Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
BCMT090304L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of a heat-resistant Tiger‑tec Gold PVD grade and a stabilising G55 chipbreaker for reliable chip control and longer tool life; the robust 0.4 mm corner radius and 7° relief angle support consistent surface quality and process security. Order the insert directly via Metav Werkzeuge or contact our consultants for application guidance. BCMT090304L-G55 BCMT090304L-G55 WSP45G milling indexable insert — Tiger‑tec Gold for P/M/S milling by Walter Tools The BCMT090304L-G55 WSP45G is a milling indexable insert engineered for versatile machining of steel, stainless steel and heat-resistant superalloys, optimised for stable chip formation and extended tool life Tiger‑tec Gold PVD coating for high process security Suitable for Steel, stainless steel and superalloys Parallelogram 75° form with 7° relief angle Corner radius 0.4 mm and G55 chipbreaker Consistent chip control for uninterrupted production The combination of the G55 chipbreaker and the Tiger‑tec Gold PVD technology gives predictable chip formation under varying cutting conditions. This means fewer interruptions for chip clearing, reduced risk of built-up edge and a steadier material flow during milling. The insert’s geometry supports controlled fragmentation and evacuation of chips when machining steels and heat-resistant alloys, so the manufacturing process remains efficient and downtimes are minimised. Edge stability and thermal resistance for demanding materials A PVD-coated carbide grade designed for durability provides improved thermal resistance and a stable cutting edge when facing the high temperatures typical of stainless steels and superalloys. The 0.4 mm corner radius enhances edge strength and improves surface finish, while the 7° relief angle reduces rubbing and heat build-up at the flank. The parallelogram 75° form supports favourable approach angles for face and shoulder milling, delivering repeatable results in series production. Practical integration for economical milling solutions Identified by the ISO designation BCMT090304L-G55 WSP45G and manufactured by Walter Tools, this insert fits standard toolholders for the BCMT size class and is classified with tolerance M, ensuring consistent interchangeability. The material suitability marked as P / M / S covers a broad workshop spectrum, from general steel to titanium and nickel‑base alloys, enabling one grade to serve multiple applications. The result is simplified tooling logistics and a favourable cost-benefit ratio for batch and continuous milling operations. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger‑tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: BCMT090304L-G55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT090304L-G55 WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Core specifications Relief angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: 03 Tolerance class: M Design & application Parallelogram 75° form Chipbreaker: G55 Applicable materials: P / M / S Material grade: PVD-coated carbide (Tiger·tec Gold) Execution: T FAQ Which materials is this insert suitable for? The BCMT090304L-G55 WSP45G insert from Walter Tools is specified for ISO groups P, M and S — encompassing unalloyed and alloyed steels, stainless steels and heat‑resistant superalloys/titanium. What advantage does the G55 chipbreaker provide? The G55 chipbreaker offers controlled chip shaping for secure evacuation and reduced risk of built‑up edge when milling across the supported material groups, improving process stability. How does the Tiger‑tec Gold coating affect performance? The Tiger‑tec Gold PVD coating increases thermal resistance and edge life, allowing the insert to maintain cutting performance under elevated temperatures and abrasive conditions. Which cutter geometries work best with this insert? The parallelogram 75° form suits face and shoulder milling operations and is compatible with standard toolholders designed for the BCMT insert family. What does tolerance class M mean for production? Tolerance class M indicates a medium tolerance standard for dimensional accuracy and is suitable for industrial applications where reliable interchangeability and consistent repeatability are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT090304R-F55 WAK15 Wendeplatten - Walter Tools
Benefit from precise aluminium machining with the combination of the sharp WAK15 uncoated carbide grade and the F55 chipbreaker, delivering secure chip control and consistent surface quality; order the item directly via Metav Werkzeuge or contact the consultants for tailored advice. BCMT090304R-F55 WAK15 – milling indexable insert by Walter Tools (uncoated carbide, F55 chipbreaker) The BCMT090304R-F55 WAK15 is a milling indexable insert optimised for high‑quality machining of aluminium and other non‑ferrous metals, combining a sharp cutting geometry with the Walter N‑grade performance. Uncoated carbide WAK15 for aluminium and non‑ferrous F55 chipbreaker for secure chip control Parallelogram 75° shape for versatile milling 7° clearance with 0.4 mm corner radius Faster, cleaner aluminium milling through sharp grade and chip control The combination of the WAK15 uncoated carbide grade and the F55 chipbreaker is engineered to reduce material