Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
ADMT10T304R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the WSM35G grade and a 15° relief angle for reliable machining of tough, heat‑resistant materials; order the insert directly via Metav Werkzeuge or request application advice from our consultants for optimal tool life and consistent surface quality. ADMT10T304R-F56 WSM35G Walter Tools — Milling insert, Tiger‑tec Gold, 15° relief The ADMT10T304R-F56 WSM35G is a parallelogram milling insert designed for machining rostfreien Stahl and heat‑resistant superalloys, combining a coated carbide grade with a specialised chipbreaker for stable cutting Tiger‑tec Gold coating for heat resistance Optimised chip control with F56 breaker 15° relief for stable cutting edges Parallelogram 85° shape for versatile milling High performance for demanding materials The WSM35G grade, part of the Tiger‑tec Gold series, is a coated carbide designed specifically for machining rostfreien Stahl and heat‑resistant superalloys. Its formulation promotes wear resistance and a stable cutting edge, which reduces the frequency of tool changes and supports uninterrupted production. For workshops processing clutch components, medical parts or aerospace alloys, this combination translates into improved process reliability and fewer interruptions for dressing or insert replacement. Geometry that improves process reliability The insert's parallelogram 85° geometry and 15° relief angle provide a dependable cutting orientation that supports moderate engagement angles and predictable load distribution. The 0.4 mm corner radius balances edge strength with surface finish capability, while the chipbreaker F56 helps form short, controllable chips in sticky, gummy materials. Together these elements reduce built‑up edge formation and thermal loading, so operators obtain a consistent result even under challenging cutting conditions. Productivity gains and surface quality benefits By combining a heat‑resistant coating with a geometry focused on chip control, this insert helps raise machining throughput while maintaining finish standards. The result is higher productivity with fewer rejects and a reduced need for secondary finishing. Process planners will appreciate the repeatable performance and the opportunity to extend tool life, thereby lowering machine downtime and improving overall shopfloor efficiency. Practical selection and application guidance When selecting a grade for rostfreien Stahl or titanium alloys, the WSM35G option should be considered where thermal stability and edge integrity are priorities. The ADMT10T304R‑F56 insert suits operations that require a compromise between edge strength and surface finish; for specific feeds, speeds and toolholder arrangements, Metav Werkzeuge can provide tailored recommendations to match the machining centre and part geometry. Contact Metav Werkzeuge for tailored application advice and to order genuine Walter Tools inserts with the WSM35G grade. Technical data SKU: ADMT10T304R-F56-WSM35G-WALTER Article designation: ADMT10T304R-F56 Grade: WSM35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.4 mm Shape: Parallelogram 85° Size designation: 10 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: F56 Coated carbide grade for high thermal stability Material recommendation: S / M (rostfreien Stahl; hitzebeständige Superlegierungen and titanium) Intended use: milling insert for challenging materials FAQ What materials is this insert best suited for? The ADMT10T304R-F56 WSM35G insert is recommended for rostfreien Stahl and heat‑resistant superalloys (S/M), where thermal stability and stable chip formation are required. How does the chipbreaker F56 affect machining? The chipbreaker F56 promotes short, controlled chips and helps prevent long, stringy swarf when machining tough and gummy materials, improving process security with the WSM35G grade. What benefit does the 15° relief angle provide? A 15° relief angle reduces contact on the flank face, lowering friction and heat generation and contributing to a more stable cutting edge during interrupted or continuous milling. Is the 0.4 mm corner radius suited for finishing operations? The 0.4 mm radius offers a compromise between edge strength and surface finish, making it suitable for semi‑finishing and finishing passes where robustness is required without sacrificing quality. Can this insert be used for titanium alloys? Yes; the WSM35G grade and the insert geometry make it appropriate for selected titanium and cobalt‑chrome applications within the S/M material groups. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected designations are used for explanation only. There is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise from the manufacturer (Walter Tools).
ADMT10T304R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger-tec Gold PVD coating for heat resistance and the WSP45G grade for secure chip formation; the parallelogram 85° form and 0.4 mm corner radius ensure reproducible axial milling results. Order the ADMT10T304R-F56 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. ADMT10T304R-F56 WSP45G milling insert — Tiger-tec Gold, 15° clearance, 0.4 mm radius (Walter Tools) The ADMT10T304R-F56 WSP45G is an indexable milling insert designed for reliable finishing and roughing in steels, rostfreier Stahl and heat-resistant superalloys, optimised for axial milling operations High-performance Tiger-tec Gold coating Versatile for P / M / S materials Parallelogram 85° form for axial milling 0.4 mm corner radius for precise cuts Consistent cutting performance across demanding materials The coated milling insert uses the Tiger-tec Gold technology to deliver improved thermal stability and wear resistance, which translates into longer cutting intervals and fewer tool changes. The WSP45G grade is a PVD-coated carbide developed for toughness and broad applicability: it manages the typical heat and chip behaviour when machining steel, rostfreier Stahl and superalloys/titanium. By choosing a tougher grade with a specialised coating, the result is a more stable cutting edge under variable loads and temperatures, reducing the risk of edge chipping and built-up edge formation. This stability supports predictable cycle times and repeatable part quality in production environments. Geometry engineered for precise axial milling and chip control The insert’s parallelogram 85° plate form combined with a 15° clearance angle creates a geometry suited to axial milling strategies, improving accessibility in tight features and enabling efficient axial engagement. The integrated F56 chipbreaker promotes controlled chip segmentation for a wide range of feeds and depths, reducing the likelihood of long, stringy chips and improving surface finish. The 0.4 mm corner radius provides a balance between strength and finish quality, allowing reliable corner life without sacrificing dimensional accuracy. Specified plate thickness T3 gives stable clamping and resistance to vibration during moderate depth cuts. Productivity gains through fewer interruptions and predictable tool life The insert’s design focuses on economical machining: the combination of a robust substrate and Tiger-tec Gold coating extends tool life, while consistent chip control reduces downtime for clearing chips or reworking components. For job shops and production lines aiming to raise throughput, the insert supports higher process stability and repeatable component tolerances. Clear identification via the ISO designation ensures straightforward tool selection and inventory control, simplifying logistics and aiding rapid quoting for production batches. Contact Metav Werkzeuge for tailored advice on integrating the ADMT10T304R-F56 WSP45G into existing milling processes and to arrange supply from stock Technical data Article number: ADMT10T304R-F56-WSP45G-WALTER SKU / Label: Fräswendeschneidplatte ADMT10T304R-F56 WSP45G Walter Tools Product type: Milling insert Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Clearance angle: 15° Insert size: 10 Plate thickness: T3 Tolerance class: M Form: Parallelogram 85° Special features Series: Tiger-tec Gold Grade: WSP45G (PVD-coated carbide) Chipbreaker: F56 Applicable materials: P / M / S Execution: T Suitable for axial milling FAQ What materials is this insert suitable for? The ADMT10T304R-F56 WSP45G insert from Walter Tools is specified for P / M / S applications, meaning it is suitable for steel, rostfreier Stahl and heat-resistant superalloys/titanium as listed in the product data. How does the Tiger-tec Gold coating benefit production runs? The Tiger-tec Gold coating on this Walter Tools insert increases thermal and wear resistance, which helps to extend tool life and maintain consistent cutting performance over longer production runs. What milling strategies suit the parallelogram 85° form? The parallelogram 85° geometry is optimised for axial milling operations and provides improved accessibility for slotting and face milling where axial engagement is required. Can the insert handle mixed batch machining of steel and rostfreier Stahl? Yes. The WSP45G grade is designed as a versatile PVD-coated option that handles the heat and chip characteristics of both steel and rostfreier Stahl, enabling mixed-material batches with reduced tooling changes. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. The mention of brand names such as Walter Tools is for identification and explanation only; there is no affiliation between Metav Werkzeuge and the brand owners. The offered item is an original, factory-new product of the respective manufacturer.
ADMT10T308R-F56 WKP25S Wendeplatten - Walter Tools
The combination of Tiger‑tec Silver coating and the WKP25S grade ensures reliable wear resistance and stable chip formation for demanding steel and cast iron applications; the Parallelogram 85° geometry with a 15° clearance angle delivers versatile milling strategies and robust edge life. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. ADMT10T308R-F56 WKP25S milling indexable insert – Walter Tools, Tiger‑tec Silver for steel & cast iron A high‑performance ADMT10T308R-F56 WKP25S milling insert engineered for productive machining of steel and cast iron, optimised for reliable chip control and extended tool life. Tiger‑tec Silver coating for extended tool life Optimised for steel and cast iron machining Parallelogram 85° shape for flexible milling strategies 0.8 mm corner radius for robust edge strength High productivity through material‑matched grade The insert’s WKP25S grade, a coated carbide developed within the Tiger‑tec Silver family, is specifically matched to the thermal and mechanical demands of steel and cast iron (ISO groups P and K). This tailored combination reduces flank and crater wear while maintaining consistent cutting performance, which translates into fewer tool changes and higher cumulative productivity. The presence of a dedicated F56 chipbreaker helps to shape and evacuate chips reliably, reducing downtime linked to chip control problems and stabilising process output. Durable cutting edge and predictable wear behaviour A 0.8 mm corner radius paired with tolerance class M delivers a balance between edge strength and dimensional consistency. The coated substrate provides wear resistance under mixed cutting temperatures, while the geometry resists chipping under interrupted cuts. The result is longer tool life and predictable tool‑change intervals, enabling tighter process planning and improved cost efficiency per component. For operations seeking a dependable cutting regime, this insert reduces variability and supports repeatable part quality. Geometry designed for versatile milling strategies The Parallelogram 85° form offers an adaptable approach to face, shoulder and helical milling where approach angles influence radial cutting force and surface finish. With a 15° clearance (relief) angle and T3 plate thickness, the geometry facilitates entry into confined contours and provides stability during lateral engagement. These characteristics assist processors in selecting cutting parameters that favour higher metal removal rates or superior surface finish, depending on the production objective. Process integration and practical application guidance As a Walter Tools solution, the insert is intended for catalogue‑ and geometry‑dependent operations in general‑duty to demanding milling tasks on steel and cast iron. The combination of grade, coating and chipbreaker simplifies parameter selection for machinists and process engineers: optimise feed for chip segmentation and adjust speed to balance wear and productivity. The SKU identifies the specific configuration for procurement and inventory control, ensuring compatibility with existing toolholders and insert seats. For tailored cutting data and test results, Metav Werkzeuge’s consultants can provide machining recommendations and parameter windows. Contact Metav Werkzeuge for application support and local availability of Walter Tools Tiger‑tec Silver inserts—technical consultation and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT10T308R-F56-WKP25S-WALTER Label: Fräswendeschneidplatte ADMT10T308R-F56 WKP25S Walter Tools SKU: ADMT10T308R-F56-WKP25S-WALTER Series: Tiger‑tec Silver Grade: WKP25S Facts Clearance angle: 15° Corner radius: 0.8 mm Plate form: Parallelogram 85° Plate size: 10 Plate thickness: T3 Tolerance class: M Special features Coating: Tiger‑tec Silver Chipbreaker: F56 Material applicability: steel (P) Material applicability: cast iron (K) Designation: ADMT10T308R-F56 WKP25S FAQ What materials is this insert suitable for? The ADMT10T308R-F56 WKP25S insert is designed primarily for steel and cast iron machining, matching ISO groups P and K as indicated by the WKP25S grade. How does the Tiger‑tec Silver coating benefit tool life? The Tiger‑tec Silver coating reduces abrasive and adhesive wear on the cutting edges, helping the insert maintain sharpness and extend service life under typical steel and cast iron conditions. What role does the F56 chipbreaker play in milling? The F56 chipbreaker controls chip formation and evacuation, which improves surface quality and reduces the risk of chip‑related incidents during milling. Is the geometry suitable for both face and shoulder milling? Yes, the Parallelogram 85° form with a 15° clearance angle and moderate corner radius provides flexibility for face, shoulder and entry operations where a balance of strength and access is required. How is consistency between inserts ensured? Tolerance class M ensures dimensional consistency for predictable seating and repeatable tool performance across batches of inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademark notice: Brand names and trademarks are the property of their respective owners. They are used solely for identification and explanatory purposes. The offered item is original and brand new from the manufacturer. The Walter brand is mentioned where appropriate.
