Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
ADMT160608R-G56 WSM35G WSM35G Wendeplatten - Walter Tools
Combine high edge stability and broad material capability through the Tiger·tec Gold coating and WSM35G grade for reliable, productive machining; order the insert directly via Metav Werkzeuge or contact our consultants for application support. ADMT160608R-G56 WSM35G milling insert, Tiger·tec Gold – Walter Tools The ADMT160608R-G56 WSM35G is a parallelogram 85° milling insert engineered for heavy-duty machining of rostfreier Stahl and heat-resistant superalloys. Tiger·tec Gold coating for extended tool life Optimised for rostfreier Stahl and superalloys Parallelogram 85° form for secure clamping Corner radius 0.8 mm for consistent surface finish Increased productivity with a wear-resistant grade The combination of the Tiger·tec Gold coating and the WSM35G grade offers measurable gains in process reliability when tackling difficult-to-machine materials. The coated carbide formulation is developed to resist the high temperatures and adhesion tendencies typical of rostfreier Stahl and heat-resistant alloys, which leads to more consistent cutting edges and longer intervals between tool changes. In practical terms, this means fewer process interruptions and improved overall equipment effectiveness in series production. Geometry that improves seating and surface quality The insert’s Parallelogram 85° shape and 15° relief angle ensure secure seating in compatible cutters and promote predictable chip flow. The defined corner radius 0.8 mm supports a balance between strength and surface finish, making the insert suitable for both roughing where edge robustness is critical and semi-finishing where dimensional control matters. Clear geometric features reduce the risk of vibration and contribute to repeatable component tolerances on each machining pass. Chip control and thermal management for demanding alloys Equipped with the G56 chipbreaker, the insert assists in generating controllable, short chips even under the poor thermal conductivity of superalloys and rostfreier Stahl. The chipformer geometry, paired with the coating’s thermal resilience, lowers tendencies for built-up edge and helps maintain a stable cutting zone. For shops running mixed batches of stainless and high-temperature alloys, this translates into fewer scrap parts and more predictable cycle times. Economic benefits through longer edge life and fewer tool changes By extending edge life and stabilising chip formation, this cutting grade reduces unplanned downtime and cutting tool consumption. The insert’s tolerance class M supports consistent interchangeability in automated tool change systems, simplifying inventory management. For production environments where repeat accuracy and throughput are key metrics, the result is a demonstrable improvement in cost per component and cumulative machine utilisation. For specific machining recommendations with Walter Tools Tiger·tec Gold inserts, or to reserve ADMT160608R-G56 WSM35G stock, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid procurement. Technical data SKU: ADMT160608R-G56-WSM35G-WALTER Article: ADMT160608R-G56 WSM35G Product type: milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Insert size: 16 mm Thickness: 06 Corner radius: 0.8 mm Relief angle: 15° Plate form: Parallelogram 85° Chipbreaker: G56 Tolerance class: M Materials & special features Coating: Tiger·tec Gold Grade: WSM35G (coated carbide) Suitable for: rostfreier Stahl (M) and heat-resistant superalloys / titanium (S) Application: heavy-duty and stainless machining Benefit: optimised chip formation and stable cutting edge FAQ Is this insert suitable for machining rostfreier Stahl? Yes. The ADMT160608R-G56 WSM35G insert is specified for rostfreier Stahl and provides improved edge life and chip control on such materials. What is the shape and relief angle of the insert? The insert uses a parallelogram 85° form with a 15° relief angle to ensure secure seating and stable cutting behaviour. Which chipbreaker is fitted and what is its benefit? The G56 chipbreaker is used on this grade to produce controlled, short chips, improving process security when machining difficult alloys. How does the Tiger·tec Gold coating affect performance? Tiger·tec Gold coating increases thermal and wear resistance of the coated carbide, leading to longer edge life and consistent results in demanding applications. Can this insert be used for both roughing and finishing operations? Yes. With a corner radius of 0.8 mm and robust grade characteristics, the insert is suitable for heavy cuts as well as semi-finish passes where a good surface is required. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. The offered item is an original, factory-new product of the manufacturer.
ADMT160608R-G56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of reliable edge life, versatile material coverage and secure clamping for uninterrupted milling processes. The coated grade and stable geometry support consistent surface quality and long tool life; order genuine inserts via Metav Werkzeuge or consult the team for application advice. ADMT160608R-G56 WSP45G – indexable milling insert, Tiger‑tec Gold, Walter Tools, Parallelogram 85°, 15° free angle The ADMT160608R-G56 WSP45G is a coated carbide indexable milling insert engineered for versatile face and slot milling where a balance of edge stability and heat resistance is required. Tiger‑tec Gold PVD coating Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 85° for secure clamping 0.8 mm corner radius for robust cutting edge Engineered for consistent milling performance The combination of Tiger‑tec Gold coating and the WSP45G grade provides a PVD‑coated carbide chemistry aimed at extended edge life and reliable chip control. Designed as a versatile P/M/S solution, the insert resists the thermal and mechanical loads typical of milling operations; the 15° free angle reduces rubbing on the relief face, while the 0.8 mm corner radius supports a stable cutting edge for repeatable surface finish. This engineering focus directly benefits cycle stability and reduces downtimes associated with premature edge failure. Greater process reliability through secure geometry and tolerance The parallelogram 85° form offers a compact clamping footprint and a positive shear geometry that enhances cutting stability in interrupted cuts. With tolerance class M and execution code T, the insert maintains consistent seat fit and repeatability across tool holders, which contributes to predictable tool life and consistent part quality. The controlled geometry supports efficient chip formation with the supplied G56 chipbreaker, promoting reliable swarf evacuation and fewer rework cycles. Material guidance and application advantages Classified for ISO material groups P / M / S, the insert suits unalloyed and alloyed Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium. For these demanding materials, the coated grade emphasises wear resistance and thermal stability to counteract built‑up edge and edge breakdown. As an indexable plate for common milling systems, the product is a practical choice where flexible material coverage and steady performance are priorities. For further machining recommendations or to verify compatibility with a specific workpiece, Metav Werkzeuge provides technical support and material pairing advice. Contact Metav Werkzeuge for specification advice and original Walter Tools Tiger‑tec Gold inserts using SKU ADMT160608R-G56-WSP45G-WALTER Technical data Article number: ADMT160608R-G56-WSP45G-WALTER Designation: ADMT160608R-G56 Brand: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Execution: T Tolerance class: M Facts Corner radius: 0.8 mm Free angle: 15° Insert size: 16 mm Thickness code: 06 Shape: Parallelogram 85° Special features Coating: Tiger‑tec Gold PVD Chipbreaker: G56 Material compatibility: P / M / S (Stahl, rostfreier Stahl, superalloys) Abrasion and heat resistant grade for milling applications FAQ What materials is the ADMT160608R-G56 WSP45G suitable for? The ADMT160608R-G56 WSP45G is specified for ISO groups P / M / S, covering Stahl, rostfreier Stahl and heat‑resistant superalloys, which makes it suitable for a wide range of milling tasks. How does the Tiger‑tec Gold coating benefit milling operations? Tiger‑tec Gold PVD coating on the insert improves thermal resistance and wear performance, enabling the insert to maintain a stable cutting edge and consistent surface finish during prolonged milling cycles. What advantage does the parallelogram 85° shape provide? The parallelogram 85° geometry increases clamping security and provides a positive cutting orientation, which enhances stability in interrupted milling and reduces vibration. Can the insert be indexed for multiple cutting edges? Yes, the insert is designed as an indexable milling plate allowing rotation to a fresh edge; the robust geometry and tolerance class M support reliable repositioning and repeatable seating. Which chipbreaker is fitted and why does it matter? This grade uses the G56 chipbreaker, optimised for controlled chip formation in mixed materials, improving evacuation and reducing the risk of recut chips. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are used here for descriptive purposes only and do not imply any affiliation or endorsement by the trademark holders. The offered item is original, brand‑new manufacturer goods of the named brand (Walter Tools).
ADMT160612R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of robust Tiger·tec Gold coating, the WKP35G grade and a parallelogram geometry for reliable, productive milling of steel and cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. ADMT160612R-F56 WKP35G milling indexable insert — for steel and cast iron, Tiger·tec Gold | Walter Tools ADMT160612R-F56 WKP35G is a parallelogram 85° milling insert engineered for productive roughing and semi-finishing operations in steel and cast iron. Tiger·tec Gold coating for enhanced tool life Optimised for steel and cast iron machining Parallelogram 85° geometry for versatile milling 15° clearance with 1.2 mm corner radius Consistent productivity from advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G carbide grade delivers predictable wear behaviour and extended service life under demanding conditions. The coating technology reduces abrasive wear and improves thermal resistance, which means fewer tool changes and a steadier process. For production environments where uptime and repeatability matter, this insert contributes to a more efficient machining cycle by maintaining a stable cutting edge and reducing unexpected downtime. Geometry that simplifies setup and widens application scope The parallelogram 85° form with a 15° clearance and 1.2 mm corner radius supports robust engagement and flexible toolpath strategies. The 85° lead angle is well suited to slotting, face milling and shoulder operations where directional forces and chip flow are critical. A modest corner radius balances edge strength with surface finish capability, enabling effective material removal while still achieving acceptable surface quality in many common operations. Clear material suitability and practical implications Marked for the P / K designation, the insert is tailored for steel (P) and cast iron (K) in accordance with ISO grouping logic. This means the grade and chipformer are optimised to handle the heat generation and chip formation typical for steels, as well as the abrasive and often brittle chips from cast iron. Where operators are working across mixed batches of unalloyed, alloyed steel and grey or nodular cast iron, the insert provides a reliable, single-solution approach that reduces tool complexity in the tool crib. Process benefits and shop-floor considerations The integrated F56 chipbreaker promotes controllable chip shaping, helping to avoid long, entangling swarf and improving evacuation in confined toolpaths. Tolerance class M and the standardised insert dimensions simplify toolholder selection and repeatable clamping, which supports consistent part-to-part accuracy. For production managers, these technical aspects translate into measurable benefits: fewer interruptions for regrinds, predictable cycle times and improved throughput reliability. Contact Metav Werkzeuge for tailored cutting data and availability of the Tiger·tec Gold WKP35G ADMT160612R-F56 insert — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: ADMT160612R-F56-WKP35G-WALTER Product: Milling indexable insert Designation: ADMT160612R-F56 WKP35G Brand: Walter Tools Facts Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F56 Shape: Parallelogram 85° Clearance angle: 15° Corner radius: 1.2 mm Size: 16 Thickness: 06 Tolerance class: M Execution: T Special features Coating: Tiger·tec Gold Material designation: P / K (steel / cast iron) Main applications: Steel machining, Cast iron machining FAQ What materials is this insert intended for? The insert is intended for steel and cast iron machining, reflecting the P / K designation and the application focus of the WKP35G grade. What coating and grade improve wear resistance? The Tiger·tec Gold coating combined with the WKP35G grade provides enhanced abrasive and thermal resistance for extended tool life. Which geometries and chip control features support productive milling? The parallelogram 85° geometry together with the F56 chipbreaker and a 1.2 mm corner radius balance chip control and edge strength for a range of milling operations. Is the insert suitable for stainless steel? Stainless steel suitability is not specified for this grade; the insert is optimised for steel and cast iron as indicated. How does the clearance angle affect cutting performance? The 15° clearance angle helps to reduce rubbing and improves cutting stability, which supports consistent surface quality and reduced cutting forces. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and brand names are the property of their respective owners. Walter Tools is mentioned for explanatory purposes only; there is no affiliation implied. The offered article is an original, brand-new product from the manufacturer.