adhesion and promote consistent chip formation when machining aluminium and similar alloys. A very sharp cutting edge and a low‑friction geometry minimise built‑up edge, which in turn helps to maintain dimensional accuracy and surface finish during extended runs. For shops focusing on non‑ferrous production, this insert supports predictable behaviour at moderate cutting speeds and promotes efficient removal of swarf without unnecessary rework. Reliable process stability from geometry and dimensions Thanks to the 75° parallelogram shape and 7° clearance, the insert gives a controlled approach angle that balances cutting force and edge strength. The 0.4 mm corner radius provides adequate edge robustness for fine contouring while keeping the surface quality high. With size 09 and thickness 03 the component is suitable for many standard milling pockets and toolholders, offering reproducible seating and runout behaviour. This geometry combination helps to maintain consistent results across batches, supporting stable production and lower scrap rates. Practical application tips and material compatibility Designed within the Walter N‑grade family, the insert is targeted specifically at aluminium and non‑ferrous metals, where sharp edges and optimised chip control are decisive. The uncoated cemented carbide composition reduces the tendency for material sticking that sometimes occurs with softer non‑ferrous alloys. For best outcomes, adopt machining strategies that favour steady chip evacuation and avoid prolonged rubbing; the Walter N‑grade concept focuses on wide material coverage and efficient swarf formation to support productive milling campaigns. Contact Metav Werkzeuge for cutting data sheets, availability and tailored application recommendations for Walter Tools inserts and the BCMT090304R-F55 WAK15 SKU Technical Data Article number: BCMT090304R-F55-WAK15-WALTER Designation: BCMT090304R-F55 WAK15 Type: Milling indexable insert Manufacturer: Walter Tools Core dimensions Size: 09 Thickness: 03 Relief/clearance angle: 7° Corner radius: 0.4 mm Shape: Parallelogram 75° Chipbreaker: F55 Tolerance class: M Special features Walter N‑grade system Uncoated cemented carbide (WAK15) Suitable for aluminium and non‑ferrous metals Secure chip control with F55 chipbreaker FAQ Is this insert suitable for machining aluminium alloys? The BCMT090304R-F55 WAK15 insert is specifically formulated for aluminium and other non‑ferrous metals, using the Walter N‑grade geometry to reduce material adhesion. What does the F55 chipbreaker deliver in practice? The F55 chipbreaker on this Walter Tools milling insert promotes consistent chip formation and secure evacuation, improving surface quality during continuous milling of non‑ferrous materials. Which toolholder geometries are compatible with this insert? The parallelogram 75° format and size 09 designation mean the insert fits standard milling pockets designed for this ISO style; final compatibility depends on the specific cutter body used. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius balances edge strength and finish quality, offering improved durability over micro‑radii while still delivering good surface results in finishing and light‑interrupted cuts. Walter Tools is a registered brand of Walter AG. Protected trademarks and trade names are the property of their respective owners. Mention of brand names is for explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the named manufacturers. The offered article is original and factory‑new.
BCMT090304R-F55 WKK25G WKK25G Wendeplatten - Walter Tools
Combining the high wear resistance of the Tiger‑tec Gold grade with a precise 0.4 mm corner radius and the versatile parallelogram 75° form delivers consistent chip control and long tool life; order the BCMT090304R‑F55 WKK25G directly via Metav Werkzeuge or consult our specialists for application advice. BCMT090304R‑F55 WKK25G — Milling insert with Tiger·tec Gold coating, optimised for cast iron (Walter Tools) A BCMT090304R‑F55 WKK25G milling insert designed for efficient, high‑productivity machining of cast iron components in industrial milling applications Tiger·tec Gold coated carbide grade Optimised for cast iron machining Parallelogram 75° form for versatile use 0.4 mm corner radius for consistent accuracy Efficient machining with optimised grade and coating The Tiger·tec Gold WKK25G grade combines a coated carbide substrate with a finish treatment that reduces abrasive wear during cast iron operations. This insert delivers predictable cutting performance and extended tool life, which contributes to lower tool costs per part and fewer re‑stocks. The integrated F55 chipbreaker is configured to handle the characteristic short, breaking chips of cast materials, improving evacuation and reducing the risk of recutting. These technical choices translate into measurable process gains on shopfloor milling operations. Geometry designed for repeatable accuracy and accessibility The insert’s parallelogram 75° form and 7° relief angle provide a stable cutting edge orientation suitable for a range of face and shoulder milling tasks. A 0.4 mm corner radius supports fine finish quality while maintaining edge strength for interrupted cuts typical in cast iron workpieces. The designation BCMT090304R‑F55 indicates the insert’s size and geometry in