ADMT10T308R-F56 WKP35G Wendeplatten - Walter Tools
High abrasion resistance from the Tiger·tec Gold coating combined with the optimised F56 chipbreaker and a robust 0.8 mm corner radius ensures stable, productive milling of steel and cast iron — order the ADMT10T308R-F56 WKP35G insert directly via Metav Werkzeuge or ask our consultants for tailored application advice. ADMT10T308R-F56 WKP35G Parallelogram milling insert, Tiger·tec Gold, for steel and cast iron — Walter Tools ADMT10T308R-F56 WKP35G is a coated carbide milling insert in a parallelogram 85° form designed for productive face and shoulder milling of steels and cast irons in industrial machining. Tiger·tec Gold coating for extended tool life Optimised F56 chipbreaker for stable chips Parallelogram 85° geometry for versatile milling Suitable for steel and cast iron applications Long-lasting coating for consistent productivity The Tiger·tec Gold series brings a proven coating technology that improves wear resistance and extends edge life under the cyclic loads typical in steel and cast iron machining. The WKP35G grade is a coated carbide formulation tuned for the thermal and abrasive demands of group P (steel) and group K (cast iron) materials according to ISO classifications. This results in fewer tool changes, reduced downtime and a lower cost per component in medium- to high-volume production. The combination of the coating and the grade is intended to deliver predictable performance across a broad range of machining parameters. Controlled chip flow and robust cutting geometry The insert’s F56 chipbreaker is engineered to produce controllable, short chips that evacuate reliably during interrupted and continuous cuts, improving surface quality and machine uptime. The parallelogram 85° geometry offers a favourable cutting direction and adaptability in common milling setups, while the 15° clearance angle helps reduce rubbing at the flank. A 0.8 mm corner radius increases edge strength for roughing passes yet still enables acceptable finishes in finishing operations. Together, these geometrical choices reduce cutting forces and lead to more stable processes and consistent component tolerances. Practical benefits for workshop integration Designed with industrial machinists in mind, the insert matches the ADMT10-series form factor and tolerance expectations (tolerance class M), making it suitable for systematic tool management and predictable tool life planning. The plate thickness T3 and standard plate size simplify inventory and reorder processes. For production planners the key advantages are repeatability, reduced scrap, and improved surface integrity on machined parts. If process optimisation is required, Metav Werkzeuge provides application guidance and cutting data recommendations to align cutting speeds and feeds with shop conditions. Contact Metav Werkzeuge for availability, cutting data and application recommendations for the Walter Tools ADMT10T308R-F56 WKP35G — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: ADMT10T308R-F56-WKP35G-WALTER Article: ADMT10T308R-F56 WKP35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 10 mm Thickness: T3 Tolerance class: M Special features Grade: WKP35G Chipbreaker: F56 Geometry: Parallelogram 85° Material suitability: Steel (P), Cast iron (K) Coating technology: Tiger·tec Gold Material of insert: Coated carbide FAQ Which materials is this insert best suited for? The ADMT10T308R-F56 WKP35G insert is optimised for steel (ISO group P) and cast iron (ISO group K) applications, reflecting the WKP35G grade and Tiger·tec Gold coating characteristics. What cutting geometry and edge radius does it offer? This insert features a parallelogram 85° geometry, a 15° relief angle and a 0.8 mm corner radius to balance edge strength with surface finish requirements. How does the F56 chipbreaker improve machining? The F56 chipbreaker creates stable, short chips that evacuate reliably, which supports consistent surface quality and reduces the likelihood of chip-related interruptions. What does tolerance class M mean for application? Tolerance class M denotes a medium precision class suitable for general industrial milling applications where repeatable seating and interchangeability are required. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product from the manufacturer. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT10T308R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WKP35S grade for extended tool life and consistent chip control; order directly via Metav Werkzeuge or contact the consultants for tailored cutting data and holder compatibility. ADMT10T308R-F56 WKP35S Parallelogram 85° milling insert for steel and cast iron, Walter Tools The ADMT10T308R-F56 WKP35S is a coated indexable milling insert designed for productive face and peripheral milling in steel (P) and cast iron (K), combining a robust grade with a geometry tuned for reliable chip control Tiger·tec Silver coating for extended wear resistance Designed for steel and cast iron machining Parallelogram 85° form with 15° clearance 0.8 mm corner radius for precise cutting Longer tool life through advanced coating technology The Tiger·tec Silver coating and the WKP35S grade deliver higher thermal stability and improved resistance to abrasive wear, which results in fewer tool changes and longer effective cutting periods. This coated carbide combination reduces flank wear under the typical heat and pressures of machining steels and cast irons, enabling steadier process windows and lower downtime. The result is a measurable uplift in productivity where tool-life consistency matters. Geometry engineered for stable chips and surface finish A parallelogram 85° plate form together with a 15° clearance angle and a 0.8 mm corner radius creates a balanced cutting edge that resists chipping while promoting controlled chip formation. The F56 chipbreaker is optimised to break and evacuate chips for common machining depths and feeds, reducing chip re-cutting and safeguarding the workpiece surface. These features translate into reliable dimensional results and a reduced need for secondary finishing. Versatile performance for P and K material groups Rated for ISO groups P / K, this insert is suitable for a broad range of unalloyed and alloyed steels as well as grey and ductile cast irons. The ADMT designation and size 10 format ensure compatibility with many standard toolholders; the T3 plate thickness contributes to edge stability during interrupted cuts. For production environments that alternate between steels and cast irons, this insert offers a pragmatic balance of economy and consistent cutting behaviour, supporting predictable cycle times and surface quality. Contact Metav Werkzeuge for application-specific cutting data, toolholder checks and to discuss procurement of the ADMT10T308R-F56 WKP35S from Walter Tools Technical Data Article number: ADMT10T308R-F56-WKP35S-WALTER Label: Fräswendeschneidplatte ADMT10T308R-F56 WKP35S Walter Tools Type: Fräswendeschneidplatte / Milling insert Manufacturer: Walter Tools Series: Tiger-tec Silver Grade: WKP35S Chipbreaker: F56 Form: Parallelogram 85° Designation: ADMT10T308R-F56 WKP35S Facts Clearance angle: 15° Corner radius: 0.8 mm Plate size: 10 Plate thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Silver Material: P / K (Steel and Cast iron) Suitability: Steel machining, Cast iron machining Execution: T UID / SKU: ADMT10T308R-F56-WKP35S-WALTER FAQ What materials is this insert suitable for? The ADMT10T308R-F56 WKP35S is designed for ISO groups P and K, making it suitable for machining a range of steels and cast irons. What are the main advantages of the Tiger·tec Silver coating? The Tiger·tec Silver coating on the WKP35S grade improves thermal stability and abrasion resistance, extending tool life and supporting consistent machining results. How does the F56 chipbreaker influence machining? The F56 chipbreaker promotes controlled chip formation and efficient evacuation, which helps maintain surface quality and reduces the risk of chip-related interruptions. Is the insert compatible with standard ADMT toolholders? The ADMT10T308R-F56 format is a standard indexable geometry intended for use with holders that accept ADMT inserts; check holder specifications for size 10 and T3 thickness compatibility. What cutting tasks is the 0.8 mm corner radius best for? A 0.8 mm corner radius balances edge strength and finish quality, suitable for general finishing and semi-finishing operations where chipping resistance is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanatory purposes only and do not imply any affiliation with our company. The offered item is original, factory‑new goods from the manufacturer Walter Tools.
ADMT10T308R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a WSM35G graded coated carbide and a secure parallelogram seating to improve edge life and machining reliability when working with stainless steels and heat‑resistant alloys; order the inserts via Metav Werkzeuge or consult the team for application advice. ADMT10T308R-F56 WSM35G indexable milling insert — Tiger·tec Gold coating, for stainless steels and superalloys — Walter Tools The ADMT10T308R-F56 WSM35G is an indexable milling insert engineered for productive machining of rostfreier Stahl and heat‑resistant alloys, delivering stable chip control and enhanced tool life in demanding cuts Tiger·tec Gold coating for edge stability Optimised for rostfreier Stahl and superalloys Parallelogram 85° shape for secure seating 0.8 mm corner radius for consistent surface finish Consistent edge performance for hard-to-cut materials The coated carbide grade WSM35G targets demanding applications by combining a wear‑resistant coating with a substrate designed for thermal stability. This composition supports steady chip formation and reduces the risk of built‑up edge when machining rostfreier Stahl and nickel‑based alloys. The Tiger·tec Gold technology contributes to lower flank wear and reliable cutting behaviour, which translates into longer intervals between indexings and a more predictable production flow. Geometry and clamping that improve process security A parallelogram 85° seating reduces insert movement under load and transfers cutting forces evenly to the toolholder, enhancing stability during interrupted cuts. The 0.8 mm corner radius provides a balance between edge strength and surface finish, making the insert suitable for medium to heavy passes while still maintaining a consistent workpiece quality. The ADMT form ensures repeatable positioning, simplifying set‑up and reducing the need for frequent adjustments. Chip control and edge preparation for productive milling Equipped with the F56 chipbreaker, the insert manages swarf effectively across a range of feeds and depths, which minimises recut and contributes to consistent cycle times. The chipbreaker geometry is tuned to the material groups indicated for the grade, supporting efficient evacuation in throaty pockets and slotting operations. As a result, tool life is extended and machine uptime benefits from fewer interruptions for clearing chips. Material scope and application guidance The insert is specified for materials in material groups M and S according to ISO classifications — that is, rostfreier Stahl (stainless steels) and heat‑resistant superalloys or titanium. These groups present challenges such as heat concentration and ductile chip formation; the WSM35G grade and its coating are engineered to address these by providing thermal resistance and a stable cutting edge. Where high process security and surface quality are priorities, this insert offers a robust solution for both finishing and semi‑finishing operations. Contact Metav Werkzeuge for application recommendations and to source Walter Tools ADMT10T308R-F56 WSM35G inserts for demanding rostfreier Stahl and superalloy machining Technical data SKU: ADMT10T308R-F56-WSM35G-WALTER Article designation: ADMT10T308R-F56 WSM35G Product type: Milling indexable insert Brand: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 0.8 mm Insert shape: Parallelogram 85° Insert size: 10 Thickness: T3 Chipbreaker: F56 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Grade: WSM35G Geometry: Parallelogram ADMT design Material suitability: rostfreier Stahl (M), superalloys / titanium (S) Intended use: productive milling, secure chip control FAQ What materials is this insert suitable for? The ADMT10T308R-F56 WSM35G insert is specified for rostfreier Stahl and heat‑resistant superalloys (ISO groups M and S), offering solutions for tough‑to‑machine alloys. How does the Tiger·tec Gold coating help performance? Tiger·tec Gold coating on the WSM35G grade increases thermal resistance and reduces flank wear, improving edge life and maintaining cut quality under higher temperatures. What is the benefit of the parallelogram 85° shape? The parallelogram 85° shape secures the insert in the pocket and distributes cutting forces evenly, which enhances process stability during interrupted and heavy cuts. Which chipbreaker should be expected on this insert and why? This insert features the F56 chipbreaker, optimised for consistent chip control in rostfreier Stahl and superalloy operations, reducing recutting and improving swarf evacuation. Is the corner radius suitable for finishing operations? The 0.8 mm corner radius balances edge strength and surface finish, making the insert suitable for both semi‑finishing and certain finishing passes depending on cutting parameters. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. The mentioned brand is included for identification and explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered article is an original, brand‑new product from the manufacturer.
