Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
ADCT 1545PD KC410M Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Technical data ADCT 1545PD indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: ADCT1545PDFRLDJ-KC410M-KENNAMETAL Facts & Figures: ISO-Code: ADCT1545PD Clearance Angle: 15° Angle: 85° Special features Material: cemented carbide Grade: KC410M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The mention of protected brand names and trademarks is for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-ADCT-1545PD-KC410M-Kennametal 40END
ADCT 1545PD KC522M Indexable Insert - Kennametal
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts ADCT 1545PD from Kennametal Brand: Kennametal Manufacturer Order Number: ADCT1545PDSRLD-KC522M-KENNAMETAL ISO-Code: ADCT1545PD Grade: KC522M Material: cemented carbide Form: parallelogram Clearance Angle: 15° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Chip Breaker: single-sided Angle: 85° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. Quotations of brand names and registered trademarks are for illustrative purposes only. Mention of the brands does not imply any relationship to our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-ADCT-1545PD-KC522M-Kennametal 40END
ADCT 1545PD KC725M Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Product specifications indexable inserts ADCT 1545PD from Kennametal Brand: Kennametal Manufacturer Order Number: ADCT1545PDSRLD-KC725M-KENNAMETAL ISO-Code: ADCT1545PD Grade: KC725M Material: cemented carbide Form: parallelogram Clearance Angle: 15° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Chip Breaker: single-sided Angle: 85° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the Kennametal brand. 40START indexable-inserts-ADCT-1545PD-KC725M-Kennametal 40END
ADCT 1545PD KC725M Indexable Insert - Kennametal
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing by post. Product details for ADCT 1545PD indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: ADCT1545PDERLD-KC725M-KENNAMETAL Facts / Figures: ISO-Code: ADCT1545PD Clearance Angle: 15° Angle: 85° Features Material: cemented carbide Grade: KC725M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The mention of protected brand names and trademarks is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-ADCT-1545PD-KC725M-Kennametal 40END
ADCT 1545PD KCPK30 Indexable Insert - Kennametal
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications indexable inserts ADCT 1545PD from Kennametal Brand: Kennametal Manufacturer Order Number: ADCT1545PDSRLD-KCPK30-KENNAMETAL Facts for the tool: ISO-Code: ADCT1545PD Clearance Angle: 15° Angle: 85° Features Material: cemented carbide Grade: KCPK30 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com The rights to brand names and registered trademarks are held by their rightful owners. The mention of brands and registered trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-ADCT-1545PD-KCPK30-Kennametal 40END
ADCT 1545PD KCPK30 Indexable Insert - Kennametal
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for ADCT 1545PD inserts from Kennametal Brand: Kennametal Manufacturer Order Number: ADCT1545PDERLD-KCPK30-KENNAMETAL Facts for the tool: ISO-Code: ADCT1545PD Clearance Angle: 15° Angle: 85° Special features Material: cemented carbide Grade: KCPK30 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. The brands mentioned are not in any contractual relationship with our company. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-ADCT-1545PD-KCPK30-Kennametal 40END
ADCT 1545PD KCSM40 Indexable Insert - Kennametal
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Send us your drawing directly by e-mail.► Send us your sample insert or drawing directly by post. Product specifications ADCT 1545PD indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: ADCT1545PDSRLD-KCSM40-KENNAMETAL Dataand Figures: ISO-Code: ADCT1545PD Clearance Angle: 15° Angle: 85° Special features Material: cemented carbide Grade: KCSM40 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-ADCT-1545PD-KCSM40-Kennametal 40END
ADCT 1545PD KCSM40 Indexable Insert - Kennametal
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Performance features for insert ADCT 1545PD from Kennametal Brand: Kennametal Manufacturer Order Number: ADCT1545PDERLD-KCSM40-KENNAMETAL Dataand Figures: ISO-Code: ADCT1545PD Clearance Angle: 15° Angle: 85° Special features Material: cemented carbide Grade: KCSM40 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-ADCT-1545PD-KCSM40-Kennametal 40END
ADGT0803PER-D51 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S grade for enhanced tool life and consistent chip control; benefit from the insert’s suitability for both steel and cast iron and order via Metav Werkzeuge or request advice from our consultants. ADGT0803PER-D51 WKP25S milling insert — Walter Tools, coated carbide for steel & cast iron The ADGT0803PER-D51 WKP25S is a coated carbide milling insert designed for reliable material removal in steel and cast iron applications, offering a balanced mix of wear resistance and process security. Tiger·tec Silver coated carbide grade Optimised for steel and cast iron machining Parallelogram 85° geometry for versatile use 15° clearance angle for stable cutting Consistent machining for steel and cast iron The insert is engineered for predictable performance when machining steel and cast iron. Thanks to the WKP25S grade and the Tiger·tec Silver coating, thermal and abrasive wear are controlled, which translates into longer tool life and fewer interruptions in production. The grade is a coated carbide formulation tuned for the heat and chip characteristics typical of these workpiece groups; this means improved dimensional stability across batch runs and reduced scrap rates. For shops aiming to raise throughput without sacrificing component quality, this insert provides a measurable improvement in process reliability. Geometry that supports secure cutting and access A parallelogram 85° form combined with a 15° clearance delivers a robust cutting edge and flexible approach angles. The geometry reduces cutting forces on the toolholder while maintaining effective chip evacuation; the result is stable chip formation and less risk of edge chipping under intermittent cuts. The insert’s profile also enables close-up machining of shoulders and complex contours, allowing an efficient tool setup that reduces the need for multiple dedicated cutters and shortens cycle times. Advanced coating and grade for improved uptime The Tiger·tec Silver surface technology and the WKP25S coating system work together to reduce flank wear and increase resistance to built-up edge. Coating benefits include lower friction at the cutting interface and better heat dispersion, which helps maintain surface finish and prolong tool life. The included chipbreaker D51 supports repeatable chip control in mixed machining scenarios; fewer long chips improve safety and reduce manual chip handling, contributing directly to a cleaner, more productive machining environment. Integration into production and handling advantages With a compact plate size and a plate thickness coded as 03, the insert fits standard toolholders designed for this insert family and allows straightforward indexation when an edge change is required. The parallel geometry and tolerance class G ensure interchangeability within the same product line, simplifying inventory management and reducing setup complexity. Support documentation from the manufacturer clarifies recommended cutting data for various steels and cast irons, making it easier to adopt the insert into existing programmes and to achieve consistent surface quality and cycle-time improvements. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Walter Tools ADGT0803PER-D51 WKP25S for robust, high‑efficiency milling operations Technical data SKU: ADGT0803PER-D51-WKP25S-WALTER Designation: ADGT0803PER-D51 WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP25S Facts Insert size: 08 Plate thickness: 03 Clearance angle: 15° Form: Parallelogram 85° Tolerance class: G Special features Coated carbide (described as coated hard metal) Chipbreaker: D51 Execution: T Material applicability: Steel (P), Cast iron (K) Suitability: Optimised for typical steel heat and chip behaviour FAQ What workpiece materials is this insert suited for? The ADGT0803PER-D51 WKP25S from Walter Tools is optimised for steel and cast iron (ISO groups P and K), with the WKP25S grade specifically tuned to those materials. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the ADGT0803PER-D51 WKP25S improves heat resilience and reduces friction, resulting in extended edge life and more consistent surface finish during continuous machining. What is the significance of the parallelogram 85° form? The parallelogram 85° geometry provides a strong cutting edge and flexible approach angles, enabling secure cutting forces and better access for shoulder and contour milling operations. Which chipbreaker is fitted and what does it do? This insert features the chipbreaker D51, which supports controlled chip formation in mixed steel and cast iron applications, minimising long stringy chips and aiding safe, efficient chip evacuation. Is the insert compatible with common toolholders? The insert’s dimensions and tolerance class G align with standard toolholder requirements for this insert family, allowing easy indexation and replacement within established tool systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned manufacturers; the offered article is an original, brand‑new product of the specified manufacturer.
