Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
ADMT080304R-F56 WKP35S Wendeplatten - Walter Tools
Reliable high-performance milling is delivered by the WKP35S grade combined with the Tiger‑tec Silver series and a precise 15° relief; ideal for producers seeking consistent results in steel and cast iron machining — order via Metav Werkzeuge or consult our specialists for tool selection. ADMT080304R-F56 WKP35S Milling indexable insert, Tiger‑tec Silver – Walter Tools The ADMT080304R-F56 WKP35S is a parallelogram milling insert engineered for robust cutting of steel and cast iron, combining the WKP35S coated carbide grade with a chipbreaker designed for reliable chip control. Tiger‑tec Silver coating for reliable tool life WKP35S grade optimised for steel and cast iron Parallelogram 85° geometry for secure seating 15° relief and 0.4 mm corner radius for precision Increased productivity through proven grade technology The WKP35S grade — part of the Tiger‑tec Silver series — brings a measurable improvement in process stability for medium to heavy milling applications. Designed as a coated carbide cutting grade, the insert’s surface treatment reduces abrasive wear and supports longer cutting intervals, which in practical terms means fewer insert changes and steadier cycle times on batch production runs. The F56 chipbreaker geometry helps form and evacuate chips consistently when machining P and K materials, translating into higher throughput and lower tooling costs per finished part. Geometry and seat design that support accurate machining A parallelogram 85° plate form with a 15° relief provides a reliable seating angle and positive cutting action for shoulder milling and light profiling. The 0.4 mm corner radius balances edge strength with the ability to achieve close-to-final dimensions, reducing the need for secondary finishing. These geometric choices affect process predictability: the insert’s form reduces chatter risk in common milling set-ups and helps maintain surface integrity on cast and steel components, particularly where dimensional repeatability is required across series production. Application guidance and material compatibility Marked for material groups P / K, the insert is intended for machining unalloyed and alloyed steel as well as cast iron. The WKP35S grade is optimised for the heat and chip-formation behaviour typical of these groups, providing stable edge life under variable cutting conditions. When replacing conventional grades, operators can expect comparable surface quality with improved wear resistance; for new set-ups, selecting appropriate cutting data alongside the F56 chipbreaker will be decisive to achieve long tool life and secure chip evacuation. Practical benefits for workshop and production planners By combining a resilient coating system with a purposely engineered chipbreaker, this insert reduces unplanned interruptions and supports predictable maintenance cycles. The compact insert size and standard thickness designation enable straightforward integration into common milling cutters, simplifying inventory management. Choosing the Tiger‑tec Silver WKP35S solution helps to standardise tooling across similar steel and cast‑iron operations, supporting both day-to-day reliability and long‑term cost efficiency. For advice on applying the WKP35S Tiger‑tec Silver grade and availability of the ADMT080304R-F56, contact Metav Werkzeuge via info@metav-werkzeuge.com or +49 2822 7131930. Technical Data SKU: ADMT080304R-F56-WKP35S-WALTER Designation: ADMT080304R-F56 WKP35S Type: Milling indexable insert Brand: Walter Tools Core technical data Free angle: 15° Corner radius: 0.4 mm Geometry: Parallelogram 85° Size designation: 08 Thickness designation: 03 Special features and materials Series: Tiger‑tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F56 Tolerance class: M Execution: T Material groups: P (steel), K (cast iron) FAQ What materials is this insert suitable for? The ADMT080304R-F56 WKP35S insert is specified for material groups P and K, meaning it is suited to machining various steels and cast iron as a primary application. How does the Tiger‑tec Silver series improve performance? Tiger‑tec Silver provides a robust coating system that enhances wear resistance and thermal stability, enabling the WKP35S grade to maintain edge life and process stability during prolonged milling cycles. Which chipbreaker is integrated and what is its benefit? The insert features the F56 chipbreaker, which is designed to control chip shape and evacuation in both steel and cast iron operations, reducing tool clogging and improving surface finish. Is the geometry suitable for shoulder milling and profiling? Yes; the parallelogram 85° form combined with a 15° relief and 0.4 mm corner radius is well suited to shoulder milling and light profiling where dimensional control is required. Can this insert be used as a direct replacement for other WKP grades? The WKP35S grade is optimised for a balance of wear resistance and toughness; compatibility as a direct replacement depends on the previous grade’s properties and the specific cutting conditions, but WKP35S often improves tool life in mixed steel and cast iron applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are referenced for explanation only and do not imply any affiliation between our company and the trademark holders. The offered item is an original, factory‑new product of the respective manufacturer.
ADMT080304R-F56 WSM35G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSM35G grade for secure chip control and extended edge life in demanding milling of stainless steels and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application support. ADMT080304R-F56 WSM35G milling insert – Parallelogram 85°, 15° relief (Walter Tools) A ADMT080304R-F56 WSM35G milling insert designed for productive milling of stainless steels and heat‑resistant superalloys in industrial CNC operations. Tiger‑tec Gold coating for heat resistance WSM35G grade for stainless and superalloys Parallelogram 85° form with 15° relief 0.4 mm corner radius for robust edges Increase cutting stability in demanding materials The combination of the WSM35G cutting grade and the Tiger·tec Gold coating delivers improved edge stability and stable chip formation when machining tough materials. Specifically developed for ISO M and S groups, this coated carbide grade resists thermal softening and edge breakdown during prolonged cuts. As a result, the indexable insert supports consistent component quality and reduces unplanned tool changes, contributing directly to smoother production flows. Geometry engineered for secure engagement and accessibility The parallelogram 85° insert form with a 15° relief angle provides a controlled cutting geometry that reduces radial cutting forces and helps maintain a positive rake in milling cutters. The 0.4 mm corner radius balances edge strength with surface finish capability, making the grade suited to both continuous and interrupted cuts. These geometric choices enhance mechanical reliability at the cutter seat and simplify toolholder selection for integrated milling systems. Optimise throughput and process reliability By combining a thermally stable coating with a robust substrate, the insert enables higher cutting parameters where material and machine allow, improving material removal rates and lowering overall machining costs per component. The tolerance class M ensures repeatable seating and interchangeability between cutter bodies, supporting predictable tool life and easier inventory management on the shop floor. For production environments seeking efficient, reproducible results, this indexable solution contributes to measurable process security. Practical selection and application advice Choose this insert where stainless steels or heat‑resistant superalloys demand a coated carbide solution with high thermal resilience and consistent chip control. The F56 chipbreaker geometry and the WSM35G grade are particularly suitable when stable chip formation and edge retention are priorities. For adaptions to different workpiece geometries or surface requirements, consult milling cutter specifications to ensure compatible seat angles and clamp types; small geometry changes can significantly affect finish and tool life. Contact Metav Werkzeuge for availability, sample trials and tailored application advice on Walter Tools Tiger·tec Gold inserts – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT080304R-F56-WSM35G-WALTER Label: Fräswendeschneidplatte ADMT080304R-F56 WSM35G Walter Tools Type: Milling insert Facts Relief angle: 15° Corner radius: 0.4 mm Plate size: 08 Plate thickness code: 03 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSM35G Chipbreaker: F56 Plate form: Parallelogram 85° Material groups: S / M (superalloys / stainless steels) Execution: T Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The ADMT080304R-F56 WSM35G milling insert is formulated for ISO M and S groups, making it suitable for stainless steels and heat‑resistant superalloys when high thermal stability and chip control are required. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WSM35G grade increases heat resistance and edge life, which helps maintain consistent cutting performance and reduces the frequency of insert changes in continuous production. What does the 85° parallelogram form mean for cutter selection? The parallelogram 85° form provides a specific cutting orientation that improves accessibility and reduces radial loads; ensure the milling cutter accepts parallelogram seats with the corresponding relief and clamp design for correct seating. Is the 0.4 mm corner radius suitable for finishing? A 0.4 mm corner radius is a compromise between edge strength and surface finish; it offers robust performance for many finishing and semi‑finishing operations but may be adjusted depending on final surface requirements. Can this insert handle interrupted cuts? Yes, the combination of the WSM35G grade, F56 chipbreaker and the chosen geometry supports interrupted cutting where edge stability and chip evacuation are crucial. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080304R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from a high-performance PVD grade and a secure parallelogram form for consistent productivity and predictable tool life; order the ADMT080304R-F56 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. ADMT080304R-F56 WSP45G – Indexable milling insert, Tiger·tec Gold PVD, 15° relief – Walter Tools The ADMT080304R-F56 WSP45G is an indexable milling insert engineered for versatile face and shoulder milling in industrial production environments, optimised for steels, rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold PVD coating for long tool life 15° relief angle for versatile milling Parallelogram 85° form for secure cutting Suitable for Stahl, rostfreier Stahl and superalloys Increase throughput with a proven PVD grade The combination of the Tiger·tec Gold coating and the WSP45G grade provides a stable, wear-resistant cutting edge that translates into higher machining efficiency. As a PVD-coated solution, this insert offers improved heat resistance and adhesion between coating and substrate, which helps to maintain cutting performance under elevated temperatures typical of high-speed milling. The reliable coating behaviour reduces the frequency of index changes and supports consistent batch quality, making it suitable for shops aiming to reduce cycle time while maintaining repeatable surface finishes. Secure chip control and dependable performance on demanding materials Equipped with the chipbreaker F56, the plate supports predictable chip formation across a broad material range. The grade is specifically designed for machining Stahl, rostfreier Stahl and Superlegierungen/Titan, where chip morphology and heat management are critical. Stable chip control minimises rework and improves tool life, particularly when machining tough or gummy materials; this leads to fewer interruptions and a smoother production flow. For operations seeking to expand capability into more challenging alloys, the insert’s balanced geometry and cutting edge integrity provide a reliable baseline for process development. Precise seating, repeatable clamping and flexible machining setup The Parallelogram 85° shape, combined with a 15° relief and a corner radius of 0.4 mm, offers a secure seat in the cutter body and flexible cutting edge options for both roughing and finishing passes. The insert size code 08 and thickness code 03 correspond to standard cutter families, enabling quick tool changes and straightforward inventory management. The tolerance class M ensures reproducible positioning, which supports tight machining tolerances and reduces setup time. Overall, the geometry and specifications are chosen to balance cutting forces, rigidity and accessible cutting-edge choices for a range of milling scenarios. Contact Metav Werkzeuge for application advice, stock availability and tailored recommendations for the Walter Tools Tiger·tec Gold inserts, or request machining data for specific materials and speeds Technical data SKU: ADMT080304R-F56-WSP45G-WALTER Designation: ADMT080304R-F56 WSP45G Type: Fräswendeschneidplatte Brand: Walter Tools Facts Relief angle: 15° Corner radius: 0.4 mm Insert size code: 08 Thickness code: 03 Design & features Grade/Coating: Tiger·tec Gold – WSP45G (PVD-coated carbide) Chipbreaker: F56 Form: Parallelogram 85° Tolerance class: M Material suitability: Stahl; rostfreier Stahl; Superlegierungen/Titan FAQ What materials can this insert machine effectively? The ADMT080304R-F56 WSP45G insert is optimised for Stahl, rostfreier Stahl and heat-resistant superalloys, offering stable chip formation and thermal resistance for these groups. Is the coating suitable for high-speed milling? Yes, the Tiger·tec Gold PVD coating on the WSP45G grade is designed to withstand elevated temperatures, making it appropriate for higher cutting speeds in many milling operations. What cutting tasks is the parallelogram 85° form best for? The parallelogram 85° geometry provides secure seating and is particularly effective for face and shoulder milling where repeatable clamping and edge selection are important. How does the chipbreaker F56 affect process stability? The F56 chipbreaker promotes consistent chip control across a wide range of feeds, reducing the risk of built-up edge and improving surface finish and tool life stability. Can the insert be used for finishing passes? With a corner radius of 0.4 mm and the available cutting edges, the insert supports both productive roughing and controlled finishing operations when set up with appropriate parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080304R-G56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability and efficient chip control for predictable production results; the WKP35S grade with Tiger·tec Silver technology ensures long tool life and consistent surface finish. