Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
ADGT120430R-F56 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, versatile P/M/S material capability and precise chip control for consistent, high‑productivity milling. Order the item directly via Metav Werkzeuge or ask the consultants for application advice. ADGT120430R-F56 WSP45G milling indexable insert — Tiger·tec Gold, P/M/S application, Walter Tools The ADGT120430R-F56 WSP45G is a Tiger·tec Gold PVD‑coated milling insert designed for versatile face and profile milling across steel, rostfreier Stahl and heat‑resistant alloys Tiger·tec Gold PVD coating Suitable for steel, rostfreier Stahl and superalloys Parallelogram 85° geometry F56 chipbreaker for stable chips Longer tool life through Tiger·tec Gold coating The Tiger·tec Gold PVD‑coated substrate combines a wear‑resistant surface with a tough cemented carbide core to deliver prolonged service life and consistent cutting behaviour. This coating technology reduces flank wear and supports a stable cutting edge under intermittent and continuous milling loads, which translates directly into fewer tool changes and higher machine uptime. The result is a measurable productivity advantage and improved process reliability for series production. Broad material range and secure chip formation Marked for P/M/S application, the insert is optimised for conventional steels (P), rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S). The designation indicates material‑specific tuning of the grade and coating to manage heat, adhesion and chip flow. The integrated F56 chipbreaker promotes controlled chip segmentation and evacuation, lowering rework risk and improving surface finish on each pass. This makes the insert a solid choice where mixed‑material machining is common. Geometry engineered for stable milling and repeatable results The parallelogram 85° layout, together with a 15° clearance angle and a corner radius 3, offers a balanced mix of strength and accessibility for shoulder and light profiling operations. The plate thickness (04) and the specific geometry ensure dependable edge support, while the parallelogram form helps to maintain a favourable entry angle, reducing vibration in interrupted cuts. Together, these features support repeatable dimensional accuracy and reliable surface quality in demanding production environments. Contact Metav Werkzeuge today to discuss Walter Tools Tiger·tec Gold inserts and secure the ADGT120430R-F56 WSP45G for productive, process‑secure milling operations Technical data Article number: ADGT120430R-F56-WSP45G-WALTER SKU: ADGT120430R-F56-WSP45G-WALTER Designation: ADGT120430R-F56 WSP45G Series: Tiger-tec Gold Grade / Sort: WSP45G Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 3 Plate form: Parallelogramm 85° Plate size: 12 Plate thickness: 04 Chipbreaker: F56 Tolerance class: G Special features Coating: PVD‑coated cemented carbide Material applicability: P / M / S Intended use: versatile milling applications Execution: T FAQ What workpiece materials is this insert suitable for? The ADGT120430R-F56 WSP45G is developed for P/M/S groups: Steel, rostfreier Stahl and heat‑resistant superalloys/titanium, offering versatile performance across these materials. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold provides enhanced wear resistance and thermal stability; the coating on the Walter Tools insert supports longer edge life and consistent surface quality under varying cutting conditions. What milling operations benefit most from this geometry? The parallelogram 85° geometry with a 15° clearance and the F56 chipbreaker is particularly effective for shoulder milling, light profiling and applications requiring stable chip control. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned only for explanation. There is no affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer.
ADGT120440R-F56 WSP45G T Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold durability and the WSP45G grade’s controlled chip formation to maintain consistent productivity in demanding milling operations; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. ADGT120440R-F56 WSP45G milling insert (Tiger·tec Gold) by Walter Tools — PVD-coated carbide, 15° free angle ADGT120440R-F56 WSP45G is a PVD-coated carbide milling insert designed for productive face and shoulder milling across Stahl, rostfreier Stahl and heat-resistant superalloys. Tiger·tec Gold PVD-coated carbide for durability Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 85° form with 15° free angle Corner radius 4 mm for stable cutting edge F56 chipbreaker for controlled chip formation Longer tool life through advanced coating and grade The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a marked improvement in edge stability and wear resistance. This PVD-coated carbide formulation is engineered to withstand the thermal and mechanical loads typical of milling Stahl and rostfreier Stahl, which helps extend the interval between regrinds and tool changes. As a result, setups remain productive for longer and machine uptime is increased, supporting predictable cycle times in production environments. Reliable chip control for safer, faster machining The integrated F56 chipbreaker geometry provides consistent chip segmentation and evacuation, reducing the risk of built-up edge and workpiece damage. Controlled chip formation lowers the likelihood of interruptions and tool damage during shoulder and face milling, which in turn improves surface quality and reduces the need for secondary finishing. The direct benefit is more efficient machining cycles and fewer rejects in daily production. Geometry engineered for secure engagement and dimensional stability The Parallelogram 85° shape combined with a 15° free angle and a corner radius 4 mm produces a robust cutting profile that resists chipping under intermittent cuts and heavy radial engagement. This geometry supports secure clamping in suitable toolholders and maintains repeatable results across runs, which is particularly important when components must meet tight tolerances. The result is dependable component quality and reduced inspection overhead. Versatility across demanding materials and applications Designed for applications in P, M and S material groups, this insert performs in a wide range of situations: conventional Stahl, tough rostfreier Stahl and heat-resistant superalloys or titanium alloys. The grade’s balanced toughness and wear resistance enable secure machining where thermal loads and chemical affinity can otherwise shorten tool life. For production shops processing mixed batches, the insert offers flexibility without sacrificing stability. For machining tasks that demand a durable, versatile insert, choose Walter Tools’ Tiger·tec Gold ADGT120440R-F56 WSP45G and contact Metav Werkzeuge for application matching and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number / SKU: ADGT120440R-F56-WSP45G-WALTER Label: Fräswendeschneidplatte ADGT120440R-F56 WSP45G Walter Tools Series: Tiger-tec Gold Grade: WSP45G Facts Free angle: 15° Corner radius: 4 mm Plate size: 12 Thickness code: 04 Tolerance class: G Special features Form: Parallelogram 85° Chipbreaker: F56 Coating / type: Tiger·tec Gold (PVD-coated carbide) Applicable for: Stahl, rostfreier Stahl, superalloys and titanium Execution: T FAQ What materials can this insert machine reliably? The ADGT120440R-F56 WSP45G grade is specified for machining P, M and S groups — that is Stahl, rostfreier Stahl and heat-resistant superalloys/titanium — making it suitable for a broad range of milling tasks. How does the F56 chipbreaker affect machining performance? The F56 chipbreaker on this Walter Tools insert controls chip size and evacuation, improving surface finish and reducing the risk of built-up edge during continuous or interrupted milling. What advantage does the Parallelogram 85° form provide? The parallelogram geometry with an 85° orientation and a 15° free angle offers a stable cutting edge and secure engagement, which supports repeatable dimensions and longer edge life under varying cutting conditions. Is this insert suitable for heavy engagement and roughing? With a corner radius of 4 mm and the toughness of the WSP45G grade, the insert is designed to tolerate higher radial loads; however, toolholder selection and process parameters should be matched to the application for optimal results. Which series and coating technology does the insert use? The insert belongs to the Tiger·tec Gold series and features a PVD-coated carbide construction, combining wear resistance and edge stability for demanding milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners. The offered article is an original factory-new product of the manufacturer.
ADGT1204PER-D51 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S grade for stable chip formation and extended tool life; the parallelogram 85° geometry with 15° relief ensures secure seating and reliable cutting in steel and cast iron. Order this insert directly via Metav Werkzeuge or consult our specialists for process optimisation. ADGT1204PER-D51 WKP25S — Walter Tools milling insert, Tiger‑tec Silver, for steel and cast iron, 15° relief The ADGT1204PER-D51 WKP25S is a coated carbide milling insert designed for productive machining of steel and cast iron, offering a robust chip control geometry for reliable, repeatable results in serial production. Tiger‑tec Silver coating for extended tool life WKP25S grade optimised for steel and cast iron Parallelogram 85° insert with 15° relief D51 chipbreaker for consistent chip control Consistent performance under continuous cutting conditions The combination of Tiger‑tec Silver coating and the WKP25S grade delivers measurable improvements in wear resistance and process stability. Designed for the thermal and mechanical challenges of machining steel and cast iron, this insert maintains cutting-edge integrity over longer tool life cycles, which reduces downtime and tool changes. The coated carbide substrate supports higher cutting intensities while the surface treatment minimises adhesive and abrasive wear for consistent results. Geometry that secures accuracy and repeatability The parallelogram 85° plate form and 15° relief result in an insert that seats securely in the cutter body and provides a predictable cutting angle for stable engagement. The specific shape lowers cutting forces in lateral milling and helps maintain dimensional accuracy across multiple passes. As a result, users benefit from reduced vibration, improved surface quality and fewer rejected parts in batch production. Reliable chip control for uninterrupted throughput Equipped with the D51 chipbreaker, the insert shapes and breaks chips efficiently when machining both steel and cast iron. Controlled chip formation reduces the risk of chip entanglement and tool damage, facilitating uninterrupted feed rates and safer handling at the machine. The improved chip flow also contributes to consistent surface finish and less manual intervention between cycles. Process-oriented grade and coating for diverse applications The WKP25S grade belongs to a coated carbide family tuned for the ISO groups P and K, which correspond to steel and cast iron. This makes the insert a versatile choice for mixed production shops that require a single, reliable grade across different workpiece materials. The Tiger‑tec Silver technology combines coating adhesion and optimized topography to improve thermal resistance and reduce crater wear during continuous milling. For production-focused milling processes trust Walter Tools’ ADGT1204PER-D51 WKP25S — contact Metav Werkzeuge for application advice or to discuss integration into existing tool setups Technical data Article number: ADGT1204PER-D51-WKP25S-WALTER Name: ADGT1204PER-D51 WKP25S Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Facts Relief angle: 15° Inscribed circle / size code: 12 Thickness code: 04 Tolerance class: G Chipbreaker: D51 Plate form: Parallelogram 85° Execution: T Special features Coating: Tiger‑tec Silver Substrate / material group: coated carbide Suitable for: Steel (P) Suitable for: Cast iron (K) Series description: WKP25S — coated carbide grade optimised for steel and cast iron FAQ What materials can be machined with this insert? The ADGT1204PER-D51 WKP25S is suitable for machining steel (ISO group P) and cast iron (ISO group K) thanks to the WKP25S grade and Tiger‑tec Silver coating. How does the D51 chipbreaker improve productivity? The D51 chipbreaker on the ADGT1204PER-D51 WKP25S produces short, controlled chips that reduce chip interference and support continuous machining at consistent feed rates. Is this insert part of a recognised coating series? Yes, the insert is part of the Tiger‑tec Silver series, which enhances wear resistance and process stability under demanding cutting conditions. Which cutter holders fit the parallelogram 85° shape? Cutter bodies that accept ADGT‑style parallelogram inserts with an 85° form and matching size code 12 are compatible with this insert. What operational benefits does the 15° relief provide? The 15° relief reduces rubbing and cutting forces in side engagement, improving surface finish and lowering the risk of built-up edge during milling of steel and cast iron. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is among the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADGT1204PER-D51 WKP35G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating, WKP35G coated carbide grade and the parallelogram 85° geometry provides high wear resistance, reliable chip control and stable cutting performance; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. ADGT1204PER-D51 WKP35G — milling insert for steel and cast iron (Walter Tools) ADGT1204PER-D51 WKP35G is a precision milling insert designed for productive machining of steel and cast iron, featuring Tiger·tec Gold coating and a D51 chipbreaker for consistent material removal Tiger·tec Gold coated for long tool life Coated carbide grade WKP35G Parallelogram 85° form for secure mounting 15° clearance for stable cutting engagement Maximise throughput with durable Tiger·tec Gold technology The Tiger·tec Gold technology and the WKP35G grade provide a balanced combination of wear resistance and toughness that is engineered for continuous production. This coating system reduces flank and crater wear under typical cutting conditions for both steel and cast iron, extending tool life and lowering tooling cost per component. The result is improved uptime and more predictable tool-change intervals, which supports higher machine utilisation and consistent output quality. Consistent chip control and surface quality for mixed materials The integrated D51 chipbreaker is tuned to produce short, manageable chips when machining ISO group P (steel) and K (cast iron). Controlled chip formation reduces the risk of re-cutting and surface damage, helping to maintain a stable process across varying batch sizes and component geometries. For workshop planners and production engineers this means fewer interruptions for chip clearing and a more reliable path to achieving target surface finishes. Geometry and tolerance for repeatable clamping and accuracy The parallelogram 85° insert form and 15° clearance angle combine to offer secure seating and predictable engagement in common milling cutter bodies. The tolerance class G and the insert thickness designation ensure interchangeability and stable cutting conditions when replacing inserts in indexable milling heads. These geometric attributes translate into consistent tool overhang, reduced vibration and repeatable part accuracy—key factors when moving from prototype to series production. Contact Metav Werkzeuge for tailored application advice on the ADGT1204PER-D51 WKP35G by Walter Tools and to confirm suitability for specific machining tasks — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: ADGT1204PER-D51-WKP35G-WALTER Item designation: Milling insert ADGT1204PER-D51 WKP35G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WKP35G Facts Insert size: 12 Thickness designation: 04 Clearance angle: 15° Insert form angle: Parallelogram 85° Chipbreaker: D51 Tolerance class: G Execution: T Special features Coated carbide (WKP35G) Suitable for steel (P) and cast iron (K) Tiger·tec Gold coating technology Parallelogram insert geometry Designed for stable chip control and wear resistance FAQ What materials is this insert suitable for? The ADGT1204PER-D51 WKP35G is specified for ISO group P (steel) and K (cast iron); the WKP35G grade and Tiger·tec Gold coating are optimised for these materials. How does the D51 chipbreaker affect machining? The D51 chipbreaker promotes short, controllable chips in both steel and cast iron, improving surface finish consistency and reducing interruptions for chip management during production. Is the geometry suitable for heavy-duty milling operations? The parallelogram 85° form combined with a 15° clearance angle provides secure seating and stable engagement, supporting repeatable performance in demanding milling tasks. Can the insert be used for finishing cuts? Yes—its coated carbide grade and chip control capability make the insert suited to applications where surface quality and dimensional repeatability are required. What does the Tiger·tec Gold coating deliver in daily use? Tiger·tec Gold enhances wear resistance and thermal stability, which helps to extend tool life and maintain cutting-edge integrity over longer production runs. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are used for explanation only and remain the property of their respective owners. The offered item is original, brand-new factory stock of the manufacturer.