ADGT0803PER-D51 WKP35G WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high process security and broad material capability offered by the Tiger·tec Gold grade; the coated carbide grade WKP35G delivers stable edge life and reliable chip control for continuous machining of steel and cast iron. Order the ADGT0803PER-D51 WKP35G directly via Metav Werkzeuge or ask the consultants for application advice. ADGT0803PER-D51 WKP35G milling indexable insert, Tiger·tec Gold, for steel and cast iron — Walter Tools The ADGT0803PER-D51 WKP35G is a precision milling indexable insert designed for efficient machining of steel and cast iron, combining Tiger·tec Gold coating technology with a D51 chipbreaker geometry Tiger·tec Gold coated carbide grade Suited for steel and cast iron machining Parallelogram 85° positive geometry 15° clearance angle for reduced cutting forces Faster, predictable production through optimised grade and coating The combination of the Tiger·tec Gold technology and the WKP35G grade provides a balance between wear resistance and toughness that supports extended tool life and consistent performance across mixed batches of unalloyed and alloyed steels as well as cast iron. The coated carbide construction ensures improved resistance to the thermal and abrasive loads typical in milling operations. This translates directly into fewer tool changes and a more stable process, which is particularly valuable for medium- to high-volume production runs where repeatability and uptime are priorities. Geometry that improves chip control and surface finish A parallelogram 85° insert form, paired with the chipbreaker D51 and a 15° clearance angle, is engineered to control chip formation and evacuate swarf reliably. The positive geometric layout reduces cutting forces and vibration, aiding in the generation of consistent surface quality and dimensional accuracy. The coded plate size (08) and plate thickness (03) are compatible with standard toolholders that accept this format, allowing straightforward integration into existing milling setups while preserving rigidity and stability during interrupted cuts. Process security, tolerance and workshop benefits Supplied in tolerance class G and execution T, this insert supports repeatable seating and concentricity in indexable milling systems, which is essential for serial production and tight tolerance work. The grade’s suitability for P and K workpiece groups (steel and cast iron) means a single insert family can cover a broad material spectrum, reducing inventory complexity. As a Walter Tools product, the insert benefits from established tooling know-how and quality control, offering reliable performance that helps protect productivity and reduces the frequency of costly rework. Contact Metav Werkzeuge for tailored cutting data and availability of the Tiger·tec Gold WKP35G insert; call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange technical consultation or supply Technical Data Article number: ADGT0803PER-D51-WKP35G-WALTER Label: Fräswendeschneidplatte ADGT0803PER-D51 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger·tec Gold Grade / Sort: WKP35G Form: Parallelogram 85° Chipbreaker: D51 Material application: P / K Numbers / Core Technical Data Free angle: 15° Plate size: 08 Plate thickness: 03 Tolerance class: G Designs / Special Features Coated carbide grade WKP35G Suited for steel and cast iron machining Execution: T Stable chip formation and broad material coverage FAQ What materials is this insert suitable for? The ADGT0803PER-D51 WKP35G is designed for machining steel and cast iron (ISO groups P and K) thanks to the WKP35G coated carbide grade and Tiger·tec Gold technology. How does the D51 chipbreaker affect machining? The chipbreaker D51 promotes controlled chip formation and evacuation, reducing recutting and improving surface quality when the insert is used under recommended cutting conditions. Which geometry helps when machining interrupted cuts? The parallelogram 85° form offers mechanical stability and contributes to lower cutting forces, making the insert suitable for interrupted milling and increased robustness in heavy engagement operations. Is this insert compatible with common toolholders? The plate format (size 08, thickness 03) and parallelogram design are compatible with standard milling toolholder families that accept this insert style; verify holder compatibility before assembly. What process advantages does the Tiger·tec Gold series provide? Tiger·tec Gold combines enhanced wear resistance with thermal stability, supporting longer tool life and consistent performance across mixed production of steels and cast irons. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names are used for clarification only. There is no affiliation between our company and the brands named. The offered item is an original, factory-new product of the manufacturer.
ADGT0803PER-D51 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver wear resistance, a dedicated WKP35S grade for steel and cast iron, and the D51 chipbreaker for consistent chips — a setup that boosts productivity and reduces tool change frequency. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. ADGT0803PER-D51 WKP35S milling insert for steel and cast iron | Walter Tools ADGT0803PER-D51 WKP35S is an indexable milling insert designed for versatile roughing and semi-finishing in steels and cast irons, optimised for secure chip control and long tool life Tiger·tec Silver coating for high wear resistance Optimised chipbreaker D51 for consistent chips Parallelogram 85° shape for flexible engagement Suitable for steel and cast iron machining Increased throughput with a high-performance grade The combination of the WKP35S grade and the Tiger·tec Silver coating delivers reliably low wear and sustained cutting-edge stability, which translates into longer tool life and fewer interruptions in production. The insert is formulated for the thermal and mechanical demands of machining group P (steel) and group K (cast iron) according to ISO 513. For operations where predictable performance matters, the coated hardmetal substrate and the specified grade reduce flank wear and preserve cutting geometry, leading to more consistent cycle times and improved overall process economy. Predictable chip formation and surface quality Equipped with the D51 chipbreaker and a parallelogram 85° form, the insert stabilises chip flow and helps avoid irregular breakage that can damage the workpiece or tool. The 15° clearance angle supports controlled shear and minimises rubbing on the flank, favouring better surface finish and dimensional stability. Explaining the term: a chipbreaker is an engineered groove on the cutting face that shapes and segments chips, preventing long, stringy swarf and reducing the risk of tool or machine downtime. Geometry and fit for flexible milling strategies The insert designation indicates a compact size and consistent mounting: the ADGT0803PER-D51 form with plate size 08 and thickness 03 fits standard cutter bodies designed for parallelogram inserts. The execution marked "T" and tolerance class G ensure repeatable seating and interchangeability across compatible cutter heads, enabling quick index changes and maintaining process repeatability. Metav Werkzeuge supplies compatible holders and can advise on the correct seat and clamp type for specific cutter systems. Practical advantages in everyday production Using an insert optimised for both steel and cast iron reduces the need for multiple tool inventories and simplifies setup for mixed-material batches. The coated hardmetal construction improves resistance to abrasive wear common when finishing cast components, while the grade control helps manage the heat generated when machining steels. This balance of durability and versatility supports leaner tool strategies and contributes to a lower cost per component over extended running periods. Implementation notes and application scope The insert is particularly suited to roughing and semi-finish passes where chip control and robustness matter most. For finishing operations requiring mirror-like surfaces, complementary grades or toolpaths might be considered. The insert’s properties make it a practical choice for medium to heavy material removal on conventional and CNC milling machines within industrial production environments. For specific cutting data and recommended parameters for certain steel or cast-iron alloys, Metav Werkzeuge can provide detailed guidance and testing references. For application-specific recommendations or to confirm compatibility with a particular cutter body, contact Metav Werkzeuge for technical advice and ordering support — Metav Werkzeuge is available to assist with optimal tool selection and cutting data. Technical data SKU: ADGT0803PER-D51-WKP35S-WALTER Article designation: ADGT0803PER-D51 WKP35S Manufacturer: Walter Tools Product type: Milling insert Series: Tiger·tec Silver Facts Free angle (clearance): 15° Insert size: 08 Thickness: 03 Tolerance class: G Special features Coating: Tiger·tec Silver Grade: WKP35S Chipbreaker: D51 Shape: Parallelogram 85° Material suitability: Steel (P) and Cast iron (K) Execution: T FAQ Which materials are suitable for this insert? The ADGT0803PER-D51 WKP35S milling insert (Walter Tools) is designed for machining ISO group P (steel) and ISO group K (cast iron), offering balanced wear resistance for both material families. What does the WKP35S grade provide? WKP35S is a Walter Tools coated hardmetal grade that, in combination with the Tiger·tec Silver coating, provides improved abrasion resistance and edge stability for demanding steel and cast-iron applications. How does the D51 chipbreaker affect machining? The D51 chipbreaker on the ADGT0803PER-D51 WKP35S insert shapes chips into short, manageable segments, reducing chip-related interruptions and contributing to a consistent surface finish. What is the significance of the parallelogram 85° form? The parallelogram 85° geometry enables flexible cutting engagements and varied approach angles, improving the insert’s applicability across different milling strategies while maintaining robust edge support. Which cutter bodies accept this insert designation? The ADGT0803PER-D51 WKP35S designation corresponds to standard parallelogram-style seats sized for insert size 08 and thickness 03; use of matching Walter Tools or compatible cutter bodies is recommended for correct mounting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation or partnership implied between Metav Werkzeuge and the trademark owners. The offered item is an original, brand-new product from the manufacturer.