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. ADMT080304R-G56 WKP35S — Fräswendeschneidplatte by Walter Tools (Parallelogram 85°, 15° clearance) ADMT080304R-G56 WKP35S is a coated carbide milling insert designed for productive machining of steel and cast iron in industrial milling applications Tiger·tec Silver coating, WKP35S grade Parallelogram 85° form for precise milling 15° clearance angle for secure cutting Radius 0.4 mm for universal finishing Reliable material performance for steel and cast iron The combination of Tiger·tec Silver coating and the WKP35S carbide grade delivers a balance of wear resistance and thermal stability tailored to the ISO P and K material groups. This makes the insert particularly suitable for unalloyed and alloyed steel as well as cast iron, where abrasive wear and intermittent chip formation demand a robust cutting edge. The coating reduces flank and crater wear, extending cutting intervals and supporting predictable tool life, which benefits batch production and single‑piece flows alike. Consistent chip control and edge geometry that boosts productivity Equipped with the G56 chipbreaker and a 0.4 mm corner radius, the insert promotes reliable chip formation and evacuation under varying cutting conditions. The parallelogram 85° shape enhances insert rigidity and supports stable engagement in shoulder and face milling operations. With a 15° clearance angle the cutting edge achieves favourable shear conditions, lowering cutting forces and contributing to surface integrity. Together, these features reduce unplanned stoppages and improve cycle time consistency. Easy integration into existing tool systems for low downtime The insert format (designation ADMT080304R‑G56) and its dimensional series allow straightforward replacement in holders designed for this geometry. The standardised size and tolerance class M simplify inventory management and make tool changes predictable. Reduced setup complexity and the extended service intervals of the coated grade support lower overall processing costs and faster ramp‑up when changing jobs or materials. Practical advantages for production environments Built for repetitive industrial use, the insert’s balanced properties aim to combine process safety with surface quality and repeatability. The coated carbide substrate helps maintain a sharp, stable cutting edge across extended runs, while the chipbreaker geometry addresses typical chip shapes from steel and cast iron. For manufacturing teams seeking consistent part quality and fewer tool interventions, this solution offers a pragmatic route to higher productivity. Contact Metav Werkzeuge for tailored application advice or to request order options for Walter Tools inserts, including compatibility checks and recommended cutting data. Technical data Article number: ADMT080304R-G56-WKP35S-WALTER Designation: ADMT080304R-G56 WKP35S Type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Material base: P / K Chipbreaker: G56 Tolerance class: M Execution: T Facts Clearance angle: 15° Corner radius: 0.4 mm Plate form: Parallelogram 85° Plate size: 08 Plate thickness: 03 Special features Coating: Tiger·tec Silver Suitable for: Steel (P) and Cast iron (K) Application focus: productive milling, reliable chip control Design benefits: enhanced edge stability, standardised geometry FAQ Which materials are recommended for this insert? The ADMT080304R‑G56 WKP35S insert is recommended for steel (ISO group P) and cast iron (ISO group K), reflecting the WKP35S grade design and the Tiger·tec Silver coating. What benefit does the G56 chipbreaker provide? The G56 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of recutting and helping to maintain consistent surface finish during milling of steel and cast iron. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius offers a balance between strength and edge sharpness, supporting improved finishing and moderate robustness for interrupted cuts without excessive edge stress. Is this insert compatible with standard holders for parallelogram 85° types? The ADMT080304R‑G56 geometry follows standard parallelogram 85° dimensions and tolerance class M, enabling compatibility with holders designed for this insert family; verify holder designation against the ADMT08 series. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080304R-G56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD-coated grade and the G56 chipformer for dependable chip control and prolonged edge life; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. ADMT080304R-G56 (ADMT080304R-G56 WSP45G) indexable milling insert — Tiger·tec Gold, chipbreaker G56 | Walter Tools ADMT080304R-G56 WSP45G is an indexable milling insert designed for versatile milling across steels, stainless steels and heat-resistant alloys in industrial machining environments. Tiger·tec Gold PVD-coated grade WSP45G Suitable for steel, stainless steel and superalloys Parallelogram 85° geometry for stable engagement 15° relief with 0.4 mm corner radius High reproducibility and secure edge life for continuous milling The combination of the Tiger·tec Gold coating and a PVD-coated carbide base delivers consistent wear behaviour and reduces the risk of premature edge failure under typical milling stresses. The chosen grade targets the heat and chip-formation patterns encountered when machining steels and stainless steels, which means fewer interruptions in production and more predictable tool change cycles. The robust microstructure of the coated grade supports steady cutting forces, ensuring process stability even in medium-duty finishing and semi-roughing operations. Broad material capability with optimised chip control Designed for the ISO groups P/M/S, the insert supports machining of unalloyed and alloyed steels, stainless steels and heat-resistant superalloys or titanium, where thermal load and chip form demand a resilient grade. The integrated chipformer G56 improves chip breaking and evacuation, reducing re-cutting and the likelihood of built-up edge. As a result, surface quality benefits and machine downtimes are diminished, making the solution well suited to workshops that require both versatility and consistent component quality. Geometry and tolerance that simplify setup and repeatability The parallelogram 85° configuration together with a 15° relief and 0.4 mm corner radius provides a stable cutting engagement and improved edge security during radial and axial cuts. The insert's execution and tolerance class contribute to reliable seat positioning in compatible cutter bodies and support reproducible indexing. For production engineers this translates to predictable fixture behaviour and reduced time spent on re-centring or compensating for tool offset variation. If additional cutting data or application advice is required, the technical team at Metav Werkzeuge can provide tailored recommendations. Contact Metav Werkzeuge for specific cutting data, availability of Walter Tools Tiger·tec Gold inserts and application-focused advice tailored to the production needs. Technical Data SKU: ADMT080304R-G56-WSP45G-WALTER Label: Fräswendeschneidplatte ADMT080304R-G56 WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G ISO designation: ADMT080304R-G56 WSP45G Execution: T Tolerance class: M Core Data Relief angle: 15° Corner radius: 0.4 mm Plate form: Parallelogram 85° Plate size: 08 Plate thickness: 03 Materials & Features Material compatibility: P / M / S Chipbreaker: G56 Coating: Tiger·tec Gold (PVD) Application: Milling Design: Indexable milling insert FAQ What materials is this insert suited for? The WSP45G grade is suitable for steels, stainless steels and heat-resistant superalloys/titanium; the insert delivers balanced performance across the ISO P, M and S groups. What does the Tiger·tec Gold designation indicate? Tiger·tec Gold denotes Walter Tools’ PVD coating technology paired with a tailored carbide substrate to improve wear resistance and cutting-edge stability under milling conditions. How does the G56 chipformer affect machining? The G56 chipformer enhances chip breaking and evacuation, which supports improved surface finish and lowers the risk of chip-related interruptions during milling. Why choose a parallelogram 85° geometry? The parallelogram 85° geometry provides stable tool engagement and reliable cutting forces during radial and axial milling, helping to maintain dimensional consistency across batches. Is the corner radius suitable for finishing tasks? The 0.4 mm corner radius offers a compromise between edge strength and surface quality, making the insert appropriate for medium-to-fine finishing operations where edge robustness is required. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ADMT080308L-F56 WKP35S Wendeplatten - Walter Tools
Reliable productivity and broad material compatibility make the ADMT080308L-F56 WKP35S an efficient choice for demanding milling tasks. The Tiger·tec Silver coating and the WKP35S grade provide enhanced wear resistance and consistent chip control, while the 0.8 mm corner radius ensures edge security and predictable finishes. Order via Metav Werkzeuge or consult the technical advisors for application support. ADMT080308L-F56 WKP35S milling insert — Tiger·tec Silver, for steel and cast iron — Walter Tools The ADMT080308L-F56 WKP35S is a parallelogram 85° milling insert aimed at productive machining of steel and cast iron, combining a robust chipbreaker and a coated carbide grade for stable performance. Tiger·tec Silver coating for longer tool life Wide suitability for steel and cast iron machining Parallelogram 85° geometry for flexible cutter use 0.8 mm corner radius for secure cutting edges Durable coating and grade for longer productive runs The Tiger·tec Silver series, with the WKP35S grade, is engineered to resist abrasive and thermal wear commonly encountered when machining steel and cast iron. The combination of a coated carbide substrate and modern coating technology provides improved wear resistance and stable chip formation, which translates into fewer tool changes and higher throughput on the shop floor. This technical design reduces unexpected downtime and supports consistent production quality. Geometry and edge design that stabilise cutting performance The parallelogram 85° plate form, paired with a relief angle of 15° and a 0.8 mm corner radius, ensures reliable edge security and predictable contact conditions in the cut. The integrated F56 chipbreaker controls chip flow for typical cast and steel chips, improving surface finish and reducing the risk of built-up edge. Together these geometric choices support repeatable, vibration-resistant milling across a range of radial engagements. Process reliability through tailored application properties Built to tolerance class M, this insert offers reproducible mounting and dimensional consistency, helping to maintain process stability across multi-shift operations. The product’s suitability for material groups P and K (steel and cast iron) means one grade can cover several common production tasks, simplifying tooling inventory and decision-making. The overall effect is predictable tool life and a stable machining window for planners and operators. Practical benefits for toolroom and production use Compatibility with common milling cutter systems and a clear geometry profile make the insert straightforward to integrate into existing setups. The coated grade and the robust chipbreaker reduce rework and improve first-pass part quality, while the standardised plate size and thickness facilitate quick changes. For operations seeking a balance between tool life and surface quality, this configuration represents a practical, cost-effective choice. For application advice and availability of the Walter Tools ADMT080308L-F56 WKP35S insert, contact Metav Werkzeuge for tailored recommendations and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT080308L-F56-WKP35S-WALTER Designation: ADMT080308L-F56 WKP35S Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Silver Core data Relief angle: 15° Corner radius: 0.8 mm Plate form: Parallelogramm 85° Plate size: 08 Plate thickness: 03 Special features Grade: WKP35S Chipbreaker: F56 Material suitability: P / K Tolerance class: M Execution: T FAQ What materials is this insert designed for? The ADMT080308L-F56 WKP35S insert is specified for material groups P and K, meaning it is suited to machining steel and cast iron. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on the WKP35S grade enhances wear resistance and thermal stability, which contributes to longer useful tool life and consistent surface quality. What does the 85° parallelogram shape provide? The parallelogram 85° geometry offers flexible mounting positions and stable cutting engagement, helping to reduce vibrations and support a variety of milling strategies. Is the insert suitable for heavy roughing or finishing? With a 0.8 mm corner radius and the F56 chipbreaker, the insert balances edge strength and chip control; it is appropriate for robust roughing as well as finishing operations where this geometry and grade meet process parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
