Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
ADGT1606PER-D51 WKP35S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver performance and the WKP35S grade for reliable machining of steel and cast iron, combining long tool life with consistent chip control; order the ADGT1606PER-D51 WKP35S directly via Metav Werkzeuge or ask the consultants for application advice. ADGT1606PER-D51 WKP35S milling insert — Tiger·tec Silver grade, for steel and cast iron (Walter Tools) The ADGT1606PER-D51 WKP35S is a precision milling insert from Walter Tools designed for productive face and shoulder milling in steel and cast iron, offering robust wear resistance and stable chip formation. Tiger·tec Silver coating for extended life Optimised D51 chipbreaker for stable chips 15° clearance angle for reliable engagement Parallelogram 85° form for versatile milling Robust wear resistance for demanding steel and cast-iron applications The combination of the Tiger·tec Silver coating and the WKP35S substrate delivers enhanced abrasion resistance and thermal stability, which translates into longer tool life and fewer insert changes during production. This grade was developed for typical steel and cast-iron conditions and is optimised to counter the high temperatures and abrasive effects that occur during heavy-duty milling. The result is predictable tool performance and improved process stability when machining a wide range of P and K workpiece groups. Precision geometry that improves surface quality and engagement A Parallelogram 85° form and a 15° clearance angle ensure secure seating and consistent cutting engagement across various milling strategies. The insert’s dimensional setup — size 16 with a thickness coded 06 and tolerance class G — supports accurate positioning in modern milling cutters, reducing runout sensitivity and contributing to a reliable surface finish. These geometrical choices make the insert suitable for both finishing and light roughing where repeatable accuracy and controlled cutting forces are required. Effective chip control that reduces interruptions The integrated D51 chipbreaker is shaped to promote short, manageable chips in both steel and cast iron, reducing the risk of chip entanglement and improving coolant access at the cutting zone. Stable chip formation lowers downtime for manual cleaning and supports safer automated operations. Less frequent interruptions for chip disposal and improved chip flow also contribute to higher effective machining uptime and enhanced operator safety. Balanced economy through consistent productivity Designed by Walter Tools within the Tiger·tec Silver family, this insert offers a pragmatic balance of wear resistance, dimensional stability and broad application scope. The grade’s performance characteristics aim to lower total machining costs by extending edge life and reducing the frequency of tool changes. For production environments seeking repeatable results across mixed batches of unalloyed and alloyed steels as well as grey and nodular cast irons, the insert provides a cost-effective, dependable solution. For reliable, high-process productivity with Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for ordering and material-specific recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADGT1606PER-D51-WKP35S-WALTER Name: ADGT1606PER-D51 WKP35S Brand: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Facts Plate size: 16 Thickness code: 06 Free angle: 15° Plate form: Parallelogram 85° Chipbreaker: D51 Tolerance class: G Special features Material groups: P / K Main applications: Steel and cast iron Execution: T Baureihe: Tiger-tec Silver Sortenbeschreibung: Coated cemented carbide FAQ What materials is this milling insert suitable for? The ADGT1606PER-D51 WKP35S from Walter Tools is suitable for steel (P) and cast iron (K), with the WKP35S grade engineered to handle the thermal and abrasive demands of these material groups. What benefit does the D51 chipbreaker provide? The D51 chipbreaker on this insert promotes short, controllable chips and improved chip evacuation, which reduces interruptions and supports safer, more efficient milling with the ADGT1606PER-D51 WKP35S. Which geometric features improve stability and finish? The Parallelogram 85° form and 15° clearance angle provide secure engagement and consistent cutting action, enhancing surface quality and reducing sensitivity to cutter runout when using this Walter Tools insert. How does the Tiger·tec Silver series influence productivity? Tiger·tec Silver coating increases wear resistance and thermal performance; when combined with the WKP35S grade it extends edge life and helps maintain cutting parameters for longer production runs with the ADGT1606PER-D51 WKP35S. Is this insert suitable for finishing and roughing operations? Yes — the geometry and chip control of this insert make it versatile for both finishing and light to medium roughing on steel and cast iron, offering a balance between surface quality and tool life. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT1606PER-D51 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, versatile material coverage and optimised chip control for consistent production results; order the insert directly via Metav Werkzeuge or consult the specialists if further application data is required. ADGT1606PER-D51 WSP45G Fräswendeschneidplatte – Tiger·tec Gold, Walter Tools The ADGT1606PER-D51 WSP45G is a coated carbide milling insert engineered for versatile milling of steel, stainless steel and heat‑resistant alloys in industrial machining applications. Tiger·tec Gold PVD coating Parallelogram 85° insert form 15° clearance angle for secure cutting Chip control D51 for reliable swarf handling Increased throughput through optimised cutting performance The Tiger·tec Gold grade delivers a balance of wear resistance and edge stability that improves cycle times on a wide range of components. As a coated carbide insert with a PVD surface, the cutting edge resists abrasion and maintains geometry under thermal load, which translates into longer tool life and fewer indexings. For manufacturing environments seeking measurable gains in productivity, this milling grade supports higher feed rates and stable machining of both low‑alloy steels and tougher materials, reducing downtime associated with frequent insert changes. Reliable chip control and secure engagement for predictable results The combination of the chipbreaker D51 and the parallelogram 85° geometry provides consistent chip formation and evacuation during traversing and slotting operations. This design reduces the risk of chip re‑cutting and improves surface finish in finishing passes. The 15° clearance angle offers secure cutting action and helps prevent rubbing, while the insert form contributes to predictable tool orientation in multi‑axis milling setups. These features together enhance process reliability, enabling stable operation in series production where repeatability is essential. Broad material range and application advantages explained Rated for the ISO material groups P / M / S, the insert suits standard steels, stainless steels and nickel/titanium‑based superalloys. The WSP45G grade is described as a tough, multifunctional PVD variety optimised for milling; this means it copes well with variable thermal conditions and adhesive wear typical of stainless and heat‑resistant alloys. In practice, the designation indicates suitability for roughing and semi‑finishing operations where both edge life and resistance to chipping are required. The term “PVD coating” denotes a thin, hard layer applied via physical vapour deposition to improve surface hardness and reduce friction at the cutting zone. Economic benefits and quality assurance for production environments Using a well‑matched insert grade reduces total machining cost by extending life per index and lowering the frequency of tool changes. The robust cutting edge characteristics of the Tiger·tec Gold series contribute to consistent dimensional accuracy and surface quality, which helps meet inspection tolerances with fewer reworks. Selection of this insert supports a cost‑efficient workflow: the productive combination of geometry, chip management and coating minimises unexpected interruptions and promotes smoother process planning across batch sizes. Contact Metav Werkzeuge for tailored application advice or to request detailed cutting data for specific materials and depths of cut Technical Data Article number: ADGT1606PER-D51-WSP45G-WALTER Designation: ADGT1606PER-D51 WSP45G Series: Tiger·tec Gold Grade: WSP45G Version: T Manufacturer: Walter Tools Core Technical Data Insert form: Parallelogram 85° Relief/clearance angle: 15° Insert size: 16 Thickness designation: 06 Chipbreaker: D51 Tolerance class: G Material groups: P / M / S Special features and materials Coated carbide (PVD coating) Suitable for steel, stainless steel and superalloys/titanium Tough, versatile PVD grade optimised for milling Stable chip formation and edge robustness Designed for productive milling applications FAQ What machining tasks is this insert best suited for? The ADGT1606PER-D51 WSP45G insert from Walter Tools is primed for general milling tasks, including roughing and semi‑finishing of steels, stainless steels and heat‑resistant alloys. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold PVD coating on this milling insert improves wear resistance and reduces adhesive tendencies, which extends tool life and supports higher feed rates in industrial milling. Can this insert handle stainless steel reliably? Yes; the WSP45G grade is formulated for stainless steel applications and offers chip control and edge stability suited to the material’s tendency to work harden and produce built‑up edges. What role does the chipbreaker D51 play in performance? The D51 chipbreaker promotes controlled chip formation and evacuation, lowering the likelihood of re‑cutting and improving surface finish during continuous milling operations. Is the insert geometry compatible with multi‑axis milling heads? The parallelogram 85° form and 15° clearance angle provide secure engagement and predictable orientation, making the insert suitable for many multi‑axis milling configurations where consistent cutting geometry is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is recognised for precision machining solutions. Protected trademarks and brand names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no commercial affiliation implied between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
ADGT1606PER-D56 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a geometry optimised for stable cutting and proven chip control to ensure productive, low-maintenance machining of cast iron; order directly via Metav Werkzeuge or consult our specialists for application advice. ADGT1606PER-D56 WKK25G indexable milling insert — Parallelogram 85°, Tiger·tec Gold, Walter Tools ADGT1606PER-D56 WKK25G is an indexable milling insert designed for productive machining of cast iron, combining a robust geometry with a coating engineered for abrasive wear resistance Tiger·tec Gold coating for abrasive wear WKK25G grade optimised for cast iron Parallelogram 85° geometry for edge stability Chipbreaker D56 for controlled chip formation High productivity and tool life for cast iron machining The ADGT1606PER-D56 WKK25G insert features the Tiger·tec Gold coating and the WKK25G grade, which are specifically tuned to the demands of cast iron machining. The coating system and the coated-carbide substrate reduce abrasive wear and protect the cutting edge in interrupted cuts typical of grey and nodular cast irons. As a result, the insert delivers a predictable tool life and consistent surface finish, supporting uninterrupted production cycles and fewer index changes. The combination of grade and coating offers a measurable increase in process stability when cutting abrasive cast materials. Geometry and chip control that support efficient milling The parallelogram 85° outline and a 15° clearance angle provide a stable cutting geometry that resists edge chipping while maintaining a positive engagement with the workpiece. The chipbreaker D56 promotes short, controllable chips when machining brittle, abrasive cast iron, which improves evacuation and reduces the risk of re-cutting. With a plate size of 16 and a thickness of 06 the insert balances rigidity and accessibility in a range of face-milling and shoulder-milling toolholders, supporting higher feed rates without compromising edge stability. Process security and economic efficiency in production Tolerance class G and the standardised ISO-style designation ensure interchangeability and repeatability across tool assemblies. The coated-carbide construction permits sustained cutting under high abrasion, lowering the frequency of index changes and tool replacements. In production terms, this translates to reduced machine downtime and lower running costs per component. The insert’s combination of wear resistance and a stable cutting edge supports predictable scheduling and easier cost-benefit analysis for long production runs. Practical application notes and suitability This insert is intended primarily for machining cast iron materials (ISO group K). The WKK25G grade performs well in applications where short, broken chips are the norm and where abrasive wear is a controlling factor. For best results, select a toolholder compatible with parallelogram inserts and adjust cutting parameters to maintain chip dimensions recommended by the toolholder supplier. If there is uncertainty about specific cutting data or process optimisation, technical documentation and cutting charts are available to match the insert to the machine setup and workpiece properties. For reliable cast-iron performance with Walter Tools’ Tiger·tec Gold technology, contact Metav Werkzeuge for tailored recommendations and supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ADGT1606PER-D56-WKK25G-WALTER Label: Fräswendeschneidplatte ADGT1606PER-D56 WKK25G Walter Tools Designation: ADGT1606PER-D56 WKK25G Manufacturer: Walter Tools Facts Plate size: 16 Plate thickness: 06 Clearance angle: 15° Geometry: Parallelogram 85° Tolerance class: G Special features Series: Tiger-tec Gold Grade: WKK25G Chipbreaker: D56 Substrate: coated carbide Application: cast iron (ISO group K) FAQ What materials is this insert suitable for? The ADGT1606PER-D56 WKK25G insert is optimised for cast iron machining and is specified for ISO group K materials. How does the Tiger·tec Gold coating help in production? Tiger·tec Gold on the WKK25G grade reduces abrasive wear on the cutting edge, increasing the service life of the insert and improving process stability for cast iron applications. Which geometry benefits contribute to edge life? The parallelogram 85° shape and 15° clearance combine to provide a stable cutting edge and favourable engagement angles, which reduce the risk of chipping under interrupted or heavy cuts. What chip behaviour can be expected with chipbreaker D56? Chipbreaker D56 creates short, controlled chips when machining brittle cast materials, improving evacuation and reducing the likelihood of chip entanglement or workpiece scratching. Is this insert compatible with standard indexable milling toolholders? The insert follows common indexable insert conventions (size 16, thickness 06, parallelogram form) and can be used in compatible Walter Tools or other ISO-compliant toolholders designed for parallelogram inserts. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation or endorsement by the manufacturer. The offered article is original, factory-new merchandise of the named brand.
