined for the CCMT060202 configuration. Is the insert coated and what benefit does the coating provide? Yes — the WSM20S grade uses the Tiger‑tec Silver coating technology, which enhances thermal resistance and wear performance for longer tool life under demanding cutting conditions. Which chipbreaker is integrated and what is its effect? The integrated FW4 chipbreaker promotes controlled chip formation and reliable evacuation, supporting stable cutting at varying depths of cut and minimising chip‑related interruptions. Can this insert be indexed and replaced in standard toolholders? The CCMT geometry matches standard toolholder pockets for rhombic 80° inserts, enabling quick indexing and straightforward replacement to restore a fresh cutting edge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer Walter Tools.
CCMT060204 WSM30S T Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger‑tec Silver coating and the WSM30S grade for reliable machining of stainless steel and heat‑resistant alloys; the rhombic 80° form with a 0.4 mm nose radius and 7° relief ensures stable cutting edges and consistent surface quality. Order the CCMT060204‑E47 WSM30S directly via Metav Werkzeuge or consult our technical advisors for process matching. CCMT060204-E47 WSM30S – Rhombic 80° indexable insert for drilling and boring, Tiger‑tec Silver; Walter Tools The CCMT060204‑E47 WSM30S is an indexable cutting insert designed for drilling and boring applications, optimised for stainless steel and high‑temperature superalloys where secure chip formation and edge stability are required. Tiger‑tec Silver coated carbide grade WSM30S Suited for stainless steel and superalloys M/S Rhombic 80° form with 0.4 mm nose radius 7° relief angle for stable cutting performance High process reliability for stainless steel and superalloys The combination of the WSM30S grade and Tiger‑tec Silver coating is engineered to resist thermal and mechanical wear during the machining of stainless steel and heat‑resistant alloys. This coated carbide composition supports controlled cutting edge behaviour and reduces the risk of built‑up edge, delivering consistent component tolerances and fewer tool changes. For demanding materials where heat generation and toughness challenge the cutting edge, this insert provides predictable performance and durable service life. Geometry that secures surface finish and edge strength The rhombic 80° shape with a 0.4 mm nose radius and a 7° relief angle balances strength and accessibility: the larger corner radius enhances edge durability, while the 80° form maintains cutting engagement for bore and drill support operations. The CCMT form factor is suitable for common toolholder pockets, enabling repeatable seating and straightforward indexing. The engineered geometry contributes to steady surface quality and reduced vibration in interrupted or unstable cuts. Chip control and longevity for efficient production Equipped with the E47 chipbreaker, the insert promotes reliable chip formation across a range of feeds and depths, which lowers cycle interruptions and improves machine utilisation. Improved chip control directly supports longer tool life and fewer tool changes, yielding measurable productivity gains. When integrated into a process with appropriate cutting data and coolant strategy, the result is a more economical machining cycle and enhanced output consistency. Practical integration and application guidance As an indexable insert, this product simplifies inventory management and reduces regrinding costs compared with brazed or solid tooling. The WSM30S variant from Walter Tools pairs well with holders designed for the CCMT geometry; for precise holder selection and cutting‑data recommendations, Metav Werkzeuge’s technical team can advise on optimal combinations. For complex geometries or mixed‑material batches, professional process support helps to unlock the full potential of the insert. For applications requiring stable cutting performance on stainless steel and superalloys, request the Walter Tools CCMT060204‑E47 WSM30S via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 to discuss tooling combinations and process parameters Technical Data Article number: CCMT060204-E47-WSM30S-WALTER SKU: CCMT060204-E47-WSM30S-WALTER Designation: CCMT060204-E47 WSM30S Facts Relief angle: 7° Nose radius: 0.4 mm Insert size: 06 Plate thickness: 02 Tolerance class: M Special features Coating/series: Tiger‑tec Silver Grade/sort: WSM30S Chipbreaker: E47 Plate form: Rhombus 80° Material suitability: S / M (superalloys / stainless steel) Execution: T FAQ Which materials is this insert suitable for? The CCMT060204‑E47 WSM30S is designed primarily for stainless steel and heat‑resistant superalloys (material groups M and S), offering secure chip formation and edge stability in these demanding alloys. What does the WSM30S grade offer compared with standard grades? WSM30S, in combination with the Tiger‑tec Silver coating, provides enhanced thermal resistance and wear control for Walter Tools inserts, improving consistency and tool life when machining tough, heat‑generating materials. How does the E47 chipbreaker affect cutting performance? The E47 chipbreaker on the CCMT060204‑E47 promotes reliable chip segmentation and evacuation, reducing the likelihood of entanglement and helping maintain steady cutting conditions for improved productivity. Is the CCMT060204‑E47 compatible with standard toolholders? The insert follows the CCMT form factor and is compatible with holders designed for CCMT‑style inserts; for confirmation of fit and clamping requirements, refer to the toolholder specifications or contact Metav Werkzeuge for advice. What measures extend the service life of this insert? Appropriate selection of feeds, speeds and coolant, together with correct clamping and regular inspection, will extend tool life; the WSM30S grade and Tiger‑tec Silver coating further support longevity under thermal load. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned solely for explanatory purposes. There is no connection between Metav Werkzeuge and the respective trademark owners; the offered item is an original, brand‑new product from the manufacturer.
CCMT060204-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with a 0.4 mm nose radius and the E47 chipbreaker provides reliable chip control and extended tool life when machining steel; order the CCMT060204-E47 WPP20G insert through Metav Werkzeuge or contact our consultants for application support. CCMT060204-E47 WPP20G indexable turning insert, Tiger·tec Gold — for steel (Walter Tools) The CCMT060204-E47 WPP20G is an indexable turning insert engineered for precision machining of ISO P materials, offering a balance of wear resistance and chip control for productive steel operations. Tiger·tec Gold coating for enhanced wear resistance 0.4 mm nose radius for consistent surface finish 7° relief angle for controlled chip formation Rhombic 80° shape for stable seating Reliable performance through advanced coating technology The combination of a coated carbide grade and the Tiger·tec Gold series delivers a clear benefit: extended tool life under the thermal and mechanical loads typical of steel turning. The coating optimises surface hardness and friction behaviour, which leads to improved wear resistance and more consistent component tolerances over longer production runs. For operations where predictable tool change intervals and repeatable part quality matter, this insert provides measurable process stability. Geometry tuned for consistent surface quality A 0.4 mm nose radius and a 7° relief angle are design choices that favour repeatable finishes without excessive cutting forces. The modest nose radius supports dimensional control on turned profiles while reducing the risk of chatter on medium-duty passes. The rhombic 80° plate form offers a secure clamping seat and reliable edge support, which together contribute to steady surface integrity and reduced rework requirements. Controlled chip formation for uninterrupted production The E47 chipbreaker is matched to the insert geometry and material group to promote controlled chip breakage when machining steel. Effective chip control reduces the likelihood of entanglement, eases chip evacuation, and helps maintain machine uptime. Where throughput and safety are priorities, the integrated chip control features translate into fewer interruptions and a cleaner working environment on the shop floor. Practical integration and selection guidance Designated in the CCMT format and supplied in tolerance class M, the insert fits common holders for turning operations and can be specified by its ISO designation for straightforward procurement and tool setup. The grade WPP20G is marked for steel applications and represents a balance between wear resistance and toughness, making the insert suitable for a broad range of general turning tasks. For precision alignment with process parameters, consult tooling charts or our specialists to match holder geometry and cutting data to the component requirements. Contact Metav Werkzeuge for tailored cutting-parameter advice or to request the CCMT060204-E47 WPP20G insert from our stock — our specialists will assist with application recommendations and compatibility checks Technical Data Article number: CCMT060204-E47 WPP20G SKU: CCMT060204-E47-WPP20G-WALTER Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Nose radius: 0.4 mm Relief angle: 7° Plate form: Rhombic 80° Size designation: 06 Thickness designation: 02 Tolerance class: M Special features Coating technology: Tiger·tec Gold Grade: WPP20G (coated carbide) Chipbreaker: E47 Application group: steel (ISO P) Format designation: CCMT060204-E47 Execution: T FAQ Is this insert suitable for steel turning operations? The insert is designed for ISO P materials; the WPP20G grade and Tiger·tec Gold technology make it suitable for a wide range of steel turning tasks. What does the E47 chipbreaker provide? The E47 chipbreaker delivers controlled chip formation when machining steel, improving chip evacuation and reducing machine interruptions for the CCMT060204-E47 WPP20G insert. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius balances dimensional control and surface quality, supporting consistent finishes while limiting cutting forces during general turning passes. Which insert designation should be ordered to match this product? Order using the ISO designation CCMT060204-E47 WPP20G or the SKU CCMT060204-E47-WPP20G-WALTER to ensure the correct grade and chipbreaker are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the manufacturers named. The offered item is original, factory-new goods of the manufacturer.