ADMT080308L-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of long tool life and stable chip control from the combination of Tiger·tec Gold coating and a robust 0.8 mm corner radius for reliable milling of steels, stainless steels and heat‑resistant alloys; order or request technical advice via Metav Werkzeuge for swift supply and application support. ADMT080308L-F56 WSP45G — indexable milling insert (Tiger·tec Gold) by Walter Tools The ADMT080308L-F56 WSP45G is a Tiger·tec Gold‑coated indexable milling insert designed for versatile face and profile milling across steel, stainless steel and high‑temperature alloys. Tiger·tec Gold PVD coating for long tool life Suitable for P / M / S material groups Parallelogram 85° geometry for stable engagement 0.8 mm corner radius for reliable edge strength Extended life and reproducible edge performance with Tiger·tec Gold The coated Tiger·tec Gold grade provides a PVD surface that improves thermal resistance and wear behaviour under typical milling loads. This results in consistent edge stability and fewer unscheduled tool changes, which supports higher machine uptime and predictable batch outputs. The coating technology is engineered for a broad range of applications, so operators benefit from fewer tool variants while maintaining process reliability. Geometry and chip control that support productive milling The parallelogram 85° insert geometry combined with a 15° clearance angle delivers secure engagement and good axial rigidity in slotting and shoulder milling. The integrated F56 chipbreaker assists in generating short, controllable chips on interrupted and continuous cuts, reducing rework and tool‑related stoppages. The 0.8 mm corner radius enhances edge strength, improving resistance to chipping under moderate radial depths of cut and making the insert suitable for both roughing and semi‑finishing operations. Predictable performance for mixed‑material production Designed for the P / M / S ISO groups, the grade is optimised for unalloyed and alloyed steels, rostfreier Stahl and heat‑resistant superalloys or titanium components. The tolerance class M supports close dimensional repeatability in assemblies where consistency matters. Together, the geometry, robust corner form and coating deliver measurable productivity benefits: longer tool life, reduced changeover frequency and improved surface consistency, helping to lower overall process costs while maintaining quality standards. For specific application recommendations or availability of Walter Tools Tiger·tec Gold inserts like the ADMT080308L‑F56 WSP45G, contact Metav Werkzeuge for expert machining advice and rapid supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ADMT080308L-F56-WSP45G-WALTER Part designation: ADMT080308L-F56 Brand: Walter Tools Product type: indexable milling insert Grade/sort: WSP45G Facts Corner radius: 0.8 mm Clearance angle: 15° Plate thickness: 3 mm Plate size designation: 08 Special features Coating: Tiger·tec Gold (PVD) Material groups: P / M / S (steel, rostfreier Stahl, superalloys/titanium) Geometry: parallelogram 85° Chipbreaker: F56 Tolerance class: M Series: Tiger‑tec Gold Execution/format: T Manufacturer: Walter Tools FAQ Which materials is this insert suitable for? The ADMT080308L‑F56 WSP45G insert is specified for the P / M / S ISO groups, meaning it is suitable for steel, rostfreier Stahl (stainless steel) and heat‑resistant superalloys/titanium when used with appropriate cutting data. What are the core benefits of the Tiger·tec Gold coating? Tiger·tec Gold offers enhanced thermal resistance and wear protection via PVD technology, which increases tool life and maintains cutting edge integrity during prolonged milling operations with the ADMT080308L‑F56 WSP45G. How does the parallelogram 85° geometry affect milling? The parallelogram 85° form provides a secure tool engagement and favourable cutting direction for face and shoulder milling, improving stability and contributing to repeatable process results when using this Walter Tools insert. Is the corner radius suitable for finishing work? The 0.8 mm corner radius balances edge strength and surface finish capability; it is robust for semi‑finishing and can produce reliable results in many finishing passes with correctly adjusted parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand name Walter Tools) is one of the world’s leading manufacturers of precision cutting tools. Protected trademarks and product names mentioned are the property of their respective owners and are used here for clarification only. There is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is original, factory‑new merchandise from the manufacturer.
ADMT080308R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the WKP35G grade for extended tool life and consistent machining results; the optimised F56 chipbreaker ensures controlled chips when cutting steel and cast iron, supporting reliable productivity — order through Metav Werkzeuge or consult our specialists for application advice. ADMT080308R-F56 WKP35G – Tiger·tec Gold-coated milling indexable insert (Parallelogram 85°) by Walter Tools The ADMT080308R-F56 WKP35G is a parallelogram-shaped milling indexable insert designed for efficient roughing and medium-finishing in steel and cast iron machining applications. Tiger·tec Gold coating for high tool life Optimised F56 chipbreaker for controlled chips Parallelogram 85° shape for enhanced stability Suitable for steel and cast iron machining Consistent productivity when machining steel and cast iron The combination of the WKP35G grade and Tiger·tec Gold coating provides a resilient cutting edge tailored to the thermal and abrasive conditions typical of machining P and K workpiece groups. This means fewer indexings and longer operational cycles, which translates into measurable gains in process efficiency. The insert’s geometry delivers a dependable engagement angle that supports stable cutting forces and helps to maintain component tolerances during extended runs. Controlled chip formation and longer tool life The F56 chipbreaker is engineered to produce short, manageable chips across a range of feeds and depths, improving chip evacuation and reducing rework risks. The coating system offers enhanced wear resistance and edge stability under cyclic loads, lowering the frequency of tool changeovers. As a result, cycle times are optimised and operating costs per part are reduced while surface quality remains consistent. Practical geometry for robust clamping and easy handling The parallelogram form with an 85° main cutting face and a 15° clearance angle supports predictable cutting behaviour and good fixture compatibility in many face and shoulder milling cutters. The 0.8 mm corner radius balances strength and profile fidelity for common roughing and semi-finishing tasks. Technical support and specification matching are available from Metav Werkzeuge for integration into existing toolholders and machining strategies, ensuring quick adoption on the shop floor. Contact Metav Werkzeuge for tailored application advice and to source Walter Tools inserts with Tiger·tec Gold coating — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT080308R-F56-WKP35G-WALTER SKU: ADMT080308R-F56-WKP35G-WALTER Product type: Fräswendeschneidplatte / milling indexable insert Manufacturer: Walter Tools Grade: WKP35G Series: Tiger-tec Gold Core data Clearance angle: 15° Corner radius: 0.8 mm Insert size code: 08 Thickness code: 03 Shape angle: Parallelogram 85° Special features Coating: Tiger·tec Gold Chipbreaker: F56 Material class: P / K (steel and cast iron) Tolerance class: M Execution: T FAQ What materials is this insert suited for? The ADMT080308R-F56 WKP35G from Walter Tools is specified for P (steel) and K (cast iron) workpiece groups according to the grade’s design characteristics. How does the F56 chipbreaker affect machining? The F56 chipbreaker on the ADMT080308R-F56 WKP35G improves chip control and evacuation, producing short chips that ease handling and reduce the risk of re-cutting, which benefits cycle consistency. Is the insert compatible with standard ADMT 08 toolholders? The insert’s ADMT080308R-F56 designation corresponds to the common ADMT 08 indexable family and is intended for holders that accept the ADMT0803 format; verification with the chosen toolholder is recommended. What performance benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WKP35G grade enhances wear resistance and edge robustness under typical steel and cast iron cutting conditions, extending effective tool life and stabilising machining results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
ADMT080308R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of a high-performance, coated carbide solution that combines consistent tool life and reliable chip control for productive milling of steel and cast iron; order through Metav Werkzeuge or consult their technical team for application-specific advice. ADMT080308R-F56 WKP35S milling insert, parallelogram 85° for steel and cast iron — Walter Tools The ADMT080308R-F56 WKP35S is a coated carbide milling insert engineered for heavy-duty and finishing operations in steel and cast iron, offering stable cutting behaviour and reliable repeatability in industrial machining. Tiger·tec Silver coated carbide WKP35S Parallelogram 85° form for flexible indexing F56 chipbreaker for controlled swarf formation 15° relief angle and 0.8 mm corner radius Consistent, high-productivity machining for steels and cast iron The Tiger·tec Silver WKP35S grade combines a coated carbide substrate with a tailored surface finish to balance wear resistance and toughness, which translates into predictable tool life during continuous milling. Designed for the demands of group P (steel) and group K (cast iron) according to ISO categorisation, this insert provides wear control under the heat and abrasion typical of these materials. As a result, process planners can expect fewer tool changes and improved machine uptime, which supports higher throughput without sacrificing surface quality. Stable cutting performance and improved process security The F56 chipbreaker geometry promotes short, consistent chips and reduces the risk of built-up edge, while the parallelogram 85° plate form enables multiple indexing positions for economical use of each insert. Combined with the 15° relief, this geometry reduces cutting forces and enhances engagement stability. These design choices make the insert suited to varying depths of cut and feed rates, offering machinists a robust option for both roughing and semi-finishing strategies where process security and repeatability are required. Practical design details that reduce machining time A 0.8 mm corner radius and the plate thickness provide a compromise between edge strength and fine surface generation, allowing for both moderate finishing cuts and demanding material removal when required. The medium tolerance class (M) ensures consistent fit in standard toolholders, helping to maintain concentricity and minimise vibration. Overall, the combination of grade, chip control, and geometric features reduces rework and supports streamlined set-up procedures on series production or job-shop environments. Shop-floor benefits and application advice Thanks to the coated carbide technology and dedicated chipbreaker, the insert supports reliable machining across a broad range of steels and cast irons, including alloyed grades commonly used in industrial components. The insert’s multi-edge indexing and stable edge behaviour make it a cost-effective choice for both batch and continuous operations. For best results, pair the insert with a matching Walter Tools milling cutter body rated for parallelogram-form inserts and adapt cutting parameters to the workpiece material and machine capability to fully exploit the Tiger·tec Silver advantages. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Silver inserts and to confirm stock and delivery options Technical data SKU: ADMT080308R-F56-WKP35S-WALTER Designation: ADMT080308R-F56 WKP35S Product type: Milling insert Manufacturer: Walter Tools Numeric specifications Plate size: 08 Plate thickness: 03 Relief angle: 15° Corner radius: 0.8 mm Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Design & features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Material applicability: Steel (P), Cast iron (K) Execution: T Suitable for roughing and semi-finishing operations FAQ What materials is this insert designed for? The ADMT080308R-F56 WKP35S insert is intended for machining steel (group P) and cast iron (group K) using the Tiger·tec Silver coated carbide grade. How does the F56 chipbreaker affect machining? The F56 chipbreaker on this Walter Tools insert promotes short, controllable chips and reduces built-up edge formation, improving surface finish and process stability. Is the insert suitable for finishing passes? Yes, the 0.8 mm corner radius and the insert geometry allow for semi-finishing and finishing cuts where a balance of edge strength and surface quality is needed. How many effective cutting edges are available per insert? The parallelogram 85° form and indexed design permit multiple repositions of the cutting edge, extending usable life per insert and improving overall economy. Which series and coating technology does this insert use? This insert belongs to the Tiger·tec Silver series and uses the WKP35S coated carbide grade for enhanced wear resistance and toughness. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and indicate no affiliation with our company. The offered article is an original, factory-new product from the manufacturer.
