Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
ADMT180712R-D56 WKK25G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating with the WKK25G grade and the D56 chipbreaker delivers durable performance and reliable chip control for cast‑iron machining; order the insert directly via Metav Werkzeuge or consult the team for application advice. ADMT180712R-D56 WKK25G Fräswendeschneidplatte by Walter Tools — Tiger‑tec Gold, optimised for cast iron ADMT180712R-D56 WKK25G is an indexable milling insert designed for secure seating and efficient material removal in cast‑iron applications. Tiger‑tec Gold coating for extended life Optimised for cast iron machining (K) Parallelogram 85° shape for stable clamping Chipbreaker D56 for short, controlled chips Extended tool life through advanced coating technology The combination of the Tiger‑tec Gold surface treatment and the WKK25G coated carbide composition prioritises resistance to abrasive wear typical of cast‑iron workpieces. This engineered coating maintains cutting edge integrity under frequent, short‑chipping conditions, which means fewer tool changes and longer intervals between indexings. The result is improved process efficiency and predictable tool life, supporting uninterrupted production cycles and lower overall tooling costs. Geometry that stabilises cutting and improves productivity The parallelogram 85° insert form and D56 chipbreaker work together to secure the insert in the cutter body and promote short, easily evacuated chips. The 15° relief angle reduces rubbing at the flank while maintaining a robust cutting edge, and the 1.2 mm corner radius increases edge strength for interrupted cuts. Together these features reduce vibration and rework, translating into steadier feed rates and higher throughput in demanding milling operations. Consistent quality control for series production Specified in tolerance class M, the design ensures dimensional consistency between indexings and across batches, which is essential for repeatable, high‑volume manufacturing. The insert’s properties favour predictable surface finish and repeatable pocketing operations on abrasive cast materials, allowing process planners to rely on stable cycle times and steady component quality rather than frequent parameter adjustments. Practical compatibility and workshop handling Sized as a nominal 18 insert with thickness designation 07, the plate fits commonly used milling bodies and is clearly classified for K (cast iron) applications according to ISO guidance. The grade’s behaviour—optimised for short, breaking chips—simplifies chip management in the machine tool environment and reduces the risk of built‑up edge. The insert is part of Walter Tools’ Tiger‑tec Gold series and is suitable where robust, wear‑resistant performance is required for cast‑iron components in industrial machining. Contact Metav Werkzeuge for tailored cutting data or component‑specific recommendations for this Walter Tools ADMT180712R‑D56 WKK25G milling insert Technical Data Article number: ADMT180712R-D56-WKK25G-WALTER Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKK25G Core dimensions Size: 18 Thickness: 07 Corner radius: 1.2 mm Relief angle: 15° Plate form: Parallelogramm 85° Tolerance: M Design & material features Chipbreaker: D56 Material group: K (cast iron) Coated carbide (beschichtetes Hartmetall) Execution: T FAQ Is this insert suitable for cast‑iron machining? Yes. The ADMT180712R‑D56 WKK25G is specifically optimised for cast‑iron (K) applications, with the WKK25G grade and Tiger‑tec Gold coating tuned to resist abrasive wear and handle short, breaking chips. What benefit does the D56 chipbreaker provide? The D56 chipbreaker promotes short, controlled chips that are easier to evacuate, reducing downtime from chip jams and improving machining reliability when using the ADMT180712R‑D56 WKK25G insert. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength for interrupted cuts and enhances finish quality on cast parts while balancing cutting forces to protect the coated edge. Which cutter bodies accept this insert form? The parallelogram 85° shape of the insert is intended for milling bodies that accommodate ADMT‑style plates; compatible bodies provide secure clamping and correct seat geometry for best performance. What production advantages can be expected from the Tiger‑tec Gold series? Inserts from the Tiger‑tec Gold series deliver extended tool life and consistent wear behaviour, which supports stable cycle times and lower tooling consumption in serial machining of cast‑iron components. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT180712R-D56 WKP25S Wendeplatten - Walter Tools
The combination of coated carbide durability and a geometry tuned for chip control delivers reliable, repeatable milling in steel and cast iron; this reduces tool changes and supports steady production. Order original Walter Tools inserts through Metav Werkzeuge or consult our specialists for application-specific selection. ADMT180712R-D56 WKP25S milling insert — Tiger‑tec Silver coated, for steel and cast iron | Walter Tools The ADMT180712R-D56 WKP25S is a Tiger‑tec Silver coated carbide milling insert engineered for productive face and shoulder milling in steel and cast iron. Tiger‑tec Silver coated carbide for durability Parallelogram 85° shape for versatile milling Optimised D56 chipbreaker for controlled chips Suitable for steel and cast iron machining Higher productivity through material‑matched grade The WKP25S grade, part of the Tiger‑tec Silver series, is a coated carbide formulation developed specifically for the thermal and mechanical demands of machining steel (P) and cast iron (K). The result is a stable cutting edge that tolerates the heat generation typical of steel machining while resisting abrasive wear from cast iron. By matching grade chemistry and coating to the workpiece group, this insert delivers consistent cutting performance and a longer tool life, which translates into fewer tool changes and a more economical machining process. Geometry that controls chips and improves surface results A parallelogram 85° outline combined with a 15° clearance angle creates a cutting geometry that balances rigidity and accessibility in shoulder and face milling operations. The D56 chipbreaker is optimised for producing short, manageable chips in a wide range of feeds, reducing the risk of built‑up edge and improving chip evacuation. The corner radius 1.2 mm contributes to a robust cutting edge that enhances surface finish while absorbing intermittent loading. Together, these features reduce downtime and support reliable part quality when machining both unalloyed and alloyed steels as well as grey and nodular cast irons. Practical handling and application advantages The insert follows common industry dimensions, with the designation ADMT180712R‑D56 and the size code 18, thickness code 07 and tolerance class M, so it fits standard Walter Tools milling holders designed for this family. The insert’s specification supports operations at productive cutting speeds and moderate feeds; when used with appropriate