ADGT1606PER-D56 WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WKP25S carbide grade combined with the D56 chipbreaker for reliable chip control and extended tool life; order directly through Metav Werkzeuge or request guidance from our consultants for an optimal tooling setup. ADGT1606PER-D56 WKP25S Fräswendeschneidplatte — Walter Tools, Tiger‑tec Silver, for steel and cast iron ADGT1606PER-D56 WKP25S is an indexable milling insert designed for robust, high‑productivity machining of steel and cast iron components. Tiger‑tec Silver coating extends tool life Coated carbide grade WKP25S for steel and cast iron Parallelogram 85° shape for precise edge positioning 15° relief angle optimises chip evacuation Stable chip control for uninterrupted production The combination of the D56 chipbreaker and the WKP25S grade delivers consistent chip formation under varying cutting conditions, which directly increases process reliability and reduces downtime. Designed within the Tiger‑tec Silver series, the insert offers a coated carbide structure that resists abrasive wear typical of cast materials and copes with the heat generation encountered when machining different steel grades. As a result, tool changes become less frequent and cycle times remain predictable, supporting a measurable improvement in machining economy. Accurate geometry and surface quality for repeatable parts The parallelogram 85° form and the 15° relief angle ensure stable seating in the cutter and favourable cutting engagement, which contributes to tighter dimensional tolerances and improved surface finish. The geometry supports stable cutting edges and predictable wear patterns, so the insert maintains cutting performance across its service life. For production runs where repeatability is essential, the insert’s design reduces rework and inspection effort while helping to secure consistent part quality. Practical handling and application benefits Indexable design with a standard 16 size and 06 thickness enables quick replacement and straightforward stock management in an industrial environment. The insert is tailored to ISO groups P and K, meaning it is suitable for a broad range of steel and cast iron applications; this versatility reduces the need for multiple specialised grades on the shop floor. Combined with the robust coating and chipbreaker, the geometry supports both medium and heavy cutting strategies, enhancing overall throughput while maintaining surface integrity. For technical consultation, application recommendations or to request samples of this insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930; our specialists assist with selection and process data to ensure optimal results. Technical data SKU: ADGT1606PER-D56-WKP25S-WALTER Article designation: ADGT1606PER-D56 WKP25S Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Core dimensions Insert size: 16 Thickness: 06 Relief angle: 15° Shape: Parallelogram 85° Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: D56 Material suitability: steel (P) and cast iron (K) Execution: T Designation without grade: ADGT1606PER-D56 FAQ Which materials is this insert suited for? The ADGT1606PER‑D56 WKP25S insert from Walter Tools is specified for ISO groups P and K, making it suitable for a range of steel and cast iron machining tasks. What are the benefits of the WKP25S grade? WKP25S, part of the Tiger‑tec Silver family, is a coated carbide grade that improves wear resistance and heat management, supporting longer tool life and stable cutting performance on both steel and cast iron. How does the D56 chipbreaker influence machining? The D56 chipbreaker promotes controlled chip segmentation and evacuation, reducing the risk of built‑up edge and ensuring reliable chip flow in medium to heavy cutting conditions with this insert. What cutter geometry is recommended for best results? A cutter accepting a parallelogram 85° insert with a 16 size pocket and correct seat for an insert thickness of 06 is recommended to retain the designed cutting angles and to achieve consistent edge engagement. Is the 15° relief angle important for application? Yes — the 15° relief angle contributes to favourable cutting mechanics and helps with chip escape, which supports improved surface finish and reduced cutting forces in the intended material groups. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered item is original, factory‑new merchandise from the manufacturer.
ADGT1606PER-D56 WKP35G Wendeplatten - Walter Tools
High-performance Tiger·tec Gold coating and the WKP35G grade provide extended tool life and consistent edge stability; the parallelogram 85° form with a 15° relief angle ensures reliable engagement and repeatable results. Order the ADGT1606PER-D56 WKP35G directly via Metav Werkzeuge or contact our consultants for tailored application advice. ADGT1606PER-D56 WKP35G milling insert (Tiger·tec Gold) for steel and cast iron — Walter Tools The ADGT1606PER-D56 WKP35G is a Tiger·tec Gold coated milling insert engineered for efficient general milling of steel and cast iron, combining robust wear resistance with dependable chip control. Tiger·tec Gold coated for enhanced wear resistance WKP35G grade: coated carbide performance Parallelogram 85° form for secure clamping 15° relief angle for versatile engagement Increased productivity through a high-performance coating The Tiger·tec Gold coating on this milling insert is designed to reduce friction and resist abrasive wear under elevated cutting temperatures, which leads to longer edge life and fewer tool changes. By using a coated carbide grade optimised for dynamic loads, machining cycles can be run at higher cutting speeds while maintaining surface quality. This results in measurable cycle-time savings and improved process stability during series production. Consistent chip control and secure seating for safer machining The integrated D56 chipbreaker is developed to manage typical chip forms encountered in steel and cast iron turning and milling. Controlled chip formation reduces the risk of entanglement and improves evacuation, which in turn minimises interruptions and enhances operator safety. Combined with the parallelogram 85° geometry, the insert provides stable seat location and repeatable orientation in the cutter body, reducing setup variability and ensuring consistent part quality. Broad material capability with ISO-based classification The grade supports machining in the ISO groups P and K — meaning suitability for steel (P) and cast iron (K). These classifications indicate that the insert has been formulated to handle the heat generation and chip behaviour typical of steels, as well as the abrasive tendencies and fragmented chips of cast-iron materials. For users less familiar with ISO groupings: P = steel, K = cast iron, giving a clear indication of material compatibility for workshop planning. Geometry and dimensions engineered for practical application With an insert size of 16 and a plate thickness of 06, this component is aimed at common milling setups where a balance of stiffness and precision is required. The 15° relief angle supports a favourable cutting geometry that reduces cutting forces in many milling operations, while the tolerance class G ensures manufactured precision for interchangeable seating. These attributes simplify tool selection and help maintain steady machining performance across batches. Discuss machining parameters and application suitability with Metav Werkzeuge to select the optimal Tiger·tec Gold WKP35G insert for high-productivity steel and cast iron milling Technical data Article number: ADGT1606PER-D56-WKP35G-WALTER Designation: ADGT1606PER-D56 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Facts Insert size: 16 Thickness: 06 Relief angle: 15° Parallelogram form angle: 85° Tolerance class: G Special features Coated carbide (Tiger·tec Gold) Chipbreaker: D56 Applicable for steel (P) and cast iron (K) Execution: T FAQ What materials is this insert suitable for? The ADGT1606PER-D56 WKP35G insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WKP35G grade improves wear resistance and thermal stability, enabling longer edge life and higher cutting speeds with stable surface finish. Which chipbreaker is fitted and why does it matter? This insert uses the D56 chipbreaker, which is designed to produce compact, controllable chips in both steel and cast iron, reducing machine downtime and improving safety. Is the insert geometry compatible with standard milling cutters? The parallelogram 85° form and 15° relief angle provide a common seating and approach angle suitable for many cutter bodies; the tolerance class G supports consistent fit and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
ADGT1606PER-D56 WKP35S Wendeplatten - Walter Tools
The combination of high process reliability, broad material compatibility and the Tiger·tec Silver coating ensures consistent productivity and long tool life; benefit from precise chip control and straightforward indexability. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific parameters. ADGT1606PER-D56 WKP35S milling insert — Tiger·tec Silver, for steel & cast iron | Walter Tools The ADGT1606PER-D56 WKP35S is a precision milling insert designed for productive machining of steel and cast iron, offering a robust grade and geometry for demanding milling operations. Tiger·tec Silver coating technology Grade WKP35S for steel and cast iron Parallelogram 85° shape for versatile milling D56 chipbreaker for stable chip control Higher productivity through coating and grade optimisation The combination of the Tiger·tec Silver coating and the WKP35S grade delivers a balance of wear resistance and toughness that is tuned for machining both steel (P) and cast iron (K). The coated-carbide construction reduces flank and crater wear in continuous and interrupted cuts, which translates into fewer indexings and longer productive tool life. This optimisation supports higher material removal rates while maintaining dimensional consistency, making the insert suitable for medium to heavy milling where process stability is a priority. The design emphasises efficient heat management and controlled wear progression, contributing to predictable tool performance. Geometry that supports consistent surface quality and reliable seating The parallelogram 85° form and the 15° clearance angle combine to offer a favourable cutting orientation for shoulder and face milling tasks. These geometric choices reduce cutting forces in certain tool paths and improve approach angles, which assists in achieving stable engagement and consistent surface finish. The D56 chipbreaker is tuned for reliable chip formation in the intended material groups, reducing the risk of built-up edge and facilitating evacuation. Tight tolerance class G and a plate thickness of 06 provide repeatable clamping and positional accuracy in standard toolholders, helping to preserve component tolerances and minimise rework. Broad applicability and machining recommendations Specifically produced for machining steels and cast irons, the insert’s specification (ADGT1606PER-D56 WKP35S) supports a range of milling operations where a robust coated grade is required. The insert is particularly effective in operations that encounter varying chip formation, as the chipbreaker and coated-carbide grade act together to manage abrasive wear and short, breaking chips typical of cast materials. For indexable tooling systems using parallelogram inserts, the plate offers predictable behaviour under moderate to heavy cutting conditions. Selection of cutting parameters should align with the workpiece material group designation (P or K) and the chosen grade’s capabilities to achieve the intended balance of life and machining economy. Contact Metav Werkzeuge to specify cutting parameters and secure availability of Walter Tools Tiger·tec Silver inserts for production optimisation Technical Data Article number: ADGT1606PER-D56-WKP35S-WALTER Product: Milling insert (Fräswendeschneidplatte) Manufacturer: Walter Tools ISO designation: ADGT1606PER-D56 WKP35S Facts Free angle: 15° Shape: Parallelogram 85° Plate size: 16 Thickness: 06 Tolerance class: G Special features Series: Tiger·tec Silver Grade: WKP35S Suitable for: Steel (P) and cast iron (K) Chipbreaker: D56 Execution: T Coated carbide, optimised for chip control FAQ What materials is this insert designed for? The ADGT1606PER-D56 WKP35S insert by Walter Tools is designed primarily for steel (P) and cast iron (K) applications, utilising the WKP35S grade for balanced wear resistance. How does the D56 chipbreaker improve machining? The D56 chipbreaker on this insert promotes controlled chip formation and evacuation, which helps maintain surface finish and reduces the likelihood of built-up edge when machining steels and cast irons. Which insert geometry ensures accurate positioning? The parallelogram 85° geometry combined with a 15° clearance angle provides stable seating and predictable cutting engagement, aiding repeatable positioning in indexable tool systems. Is this insert suitable for interrupted cuts? Yes, the coated-carbide grade and the insert’s geometry make it suitable for a range of cutting conditions, including operations with intermittent engagement, where toughness and wear resistance are both required. What series and grade does this insert belong to? The insert belongs to the Tiger·tec Silver series and uses the WKP35S grade, which is optimised for productive machining of steel and cast iron. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is an original factory-new product of the manufacturer.
