Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
CCMT060204-FW4 WKP01G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise FW4 chip control and robust rhombic 80° geometry for stable, productive turning of steel and cast iron — order or request advice through Metav Werkzeuge for tailored recommendations. CCMT060204-FW4 WKP01G Turning indexable insert — Tiger·tec Gold, for steel and cast iron (Walter Tools) A CCMT060204-FW4 WKP01G indexable insert engineered for efficient turning operations on steel and cast iron in industrial machining. Tiger·tec Gold coating Suitable for steel and cast iron Rhombic 80° geometry 7° clearance angle 0.4 mm corner radius, FW4 chipbreaker Engineered for consistent cutting performance The combination of the Tiger·tec Gold technology and the WKP01G grade gives a reliable balance between wear resistance and toughness, optimised for materials in groups P and K (steel and cast iron). The coated carbide substrate and multi-layer surface treatment reduce abrasive wear and extend edge life, which translates into fewer index changes and more productive cycle times. The rhombic 80° geometry and tolerance class M ensure dimensional stability during turning and support predictable tool behaviour under repetitive loads, making the insert suitable for serial production and mixed-batch machining alike. Reliable chip control and improved surface quality A dedicated FW4 chipbreaker combined with a 0.4 mm corner radius supports controlled chip formation, especially during longitudinal turning and medium-depth cuts. This chip control reduces the risk of entangling swarf, lowers secondary finishing time and contributes to a more consistent surface finish on workpieces. The 7° clearance angle reduces rubbing at the flank face and helps maintain a steady cutting edge temperature, which in turn improves reproducibility and reduces the likelihood of built-up edge in many steel grades. Productivity gains and process security in everyday workshops The designation CCMT060204-FW4 WKP01G identifies a standard, easily indexable insert format compatible with common toolholders, allowing quick index changes and straightforward stocking. The grade is developed for a broad material spectrum, delivering process security and long tool life under varied cutting conditions. The robust design supports both roughing and finishing passes where consistent tool performance is required. If additional information or cutting-data suggestions are needed, technical advice is available from Metav Werkzeuge by email or phone to support integration into existing machining processes. Contact Metav Werkzeuge for application-specific recommendations on the CCMT060204-FW4 WKP01G insert — technical consultation and ordering support available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: CCMT060204-FW4-WKP01G-WALTER Article designation: CCMT060204-FW4 ISO designation: CCMT060204-FW4 WKP01G Series: Tiger-tec Gold Grade: WKP01G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Chipbreaker: FW4 Geometry: Rhombic 80° Material groups: P / K (steel, cast iron) Coating / grade: WKP01G (coated carbide) Version: T FAQ What materials is this insert suited for? The CCMT060204-FW4 WKP01G insert is optimised for material groups P and K, i.e. steel and cast iron, with the Tiger·tec Gold grade tailored to manage typical heat and chip behaviour in these materials. Which geometry and chip control does the insert offer? The insert features a rhombic 80° geometry with a dedicated FW4 chipbreaker, providing reliable chip formation and good accessibility for a range of turning tasks. How does the corner radius affect cutting performance? The 0.4 mm corner radius increases edge strength for interrupted or heavier cuts while still allowing acceptable surface finish during finishing passes. Is the insert suitable for both roughing and finishing? Yes. The combination of the WKP01G grade and the FW4 chipbreaker supports both roughing and finishing operations, depending on cutting parameters and toolholder setup. How to obtain cutting data or technical advice? Cutting parameters and application advice can be provided by Metav Werkzeuge; contact via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision metal-cutting tools and forms part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
CCMT060204-FW4 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise FW4 chip control and compact rhombic geometry for consistent turning performance; order directly via Metav Werkzeuge or contact the technical team for tailored advice. CCMT060204-FW4 WPP10G Turning insert for steel — Walter Tools The CCMT060204-FW4 WPP10G is an indexable turning insert designed for general steel machining, offering a Tiger·tec Gold coated carbide grade that balances wear resistance and toughness for productive metalcutting. Tiger·tec Gold coating for extended tool life WPP10G grade for balanced wear and toughness FW4 chipbreaker for controlled chip formation Rhombic 80° shape with 0.4 mm corner radius Higher productivity through reliable wear resistance and chip control The combination of Tiger·tec Gold coating and the WPP10G grade provides a reproducible cutting edge that reduces downtime and extends edge life during serial turning of steel. The coated carbide composition delivers improved resistance to abrasive and adhesive wear typical in steel turning, while the specifically designed FW4 chipbreaker promotes stable chip formation. This results in fewer interruptions for chip management and more consistent cycle times, which directly supports higher throughput and predictable tool-change intervals. Geometry that improves surface finish and tool engagement The Rhombic 80° insert form, together with a 7° free angle and a small 0.4 mm corner radius, yields a favourable engagement geometry for finishing and light- to medium-duty turning operations. The modest corner radius helps to maintain a fine surface quality without compromising strength at the cutting edge. The insert’s geometry supports stable cutting forces and reduces chatter risk when used with appropriate toolholder rigidity and turning parameters, enhancing both surface quality and process reliability. Practical advantages of the grade and chipbreaker in steel applications The WPP10G grade is engineered for steel (ISO P) and offers a balanced combination of wear resistance and toughness that suits a wide range of unalloyed and alloyed steels. The FW4 chipbreaker promotes segmented or curled chips depending on feed and depth of cut, improving evacuation and reducing the chance of built-up edge. For users seeking predictable performance across varying steel families, this insert grade simplifies tooling choices and supports consistent component quality in production environments. Integration into existing turning setups and process support With a compact size code and standard CCMT pocket form, the insert fits common toolholders and can be deployed quickly within established turning cells. Its coated carbide substrate and the Tiger·tec Gold technology contribute to repeatable edge condition across batches, facilitating process stabilisation. For integrators and production engineers, the insert’s combination of edge stability, chip control and compatible geometry makes it an efficient option for both finishing passes and light semi-finishing operations in steel components. Contact Metav Werkzeuge for application-specific recommendations and availability of the Walter Tools CCMT060204-FW4 WPP10G turning insert — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: CCMT060204-FW4-WPP10G-WALTER Article designation: CCMT060204-FW4 WPP10G Manufacturer: Walter Tools Product type: Turning insert (indexable) Core measurements Free angle: 7° Corner radius: 0.4 mm Insert shape: Rhombic 80° Size code: 06 Thickness code: 02 Tolerance class: M Execution: T Materials & features Coating / series: Tiger·tec Gold Grade: WPP10G Substrate: Coated carbide Chipbreaker: FW4 Application group: Steel (ISO P) FAQ What materials is this insert suitable for? The CCMT060204-FW4 WPP10G turning insert from Walter Tools is designed primarily for machining steel in accordance with ISO P classifications; the WPP10G grade balances wear resistance and toughness for a broad range of steels. How does the Tiger·tec Gold coating benefit tool life? Tiger·tec Gold coating on the Walter Tools WPP10G grade improves resistance to abrasive and adhesive wear, providing a more durable cutting edge and more consistent performance over longer tool life in steel turning. What machining tasks suit this insert geometry? The rhombic 80° geometry with a 0.4 mm corner radius and 7° free angle is well suited to finishing and light to medium turning operations where a fine surface finish and stable cutting forces are required. Does the FW4 chipbreaker require special feeds or speeds? The FW4 chipbreaker is designed to provide controlled chip formation across typical finishing and semi-finishing parameter windows for steel; specific feeds and speeds depend on material grade, machine rigidity and toolholder selection. Is the insert compatible with standard CCMT toolholders? Yes, the CCMT060204-FW4 form corresponds to standard CCMT pockets and can be used with compatible indexable turning toolholders designed for that insert geometry. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060204-FW4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the proven combination of economical cutting performance and consistent edge life offered by the Tiger·tec Gold grade; the CCMT060204-FW4 WPP20G provides stable chip formation and reliable chip control for steel turning — order the insert through Metav Werkzeuge or contact our consultants for precise application advice CCMT060204-FW4 WPP20G turning insert by Walter Tools — Tiger·tec Gold, FW4 chipbreaker CCMT060204-FW4 WPP20G is a rhombic 80° turning insert designed for efficient steel machining and dependable chip control in serial production Tiger·tec Gold coated carbide grade WPP20G FW4 chipbreaker for reliable chip control Rhombic 80° geometry, 0.4 mm corner radius Designed for steel machining, 7° relief Consistent productivity thanks to Tiger·tec Gold grade The Tiger·tec Gold coating combined with the WPP20G grade delivers a balance of wear resistance and toughness that suits a wide range of steel machining tasks. This combination supports stable chip formation and lengthens the interval between indexings, which reduces machine downtime and improves process economy. The coated carbide substrate is engineered for predictable edge behaviour, enabling stable cutting performance even under fluctuating cutting conditions. For manufacturing environments that prioritise throughput and repeatability, this insert offers a cost-effective route to sustained productivity. Better surface finish and fewer interruptions through controlled chip flow The FW4 chipbreaker geometry is optimised for chip control during continuous and interrupted turning of steels. Reliable chip separation improves tool life and reduces the risk of chip re-cutting or built-up edge, which helps maintain a consistent surface quality. In practical terms, this means fewer stops for clearing chips and less operator intervention, translating into smoother production runs and improved part consistency. The engineered chipformer supports efficient evacuation for a wide range of feeds and depths of cut typical in ISO P applications. Geometry tuned for versatile turning tasks A rhombic 80° shape with a 0.4 mm corner radius and 7° relief provides a versatile geometry that covers finishing to light-medium roughing operations in steel. The modest corner radius balances edge strength and surface integrity, while the relief angle assists in reducing rubbing and heat build-up at the cutting edge. The insert conforms to ISO P material class standards for steel machining, so the functional design helps achieve consistent results across unalloyed and alloyed steels where thermal and chip-formation behaviour is demanding. Practical integration and repeatable results in production The CCMT form factor (06) and a plate thickness of 02 make the insert compatible with a wide range of standard turning tool holders, supporting straightforward integration into existing toolsets. The tolerance class M and execution T ensure dimensional consistency for predictable clamping and repeatable positioning, which is essential for high-volume production. Combined with Tiger·tec Gold surface engineering and the FW4 chipbreaker, the insert provides a reliable solution for workshops seeking lower variance in tool life and fewer process deviations. If additional machining parameters are required, Metav Werkzeuge can supply detailed recommendations and application data. For reliable Tiger·tec Gold performance, request the CCMT060204-FW4 WPP20G from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and availability Technical Data Article number: CCMT060204-FW4-WPP20G-WALTER Designation: CCMT060204-FW4 WPP20G Type: Turning insert (indexable) Manufacturer: Walter Tools Series: Tiger-tec Gold Core Data Grade: WPP20G Chipbreaker: FW4 Insert shape: Rhombic 80° Relief angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Tolerance class: M Execution: T Material group: P (Steel) Special features Coated carbide (Tiger·tec Gold technology) Optimised for steel machining (ISO P) Stable chip formation Broad material coverage for general steel applications FAQ What materials is this insert suitable for? The CCMT060204-FW4 WPP20G insert from Walter Tools is optimised for steel (ISO P) and its Tiger·tec Gold coating supports the thermal and chip-formation characteristics typical of unalloyed and alloyed steels. How does the FW4 chipbreaker improve machining? The FW4 chipbreaker on the CCMT060204-FW4 WPP20G promotes controlled chip flow and easier evacuation, which reduces interruptions and helps maintain a consistent surface finish during turning operations. Which operations are best for a 0.4 mm corner radius? A 0.4 mm corner radius on this rhombic insert provides a compromise between edge strength and surface quality, making it suitable for finishing and light to medium roughing of steel components. Is this insert compatible with common tool holders? The CCMT06 form and 02 thickness are standard dimensions that fit most holders designed for CCMT inserts; compatibility depends on the specific holder clamping system and should be confirmed before use. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer (Walter Tools).