ADMT10T308R-F56 WSM35S WSM35S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating, the WSM35S grade and the Parallelogram 85° geometry for reliable edge life and secure chip control; order the insert directly via Metav Werkzeuge or request advice from our consultants. ADMT10T308R-F56 WSM35S milling indexable insert — Tiger·tec Silver, chipbreaker F56 (Walter Tools) ADMT10T308R-F56 WSM35S is a high-performance milling insert designed for demanding applications in rostfreier Stahl and heat-resistant alloys Tiger·tec Silver coating for longevity Grade WSM35S for difficult-to-machine materials Parallelogram 85° geometry for axial versatility Chipbreaker F56 for controlled chip formation Longer tool life through modern coating technology The combination of the Tiger·tec Silver coating and the WSM35S carbide grade delivers improved wear resistance and a more stable cutting edge under thermal stress. Coating technology is engineered for application in rostfreier Stahl and superalloys, where heat generation and built-up edge are critical factors. By reducing flank wear and extending edge integrity, the insert supports longer service intervals and fewer indexings, which contributes to higher productivity and lower process costs. Predictable chip control and process security The F56 chipbreaker is optimised for secure chip formation when machining tough materials; chips are guided away from the cutting zone to reduce re-cutting and surface damage. The Parallelogram 85° geometry offers a balanced entry angle that is suited to axial milling tasks and stable engagement. Together, these characteristics enable consistent material removal rates and reproducible surface finishes, giving production planners reliable cycle-time estimates and operators steady machining conditions. Geometry and angles that improve cutting stability A 15° clearance angle and a 0.8 mm corner radius are implemented to balance edge strength with accessibility into contours and slots. The clearance reduces rubbing and heat build-up behind the cutting edge, while the corner radius strengthens the periphery against mechanical shock when interrupted cuts occur. These geometric choices are especially beneficial in applications involving rostfreier Stahl and high-temperature alloys, where edge robustness determines component quality and tool life. Practical advantages for workshop and production The insert is supplied in the ADMT10T308R-F56 form factor with a T3 thickness and size designation of 10, enabling compatibility with standard tool bodies that accept this insert family. Since the grade is part of the Tiger·tec Silver series, it is ideally placed for operations where a combination of wear resistance and thermal stability is required. Selection of this insert will typically reduce downtime associated with frequent edge changes and supports smoother production flows in both job-shop and serial environments. Choose the Walter Tools Tiger·tec Silver ADMT10T308R-F56 WSM35S insert for applications in rostfreier Stahl and high-temperature alloys — contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT10T308R-F56-WSM35S-WALTER Designation: ADMT10T308R-F56 WSM35S Manufacturer: Walter Tools Facts Geometry: Parallelogram 85° Clearance angle: 15° Corner radius: 0.8 mm Size: 10 Thickness: T3 Grade: WSM35S Special features Series: Tiger·tec Silver Chipbreaker: F56 Material compatibility: rostfreier Stahl, Superalloys/Titanium (ISO M, S) Substrate: coated carbide (beschichtetes Hartmetall) Tolerance class: M Execution: T FAQ What materials is the ADMT10T308R-F56 WSM35S suitable for? The ADMT10T308R-F56 WSM35S insert is specified for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), where thermal stability and controlled chip formation are required. How does the Tiger·tec Silver coating benefit performance? Tiger·tec Silver coating on the WSM35S grade enhances wear resistance and thermal protection, which prolongs edge life and supports consistent machining of challenging materials. Can this insert be used for axial milling and slotting operations? Yes; the Parallelogram 85° form and the 15° clearance angle provide a versatile entry geometry suited to axial milling and many slotting scenarios when mounted in the correct tool holder. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT10T308R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Combining the WSM45X coated carbide with a Parallelogram 85° geometry and an F56 chipbreaker provides secure chip control and extended cutting-edge life when machining challenging materials such as rostfreier Stahl and heat-resistant superalloys; take advantage of the stable edge performance and reliable chip formation for consistent production results. Order the ADMT10T308R-F56 WSM45X directly via Metav Werkzeuge or consult the technical team for tailored application advice. ADMT10T308R-F56 WSM45X milling insert, coated carbide, for rostfreier Stahl — Walter Tools The ADMT10T308R-F56 WSM45X is a parallelogram-shaped indexable milling insert designed for secure face and shoulder milling of rostfreier Stahl and heat-resistant alloys, offering stable cutting edges and efficient chip formation in demanding operations. Coated carbide grade WSM45X for tough alloys Parallelogram 85° geometry for stable milling 0.8 mm corner radius for reliable edge life F56 chipbreaker for controlled chip formation Reliable performance for difficult-to-machine materials The combination of a coated carbide grade specifically developed for high thermal and mechanical loads and the insert's geometry ensures repeatable performance when machining rostfreier Stahl and nickel-based alloys. The WSM45X composition promotes stable chip formation under elevated cutting temperatures, reducing the tendency for built-up edge and minimising tool-related stoppages. For production environments seeking process stability, this insert reduces the frequency of unpredictable tool wear and supports longer productive cutting times. Predictable chip control and edge stability for efficient cycles With an integrated F56 chipbreaker and a 0.8 mm corner radius, the insert provides well-controlled chip segmentation and a robust cutting edge, which together improve surface finish and protect the tool margin during interrupted cuts. The chipbreaker is tailored to manage the tough chips typical of S and M material groups (heat-resistant superalloys and rostfreier Stahl), enabling safer evacuation and lower thermal load on the cutting edge. This results in fewer machining interruptions and more consistent component quality across batches. Practical dimensions and compatibility for easy tool integration The insert's Parallelogram 85° form and T3 thickness make it compatible with a wide range of milling toolholders designed for indexable inserts, allowing straightforward replacement and predictable seat fit. Key geometric data such as the 15° clearance angle and the measured corner radius support accurate toolpath planning and reliable assembly in multi-insert cutters. Where process optimisation is required, pairing this insert with appropriately rated toolholders and cutting parameters from Walter Tools assists in achieving the expected tool life and part tolerances. For application-specific recommendations or to integrate Walter Tools inserts into an existing machining cell, contact Metav Werkzeuge for expert advice and specification support — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number / SKU: ADMT10T308R-F56-WSM45X-WALTER Designation: ADMT10T308R-F56 WSM45X Type: Milling insert Brand: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Core specifications Size: 10 mm Geometry: Parallelogram 85° Clearance angle: 15° Corner radius: 0.8 mm Thickness: T3 Chipbreaker: F56 Tolerance class: M Materials & features Coating: coated carbide (WSM45X) Material suitability: S, M (ISO groups) — heat-resistant alloys and rostfreier Stahl Edge stability: optimised for secure chip formation Typical applications: face and shoulder milling in demanding materials Series information: Walter Schneidstoffsorte - Serie offen FAQ What materials is this insert suited for? This insert is designed for machining S and M ISO groups and performs well in rostfreier Stahl and heat-resistant superalloys when using recommended cutting parameters. How does the F56 chipbreaker benefit production runs? The F56 chipbreaker on the ADMT10T308R-F56 supports controlled chip formation, reducing the risk of built-up edge and improving surface quality during extended runs. Which insert geometry is used and why does it matter? The Parallelogram 85° geometry provides stable cutting engagement and helps maintain consistent cutting forces, contributing to reliable edge life and dimensional stability. Is the corner radius suitable for finishing? The 0.8 mm corner radius offers a compromise between edge strength and surface finish, making it suitable for semi-finishing and robust finishing tasks in demanding materials. Can the insert be used in standard indexable milling systems? Yes, the ADMT10T308R-F56 WSM45X is compatible with holders designed for parallelogram inserts of the specified size and thickness; ensure seat and clamp compatibility before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification purposes only and do not imply any affiliation between Metav Werkzeuge and the named manufacturers. The listed article is an original, brand-new product from the stated manufacturer.
ADMT10T308R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the proven Tiger‑tec Gold cutting grade and the versatile WSP45G chemistry to secure stable chip formation and consistent edge life in mixed milling operations; order the required inserts directly via Metav Werkzeuge or consult our specialists for tailored cutting data. ADMT10T308R-F56 WSP45G — Milling insert, Parallelogram 85°, Walter Tools The ADMT10T308R-F56 WSP45G is a parallelogram 85° milling insert engineered for versatile milling of steel, stainless steel and heat‑resistant alloys in general milling applications Tiger‑tec Gold PVD coating Versatile for P / M / S materials Parallelogram 85° geometry Chipbreaker F56 for stable chips Corner radius 0.8 mm for robustness Higher throughput through optimised cutting grade and coating The combination of the WSP45G grade with the Tiger‑tec Gold coating gives a balanced performance for common milling tasks on steels and stainless‑standing materials. The coated carbide substrate reduces flank wear and extends tool life under typical industrial feeds and speeds. As a consequence, cycle times are often reduced because the insert tolerates the elevated temperatures and work‑hardening tendencies of many steels, while the coating supports consistent surface quality. This makes the insert particularly suitable for medium‑to‑high productivity milling where reproducible results and predictable tool change intervals matter. Precise geometry and chip control for reliable machining The Parallelogram 85° form and integrated chipbreaker F56 ensure directed chip flow and secure engagement at common axial depths. The 15° free angle and corner radius 0.8 mm combine to provide a robust cutting edge that resists edge chipping when interrupted cuts or variable engagement occur. Explained simply, the geometry reduces mechanical shock to the cutting edge and helps to maintain a stable cutting process, which is beneficial when machining mixed batches or components with varied contours. The result is fewer rejects and steadier surface finish from one operation to the next. Application guidance and economic advantages Designed for the P / M / S material groups, this insert handles unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. The WSP45G grade is a tough, PVD‑coated carbide developed for milling, which means operators can rely on consistent chip formation and a broad material coverage without frequent grade changes. From a cost perspective, extended edge life and fewer machining interruptions lower overall process costs and support leaner production schedules. For specific cutting parameters and optimised feeds or speeds, reference cutting data from Walter Tools or contact Metav Werkzeuge for condition‑specific recommendations. Contact Metav Werkzeuge today for specific cutting parameters, availability and advice on integrating Walter Tools ADMT10T308R-F56 WSP45G into production; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical Data Article number: ADMT10T308R-F56-WSP45G-WALTER Article designation: ADMT10T308R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Tolerance class: M Shape: Parallelogram 85° Execution: T Numbers / Core technical data Free angle: 15° Corner radius: 0.8 mm Plate size: 10 Plate thickness: T3 Special features Coated carbide (Tiger‑tec Gold) Chipbreaker type: F56 Material applicability: P / M / S Robust edge for interrupted cuts Designed for general milling applications FAQ What materials is this insert suitable for? The ADMT10T308R‑F56 WSP45G insert from Walter Tools is qualified for P / M / S groups, covering steel, stainless steel and heat‑resistant alloys including titanium. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the ADMT10T308R‑F56 WSP45G improves thermal resistance and reduces flank wear, which supports longer tool life and more consistent surface finish. Which geometry advantages does the Parallelogram 85° provide? Parallelogram 85° geometry offers stable engagement and favourable approach angles for shoulder and face milling, enhancing chip evacuation with the F56 chipbreaker. Is the corner radius of 0.8 mm suitable for finishing? A corner radius 0.8 mm provides a balance between edge strength and surface quality; it is suitable for semi‑finishing and general finishing where robustness is required. Can this insert handle interrupted cuts? Yes, the combination of the robust grade WSP45G, the 0.8 mm corner radius and the insert geometry give reliable performance under interrupted cut conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The item offered is original, brand‑new goods from the manufacturer.