CCMT060204-E47 WPP20S WPP20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WPP20S grade to achieve stable chip formation and extended tool life in steel machining; the robust Rhombus 80° geometry and E47 chipbreaker further support productive, repeatable drilling and boring operations — order directly via Metav Werkzeuge or request tailored technical advice from the consultants. CCMT060204-E47 WPP20S – Drilling/Boring Indexable Insert, Tiger‑tec Silver, for Steel by Walter Tools CCMT060204-E47 WPP20S is an indexable insert designed for drilling and boring operations in steel, offering a combination of coated-carbide wear resistance and geometry optimised for secure seating and reliable chip control. Tiger‑tec Silver for process stability E47 chipbreaker for optimised chip control Rhombus 80° geometry for secure seating Suitable for steel (ISO P) machining Longer tool life through advanced coating and grade The Tiger‑tec Silver coating together with the WPP20S grade provides a balance between wear resistance and toughness, tailored to the thermal and mechanical demands of steel machining. This combination reduces flank wear and prolongs edge life under interrupted cuts, which translates into fewer insert changes and more productive cutting time. For production environments where consistent component quality is required, the coated-carbide specification stabilises the machining process and helps maintain dimensional accuracy across long runs. Geometry that ensures repeatable seating and accurate results A Rhombus 80° form with a corner radius 0.4 mm and a relief angle of 7° supports predictable engagement with the workpiece and reliable indexing in the toolholder. The defined corner radius balances edge strength and finishing capability, making the insert suitable where moderate edge robustness and surface quality are both required. The controlled geometry minimises vibration and contributes to a steady cutting action, which is particularly relevant for drilling and reaming operations in short- to medium-length cycles. Efficient chip control for uninterrupted production The E47 chipbreaker is engineered for the typical chip characteristics encountered when machining steels (ISO P). By guiding chips away from the cutting zone and breaking them into manageable lengths, the chipbreaker reduces the risk of chip re-cutting and workpiece damage, aiding machine uptime and operator safety. Combined with the coated substrate, chip control improves surface finish and reduces secondary operations, offering a clear cost-benefit when measured over production batches. Practical integration and process reliability Available in the ISO designation CCMT060204-E47 and produced in the Tiger‑tec Silver series, this insert fits common drill and boring toolholders that accept CCMT geometry. The tolerance class M and plate size code 06 support consistent interchangeability across matched tool systems, while the execution code T indicates the manufacturing style used by the supplier. Together, these details simplify inventory control and reduce setup variability, supporting a predictable, repeatable machining process in workshops focused on steel components. Contact Metav Werkzeuge for a technical consultation on Walter Tools CCMT060204-E47 WPP20S, sample availability and recommended cutting data for steel applications Technical Data Article number: CCMT060204-E47-WPP20S-WALTER Designation: CCMT060204-E47 WPP20S Product type: Bohr-/Aufbohrwendeschneidplatte (drilling/boring indexable insert) Manufacturer: Walter Tools Core data Corner radius: 0.4 mm Relief angle: 7° Plate size: 06 Plate thickness code: 02 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WPP20S (coated carbide) Chipbreaker: E47 Geometry: Rhombus 80° Material application: steel (ISO P) Execution: T FAQ What materials is this insert best suited for? The CCMT060204-E47 WPP20S is optimised for machining steel (ISO P); the WPP20S grade and Tiger‑tec Silver coating are configured to handle the heat and chip formation typical of unalloyed and alloyed steels. How does the Tiger‑tec Silver series affect tool life? The Tiger‑tec Silver coating on the WPP20S grade enhances wear resistance while preserving toughness, which generally results in longer usable life for the insert under standard drilling and boring conditions in steel. Can this insert be used for finishing operations? With a corner radius of 0.4 mm and the Rhombus 80° form, the insert delivers a balance of edge robustness and surface quality suitable for semi-finishing; final finishing may require specific geometries or smaller radii depending on tolerance requirements. Is the CCMT060204-E47 format compatible with common toolholders? Yes, the ISO designation CCMT060204-E47 follows established indexable insert standards and will fit toolholders designed for CCMT inserts, enabling straightforward replacement and inventory compatibility. What operational benefit does the E47 chipbreaker provide? The E47 chipbreaker is designed to break and evacuate chips effectively when machining steel, reducing the risk of chip entanglement and improving process stability and surface finish. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060204-E47 WSM20S T Wendeplatten - Walter Tools
High-performance coated carbide grade Tiger·tec Silver WSM20S, optimised for machining stainless steels and heat‑resistant alloys; the rhombic 80° geometry with a 0.4 mm corner radius and 7° clearance angle improves edge stability and chip control. Benefit from longer tool life and consistent process performance — order the insert via Metav Werkzeuge or consult our specialists for application advice. CCMT060204-E47 WSM20S — Drilling/boring indexable insert, Tiger·tec Silver (Walter Tools) The CCMT060204-E47 WSM20S is an indexable insert engineered for secure machining of stainless steels and heat‑resistant alloys in drilling and enlarging operations. Tiger·tec Silver coating for high wear resistance Optimised for stainless steels and superalloys Rhombic 80° geometry for cutting stability 0.4 mm corner radius for controlled edge strength Longer tool life and reliable cutting in demanding materials The Tiger·tec Silver grade WSM20S delivers a combination of wear resistance and thermal stability that suits materials prone to built‑up edge and hot zones. The coated carbide construction improves flank durability and supports a stable cutting edge under interrupted or heavy engagement conditions. For production environments where consistent cycle times and repeatable part quality are critical, this insert reduces tool changes and helps maintain dimensional accuracy over longer runs. Geometry that enhances process security and chip control The rhombic 80° geometry, paired with the E47 chipbreaker, is designed to balance entry stability and chip evacuation in drilling and enlargement tasks. A 0.4 mm corner radius increases edge strength for interrupted cuts, while the 7° clearance angle reduces friction against the workpiece. These measures translate into less edge wear and improved surface integrity. In practice, the geometry supports predictable chip formation and reduces the risk of surface defects when machining heat‑resistant alloys and stainless steels. Easy integration into production and measurable efficiency gains This indexable insert is compatible with standard toolholders used in drilling and boring operations, enabling quick changeover and repeatable set‑ups. The combination of grade and geometry is selected to deliver higher process reliability, which often results in lower tooling costs per part and fewer unplanned machine stops. For companies seeking to streamline their machining of demanding alloys, Metav Werkzeuge can advise on cutting parameters and inventory management to get the most from this insert. For application recommendations, availability or to discuss cutting data for Walter Tools' CCMT060204-E47 WSM20S, contact Metav Werkzeuge to speak with a technical consultant and confirm current stock levels Technical Data SKU: CCMT060204-E47-WSM20S-WALTER Designation: CCMT060204-E47 WSM20S Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Geometry: Rhombic 80° Chipbreaker: E47 Relief angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Execution: T Material indication: S / M Core data Clearance angle: 7° Corner radius: 0.4 mm Insert size designation: 06 Plate thickness designation: 02 Tolerance class: M Special features Coating: Tiger·tec Silver Grade material: coated carbide Suitable for: stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S) Application: drilling and enlarging operations Chip control: E47 chipbreaker Stable edge formation for interrupted cutting Designed for process reliability and longer tool life FAQ What materials is this insert designed for? The CCMT060204-E47 WSM20S from Walter Tools is designed for stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S), offering secure chip formation and thermal stability for these challenging materials. How does the Tiger·tec Silver coating help performance? The Tiger·tec Silver coating on the CCMT060204-E47 WSM20S increases wear resistance and heat tolerance, which helps to extend tool life and maintain cutting edge integrity under the higher temperatures common when machining stainless steels and superalloys. What advantages does the rhombic 80° geometry provide? The rhombic 80° geometry of the CCMT060204-E47 WSM20S enhances entry stability and offers a robust cutting edge, while the 0.4 mm corner radius improves resistance to chipping on interrupted cuts. Which chipbreaker is fitted and what is its effect? This insert features the E47 chipbreaker, which is tuned to promote short, controlled chips and reliable evacuation during drilling and enlarging operations with the CCMT060204-E47 WSM20S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, brand‑new product of the manufacturer.
CCMT060204-FK6 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKK10S grade and the FK6 chipbreaker for reliable cast‑iron machining; improved tool life and consistent chip control support higher productivity. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. CCMT060204-FK6 WKK10S — Turning / Boring indexable insert, Tiger-tec Silver, for cast iron, Walter Tools The CCMT060204-FK6 WKK10S is a rhombic 80° indexable insert designed for precision turning and boring operations in cast iron, offering controlled chip formation and stable cutting performance. Tiger-tec Silver coating for high wear resistance WKK10S grade optimised for cast-iron machining FK6 chipbreaker for short, controlled chips Rhombic 80° form with 7° clearance angle Consistent chip control for safer, faster machining The FK6 chipbreaker is engineered to produce short, controlled chips when machining cast iron, reducing the risk of entangling or long stringy chips that can interrupt a production run. Shorter chips mean fewer machine stops for cleaning, improved operator safety and more predictable tool behaviour. In practice, controlled chip formation helps to maintain stable cutting forces, contributing to consistent surface finish and fewer rejected parts. Coating and grade that extend cutting life The Tiger‑tec Silver series and the WKK10S coating combination provide enhanced wear resistance specifically tailored to abrasive cast‑iron materials. As a coated carbide grade, it is balanced to resist the micro‑abrasion typical of grey and nodular cast irons while retaining toughness for occasional interrupted cuts. For workshops aiming to lower tooling costs per component, this option offers a favourable balance between longevity and reliable edge performance. Geometry that stabilises turning and boring operations The insert’s rhombic 80° shape combined with a 7° clearance angle and a 0.4 mm corner radius gives a robust cutting edge with good accessibility for internal and external operations. The geometry supports a stable cutting action and facilitates quick indexability on compatible toolholders. These design choices improve process reliability during repeating cycles, allowing for controlled feed and depth‑of‑cut strategies without sacrificing edge strength. Practical advantages for production environments The CCMT060204-FK6 WKK10S from Walter Tools suits batch and continuous production where repeatability and process security are priorities. The balanced package of coating, grade and chip control helps reduce unplanned downtime and supports predictable tool change intervals. For manufacturing teams aiming to raise throughput while keeping quality consistent, this insert contributes to a measurable improvement in machining efficiency and part conformity. Contact Metav Werkzeuge to discuss how Walter Tools’ CCMT060204-FK6 WKK10S can improve cast‑iron productivity or request tailored machining recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMT060204-FK6-WKK10S-WALTER Designation: CCMT060204-FK6 WKK10S Series: Tiger‑tec Silver Tolerance class: M Numbers / Core technical data Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness code: 02 Designs / Special features Chipbreaker: FK6 Insert shape: Rhombic 80° Material group suitability: cast iron (K) Cutting material: coated carbide (WKK10S) FAQ What materials is this insert intended for? The insert is formulated for cast iron machining; the WKK10S grade and Tiger‑tec Silver coating are optimised for abrasive cast‑iron applications. How does the FK6 chipbreaker affect machining? The FK6 chipbreaker promotes short, controlled chips, which improves safety, reduces machine downtime and helps maintain consistent surface finishes during turning and boring. Is the CCMT060204-FK6 WKK10S suitable for internal boring? Yes, the rhombic 80° form and 7° clearance angle make the insert suitable for both external turning and internal boring when paired with the correct toolholder. Can this insert be indexed to use multiple cutting edges? The insert geometry supports indexing to present a fresh cutting edge, enabling extended tool life through multiple edge usage on compatible toolholders. Which brand manufactures this insert? This insert is produced by Walter Tools and specified as CCMT060204-FK6 WKK10S for cast‑iron applications. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060204-FK6 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a WKK20S grade optimised for cast iron, and a low 7° clearance for reliable chip control and extended tool life; order directly via Metav Werkzeuge or request machining advice from our consultants. CCMT060204-FK6 WKK20S turning insert – Rhombus 80° geometry, Tiger·tec Silver coating, Walter Tools CCMT060204-FK6 WKK20S is a turning insert designed for machining cast iron with a positive geometry and abrasion-resistant coating Tiger·tec Silver coating for wear resistance WKK20S grade optimised for cast iron machining Rhombus 80° geometry for versatile turning 0.4 mm corner radius for fine surface finishes Increased process stability through specialised coating and grade The Tiger·tec Silver coating paired with the WKK20S carbide grade delivers a balance of abrasion resistance and toughness that is specifically tuned to the abrasive nature of cast iron. The coating reduces flank wear rates under intermittent or interrupted cuts, so tool life is extended and machining intervals are lengthened. This results in a measurable reduction in tool changes and an improvement in overall process reliability for production runs where consistent dimensional accuracy is required. Geometry and edge design that support quality finishes The rhombus 80° shape with a 0.4 mm corner radius provides a controlled cutting edge for finishing and semi-finishing operations on grey and nodular cast irons. The positive rake and the nominal 7° free angle produce less cutting force and promote stable, short-breaking chips typical of cast materials. As a consequence, surface quality is improved and workpiece handling can be streamlined, with fewer secondary operations needed to meet dimensional and visual tolerances. Practical integration and workshop advantages Supplied in the proven CCMT format, the insert is compatible with a wide range of standard indexable holders used in turning centres and lathes. The FK6 chipbreaker supports predictable chip flow when paired with appropriate feeds, helping to avoid chip entanglement and facilitating unattended machining. The robust design and standardised form factor mean that stocking and tool-change procedures are simplified, contributing to reduced setup times and a more efficient shop-floor workflow. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools CCMT060204-FK6 WKK20S inserts, or request detailed cutting data and delivery options by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: CCMT060204-FK6-WKK20S-WALTER SKU: CCMT060204-FK6-WKK20S-WALTER Designation: CCMT060204-FK6 WKK20S Brand series: Tiger-tec Silver Grade: WKK20S Facts Corner radius: 0.4 mm Free angle: 7° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Coating: Tiger·tec Silver Material suitability: cast iron (ISO group K) Chipbreaker: FK6 Plate form: Rhombus 80° Execution: T FAQ What materials is this insert intended for? The CCMT060204-FK6 WKK20S insert is intended for machining cast iron, with the WKK20S grade and Tiger·tec Silver coating optimised for abrasive cast materials. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the CCMT060204-FK6 reduces abrasive wear and improves edge stability, which extends tool life and supports consistent production quality. What is the significance of the 0.4 mm corner radius? A 0.4 mm corner radius offers a compromise between strength and surface finish, enabling fine finishing passes while maintaining edge robustness during light interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Trademarks and trade names are the property of their respective owners and are used here for descriptive purposes only. The offered article is an original, brand-new product of the manufacturer.
CCMT060204-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold wear resistance, the WMP20G coated-carbide grade and the FM4 chipbreaker delivers reliable machining of stainless steel with consistent chip control and extended edge life; order the inserts through Metav Werkzeuge or request application advice from the consultants for seamless process integration. CCMT060204-FM4 WMP20G turning insert for stainless steel — Walter Tools The CCMT060204-FM4 WMP20G is a rhombic 80° indexable turning insert engineered for robust machining of stainless steels under moderate to demanding cutting conditions. Tiger·tec Gold coating for long tool life Optimised FM4 chipbreaker for stable chips 0.4 mm corner radius for consistent edge strength Rhombic 80° geometry for versatile turning Higher productivity through advanced coating and grade The insert combines the Tiger·tec Gold coating technology with the WMP20G coated-carbide grade to improve wear resistance and maintain edge integrity during extended cycles. This combination reduces flank wear rates and helps to sustain cutting performance when machining tough, work‑hardening materials. The result is a measurable improvement in productivity and fewer insert changes per shift, which directly supports efficient batch and single‑piece production. Consistent chip control and process reliability Equipped with the FM4 chipbreaker and a rhombic 80° geometry, the insert promotes predictable chip formation and evacuation. The chipformer design limits entanglement and ensures stable cutting forces, which reduces vibration and enhances surface finish. In practice, this means fewer interruptions for chip cleaning and a lower risk of damage to workpieces or tools, supporting steady, repeatable turning operations on stainless steel components. Robust edge design for demanding operations The 0.4 mm corner radius and a 7° clearance angle create a balance between edge strength and cutting precision. A larger nose radius improves load distribution across the cutting edge, which is beneficial when interrupted cuts or heavier sections must be machined. At the same time, the geometry preserves dimensional accuracy and contributes to improved tool life when used within recommended cutting parameters for stainless steel. Practical integration into production workflows The rhombic insert format and standard CCMT ISO designation make the component straightforward to integrate into common toolholders and lathe setups. The grade’s focus on stainless steel applications supports a broad range of parts manufacture, from food‑grade fittings to medical components. For operators less familiar with the grade’s capabilities, pairing the insert with appropriate feeds, speeds and coolant strategies will unlock the best compromise between tool life and surface quality. Discuss application requirements with Metav Werkzeuge and specify the CCMT060204-FM4 WMP20G for tailored recommendations; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and availability Technical data Article number: CCMT060204-FM4-WMP20G-WALTER Designation: CCMT060204-FM4 WMP20G Product type: Turning indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Numbers / Core technical data Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness code: 02 Geometry: Rhombic 80° Special features / Applications Coating / grade: WMP20G (coated carbide, Tiger·tec Gold) Chipbreaker: FM4 Material application: stainless steel (ISO group M) Typical use: turning / facing with standard CCMT toolholders FAQ What materials is this insert best suited for? The CCMT060204-FM4 WMP20G insert is optimised for machining stainless steel (ISO group M), offering stable chip control and wear resistance for such materials. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on this Walter Tools insert produces compact, controllable chips and helps maintain steady cutting forces, improving process reliability during turning operations. What benefits does the Tiger·tec Gold technology provide? Tiger·tec Gold enhances the coated-carbide grade’s wear resistance and thermal stability, extending edge life and supporting consistent performance with the WMP20G grade. Is the insert compatible with standard CCMT toolholders? Yes; the CCMT060204-FM4 WMP20G follows the CCMT ISO designation and fits conventional CCMT toolholders for turning applications without special adapters. What does the 0.4 mm corner radius mean for finished parts? A 0.4 mm corner radius increases edge strength and helps achieve smoother transitions on external profiles while reducing the risk of chipping on interrupted cuts. Trademarks and trade names mentioned are the property of their respective owners. Brand names are used solely for explanation and comparison; no connection or endorsement by the manufacturers is implied. The offered article is an original, factory‑new product of the stated brand. Manufacturer: Walter Tools; The Walter AG, Tübingen, Germany
CCMT060204-FM4 WMP20S WMP20S Wendeplatten - Walter Tools
Benefit from a Tiger·tec Silver coating and the WMP20S grade together with the FM4 chipbreaker and 0.4 mm corner radius for secure, repeatable performance when machining stainless steels; order CCMT060204-FM4 WMP20S directly via Metav Werkzeuge or consult the team for application advice. CCMT060204-FM4 WMP20S turning indexable insert — FM4 chipbreaker, 0.4 mm radius (Walter Tools) The CCMT060204-FM4 WMP20S is a rhombic 80° indexable insert designed for medium to robust stainless-steel turning applications, combining a Tiger·tec Silver coating with a geometry that promotes stable cut conditions. Tiger·tec Silver coated carbide grade WMP20S Optimised for stainless steels (ISO M) FM4 chipbreaker for stable chip control 0.4 mm corner radius, 7° clearance angle Consistent cutting performance for stainless steels The coated WMP20S grade, part of the Tiger·tec Silver family, is engineered specifically for the challenges of stainless steels (ISO group M). The combination of a coated carbide substrate and a modern coating system improves thermal resistance and reduces edge build-up, which helps maintain a stable cutting edge over longer cycles. This results in fewer interruptions for edge dressing and a more predictable tool life under medium to robust cutting conditions, supporting continuity in production processes. Predictable chip formation and improved surface finish The FM4 chipbreaker is designed to generate controlled chip forms when tackling ductile, work-hardening materials. By shaping chips reliably, the breaker reduces the risk of entanglement and contributes to consistent surface quality. The 0.4 mm corner radius increases edge strength at the cutting tip, improving resistance to crater wear and reducing the chance of chipping during interrupted cuts. The rhombic 80° insert geometry further supports flexible turning strategies, enabling stable cutting directions with good access to workpiece features. Practical fitment and workflow benefits in the workshop Supplied in the established CCMT060204-FM4 format with a plate size 06 and thickness 02, this indexable insert integrates with common toolholder systems used for external turning. The standard clearance of 7° supports effective chip evacuation and helps to avoid rubbing at the flank. Stocking a consistent grade such as this simplifies tooling logistics and makes process planning more reliable for production shops and jobbing operations that require repeatable results on rostfreiem Stahl. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Silver inserts and to secure supply of CCMT060204-FM4 WMP20S for stainless-steel turning operations Technical data Article number: CCMT060204-FM4-WMP20S-WALTER Designation: CCMT060204-FM4 WMP20S Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Clearance angle: 7° Insert form: Rhombic 80° Plate size: 06 Thickness: 02 Special features Series: Tiger·tec Silver Grade: WMP20S (coated carbide) Chipbreaker: FM4 Material application: stainless steels (ISO M) Geometry optimised for medium to robust conditions FAQ What materials is this insert suited for? The CCMT060204-FM4 WMP20S is specified for stainless steels (ISO M) and was developed to manage the toughness and heat sensitivity typical of these alloys. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker produces controlled chip forms that reduce entanglement and enable safer evacuation, improving process reliability when turning ductile or work‑hardening materials. What does the 0.4 mm corner radius mean in practice? A 0.4 mm corner radius increases the cutting edge strength, offering better resistance to chipping and improved performance on interrupted cuts while contributing to durable surface finish quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060204-FM4 WMP30G - Walter Tools