CCMT060204-FW4 WSM10S WSM10S Wendeplatten - Walter Tools
Taking advantage of a Tiger‑tec Silver coated grade and an FW4 chipbreaker, this indexable insert delivers stable cutting in stainless steel and heat‑resistant superalloys while maintaining consistent edge life; order details and expert advice are available through Metav Werkzeuge for straightforward integration into production. CCMT060204-FW4 WSM10S Drehwendeschneidplatte — Tiger‑tec Silver, for stainless steel and superalloys | Walter Tools A CCMT060204-FW4 WSM10S indexable turning insert engineered for demanding machining of stainless steel and nickel‑based superalloys, combining a stable cutting geometry with a heat‑resistant coated grade. Tiger‑tec Silver coating for wear resistance Optimised FW4 chipbreaker for stable chips Suitable for stainless steel and superalloys Rhombic 80° form with 0.4 mm nose radius Reliable cutting performance for tough materials The combination of a WSM10S coated carbide grade and the Tiger‑tec Silver technology is designed to resist thermal and mechanical loading during heavy turning of stainless steel and similar materials. The insert’s Rhombic 80° shape and 7° clearance support predictable cutting forces and access to shoulder and profile operations, while the 0.4 mm nose radius provides a balance between surface finish and edge strength. For machining applications where material toughness and heat build‑up can shorten tool life, this configuration promotes a controlled, repeatable process and reduces unscheduled tool changes. Stable chip formation and extended edge life The integrated FW4 chipbreaker is configured to produce short, manageable chips in sticky materials, reducing the risk of entanglement and improving surface integrity. Coating and grade selection target both oxidation resistance and adhesive wear suppression; together they enable longer durable cutting intervals and a more reliable cycle time. For production environments that require consistent part quality, the insert’s geometry and chip control support process stability and reduce downstream rework. Seamless fit into productive turning setups As an indexable insert with the common CCMT designation, this item is compatible with a wide range of compatible toolholders, simplifying stocking and changeover. The modest nose radius helps achieve good surface finish values without compromising tool robustness, and the rhombic form supports interrupted cuts and varied approach angles. When integrated within systematic tool management, this solution contributes to higher throughput and predictable tooling costs while maintaining workpiece quality. For ordering or detailed application advice on the CCMT060204-FW4 WSM10S from Walter Tools, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss cutting data and holder compatibility Technical data SKU: CCMT060204-FW4-WSM10S-WALTER Designation: CCMT060204-FW4 WSM10S Manufacturer: Walter Tools Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Tolerance class: M Material and features Coating: Tiger‑tec Silver Grade: WSM10S (coated carbide) Chipbreaker: FW4 Plate form: Rhombic 80° Series: Tiger‑tec Silver Material suitability: stainless steel, superalloys (S / M) FAQ What materials is this insert best suited for? The CCMT060204-FW4 WSM10S from Walter Tools is specified for stainless steel and heat‑resistant superalloys; the WSM10S grade and Tiger‑tec Silver coating address thermal loading and adhesion tendencies. How does the FW4 chipbreaker affect machining? The FW4 chipbreaker on this insert promotes short, controlled chips in sticky and ductile materials, improving workplace safety and surface quality during turning operations. Can this insert be used for finishing passes? With a 0.4 mm nose radius and the Rhombic 80° form, the insert is suitable for combined profile and semi‑finish operations where a compromise between edge strength and surface finish is required. Is the insert compatible with standard CCMT toolholders? The CCMT designation indicates compatibility with common toolholder systems for indexable turning inserts, enabling straightforward integration into standard turning setups. What does the Tiger‑tec Silver coating provide? Tiger‑tec Silver enhances heat resistance and wear performance, helping to stabilise the cutting edge under the elevated temperatures typical when machining stainless steel and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory‑new product of the manufacturer.
CCMT060204-FW4 WSM20S FW4 Wendeplatten - Walter Tools
Take advantage of the combination of high thermal resistance, stable chip formation and precise edge geometry to increase process security on difficult-to-machine materials; order the CCMT060204-FW4 WSM20S indexable insert directly via Metav Werkzeuge or ask the consultants for technical advice. CCMT060204-FW4 WSM20S indexable turning insert — Tiger·tec Silver for stainless steels and superalloys | Walter Tools CCMT060204-FW4 WSM20S is an indexable turning insert designed for reliable machining of heat-resistant superalloys and rostfreie Stähle in demanding turning operations. Tiger·tec Silver coating for heat resistance WSM20S grade for stainless steels and superalloys FW4 chipbreaker for controlled chip formation 7° relief and 0.4 mm nose radius for repeatable precision High-performance grade for demanding materials The combination of Tiger·tec Silver coating and the WSM20S carbide grade delivers a balance of thermal resistance and edge stability that is geared towards rostfreie Stähle and heat-resistant superalloys. This behaviour reduces the tendency for built-up edge and supports higher cutting parameters compared with uncoated grades. For production environments where cutting-edge robustness and predictable wear are key, the coated substrate enables more stable cycles and fewer unscheduled tool changes, improving overall throughput. Consistent chip control and surface quality The insert’s FW4 chipbreaker is engineered for reliable chip control, producing short, consistent chips that clear the cutting zone and reduce rework. Combined with the 7° relief and a 0.4 mm nose radius, the geometry promotes a controlled contact zone and stable cutting forces, so surface finish and dimensional repeatability are improved. For operators new to superalloys or rostfreie Stähle, this geometry simplifies parameter tuning by offering a forgiving window for feed and speed adjustments. Productivity through edge life and process security As an indexable solution, the insert supports rapid corner indexing and cost-efficient use of carbide grades, translating into lower tool-change times and predictable replacement intervals. The coated carbide construction contributes to a stable cutting edge with prolonged life on challenging batches, which in turn reduces machine downtime and variability between workpieces. For manufacturing lines processing mixed lots of rostfreie Stähle and high-temperature alloys, this insert promotes consistent output and fewer interruptions. Practical compatibility and selection guidance The item is supplied in the CCMT specification with a rhombic 80° form and thickness 02, making it compatible with standard tooling systems accepting the CCMT format. The combination of rhombus 80° seating and the specified geometry supports a wide range of turning operations, from medium to heavy cuts in demanding materials. When selecting an insert, match the holder geometry and clamping type to the CCMT form to ensure correct seating and reliable coolant access; Metav Werkzeuge can assist with matching holders and recommended cutting parameters. For process-critical turning in rostfreie Stähle and superalloys, request a tailored recommendation for the Walter Tools Tiger·tec Silver inserts from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss optimal grades and holder compatibility. Technical Data Article number: CCMT060204-FW4-WSM20S-WALTER Article designation: CCMT060204-FW4 Full designation: CCMT060204-FW4 WSM20S Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM20S Chipbreaker: FW4 Shape: Rhombus 80° Size: 06 Thickness: 02 Nose radius: 0,4 Relief angle: 7° Tolerance class: M Material suitability: S / M Application suitability: rostfreie Stähle Numbers / Core Technical Data Nose radius: 0,4 mm Relief angle: 7° Plate size: 06 Thickness code: 02 Tolerance: M Special features / Versions Coating: Tiger·tec Silver (coated carbide) Carbide grade: WSM20S Chip control: FW4 chipbreaker Geometry: rhombic 80° insert form Execution: T FAQ Which materials are best suited for this insert? The CCMT060204-FW4 WSM20S insert from Walter Tools is optimised for rostfreie Stähle and heat-resistant superalloys (ISO groups M and S), providing good thermal resistance and stable cutting edges for such materials. Is the insert compatible with standard CCMT tool holders? Yes, the insert follows the CCMT format and the rhombic 80° seating, so it is compatible with holders designed for CCMT inserts; ensure correct clamping and seating for optimal performance. What does the FW4 chipbreaker achieve in practice? The FW4 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip-related interruptions during turning operations. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating enhances heat resistance and wear behaviour, extending edge life on demanding workpieces and contributing to more predictable process windows with fewer unscheduled changes. The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCMT060204-FW4 WSM30S FW4 Wendeplatten - Walter Tools
Take advantage of the combination of high-temperature resistance, stable chip control and a compact 0.4 mm corner radius for consistent turning results; order the inserts directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCMT060204-FW4 WSM30S — Turning indexable insert, Tiger·tec Silver, 7° clearance (Walter Tools) The CCMT060204-FW4 WSM30S is a rhombic 80° turning insert designed for demanding machining of rostfreier Stahl and heat-resistant superalloys, offering a robust chipbreaker and a geometry optimised for reliable edge life. Tiger·tec Silver coating technology Suitable for rostfreier Stahl and superalloys 0.4 mm corner radius for consistent finishes FW4 chipbreaker for controlled chip flow High-performance cutting for rostfreier Stahl and superalloys The insert’s WSM30S grade, part of the Tiger·tec Silver family, is formulated for applications in ISO groups M and S. That means reliable performance when machining rostfreier Stahl (ISO group M) and heat-resistant superalloys or titanium (ISO group S), where material toughness and heat generation challenge tool life. The chosen carbide substrate with a coated surface promotes a controlled cutting edge temperature and reduces the tendency for built-up edge, which in turn supports longer tool life and fewer interruptions in production. For manufacturing environments that demand repeatable, high-quality surfaces on demanding materials, this cutting grade balances hardness and toughness to extend productive cutting intervals. Stable edge life and controlled chip formation with Tiger·tec Silver The Tiger·tec Silver coating enhances thermal resistance and wear behaviour; coupled with the FW4 chipbreaker, the insert delivers predictable chip forms and efficient evacuation. A well-controlled chipbreak reduces the risk of entanglement and improves process stability, particularly in interrupted cuts or variable feed conditions. The result is lower scrap rates and more consistent component tolerances, which directly supports cost-effective machining cycles. In practice, the coating’s multi-layer structure and optimised friction characteristics help maintain a stable cutting edge even under elevated temperatures typical for rostfreier Stahl and superalloy machining. Geometry and handling geared to reliable turning operations The rhombic 80° shape and the 7° clearance angle combine to provide versatile approach angles for common turning operations, while the 0.4 mm corner radius offers a balance between edge strength and surface finish. The designation 06 for insert size and 02 for thickness correspond to compact inserts that fit a broad range of standard turning toolholders, enabling straightforward integration into existing tool setups. The FW4 groove geometry is designed for reliable chip control across a variety of feed and depth-of-cut parameters, meaning fewer adjustments on the machine and less downtime between setups. For workshops aiming to improve process reliability, this insert geometry supports both productivity and repeatability. For reliable machining of rostfreier Stahl and superalloys with Walter Tools quality, contact Metav Werkzeuge for application advice and supply of the CCMT060204-FW4 WSM30S insert Technical data Article number: CCMT060204-FW4-WSM30S-WALTER SKU: CCMT060204-FW4-WSM30S-WALTER Product: Drehwendeschneidplatte / Turning indexable insert Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WSM30S Core data Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Special features Chipbreaker: FW4 Shape: Rhombus 80° Material suitability: S / M (superalloys/titanium and rostfreier Stahl) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The CCMT060204-FW4 WSM30S insert is designed for rostfreier Stahl (ISO group M) and heat-resistant superalloys or titanium (ISO group S), reflecting the WSM30S grade’s intended use. How does the Tiger·tec Silver coating benefit machining? Tiger·tec Silver improves thermal resistance and wear behaviour, helping the WSM30S grade maintain a stable cutting edge and consistent chip formation during demanding turning operations. Which chipbreaker is integrated and what is its effect? The FW4 chipbreaker is integrated to produce controlled chips and reliable evacuation, reducing the risk of chip entanglement and improving process stability. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius provides a compromise between edge strength and surface quality, helping to achieve good surface finishes while protecting the cutting edge under higher loads. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes; there is no connection between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