tool holders and stable fixturing, the grade and chipbreaker combination facilitate repeatable results across batch and single‑piece production. Maintenance benefits include fewer regrinds and predictable edge wear, helping to keep cycles on schedule. For technical selection, availability and application recommendations for Walter Tools ADMT180712R‑D56 WKP25S inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, application‑oriented advice and delivery options. Technical data Article number: ADMT180712R-D56-WKP25S-WALTER Designation: ADMT180712R-D56 WKP25S Manufacturer: Walter Tools SKU: ADMT180712R-D56-WKP25S-WALTER Facts Relief / clearance angle: 15° Corner radius: 1.2 mm Shape: Parallelogram 85° Size code: 18 Thickness code: 07 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: D56 Suitable for: Steel (P), Cast iron (K) Series: Tiger‑tec Silver Application: Milling insert (face/shoulder milling) FAQ Which materials are best processed with this insert? The ADMT180712R‑D56 WKP25S insert is optimised for steel (P) and cast iron (K); the WKP25S grade and Tiger‑tec Silver coating address typical heat and abrasion patterns for these materials. What does the D56 chipbreaker achieve in practice? The D56 chipbreaker on this Walter Tools insert is designed to produce short, controllable chips across common feed ranges, improving chip evacuation and reducing the risk of built‑up edge during milling. How does the parallelogram 85° form benefit milling operations? A parallelogram 85° design offers good strength at the cutting edge while allowing access for shoulder and face milling; this geometry, together with the 15° clearance, balances rigidity and cutting accessibility. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer. Walter Tools is the trade name of Walter AG, part of the Sandvik Group.
ADMT180712R-D56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of extended tool life, reliable chip control and versatile application for steel and cast iron to keep production stable and predictable; order the insert directly via Metav Werkzeuge or consult Metav Werkzeuge specialists for application support. ADMT180712R-D56 WKP35G milling indexable insert — Tiger·tec Gold, D56 chipbreaker | Walter Tools The ADMT180712R-D56 WKP35G is a milling indexable insert developed for productive face and shoulder milling in steel and cast iron, combining a Tiger·tec Gold coated grade with a robust D56 chipbreaker for consistent chip control and surface finish. Tiger·tec Gold coating for extended tool life Optimised D56 chipbreaker for stable chip control Parallelogram 85° form for robust milling geometry 1.2 mm corner radius for improved edge strength High-performance coating and grade for predictable machining The insert is equipped with the Tiger·tec Gold coating and the WKP35G coated-carbide grade, designed to deliver extended tool life and reproducible cutting performance. This combination reduces wear under the thermal and mechanical loads typical of machining steel and cast iron, providing a clear efficiency advantage in serial production. The coated-carbide substrate and engineered top layer work together to slow flank and crater wear, thereby reducing tool changes and improving process stability. Geometry and chip control that support surface quality The D56 chipbreaker and the Parallelogram 85° shape provide controlled chip formation and reliable engagement at common milling angles. With a 15° clearance and a 1.2 mm corner radius, the geometry balances edge strength and entry behaviour to maintain a consistent surface finish while resisting chipping. The chipbreaker is tailored to break and evacuate swarf typical of the targeted material groups, which helps to reduce rework and downtime caused by poor chip evacuation. Operational advantages that lower unit costs Standardised dimensions such as the 18 mm size and the thickness code 07 simplify tool inventory and holder selection, contributing to lower tooling management effort. The coated grade supports higher process security through longer tool life, which in turn reduces costs per component and increases productive machine time. Technical consultation and cutting data are available from Metav Werkzeuge to match machining strategies to production goals, ensuring the insert is integrated efficiently into existing workflows. Practical explanation and handling notes for workshop integration As an indexable milling insert, the component is mounted into a dedicated cutter body and indexed when an edge is spent, avoiding the need for regrinding; this makes the solution both economical and easy to implement in shop-floor routines. Proper seating and clamping are essential for achieving the stated performance: clean seating surfaces and the correct clamp torque ensure repeatable positioning and protect the cutting edge. For operators less familiar with insert geometry, the built-in chip control and robust edge radius make the component forgiving under a range of feed and speed conditions. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and request cutting-data recommendations to match specific production requirements Technical Data SKU: ADMT180712R-D56-WKP35G-WALTER Item designation: ADMT180712R-D56 WKP35G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 1.2 mm Insert size: 18 mm Thickness code: 07 Plate form: Parallelogram 85° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WKP35G (coated carbide) Chipbreaker: D56 Material suitability: P / K (steel and cast iron) Series: Tiger·tec Gold Execution: T FAQ What materials is this insert suitable for? The ADMT180712R-D56 WKP35G insert is specified for machining steel and cast iron (material groups P and K), utilising the Tiger·tec Gold grade for those workpiece types. How does the D56 chipbreaker affect machining? The D56 chipbreaker is engineered to manage chip formation for the stated materials, improving evacuation and reducing the risk of built-up edge, which helps to maintain a consistent surface finish with the ADMT180712R-D56 WKP35G. Which geometry features enhance edge strength? The 1.2 mm corner radius together with the Parallelogram 85° form increases edge robustness and reduces the likelihood of chipping during interrupted cuts when using the ADMT180712R-D56 WKP35G insert. Is this insert compatible with standard ADMT toolholders? The insert follows the ADMT series designation and is intended for holders that accept the ADMT180712R-D56 geometry; matching the insert to a suitable cutter body is recommended to exploit the full performance potential of the Walter Tools solution. Where can cutting data or application support be obtained? Application support and cutting recommendations for the ADMT180712R-D56 WKP35G are available from Metav Werkzeuge; technical consultation can help optimise feeds, speeds and tool life for specific production requirements. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and to clarify product compatibility. There is no affiliation or partnership between our company and the trademark owners. The offered article is an original, factory-new product of the manufacturer.