ADGT1606PER-D56 WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WSP45G grade delivers extended tool life and consistent chip control via the D56 breaker, enabling productive milling of Stahl, rostfreier Stahl and heat‑resistant alloys; order directly via Metav Werkzeuge or consult their specialists if required. ADGT1606PER-D56 WSP45G milling insert – Tiger·tec Gold, Walter Tools The ADGT1606PER-D56 WSP45G is a parallelogram‑form milling insert engineered for versatile face and profile milling across a broad range of industrial alloys. Tiger·tec Gold PVD coating increases wear resistance Compatible with Stahl, rostfreier Stahl and Superalloys Parallelogram 85° form with 15° clearance D56 chipbreaker for secure chip control Reliable machining of difficult materials The combination of the WSP45G grade and Tiger·tec Gold coating targets the thermal and mechanical demands of modern milling. Designed for materials classified under P/M/S, this insert balances edge stability and toughness so machining of Stahl and rostfreier Stahl proceeds with reduced risk of build‑up and premature flank wear. The result is repeatable tool life and fewer unexpected insert changes, which supports stable production runs and predictable cycle times. Precision geometry for consistent results The Parallelogram 85° form and 15° clearance provide a geometry that enhances accessibility in shoulder and profile operations while maintaining a secure cutting angle. The insert thickness and form give reliable seating in compatible cutters, reducing vibration and improving surface finish. When used with appropriate cutting data, this geometry helps to convert higher spindle speeds into efficient material removal with controlled cutting forces. Coating and chip control for productivity A PVD coating technology under the Tiger·tec Gold name adds a wear‑resistant surface suited to intermittent and continuous cuts. Paired with the D56 chipbreaker, the system manages chip formation across variable feeds and depths, reducing the incidence of tangled chips and workpiece damage. This controlled chip behaviour shortens non‑productive time for machine and operator interventions and supports safer, more efficient milling cycles. Application focus and operational benefit Intended for general milling tasks across diverse alloy groups, the insert supports both roughing and finishing when selected with matching cutter bodies and machining parameters. The robust WSP45G composition lends itself to a wide spectrum of industrial use, from general structural components in Stahl to more demanding conditions in rostfreier Stahl and heat‑resistant materials. The balance of toughness and wear resistance can contribute to lower tool inventory and improved uptime in series production. Contact Metav Werkzeuge by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com to discuss Walter Tools Tiger·tec Gold inserts, application recommendations, and availability Technical data SKU: ADGT1606PER-D56-WSP45G-WALTER Article: ADGT1606PER-D56 WSP45G Type: Fräswendeschneidplatte (milling insert) Brand: Walter Tools Series: Tiger‑tec Gold Core dimensions Insert size: 16 mm Thickness: 06 Relief angle: 15° Insert form angle: 85° (parallelogram) Special features Grade: WSP45G Coating: Tiger·tec Gold (PVD) Chipbreaker: D56 Applicable material groups: P / M / S Tolerance class: G Version: T FAQ What materials is the insert suited for? The ADGT1606PER‑D56 WSP45G insert is specified for machining Stahl, rostfreier Stahl and Superalloys (group P/M/S), reflecting the design focus of the WSP45G grade. How does the D56 chipbreaker influence machining? The D56 chipbreaker on this Walter Tools insert promotes predictable chip formation and evacuation, reducing the likelihood of chip entanglement and improving process stability. Is the parallelogram form suitable for shoulder milling? Yes, the parallelogram 85° geometry combined with 15° clearance supports shoulder and profile milling while maintaining reliable cutting engagement. What advantages does Tiger·tec Gold coating provide? Tiger·tec Gold (PVD) coating enhances wear resistance and edge life under thermal load, which helps to extend service intervals for the WSP45G‑grade inserts. Which cutter bodies are compatible with the ADGT1606PER‑D56 specification? Cutter bodies that accept ADGT‑style parallelogram inserts with a 16 mm size and the matching seat geometry will be compatible; correct clamping and seat condition are essential for achieving the insert’s performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is an original factory‑new product of the manufacturer.
ADGT1606PER-D67 WKP35G Wendeplatten - Walter Tools
Benefit from long tool life and consistent chip control thanks to the Tiger·tec Gold grade and the D67 chipbreaker, which together support productive machining cycles. Order the ADGT1606PER-D67 WKP35G milling insert directly via Metav Werkzeuge or ask our consultants if needed. ADGT1606PER-D67 WKP35G milling insert — Walter Tools, Tiger·tec Gold, 15° free angle The ADGT1606PER-D67 WKP35G is a parallelogram milling insert designed for precision machining of steel and cast iron in demanding manufacturing environments. Tiger·tec Gold coating for extended life Optimised chipbreaker D67 for reliable chips Parallelogram 85° geometry for stable cutting Suitable for steel and cast iron machining High productivity through engineered grade and geometry The Tiger·tec Gold coating combined with the WKP35G grade delivers high abrasion resistance and consistent performance when machining steel and cast iron. The insert’s parallelogram 85° geometry and the D67 chipbreaker are engineered to stabilise chip formation and reduce vibration, resulting in measurable improvements in cycle times and tool life. These technical choices translate into fewer tool changes and more uninterrupted production — a clear efficiency gain for series manufacturing and job-shop operations. Reliable chip control for secure process windows With a dedicated chipbreaker profile, the insert provides dependable chip evacuation even under interrupted cuts commonly encountered in cast iron work. The combination of shape and breaker design ensures predictable chips and reduced re-cutting of swarf, which improves surface integrity and lowers the risk of workpiece damage. The 15° free angle supports secure edge engagement, helping to maintain process stability across batch runs while providing a balance between cutting force and edge strength. Coating and substrate tuned for demanding materials The coated carbide substrate of the WKP35G grade is optimised for the thermal and mechanical loads typical of steel machining. The Tiger·tec Gold layer enhances wear resistance and supports higher cutting parameters where machine and fixture rigidity allow. The result is a robust cutting edge that maintains dimensional accuracy over extended tool life, supporting tight tolerances and a consistent surface finish — an advantage for precision components where repeatability matters. Practical integration and handling benefits Designed in a common industry geometry, the insert fits milling tool bodies that accept the ADGT-style family and benefits from straightforward indexing and secure clamping. Size code 16 and thickness code 06 provide a stable contact surface and edge strength for medium to heavy milling tasks. The T execution and G tolerance class ensure dimensional conformity for reliable replacement and minimal set-up time, aiding quick tool changes and consistent baseline performance on the shop floor. Contact Metav Werkzeuge for tailored application advice on the Walter Tools ADGT1606PER-D67 WKP35G insert and to check current availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ADGT1606PER-D67-WKP35G-WALTER Label: Fräswendeschneidplatte ADGT1606PER-D67 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WKP35G Execution: T Tolerance class: G Facts Free angle: 15° Plate form: Parallelogramm 85° Plate size: 16 Plate thickness: 06 Chipbreaker: D67 Special features Coated carbide grade (WKP35G) Tiger·tec Gold coating technology Suitable for steel and cast iron (ISO P and K) Parallelogram geometry for increased stability Optimised chip control for interrupted cuts Designed for productive milling applications FAQ What materials is this insert suitable for? The ADGT1606PER-D67 WKP35G insert from Walter Tools is specified for steel and cast iron machining according to its Tiger·tec Gold grade and ISO material grouping P and K. How does the D67 chipbreaker affect machining? The D67 chipbreaker on the ADGT1606PER-D67 WKP35G promotes predictable chip formation and efficient evacuation, reducing re-cutting of swarf and improving surface quality in milling operations. Can the insert withstand continuous high-speed machining? The Tiger·tec Gold coating and the WKP35G substrate are engineered for elevated process security and abrasion resistance, supporting sustained machining when machine rigidity and cooling are appropriate. Which tool geometries are compatible with ADGT-style inserts? The ADGT1606PER-D67 WKP35G fits milling cutters designed for ADGT-format parallelogram inserts and benefits from secure clamping and straightforward indexing for repeatable set-ups. What are the key benefits of choosing this Walter Tools insert? Selecting the ADGT1606PER-D67 WKP35G provides a combination of coating performance, robust chip control, and geometry that enhances stability — all contributing to longer tool life and more consistent production results. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used here for descriptive purposes only and do not imply any affiliation or endorsement by the trademark owners. The offered item is an original, factory-new product of the named manufacturer.