CCMT060204-MK4 WKK10S WKK10S Wendeplatten - Walter Tools
Take advantage of a high-performance combination of Tiger·tec Silver coating and a chipbreaker optimised for cast iron to increase process reliability and tool life; the robust geometry ensures consistent surface quality and stable wear behaviour — order via Metav Werkzeuge or consult our advisors for application-specific recommendations. CCMT060204-MK4 WKK10S – Indexable Turning Insert (Rhombic 80°, 7° relief) by Walter Tools The CCMT060204-MK4 WKK10S is an indexable turning and boring insert engineered for abrasive cast iron machining, offering a combination of wear-resistant coating and a controlled-chip geometry for stable production. Tiger·tec Silver coated for long tool life Optimised for abrasive cast iron machining Rhombic 80° shape for versatile turning Chipbreaker MK4 for reliable chip control Maximise cutting efficiency in cast iron turning The combination of a coated carbide base and the Tiger·tec Silver technology delivers a robust cutting edge that copes with the high abrasion typical of cast iron. The WKK10S grade is tuned for short, brittle chips and abrasive wear resistance, which leads to longer intervals between insert changes and fewer unplanned stoppages. With a focus on measurable performance, the insert’s geometry reduces flank wear and maintains dimensional stability on repetitive turning cycles, contributing to predictable cycle times and improved component yield. The design supports higher cutting parameters where process stability allows, translating into a tangible increase in productivity for batch and serial production. Improved surface quality and consistent chip formation The chipbreaker MK4 and rhombic 80° form provide controlled chip flow and secure edge engagement, resulting in more consistent surface finishes and fewer interruptions from poor chip evacuation. The 7° relief minimises rubbing and heat build-up at the flank, while the corner radius 0.4 mm balances edge strength with the ability to achieve fine surface roughness on interrupted or continuous cuts. This geometry is particularly advantageous where repeatable part quality is required, such as cylinder bores or mating faces, because it reduces the need for secondary finishing and supports stable tool life across a production run. Practical integration and application guidance Designed to fit standard CCMT toolholders, the insert’s format and tolerance class M ensure consistent seating and repeatability in conventional turning setups. The grade is explicitly intended for the machining of cast iron, matching the abrasive wear profile and chip behaviour of these materials. For new applications, start with conservative feeds and speeds to determine the optimal combination for a specific cast iron grade; the insert’s stability then allows incremental increases in cutting parameters. For technical clarifications regarding holder compatibility or optimisation strategies, Metav Werkzeuge can provide detailed guidance and application data. Contact Metav Werkzeuge for tailored machining advice on Walter Tools Tiger·tec Silver inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 to align the right insert grade and geometry with the process conditions at hand Technical Data Article number: CCMT060204-MK4-WKK10S-WALTER SKU / designation: CCMT060204-MK4 WKK10S Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT060204-MK4 WKK10S Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Plate size designation: 06 Thickness designation: 02 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKK10S Chipbreaker: MK4 Plate form: Rhombus 80° Base material: coated carbide Application: optimised for cast iron machining Execution code: T FAQ What materials is this insert suitable for? The CCMT060204-MK4 WKK10S insert is optimised for machining cast iron and is designed to handle the abrasive wear and short-chip behaviour typical of those materials. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver enhances wear resistance and thermal stability on the cutting edge; in the WKK10S grade this leads to longer tool life and more consistent machining results on abrasive cast iron. Which chipbreaker is fitted and what benefit does it offer? The insert features the MK4 chipbreaker, which ensures controlled chip formation and reliable evacuation, supporting uninterrupted production and improved surface finish. Is the insert compatible with standard CCMT toolholders? Yes, the insert follows the CCMT indexable insert standard and is intended for use in standard CCMT-compatible turning and boring toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.*
CCMT060204-MK4 WKK20S WKK20S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the MK4 chipbreaker yields stable chip formation and prolonged tool life for demanding cast-iron turning operations; reliable geometry and a 0.4 mm corner radius support consistent surface finish and productive machining — order directly via Metav Werkzeuge or request application advice from our consultants. CCMT060204-MK4 WKK20S – turning and boring indexable insert, Tiger·tec Silver, for cast iron (Walter Tools) The CCMT060204-MK4 WKK20S is a coated carbide indexable insert engineered for productive turning and boring in abrasive cast-iron applications, combining a robust chipbreaker and an 80° rhombic geometry for versatile toolpaths. Tiger·tec Silver coating for extended tool life MK4 chipbreaker optimised for cast iron machining Rhombic 80° form for versatile turning and boring 0.4 mm corner radius for consistent surface quality Maximise productivity with a coating tuned to cast iron The coated carbide grade, based on Tiger·tec Silver technology, is formulated to resist the abrasive wear typical of cast-iron workpieces. This results in stable tool life and fewer insert changes during production runs, which improves overall process efficiency. The insert’s coating and substrate pairing are particularly effective where chopped, breaking chips are generated; the result is more predictable machining cycles and reduced unscheduled downtime. Chip control and geometry for reliable machining Equipped with the MK4 chipbreaker, the insert provides controlled chip formation and evacuation in interrupted and continuous cuts typical of cast-iron components. The rhombic 80° shape offers a favourable approach angle for general turning and boring, while the 0.4 mm corner radius supports repeatable surface finish without compromising strength at the cutting edge. These design elements together improve dimensional stability and reduce the need for finishing passes. Industrial suitability and process advantages Classified for ISO group K (cast iron), the insert is engineered to perform under the specific demands of abrasive, brittle materials, offering reliable edge security and consistent cutting behaviour. The M tolerance class and the insert dimensions ensure compatibility with common toolholders and turning systems used in CNC lathes and boring heads, enabling rapid changeover and straightforward tool management in high-mix or high-volume environments. Application focus and operator benefits In production settings where throughput and repeatability matter, the insert supports shorter cycle times and reproducible part quality. The combination of advanced coating technology and a dedicated chipbreaker reduces edge wear and improves surface integrity, which helps meet quality targets with fewer corrective steps. For shops machining cast-iron parts, the insert is a practical choice for maintaining productivity while controlling scrap rates. Contact Metav Werkzeuge for tailored application advice and to place orders for Walter Tools inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: CCMT060204-MK4-WKK20S-WALTER Designation: CCMT060204-MK4 WKK20S Product type: Turning and boring indexable insert (coated carbide) Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Shape: Rhombic 80° Insert size: 06 Thickness: 02 Tolerance class: M Chipbreaker: MK4 Series: Tiger·tec Silver Materials & applications Coated carbide grade: WKK20S (Tiger·tec Silver technology) Suitable for: cast iron (ISO group K) Typical use: turning, boring, interrupted cuts Benefits: abrasion resistance, stable chip formation, reliable edge life FAQ What materials is this insert designed for? The CCMT060204-MK4 WKK20S from Walter Tools is specifically developed for machining cast iron (ISO group K) and is tuned to resist the abrasive wear typical of such materials. How does the MK4 chipbreaker affect machining? The MK4 chipbreaker on this insert promotes controlled chip formation and evacuation during turning and boring, improving process stability and reducing the risk of chip-related interruptions. Which geometry advantages does the rhombic 80° form provide? The 80° rhombic form offers a versatile approach angle suitable for both general turning and boring tasks, delivering a balance between strength and accessibility to the cutting zone. Is the insert compatible with standard toolholders? The insert follows common indexable insert dimensions and the M tolerance class, making it compatible with standard holders designed for CCMT-format turning inserts. What performance improvements are expected from the Tiger·tec Silver series? Tiger·tec Silver coating enhances wear resistance and heat protection, which together extend tool life and contribute to more consistent surface quality on cast-iron components. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
CCMT060204-MM4 WMP20G WMP20G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a proven MM4 chipbreaker and compact Rhombic 80° geometry to keep stainless-steel turning processes productive and reliable; order directly via Metav Werkzeuge or consult our specialists for tailored advice. CCMT060204-MM4 WMP20G — Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte for stainless steel by Walter Tools A CCMT060204-MM4 WMP20G indexable insert designed for robust stainless-steel turning and boring, offering consistent chip control and long tool life. Tiger·tec Gold coating for long tool life Optimised MM4 chipbreaker for stable chips Rhombic 80° shape for versatile turning 7° clearance and 0.4 mm corner radius Durable coating that extends cutting intervals and reduces regrinds The combination of the Tiger·tec Gold technology and a coated carbide substrate delivers a balance between wear resistance and edge stability specifically for machining stainless steel (ISO group M). The hard, multi-layer coating reduces flank wear and supports higher sustained cutting temperatures, which in turn lengthens productive intervals between tool changes. For workshop managers seeking lower process interruptions and improved overall equipment effectiveness, this coated grade contributes directly to more predictable tool life and reduced downtime. Geometry engineered for versatile turning and secure seating The Rhombic 80° insert form with a corner radius of 0.4 mm and 7° clearance supports a wide range of turning tasks from finishing to medium cuts. The rhombic geometry provides access to varied toolholder orientations, while the modest corner radius helps maintain edge strength under intermittent or heavier engagement. As a result, the insert enables machining sequences that demand both accessibility and repeatable surface finish without frequent insert replacement. Controlled chip formation for process stability The MM4 chipbreaker is tuned for the tendencies of stainless steel—sticky chips, built-up edge and thermal sensitivity—by promoting short, controlled chip segments and reliable evacuation. Predictable chip behaviour reduces the risk of surface damage and supports automated or semi-automated operations where consistent chip flow is essential. In production where cycle time and machine uptime are critical KPIs, the enhanced chip control contributes to measurable gains in throughput and operator safety. Practical compatibility and application notes This turning grade is intended for work on stainless steel and is best used under conditions that moderate heat generation and avoid excessive feed spikes. The insert is supplied in the CCMT060204-MM4 format which suits a broad range of toolholders and clamping systems. When specifying tooling for a series of stainless-steel components, pairing this indexable insert with stable tool posts and appropriate coolant strategies will help exploit the Tiger·tec Gold benefits fully, yielding consistent surface quality and dimensional stability. For reliable stainless-steel turning with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for personalised selection and immediate technical support by phone or email. Technical Data Article number: CCMT060204-MM4-WMP20G-WALTER Designation: CCMT060204-MM4 ISO designation: CCMT060204-MM4 WMP20G Brand: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Plate size: 06 Plate thickness: 02 Special features Grade/variety: WMP20G (Tiger·tec Gold) Chipbreaker: MM4 Plate shape: Rhombus 80° Suitable for: stainless steel (M) Coated carbide FAQ What materials is this insert intended to machine? The CCMT060204-MM4 WMP20G is specified for stainless steel (ISO group M) and is designed to maintain stable cutting edges and chip control in those materials. How does the MM4 chipbreaker affect process performance? The MM4 chipbreaker produces short, controllable chips that improve evacuation and reduce the risk of built-up edge, thereby supporting steadier cycle times and surface quality for stainless-steel turning. What is the advantage of the Tiger·tec Gold grade? The Tiger·tec Gold coating balances thermal and abrasive resistance, which helps to extend tool life and maintain edge integrity during hotter cutting conditions typical of stainless-steel machining. Which toolholders are compatible with the CCMT060204-MM4 format? The CCMT format is widely supported; selecting a rigid, well-clamped toolholder compatible with CCMT inserts ensures repeatable positioning and helps to exploit the insert’s geometry and coating benefits. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are used here for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory-new product from the manufacturer.