ADMT180712R-D56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for stable chip formation and long tool life; the parallelogram 85° geometry with a 15° relief ensures dependable process security in steel and cast iron machining. Order the insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. ADMT180712R-D56 WKP35S milling insert — Parallelogram 85° for steel & cast iron (Walter Tools) ADMT180712R-D56 WKP35S is a carbide milling insert designed for efficient machining of steel and cast iron in industrial milling applications Tiger·tec Silver coating for long tool life For steel and cast iron machining Parallelogram 85° geometry with 15° relief R1.2 corner radius for robust edge strength Efficient machining through optimised grade and coating The combination of the WKP35S grade and Tiger·tec Silver coating delivers a balance of wear resistance and toughness that is targeted at steel and cast iron applications. This coated carbide formulation reduces flank and crater wear during interrupted cuts, which translates into longer tool life and fewer index changes. For production shops seeking predictable tool performance, the result is higher productivity and reduced downtime through consistent insert life. Reliable chip control and stable cutting geometry The parallelogram 85° insert form and the D56 chipbreaker are configured to manage chip flow and heat dissipation during face and shoulder milling. The 15° relief angle helps maintain cutting stability under varying engagement angles, while the R1.2 corner radius increases edge strength and reduces risk of chipping. These geometric features improve surface finish and reduce machining vibrations, supporting repeatable results even in mixed-production environments. Practical benefits in program and process planning With the compact size code and standard tolerance class M, the indexable insert fits common cutter bodies and clamping systems, easing integration into existing tool assemblies. The designation ADMT180712R-D56 indicates the insert family and geometry, allowing straightforward selection in tool lists and CAM setups. By favouring a grade engineered for both P and K workpiece groups, shops can streamline tooling variants and cut management complexity across jobs involving unalloyed and alloyed steels as well as cast components. Designed for consistent workshop performance The insert is intended for industrial milling tasks where process reliability and stable chip formation are priorities. The coated carbide and chipbreaker combination helps control abrasive wear typical of cast iron while coping with the heat and chip morphology of steels. For manufacturers aiming to maintain cycle times and surface quality, this insert offers a technically sound compromise between wear resistance and toughness, supporting repeatable, economical machining operations. Contact Metav Werkzeuge for tailored application advice and to secure supply of Walter Tools ADMT180712R-D56 WKP35S milling inserts Technical data Article number: ADMT180712R-D56-WKP35S-WALTER Name: Fräswendeschneidplatte ADMT180712R-D56 WKP35S Walter Tools Manufacturer: Walter Tools Facts Insert size: 18 Thickness code: 07 Relief angle: 15° Corner radius: 1.2 mm Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: D56 Geometry: Parallelogram 85° Execution/type: T Material suitability: Steel (P) Material suitability: Cast iron (K) Base designation: ADMT180712R-D56 FAQ What materials is this insert suitable for? The ADMT180712R-D56 WKP35S milling insert from Walter Tools is designed for machining steel (P) and cast iron (K), combining chip control and wear resistance for these workpiece groups. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive wear and improves thermal resistance, which extends the insert life and helps maintain surface finish under continuous milling. Which cutter geometry matches this insert? The parallelogram 85° form with a 15° relief is compatible with milling cutters designed for indexable parallelogram inserts; the ADMT180712R-D56 geometry is standard for such cutter bodies. What advantage does the R1.2 corner radius provide? A 1.2 mm corner radius increases edge strength and reduces the likelihood of chipping during interrupted cuts, improving durability and consistency in component quality when using this insert. Is the chipbreaker suitable for heavy or finishing cuts? The D56 chipbreaker is engineered to balance chip fragmentation and evacuation, making it effective across a range of cutting depths; final selection should consider cutting parameters and workpiece characteristics. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered product is an original, brand-new item from the manufacturer Walter Tools.