The combination of Tiger‑tec Gold grade and the FM4 chipbreaker ensures stable chip formation and consistent performance when machining stainless steels; expect reliable surface quality and predictable tool life. Order the CCMT060204‑FM4 WMP30G directly via Metav Werkzeuge or ask our consultants if needed. CCMT060204-FM4 WMP30G indexable insert — Walter Tools, Tiger‑tec Gold, for stainless steel, rhombic 80° geometry CCMT060204‑FM4 WMP30G is an indexable insert designed for turning and drilling applications on stainless steels, combining a Tiger‑tec Gold carbide grade with an FM4 chipbreaker for improved process stability Tiger‑tec Gold grade WMP30G Optimised FM4 chipbreaker Rhombic 80° shape for turning and drilling Suited to stainless steel machining Enhanced chip control for consistent production results The Tiger‑tec Gold grade delivers a balanced combination of wear resistance and toughness, tailored for the demands of stainless steel. Combined with the FM4 chipbreaker, the insert promotes secure chip formation and controlled evacuation under the elevated temperatures typical of machining austenitic and other rostfrei materials. This stabilised cutting behaviour reduces the risk of built‑up edge and supports uniform surface finish, which in turn minimises rework and contributes to steadier cycle times on component families where material stickiness and heat generation are concerns. Geometry designed for flexible turning and drilling operations The rhombic 80° form and compact size of this insert provide access to tight features while maintaining a robust cutting edge. With a 0.4 mm corner radius the geometry supports a compromise between strength and surface integrity, making it suitable for medium to robust cuts. The 7° clearance assists in avoiding rubbing on the flank face, improving dimensional accuracy and tool life. These geometric choices allow the insert to be used in a variety of holder systems and shallow‑to‑moderate depth cuts where accessibility and repeatable finish are priority requirements. Predictable performance and shopfloor productivity As a coated carbide insert in the WMP30G grade, the component is intended for reliable, repeatable performance in production environments. The combination of grade and chipbreaker was developed to offer long‑term stability in series manufacturing, lowering the frequency of insert changes and helping to reduce unscheduled stoppages. The result is a contribution to overall process productivity: fewer interruptions for insert handling, more consistent part quality across batches, and clearer planning of tool‑change intervals to support lean machining strategies. Contact Metav Werkzeuge for tailored cutting recommendations and availability of Walter Tools Tiger‑tec Gold inserts — Metav Werkzeuge can advise on application specifics and delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCMT060204-FM4-WMP30G-WALTER Designation: CCMT060204-FM4 WMP30G Manufacturer: Walter Tools Core specifications Clearance angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 06 Thickness code: 02 Features & applications Grade: WMP30G (coated carbide, Tiger‑tec Gold) Chipbreaker: FM4 Series: Tiger‑tec Gold Execution code: T Material group: M (suitable for stainless steel machining) FAQ Is this insert suitable for machining stainless steel? Yes. The CCMT060204‑FM4 WMP30G is specified for material group M and is optimised for machining stainless steels with the Tiger‑tec Gold grade and FM4 chipbreaker. What chipbreaker and grade does this insert use? The insert features the FM4 chipbreaker and the WMP30G grade from Walter Tools’ Tiger‑tec Gold range, a combination aimed at stable chip control and wear resistance. Which applications is this insert intended for? The geometry and grade make it suitable for turning and drilling‑related indexable applications where access and reliable surface quality on rostfrei materials are required. Can the insert be used for medium to heavy machining conditions? Yes. WMP30G is designed for medium to robust operating conditions on stainless steels, offering a balance of toughness and wear resistance for dependable performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names are used for identification and explanation only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
CCMT060204-FM4 WSM01 WSM01 Wendeplatten - Walter Tools
The combination of a coated carbide grade from the Tiger‑tec Silver series and an FM4 chipbreaker delivers predictable chip control and dependable edge life for machining stainless steels and heat‑resistant alloys — order tooling directly via Metav Werkzeuge or contact our consultants for application guidance. CCMT060204-FM4 WSM01 turning insert — Rhombus 80°, 0.4 mm radius (Walter Tools) The CCMT060204-FM4 WSM01 is a coated carbide turning insert designed for secure cutting of stainless steels and high‑temperature superalloys in demanding production environments. Tiger‑tec Silver coated grade WSM01 Optimised FM4 chipbreaker for stable chips Rhombus 80° geometry, 0.4 mm corner radius 7° clearance angle for secure cutting action Fast, predictable results on tough materials The coated grade WSM01 from the Tiger‑tec Silver line is engineered for materials that challenge tool life, notably stainless steels and heat‑resistant superalloys. Its coated carbide formulation improves thermal resistance and reduces the tendency for built‑up edge, which means fewer interruptions and steadier cycle times. For production settings where material toughness and thermal load can vary, this insert supports a consistent machining strategy and helps maintain component quality across batches. Controlled chips and improved surface consistency The FM4 chipbreaker is optimised to promote short, manageable chips when turning difficult alloys, reducing the risk of entanglement and rework. Stable chip formation contributes directly to a more uniform surface finish, fewer machine stops and less time spent on manual chip handling. As a result, cycle reliability increases and downstream processes benefit from fewer quality deviations. Geometry that balances strength and accessibility The Rhombus 80° form combined with a 0.4 mm corner radius and a 7° clearance angle gives a favourable balance between cutting edge strength and access to intricate profiles. This geometry supports repeatable edge engagement and reduced radial force, which in turn lowers the mechanical load on the toolholder and spindle. The compact plate size and industry standard format allow integration into many established tool systems without excessive setup changes. Versatile fit for standard tooling systems Designated as ISO CCMT060204‑FM4 WSM01, this indexable insert is compatible with a wide range of turning and boring toolholders that accept rhombic 80° plates. Its 02 thickness and size 06 format make it suitable for stable clamping and simple indexability, enabling quick changeovers in multi‑operation cells. Where process reliability and predictable wear are required, this insert can be specified as part of a tool set aimed at stainless and superalloy programmes. Production benefits and process alignment Specifying a grade from the Tiger‑tec Silver series with the FM4 chipbreaker helps align machining parameters with process goals: fewer interruptions, consistent component tolerances and improved throughput. The plate’s tolerance class M reflects machining accuracy suitable for demanding finishes on tough materials. When combined with a matched holder and appropriate cutting data, the insert supports high‑productivity turning with reduced need for corrective interventions. Contact Metav Werkzeuge for tailored tooling advice and to confirm the best insert grade and chipbreaker for specific stainless or superalloy applications — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CCMT060204-FM4-WSM01-WALTER Designation: CCMT060204-FM4 WSM01 Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Series: Tiger‑tec Silver Chipbreaker: FM4 Coated carbide grade: WSM01 Plate form: Rhombus 80° Material suitability: stainless steels (M), heat‑resistant alloys/titanium (S) ISO designation: CCMT060204‑FM4 WSM01 FAQ What materials is this insert best suited for? The CCMT060204‑FM4 WSM01 from Walter Tools is designed for stainless steels and heat‑resistant superalloys, reflecting the S/M material suitability of the Tiger‑tec Silver grade. How does the FM4 chipbreaker affect machining? The FM4 chipbreaker on this insert promotes controlled, short chips and aids stable machining, improving surface consistency and reducing interruptions in the production flow. Which toolholders accept this insert format? ISO‑format turning and boring holders that accommodate Rhombus 80° CCMT‑type plates will accept this insert; the CCMT060204‑FM4 WSM01 fits standard clamping systems for size 06 plates. What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius increases cutting edge robustness for interrupted cuts and supports a balance between edge strength and the ability to produce fine surface finishes. Is the WSM01 grade coated and thermally resistant? Yes, WSM01 is a coated carbide grade in the Tiger‑tec Silver series, formulated to improve thermal resistance and extend edge life when machining demanding alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and product names are the property of their respective owners and are used here for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
CCMT060204-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger-tec Silver wear resistance and a precise FM4 chipbreaker geometry for reliable machining of stainless steel and high-temperature alloys; purchase through Metav Werkzeuge or request application advice from our consultants. CCMT060204-FM4 WSM10S indexable insert – Walter Tools, Tiger-tec Silver, for stainless steel and superalloys CCMT060204-FM4 WSM10S as a high-performance indexable insert for turning and drilling-related applications, designed for heavy-duty cutting of stainless steel and heat-resistant alloys. Tiger-tec Silver coating for heat resistance and edge stability Optimised FM4 chipbreaker for consistent chip control Rhombic 80° geometry with 0.4 mm corner radius Suitable for stainless steel and superalloys High productivity where heat and adhesion are critical The Tiger-tec Silver coating combined with the WSM10S grade delivers improved temperature resistance and reduced adhesive wear, which is essential when machining stainless steel and other sticky materials. The coated carbide composition is engineered to maintain a stable cutting edge under thermal load, lowering the risk of built-up edge and enabling reproducible cycle times. This results in more consistent surface quality and extended tool life compared with uncoated grades, supporting efficient batch production and predictable machining cycles. Geometry and chip control that reduce interruptions The insert’s FM4 chipbreaker and rhombic 80° form are tuned to produce short, controllable chips in demanding materials. A 0.4 mm corner radius balances edge strength and cutting forces, which helps to avoid premature edge chipping while keeping cutting loads moderate. The 7° clearance angle reduces rubbing on the flank face and supports smooth entry and exit behaviour during interrupted cuts. Together, these features lower the likelihood of process stoppages and enable steady metal removal rates. Practical use and material suitability explained This indexable insert is specified for applications where ductility and heat sensitivity of the workpiece require a robust grade: primarily stainless steel (ISO group M) and heat-resistant superalloys or titanium alloys (ISO group S). The combination of grade and geometry supports secure chip formation and stable cutting edges even at elevated cutting temperatures. For workshop planners, the format and designation indicate compatibility with toolholders that accept CCMT-shaped inserts (size 06, thickness 02); the insert is particularly suitable for finishing to medium-depth roughing passes where surface integrity and tool life are priorities. Contact Metav Werkzeuge for tailored application recommendations or availability of Walter Tools Tiger-tec Silver inserts and to discuss the best insert geometry for specific stainless steel grades Technical Data Article number: CCMT060204-FM4-WSM10S-WALTER SKU: CCMT060204-FM4-WSM10S-WALTER Product type: Drill/boring indexable insert / turning indexable insert Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness designation: 02 Geometry: Rhombic 80° Special features Chipbreaker: FM4 Grade: WSM10S (Tiger-tec Silver coated carbide) Series: Tiger-tec Silver Tolerance class: M Execution: T Suitable for: stainless steel, superalloys and titanium (ISO groups M and S) FAQ What materials is this insert designed for? The CCMT060204-FM4 WSM10S insert is designed primarily for stainless steel (ISO group M) and for heat-resistant superalloys and titanium (ISO group S), offering secure chip formation and edge stability under thermal load. Which chipbreaker is fitted and what benefit does it bring? This insert features the FM4 chipbreaker; it provides consistent chip control and reduced risk of entanglement when machining ductile and temperature-sensitive materials with the CCMT060204-FM4 WSM10S geometry. What does the 0.4 mm corner radius mean in practice? A 0.4 mm corner radius on the CCMT060204-FM4 WSM10S balances edge strength and cutting forces, improving resistance to chipping while supporting good surface finish in finishing and medium-roughing passes. Is this insert compatible with standard CCMT toolholders? Yes, the CCMT060204-FM4 WSM10S follows the CCMT-form specification (size 06, thickness 02) and fits holders designed for CCMT indexable inserts. How does the Tiger-tec Silver series affect tool life? The Tiger-tec Silver technology in the WSM10S grade enhances thermal stability and wear resistance, which typically extends effective tool life and supports constant machining performance on stainless steel and demanding alloys. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names (such as Walter Tools) serves explanatory purposes only and does not indicate any affiliation with our company. The offered item is an original, factory-new product from the named manufacturer.