CCMT060204-MM4 WMP20S WMP20S Wendeplatten - Walter Tools
The combination of the Tiger·tec Silver coating and the WMP20S grade ensures secure chip formation and extended edge life when machining stainless steels; this results in consistent surface quality and predictable tool performance. Choose the CCMT060204-MM4 WMP20S for efficient, repeatable machining and order the item directly via Metav Werkzeuge or consult the company's specialists for application advice. CCMT060204-MM4 WMP20S indexable insert for turning and drilling by Walter Tools — Tiger·tec Silver, optimised for stainless steel CCMT060204-MM4 WMP20S is a rhombic 80° indexable insert designed for turning and bore-milling tasks in stainless steels and similar demanding materials Tiger·tec Silver coating for improved wear resistance Optimised for machining stainless steel (ISO group M) Rhombic 80° form with 0.4 mm nose radius MM4 chipbreaker for stable chip control Consistent performance on stainless steels with a high-performance grade The Walter WMP20S grade, based on the Tiger·tec Silver technology, is a coated carbide designed specifically for machining stainless steel (ISO group M). The combination of a modern coating and substrate composition reduces edge wear under adhesive and heat-intensive cutting conditions. As a result, operators benefit from stable chip formation and improved process reliability, which in turn reduces the need for frequent tool changes and supports longer uninterrupted production runs. The technical focus on adhesion resistance and thermal stability makes this grade suitable for medium to heavy-duty turning operations where workpiece material tends to work-harden. Geometry and chip control that improve surface quality and repeatability The insert’s rhombic 80° form and a 0.4 mm nose radius provide a balance between robust cutting edge and acceptable surface finish for general turning and finishing passes. The 7° relief angle helps to reduce contact on the flank face, and the MM4 chipbreaker is engineered to produce predictable, controlled chips when cutting ductile and sticky stainless alloys. This geometry supports repeatable dimensions and consistent surface quality, particularly on long runs where tool behaviour must remain uniform. The insert’s design also simplifies tool selection for versatile turning applications. Productivity gains and process security in series production Using Walter Tools grade inserts like this model contributes to measurable productivity improvements: fewer interruptions for insert changes, reduced scrap from unstable cutting, and consistent part quality. The coated grade and chip control also help to protect the cutting edge during transient conditions, giving greater margin against built-up edge. In production environments where reproducibility and tool life matter, the insert supports stable cycle times and better overall equipment effectiveness. For application-specific recommendations and to ensure optimal cutting data, Metav Werkzeuge’s technical advisors are available to provide guidance on feeds, speeds and tooling setups. For reliable machining of stainless components with proven Tiger·tec Silver performance, contact Metav Werkzeuge for ordering and technical consultation via info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge supplies genuine Walter Tools consumables and application expertise. Technical data Article number: CCMT060204-MM4-WMP20S-WALTER Designation: CCMT060204-MM4 Grade: WMP20S Series: Tiger·tec Silver Manufacturer: Walter Tools Label: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT060204-MM4 WMP20S Walter Tools Core measurements Nose radius: 0.4 mm Relief angle: 7° Plate form: Rhombus 80° Size designation: 06 Thickness designation: 02 Chipbreaker: MM4 Design and application features Coated carbide grade (Tiger·tec Silver) Execution: T Tolerance class: M Material group suitability: M (stainless steel) Typical use: turning and bore-milling applications in stainless steels FAQ Which materials is this insert intended for? The CCMT060204-MM4 WMP20S is formulated for stainless steel (ISO group M); the Tiger·tec Silver coating and WMP20S grade support secure chip formation and reduced adhesive wear when machining such alloys. What advantages does the MM4 chipbreaker provide? The MM4 chipbreaker on this insert promotes controlled chip breaking and evacuation during turning, which improves process stability and reduces the risk of chip-related surface defects when using the CCMT060204-MM4 WMP20S insert. How does the rhombic 80° form affect cutting performance? The rhombic 80° geometry offers a robust cutting edge suitable for a range of turning operations; combined with a 0.4 mm nose radius it balances strength and surface finish, aiding dimensional consistency across production runs. Is the grade suitable for medium to heavy-duty operations? Yes. The WMP20S grade is intended for medium to robust cutting conditions in stainless steels, delivering good edge life and process reliability under demanding workloads. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060204-MM4 WMP30G MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WMP30G grade, and robust geometry for dependable machining of rostfreier Stahl; the insert offers stable chip formation and long edge life, helping to keep production running smoothly. Order directly via Metav Werkzeuge or consult our specialists for application advice. CCMT060204-MM4 WMP30G — Indexable turning insert for rostfreier Stahl (Tiger·tec Gold) by Walter Tools The CCMT060204-MM4 WMP30G is a precision indexable turning insert engineered for medium to robust conditions when machining rostfreier Stahl, combining a rhombic 80° form with targeted chip control. Tiger·tec Gold coating for long life Grade WMP30G optimised for rostfreier Stahl Rhombic 80° geometry, 0.4 mm corner radius 7° clearance with MM4 chipbreaker Reliable performance where toughness matters The WMP30G grade, applied within the Tiger·tec Gold technology, is formulated to handle the characteristic toughness and heat sensitivity of rostfreier Stahl. The coating increases thermal resistance and reduces flank wear, which translates into a more consistent tool life and fewer index changes. For turning operations that demand durable cutting edges under intermittent cuts or higher temperatures, this insert's balanced combination of substrate and coating supports reliable material removal and repeatable results. Predictable chip formation and improved surface quality Thanks to the MM4 chipbreaker and the rhombic 80° shape, this insert offers controlled chip separation and reduced tendency for built-up edge on sticky alloys. The modest 0.4 mm corner radius provides a compromise between edge strength and accessible geometry for finishing passes, while the 7° clearance helps to avoid rubbing and heat build-up. As a result, process stability is improved and surface finish requirements can be met more consistently with fewer corrective passes. Efficient integration into production workflows The standard CCMT size and indexable format permit quick re-indexing and tool change, which reduces downtime and supports higher machine utilisation. The insert's design is suitable for turning operations where a balance of edge robustness and finish quality is required, making it a pragmatic choice for batch production or mixed-series machining. In practice, the combination of coated carbide, targeted chip control and a sturdy corner radius helps to lower overall machining costs through longer intervals between insert changes and steadier part quality. For application guidance or stock availability of Walter Tools CCMT060204-MM4 WMP30G inserts, contact Metav Werkzeuge for tailored recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: CCMT060204-MM4-WMP30G-WALTER Designation: CCMT060204-MM4 WMP30G Manufacturer: Walter Tools Product type: Indexable turning insert / cutting insert Facts Relief angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Geometry: Rhombus 80° Chipbreaker: MM4 Series: Tiger·tec Gold Grade: WMP30G Material group: M (rostfreier Stahl) Execution: T Tolerance class: M Special features Coating: coated carbide (Tiger·tec Gold technology) Suitable for: rostfreier Stahl Stable chip formation and edge life Designed for medium to robust cutting conditions FAQ What materials is this insert suited for? The CCMT060204-MM4 WMP30G insert is optimised for rostfreier Stahl and performs reliably under the typical demands of those alloys. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WMP30G grade increases thermal resistance and reduces wear, supporting longer intervals between index changes for the insert. Can this insert be used for finishing and roughing? With a 0.4 mm corner radius and MM4 chipbreaker, the insert is adaptable for both robust turning and operations requiring a good surface finish, depending on cutting parameters. Is the geometry suitable for narrow shoulder or profiling work? The rhombic 80° form provides versatility for a range of turning profiles and is commonly used where approach angles and access are factors. What does the MM4 chipbreaker do in practice? The MM4 chipbreaker promotes controlled chip formation and reduces the risk of built-up edge, helping to maintain surface quality and process stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked brand names and product names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between Metav Werkzeuge and the mentioned brands. The offered item is original, brand-new goods of the manufacturer.
CCMT060204-MM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Silver coating and the WSM10S grade for reliable machining of stainless steel and heat‑resistant alloys; the combination of a stable cutting edge and an MM4 chipbreaker supports consistent chip control and longer productive runs. Order directly via Metav Werkzeuge or consult our technical team for process recommendations. CCMT060204-MM4 WSM10S Rhombus 80° turning insert for stainless and superalloys — Walter Tools The CCMT060204-MM4 WSM10S is a rhombic 80° turning insert engineered for machining stainless steel and heat‑resistant superalloys, offering thermal resistance and stable edge life for demanding turning operations. Tiger·tec Silver coating for thermal resistance WSM10S grade for tough materials Precise Rhombic 80° geometry MM4 chipbreaker for controlled chips 7° relief and 0.4 mm corner radius Consistent performance for demanding materials The combination of Tiger·tec Silver coating with the WSM10S carbide grade provides a high level of thermal stability and wear resistance, which translates into stable cutting edges and fewer unplanned tool changes. Designed specifically for machining stainless steel and heat‑resistant alloys, this insert supports a reliable machining cycle by reducing the risk of built‑up edge and excessive flank wear. The result is more predictable component quality and improved process efficiency on the shop floor. Geometry that improves surface finish and chip control The Rhombic 80° shape with a 7° relief angle and a 0.4 mm corner radius is tuned to balance cutting strength and surface integrity. Paired with the MM4 chipbreaker, the geometry promotes controlled chip formation and evacuation, which lowers the risk of rework and tool interference. For production environments where repeatability matters, the insert geometry reduces vibration sensitivity and helps to maintain consistent part tolerances across batches. Process security and operational economy With tolerance class M and an application focus on materials classified S and M, the insert supports safe, repeatable cutting in high‑temperature conditions. The combination of long edge life and dependable chip behaviour reduces downtime and contributes to a better cost per part over time. Production engineers and workshop managers will appreciate the predictable tool life and the option to standardise on a coated grade that covers a wide range of difficult‑to‑machine alloys. Choose Walter Tools inserts from Metav Werkzeuge for enhanced process stability; contact Metav Werkzeuge for application advice or to discuss tool selection and stocking. Technical data Article number: CCMT060204-MM4-WSM10S-WALTER SKU: CCMT060204-MM4-WSM10S-WALTER Name: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte CCMT060204-MM4 WSM10S Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WSM10S (coated cemented carbide) Chipbreaker: MM4 Plate form: Rhombus 80° Execution: T Material suitability: S / M (heat‑resistant superalloys/titanium and stainless steel) Application focus: machining of stainless and high‑temperature alloys FAQ What materials is this insert intended for? The CCMT060204-MM4 WSM10S insert from Walter Tools is intended primarily for stainless steel (M) and heat‑resistant superalloys/titanium (S), offering thermal resistance and edge stability for these demanding materials. How does the MM4 chipbreaker benefit production? The MM4 chipbreaker promotes controlled chip formation and evacuation; in practical terms this reduces chip interference and improves surface finish during turning with the CCMT060204-MM4 WSM10S. What advantages does the Tiger·tec Silver technology provide? Tiger·tec Silver provides enhanced thermal stability and wear resistance, which helps to maintain a stable cutting edge and extend tool life on the CCMT060204-MM4 WSM10S when machining tough alloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original factory‑new goods of the manufacturer.