ADMT160612R-F56 WKP35S W KP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a WKP35S carbide grade and geometry tuned for stable chip control to boost productivity and tool life; order the ADMT160612R-F56 WKP35S directly via Metav Werkzeuge or ask our consultants if needed. ADMT160612R-F56 WKP35S — milling indexable insert by Walter Tools, for steel and cast iron, 15° relief ADMT160612R-F56 WKP35S is a milling indexable insert designed for productive machining of steel and cast iron components in industrial milling applications Tiger·tec Silver coating for wear resistance WKP35S grade for steel and cast iron 15° relief angle for secure cutting Parallelogram 85° shape with R1.2 corner radius Longer tool life through advanced coating and grade The insert is manufactured in the WKP35S carbide grade and finished with the Tiger·tec Silver coating, a combination that significantly improves wear resistance and extends edge life under typical industrial cutting conditions. Coated carbide reduces flank wear and microchipping compared with uncoated grades; this yields fewer tool changes and lower overall machining cost per component, making the solution economically attractive for medium- to high-volume production. Stable geometry for reliable chip control and surface finish A parallelogram 85° plate form with a 15° relief angle and a corner radius R1.2 mm gives the insert strong edge support and effective chip separation when used with the F56 chipbreaker. The geometry reduces cutting forces and vibration, which improves dimensional stability and surface finish on the workpiece. Tolerance class M ensures consistent seating and repeatable results across index changes, supporting tight process control on milling machines. Designed specifically for ISO P and K materials This grade and coating are optimised for the ISO groups P (steel) and K (cast iron). The substrate and coating combination handles the heat and continuous chip formation typical of steel cutting, while also tolerating the abrasive characteristics and short, breaking chips of cast iron. By matching the insert to the material group, users can expect improved tool life and steady machining performance across a broad range of alloyed and unalloyed steels as well as grey and nodular cast iron. Seamless integration into productive machining processes Available as an indexable insert with the designation ADMT160612R-F56 WKP35S, this component fits common milling tool holders designed for parallelogram inserts and supports quick index changes to reduce downtime. The overall design promotes predictable performance during high-duty cycles and is suitable for shops seeking to increase throughput without sacrificing surface quality. For production advice or to confirm holder compatibility, Metav Werkzeuge offers application support and technical guidance. Discuss application requirements with Metav Werkzeuge to specify the Walter Tools ADMT160612R-F56 WKP35S for process optimisation and reliable production results Technical Data Article number: ADMT160612R-F56-WKP35S-WALTER Designation: ADMT160612R-F56 WKP35S Product type: Fräswendeschneidplatte Brand: Walter Tools Series: Tiger·tec Silver Core data Relief angle: 15° Corner radius: R1.2 mm Plate size: 16 Thickness code: 06 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S Chipbreaker: F56 Shape: Parallelogramm 85° Material groups: P / K Execution: T FAQ What materials is the ADMT160612R-F56 WKP35S suitable for? The ADMT160612R-F56 WKP35S is specified for ISO P (steel) and ISO K (cast iron) applications; the WKP35S grade and Tiger·tec Silver coating handle heat and abrasive wear typical of these material groups. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on this milling insert reduces flank wear and improves abrasion resistance, which extends tool life and maintains cutting performance during prolonged production runs. Which geometry features improve chip control? The parallelogram 85° shape combined with the F56 chipbreaker and the 15° relief angle promotes controlled chip formation and lower cutting forces, resulting in better surface finish and stable tool behaviour. Is the ADMT160612R-F56 compatible with standard tool holders? The ADMT160612R-F56 WKP35S is produced to fit holders designed for parallelogram inserts of this size; tolerance class M supports reliable seating and repeatability during index changes. What advantages does WKP35S offer over uncoated grades? The WKP35S coated carbide offers enhanced wear resistance and consistent edge strength in both steel and cast iron machining, which typically results in fewer tool changes and improved process economy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and brand names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation; there is no affiliation between our company and the named manufacturers. The offered article is an original, brand-new product from the manufacturer.
ADMT160612R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold performance, a robust F56 chipbreaker and a precise 85° parallelogram form for secure machining of stainless steels and heat-resistant alloys; order the ADMT160612R-F56 WSM35G indexable insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations ADMT160612R-F56 WSM35G Fräswendeschneidplatte – Tiger·tec Gold, F56 chipbreaker (Walter Tools) The ADMT160612R-F56 WSM35G is a parallelogram indexable milling insert designed for high-demand machining of stainless steels and heat-resistant superalloys, offering stable chip control and extended tool life Tiger·tec Gold coating for extended tool life WSM35G grade optimised for stainless steels F56 chipbreaker for reliable chip control Parallelogram 85° form with 15° clearance Consistent performance on hard-to-machine alloys The combination of the WSM35G grade and Tiger·tec Gold coating delivers a balanced mix of wear resistance and thermal stability, specifically developed for demanding materials. This makes the insert a rational choice where process reliability is paramount: the coating reduces flank wear and helps maintain a stable cutting edge under thermal stress, while the grade chemistry supports controlled built-up edge behaviour. For shops focused on reproducible cycle times and fewer tool changes, this translates into measurable productivity gains and lower process variability. Geometry tailored for predictable chip formation The F56 chipbreaker and the parallelogram 85° form were selected to produce short, controllable chips when machining stainless steels and related alloys. The insert’s 15° clearance and 1.2 mm corner radius ensure a robust edge that tolerates interrupted cuts and moderate engagement depths. These geometrical attributes simplify fixture planning and reduce rework caused by unpredictable chip behaviour, delivering a cleaner surface finish and fewer interruptions in automated production environments. Operational benefits that support throughput and quality With a tolerance class M and a compact size designation, this insert is intended for assemblies that demand repeatable positioning and stable cutting forces. Reduced tool changes and consistent edge life contribute to lower overall machining costs and improved adherence to production schedules. The design also supports flexible toolholder choices common in modern CNC milling setups, so integration into existing tool systems is straightforward for production engineers seeking immediate process improvements. Discuss machining strategies for Walter Tools Tiger·tec Gold inserts with Metav Werkzeuge – contact info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and selection support Technical Data Article number: ADMT160612R-F56-WSM35G-WALTER Designation: ADMT160612R-F56 WSM35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSM35G Tolerance class: M Facts Clearance angle: 15° Corner radius: 1.2 mm Plate size: 16 Plate thickness designation: 06 Form angle: Parallelogram 85° Chipbreaker: F56 Special features Coating technology: Tiger·tec Gold Applicable materials: M (stainless steels), S (superalloys / titanium) Design: Parallelogram indexable insert Main application: Milling of difficult-to-cut alloys FAQ What materials is this insert best suited for? The ADMT160612R-F56 WSM35G insert is formulated for stainless steels (ISO group M) and heat-resistant superalloys or titanium (ISO group S), providing thermal stability and controlled chip formation. How does the F56 chipbreaker affect machining performance? The F56 chipbreaker produces short, consistent chips during milling, improving material evacuation and reducing the risk of entanglement or surface damage when using the ADMT160612R-F56 WSM35G insert. Can the insert withstand interrupted cuts and moderate radial engagement? Yes; the 1.2 mm corner radius and 15° clearance combine to protect the cutting edge against impact and thermal loading, supporting interrupted cuts in demanding production scenarios. Is this insert compatible with standard toolholders for parallelogram inserts? The parallelogram 85° form and standard groove geometry are compatible with common indexable milling holders designed for this shape; ensure toolholder seat and clamping match the insert designation. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
ADMT160612R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the WSM45X coated-carbide grade combined with the F56 chipbreaker and a 15° relief angle to improve chip control and edge stability in demanding stainless-steel and superalloy milling. Order the insert directly via Metav Werkzeuge or request application advice from the consultants. ADMT160612R-F56 WSM45X milling insert, Parallelogram 85°, 15° relief – Walter Tools The ADMT160612R-F56 WSM45X is a coated carbide milling insert designed for secure and productive machining of stainless steels and heat‑resistant superalloys in demanding industrial applications F56 chipbreaker for controlled chips 15° relief angle for versatile engagement 1.2 mm corner radius for edge strength Coated carbide grade WSM45X for tough materials Consistent performance in difficult-to-machine materials The combination of the WSM45X grade and a coated carbide substrate provides reliable performance when machining materials that are prone to work hardening and high heat generation. Classified for ISO groups M (rostfreie Stähle) and S (heat‑resistant superalloys and titanium), the material specification supports stable chip formation and a durable cutting edge. This results in fewer interruptions for tool correction, improved process stability and more predictable component quality when processing stainless steels and similar alloys. Geometry engineered for secure cutting and chip control The parallelogram 85° form together with the 15° relief ensures a secure engagement angle that supports both climb and conventional milling strategies where applicable. The F56 chipbreaker is tuned for reliable chip segmentation and evacuation in sticky or gummy materials, reducing the risk of built‑up edge and surface damage. A 1.2 mm corner radius increases edge robustness, allowing higher feed rates in many applications while maintaining surface integrity and tool life. Process advantages and application suitability Designed as part of the Walter Schneidstoffsorte series, this insert emphasises process security and long tool life in serial and batch production. The combination of geometry and material leads to predictable wear behaviour and consistent surface finish, which supports higher machine utilisation and reduced rework. The insert is suitable for demanding milling tasks in mechanical engineering and aerospace component production where stainless steels and superalloys are common. Contact Metav Werkzeuge for application advice and availability of the Walter Tools ADMT160612R-F56 WSM45X milling insert – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: ADMT160612R-F56-WSM45X-WALTER Product name: ADMT160612R-F56 WSM45X Manufacturer: Walter Tools Data Insert size: 16 Thickness designation: 06 Corner radius: 1.2 mm Relief angle: 15° Plate form: Parallelogramm 85° Chipbreaker: F56 Tolerance class: M Special features Grade series: Walter Schneidstoffsorte - Serie offen Sort: WSM45X (coated carbide) Suitable for: Stainless steels (M) Suitable for: Superalloys / Titanium (S) Execution: T Material indication: S / M FAQ What materials is this insert designed for? The ADMT160612R-F56 WSM45X is specified for stainless steels (M) and heat‑resistant superalloys/titanium (S) according to the grade characteristics of WSM45X. How does the F56 chipbreaker affect machining? The F56 chipbreaker on the ADMT160612R-F56 WSM45X promotes controlled chip segmentation and evacuation, which helps to avoid built‑up edge and maintain surface quality in adhesive materials. What does the 1.2 mm corner radius mean for tool life? A 1.2 mm corner radius increases edge strength on the ADMT160612R-F56 WSM45X, improving resistance to chipping and enabling higher feed rates while preserving tool life. Is the insert suitable for interrupted cuts? Yes; the combination of the parallelogram 85° geometry and the robust WSM45X grade makes the insert suited to applications with intermittent engagements and varying cutting conditions. Which toolholders are compatible with this insert form? The ADMT160612R-F56 WSM45X uses a parallelogram 85° form and is compatible with milling cutter bodies designed for ADMT‑style inserts of matching size and clamping specification. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are cited for explanation only and do not indicate any affiliation with our company. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