ADGT1204PER-D51 WKP35S Wendeplatten - Walter Tools
High wear resistance and reliable chip control from the WKP35S grade together secure productive milling of steel and cast iron; benefit from the Tiger·tec Silver technology and D51 chipbreaker for extended tool life. Order the ADGT1204PER-D51 WKP35S directly via Metav Werkzeuge or consult the Metav team for application advice. ADGT1204PER-D51 WKP35S milling indexable insert — Tiger·tec Silver, for steel and cast iron (Walter Tools) The ADGT1204PER-D51 WKP35S is an indexable milling insert engineered for high-productivity roughing and semi-finishing in steel (P) and cast iron (K), offering a robust geometry for demanding milling operations. Tiger·tec Silver coating for extended tool life Designed for steel (P) and cast iron (K) Parallelogram 85° geometry for stable milling 15° relief angle with D51 chipbreaker Consistent productivity through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKP35S carbide grade provides a marked increase in wear resistance and thermal stability during high-load milling. Coated cemented carbide reduces flank and crater wear under typical steel cutting temperatures, which translates into fewer tool changes and higher machine uptime. The grade is specifically tailored for the ISO groups P and K, ensuring controlled performance when machining both unalloyed or alloyed steel and abrasive cast iron, with improved resistance to the heat and abrasion common in such tasks. Geometry and chip control that improve machining reliability The parallelogram 85° plate shape and the D51 chipbreaker deliver stable cutting engagement and consistent chip formation. The insert's geometry reduces radial cutting forces and enhances seat stability in the cutter body, which is particularly advantageous for interrupted cuts and variable depths of cut. The 15° relief angle aids smooth entry and exit of the tool, while the chipbreaker design supports short, controllable chips that lower the risk of recutting and reduce vibration—factors that contribute to improved surface quality and predictable cycle times. Practical benefits for production workflows and tool management Using the ADGT1204PER-D51 series supports leaner tool inventories and predictable process windows. The coated grade and robust chip control help extend tool life, reducing the number of indexings required per job and lowering overall tooling costs. For process engineers, the insert offers reliable repeatability when paired with matching cutter bodies, making it suitable for batch production and mixed-series manufacturing where consistent outcomes are a priority. The insert’s tolerance class G signals precision manufacturing that facilitates secure seating and repeatable performance. Application advice and selection guidance Selection of the ADGT1204PER-D51 WKP35S is recommended where high material removal rates are required in steel and cast iron, and where a balance between tool life and surface integrity is desired. When setting cutting parameters, consider the Tiger·tec Silver coating’s strength at elevated temperatures: moderate to higher cutting speeds with controlled feed per tooth achieve the best compromise between productivity and wear. For cast iron, the chipbreaker performs well with typical brittle chip forms; for steels, monitoring temperature and chip flow will prolong effective tool life. Contact Metav Werkzeuge for tailored cutting data and availability of the Walter Tools ADGT1204PER-D51 WKP35S; Metav Werkzeuge can provide application-specific recommendations and delivery information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADGT1204PER-D51-WKP35S-WALTER Label: Fräswendeschneidplatte ADGT1204PER-D51 WKP35S Walter Tools Manufacturer: Walter Tools Core data Free angle: 15° Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Tolerance class: G Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: D51 Material suitability: steel (P) and cast iron (K) Execution: T ISO designation: ADGT1204PER-D51 WKP35S FAQ What materials is this insert suitable for? The ADGT1204PER-D51 WKP35S is optimised for steel (ISO group P) and cast iron (ISO group K); the Tiger·tec Silver grade offers wear resistance for both material families. How does the D51 chipbreaker influence machining? The D51 chipbreaker promotes short, controlled chips and improves chip evacuation, which reduces vibration and helps maintain consistent surface quality when using the ADGT1204PER-D51 insert. Which features contribute to longer tool life? The Tiger·tec Silver coating combined with the WKP35S grade increases thermal and abrasive wear resistance, extending tool life under higher cutting speeds and demanding conditions. Is the insert suitable for interrupted cuts? Yes; the parallelogram 85° geometry and the insert’s robust chip control provide stability and secure seat engagement for interrupted milling operations. What designation should be used when ordering spare inserts? Order using the ISO designation ADGT1204PER-D51 WKP35S and reference the Walter Tools brand to ensure correct matching to cutter bodies and tooling systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and brand names are the property of their respective owners and are used here for description only. There is no affiliation between Metav Werkzeuge and the named brands. The offered article is original, factory-new goods of the manufacturer (Walter Tools).
ADGT1204PER-D51 WSP45G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold durability, a 15° clearance angle and a parallelogram 85° geometry ensures reliable chip control and extended edge life; benefit from consistent performance across steel, stainless steel and high-temperature alloys. Order the ADGT1204PER-D51 WSP45G directly via Metav Werkzeuge or consult the product specialists for application advice. ADGT1204PER-D51 WSP45G milling insert — Parallelogram 85°, 15° clearance — Walter Tools A robust ADGT1204PER-D51 WSP45G milling indexable insert designed for versatile milling of steel, stainless steel and heat‑resistant alloys, combining Tiger·tec Gold surface technology with a parallelogram cutting geometry. Tiger·tec Gold PVD coating Versatile P/M/S material range Parallelogram 85° geometry 15° clearance angle for stable cutting Stable cutting and predictable chip formation with Tiger·tec Gold The Tiger·tec Gold coating delivers a balance of wear resistance and toughness that supports longer tool life under varying cutting conditions. This PVD-coated grade is engineered for milling operations where intermittent cuts and varying material hardness can otherwise cause edge chipping. The result is stable chip control and fewer unplanned tool changes, which translates into more predictable production cycles and improved process efficiency. Geometry engineered for milling accuracy and tool life The parallelogram 85° shape together with the 15° clearance angle provides a favourable approach to the workpiece that reduces cutting forces on the edge. This geometry improves surface finish and minimises vibration in shoulder and slot milling. The combination of insert form and chipbreaker D51 supports consistent chip evacuation and helps to maintain a secure cutting edge under moderate to demanding feeds. Broad material capability for mixed production runs Specified for materials P / M / S, the grade is suitable for unalloyed and alloyed steel, stainless steel, and heat‑resistant superalloys / titanium. The composition of the cutting grade is optimised to handle the thermal and mechanical stresses associated with these families of materials, enabling flexible scheduling of mixed batches without constant tool changes. This versatility benefits job shops and production lines that require a single insert type across several workpiece groups. Practical advantages for workshop integration With a tolerance class G and an insert thickness coded 04, the component is straightforward to index and replace within existing toolholders that accept the ADGT form factor. The WSP45G sort offers a compromise between edge robustness and regrindability suitable for many milling tasks. Specification-conscious engineers will appreciate the clear material mapping and the predictable behaviour of the grade when setting process parameters and calculating tool life. Contact Metav Werkzeuge for tailored recommendations on machining parameters and holder compatibility — Metav Werkzeuge is available for application consultations and can advise on optimal cutting data for the ADGT1204PER-D51 WSP45G insert Technical data Article number: ADGT1204PER-D51-WSP45G-WALTER Label: Fräswendeschneidplatte ADGT1204PER-D51 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Grade: WSP45G ISO designation: ADGT1204PER-D51 WSP45G Designation without grade: ADGT1204PER-D51 Execution: T Tolerance class: G Facts Free angle: 15° Plate form: Parallelogramm 85° Plate size: 12 Plate thickness: 04 Chipbreaker: D51 Material groups (machinable): P / M / S Special features Tiger·tec Gold PVD-coated carbide grade Designed for steel, stainless steel and superalloys/titanium Robust chip control for intermittent and continuous milling Balanced wear resistance and edge toughness Suitable for mixed production runs and job shop flexibility FAQ What materials is this insert suitable for? The ADGT1204PER-D51 WSP45G insert is specified for material groups P / M / S — suitable for steel, stainless steel and heat‑resistant superalloys/titanium. Which coating technology does the grade use? The WSP45G grade is part of the Tiger·tec Gold series and features a PVD coating designed to combine wear resistance with edge strength for milling. How does the parallelogram 85° geometry affect machining? The parallelogram 85° geometry on the ADGT1204PER-D51 promotes improved cutting stability and surface finish, particularly in shoulder and slot milling applications. Is the insert compatible with standard ADGT toolholders? The insert follows the ADGT1204 form factor and can be used in holders designed for that insert style; consult holder specifications for seat and clamping details. What is the function of the D51 chipbreaker? Chipbreaker D51 supports controlled chip formation and evacuation under typical milling feeds, aiding consistent edge life and reliable process stability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADGT1204PER-D56 WKP25S Wendeplatten - Walter Tools
High-strength coated carbide grade and optimised chip control deliver consistent performance and long tool life; the robust geometry and tight tolerance reduce set-up time for reliable production. Order the insert directly via Metav Werkzeuge or consult Metav’s specialists for application advice. ADGT1204PER-D56 WKP25S indexable milling insert — Walter Tools — Tiger·tec Silver, D56 chipbreaker The ADGT1204PER-D56 WKP25S is a parallelogram indexable milling insert designed for productive machining of steel and cast iron in general milling applications. Tiger·tec Silver coated carbide grade WKP25S Optimised D56 chipbreaker for consistent chips Parallelogram 85° geometry for secure seating Suited for steel (P) and cast iron (K) machining Performance tailored for steel and cast iron machining The insert combines the Tiger·tec Silver coating technology with the WKP25S grade to provide high thermal stability and wear resistance during medium to high cutting speeds. The coated carbide cutting edge is configured to manage the heat generation typical of steel machining while also resisting the abrasive action encountered with cast iron. The integrated D56 chipbreaker secures controlled chip formation, which reduces the risk of built-up edge and supports uninterrupted material removal. These characteristics translate to measurable gains in process stability and fewer unplanned tool changes. Geometry and tolerances that speed up production A parallelogram seating with an 85° angle and a 15° free angle gives the insert a reliable clamping position and favourable cutting forces, enabling consistent cutting performance across batch runs. The plate thickness 04 and size 12 are matched to common cutter bodies for straightforward interchangeability, while tolerance class G ensures repeatable positioning in tool holders. This combination reduces setup time and minimises downtime during insert indexation, helping maintain higher machine uptime and predictable component quality. Durable grade and brand-backed reliability Manufactured to Walter Tools’ standards, the grade WKP25S is a coated carbide solution optimised for long life under industrial conditions. The series delivers good edge stability and wide material coverage, making it suitable for a variety of milling tasks where both productivity and surface quality matter. Used in stable cutting regimes, the insert supports extended intervals between replacements and contributes to lower tooling cost per part. For operations seeking consistent results and proven tool performance, this solution represents a practical choice. Contact Metav Werkzeuge for availability and tailored recommendations — request details for the Walter Tools ADGT1204PER-D56 WKP25S insert via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADGT1204PER-D56-WKP25S-WALTER Designation: ADGT1204PER-D56 WKP25S Manufacturer: Walter Tools Facts Plate size: 12 Thickness: 04 Free angle: 15° Geometry angle: Parallelogram 85° Tolerance class: G Special features Series: Tiger-tec Silver Grade: WKP25S (coated carbide) Chipbreaker: D56 Material suitability: Steel (P), Cast iron (K) Execution: T FAQ What materials is this insert suitable for? The ADGT1204PER-D56 WKP25S insert from Walter Tools is specified for steel (P) and cast iron (K) applications, with the WKP25S grade optimised for those material groups. How does the D56 chipbreaker improve machining? The D56 chipbreaker on this indexable plate promotes controlled chip fragmentation and evacuation, helping maintain consistent cutting forces and surface finish when machining steels and cast irons. Can the insert be used in standard parallelogram cutter bodies? Yes, the parallelogram 85° form and tolerance class G of the insert are intended for secure seating in commonly used cutter bodies that accept this geometry. What advantage does the Tiger·tec Silver series provide? The Tiger·tec Silver technology used in the WKP25S grade offers enhanced thermal wear resistance and stable edge retention, supporting longer tool life and steady performance in production environments. Is the ADGT1204PER-D56 WKP25S suitable for high-speed cutting? The coated carbide grade and chip control features of this Walter Tools insert accommodate medium to higher cutting speeds typical for efficient steel and cast iron milling, balancing productivity and tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original factory-new product of the manufacturer.