ADMT080308R-F56 WSM35G Tiger-tec Gold Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold technology and the WSM35G coated carbide grade for secure chip control and long tool life when machining stainless steels and heat‑resistant superalloys; order directly via Metav Werkzeuge or consult the specialists for application support. ADMT080308R-F56 WSM35G milling indexable insert — Tiger·tec Gold coated, for stainless steel and superalloys | Walter Tools The ADMT080308R-F56 WSM35G is a parallelogram 85° milling insert with a 15° clearance angle, engineered for productive machining of rostfreier Stahl and heat‑resistant superalloys and titanium. Tiger·tec Gold coated carbide grade WSM35G Designed for stainless steel and superalloys Parallelogram 85° form with 15° clearance Reliable cutting on difficult-to-machine alloys The WSM35G grade, part of the Tiger·tec Gold family, combines a coated carbide substrate with a multilayer surface treatment to improve thermal resistance and edge stability. This makes the insert particularly suited to materials classified as M (rostfreier Stahl) and S (heat‑resistant superalloys and titanium) under ISO 513. The result is more consistent chip formation and fewer built‑up edges during medium to high material removal, supporting stable cycle times and predictable tool life. Geometry that stabilises the cut and reduces rework A parallelogram 85° form paired with a 15° clearance angle provides axial and radial strength while enabling secure seating in milling cutters. The 0.8 mm corner radius improves edge endurance and helps absorb occasional micro‑impacts, reducing the risk of premature edge breakage. These geometric choices translate directly into fewer interrupted cuts, improved surface finish and reduced secondary processing. Chip control and process security for industrial production The F56 chipbreaker is tuned to promote short, controllable chips when cutting sticky or work‑hardening materials. Combined with the WSM35G coating, chip evacuation is improved, lowering the chance of chip re-cutting and tool damage. For operations focused on throughput and repeatability, this combination supports higher process stability and consistent part quality across shifts. Practical specification guidance for tool selection The insert is offered in the ADMT080308R‑F56 footprint and is classified in tolerance M, suitable for robust mounting and reliable indexability. Thickness is indicated as 03, and the nominal plate size is 08, enabling compatibility checks against matching cutter bodies. When integrating this insert into a milling tool, selecting a holder that secures the parallelogram form and locates the seat accurately will preserve the designed cutting geometry and deliver the expected performance. For application advice on the Walter Tools Tiger·tec Gold WSM35G inserts or to discuss the best insert geometry for a specific rostfreier Stahl or superalloy task, contact Metav Werkzeuge for tailored recommendations and quick delivery. Technical Data Article number: ADMT080308R-F56-WSM35G-WALTER Designation: ADMT080308R-F56 WSM35G Brand: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 15° Corner radius: 0.8 mm Plate size: 08 Thickness: 03 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Plate form: Parallelogram 85° Chipbreaker: F56 Material suitability: S / M Execution: T FAQ What materials is this insert intended for? The ADMT080308R‑F56 WSM35G insert is designed primarily for rostfreier Stahl (M) and for heat‑resistant superalloys and titanium (S), reflecting the properties of the WSM35G grade. What benefits does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSM35G grade increases thermal resistance and edge robustness, improving tool life and chip control when machining demanding alloys. How does the geometry affect machining stability? The parallelogram 85° form with a 15° clearance angle and a 0.8 mm corner radius provides mechanical strength and edge support, which reduces the risk of edge chipping and improves surface finish. Is this insert suitable for high‑speed milling? The coated carbide grade and the F56 chipbreaker are engineered to support elevated cutting conditions; final cutting parameters should be set according to machine capability and workpiece properties. Which cutter bodies are compatible with this insert? The insert matches cutter bodies and toolholders that accept the ADMT080308R‑F56 geometry and support a parallelogram 85° insert form; compatibility should be verified against the holder's seating and clamping design. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanation only and does not imply any affiliation between our company and those manufacturers.
ADMT080308R-F56 WSM35S WSM35S Wendeplatten - Walter Tools
Benefit from the combination of proven Tiger·tec Silver coating, reliable chip control and a robust corner geometry for uninterrupted production; order the ADMT080308R-F56 WSM35S milling insert directly via Metav Werkzeuge or ask our consultants for application advice. ADMT080308R-F56 WSM35S milling insert for stainless steels and superalloys — Walter Tools The ADMT080308R-F56 WSM35S is a coated carbide indexable insert optimised for milling stainless steels and heat‑resistant superalloys and titanium, combining thermal stability and secure chip formation for demanding production environments. Tiger·tec Silver coated carbide F56 chipbreaker for secure chip control 0.8 mm corner radius for robust edges Optimised for stainless and superalloys Reliable performance for challenging materials The Tiger·tec Silver coating and the WSM35S grade provide a balance of hardness and toughness that supports stable cutting when machining stainless steels and heat‑resistant materials. This results in consistent tool life and predictable wear behaviour, which reduces the need for frequent tool changes. For operations where heat builds up and built‑up edge is likely, the coated carbide composition helps maintain a sharp cutting edge and lowers the risk of edge failure, improving overall process reliability. Stable chip control to reduce downtime Equipped with the F56 chipbreaker, the insert enables controlled chip formation across a wide range of feeds and depths of cut. Predictable chips minimise interruptions at the machine and decrease the load on chip evacuation systems. The combination of geometry and chipbreaker design is particularly effective when processing ductile, work‑hardening stainless steels, where poor chip control would otherwise cause frequent stoppages and manual intervention. Robust cutting edge for extended service life A 0.8 mm corner radius and the parallelogram 85° seat geometry contribute to a resilient cutting edge that resists chipping under intermittent or heavy engagement. The 15° relief angle supports edge stability while allowing for effective cutting action on demanding alloys. These features translate into fewer indexings and a reduced tooling footprint over production cycles, supporting higher productivity and lower tooling consumption. Seamless integration into standard milling toolholders The insert size and shape are compatible with common milling bodies that accept parallelogram inserts; this allows straightforward replacement and fast set‑up during tool changes. Material suitability markings for groups M (stainless steels) and S (heat‑resistant superalloys and titanium) help planners select the correct grade for job orders, simplifying tool management and reducing trial phases when introducing new components to production. Contact Metav Werkzeuge for tailored application support and recommendations on Walter Tools inserts, including process parameters and suitability checks: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: ADMT080308R-F56-WSM35S-WALTER Designation: ADMT080308R-F56 Grade: WSM35S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Thickness: 03 Size: 08 Relief angle: 15° Corner radius: 0.8 mm Tolerance class: M Special features Coating / grade: Tiger·tec Silver / WSM35S (coated carbide) Chipbreaker: F56 Insert form: Parallelogram 85° Material suitability: stainless steels (M), superalloys and titanium (S) Execution: T FAQ What materials is this insert suitable for? The ADMT080308R-F56 WSM35S insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), offering thermal stability and controlled chip formation. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes secure chip control and consistent chip shape during milling, reducing machine stoppages and improving chip evacuation when processing ductile or heat‑sensitive materials. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WSM35S grade enhances wear resistance and edge durability under elevated temperatures, which supports longer tool life and steadier surface finish in demanding operations. Can this insert be used in standard parallelogram milling holders? Yes, the insert’s parallelogram 85° form is compatible with common milling toolholders designed for this geometry, enabling straightforward replacement and set‑up. What corner radius is available and why does it matter? This grade features a 0.8 mm corner radius, which strengthens the cutting edge against chipping and is beneficial for interrupted cuts and heavy engagement operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer Walter Tools.
ADMT080308R-F56 WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger‑tec Gold coating and the WSP45G grade for reliable chip control and extended edge life; the robust 0.8 mm corner radius and Parallelogram 85° geometry ensure stable milling even in demanding materials. Order the ADMT080308R-F56 WSP45G milling insert directly via Metav Werkzeuge or ask our consultants if needed. ADMT080308R-F56 WSP45G milling insert — Parallelogram 85°, 15° rake (Walter Tools) ADMT080308R-F56 WSP45G is a coated indexable milling insert designed for versatile milling of steels, stainless steels and heat‑resistant superalloys Tiger‑tec Gold PVD coating Suitable for steel, stainless steel, superalloys Parallelogram 85° geometry, 15° rake 0.8 mm corner radius for cutting stability Stable chip formation for consistent machining results The Tiger‑tec Gold PVD coating in combination with the WSP45G grade produces a balance between wear resistance and edge toughness that benefits both roughing and semi‑finishing operations. The coated carbide substrate supports predictable chip control and reduced wear rates when machining steels (P), stainless steels (M) and superalloys/titanium (S). Explaining the term: PVD (physical vapour deposition) is a thin, hard layer applied to the cutting edge to improve heat resistance and reduce adhesion; this means fewer unplanned tool changes and more consistent component quality during batch production. Geometry that improves accessibility and edge strength The insert’s Parallelogram 85° geometry and 15° rake deliver a combination of good accessibility for shoulder and slot milling with an optimised cutting angle that reduces cutting forces. The 0.8 mm corner radius increases edge stability, allowing slightly higher depths of cut without premature chipping, while the compact designation (size 08, thickness 03) helps when working in tighter tool pockets. For users unfamiliar with insert dimensions: size and thickness codes indicate the insert’s nominal dimensions for matching with compatible toolholders and cutters. Economical performance through process security With a tolerance class M and the robust WSP45G composition, this insert offers process security and repeatable tool life that supports predictable cycle times. The chipbreaker F56 is tuned to promote controlled chip segmentation across a broad range of feeds, which lowers the risk of built‑up edge and improves surface finish in consecutive parts. As a result, productivity increases and scrap rates fall—advantages that quickly translate into tangible gains on the shop floor. The insert is part of Walter Tools’ Tiger‑tec Gold series, known for broad material coverage and consistent, repeatable performance. For reliable Tiger‑tec Gold performance and advice on integration into existing tool systems, contact Metav Werkzeuge — Metav’s technical team can advise on toolholder compatibility and delivery options Technical Data Article number: ADMT080308R-F56-WSP45G-WALTER Label: Fräswendeschneidplatte ADMT080308R-F56 WSP45G Walter Tools Manufacturer: Walter Tools Facts Size: 08 Thickness: 03 Corner radius: 0.8 mm Free rake angle: 15° Geometry angle: Parallelogram 85° Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WSP45G Chipbreaker: F56 Coating: PVD coated carbide Suitable for: Steel (P), Stainless steel (M), Superalloys/Titanium (S) Execution: T FAQ What materials is this insert suitable for? The ADMT080308R-F56 WSP45G insert is suitable for steel, stainless steel and heat‑resistant superalloys/titanium, thanks to the Tiger‑tec Gold PVD technology and the WSP45G grade. How does the Tiger‑tec Gold coating improve performance? Tiger‑tec Gold on the ADMT080308R-F56 WSP45G increases heat resistance and reduces adhesion on the cutting edge, resulting in better wear behaviour and more consistent tool life in demanding milling tasks. What benefit does the Parallelogram 85° geometry offer? Parallelogram 85° geometry provides good approach angles for shoulder and slot milling while maintaining edge strength; in the ADMT080308R-F56 design this supports tighter tool access and stable cutting. Is the 0.8 mm corner radius suitable for finishing? The 0.8 mm corner radius on the ADMT080308R-F56 WSP45G gives improved edge robustness for semi‑finishing and finishing when combined with appropriate feeds and speeds, reducing the likelihood of chipping. Which chipbreaker should be expected and what does it do? This insert features chipbreaker F56, which promotes controlled chip segmentation across a range of feeds to improve surface finish and reduce built‑up edge during continuous milling. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes and do not indicate any affiliation between our company and the named brands. The offered item is an original, factory‑new product of Walter Tools.