ADMT160612R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of high productivity, broad material capability and stable edge life offered by the ADMT160612R-F56 WSP45G insert; its Tiger·tec Gold technology and robust geometry ensure reliable milling results in varied production environments. Order the ADMT160612R-F56 WSP45G directly via Metav Werkzeuge or consult the Metav Werkzeuge team for application advice. ADMT160612R-F56 ADMT160612R-F56 WSP45G WSP45G - Milling Insert, Tiger·tec Gold, 15° free rake - Walter Tools The ADMT160612R-F56 WSP45G is a coated carbide milling insert designed for versatile milling of steel, stainless steel and heat-resistant alloys in general-purpose and demanding finishing operations. Tiger·tec Gold PVD coating Suitable for steel, stainless, superalloys 15° free rake, 1.2 mm corner radius Parallelogram 85° form, size 16 Consistent performance across challenging materials The combination of the WSP45G grade and the Tiger·tec Gold PVD coating provides a balance of toughness and wear resistance that benefits throughput and tool life when machining steel, stainless steel and superalloys. This grade has been engineered to support secure chip formation under the high thermal loads typical for these materials, which translates into fewer tool changes and more stable cycle times in serial production. The result is a measurable gain in process reliability for both roughing and finishing passes when using the appropriate cutting data. Geometry engineered for stability and repeatable accuracy With a 15° free rake and a 1.2 mm corner radius in a parallelogram 85° form, the insert offers a secure clamping position and predictable cutting behaviour. The geometry reduces radial forces and supports a durable cutting edge, meaning less vibration and improved surface quality on finished components. For customers seeking consistent dimensional tolerance and surface integrity, the insert’s form and radius contribute directly to repeatable machining results. Coating and grade delivering extended tool life The Tiger·tec Gold surface treatment on the coated carbide substrate improves heat resistance and protects the cutting edge against abrasive wear and built-up edge formation. This coating, combined with the WSP45G substrate characteristics, supports longer tool life in mixed-material shops and under elevated cutting temperatures. The economic benefit is reflected in fewer indexings and lower tooling consumption per part, making it suitable for both jobbing environments and larger batch runs. Practical application and process benefits The insert’s chipbreaker F56 and the proven grade selection simplify process planning for a wide range of milling tasks. Where effective chip control and edge stability are essential, this insert reduces downtime from poor chip evacuation and minimises rework. Integration into existing toolholders that accept the ADMT form is straightforward, enabling quick toolset-up and short changeovers. For further machining data or cutting-parameter suggestions, Metav Werkzeuge provides tailored recommendations to align the insert’s strengths with specific machine capabilities and workpiece materials. For application support or to request delivery of Walter Tools Tiger·tec Gold inserts such as the ADMT160612R-F56 WSP45G, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge is available to advise on optimal cutting data and supply options. Technical data SKU: ADMT160612R-F56-WSP45G-WALTER Name: Fräswendeschneidplatte ADMT160612R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Free rake: 15° Corner radius: 1.2 mm Size: 16 Thickness: 06 Tolerance class: M Plate form angle: 85° Special features Coating: Tiger·tec Gold (PVD) Grade: WSP45G Chipbreaker: F56 Shape: Parallelogram 85° Material suitability: steel, stainless steel, superalloys Execution: T FAQ Is this insert suitable for stainless steel milling? Yes. The ADMT160612R-F56 WSP45G grade and Tiger·tec Gold coating are designed for stainless steel machining and help control built-up edge and heat during cutting. Which materials can be milled with this insert? The insert is specified for ISO groups P, M and S, meaning it is suitable for machining steel, stainless steel and heat-resistant superalloys. What is the corner radius and how does it affect surface finish? The corner radius is 1.2 mm; this radius provides increased edge strength and contributes to a smoother surface in finishing operations when paired with appropriate cutting parameters. How does the chipbreaker F56 influence the cutting process? The F56 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of entanglement and improving stability in intermittent milling passes. Can this insert be used for both roughing and finishing? Yes. The combination of WSP45G grade and the coated surface balances toughness and wear resistance, making the insert appropriate for a range of operations from medium roughing to finishing. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the trademark holders beyond the sale of original, factory-new products. The offered item is an original, brand-new article from the manufacturer.
ADMT160616L-F56 WKP35G WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the WKP35G grade tuned for steel and cast iron, and the stable F56 chipbreaker for reliable, productive milling; order directly via Metav Werkzeuge or consult our technical team for application support. ADMT160616L-F56 WKP35G Milling Insert, Tiger·tec Gold – for Steel and Cast Iron (Walter Tools) The ADMT160616L-F56 WKP35G is a Tiger·tec Gold milling insert engineered for high-productivity machining of steel and cast iron, featuring a 15° clearance and a 1.6 mm corner radius for robust cutting performance Tiger·tec Gold coating for high wear resistance WKP35G grade optimised for steel and cast iron Parallelogram 85° form for secure seating 15° clearance and 1.6 mm corner radius Improved machining stability through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G grade delivers enhanced wear resistance and consistent edge stability during prolonged cutting cycles. As a result, the insert supports longer tool life and reduced interruption for index changes, which benefits batch production and continuous machining. The integrated chipbreaker F56 controls chip shape in the typical thermal and deformation conditions of machining steel and cast iron, aiding process security and predictable tool behaviour. Broad suitability for steel and cast-iron applications Designed according to ISO material groups P and K, the geometry and grade ensure effective performance across unalloyed and alloyed steel as well as abrasive cast iron. The parallelogram 85° plate form provides a compact clamping interface, improving rigidity in milling heads where radial and axial forces are significant. With a nominal insert size of 16 and the tailored chipflow characteristics, the component is suitable for operational setups that prioritise stable chip evacuation and repeatable surface quality. Durable geometry for strength and surface quality A 15° free angle combined with a 1.6 mm corner radius increases edge strength while maintaining a balance between cutting aggressiveness and surface finish. The tolerance class M supports consistent indexing and positional accuracy across tool changes, and the thickness code 06 contributes to mechanical stability in the toolholder. These geometry choices translate into fewer fixture adjustments and a reliable finish on workpieces with variable cutting conditions. Economic benefits and process predictability By reducing flank wear and promoting stable chip formation, the insert contributes to lower overall tooling costs and less machine downtime. The WKP35G chemistry and the Tiger·tec Gold coating are engineered for productive metal removal rates while retaining surface integrity, making the insert an economical option in mid- to high-volume milling operations. Proven in industrial environments, this solution supports consistent output and predictable maintenance cycles. For application advice or to secure supply of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for personalised consultation and stock information via email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: ADMT160616L-F56-WKP35G-WALTER Product: ADMT160616L-F56 WKP35G Type: Milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Free angle: 15° Corner radius: 1.6 mm Insert size: 16 Thickness code: 06 Plate form: Parallelogram 85° Tolerance class: M Special features Grade: WKP35G Chipbreaker: F56 Material application: P / K (steel and cast iron) Execution: T Stable chip formation and productive cutting Coated carbide (Tiger·tec Gold) FAQ What materials is this insert suited for? The ADMT160616L-F56 WKP35G insert is specified for ISO groups P and K, making it suitable for machining steel and cast iron with optimised chip control. How does the Tiger·tec Gold coating benefit the tool life? The Tiger·tec Gold coating on the WKP35G grade reduces abrasive and thermal wear, which extends life and maintains cutting-edge stability under demanding milling conditions. What role does the F56 chipbreaker play? The F56 chipbreaker shapes and breaks chips reliably when milling steel and cast iron, supporting continuous chip evacuation and minimising recutting risks. Is the geometry suitable for heavy-duty milling? Yes, the parallelogram 85° form combined with the 15° free angle and 1.6 mm corner radius provides mechanical stability for demanding milling operations. Can the insert be used in standard Walter toolholders? The insert matches common clamping interfaces for its plate form and size; compatibility should be checked against the specific toolholder dimensions before selection. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only and do not imply any affiliation. This listing describes original, factory-new items supplied by Walter Tools.
ADMT160616L-F56 WKP35S T Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Silver coating, a robust WKP35S carbide grade and a stable parallelogram geometry for consistent, productive milling of steel and cast iron; order genuine inserts through Metav Werkzeuge or consult our specialists for application-specific guidance. ADMT160616L-F56 WKP35S milling insert, Tiger·tec Silver coating, for steel & cast iron — Walter Tools The ADMT160616L-F56 WKP35S is a parallelogram milling insert engineered for high-productivity finishing and medium-heavy machining of steels and cast irons. Tiger·tec Silver coated for high wear resistance Optimised for steel and cast iron (ISO P & K) Parallelogram 85° form with 15° clearance angle 1.6 mm corner radius for stable chip formation Proven machining performance for steels and cast iron The coated carbide grade WKP35S, belonging to the Tiger·tec Silver series, offers a balanced combination of wear resistance and edge stability that is particularly suitable for ISO groups P (steel) and K (cast iron). The positive parallelogram geometry with an 85° approach and a 15° clearance angle contributes to a controlled engagement and predictable cutting forces, while the 1.6 mm corner radius supports consistent chip formation. These design choices translate into fewer insert changes and more productive cut time on compatible machining centres. Practical benefits in the production environment This indexable plate is configured for reliable behaviour in batch and continuous production. The F56 chipformer and the coated-carbide composition facilitate manageable chip breakage when working with typical steel grades and grey or nodular cast iron; the result is reduced risk of built-up edge and improved surface consistency. The insert’s geometry and coating make it a pragmatic choice for shops seeking a straightforward, durable solution for turning down cycle times and handling varying workpiece batches without complex process changes. Selection, handling and compatibility guidance The insert is supplied in the ADMT16 family size with a nominal plate size of 16 and a thickness designation of 06. It is made for applications where a medium corner radius and a robust coating yield repeatable results. For integration into existing toolholders, the parallelogram shape and tolerance class M ensure compatibility with holders designed for ADMT-style plates. Walter Tools’ carbide grades are developed for broad applicability; when in doubt about edge preparation or cutting data, consult the toolholder manufacturer or Metav Werkzeuge for tailored recommendations. Contact Metav Werkzeuge to discuss suitable cutting data, toolholder matches or to request application advice for Walter Tools ADMT inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ADMT160616L-F56-WKP35S-WALTER Designation: ADMT160616L-F56 WKP35S Product type: milling insert Manufacturer: Walter Tools Facts Size: 16 Thickness: 06 Clearance angle: 15° Corner radius: 1.6 mm Plate form: Parallelogram 85° Tolerance class: M Chipformer: F56 Grade: WKP35S Special features Series: Tiger·tec Silver Coating: coated carbide technology Material suitability: steel (ISO P) and cast iron (ISO K) Execution: T FAQ Is this insert suitable for roughing and finishing operations? The ADMT160616L-F56 WKP35S insert is designed primarily for finishing to medium-heavy machining; the WKP35S grade and the F56 chipformer favour stable finishes, while the plate geometry also allows productive light-medium roughing within recommended cutting parameter ranges. Which materials can be machined with this insert? The insert is suitable for steel (ISO P) and cast iron (ISO K) applications; the Tiger·tec Silver coating and WKP35S carbide grade are selected to cope with the thermal and abrasive conditions typical for those groups. How does the 15° clearance angle affect cutting performance? A 15° clearance contributes to a positive cutting geometry that helps reduce cutting forces and supports a predictable chip flow, improving surface quality and tool life under appropriate feeds and speeds. Can this insert be used in standard ADMT toolholders? The insert follows ADMT16 geometry; holders compatible with ADMT-style parallelogram plates and the specified tolerance class M will accept the plate, but holder manufacturer guidance should be followed for correct clamping and cutting parameters. What is the purpose of the 1.6 mm corner radius? The 1.6 mm radius provides a compromise between edge strength and achievable surface finish: it supports stable cutting under intermittent engagement and helps avoid premature chipping on tougher steels and interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; www.walter-tools.com The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned solely for explanatory purposes. There is no association between our company and the brands named. The item offered is original, factory-new goods from the manufacturer.