CCMT060204-MM4 WSM20S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WSM20S grade for secure cutting of stainless steels and heat-resistant alloys; the MM4 chipbreaker and 0.4 mm corner radius support reliable chip control and improved surface finish. Order the inserts directly via Metav Werkzeuge or contact the consultants for application advice. CCMT060204-MM4 WSM20S turning indexable insert — Tiger·tec Silver, for stainless steels & superalloys | Walter Tools CCMT060204-MM4 WSM20S is an indexable turning insert designed for demanding machining of rostfreie Stähle and heat‑resistant alloys, suitable for robust production use in industry environments. Tiger·tec Silver coating for thermal stability WSM20S grade for stainless steels and superalloys MM4 chipbreaker for controlled chip formation Rhombus 80° shape with 0.4 mm corner radius Consistent cutting performance in demanding materials The combination of the Tiger·tec Silver coating and the WSM20S grade provides enhanced thermal resistance and edge stability when machining stainless steels and nickel‑base alloys. This coated carbide composition reduces tool wear under elevated cutting temperatures and supports a stable cutting edge, which directly improves process reliability and reduces unscheduled tool changes. For production environments that require predictable outcomes, this geometry and coating combination delivers measurable gains in uptime and throughput. Controlled chips and reliable surface quality The MM4 chipbreaker is engineered to produce compact, manageable chips when machining tough materials, reducing the risk of entanglement and facilitating automated chip evacuation. The Rhombus 80° form combined with a 0.4 mm corner radius balances strength and accessibility to detail, enabling consistent surface finish in semi‑finishing and finishing operations. The insert geometry supports a repeatable cutting pattern, which benefits downstream processes that depend on uniform component quality. Seamless integration and application support Designed for compatibility with standard toolholders, this insert enables straightforward integration into existing turning setups. The coated carbide grade and chip control features make the component suitable for a range of turning strategies on rostfreie Stähle and high‑temperature alloys, offering flexibility across workpiece types. For tailored machining recommendations, technical data or application comparisons, Metav Werkzeuge provides consultative support to ensure optimal selection and process parameters, helping to align insert choice with production goals and machine capability. Walter Tools backing underlines the engineering focus on consistent tool life and process security. Contact Metav Werkzeuge today for application-specific advice on Walter Tools CCMT060204-MM4 WSM20S inserts and to confirm stock and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: CCMT060204-MM4-WSM20S-WALTER Designation: CCMT060204-MM4 WSM20S Manufacturer: Walter Tools Product type: Turning indexable insert Series: Tiger·tec Silver Numbers / Core data Relief angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness: 02 Shape: Rhombus 80° Tolerance class: M Materials / Special features Coating: Tiger·tec Silver Grade: WSM20S Chipbreaker: MM4 Suitable for: stainless steels (M), superalloys and titanium (S) Material composition: coated carbide FAQ What materials is this insert designed to machine? The CCMT060204-MM4 WSM20S insert from Walter Tools is specified for rostfreie Stähle (stainless steels) and for heat‑resistant superalloys and titanium alloys, matching ISO group M and S applications. How does the MM4 chipbreaker affect machining? The MM4 chipbreaker on this Walter Tools insert promotes compact chip formation and improved evacuation, which helps maintain consistent surface finish and reduces the risk of chip interference during automated or manual turning. What are the key geometry details to consider? The insert features a Rhombus 80° form with a 7° relief angle and a 0.4 mm corner radius; size designation 06 and thickness 02 determine compatibility with corresponding toolholders and cutting parameters. Is the coating suitable for high‑temperature cutting? Yes, the Tiger·tec Silver coating and the WSM20S grade are engineered to support thermal stability and edge strength during elevated temperature machining encountered with rostfreie Stähle and superalloys. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
CCMT060204-MM4 WSM30S MM4 Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a stable MM4 chipformer and a 7° clearance geometry for consistent machining of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or request expert advice from the consultancy team. CCMT060204-MM4 WSM30S — Turning insert CCMT060204-MM4 WSM30S by Walter Tools, Tiger·tec Silver for stainless steels and superalloys CCMT060204-MM4 WSM30S is a rhombic 80° indexable turning insert designed for demanding applications on stainless steels and heat‑resistant superalloys Tiger·tec Silver coated carbide grade WSM30S Optimised chipformer MM4 for reliable chip control 7° clearance angle for secure cutting geometry 0.4 mm corner radius on Rhombus 80° insert Greater process reliability on difficult materials The combination of Tiger·tec Silver coating and the WSM30S grade provides increased thermal resilience and wear resistance when machining stainless steels and superalloys. The coating reduces adhesion and supports a predictable flank wear progression, which translates into less frequent tool changes and fewer unplanned interruptions. As a result, cycle times become more stable and machining schedules are easier to plan. Geometry that improves surface finish and repeatability The Rhombus 80° form with a 0.4 mm corner radius and a 7° clearance angle ensures a defined cutting edge engagement and consistent chip formation. The integrated MM4 chipbreaker promotes controlled chip segmentation and helps prevent built‑up edge on tough alloys. Tolerance class M guarantees reproducible insert seating and repeatable component quality, supporting tighter process control and a reliable surface finish. Economical operation through prolonged tool life Optimised edge preparation and coating technology minimise chipping and premature flank wear, delivering improved tool life and process security in serial production. Stable cutting behaviour reduces scrap rates and the need for rework, which supports predictable manufacturing costs. Metav Werkzeuge can provide recommendations for grade selection and batch sizing to align tooling strategy with production demands. Request batch recommendations or technical guidance for Walter Tools Tiger·tec Silver inserts from Metav Werkzeuge — fast supply and specialist advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CCMT060204-MM4-WSM30S-WALTER Designation: CCMT060204‑MM4 WSM30S Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Brand: Walter Tools Series: Tiger‑tec Silver Core specifications Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Thickness code: 02 Insert form: Rhombus 80° Tolerance class: M Special features Coating: Tiger·tec Silver Carbide grade: WSM30S Chipbreaker: MM4 Suitable for: stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S) Execution: T FAQ What materials is this insert suited for? The CCMT060204‑MM4 WSM30S insert is specified for stainless steels (ISO M) and heat‑resistant superalloys/titanium (ISO S); the Tiger·tec Silver coating and WSM30S grade are optimised for these groups. How does the MM4 chipformer affect machining? The MM4 chipformer on this insert improves chip control and reduces the risk of built‑up edge, which supports a consistent surface finish and reduces secondary operations when using the CCMT060204‑MM4 WSM30S insert. Is the geometry suitable for finishing operations? The Rhombus 80° form with a 0.4 mm corner radius and 7° clearance provides a defined cutting engagement that supports reproducible surface quality, making the insert appropriate for many semi‑finishing and finishing tasks on difficult‑to‑cut alloys. What does tolerance class M mean for setup accuracy? Tolerance class M indicates tighter dimensional control for the insert, which improves repeatability at tool changes and supports consistent component quality when using the Walter Tools insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand‑new manufacturer goods.
CCMT060204-MP4 WPP10G WPP10G Wendeplatten - Walter Tools
The combination of a wear-resistant Tiger‑tec Gold coating, an optimised MP4 chipbreaker and a precise 0.4 mm corner radius delivers reliable, repeatable turning performance for steel applications; order the insert directly via Metav Werkzeuge or consult the technical team for machining recommendations. CCMT060204-MP4 WPP10G turning insert — Tiger‑tec Gold coated insert for steel machining (Walter Tools) The CCMT060204-MP4 WPP10G is a rhombic 80° indexable turning insert engineered for efficient steel turning, offering consistent surface finish and extended tool life in medium to finishing operations. Tiger‑tec Gold coating for extended wear life Optimised MP4 chipbreaker for controlled chips Rhombic 80° shape with 0.4 mm corner radius Specifically designed for steel machining (ISO P) Consistent surface quality and predictable tool life The coated carbide grade WPP10G is developed within the Tiger‑tec Gold family to provide a balance of wear resistance and toughness. This combination reduces flank and crater wear under the typical thermal conditions of steel turning, which results in a more consistent surface finish and longer intervals between insert changes. The rhombic 80° geometry and 7° relief ensure stable cutting engagement, helping to maintain dimensional accuracy and reduce the need for frequent rework. Reliable chip control to keep production flowing Equipped with the MP4 chipbreaker, the insert produces short, manageable chips in a wide range of steel grades, lowering the risk of chip entanglement and improving process safety. Stable chip formation not only reduces downtime associated with manual chip clearing but also enables higher effective cutting parameters, which can increase throughput. The insert’s geometry supports steady cutting forces, contributing to less vibration and a calmer machining environment. Versatile grade tuned for steel (ISO P) applications The carbides’ substrate and coating system have been optimised for the heat and chip behaviour typical of steel machining. Classified for ISO P materials, this grade performs well across unalloyed and alloyed steels, providing a dependable choice for job shops and production lines requiring a universal turning solution. The result is reduced tool inventory complexity and predictable performance across a variety of components. Precision geometry for repeatable part quality With a nominal corner radius of 0.4 mm and a plate thickness of 02, the insert is sized for fine turning and finishing passes where surface integrity matters. The rhombic 80° form allows flexible approach angles and easy toolholder adaptations, supporting repeatable set-ups and simplified insert indexing. This precision geometry supports quality assurance processes by reducing variability between successive parts. Contact Metav Werkzeuge for tailored cutting data, application advice or to procure the Walter Tools CCMT060204-MP4 WPP10G with Tiger‑tec Gold coating through direct supply channels Technical data SKU: CCMT060204-MP4-WPP10G-WALTER Article designation: CCMT060204-MP4 WPP10G Series: Tiger‑tec Gold Grade: WPP10G Core technical figures Insert shape: Rhombic 80° Size designation: 06 Thickness: 02 Corner radius: 0.4 mm Relief (free) angle: 7° Designs and special features Coating: Tiger‑tec Gold Chipbreaker: MP4 Substrate class: Coated carbide Application group: Steel (ISO P) Tolerance class: M Execution: T FAQ What materials is this insert designed for? The CCMT060204-MP4 WPP10G is formulated for steel machining and classified for ISO P applications, making it suitable for unalloyed and alloyed steels. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP10G grade increases wear resistance and stabilises tool life, which helps to extend service intervals and maintain surface quality in continuous turning operations. Which chipformer is used and what advantage does it bring? The insert features the MP4 chipbreaker, which is optimised for controlled chip formation in steel, reducing chip-related interruptions and improving process reliability. Can this insert be used for finishing and medium turning? Yes; the combination of a 0.4 mm corner radius, 7° relief and rhombic 80° geometry makes the insert well suited to finishing and medium turning tasks where dimensional accuracy and surface finish are prioritised. Is this an original Walter Tools product? This is an original Walter Tools insert and is supplied as factory-new, genuine tooling from the manufacturer, ensuring consistent specification and performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer Walter Tools.