ADMT080312R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of a Tiger·tec Silver coated grade that combines wear resistance and broad material capability with a stable parallelogram 85° geometry and a chipbreaker F56 for reliable chip control; order directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. ADMT080312R-F56 WKP35S indexable milling insert — Parallelogram 85°, 15° clearance (Walter Tools, Tiger·tec Silver) ADMT080312R-F56 WKP35S is an indexable milling insert designed for productive machining of steel and cast iron, offering a coated carbide grade and robust chip control for mixed finishing and medium-duty roughing operations. Tiger·tec Silver coating technology Grade WKP35S for steel and cast iron Parallelogram 85° geometry for stable cutting 1.2 mm corner radius, 15° clearance angle Maximise process efficiency with a coated carbide grade built for steel and cast iron The combination of Tiger·tec Silver coating and the WKP35S grade delivers a balance of thermal resistance and wear protection, specifically optimised for machining steel (P) and cast iron (K). The coated carbide composition reduces flank wear under the typical heat loads of steel turning and milling, which translates into longer tool life and fewer index changes. For production environments where predictable tool performance is essential, this insert supports consistent cycle times and reduced downtime, helping to maintain throughput on both unmanned shifts and busy cell lines. Geometry and chip control that improve surface finish and stability The parallelogram 85° form combined with a 15° clearance angle and 1.2 mm corner radius provides mechanical rigidity and favourable engagement angles during milling, which reduces vibration and improves surface quality. The integrated chipbreaker F56 is tuned for controlled chip formation when cutting mixed components, preventing chip nests and enhancing evacuation in both long and short-chip conditions. These geometric features result in stable cutting behaviour, allowing higher material removal rates with predictable edge life and improved dimensional repeatability. Practical selection and in-process advantages for everyday workshop use Available in size 08 with a plate thickness of 03 and manufactured to tolerance class M, this insert suits a wide range of milling holders and clamping systems. The insert’s combination of grade and geometry makes it suitable where both finishing and moderate roughing passes are required on steel and cast iron components. For users uncertain about clamping options or the best chipbreaker for a specific cycle, Metav Werkzeuge provides application advice and can help match the insert to suitable cutter bodies and process parameters to ensure optimal productivity and tool economy. Contact Metav Werkzeuge for tailored recommendations on Walter Tools ADMT080312R-F56 WKP35S inserts, application guidance and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT080312R-F56-WKP35S-WALTER Item: ADMT080312R-F56 WKP35S indexable milling insert Manufacturer: Walter Tools Facts Corner radius: 1.2 mm Clearance angle: 15° Insert size: 08 Plate thickness: 03 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F56 Geometry: Parallelogram 85° Material application: Steel (P) and Cast iron (K) Execution: T FAQ Which materials is this insert designed for? The ADMT080312R-F56 WKP35S insert is formulated for machining steel (P) and cast iron (K); the Tiger·tec Silver coating and WKP35S grade are optimised for the thermal and abrasive conditions typical of these material groups. What cutting tasks suit the chipbreaker F56? Chipbreaker F56 provides controlled chip formation for a range of finishing to medium roughing operations and helps maintain stable evacuation when machining mixed components with varying chip characteristics. How does the parallelogram 85° geometry benefit production? The parallelogram 85° shape increases cutting edge support and reduces undesirable deflection, improving surface finish and repeatability during milling cycles, which is especially beneficial in serial production. Can Metav Werkzeuge advise on holder compatibility and process parameters? Yes — Metav Werkzeuge offers application support and can advise on suitable cutter bodies, clamping systems and process settings for the ADMT080312R-F56 WKP35S insert to optimise tool life and productivity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080312R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of high-temperature resistance, stable chip control and precise geometry for consistent milling results; order directly via Metav Werkzeuge or request advice from our consultants if needed. ADMT080312R-F56 WSM35G – Walter Tools milling indexable insert, Tiger·tec Gold for rostfreier Stahl and superalloys, 15° clearance The ADMT080312R-F56 WSM35G is a parallelogram 85° milling insert designed for demanding roughing and semi-finishing tasks in rostfreier Stahl and heat-resistant superalloys *Tiger·tec Gold coating for high temperature resistance *Suitable for rostfreier Stahl and superalloys *Parallelogram 85° form for versatile milling *15° clearance and 1.2 mm corner radius Maximise cutting performance with a heat-resistant coating The insert's Tiger·tec Gold surface treatment and WSM35G grade combine to deliver improved thermal stability and wear resistance when machining difficult-to-cut alloys. Coated cemented carbide technology reduces adhesion and supports a stable chip formation, which lowers the risk of built-up edge and preserves the cutting edge over longer production runs. For operations where temperature and workhardening challenge tool life, this combination provides a reliable balance between aggressive metal removal and predictable consumable intervals. Geometry that reduces cutting forces and improves tool life The parallelogram 85° format and a 15° clearance angle create a favourable cutting geometry for both face and shoulder milling. The 1.2 mm corner radius contributes to edge robustness and distributes cutting loads to avoid premature chipping during interrupted cuts. These geometry choices result in consistent component quality, a controlled surface finish and reduced tool-change frequency—advantages that translate into fewer process disruptions and higher throughput on the shop floor. Designed for process reliability in production environments Developed for applications in ISO groups M (rostfreier Stahl) and S (superalloys/titanium), this insert supports manufacturers who require repeatable results when machining high-alloy parts. The integrated F56 chipbreaker promotes controllable chips and eases swarf handling, which helps maintain machine uptime. Combining predictable wear behaviour with a stable cutting edge, the insert suits production-focused milling tasks where efficiency, reproducibility and component quality are priorities. For demanding rostfreier Stahl and superalloy milling tasks, consult Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ADMT080312R-F56-WSM35G-WALTER Designation: ADMT080312R-F56 WSM35G Manufacturer: Walter Tools Type: Milling indexable insert Facts Clearance angle: 15° Corner radius: 1.2 mm Plate form: Parallelogram 85° Plate size: 08 Plate thickness: 03 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WSM35G Chipbreaker: F56 Material suitability: rostfreier Stahl (M), Superalloys/Titan (S) Series: Tiger-tec Gold Execution: T FAQ Which materials is this insert best suited for? The ADMT080312R-F56 WSM35G insert is optimised for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), delivering improved edge life under high temperatures. Can the insert handle interrupted cuts and heavy milling? Yes, the combination of the 1.2 mm corner radius and the parallelogram 85° form provides edge robustness and load distribution suitable for interrupted cutting and semi-heavy milling operations. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold increases thermal resistance and wear performance, enabling the insert to maintain a stable cutting edge during long cycles when machining high-alloy materials. Is the chip control suitable for automated production cells? The F56 chipbreaker promotes predictable chip formation, which supports swarf management and reduces the risk of chip-related interruptions in automated machining processes. Which toolholders fit this indexable insert form? The parallelogram 85° geometry is compatible with toolholders designed for ADMT-style inserts; consult Metav Werkzeuge for matching holder recommendations and clamping specifications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ADMT080312R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, stable chip control and versatile material capability for reliable milling cycles; order the ADMT080312R-F56 WSP45G directly via Metav Werkzeuge or contact our consultants for application support. ADMT080312R-F56 WSP45G milling insert (Tiger‑tec Gold) by Walter Tools — for Stahl, rostfreier Stahl and superalloys The ADMT080312R-F56 WSP45G is a parallelogram milling insert engineered for productive side and face milling of Stahl, rostfreier Stahl and heat-resistant superalloys in demanding production environments. Tiger‑tec Gold PVD coating Versatile for Stahl, rostfreier Stahl, superalloys Parallelogram 85° geometry, 15° clearance Corner radius 1.2 mm for increased edge strength Engineered coating for extended cutting intervals The combination of the Tiger‑tec Gold surface treatment and the WSP45G carbide grade delivers a measurable increase in tool life and repeatable performance under continuous operation. The PVD-based PVD coating resists thermal and abrasive wear, which reduces flank wear and supports consistent component tolerances over longer tool life. For production planners this translates into fewer indexings, lower tooling consumption and reduced downtime between tool changes — improving line efficiency without sacrificing surface finish. Stable chip formation and process security across materials Designed for the ISO P/M/S material groups, this insert supports machining of unalloyed and alloyed Stahl, tougher rostfreier Stahl and heat-resistant alloys or titanium. The integrated chipbreaker F56 promotes controlled chip formation, reducing rework risks and facilitating safe evacuation even at elevated cutting temperatures. The result is predictable material removal rates and improved surface integrity when milling parts that demand high reproducibility. Geometry that improves access and edge life The parallelogram, 85° approach geometry combined with a 15° relief angle gives a good balance between cutting engagement and radial force management, making the insert suitable for shoulder milling and face milling tasks. The corner radius 1.2 mm improves edge stability under interrupted cuts and supports increased edge strength, while the standard thickness 03 provides robustness for heavier engagements. These geometric choices help maintain dimensional stability on critical features while enabling productive cutting parameters. Practical integration for production systems The insert is available in the ADMT080312R-F56 designation, matching common toolholders for indexable milling operations. The compact shape and proven coating technology make it straightforward to substitute into existing tool cycles where improved chip control and wear resistance are required. Specification data such as tolerance class M and the WSP45G grade enable reliable process planning and repeatable tool life estimation for batch production and job-shop environments. For tailored cutting data, availability checks and application advice, contact Metav Werkzeuge — our specialists will advise on the Walter Tools ADMT080312R-F56 WSP45G milling insert and confirm suitability for the specific Stahl or rostfreier Stahl application Technical data Article number: ADMT080312R-F56-WSP45G-WALTER Designation: ADMT080312R-F56 WSP45G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger‑tec Gold Facts Relief angle: 15° Corner radius: 1.2 mm Plate size: 08 Thickness: 03 Approach angle: 85° Tolerance class: M Special features Grade: WSP45G (coated carbide) Coating technology: Tiger‑tec Gold (PVD) Chipbreaker: F56 Geometry: Parallelogram 85° Execution: T Material suitability: P / M / S Purpose: milling insert for productive machining FAQ What materials is this insert suitable for? The ADMT080312R-F56 WSP45G insert is suitable for Stahl, rostfreier Stahl and heat-resistant superalloys (ISO groups P, M, S) thanks to the WSP45G grade and Tiger‑tec Gold coating. How does the chipbreaker F56 affect machining? The chipbreaker F56 promotes consistent chip formation and evacuation; when paired with the WSP45G grade this improves process security and reduces the risk of built-up edge on rostfreier Stahl. What is the advantage of the parallelogram 85° geometry? The 85° parallelogram geometry reduces radial cutting forces and improves access for shoulder and face milling operations, helping to maintain dimensional stability on critical features. Can this insert handle interrupted cuts and heavier engagements? Yes. The corner radius of 1.2 mm and the robust thickness provide enhanced edge strength and resistance to fracture during interrupted cuts and higher material removal rates. Which coating technology is used and why does it matter? The Tiger‑tec Gold PVD coating on the WSP45G grade enhances thermal and abrasive wear resistance, contributing to longer tool life and more consistent surface finish across production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080316R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of longer tool life and reliable chip control to improve milling productivity; order directly via Metav Werkzeuge or contact our consultants for application advice. ADMT080316R-F56 WKP35S milling insert — Tiger-tec Silver, parallelogram 85° The ADMT080316R-F56 WKP35S is a coated milling insert designed for productive steel and cast iron machining, offering controlled chip formation and stable cutting performance. Tiger-tec Silver for enhanced tool life F56 chipbreaker for controlled chips Parallelogram 85° for stable engagement Suitable for steel and cast iron machining Enhanced uptime through advanced coating and grade The combination of the Tiger-tec Silver coating and the WKP35S grade delivers a notable improvement in abrasive and thermal resistance for coated carbide applications. This results in more consistent edge life under varying cutting conditions and reduces the frequency of tool changes, which supports uninterrupted production cycles. The coated carbide composition is optimised for the typical heat and chip behaviour encountered when machining steel, allowing for sustained high-clock productivity without compromising surface finish. Accurate engagement and predictable chip behaviour The parallelogram 85° geometry and the dedicated F56 chipbreaker provide a measured cutting engagement that stabilises the cutting edge and promotes short, segmenting chips when machining cast iron and steel. The 15° relief angle and a 1.6 mm corner radius combine to balance strength and sharpness, so each indexable edge gives a reliable cutting profile. These design elements reduce vibration and improve repeatability, meaning fewer rejects and a more predictable machining process. Practical benefits for workshop efficiency With a compact plate format (size 08, thickness 03) and tolerance class M, the insert supports accurate indexation and straightforward changeover routines. The classification for P / K materials means the insert is specified for unalloyed/low-alloy steels and various forms of cast iron, aiding versatility across many production tasks. The overall specification emphasises operational efficiency: stable chip formation, consistent surface quality and a carbide grade that resists abrasive wear, which together contribute to lower cost per part and a more productive tool inventory. Contact Metav Werkzeuge today for project-matched recommendations on the Tiger-tec Silver ADMT080316R-F56 WKP35S insert and for delivery or technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: ADMT080316R-F56-WKP35S-WALTER Article designation: ADMT080316R-F56 WKP35S Series: Tiger-tec Silver Grade: WKP35S Manufacturer: Walter Tools Core figures Relief angle: 15° Corner radius: 1.6 mm Plate size: 08 Plate thickness: 03 Tolerance class: M Materials & features Applicable material groups: P (steel), K (cast iron) Chipformer / chipbreaker: F56 Plate shape: Parallelogram 85° Execution: T FAQ What materials is this insert suitable for? The ADMT080316R-F56 WKP35S is specified for steel (P) and cast iron (K) applications and is optimised for the thermal and abrasive conditions typical of those groups. How does the Tiger-tec Silver coating benefit production? The Tiger-tec Silver coating enhances wear resistance and thermal stability, extending the service life of the insert and supporting consistent surface quality during extended runs. What chip control can be expected from the F56 breaker? The F56 chipbreaker produces short, controlled chips in steels and many cast irons, improving evacuation and reducing the risk of built-up edge or re-cutting. Is the insert suitable for heavy roughing? With a 1.6 mm corner radius and a robust parallelogram geometry, the insert offers good edge strength for demanding roughing, while still providing finish-capable edges when indexation is required. How is tool repeatability assured? The plate’s tolerance class M and standardised dimensions ensure precise positioning and repeatable cutting geometry when indexed or replaced. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names are used solely for description and identification purposes. The offered item is an original, factory-new product from the stated manufacturer.