ADGT0803PER-D51 WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WSP45G grade and a robust D51 chipbreaker results in extended tool life and controlled chip formation during milling of steel, stainless steel and heat-resistant alloys. Order the ADGT0803PER-D51 WSP45G inserts directly via Metav Werkzeuge or request cutting-data support from our consultants to integrate them into production quickly. ADGT0803PER-D51 WSP45G milling insert, parallelogram 85°, Tiger·tec Gold — Walter Tools The ADGT0803PER-D51 WSP45G is a coated carbide indexable insert designed for versatile face and profile milling across steel, stainless steel and superalloys, offering durable edges and consistent chip control. Tiger·tec Gold coating for extended tool life Versatile P/M/S grade for steel, stainless, superalloys Parallelogram 85° form for stable cutting 15° relief angle for secure edge engagement Dependable wear resistance for high productivity The combination of the Tiger·tec Gold coating and the WSP45G PVD grade yields a coated carbide structure optimised for sustained performance. This composition supports improved wear resistance and stable flank life under the thermal and mechanical stresses typical in milling operations. The result is fewer indexings, longer tool cycles and a reduced total cost of machining when compared with uncoated or conventional grades. Such durability is particularly beneficial for repetitive production runs where consistent tool life directly supports predictable throughput. Precision geometry for consistent surface finish The parallelogram 85° form and 15° relief angle create a cutting geometry that promotes secure engagement and controlled cutting forces. The shape helps maintain a constant contact angle between the cutting edge and workpiece, which reduces chatter and improves surface integrity. In finishing passes, this geometry supports repeatable dimensional accuracy and better workpiece appearance. For workshop planners, the stable cutting behaviour translates into less rework and a more consistent quality level across batches. Efficient chip control reduces machining interruptions Equipped with the D51 chipbreaker, the insert is engineered to form manageable chips across a range of cutting depths and feed rates. Effective chip control lowers the risk of built-up edge and prevents clogging in tight flute patterns, which in turn reduces machine downtime for clearing chips. The chipbreaker design also supports safer handling and improved coolant contact at the cutting zone, contributing to thermal stability and sustained edge integrity during medium to heavy milling operations. Flexible performance across demanding materials The grade is explicitly suitable for the ISO material groups P, M and S, meaning the insert handles unalloyed and alloyed steel, stainless steel and heat-resistant superalloys/titanium. Its balanced ductility and coating technology allow secure chip formation when machining tougher or more adhesive materials. The solution is therefore appropriate for job shops and production environments in automotive, mechanical engineering and aerospace where mixed-material batches and high process reliability are required. Contact Metav Werkzeuge for tailored cutting data and to secure Walter Tools ADGT0803PER-D51 WSP45G inserts for production; technical consultants are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: ADGT0803PER-D51-WSP45G-WALTER Manufacturer: Walter Tools Type: Fräswendeschneidplatte Series: Tiger·tec Gold Grade: WSP45G Facts Relief angle: 15° Plate form: Parallelogram 85° Plate size: 08 Plate thickness: 03 Chipbreaker: D51 Tolerance class: G Execution: T Special features Coating / grade: Tiger·tec Gold, WSP45G (coated carbide) Suitable for: Steel (P), Stainless steel (M), Superalloys and titanium (S) Application: versatile milling for face and profile operations Robust chip control and stable cutting edge FAQ Which materials are best machined with this insert? The ADGT0803PER-D51 WSP45G insert (Walter Tools) is suitable for ISO groups P, M and S — that is steel, stainless steel and heat-resistant superalloys/titanium. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSP45G grade increases wear resistance and thermal stability, extending edge life and supporting consistent performance in milling. How does the parallelogram 85° form affect machining? The parallelogram 85° geometry promotes steady cutting engagement and reduced vibration, which helps achieve consistent surface finish and dimensional repeatability. What role does the D51 chipbreaker play? The D51 chipbreaker is designed for controlled chip formation across a range of cutting conditions, lowering the risk of built-up edge and reducing interruptions for chip clearing. For which applications is this insert particularly suited? This indexable insert is well suited to versatile face and profile milling tasks in sectors requiring process reliability, such as automotive components, general engineering and aerospace structural parts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for descriptive purposes only and do not imply any affiliation or endorsement. The offered article is an original, factory-new product of the manufacturer.
ADGT0803PER-F56 WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for stable edge life and reliable chip formation in demanding materials; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Fräswendeschneidplatte ADGT0803PER-F56 WSM35G — indexable milling insert with Tiger·tec Gold coating by Walter Tools Fräswendeschneidplatte ADGT0803PER-F56 WSM35G is an indexable milling insert designed for heavy-duty machining of rostfreier Stahl and heat‑resistant superalloys, offering a robust coated-carbide grade and a geometry optimised for secure chip control Tiger·tec Gold coating for thermal stability Optimised chipbreaker F56 for secure chip control Parallelogram 85° form with 15° free angle Suitable for rostfreier Stahl and superalloys Superior coating that extends cutting performance The Tiger·tec Gold surface treatment combined with the WSM35G grade delivers improved wear resistance and heat tolerance for prolonged cutting intervals. This coating system is engineered to reduce built-up edge formation when machining tough-to-cut materials, which in turn maintains a consistent cutting edge and reduces downtime for tool changes. For production environments where cycle time and repeatability matter, the coated-carbide chemistry provides a tangible improvement in tool life and process stability. Geometry and chip management that protect the cutting edge The parallelogram 85° plate geometry together with a 15° free angle and the F56 chipbreaker work in concert to stabilise the cutting process. The insert’s form directs chips away from the cutting zone and minimises adverse contact, which preserves the tool edge. As a result, operators benefit from predictable surface finish and reduced risk of edge chipping when tackling heavy cross-sections or interrupted cuts—advantages that are particularly relevant in rostfreier Stahl and titanium-rich nickel alloys. Application focus: consistent results on demanding materials This insert is tailored for materials classified under M and S in ISO 513: rostfreier Stahl and heat‑resistant superalloys or titanium. The combination of grade and geometry supports reliable chip formation and thermal resistance, helping to avoid common issues such as work hardening and thermal softening of the cutting edge. In practical terms, the result is fewer tool interventions, a steadier process window and improved component quality during series production. Practical benefits for workshop efficiency With a compact insert thickness 03 and tolerance class G, the component integrates into standard toolholders with predictable mounting accuracy. The plate’s profile and stable coating enable efficient material removal rates while safeguarding dimensional repeatability. For shops aiming to raise throughput without compromising surface integrity, the insert contributes to smoother scheduling, fewer reworks and a more predictable consumption of cutting tools. Contact Metav Werkzeuge to discuss how the Tiger·tec Gold ADGT0803PER-F56 WSM35G insert fits specific rostfreier Stahl or superalloy applications and to reserve inventory under SKU ADGT0803PER-F56-WSM35G-WALTER Technical Data Article number: ADGT0803PER-F56-WSM35G-WALTER SKU: ADGT0803PER-F56-WSM35G-WALTER Product type: Fräswendeschneidplatte Facts Plate size: 08 Thickness: 03 Free angle: 15° Plate form: Parallelogram 85° Tolerance class: G Special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Chipbreaker: F56 Material suitability: rostfreier Stahl; superalloys / titanium Series: Tiger-tec Gold Execution: T FAQ What materials is this insert best suited for? The Fräswendeschneidplatte ADGT0803PER-F56 WSM35G is designed primarily for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering a coated-carbide grade that supports secure chip formation. Which geometry features improve chip control? The parallelogram 85° form, combined with the F56 chipbreaker and a 15° free angle, enhances chip evacuation and reduces cutting forces, which helps to maintain edge integrity during heavy cuts. Is the coating suitable for high-temperature applications? Yes, the Tiger·tec Gold coating on the WSM35G grade is formulated for thermal stability and wear resistance, making it appropriate for elevated cutting temperatures encountered with rostfreier Stahl and superalloys. Can this insert be used in standard milling toolholders? The insert’s dimensions and tolerance class G ensure compatibility with common indexable milling toolholders designed for this plate format; verify holder compatibility with the ADGT0803PER-F56 geometry. What is the recommended way to order or get advice? For application-specific recommendations and availability, contact Metav Werkzeuge referencing SKU ADGT0803PER-F56-WSM35G-WALTER to ensure the correct grade and geometry for the task. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT0803PER-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a high-performance PVD-coated Tiger·tec Gold grade that combines reliable edge stability and broad material suitability for efficient milling operations; the insert’s chipbreaker F56 and 15° clearance angle improve chip control and surface quality while supporting longer tool life. Order directly via Metav Werkzeuge or contact their specialists for application advice. ADGT0803PER-F56 WSP45G — Milling insert (Tiger·tec Gold) by Walter Tools, for steel / stainless / superalloys ADGT0803PER-F56 WSP45G is a PVD-coated carbide milling insert engineered for versatile milling tasks in steel, stainless steel and heat-resistant superalloys. Tiger·tec Gold PVD coating Suitable for steel, stainless, superalloys Parallelogram 85° shape for stability 15° clearance angle for secure cutting Versatile PVD-coated grade for productive milling The Tiger·tec Gold grade WSP45G offers a balance of toughness and wear resistance that suits a wide range of milling tasks. As a PVD-coated carbide solution, this insert supports predictable wear progression and stable edge life, which reduces unscheduled tool changes and contributes to a steady production rhythm. The combination of coating technology and substrate hardness enables consistent results when machining common structural steels as well as more demanding stainless grades. Geometry built for cutting stability and repeatability The parallelogram 85° plate form together with a 15° clearance angle delivers a stable cutting geometry that reduces vibration and supports good surface finish in through-cut and slotting operations. With an insert size 08 and thickness 03, the design provides an adequate support area in the seat for reliable clamping and repeatable positioning, while the tolerance class G ensures dimensional consistency across batches — important when quick insert indexing is part of the production cycle. Controlled chip formation and application range The chipbreaker F56 is optimised for secure chip formation across the P/M/S material groups. This means better evacuation of swarf when cutting both low-alloy steels and stainless steels, and improved control when machining heat-resistant superalloys or titanium where poor heat dissipation can overburden the cutting edge. The insert’s construction supports mixed-shop flexibility: one grade covers several material classes, reducing tool inventory complexity without compromising performance. Productivity and application advice for milling processes Used in general-purpose and semi-finishing milling routines, this insert contributes to predictable cycle times and lower total tooling effort. The robust edge and coating combination helps to maintain dimensional accuracy over longer runs, translating into fewer interruptions and higher throughput. For best results, pair the insert with suitably rigid toolholders and adjust cutting data to the workpiece material; Metav Werkzeuge consultants can provide tailored recommendations for feed and speed settings based on specific machine and application parameters. Discuss specific machining requirements with Metav Werkzeuge and secure the ADGT0803PER-F56 WSP45G to enhance milling stability and tool life — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for application-focused advice Technical data SKU: ADGT0803PER-F56-WSP45G-WALTER Designation: ADGT0803PER-F56 WSP45G Type: Milling insert (fräswendeschneidplatte) Brand: Walter Tools Series: Tiger·tec Gold Core specifications Clearance angle: 15° Insert size: 08 Thickness: 03 Plate form: Parallelogram 85° Tolerance class: G Chipbreaker: F56 Materials & features Grade: WSP45G (PVD-coated carbide) Applicable materials: steel (P), stainless steel (M), superalloys / titanium (S) Execution: T Benefits: stable chip formation, versatile P/M/S performance, wear-resistant coating FAQ What materials is this insert suited for? The ADGT0803PER-F56 WSP45G from Walter Tools is suitable for machining steel, stainless steel and heat-resistant superalloys/titanium (material groups P, M and S). What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating on this insert improves wear resistance and edge stability, so the ADGT0803PER-F56 WSP45G maintains cutting performance over longer runs. How does the chipbreaker F56 affect machining? Chipbreaker F56 promotes secure chip formation and reliable evacuation, supporting improved surface quality and reduced risk of built-up edge when milling diverse materials. Why is the parallelogram 85° form beneficial? The parallelogram 85° geometry increases cutting stability and reduces vibration, which helps achieve consistent finishes and repeatable tool indexing for the ADGT0803PER-F56 WSP45G. What role does the 15° clearance angle play? The 15° clearance angle provides a favourable balance between edge support and cutting clearance, contributing to secure cutting action and extended insert life. The Walter AG (brand presentation: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADGT10T330R-D67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold durability, a robust 3 mm corner radius and a parallelogram geometry for reliable chip control and consistent production results; order directly via Metav Werkzeuge or consult the specialists for process optimisation. ADGT10T330R-D67 WSP45G — Parallelogram 85° milling insert with Tiger·tec Gold coating (Walter Tools) A high-performance ADGT10T330R-D67 WSP45G milling insert designed for versatile milling tasks across Stahl, rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Gold PVD-coated carbide WSP45G Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 85° insert with 15° relief angle 3 mm corner radius for robust edge stability Productivity through a proven cutting concept The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a balanced performance that targets high productivity in milling operations. The PVD layer increases resistance to abrasive wear while maintaining edge toughness, which supports stable cutting and reliable tool life when machining common construction and alloyed materials such as Stahl. The coated carbide substrate is engineered for repeatable performance across shifting workpiece batches, reducing unexpected tool changes and downtime. By favouring process certainty, the insert helps secure cycle times and throughput in serial production. Geometry designed for secure chip control and edge stability The parallelogram 85° shape together with a 15° relief angle and a 3 mm corner radius creates a geometry that balances strength and accessibility. The insert form provides favourable entry angles for slotting and shoulder milling, while the D67 chipbreaker supports predictable chip formation under varying cutting conditions. The T3 plate thickness increases rigidity at the cutting edge, improving resistance to chipping during interrupted cuts and lending itself to heavier milling passes where edge stability is crucial. These geometric features translate into fewer reworks and consistent surface quality. Versatility and application focus for process optimisation Rated for material groups P, M and S (as indicated by the designation P / M / S), this grade is suitable for operations that require adaptability between general-purpose steels, rostfreier Stahl and heat‑resistant alloys or titanium components. The insert’s construction supports secure performance in mixed-production environments where tool changes must be minimised. Selecting this grade can contribute to predictable tool life and easier tooling standardisation across machine parks, supporting leaner inventory and more straightforward tooling strategies. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Gold inserts or to request procurement: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: ADGT10T330R-D67-WSP45G-WALTER Designation: ADGT10T330R-D67 WSP45G Product type: Fräswendeschneidplatte Facts Relief angle: 15° Corner radius: 3 mm Insert size: 10 Plate thickness: T3 Shape: Parallelogram 85° Tolerance class: G Special features Series: Tiger-tec Gold Grade / coating: WSP45G (PVD-coated carbide) Material groups: P / M / S Chipbreaker: D67 Execution: T FAQ Which materials are suited to this insert? The ADGT10T330R-D67 WSP45G insert from Walter Tools is intended for machining Stahl, rostfreier Stahl and heat‑resistant superalloys, consistent with the P / M / S designation of the WSP45G grade. Is the geometry suitable for roughing and semi‑finishing? Yes, the parallelogram 85° form together with the D67 chipbreaker and a 3 mm corner radius allows for robust roughing passes and controlled semi‑finishing while maintaining edge stability. What advantages does the Tiger·tec Gold grade bring? The Tiger·tec Gold technology provides a PVD coating that enhances wear resistance and edge life, offering stable cutting performance and improved process security in diverse milling applications. Can this insert support interrupted cuts and heavy engagement? The T3 plate thickness, 3 mm corner radius and sturdy geometry of the ADGT10T330R-D67 WSP45G promote resistance to chipping and secure cutting under intermittent loads, supporting heavier engagement values when required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT10T3PER-D67 WKP35G Wendeplatten - Walter Tools