established ISO notation, facilitating straightforward tool selection and programme documentation in production environments. Fewer interruptions, smoother integration into workflows Adopting this insert reduces machine downtime through predictable wear and consistent chip control, supporting faster cycle times and easier automation. The combination of grade, coating and chipbreaker design reduces the need for frequent edge changes, while the standardised form factor simplifies tooling holders and inventory management. For operations aiming to increase throughput without compromising surface quality, this insert offers a practical balance between performance and tool‑handling convenience. Durability, process security and manufacturer backing Designed for abrasive cast iron machining, the grade provides stable chip formation and reliable edge behaviour even under tough cutting conditions. Built by a recognised brand, this solution emphasises process security and repeatable results, helping maintain consistent component tolerances and surface integrity across production batches. The engineering behind this insert supports long‑term productivity gains and predictable maintenance intervals. Contact Metav Werkzeuge today to discuss how the Tiger·tec Gold BCMT090304R‑F55 WKK25G milling insert can improve cast‑iron milling performance and to arrange rapid supply from Metav Werkzeuge Technical Data Article number: BCMT090304R-F55-WKK25G-WALTER Designation: BCMT090304R-F55 WKK25G Base designation: BCMT090304R-F55 Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Size: 09 Thickness: 03 (3.00 mm) Corner radius: 0.4 mm Relief angle: 7° Form: Parallelogram 75° Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKK25G Chipbreaker: F55 Coated carbide Suitable for cast iron machining FAQ What materials is this insert suitable for? The BCMT090304R‑F55 WKK25G is optimised for cast iron machining and its grade and chipbreaker are tuned for abrasive wear and short, breaking chips. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold treatment enhances wear resistance and thermal stability, extending effective cutting time for the WKK25G grade under cast iron cutting conditions. Is the BCMT090304R‑F55 compatible with standard holders? Yes — the BCMT090304R‑F55 follows conventional ISO geometry, enabling use with broadly available milling cutter bodies that accept this insert shape and size. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius offers a balance between edge strength and finish quality, producing consistent surfaces in face and shoulder milling while tolerating typical interruptions in cast iron work. Can this insert handle interrupted cuts in cast iron? The WKK25G grade and the robust chip control of the F55 breaker deliver stable performance in interrupted cuts, reducing the risk of premature edge failure. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only and do not indicate any affiliation between Metav Werkzeuge and the trademark holders. The offered article is an original, brand‑new product of the manufacturer. Walter Tools is a trademark of Walter Deutschland GmbH.
BCMT090304R-F55 WKP25S Wendeplatten - Walter Tools
Take advantage of Tiger‑tec Silver surface technology and the WKP25S grade to achieve longer tool life and consistent chip control in mixed steel and cast iron production. The combination of a F55 chipbreaker and a parallelogram 75° geometry supports stable cutting performance and reduced downtime. Order the insert directly via Metav Werkzeuge or consult the sales team for application-specific guidance. BCMT090304R-F55 WKP25S milling indexable insert for steel and cast iron, Walter Tools — Tiger‑tec Silver, F55 chipbreaker BCMT090304R-F55 WKP25S is a milling indexable insert designed for precision machining of steel and cast iron with robust chip control and long tool life Tiger‑tec Silver coating for extended tool life WKP25S grade for steel and cast iron machining Parallelogram 75° shape for stable cutting geometry F55 chipbreaker for controlled chip formation Extended lifetime through advanced coating and grade The Tiger‑tec Silver coating combined with the WKP25S carbide grade provides a measurable improvement in wear resistance and thermal stability. This means longer cutting intervals and fewer index changes during series production, which directly supports higher machine utilisation. Coated cemented carbide resists abrasive wear typical of cast iron and handles the heat and built-up edge tendencies associated with machining many steels. In practice, this translates to a more economical process and predictable tool life, especially in mixed-production environments where both steel and cast iron operations occur. Geometry and chip control for reliable process stability The insert’s parallelogram 75° form and dedicated F55 chipbreaker are engineered to produce short, consistent chips and to maintain a secure cutting edge under varying feed conditions. A 7° clearance angle and a 0.4 mm corner radius reduce cutting forces and provide stability when shoulder milling or entering/exiting cuts. These geometric choices improve surface finish and dimensional consistency, which is particularly valuable for downstream assembly or finishing operations. For workshops seeking repeatable results, the combination of shape and chipbreaker helps