ADMT160616L-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the robust WSP45G grade for reliable chip control and extended tool life; the parallelogram 85° form with a 15° relief angle offers flexible mounting and stable cutting performance. Order the ADMT160616L-F56 WSP45G milling insert directly via Metav Werkzeuge or consult our specialists for application advice. ADMT160616L-F56 WSP45G milling insert – Tiger·tec Gold, PVD-coated, Walter Tools The ADMT160616L-F56 WSP45G is an indexable milling insert engineered for versatile PVD‑coated milling across steel, stainless steel and high‑temperature alloys in industrial machining. Tiger·tec Gold PVD coating Stable edge with 15° relief angle 1.6 mm corner radius for robustness For steel, stainless and superalloys Consistent chip control for efficient milling The Tiger·tec Gold series brings a PVD-coated carbide grade optimised for demanding milling tasks. The WSP45G grade combines toughness and wear resistance to maintain a stable cutting edge under variable cutting conditions. The integrated chipbreaker F56 encourages reliable chip formation and evacuation, reducing the risk of re-cutting and enabling continuous metal removal. This results in a measurable improvement in process stability and can contribute to lower tool consumption in production environments where consistent chip flow is essential. Durable geometry that reduces rework and downtime A 15° relief angle paired with a 1.6 mm corner radius gives the insert an effective balance between sharpness and edge strength. The parallelogram 85° shape allows flexible seating in milling cutters while delivering a secure cutting engagement. This geometry supports repeatable results and delays edge chipping, which helps to decrease unscheduled tool changes and the associated machine downtime. For operations focused on repeatability, the geometry translates into predictable component quality and fewer finish passes. Broad material capability with industrial reliability Designed for groups P, M and S according to ISO 513, this insert is suitable for unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys and titanium. The WSP45G composition handles the high temperatures and adhesive tendencies typical of these materials, offering improved resistance to build‑up and flank wear. Where workpieces generate significant thermal stress at the cutting zone, this grade helps to maintain contour accuracy and surface finish over longer tool life intervals. Productive choice for milling operations As part of Walter Tools’ Tiger·tec Gold family, the insert offers a practical route to increased productivity; its coating technology and robust grade promote longer tool life and consistent surface quality. The standard size and form make the insert compatible with a wide range of indexable milling cutters, simplifying tool inventory management. For engineering teams seeking predictable results and efficient throughput, this insert represents a balanced option between performance and operational economy. For reliable high‑performance milling with Tiger·tec Gold, contact Metav Werkzeuge for delivery and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ADMT160616L-F56-WSP45G-WALTER Designation: ADMT160616L-F56 WSP45G Manufacturer: Walter Tools Facts Relief angle: 15° Corner radius: 1.6 mm Plate size: 16 Plate thickness: 06 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated carbide) Chipbreaker: F56 Form: Parallelogram 85° Suitable for: Steel, stainless steel, superalloys FAQ What materials can this insert machine reliably? The ADMT160616L-F56 WSP45G is designed for ISO groups P, M and S, making it suitable for steel, stainless steel and heat‑resistant superalloys. How does the F56 chipbreaker affect machining? The F56 chipbreaker promotes controlled chip formation and evacuation; in the ADMT160616L-F56 WSP45G this contributes to stable cutting conditions and reduced re-cutting. Is the insert compatible with standard milling cutter holders? The parallelogram 85° form and nominal size 16 ensure compatibility with many indexable milling cutters designed for this geometry. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold PVD coating on the WSP45G grade enhances wear resistance and edge stability, extending effective tool life under varying cutting conditions. What does the 1.6 mm corner radius mean for surface finish? A 1.6 mm radius improves edge strength and helps achieve consistent surface quality; it is a compromise between finish and robustness for general milling tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
ADMT160616R-F56 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of reliable wear resistance, consistent chip control and broad material capability for uninterrupted milling performance. Order the inserts through Metav Werkzeuge or consult their advisors for application-specific recommendations. ADMT160616R-F56 WKP35G — Milling Indexable Insert, Tiger·tec Gold, for Steel and Cast Iron (Walter Tools) The ADMT160616R-F56 WKP35G is a parallelogram milling insert designed for medium- to high-productivity roughing and finishing in steel and cast iron. ADMT160616R-F56 WKP35G by Walter Tools Tiger·tec Gold coating for high wear resistance Positive 15° relief for stable cutting Suitable for steel and cast iron machining Consistent cutting life through advanced coating technology The ADMT160616R-F56 WKP35G combines Walter Tools’ Tiger·tec Gold coating with a coated carbide substrate to deliver reproducible performance across extended tool life cycles. The coating reduces flank wear and enhances thermal resistance, which supports stable cutting conditions even under fluctuating load. This leads to fewer tool changes, lower downtime and a predictable production rhythm — benefits that matter in both jobbing and serial machining environments. Geometry that improves chip control and surface quality The Parallelogram 85° form and the F56 chipbreaker are engineered to guide chips away from the cutting zone and reduce cutting forces. With a 1.6 mm corner radius and a positive 15° relief, the insert promotes steady engagement with the workpiece, which helps to maintain surface finish and dimensional consistency. The result is reduced rework and a more efficient machining sequence when producing critical components. Broad material compatibility for fewer tool variants Specified for material groups P (steel) and K (cast iron) in accordance with ISO classifications, the grade WKP35G adapts to the heat and abrasion characteristics typical of these materials. The carbide and coating combination is optimised for the chip formation of steels and for the abrasive nature of cast iron, enabling shop-floor flexibility and a reduced need for multiple specialised inserts. Integration into production lines and tooling systems With a straightforward designation and industry-standard dimensions, this insert suits typical cutter bodies that accept 16-size parallelogram inserts and a plate thickness of 06. The Tiger·tec Gold series supports reproducible results and good process security, making the insert a reliable choice for manufacturers who prioritise throughput and consistent quality. The tolerance class M assists with accurate indexation and repeatable seating in the toolholder. Contact Metav Werkzeuge for tailored application advice and availability of Walter Tools Tiger·tec Gold inserts — Metav Werkzeuge is available by e‑mail or phone to support selection and delivery. Technical Data Article number / SKU: ADMT160616R-F56-WKP35G-WALTER Label: Fräswendeschneidplatte ADMT160616R-F56 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Internal designation: ADMT160616R-F56 Facts Insert size: 16 Corner radius: 1.6 mm Relief angle: 15° Plate thickness: 06 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: F56 Shape: Parallelogram 85° Substrate: Coated carbide Suitable for: Steel (P) and Cast iron (K) Execution: T FAQ What materials can be machined with this insert? The ADMT160616R-F56 WKP35G insert is designed for steel (P) and cast iron (K) applications according to ISO groupings, offering reliable performance in both materials. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WKP35G grade enhances wear resistance and thermal stability, which helps to extend tool life and maintain cutting performance in demanding milling operations. Which chipbreaker is fitted and what is its effect? The insert features the F56 chipbreaker, developed to produce controlled chips and reduce cutting forces, improving surface finish and process reliability. Is this insert compatible with standard 16-size cutter bodies? Yes — the insert’s designation and parallelogram form correspond to common cutter systems that accept size 16 inserts and a plate thickness of 06. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not imply any affiliation with our company. The offered article is an original, brand-new product from the manufacturer.
ADMT160616R-F56 WKP35S Wendeplatten - Walter Tools
The combination of a robust Tiger·tec Silver coating and the optimised F56 chipformer delivers dependable wear resistance and stable chip control for productive milling of steel and cast iron. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT160616R-F56 WKP35S milling insert — Parallelogram 85°, R1.6, Walter Tools The ADMT160616R-F56 WKP35S is a parallelogram milling insert engineered for efficient face and shoulder milling in steel and cast iron applications. Tiger·tec Silver coating technology Optimised chipformer F56 for stable chips Parallelogram 85° geometry for axial cuts Suitable for ISO P (steel) and K (cast iron) Prolonged tool life through advanced coating The Tiger·tec Silver coating combined with the WKP35S grade provides a balanced resistance to abrasive wear and thermal loading, which translates into longer intervals between indexings and fewer tool changes. Designed as a coated carbide insert, the surface treatment reduces flank and crater wear during continuous and interrupted cuts, helping to sustain component tolerances over longer production runs. This advantage becomes particularly relevant when machining medium to high-alloy steels and a wide range of grey and ductile cast irons. Consistent chip control and stable cutting performance The insert’s optimised F56 chipformer and its parallelogram 85° geometry ensure controlled chip segmentation and predictable evacuation in both up and down milling. The 15° free angle and the R1.6 corner radius offer a reliable balance between edge strength and surface finish, enabling stable cutting at common feed rates for face milling and shoulder operations. This geometry reduces vibration sensitivity, which supports repeatable dimensional accuracy across batch production. Practical benefits for workshop and production environments Specified for ISO groups P (steel) and K (cast iron), the grade is suitable for a broad material range, reducing the need for multiple specialised grades on the tooling shelf. The insert’s tolerance class M supports consistent seating in standard cutters, simplifying changeover and inspection procedures. For procurement and planning, the standardised designation means straightforward integration into existing tool management systems and clear traceability across production orders. Application guidance and process relevance When combined with appropriate cutter bodies and clamping, this insert supports productive machining strategies that focus on cycle-time reduction and process stability. In practice, the WKP35S grade is recommended where a compromise between wear resistance and toughness is required, for example in mixed production runs of alloyed steels and cast parts. For best results, pair the insert with coolant strategies and cutting parameters aligned to material group and depth of cut to exploit the coating’s thermal properties and the chipformer’s geometry. For a tailored recommendation on inserting the ADMT160616R-F56 WKP35S into existing milling operations, contact Metav Werkzeuge for technical consultation and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: ADMT160616R-F56-WKP35S-WALTER SKU: ADMT160616R-F56-WKP35S-WALTER Label: Fräswendeschneidplatte ADMT160616R-F56 WKP35S Walter Tools Facts Geometry: Parallelogram 85° Free angle: 15° Corner radius: 1.6 Size: 16 Thickness: 06 Chipformer: F56 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Material suitability: Steel (ISO P) Material suitability: Cast iron (ISO K) Designation: ADMT160616R-F56 Product type: Fräswendeschneidplatte Manufacturer: Walter Tools FAQ What materials is this insert intended for? The ADMT160616R-F56 WKP35S insert by Walter Tools is specified for ISO groups P and K, meaning it is designed for machining various steels and cast irons. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on the ADMT160616R-F56 WKP35S increases wear resistance and thermal stability, which helps to extend tool life and maintain consistent cutting performance in continuous milling tasks. Which cutter geometry suits this insert best? The parallelogram 85° form and the F56 chipformer are ideal for face and shoulder milling cutters that require predictable chip flow; these features make the insert well suited to stable axial cutting strategies. What does the R1.6 corner radius mean for surface finish? A corner radius of 1.6 provides a compromise between edge strength and achievable surface quality; the ADMT160616R-F56 WKP35S supports good finish in general-purpose milling while preserving edge robustness. Is the insert compatible with standard clamping systems? Yes, the insert’s tolerance class M and standard designation ADMT160616R-F56 facilitate straightforward seating in many common Walter-compatible cutter bodies and standard toolholders. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Trademarks and product names mentioned are the property of their respective owners. The brand name in the product listing reflects the original manufacturer. There is no affiliation between Metav Werkzeuge and the mentioned brands; the offered item is an original, factory-new product of the stated manufacturer.