ADGT1606PER-D67 WKP35S Wendeplatten - Walter Tools
Take advantage of the proven combination of high process security and broad material capability for dependable, productive milling. The insert’s Tiger·tec Silver technology and WKP35S grade deliver stable chip formation and good wear resistance, making it an economical choice for mixed production of steel and cast iron — order via Metav Werkzeuge or consult their specialists for application advice. ADGT1606PER-D67 WKP35S — Indexable milling insert, Tiger·tec Silver, for steel and cast iron (Walter Tools) A durable indexable milling insert, ADGT1606PER-D67 WKP35S, designed for productive milling in steel and cast iron with a parallelogram geometry and advanced coating technology Tiger·tec Silver coating technology Suited for steel (P) and cast iron (K) Parallelogram 85° insert form D67 chipformer for controlled chip formation Performance gains from coating and grade The combination of Tiger·tec Silver coating with the WKP35S grade yields a reliable balance of wear resistance and edge stability for demanding milling tasks. The coated carbide substrate is engineered to tolerate the thermal and mechanical loads typical when machining steel and cast iron, reducing flank wear and maintaining consistent cutting edge geometry over longer tool life. As a result, cycle time variations are minimised and tool change intervals are extended, supporting stable production rhythms and lower unit costs. Geometry and chip control for predictable machining With a parallelogram 85° form and a 15° clearance, the insert provides a robust cutting edge and controlled engagement with the workpiece, improving tool life under interrupted cuts often encountered in milling. The D67 chipformer promotes short, fragmenting chips when cutting cast materials and manageable chip forms in steels, aiding process reliability and reducing the risk of chip-related downtime. The insert’s insert size 16 and thickness 06 give a compact but sturdy geometry suitable for a wide range of milling cutters and pocket depths. Application scope and practical advantages Designed primarily for materials classified as P and K according to ISO 513, this insert is particularly effective where mixed batches of steel and cast iron must be machined with consistent surface quality. The grade is aligned to the Tiger·tec Silver family, offering modern coating performance for improved heat and abrasion resistance. For toolroom and production environments that demand repeatable results, the geometry and grade combination supports high process security and predictable tool behaviour, enabling more confident process parameter selection and easier integration into production cycles. For specific cutting data, toolholder compatibility or application recommendations, contact Metav Werkzeuge for tailored advice and fast supply of genuine Walter Tools products. Technical data Article number: ADGT1606PER-D67-WKP35S-WALTER Designation: ADGT1606PER-D67 WKP35S Manufacturer: Walter Tools Facts Insert size: 16 Thickness: 06 Clearance angle: 15° Tolerance class: G Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipformer: D67 Insert form: Parallelogram 85° Material suitability: P / K (steel and cast iron) FAQ What materials is this insert suitable for? The ADGT1606PER-D67 WKP35S insert is specified for materials in groups P and K, meaning it is suited for steel and cast iron applications. What benefits does the Tiger·tec Silver technology provide? Tiger·tec Silver coating on the WKP35S grade enhances thermal and abrasive resistance, improving edge life and process reliability when milling steels and cast irons. How does the D67 chipformer influence machining? The D67 chipformer is designed to produce controlled chip forms, reducing chip entanglement and improving surface finish consistency during milling operations with the ADGT1606PER-D67 insert. Is this insert compatible with standard parallelogram pockets? The parallelogram 85° form and the stated dimensions make the insert compatible with toolholders designed for ADGT-style parallelogram inserts; confirm pocket dimensions with tooling documentation. Can the insert be used for interrupted cuts? Yes, the insert’s geometry and coated carbide grade provide edge robustness suitable for interrupted milling, improving resistance to chipping under impact loads. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT1606PER-D67 WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a stable chipformer and a precision parallelogram geometry for reliable machining of demanding alloys; order the ADGT1606PER-D67 WSM35G insert directly via Metav Werkzeuge or consult the team for application advice. ADGT1606PER-D67 WSM35G indexable milling insert, Tiger·tec Gold, Walter Tools ADGT1606PER-D67 WSM35G is an indexable milling insert designed for heavy-duty cutting of heat-resistant alloys and rostfreier Stahl, offering a coated-carbide grade and a geometry tuned for stable chip control. Tiger·tec Gold coating for thermal stability Parallelogram 85° insert form for robust cutting D67 chipformer for consistent chip evacuation Stable processing of rostfreier Stahl and superalloys for longer tool life The WSM35G grade, built on Tiger·tec Gold coating technology, is optimised for machining rostfreier Stahl and high-temperature superalloys. The coated-carbide construction improves heat resistance and reduces edge wear, which translates into fewer tool changes and steadier production runs. For shop floors facing built-up edge and thermal load, this grade supports a more predictable component quality and longer service intervals. Geometry that enhances surface finish and chip control The Parallelogram 85° form combined with the D67 chipformer and a 15° clearance produces a favourable cutting kinematics: radial engagement and chip flow are controlled to lower cutting forces and reduce vibrations. The insert’s size and thickness coding ensure a rigid seat in the cutter body, making the system suitable for demanding interrupted cuts and shoulder milling where consistent surface quality and repeatability matter. Process reliability and economical machining through a robust design With coated carbide performance and tolerance class G, the insert supports repeatable positioning and stable cutting edges under elevated thermal and mechanical loads. The material classification S / M indicates suitability for both titanium/superalloy work and rostfreier Stahl, helping to rationalise tooling across mixed-material production. The overall result is higher uptime, fewer reworks and improved cost per component in serial and job-shop environments. Contact Metav Werkzeuge for a tailored recommendation on the ADGT1606PER-D67 WSM35G insert and to arrange product delivery or technical consultation. Technical Data Article number: ADGT1606PER-D67-WSM35G-WALTER Name: ADGT1606PER-D67 WSM35G Manufacturer: Walter Tools Core specifications Insert size: 16 Thickness code: 06 Free angle: 15° Form: Parallelogram 85° Chipformer: D67 Tolerance class: G Special features Series: Tiger·tec Gold Grade: WSM35G (coated carbide) Material suitability: S / M (superalloys / rostfreier Stahl) Execution: T FAQ What materials is this insert intended to machine? The ADGT1606PER-D67 WSM35G is specified for machining rostfreier Stahl and heat-resistant superalloys (S / M classification), offering the thermal and edge stability required for these groups. How does the D67 chipformer benefit the machining process? The D67 chipformer is designed to produce short, controllable chips and support consistent chip evacuation, improving surface finish and reducing the risk of built-up edge when machining with the WSM35G grade. What is the significance of the Parallelogram 85° form? The Parallelogram 85° geometry provides robust cutting support and favourable load distribution on the cutting edge, which helps maintain repeatable performance during heavy or interrupted milling operations. Which coating technology is used and what does it deliver? The insert uses Tiger·tec Gold coating technology, delivering enhanced heat resistance and edge stability to extend tool life when processing demanding materials. What does tolerance class G mean for production? Tolerance class G indicates precise manufacturing tolerances of the insert, facilitating consistent seating and reliable interchangeability in precision milling holders. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADGT1606PER-D67 WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and WSP45G grade for durable, versatile milling with controlled chip formation; the parallelogram 85° geometry combined with a 15° clearance supports flexible toolpaths and prolonged edge life. Order the ADGT1606PER-D67 WSP45G directly via Metav Werkzeuge or ask our consultants for application-specific recommendations. ADGT1606PER-D67 WSP45G milling indexable insert by Walter Tools — Tiger·tec Gold PVD grade for versatile milling ADGT1606PER-D67 WSP45G is a milling indexable insert optimised for medium to demanding milling tasks across a broad range of materials Tiger·tec Gold coating for wear resistance Suitable for Steel, stainless steel, Superalloys Parallelogram 85° geometry for flexible milling Longer tool life through a versatile PVD grade The WSP45G grade in the Tiger·tec Gold series combines a coated carbide substrate with a PVD top layer to deliver wear resistance and stable cutting performance. This engineered combination reduces flank wear and supports consistent edge integrity during extended runs, which in turn lowers tool change frequency and contributes to higher overall productivity. The grade is specifically balanced for the heat and strain typical of milling, making it a reliable choice for general production and mixed-shop environments. Predictable chip behaviour and surface quality Equipped with the D67 chipbreaker and a parallelogram 85° geometry, the insert enables controlled chip formation and improved evacuation in a wide range of cutting conditions. The chipbreaker design aids in breaking and directing chips away from the cut, reducing the risk of re-cutting and improving surface finish. The 15° clearance provides a favourable approach angle that helps reduce friction at the cutting edge, benefitting surface integrity and dimensional consistency on workpieces. Broad material capability for fewer tool variants Designed for application across the ISO groups P/M/S, the insert handles unalloyed and alloyed steel, stainless steel, as well as heat-resistant superalloys and titanium. This breadth of capability allows consolidation of tool inventories: one insert type can serve multiple workpiece materials, simplifying tool management and setup. The robust PVD coating and substrate pairing support machining where heat build-up and edge stress are significant, delivering repeatable performance in both semi-finishing and finishing operations. Stable geometry and tolerance for reliable mounting The parallelogram form with an 85° seat angle provides flexibility in toolholder configurations and facilitates a variety of entry angles without sacrificing clamping stability. The insert is supplied in the specified tolerance class G and a standard thickness that ensures repeatable seating and concentricity in tool bodies. These dimensional consistencies are essential for high-volume production where interchangeability and repeatable setup reduce scrap and rework. Practical advantages for production environments By combining a resilient coating system, a versatile grade and a proven chipformer, this insert supports longer tool life, fewer interruptions and consistent component quality. Shops aiming to increase machine uptime or to streamline tooling strategies will find the balance of wear resistance and chip control particularly useful. For specific cutting data recommendations or to confirm suitability for a given machine and operation, technical consultation is available to match speeds, feeds and depth of cut to the intended application. Discuss the Walter Tools ADGT1606PER-D67 WSP45G with Metav Werkzeuge for tailored cutting-data suggestions and grade selection; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADGT1606PER-D67-WSP45G-WALTER Manufacturer: Walter Tools Product type: milling indexable insert Designation: ADGT1606PER-D67 WSP45G Series: Tiger·tec Gold Facts Size: 16 Thickness: 06 Free angle: 15° Geometry: Parallelogram 85° Tolerance class: G Materials & features Coating: Tiger·tec Gold (PVD) Grade: WSP45G (coated carbide) Chipbreaker: D67 Suitable for: Steel (P), stainless steel (M), Superalloys/Titanium (S) Execution: T Wendeplatte ISO: ADGT1606PER-D67 WSP45G FAQ What materials can this insert machine effectively? The ADGT1606PER-D67 WSP45G from Walter Tools is intended for machining Steel, stainless steel and heat-resistant superalloys (ISO groups P, M, S) and is optimised to manage the typical heat and chip formation of those materials. How does the parallelogram geometry influence milling results? The parallelogram 85° configuration improves toolholder flexibility and entry-angle options, helping the ADGT1606PER-D67 WSP45G maintain stable cutting forces and improved vibration damping for better surface finish. Which chipbreaker is fitted and what is its benefit? This insert features the D67 chipbreaker, designed to produce manageable chips under a variety of cutting conditions, enhancing chip evacuation and reducing the chance of re-cutting or surface damage. Why choose Tiger·tec Gold for milling applications? The Tiger·tec Gold coating on the WSP45G grade enhances edge stability and wear resistance, which extends tool life and sustains cutting performance across mixed production demands. Is this insert suitable for both roughing and finishing? Yes; the combination of grade, chipbreaker and geometry makes the ADGT1606PER-D67 WSP45G adaptable for medium roughing and finishing strategies when cutting parameters are selected appropriately. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADGT1606PER-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of robust cutting-edge stability and secure chip control for predictable milling of stainless steels and superalloys; order directly via Metav Werkzeuge or request tailored advice from the technical team. ADGT1606PER-F56 WSM35G milling indexable insert — 15° relief, Parallelogram 85° (Walter Tools) The ADGT1606PER-F56 WSM35G is a coated cemented-carbide milling insert designed for heavy-duty machining of stainless steels and heat‑resistant superalloys, offering a balance of edge stability and chip control in interrupted and continuous milling operations. Tiger·tec Gold coated carbide grade WSM35G Optimised for stainless steels and superalloys Parallelogram 85° geometry with 15° relief F56 chipbreaker for controlled chip formation Consistent performance on difficult-to-machine materials The combination of the Tiger·tec Gold coating and the WSM35G grade delivers a material system engineered for the thermal and mechanical demands of stainless steels and heat‑resistant superalloys. The coated cemented‑carbide formulation promotes stable cutting edges, which reduces the tendency for built‑up edge and extends productive tool life. For process planners, this translates into fewer interruptions and a steadier manufacturing output when tackling tough alloys that typically cause rapid wear. Geometry that improves process security and surface quality The parallelogram 85° shape together with a 15° relief angle creates an advantageous cutting orientation for face and shoulder milling where radial engagement varies. The F56 chipbreaker has been developed to generate manageable chips and to avoid entanglement, supporting consistent surface finish and reducing the risk of tool chipping. With tolerance class G, dimensional repeatability is supported, making tool indexing and re‑clamping more predictable in serial production. Practical applications and who benefits This insert is intended for use in high‑duty milling operations in sectors such as aerospace, energy and specialised engineering where stainless steels and superalloys are common. Job shops and production facilities requiring reliable edge life and repeatable results will benefit from the grade’s emphasis on thermal resistance and stable chip formation. Operators and process engineers will find that the insert’s characteristics help to maintain cycle times and reduce scrap from poor chip control. Economic and operational advantages By prioritising edge stability and chip control, the insert supports higher productivity through reduced downtime for tool changes and less variability in part quality. The combination of a coated hard‑metal grade and a purpose‑built chipbreaker contributes to longer intervals between indexings and more predictable tool costs per machined component. The result is improved process security and a clearer calculation of total machining cost for demanding materials. Contact Metav Werkzeuge for application advice and procurement of Walter Tools inserts such as ADGT1606PER-F56 WSM35G, and request recommendations tailored to the specific machining task Technical Data SKU: ADGT1606PER-F56-WSM35G-WALTER Item designation: ADGT1606PER-F56 Brand: Walter Tools Product type: Fräswendeschneidplatte / milling indexable insert Series: Tiger·tec Gold Facts Insert size: 16 Thickness: 06 Relief angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: G Special features Grade: WSM35G Coating technology: Tiger·tec Gold Material suitability: S / M (heat‑resistant superalloys, titanium; stainless steels) Execution: T FAQ What materials is the ADGT1606PER-F56 WSM35G suited for? The ADGT1606PER-F56 WSM35G is formulated for stainless steels and heat‑resistant superalloys (ISO groups M and S), providing thermal stability and reliable chip formation when machining these difficult materials. Which geometry and relief does the insert provide? This insert features a parallelogram 85° plate form with a 15° relief angle, designed to offer favourable cutting engagement and improved tool life under varying radial depths of cut. How does the F56 chipbreaker benefit the machining process? The F56 chipbreaker facilitates controlled chip fragmentation and evacuation, reducing the likelihood of entanglement and enabling a more consistent surface finish and extended tool life during milling. Is this insert compatible with common milling toolholders? The ISO designation ADGT1606PER-F56 indicates standard insert geometry; the ADGT1606PER-F56 WSM35G can be used in compatible milling cutter bodies that accept this insert shape and size, observing the specified tolerance class G. For which industries is this insert particularly suitable? The combination of the WSM35G grade and the Tiger·tec Gold coating makes this insert well suited to aerospace, power generation and specialised engineering sectors where stainless steels and superalloys are frequently machined. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanatory purposes only and do not imply any affiliation with or endorsement by the respective trademark holders. The offered item is an original, factory‑new product of the manufacturer.