to avoid unexpected interruptions and contributes to smoother production runs. Versatile application focus for steel and cast iron Certified for workpiece groups P (steel) and K (cast iron), the insert is optimised for the typical chip behaviour and wear mechanisms of these materials. The coated carbide base is tuned to balance toughness and hardness, offering good performance across unalloyed and alloyed steels as well as a range of cast irons. For contractors and job shops that run mixed batches or frequent job changes, this insert offers the flexibility to reduce tool inventories while maintaining quality. Technical advice and process parameters can be provided to adapt cutting data to specific machine and material combinations. Discuss Walter Tools Tiger‑tec Silver inserts with Metav Werkzeuge to determine the optimal grade and geometry for the intended production task, and secure tailored recommendations for cutting parameters and tool management Technical Data Article number: BCMT090304R-F55-WKP25S-WALTER Article designation: BCMT090304R-F55 WKP25S Manufacturer: Walter Tools Facts Size: 09 Thickness: 3 mm Corner radius: 0.4 mm Clearance angle: 7° Tolerance class: M Chipbreaker: F55 Special features Series: Tiger‑tec Silver Grade: WKP25S Coated cemented carbide Material groups: P (steel) / K (cast iron) Plate form: Parallelogram 75° Execution: T FAQ What materials is this insert suitable for? The BCMT090304R-F55 WKP25S insert from Walter Tools is specified for workpiece groups P (steel) and K (cast iron), offering reliable performance across unalloyed and alloyed steels as well as various cast irons. How does the Tiger‑tec Silver treatment benefit machining? Tiger‑tec Silver on the WKP25S grade enhances thermal resistance and wear control on the Walter Tools milling insert, extending cutting intervals and improving process stability in demanding operations. Which chip behaviour can be expected with the F55 chipbreaker? The F55 chipbreaker on this insert produces short, manageable chips and promotes consistent chip formation, improving both safety and surface finish during milling of steel and cast iron. Is the geometry suitable for shoulder milling and finishing passes? Yes—the parallelogram 75° form with a 7° clearance angle and a 0.4 mm corner radius provides stable cutting geometry suited to shoulder milling and finishing, helping to maintain dimensional accuracy. Can the BCMT090304R-F55-WKP25S-WALTER be used on high-feed operations? The combination of grade, coating and chipbreaker gives the insert robustness for many heavy and medium-duty milling tasks; final parameters should be adjusted to machine rigidity and workpiece specifics for optimal results. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT090304R-F55 WKP35G Wendeplatten - Walter Tools
Take advantage of the high productivity and reliable edge stability of the Tiger·tec Gold grade combined with precise geometry for consistent surface finish and efficient chip control; order directly via Metav Werkzeuge for fast availability or contact our team for tailored cutting data and application advice. BCMT090304R-F55 WKP35G milling indexable insert, Tiger·tec Gold coating, Walter Tools The BCMT090304R-F55 WKP35G is a parallelogram 75° milling insert designed for productive machining of steel and cast iron, offering a coated carbide grade optimised for stable chip formation in general finishing and medium cutting operations. Tiger·tec Gold coating for extended tool life Optimised F55 chipbreaker for reliable chip control Parallelogram 75° geometry for high rigidity and support Suited for machining steel and cast iron Maximise productivity with a wear‑resistant grade The combination of the WKP35G grade and Tiger·tec Gold coating provides a robust, coated carbide solution that is developed for sustained cutting performance when machining steel and cast iron. The grade addresses the typical heat and abrasion found in these material groups, resulting in stable chip formation and longer intervals between index changes. For production environments aiming to reduce downtime and increase throughput, this insert offers a tangible efficiency advantage through improved edge life and consistent cutting behaviour. Geometry that delivers consistent surface quality The insert’s parallelogram 75° geometry and the specified 7° relief angle combine to deliver increased cutting edge support and predictable engagement with the workpiece. The 0.4 mm corner radius helps achieve a balance between a refined surface finish and corner strength, while the F55 chipbreaker ensures controlled chip formation and evacuation under varying cutting conditions. These geometric choices reduce chatter and contribute to repeatable results when a dependable surface quality is required across serial production. Application range and economic benefits in daily use Designed for the ISO groups P and K, the insert covers a broad scope of applications in turning operations involving steel and cast iron components. The grade’s wear resistance and the insert’s chip control capabilities lower overall tooling costs by extending the effective life of each index and by reducing scrap from poor chip behaviour. When paired with suitable cutting parameters and a stable toolholder, users can expect better process security and more consistent part