ADMT160616R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from a combination of high process security, heat-resistant coating and reliable chip control that keeps production steady and predictable. Choose this solution for efficient machining of rostfreier Stahl and high-temperature alloys and contact Metav Werkzeuge for application advice or ordering. ADMT160616R-F56 WSM35G milling insert — Tiger·tec Gold, for rostfreier Stahl and superalloys (Walter Tools) The ADMT160616R-F56 WSM35G is a precision milling insert engineered for demanding operations on rostfreier Stahl and heat-resistant superalloys, offering stable cutting and consistent tool life. Tiger·tec Gold coating for thermal stability Optimised chip control with F56 geometry 15° clearance angle for secure cutting edge support 1.6 mm corner radius for robust performance Consistent performance when machining tough alloys The insert’s Tiger·tec Gold coating and the WSM35G grade combine to provide excellent thermal resistance and edge stability during prolonged cuts. For applications in rostfreier Stahl and temperature-resistant superalloys, this combination reduces the risk of built-up edge and maintains cutting integrity. The result is fewer interruptions for tool changes and a more predictable production rhythm, which supports higher process efficiency and reduced scrap rates. Reliable chip formation and surface quality Equipped with the F56 chipbreaker, the geometry is designed to channel chips reliably away from the cutting zone, improving evacuation in interrupted cuts and shoulder milling. Better chip control leads directly to improved surface finish and reduced rework. The insert’s parallelogram 85° form and 15° clearance help maintain a stable engagement with the workpiece, translating into consistent dimensional accuracy on components produced in rostfreier Stahl. Robust edge life for demanding setups A 1.6 mm corner radius provides mechanical strength at the cutting edge, helping the grade withstand heavier feeds and interrupted cuts without premature chipping. The coated cemented carbide substrate in this series supports repeatable edge performance in continuous production environments. This robustness contributes to longer tool cycles and lower tooling-related downtime, a clear economic advantage for batch and series manufacture. Practical choice for machining strategy and tool management The insert’s designation and format fit common toolholders for indexable milling; the standardised shape simplifies inventory and tool management. Using the ADMT160616R-F56 WSM35G or its equivalent insert allows the integration of a heat-resistant grade into established toolsets, aiding process standardisation. For engineers planning operations on rostfreier Stahl and superalloys, this insert offers a straightforward way to improve cut stability and consistency across multiple machines. Contact Metav Werkzeuge for tailored application support and to specify the Walter Tools Tiger·tec Gold insert for rostfreier Stahl and superalloys — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: ADMT160616R-F56-WSM35G-WALTER Product type: milling indexable insert Designation: ADMT160616R-F56 Grade: WSM35G Facts Insert size: 16 mm Thickness: 06 Clearance angle: 15° Corner radius: 1.6 mm Special features Series: Tiger·tec Gold Chipbreaker: F56 Form: Parallelogram 85° Material applicability: S / M (superalloys and rostfreier Stahl) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The ADMT160616R-F56 WSM35G insert is specified for machining rostfreier Stahl and heat-resistant superalloys (S / M), optimised for applications prone to high temperatures and work-hardening. How does the Tiger·tec Gold coating help in production? Tiger·tec Gold on the WSM35G grade increases thermal resistance and edge stability, which extends tool life and supports steady production when cutting rostfreier Stahl and tough alloys. Which cutting situations benefit most from the F56 chipbreaker? The F56 geometry excels in shoulder milling and interrupted cuts where reliable chip control reduces recutting and improves surface quality with minimal intervention. Is the insert compatible with standard ADMT toolholders? The insert follows the ADMT designation and parallelogram 85° form, making it compatible with toolholders designed for that ISO-type insert family. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160616R-F56 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of WSM45X coated carbide and the F56 chipbreaker for stable chip formation and reliable cutting in rostfreier Stahl; order the insert via Metav Werkzeuge or consult our specialists for process integration. ADMT160616R-F56 WSM45X milling insert — Walter Tools, coated carbide with F56 chipbreaker ADMT160616R-F56 WSM45X is a precision milling insert designed for demanding roughing and semi-finishing of rostfreier Stahl and heat-resistant alloys Coated carbide WSM45X grade F56 chipbreaker for stable chips Suitable for rostfreier Stahl and superalloys Parallelogram 85° with 15° clearance Consistent chip control for challenging materials The insert relies on the WSM45X coated carbide to deliver predictable results when machining materials that tend to form long, sticky chips. Combined with the F56 chipbreaker, the geometry promotes controlled chip formation and evacuation, reducing the risk of build-up on the cutting edge. This results in fewer interruptions, more stable cutting forces and a reduction in rework cycles—key advantages for production-oriented environments that prioritise throughput and component quality. Geometry that supports productivity and tool life The parallelogram 85° shape and 15° clearance angle give a robust cutting edge with a favourable entry angle for heavy cuts. The specified corner radius of 1.6 mm balances edge strength and surface finish, making the insert suitable for heavier passes while maintaining acceptable component tolerances. The standard size code of 16 and thickness code 06 match common milling body pockets, enabling straightforward tool-body integration and fast changeovers on multi-tool setups. Designed for industrial use and straightforward integration Made for series production, the insert’s features reduce process variability: the coated grade supports temperature resistance and edge stability when machining rostfreier Stahl and ISO S materials, while the tolerance class M ensures consistent seating and repeatable positioning in the tool holder. For workshop planners and production engineers, this means shorter qualification times and fewer trial cuts. If further adaptation is needed for a specific cutter body or cutting strategy, technical advice is available to align the insert choice with machining parameters and coolant strategies. Contact Metav Werkzeuge for tailored advice on integrating the Walter Tools WSM45X inserts into the workflow and for current availability — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: ADMT160616R-F56-WSM45X-WALTER Designation: ADMT160616R-F56 WSM45X Product type: milling insert (Fräswendeschneidplatte) Manufacturer: Walter Tools Facts Size: 16 mm Thickness code: 06 Corner radius: 1.6 mm Clearance angle: 15° Plate form: Parallelogram 85° Tolerance class: M Special features Coated carbide grade WSM45X (beschichtetes Hartmetall) Chipbreaker: F56 Series: Walter Schneidstoffsorte - Serie offen Target materials: rostfreier Stahl (ISO M) and heat‑resistant superalloys / titanium (ISO S) Execution: T Stable edge and supported chip formation for productive machining FAQ What materials is this insert best suited for? The ADMT160616R-F56 WSM45X insert is optimised for rostfreier Stahl (ISO M) and can also be applied to heat‑resistant superalloys and titanium (ISO S) depending on the cutter geometry. How does the F56 chipbreaker affect machining? The F56 chipbreaker on the ADMT160616R-F56 WSM45X promotes short, controlled chips and improves evacuation, which helps maintain a stable cutting edge and consistent cycle times. Is the insert compatible with standard milling cutter bodies? The ADMT160616R-F56 format corresponds to common 16-series pockets; the tolerance class M supports repeatable seating, but cutter body compatibility should be verified against the holder’s seat geometry. What operational benefits can be expected in series production? Using the WSM45X grade with the F56 geometry typically leads to improved process reliability, reduced edge build-up when cutting rostfreier Stahl and fewer unscheduled tool changes, supporting higher productivity. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for identification and explanation only. There is no affiliation between our company and the named brands. The offered item is original factory‑new goods of the manufacturer. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
ADMT160616R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold WSP45G coated grade and the 85° parallelogram form with a 1.6 mm corner radius for reliable chip control and long tool life when machining steel, stainless steel and heat‑resistant alloys; order via Metav Werkzeuge or request advice from our consultants for process optimisation. ADMT160616R-F56 WSP45G milling indexable insert — for steel, stainless steel and superalloys | Walter Tools The ADMT160616R-F56 WSP45G is a coated carbide milling indexable insert designed for high‑productivity milling of steels, stainless steels and heat‑resistant superalloys in industrial machining applications. Tiger‑tec Gold coated carbide grade WSP45G Suitable for steel, stainless steel and superalloys 85° parallelogram form with 1.6 mm corner radius Deliver consistent cycle times with a wear‑resistant grade The insert’s Tiger‑tec Gold coating and WSP45G grade are engineered for stable cutting edges and predictable wear behaviour, which directly supports lower tool consumption and fewer unplanned interruptions. The combination of the coated carbide substrate and the chipbreaker geometry contributes to effective chip control, reducing the risk of rework and machine downtime. For production environments where reproducible cycle time is critical, this grade offers a balance between toughness and wear resistance that helps to sustain cutting performance over longer runs. Reduce setup changes through broad material compatibility Designed for groups P / M / S, the indexable solution covers steel, stainless steel and heat‑resistant alloys, meaning fewer tool changes across mixed‑material production runs. The insert’s geometry — a parallelogram 85° form with a 1.6 mm corner radius — delivers a robust edge for interrupted cuts while still enabling good surface quality. This versatility streamlines process planning and allows machining centres to maintain throughput when handling varied workpiece materials without compromising edge security. Improve process security and surface quality in milling The positive relief angle of 15° and the dedicated F56 chipbreaker promote stable cutting under thermal and mechanical load, supporting both roughing and semi‑finishing tasks where control of built‑up edge and temperature is essential. The insert’s tolerance class M and the specified thickness code ensure reproducible seating and repeatable performance in indexable cutter systems. Together, these design elements enhance process security, reduce burr formation and help maintain consistent component surface finish across batches. For productivity‑critical milling, contact Metav Werkzeuge for tailored cutting data and availability of the Walter Tools Tiger‑tec Gold WSP45G ADMT160616R‑F56 insert — our consultants will advise on optimal application and tooling integration. Technical Data Article number: ADMT160616R-F56-WSP45G-WALTER Product designation: ADMT160616R-F56 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Numbers / Core Technical Data Plate size: 16 Corner radius: 1.6 mm Relief angle: 15° Thickness code: 06 Parallelogram angle: 85° Tolerance class: M Special features Grade: WSP45G Coating technology: Tiger‑tec Gold (PVD) Chipbreaker: F56 Form: Parallelogram Applicable materials: P / M / S (steel, stainless steel, superalloys) Execution: T FAQ Is this insert suitable for stainless steel machining? Yes. The ADMT160616R‑F56 WSP45G insert from Walter Tools is specified for ISO group M (stainless steels) and provides improved chip control and edge stability when machining austenitic and other stainless grades. What advantages does the Tiger‑tec Gold coating offer? The Tiger‑tec Gold coating on the WSP45G grade combines thermal resistance and wear protection to extend edge life, promote consistent wear patterns and support higher process reliability in demanding milling applications. For which milling tasks is this insert most appropriate? The insert is suited to high‑productivity milling operations where a balance of toughness and wear resistance is required — typical uses include general milling of steels, semi‑finishing and applications involving interrupted cuts in tougher materials. What are the key geometric specifications to consider? The insert features a parallelogram 85° form with a 1.6 mm corner radius and a 15° relief angle; these parameters influence the achievable surface finish, edge stability and recommended cutting parameters for the toolholder system. How does the F56 chipbreaker perform across materials? The F56 chipbreaker is designed to manage chips effectively across the P / M / S material groups, improving evacuation and reducing the likelihood of re‑cutting chips in both continuous and interrupted cutting scenarios. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names and protected designations are used for explanatory purposes only and do not indicate any association between our company and the mentioned brands. The offered article is original, factory‑new merchandise of the manufacturer.