ADGT1606PER-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from a combination of Tiger‑tec Gold PVD coating, stable parallelogram geometry and a 15° relief angle for consistent, high‑productivity milling of steel, stainless steel and high‑temperature alloys; order or request application advice via Metav Werkzeuge for optimal integration into existing processes. ADGT1606PER-F56 WSP45G milling indexable insert — Tiger‑tec Gold, 15° relief, parallelogram 85° (Walter Tools) The ADGT1606PER-F56 WSP45G is a PVD‑coated milling indexable insert designed for robust face and profile milling across steels, stainless steels and heat‑resistant superalloys, offering secure chip control and long edge life. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Parallelogram 85° geometry 15° relief for cutting stability Reliable performance across demanding materials The combination of the Tiger‑tec Gold coating and the grade WSP45G creates a balance of toughness and wear resistance that is particularly advantageous when machining steel, stainless steel and superalloys/titanium. The coated cemented‑carbide substrate is formulated to resist thermal and mechanical loads typical of milling operations; this means fewer unplanned tool changes and a more predictable process rhythm. For production environments where consistent component quality and repeatability are essential, this insert provides a clear improvement in tool life and process stability compared with uncoated or older coated grades. Geometry and edge stability for secure machining The parallelogram 85° form together with a 15° relief angle supports a positive cutting approach and reliable chip evacuation, especially during interrupted cuts and shoulder milling. The insert’s shape and chipbreaker specification F56 are engineered to reduce cutting forces and to direct chips away from the cutting zone, lowering the risk of edge build‑up. This geometry benefits machining cycles that require dimensional consistency and surface quality; the result is reduced rework and a smoother downstream process, which helps maintain throughput targets in a production setting. Tiger‑tec Gold coating and application benefits The Tiger‑tec Gold surface technology is a PVD coating system optimised for milling: it improves wear resistance while maintaining the toughness necessary for variable cutting conditions. As a result, the insert copes well with the heat generation and the complex chip forms encountered when cutting P/M/S material groups (unalloyed and alloyed steels, stainless steels and heat‑resistant superalloys). For engineers specifying tools, the benefit is twofold: enhanced process security through stable cutting edges and predictable tool behaviour under elevated temperatures, and improved surface finish on the workpiece due to controlled micro‑geometry at the cutting edge. Contact Metav Werkzeuge today to discuss how the ADGT1606PER-F56 WSP45G with Tiger‑tec Gold can improve milling productivity; eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Article number (SKU): ADGT1606PER-F56-WSP45G-WALTER Designation: ADGT1606PER-F56 ISO designation: ADGT1606PER-F56 WSP45G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Chipbreaker: F56 Material groups: P / M / S Numbers / core technical data Size: 16 Thickness: 06 Relief angle: 15° Plate form angle: Parallelogram 85° Tolerance class: G Designs / special features Tiger‑tec Gold PVD coating Coated cemented‑carbide insert Parallelogram 85° geometry Chipbreaker F56 for secure chip control Suited for steel, stainless steel and heat‑resistant superalloys FAQ What materials can be machined with this insert? The ADGT1606PER‑F56 WSP45G is suited to machining steels, stainless steels and heat‑resistant superalloys (P / M / S), thanks to its Tiger‑tec Gold coating and robust substrate design. Which milling applications benefit most from this geometry? Parallelogram 85° inserts with a 15° relief are especially effective for face milling and shoulder milling where chip control and edge stability during interrupted cuts are required. How does the Tiger‑tec Gold coating affect tool life? Tiger‑tec Gold provides improved wear resistance while maintaining edge toughness; this combination extends tool life and yields more consistent performance under elevated cutting temperatures. Is the chipbreaker F56 suitable for heavy cuts? The F56 specification delivers controlled chip formation for a broad range of cutting conditions, supporting stable machining in both roughing and semi‑finishing passes. Can this insert be used on titanium alloys? The product is classified for S‑group materials, which include heat‑resistant superalloys and titanium; machining parameters should be adjusted for low thermal conductivity materials to protect the cutting edge. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation. The offered item is an original, factory‑new product from the manufacturer.
ADGT1606PER-G77 WSM35G WSM35G Wendeplatten - Walter Tools
The combination of a Tiger·tec Gold grade (WSM35G), a 15° clearance angle and the G77 chipbreaker delivers high process stability and extended tool life for demanding materials; order the inserts directly via Metav Werkzeuge or consult the technical team for application-specific cutting data. ADGT1606PER-G77 WSM35G indexable milling insert — Tiger·tec Gold, parallelogram 85°, Walter Tools The ADGT1606PER-G77 WSM35G is an indexable milling insert designed for productive machining of stainless steels and heat‑resistant superalloys in industrial milling operations. Tiger·tec Gold coated WSM35G For stainless steels and superalloys Parallelogram 85° cutting geometry 15° clearance angle for secure chip control Reliable cutting performance in hard-to-machine materials The coated carbide grade WSM35G, part of the Tiger·tec Gold series, is engineered to handle the thermal and mechanical loads associated with machining stainless steels and superalloys. The coating improves oxidation and wear resistance while the substrate provides a stable cutting edge under cyclic load, which translates into predictable component quality and fewer tool changes. Thanks to the coating and the substrate combination, the insert maintains edge integrity at elevated temperatures and supports consistent chip formation, reducing the risk of built-up edge and unexpected rework. Geometry that promotes process stability and surface quality The parallelogram 85° outline together with the 15° clearance angle and the G77 chipbreaker create a balanced cutting geometry for both interrupted and continuous cuts. The insert form disperses cutting forces and reduces vibration potential, which benefits surface finish and dimensional repeatability. In practical terms, this geometry allows higher metal removal rates with controlled chip flow, helping to keep cycle times low while maintaining a stable machining process on components made from challenging materials. Economical productivity for serial production Adopting the WSM35G grade in a standard ADGT16 platform supports cost-effective machining through longer tool life and consistent performance. Fewer indexings and longer edge life reduce downtime and tooling expenditure per part without compromising tolerances. The combination of coating technology and dedicated chip control means predictable wear behaviour, which simplifies tool management and contributes to more reliable production planning in batch and continuous manufacturing environments. Practical guidance and fitment in milling systems The insert suits common ADGT16 holders and is available in the standard ADGT1606 thickness and form, enabling straightforward integration into existing toolsets. Selection of cutting parameters should consider the workpiece alloy group (ISO group M for stainless steels and S for heat‑resistant alloys and titanium), the chosen depth of cut and engagement; the G77 chipbreaker is particularly effective where secure chip segmentation and evacuation are required. For fine finishing, adapt speeds and feed to the workpiece grade to exploit the coating’s ability to sustain edge integrity while achieving the desired surface quality. Contact Metav Werkzeuge for tailored cutting data and to secure Walter Tools Tiger·tec Gold WSM35G inserts for demanding stainless and superalloy milling — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: ADGT1606PER-G77-WSM35G-WALTER Product: Indexable milling insert Manufacturer: Walter Tools ISO designation: ADGT1606PER-G77 WSM35G Facts Insert size: 16 Thickness designation: 06 Clearance angle: 15° Plate form: Parallelogram 85° Tolerance class: G Chipbreaker: G77 Special features Coating: Tiger·tec Gold (WSM35G) Substrate: Coated carbide Series: Tiger‑tec Gold Grade: WSM35G Version: T Base designation: ADGT1606PER-G77 Material application: stainless steels (ISO group M), superalloys and titanium (ISO group S) FAQ What materials is this insert intended for? The WSM35G grade is optimised for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering secure chip formation and thermal stability during milling. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold improves oxidation and abrasive wear resistance, extending edge life under high temperatures; the coating on the WSM35G grade supports consistent cutting performance in demanding materials. Which geometry features influence cutting behaviour? The parallelogram 85° outline and 15° clearance angle together with the G77 chipbreaker reduce cutting forces and promote stable chip control, which benefits surface finish and process reliability. Can the ADGT1606PER-G77 be used for both roughing and finishing? Depending on holder, cutter assembly and cutting data, the ADGT1606PER‑G77 WSM35G insert can be applied for roughing and, with adjusted parameters, for finishing in many stainless and superalloy applications. How does the G77 chipbreaker perform on interrupted cuts? The G77 chipbreaker is designed for secure chip control and performs well in interrupted and continuous milling where reliable chip formation and evacuation are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names mentioned above are the property of their respective owners. The brand names are cited for explanation and identification purposes only; there is no affiliation or partnership implied between Metav Werkzeuge and the trademark owners. The listed article is an original, factory‑new product from Walter Tools.
ADGT1606PER-G77 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of high edge stability and versatile material range for consistent milling performance; the PVD-backed Tiger·tec Gold grade WSP45G ensures long tool life and reliable chip control. Order the ADGT1606PER-G77 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. ADGT1606PER-G77 WSP45G indexable milling insert – Tiger·tec Gold, 15° clearance, Parallelogram 85° (Walter Tools) The ADGT1606PER-G77 WSP45G is an indexable milling insert engineered for medium to heavy milling in a wide spectrum of workpiece groups, offering a robust PVD coating and a geometry optimised for secure chip formation. Tiger·tec Gold PVD coating Grade WSP45G for tough milling Parallelogram 85° shape for versatility Suitable for Stahl, rostfrei and superalloys Consistent cutting performance across demanding materials The combination of the Tiger·tec Gold coating and the WSP45G grade ensures consistently high edge stability and predictable wear behaviour during milling operations. The PVD-backed, coated cemented carbide composition is designed to balance toughness and hardness, which reduces the tendency for premature chipping when machining challenging substrates. For workshops producing complex parts, this means fewer interruptions for insert changes and a steadier process window, leading to improved cycle-time reliability and lower total tool consumption. Geometry that improves process security and chip control The parallelogram shape with an 85° approach angle and a 15° clearance angle produces favourable cutting forces and controlled chip flow. The specific G77 chipbreaker supports stable chip formation across interrupted and continuous cuts, reducing the risk of built-up edge and helping to maintain surface finish. These geometric choices translate to more predictable tool behaviour in slotting and shoulder milling, where maintaining a steady cutting edge is essential for dimensional repeatability and part quality. Broad applicability and clear material guidance Marked for workpiece groups P / M / S, the insert is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys or Titan. The designation indicates the intended application range rather than the insert material itself and helps planners select the right grade for mixed-production environments. For operations that switch between alloyed steels, corrosion-resistant grades and high-temperature alloys, the insert provides a practical compromise: robust enough for heat-prone materials while retaining the toughness required for conventional steels. Practical benefits that support productivity The standardised size code and thickness simplify inventory management and regrinding decisions, while the coated surface reduces friction and thermal impact at the cutting edge. This results in longer effective tool life and fewer quality incidents caused by edge failure. The insert’s tolerance class G supports repeatable seating in indexable holders, contributing to consistent part geometry across tool changes and multi-shift operations. Contact Metav Werkzeuge today to discuss suitability of the ADGT1606PER-G77 WSP45G for specific applications or to request cutting data tailored to the process Technical Data Article number: ADGT1606PER-G77-WSP45G-WALTER Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Facts Clearance angle: 15° Shape: Parallelogramm 85° Size: 16 Thickness code: 06 Tolerance class: G Special features Material suitability: P / M / S Chipbreaker: G77 Execution: T Coating/technology: Tiger·tec Gold, PVD-coated cemented carbide FAQ What materials is this insert intended for? The ADGT1606PER-G77 WSP45G insert is specified for the workpiece groups P / M / S, which covers Stahl, rostfreier Stahl and high-temperature superalloys including Titan. Which chipbreaker does the insert use and why does that matter? This insert features the G77 chipbreaker; the design supports controlled chip formation and reduced built-up edge, improving surface quality during milling. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold PVD coating on the ADGT1606PER-G77 WSP45G enhances wear resistance and heat protection, extending tool life under medium to heavy milling loads. Is the insert compatible with standard indexable milling holders? The ADGT1606PER-G77 WSP45G follows common size and tolerance conventions (tolerance class G), ensuring repeatable seating in compatible indexable holders for milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original and brand new from the manufacturer (Walter Tools).