ADGT1204PER-D56 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the WKP35S carbide grade and a stable parallelogram geometry to achieve consistent material removal in steel and cast iron; order the insert directly via Metav Werkzeuge or consult their specialists for application-specific advice. ADGT1204PER-D56 WKP35S indexable milling insert by Walter Tools — Tiger·tec Silver coated, for steel and cast iron, parallelogram 85° geometry ADGT1204PER-D56 WKP35S is a precision indexable milling insert designed for productive machining of steel and cast iron in industrial milling applications Tiger·tec Silver coating for wear resistance WKP35S grade for reliable edge life Parallelogram 85° geometry for stable cutting 15° clearance angle for controlled engagement Durable coating and grade for higher tool life The combination of the Tiger·tec Silver coating and the WKP35S coated carbide grade provides a balance of wear resistance and thermal stability that supports longer service intervals. This coating technology is engineered for abrasive and adhesive wear modes commonly encountered when machining steel and cast iron, so the user benefits from fewer interruptions for tool changes and more predictable performance. The result is improved process economy through reduced tooling costs per component and steadier surface finish quality. Geometry and chip control that stabilise machining A parallelogram 85° insert form, paired with the D56 chipbreaker, helps maintain secure insert seating and effective chip formation during side milling operations. The 15° clearance angle reduces contact on the flank face and contributes to consistent cutting forces, which supports vibration damping and repeatable dimensional results on workpieces. Clear chip control and stable cutting geometry minimise rework and support higher material-removal rates without sacrificing component integrity. Application focus and production benefits Designed for the machining of materials in ISO groups P (steel) and K (cast iron), this insert is suited to mixed-production environments where tool versatility is valued. Its tolerance class G and standardised plate thickness ensure compatibility with common milling cutters and toolholders, easing programme planning and set-up. By choosing a grade and geometry tailored to these material groups, manufacturers achieve reliable surface finish and cycle-time consistency, helping to meet delivery schedules and quality targets. For tailored machining recommendations and prompt supply of the ADGT1204PER-D56 WKP35S indexable milling insert, contact Metav Werkzeuge quoting the SKU ADGT1204PER-D56-WKP35S-WALTER Technical data Article number: ADGT1204PER-D56-WKP35S-WALTER Product type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Core specifications Insert size: 12 Thickness: 04 Clearance angle: 15° Geometry: Parallelogram 85° Chipbreaker: D56 Tolerance class: G Special features Coated carbide (Tiger·tec Silver) Suitable for Steel (P) and Cast iron (K) Execution: T Designation without grade: ADGT1204PER-D56 FAQ What materials is this insert intended for? The ADGT1204PER-D56 WKP35S indexable milling insert by Walter Tools is intended primarily for steel (ISO P) and cast iron (ISO K) applications, reflecting the grade and coating design. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive and adhesive wear, allowing the insert to maintain cutting performance longer under the thermal and mechanical loads typical of steel and cast iron machining. Which geometry suits heavy side milling with this insert? The parallelogram 85° form combined with the D56 chipbreaker promotes stable seating and controlled chip formation, making the insert suitable for reliable side milling operations. Is this insert compatible with standard cutter bodies? Yes — the insert follows standard dimensions and tolerance class G, so it is compatible with common milling cutter bodies designed for this insert shape and size, using the designation ADGT1204PER-D56. Can this grade handle interrupted cuts in cast iron? The WKP35S grade, designed for cast iron as well as steel, provides robust cutting-edge behaviour that supports typical interrupted cutting scenarios found in cast iron machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT1204PER-D56 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating, the versatile WSP45G grade and the D56 chipbreaker for consistent, reproducible milling results. Order the ADGT1204PER-D56 WSP45G milling insert directly via Metav Werkzeuge or consult the Metav team for tailored application advice. ADGT1204PER-D56 WSP45G milling insert — Tiger·tec Gold, Parallelogram 85° | Walter Tools A ADGT1204PER-D56 WSP45G milling insert designed for versatile face and peripheral milling of steel, stainless steels and heat‑resistant superalloys. Tiger·tec Gold PVD-coated grade WSP45G Designed for steel, stainless and superalloys Parallelogram 85° form with 15° free angle Chipbreaker D56 for stable chip control Boosted productivity across mixed-material production The ADGT1204PER-D56 WSP45G insert combines the Tiger·tec Gold coating with a tough, PVD-coated carbide grade to deliver extended tool life and stable cutting behaviour across the ISO groups P / M / S. The grade WSP45G is formulated for the thermal and mechanical loads encountered when machining unalloyed and alloyed steels, stainless steels and heat‑resistant superalloys or titanium. This versatility reduces tool change frequency and simplifies stockkeeping, creating measurable improvements in process efficiency and uptime. Reliable chip control and consistent surface finish The chipbreaker D56 is engineered to produce predictable chip forms and minimise re-cutting, which helps to protect the cutting edge and the workpiece surface. Combined with the 15° free angle and the parallelogram 85° form, the insert achieves an entering angle that balances cutting forces and surface integrity. The result is a consistent finish and repeatable dimensional results, supported by the tolerance class G that ensures interchangeability and predictable clamping in multi-insert milling heads. Practical integration for production environments With a nominal plate designation of 12 and a thickness code of 04, the insert fits common indexable milling systems and facilitates straightforward index changes. The PVD-coated construction of the WSP45G grade enhances thermal resistance and wear protection during interrupted cuts or elevated cutting speeds. Specification clarity—shape, chipbreaker and free angle—allows planners to select compatible cutters with confidence, reducing setup time and supporting continuous, process-stable machining in mixed-material production lines. Discuss machining strategies for the Tiger·tec Gold ADGT1204PER-D56 WSP45G insert with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for application-specific recommendations Technical data Article number: ADGT1204PER-D56-WSP45G-WALTER Designation: ADGT1204PER-D56 WSP45G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Material groups: P / M / S Form: Parallelogram 85° Chipbreaker: D56 Facts Free angle: 15° Plate size: 12 Thickness code: 04 Plate form angle: 85° Tolerance class: G Special features PVD-coated carbide grade Suitable for steel, stainless steels and superalloys/titanium Designed for versatile milling applications Stable chip control with D56 chipbreaker Good edge stability and reproducible performance FAQ What materials is this insert suitable for? The ADGT1204PER-D56 WSP45G insert is specified for ISO groups P, M and S — suitable for machining steels, stainless steels and heat‑resistant superalloys/titanium. What is the benefit of the D56 chipbreaker? The chipbreaker D56 on the ADGT1204PER-D56 WSP45G promotes controlled chip formation and reduces the tendency to re‑cut, improving surface quality and protecting the cutting edge. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating increases thermal stability and wear resistance for the WSP45G grade, extending tool life and enabling more consistent cutting where temperatures and loads are high. Which geometries ensure stable cutting forces? The parallelogram 85° form together with the 15° free angle provides an entering angle that balances cutting forces and contributes to a reliable surface finish and reduced tool load. Is the insert compatible with standard milling heads? The designation (plate size 12, thickness 04 and tolerance class G) of the ADGT1204PER-D56 WSP45G matches common indexable milling systems, allowing straightforward replacement and repeatable positioning. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanation only and does not imply any affiliation between Metav Werkzeuge and the referenced manufacturers. The offered article is an original, factory‑new product of the stated manufacturer.