ADMT180712R-D56 WSP45G Wendeplatten - Walter Tools
Take advantage of a PVD-coated Tiger·tec Gold grade and a versatile P/M/S material range to improve tool life and process stability; order directly via Metav Werkzeuge or request tailored application advice from the technical team. ADMT180712R-D56 WSP45G milling indexable insert — Tiger·tec Gold, 15° relief (Walter Tools) An ADMT180712R-D56 WSP45G insert engineered for robust milling of steel, stainless steel and heat‑resistant alloys in demanding production environments Tiger·tec Gold PVD coating Suitable for P / M / S materials Parallelogram 85° geometry 15° relief, 1.2 mm corner radius Higher productivity across mixed materials The combination of the Tiger·tec Gold coating and the WSP45G grade yields a PVD-coated carbide solution tailored for milling tasks where both toughness and wear resistance matter. This grade is optimised for the characteristic heat and chip formation of steels, the toughness of stainless steels and the thermal demands of superalloys and titanium. The result is a more consistent removal rate and reduced interruptive tool changes — benefits that translate directly into improved throughput and lower unit machining costs. Consistent surface quality with stable cutting edges Designed to support a stable cutting edge, the insert geometry and chipcontrol features reduce build‑up and improve surface finish even under high thermal load. The D56 chipbreaker promotes reliable chip evacuation while the 15° relief prevents rubbing at the flank, maintaining dimensional fidelity over longer tool lives. These technical choices lead to fewer rework cycles and a predictable surface quality across batches. Geometry and dimensions that enhance process security The parallelogram 85° form gives defined approach angles and secure seat location in compatible toolholders, increasing clamping stability and reducing vibration. The 1.2 mm corner radius contributes to edge strength where interrupted cuts or heavy depths of cut are present, while the plate thickness code 07 supports the stiffness required for industrial milling applications. Tolerance class M ensures repeatable interchangeability in multi‑tool setups. Practical application notes and selection guidance As a versatile milling insert for general and demanding operations, this plate is suitable for roughing and semi‑finishing passes where a balance of wear resistance and toughness is required. The P / M / S designation means the insert is explicitly intended for steel, stainless steel and heat‑resistant superalloys/titanium, making it a good single‑grade choice for mixed‑material production runs. If uncertain about cutting parameters or holder compatibility, consult Metav Werkzeuge’s application engineers for parameter windows and toolholder recommendations to ensure optimal performance. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger·tec Gold inserts and to arrange reliable supply — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: ADMT180712R-D56-WSP45G-WALTER Designation: ADMT180712R-D56 WSP45G Type: milling indexable insert Manufacturer: Walter Tools Core dimensions Plate size: 18 Plate thickness: 07 Relief angle: 15° Corner radius: 1.2 mm Plate form angle: parallelogram 85° Materials & special features Series: Tiger·tec Gold Grade: WSP45G Grade class: PVD-coated carbide Material suitability: P / M / S Chipbreaker: D56 Tolerance class: M Version: T FAQ Which materials can this insert machine effectively? The ADMT180712R-D56 WSP45G insert is specified for P / M / S — suitable for steel, stainless steel and heat‑resistant superalloys/titanium, reflecting the versatile character of the Tiger·tec Gold grade. For which milling tasks is this grade best suited? WSP45G is a tough, versatile PVD grade intended primarily for milling operations that require a balance between wear resistance and edge stability, making it suitable for both roughing and semi‑finishing. What does the parallelogram 85° shape influence in practice? The parallelogram 85° geometry provides a defined cutting approach angle and secure seating in compatible toolholders, improving clamping stability and chip flow during interrupted or heavy cuts. How does the D56 chipbreaker contribute to machining? The D56 chipbreaker supports controlled chip formation and evacuation, which helps to maintain a stable cutting edge and consistent surface quality under varying cutting conditions. What does tolerance class M mean for tool fitting? Tolerance class M indicates a medium tolerance level, providing reliable interchangeability and repeatable positioning within multi‑tool assemblies and standard toolholders. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
ADMT180712R-F56 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WKK25G grade for highly productive cast‑iron machining; the 15° relief and F56 chipbreaker give consistent chip control and extended edge life. Order the insert directly via Metav Werkzeuge or contact the team for technical advice. ADMT180712R-F56 WKK25G milling indexable insert — Tiger‑tec Gold, for cast‑iron machining (Walter Tools) A ADMT180712R-F56 WKK25G milling indexable insert designed to deliver productive and wear‑resistant performance in cast‑iron milling applications. Tiger‑tec Gold coated grade WKK25G Optimised for cast‑iron machining (ISO K) 15° relief angle for reliable cutting Parallelogram 85° shape, 1.2 mm corner radius High productivity for abrasive cast‑iron tasks The combination of the Tiger‑tec Gold coating and the WKK25G carbide grade is engineered for the specific demands of cast‑iron machining. The coating reduces abrasive wear while the substrate provides toughness against frequent, short‑breaking chips typical of cast materials. This results in consistent machining performance and predictable regrinding intervals, making the insert a pragmatic choice where process stability and uptime are priorities. The design reduces interruptions caused by premature edge failure and supports stable machining parameters across batch runs. Stable cutting edge and reproducible tool life A relief angle of 15° paired with a 1.2 mm corner radius promotes a strong cutting edge that withstands thermal and mechanical loads during face and profile milling. The geometry balances edge strength and cutting action to lower the risk of chipping while preserving surface quality. The F56 chipbreaker is optimised for fragmenting chips on cast‑iron, aiding evacuation and reducing the potential for re‑cutting that can shorten tool life. Together, these features provide improved process security and reduced tool change frequency in production environments. Integration benefits and handling efficiency in the toolroom The parallelogram 85° insert form offers a robust seating in standard milling holders and enables flexible cutting strategies with favourable approach angles for shoulder or face operations. The insert thickness and size align with common cutter bodies to simplify stocking and replacement. With a straightforward indexable design, the unit supports rapid reorientation and minimal downtime. The result is a practical tool choice that contributes to higher machine utilisation and easier logistical planning on the shop floor. Contact Metav Werkzeuge to request availability of the ADMT180712R‑F56 WKK25G Tiger‑tec Gold insert, obtain cutting data recommendations or arrange purchase directly through Metav Werkzeuge Product details SKU: ADMT180712R-F56-WKK25G-WALTER Designation: ADMT180712R-F56 WKK25G Brand: Walter Tools Series: Tiger‑tec Gold Core data Relief angle: 