ADGT1807PER-D51 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, controlled chip formation and stable geometry to increase process reliability and reduce downtime; order the insert directly via Metav Werkzeuge or contact our consultants for matching toolholders and grade recommendations. ADGT1807PER-D51 WKP35G — Milling indexable insert (Parallelogram 85°, 15° free angle) by Walter Tools The ADGT1807PER-D51 WKP35G is a coated carbide milling insert engineered for productive machining of steel and cast iron in demanding milling operations. Tiger·tec Gold coating for high wear resistance Optimised D51 chipbreaker for consistent chips Parallelogram 85° geometry with 15° free angle Coated carbide grade WKP35G for steel and cast iron High productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G grade provides a robust, coated carbide solution that resists abrasive wear and thermal loading during interrupted and continuous milling. This design supports a stable cutting edge, promoting longer tool life and fewer tool changes. In practice, the coated structure is tailored to the heat and chip behaviour typical of steel and the abrasive nature of cast iron, making the insert a reliable choice where consistent removal rates and predictable tool performance matter. Geometry and chip control that stabilise the process The parallelogram 85° geometry and 15° free angle deliver a favourable cutting orientation that balances radial engagement and axial forces, improving toolholder life and surface finish stability. The D51 chipbreaker is engineered to produce short, controllable chips when machining P- and K-class materials, reducing the risk of entanglement and improving evacuation. Together these features support safer, more repeatable milling cycles and facilitate higher feed rates without compromising component quality. Practical application and economic impact Designed for use in steel (ISO group P) and cast iron (ISO group K), this insert suits a wide range of catalogue- and geometry-dependent milling tasks where abrasion resistance and edge stability are essential. By reducing wear-related downtime and enabling consistent cycle times, the insert contributes to a lower cost per manufactured part and improved plant throughput. For selection of the optimal grade, holder geometry or cutting data, Metav Werkzeuge can provide targeted recommendations to align the insert performance with specific machining strategies. Contact Metav Werkzeuge for availability and tailored cutting recommendations for the Walter Tools ADGT1807PER-D51 WKP35G milling insert — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data SKU: ADGT1807PER-D51-WKP35G-WALTER Article designation: ADGT1807PER-D51 WKP35G Product type: Milling indexable insert Manufacturer: Walter Tools Core data Free angle: 15° Insert size: 18 Plate thickness: 07 Geometry: Parallelogram 85° Tolerance class: G Chipbreaker: D51 Grade: WKP35G Special features Coating: Tiger·tec Gold Material: Coated carbide (P / K) Suitable for: Steel (P) and cast iron (K) Execution: T Series: Tiger-tec Gold FAQ What materials is this insert suitable for? The ADGT1807PER-D51 WKP35G is specified for machining steel (ISO group P) and cast iron (ISO group K), matching the design goals of the WKP35G grade. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating increases wear resistance and heat tolerance, helping the insert maintain a sharp cutting edge longer under the thermal and abrasive conditions of milling. Which chipbreaker is fitted and what is its benefit? The insert features a D51 chipbreaker that produces short, controllable chips, which supports safer chip evacuation and more consistent surface quality. Is the geometry suitable for heavy roughing and finishing? The parallelogram 85° geometry with a 15° free angle offers a balance between rigidity and cutting orientation, making the insert versatile for both roughing and finishing strategies depending on insert engagement and cutting data. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only; there is no affiliation between our company and the listed brands. The offered item is an original, brand-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADGT1807PER-D56 WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold PVD coating with the robust D56 chipbreaker and a 15° clearance, this insert delivers secure chip control and extended tool life for versatile milling of Stahl, rostfreier Stahl and Titan; order the ADGT1807PER-D56 WSP45G directly via Metav Werkzeuge or consult our specialists for cutting-data optimisation. ADGT1807PER-D56 WSP45G — Milling indexable insert (Tiger·tec Gold, Parallelogram 85°) by Walter Tools ADGT1807PER-D56 WSP45G is a coated carbide milling insert designed for demanding face and shoulder milling tasks in automotive, aerospace and general engineering where reliable chip formation and edge stability are essential Tiger·tec Gold PVD coating for longer life Versatile for Stahl, rostfreier Stahl, Titan Parallelogram 85° geometry for stable milling 15° clearance with D56 chipbreaker for chip control Maximise throughput with predictable cutting performance The insert combines a Tiger·tec Gold surface treatment and a coated carbide substrate to provide consistent wear behaviour and improved tool life. The applied PVD technology enhances thermal resistance at the cutting edge, meaning higher cutting speeds and longer intervals between indexings or replacements. For production environments this translates into measurable gains in cycle time and lower tool-change frequency, supporting continuous, cost-effective machining. Reliable chip control for safer milling cycles Equipped with the D56 chipbreaker and a 15° clearance angle, the geometry promotes controlled chip segmentation and evacuation. The parallelogram 85° shape improves approach angles on shoulder and slot milling, reducing chatter and promoting stability under interrupted cuts. This design reduces the risk of built-up edge formation and makes the insert particularly effective when machining Stahl and tougher alloys, where chip management is a common productivity limiter. Broad material capability with targeted grade design The WSP45G grade is engineered for versatile use across the ISO groups P, M and S, making it suitable for Stahl, rostfreier Stahl and Titan or heat-resistant superalloys. The grade’s balanced toughness and hardness combination supports reliable cutting-edge integrity when faced with varying workpiece hardness or thermal loads. Where mixed production runs are common, a single grade that spans these groups lowers tooling complexity and streamlines inventory handling. Practical advantages for process security and setup The insert’s standard thickness and precise tolerances enable simple toolholder seating and repeatable indexability, which shortens setup time and reduces scrap risk. As part of the Tiger·tec Gold family the component benefits from a proven coating strategy that aids process security and consistent surface finish generation. For shops seeking predictable results, the insert reduces rework and contributes to an overall increase in first-pass yield. Contact Metav Werkzeuge for tailored cutting data, availability and application advice on Walter Tools Tiger·tec Gold inserts — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data SKU: ADGT1807PER-D56-WSP45G-WALTER Article designation: ADGT1807PER-D56 WSP45G Series: Tiger-tec Gold Facts Clearance angle: 15° Insert size: 18 Plate thickness: 07 Tolerance class: G Special features Grade: WSP45G Chipbreaker: D56 Shape: Parallelogram 85° Substrate: coated carbide Applicable material groups: P / M / S Execution: T ISO designation: ADGT1807PER-D56 WSP45G FAQ What materials is this insert best suited for? The ADGT1807PER-D56 WSP45G insert is suitable for machining Stahl, rostfreier Stahl and Titan, as the WSP45G grade was developed for P, M and S material groups. How does the D56 chipbreaker affect milling performance? The D56 chipbreaker on this Walter Tools insert promotes controlled chip segmentation and evacuation, improving surface finish and reducing the risk of built-up edge during continuous and interrupted cuts. Can this insert be used for high-speed milling? Thanks to the Tiger·tec Gold PVD coating and the coated carbide substrate, the insert supports elevated cutting speeds with improved thermal resistance and extended tool life. Is the geometry compatible with standard toolholders? The parallelogram 85° form and the standard thickness allow secure seating in appropriate milling cutters; always verify the toolholder’s seat specification against the insert’s ISO designation. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADGX10T3PER-F56 WHH15 Wendeplatten - Walter Tools
Combining the WHH15 coated carbide grade with the F56 chipbreaker and a parallelogram 85° geometry yields a stable, repeatable cutting solution that is easy to index and maintain. Benefit from precise chip control and compact toolholder compatibility; order the insert directly via Metav Werkzeuge or ask our technical consultants for specific application guidance. Fräswendeschneidplatte ADGX10T3PER-F56 WHH15 – Parallelogram 85°, 15° clearance, Walter Tools A compact milling indexable insert for precision operations where controlled chip formation and repeatable edge performance are required Coated carbide grade WHH15 for durability Parallelogram 85° geometry for stable cutting 15° clearance angle reduces rubbing F56 chipbreaker for controlled chip flow Consistent cutting performance through engineered geometry The insert combines a parallelogram 85° shape with a 15° clearance to reduce friction and promote a stable cutting action. The interplay of geometry and the F56 chipbreaker provides controlled chip formation, which translates into fewer interruptions and more consistent cycle times. As a coated carbide solution, the grade supports repeatable edge life under standard milling conditions; users should consult the manufacturer product matrix to confirm suitability for specific workpiece materials before use. Precision, tolerance and secure seating for reliable results With tolerance class G and a compact T3 thickness, the design supports accurate seating in compatible toolholders and reduces runout risk during high-speed indexing. The chip control strategy of the insert minimises re-cutting and heat concentration at the cutting edge, contributing to stable tool life and reproducible surface quality. Clear technical labelling simplifies tool management and replacement, helping to maintain process security in production environments. Streamlined logistics and fast tool changes for productivity gains The standardised ISO-style designation assists in rapid identification and stocking: ADGX10T3PER-F56 WHH15. The nominal size and thickness allow use in compact milling heads where space is limited, lowering inventory complexity and shortening changeover times. As an indexable insert, the component delivers cost-effective reconditioning of cutting edges and reduces downtime compared with solid-tool replacement. Safe selection and application advice for optimal use Material compatibility varies by grade and coating; the WHH15 designation indicates a coated cemented carbide class, but specific machining parameters must be checked in the product matrix or technical datasheets. For set-up, select a toolholder matched to the parallelogram geometry and observe recommended feeds and speeds to preserve edge life. Manufacturer information and technical documentation should be consulted for best-practice machining windows. Contact Metav Werkzeuge for tailored integration advice on Walter Tools ADGX10T3PER-F56 WHH15, including specification matching and availability support Technical Data Article number: ADGX10T3PER-F56-WHH15-WALTER Product: Fräswendeschneidplatte Manufacturer: Walter Tools WPL grade: WHH15 Series: Walter Schneidstoffsorte - Serie offen Designation: ADGX10T3PER-F56 WHH15 SKU label: Fräswendeschneidplatte ADGX10T3PER-F56 WHH15 Walter Tools Core dimensions Size: 10 Thickness: T3 Shape: Parallelogramm 85° Clearance angle: 15° Chipbreaker: F56 Tolerance class: G Features / Notes Coating/material: Katalogabhängig Execution: X ISO designation: ADGX10T3PER-F56 WHH15 Guidance: Check product matrix for material suitability FAQ What does the designation ADGX10T3PER-F56 WHH15 mean? The designation identifies the insert geometry and size (10, T3 thickness), the F56 chipbreaker and the WHH15 coated carbide grade for the Walter Tools milling insert. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes predictable chip formation and evacuation, which reduces heat build-up at the cutting edge and helps maintain consistent surface finish. Is this insert suitable for all metals? Material suitability depends on the coating and grade; check the Walter Tools product matrix to confirm whether the WHH15 grade matches the intended workpiece material. What are the key installation considerations? Ensure the insert seats correctly in a compatible parallelogram toolholder, verify tolerance class G fit, and use recommended feeds and speeds to avoid premature wear. How is edge life maintained for this type of insert? Edge life is optimised by correct toolholder alignment, appropriate cutting parameters and by taking advantage of the indexed faces when one edge becomes worn. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