CCMT060204-MP4 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP20G grade combined with an MP4 chipbreaker for secure, productive turning of steel; order directly via Metav Werkzeuge or contact the consultants for application advice and cutting-data support. CCMT060204-MP4 WPP20G – turning insert (Rhombic 80°, 0.4 mm) by Walter Tools CCMT060204-MP4 WPP20G is a rhombic 80° indexable turning insert for reliable steel machining, optimised for general finishing and medium-duty turning operations Tiger·tec Gold coated carbide grade WPP20G MP4 chipbreaker for controlled chip formation Rhombic 80° geometry for versatile turning 7° relief angle and 0.4 mm corner radius High metal removal with consistent results The Tiger·tec Gold technology in this insert provides a balanced combination of wear resistance and thermal stability, delivering consistent performance when machining steel (ISO group P). Thanks to the WPP20G grade and the MP4 chipbreaker, the insert controls chip shape and evacuation, which reduces rework and improves process stability. The rhombic 80° geometry allows for a wide range of turning positions, while the 7° relief reduces friction at the cutting edge. These attributes together support higher material removal rates without compromising surface finish. Longer edge life and predictable performance A coated carbide substrate, described here as a coated carbide grade, protects the cutting edge from abrasive wear and heat-related damage. The combination of a robust coating and the engineered chipbreaker leads to improved tool life and repeatable tool changes, which simplifies production planning. The moderate corner radius of 0.4 mm offers a compromise between strength and edge sharpness: it supports improved edge stability in intermittent cuts while still allowing fine finishing passes. This results in fewer tool interventions and more consistent part quality across batches. Practical selection and straightforward handling Selection is simplified by the clear designation CCMT060204-MP4 and the WPP20G grade: the insert is intended for general-purpose turning of steel and fits standard toolholders that accept CCMT-format inserts. The MP4 chipbreaker is designed for predictable chips in typical turning cuts, helping to avoid chip-related downtime. Tolerance class M and the standard size codes make inventory and replacement straightforward. For workshops seeking a balance of economy and process reliability, this insert offers a practical solution that integrates into existing turning operations with minimal adaptation. For reliable steel turning with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge to request cutting-data recommendations or to discuss suitable delivery options at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: CCMT060204-MP4-WPP20G-WALTER SKU: CCMT060204-MP4-WPP20G-WALTER Designation: CCMT060204-MP4 WPP20G Core data Relief angle: 7° Corner radius: 0.4 mm Plate geometry: Rhombus 80° Size code: 06 Thickness code: 02 Tolerance class: M Materials & features Grade: WPP20G (Tiger·tec Gold series) Chipbreaker: MP4 Coating/class: coated carbide Suitable for: Steel (ISO group P) Execution: T Plate form: Rhombus 80° FAQ What materials is this insert suited for? The CCMT060204-MP4 WPP20G insert is specified for machining steel (ISO group P); the WPP20G grade and Tiger·tec Gold coating are optimised for the heat and chip behaviour typical of steel turning. How does the MP4 chipbreaker benefit production? The MP4 chipbreaker on the CCMT060204-MP4 WPP20G creates controlled chip forms, improving chip evacuation and reducing the risk of tangling or workpiece damage during continuous turning operations. What does the CCMT designation indicate? CCMT identifies a rhombic 80° indexable insert shape with a specific size and tolerance; the CCMT060204-MP4 WPP20G therefore fits standard CCMT toolholders and offers the 0.4 mm corner radius and MP4 chip control. Is the Tiger·tec Gold series suitable for heavy interrupted cuts? Tiger·tec Gold offers improved wear resistance and thermal stability; while the CCMT060204-MP4 WPP20G is aimed at general turning, its coating and grade provide enhanced robustness that helps in demanding applications—selection should match specific cutting conditions. What edge life improvements can be expected with WPP20G? WPP20G combines coating technology with a carbide substrate to increase wear tolerance and edge strength, yielding more predictable and extended tool life compared with uncoated grades under comparable conditions. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are used solely for explanation and do not imply any connection between Metav Werkzeuge and the mentioned manufacturers. The offered article is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
CCMT060204-MP6 WPP10G WPP10G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, precise geometry and reliable chip control for consistent turning performance; order the CCMT060204-MP6 WPP10G insert directly via Metav Werkzeuge or ask the consultants for application support. CCMT060204-MP6 WPP10G turning insert — Tiger‑tec Gold, MP6 chipbreaker, for steel — Walter Tools The CCMT060204-MP6 WPP10G is a rhombic 80° indexable turning insert designed for steel machining, offering a balance of wear resistance and stable chip control for productive turning operations. Tiger‑tec Gold coating for enhanced wear resistance Optimised MP6 chipbreaker for steel machining Rhombic 80° form for versatile turning applications 7° clearance and 0.4 mm corner radius for precision Longer tool life through advanced coating technology The insert uses the Tiger‑tec Gold series and the WPP10G grade, a coated carbide solution engineered to slow flank wear and extend tool life in demanding steel turning tasks. The coating architecture combines wear-resistant layers with a tough substrate to manage the temperature and stresses encountered in continuous turning. This results in a measurable reduction in tool changes and unplanned downtime, so production stays steady and replacement costs are reduced. The combination of coating and grade aims to provide predictable performance across a range of common steel grades. Predictable chip formation and process security for steels Equipped with the MP6 chipbreaker, the insert delivers stable chip control when machining materials classified under ISO P (steel). The breaker geometry shapes chips to break reliably under typical cutting conditions, lowering the risk of entanglement and improving swarf evacuation. Improved chip control enhances surface finish consistency and reduces secondary operations. For workshops that prioritise process reliability, the engineered chip formation reduces interruptions and supports higher feed rates without compromising part quality. Geometry optimised for accurate turning and tool stability The CCMT060204-MP6 WPP10G geometry — rhombic 80° form with 7° clearance and a 0.4 mm corner radius — combines accessibility to shoulder and profile contours with a robust cutting edge. The insert size designation 06 and the plate thickness code 02 offer a compact yet rigid solution for general turning and light turning tasks. The 80° approach enables effective use on lathe toolholders while the modest corner radius helps achieve good surface quality while still providing edge support to resist chipping. This mix of form and dimensions supports both finishing passes and medium-duty cuts under stable conditions. Application guidance and selection notes for production use Tolerance M indicates manufacturing accuracy suitable for consistent seating in standard toolholders. The grade WPP10G is tailored primarily for steel workpieces and performs across a typical range of unalloyed and alloyed steels. For optimised results, pair the insert with a toolholder compatible with CCMT geometry and set cutting parameters that reflect material, depth of cut and machine rigidity. For tailored recommendations on feeds, speeds and insert clamping, the sales engineers at Metav Werkzeuge can provide cutting data suited to the specific steel grade and machining task. Contact Metav Werkzeuge for cutting data and to secure genuine Walter Tools Tiger‑tec Gold inserts for reliable steel turning Technical Data SKU: CCMT060204-MP6-WPP10G-WALTER Designation: CCMT060204-MP6 ISO designation: CCMT060204-MP6 WPP10G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Clearance angle: 7° Corner radius: 0.4 mm Insert form: Rhombic 80° Insert size: 06 Thickness code: 02 Tolerance class: M Special features Coating/series: Tiger‑tec Gold Grade: WPP10G Chipbreaker: MP6 Application group: Steel (ISO P) Material type code: P FAQ What materials is this insert designed for? The CCMT060204-MP6 WPP10G insert is designed primarily for machining steel (ISO P); the WPP10G grade is optimised for the heat and chip characteristics of steel. How does the MP6 chipbreaker affect machining performance? The MP6 chipbreaker promotes controlled chip formation and reliable breakage when turning steel, which improves swarf evacuation and contributes to a consistent surface finish with fewer interruptions. What does the Tiger‑tec Gold series deliver compared with uncoated grades? The Tiger‑tec Gold technology provides enhanced wear resistance and thermal stability compared with uncoated grades, helping to extend tool life and maintain cutting-edge integrity under continuous cutting loads. Which geometry features ensure cutting stability? The rhombic 80° insert form, 7° clearance and 0.4 mm corner radius together balance accessibility and edge support, offering stability for a wide variety of turning tasks while helping to achieve good surface quality. Is the insert suitable for finishing operations? Yes; with an appropriate feed and depth of cut, the insert’s corner radius and geometry support finishing passes, while the grade and coating help maintain a consistent cutting edge for repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation. There is no connection between our company and the named brands. The offered article is original, brand-new goods from the manufacturer Walter Tools.
CCMT060204-MP6 WPP20G MP6 Wendeplatten - Walter Tools
Benefit from Walter Tools' Tiger‑tec Gold technology combined with the WPP20G grade and the MP6 chipbreaker for consistent, economical steel turning; the insert’s 0.4 mm nose radius and 7° relief angle deliver controlled cutting and fine surface finish. Order the CCMT060204-MP6 WPP20G directly via Metav Werkzeuge or contact our consultants for tailored cutting data. CCMT060204-MP6 WPP20G — Indexable turning insert, Tiger‑tec Gold, for steel (Walter Tools) The CCMT060204-MP6 WPP20G is an indexable turning insert engineered for reliable steel machining, combining a Tiger‑tec Gold coated grade with an MP6 chipbreaker for controlled chip formation and consistent surface quality. Tiger‑tec Gold coated grade WPP20G MP6 chipbreaker for stable chip control 0.4 mm nose radius for fine finishes Rhombic 80° insert with 7° relief angle High-performance coating and carbide grade for process security The combination of the Tiger‑tec Gold coating and the WPP20G grade produces a coated carbide geometry tuned for the thermal and mechanical demands of steel machining. This specification reduces flank wear and preserves edge stability under fluctuating cutting conditions, which directly improves process reliability and reduces unplanned tool changes. The engineering focus is on repeatable results in series production, ensuring that groove and finishing operations run with constant tolerances and minimal scrap rates. Geometry engineered for controlled chips and superior surface finish The insert’s MP6 chipbreaker and Rhombic 80° shape deliver controlled chip formation and evacuation during turning operations in steel. The small 0.4 mm nose radius supports fine surface finishes and precise dimensional control on shoulder and profiling cuts, while the 7° relief angle helps to lower cutting forces and reduce rubbing at the flank. These geometric choices lead to lower tool-induced vibration and improved surface integrity, especially in medium- to high-feed finishing passes. Longer tool life for efficient production and lower cost-per-part A wear-resistant grade combined with an optimised chipbreaker yields predictable tool life and fewer indexings, which in turn increases machine uptime. For production environments that prioritise throughput, the result is a measurable improvement in productivity: fewer interruptions for tool replacement and less variability in part quality. The insert’s characteristics favour cost-efficient machining cycles on unalloyed and alloyed steel, helping to achieve a faster return on tooling investment through reduced downtime and consistent performance. Straightforward selection and compatibility with standard tooling systems Designated as CCMT size 06 with thickness code 02 and the ISO label CCMT060204-MP6 WPP20G, this insert fits established toolholder systems for rhombic 80° inserts and is suited to common turning applications in component and jobbing shops. Selection is simplified by the clear material group indication (ISO group P for steel) and the widely used MP6 chipbreaker family. If clarification on grade selection or cutting data is required, technical guidance is available to align tool choice with machining strategy and material specifics. Choose Walter Tools' Tiger‑tec Gold grade WPP20G for consistent steel turning performance — contact Metav Werkzeuge for cutting data, availability and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: CCMT060204-MP6-WPP20G-WALTER Product: Indexable turning insert Designation: CCMT060204-MP6 Full designation: CCMT060204-MP6 WPP20G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Relief angle: 7° Nose radius: 0.4 mm Insert size: 06 Insert thickness: 02 Tolerance class: M Special features Grade: WPP20G (coated carbide) Chipbreaker: MP6 Insert shape: Rhombic 80° Material application: steel (ISO group P) FAQ What materials is this insert suitable for? The CCMT060204-MP6 WPP20G is specified for machining steel (ISO group P) and is optimised for the thermal and chip-formation behaviour typical of unalloyed and alloyed steels. How does the MP6 chipbreaker affect machining? The MP6 chipbreaker promotes short, controllable chips and consistent evacuation, which reduces tool wear and supports steady cutting conditions when using the WPP20G grade on steel. What does the WPP20G grade offer compared with other grades? WPP20G, part of the Tiger‑tec Gold family, is a coated carbide grade designed for stable edge life and broad applicability in steel turning, offering a balance between wear resistance and toughness. Is the CCMT060204-MP6 compatible with standard holders? Yes, the CCMT060204-MP6 designation corresponds to a common rhombic 80° insert format and is compatible with standard toolholders designed for CCMT inserts. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes and do not imply any affiliation between Metav Werkzeuge and the named brands. The offered item is an original, brand-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
CCMT060204-MP6 WPP30G WPP30G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, the MP6 chipbreaker for stable chip formation and precise 80° rhombic geometry to maintain consistent productivity in steel turning; order the CCMT060204-MP6 WPP30G indexable insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. CCMT060204-MP6 WPP30G indexable turning insert — Tiger‑tec Gold coating, MP6 chipbreaker (Walter Tools) The CCMT060204-MP6 WPP30G is an indexable turning insert engineered for general steel turning, combining a coated carbide grade and a dedicated chipbreaker to support reliable production in conventional and automated turning operations. Tiger‑tec Gold coating for enhanced wear resistance MP6 chipbreaker for stable chip formation Rhombic 80° geometry with 0.4 mm nose radius Designed for steel turning, tolerance class M Longer tool life through advanced coating technology The coated carbide grade WPP30G, developed within the Tiger‑tec Gold series, is optimised for the thermal and mechanical conditions typical when machining steel. The multilayer coating improves wear resistance and protects the cutting edge under elevated temperatures, which reliably extends tool life and reduces the frequency of index changes. For production environments focused on uptime and predictable replacement intervals, this results in lower process interruptions and more consistent component tolerances. Stable chips and improved surface quality from targeted geometry The combination of the MP6 chipbreaker and the 80° rhombic form delivers controlled chip formation and secure evacuation, reducing the risk of built-up edge and improving surface finish. The 0.4 mm corner radius balances strength and profile accuracy, enabling modest finishing cuts without premature edge failure. The insert’s relief geometry and tolerance class M support repeatable seating in toolholders, which shortens setup time and improves batch-to-batch consistency. Practical productivity and process security in steel turning Designed for unalloyed and alloyed steels, this insert’s composition and chip control enable higher sustained cutting data compared with uncoated grades, making it suitable for both stable and slightly variable cutting conditions. The compact geometry (size 06, thickness 02) allows flexible use in standard turning toolholders, while the coated substrate minimises edge wear and supports predictable tool life. For operations aiming to raise throughput without compromising dimensional accuracy, the combination of coating and chipbreaker contributes to measurable process improvements. For tailored recommendations on integrating Walter Tools Tiger‑tec Gold inserts into existing turning processes, contact Metav Werkzeuge for application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: CCMT060204-MP6-WPP30G-WALTER Article designation: CCMT060204-MP6 WPP30G Product type: Indexable turning insert Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert shape: Rhombic 80° Insert size: 06 Thickness: 02 Tolerance class: M Special features Coating/series: Tiger‑tec Gold Grade: WPP30G (coated carbide) Chipbreaker: MP6 Execution: T Material application: Steel (P, ISO 513) Designation without grade: CCMT060204-MP6 SKU/identifier: CCMT060204-MP6-WPP30G-WALTER FAQ Is this insert suitable for general steel turning? Yes. The CCMT060204-MP6 WPP30G is formulated for machining steel (ISO group P), offering a balance between wear resistance and toughness for unalloyed and alloyed steels. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating increases thermal and abrasive resistance, which extends edge life and supports higher cutting parameters when turning steel with the Walter Tools insert. How does the MP6 chipbreaker affect machining? The MP6 chipbreaker promotes stable chip formation and evacuation, improving surface finish and reducing the likelihood of built‑up edge during continuous turning. Can this insert be used for finishing and roughing operations? With a 0.4 mm nose radius and robust coating, the insert is suitable for light finishing and medium turning. For heavy roughing, selection of a larger radius or different geometry may be advisable. What are the key dimensions to check for toolholder compatibility? Check the insert designation CCMT060204-MP6 (shape, size 06, thickness 02, rhombic 80°) and tolerance class M to ensure correct seating and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original factory‑new product of the manufacturer.