15° Corner radius: 1.2 mm Insert size: 18 mm Thickness: 07 Tolerance class: M Features / Applications Coating: Tiger‑tec Gold Grade: WKK25G (coated cemented carbide) Chipbreaker: F56 Shape: Parallelogram 85° Material suitability: Cast‑iron (ISO K) Execution: T FAQ What materials is this insert suitable for? The ADMT180712R‑F56 WKK25G insert is formulated for cast‑iron (ISO K) applications and is optimised to handle the abrasive wear and short, breaking chips typical of such materials. How does the Tiger‑tec Gold coating improve performance? The Tiger‑tec Gold coating on the WKK25G grade increases abrasion resistance and helps maintain a stable cutting edge, which extends usable tool life in cast‑iron milling operations. Will the F56 chipbreaker work for both roughing and finishing? The F56 chipbreaker is primarily designed for effective chip control in cast‑iron; it provides reliable fragmentation for productive roughing and can deliver acceptable surface quality in many finishing passes depending on cutting parameters. Can this insert be used in standard parallelogram toolholders? Yes, the parallelogram 85° form of the insert is compatible with common toolholder designs that accept this geometry, enabling straightforward integration into existing milling assemblies. Is the 1.2 mm corner radius suitable for heavy interrupted cuts? The 1.2 mm corner radius provides a robust edge profile that improves resistance to chipping during interrupted cuts, contributing to process stability under demanding conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT180712R-F56 WKP25S Wendeplatten - Walter Tools
Take advantage of a high-performance combination: the Tiger·tec Silver coating and the WKP25S grade deliver consistent edge life and reliable chip control in mixed production of steel and cast iron. The robust parallelogram 85° geometry and F56 chipbreaker support stable milling and predictable surface finish—order directly via Metav Werkzeuge or consult our technicians for process integration. ADMT180712R-F56 WKP25S — indexable milling insert, Tiger·tec Silver (Walter Tools) The ADMT180712R-F56 WKP25S is an indexable milling insert designed for productive milling of steel and cast iron, combining a Tiger·tec Silver coating with a controlled chipbreaker geometry. Tiger·tec Silver coating technology Grade WKP25S for steel and cast iron Parallelogram 85° geometry for versatile milling Effective chip control with F56 chipbreaker Precision and performance where material mix matters The combination of Tiger·tec Silver coating and the WKP25S carbide grade is engineered to meet the thermal and abrasive demands of machining both steel and cast iron. The coating reduces friction and supports stable cutting temperatures, which results in extended tool life and fewer tool changes during production. Thanks to the insert’s geometry, the machining process benefits from consistent chip control, reducing downtime caused by clogged coolant nozzles or damaged workpiece surfaces. Geometry that improves stability and surface quality The parallelogram 85° configuration delivers a secure seating and positive cutting engagement that helps maintain a steady cutting force. The combination of the insert’s relief angle and the 1.2 mm corner radius improves edge robustness during interrupted cuts and contour milling. This results in better surface integrity and fewer marks on finished components, which is particularly valuable in serial production environments where reproducibility is essential. Chip control and process predictability The F56 chipbreaker is tuned to produce short, controllable chips when cutting typical steels and cast irons, lowering the risk of entanglement and enabling more consistent machine cycle times. Improved chip formation also reduces heat concentration at the cutting edge, supporting a more predictable rate of wear. For operations seeking to optimise throughput, this behaviour translates to reliable component quality and fewer unscheduled tool changes. Practical integration and application guidance The insert’s designation and dimensions support straightforward toolholder selection and inventory management in standard milling fixtures. With a tolerance class M and the widespread compatibility implied by the ADMT180712R-F56 geometry, the component integrates into established tooling systems without complex adapter requirements. For users evaluating process parameters, Metav Werkzeuge can advise on cutting data tailored to the particular steel or cast iron grade used in production. Contact Metav Werkzeuge to discuss how the Walter Tools Tiger·tec Silver ADMT180712R-F56 WKP25S insert can be integrated into existing milling processes and to receive application-specific cutting data and stock information Technical data Article number (SKU): ADMT180712R-F56-WKP25S-WALTER Name: Fräswendeschneidplatte ADMT180712R-F56 WKP25S Walter Tools Series: Tiger-tec Silver Grade: WKP25S Manufacturer: Walter Tools Core technical data Insert size: 18 Thickness code: 07 Corner radius: 1.2 mm Relief angle: 15° Plate form: Parallelogram 85° Chipbreaker: F56 Tolerance class: M Special features Coating technology: Tiger·tec Silver Applicable for: Steel (P) and Cast iron (K) Carbide/grade: WKP25S (coated carbide) Designation: ADMT180712R-F56 FAQ What materials is this insert suitable for? The ADMT180712R-F56 WKP25S insert is specified for machining steel (P) and cast iron (K), using the WKP25S grade and Tiger·tec Silver coating to handle typical heat and abrasive wear patterns. How does the F56 chipbreaker help production? The F56 chipbreaker on this insert improves chip control and produces short, manageable chips when milling steel and cast iron, which enhances machine uptime and surface consistency. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating reduces friction at the cutting zone, supports stable cutting temperatures and extends the service life of the cutting edge during continuous milling cycles. Is the geometry suitable for interrupted cuts? Yes — the parallelogram 85° geometry combined with a 1.2 mm corner radius increases edge strength and stability, making the insert resilient for interrupted cuts and pocketing operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT180712R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WKP35G grade and the F56 chipbreaker to extend tool life and secure consistent chip control for steel and cast iron machining; order the insert directly via Metav Werkzeuge or consult the specialists for application advice. ADMT180712R-F56 WKP35G indexable milling insert — for steel and cast iron | Walter Tools ADMT180712R-F56 WKP35G is an indexable milling insert designed for high-productivity operations in steel and cast iron, combining a wear-resistant Tiger‑tec Gold coating with a dedicated chipbreaker geometry. Tiger·tec Gold coating for long tool life WKP35G grade for steel and cast iron Parallelogram 85° form for secure clamping 1.2 mm nose radius for reliable finish Higher productivity through optimised grade and coating The combination of the WKP35G cutting grade and the Tiger‑tec Gold coating delivers a measurable improvement in wear resistance and thermal stability during heavy-duty milling. The coated carbide composition is specifically configured for machining steel and cast iron, so the insert maintains cutting-edge stability during extended cycles. With the integrated F56 chipbreaker, chip formation is controlled to reduce re-cutting and minimise surface rework, resulting in fewer tool changes and more efficient spindle utilisation. Geometry that