ADGX10T3PER-F56 WPM15G WPM15G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the F56 chipbreaker and a precise Parallelogram 85° form, this insert offers extended tool life and consistent chip control; order the ADGX10T3PER-F56 WPM15G directly via Metav Werkzeuge or consult our advisors for application-specific selection. ADGX10T3PER-F56 WPM15G – Parallelogram 85° indexable milling insert, Tiger·tec Gold, Walter Tools The ADGX10T3PER-F56 WPM15G is a coated carbide indexable milling insert engineered for stable general-purpose milling, featuring an F56 chipbreaker and a 15° relief angle for secure seating and predictable cutting behaviour. Tiger·tec Gold coating for reliable wear resistance Parallelogram 85° form for stable milling engagement F56 chipbreaker optimised for versatile chip control 15° relief angle for consistent seating and geometry Longer tool life through advanced coating and grade The combination of Tiger·tec Gold technology and the WPM15G grade provides a coating architecture and substrate balance that aims to extend tool life under demanding conditions. By favouring a coated carbide construction, the insert reduces flank wear and helps maintain a steady cutting edge, which in turn supports higher uptimes and fewer tool changes. This benefit is particularly relevant where consistent component quality and reduced downtime contribute directly to production efficiency. Geometry that stabilises the machining process The Parallelogram 85° form together with the 15° relief angle and F56 chipbreaker produces a reliable cutting geometry that improves process stability. The parallelogram shape gives a positive cutting engagement and helps distribute forces evenly across the insert seat, while the chipbreaker design promotes controlled chip formation and evacuation. Tolerance class G ensures accurate seating in standard toolholders, reducing vibration and enabling repeatable results in serial production. Straightforward integration into indexable systems Designed to meet standard indexable insert conventions, the ADGX10T3PER-F56 format makes integration into existing milling tool assemblies simple and predictable. Compatibility with conventional clamping systems and a common size designation supports quick replacement and inventory standardisation. As a Tiger·tec Gold series item from Walter Tools, the insert is aimed at workshops seeking a balance of wear resistance and process reliability without extensive retooling. Material guidance and application checks The grade WPM15G denotes a coated carbide solution; however, specific material suitability should be verified in the manufacturer's product matrix. This ensures the selected insert is matched to the workpiece material and cutting conditions. For users less familiar with technical classifications: a coated carbide insert combines a hard substrate with a thin, engineered surface layer to resist heat and abrasion, making it appropriate for many general milling tasks when matched correctly according to the matrix. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts and ensure the ADGX10T3PER-F56 WPM15G matches the intended application; Metav Werkzeuge can advise on tooling combinations and availability (info@metav-werkzeuge.com | +49 2822 7131930) Technical data Article number: ADGX10T3PER-F56-WPM15G-WALTER Article name: ADGX10T3PER-F56 WPM15G Manufacturer: Walter Tools Product type: Indexable milling insert Series: Tiger·tec Gold Core dimensions & numbers Insert size: 10 Insert thickness: T3 Relief angle: 15° Form angle: Parallelogram 85° Chipbreaker: F56 Tolerance class: G Materials & special features Grade: WPM15G (coated carbide) Coating technology: Tiger·tec Gold Execution: X Material designation: Katalogabhängig FAQ What chip control can be expected from this insert? The ADGX10T3PER-F56 WPM15G uses an F56 chipbreaker that is engineered for controlled chip formation and evacuation, improving process stability when the Walter Tools indexable milling insert is used in appropriate cutting conditions. Is this insert suitable for high-speed milling? The Tiger·tec Gold coating and WPM15G grade are designed to enhance wear resistance; however, high-speed suitability depends on the specific machining parameters and should be confirmed in the manufacturer's product matrix for the ADGX10T3PER-F56 WPM15G. How does the Parallelogram 85° form affect cutting forces? A Parallelogram 85° form provides a positive engagement angle that helps distribute cutting forces, reducing shock loads and promoting smoother milling when the insert is mounted in the correct Walter Tools toolholder. Can the ADGX10T3PER-F56 be used across different toolholders? The ADGX10T3PER-F56 WPM15G follows standard indexable insert dimensions and seating conventions, so it is compatible with matching clamping systems; verify seat and tolerance compatibility in the toolholder specification. Where to verify material suitability for this grade? Material compatibility for the WPM15G grade should be checked against the Tiger·tec Gold product matrix provided by Walter Tools to ensure the ADGX10T3PER-F56 WPM15G meets the workpiece and process requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADGX1606PER-F56 WXM15 WXM15 Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, targeted chip control and a geometry optimised for non‑ferrous machining to maintain smooth production. Order the insert directly via Metav Werkzeuge or consult our technical team for material‑specific guidance. ADGX1606PER-F56 WXM15 Fräswendeschneidplatte – Walter Tools, uncoated carbide for non‑ferrous metals The ADGX1606PER-F56 WXM15 is a parallelogram indexable insert designed for productive machining of non‑ferrous materials, combining a defined 15° relief and a dedicated F56 chipbreaker for reduced material adhesion. Uncoated carbide WXM15 for non‑ferrous metals Parallelogram 85° for stable positioning 15° relief angle for effective chip evacuation Chipbreaker F56 reduces material adhesion Higher throughput for non‑ferrous machining The WXM15 grade is an uncoated carbide designed specifically for the ISO N group, making it well suited to aluminium, copper and brass. Its cutting geometry emphasises low cutting forces and sharp cutting edges, which together enable faster feed rates and reliable surface quality on soft, adhesive materials. The result is measurable productivity gains when processing non‑ferrous workpieces. Reduced adhesion and improved chip control Equipped with the F56 chipbreaker, this indexable insert helps to break chips into manageable forms and reduces tendency for built‑up edge on sticky metals. The combination of the chipbreaker and the 15° relief promotes consistent chip flow and reduces machine downtime for manual cleaning, contributing to a steadier production rhythm and less scrap. Stable seating and repeatable accuracy The parallelogram 85° shape provides positive location and secure clamping in compatible toolholders, which supports repeatable positioning and consistent cutting geometry across index changes. This stability preserves the cutting edge profile and assists in predictable tool life, reducing the need for frequent re‑adjustment and maintaining component tolerances. Practical handling and series benefits As part of the Walter N‑Sortensystem, the insert fits established toolholder systems and benefits from the series’ focus on broad material coverage and process security. The straightforward handling of indexable inserts in this series cuts set‑up time and simplifies inventory management, while the uncoated nature of the grade avoids coating‑related adhesion issues on aluminium alloys. Application clarity and material scope Specified for the machining of non‑ferrous metals, the insert excels where sharp edges and low friction are required to avoid material build‑up. Typical use cases include face milling, light pocketing and finishing operations on aluminium parts, copper components and brass fittings where good surface quality and minimal burr formation are priorities. For material‑specific advice or to check compatibility with existing toolholders, contact Metav Werkzeuge for detailed consultation and availability at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data SKU: ADGX1606PER-F56-WXM15-WALTER Article designation: ADGX1606PER-F56 WXM15 Product type: Fräswendeschneidplatte Series: Walter N‑Sortensystem Manufacturer: Walter Tools Core specifications Relief angle: 15° Insert form: Parallelogram 85° Insert size: 16 Thickness: 06 Tolerance class: G Chipbreaker: F56 Special features Grade: uncoated carbide (WXM15) Material group: N (non‑ferrous metals) Execution: X Suitable for aluminium, copper, brass FAQ What materials is this insert intended for? The ADGX1606PER-F56 WXM15 is intended for ISO group N, i.e. non‑ferrous metals including aluminium, copper and brass. Is the cutting grade coated? No, the WXM15 grade is an uncoated carbide, chosen to reduce adhesion issues when machining soft, sticky materials. How does the chipbreaker affect performance? The F56 chipbreaker on this insert promotes controlled chip formation and reduces built‑up edge, improving surface finish and reducing manual cleaning. Will this insert fit standard Walter N‑system holders? Yes, the ADGX1606PER-F56 belongs to the Walter N‑Sortensystem and is compatible with matching toolholders designed for this series. What advantages does the 15° relief provide? The 15° relief combines effective clearance with low cutting forces, aiding chip flow and reducing friction during machining of non‑ferrous alloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADHT0803PEL-G88 WXN15 T Wendeplatten - Walter Tools
Take advantage of the combination of a sharp, uncoated carbide grade and an optimised chipbreaker to ensure efficient, low-adhesion machining of non-ferrous metals; request technical advice from Metav Werkzeuge or order directly via Metav Werkzeuge for reliable availability and application support. ADHT0803PEL-G88 WXN15 Fräswendeschneidplatte – parallelogram 85°, 15° relief, Walter Tools The ADHT0803PEL-G88 WXN15 is a parallelogram milling insert designed for productive machining of non‑ferrous metals with a positive cutting geometry and a G88 chipbreaker. Parallelogram 85° form for versatile milling Sharp, uncoated carbide grade WXN15 15° relief angle for positive cutting geometry Chipbreaker G88 prevents material build-up High-efficiency machining of non‑ferrous metals The combination of the WXN15 uncoated carbide grade and a sharp edge geometry delivers low cutting forces and minimal adhesion when processing non‑ferrous metals such as aluminium, copper and messing. The uncoated, wear‑resistant substrate permits a very keen cutting edge that reduces built‑up edge formation, while the integrated G88 chipbreaker supports predictable chip formation and evacuation. As a result, cycle times can be shortened and tool change frequency reduced, improving overall process efficiency. Positive geometry for smoother cuts and reduced power draw A 15° relief angle and the parallelogram 85° shape provide a positive rake and favourable approach angle for face and shoulder milling operations. This geometry lowers cutting forces and vibration, which leads to improved tool life and steadier power consumption on the machine. The modest 03 thickness offers a balance between edge stability and cutting access in confined toolholders, enabling precise material removal without unnecessary overload. Consistent surface quality with controlled chip behaviour The purposeful interaction of the sharp carbide grade and the G88 chipbreaker helps to avoid material build‑up on the cutting edge, producing a cleaner surface finish on the workpiece. Stable chip control reduces interruptions in automated setups and contributes to repeatable manufacturing results. Where surface quality and dimensional consistency are required, the insert’s design supports reliable production runs and predictable inspection outcomes. Practical integration into production and inventory The insert belongs to the Walter N‑Sortensystem, making it compatible with established Walter tool families and common clamping solutions. The clear designation and standard form allow straightforward stockkeeping and quick replacement in tool assemblies. For complex or batch production scenarios, technical documentation and material recommendations can be provided to support process parameter selection and tool‑holder pairing. For detailed application advice or to secure supply of the ADHT0803PEL-G88 WXN15 milling insert from Walter Tools, contact Metav Werkzeuge for prompt consultation and procurement support. Technical data Article number: ADHT0803PEL-G88-WXN15-WALTER Designation: ADHT0803PEL-G88 WXN15 Product type: Milling insert Series: Walter N‑Sortensystem Facts Relief angle: 15° Insert size: 08 Thickness: 03 Form: Parallelogram 85° Tolerance class: H Special features Grade: WXN15 (uncoated carbide) Chipbreaker: G88 Execution: T Material application: Non‑ferrous metals (N) FAQ What materials is this insert intended for? The ADHT0803PEL-G88 WXN15 milling insert is intended for non‑ferrous metals such as aluminium, copper and messing, utilising the sharp, uncoated WXN15 grade and the G88 chipbreaker for low adhesion. Is the insert coated or uncoated? This insert is uncoated carbide (WXN15), selected to provide a very sharp cutting edge for NE‑metal applications where coatings could promote built‑up edge. Which operations benefit most from the parallelogram form? The parallelogram 85° form is suitable for face and shoulder milling where versatile approach angles and good edge visibility are required; it also supports effective chip evacuation with the G88 geometry. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods from the manufacturer.