ADGT1204PER-D67 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the high thermal stability and secure chip control of the Tiger·tec Gold WSM35G grade together with the stable parallelogram geometry for efficient milling of stainless steels and heat‑resistant alloys; order through Metav Werkzeuge or consult its technical team for cutting data and application support. ADGT1204PER-D67 WSM35G milling insert — Tiger·tec Gold, Walter Tools The ADGT1204PER-D67 WSM35G is a parallelogram milling insert designed for machining stainless steels and hard‑to‑cut superalloys in demanding production environments Tiger·tec Gold coated grade WSM35G Designed for stainless steels and superalloys Parallelogram form 85° with 15° clearance D67 chipbreaker for controlled chips Optimised for high‑alloy and stainless machining The combination of the Tiger·tec Gold coating and the WSM35G grade provides a balance of thermal resistance and abrasion control that is particularly effective on stainless steel and superalloys. Because these materials tend to work‑harden and generate elevated temperatures, the coated substrate maintains a stable cutting edge for longer tool life, reducing unscheduled tool changes and improving process consistency. The result is a measurable improvement in surface quality and repeatability during medium to heavy milling operations. Geometry that stabilises cutting and chip flow The parallelogram form with an 85° lead angle, paired with a 15° clearance, promotes gentle entry and stable engagement in the cut; vibrations are minimised and tool pressure is distributed more evenly. The D67 chipbreaker is engineered to produce short, controllable chips in interrupted or continuous cuts, which lowers the risk of chip packing and contributes to steady machining cycles. These geometric choices support higher machining reliability and predictable tool behaviour under varying depths of cut. Coating and substrate engineered for productivity A coated carbide substrate under the Tiger·tec Gold treatment provides enhanced heat shielding and wear resistance without sacrificing toughness. This technological combination supports higher cutting parameters where appropriate and reduces flank wear progression. For workshops targeting throughput improvements, the insert’s material pairing enables longer intervals between inspections and regrinds, translating into increased overall productivity and lower per‑component tooling cost in long runs. Typical applications and handling recommendations The insert is suited to shoulder milling, face milling and light slotting of stainless steels and heat‑resistant alloys where a robust edge and predictable chip form are required. The grade handles thermal loads and edge stress well, making it appropriate for moderate to heavy material removal rates and for use where part integrity under heat is critical. For best results, use a rigid toolholder, apply coolant strategies appropriate to the workpiece, and monitor edge condition; tailoring speeds and feeds to the workpiece and machine setup will preserve the cutting edge and maintain component quality. Contact Metav Werkzeuge for tailored cutting data, application advice and availability for Walter Tools ADGT1204PER-D67 WSM35G inserts Technical Data SKU: ADGT1204PER-D67-WSM35G-WALTER Designation: ADGT1204PER-D67 WSM35G Product type: Fräswendeschneidplatte (milling insert) Manufacturer: Walter Tools Core dimensions & tolerances Insert size: 12 Thickness: 04 Clearance angle: 15° Insert form: Parallelogram 85° Tolerance class: G Chipformer: D67 Materials, coating & applications Grade / series: Tiger·tec Gold / WSM35G Substrate: coated carbide Suitable for: stainless steels (M), superalloys and titanium (S) Execution: T FAQ What materials is this insert intended to machine? The ADGT1204PER-D67 WSM35G milling insert from Walter Tools is designed primarily for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering stable edge life under high temperatures and tough cutting conditions. How does the Tiger·tec Gold treatment benefit machining? The Tiger·tec Gold layer improves thermal resistance and wear protection on the coated carbide substrate, which slows flank and crater wear and helps maintain a stable cutting edge during continuous and demanding milling operations. Which geometric features aid chip control and stability? The parallelogram form with an 85° lead, the 15° clearance, and the D67 chipbreaker combine to reduce vibration, ensure controlled chip formation and support predictable cutting forces across a range of depths of cut. Is the insert suitable for heavy material removal and interrupted cuts? Yes, the grade and geometry are intended to withstand higher loads and interruptions; the combination of a robust substrate and the D67 chipformer makes it appropriate for moderate to heavy milling applications where reliability is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes; there is no connection between our company and the named brands. The offered item is original and factory‑new from the manufacturer.
ADGT1204PER-D67 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from a milling insert that combines Tiger·tec Gold durability with reliable chip control and broad material capability; the result is reduced tool changes, consistent surface quality and a lower cost per component. Order directly via Metav Werkzeuge or consult our specialists for machining-specific recommendations. ADGT1204PER-D67 WSP45G milling indexable insert – Parallelogram 85°, 15° clearance the ADGT1204PER-D67 WSP45G milling insert is a PVD-coated carbide indexable insert designed for productive milling of steels, rostfreier Stahl and heat-resistant alloys in industrial machining Tiger·tec Gold coating for extended tool life Compatible with Stahl, rostfreier Stahl and superalloys Parallelogram 85° form with 15° clearance angle D67 chipbreaker for consistent chip control Insert size 12, thickness 04 Robust coating and economical performance for high-volume milling The Tiger·tec Gold coating combined with the WSP45G grade provides a balance of wear resistance and edge stability that lowers the frequency of insert changes. As a PVD-coated carbide grade engineered for milling, the compound resists abrasive and adhesive wear while maintaining a sharp cutting edge, which translates into a reduced cost per part in series production. The insert’s tolerance class G ensures predictable seating and repeatable results in multi-edge toolholders, supporting consistent cycle times and quality across production batches. Predictable chip formation and improved surface quality The D67 chipbreaker is engineered for reliable chip control when machining a wide range of materials, reducing the risk of entangling chips and minimising interruptions. Stable chip evacuation improves the machined surface and lowers rework rates, particularly when finishing or semi-finishing. The Parallelogram 85° geometry together with the 15° clearance angle offers a controlled entry angle that helps distribute cutting forces, improving tool life and promoting a consistent surface finish on workpieces made of Stahl, rostfreier Stahl and other challenging alloys. Versatile application range and handling recommendations Designed for general-purpose milling, this insert is suitable for operations where a combination of edge robustness and versatile performance is required. The grade supports machining of unalloyed and alloyed steels, rostfreier Stahl and heat-resistant superalloys, thanks to its thermal stability and optimised chip formation. The insert size 12 and thickness 04 make it compatible with common toolholders for shoulder and face milling tasks. For tailored feeds and speeds, testing under specific machine and clamping conditions is recommended; Metav Werkzeuge can provide machining guidance and cutting data to refine process parameters for maximum productivity. For reliable, high-productivity milling with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for application-specific advice and procurement assistance. Technical data Article number: ADGT1204PER-D67-WSP45G-WALTER Part designation: ADGT1204PER-D67 WSP45G SKU: ADGT1204PER-D67-WSP45G-WALTER Manufacturer: Walter Tools Core data Series: Tiger·tec Gold Grade/sort: WSP45G Applicable material groups: P / M / S Plate form: Parallelogramm 85° Free clearance angle: 15° Chipbreaker: D67 Special features Coating: Tiger·tec Gold (PVD-coated) Execution: T Plate size: 12 Plate thickness: 04 Tolerance class: G FAQ What materials can this insert machine effectively? The ADGT1204PER-D67 WSP45G insert is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys, reflecting the P / M / S designation of the Walter Tools Tiger·tec Gold range. How does the D67 chipbreaker affect chip control? The D67 chipbreaker on this milling insert promotes consistent chip formation and evacuation, which reduces interruptions and improves surface finish during continuous milling operations. Is this insert intended for finishing or roughing? The geometry and grade of this insert support finishing to medium machining tasks; the robust Tiger·tec Gold coating provides the durability required for higher productivity in mixed operation profiles. What does tolerance class G mean for clamping and repeatability? Tolerance class G indicates a manufacturing precision that supports secure seating in indexable toolholders, helping to achieve repeatable positioning and consistent results in series production. Can Metav Werkzeuge provide cutting data for this insert? Yes, Metav Werkzeuge can supply application-specific cutting recommendations to match machine, clamping and workpiece conditions for the ADGT1204PER-D67 WSP45G insert. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a brand of the Walter AG group and is recognised for precision cutting solutions within the Sandvik group. Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the manufacturers named. The offered item is an original, factory-new product of the respective manufacturer.
ADGT1204PER-D67-WKP35S Wendeplatten - Walter Tools
ADGT1204PER-D67 WKP35S Fräswendeschneidplatte von Walter Tools ADGT1204PER-D67 WKP35S ist eine beschichtete Wendeschneidplatte aus der Serie Tiger·tec Silver, entwickelt für produktive Fräsprozesse an Stahl und Gusseisen Hohe Standzeit dank Tiger·tec Silver Beschichtung Für Stahl und Gusseisen nach ISO 513 ausgelegt Parallelogramm 85° Form für bessere Zugänglichkeit 15° Freiwinkel reduziert Schneidkräfte und Hitze Passend für Standardfräser mit 12 mm Plattenmaß Prozesssicherheit und Wirtschaftlichkeit gezielt verbessern Die beschichtete Sorte WKP35S kombiniert verschleißfestes Hartmetall mit der Tiger·tec Silver Beschichtung und sorgt so für konstante Werkzeugstandzeit bei der Zerspanung von Stahl und Gusseisen. Die bewusste Optimierung der Spanform durch den Spanbrecher D67 reduziert Schnittunterbrechungen und verringert Nachbearbeitungsaufwand, was direkt zur Senkung der Fertigungskosten beiträgt. Anwender profitieren von höherer Ausbringung ohne komplizierte Prozessanpassungen. Geometrie für Zugänglichkeit und Stabilität nutzen Die Parallelogramm 85° Form und der Freiwinkel von 15° ermöglichen schlanke Schnitte bei guter Zugänglichkeit an komplexen Konturen. Die Plattengröße 12 und die Plattendicke 04 unterstützen eine stabile Spannlage im Fräser und minimieren Vibrationen, was die Oberflächengüte verbessert. Durch die Kombination aus Geometrie und Beschichtung wird saubere Spanabfuhr bei wechselnden Schnittbedingungen erleichtert. Zielgruppe und typische Einsatzfelder Entwickelt für Produktionsbetriebe und Lohnfertiger, die Stahl und Gusseisen nach ISO 513 bearbeiten, eignet sich die Wendeplatte besonders für Schrupp- und Schlichtanwendungen mit mittleren bis hohen Schnittwerten. Die Ausführung T und die Toleranzklasse G gewährleisten reproduzierbare Einspannwerte, was die Programmieraufwände für Serienläufe reduziert. Die Platte ist damit eine wirtschaftliche Wahl für Serienfertigung und Einzelteilproduktion. Einfache Integration und Anwendungshinweise Die ADGT1204PER-D67 WKP35S lässt sich problemlos in gängige Frässysteme einbauen. Zur Prozessoptimierung empfiehlt sich die Abstimmung von Schnittdaten auf Werkstoff und Zerspanungsaufgabe; bei Bedarf steht technische Beratung zur Unterstützung der Parameterauswahl bereit. Bei Fragen hilft der Kundenservice gern weiter und liefert weiterführende Empfehlungen zur richtigen Schneidstoffwahl und zum Einsatz des Spanbrechers. Empfehlung: Die WKP35S Tiger·tec Silver Wendeschneidplatte direkt über Metav Werkzeuge anfragen und die Prozessvorteile für Stahl- und Gusseisenbearbeitung nutzen — eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: ADGT1204PER-D67-WKP35S-WALTER Marke: Walter Tools Serie: Tiger·tec Silver Produktart: Fräswendeschneidplatte Bezeichnung: ADGT1204PER-D67 WKP35S Ausführung: T Daten Freiwinkel: 15° Plattenform: Parallelogramm 85° Plattengröße: 12 Plattendicke: 04 Toleranzklasse: G Spanbrecher: D67 Besonderheiten Beschichtetes Hartmetall Sorte: WKP35S Sorteneinsatz: Stahl (P) und Gusseisen (K) P: Stahl, unlegierte und legierte Stähle K: Gusseisen, abrassiver Verschleiß und brechende Späne FAQ Ist die Platte für Schlicht- und Schruppbearbeitung geeignet? Die ADGT1204PER-D67 WKP35S von Walter Tools ist für Schrupp- und Schlichtanwendungen an Stahl und Gusseisen ausgelegt; die Tiger·tec Silver Beschichtung bietet hierbei eine gute Kombination aus Standzeit und Oberflächengüte. Welche Werkstoffe lassen sich mit dieser Wendeschneidplatte bearbeiten? Primär sind Stahl und Gusseisen nach ISO 513 vorgesehen; die Sortenbezeichnung WKP35S signalisiert die Auslegung auf typische Wärmeentwicklung und Spanbildung dieser Werkstoffgruppen. Wie unterstützt der Spanbrecher D67 die Bearbeitung? Der Spanbrecher D67 formt kurze, kontrollierbare Späne bei Gusswerkstoffen und stabilisiert die Spanabfuhr bei Stahl, wodurch Prozessunterbrechungen reduziert werden. Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT1204PER-F56 WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of thermal resistance, stable cutting-edge performance and controlled chip formation to maintain productive machining of stainless steel and heat‑resistant superalloys; order the ADGT1204PER‑F56 WSM35G insert directly via Metav Werkzeuge or consult the team for application-specific advice. ADGT1204PER‑F56 WSM35G Tiger·tec Gold indexable milling insert, Parallelogram 85°, 15° clearance – Walter Tools The ADGT1204PER‑F56 WSM35G is an indexable milling insert engineered for heavy‑duty milling of stainless steel and heat‑resistant superalloys, offering a coated carbide grade optimised for secure chip control and long tool life. Tiger·tec Gold coating for high heat resistance Optimised for stainless steel and superalloys Parallelogram 85° form for positive cutting geometry 15° clearance angle for reliable chip flow F56 chipbreaker for stable chip formation Durable grade and coating for demanding materials The WSM35G grade from the Tiger·tec Gold series combines a hard, wear‑resistant substrate with a multi‑layer coating designed to withstand high temperatures and abrasive conditions. This technical combination supports a stable cutting edge when machining ISO group M and S materials (stainless steel; heat‑resistant superalloys and titanium), reducing the tendency for built‑up edge and premature flank wear. For production environments that prioritise consistent component quality, the coated carbide reduces unplanned tool changes and contributes to a lower cost per part while maintaining surface integrity. Geometry and chip control that improve process stability The Parallelogram 85° form plus a 15° clearance provides a positive engagement that favours smoother cutting forces and predictable chip formation. The integrated F56 chipbreaker is optimised to generate short, controllable chips even under the heavy cutting conditions typical for these materials, which supports safe evacuation and reduces the risk of rework. The plate thickness (04) and size 12 yield mechanical robustness and compatibility with common milling cutter bodies; the resulting combination enhances surface finish and reduces vibration in both roughing and semi‑finishing operations. Designed for reproducible productivity and easy integration Specified with tolerance class G, this insert meets stringent dimensional standards for repeatable positioning and reliable tool life across toolholders. Its application focus on stainless steel and high‑temperature alloys makes it a pragmatic choice for manufacturers seeking a single insert grade for a range of demanding jobs. The insert supports higher cutting speeds and steady metal removal rates where heat resistance and edge stability are decisive — a rational investment that pays off through fewer stops, less scrap and improved throughput. Contact Metav Werkzeuge today to discuss Walter Tools Tiger·tec Gold inserts and secure tailored recommendations for machining stainless steel and superalloys with the ADGT1204PER‑F56 WSM35G. Technical data Article number: ADGT1204PER‑F56‑WSM35G‑WALTER Product type: Fräswendeschneidplatte (indexable milling insert) Brand: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Facts Clearance angle: 15° Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Chipbreaker: F56 Tolerance class: G Special features Coating: Tiger·tec Gold Material compatibility: S / M (superalloys/titanium and stainless steel) Designed for heavy‑duty and difficult‑to‑machine materials Positive cutting geometry for stable cutting edge FAQ What materials is this insert intended for? The ADGT1204PER‑F56 WSM35G is designed primarily for stainless steel and heat‑resistant superalloys (ISO groups M and S), offering wear resistance and edge stability for these challenging materials. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WSM35G grade increases thermal stability and wear resistance, enabling higher cutting speeds and longer tool life when machining stainless steel and superalloys. Which cutter geometries suit this insert best? The Parallelogram 85° form and 15° clearance make the ADGT1204PER‑F56‑WSM35G particularly suitable for face and profile milling applications where positive cutting angles and controlled chip flow are required. Can this insert be used for finishing operations? Yes; depending on cutting parameters and toolholder rigidity, the ADGT1204PER‑F56 WSM35G can achieve good surface quality in semi‑finishing and finishing passes, thanks to its stable cutting edge and the F56 chipbreaker. What does tolerance class G mean for production? Tolerance class G indicates tight dimensional consistency for the ADGT1204PER‑F56 WSM35G, supporting reproducible insert seating and predictable tool behaviour across multiple tool changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for clarification only and do not indicate any affiliation. The offered article is original, brand‑new merchandise from the respective manufacturer (Walter Tools).
ADGT1204PER-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the versatile WSP45G grade and reliable F56 chip control to maintain productive milling cycles with consistent tool life; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. ADGT1204PER-F56 WSP45G — Walter Tools milling insert with Tiger·tec Gold coating, 15° relief for steel, stainless steel and superalloys The ADGT1204PER-F56 WSP45G is a parallelogram 85° milling insert designed for versatile face and shoulder milling applications in demanding materials Tiger·tec Gold PVD-coated carbide grade WSP45G Parallelogram 85° shape with 15° relief Suitable for steel, stainless steel and superalloys Stable chip control with F56 chipbreaker Increase milling productivity with wear‑resistant Tiger·tec Gold The combination of the Tiger·tec Gold coating and the WSP45G grade provides a wear‑resistant cutting edge that extends tool life and reduces downtime. Designed as a PVD-coated carbide, this insert offers improved adhesion of the coating to the substrate, which helps maintain a stable cutting edge under high thermal loads. As a result, machining cycles become more predictable and productive: fewer indexings and longer intervals between tool changes translate into measurable process efficiency. Reliable performance across challenging material groups This insert is developed for the ISO material groups P, M and S, meaning reliable machining of steel, stainless steel and heat‑resistant superalloys or titanium. The grade's toughness supports secure chip formation when cutting workpieces that generate high temperatures or tend to form long, stringy chips. For production environments that handle mixed batches, the insert’s versatility reduces the need for multiple specialised grades and simplifies tool management while maintaining consistent surface quality and dimensional control. Geometry and chip control for consistent surface finish The parallelogram 85° shape combined with a 15° relief angle produces a favourable cutting geometry for shoulder and ramp milling, improving accessibility and cutting stability. The integrated F56 chipbreaker is tuned for reliable chip segmentation and evacuation, which reduces the risk of re-cutting and surface damage. With an insert size of 12 and thickness 04, the geometry offers a balance between rigidity and accessibility, supporting a steady cutting process and longer tool life in everyday milling tasks with moderate to heavy engagement. Contact Metav Werkzeuge for tailored cutting data and machining recommendations on Walter Tools Tiger·tec Gold inserts to ensure optimal process setup and maximise throughput Technical Data Article number: ADGT1204PER-F56-WSP45G-WALTER Label: Fräswendeschneidplatte ADGT1204PER-F56 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Facts Relief angle: 15° Shape angle: Parallelogram 85° Insert size: 12 Thickness: 04 Tolerance class: G Special features Grade: WSP45G (PVD-coated carbide) Chipbreaker: F56 Applicable material groups: P (steel), M (stainless steel), S (superalloys & titanium) Execution: T Designed for face and shoulder milling FAQ Is this insert suitable for stainless steel milling? Yes. The ADGT1204PER-F56 WSP45G grade is formulated for ISO group M and supports secure chip formation and stable edges when machining stainless steel. What does the F56 chipbreaker achieve? The F56 chipbreaker on the ADGT1204PER-F56 WSP45G promotes consistent chip segmentation and evacuation, reducing re-cutting and improving surface finish during milling. Why is Tiger·tec Gold beneficial for production runs? Tiger·tec Gold coating enhances wear resistance and thermal stability of the cutting edge, helping to extend tool life and keep production cycles predictable when using the ADGT1204PER-F56 WSP45G insert. Which workpiece materials are covered by P, M and S designations? P denotes steel, M denotes stainless steel and S denotes heat‑resistant superalloys and titanium; the ADGT1204PER-F56 WSP45G is suitable across all three groups for versatile milling tasks. How does the parallelogram 85° geometry affect milling performance? The parallelogram 85° shape improves cutter engagement for shoulder and ramp milling, offering good accessibility and stable cutting forces that contribute to consistent surface quality with the ADGT1204PER-F56 WSP45G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for clarification. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer, Walter Tools.
ADGT1204PER-G77 WSM35G WSM35G Wendeplatten - Walter Tools
The combination of a wear-resistant grade, a stabilising chipbreaker and positive geometry delivers consistent performance in difficult-to-machine alloys; reliable surface finish and extended tool life reduce downtime. Order the insert directly via Metav Werkzeuge or consult the technical team for application support. ADGT1204PER-G77 WSM35G – Indexable milling insert for rostfreier Stahl and superalloys (Parallelogram 85°, 15° relief) by Walter Tools ADGT1204PER-G77 WSM35G is a coated indexable milling insert designed for heavy-duty roughing and semi-finishing of rostfreier Stahl and heat-resistant superalloys in demanding production environments Tiger·tec Gold coating technology Optimised for rostfreier Stahl and superalloys Parallelogram 85° cutting geometry 15° relief and G77 chipbreaker High-performance grade for demanding materials The WSM35G grade, part of the Tiger·tec Gold family, is a coated carbide composition engineered for machining tough alloys. Its formulation emphasises thermal stability and a stable cutting edge, which lowers the risk of build-up on the flank and supports predictable flank wear progression. For process planners this means fewer unexpected regrinds and more constant part quality, while production engineers benefit from reduced tool change frequency and improved overall equipment effectiveness. Geometry that stabilises cutting and improves surface quality The insert’s parallelogram 85° shape combined with a 15° relief provides a positive cutting attitude that reduces cutting forces and supports consistent chip formation. The integrated chipbreaker G77 is tailored to the grade and geometry to control long, stringy chips typical of high-temperature alloys. The net effect is enhanced process security and improved surface finish on each pass, making the tooling choice particularly suitable for interrupted cuts and trochoidal strategies where stable chip evacuation is essential. Suitable applications and practical handling Marked for material groups S / M, the insert is intended for performance in both rostfreier Stahl and nickel-/cobalt-based superalloys under ISO 513 classifications. The combination of coated carbide and dedicated chip control is aimed at workshops and subcontractors that require consistently repeatable results across batches. For specification checks or to verify suitability with a particular spindle speed or feed strategy, Metav Werkzeuge’s technical advisers can provide data sheets and cutting parameter recommendations to support safe integration into existing tool holders. Contact Metav Werkzeuge for tailored advice on Walter Tools ADGT1204PER-G77 WSM35G, application recommendations and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADGT1204PER-G77-WSM35G-WALTER Product designation: ADGT1204PER-G77 WSM35G Brand: Walter Tools Series: Tiger-tec Gold Grade: WSM35G Execution: T Shape: Parallelogramm 85° Facts Relief angle: 15° Size: 12 Thickness: 04 Tolerance class: G Design & special features Coating technology: Tiger·tec Gold Carbide type: coated carbide Chipbreaker: G77 Material groups: S / M Typical application: rostfreier Stahl and heat-resistant superalloys FAQ What materials is the insert suitable for? The ADGT1204PER-G77 WSM35G is specified for material groups S and M, which covers heat-resistant superalloys and rostfreier Stahl according to ISO 513. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WSM35G grade increases thermal resistance and supports stable edge retention, helping the insert maintain cutting performance during prolonged operation. Which cutting conditions suit the parallelogram 85° geometry? The parallelogram 85° form combined with a 15° relief is effective for medium to heavy axial engagement and interrupted cuts; the geometry reduces radial cutting forces and encourages steady chip flow. What benefit does the G77 chipbreaker provide? The chipbreaker G77 promotes reliable chip segmentation and evacuation for long-chipping alloys, reducing the likelihood of entanglement and improving operator safety and surface finish. Is this insert suitable for trochoidal milling strategies? Yes, the positive geometry and chip control features of this insert support trochoidal and high-engagement strategies where continuous chip control and edge stability are required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is recognised as a global provider of precision tooling with strong emphasis on productivity and cutting-edge material technology. Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any connection between our company and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