Benefit from a balanced combination of Tiger·tec Gold coating and robust chip control for consistently productive milling; the insert delivers long tool life and reliable performance in steel and cast iron applications. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ADGT10T3PER-D67 WKP35G milling insert — Tiger·tec Gold coated, for steel and cast iron, Walter Tools ADGT10T3PER-D67 WKP35G is a precision milling insert designed for versatile engagement in general-purpose and heavy-duty milling of steels and cast irons. Tiger·tec Gold coating for extended life Optimised D67 chipbreaker geometry Parallelogram 85° form for versatile engagement Designed for steel and cast iron machining Proven coating that extends productive tool life The Tiger·tec Gold coating, paired with the WKP35G grade, provides a durable, wear-resistant cutting edge engineered for repeatable performance. This coated carbide formulation is optimised for the thermal and mechanical demands of machining P- and K-group materials, which translates into sustained cutting edges and fewer insert changes. For operations where cycle time and tool-change frequency directly affect throughput, this surface treatment helps to reduce downtime and maintain consistent component quality by resisting abrasive wear and chipping. Geometry and chip control that lift throughput A dedicated chipbreaker, designated D67, and the insert’s parallelogram 85° form work together to control chip formation and evacuation during milling. The combination of the chipbreaker geometry and the insert shape promotes short, manageable chips when cutting steels and cast irons, reducing the risk of entanglement and improving surface finish. The specified 15° clearance angle aids in avoiding rubbing and lowers cutting forces, enabling higher material removal rates while protecting the toolholder and spindle from undue loads. Broad material compatibility with clear application guidance This grade is validated for machining both steel (P) and cast iron (K) in accordance with ISO grouping conventions. That means the insert is tailored to cope with the high temperatures and ductile chip forms of steels, as well as the abrasive and often brittle chips from cast irons. For operations that mix workpiece types, the coated carbide and chip geometry offer a pragmatic compromise: reliable edge stability for steels and controlled wear behaviour for cast irons. Selection should consider workpiece hardness and component geometry to match cutter diameter and engagement. Consistent tolerance, series quality and practical handling Manufactured to tolerance class G and supplied in the Tiger·tec Gold series, the component emphasises reproducibility and dimensional reliability across batches. The insert thickness T3 and size designation 10 support defined clamping engagement and flute fill in standard milling cutters. Such specification clarity makes tool presetting and inventory management more efficient, while the standardized form simplifies changeover in high-mix production environments. The result is predictable tool life and easier process planning. For high-throughput milling with proven Tiger·tec Gold performance, order the Walter Tools ADGT10T3PER-D67 WKP35G via Metav Werkzeuge or request tailored application advice from our specialists. Technical data Article number: ADGT10T3PER-D67-WKP35G-WALTER Product type: milling insert Series: Tiger-tec Gold Grade: WKP35G Material suitability: Steel (P) / Cast iron (K) Insert size: 10 Thickness: T3 Shape: Parallelogram 85° Clearance angle: 15° Chipbreaker: D67 Execution: T Tolerance: class G Manufacturer: Walter Tools Facts SKU: ADGT10T3PER-D67-WKP35G-WALTER Coating: Tiger·tec Gold (coated carbide) Primary application: milling of P and K groups Series designation: Tiger·tec Gold Tolerance class: G Special features Coated carbide grade for improved wear resistance Optimised chip control geometry Parallelogram form for flexible cut entry angles Designed for catalogue-geometry dependent milling tasks FAQ What materials is this insert suitable for? The ADGT10T3PER-D67 WKP35G insert is specified for steel (P) and cast iron (K) in line with ISO material groupings, making it appropriate for a wide range of standard milling tasks in these materials. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WKP35G grade increases abrasive wear resistance and edge stability, which helps to extend service life and maintain component quality over longer production runs. What role does the D67 chipbreaker play? The D67 chipbreaker promotes short, controlled chips and reliable evacuation, reducing the likelihood of chip-related interruptions and improving surface finish during milling of steel and cast iron. Is this insert suited for stainless steel? Stainless steel suitability is not indicated for this grade; the ADGT10T3PER-D67 WKP35G is optimised for P and K groups. For austenitic or difficult-to-machine stainless steels, a dedicated grade should be selected. What does the parallelogram 85° form mean for cutter setup? The parallelogram 85° form allows versatile engagement angles and can improve accessibility in certain cutter head designs; it is especially useful when axial and radial engagements vary across an operation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for clarification of product origin. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
ADGT10T3PER-D67 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and the WKP35S grade for extended tool life and reliable chip control; the parallelogram 85° form and 15° clearance angle ensure stable engagement and consistent part quality. Order directly via Metav Werkzeuge or consult our technical team for application support. ADGT10T3PER-D67 WKP35S milling insert – Tiger‑tec Silver coating for steel and cast iron (Walter Tools) The ADGT10T3PER-D67 WKP35S is a precision parallelogram 85° milling insert optimised for productive machining of steel and cast iron in demanding milling operations Tiger‑tec Silver coating for wear resistance WKP35S grade for steel and cast iron Parallelogram 85° form for stable milling 15° clearance angle for versatile engagement Increased productivity through a wear‑resistant coating and robust grade The combination of the Tiger‑tec Silver coating and the WKP35S grade delivers noticeably improved wear resistance and edge stability compared with uncoated grades. Coated carbide technology reduces flank wear and extends the useful life of the insert during continuous milling operations, which translates into fewer indexings and lower tool-change downtime. For workshops processing a mix of steel and cast iron, this means more consistent cycle times and reduced tool consumption without compromising surface finish. Geometry that improves process stability and surface quality The parallelogram 85° form provides a secure cutting engagement and helps distribute cutting forces evenly across the insert, reducing vibration in interrupted or heavy cuts. Combined with a 15° clearance angle, the geometry supports varied entry angles and chip formation, enabling stable milling across a range of feeds. The modest T3 thickness contributes to reliable clamping in standard toolholders while maintaining the rigidity required for repeatable machining, so part tolerances remain intact even during medium‑duty milling. Better chip control and predictable machining results The integrated chipbreaker D67 is designed to promote manageable, short chips in mixed materials, which helps maintain coolant flow and prevents recutting. As an indexable insert, the component allows fast reorientation to a fresh cutting edge, minimising stoppages and supporting sustained productive machining. For production environments where process reliability matters, these characteristics reduce scrap rates and support stable throughput across batches. Clear indications for material suitability and tool integration This insert is specified for machining steel (P) and cast iron (K) in accordance with the grade designations; it is not indicated for rostfrei (stainless) applications in the provided data. The designation and tolerance class G ensure consistent fitment in compatible holders, and the compact plate size 10 suits applications where a smaller insert footprint is required without sacrificing edge strength. When pairing the insert with tooling, choose holders certified for the parallelogram geometry to preserve clamping integrity and repeatability. For reliable results with Walter Tools’ Tiger‑tec Silver inserts, contact Metav Werkzeuge for application guidance or to arrange supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: ADGT10T3PER-D67-WKP35S-WALTER Designation: ADGT10T3PER-D67 WKP35S Manufacturer: Walter Tools Facts Free angle: 15° Plate form: Parallelogram 85° Plate size: 10 Thickness: T3 Tolerance class: G Chipbreaker: D67 Special features Coating: Tiger‑tec Silver Grade: WKP35S (coated carbide) Material suitability: Steel (P) and Cast iron (K) Series: Tiger‑tec Silver FAQ What materials is this insert suitable for? The ADGT10T3PER-D67 WKP35S milling insert is specified for steel (P) and cast iron (K) applications according to the grade designation WKP35S. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the Walter Tools insert reduces abrasive wear and improves edge life, which supports longer tool cycles and more consistent surface finishes in daily production. What role does the chipbreaker D67 play? The D67 chipbreaker promotes short, controlled chips in mixed materials, improving chip evacuation and reducing the risk of recutting during milling. Why is the parallelogram 85° form important? A parallelogram 85° insert distributes cutting forces more evenly and enhances stability in interrupted cuts, helping to maintain dimensional accuracy and reduce tool vibration. How is the designation ADGT10T3PER-D67 WKP35S structured? The designation describes the insert geometry and size (ADGT10T3PER-D67) coupled with the WKP35S coated carbide grade; the SKU ADGT10T3PER-D67-WKP35S-WALTER uniquely identifies the Walter Tools article. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named manufacturers. The offered article is original, factory‑new goods from the manufacturer (Walter Tools).