tolerances—factors that support predictable production schedules and improved cost-efficiency. For tailored cutting recommendations or to secure stock of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for precise application advice and prompt order processing. Technical Data Article number: BCMT090304R-F55-WKP35G-WALTER Article designation: BCMT090304R-F55 ISO designation: BCMT090304R-F55 WKP35G Series: Tiger-tec Gold Grade: WKP35G Facts Relief angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: 03 Plate form: Parallelogram 75° Chipbreaker: F55 Tolerance class: M Special features Coated carbide grade Suited for steel and cast iron (ISO P and K) Stable chip formation and good wear resistance Designed for medium finishing and general-purpose milling Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The BCMT090304R-F55 WKP35G insert is designed for machining steel and cast iron (ISO groups P and K), with a grade tuned for the thermal and abrasive demands of these materials. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating enhances wear resistance and thermal stability, which improves tool life and supports consistent cutting performance under production conditions. What role does the F55 chipbreaker play? The F55 chipbreaker controls chip shape and evacuation, reducing the risk of entanglement and promoting stable cutting forces for improved surface finish and tool life. Which geometry features support rigidity? The parallelogram 75° shape together with the 7° relief angle increases insert support in the toolholder, which helps to reduce vibration and maintain a stable cutting edge. Is this insert suitable for finishing and semi-finish operations? Yes. The combination of 0.4 mm corner radius and coated carbide grade makes it appropriate for finishing and semi-finishing where both surface quality and edge durability are required. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names remain the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the mentioned brands. The item offered is original, factory-new merchandise from the manufacturer.
BCMT090304R-F55 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of a coated carbide grade and a proven chipbreaker geometry to increase throughput and reduce index changes; the combination of Tiger·tec Gold performance and the F55 chip control delivers efficient, repeatable results for steel machining. Order the insert via Metav Werkzeuge or consult their specialists for application-specific recommendations. BCMT090304R-F55 WPP35G — Fräswendeschneidplatte (Tiger·tec Gold) by Walter Tools The BCMT090304R-F55 WPP35G is a coated carbide milling insert designed for efficient steel machining, offering a robust chipbreaker and a parallelogram 75° form for versatile face and shoulder milling. Tiger·tec Gold coating for extended tool life F55 chipbreaker for controlled swarf evacuation Parallelogram 75° form for flexible milling Reliable performance for high-volume steel operations The BCMT090304R-F55 WPP35G grade combines a coated carbide substrate with the Tiger·tec Gold coating technology to address the typical heat and chip-formation challenges encountered when machining steel (ISO P). The coating improves resistance to abrasive and adhesive wear, which directly contributes to longer intervals between index changes and fewer unplanned stops. This results in measurable productivity gains on both single- and multi-pass operations. The specification targets users who require predictable tool life and consistent component quality across extended production runs. Improved cycle times through optimised chip control The dedicated F55 chipbreaker is engineered to produce short, manageable chips under a range of cutting conditions, reducing the risk of re-cutting or entanglement. Combined with the parallelogram 75° insert form, the geometry supports stable cutting forces and enables secure seat contact in typical milling toolholders. For workshops seeking to reduce cycle time variability, the controlled chip flow contributes to smoother surface finishes and lower spindle load fluctuations, which in turn supports higher average feed rates without compromising process security. Precision geometry for repeatable component quality A 0.4 mm nose radius and tolerance class M ensure a balance between edge strength and dimensional consistency. The insert’s geometry allows for reliable corner transitions and predictable scallop heights, which benefits finishing passes and tight-tolerance features. For production engineers, this means fewer adjustments to machining programmes and reduced inspection overhead. The insert’s design is tuned to maintain a stable cutting edge under common steel cutting regimes, supporting consistent batch-to-batch quality. Practical selection and process advantages for everyday milling The Tiger·tec Gold WPP35G grade is positioned as a versatile solution for a broad range of steel types, providing a compromise between wear resistance and toughness suited to both general-purpose and demanding applications. The insert’s format (size 09, thickness 03) offers compatibility with many standard cutters while the F55 chipbreaker and 75° form reduce the need for numerous specialised inserts. For operations focused on cost-per-component and uptime, the grade supports predictable tool consumption and