secures accuracy and repeatable surface quality A parallelogram 85° insert form provides a robust seating and predictable cutting vector, which improves clamping stability and repeatable results across series production. The relief geometry of 15° combined with a 1.2 mm nose radius delivers a balance between edge strength and surface finish, enabling reliable component tolerances while limiting vibration. The insert thickness and form factor support consistent mounting in standard milling holders, so machining runs remain steady and setup times are reduced. Versatile application scope and cost-conscious machining Designed for catalogue- and geometry-dependent use, this insert covers a broad range of common steels and cast irons under ISO 513 classifications, offering process security across mixed production batches. The grade’s abrasion resistance and the chipbreaker’s capability to handle short, brittle chips make the insert suitable for interrupted cuts and variable feed conditions, improving overall tool life and lowering per-part tooling costs. For manufacturers seeking predictable output and lower scrap rates, the geometry and coating together provide a cost-effective machining solution. Contact Metav Werkzeuge for tailored application support and to source genuine Walter Tools inserts like the ADMT180712R-F56 WKP35G through the local sales team. Technical data Article number: ADMT180712R-F56-WKP35G-WALTER SKU: ADMT180712R-F56-WKP35G-WALTER Label: Fräswendeschneidplatte ADMT180712R-F56 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Facts Plate size: 18 mm Thickness: 7 mm Nose radius: 1.2 mm Relief angle: 15° Tolerance class: M Special features Chipbreaker: F56 Plate form: Parallelogram 85° Grade type: Coated carbide (Tiger‑tec Gold) Material suitability: steel (P), cast iron (K) Designation: ADMT180712R-F56 WKP35G FAQ What materials is this insert suited for? The ADMT180712R-F56 WKP35G insert is specified for steel (P) and cast iron (K) according to the grade capabilities of the WKP35G Tiger‑tec Gold series. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes controlled chip formation and evacuation, improving surface quality and reducing the risk of chip-related interruptions when machining steel and cast iron. Is the parallelogram 85° form important for clamping? Yes, the parallelogram 85° form increases seating stability and repeatability in the tool holder, which contributes to consistent cutting performance and reduced fixture-related variation. What does the 1.2 mm nose radius provide? A 1.2 mm nose radius balances edge strength and surface finish, enabling both stable cutting conditions and good component surface quality in typical milling operations. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT180712R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for reliable chip control and extended tool life; the combination of stable geometry and proven chipbreaker design supports efficient milling of steel and cast iron. Order or request application guidance via Metav Werkzeuge for a seamless supply and technical consultation. ADMT180712R-F56 WKP35S milling indexable insert — 15° clearance, 1.2 mm corner radius | Walter Tools The ADMT180712R-F56 WKP35S is a parallelogram 85° milling insert designed for high-performance finishing and roughing in steel and cast iron applications Tiger·tec Silver coating technology Optimised for steel and cast iron 15° clearance angle for stable cutting 1.2 mm corner radius for extended edge life Higher productivity through advanced coating and grade The combination of Tiger·tec Silver coating and the WKP35S cut-off grade provides a marked increase in process stability and tool life. The coated carbide substrate is engineered to withstand the thermal and mechanical loads typical of machining steel and cast iron, reducing wear rates and enabling longer cutting times between indexings. In practice, this results in fewer tool changes and improved uptime on milling operations, contributing directly to cost efficiency and predictable cycle times. Consistent chip control and geometry for dependable results A parallelogram 85° form paired with an F56 chipbreaker delivers controlled chip formation across a range of feed rates. The 15° clearance angle reduces rubbing and supports a clean cutting action, while the 1.2 mm corner radius enhances edge strength for interrupted cuts and strength-critical passes. These geometric choices translate into repeatable surface finishes and dimensional stability, helping maintain part tolerances even in mixed-production environments. Practical benefits for workshop and production settings The insert’s grade WKP35S has been tuned for balanced performance: economical yet robust enough for serial production. The designation P / K denotes suitability for steel (P) and cast iron (K), which simplifies tool selection where mixed materials are machined. The insert’s standard form factor and compatibility with common milling toolholders support quick replacement and minimal setup time, which favours medium- to high-volume machining and reduces operator intervention. Application guidance and efficiency considerations Selection of the correct feed and speed paired with the ADMT180712R-F56 geometry yields improved surface quality and predictable flank wear. The coated grade assists in chip flow and reduces built-up edge tendency, especially under varying cooling conditions. For customers assessing tool performance, the insert offers a pragmatic balance between wear resistance and toughness, making it a reliable choice for everyday production tasks where consistent output and minimal rework are priorities. For tailored cutting data or to secure supply of Walter Tools ADMT180712R-F56 WKP35S inserts, contact Metav Werkzeuge for expert application advice and fast provisioning. Technical data SKU: ADMT180712R-F56-WKP35S-WALTER Label: Fräswendeschneidplatte ADMT180712R-F56 WKP35S Walter Tools Product type: milling indexable insert Grade: WKP35S Series: Tiger-tec Silver Chipbreaker: F56 Base designation: ADMT180712R-F56 Execution: T Tolerance class: M Material code: P / K Insert form: Parallelogram 85° Size: 18 Thickness code: 07 Corner radius: 1,2 Clearance angle: 15° Manufacturer: Walter Tools Numbers / Core technical data Clearance angle: 15° Corner radius: 1,2 mm Insert size: 18 Thickness code: 07 Tolerance class: M Special features / Versions Tiger·tec Silver coating Grade WKP35S (coated carbide) F56 chipbreaker Parallelogram 85° insert form Suitable for steel (P) and cast iron (K) Series: Tiger-tec Silver Manufacturer: Walter Tools FAQ What materials is this insert suited for? The ADMT180712R-F56 WKP35S is specified for machining steel (P) and cast iron (K), with the WKP35S grade optimised for these material groups. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating reduces abrasive and adhesive wear, improving edge life and enabling more consistent performance when milling steels and cast irons with the ADMT180712R-F56. Which chipbreaker is fitted to this insert and why does it matter? This insert uses an F56 chipbreaker, designed to control chip form and evacuation, which contributes to stable cutting conditions and reliable surface quality. What geometric advantages does the parallelogram 85° shape provide? The parallelogram 85° form allows secure seating in milling cutters and supports positive cutting angles for a balance of strength and accessibility in shoulder and face milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, brand-new product from the manufacturer (Walter Tools).