ADHT0803PER-G88 WK10 T Wendeplatten - Walter Tools
Take advantage of the combination of stable chip formation with the G88 chipbreaker and the WK10 uncoated carbide grade for consistent, productive milling. Order the ADHT0803PER-G88 WK10 insert directly via Metav Werkzeuge or request application advice from their consultants. ADHT0803PER-G88 WK10 milling indexable insert by Walter Tools — G88 chipbreaker, 15° clearance ADHT0803PER-G88 WK10 is a parallelogram-shaped milling insert designed for general milling applications where predictable chip control and robust cutting edges are required Precision uncoated carbide grade WK10 G88 chipbreaker for controlled chip formation Parallelogram 85° geometry for profiling stability 15° clearance for secure cutting engagement Reliable chip control for uninterrupted production The G88 chipbreaker is engineered to produce short, manageable chips under a wide range of cutting conditions, which supports uninterrupted machining and reduces machine downtime. The uncoated WK10 cemented-carbide grade provides a balance between toughness and wear resistance; its open-series design means the grade is suited for various applications, while the specific workpiece suitability should be verified against the product matrix. This combination facilitates a smoother chip flow and simplifies chip evacuation in diverse milling operations. Geometry that enhances accuracy and tooling life The parallelogram 85° shape and 15° clearance deliver a geometry optimised for stable cutting forces and predictable contact conditions in the tool pocket. The insert’s tolerance class H contributes to repeatable seating and consistent tool runout, which translates into more accurate part profiles and reduced rework. For cutters requiring defined lead angles or specific approach angles, this geometry supports controlled engagement and helps to protect the cutting edge during interrupted cuts. Material concept and application guidance for process reliability The insert is supplied in an uncoated cemented-carbide form as indicated by the WK10 designation; the open-series description reflects a universal approach to grade selection. While the grade offers solid baseline performance, the workpiece suitability must be confirmed via the product matrix for optimal results—this ensures the selected grade and chipbreaker match the intended materials and cutting parameters. Where higher abrasion resistance or specific coatings are required, alternative grades and coated versions should be considered. Integration into tooling systems and economic benefits As a standard indexable milling insert with the designation ADHT0803PER-G88 WK10, it fits into a wide range of milling cutter bodies that accept parallelogram inserts of size 08 and thickness code 03. The robust edge geometry and stable chip control help to extend effective cutting intervals, supporting a favourable cost-per-part metric and predictable tool-change planning. The open-series approach also simplifies inventory management, allowing straightforward substitution within the same grade family when necessary. Contact Metav Werkzeuge for application support or to secure ADHT0803PER-G88 WK10 inserts; technical consultation and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADHT0803PER-G88-WK10-WALTER Product designation: ADHT0803PER-G88 WK10 Product type: milling indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Size code: 08 Thickness code: 03 Clearance angle: 15° Shape: Parallelogram 85° Tolerance class: H Special features Grade: WK10 (uncoated cemented carbide) Chipbreaker: G88 Execution: T Series description: open series, check product matrix for material suitability FAQ What materials is the ADHT0803PER-G88 WK10 suitable for? Workpiece suitability must be checked against the product matrix; the ADHT0803PER-G88 WK10 is an uncoated cemented-carbide insert intended for general milling applications, with material ranges to be confirmed per application. How does the G88 chipbreaker affect machining? The G88 chipbreaker promotes short and controllable chips, reducing risk of chip entanglement and improving process stability during continuous milling. What does the parallelogram 85° shape offer in practice? The parallelogram 85° geometry provides stable cutting engagement and predictable contact conditions, which supports accurate profiling and reliable edge life in milling operations. Is the insert coated? The WK10 designation specifies an uncoated cemented-carbide grade; coating options are not indicated for this specific item and should be selected if required for abrasion-prone applications. Which tolerance and seating accuracy can be expected? The insert is supplied in tolerance class H, offering repeatable seating accuracy suitable for controlled tool runout and consistent part quality. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names remain the property of their respective owners. Mention of brand names such as Walter Tools is for identification and explanatory purposes only; there is no affiliation implied. The offered article is original and factory new.
ADHT0803PER-G88 WXN15 WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of a very sharp cutting edge, an uncoated carbide grade optimised for non‑ferrous materials and a dedicated G88 chipbreaker to reduce built‑up edge and maintain consistent machining performance; order the milling insert directly via Metav Werkzeuge or consult our team for application advice. ADHT0803PER-G88 WXN15 milling indexable insert — 15° relief, parallelogram 85° — Walter Tools The ADHT0803PER-G88 WXN15 is a milling indexable insert engineered for precise, high‑quality machining of non‑ferrous metals in production and jobbing environments. *Uncoated carbide grade for NE‑metals *15° relief for reduced rubbing *Parallelogram 85° insert form *G88 chipbreaker for adhesion control Reduced built‑up edge and clean chips for non‑ferrous machining The combination of uncoated carbide and the WXN15 grade delivers a very sharp cutting edge that helps to prevent material adhesion when machining aluminium, copper and brass. The included G88 chipbreaker promotes predictable chip formation and evacuation, reducing the risk of clogging and rework. This results in more stable processes and fewer interruptions on the shop floor, especially in operations where surface finish and dimensional consistency are critical. Geometry designed for secure engagement and precision The 15° relief and parallelogram 85° plate form provide an advantageous cutting orientation for shoulder milling and light profiling of non‑ferrous workpieces. The geometry reduces flank contact and heat build‑up while supporting a controlled cutting action. As part of the Walter N‑grade system, this insert offers a consistent performance window for applications that require repeatable results and straightforward insert indexing. Practical benefits for production and easy process integration The insert’s size and thickness support common toolholders and clamping systems, making retrofits into existing milling setups uncomplicated. With the clear designation and standard form, the component simplifies tool management and reduces set‑up time. For production planners and machinists seeking a reliable solution for NE‑materials, the insert offers a pragmatic balance of precision and process stability without the need for coated grades. Contact Metav Werkzeuge for a tailored recommendation on Walter Tools milling inserts — quote ADHT0803PER-G88 WXN15 for non‑ferrous machining and request detailed process parameters via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADHT0803PER-G88-WXN15-WALTER Designation: ADHT0803PER-G88 ISO designation: ADHT0803PER-G88 WXN15 Core data Size: 08 Thickness: 03 Relief angle: 15° Insert form angle: 85° Tolerance class: H Special features Grade: WXN15 (uncoated carbide) Chipbreaker: G88 Series: Walter N‑grade system Material application: non‑ferrous metals (aluminium, copper, brass) Execution: T FAQ What materials is the ADHT0803PER-G88 WXN15 suitable for? The ADHT0803PER-G88 WXN15 is designed for non‑ferrous metals such as aluminium, copper and brass and performs well where sharp, uncoated cutting edges are required. How does the G88 chipbreaker affect machining? The G88 chipbreaker promotes controlled chip formation and evacuation, which helps to reduce built‑up edge and keep surfaces cleaner during milling of NE‑materials. Is this insert compatible with standard toolholders? Yes, the insert’s parallelogram 85° form and standard size make it compatible with common milling toolholders that accept this geometry and thickness. What process benefits does the 15° relief provide? The 15° relief reduces flank contact and friction, lowering heat generation and improving cutting action during shoulder milling and light profiling. Where can one get application advice or order this insert? For application support and ordering information, consult Metav Werkzeuge and reference the exact designation ADHT0803PER-G88 WXN15 when requesting parameters or stock details. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADHT10T3PER-G88 WK10 T Wendeplatten - Walter Tools
Take advantage of the combination of WK10 uncoated carbide, a G88 chipbreaker and a 15° relief angle for consistent chip control and predictable tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. ADHT10T3PER-G88 WK10 milling indexable insert — Parallelogram 85°, 15° relief | Walter Tools The ADHT10T3PER-G88 WK10 is a parallelogram 85° milling indexable insert intended for versatile milling tasks where stable chip control and reproducible performance are priorities Parallelogram 85° insert geometry 15° relief angle for stable cutting G88 chipbreaker for reliable chip control Uncoated carbide grade WK10 Consistent chip control for steady productivity The combination of the G88 chipbreaker with the uncoated carbide grade delivers improved chip formation in a range of machining conditions. The chipbreaker is engineered to break and evacuate chips reliably, which reduces re-cutting and minimises interruptions in continuous milling operations. This results in more stable machining cycles and contributes to higher overall process efficiency. For precise expectations regarding workpiece materials, consult the manufacturer matrix to confirm compatibility. Stable geometry for predictable tool life The parallelogram 85° insert form and the 15° relief angle provide a robust edge geometry that enhances support during side and face milling operations. The moderate relief angle helps maintain cutting-edge strength while reducing rubbing at the flank, supporting repeatable tool performance. The insert’s designation and thickness (T3) indicate a compact but sturdy profile suited to many common milling holders; the WK10 grade is an uncoated carbide designed for general-purpose use, and checks against the product matrix are recommended to determine optimal cutting parameters for specific materials. Clear selection and integration for machining systems Integration into standard milling toolholders is straightforward thanks to the common ADHT-style geometry and the nominal size indicator. Selection should be guided by the intended application: choose the WK10 grade and G88 chipbreaker where consistent chip control and economical performance are required. Technical compatibility—such as seat geometry, clamping type and recommended cutting data—can be confirmed with Metav Werkzeuge before purchase to ensure the insert matches the machining strategy and equipment used. For reliable, productive milling with Walter Tools' WK10 grade and G88 chipbreaker, contact Metav Werkzeuge for tailored technical advice and prompt supply: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: ADHT10T3PER-G88-WK10-WALTER Designation: ADHT10T3PER-G88 WK10 Manufacturer: Walter Tools Facts Relief angle: 15° Insert size: 10 Plate thickness: T3 Tolerance class: H Special features Chipbreaker: G88 Grade: WK10 (uncoated carbide) Insert form: Parallelogram 85° Series: Walter Schneidstoffsorte - Serie offen Execution: T Material: Katalogabhängig FAQ What materials is this insert suitable for? Material suitability depends on the specific machining task; the ADHT10T3PER-G88 WK10 uses an uncoated carbide grade (WK10) and the product matrix should be consulted to determine suitability for particular steels and non-ferrous alloys. How does the G88 chipbreaker help in milling? The G88 chipbreaker promotes controlled chip formation and evacuation, which reduces interruptions and improves surface quality when using the ADHT10T3PER-G88 WK10 insert. What are the key geometric features to consider? The parallelogram 85° form and the 15° relief angle are the primary geometric factors that deliver stability and edge support for side and face milling operations with this insert. Is the insert coated? The ADHT10T3PER-G88 WK10 is supplied as an uncoated carbide grade (WK10), so users should select cutting parameters accordingly and verify coating needs per application. Which toolholders are compatible with this designation? ADHT-style holders that accept a parallelogram 85° insert form and the corresponding size accommodate this insert; confirm seat and clamping compatibility with supplier documentation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are used solely for explanation and identification. No affiliation is claimed between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com