ADMT10T308R-G56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of long tool life through Tiger·tec Gold coating, reliable chip control with G56, and stable cutting geometry to maintain productive milling cycles; order directly via Metav Werkzeuge or consult the team for application-specific guidance. ADMT10T308R-G56 WKP35G milling insert — Walter Tools, Tiger·tec Gold coating, for steel and cast iron The ADMT10T308R-G56 WKP35G is a parallelogram milling insert engineered for medium-duty to demanding finishing operations in steel and cast iron, combining a wear-resistant coating with a geometry tuned for consistent chip control. Tiger·tec Gold coating for long tool life Optimised for steel and cast iron machining Parallelogram 85° geometry for stable cutting 0.8 mm corner radius for versatile profiles Durable coating that reduces tool changes and cost per part The core advantage of the insert is its Tiger·tec Gold coating paired with the WKP35G grade, a combination designed to resist abrasive wear and thermal loading during interrupted and continuous cuts. This coated carbide construction improves tool life, which reduces tool change frequency and contributes to a lower cost per component in serial production. For operations that demand predictable wear behaviour, the coated surface and modern substrate chemistry offer improved process stability compared with uncoated grades. Geometry tailored for repeatable stability and surface quality The insert’s Parallelogram 85° form and 15° clearance angle produce a reliable engagement angle that supports stable milling and consistent surface finish. The 0.8 mm corner radius balances edge strength with the ability to achieve fine profiles, making the geometry suitable for a range of finishing passes. The plate thickness T3 and M tolerance class contribute to secure clamping and repeatable positioning in standard milling cutters, reducing vibration and increasing repeatability across tool life. Chip control and material range optimised for production use Equipped with the G56 chipbreaker, the cutting edge is configured to break and evacuate chips efficiently when machining steel (ISO group P) and cast iron (ISO group K). The chipformer design reduces the risk of re-cutting and supports higher feed rates where the process allows, improving productivity without compromising surface integrity. The WKP35G grade is explicitly developed for these material groups, aligning substrate hardness and coating characteristics to typical heat and deformation patterns encountered in cutting. Practical benefits for workshop integration and tool management The indexable format allows for quick insert changes and consistent clamping accuracy, supporting lean tool management. The designation and series information highlight compatibility with tooling systems that accept the ADMT geometry, simplifying inventory choices. With its balance of wear resistance and geometry, the insert is particularly suited to jobbing and small-series production where efficiency and predictable tool performance are priorities. For application advice on Walter Tools milling inserts or to specify the ADMT10T308R-G56 WKP35G for a particular machining set-up, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge’s technical consultants can advise on cutter selection, speeds and feeds, and optimal clamping solutions. Technical data Article number: ADMT10T308R-G56-WKP35G-WALTER Designation: ADMT10T308R-G56 ISO designation: ADMT10T308R-G56 WKP35G Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 10 mm Plate thickness: T3 Plate form: Parallelogram 85° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Coating: Tiger·tec Gold (coated carbide) Chipbreaker: G56 Material suitability: steel (ISO P), cast iron (ISO K) Execution: T FAQ Which materials is this insert suitable for? The ADMT10T308R-G56 WKP35G from Walter Tools is designed primarily for steel (ISO group P) and cast iron (ISO group K); the WKP35G grade and G56 chipbreaker are tuned for these materials. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the insert enhances wear resistance and thermal stability, extending life and maintaining cutting-edge integrity during extended production runs with ADMT10T308R-G56 WKP35G. How does the G56 chipbreaker influence machining? The G56 chipbreaker promotes controlled chip formation and evacuation, lowering the chance of re-cutting and improving surface finish when machining steels and cast irons with this Walter Tools plate. Is the geometry suitable for finishing passes? Yes—the Parallelogram 85° geometry combined with a 0.8 mm corner radius provides stability and a fine profile suitable for finishing operations while preserving edge strength. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original factory-new goods of the manufacturer.
ADMT10T308R-G56 WSM35G WSM35G Wendeplatten - Walter Tools
The combination of Tiger‑tec Gold coating and the WSM35G grade delivers stable cutting edges and reliable chip control via the G56 chipformer, making the insert suitable for stainless steel and tough superalloys; order directly via Metav Werkzeuge or consult our specialists for application matching. ADMT10T308R-G56 WSM35G – Milling indexable insert, Tiger‑tec Gold coating, G56 chipformer | Walter Tools A ADMT10T308R-G56 WSM35G milling insert engineered for stable, productive machining of stainless steel and heat‑resistant superalloys. Tiger‑tec Gold coating for high thermal stability WSM35G grade for stainless steel and superalloys G56 chipformer for reliable chip control Parallelogram 85° shape, 0.8 mm corner radius High‑temperature coating and grade for demanding materials The combination of the Tiger‑tec Gold coating and the WSM35G carbide grade delivers improved resistance to thermal and mechanical wear when machining difficult alloys. The coating technology supports a robust cutting edge, while the substrate grade is optimised for applications on stainless steel and heat‑resistant superalloys, reducing the likelihood of built‑up edge and premature flank wear. As a result, the insert contributes to longer tool life and steadier component quality in continuous production runs. Geometry tailored for stability and predictable tool life The parallelogram 85° platform paired with a 0.8 mm corner radius and a 15° free angle provides a controlled engagement with the workpiece and an effective load distribution at the cutting edge. The medium thickness (T3) contributes to mechanical stability under intermittent and continuous cutting conditions, while the insert form supports radial and axial cutting strategies. These geometric choices lower the risk of chipping and enable consistent surface finishes when machining tough materials. Chip control and process reliability on the shop floor The integrated G56 chipformer supports predictable chip fragmentation and evacuation, which is particularly important when machining sticky or heat‑sensitive alloys. Reliable chip control reduces tool re‑adjustment and machine downtime, improving overall process efficiency. Combined with the Tiger‑tec Gold system, the insert fosters repeatable performance across batches, helping achieve stable cycle times and fewer rejects during series production. Practical application notes and selection guidance This insert is recommended for operations where stainless steel or superalloys impose thermal and mechanical demands on the tool. Selection of cutting strategy and feed per tooth should match the component material and machine rigidity; the insert’s coated grade and geometry make it a solid choice for both roughing and semi‑finishing operations on demanding alloys. For specific machine‑tool pairings or detailed parameter recommendations, technical consultation is available to ensure optimal integration into existing cutting processes. For tailored advice or to order the ADMT10T308R-G56 WSM35G insert by Walter Tools, contact Metav Werkzeuge for application support and availability via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical data Article number: ADMT10T308R-G56-WSM35G-WALTER Item designation: ADMT10T308R-G56 WSM35G Manufacturer: Walter Tools Numeric data Free angle: 15° Corner radius: 0.8 mm Plate shape: Parallelogram 85° Plate size: 10 Thickness: T3 Tolerance class: M Materials & special features Series: Tiger‑tec Gold Grade: WSM35G (coated cemented carbide) Chipformer: G56 Suitable for: stainless steel; heat‑resistant superalloys and titanium (S / M) Substrate material: S / M FAQ What materials is this insert designed for? The ADMT10T308R-G56 WSM35G milling insert from Walter Tools is designed for stainless steel and for heat‑resistant superalloys and titanium, matching the WSM35G grade and Tiger‑tec Gold coating. What advantages does the Tiger‑tec Gold system provide? Tiger‑tec Gold increases thermal stability and wear resistance on the cutting edge; the ADMT10T308R-G56 WSM35G insert benefits from these properties to maintain performance when machining demanding materials. How does the G56 chipformer affect machining? The G56 chipformer on this insert promotes controlled chip breakage and evacuation, reducing the risk of entangling chips and improving process reliability for longer production cycles. Which geometric features support stability during milling? The parallelogram 85° shape combined with a 15° free angle and a 0.8 mm corner radius gives the ADMT10T308R-G56 WSM35G insert mechanical stability and even load distribution, lowering the risk of chipping and supporting consistent surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world‑leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned only for clarification; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer.