ADMT180712R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the robust F56 chipbreaker to achieve reliable edge stability and consistent chip control; combine this with the parallelogram 85° geometry and 15° clearance for predictable surface finish and steady productivity. Order the insert directly via Metav Werkzeuge or contact the consultants for tailored machining advice. ADMT180712R-F56 WSP45G milling indexable insert by Walter Tools — Tiger·tec Gold, P/M/S application The ADMT180712R-F56 WSP45G is a parallelogram 85° milling insert with 15° clearance, designed for versatile milling of steel, stainless steel and heat‑resistant alloys Tiger·tec Gold PVD coating for long tool life Suitable for Steel, Stainless and Superalloys (P/M/S) Parallelogram 85° form with 15° clearance angle 1.2 mm corner radius with F56 chipbreaker Consistent productivity through advanced coating and substrate The combination of Tiger·tec Gold coating and a PVD‑coated carbide substrate provides a measurable advantage in tool life and wear resistance during continuous milling operations. This coating technology is engineered to reduce flank wear and maintain a stable cutting edge under thermal and mechanical load. For production environments seeking fewer tool changes and more predictable cycle times, the coated grade offers improved uptime and lower overall machining costs. The technical coating characteristics translate directly into operational benefits such as extended insert life and reduced scrap rates. Predictable chip behaviour and surface quality The integrated F56 chipbreaker and a 1.2 mm corner radius are configured to generate controlled chips and support stable cutting conditions, particularly in interrupted cuts and heavy axial engagement. The parallelogram 85° geometry, combined with a 15° clearance angle, helps to separate cutting forces and minimise rubbing, which supports a consistent surface finish. In practical terms, this means fewer secondary operations and more parts meeting finish tolerances out of the machine. Technical terms: a chipbreaker shapes and breaks the chip to aid evacuation, while the corner radius trades off between edge strength and achievable surface roughness. Broad material range and flexible application Engineered for P/M/S applications, the insert suits unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. This versatility makes it appropriate for job shops and production lines that process mixed batches without the need for multiple specialised grades. The tolerance class M and a plate thickness code 07 indicate compatibility with typical milling toolholders and stable clamping systems; size 18 denotes the insert dimension for selecting the correct cutter body. The result is a single insert choice that reduces tooling complexity while maintaining process security across many component families. Integration into production and expert support Adopting this grade within an existing tool inventory is straightforward: the insert fits standard parallelogram seating cutter bodies and benefits from Walter Tools’ known focus on edge stability. For detailed parameter settings or to confirm compatibility with a specific machine setup, Metav Werkzeuge provides application support and further technical data. If a precise feed, speed or depth recommendation is required for a particular alloy or machining strategy, the team can supply machining windows and optimisation tips by e‑mail or phone. Choose Walter Tools’ Tiger·tec Gold insert for robust, multi‑material milling and contact Metav Werkzeuge for availability and tailored application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT180712R-F56-WSP45G-WALTER SKU: ADMT180712R-F56-WSP45G-WALTER Designation: ADMT180712R-F56 ISO designation: ADMT180712R-F56 WSP45G Core specifications Series: Tiger·tec Gold Grade / Sort: WSP45G Material code: P / M / S Form: Parallelogram 85° Clearance angle: 15° Corner radius: 1.2 mm Chipbreaker: F56 Plate size: 18 Plate thickness: 07 Tolerance class: M Execution: T Materials & features Coating: Tiger·tec Gold (PVD coated carbide) Application: Milling of steel, stainless steel and heat‑resistant alloys Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The ADMT180712R-F56 WSP45G insert is designed for machining steel, stainless steel and heat‑resistant superalloys/titanium (P/M/S), offering a balanced performance across these groups. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating improves wear resistance and maintains edge stability under thermal load, extending insert life and supporting consistent production results. What benefit does the F56 chipbreaker provide? The F56 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of chip entanglement and contributing to a reliable surface finish. Is the geometry suitable for heavy‑duty milling? The parallelogram 85° form and 15° clearance angle support robust engagement and help separate cutting forces, making the insert suitable for a range of moderate to heavy milling applications. What does the tolerance class M indicate? Tolerance class M denotes medium dimensional tolerances, ensuring compatibility with standard milling cutter bodies and reliable seating for repeatable machining. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
ADMX 070202 Indexable Insert for Aluminium - MetavCUT
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detail specifications indexable inserts ADMX 070202 from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070202-Aluminium Dataand Figures: ISO-Code: ADMX070202 Clearance Angle: 15° Angle: 85° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Usage for: Aluminium special Hole Style: special Form: parallelogram Chip Breaker: special Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070202-Aluminium-MetavCUT 40END
ADMX 070202 Indexable Insert for Cast Iron - MetavCUT
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Technical data ADMX 070202 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070202-CastIron Figures for the tool: ISO-Code: ADMX070202 Clearance Angle: 15° Angle: 85° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide Usage for: Cast steel special Hole Style: special Form: parallelogram Chip Breaker: special Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070202-Cast Iron-MetavCUT 40END