ADMT080316R-F56 WSM35G T Wendeplatten - Walter Tools
The combination of Tiger·tec Gold wear resistance, the WSM35G grade and the F56 chipbreaker delivers reliable cutting performance in demanding materials; predictable chip formation and a 15° clearance angle reduce downtime and support consistent part quality. Order the ADMT080316R-F56 WSM35G directly via (Metav Werkzeuge) or ask our consultants if needed. ADMT080316R-F56 WSM35G milling insert — Tiger·tec Gold, 15° clearance (Walter Tools) ADMT080316R-F56 WSM35G is a parallelogram 85° milling insert engineered for machining rostfreier Stahl and heat‑resistant superalloys, offering a coated carbide grade optimised for stable cutting in challenging alloys. *Tiger·tec Gold coating for extended tool life *Stable chip control with chipbreaker F56 *15° clearance for secure cutting *Parallelogram 85° form for positive milling Engineered for tough alloys and rostfreier Stahl This insert’s WSM35G carbide grade, combined with the Tiger·tec Gold coating, is designed for machining rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S). The coating improves heat resistance and reduces flank wear, which supports longer tool life and consistent dimensional results when cutting materials that tend to work‑harden or generate high cutting temperatures. In practice, these properties help to limit build‑up on the cutting edge and maintain cutting performance over longer cycles, reducing tool changes and stabilising production. Predictable chip formation and process security The integrated chipbreaker F56 and the parallelogram 85° plate geometry support controlled chip separation and evacuation when milling difficult materials. Combined with the 15° clearance, the geometry reduces rubbing and favours a stable cutting edge under heavy thermal load. The 1.6 mm corner radius provides strength at the cutting edge for interrupted cuts and roughing passes while preserving surface integrity. These factors contribute to increased process security and reproducible results across batch runs. Practical integration and tooling guidance As an indexable milling insert in size 08 with thickness code 03 and tolerance class M, the component fits conventional Walter Tools cutter bodies that accept the ADMT‑form inserts. The insert’s parallelogram outline yields positive cutting angles beneficial for face and shoulder milling operations. For new applications, start with conservative feeds and progressively increase to determine the optimal balance between surface finish and productivity; technical data sheets from Walter Tools and Metav Werkzeuge can provide recommended cutting windows for specific machines and workpiece conditions. Life cycle advantages and operational benefits Using a coated grade such as WSM35G reduces wear rate and supports longer edge life compared with uncoated grades when machining high‑temperature alloys. The insert’s design focuses on stable chip control and edge integrity, which decreases scrap risk and increases uptime. Paired with correct clamping and coolant strategies, this solution improves overall process economics by extending insert life and delivering consistent component quality under demanding cutting conditions. For tailored recommendations and availability of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or phone +49 2822 7131930. Technical data Article number: ADMT080316R-F56-WSM35G-WALTER Designation: ADMT080316R-F56 WSM35G Manufacturer: Walter Tools Series: Tiger-tec Gold Core specifications Relief angle: 15° Corner radius: 1.6 mm Size: 08 Thickness code: 03 Tolerance class: M Chipbreaker: F56 Special features Coating: Tiger·tec Gold Grade: WSM35G Plate shape: Parallelogram 85° Material suitability: S / M Suitable for rostfreier Stahl (M) and heat‑resistant superalloys/titanium (S) FAQ What materials is this insert suited for? The ADMT080316R-F56 WSM35G insert is formulated for rostfreier Stahl (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), offering stable cutting in materials that generate high temperatures. How does the F56 chipbreaker benefit milling operations? The chipbreaker F56 promotes regular chip segmentation and evacuation, reducing the chance of entangling chips and improving surface finish when milling difficult alloys. What is the significance of the 85° parallelogram form? The parallelogram 85° outline provides a positive cutting approach suitable for face and shoulder milling, improving accessibility and allowing for favourable cutting angles in various tool holders. Is the insert compatible with standard Walter Tools cutter bodies? Yes, the insert’s ADMT form and size 08 / thickness code 03 are intended for cutter systems that accept ADMT‑style inserts; confirmation of seat and clamping compatibility is recommended for the specific cutter body. How does the Tiger·tec Gold coating affect tool life? The Tiger·tec Gold coating enhances heat and wear resistance of the WSM35G grade, typically extending edge life and maintaining cutting stability under thermally demanding conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mark names are used for explanation of compatibility and origin only. The offered item is an original, factory‑new product of the named manufacturer (Walter Tools).
ADMT080316R-F56 WSM35S WSM35S Wendeplatten - Walter Tools
High productivity and reliable wear resistance make the ADMT080316R-F56 WSM35S a solid choice for demanding machining operations. The combination of the Tiger‑tec Silver coating and a robust geometry supports stable chip formation and extended tool life, enabling smoother production flow. Order the inserts directly via Metav Werkzeuge or consult the Metav team for application advice. ADMT080316R-F56 WSM35S – Indexable milling insert, Tiger‑tec Silver, 15° relief (Walter Tools) The ADMT080316R-F56 WSM35S is an indexable milling insert engineered for high-demand machining of stainless steels and heat‑resistant alloys, offering a wear‑resistant coating and a parallelogram seat for repeatable performance Tiger‑tec Silver coating for high wear resistance Designed for stainless steels and superalloys Parallelogram 85° shape for secure seating 1.6 mm corner radius, 15° relief angle Consistent edge life for tough materials The WSM35S grade, part of the Tiger‑tec Silver series, is a coated carbide designed specifically to handle the elevated temperatures and work‑hardening tendencies of stainless steels and heat‑resistant alloys. The coating improves heat resistance and reduces abrasive wear, which translates into longer edge life and fewer insert changes in series production. By stabilising the cutting edge and encouraging predictable chip formation, the insert supports higher cutting data where machining demands process security and repeatability. Geometry that secures the process and reduces downtime With a parallelogram 85° form and a 15° relief angle, the geometry of the insert ensures firm seating and a well‑defined cutting kinematic. The 1.6 mm corner radius balances robustness and surface finish, helping to absorb cutting forces without sacrificing the finish quality. These design choices reduce the frequency of interruptions for insert indexing and make the grade suitable for applications where tool life and component quality are equally critical. Practical advantages for workshop planning and productivity The combination of a proven coating technology and a purpose‑built chipbreaker provides stable chip control, which reduces the risk of built‑up edge and unexpected tool failure during heavy or interrupted cuts. The insert’s compatibility with standard milling cutter bodies and its clear ISO material group suitability (M and S) simplify process planning and tool selection. For production environments seeking to increase uptime and maintain consistent results, this solution offers measurable gains in both productivity and component quality. For reliable machining of stainless steels and superalloys, contact Metav Werkzeuge for Walter Tools ADMT080316R-F56 WSM35S inserts and application support via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: ADMT080316R-F56-WSM35S-WALTER Designation: ADMT080316R-F56 Product type: Indexable milling insert Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 1.6 mm Plate size: 08 Thickness code: 03 Tolerance class: M Plate form: Parallelogram 85° Special features Series: Tiger‑tec Silver Grade: WSM35S Chipbreaker: F56 Material suitability: stainless steels (M), heat‑resistant alloys / titanium (S) FAQ What materials is this insert suitable for? The ADMT080316R-F56 WSM35S insert is specified for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), reflecting the grade’s heat‑resistant and wear‑resistant properties. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the WSM35S grade increases thermal resistance and reduces abrasive wear, which contributes to longer tool life and more consistent cutting performance under elevated temperatures. What is the advantage of the parallelogram 85° shape? The parallelogram 85° geometry provides a secure, repeatable seat in the cutter body, improving positional stability and enabling reliable indexability during production cycles. Which chipbreaker is fitted and what does it do? This insert uses the F56 chipbreaker, a configuration optimised for controlled chip formation in tough materials, reducing the risk of built‑up edge and improving surface integrity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080316R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and a defined F56 chipbreaker for consistent chip control and extended tool life; the result is reliable, productive milling across steel, rostfreier Stahl, and heat-resistant alloys. Order the ADMT080316R-F56 WSP45G directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. ADMT080316R-F56 WSP45G — Fräswendeschneidplatte by Walter Tools (Tiger·tec Gold, chipbreaker F56) The ADMT080316R-F56 WSP45G is a parallelogram milling insert designed for versatile milling tasks, combining a wear-resistant PVD coating with a geometry optimised for stable chip formation in demanding materials. Tiger·tec Gold PVD coating Suitable for Stahl, rostfreier Stahl, and superalloys Parallelogram 85° geometry for axial engagement F56 chipbreaker for stable chips and surface quality Longer tool life and consistent wear resistance with Tiger·tec Gold The PVD-coated Tiger·tec Gold grade WSP45G provides a balanced combination of toughness and thermal stability, making it appropriate for a wide range of milling tasks. As a coated cemented carbide grade, it manages heat and abrasive wear better than uncoated grades, which translates into longer intervals between indexings and fewer tool changes. This behaviour is particularly advantageous in serial production, where predictable flank wear and repeatable performance reduce setup time and scrap rates. The material suitability designation P / M / S signals that this insert handles conventional steels, rostfreier Stahl, and even heat-resistant superalloys or titanium, so the same indexable solution may be applied across mixed production lots. Geometry that improves chip control and surface finish The insert’s parallelogram 85° shape and integrated F56 chipbreaker are designed to deliver controlled chip formation during shoulder milling and light ramping operations. A 15° clearance angle supports shearing action while protecting the cutting edge from rubbing, and the 1.6 mm corner radius enhances edge strength where intermittent engagement or higher feed rates are used. These geometric choices combine to reduce vibration sensitivity and help achieve consistent surface quality, meaning fewer rework steps and a more predictable machining cycle time for production shops and subcontractors alike. Process security, tolerance class and shop-floor productivity With a tolerance class of M and the characteristic robustness of a Walter Tools grade, this milling insert supports stable cutting conditions and repeatable positioning in multi-insert cutters. The execution code T and the plate thickness and size coding ensure compatibility with standard tooling systems that accept the ADMT080316R series. For operations where batch consistency and uptime matter, the insert’s balance of toughness and coating performance helps secure process windows and reduces the likelihood of unexpected tool failure. For abrasive or heat-prone workpieces, the grade’s technology aids in maintaining edge integrity over longer cycles, supporting more efficient use of machine time and operator oversight. Contact Metav Werkzeuge for tailored advice on Walter Tools inserts, quoting SKU ADMT080316R-F56-WSP45G-WALTER, or to discuss optimisation for specific materials; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data SKU: ADMT080316R-F56-WSP45G-WALTER Designation: ADMT080316R-F56 WSP45G Series: Tiger-tec Gold Product type: Fräswendeschneidplatte Grade: WSP45G Brand: Walter Tools Execution: T Tolerance class: M Facts Clearance angle: 15° Corner radius: 1.6 mm Plate thickness designation: 03 Plate size designation: 08 Plate form angle: 85° Special features Coating: Tiger·tec Gold (PVD) Chipbreaker type: F56 Suitable for: steel (P), rostfreier Stahl (M), superalloys / titanium (S) Shape: Parallelogram 85° Series description: coated cemented carbide, versatile milling grade FAQ Which materials can be machined with this insert? The ADMT080316R-F56 WSP45G by Walter Tools is specified for P / M / S applications — that is, steel, rostfreier Stahl, and heat-resistant superalloys or titanium — and performs well where toughness and thermal resistance are required. What machining tasks is the geometry best suited to? The parallelogram 85° form combined with the F56 chipbreaker is especially effective for shoulder milling and general face milling where controlled chip flow and good surface finish are priorities. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold increases wear resistance and thermal stability, which reduces flank wear and extends cutting life; this supports longer unattended cycles and improved batch consistency when using the ADMT080316R-F56 WSP45G. Is the insert suitable for high-feed operations? The combination of a 1.6 mm corner radius and the F56 chipbreaker provides robustness under higher feed rates, making the insert appropriate for a range of feed conditions within its recommended application envelope. What does the tolerance class M mean for the user? Tolerance class M indicates a standard precision fit for indexable inserts, ensuring consistent seat and repeatable positioning in compatible toolholders and contributing to process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080320R-F56 WKP35S WKP35S Wendeplatten - Walter Tools
High-performance milling with Tiger·tec Silver and robust WKP35S grade delivers stable cutting and consistent tool life; the parallelogram 85° form and 2 mm corner radius improve engagement control. Order the ADMT080320R-F56 WKP35S milling indexable insert directly via Metav Werkzeuge or ask our consultants if needed. ADMT080320R-F56 WKP35S milling indexable insert for steel and cast iron — Walter Tools The ADMT080320R-F56 WKP35S is a parallelogram 85° milling indexable insert designed for efficient, high‑performance machining of steel and cast iron. Tiger·tec Silver coating WKP35S grade for steel and cast iron Parallelogram 85° insert form Corner radius 2 mm for stability Maximise process stability and productivity with modern coating technology The combination of the Tiger·tec Silver coating and the WKP35S carbide grade is engineered for stable cutting in demanding operations. This pairing reduces flank wear and extends usable tool life, resulting in fewer indexings and less downtime. Designed for use on steel and cast iron (ISO group P and K), the insert supports predictable results in mixed‑batch production and repeatable cycle times — a clear advantage where throughput and consistency matter most. Reliable chip control and secure cutting edge for safer milling The parallelogram 85° geometry together with the chipbreaker F56 improves chip formation and evacuation during heavy and interrupted cuts. The 2 mm corner radius increases edge strength, which helps maintain dimensional accuracy under higher radial engagement. These features translate into fewer surface defects and a steadier cutting process, especially when machining tougher steels or abrasive cast‑iron grades. The insert form also facilitates controlled entry and exit, reducing vibration and offering a smoother surface finish. Clear integration and predictable tolerance for production planning With tolerance class M and standard insert dimensions, the component integrates cleanly into common milling holders and tool assemblies. The compact plate thickness and standard size designation make tool setup straightforward, supporting quick changeover and simple tool inventory management. As a Walter Tools product from the Tiger‑tec Silver series, the insert benefits from tested coating processes and material science that aim to deliver consistent wear behaviour and repeatable part quality in serial production. For application‑specific recommendations and sample cutting advice for Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — consultants are available to discuss machining parameters and compatibility with existing toolholders. Technical data SKU: ADMT080320R-F56-WKP35S-WALTER Designation: ADMT080320R-F56 WKP35S Product type: Milling indexable insert Manufacturer: Walter Tools Facts Free angle: 15° Corner radius: 2 mm Insert size: 08 Plate thickness: 03 Parallelogram angle: 85° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S Chipbreaker: F56 Applicable materials: P (steel), K (cast iron) Series: Tiger‑tec Silver Execution: T Material group: P / K FAQ Which materials is this insert suitable for? The ADMT080320R-F56 WKP35S insert is specified for ISO groups P and K, meaning it is suitable for machining various steel grades and cast iron. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and reduces thermal impact, leading to more consistent tool life and better surface quality in milling operations. How does the parallelogram 85° form affect milling performance? The parallelogram 85° geometry optimises cutting engagement and chip flow, offering improved stability and reduced vibration when performing face and shoulder milling tasks. What tolerance and dimensional repeatability can be expected? Tolerance class M indicates standard industrial accuracy and reliable repeatability suitable for production environments requiring consistent insert indexing and dimensional control. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT080320R-F56 WSM35G T Wendeplatten - Walter Tools
Take advantage of a high-performance Tiger‑tec Gold cutting grade combined with an optimised F56 chipbreaker and a precise 15° relief angle for stable, long-lasting milling of stainless steels and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult the team for process recommendations. ADMT080320R-F56 WSM35G milling insert — Tiger‑tec Gold grade for stainless steels and superalloys (Walter Tools) The ADMT080320R-F56 WSM35G is an indexable milling insert engineered for demanding turning and milling tasks on stainless steel and heat‑resistant superalloys, combining a coated‑carbide grade with a geometry that favours secure chip control and consistent cutting‑edge stability. Tiger‑tec Gold coating for thermal stability Optimised F56 chipbreaker for stable chips 15° relief angle and R2.0 corner radius Suitable for stainless steel and superalloys Durable coating and grade for reduced wear and heat damage The combination of the WSM35G grade and the Tiger‑tec Gold coating improves thermal resistance and wear performance when machining tough materials. Coated cemented carbide offers a protective layer that reduces flank wear and lowers the risk of built‑up edge, which translates into longer tool life and fewer index changes. For operations where heat generation and adhesion are critical — notably in the machining of stainless steel (ISO M) and high‑strength alloys — this grade supports sustained cutting conditions without rapid deterioration of the cutting edge. Geometry that enhances chip formation and surface quality A parallelogram 85° insert shape combined with the F56 chipbreaker promotes predictable chip formation and evacuation, reducing recutting and improving process reliability. The 15° relief angle and an R2.0 corner radius balance strength at the cutting edge with the ability to achieve acceptable surface finish; larger radii increase edge robustness, while the relief angle reduces friction against the workpiece. These geometric choices help to maintain dimensional accuracy and support consistent component quality in medium to heavy milling passes. Process efficiency and economic benefits for production Using a cutting insert designed for difficult‑to‑machine materials yields measurable process benefits: more consistent metal removal rates, fewer interrupted cycles for tool changes and improved uptime. The coated carbide grade and robust chip control reduce the frequency of secondary operations caused by poor surface finish or thermal damage. This combination typically leads to improved productivity and a favourable cost‑per‑part equation in serial production where machining stainless steels and superalloys is routine. Practical application notes and suitability The insert is specified for M (stainless steels) and S (heat‑resistant superalloys, titanium) material groups according to ISO classifications, making it suitable where material toughness and heat sensitivity demand specialised grades. The plate is provided in size code 08 with thickness code 03, and the F56 chipbreaker is optimised for controlled swarf in interrupted and continuous cuts. Installers and process planners will value the predictable performance of this insert when selecting tool families for demanding applications and when aiming for reproducible results across batches. Contact Metav Werkzeuge for tailored process advice on Tiger‑tec Gold inserts and secure the ADMT080320R-F56 WSM35G for demanding stainless steel and superalloy milling operations — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: ADMT080320R-F56-WSM35G-WALTER Designation: ADMT080320R-F56 Brand: Walter Tools Grade: WSM35G Series: Tiger‑tec Gold Facts Relief angle: 15° Corner radius: 2 Plate size: 08 Thickness code: 03 Shape angle: 85° Special features Coated carbide cutting grade Tiger‑tec Gold Chipbreaker F56 Suitable for stainless steel (M) Suitable for superalloys and titanium (S) Tolerance class M Execution: T FAQ What materials is this insert suitable for? The ADMT080320R‑F56 WSM35G insert is intended for stainless steel (ISO group M) and for heat‑resistant superalloys/titanium (ISO group S), where its Tiger‑tec Gold coating supports thermal stability. How does the F56 chipbreaker affect performance? The F56 chipbreaker on this milling insert promotes controlled chip formation and evacuation, helping to avoid long, stringy chips and to maintain a stable cutting process during the machining of tough materials. What does the R2.0 corner radius mean for machining? An R2.0 corner radius increases the cutting edge’s strength and wear resistance, which is beneficial for heavier cuts and intermittent milling where a robust edge reduces the risk of chipping. Is the insert compatible with standard parallelogram 85° toolholders? The insert’s parallelogram 85° shape is intended for toolholders and systems that accept this geometry; suitability should be confirmed against the toolholder catalogue to ensure correct seating and clamping. Which benefits does the Tiger‑tec Gold technology deliver? Tiger‑tec Gold coating provides enhanced heat resistance and improved wear behaviour, which supports longer tool life and more stable cutting edges under elevated temperatures typical of stainless steel and superalloy machining. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Brand names and trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT080320R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Reliable, long-life milling performance with the Tiger‑tec Gold PVD-coated WSP45G grade, a robust parallelogram 85° geometry and a 2 mm corner radius for stable cutting; order the insert directly via Metav Werkzeuge or contact our consultants for tailored application advice ADMT080320R-F56 WSP45G milling indexable insert — Tiger‑tec Gold, for steel/stainless/superalloys (Walter Tools) A high-performance ADMT080320R-F56 WSP45G milling indexable insert engineered for versatile face and shoulder milling of steel, stainless steel and heat‑resistant alloys Tiger‑tec Gold PVD-coated carbide grade WSP45G Designed for steel, stainless and superalloys Parallelogram 85° shape with 15° clearance 2 mm corner radius for stable cutting edge Greater material versatility with consistent edge stability The PVD‑coated Tiger‑tec Gold grade provides a balance of toughness and wear resistance, optimised for the combined challenges of chip formation and thermal loading when machining steel, stainless steel and superalloys/titanium. The WSP45G grade is formulated to resist edge breakdown under intermittent cuts and varied feed conditions, delivering more predictable performance and fewer unexpected tool changes. This combination supports higher uptime and a more efficient production rhythm. Geometry that improves cutting security and accessibility The insert’s parallelogram 85° outline and 15° clearance produce a robust cutting edge while enabling good access for shoulder and slot milling operations. The 85° approach offers a compromise between positive engagement and tool strength, reducing deflection in heavy cuts. The 2 mm corner radius increases edge support and extends life where interrupted cuts or stepovers occur, making the geometry particularly suited to demanding milling applications where edge stability is paramount. Chip control and process reliability for productive machining Equipped with chipbreaker F56, the insert promotes consistent chip formation across a broad range of cutting conditions, easing evacuation and reducing recutting. The coated carbide substrate supports thermal stability during sustained operations, which helps to maintain surface finish and repeatable tolerances. These properties translate into measurable process benefits: fewer tool exchanges, steadier cycle times and improved component quality for series production. Practical selection and handling advice for best results When integrating this insert into a machining cell, pair it with a suitably rigid clamping system and a cutter body designed for parallelogram inserts to ensure correct seating and coolant delivery. The tolerance class M and plate thickness 03 contribute to repeatable clamping and indexability; careful torqueing of the seat screw and regular inspection of the seat face will preserve the insert’s performance. For mixed‑material batches, the WSP45G grade offers a convenient single‑grade solution that reduces tool inventory while maintaining machining security. Choose Walter Tools’ Tiger‑tec Gold WSP45G insert for robust, long‑life milling — contact Metav Werkzeuge for availability and application support Technical data Article number: ADMT080320R-F56-WSP45G-WALTER Designation: ADMT080320R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Facts Size: 08 Thickness: 03 Corner radius: 2 mm Relief angle: 15° Parallelogram angle: 85° Chipbreaker: F56 Tolerance class: M Special features PVD‑coated carbide grade Tiger‑tec Gold Suitable for steel (P), stainless steel (M), superalloys/titanium (S) Parallelogram 85° insert form 2 mm corner radius for reinforced edge Intended for face and shoulder milling Robust chip control for varied cutting conditions FAQ Which materials is this insert suited for? The WSP45G grade is suitable for machining steel, stainless steel and heat‑resistant superalloys/titanium, offering a versatile option for mixed‑material production runs. What benefits does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold PVD coating on the insert enhances wear resistance and edge stability, increasing tool life and maintaining surface quality under thermal stress. How does the parallelogram 85° shape affect machining? The parallelogram 85° geometry balances cutting access and strength, improving rigidity in shoulder and slot milling while permitting favourable cutting engagement angles. What role does the F56 chipbreaker play? Chipbreaker F56 helps generate consistent chip shapes and improves evacuation, particularly beneficial when machining steels and stainless steels under varied feeds. What is the exact article reference for ordering? The SKU for ordering is ADMT080320R-F56-WSP45G-WALTER, supplied as a Tiger‑tec Gold WSP45G grade insert from Walter Tools. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT10T304R-F56 WKP35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WKP35G grade delivers durable performance and stable chip control for efficient milling of steel and cast iron; order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. ADMT10T304R-F56 WKP35G – Milling indexable insert, Tiger‑tec Gold, for steel and cast iron | Walter Tools The ADMT10T304R-F56 WKP35G is a parallelogram 85° milling insert with Tiger‑tec Gold coating, engineered for productive machining of steel and cast iron in medium to high‑duty operations Tiger‑tec Gold coating for extended tool life Optimised chipformer F56 for reliable chip control Parallelogram 85° geometry for versatile milling 0.4 mm nose radius for improved surface finish High productivity through advanced coating and grade The insert’s Tiger‑tec Gold technology combined with the WKP35G carbide grade provides a balance of wear resistance and toughness suited to the thermal and mechanical stresses of steel and cast iron machining. This coated carbide composition reduces flank wear and helps maintain a consistent cutting edge over longer cycles, which contributes to fewer insert changes and improved cycle times. For production environments where uptime and repeatable results matter, the coating and grade together support stable material removal and predictable tool life. Geometry that supports accuracy and chip management With a parallelogram 85° form and a 15° clearance angle, the geometry of this insert enables efficient engagement and favourable cutting forces during peripheral and face milling. The F56 chipformer is optimised for the typical chips produced from steels and cast irons, promoting controlled breakage and evacuation. A 0.4 mm nose radius delivers a fine edge for achieving good surface finish without sacrificing edge strength. These design choices translate into reliable dimensional results and reduced rework for typical industrial milling tasks. Application focus and operational benefits Designed primarily for machining of steel (ISO group P) and cast iron (ISO group K), the insert suits a range of operations from slotting to shoulder milling where a coated carbide solution is preferred. The combination of robust chip control and the insert’s dimensional features supports both intermittent cuts and continuous passes, making it appropriate for job shops and serial production alike. As a result, the insert helps to lower overall machining cost per component by extending productive cutting time and improving consistency across batches. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss Walter Tools Tiger‑tec Gold inserts and to secure the right specification for the intended application Technical Data SKU: ADMT10T304R-F56-WKP35G-WALTER Designation: ADMT10T304R-F56 WKP35G Product type: Fräswendeschneidplatte / Milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Insert size: 10 Thickness: T3 Clearance angle: 15° Nose radius: 0.4 mm Plate form: Parallelogram 85° Chipformer: F56 Grade: WKP35G Applicable materials: P / K Tolerance class: M Execution: T Special features Coated carbide (Tiger‑tec Gold) Optimised for steel and cast iron Stable chip formation Productive cutting for medium to high duty FAQ Which materials are recommended for this insert? The ADMT10T304R-F56 WKP35G is optimised for steel (ISO group P) and cast iron (ISO group K), with the WKP35G grade and Tiger‑tec Gold coating tailored to these material properties What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold on the insert improves wear resistance and thermal stability, resulting in longer edge life and more consistent machining performance across production runs How does the F56 chipformer affect machining? The F56 chipformer promotes controlled chip breakage and reliable evacuation when cutting steels and cast irons, reducing the risk of built‑up edge and improving surface quality What geometric features support surface finish? The parallelogram 85° form together with a 0.4 mm nose radius and 15° clearance angle helps produce accurate contours and a fine surface finish while maintaining edge strength Is this insert suitable for interrupted cuts or heavy engagement? The coated carbide grade and the insert geometry provide a balance of toughness and wear resistance suitable for intermittent cuts and medium to heavy engagements typical in production milling Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT10T304R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver grade and the WKP35S cutting material for high wear resistance and stable chip formation; the ADMT10T304R-F56 WKP35S insert combines robust geometry with efficient chip control for reliable milling. Order directly via Metav Werkzeuge or consult our technical team for application advice. ADMT10T304R-F56 WKP35S — milling insert, Tiger·tec Silver, Walter Tools The ADMT10T304R-F56 WKP35S is a parallelogram milling insert designed for productive machining of steel and cast iron with a Tiger·tec Silver coated grade. Tiger·tec Silver coating for high wear resistance Optimised for steel (P) and cast iron (K) Parallelogram 85° geometry for versatile approach 0.4 mm corner radius for reliable surface finish Maximise tool life and process stability with advanced coating The Tiger·tec Silver coating combined with the WKP35S grade provides a balanced response to both abrasive wear and adhesive tendencies encountered when machining steel and cast iron. The multilayer coating is engineered to reduce flank wear and delay notch formation, which means more consistent cutting performance over longer tool life. Due to this improved wear resistance, downtimes for tool changes are reduced and production sequences remain more predictable. The insert’s grade was selected to support common shop conditions, where heat and variable chip morphology demand a robust, coated carbide solution. Geometry that balances cutting forces and surface quality The parallelogram 85° form with a 15° clearance angle directs cutting forces and allows flexible approach angles in face and shoulder milling. The 0.4 mm corner radius contributes to a good surface finish while maintaining edge strength for interrupted cuts. With a plate thickness of T3 and the specified tolerance class M, the insert is dimensionally stable and suited for repeatable setups. These geometric choices are intended to provide a compromise between robustness and finishing capability, enabling the machining of components where moderate to high surface quality is required without sacrificing durability. Controlled chip formation for efficient machining cycles The integrated chipbreaker F56 has been developed to promote predictable chip shapes with both unalloyed and alloyed steels as well as cast iron, improving evacuation and reducing the risk of plunging chips. Classified for ISO groups P and K, the insert supports common workshop materials and typical cutting parameters. The combination of chip control and the coated grade contributes to reduced cycle times in many applications, as fewer interruptions for chip clearing and fewer insert changes translate into higher machine uptime and a more economical production process. For application-specific recommendations or to secure supply of the ADMT10T304R-F56 WKP35S milling insert from Walter Tools, please contact Metav Werkzeuge for direct ordering or consultancy by phone or e‑mail. Technical data Article number: ADMT10T304R-F56-WKP35S-WALTER Designation: ADMT10T304R-F56 WKP35S Brand: Walter Tools Product type: milling insert Facts Plate size: 10 Plate thickness: T3 Corner radius: 0.4 mm Clearance angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Applicable material groups: P (steel), K (cast iron) Suitable for milling operations requiring stable chip formation and wear resistance FAQ What materials is this insert suitable for? The ADMT10T304R-F56 WKP35S milling insert from Walter Tools is specified for ISO material groups P (steel) and K (cast iron), making it suitable for a wide range of steels and cast iron components. How does the Tiger·tec Silver series improve performance? The Tiger·tec Silver coating used on the WKP35S grade reduces abrasive wear and improves thermal stability, which extends tool life and keeps machining more consistent under varying cutting conditions. Which machining tasks benefit most from the 85° parallelogram geometry? The 85° parallelogram geometry is advantageous for face and shoulder milling where flexible approach angles and controlled cutting forces are required, helping to maintain surface quality and tool stability. What role does the F56 chipbreaker play? The F56 chipbreaker is designed to produce manageable chips with both steel and cast iron, aiding evacuation and reducing the likelihood of chip-related interruptions during milling. Is this insert dimensionally stable for repeatable setups? Yes; the T3 thickness and tolerance class M provide dimensional stability suitable for repeatable clamping and consistent machining results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned exclusively for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer. The Walter AG (brand: Walter Tools) is a leading manufacturer of precision tools for metalworking and is part of the Sandvik Group.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com