CCMT060204-FM4 WSM20S FM4 Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the Tiger‑tec Silver coating and the stable WSM20S grade for predictable chip formation in demanding alloys; the rhombic 80° geometry with a 0.4 mm corner radius and 7° relief ensures consistent surface quality and reliable edge life. Order the insert directly via Metav Werkzeuge or consult the technical advisors for process-specific recommendations. CCMT060204-FM4 WSM20S indexable insert for turning and boring, Tiger‑tec Silver – Walter Tools The CCMT060204-FM4 WSM20S is an 80° rhombic indexable insert optimised for machining rostfreier Stahl and high‑temperature alloys in productive turning and boring operations Tiger‑tec Silver coating for high wear resistance Optimised for rostfreier Stahl and superalloys Rhombic 80° CCMT geometry for versatile turning FM4 chipbreaker for controlled chips and surface finish Consistent machining of difficult materials with extended edge life The combination of the WSM20S carbide grade and the Tiger‑tec Silver coating addresses the principal challenges of machining rostfreier Stahl and heat‑resistant alloys: poor thermal conductivity, built‑up edge formation and high abrasion. The coated hardmetal composition supports stable chip formation and reduces flank wear, which translates into longer tool life and fewer index changes. For production environments where tool change time and repeatable part quality matter, this insert reduces downtime and contributes to steady process capability. Geometry that improves predictability and surface quality The rhombic 80° shape (CCMT) together with the FM4 chipbreaker and a 0.4 mm corner radius is designed to deliver controlled cutting forces and consistent chip control in interrupted and continuous cuts. A 7° relief angle reduces rubbing at the flank, helping to maintain a sharper effective cutting edge and improving surface finish. These geometric choices make the insert suitable for both finishing passes that demand low roughness and semi‑finishing operations requiring robust edge stability. Production benefits: reliability, ease of use and process efficiency Tolerance class M and the standard execution code support interchangeability across toolholders and machines, simplifying inventory and tool selection. The insert’s balance of wear resistance and edge stability contributes to predictable tool life, which aids cycle time planning and cost calculations. Integrated into a machining cell, the insert supports higher first‑pass yield and fewer reworks, offering a clear rational advantage for manufacturers seeking both throughput and consistent quality. For supply enquiries, application advice or to request cutting data for Walter Tools inserts such as the CCMT060204-FM4 WSM20S, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 for prompt technical support and availability information Technical data Article number: CCMT060204-FM4-WSM20S-WALTER Designation: CCMT060204-FM4 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Series: Tiger‑tec Silver Core specifications Corner radius: 0.4 mm Relief angle: 7° Size code: 06 Thickness code: 02 Tolerance class: M Materials & special features Grade: WSM20S Coating / technology: Tiger‑tec Silver Chipbreaker: FM4 Shape: Rhombic 80° (CCMT) Applicable material groups: rostfreier Stahl (M), S (superalloys / titanium) Execution: T FAQ What materials is this insert suitable for? The CCMT060204-FM4 WSM20S is designed primarily for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering stable cutting edges under high thermal loads. How does the Tiger‑tec Silver coating benefit production? Tiger‑tec Silver on the WSM20S grade improves wear resistance and heat management, which increases edge life and supports consistent chip formation during extended runs. Which chipbreaker is integrated and what is its effect? The FM4 chipbreaker provides controlled chip breaking and evacuation, reducing the risk of tangling and improving surface finish for both continuous and interrupted cuts. Is the geometry suitable for finishing passes? Yes; the rhombic 80° CCMT form with a 0.4 mm corner radius and 7° relief supports low cutting forces and good surface quality, making it suitable for finishing as well as semi‑finishing. What does the tolerance class M indicate? Tolerance class M denotes standard dimensional accuracy for this insert series, ensuring interchangeability and predictable fitting in compatible toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and indicate no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is original and supplied as new by the manufacturer.
CCMT060204-FM4 WSM30S T Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger‑tec Silver coating, a proven FM4 chipbreaker and stable rhombic geometry for consistent machining of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult their specialists for cutting data and tool pairing. CCMT060204-FM4 WSM30S — Indexable turning insert, Tiger‑tec Silver, Walter Tools A CCMT060204-FM4 WSM30S indexable insert designed for heavy‑duty turning of stainless steels and heat‑resistant superalloys, offering reliable edge stability and secure chip control in demanding turning operations Tiger‑tec Silver coated carbide grade WSM30S Optimised FM4 chipbreaker for secure chip control Rhombic 80° geometry with 0.4 mm corner radius 7° relief angle for stable cutting performance High‑performance grade for demanding materials The CCMT060204-FM4 WSM30S combines a modern Tiger‑tec Silver coating with a WSM30S coated‑carbide grade engineered for materials classified as M and S under ISO 513. That means the grade is tailored for stainless steels (M) and heat‑resistant superalloys or titanium (S), where thermal load and built‑up edge are critical. The combination of coating and substrate promotes a stable cutting edge and extended tool life, reducing interruptions in production and contributing to predictable machining cycles. Geometry and chip control that improve process reliability The insert’s FM4 chipbreaker works together with the rhombic 80° shape and a 0.4 mm corner radius to produce short, controllable chips and a consistent cutting contact. The 7° relief angle reduces rubbing at the flank while maintaining edge strength, which supports dimensional stability and surface finish. These geometric choices translate into fewer reworks and more reliable component tolerances, particularly in long turning passes and interrupted cuts. Coating and durability for productive machining Thanks to the Tiger‑tec Silver technology, the surface treatment offers improved adhesion and thermal protection compared with conventional coatings. This results in better wear resistance and higher resistance to edge degradation when machining tough‑to‑cut alloys. For production environments seeking lower tool consumption and consistent quality, the grade’s performance characteristics provide measurable gains in uptime and repeatability without sacrificing edge robustness. Practical use and workshop integration This indexable insert is intended for use in standard turning toolholders compatible with CCMT geometry; the designation and size (06, thickness 02) make it suitable for a range of tool bodies. In practice, the grade excels in both medium and heavy cutting when the insert geometry is matched to the operation—roughing, semi‑finishing or finishing—while the FM4 chipformer helps maintain safe chip flow. For specific cutting parameters and holder recommendations, Metav Werkzeuge’s consultants can advise on the optimal setup for a given workpiece material and machine. For tailored advice on applying Walter Tools’ Tiger‑tec Silver inserts in stainless steel or superalloy turning, contact Metav Werkzeuge for professional support and fast supply. Technical data Article number: CCMT060204-FM4-WSM30S-WALTER Designation: CCMT060204-FM4 WSM30S Manufacturer: Walter Tools Numbers / Core technical data Relief angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Tolerance class: M Designs / Special features Series: Tiger‑tec Silver Grade: WSM30S (coated carbide) Chipbreaker: FM4 Geometry: Rhombic 80° Suitable for: stainless steels (M), heat‑resistant superalloys/titanium (S) FAQ What materials is this insert suitable for? This insert is suited for machining stainless steels and heat‑resistant superalloys (ISO groups M and S); the WSM30S grade and Tiger‑tec Silver coating support secure chip formation and edge life in these materials. What does the FM4 chipbreaker do? The FM4 chipbreaker on this insert is designed to produce shorter, manageable chips and to stabilise cut flow, which improves process security and reduces the risk of entanglement in turning operations. Which operations is the insert best for—roughing or finishing? Depending on toolholder choice and cutting parameters, the insert performs well in both roughing and semi‑finishing; the 0.4 mm corner radius helps achieve a balance between edge strength and surface quality. How does the rhombic 80° geometry affect machining? The rhombic 80° shape provides a versatile cutting angle that balances radial and axial forces, supporting stable turning and good access in shoulder and profile work while maintaining chip control. How to identify the correct toolholder for this insert? Select a toolholder compatible with CCMT‑style inserts and the insert size (06). Toolholder recommendations should match the insert geometry and intended cutting data; Metav Werkzeuge can advise on pairing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only and do not indicate any affiliation with our company. The offered item is original, factory‑new merchandise from the manufacturer.