ADMT10T308R-G56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a precise parallelogram geometry for stable chip control and extended tool life; order directly via Metav Werkzeuge or consult the team for application-specific advice. ADMT10T308R-G56 WSP45G indexable milling insert — Tiger·tec Gold, for steel, stainless and high-temperature alloys (Walter Tools) The ADMT10T308R-G56 WSP45G is an indexable milling insert designed for versatile milling operations, combining a tough PVD-coated grade with a secure parallelogram seat and chip control suitable for demanding materials Tiger·tec Gold PVD-coated grade WSP45G Suitable for steel, stainless and superalloys Parallelogram 85° shape for secure clamping 15° relief angle with 0.8 mm corner radius Durable coating for consistent productivity The insert utilises the Tiger·tec Gold technology: a PVD-coated carbide that balances wear resistance and edge toughness. This combination supports stable chip formation across a wide range of cutting conditions, reducing unplanned tool changes and improving uptime. The WSP45G grade has been developed for milling and is especially effective where mixed batches of steel and more demanding alloys are processed. In practice, the coating reduces flank wear and helps maintain dimensional stability over longer tool lives, which in turn supports predictable process planning and lower per-part tooling costs. Geometry engineered for secure clamping and predictable results A parallelogram 85° plate form provides a robust clamping interface that minimises insert movement under load and improves repeatability. The geometry, together with a 15° relief angle and 0.8 mm corner radius, is tuned for reliable edge strength and favourable load distribution during intermittent cuts. The integrated chipbreaker G56 controls chip flow to reduce heat concentration at the cutting edge and to promote consistent surface finish. The plate thickness (T3) contributes to mechanical rigidity, allowing stable feeds and cutting depths that preserve both tool life and component quality. Broad material applicability and practical application notes The WSP45G grade targets the ISO groups P / M / S — unalloyed and alloyed steel, stainless steel, and heat-resistant superalloys or titanium — making the insert a versatile choice for mixed-production environments. Its toughness and thermal resilience make it suitable for operations where heat and built-up edge are a concern. For best results, combine the insert’s geometry and chipbreaker with appropriate feed rates and coolant strategy for the workpiece material; the result is improved process security and reproducible surface quality. The Walter Tools series offers predictable behaviour in both roughing and semi-finishing milling tasks, supporting streamlined machining workflows. Discuss Walter Tools Tiger·tec Gold inserts with Metav Werkzeuge for tailored recommendations and to specify the best grade and geometry for the intended application — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: ADMT10T308R-G56-WSP45G-WALTER Designation: ADMT10T308R-G56 WSP45G Series: Tiger·tec Gold Brand: Walter Tools Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 10 mm Plate thickness: T3 Plate form: Parallelogram 85° Chipbreaker: G56 Tolerance class: M Special features Coating: PVD-coated cemented carbide Grade: WSP45G Material applicability: P / M / S (steel, stainless steel, superalloys/titanium) Designation details: ADMT10T308R-G56 Series description: Tough, versatile PVD grade optimised for milling FAQ What materials is this insert suitable for? The ADMT10T308R-G56 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for steel, stainless steel and heat-resistant superalloys including titanium. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold provides wear resistance and edge stability; the coating on the WSP45G grade helps extend tool life and supports consistent chip formation under varying cutting conditions. What advantages does the parallelogram 85° shape offer? The 85° parallelogram geometry improves clamping security and repeatability, which reduces the risk of insert movement under load and contributes to more consistent machining results. Is the chipbreaker suitable for both roughing and finishing? The G56 chipbreaker is designed to control chip flow and heat at the cutting edge, making it effective for a range of milling tasks from robust material removal to controlled semi-finishing passes. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT10T312R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WKP35G grade for extended edge life and consistent chip control when machining steel and cast iron; the parallelogram 85° geometry and 15° clearance support stable cutting conditions. Order the ADMT10T312R-F56 WKP35G directly via Metav Werkzeuge or consult our specialists for process-adapted recommendations. ADMT10T312R-F56 WKP35G milling indexable insert — Tiger·tec Gold, for steel and cast iron (Walter Tools) The ADMT10T312R-F56 WKP35G is a parallelogram 85° milling insert designed for productive chip control and robust edge life in steel and cast iron applications. Tiger·tec Gold coating for extended tool life Optimised for steel and cast iron machining Parallelogram 85° form with 15° clearance Corner radius 1.2 mm for robust edge strength F56 chipbreaker for controlled chip formation Maximised productivity through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G coated carbide grade delivers measurable gains in tool life and process reliability. The coating technology reduces abrasive wear and improves heat resistance, so cutting edges retain geometrical integrity for longer periods; this translates into fewer tool changes and higher machine uptime. The economic benefit is direct: improved tool life reduces tooling costs per component while sustaining consistent dimensional accuracy during longer tool cycles. Stable cutting geometry for repeatable results The insert’s parallelogram 85° form and 15° clearance angle deliver secure seat stability and predictable cutting forces, which is especially valuable in interrupted cuts and heavy roughing. The 1.2 mm corner radius increases edge robustness and resists chipping under fluctuating loads, while the F56 chipbreaker is optimised to produce short, controlled chips when machining steels and cast irons. These geometry choices reduce vibration and help maintain a steady surface finish, supporting higher metal removal rates without sacrificing process security. Application spectrum and process advice for industrial use Designed for the ISO P and K groups, this indexable insert suits a broad range of unalloyed and alloyed steels as well as cast iron. The insert is supplied in the series Tiger·tec Gold and the specific grade WKP35G, which is tuned for the typical thermal and mechanical demands of these materials. For machining plans requiring high cutting speeds or abrasive cast iron types, the insert’s coating and chip control characteristics contribute to consistent performance. For tailored recommendations on feeds, speeds and clamping, Metav Werkzeuge’s technical advisers can provide machining parameters matched to machine rigidity and workpiece material. Contact Metav Werkzeuge for tailored tool selection and application support on Walter Tools Tiger·tec Gold inserts to ensure optimal machining performance Technical Data Article number: ADMT10T312R-F56-WKP35G-WALTER Designation: ADMT10T312R-F56 WKP35G Product type: Fräswendeschneidplatte (milling indexable insert) Brand: Walter Tools Series: Tiger-tec Gold Facts Free angle: 15° Corner radius: 1.2 mm Plate form: Parallelogramm 85° Plate size: 10 Plate thickness: T3 Tolerance class: M Special features Chipbreaker: F56 Grade: WKP35G (coated carbide) Material suitability: P (steel), K (cast iron) Material designation: P / K FAQ What materials is this insert suitable for? The ADMT10T312R-F56 WKP35G is designed for ISO groups P and K, making it suitable for machining a wide range of steels and cast irons. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating on the WKP35G grade reduces abrasive wear and improves heat resistance, which prolongs edge life and maintains cutting performance under demanding conditions. What benefits does the 85° parallelogram form provide? The parallelogram 85° form offers secure seating and predictable cutting forces, improving stability in interrupted cuts and enabling consistent results in roughing operations. Is the F56 chipbreaker suitable for long continuous cuts? The F56 chipbreaker is optimised for controlled, short chip formation in steels and cast irons, supporting both interrupted and continuous cutting where effective chip control is required. Which specifications are important when replacing existing inserts? Match the designation ADMT10T312R-F56 WKP35G and the plate form (parallelogram 85°), corner radius (1.2 mm) and thickness (T3) to ensure compatibility with the tool holder and intended cutting strategy. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
ADMT10T312R-F56 WKP35S Wendeplatten - Walter Tools
The combination of the Tiger-tec Silver coating and the WKP35S grade delivers high process security and long tool life for demanding steel and cast iron operations; the parallelogram 85° geometry with a 15° free angle and r1.2 corner radius ensures stable depth cutting and consistent surface results. Order the ADMT10T312R-F56 WKP35S directly via Metav Werkzeuge or consult the technical team for application-specific advice. ADMT10T312R-F56 WKP35S milling indexable insert — Parallelogram 85°, r1.2 — Walter Tools The ADMT10T312R-F56 WKP35S is a parallelogram 85° milling insert engineered for productive roughing and semi-finishing of steel and cast iron components in industrial milling applications Tiger·tec Silver coating, WKP35S grade Designed for steel and cast iron machining Parallelogram 85° geometry for depth cuts 15° free angle and r1.2 corner radius Chipbreaker F56 for reliable chip control Optimised cutting performance for steel and cast iron The coated carbide WKP35S grade from the Tiger-tec Silver family is formulated to manage the thermal and abrasive conditions typical of machining steel and cast iron. The combination of a wear-resistant coating and a robust substrate provides predictable flank wear behaviour and extended edge life, which reduces unplanned tool changes and increases machine uptime. This results in a more economical process where the balance between cutting speed, feed and insert life is optimised for repeatable parts production. Stable geometry that supports deeper cuts and consistent finishes The parallelogram 85° shape with a 15° free angle and an r1.2 corner radius delivers mechanical stability and controlled engagement of the cutting edge. Such geometry helps to distribute cutting forces evenly and to limit vibration during heavier passes, which benefits surface quality and dimensional accuracy. The F56 chipbreaker promotes short, controlled chips, reducing the risk of chip re-cutting and improving cycle reliability on interrupted or continuous cuts. Coating technology and economical productivity The Tiger-tec Silver coating technology is designed to offer improved heat resistance and friction behaviour compared with uncoated grades, enabling higher cutting speeds in many steel and cast iron applications. The coated surface reduces adhesive and abrasive wear, contributing to a longer service interval and fewer insert changes. By lowering tool-change frequency and stabilising process windows, the insert supports cost-effective machining without compromising repeatability. Contact Metav Werkzeuge today for tailored cutting data and availability of Walter Tools ADMT10T312R-F56 WKP35S inserts Technical data Article number: ADMT10T312R-F56-WKP35S-WALTER Item label: Fräswendeschneidplatte ADMT10T312R-F56 WKP35S Walter Tools Manufacturer: Walter Tools Facts Insert size: 10 Free angle: 15° Corner radius: 1.2 mm Thickness: T3 Shape: Parallelogram 85° Tolerance class: M Special features Grade/series: Tiger-tec Silver, WKP35S Chipbreaker: F56 Material group: coated carbide (P / K) Suitable for: steel (P) and cast iron (K) FAQ Which materials are suitable for this insert? The ADMT10T312R-F56 WKP35S from Walter Tools is specified for machining steel (P) and cast iron (K) according to the grade characteristics of the WKP35S Tiger-tec Silver family. What machining tasks suit the parallelogram 85° geometry? Parallelogram 85° geometry is recommended for stable roughing and semi-finishing where controlled depth of cut and deflection resistance are required; the ADMT10T312R-F56 WKP35S benefits heavy engagement passes and interrupted cuts. How does the F56 chipbreaker affect chip control? The F56 chipbreaker is engineered to produce short, manageable chips in a wide range of feeds and depths, improving process reliability and reducing the risk of chip interference during continuous milling with the WKP35S grade. Can the insert be used for finishing operations? While primarily designed for productive machining, the combination of r1.2 corner radius and the Tiger-tec Silver coating can deliver acceptable surface quality in semi-finishing; for ultra-fine finishing, consider a dedicated finishing geometry. What are the key advantages of the Tiger-tec Silver coating on this insert? Tiger-tec Silver provides improved thermal resistance and abrasion control, enabling higher cutting speeds and longer edge life for the WKP35S grade in many steel and cast iron applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. No affiliation between Metav Werkzeuge and the named brands is implied. The offered item is an original, factory-new product of the manufacturer.