CCMT060204-RK4 WKK10S WKK10S Wendeplatten - Walter Tools
Benefit from high wear resistance and reliable chip control for efficient cast iron turning; the combination of the Tiger‑tec Silver coating and the WKK10S grade ensures productive machining with stable edge life. Order the insert directly via Metav Werkzeuge or contact the consultants for application advice. CCMT060204-RK4 WKK10S indexable turning insert with Tiger‑tec Silver, for cast iron — Walter Tools The CCMT060204-RK4 WKK10S is a rhombic 80° indexable insert designed for productive turning of cast iron, combining a coated carbide grade with a dedicated chipbreaker for controlled, repeatable machining. Tiger‑tec Silver coating for high wear resistance Optimised for cast iron (ISO K) Rhombic 80° geometry for versatile cutting angles 0.4 mm corner radius, 7° clearance for stable cuts Increased productivity through optimised coating and grade The combination of the Tiger‑tec Silver coating with the WKK10S grade is engineered for abrasive cast iron applications. The coated carbide provides improved wear resistance and extended tool life, which directly reduces tool change frequency and downtime. The insert’s chipbreaker RK4 is tailored to the typically short, brittle chips of cast iron, promoting consistent chip segmentation and safe evacuation. This results in a measurable increase in machining efficiency and predictable cycle times. For production environments, the technical choice of a coating‑grade pair tuned to the workpiece material translates into lower running costs and higher throughput. Precision and process reliability from geometry and tolerance A rhombic 80° insert form offers a robust seating and versatile cutting edge orientation for a variety of turning operations. The 0.4 mm corner radius and 7° clearance deliver a balance between edge strength and surface finish: the radius supports a stable cutting edge under intermittent loads, while the clearance minimises rubbing. The insert is supplied in tolerance class M, ensuring repeatable location and consistent cutting behaviour across indexed positions. Those aspects reduce set‑up variability and support reliable surface quality in series production, making the component well suited for demanding cast iron turning tasks where consistency matters. Practical advantages and support for shopfloor decisions Choosing this insert provides a clear operational benefit: controlled chip formation, improved tool life and straightforward indexability. The insert form and chip control reduce the risk of chip jamming and protect downstream equipment. For users less familiar with tooling specifics, the terminology means the following in practice: a coated carbide insert (Tiger‑tec Silver) resists abrasive wear common with cast iron; RK4 denotes the chipbreaker style tuned to produce short, manageable chips; the rhombic 80° shape allows flexible toolholder set‑up. If additional machining data or optimisation tips are required, Metav Werkzeuge’s technical advisers are available to assist with feed and speed recommendations tailored to specific cast iron grades. Contact Metav Werkzeuge for application advice on the Walter Tools CCMT060204‑RK4 WKK10S insert and to discuss suitable toolholders and cutting parameters Technical data SKU: CCMT060204-RK4-WKK10S-WALTER Designation: CCMT060204-RK4 WKK10S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKK10S Type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Facts Clearance angle: 7° Corner radius: 0.4 mm Insert size: 06 Plate thickness: 02 Tolerance class: M Special features Coating: Tiger‑tec Silver Chipbreaker: RK4 Shape: Rhombic 80° Execution: T Suitable for cast iron (ISO K) FAQ What materials is this insert intended for? The CCMT060204‑RK4 WKK10S insert is optimised for machining cast iron (ISO K), with the Tiger‑tec Silver coating and the WKK10S grade designed for abrasive wear and brittle chip formation. How does the RK4 chipbreaker affect machining? The RK4 chipbreaker promotes short, controlled chips suited to cast iron, improving chip evacuation and reducing the risk of entanglement during turning operations. Can the insert be rotated or indexed for multiple uses? Yes, the rhombic 80° geometry and tolerance class M enable reliable indexing of cutting edges, providing repeatable seating and multiple effective edges per insert. What cutting results can be expected regarding surface finish? With the 0.4 mm corner radius and correct cutting parameters, the insert delivers a stable cutting action that supports consistent surface quality on cast iron components. Who to contact for application data and cutting parameters? For specific feed, speed and toolholder recommendations for this Walter Tools insert, contact Metav Werkzeuge’s technical advisors who can provide tailored machining data. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen. The Walter AG (brand: Walter Tools) is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Trademark and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original factory‑new goods of the manufacturer.
CCMT060204-RK4 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of high wear resistance, precise chip control and a robust geometry to maintain productivity in cast iron turning; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. CCMT060204-RK4 WKK20S – Turning and boring indexable insert, Tiger‑tec Silver, for cast iron (Walter Tools) The CCMT060204-RK4 WKK20S is an indexable turning and drilling insert designed for productive cast iron machining, offering a rhombic 80° form for versatile tool engagement. Tiger‑tec Silver coating for high wear resistance Optimised for cast iron (ISO group K) RK4 chipbreaker for controlled chip formation 0.4 mm corner radius, 7° clearance angle High productivity and consistent tool life for cast iron components The combination of the WKK20S grade and the Tiger‑tec Silver coating targets the abrasive wear typical of cast iron, delivering a predictable edge life that supports stable cycle times. As a coated carbide cutting grade optimised for ISO group K (cast iron), the insert provides reliable performance in interrupted cuts and in processes that produce short, brittle chips. The result is reduced tool-change frequency and more consistent part tolerances, which improves overall process economy without compromising surface quality. Geometry and chip control explained for dependable cutting The rhombic 80° shape paired with a 0.4 mm corner radius and a 7° clearance angle gives a balance between strength and precision: the larger corner radius increases edge robustness for roughing while still enabling acceptable finishes for finishing passes. The RK4 chipbreaker is engineered to break and evacuate chips efficiently in cast iron turning, reducing the risk of built-up edge and machine downtime. Clearances and radii are fine-tuned to allow stable cutting forces and repeatable contact conditions in indexable-tool systems. Coating technology and application scope for process assurance The insert is supplied in the Walter Tools Tiger‑tec Silver series and is a coated carbide type, specifically formulated for abrasive cast iron work. The coating enhances thermal and chemical resistance at the cutting edge, supporting higher cutting parameters and thus better productivity. Tolerance class M and the standard designation ensure interchangeability with common toolholders that accept CCMT plates. For application support or parameter recommendations when machining grey or nodular cast iron, Metav Werkzeuge’s technical team can advise on optimal feeds, speeds and coolant strategies to match production goals. Contact Metav Werkzeuge for tailored cutting data, grade comparisons or batch supply options for Walter Tools Tiger‑tec Silver inserts and receive expert recommendations from our application consultants. Technical Data Article number: CCMT060204-RK4-WKK20S-WALTER Designation: CCMT060204-RK4 WKK20S Manufacturer: Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte / Drehwendeschneidplatte Grade: WKK20S Series: Tiger‑tec Silver Core data Corner radius: 0.4 mm Clearance angle: 7° Plate form: Rhombus 80° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Coating: Tiger‑tec Silver Material: coated carbide (cutting grade) Chipbreaker: RK4 Application: Cast iron (ISO group K) FAQ What materials is this insert suitable for? The CCMT060204-RK4 WKK20S is specified for machining cast iron (ISO group K) and its WKK20S grade and Tiger‑tec Silver coating are tuned to abrasive conditions typical of those materials. How does the RK4 chipbreaker benefit production? The RK4 chipbreaker provides reliable chip shaping and evacuation in cast iron turning, which reduces interruptions and contributes to consistent cycle times with the CCMT060204-RK4 insert. What does the 0.4 mm corner radius mean for surface finish? A 0.4 mm corner radius increases edge strength for robust cutting while allowing acceptable surface finishes; it is a compromise between durability and achievable finish quality. Is this insert compatible with common CCMT toolholders? The insert follows the CCMT designation and tolerance class M, making it compatible with standard toolholders designed for CCMT indexable plates. Can Metav Werkzeuge advise on cutting data for this grade? Yes, Metav Werkzeuge provides application support and can recommend feeds, speeds and coolant strategies for the WKK20S grade in cast iron operations. Walter Tools — Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves exclusively for explanation and product identification; there is no affiliation between Metav Werkzeuge and the trademark holders. The offered article is an original, brand‑new product of the manufacturer.