CCMT060204-FM6 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for reliable performance in demanding stainless and heat‑resistant alloy applications; the rhombic 80° geometry with a 0.4 mm corner radius and 7° clearance ensures stable chip control and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult the Metav team for process‑specific recommendations. CCMT060204-FM6 WSM20S turning/boring indexable insert — Tiger·tec Silver, for stainless steel & superalloys | Walter Tools CCMT060204-FM6 WSM20S is a coated turning and boring indexable insert engineered for machining stainless steel and high‑temperature superalloys in demanding production environments Tiger·tec Silver coating for wear resistance WSM20S grade for stainless and superalloys Rhombic 80° geometry for versatile turning 0.4 mm corner radius with 7° clearance Productivity through wear‑resistant coating and robust grade The combination of the Tiger·tec Silver coating and the WSM20S cutting grade provides measurable improvements in tool life and process stability when machining difficult‑to‑cut materials. The coating enhances wear resistance and reduces crater wear, while the substrate and grade chemistry are tuned for heat resistance and edge stability; together they enable longer uninterrupted cutting periods, fewer insert changes and a clearer cost‑per‑part advantage. For production planning, this means higher uptime and a more predictable tooling schedule. Better chip control and surface reliability in demanding materials Built with a rhombic 80° shape and a dedicated FM6 chipbreaker, the insert promotes consistent chip formation when turning stainless steel and superalloys. The modest 0.4 mm corner radius balances strength at the cutting edge with the ability to generate a good surface finish on difficult alloys. The specified 7° clearance angle helps prevent rubbing and reduces heat transfer into the cutting edge, which in turn improves dimensional repeatability and surface integrity on each pass. These geometric choices reduce the risk of built‑up edge and help maintain a reliable process window. Simple integration and clear handling benefits for workshop use This indexable insert is supplied in the standard CCMT form factor, compatible with common toolholders and tool posts used in turning and light boring operations. The CCMT060204-FM6 WSM20S insert is easy to mount and index, enabling quick changeovers and minimal downtime. The FM6 chipbreaker assists chip evacuation in both continuous and interrupted cuts, reducing manual chip handling and improving operator safety. For shops aiming to scale throughput, this insert supports a transition to more consistent cycle times and predictable component quality. Contact Metav Werkzeuge today for tailored application advice on Walter Tools Tiger·tec Silver inserts and ensure the right grade selection for specific stainless steel or superalloy operations — Metav Werkzeuge is available by e-mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: CCMT060204-FM6-WSM20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT060204-FM6 WSM20S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WSM20S Facts Insert size: 06 Thickness: 02 Corner radius: 0.4 mm Clearance angle: 7° Chipbreaker: FM6 Special features Rhombic 80° insert geometry Coated carbide cutting material Designed for stainless steel and superalloys (ISO group M and S) Suitable for demanding, heat‑generating cutting tasks FAQ Which materials is this insert designed to machine? The CCMT060204-FM6 WSM20S insert is designed for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering stable chip formation and edge life in those materials. What is the benefit of the Tiger·tec Silver coating on this insert? The Tiger·tec Silver coating increases wear resistance and reduces thermal softening at the cutting edge, which improves tool life and process stability when the CCMT060204-FM6 WSM20S is used on demanding alloys. How does the FM6 chipbreaker affect machining? The FM6 chipbreaker is engineered to promote controlled chip formation and evacuation, lowering the risk of entangling chips and supporting consistent surface finishes with this indexable insert. Is the insert compatible with standard CCMT toolholders? Yes, the CCMT060204-FM6 WSM20S follows the CCMT form factor and fits conventional CCMT‑compatible turning and boring holders, enabling straightforward tool changes. What surface finish and edge strength can be expected with a 0.4 mm corner radius? A 0.4 mm radius offers a compromise between edge robustness and achievable surface finish, giving the CCMT060204-FM6 WSM20S sufficient edge strength for interrupted cuts while still producing good component surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CCMT060204-FM6 WSM30S FM6 Wendeplatten - Walter Tools
Take advantage of the combination of a heat‑resistant Tiger·tec Silver coating, a stable WSM30S grade and the proven FM6 chipbreaker for reliable performance when machining tough materials; order the inserts directly via Metav Werkzeuge or consult the Metav team for application guidance. CCMT060204-FM6 WSM30S — turning and boring indexable insert, Tiger·tec Silver, Walter Tools CCMT060204-FM6 WSM30S is a rhombic 80° coated carbide insert engineered for heavy and demanding turning and boring tasks, especially on rostfreier Stahl and heat‑resistant superalloys. CCMT060204-FM6 WSM30S by Walter Tools Tiger·tec Silver coating for heat resistance 7° clearance and 0.4 mm corner radius Designed for rostfreier Stahl and superalloys Higher productivity through optimised coating and grade The Tiger·tec Silver coating combined with the WSM30S coated carbide substrate improves thermal stability and wear resistance, which directly supports higher cutting speeds and longer tool life. In practice, this leads to fewer insert changes and reduced downtime, so cycle times are shortened while process reliability is increased. The combination is particularly suited to applications where heat generation and adhesion threaten surface integrity and cutting edge stability. Secure chip control and consistent cutting action The chipbreaker FM6 has been developed for controlled chip formation when machining sticky or work‑hardening materials. The insert geometry ensures predictable chip flow and reduced risk of built‑up edge, which preserves surface finish and dimensional repeatability. For operations where consistent chip evacuation is essential, this indexable insert maintains cutting stability and reduces manual chip management. Geometry tailored to robust turning and boring Featuring a Rhombus 80° form and CCMT 06 size, the insert offers a balance between edge strength and accessibility in confined grooves or bores. The 7° clearance and 0.4 mm corner radius support secure engagement and edge support during interrupted cuts or depth changes. These geometric characteristics make the insert a dependable choice for medium to heavy turning passes where edge robustness matters more than fine finishing. Material range and application benefits Specified for ISO groups M (rostfreier Stahl) and S (superalloys and titanium), the grade is effective where materials challenge heat dissipation and tool wear. The insert is therefore recommended for components that demand high process security, such as shafts, flanges and aerospace parts made from heat‑resistant alloys or rostfreier Stahl. Toolholders compatible with standard CCMT clamping systems can be used without modification, enabling quick integration into existing turning and boring setups. For application support, sample availability or to secure Walter Tools CCMT060204-FM6 WSM30S inserts through Metav Werkzeuge, contact Metav Werkzeuge GmbH for tailored advice and fast supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMT060204-FM6-WSM30S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT060204-FM6 WSM30S Walter Tools Product type: turning and boring indexable insert Brand: Walter Tools Series: Tiger-tec Silver Grade: WSM30S ISO designation: CCMT060204-FM6 WSM30S Tolerance: M Design: T Core measurements Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Plate thickness: 02 Rhombus angle: 80° Special features Coating: Tiger·tec Silver Chipbreaker: FM6 Suitable materials: rostfreier Stahl (ISO M), superalloys and titanium (ISO S) Geometry: Rhombus 80°, CCMT form Application focus: turning and boring operations FAQ Which materials is the insert suitable for? The CCMT060204-FM6 WSM30S insert from Walter Tools is specified for rostfreier Stahl (ISO M) and for heat‑resistant superalloys and titanium (ISO S). What advantages does the Tiger·tec Silver coating provide? Tiger·tec Silver on the WSM30S grade increases thermal resistance and reduces adhesive wear, helping the insert to sustain higher cutting speeds and longer tool life in demanding applications. How does the FM6 chipbreaker affect machining? The FM6 chipbreaker ensures controlled chip formation and evacuation, which improves surface finish and reduces the risk of built‑up edge during prolonged turning or interrupted cuts. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
CCMT060204-FP4 WEP10C WEP10C Wendeplatten - Walter Tools
Take advantage of the combination of cermet performance, a precise Rhombic 80° geometry and a controlled FP4 chipbreaker for stable finishing operations; order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. CCMT060204-FP4 WEP10C – Walter Tools rhombic 80° turning and boring insert, cermet grade CCMT060204-FP4 WEP10C is an indexable insert designed for finishing and light turning/boring operations where dimensional consistency and surface quality are essential Cermet grade WEP10C for precision finishing Rhombic 80° geometry for stable cutting FP4 chipbreaker for controlled chip formation 0.4 mm corner radius improves surface finish Consistent finishing with a cermet-grade insert The combination of WEP10C and the Walter Cermet series targets processes that prioritise repeatable surface quality and tool life. Cermet grades, as used here, are engineered for high hardness and thermal stability, which supports sustained finishing performance at moderate cutting speeds. The insert’s material class is intended to reduce flank wear under steady-state conditions, making it suitable where consistent surface integrity is required. For process planning, the grade should be cross-checked against the machining matrix to confirm optimal cutting parameters for the specific workpiece material. Geometry and chip control that protect the workpiece The Rhombic 80° shape coupled with a 7° clearance angle and the FP4 chipbreaker delivers a balance between edge strength and chip control. The 80° lead angle improves insert engagement for turning and boring, while the 0.4 mm corner radius helps to distribute cutting forces and reduce the risk of localised surface defects. The chipbreaker design promotes short, controllable chips during finishing cuts, which reduces rework time and helps maintain clean tool–workpiece interfaces. These geometric choices translate into fewer interruptions and improved part-to-part repeatability on shop-floor applications. Defined dimensions and tolerance for reliable toolholding and programming The insert designation CCMT060204-FP4 reflects a standard ISO geometry widely supported by toolholders, simplifying integration into existing tool systems. Key specifications such as size 06, thickness 02 and tolerance class M facilitate predictable clamping and process reproducibility. The execution marked as T and the FP4 chipbreaker are additional markers for selecting compatible holders and setting up CAM parameters. When planning a job, include these data points in the tool library to ensure correct offsets and tool compensation. If material suitability is unclear, consult the manufacturer’s product matrix or contact the supplier for tailored advice. Contact Metav Werkzeuge for application guidance, stock information and personalised recommendations on Walter Tools CCMT060204-FP4 WEP10C inserts; the team can advise on cutting data and suitability for specific materials Technical data Article number: CCMT060204-FP4-WEP10C-WALTER Designation: CCMT060204-FP4 WEP10C Brand: Walter Tools Series: Walter Cermet Grade: WEP10C Chipbreaker: FP4 Geometry: Rhombus 80° Clearance angle: 7° Corner radius: 0.4 mm Size: 06 Thickness: 02 Tolerance class: M Execution: T Material: Katalogabhängig Facts Clearance angle: 7° Corner radius: 0.4 mm Size: 06 Thickness: 02 Tolerance class: M Special features Cermet cutting material (WEP10C) FP4 chipbreaker for controlled chips Walter Cermet product series Rhombus 80° insert form ISO designation CCMT060204-FP4 FAQ What materials is this insert suitable for? The WEP10C cermet grade is intended for finishing applications; suitability depends on the specific workpiece material—check the Walter Cermet product matrix or contact Metav Werkzeuge for compatibility guidance regarding the CCMT060204-FP4 WEP10C insert. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker is designed to produce short, controllable chips during finishing cuts, helping to maintain surface integrity and reduce chip-related interruptions when using the CCMT060204-FP4 WEP10C insert. What does the tolerance class M indicate? Tolerance class M denotes a medium tolerance level for the insert geometry, supporting consistent clamping and predictable tool offsets in standard toolholder systems. Can the CCMT060204-FP4 WEP10C be used for roughing? This insert is optimised for finishing and light turning/boring; for heavy roughing, consider a grade and geometry specifically rated for higher mechanical loads rather than the cermet finishing grade. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