ADMT10T312R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSM35G grade for secure chip control and extended tool life; order the ADMT10T312R-F56 WSM35G milling insert directly via Metav Werkzeuge or ask the consultants for application advice. ADMT10T312R-F56 WSM35G milling insert by Walter Tools — Tiger·tec Gold for rostfreier Stahl and superalloys ADMT10T312R-F56 WSM35G is a precision milling indexable insert designed for demanding applications in rostfreier Stahl and heat-resistant superalloys, offering a robust cutting geometry and a high-performance coating. Tiger·tec Gold coating for stable edge life WSM35G grade for rostfreier Stahl and superalloys Parallelogram 85° shape for versatile milling 15° relief angle with 1.2 mm corner radius High-performance coating and grade for longer productive runs The combination of the Tiger·tec Gold technology and the WSM35G carbide grade delivers stable cutting-edge behaviour under thermal and mechanical stress. This coating system reduces flank wear and improves resistance to built-up edge, which translates into fewer tool changes and higher machine utilisation. For production managers the result is a measurable increase in process stability and predictable tool life when machining rostfreier Stahl and comparable difficult-to-cut alloys. Geometry engineered for secure chip control and surface quality The parallelogram 85° plate form with a 15° relief angle and 1.2 mm corner radius supports gentle engagement and robust cutting edge support. The geometry helps to distribute cutting forces and promotes consistent chip formation, reducing vibration and improving surface finish. In practical terms, the insert’s shape and edge radius provide reliable repeatability across batches, lowering the risk of rejects and secondary operations. Application range and material compatibility Designed for heavy-duty and heat-prone materials, this indexable insert is optimised for the ISO groups S and M — notably rostfreier Stahl and heat-resistant superalloys including titanium alloys. The coated carbide substrate resists high temperatures and maintains edge integrity during interrupted or continuous cuts. This makes the insert a suitable choice for aerospace components, medical parts and industrial valves where material characteristics demand both thermal stability and edge robustness. Productivity advantages and process security By selecting a Tiger·tec Gold-coated milling insert in the WSM35G grade, workshops benefit from enhanced productivity and reduced downtime. The insert’s combination of wear resistance and stable chip formation supports longer tool life and consistent component quality. Backed by Walter Tools’ design focus on process reliability, the solution contributes to fewer adjustments on the machine and a steadier production rhythm — an outcome that improves overall manufacturing efficiency and confidence in repeatable results. Contact Metav Werkzeuge for application-specific recommendations and request Walter Tools ADMT10T312R-F56 WSM35G inserts for precision machining of rostfreier Stahl and high-temperature alloys Technical data Article number: ADMT10T312R-F56-WSM35G-WALTER Designation: ADMT10T312R-F56 WSM35G Series: Tiger·tec Gold Grade: WSM35G Core data Relief angle: 15° Corner radius: 1.2 mm Plate size: 10 mm Thickness: T3 Plate form: Parallelogram 85° Tolerance class: M Special features Coating: coated carbide (Tiger·tec Gold) Material suitability: S / M Suitable for: rostfreier Stahl (M), superalloys and titanium (S) Chipbreaker: F56 Application: milling indexable insert FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The ADMT10T312R-F56 WSM35G insert is specifically graded and coated for effective performance in rostfreier Stahl, supporting stable chip formation and improved edge life. What effect does the 1.2 mm corner radius have on machining? A 1.2 mm corner radius increases edge strength and contributes to smoother surface finishes under heavy cutting conditions; it reduces the likelihood of edge chipping during interrupted cuts. Which materials are covered by the S / M designation? The S / M designation indicates suitability for heat-resistant superalloys and titanium (S) as well as rostfreier Stahl (M), making the insert versatile for demanding alloy machining. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold enhances thermal resistance and wear performance, which leads to longer tool life, fewer changes and more consistent part quality across production runs. What cutting geometry does the parallelogram 85° form support? The parallelogram 85° form enables versatile approach angles for face and shoulder milling operations while providing robust support for the cutting edge and predictable chip evacuation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
ADMT10T312R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, versatile suitability for Stahl, rostfreier Stahl and heat‑resistant superalloys, and reliable chip control via the F56 chipbreaker for consistent milling results; order the ADMT10T312R-F56 WSP45G milling insert directly via Metav Werkzeuge or ask our consultants if needed. ADMT10T312R-F56 WSP45G milling insert — Tiger·tec Gold, 85° parallelogram, Walter Tools The ADMT10T312R-F56 WSP45G is a Tiger·tec Gold‑grade milling insert designed for productive finishing and semi‑finishing in demanding industrial milling applications. Tiger·tec Gold PVD coating for edge stability Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 85° form with 1.2 mm corner radius Chipbreaker F56 for secure chip control Longer, more predictable tool life for continuous production The PVD‑coated Tiger·tec Gold grade WSP45G provides a balanced combination of toughness and wear resistance, making it well suited to interrupted cuts and mixed workpiece batches. The advanced coating reduces flank wear and supports a stable cutting edge, which translates into fewer tool changes and less unplanned downtime. With a corner radius of 1.2 mm and a 15° clearance angle, the insert maintains strength at the cutting edge while delivering consistent surface quality. This results in measurable gains in process reliability and repeatability for production environments. Secure chip control and dimensional stability for reliable cycles The integrated chipbreaker F56 and the parallelogram 85° geometry are engineered to control chip formation across a range of cutting conditions. The chipbreaker promotes predictable chip flow and reduces the risk of built‑up edge, while the parallelogram form improves positional stability in the pocket. Combined with the insert’s nominal thickness T3, these design elements reduce vibration and support repeatable results—especially during heavy engagement or variable feed rates—helping to maintain cycle times and quality standards in serial manufacturing. One insert for diverse, high‑demand materials Optimised for the ISO groups P / M / S, the grade supports machining of Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium alloys. The composition of the coated carbide ensures thermal stability and edge robustness when cutting materials that generate high temperatures or demand secure chip evacuation. For shops that run mixed lots or switch between stainless and high‑temperature alloys, the insert offers a cost‑effective route to fewer tool variants and simpler tool management, without compromising surface finish or component tolerances. Contact Metav Werkzeuge for an application assessment and availability of Walter Tools ADMT10T312R-F56 WSP45G inserts and tailored machining recommendations Technical data SKU: ADMT10T312R-F56-WSP45G-WALTER Product: ADMT10T312R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 1.2 mm Clearance angle: 15° Parallelogram angle: 85° Plate size: 10 Thickness: T3 Special features Coating: Tiger·tec Gold (PVD) Chipbreaker: F56 Grade: WSP45G (coated carbide) Toleranzklasse: M Material suitability: P / M / S (Stahl, rostfreier Stahl, superalloys / titanium) Form: Parallelogramm 85° FAQ Which materials are recommended for this insert? The ADMT10T312R-F56 WSP45G is specified for ISO groups P / M / S, meaning it is suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium alloys. What benefit does the Tiger·tec Gold coating provide? Tiger·tec Gold is a PVD coating that increases wear resistance and thermal stability, giving the WSP45G grade improved edge life and consistent performance under elevated cutting temperatures. How does the F56 chipbreaker affect machining? The F56 chipbreaker is designed to produce predictable chip forms and controlled evacuation, which reduces the risk of built‑up edge and supports stable cutting forces during continuous production. What geometry advantages does the parallelogram 85° form offer? The 85° parallelogram form improves pocket seating and cutting orientation, enhancing dimensional stability and allowing effective engagement angles for face and shoulder milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer.
ADMT10T316R-F56 WKP35G Wendeplatten - Walter Tools
Combining Tiger·tec Gold coating with the WKP35G grade delivers improved wear resistance and consistent chip control when machining steel and cast iron; the parallelogram 85° geometry and 1.6 mm corner radius provide robust edge strength and stable performance. Order the ADMT10T316R-F56 WKP35G milling insert via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT10T316R-F56 WKP35G milling insert for steel and cast iron by Walter Tools ADMT10T316R-F56 WKP35G is a high-performance milling indexable insert optimised for general milling of steel and cast iron, combining Tiger·tec Gold coating technology with a robust parallelogram geometry. Tiger·tec Gold coated carbide grade WKP35G Optimised for steel and cast iron machining Parallelogram 85° geometry, 1.6 mm corner radius Proven wear resistance for demanding milling The coated cemented carbide grade WKP35G from the Tiger·tec Gold family is designed to withstand the thermal and mechanical stresses typical of steel and cast iron machining. The coating improves oxidation resistance and reduces flank wear, which translates into longer tool life and fewer index changes. For workshops that demand predictable performance, the insert’s combination of a high-grade coating and tungsten-carbide substrate gives measurable benefits in process stability and consistent surface finish. This is particularly relevant for interrupted cuts and mixed-batch production where tool reliability reduces downtime and contributes to overall productivity. Stable chip control and cutting geometry benefits The parallelogram 85° form and the F56 chipbreaker are engineered to produce controlled chip formation across a wide range of feeds and depths of cut. The insert’s 15° relief angle reduces rubbing and helps maintain a sharp cutting edge under load, while the 1.6 mm corner radius provides a balance between edge strength and finish quality. For applications in the ISO P and K groups, this geometry supports reliable evacuation of chips and lowers the risk of built-up edge or vibration, leading to repeatable results and improved cycle times. The result is a more efficient machining process with fewer rejects and consistent component tolerance adherence. Practical selection and workshop application guidance Selection of the ADMT10T316R-F56 WKP35G should focus on matching the grade and geometry to the work material and machining strategy. The WKP35G grade is suited for both steel (ISO P) and cast iron (ISO K), making it a versatile choice when a single insert must cover varied jobs. The T3 thickness and M tolerance class support secure clamping and repeatable positioning in common milling cutters. For milling sequences that alternate between roughing and finishing, the insert’s wear behaviour and chip control permit extended tool life while preserving surface quality. When in doubt about the most efficient cutting parameters, a brief consultation on feed and speed for specific alloys will optimise results and protect tool investment. Contact Metav Werkzeuge for tailored recommendations and availability of Walter Tools Tiger·tec Gold inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ADMT10T316R-F56-WKP35G-WALTER Designation: ADMT10T316R-F56 WKP35G Series: Tiger-tec Gold Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 1.6 mm Insert size: 10 Thickness: T3 Tolerance class: M Special features Grade: WKP35G Coating: Tiger·tec Gold (coated cemented carbide) Chipbreaker: F56 Geometry: Parallelogram 85° Material compatibility: Steel (P) and Cast iron (K) FAQ Which materials is this insert suitable for? The ADMT10T316R-F56 WKP35G insert by Walter Tools is suitable for machining steel (ISO P) and cast iron (ISO K) as indicated by its WKP35G grade and Tiger·tec Gold coating. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold increases oxidation and wear resistance on the cutting edge, improving the ADMT10T316R-F56 WKP35G insert’s life and stabilising machining conditions for more consistent finishes. What benefit does the parallelogram 85° geometry provide? The parallelogram 85° shape offers favourable cutting angles for face and shoulder milling, improving engagement control and supporting efficient chip evacuation with the F56 chipbreaker. Is the 1.6 mm corner radius suitable for finishing operations? A 1.6 mm corner radius on this insert balances edge strength and surface quality, making it appropriate for medium finishing where a robust edge and good finish are required. What tolerance and thickness specifications are relevant for tool holders? The insert comes in thickness T3 with tolerance class M, ensuring precise seating and repeatable positioning in compatible milling cutters for reliable clamping. The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and brand names are mentioned for clarification; the offered article is original and brand new. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT10T316R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a 15° relief angle and a 1.6 mm corner radius for consistent cutting performance and long tool life; order via Metav Werkzeuge or contact the team for application advice. ADMT10T316R-F56 WKP35S — milling indexable insert, Tiger·tec Silver, for steel and cast iron (Walter Tools) The ADMT10T316R-F56 WKP35S is a parallelogram milling insert engineered for productive machining of steel and cast iron, offering a 15° relief angle and a robust 1.6 mm corner radius for reliable edge strength. Tiger·tec Silver coating for stable cutting Suited for steel and cast iron machining Parallelogram 85° form for versatile indexing 1.6 mm corner radius for robust edge High process reliability for steel and cast iron The coated carbide grade WKP35S from the Tiger·tec Silver series delivers high process reliability when machining steels and cast-iron grades. The combination of a wear-resistant coating and a substrate optimised for typical steel heat generation reduces flank wear and extends the interval between index changes. For production environments this means fewer interruptions and more consistent component quality, supporting predictable cycle times and better throughput. Geometry that increases productivity and tool life The parallelogram 85° shape and the 15° relief angle promote stable engagement and simpler insert indexing, while the F56 chipbreaker controls chip form across a variety of cutting conditions. The 1.6 mm corner radius strengthens the cutting edge against impact and contributes to a more even wear pattern. For workshop planners and process engineers, these geometric choices translate into a balance between feed rates and surface quality, enabling efficient metal removal without sacrificing component finish. Practical advantages and easy integration into existing toolholders As a standard indexable insert in size 10 with thickness designation T3, the insert fits common Walter toolholders designed for this geometry and can be integrated without special adapters. The insert’s tolerance class M ensures repeatable seating and positioning in the pocket, which supports stable runout and consistent dimensional results. The explained terms—such as chipbreaker, relief angle and corner radius—refer respectively to chip control features, the angle that clears the workpiece behind the cutting edge, and the rounded edge that resists chipping; understanding these helps in selecting cutting parameters for the best economy. For technical clarification, quantity inquiries or tailored recommendations on the Walter Tools ADMT10T316R-F56 WKP35S, please contact Metav Werkzeuge for expert advice and rapid delivery options Technical data Article number: ADMT10T316R-F56-WKP35S-WALTER Manufacturer: Walter Tools Facts Insert size: 10 Thickness: T3 Corner radius: 1.6 mm Relief angle: 15° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Material suitability: P / K (steel and cast iron) Insert form: Parallelogram 85° Chipbreaker: F56 Designation: ADMT10T316R-F56 WKP35S FAQ What materials is this insert designed for? The ADMT10T316R-F56 WKP35S is specified for machining steel and cast iron (designation P / K) and is optimised via the Tiger·tec Silver coating for those material groups. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and thermal stability, which enhances consistency and tool life during serial machining with Walter Tools inserts. Which geometric features improve chip control? The combination of the F56 chipbreaker and the parallelogram 85° form helps to control chip formation and evacuation, supporting secure machining cycles with stable surface results. Is the insert compatible with standard Walter toolholders? Yes, the ADMT10T316R-F56 WKP35S is produced in a common size (10) and thickness (T3) intended for Walter toolholders matching the parallelogram ADMT geometry. What does the tolerance class M mean for workshop use? Tolerance class M indicates standard dimensional accuracy for reliable seating in the tool pocket, contributing to repeatable positioning and consistent machining outcomes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned exclusively for explanation purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand‑new product from the manufacturer.