ADMX 070202 Indexable Insert for Stahl - MetavCUT
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Specifications for ADMX 070202 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070202-Steel Facts / Figures: ISO-Code: ADMX070202 Clearance Angle: 15° Angle: 85° Thickness: 2,38mm Radius: 0.2 Special features Material: cemented carbide special Hole Style: special Form: parallelogram Chip Breaker: special Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070202-Stahl-MetavCUT 40END
ADMX 070202 Indexable Insert for Stainless Steel - MetavCUT
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Product features insert ADMX 070202 from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070202-Stainless ISO-Code: ADMX070202 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 15° special Hole Style: special Thickness: 2,38mm Radius: 0.2 Chip Breaker: special Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070202-Stainless Steel-MetavCUT 40END
ADMX 070204 Indexable Insert for Aluminium - MetavCUT
Couldn't find the right insert? Don't worry, we're here for you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Technical data ADMX 070204 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070204-Aluminium Facts for the tool: ISO-Code: ADMX070204 Clearance Angle: 15° Angle: 85° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Usage for: Aluminium special Hole Style: special Form: parallelogram Chip Breaker: special Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070204-Aluminium-MetavCUT 40END
ADMX 070204 Indexable Insert for Cast Iron - MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Design details for ADMX 070204 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070204-CastIron Data/ Figures: ISO-Code: ADMX070204 Clearance Angle: 15° Angle: 85° Thickness: 2,38mm Radius: 0.4 Special features Material: cemented carbide Usage for: Cast steel special Hole Style: special Form: parallelogram Chip Breaker: special Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070204-Cast Iron-MetavCUT 40END
ADMX 070204 Indexable Insert for Stahl - MetavCUT
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by e-mail.► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Features for insert ADMX 070204 from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070204-Steel Facts for the tool: ISO-Code: ADMX070204 Clearance Angle: 15° Angle: 85° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Usage for: Steel special Hole Style: special Form: parallelogram Chip Breaker: special Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070204-Stahl-MetavCUT 40END
ADMX 070204 Indexable Insert for Stainless Steel - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Technical data for ADMX 070204 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070204-Stainless Figures for the tool: ISO-Code: ADMX070204 Clearance Angle: 15° Angle: 85° Thickness: 2,38mm Radius: 0.4 Features Material: cemented carbide Usage for: Stainless steel special Hole Style: special Form: parallelogram Chip Breaker: special Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070204-Stainless Steel-MetavCUT 40END
ADMX 070208 Indexable Insert for Aluminium - MetavCUT
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Features for indexable inserts ADMX 070208 from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070208-Aluminium Facts for the tool: ISO-Code: ADMX070208 Clearance Angle: 15° Angle: 85° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Usage for: Aluminium special Hole Style: special Form: parallelogram Chip Breaker: special Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070208-Aluminium-MetavCUT 40END
ADMX 070208 Indexable Insert for Cast Iron - MetavCUT
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Design details for indexable inserts ADMX 070208 from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070208-CastIron Facts for the tool: ISO-Code: ADMX070208 Clearance Angle: 15° Angle: 85° Thickness: 2,38mm Radius: 0.8 Features Material: cemented carbide Usage for: Cast steel special Hole Style: special Form: parallelogram Chip Breaker: special Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070208-Cast Iron-MetavCUT 40END
ADMX 070208 Indexable Insert for Stahl - MetavCUT
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Technical data for indexable inserts ADMX 070208 from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070208-Steel ISO-Code: ADMX070208 Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 15° special Hole Style: special Thickness: 2,38mm Radius: 0.8 Chip Breaker: special Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070208-Stahl-MetavCUT 40END
ADMX 070208 Indexable Insert for Stainless Steel - MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Features indexable inserts ADMX 070208 from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070208-Stainless Facts / Figures: ISO-Code: ADMX070208 Clearance Angle: 15° Angle: 85° Thickness: 2,38mm Radius: 0.8 Special features Material: cemented carbide Usage for: Stainless steel special Hole Style: special Form: parallelogram Chip Breaker: special Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070208-Stainless Steel-MetavCUT 40END
ADMX 070216 Indexable Insert for Aluminium - MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details for ADMX 070216 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070216-Aluminium ISO-Code: ADMX070216 Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 15° special Hole Style: special Thickness: 2,38mm Radius: 1.6 Chip Breaker: special Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070216-Aluminium-MetavCUT 40END
ADMX 070216 Indexable Insert for Cast Iron - MetavCUT
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for ADMX 070216 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: ADMX070216-CastIron Figures for the tool: ISO-Code: ADMX070216 Clearance Angle: 15° Angle: 85° Thickness: 2,38mm Radius: 1.6 Special features Material: cemented carbide Usage for: Cast steel special Hole Style: special Form: parallelogram Chip Breaker: special Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-ADMX-070216-Cast Iron-MetavCUT 40END
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com