CCMT060204-FP4 WKP01G WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life from the Tiger‑tec Gold grade, stable chip control with the FP4 breaker and the versatile rhombic 80° CCMT geometry for consistent productivity and low downtime; order the CCMT060204-FP4 WKP01G directly via Metav Werkzeuge or contact our consultants for application advice. CCMT060204-FP4 WKP01G — Turning & boring indexable insert, Tiger‑tec Gold, Walter Tools A compact turning and boring indexable insert, the CCMT060204-FP4 WKP01G is designed for productive machining of steel and cast iron with a balanced combination of wear resistance and chip control. Tiger‑tec Gold coating for long tool life Optimised FP4 chipbreaker for stable chips Rhombic 80° CCMT form for versatile turning Suitable for steel (P) and cast iron (K) Higher productivity through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WKP01G grade delivers notably improved wear resistance, which directly extends tool life and reduces the frequency of insert changes. This advantage translates into fewer tool interventions during a shift and a steadier production flow. The coating technology is optimised for the thermal and abrasive loads encountered when machining steels and cast irons, so the insert maintains cutting-edge stability over longer cycles without sacrificing process reliability. Predictable chip formation for reduced downtime Equipped with the FP4 chipbreaker the insert promotes controlled chip control, producing short, manageable chips in typical turning and boring operations. Stable chip formation reduces the risk of entanglement and machine stoppages and supports consistent tool engagement, resulting in improved surface finish and fewer secondary operations. For operations where cycle time and reproducibility matter, the optimised chip geometry helps keep the process efficient and repeatable. Geometry tuned for flexibility and accuracy The rhombic 80° CCMT form combined with a corner radius 0.4 mm and a clearance of 7° offers a versatile balance between entry strength and finishing capability. The rhombic shape enables both conventional and light finishing cuts with predictable cutting forces, while the modest corner radius provides a robust edge that supports stable turning on interrupted surfaces. These geometry choices help achieve dimensional accuracy with fewer tool offsets and simplified set‑up routines. Application scope and economical performance Designed for machining steel (P) and cast iron (K) and presented in tolerance class M, the insert suits a wide range of industrial turning tasks where productivity and consistent results are priorities. The solid performance characteristics of the Tiger‑tec Gold family mean better stand times and a favourable cost‑per‑part balance when compared with conventional grades. Walter Tools’ geometry and grade pairing is targeted at manufacturers seeking reliable, repeatable performance across batch sizes. Discuss the Walter Tools CCMT060204-FP4 WKP01G with Metav Werkzeuge to confirm suitability for specific applications or to request micro‑geometry recommendations; Metav Werkzeuge can advise on cutting data and optimisation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMT060204-FP4-WKP01G-WALTER ISO designation: CCMT060204-FP4 WKP01G Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Series: Tiger‑tec Gold Facts Plate size: 06 Plate thickness: 02 Corner radius: 0.4 mm Clearance angle: 7° Tolerance class: M Special features Chipbreaker: FP4 Plate form: Rhombus 80° Grade/sort: WKP01G Applicable materials: P (steel) / K (cast iron) Execution: T FAQ What materials is this insert intended for? The CCMT060204-FP4 WKP01G is designed for machining steel (P) and cast iron (K), reflecting the Tiger‑tec Gold grade’s suitability for typical thermal and abrasive conditions in these material groups. How does the FP4 chipbreaker affect turning results? The FP4 chipbreaker promotes short, consistent chips that improve chip control, reduce the chance of entanglement and support a better surface finish in both continuous and interrupted cuts. Is this insert suitable for finishing cuts? With its rhombic 80° geometry and corner radius 0.4 mm, the insert can perform light finishing passes while maintaining edge strength for roughing operations when required. What does the tolerance class M indicate? Tolerance class M denotes the manufacturing and dimensional tolerance level of the insert, supporting consistent fit and repeatable seating in standard CCMT toolholders. Can the insert reduce overall tooling costs? By extending stand time through the Tiger‑tec Gold grade and offering stable chip control, the insert contributes to a lower cost per part via fewer tool changes and reduced process interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade marks are cited for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
CCMT060204-FP4 WPP10G FP4 Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Gold coating and the WPP10G grade for extended tool life and stable chip formation when machining steel; order directly via Metav Werkzeuge or consult our experts for cutting data and application advice. CCMT060204-FP4 WPP10G turning and drilling indexable insert, Tiger·tec Gold, FP4 chipbreaker — Walter Tools The CCMT060204-FP4 WPP10G is a coated carbide indexable insert for turning and drilling applications, optimised for machining steel with reliable chip control and long-lasting cutting performance Coating Tiger·tec Gold for enhanced wear resistance Designed for steel machining (ISO P) Rhombic 80° insert with 0.4 mm corner radius FP4 chipbreaker for consistent chip control Longer tool life through advanced coating technology The combination of the Tiger·tec Gold coating and the WPP10G grade provides significantly improved wear resistance and edge stability compared with uncoated grades. This coated carbide formulation is engineered to withstand typical heat and abrasion encountered when machining steels (ISO P), resulting in fewer tool changes and higher machine utilisation. The effect of the coating is twofold: it reduces flank wear under thermal load and supports a stable cutting edge that maintains dimensional accuracy over longer production runs. For operations seeking predictable tool life and consistent component tolerances, this translates into lower unit costs and less unplanned downtime. Predictable chip control and improved surface quality The FP4 chipbreaker together with the rhombic 80° geometry and a 0.4 mm corner radius gives controlled chip formation and favourable cutting forces during both turning and drilling-related tasks. The 7° clearance angle reduces rubbing and helps maintain a sharp cutting action, which aids in producing a better surface finish and reduces the need for secondary operations. The modest corner radius balances strength and finish: it supports edge robustness for interrupted cuts while still permitting fine surface quality on external profiles. Explaining chipbreakers: an FP4 design alters the chip flow to break and evacuate chips reliably, lowering the risk of built-up edge and improving process stability. Certified tolerance and versatile application in steel machining Built to tolerance class M, the insert ensures reproducible seating and repeatable results in indexable toolholders; plate size 06 and thickness 02 suit standard holders for versatile shop-floor use. The WPP10G grade is specified for a broad range of steels, including unalloyed and alloyed variants, and is particularly effective where a balance of wear resistance and toughness is required. Using this insert reduces the need for multiple grades per machine, simplifying inventory and tooling decisions. Clear technical data and compatibility with common toolholders make implementation straightforward; cutting parameters should be selected according to workpiece material and machine rigidity to exploit the grade’s strengths. For production environments aiming for greater process security and longer edge life, contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts and to obtain tailored cutting data or sample recommendations. Technical Data Article number: CCMT060204-FP4-WPP10G-WALTER Designation: CCMT060204-FP4 WPP10G Series: Tiger·tec Gold Manufacturer: Walter Tools Dimensions & core data Clearance angle: 7° Corner radius: 0.4 mm Insert shape: Rhombus 80° Insert size: 06 Thickness: 02 Tolerance class: M Materials & features Grade: WPP10G Material: Coated carbide Chipbreaker: FP4 Application group: Steel (ISO P) Execution: T FAQ What materials is this insert suitable for? The CCMT060204-FP4 WPP10G insert is specified for steel machining and is optimised for the ISO P material group, covering unalloyed and alloyed steels with a good balance of wear resistance and toughness. How does the Tiger·tec Gold coating benefit cutting performance? The Tiger·tec Gold coating on the WPP10G grade reduces flank wear and improves thermal resistance, extending the insert’s effective life and maintaining edge stability during prolonged steel machining. Which chipbreaker is integrated and what is its advantage? The insert features the FP4 chipbreaker, designed to produce short, controllable chips and reliable evacuation, which enhances process stability and surface finish in turning and drilling-related operations. What does tolerance class M mean for the user? Tolerance class M indicates a mid-level precision for seating and repeatability; users can expect consistent positioning in standard toolholders, supporting reliable geometry and reproducible machining results. Hersteller: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
CCMT060204-FP4 WPP20G FP4 Wendeplatten - Walter Tools