CCMT060204-RM4 WMP20G RM4 Wendeplatten - Walter Tools
Benefit from stable chip formation and consistent surface quality thanks to the Tiger·tec Gold WMP20G grade and the RM4 chipbreaker; the rhombic 80° geometry with a 0.4 mm corner radius and 7° clearance angle delivers reliable turning of stainless steel with predictable tool life. Order the CCMT060204-RM4 WMP20G directly via Metav Werkzeuge or consult their technical advisers for application-specific recommendations. CCMT060204-RM4 WMP20G – Indexable turning insert (Rhombic 80°, for stainless steel) by Walter Tools CCMT060204-RM4 WMP20G is a rhombic 80° indexable insert designed for turning and boring operations on stainless steel, combining the Tiger·tec Gold grade with an RM4 chipbreaker for secure chip control and extended edge stability Tiger·tec Gold grade for extended life RM4 chipbreaker optimised for stainless steel Rhombic 80° geometry for versatile cutting 0.4 mm corner radius for precise surface finish Consistent machining performance for stainless steel components The combination of the WMP20G cutting grade and the RM4 chipbreaker targets the typical challenges of machining stainless steel: material toughness, built-up edge tendency and heat accumulation. By promoting stable chip formation and reduced friction, this configuration contributes to longer tool life and fewer interruptions in the production cycle. The result is a reliable process with improved repeatability and predictable productivity gains for series turning and finishing operations. Geometry and edge design that improve production quality The rhombic 80° insert geometry provides a good balance between approachability and strength, while the 0.4 mm corner radius supports consistent surface finish without sacrificing edge robustness. A 7° clearance angle reduces rubbing at the flank face and helps to avoid premature wear during interrupted cuts. These geometric choices are intended to enable stable cutting conditions and minimise the need for frequent insert changes, supporting efficient workshop throughput. Coating and grade technology for robust tool life Built on the Tiger·tec Gold coating concept, the cutting material addresses adhesion and thermal loads typical of stainless-steel machining. The coated cemented carbide composition enhances oxidation resistance and wear control under moderate to robust cutting conditions. For operations where reliable edge performance and reduced down-time are priorities, this coated grade offers a measurable improvement in process security compared with uncoated grades. Practical advantages and workplace integration As an indexable insert in the CCMT family, the component fits standard toolholders and allows quick index changes to restore cutting geometry without regrinding. The compact plate designation and standard thickness are suitable for a wide range of turning setups, keeping inventory management straightforward. Combined with the proven chip control of the RM4 geometry, the insert supports stable swarf handling and reduces the risk of workpiece surface defects during medium to heavy turning of stainless alloys. Contact Metav Werkzeuge for a tailored cutting strategy and precise delivery options for Walter Tools inserts: eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tool selection and availability Technical data Article number: CCMT060204-RM4-WMP20G-WALTER SKU: CCMT060204-RM4-WMP20G-WALTER Product designation: CCMT060204-RM4 WMP20G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WMP20G Price net: 8.1 Core specifications Shape: Rhombic 80° Clearance angle: 7° Corner radius: 0.4 mm Size: 06 Thickness: 02 Chipbreaker: RM4 Tolerance class: M Execution: T Special features Coating technology: Tiger·tec Gold Material group suitability: stainless steel (M) Insert type: indexable turning/boring insert Application: medium to robust conditions, secure chip formation FAQ Which materials is this insert intended for? The CCMT060204-RM4 WMP20G is specified for stainless steel machining (ISO group M), using the Tiger·tec Gold grade to manage toughness and heat-sensitive behaviour. What does the RM4 chipbreaker provide? The RM4 chipbreaker on this insert enhances chip control during turning of stainless steel, promoting short stable chips and reducing the risk of built-up edge. How does the 0.4 mm corner radius affect the finish? A 0.4 mm corner radius offers a compromise between edge strength and surface quality, supporting good finishes without unduly weakening the cutting edge. Is this insert compatible with standard CCMT toolholders? The CCMT060204-RM4 designation corresponds to the standard CCMT family; it is compatible with toolholders designed for CCMT-format indexable inserts. What cutting conditions suit this coated grade? The Tiger·tec Gold WMP20G grade is intended for medium to robust cutting conditions on stainless alloys, where stable edge performance and controlled wear are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are used for explanation only and do not indicate any affiliation. The listed article is an original, factory-new product of the manufacturer.
CCMT060204-RM4 WMP20S RM4 Wendeplatten - Walter Tools
Reliable machining of stainless steel thanks to the Tiger·tec Silver coating and the RM4 chipbreaker, delivering stable chip control and extended edge life. The CCMT060204-RM4 WMP20S insert combines a Rhombic 80° geometry with a 0.4 mm corner radius and 7° clearance for versatile drilling, boring and turning. Order directly via Metav Werkzeuge or consult the application specialists for tailored advice. CCMT060204-RM4 WMP20S Drilling/Boring and Turning Indexable Insert — Tiger·tec Silver for stainless steel | Walter Tools The CCMT060204-RM4 WMP20S is an indexable insert designed for precise drilling, boring and turning of stainless steel under medium to robust machining conditions Tiger·tec Silver coated carbide grade WMP20S Optimised RM4 chipbreaker for stainless steel Rhombic 80° shape with 0.4 mm corner radius 7° clearance for secure cutting engagement Consistent performance on stainless steel with advanced coating The combination of Tiger·tec Silver coating and the WMP20S grade delivers higher wear resistance and improved thermal stability when machining stainless steel. This coating technology reduces the tendency for built-up edge and supports a stable cutting edge, which translates into longer tool life and fewer interruptions for index changes. For process-oriented operations where repeatability matters, the improved surface endurance of the coating helps maintain component tolerances and reduces the frequency of regrinds. Geometry and chip control that reduce machine time The Rhombic 80° plate form and RM4 chipbreaker are tuned to provide reliable chip formation and evacuation during combined drilling, boring and turning cycles. The 7° clearance angle minimises rubbing while ensuring positive engagement in intermittent cuts. A 0.4 mm corner radius balances edge strength and surface finish, making the insert suitable for medium to robust feeds without sacrificing dimensional control. The plate size code and thickness code allow secure clamping in standard toolholders, helping to reduce vibration and improve surface quality. Versatile integration for productive workshop workflows As an indexable insert from Walter Tools, the CCMT060204-RM4 WMP20S supports mixed-production environments that demand both flexibility and economy. The coated, solid-carbide-based grade and robust chipforming geometry reduce tool change frequency and scrap rates, contributing to a lower cost per part over production runs. Technical queries regarding adaptation to specific toolholders or process windows can be addressed by the supplier to ensure optimal integration into existing machining cells. For reliable, high-performance machining of stainless steel select the Walter Tools CCMT060204-RM4 WMP20S and contact Metav Werkzeuge for precise application support and availability Technical data Article number: CCMT060204-RM4-WMP20S-WALTER Designation: CCMT060204-RM4 WMP20S Manufacturer: Walter Tools Core specifications Clearance angle: 7° Corner radius: 0.4 mm Plate size code: 06 Thickness code: 02 Design & features Series: Tiger·tec Silver Grade: WMP20S (coated carbide) Chipbreaker: RM4 Plate form: Rhombus 80° Execution: T Application: stainless steel FAQ Is this insert suitable for machining stainless steels? Yes. The CCMT060204-RM4 WMP20S grade is designed specifically for stainless steel and is intended for medium to robust machining conditions with a focus on stable chip formation. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating enhances wear resistance and thermal stability, reducing built-up edge and supporting longer cutting-edge life when machining difficult-to-machine alloys such as stainless steel. Which operations are appropriate for this insert? The insert is intended for drilling, boring and turning applications where an indexable geometry with a Rhombic 80° shape and RM4 chip control improves process reliability. How does the RM4 chipbreaker affect machining? The RM4 chipbreaker is optimised to produce short, controllable chips on stainless steel, helping to prevent entanglement, improve surface finish and reduce the risk of rework. What should be considered when selecting this insert for a toolholder? Consider the plate size code and thickness code to ensure proper clamping and rigidity. The 0.4 mm corner radius offers a compromise between strength and finish; match feed and depth of cut to the insert’s geometry for best results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are used for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered article is original and factory-new.
CCMT060204-RM4 WMP30G RM4 Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the RM4 chipbreaker and reliable performance on stainless steel for consistent, productive turning operations; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. CCMT060204-RM4 WMP30G — CCMT060204-RM4 WMP30G indexable insert for stainless steel by Walter Tools The CCMT060204-RM4 WMP30G is a rhombic 80° indexable insert designed for turning operations in stainless steel under medium to robust cutting conditions. Tiger·tec Gold coated carbide Optimised RM4 chipbreaker for secure chips Rhombic 80° form, 0.4 mm corner radius Designed for stainless steel machining Consistent productivity through tailored coating and grade The combination of the Tiger·tec Gold coating and the WMP30G grade provides improved wear resistance and reliable edge stability when machining stainless steel. Because stainless grades tend to be tough and generate heat, the coating supports secure chip formation and reduces adhesion at the cutting edge. This results in longer tool life and fewer interruptions in the production flow, making the insert a practical choice where reproducible results are required. Predictable chip control and geometry for process security The RM4 chipbreaker has been engineered to shape and evacuate chips efficiently during turning, lowering the risk of built-up edge and secondary machining. The rhombic 80° geometry together with a 0.4 mm corner radius affords a balance between strength and accessibility to the workpiece, enabling steady cutting forces and improved surface finish on stainless components. These characteristics support a stable machining process and fewer part rejects. Practical benefits for workshop workflows With a clearance angle of 7° and a compact plate format, the insert allows for flexible clamping and straightforward indexation when the cutting edge is worn. The coated carbide construction ensures it withstands the thermal and mechanical demands typical for stainless-steel turning. Consequently, the grade delivers economic advantage through reduced insert change frequency and predictable maintenance intervals for production schedules. Application advice and matching strategies For medium to robust turns in stainless grades, select feeds and speeds that balance heat and cutting force; the grade and chipbreaker are intended to secure chip control rather than to push for maximum cutting speed. When in doubt about machining parameters or toolholder compatibility, consult the technical data provided by the manufacturer or reach out to the supplier for tailored recommendations. Supplementary guidance supports process set-up and helps to translate the insert’s technical benefits into measurable shop-floor improvements. Contact Metav Werkzeuge for personalised recommendations on toolholder pairing, availability and application-specific parameter sets and benefit from professional consultation and supply reliability. Technical Data Article number: CCMT060204-RM4-WMP30G-WALTER Designation: CCMT060204-RM4 ISO designation: CCMT060204-RM4 WMP30G Series: Tiger·tec Gold Grade: WMP30G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.4 mm Shape: Rhombic 80° Size: 06 Thickness: 02 Tolerance class: M Special features Coating: Tiger·tec Gold Material: Coated carbide Chipbreaker: RM4 Suitable for: stainless steel (M) Application: medium to robust turning conditions FAQ What materials is this insert intended for? The CCMT060204-RM4 WMP30G insert from Walter Tools is intended primarily for machining stainless steel and is optimised for medium to robust cutting conditions. Can the insert cope with high temperatures during turning? Yes, the Tiger·tec Gold coating on the WMP30G grade enhances thermal resistance and helps maintain edge stability under elevated temperatures typical of stainless-steel turning. How does the RM4 chipbreaker affect surface finish? The RM4 chipbreaker promotes reliable chip formation and evacuation, which contributes to a more consistent surface finish and reduced risk of built-up edge during turning. Is the rhombic 80° form suitable for interrupted cuts? The rhombic 80° geometry with a 0.4 mm corner radius offers a robust cutting edge that performs well in many interrupted-turning scenarios while providing good access to the workpiece. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between Metav Werkzeuge and the named manufacturers. The offered item is an original, brand-new product from Walter Tools.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com