ADMT10T316R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the robust WSM35G grade and a precise parallelogram 85° geometry for reliable machining of stainless steels and heat-resistant alloys; order directly via Metav Werkzeuge or consult our specialists for application support. ADMT10T316R-F56 WSM35G indexable milling insert — Tiger·tec Gold, 1.6 mm corner radius — Walter Tools The ADMT10T316R-F56 WSM35G is an indexable milling insert designed for demanding machining of stainless steels and heat‑resistant superalloys, combining a Tiger·tec Gold coating with a chipbreaker engineered for stable chip formation. Tiger·tec Gold coating technology Grade WSM35G for stainless & superalloys Parallelogram 85° shape, 15° clearance 1.6 mm corner radius, chipbreaker F56 High-performance grade for difficult-to-machine materials The WSM35G grade, featuring Tiger·tec Gold coating, is formulated to improve process security when working with tough alloys. Its coated cemented‑carbide composition supports stable cutting edges and reduced built‑up edge tendency in stainless steels (ISO group M) and in heat‑resistant superalloys or titanium (ISO group S), depending on the chosen insert geometry. The result is improved tool life and consistent part quality, which translates directly into fewer tool changes and higher throughput in serial production. Geometry and chip control for consistent surface quality The insert’s parallelogram 85° form combined with a 15° relief angle creates favourable cutting forces for milling operations where rigidity and accessibility matter. The 1.6 mm corner radius increases edge strength and contributes to a uniform surface finish, while the chipbreaker F56 manages swarf effectively to avoid entanglement and thermal build‑up. These geometric choices help maintain dimensional accuracy during interrupted cuts and permit productive machining strategies without compromising component integrity. Application guidance and process reliability Marked tolerance class M and the listed applicability S / M indicate suitability primarily for stainless steels and for heat‑resistant superalloys or titanium, depending on component demands and tool configuration. This insert is appropriate where secure chip formation and a robust cutting edge are needed under elevated thermal load. For process integration and holder compatibility, technical clarifications or cutting parameter recommendations are available on request. Are there uncertainties about whether this insert suits a specific task or are additional technical data required? Please contact our team by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored advice. Contact Metav Werkzeuge today to discuss application‑specific recommendations and availability for the Walter Tools ADMT10T316R-F56 WSM35G indexable milling insert. Technical Data Article number: ADMT10T316R-F56-WSM35G-WALTER Designation: ADMT10T316R-F56 Series: Tiger·tec Gold Grade: WSM35G Brand: Walter Tools Numerical Data Corner radius: 1.6 mm Relief angle: 15° Shape: Parallelogram 85° Size: 10 Thickness: T3 Tolerance class: M Special features Chipbreaker: F56 Material applicability: S / M Suitable for: stainless steels, heat‑resistant superalloys and titanium (depending on geometry) Coating technology: Tiger·tec Gold FAQ Which materials is this insert suitable for? The ADMT10T316R-F56 WSM35G insert from Walter Tools is specified for stainless steels (ISO group M) and for heat‑resistant superalloys/titanium (ISO group S), with application depending on the chosen geometry and cutting conditions. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WSM35G grade improves thermal resistance and wear behaviour, supporting stable cutting edges and better chip control during extended milling cycles. What effect does the 1.6 mm corner radius have? A 1.6 mm corner radius increases edge strength and helps achieve a consistent surface finish; it is particularly beneficial where a balance between tool life and workpiece geometry is required. Which insert features control chip formation? Chip formation is managed by the F56 chipbreaker in combination with the parallelogram geometry and the Tiger·tec Gold coating, together providing secure swarf flow and reduced risk of built‑up edge. What is the SKU and series information? The SKU is ADMT10T316R-F56-WSM35G-WALTER, belonging to the Tiger·tec Gold series by Walter Tools; refer to this identifier when enquiring about supply or holder compatibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT10T316R-F56 WSM45X T Wendeplatten - Walter Tools
Take advantage of the proven combination of WSM45X coated carbide for stable chip formation and the robust 85° parallelogram geometry to increase process reliability and milling throughput; order the ADMT10T316R-F56 WSM45X directly via Metav Werkzeuge or ask our consultants if needed ADMT10T316R-F56 WSM45X — Indexable milling insert for stainless steel and superalloys (Walter Tools) The ADMT10T316R-F56 WSM45X is a coated carbide milling insert engineered for demanding operations on stainless steels and heat‑resistant superalloys, offering stable cutting edges and consistent chip control in high‑stress milling applications Coated carbide grade WSM45X Optimised for stainless steel and superalloys Parallelogram 85° insert form 1.6 mm corner radius for edge strength Performance gains when machining difficult materials The Walter grade WSM45X combines a coated carbide substrate with a chemistry tuned for thermally demanding cutting tasks, delivering stable chip formation and improved edge retention when milling stainless steel and high‑temperature alloys. This engineered composition reduces the tendency for built‑up edge and supports longer productive cutting intervals, which in turn raises component throughput and reduces unplanned tool changes. The result is measurable efficiency: more consistent cycle times and fewer interruptions in serial production. Geometry that secures surface quality and tool life The insert’s 85° parallelogram shape and 15° relief angle are designed for secure clamping in indexable milling cutters and for favourable cutting forces in shoulder and face milling. The F56 chipbreaker promotes predictable chip flow and reduces heat concentration at the cutting edge, while the 1.6 mm corner radius increases mechanical edge stability under interrupted cuts. Together these geometric features contribute to reproducible surface finish and longer life of the cutting edge, so single‑insert performance translates into process reliability across production runs. Workshop practicality and application range As a member of Walter’s open series, the WSM45X grade is a coated carbide solution intended for ISO groups M and S, meaning it is particularly suited to stainless steel and heat‑resistant superalloys (and, depending on geometry, titanium). The insert format ADMT10T316R‑F56 supports easy indexing and replacement, minimising downtime in cell or shop‑floor settings. For plants seeking to standardise tooling for demanding alloys, this insert offers a balance of edge life and chip control that helps secure reproducible component quality and increased machine utilisation. For further specification matching and grade selection guidance, Metav Werkzeuge consultants can advise on ideal cutting parameters and holder compatibility. Contact Metav Werkzeuge today to reserve Walter Tools ADMT10T316R-F56 WSM45X inserts for stainless‑steel and superalloy applications and secure tailored advice for cutter integration Technical data Article number: ADMT10T316R-F56-WSM45X-WALTER Label: Fräswendeschneidplatte ADMT10T316R-F56 WSM45X Walter Tools Product type: Indexable milling insert Series: Walter Schneidstoffsorte - Serie offen Grade: WSM45X Key figures Insert size: 10 Insert thickness: T3 Relief angle: 15° Corner radius: 1.6 mm Insert shape: parallelogram 85° Tolerance class: M Special features Coating: coated carbide (WSM45X) Chipbreaker: F56 Material groups: suitable for ISO M (stainless steel) and ISO S (superalloys/titanium) Application focus: heavy‑duty machining and demanding stainless‑steel operations FAQ What materials are best suited to this insert? The ADMT10T316R‑F56 WSM45X insert is specified for ISO group M (stainless steel) and ISO S (heat‑resistant superalloys and titanium), providing reliable chip control and edge stability in these materials. Which geometric features improve performance in shoulder milling? The 85° parallelogram shape, 15° relief angle and 1.6 mm corner radius of this insert work together to reduce cutting forces and support stable clamping, enhancing surface quality and tool life during shoulder milling. How does the WSM45X grade affect chip formation? WSM45X is a coated carbide formulation that promotes stable chip formation and resists built‑up edge; this leads to fewer interruptions, more consistent cycle times and improved process reliability when cutting stainless steel and superalloys. Can the insert be used in standard ADMT toolholders? The ADMT10T316R‑F56 geometry corresponds to common ADMT parallelogram insert pockets; compatibility is expected with holders designed for ADMT‑style inserts, but verification with the chosen cutter body is recommended. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (market appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names remain the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT10T316R-F56 WSP45G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold WSP45G PVD-coated carbide with the parallelogram 85° geometry and a 1.6 mm corner radius to achieve reliable chip control and extended edge life in both roughing and finishing operations; order the insert via Metav Werkzeuge or contact consultants if further process data are required. ADMT10T316R-F56 WSP45G milling insert (Parallelogram 85°, 15° relief) — Walter Tools The ADMT10T316R-F56 WSP45G milling insert is a versatile, PVD-coated carbide solution designed for milling steel, stainless steel and heat‑resistant alloys in general milling applications. Tiger·tec Gold PVD-coated grade WSP45G Parallelogram 85° insert geometry 15° relief angle for stable chip control 1.6 mm corner radius for robust edges Consistent performance from a high‑temperature PVD grade The WSP45G grade, part of the Tiger·tec Gold series, is a PVD-coated carbide engineered for a balance of toughness and wear resistance. Its microstructure and coating combination promote stable chip formation when machining typical steel grades and the tougher materials listed under ISO group P, M and S. This results in fewer interruptions for edge dressing and contributes directly to predictable tool life and lower overall machining costs. The technical design supports both intermittent and continuous cuts, reducing the risk of edge chipping under variable cutting forces. Geometry engineered to improve process stability and surface quality The insert’s parallelogram 85° form and 15° relief angle provide a secure seating and cutting engagement that favours directional milling strategies. A 1.6 mm corner radius increases edge strength and helps deliver a balanced surface finish during light finishing passes, while still allowing productive material removal in heavier cuts. The combination of geometry and chipbreaker designation F56 promotes controlled chip breaking and evacuation, which is especially beneficial when machining stainless or heat‑resistant alloys where chip control is critical for cycle reliability. Practical advantages for workshop productivity and flexibility This insert is suitable for both roughing and finishing, offering process reliability across steel, stainless steel and superalloys/titanium applications. The robust design minimises downtime for insert changes and supports repeatable set‑ups, making it a pragmatic choice for job shops and production lines seeking consistency. For customers requiring additional cutting data or tailored feed/speed recommendations, Metav Werkzeuge can supply process charts and application advice to match the insert with specific machine and workpiece conditions. For Walter Tools Tiger·tec Gold applications, contact Metav Werkzeuge for availability, process recommendations and delivery options via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data SKU: ADMT10T316R-F56-WSP45G-WALTER Designation: ADMT10T316R-F56 WSP45G Type: milling insert Brand: Walter Tools Grade: WSP45G Facts Corner radius: 1.6 mm Relief angle: 15° Insert size: 10 Thickness: T3 Shape angle: Parallelogram 85° Tolerance class: M Special features Series: Tiger·tec Gold Coating: PVD (Tiger·tec Gold) Material: coated carbide Chipbreaker: F56 Applicable material groups: P (steel), M (stainless steel), S (superalloys / titanium) Applications: versatile roughing and finishing FAQ What materials can be machined with this insert? The ADMT10T316R-F56 WSP45G insert is specified for ISO groups P, M and S, meaning it is suitable for steel, stainless steel and heat‑resistant alloys including titanium. How does the F56 chipbreaker affect machining? The F56 chipbreaker on the WSP45G grade aids controlled chip formation and evacuation, improving consistency in both continuous and interrupted cuts when using the ADMT10T316R-F56 insert. Is this insert suitable for finishing passes? Yes, the 1.6 mm corner radius and the insert geometry support fine finishing passes as well as productive roughing operations with the ADMT10T316R-F56 WSP45G. Which coating technology is used and what is its benefit? The insert uses the Tiger·tec Gold PVD coating, which combines wear resistance and toughness to extend edge life and maintain process stability over long runs. Are there specific seating or clamping recommendations? Secure seating in the correct pocket orientation for a parallelogram 85° insert is essential; ensure the cutter body and clamp are rated for the ADMT10T316R-F56 geometry to maintain repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the brands. The offered article is original and brand new.