ADMT160620R-F56 WKP35G Wendeplatten - Walter Tools
Benefit from a highly productive, wear‑resistant milling solution that combines the Tiger‑tec Gold coating with the WKP35G grade for reliable machining of steel and cast iron; order directly via Metav Werkzeuge or contact the consultants for tailored recommendations. ADMT160620R-F56 WKP35G — Indexable milling insert, Tiger‑tec Gold, 15° relief — Walter Tools The ADMT160620R-F56 WKP35G is an indexable milling insert designed for high‑productivity milling of steels and cast iron with a parallelogram 85° form for stable clamping. Tiger‑tec Gold coating for wear resistance Suitable for steel and cast iron (ISO P/K) Parallelogram 85° form for secure clamping 15° relief angle with 2 mm corner radius Boosted productivity with proven coating technology The Tiger‑tec Gold technology and the WKP35G coated carbide grade deliver a combination of wear resistance and thermal stability that supports higher cutting rates and longer tool life. Designed for the typical heat and chip behaviour when machining steel and cast iron, this cutting grade promotes stable chip formation and reduced flank wear. As the substrate is a coated carbide, predictable edge retention is achieved across a broad range of production conditions, which in turn reduces downtimes for tool change and regrinding. Geometry that delivers machining stability and surface quality The parallelogram 85° form and a relief angle of 15° ensure a secure seating and repeatable cutting geometry. With a 2 mm corner radius, the insert balances edge strength and surface finish, enabling consistent dimensional accuracy under intermittent or heavy engagement. The robust geometry supports reduced vibration and improved process stability, which benefits cycle time and workpiece quality in batch and continuous milling operations. Chip control and application versatility in one grade Equipped with the chipbreaker F56, the insert enables reliable chip control for a wide variety of feeds and depths of cut, reducing the risk of entanglement and facilitating efficient swarf evacuation. Classified for ISO groups P/K, the insert is suitable for machining both unalloyed and alloyed steels as well as cast iron, making it a versatile choice for automotive, general engineering and heavy‑duty workshop environments. The cutting system integrates well into standard indexable cutter bodies and is intended for customers seeking predictable performance and easy process planning. For applications that demand constant results with Walter Tools' Tiger‑tec Gold inserts, contact Metav Werkzeuge for technical advice and secure supply — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT160620R-F56-WKP35G-WALTER Article designation: ADMT160620R-F56 WKP35G Series: Tiger‑tec Gold Grade: WKP35G Form: Parallelogram 85° Chipbreaker: F56 Manufacturer: Walter Tools Numbers / Core technical data Relief angle: 15° Corner radius: 2 mm Plate size: 16 mm Thickness: 06 mm Tolerance class: M Materials / Special features Coating / technology: Tiger‑tec Gold Substrate: coated carbide Applicable materials: Steel (P), Cast iron (K) Designation: ADMT160620R-F56 FAQ What materials is this insert suitable for? The ADMT160620R-F56 WKP35G insert is designed for steel and cast iron (ISO P/K), with the WKP35G grade optimised for these material groups. How does the Tiger‑tec Gold coating benefit the machining process? The Tiger‑tec Gold coating on the WKP35G grade increases thermal resistance and reduces abrasive wear, which helps to extend tool life and maintain consistent cutting performance. What is the effect of the chipbreaker F56? The chipbreaker F56 promotes controlled chip formation and evacuation, improving machining safety and reducing the likelihood of chip re‑cutting or workpiece damage. Can the insert be used in standard indexable milling cutters? Yes, the ADMT160620R-F56 WKP35G is intended for use in compatible indexable cutter bodies where a parallelogram 85° insert form is specified. What advantages does the 2 mm corner radius provide? A 2 mm corner radius improves edge robustness for interrupted cuts and contributes to better surface finish and dimensional stability under heavier cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
ADMT160620R-F56 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for stable wear resistance and consistent machining of steel and cast iron; the parallelogram 85° form with chipbreaker F56 provides reliable chip control and low cutting forces. Order the ADMT160620R-F56 WKP35S directly via (Metav Werkzeuge) or ask our consultants if needed. ADMT160620R-F56 WKP35S – Indexable milling insert, Tiger·tec Silver by Walter Tools The ADMT160620R-F56 WKP35S is an indexable milling insert in parallelogram 85° form, engineered for productive finishing and semi-finishing of steel and cast iron components. Tiger·tec Silver coating for stable wear resistance WKP35S grade for steel and cast iron machining Parallelogram 85° form with 15° relief angle High productivity through advanced coating and grade The combination of Tiger·tec Silver and the WKP35S cutting grade delivers a balance of heat resistance and abrasion control, which translates into longer tool life and fewer index changes. This makes the insert particularly suitable where continuous, high-volume milling is required: the coating reduces flank and crater wear, while the grade optimises performance on both steel and cast iron, improving overall process efficiency and lowering downtime for insert replacement. Geometry that stabilises cutting and improves surface quality The parallelogram 85° form and the 15° relief angle create positive cutting engagement, reducing the tangential cutting forces and enabling stable milling at varying depths. Combined with the chipbreaker F56, this geometry supports predictable chip formation and evacuation, which in turn helps maintain consistent surface finish. The corner radius 2 contributes to edge strength and aids in producing uniform part geometry with reduced risk of workpiece distortion. Broad applicability for steel and cast iron operations Designed for the ISO groups P and K, the insert is effective across a wide range of unalloyed and alloyed steels as well as grey and nodular cast iron. The insert’s specification supports both finishing and light roughing tasks depending on cutter geometry and process parameters. For operations that require flexibility across workpiece materials, the combination of grade and chip control reduces the need for multiple specialised inserts, simplifying tool management and inventory. Practical handling and integration in tool systems With a nominal size 16 and thickness 06, the insert fits standard milling cutter pockets that accept parallelogram 85° inserts; tolerance class M ensures repeatable seating and alignment in the toolholder. The designation ADMT160620R-F56 identifies both the geometry and the integrated chipbreaker, which assists in quick selection and replacement. Such clarity in design and coding supports process planners and shopfloor staff in maintaining consistent machining parameters and scheduling preventive changeovers. For robust, reliable milling with Walter Tools' Tiger·tec Silver technology, contact Metav Werkzeuge for tailored advice and local availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: ADMT160620R-F56-WKP35S-WALTER Product type: Indexable milling insert Series: Tiger·tec Silver Grade: WKP35S Brand: Walter Tools Facts Relief angle: 15° Corner radius: 2 Size: 16 Thickness: 06 Tolerance class: M Special features Chipbreaker: F56 Plate form: Parallelogram 85° Material suitability: P / K (steel, cast iron) Designation: ADMT160620R-F56 WKP35S Execution: T FAQ What materials is this insert suitable for? The ADMT160620R-F56 WKP35S is formulated for ISO groups P and K, making it suitable for steel and cast iron machining applications. How does the Tiger·tec Silver coating affect tool life? The Tiger·tec Silver coating on the WKP35S grade improves heat and wear resistance, which typically extends tool life and supports more consistent cutting performance. What kind of chip control can be expected with chipbreaker F56? The chipbreaker F56 promotes controlled chip formation and evacuation during milling, reducing re-cutting and aiding in surface finish stability. Is the insert compatible with standard parallelogram 85° toolholders? Yes, the parallelogram 85° form and the specified dimensions make this insert compatible with toolholders designed for that geometry, ensuring correct seating and repeatability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
ADMT160620R-F56 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WSM35G grade and a stable chipformer for reliable machining of stainless steels and heat‑resistant alloys; order original Walter Tools inserts via Metav Werkzeuge or contact our consultants for application support. ADMT160620R-F56 WSM35G milling indexable insert — Tiger‑tec Gold, for stainless steels — Walter Tools ADMT160620R-F56 WSM35G is a coated carbide milling insert designed for heavy machining of stainless steel and heat‑resistant superalloys Tiger‑tec Gold coating for extended tool life WSM35G grade for stainless and superalloys Parallelogram 85° shape for flexible milling 15° relief and 2.0 mm corner radius Increase uptime with optimised coating and grade selection The combination of the Tiger‑tec Gold coating and the WSM35G carbide grade delivers improved wear resistance and thermal stability, which translates into longer tool life and fewer interruptive tool changes. This insert is engineered for demanding tasks such as the machining of stainless steel and heat‑resistant superalloys, where stable cutting edges and controlled chip formation are essential. The coating reduces edge wear under elevated temperatures and supports consistent performance across longer cycles, helping to maintain productivity on series production runs. Consistent chip control and secure cutting edge for challenging materials A well‑designed chipformer and the F56 geometry promote predictable chip breakup and evacuation, which lowers the risk of built‑up edge and improves surface integrity. For operations involving tough, low‑thermal‑conductivity materials, reliable chip control reduces downtime related to chip jams and rework. The insert’s specifications favour secure cutting edges that withstand thermal and mechanical stress, enabling smoother feeds and higher metal removal rates while preserving dimensional accuracy and surface finish. Geometry that enhances versatility and process stability The parallelogram 85° shape and the 15° relief angle make this insert adaptable to a range of milling strategies, from face milling to shoulder operations. The 2.0 mm corner radius supports robust edge strength for interrupted cuts and provides a balance between edge stability and surface quality. Such geometry allows machinists to adopt productive cutting parameters without sacrificing component tolerances, supporting a smoother workflow and reduced need for secondary finishing. Application guidance and industrial relevance Designed primarily for stainless steel and high‑temperature alloys, the insert is particularly suitable where heat generation and adhesion tendencies demand a cutting material that sustains edge integrity. As a coated, indexable milling insert within the Tiger‑tec Gold family, it provides a practical solution for shops seeking predictable performance across a broad materials spectrum. For specific cycle optimisation, combining the insert with appropriate cutter bodies and coolant strategies will further enhance process security and extend wear life. Contact Metav Werkzeuge for application advice, availability of original Walter Tools Tiger‑tec Gold inserts and to arrange a tailored recommendation for specific machining tasks — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical data SKU: ADMT160620R-F56-WSM35G-WALTER Article name: Fräswendeschneidplatte ADMT160620R-F56 WSM35G Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Manufacturer: Walter Tools Dimensions / Core data Relief angle: 15° Corner radius: 2 mm Insert size: 16 Thickness: 06 Plate form: Parallelogram 85° Materials & Features Coating: Tiger·tec Gold Chipbreaker: F56 Material suitability: S / M (superalloys/titanium and stainless steels) Execution: T FAQ What materials is this insert best suited for? The ADMT160620R-F56 WSM35G insert from Walter Tools is specified for stainless steels and heat‑resistant superalloys, offering thermal stability and secure chip control for these groups. How does the Tiger‑tec Gold coating benefit milling performance? Tiger‑tec Gold coating on the WSM35G grade improves wear resistance and heat tolerance, which helps the Walter Tools insert maintain cutting edge stability and extend service life under demanding conditions. Which cutter geometries pair well with this insert? Parallelogram cutter bodies and holders that accept 85° inserts are suitable; the combination of the insert’s 15° relief and F56 chipformer supports flexible milling strategies and reliable chip evacuation. Is this insert suitable for interrupted cuts and roughing? Yes, the 2.0 mm corner radius and robust grade make the insert appropriate for interrupted cuts and heavier engagement where edge strength is required. Manufacturer: The Walter AG (brand: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