ADGT10T3PER-D67 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance and the WSM35G grade for secure chip formation and long tool life when machining stainless steels and heat‑resistant superalloys; order the ADGT10T3PER‑D67 WSM35G inserts directly via Metav Werkzeuge or consult our specialists for application advice. ADGT10T3PER‑D67 WSM35G milling insert — for stainless steel and superalloys, Tiger·tec Gold by Walter Tools The ADGT10T3PER‑D67 WSM35G milling insert is engineered to deliver stable cutting edges and controlled chip evacuation for demanding applications in stainless steels and heat‑resistant superalloys. Tiger·tec Gold coating for long tool life Designed for stainless steel and superalloys Parallelogram 85° for stable cutting edge 15° clearance angle; secure chip flow High reliability for tough materials and continuous processes The coated grade WSM35G from Tiger·tec Gold is designed to maintain a stable cutting edge under thermal and mechanical load, which directly improves process reliability and reduces unplanned tool changes. For machining stainless steels and superalloys, the insert’s composition and coating promote secure chip control, limit cold welding and edge build‑up, and support consistent surface quality. This delivers measurable productivity benefits in medium‑to‑high duty milling operations where repeatable performance is essential. Geometry focused on edge stability and chip management The parallelogram 85° form combined with a 15° free angle and T3 thickness provides a robust seating and an advantageous cutting orientation that stabilises the insert under intermittent and continuous cuts. The integrated chipbreaker D67 shapes chips to avoid tangling and to foster steady evacuation, which helps maintain cutting parameters and tool life. The design reduces vibration transmission and improves dimensional accuracy on workpieces that demand consistent finishes. Clear suitability and material guidance The insert’s designation and material grouping indicate suitability for ISO groups M (stainless steels) and S (heat‑resistant superalloys and titanium). In practice, the WSM35G grade is a coated carbide arranged to withstand high temperatures and abrasive conditions typical for these materials; it therefore supports machining strategies that prioritise edge life and stable material removal. Selection of matching cutter bodies and correct clamping torque ensures the geometry’s advantages are fully realised. Practical handling and process integration With tolerance class G and the standardised ISO designation, the insert is intended for straightforward replacement and predictable tool offsets in milling systems. The insert’s technical characteristics enable planners to define cutting data with reduced safety margins, improving throughput without compromising surface integrity. For specific application parameters or verification against machine capabilities, Metav Werkzeuge provides tailored advice and can assist with compatibility checks and batch availability. Contact Metav Werkzeuge for application support and immediate availability of Walter Tools ADGT10T3PER‑D67 WSM35G inserts via phone or email: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: ADGT10T3PER-D67-WSM35G-WALTER Name: Fräswendeschneidplatte ADGT10T3PER‑D67 WSM35G Manufacturer: Walter Tools Product type: milling insert Series: Tiger·tec Gold Core specifications Tolerance class: G Free angle: 15° Plate form: Parallelogram 85° Plate size: 10 Plate thickness: T3 Special features Chipbreaker: D67 Grade/coating: Tiger·tec Gold, WSM35G (coated carbide) Suitable materials: stainless steels (M), superalloys/titanium (S) Execution: T FAQ What materials is this insert best suited for? The ADGT10T3PER‑D67 WSM35G insert is specified for ISO groups M and S, meaning it is particularly suitable for stainless steels and heat‑resistant superalloys/titanium when used with appropriate cutter bodies and cutting data. How does the chipbreaker D67 help in milling? The chipbreaker D67 on the ADGT10T3PER‑D67 WSM35G shapes chips for controlled evacuation, reducing the risk of clogging and enabling stable cutting forces during medium‑to‑heavy milling operations. Can this insert be used for finishing as well as roughing? Depending on cutter setup and cutting parameters, the WSM35G grade supports both productive material removal and consistent surface quality; geometry choices determine whether the ADGT10T3PER‑D67 WSM35G is applied for semi‑finishing or more aggressive passes. What are the key geometric benefits of the insert form? The parallelogram 85° geometry combined with a 15° clearance angle and T3 thickness improves edge stability and seating rigidity, which contributes to dimensional accuracy and extended edge life under dynamic loads. Is the insert compatible with standard cutter bodies? The ADGT10T3PER‑D67 WSM35G follows ISO‑style designation and tolerance class G, facilitating compatibility with matching cutter bodies designed for this insert shape; correct clamping and seat condition remain essential. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The item offered is original factory‑new goods from the manufacturer.
ADGT10T3PER-D67 WSM35S T Wendeplatten - Walter Tools
Take advantage of the combination of high-temperature stability and precise chip control for more consistent productivity; order the insert directly via Metav Werkzeuge or request advice from our consultants for application-specific data. ADGT10T3PER-D67 WSM35S milling indexable insert — Tiger·tec Silver for difficult-to-machine materials by Walter Tools ADGT10T3PER-D67 WSM35S is a milling indexable insert designed for high thermal loads and secure chip formation, ideally used on stainless steels and heat-resistant superalloys in demanding production environments Tiger·tec Silver coating for heat resistance WSM35S grade for stainless and superalloys Parallelogram 85° form, 15° clearance angle Long tool life through heat-resistant coating and grade The Tiger·tec Silver coating combined with the WSM35S coated-carbide grade provides enhanced thermal resistance and a stable cutting edge when facing high temperatures typical of machining stainless steels and superalloys. The layered coating reduces adhesive wear and supports stable chip formation, which in turn lowers the frequency of tool changes and increases effective machine uptime. For workshops aiming at repeatable machining results, this translates into measurable gains in process reliability and reduced non-productive time. Geometry engineered for predictable chips and surface quality The insert’s parallelogram 85° form together with the D67 chipbreaker and a 15° clearance angle gives a balanced cutting geometry that promotes controlled chip flow and good surface integrity. The T3 thickness adds mechanical stiffness, improving resistance to edge chipping under interrupted cuts or heavy engagement. These geometric features help to reduce recutting of chips and improve tool life stability, which is particularly relevant for milling operations where consistent part finish and dimensional stability are required. Broad application range with production-focused benefits Specified for difficult-to-machine materials, the insert suits operations involving stainless steel and heat-resistant alloys (ISO groups M and S). Its tolerance class G ensures consistent interchangeability and predictable behaviour across tool changes. By combining a modern coating system with a robust grade and targeted chip control, the insert supports higher cutting parameters where appropriate, enabling shorter cycle times and a favourable cost-per-part metric without compromising on repeatability or safety of the cutting edge. For procurement or technical evaluation of this Walter Tools ADGT10T3PER-D67 WSM35S milling indexable insert, contact Metav Werkzeuge for tailored advice and prompt supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADGT10T3PER-D67-WSM35S-WALTER Name: ADGT10T3PER-D67 WSM35S Type: milling indexable insert Manufacturer: Walter Tools Core specifications Series: Tiger-tec Silver Grade: WSM35S Chipbreaker: D67 Plate form: Parallelogram 85° Free angle: 15° Thickness: T3 Plate size: 10 Tolerance class: G Designs and special features Coated carbide (coated hard metal) Intended for stainless steel (M) and superalloys/titanium (S) Optimised for stable chip formation Robust cutting edge for heavy-duty milling Suitable for demanding production environments FAQ What materials is this insert suitable for? The insert is intended for difficult-to-machine materials and explicitly for stainless steel (ISO group M) and heat-resistant superalloys/titanium (ISO group S), thanks to the WSM35S grade and Tiger·tec Silver coating. What advantage does the D67 chipbreaker provide? The D67 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the risk of chip re-cutting during milling operations. Which geometry does the insert use and why does it matter? The parallelogram 85° form with a 15° clearance angle increases engagement flexibility and contributes to predictable cutting forces and effective chip control in a wide range of milling applications. How does the Tiger·tec Silver series affect tool life? The Tiger·tec Silver coating enhances thermal stability and wear resistance of the coated-carbide grade, supporting longer edge life and more consistent performance when machining thermally demanding alloys. Is this insert compatible with standard milling toolholders? The insert’s form and tolerance class G are designed for reliable interchangeability; the ADGT10T3PER-D67 WSM35S insert fits holders that accept its parallelogram 85° geometry and T3 thickness. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands; the offered item is an original, factory-new product of the manufacturer.