ADGT1204PER-G77 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSP45G carbide grade for extended edge life and reliable chip control; the geometry and 15° clearance deliver stable milling across demanding materials such as Stahl and rostfreier Stahl. Order or request application advice through Metav Werkzeuge for a rapid supply decision. ADGT1204PER-G77 WSP45G milling indexable insert — Tiger·tec Gold PVD, 15° clearance (Walter Tools) An ADGT1204PER-G77 WSP45G milling insert engineered for stable edge life and versatile face and slot milling of Stahl, rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold PVD coating for long tool life Versatile for Stahl, rostfreier Stahl and superalloys Parallelogram 85° form with 15° clearance Improved cycle times through durable coating and grade The combination of the Tiger·tec Gold coating and the WSP45G PVD-coated carbide grade provides a measurable improvement in wear resistance and cutting-edge stability. This results in more consistent component tolerances and fewer indexings per job, which directly improves machining throughput. The PVD layer supports elevated cutting parameters while the substrate maintains toughness; together this reduces flank wear and extends effective tool life, lowering the effective cost per finished part. Reliable performance across challenging materials Designed for the ISO groups P / M / S, the insert covers unalloyed and alloyed Stahl, rostfreier Stahl and heat-resistant superalloys or titanium. The WSP45G grade is formulated to balance toughness and heat resistance: for steels it supports controlled chip formation under typical thermal loads, for stainless steels it combats build-up edge tendencies, and for superalloys it preserves edge integrity under poor thermal conductivity. This breadth of capability makes the insert suited to mixed-production environments and flexible job scheduling. Geometry that enhances process stability and surface finish The Parallelogram 85° shape combined with a 15° clearance angle produces a stable cutting contact that reduces radial forces and improves part geometry accuracy. The integrated G77 chipbreaker fosters predictable swarf control, facilitating safe evacuation at moderate to high feeds and helping to achieve consistent surface quality without secondary finishing. The compact plate size and a slim 04 thickness enable tight-tooling arrangements and minimise tool overhang where rigidity matters. Practical integration and economic benefits in the toolroom The insert is supplied in the ADGT1204PER-G77 designation for straightforward identification and replacement in established toolholders. Its versatility reduces tooling variants held in inventory and supports leaner tool rollouts for mixed-material contracts. Proven for productive milling operations, the grade also contributes to fewer workpiece rejects and steadier cycle times. For application-specific process windows and recommended cutting data, technical consultation is available to match speeds and feeds to machine dynamics and job requirements. For process-stable milling with Walter Tools' Tiger·tec Gold technology, contact Metav Werkzeuge for application advice or to check stock and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADGT1204PER-G77-WSP45G-WALTER Item: Fräswendeschneidplatte ADGT1204PER-G77 WSP45G Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 15° Plate form: Parallelogram 85° Plate size: 12 Plate thickness: 04 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated carbide) Chipbreaker: G77 Applicable materials: P / M / S Execution: T FAQ What materials can this insert machine effectively? The ADGT1204PER-G77 WSP45G insert is designed for ISO groups P, M and S, enabling machining of Stahl, rostfreier Stahl and heat-resistant superalloys. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold reduces wear and supports higher cutting parameters; the coating on the WSP45G grade extends edge life and improves process stability under continuous production. Is the Parallelogram 85° geometry suitable for slotting? The Parallelogram 85° form provides a controlled cutting engagement that is appropriate for many face and slot milling operations while preserving stability and surface quality. What role does the G77 chipbreaker play in machining? The G77 chipbreaker promotes predictable chip formation and evacuation, lowering the risk of entanglement and helping to maintain consistent surface finish during moderate to high feed milling. How is the insert identified for replacement and tool management? The designation ADGT1204PER-G77 WSP45G identifies the geometry, chipbreaker and grade, simplifying reordering and tool inventory management for production planning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT160612R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold wear resistance and the versatile WSP45G grade to ensure stable, repeatable milling of steels and high-temperature alloys; benefit from precise geometry and controlled chip formation for high productivity. Order directly via Metav Werkzeuge or consult the team for application advice and availability. ADGT160612R-F56 WSP45G milling insert (Parallelogram 85°, 15° clearance) by Walter Tools A high-performance milling insert, ADGT160612R-F56 WSP45G, optimised for versatile milling of steel, stainless steel and heat‑resistant alloys in production environments Tiger·tec Gold PVD coating for extended tool life Suitable for steel, stainless steel and superalloys Parallelogram 85° shape with 15° clearance Stable chip control with F56 chipbreaker Consistent edge life through Tiger·tec Gold technology The combination of the WSP45G grade and the Tiger·tec Gold coating delivers a PVD‑coated cemented carbide that is engineered for durability and stable cutting-edge behaviour. This results in fewer index changes and longer tool cycles, which supports predictable production planning and lowers per‑part machining cost. The coating and substrate pairing is designed to manage the heat and mechanical loads typical of milling operations on steels and stainless materials, providing improved resistance to flank wear and chipping. Controlled chips and surface quality for reliable throughput The F56 chipbreaker together with the parallelogram geometry and 15° clearance promotes consistent chip formation and evacuation. A steady chip flow reduces rework and minimises the risk of built-up edge that can degrade finished surfaces. The insert’s corner radius of 1.2 mm balances edge strength and surface finish, enabling operators to maintain high feed rates without sacrificing component quality. These geometric choices translate directly into fewer interruptions and a more reliable machining process. Broad material capability for flexible job shops and production lines Designed for the P/M/S material groups, this insert is suitable for unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium alloys. The WSP45G grade is a tough, versatile PVD variant tailored to the demands of such materials, offering a compromise between wear resistance and edge stability. Using a single insert family across different component types simplifies inventory and speeds up job changeovers, making it especially practical for mixed‑model production or job shops handling diverse materials. Process security and productivity with industrial geometry The insert’s parallelogram 85° form and the defined tolerance class G support repeatable seating and accurate positioning in standard milling cutters. Robust geometry and the Walter Tools manufacturing standard contribute to stable cutting forces and reproducible results. Where cycle times and surface integrity matter, the combination of grade, chipbreaker and form supports a process‑orientated approach: fewer variances in tool life, predictable maintenance intervals and a reliable baseline for optimising cutting parameters. Contact Metav Werkzeuge for tailored application support on Walter Tools milling solutions, technical data requests and availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: ADGT160612R-F56-WSP45G-WALTER Designation: ADGT160612R-F56 WSP45G Brand: Walter Tools Facts Size: 16 Thickness: 06 Corner radius: 1.2 Clearance angle: 15° Shape: Parallelogram 85° Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSP45G (PVD‑coated cemented carbide) Chipbreaker: F56 Material application groups: P / M / S Execution: T FAQ What materials can this insert machine effectively? The insert is intended for machining steel, stainless steel and heat‑resistant superalloys (P / M / S); the WSP45G grade and Tiger·tec Gold coating support secure chip formation and edge life on these groups. How does the F56 chipbreaker affect milling performance? The F56 chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of built‑up edge during milling with the ADGT160612R‑F56 WSP45G insert. Is this insert compatible with standard milling cutters for parallelogram inserts? Yes, the geometry is a parallelogram 85° form and is manufactured to tolerance class G, supporting correct seating in compatible milling cutter bodies designed for this insert family. What advantages does the Tiger·tec Gold series offer in production? The Tiger·tec Gold series provides a balanced PVD coating system that enhances wear resistance and thermal stability, extending tool life and improving process reliability for repeated production runs. Can the insert be used for roughing as well as finishing? With its 1.2 mm corner radius and robust grade, the insert suits a range of strategies from semi‑finishing to roughing, depending on chosen feeds and depths of cut; selection should follow the machining plan and component tolerance requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory‑new product of the stated manufacturer.
ADGT160616R-D67 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the versatile WSP45G grade to achieve stable chip control and extended tool life during demanding milling operations; order directly via Metav Werkzeuge or consult our specialists for application guidance. ADGT160616R-D67 WSP45G – milling insert, Tiger·tec Gold, parallelogram 85° (Walter Tools) The ADGT160616R-D67 WSP45G is a PVD-coated carbide milling insert designed for versatile operations across steels, stainless steels and heat-resistant alloys, optimised for reliable chip control and consistent finishing. Tiger·tec Gold coating for extended tool life Versatile for P / M / S material groups Parallelogram 85° shape for stable engagement 1.6 mm corner radius for improved surface quality High-performance cutting for steels, stainless steels and superalloys The combination of WSP45G grade and Tiger·tec Gold surface technology delivers a PVD-coated carbide cutting edge that balances toughness and wear resistance. This composition is tailored to the thermal and mechanical loads encountered when machining P / M / S material groups, meaning improved process reliability in mixed production environments. The insert’s tough substrate and thin, adherent coating reduce the tendency for build-up and edge degradation, which supports longer intervals between tool changes and therefore higher overall productivity. Geometry that secures consistent surface quality and tool life A parallelogram 85° form combined with a 1.6 mm corner radius and a 15° relief angle provides a geometry that stabilises engagement and distributes cutting forces evenly. This results in lower vibration and a more uniform chip flow, with direct benefits for consistent surface quality and reduced cycle-time variation. The form also supports predictable wear patterns, which simplifies process planning and makes repeatable finishes easier to achieve in serial milling tasks. Coating and chip control for economical milling The dedicated D67 chipbreaker is matched to the insert geometry and coating, promoting controlled chip formation across a broad range of feeds and depths of cut. This yields efficient evacuation and safer machining in thin-walled or interrupted cuts. Together with the Tiger·tec Gold treatment, the insert demonstrates enhanced resistance to abrasive and adhesive wear, contributing to a lower cost per component and dependable performance in production settings. As a Walter Tools solution, the insert supports standardised tool setups and consistent output across batches. Contact Metav Werkzeuge for tailored application advice and to discuss supply options for Walter Tools Tiger·tec Gold inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: ADGT160616R-D67-WSP45G-WALTER Designation: ADGT160616R-D67 WSP45G Product type: milling insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Shape: parallelogram 85° Applicable material groups: P / M / S Chipbreaker: D67 Execution: T Core measurements Corner radius: 1.6 mm Relief angle: 15° Insert size: 16 Thickness code: 06 Tolerance class: G Special features PVD-coated carbide (coated cemented carbide) Suitable for steel, stainless steel, superalloys and titanium Parallelogram 85° form for stable engagement Chipbreaker D67 for controlled chips Tiger·tec Gold coating technology Versatile milling applications FAQ Which materials can be machined with this insert? The ADGT160616R-D67 WSP45G insert is specified for P / M / S material groups, covering steels, rostfreie Stähle (stainless steels) and heat-resistant superalloys or titanium. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold enhances wear resistance and thermal stability; with the ADGT160616R-D67 WSP45G this coating improves edge life and supports stable performance under elevated cutting temperatures. What does the D67 chipbreaker do? The D67 chipbreaker is engineered for controlled chip formation and evacuation, reducing the risk of chip-related interruptions and contributing to consistent surface finish when milling. How does the parallelogram 85° geometry help in milling? The parallelogram 85° form increases engagement stability and distributes cutting forces, lowering vibration and improving repeatability and surface quality in slotting and face milling operations. Is this insert suitable for interrupted cuts or thin-walled parts? Yes; the combination of a robust substrate, Tiger·tec Gold coating and the D67 chipbreaker makes the ADGT160616R-D67 WSP45G suitable for applications with interrupted cuts and where secure chip control is required. Manufacturer: Walter Tools; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the listed manufacturers. The offered article is original, brand-new merchandise from the manufacturer.