ADMT160620R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating and versatile P/M/S suitability to keep milling processes productive and predictable; order directly via Metav Werkzeuge or request advice from our consultants for specification matching. ADMT160620R-F56 WSP45G milling insert — Tiger·tec Gold, chipbreaker F56, Walter Tools A robust ADMT160620R-F56 WSP45G milling insert designed for high‑performance milling of steel, stainless steel and heat‑resistant superalloys, offering a stable cutting edge and efficient chip control in demanding production environments Tiger·tec Gold PVD coating for high wear resistance Versatile for steel, stainless and superalloys 15° clearance angle for stable cutting Parallelogram 85° form with r2 corner radius Consistent tool life through advanced coating technology The Tiger·tec Gold coating on this milling insert delivers improved wear resistance and thermal stability compared with uncoated grades, extending component life in serial milling. The PVD‑based coating supports a stable cutting edge, which reduces flank wear under variable cutting conditions and contributes to predictable regrinding intervals. For production planners this means fewer tool changes and more uptime on milling centres. Reliable chip control and edge geometry for secure machining Equipped with chipbreaker F56 and a 15° clearance angle, the insert promotes consistent chip formation and evacuation during face and profile milling. The specified geometry reduces the risk of built‑up edge on tough materials and improves surface integrity. The parallelogram 85° shape and corner radius 2 provide a balance between robustness and finishing performance, making the grade suitable for both light finishing passes and more demanding roughing operations. Broad material capability reduces tool inventory Specified for material groups P / M / S, the insert is suitable for unalloyed and alloyed steel, stainless steels, and heat‑resistant superalloys including titanium—making it a versatile choice for mixed‑material production runs. The grade's composition and coating are optimised for the thermal and mechanical loads typical of these groups, supporting secure chip formation and stable cutting edges across applications, which helps to reduce the number of tool types held in stock. Production benefits and practical handling With a compact plate size designation and a medium tolerance class M, the insert offers repeatable seating and indexability in compatible milling cutters. The combination of Tiger·tec Gold technology and the geometry features delivers a convincing cost‑per‑workpiece ratio in series production, while the proven grade lineage ensures reproducible results batch after batch. This mix of durability and process stability supports shorter citation cycles and predictable machining quality. For high‑duty milling applications, rely on Walter Tools' Tiger·tec Gold insert — contact Metav Werkzeuge to confirm cutter compatibility and order the ADMT160620R-F56 WSP45G directly or request tailored technical advice. Technical data Article number: ADMT160620R-F56-WSP45G-WALTER Manufacturer: Walter Tools Product type: Milling insert (indexable) Facts Free angle: 15° Corner radius: 2 mm Plate size: 16 Plate thickness: 06 Tolerance class: M Special features Coating: Tiger·tec Gold (PVD) Grade/sort: WSP45G Chipbreaker: F56 Plate form: Parallelogramm 85° Material suitability: P / M / S Series: Tiger‑tec Gold Execution: T FAQ What materials can this insert machine reliably? The ADMT160620R-F56 WSP45G insert is specified for P / M / S groups and is suited for steel, stainless steels and heat‑resistant superalloys including titanium. Which coating technology is used and what advantage does it bring? The Tiger·tec Gold PVD coating on this Walter Tools insert increases wear resistance and thermal stability, helping to extend tool life under industrial milling conditions. How does the chipbreaker affect machining performance? The F56 chipbreaker promotes predictable chip formation and evacuation, supporting surface quality and reducing the likelihood of built‑up edge during both roughing and finishing passes. Is the insert suitable for mixed‑material production environments? Yes, the insert’s P / M / S suitability and robust geometry make it a practical choice where batches include steel, stainless steel and superalloys, helping to lower tooling variety. What does tolerance class M mean for clamping and repeatability? Tolerance class M indicates medium positional accuracy for seating and indexing in compatible toolholders, contributing to reproducible mounting and process stability. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision cutting tools for metalworking and forms part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners and are mentioned for explanatory purposes only. There is no connection between our company and the named brands; the offered item is an original, factory‑new product from the manufacturer.
ADMT160625L-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Gold PVD-coated grade and a robust parallelogram geometry to secure consistent chip control and long tool life in demanding milling operations; order the insert directly via Metav Werkzeuge or contact our consultants for application support. ADMT160625L-F56 WSP45G Milling insert (Tiger·tec Gold) — Walter Tools ADMT160625L-F56 WSP45G is a coated carbide milling insert designed for versatile roughing and semi-finishing of steel, stainless steel and heat-resistant alloys in modern production environments. Tiger·tec Gold PVD-coated grade WSP45G Parallelogram 85° geometry for robust milling 15° clearance angle, 2.5 mm corner radius Proven for steel, stainless and superalloys Extended tool life through advanced coated grade The Tiger·tec Gold grade WSP45G is a PVD-coated carbide engineered for a balance of toughness and wear resistance. This combination reduces flank wear and supports a stable cutting edge under the thermal loads typical for milling operations. As a result, the insert achieves longer tool life and fewer index changes, which helps to maintain productivity and reduce total machining costs. Technical users will appreciate the predictable performance when switching from conventional grades to this modern coating technology. Geometry that stabilises cutting forces and chip flow The parallelogram 85° shape with a 15° clearance angle and 2.5 mm corner radius is tuned for milling where robustness and chip control matter. The geometry directs chips away from the cutting zone and distributes cutting forces over a larger area of the insert, reducing the risk of chipping under interrupted cuts. This leads to steadier spindle loads and improved surface quality on the workpiece while allowing secure clamping in standard milling cutter pockets. Proven material range for demanding alloys Rated for P / M / S applications, the insert is suitable for a wide variety of materials: general Stahl (steel), rostfreier Stahl (stainless steel) and heat-resistant superalloys such as titanium-based materials. The WSP45G grade is formulated to handle the thermal and mechanical challenges presented by these groups, supporting consistent chip formation and reduced built-up edge. For operations where diverse workpiece materials are encountered, this versatility reduces the need for multiple dedicated grades. Practical integration in production workflows The insert is offered in the ADMT160625L-F56 form factor with tolerance class M and thickness code 06, enabling straightforward replacement in compatible toolholders. The integrated F56 chipbreaker supports controlled chip segmentation at typical milling feeds, lowering the likelihood of long, entangling chips and improving operator safety. Combined with the insert dimensions (size code 16) and the proven Tiger·tec Gold technology, the solution is geared towards secure, repeatable performance in series production and jobbing shops alike. For application advice and to secure suitable quantities of this Tiger·tec Gold milling insert, contact Metav Werkzeuge for ordering and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: ADMT160625L-F56-WSP45G-WALTER Article: ADMT160625L-F56 WSP45G Product type: Milling insert (Fräswendeschneidplatte) Series: Tiger-tec Gold Grade: WSP45G Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 2.5 mm Insert size: 16 Thickness code: 06 Tolerance class: M Special features Parallelogram 85° insert shape Chipbreaker: F56 Coating: Tiger·tec Gold (PVD-coated) Applicable materials: Steel (P), Stainless steel (M), Superalloys / Titanium (S) FAQ What materials is this insert suitable for? The ADMT160625L-F56 WSP45G insert in the Tiger·tec Gold family is suitable for steel, stainless steel and heat-resistant superalloys, covering ISO groups P, M and S. What are the key geometry benefits of the insert? The parallelogram 85° shape with a 15° clearance and a 2.5 mm corner radius improves chip control and distributes cutting forces to reduce the risk of chipping during interrupted cuts. Which chipbreaker is integrated and what does it do? This insert features the F56 chipbreaker, designed to promote short, controllable chips at typical milling feeds, enhancing productivity and operator safety. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold PVD coating increases wear resistance while retaining edge toughness, which contributes to longer tool life and consistent performance under varying thermal loads. Is this insert compatible with standard toolholders? The insert form ADMT160625L-F56 corresponds to common milling pocket geometries; compatibility should be verified with the toolholder manufacturer based on form and tolerance class M. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
ADMT160625R-F56 WKP35G T Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WKP35G grade and the stable parallelogram geometry for uninterrupted production. The insert's 15° clearance and 2.5 mm corner radius ensure predictable chip formation and long edge life; order the ADMT160625R-F56 WKP35G directly via Metav Werkzeuge or consult our technical team for application support. ADMT160625R-F56 WKP35G — Indexable milling insert, Tiger‑tec Gold, for steel and cast iron — Walter Tools The ADMT160625R-F56 WKP35G is a parallelogram 85° indexable milling insert from the Tiger‑tec Gold series, designed for productive milling of steel and cast iron in demanding industrial applications Tiger‑tec Gold coating for extended tool life Suitable for steel and cast iron machining 15° clearance angle, parallelogram 85° 2.5 mm corner radius for stable cutting Maximise productivity with consistent edge life The coated WKP35G grade combines a wear-resistant Tiger‑tec Gold surface with optimised substrate toughness to provide edge stability during both roughing and semi-finishing operations. This results in fewer insert changes and reduced non-productive time, which directly improves machine utilisation. The indexable insert geometry and robust coating are specifically aimed at keeping process parameters stable when machining common steels and cast irons, so cycle times can be shortened without sacrificing tool life. Predictable chip control and surface quality The insert's F56 chipbreaker and parallelogram 85° form produce consistent chip shaping under varying cutting conditions, improving transport away from the cutting zone and reducing the risk of built-up edge. The 15° clearance angle and 2.5 mm corner radius help to dampen vibrations and deliver a reliable surface finish, while maintaining tolerance stability over multiple indexings. For production settings where repeatability matters, these geometric features translate into fewer rework cycles and a steadier quality output. Practical integration into tooling systems With its standard designation and compact dimensions, this insert fits established milling holders for efficient replacement and set-up. The combination of size code 16, thickness 06 and the ADMT160625R-F56 geometry enables machining strategies that balance material removal rate and tool life. For machining centres seeking a straightforward upgrade, the insert offers a pragmatic route to increased throughput with limited process alteration. If additional technical data are required for toolholder selection or cutting parameter optimisation, Metav Werkzeuge’s consultants are available to provide targeted recommendations. Order the Walter Tools Tiger‑tec Gold ADMT160625R-F56 WKP35G via Metav Werkzeuge for reliable, high-productivity milling — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: ADMT160625R-F56-WKP35G-WALTER Article designation: ADMT160625R-F56 WKP35G Product type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Plate size: 16 Plate thickness: 06 Corner radius: 2.5 mm Clearance angle: 15° Plate form: Parallelogram 85° Tolerance class: M Special features Grade: WKP35G (coated cemented carbide) Chipbreaker: F56 Material groups: Steel (P), Cast iron (K) Execution: T Suitable applications: productive milling, roughing and semi-finishing FAQ Which materials is this insert designed for? The ADMT160625R-F56 WKP35G insert from Walter Tools is intended for machining steel (P) and cast iron (K) as specified by its WKP35G grade and Tiger‑tec Gold coating. How does the Tiger‑tec Gold coating benefit performance? The Tiger‑tec Gold coating on the WKP35G grade increases wear resistance and promotes stable chip formation, extending insert life and improving productivity in industrial milling. What does the F56 chipbreaker provide? The F56 chipbreaker offers reliable chip control across a range of cutting conditions, reducing chip entanglement and supporting consistent surface quality during milling. What are the key geometry parameters to consider for toolholder selection? Consider the parallelogram 85° plate form, 15° clearance angle, plate size 16 and thickness 06 when selecting a compatible milling holder for predictable seating and rigidity. Protected trademarks and trade names belong to their respective owners. Brand names and protected designations are used for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