ADMT10T320R-F56 WKP35G Wendeplatten - Walter Tools
Benefit from a blend of wear-resistant Tiger·tec Gold coating and the WKP35G grade for steady tool life and predictable machining results; the 15° relief and parallelogram geometry ensure reliable axial milling and good surface finish. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored advice. ADMT10T320R-F56 WKP35G indexable milling insert — Tiger·tec Gold, 15° relief (Walter Tools) ADMT10T320R-F56 WKP35G is an indexable milling insert optimised for steel and cast‑iron machining, combining a coated carbide grade with a chipbreaker tuned for stable chip control. Tiger·tec Gold coating for wear resistance Grade WKP35G for steel and cast iron Parallelogram 85° geometry for axial milling 15° relief angle and 2 mm corner radius Engineered for consistent production performance The combination of Tiger·tec Gold coating and the WKP35G carbide grade provides a robust basis for high‑volume machining of steel and cast iron. The coating improves thermal resistance and reduces abrasive wear, which translates into fewer insert changes and longer uninterrupted cycles. By favouring stable chip formation, the insert supports steady cutting forces and helps maintain machine uptime, making it a rational choice where efficiency and reproducibility are priorities. Predictable edge life and improved surface quality The parallelogram 85° geometry with a 15° relief angle and 2 mm corner radius is designed to deliver a balance between strength and edge sharpness. The geometry supports axial milling operations with controlled cutting engagement, while the integrated F56 chipbreaker assists in producing short, manageable chips on both P (steel) and K (cast iron) workpieces. The result is a more consistent surface finish and fewer disruptive tool changes, directly supporting cost‑effective production. Practical integration and material guidance Small dimensions such as the nominal 10 mm insert size and T3 thickness make this insert suitable for a broad range of standard milling holders; tolerance class M ensures interchangeability within commercial tool systems. The designation P / K indicates compatibility with unalloyed and alloyed steels and with cast‑iron materials according to ISO 513 conventions. For process planning, the grade’s behaviour under typical steel and cast‑iron cutting conditions reduces trial‑and‑error and shortens ramp‑up times on new components. Contact Metav Werkzeuge today for ordering and process recommendations on Walter Tools inserts like ADMT10T320R-F56 WKP35G — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert technical support and reliable supply. Technical data Article number: ADMT10T320R-F56-WKP35G-WALTER Designation: ADMT10T320R-F56 WKP35G Product type: Milling indexable insert Brand: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 2 mm Insert size: 10 mm Thickness: T3 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WKP35G (coated carbide) Chipbreaker: F56 Geometry: Parallelogram 85° Material suitability: Steel (P), Cast iron (K) FAQ Which materials can this insert machine effectively? The ADMT10T320R-F56 WKP35G is specified for steel (P) and cast iron (K) applications, with its grade and coating tailored to the thermal and abrasive demands of these materials. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold increases thermal and abrasive resistance, improving wear life and stability under continuous cutting, which supports longer runtimes and consistent part quality when using this Walter Tools insert. For which milling tasks is the parallelogram geometry suitable? The parallelogram 85° shape is particularly advantageous in axial milling and light shoulder operations, offering stable cutting engagement and good accessibility for machining contours. How does the F56 chipbreaker affect chip control? The F56 chipbreaker produces short, manageable chips in both steel and cast iron, reducing the risk of entanglement and easing evacuation, which contributes to smoother production cycles. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools serves explanatory purposes only; there is no affiliation implied. The offered item is an original, factory‑new product of the manufacturer.
ADMT10T320R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for predictable wear behaviour and broad material coverage; the insert’s parallelogram geometry and chipbreaker F56 support stable cutting and efficient chip control. Order the insert directly via Metav Werkzeuge or ask the technical team for application-specific advice. ADMT10T320R-F56 WKP35S milling insert – Tiger·tec Silver, for steel and cast iron (Walter Tools) ADMT10T320R-F56 WKP35S is a precision milling indexable insert designed for productive machining of steels and cast irons, combining a coated carbide grade with an 85° parallelogram geometry for reliable material removal. Tiger·tec Silver coating for extended tool life WKP35S grade optimised for steel and cast iron Parallelogram 85° geometry for stable cuts Corner radius 2 mm for consistent edge strength Increased process reliability through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP35S grade provides a stable wear pattern and improved resistance to abrasive loading during continuous milling. As a coated carbide solution, the insert offers a controlled interaction with common workpiece materials, which helps to reduce unpredictable flank wear and maintain consistent cutting forces. This results in fewer regrinds, longer tool life and a more reliable production rhythm when machining steel and cast iron. Geometry and edge preparation for consistent surface quality The Parallelogram 85° form, together with the chipbreaker F56 and the 15° relief angle, promotes secure seating in the cutter body and effective chip formation for a wide range of cutting parameters. The corner radius 2 mm balances edge strength and surface finish, while the T3 plate thickness supports rigidity under radial loads. These design choices reduce chatter and help to deliver repeatable dimensional accuracy and a favourable surface condition with every pass. Practical integration and application guidance for production settings Specified for machining groups P and K (steel and cast iron), the insert is suitable for catalogue-dependent applications where a versatile, wear-resistant grade is required. The ADMT10T320R-F56 insert is intended for use in standard milling cutter bodies accepting parallelogram inserts with chipbreaker F56; its properties make it a sound choice where a mix of productivity and tool life is sought. If supplementary cutting data or tailored feeds and speeds are required, Metav Werkzeuge offers technical consultation to align cutting strategies with production targets — contact via info@metav-werkzeuge.com or +49 2822 7131930. Contact Metav Werkzeuge for a machining review to match Walter Tools Tiger·tec Silver inserts to specific production needs or to request application-specific cutting data Technical Data Article number: ADMT10T320R-F56-WKP35S-WALTER SKU: ADMT10T320R-F56-WKP35S-WALTER Product type: Milling insert Brand: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Facts Plate size: 10 Corner radius: 2 mm Relief angle: 15° Plate thickness: T3 Tolerance class: M Special features Parallelogram 85° geometry Chipbreaker F56 Coated carbide (Tiger·tec Silver) Material suitability: P (steel) and K (cast iron) Designation: ADMT10T320R-F56 WKP35S FAQ Is this insert suitable for stainless steel applications? The insert is specified for steel and cast iron (P and K groups); stainless steel capability is not listed for the ADMT10T320R-F56 WKP35S and should be validated with Metav Werkzeuge for specific stainless grades. What are the main advantages of the Tiger·tec Silver coating? The Tiger·tec Silver coating on the WKP35S grade improves wear resistance and heat management, leading to extended tool life and stable cutting behaviour when machining steels and cast irons. Which geometry features support chip control in this insert? The Parallelogram 85° shape combined with chipbreaker F56 and a 15° relief angle promotes predictable chip formation and secure seating in compatible cutter bodies. Can this insert be used in high-feed or heavy-duty roughing operations? The insert’s corner radius 2 mm and robust WKP35S grade suit many productive roughing tasks; however, specific feed and depth parameters should be confirmed against the intended cutter body and machine capability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT10T320R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of a high-performance coated grade and purpose-designed geometry for reliable machining of heat-prone materials; the combination of the Tiger·tec Gold coating and the robust WSM35G grade delivers extended tool life and consistent chip control for stainless steels and superalloys — order directly via Metav Werkzeuge or request technical advice from our consultants. ADMT10T320R-F56 WSM35G Fräswendeschneidplatte by Walter Tools — Parallelogram 85° for stainless steels and superalloys The ADMT10T320R-F56 WSM35G is a parallelogram 85° indexable milling insert designed for heavy-duty and heat-prone machining, offering a coated carbide grade optimised for secure chip formation and stable cutting edges. Tiger·tec Gold coating technology Optimised for stainless steels and superalloys Parallelogram 85° form for versatile orientation 15° clearance and 2 mm corner radius Robust grade for demanding materials and longer tool life The WSM35G grade, part of the Tiger·tec Gold series, is a coated carbide solution formulated for machining difficult-to-cut alloys. It supports secure chip formation and resists edge wear when cutting stainless steels and superalloys, both of which generate high temperatures and challenge cutting edges. The coating reduces diffusion and abrasion, which in turn improves the achievable tool life and lowers the frequency of index changes in serial production. For operators seeking consistent component quality, the result is fewer interruptions and a more predictable process window. Geometry and chip control for stable machining and surface quality With its Parallelogram 85° shape and dedicated chipbreaker F56, this insert promotes reliable chip evacuation and directional flexibility. The geometry combines a 15° clearance with a 2 mm corner radius, improving strength at the cutting edge and enabling better surface finish on interrupted or continuous cuts. These features reduce the risk of built-up edge on heat-resistant materials and help maintain dimensional accuracy in multi-pass operations. The net effect is higher first-pass yield and reduced rework in demanding milling tasks. Shop-floor benefits: integration, repeatability and process security The insert is supplied in a T3 thickness and tolerance class M, suitable for standard clamping systems and ensuring repeatable seating and indexing. Its nominal designation enables straightforward replacement planning and tool management. Because the grade is tailored for materials that conduct heat poorly, the ADMT10T320R-F56 WSM35G supports higher stability at elevated cutting temperatures and contributes to consistent cycle times. For production environments focused on throughput and component integrity, this option balances wear resistance with cost-effective performance. For precise machining of stainless steels and superalloys with the proven Tiger·tec Gold grade, request the Walter Tools ADMT10T320R-F56 WSM35G from Metav Werkzeuge for tailored advice and stock availability — contact Metav Werkzeuge for production-ready recommendations. Technical data SKU: ADMT10T320R-F56-WSM35G-WALTER Designation: ADMT10T320R-F56 WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Core technical data Shape: Parallelogram 85° Clearance angle: 15° Corner radius: 2 mm Thickness: T3 Insert size: 10 Chipbreaker: F56 Tolerance class: M Special features Coated carbide grade Tiger·tec Gold Suitable materials: Stainless steels (M), Superalloys/Titanium (S) Stable chip formation High wear resistance Optimised for heavy and heat-prone machining FAQ What materials is this insert best suited for? The ADMT10T320R-F56 WSM35G is designed primarily for stainless steels and heat-resistant superalloys, offering secure chip control and edge stability when machining these materials. How does the insert geometry affect machining performance? The Parallelogram 85° shape combined with chipbreaker F56, a 15° clearance and 2 mm corner radius supports directional flexibility, reliable chip evacuation and improved surface quality during milling. What production benefits can be expected from this grade? Using the WSM35G grade from the Tiger·tec Gold series typically leads to longer tool life, fewer index changes and greater process stability when machining demanding, heat-prone materials. Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any association between our company and the named manufacturers. The offered article is an original, brand-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com