ADGT10T3PER-D67 WSP45G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold coating and the versatile WSP45G grade for reliable chip control and extended tool life; order directly via Metav Werkzeuge or consult our experts for application advice. ADGT10T3PER-D67 WSP45G – Parallelogramm milling insert with Tiger‑tec Gold coating by Walter Tools The ADGT10T3PER-D67 WSP45G is a coated carbide milling insert designed for robust milling in steel, stainless steel and heat‑resistant alloys, offering stable cutting with a Parallelogram 85° geometry. Tiger‑tec Gold PVD coating for long tool life Designed for P, M and S material groups Parallelogram 85° shape for versatile engagement 15° clearance and T3 thickness for stable cutting Raise productivity with advanced coating and grade The combination of Tiger‑tec Gold coating and the WSP45G grade provides a clear productivity advantage when milling demanding materials. The PVD coating improves wear resistance and reduces built‑up edge, which leads to longer intervals between indexing and fewer tool changes. Because the grade is formulated for the P/M/S groups, the insert maintains cutting-edge integrity across unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. This translates into a more predictable process, reduced machining downtime and improved overall throughput on production lines. Consistent chip control and process stability The Parallelogram 85° form combined with the D67 chipbreaker is engineered to promote secure chip formation and evacuation. Stable chip control reduces rework and the risk of surface damage, especially in interrupted or trochoidal milling operations. The design also supports lower cutting forces in mixed‑material batches, offering improved tool life and consistent surface finish. Clearances and geometry have been balanced to limit vibration and thermal loading, so the insert performs reliably in both roughing and semi‑finishing cycles. Practical benefits for tool management and set‑ups With a T3 thickness and a 15° clearance angle, the insert provides a dependable balance of rigidity and accessibility for varied tool holders and rotative speeds. The concise geometry simplifies index management and reduces spindle dwell for re‑cuts. For workshop planners, this means predictable tool consumption and easier inventory standardisation: the grade’s broad material capability reduces the need for multiple specialised inserts. Where process security and repeatability matter, this insert supports consistent cycle times and quality outcomes. For tailored application advice or to procure Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical consultation and supply arrangements Technical data SKU: ADGT10T3PER-D67-WSP45G-WALTER Designation: ADGT10T3PER-D67 WSP45G Manufacturer: Walter Tools Core data Insert size: 10 Thickness: T3 Clearance angle: 15° Tolerance class: G Form angle: Parallelogram 85° Special features Coating: Tiger‑tec Gold Grade: WSP45G Chipbreaker: D67 Material groups: P / M / S Series: Tiger‑tec Gold FAQ What materials is this insert suitable for? The ADGT10T3PER-D67 WSP45G is specified for the P, M and S groups, meaning it is suitable for steel, stainless steel and heat‑resistant superalloys/titanium. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold PVD coating on this insert enhances wear resistance and thermal stability, which prolongs cutting edge life and supports consistent machining results. Which chipbreaker should be used for heavy roughing? The D67 chipbreaker supplied with the insert is designed to manage chips effectively in heavier cuts, improving evacuation and reducing the likelihood of edge build‑up. Is the Parallelogram 85° form suitable for slotting and face milling? Yes; the Parallelogram 85° geometry offers flexible engagement and is appropriate for both slotting and face operations where secure seating and edge stability are required. How does the T3 thickness affect tool life and rigidity? A T3 thickness provides a good compromise between rigidity and accessibility, supporting stable cutting forces while allowing efficient indexing and setup in various holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The item offered is an original, factory‑new product from Walter Tools.
ADGT10T3PER-G77 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold coating and the WSM35G grade for secure chip control and extended tool life, ensuring consistent machining of stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or contact their consultants for application support. ADGT10T3PER-G77 WSM35G milling indexable insert – Tiger·tec Gold, 15° free angle (Walter Tools) The ADGT10T3PER-G77 WSM35G is a Tiger·tec Gold‑coated milling insert designed for robust milling of stainless steels and heat‑resistant alloys in demanding industrial applications Tiger·tec Gold coating for high temperature stability WSM35G grade for stainless steel and superalloys Parallelogram 85° shape for robust milling engagement G77 chipbreaker for reliable chip formation Built for stable machining of difficult materials The combination of the Tiger·tec Gold coating and the WSM35G cemented‑carbide grade delivers notable advantages when machining stainless steels and superalloys. The coating increases thermal stability, reducing adhesion and built‑up edge during high‑temperature cutting, while the substrate grade supports a consistent wear behaviour. For production environments where cycle time and tool life directly affect throughput, this insert provides a predictable performance profile that helps to minimise unplanned tool changes and maintain a steady production flow. The design is particularly suitable where controlled chip formation and edge integrity are essential. Geometry and chip control that improve process security The parallelogram 85° cutting geometry and 15° free angle combine to offer a secure cutting engagement and allow for favourable cutting directions in common milling setups. The T3 thickness contributes to insert rigidity under heavier axial loads, reducing the risk of vibration and flank wear. The integrated G77 chipbreaker facilitates short, controlled chips in interrupted and continuous milling, lowering the likelihood of chip packing and improving surface finish. In this way, fewer corrective passes are required and the machining process becomes more efficient — a tangible benefit for high‑mix or high‑volume production. Practical benefits and recommended applications This milling insert is tailored to demanding sectors where stainless steels and heat‑resistant materials challenge tooling performance. Typical applications include roughing and semi‑finishing operations where edge stability and heat resistance are priorities. The insert’s specifications support straightforward tool‑path strategies: conservative feeds and speeds deliver extended life, while optimised cutting parameters take advantage of the coating to increase productivity where thermal loads are higher. For shops seeking to harmonise tool inventories, the insert offers a reliable option for a broad range of corrosion‑resistant and high‑temperature alloys, contributing to consistent part quality and lower overall tooling costs. For process‑critical milling of stainless steels and superalloys, contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts and order the ADGT10T3PER‑G77 WSM35G for reliable, repeatable results Technical Data Article number: ADGT10T3PER-G77-WSM35G-WALTER Name: Fräswendeschneidplatte ADGT10T3PER-G77 WSM35G Manufacturer: Walter Tools Facts Free angle: 15° Plate size: 10 Plate thickness: T3 Tolerance class: G Plate form: Parallelogramm 85° Special features Coating technology: Tiger·tec Gold Grade: WSM35G (coated cemented carbide) Chipbreaker: G77 Applicable material groups: M (stainless steels), S (heat‑resistant alloys and titanium) Series: Tiger‑tec Gold FAQ What materials is this insert suitable for? The ADGT10T3PER‑G77 WSM35G milling insert by Walter Tools is suitable for stainless steels (M) and heat‑resistant alloys/titanium (S) according to the grade characteristics. How does the G77 chipbreaker affect machining? The G77 chipbreaker on this Walter Tools insert produces short, controllable chips, improving chip evacuation and surface quality during milling operations. Which cutting conditions suit the Tiger·tec Gold coating? The Tiger·tec Gold coating on the ADGT10T3PER‑G77 WSM35G is optimised for higher thermal loads, so increased cutting speeds and moderate feeds that generate heat will benefit from enhanced tool life and reduced edge failure. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names mentioned are the property of their respective owners. Protected brand names and trademarks are cited for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the respective trademark owners. The offered article is original, factory‑new merchandise from the manufacturer Walter Tools.
ADGT10T3PER-G77 WSP45G WSP45G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold PVD coating and a robust G77 chipbreaker delivers consistent cutting performance and extended tool life for a wide range of materials. Order the insert directly via Metav Werkzeuge or consult the Metav team for application-specific advice. ADGT10T3PER-G77 WSP45G — Milling indexable insert (Tiger·tec Gold PVD, Parallelogram 85°) – Walter Tools The ADGT10T3PER-G77 WSP45G is a parallelogram milling insert designed for high-productivity machining of steel, stainless steel and heat-resistant alloys in general milling applications. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Parallelogram 85° geometry for positive engagement 15° clearance angle for controlled cutting High productivity through coating and chip control The insert combines a Tiger·tec Gold PVD coating with the WSP45G grade to provide a balance of wear resistance and toughness. This combination improves edge stability under variable cutting conditions and reduces the frequency of insert changes, supporting uninterrupted production cycles. The integrated G77 chipbreaker promotes predictable chip formation, which reduces vibration and helps maintain a consistent surface finish during medium to heavy milling passes. Geometry and mounting that enhance process security The parallelogram 85° insert shape and its 15° clearance are engineered to produce a stable cutting engagement and secure clamping in standard milling heads. This geometry contributes to controlled radial forces and favourable chip flow, which in turn supports reliable tool performance and repeatable results across batches. For workshops seeking to reduce set-up variability, the positive rake and shape support straightforward indexation and quick replacement. Versatility across demanding materials Assigned to material groups P / M / S, the grade is optimised for machining unalloyed and alloyed steel, stainless steel and heat-resistant superalloys including titanium-based materials. The coated carbide substrate delivers heat resistance and edge retention where poor thermal conductivity of the workpiece would otherwise shorten tool life. For applications requiring both robustness and adaptability, this insert offers a practical balance between life expectancy and machining reliability. Contact Metav Werkzeuge for tailored application support on Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ADGT10T3PER-G77-WSP45G-WALTER Label: Fräswendeschneidplatte ADGT10T3PER-G77 WSP45G Walter Tools Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G ISO designation: ADGT10T3PER-G77 WSP45G Key figures Insert size: 10 Thickness: T3 Clearance angle: 15° Tolerance class: G Insert form: Parallelogram 85° Special features Coating: Tiger·tec Gold (PVD) Applicable materials: Steel, stainless steel, superalloys (P / M / S) Chipbreaker: G77 Execution: T (T-type thickness) Coated carbide grade for versatile milling applications FAQ What materials is this insert suitable for? The ADGT10T3PER-G77 WSP45G insert is suitable for machining steel, stainless steel and heat-resistant superalloys, reflecting its P / M / S designation and the wear-resistant Tiger·tec Gold coating. What benefit does the G77 chipbreaker provide? The G77 chipbreaker promotes consistent chip formation and evacuation, which reduces vibration and improves surface finish during medium to heavy milling operations. How does the parallelogram 85° shape affect machining? The parallelogram 85° geometry offers a positive engagement angle and secure clamping, helping to control cutting forces and improve repeatability in series production. Is the insert suitable for roughing and finishing? The combination of a tough coated carbide grade and controlled chip formation makes the insert suitable for higher material removal rates and stable finishes; process parameters determine whether roughing or finishing is optimal. What does the Tiger·tec Gold coating achieve? The Tiger·tec Gold PVD coating enhances heat resistance and wear performance at the cutting edge, extending tool life under the thermal loads common when machining stainless steels and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
ADGT120404R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the versatile WSP45G grade and the proven F56 chipbreaker to ensure stable chip formation and consistent productivity across steel, stainless steel and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. ADGT120404R-F56 WSP45G Fräswendeschneidplatte – Tiger·tec Gold, F56 chipbreaker | Walter Tools The ADGT120404R-F56 WSP45G is a coated carbide milling insert designed for versatile finishing and semi-finishing milling in steels, stainless steels and high-temperature alloys, optimised for stable cutting and reliable chip control Tiger·tec Gold PVD coating Universal P/M/S suitability F56 chipbreaker for reliable chips Parallelogram 85° form for accessibility Improved process reliability when machining steels and stainless steels The combination of Tiger·tec Gold coating and the WSP45G grade provides enhanced wear resistance and a stable cutting edge, which reduces unplanned interruptions in production. The insert is engineered for the thermal and mechanical conditions typical when machining steel and stainless steel, supporting consistent chip formation and predictable tool life. The coated carbide base helps dissipate heat from the cutting zone and maintain dimensional stability, resulting in fewer reworks and improved surface consistency. Controlled chip flow and edge security for difficult alloys When working with heat-resistant superalloys or titanium, the F56 chipbreaker and the PVD-coated substrate work together to limit edge build-up and to manage long, stringy chips. This chip control reduces the risk of surface damage and tool breakouts, while the 0.4 corner radius and 15° free angle contribute to edge strength and cutting stability. The result is a milling solution that balances cutting performance with the reliability required for demanding components. Practical design for flexible milling applications The Parallelogram 85° shape and the ADGT designation ensure accessibility in a range of toolholders and approaches, supporting varied toolpaths and machining strategies. The insert’s construction and grade make it suitable across the ISO groups P, M and S, offering a single, economical solution for mixed-production environments. The clear technical design supports predictable tool-change intervals and straightforward inventory planning, helping to keep machining workflows efficient and consistent. For milling challenges that demand dependable edge life and versatile material coverage, contact Metav Werkzeuge for tailored advice on the Walter Tools ADGT120404R-F56 WSP45G insert or to arrange procurement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADGT120404R-F56-WSP45G-WALTER Product: Fräswendeschneidplatte ADGT120404R-F56 WSP45G Brand: Walter Tools Core specifications Free angle: 15° Corner radius: 0.4 Insert size: 12 Thickness code: 04 Chipbreaker: F56 Tolerance class: G Net price: 21.924 Materials & features Coating series: Tiger·tec Gold Grade: WSP45G Plate form: Parallelogram 85° Material suitability: P / M / S Execution: T ISO designation: ADGT120404R-F56 WSP45G Material class: PVD-coated carbide FAQ Which materials can be machined with this insert? The ADGT120404R-F56 WSP45G insert is suitable for machining across ISO groups P (steel), M (stainless steel) and S (heat-resistant superalloys and titanium), delivering balanced performance for mixed-material production. What advantage does the Tiger·tec Gold grade provide? Tiger·tec Gold in the WSP45G grade offers enhanced wear resistance and edge stability for extended tool life when the ADGT120404R-F56 WSP45G insert is used in demanding milling operations. How does the F56 chipbreaker affect operation? The F56 chipbreaker provides controlled chip segmentation and evacuation, reducing the risk of build-up and improving surface integrity during milling with the ADGT120404R-F56 WSP45G insert. Is this insert suitable for finishing and semi-finishing? Yes, the design and grade of the ADGT120404R-F56 WSP45G make it appropriate for both finishing and semi-finishing applications, delivering consistent surface quality and dimensional stability. Can this insert be used in standard ADGT toolholders? The ADGT120404R-F56 WSP45G follows common ADGT geometries and the parallelogram form is compatible with toolholders designed for this insert family, facilitating straightforward integration into existing tool sets. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADGT120416R-D67 WSP45G Wendeplatten - Walter Tools
The combination of a Tiger‑tec Gold PVD coating and the WSP45G grade delivers extended tool life and consistent chip control in demanding milling operations; the parallelogram 85° geometry with a 1.6 mm corner radius provides stable cutting and predictable surface quality. Order the insert via Metav Werkzeuge or request technical guidance from the Metav team for process optimisation. ADGT120416R-D67 WSP45G – Milling indexable insert, Tiger‑tec Gold, Parallelogram 85° (Walter Tools) The ADGT120416R-D67 WSP45G is a parallelogram milling insert engineered for versatile face and shoulder milling of Stahl, rostfreier Stahl and high‑temperature alloys. Tiger‑tec Gold coating for extended flank life Parallelogram 85° form for positive lead angles 1.6 mm corner radius for stable cutting edge WSP45G grade for Stahl, rostfreier Stahl and S alloys Durable coating technology for longer tool life and process stability The Tiger‑tec Gold coating, combined with the WSP45G carbide grade, is designed to resist wear under the thermal and mechanical stresses typical of milling. The PVD multilayer system reduces flank wear and improves resistance to built‑up edge, which translates into longer intervals between indexings and a more reliable production flow. For operations where repeatability and predictable tool change cycles matter, this insert provides quantifiable gains in uptime and component consistency. Geometry that improves chip formation and reduces cutting forces The parallelogram 85° form and the 15° relief angle promote a positive cutting geometry that supports secure chip evacuation and reduced cutting forces. The 1.6 mm corner radius combines edge strength with the capacity to produce a consistent surface finish on shoulder and ramp milling. The insert’s profile and the D67 chipbreaker work together to shape chips for safer evacuation, lowering the risk of re-cutting and improving tool life under variable cutting conditions. Broad material suitability streamlines tooling choices Marked for P/M/S, the insert covers a wide materials spectrum in line with ISO 513: P for carbon and alloy steels, M for rostfreier Stahl and S for heat‑resistant superalloys and titanium. The WSP45G composition is optimised to manage the specific thermal and tribological demands of these groups, helping to avoid premature edge failure when switching between materials. This versatility reduces the number of special‑purpose grades required in a mixed‑material production environment, simplifying inventory and selection. Practical application benefits and process reliability With a compact plate size and a robust chipbreaker, the insert supports both roughing and finishing passes depending on parameter selection. Stable cutting edges and controlled wear behaviour contribute to consistent dimensional results and improved surface integrity, particularly on interrupted cuts and complex tool paths. The design minimises downtime for index changes and supports efficient machining cycles, making it suitable for batch production as well as flexible jobbing environments. For tailored recommendations on Walter Tools Tiger‑tec Gold inserts and to secure ADGT120416R‑D67 WSP45G for upcoming milling tasks, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical support and ordering assistance Technical data Article number: ADGT120416R-D67-WSP45G-WALTER Designation: ADGT120416R-D67 WSP45G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Core measurements Insert size: 12 mm Thickness code: 04 Corner radius: 1.6 mm Relief angle: 15° Tolerance class: G Special features Grade: WSP45G Series: Tiger‑tec Gold Chipbreaker: D67 Form: Parallelogram 85° Applicable materials: P / M / S Execution: T ISO designation: ADGT120416R-D67 WSP45G FAQ What materials can this insert machine effectively? The ADGT120416R‑D67 WSP45G insert is specified for P / M / S applications, covering Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold PVD coating on the WSP45G grade reduces flank wear and built‑up edge, enhancing tool life and process stability in demanding milling operations. Is the insert suitable for shoulder and face milling? Yes, the parallelogram 85° geometry and the 1.6 mm corner radius make this insert suitable for both shoulder and face milling tasks where controlled cutting forces and chip flow are required. Which chipbreaker does the insert use and what is its benefit? The insert is equipped with the D67 chipbreaker, designed to form and control chips for safer evacuation and consistent surface quality during milling. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com