ADGT160616R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, robust WSP45G grade and precision parallelogram geometry for consistent milling performance across demanding materials. Order the ADGT160616R‑F56 WSP45G insert directly via Metav Werkzeuge or consult our specialists for tailored machining advice. ADGT160616R-F56 WSP45G — Fräswendeschneidplatte (milling indexable insert), Tiger·tec Gold, for Steel / Stainless / Superalloys — Walter Tools ADGT160616R‑F56 WSP45G is a versatile milling indexable insert designed for general and demanding milling applications on Steel, stainless steel and heat‑resistant superalloys; suitable for operations requiring stable chip formation and reliable edge life. Tiger·tec Gold PVD coating Versatile for Steel, stainless steel, superalloys Parallelogram 85° form for stable milling 15° relief angle with 1.6 mm corner radius Durable coating and grade for longer tool life The combination of the Tiger·tec Gold series and the WSP45G grade provides a PVD‑coated cemented carbide substrate engineered for toughness and wear resistance. This configuration supports stable chip control under variable cutting conditions and reduces flank and crater wear, which helps to extend service intervals. For operations in both intermittent and continuous cuts, the result is predictable tool life and fewer tool changes, improving overall process efficiency. Geometry engineered for stability and surface quality The parallelogram 85° insert form, paired with a 15° relief angle, reduces radial forces during side milling and contributes to a more balanced load distribution on the cutting edge. The 1.6 mm corner radius strengthens the tip against mechanical and thermal shock while contributing to improved surface finish on workpieces. These geometric choices make the insert suitable for applications where both dimensional stability and surface integrity are required, such as semi‑finishing and finishing passes on shafts and contoured components. Application range and process benefits Designed for machining groups P, M and S, this insert is appropriate for unalloyed and alloyed Steel, stainless steel and superalloys/titanium. The material compatibility and the robust chipbreaker designation (F56) assist in achieving secure chip formation even under the higher temperatures and sticky chip tendencies of stainless and heat‑resistant alloys. In production, this translates to fewer interruptions, more consistent cycle times and better reproducibility from batch to batch. Contact Metav Werkzeuge today to specify the ADGT160616R-F56 WSP45G insert from Walter Tools for production‑critical milling — our technical advisers will recommend the optimal grade and holder for the intended application. Technical data SKU: ADGT160616R-F56-WSP45G-WALTER Designation: ADGT160616R-F56 WSP45G Manufacturer: Walter Tools Facts Size: 16 mm Corner radius: 1.6 mm Relief angle: 15° Thickness: 06 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: F56 Geometry: Parallelogram 85° Material: PVD‑coated cemented carbide Execution: T Applicable materials: Steel, stainless steel, superalloys/titanium FAQ What materials can be machined with this insert? The ADGT160616R‑F56 WSP45G insert from Walter Tools is specified for groups P, M and S — namely Steel, stainless steel and heat‑resistant superalloys/titanium. Which machining tasks suit this insert best? Its parallelogram geometry and 1.6 mm corner radius make the insert well suited to semi‑finishing and finishing operations where stable cutting forces and good surface quality are priorities. How does the Tiger·tec Gold series improve performance? The Tiger·tec Gold PVD coating on the WSP45G grade enhances wear resistance and edge stability, resulting in longer tool life and more consistent machining results. Is the chipbreaker suitable for stainless and heat‑resistant alloys? Yes; the F56 chipbreaker supports secure chip control under the thermal and material tendencies of stainless steels and superalloys, reducing the risk of built‑up edge and unstable chips. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the referenced manufacturers. The offered article is an original, brand‑new product of the manufacturer.
ADGT160620R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from high cutting stability and reliable chip control thanks to the Tiger·tec Gold coating and the WSP45G carbide grade; ideal for productive milling of steel, stainless steel and heat‑resistant alloys. Order the ADGT160620R-F56 WSP45G directly via Metav Werkzeuge or ask the consultants for process recommendations. ADGT160620R-F56 WSP45G – Indexable milling insert with Tiger·tec Gold coating, 2 mm corner radius (Walter Tools) The ADGT160620R-F56 WSP45G is a parallelogram 85° indexable milling insert engineered for versatile face and shoulder milling in steels, stainless steels and heat‑resistant superalloys. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Parallelogram 85° form, 15° clearance 2 mm corner radius for improved edge strength Achieve higher process efficiency with a PVD‑coated grade The Tiger·tec Gold PVD coating combined with the WSP45G grade delivers consistent wear resistance and prolonged tool life under interrupted and continuous milling. The selected coating technology reduces friction and supports stable cutting temperatures, which in turn enables higher cutting parameters and improved throughput. The integrated chipbreaker F56 promotes predictable chip formation, reducing rework and machine downtime while supporting efficient material removal rates. Stable cutting edge for demanding materials Designed for the thermal and mechanical stresses of machining P / M / S materials, the insert ensures a robust cutting edge when working with unalloyed and alloyed steel, tougher stainless steel grades and high‑temperature superalloys. The 2 mm corner radius enhances resistance to edge chipping, while the 15° clearance angle reduces rubbing on the flank face. Together these design elements provide edge stability and reproducible surface quality, helping to safeguard component tolerances and minimise scrap. Geometry that supports flexible process planning The parallelogram 85° form offers advantageous approach angles for a range of milling strategies, giving process planners the ability to balance axial and radial engagement without changing tooling. The consistent tolerance class G and execution T support interchangeability in multi‑op setups and make tool management straightforward. This geometry benefits shops aiming for quick tool index changes and steady cycle times across batches. Clear material guidance and application scope The insert is specified for machining the ISO material groups indicated by P (steel), M (stainless steels) and S (heat‑resistant superalloys and titanium). For workshop engineers and production managers, this means a single grade can cover a broad mix of parts, reducing tool variants in stock and simplifying procurement. For less experienced staff, the grade’s balanced toughness and wear resistance provide a forgiving performance window during process development. Contact Metav Werkzeuge for application advice, availability and tailored recommendations on Walter Tools Tiger·tec Gold inserts such as the ADGT160620R-F56 WSP45G Technical data Article number: ADGT160620R-F56-WSP45G-WALTER Designation: ADGT160620R-F56 WSP45G Product type: Indexable milling insert (fräswendeschneidplatte) Series: Tiger‑tec Gold Grade: WSP45G Core specifications Clearance angle: 15° Corner radius: 2 mm Insert form: Parallelogram 85° Insert size: 16 Thickness: 06 Chipbreaker: F56 Tolerance class: G Execution: T Materials & features Coating: Tiger·tec Gold (PVD) Material suitability: P / M / S (steel, stainless steel, superalloys) Intended use: Milling applications Manufacturer: Walter Tools SKU: ADGT160620R-F56-WSP45G-WALTER FAQ What materials are suitable for this insert? The insert is suitable for machining the ISO groups P, M and S, meaning steel, stainless steels and heat‑resistant superalloys; the WSP45G grade and Tiger·tec Gold coating are tuned for these materials. How does the chipbreaker F56 help in production? Chipbreaker F56 on the ADGT160620R‑F56 WSP45G improves chip formation and evacuation, supporting stable cutting forces and reducing the risk of chip‑related interruptions in milling operations. Is the insert available in different tolerances or executions? This item is supplied in tolerance class G and execution T as specified; alternative executions or tolerance grades may be available through Metav Werkzeuge on request. What advantages does the parallelogram 85° form provide? The 85° parallelogram form offers versatile cutting angles for face and shoulder milling, allowing optimisation of radial and axial engagements without extensive fixture changes. Can this insert be used for high‑speed milling? The combination of Tiger·tec Gold coating and the WSP45G grade supports elevated cutting parameters compared with uncoated grades; suitability for specific high‑speed applications should be confirmed with cutting data from Metav Werkzeuge. Manufacturer/Responsible: Walter Tools; part of Walter AG; Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT160632R-F56 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the versatile WSP45G grade and the 15° clearance angle for efficient, stable milling; these features support consistent chip control and extended tool life. Order the ADGT160632R-F56 WSP45G milling indexable insert directly via Metav Werkzeuge or ask our consultants if needed. ADGT160632R-F56 WSP45G milling indexable insert — Parallelogram 85°, 3.2 mm corner radius (Walter Tools) ADGT160632R-F56 WSP45G is a robust, coated milling insert designed for general and demanding milling applications, featuring Tiger‑tec Gold technology for improved edge stability and wear resistance Tiger·tec Gold coated grade WSP45G For P / M / S materials (Stahl, rostfreier Stahl, superalloys) Parallelogram 85° shape, 3.2 mm corner radius Positive relief 15° for stable chip formation Durable coating and measurable wear resistance for longer tool life The Tiger‑tec Gold coating applied to this insert produces a hard, wear‑resistant surface that reduces flank wear under cyclic thermal loads. As a WSP45G sort, the insert combines a tough substrate with a PVD coating to balance edge toughness and abrasion resistance, which results in fewer indexings and longer effective life in interrupted or varying cut conditions. This means more predictable tool change intervals and improved process economy in production environments handling mixed batches. Geometry designed to secure chip control and surface quality The parallelogram 85° platform and 3.2 mm corner radius provide a compromise between strength and edge engagement: the angle distributes cutting forces across a larger area while the corner radius supports a stable cutting edge for fine surface finishes. The positive clearance angle of 15° reduces rubbing and minimises built‑up edge tendencies, particularly when machining heat‑generating materials. These geometric choices translate into consistent surface integrity and reduced load peaks on the tool holder. Proven versatility across common industrial materials This grade is developed for P / M / S applications: P for a wide range of Stahl, M for rostfreier Stahl, and S for heat‑resistant superalloys and titanium. The combination of substrate and coating supports secure chip formation when cutting ductile steels as well as tougher, high‑temperature alloys. For operations where material mixes occur on a single job, the insert offers a pragmatic solution that can reduce tool inventory while maintaining reliable performance and repeatability. Practical use and integration into production workflows The insert’s form and indexable design enable straightforward seat and clamp compatibility in standard toolholders for parallelogram inserts, speeding up regrinds and index changes. The F56 chipbreaker characteristic promotes segmented chips and smoother evacuation in medium to heavy milling passes. For process planners, the balanced feature set facilitates optimisation of cutting speeds and feeds to achieve either higher metal removal rates or improved surface finish, depending on the priority. Contact Metav Werkzeuge for tailored selection advice on Walter Tools Tiger‑tec Gold inserts and ensure the right insert geometry and grade are chosen for the intended application Technical Data Article number / SKU: ADGT160632R-F56-WSP45G-WALTER Designation: ADGT160632R-F56 WSP45G Label: Fräswendeschneidplatte ADGT160632R-F56 WSP45G Walter Tools Facts Relief angle: 15° Corner radius: 3.2 mm Plate size: 16 Plate thickness: 06 Special features Series / Technology: Tiger‑tec Gold Grade: WSP45G Chipbreaker: F56 Plate form: Parallelogram 85° Substrate / coating: coated cemented carbide (PVD technology) Material suitability: P / M / S (Stahl; rostfreier Stahl; heat‑resistant superalloys and titanium) Tolerance class: G Execution: T Manufacturer: Walter Tools FAQ Which materials can be machined with this insert? The insert is suitable for P / M / S groups; it machines Stahl, rostfreier Stahl and heat‑resistant superalloys or titanium reliably when using appropriate cutting parameters. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold technology on this insert improves wear resistance and edge stability, enhancing lifetime and reducing unplanned index changes in mixed‑material production. How does the 85° parallelogram shape affect milling performance? The parallelogram 85° form offers stable clamping and favourable force distribution, promoting better chip control and consistent surface quality during side and face milling. Is the ADGT160632R-F56 WSP45G suited to interrupted cuts? Yes, the combination of a tough substrate and PVD coating in the WSP45G grade provides resilience against impact and thermal shock typical of interrupted milling. What does the F56 chipbreaker mean for chip formation? The F56 chipbreaker is engineered for segmented chips and smooth evacuation in medium to heavy passes, supporting reliable machining without frequent clearance issues. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer Walter Tools.