ADMT160625R-F56 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for durable, productive machining; the parallelogram 85° geometry and 2.5 mm corner radius deliver stable cutting and reliable edge life. Order the insert directly via Metav Werkzeuge or ask the technical consultants for application advice. ADMT160625R-F56 WKP35S milling insert (Parallelogram 85°, 2.5 mm radius) – Walter Tools An ADMT160625R-F56 WKP35S is a coated carbide milling insert designed for versatile steel and cast iron machining in demanding production environments. Tiger·tec Silver coating for wear resistance Suitable for steel and cast iron Parallelogram 85° geometry for stable cutting 2.5 mm corner radius for robust edge Consistent performance for steel and cast iron The WKP35S grade, realised within the Tiger·tec Silver series, is a coated carbide solution optimised for the machining of steel (P) and cast iron (K) according to ISO groupings. The combination of substrate and multilayer coating improves wear resistance and maintains a stable cutting edge under thermal and mechanical load. For production runs where repeatable surface finish and predictable tool life matter, this configuration reduces the frequency of tool changes and supports steady cycle times while preserving component quality. Geometry engineered for stable, predictable cutting The parallelogram 85° profile, paired with a 15° relief angle and a 2.5 mm corner radius, is designed to absorb cutting forces and minimise vibration during milling. The F56 chipbreaker directs chip flow and promotes controlled chip segmentation when machining both short- and medium-chip-forming materials. These geometric choices result in improved process stability, reduced tool chatter and a consistent cutting behaviour that facilitates reproducible parts and easier process qualification. Productivity gains and predictable tool life By combining a wear-resistant coating with a grade tuned for typical steel and cast iron chips, this insert supports higher productivity and lower overall tooling costs through extended life and fewer interruptions. The WKP35S grade is particularly aimed at shops seeking consistent performance across batch sizes; its balanced properties enable conservative feeds for excellent finishes or more aggressive parameters where productivity is required. The durable edge and optimised chip control also contribute to reduced machine downtime and more predictable maintenance intervals. For robust, repeatable milling performance choose the Walter Tools ADMT160625R-F56 WKP35S through Metav Werkzeuge — contact Metav Werkzeuge for procurement and application details at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: ADMT160625R-F56-WKP35S-WALTER Product designation: ADMT160625R-F56 WKP35S Product type: milling insert (indexable) Manufacturer: Walter Tools Material designation: P / K Facts Size: 16 mm Corner radius: 2.5 mm Relief angle: 15° Thickness code: 06 Form: Parallelogram 85° Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: F56 Execution: T Suitable for: steel (P), cast iron (K) Applicable material groups: steel and cast iron FAQ Which materials is this insert intended for? The ADMT160625R-F56 WKP35S is made for machining steel and cast iron (ISO groups P and K), offering a balance between wear resistance and chip control for both material families. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP35S grade increases resistance to abrasive and adhesive wear, extending edge life and improving process stability under typical steel and cast iron cutting conditions. How does the F56 chipbreaker affect machining? The F56 chipbreaker shapes and breaks chips to improve evacuation and reduce recutting; this results in more consistent surface finishes and lower risk of chip-related interruptions. Why is the parallelogram 85° shape beneficial? The 85° parallelogram geometry optimises the approach angle for stable cutting forces and improved tool support, which helps reduce vibration and maintain dimensional accuracy in serial production. Is the 2.5 mm corner radius suitable for heavy cuts? A 2.5 mm corner radius provides a robust cutting edge that tolerates higher mechanical loads and increases resistance to edge chipping, making it well suited to more demanding machining tasks. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes; there is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer (Walter Tools).
ADMT160625R-F56 WSM35G T Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, a stable cutting edge and optimised chip control to secure consistent production when machining stainless steels and heat‑resistant alloys. Order directly via Metav Werkzeuge or request technical consultation from our specialists. ADMT160625R-F56 WSM35G milling insert, Tiger·tec Gold, Walter Tools — for stainless steels and superalloys ADMT160625R-F56 WSM35G is a Tiger·tec Gold milling insert designed for demanding machining of stainless steels and heat‑resistant superalloys, offering a balance of wear resistance and edge stability in tough applications. Tiger·tec Gold coating for long tool life Stable cutting edge for heavy‑duty machining Optimised chipbreaker F56 for controlled chips Suitable for stainless steels and superalloys High wear resistance and thermal stability for tough materials The ADMT160625R‑F56 WSM35G insert is built around the Tiger·tec Gold coating and a dedicated substrate that together increase resistance to thermal and abrasive wear. This combination improves process reliability when tackling demanding materials: stainless steels (ISO group M) and heat‑resistant superalloys and titanium alloys (ISO group S). The enhanced surface finish and predictable wear curve reduce unplanned tool changes; the built‑in balance of hardness and toughness supports longer cutting cycles and more consistent component quality. Consistent chip control and secure cutting geometry Chip management is central to stable metalcutting. The chipbreaker F56 has been optimised to produce short, controllable chips under heavy engagement, lowering the risk of chip re‑cutting and improving coolant access. The insert’s parallelogram 85° form and 2.5 mm corner radius provide a compromise between robust edge strength and good surface finish, while the 15° clearance helps reduce rubbing and heat generation. These geometric choices translate into fewer secondary operations and higher first‑pass accuracy. Easy integration into productive tool systems As an indexable insert with thickness code 06 and standard fitment, this grade slides into established milling holders with minimal setup. The manufacturing tolerances (class M) and repeatable edge geometry facilitate quick index changes and predictable tool life planning. Combined with Walter Tools’ series characteristics, this insert supports continuous production environments where uptime, reproducibility and process security are priorities — ideal for shops machining corrosion‑resistant components or high‑temperature alloys. For process‑critical machining of stainless steels and superalloys, contact Metav Werkzeuge for tailored advice and to secure the Walter Tools ADMT160625R‑F56 WSM35G inserts — eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930 Technical data Article number: ADMT160625R-F56-WSM35G-WALTER Product designation: ADMT160625R-F56 WSM35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte / milling insert Series: Tiger‑tec Gold Facts Corner radius: 2.5 mm Relief / clearance angle: 15° Insert size: 16 Thickness code: 06 Tolerance class: M Special features Grade / sort: WSM35G Chipbreaker: F56 Form: Parallelogram 85° Execution: T Material suitability: S / M (superalloys/titanium and stainless steels) FAQ What materials is this insert designed for? The WSM35G grade is intended for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S); the Tiger·tec Gold technology supports secure chip formation and edge stability under high temperatures. How does the chipbreaker influence performance? The chipbreaker F56 is tuned for controlled, short chips during heavy engagement, improving coolant penetration and reducing the likelihood of chip entanglement in milling operations with the ADMT160625R‑F56 insert. Is the geometry suitable for roughing or finishing? The insert’s 2.5 mm corner radius and parallelogram 85° shape offer a robust cutting edge for heavier passes while still delivering acceptable surface quality; specific holder choice and cutting parameters determine final suitability for roughing or finish passes. What mounting and fitment details are relevant? The insert uses standard indexable insert fitment with thickness code 06 and tolerance class M; the 15° clearance aids in preventing rubbing and supports reliable seating in compatible milling holders. What advantages does Tiger·tec Gold provide in practice? Tiger·tec Gold coating on WSM35G increases wear resistance and maintains edge integrity at elevated temperatures, leading to longer tool life and more consistent component dimensions under demanding machining conditions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any affiliation. There is no connection between our company and the named brands. The item offered is an original, factory‑new product of Walter Tools.
ADMT160625R-F56 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the PVD-backed Tiger·tec Gold grade and the robust F56 chipbreaker for consistent chip control and extended tool life; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. ADMT160625R-F56 WSP45G milling insert – Parallelogram 85°, R=2.5 mm | Walter Tools The ADMT160625R-F56 WSP45G is a PVD-coated Tiger·tec Gold milling insert designed for reliable peripheral and face milling in a wide range of materials, especially suited to operations demanding stable cutting edges and predictable chip flow Tiger·tec Gold PVD-coated carbide Versatile for Stahl, rostfreier Stahl and superalloys Parallelogram 85° form with 2.5 mm radius 15° clearance angle and robust F56 chipbreaker Consistent wear resistance from advanced coating technology The Tiger·tec Gold grade, realised in the WSP45G composition, provides a PVD-protected carbide substrate that prioritises abrasion resistance and edge stability. The resulting combination reduces flank wear under cyclic loads and supports longer tool life, which directly lowers tool-change frequency and unplanned downtime. For machining operations that alternate between finishing and semi-finishing passes, the coating contributes to repeatable surface quality and predictable regrinding intervals, enabling planned maintenance windows and improved production planning. Geometry engineered for secure cutting and reliable chip control A parallelogram 85° form with a 2.5 mm corner radius and a 15° clearance angle gives the insert mechanical robustness and favourable cutting-vector orientation. The integrated F56 chip control geometry guides chips away from the cutting zone and reduces the risk of built-up edge on demanding passes. The net effect is a steady cutting process with lower vibration and more uniform force transmission into the toolholder, supporting higher feed stability and reducing the likelihood of surface defects. Broad applicability across demanding workpiece materials The grade is specially tuned for the ISO groups P / M / S, making it suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys (including titanium alloys where indicated). The formulation supports secure chip formation in sticky or tough materials and helps manage the thermal load at the cutting edge. Where material behaviour tends to cause smearing or adhesions, the insert’s coating and chipbreaker combination enhance process security and help maintain consistent dimensional accuracy throughout a tool life cycle. Process benefits that improve productivity and reproducibility The insert combines coating performance and stable cutting geometry to deliver measurable production advantages: extended wear intervals, predictable edge condition and consistent surface finish. The ADMT160625R-F56 WSP45G insert supports efficient cycle planning and reduces process variability, which in turn improves first-pass yields and lowers overall machining cost per component. For operations where repeatability and uptime matter, this insert offers the technical basis for reproducible results and economic machining across small and large batch sizes. For Tiger·tec Gold performance and application advice, contact Metav Werkzeuge for procurement and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: ADMT160625R-F56-WSP45G-WALTER Product label: Fräswendeschneidplatte ADMT160625R-F56 WSP45G Walter Tools Grade: WSP45G Series: Tiger·tec Gold Manufacturer: Walter Tools Dimensions & geometry Size code: 16 Thickness code: 06 Corner radius: 2.5 mm Clearance angle: 15° Form: Parallelogram 85° Materials & features Coating: Tiger·tec Gold (PVD) Substrate: Coated carbide Chipbreaker: F56 Applicable materials: P (Stahl); M (rostfreier Stahl); S (superalloys / titanium) Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The ADMT160625R-F56 WSP45G insert is designed for ISO groups P, M and S, meaning it is suitable for Stahl, rostfreier Stahl and heat-resistant superalloys including demanding titanium alloys where appropriate. How does the F56 chipbreaker improve machining? The F56 chipbreaker on the insert promotes controlled chip formation and evacuation, which reduces the risk of built-up edge and aids consistent surface finish when machining with the Tiger·tec Gold-coated grade. Which cutting applications benefit most from this insert? Peripheral and face milling operations that require a stable cutting edge and reproducible results benefit most; the insert’s geometry and coating are optimised for finishing and semi-finishing passes under varying load conditions. Is the insert compatible with standard toolholders for the ADMT geometry? Yes, the ADMT geometry conforms to common toolholder interfaces for parallelogram-style milling inserts; ensure the seat and clamping arrangement match the ADMT160625R-F56 designation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com