Take advantage of a durable, coated-carbide grade and precise geometry to maintain consistent chip formation and repeatable turning results. The combination of the Tiger‑tec Gold coating with the FP4 chipbreaker and a 0.4 mm corner radius supports steady tool life and reliable finishing in steel machining; order directly via Metav Werkzeuge or consult the team for application-specific advice. CCMT060204-FP4 WPP20G — Rhombic 80° turning insert, Tiger‑tec Gold, Walter Tools The CCMT060204-FP4 WPP20G is a rhombic, indexable turning and boring insert designed for reliable steel machining with a coated-carbide grade and an integrated FP4 chipbreaker for controlled swarf evacuation. Tiger‑tec Gold coated carbide 0.4 mm corner radius for precision 7° clearance angle for stable cutting Durable coating that supports higher productivity The insert’s Tiger‑tec Gold coating is a multilayer, wear-resistant finish applied to a coated carbide substrate; this combination was developed to extend tool life under the thermal and mechanical loads typical of steel turning. As a result, the grade offers stable chip formation and consistently long cutting edge life, which reduces unplanned tool changes and helps to keep machining processes predictable. The benefit is fewer interruptions and a more efficient production rhythm. Geometry engineered for consistent chip control and surface quality With a rhombic 80° shape and an integrated FP4 chipbreaker, the geometry of the insert promotes reliable swarf control and even flank contact. The 0.4 mm corner radius supports fine surface finishes while maintaining strength at the cutting edge; the 7° clearance angle reduces rubbing on the flank face and helps prevent built-up edge when machining steels. Together these features enable reproducible part quality and fewer reworks on turned components. Optimised for steel applications according to ISO P The grade and geometry are specified for steel machining (ISO P), where heat generation and chip form require robust solutions. The WPP20G grade is a versatile choice within the Tiger‑tec Gold family: engineered to balance wear resistance and toughness so that both finishing and medium-duty roughing operations can be performed without frequent insert changes. This makes it suitable for job shops and production environments where a single insert must handle a range of steel alloys. Practical characteristics and workshop handling The insert is supplied in the CCMT060204-FP4 format with a plate thickness of 02, size 06 and tolerance class M, making it compatible with standard indexable toolholders that accept rhombic 80° inserts. The FP4 chipbreaker is designed to manage continuous and segmented chips typically encountered with steels; this reduces the risk of chip entanglement and simplifies post-process handling. For routine use, the stable edge and coating minimise inspection frequency and support predictable tool-change intervals. Contact Metav Werkzeuge for specific cutting-data recommendations, application matching or to request a tailored quotation referencing SKU CCMT060204-FP4-WPP20G-WALTER Technical data Article number: CCMT060204-FP4-WPP20G-WALTER Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Gold ISO designation: CCMT060204-FP4 WPP20G Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Tolerance class: M Special features Chipbreaker: FP4 Grade: WPP20G Coating: Tiger‑tec Gold Substrate: coated carbide Application: steel (ISO P) Plate form: Rhombus 80° Execution: T FAQ What materials is this insert suitable for? The CCMT060204-FP4 WPP20G insert by Walter Tools is specified for steel machining (ISO P) and the WPP20G grade is tuned for the thermal and chip-formation characteristics of steels. How does the FP4 chipbreaker affect machining? The FP4 chipbreaker on this insert improves chip control and encourages short, manageable chip shapes in steel turning, which supports safer, cleaner operation and consistent surface quality with the CCMT060204-FP4 WPP20G. Can this insert be used for finishing operations? Yes; the 0.4 mm corner radius and the coated-carbide grade provide a balance between edge strength and surface finish, making the insert suitable for finishing and medium-duty turning tasks. What are the key dimensions to check when selecting a toolholder? Verify that the toolholder accepts a rhombic 80° insert in size 06 with thickness 02 and tolerance class M to ensure correct seating and secure clamping of the CCMT060204-FP4 WPP20G. Where to reference the product when ordering or requesting data? Use the SKU CCMT060204-FP4-WPP20G-WALTER and the ISO designation CCMT060204-FP4 WPP20G when enquiring about tooling, spare inserts or cutting-data support from Metav Werkzeuge. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCMT060204-FP6 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a precise FP6 chipbreaker and a fine 0.4 mm corner radius for efficient, repeatable steel turning operations; order the inserts directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. CCMT060204-FP6 WPP10G turning / boring indexable insert — Walter Tools, Tiger·tec Gold coated for steel CCMT060204-FP6 WPP10G is a rhombic 80° indexable insert designed for turning and boring applications in steel, offering a balanced mix of wear resistance and toughness Tiger·tec Gold coating for long tool life FP6 chipbreaker for stable chip control Suited to ISO group P (steel) applications Rhombic 80° form with 0.4 mm corner radius Consistent performance for steel machining The combination of the Tiger·tec Gold series and the WPP10G grade provides a reliable balance between wear resistance and edge strength, optimised for steel machining (ISO group P). The coated carbide substrate delivers predictable flank wear progression and consistent cutting-edge behaviour, which reduces the need for frequent tool changes and supports steady production cycles. The FP6 chipbreaker is engineered to form short, controllable chips under typical turning parameters, improving surface finish and helping to avoid chip entanglement in automated and manual setups. Geometry and chip control that enhance productivity A rhombic 80° shape with a 7° clearance angle and a 0.4 mm corner radius enables secure cutting-edge support and good edge strength during interrupted cuts. These geometric choices translate into stable contact conditions and reliable dimensional control when profiling or facing. The insert size code (06) and thickness code (02) indicate a compact format suited to lighter holders and smaller-diameter tools where rigidity and accessibility are priorities. Together, geometry and the FP6 breaker reduce secondary operations by improving surface quality and limiting built-up edge on the insert. Practical application and selection guidance When selecting the CCMT060204-FP6 WPP10G insert for production, prioritise cutting parameters adapted to coated carbide and to the steel grade being machined; modest cuts with adequate coolant management extend tool life and preserve surface integrity. The WPP10G grade is positioned as a versatile, wear-resistant option within Walter Tools’ line-up, making it suitable for a broad range of steel types encountered in general turning and finishing tasks. For application-specific feeds and speeds or holder compatibility, Metav Werkzeuge’s technical consultants can provide matching recommendations and help integrate the inserts into existing tool systems. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools CCMT060204-FP6 WPP10G inserts into production and for current availability Technical data Article number: CCMT060204-FP6-WPP10G-WALTER Designation: CCMT060204-FP6 WPP10G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP10G Facts Clearance angle: 7° Corner radius: 0.4 mm Shape: Rhombus 80° Size: 06 Thickness: 02 Tolerance class: M Special features Chipbreaker: FP6 Coating/technology: Tiger·tec Gold Coated carbide grade Target material group: P (steel) Execution: T FAQ What materials is this insert suited for? The CCMT060204-FP6 WPP10G insert is optimised for ISO group P materials, i.e. various steels; the WPP10G grade and Tiger·tec Gold technology target typical steel machining conditions. How does the FP6 chipbreaker affect machining? The FP6 chipbreaker on this Walter Tools insert promotes short, controllable chips and improved surface quality during turning, which reduces manual chip handling and supports automated processes. What does the designation CCMT060204-FP6 indicate? The code denotes insert geometry, size and features: CCMT indicates the rhombic 80° form, 0602 relates to size and thickness coding, and FP6 specifies the chipbreaker style used on the cutting edge. Is this insert suitable for finishing and semi-finishing passes? Yes; the combination of a 0.4 mm corner radius and the WPP10G coated grade provides a good compromise between edge strength and the ability to achieve fine surface finishes in steel turning. Can the CCMT060204-FP6 WPP10G be used in interrupted cuts? The rhombic geometry and the coated grade offer robust edge support that performs reliably in moderate interrupted cutting scenarios commonly found in general turning operations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory-new item of Walter Tools.
CCMT060204-FP6 WPP20G FP6 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a precise FP6 chipbreaker and proven rhombic geometry for stable, productive steel turning—reliable tool life and consistent chip control for series production. Order directly via Metav Werkzeuge or consult our specialists for process optimisation. CCMT060204-FP6 WPP20G — Rhombic 80° turning/boring insert, FP6 chipbreaker, Walter Tools CCMT060204-FP6 WPP20G is a rhombic 80° turning and boring insert optimised for general steel machining with a Tiger·tec Gold coated, high-performance grade Tiger·tec Gold coated for long tool life FP6 chipbreaker for stable chip formation Rhombic 80° geometry for universal turning Designed for steel machining (P) Stable chip control for uninterrupted production The rhombic 80° geometry combined with the FP6 chipbreaker delivers reproducible chip shapes that reduce downtime and support consistent cycle times. The insert's geometry promotes predictable cutting forces, which helps to protect tool holders and workpiece fixtures. For machinists working across medium- to high-volume runs, the resulting reduction in rework and tool changes contributes directly to improved process efficiency and lower total machining cost. Coating and grade engineered for longer life on steel The Tiger·tec Gold coating and the WPP20G grade are developed to balance wear resistance and toughness for a wide range of steel applications. The multilayer coating improves thermal stability at high cutting speeds, while the substrate and coating combination resists abrasive wear. This results in extended service intervals and fewer insert changes during longer shift cycles, giving a measurable uplift in productivity for batch and single-pass operations. Precision edge and geometry for reliable surface quality A corner radius of 0.4 mm and a free cutting angle of 7° allow safe entry and smooth machining on typical steel grades, helping to achieve consistent surface finish and dimensional stability. The insert thickness and size classification ensure compatibility with standard CCMT toolholders, while the M tolerance class supports predictable positioning in tool pockets. This engineered edge preparation is particularly useful when turning medium-cut conditions where a balance between strength and finish is required. Practical benefits for workshop and production environments Using this insert brings practical gains: fewer tool interventions, better reproducibility and a grade suited to a broad range of steel grades as defined by ISO groups. The combination of optimised chip control and durable coating reduces process variability and supports higher metal removal rates where appropriate. For engineers specifying tooling, the clear material designation and chipbreaker type simplify grade selection and process documentation. Contact Metav Werkzeuge for application-specific recommendations or to request a cutting-data sheet tailored to Walter Tools Tiger·tec Gold inserts Technical Data Article number: CCMT060204-FP6-WPP20G-WALTER Designation: CCMT060204-FP6 WPP20G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: FP6 Facts Free cutting angle: 7° Corner radius: 0.4 mm Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Coating: Tiger·tec Gold Material/application: Steel (P) Execution: T Suitable for a wide range of steel machining tasks FAQ What materials is this insert intended for? This CCMT060204-FP6 WPP20G insert is designed primarily for steel machining (ISO group P), offering a balance of wear resistance and toughness for typical unalloyed and alloyed steels. How does the FP6 chipbreaker help in production? The FP6 chipbreaker on the WPP20G grade controls chip formation to produce consistent, manageable chips, which reduces interruptions and supports stable machining with Walter Tools inserts. Is the grade suitable for higher cutting speeds? The Tiger·tec Gold coating of the WPP20G grade enhances thermal stability and wear resistance, making the insert appropriate for elevated cutting speeds in steel applications when used with compatible cutting data. Which toolholders are compatible with this insert geometry? Rhombic 80° CCMT toolholders that accept CCMT060204-format inserts are compatible; the plate size and thickness correspond to standard CCMT pockets for reliable clamping and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com