ADGT160640R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold PVD grade, stable chip control and a parallelogram geometry with 15° relief for consistent milling performance. Order the ADGT160640R‑F56 WSP45G through Metav Werkzeuge or consult our specialists for cutting-parameter recommendations. ADGT160640R-F56 WSP45G indexable milling insert – Tiger‑tec Gold, P/M/S applications – Walter Tools ADGT160640R-F56 WSP45G is a coated carbide indexable milling insert designed for versatile face and profile milling across steel, stainless steel and heat‑resistant alloys Tiger‑tec Gold PVD-coated carbide grade Suitable for steel, stainless steel, superalloys Parallelogram 85° form with 15° relief Reliable process stability for mixed production runs The Tiger‑tec Gold grade delivers a balance of toughness and wear resistance tailored to frequent interruptions and batch variety. As a PVD‑coated carbide grade, the insert supports consistent edge life when machining steel, stainless steel and high‑temperature alloys, reducing tool changes and downtime. This leads to improved cycle times and predictable productivity in mixed‑material shops. Where chip formation is critical, the grade’s coating enhances heat resistance and wear control without compromising toughness. Controlled chips and secure cutting edges for safer cycles A defined chipbreaker designation and the insert’s geometry combine to provide stable chip control and a secure cutting edge. The chipbreaker F56 and the parallelogram 85° plate form direct chips reliably away from the cutting zone, lowering the risk of recutting and improving surface integrity. For operators less familiar with indexable milling terminology: a chipbreaker is a relief geometry that breaks and guides the metal swarf to prevent long, entangling chips and to protect the cutting edge during interrupted cuts. Geometry and angles designed for consistent surface quality The insert’s 15° relief angle and a corner radius of 4 contribute to a predictable cutting engagement and repeatable surface finish. The relief angle reduces rubbing on the flank, while the corner radius helps distribute cutting forces and extend edge life. These geometric choices translate into fewer rework operations and steadier dimensional accuracy — advantages that matter on components requiring tight tolerances or repeatable finishes. Application guidance and machining advantages This grade is specified for groups P, M and S according to ISO classifications, meaning it is suitable for unalloyed and alloyed steel, rostfreier Stahl (stainless steel) and heat‑resistant superalloys and titanium. The insert is available in the ADGT160640R‑F56 configuration with the WSP45G grade, offering a practical solution for job shops and production environments seeking a versatile milling option. For best results, pair the insert with appropriate cutting data for each material group and a holder compatible with a parallelogram 85° insert form. Contact Metav Werkzeuge for tailored cutting parameters, batch recommendations or a technical quotation for Walter Tools Tiger‑tec Gold inserts Technical data Article number: ADGT160640R-F56-WSP45G-WALTER Label: Fräswendeschneidplatte ADGT160640R-F56 WSP45G Walter Tools Product type: Fräswendeschneidplatte / Indexable milling insert Manufacturer: Walter Tools Grade/series: Tiger‑tec Gold / WSP45G Chipbreaker: F56 Facts Relief angle: 15° Corner radius: 4 Plate form: Parallelogram 85° Plate size: 16 Thickness code: 06 Tolerance class: G Special features PVD‑coated carbide grade Suitable for material groups P / M / S (steel, stainless steel, superalloys/titanium) Robust chip control for interrupted cuts Designed for consistent edge life and repeatable surface quality FAQ What materials can this insert machine effectively? The ADGT160640R‑F56 WSP45G grade is formulated for ISO groups P, M and S, making it suitable for machining steel, stainless steel and heat‑resistant superalloys or titanium. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold’s PVD coating enhances heat and wear resistance while preserving toughness, so the insert maintains cutting performance and delivers predictable tool life under varying cutting conditions. What does the chipbreaker F56 do? The F56 chipbreaker controls chip form and evacuation during milling, reducing the risk of long chips and protecting the cutting edge—especially useful in interrupted or variable‑depth milling. Which holder geometry matches this insert? Use a holder compatible with a parallelogram 85° insert form and the ADGT160640R‑F56 seat to ensure correct clearance and secure clamping for optimal performance. Is the corner radius of 4 suitable for finishing? A corner radius of 4 provides a balance between strength and surface finish; it supports durable edges while still achieving consistent surface quality in typical milling applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation with or endorsement by our company. The offered item is original, brand‑new goods from the named manufacturer.
ADGT1606PER-D51 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and an optimised D51 chipbreaker for consistent chip control and extended tool life; the result is productive machining of steel and cast iron with predictable performance. Order the insert directly via Metav Werkzeuge or ask the consultants for selection support. ADGT1606PER-D51 WKP25S – milling insert, Tiger·tec Silver coating, D51 chipbreaker | Walter Tools The ADGT1606PER-D51 WKP25S is a parallelogram milling insert engineered for reliable, high-productivity machining of steel and cast iron in a wide range of industrial applications Tiger·tec Silver coating for extended life D51 chipbreaker for reliable chip control Parallelogram 85° form for flexible setups Suitable for steel and cast iron machining Consistent chip control for higher throughput The D51 chipbreaker has been developed to deliver stable chip formation under variable cutting conditions, which directly improves machining predictability. By reducing erratic chip shapes and minimising entanglement, the insert lowers the risk of tool damage and machine downtime. This results in a measurable uplift in process throughput and a reduction in scrap rates. The chip geometry is optimised for interrupted and continuous cuts, so operators and process engineers benefit from fewer adjustments and a steadier surface-finish performance. In practice, the controlled chip evacuation also helps to maintain coolant flow and heat management at the cutting edge, enhancing overall efficiency. Broad material capability with high process security The WKP25S grade, part of the Tiger·tec Silver series, is a coated carbide engineered for demanding environments typical in machining of P and K materials. P indicates suitability for steel, including unalloyed and alloyed grades, while K denotes compatibility with cast iron. The coating and substrate combination offers improved wear resistance and edge stability, which supports higher cutting speeds and repeatable results. For shops aiming to standardise on a single insert across mixed workpieces, this grade reduces complexity while maintaining process security and surface-quality consistency. Integration benefits that reduce cost per part The parallelogram plate form with an 85° cutting geometry and a 15° relief angle provides a versatile seating and approach for many milling fixtures. This geometry supports secure clamping and allows multiple cutting edges to be indexed, which minimises tool changes and lowers tooling costs. The plate’s dimensions and thickness ensure compatibility with common toolholders, enabling quick replacement and minimal setup time. Together, the geometry, coating and chip control contribute to an extended tool life and a lower cost per finished component, making the solution particularly attractive for medium- to high-volume production runs. For stable, repeatable milling with proven wear performance, request Walter Tools Tiger·tec Silver inserts from Metav Werkzeuge — contact Metav Werkzeuge for application advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: ADGT1606PER-D51-WKP25S-WALTER Designation: ADGT1606PER-D51 Label: Fräswendeschneidplatte ADGT1606PER-D51 WKP25S Walter Tools Facts Plate size: 16 Plate thickness: 06 Relief angle: 15° Plate form angle: Parallelogram 85° Tolerance class: G Special features Grade: WKP25S (Tiger·tec Silver) Chipbreaker: D51 Material suitability: P / K (steel, cast iron) Series designation: Tiger·tec Silver Execution: T Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The ADGT1606PER-D51 WKP25S is suited to machining steel (P) and cast iron (K); the WKP25S grade was developed for these material groups. How does the D51 chipbreaker improve production? The D51 chipbreaker promotes consistent chip formation and evacuation, which improves process reliability and surface finish when using the ADGT1606PER-D51 WKP25S insert. Can the insert be used at higher cutting speeds? Yes, the Tiger·tec Silver coating and WKP25S substrate combination increases wear resistance and supports higher cutting speeds compared with uncoated grades. What is the benefit of the parallelogram 85° form? The parallelogram 85° geometry enables flexible toolholder setups and secure clamping, reducing setup time and allowing multiple indexable edges to be used before replacement. Which series does the grade belong to and what does that mean? The grade WKP25S belongs to the Tiger·tec Silver series, which is a coated carbide family designed for improved tool life and stable machining of P and K materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the listed brands. The offered item is an original, factory-new product of the manufacturer.
ADGT1606PER-D51 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WKP35G grade for consistent chip control and extended tool life; the parallelogram geometry and D51 chipbreaker further ensure stable cutting in demanding milling operations. Order the ADGT1606PER-D51 insert via Metav Werkzeuge or consult the team for application-specific recommendations. ADGT1606PER-D51 WKP35G milling insert – Walter Tools (for Steel & Cast Iron, Tiger·tec Gold) The ADGT1606PER-D51 WKP35G is a parallelogram milling indexable insert engineered for productive machining of steel and cast iron in industrial milling applications. Tiger·tec Gold coating for extended tool life WKP35G grade suited to steel and cast iron Parallelogram 85° geometry for secure engagement 15° clearance angle for stable cutting D51 chipbreaker for consistent chip control Consistent wear resistance and process reliability The combination of the WKP35G carbide grade with the Tiger·tec Gold coating delivers a balanced performance profile for both roughing and medium-finishing operations on steel and cast iron. The coating reduces adhesive wear and improves thermal stability, which translates into longer tool life and fewer interruptions for index changes. This behaviour supports predictable production cycles and helps maintain surface quality across batches, while the coated carbide substrate manages the heat and abrasion typical for these workpiece groups. Geometry and chip control that raise machining stability The Parallelogram 85° insert shape and the 15° clearance angle promote secure seating in the cutter body and effective engagement at the cut edge; the result is reduced vibration and improved dimensional stability. The integrated D51 chipbreaker is optimised to form controllable chips for intermittent and continuous cutting conditions, lowering the risk of chip-related interruptions and improving swarf evacuation. The insert’s 16 size and 06 thickness provide a robust cutting edge suited to conventional milling holders while supporting repeatable clamping and indexability. Practical advantages for production planning and tool management With a tolerance class G, this insert meets industrial dimensional expectations for reliable mounting and reproducible tool offsets, which simplifies tool setting and machine programming. The grade’s broad applicability to ISO group P and K (representing steel and cast iron) offers flexibility across multiple components without frequent tool changes, supporting lean tool inventories. For process optimisation, Metav Werkzeuge can advise on cutter selection and application parameters to exploit the insert’s strengths while balancing productivity and surface finish. Contact Metav Werkzeuge for tailored cutting data, recommendations on Walter Tools Tiger·tec Gold inserts, and ordering of the ADGT1606PER-D51 WKP35G via +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: ADGT1606PER-D51-WKP35G-WALTER Label: Milling indexable insert ADGT1606PER-D51 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Facts Insert size: 16 Thickness: 06 Clearance angle: 15° Geometry angle: 85° Tolerance class: G Special features Chipbreaker: D51 Applicable materials: Steel (P), Cast iron (K) Coating: Tiger·tec Gold Insert designation: ADGT1606PER-D51 WKP35G Execution: T Shape: Parallelogram FAQ Which workpiece materials are suitable for this insert? The ADGT1606PER-D51 WKP35G insert from Walter Tools is designed for machining steel (ISO group P) and cast iron (ISO group K), with the WKP35G grade optimised for the typical heat and chip behaviour of these materials. What are the key geometry features that influence performance? The parallelogram shape with an 85° edge, a 15° clearance angle and the D51 chipbreaker define the insert’s cutting behaviour; together they provide secure seating, stable cutting forces and controlled chip formation for consistent milling results. How does the WKP35G grade differ from other grades? WKP35G is a coated carbide grade within Walter Tools’ Tiger·tec Gold family, offering a balanced combination of wear resistance and thermal stability aimed at productive machining of steel and cast iron compared with uncoated or general-purpose grades. Which tool holders are compatible with this insert designation? The ADGT1606PER-D51 geometry requires a milling cutter body that accepts the ADGT1606PER-D51 seat; compatibility depends on the cutter manufacturer and seat type, so match the insert designation to the holder specification. What does tolerance class G mean for tool setup? Tolerance class G indicates a specific dimensional tolerance level that supports accurate seating and repeatable offsets, simplifying setup and contributing to consistent component tolerances during serial production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned here solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer. The brand Walter Tools is used where applicable.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com