straightforward inventory management, while the proven geometry reduces trial-and-error during process setup. Contact Metav Werkzeuge for tailored cutting parameters, stock availability and application advice on Walter Tools inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BCMT090304R-F55-WPP35G-WALTER Designation: BCMT090304R-F55 WPP35G Manufacturer: Walter Tools Core Data Grade series: Tiger·tec Gold Cutting grade: WPP35G Rake angle: 7° Nose radius: 0.4 mm Insert form: Parallelogram 75° Size: 09 Thickness: 03 Materials & Features Coating: coated carbide (Tiger·tec Gold) Suitable for: Steel (ISO P) Chipbreaker: F55 Tolerance class: M Execution: T FAQ Is this insert suitable for stainless steels? The insert is specified for Steel (ISO P); stainless steel suitability is not indicated for the BCMT090304R-F55 WPP35G grade and would require a dedicated stainless grade. Which materials can be machined with this grade? This Tiger·tec Gold grade WPP35G is optimised for machining steel (ISO P), addressing typical heat generation and chip-formation characteristics for unalloyed and alloyed steels. What does the F55 chipbreaker achieve? The F55 chipbreaker produces controlled, short chips for reliable evacuation, helping to maintain stable cutting conditions and reducing the chance of chip-related interruptions when milling steels. How does the parallelogram 75° form benefit milling applications? The 75° parallelogram form offers flexibility for shoulder and face milling while ensuring secure seating in compatible toolholders, contributing to steady cutting forces and predictable tool behaviour. Which SKU and manufacturer reference should be used when ordering? Use SKU BCMT090304R-F55-WPP35G-WALTER and reference the Walter Tools designation BCMT090304R-F55 WPP35G when placing orders or requesting technical data. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
BCMT090304R-F55 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of a heat-resistant, coated carbide grade and an optimised chipbreaker to maintain productivity when machining demanding materials; order directly via Metav Werkzeuge or consult our specialists for cutting data and grade selection. BCMT090304R-F55 WSM45X milling insert for stainless steel and superalloys — Walter Tools BCMT090304R-F55 WSM45X is a coated carbide milling insert designed for heavy-duty machining of stainless steel (ISO group M) and heat-resistant superalloys (ISO group S) Coated carbide grade WSM45X Optimised F55 chipbreaker for stable chips Parallelogram 75° form for versatile engagement Suitable for stainless steel and superalloys Stable cutting performance for tough materials The WSM45X grade combines a wear-resistant, coated carbide substrate with a geometry tuned to reduce built-up edge and thermal loading when machining stainless steel and nickel-based alloys. In practice this means a more consistent surface finish and fewer interrupted cycles for reworking. The F55 chipbreaker promotes predictable chip formation, which reduces down-time caused by clogging and improves machine utilisation. As a result, productivity rises through fewer tool changes and more stable cutting conditions during challenging operations. Edge security and productivity gains A secure cutting edge is critical when working with materials that generate heat and strain the tool. The insert’s 0.4 mm corner radius and 7° clearance support a robust cutting edge that resists chipping under cyclic forces, giving longer in-process life and more reproducible component quality. The parallelogram 75° shape allows flexible approach angles on milling cutters, enabling process engineers to favour higher feed rates or improved engagement depending on the application. These characteristics translate to measurable efficiency improvements on serial production runs. Practical advantages for shop-floor integration Designed with standard dimensions and a common mounting geometry, the insert fits readily into many milling systems and cutter bodies, simplifying tool management and inventory. The plate size and 03 thickness deliver a balance between stiffness and cutting access, while the F55 groove reduces the need for secondary chip control measures. For planning and process sheets, the insert’s tolerance class M and clear ISO designation make it straightforward to specify in machining instructions and tooling lists. Application guidance and material suitability This insert is particularly suited to components made from stainless steel and heat-resistant superalloys where thermal stability and edge retention are priorities. When used with appropriate cutting parameters and coolant strategies, the grade supports stable chip formation and reduced edge deterioration. Process technicians will benefit from the combination of coated carbide wear resistance and the chipbreaker’s geometry, which together minimise the risk of built-up edge and assist in achieving consistent surface quality with fewer interventions. For tailored recommendations on cutting data, grade selection or to request detailed machining sheets for Walter Tools’ WSM45X inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our advisers provide precise specifications to match production needs Technical Data Article number: BCMT090304R-F55-WSM45X-WALTER Label: Fräswendeschneidplatte BCMT090304R-F55 WSM45X Walter Tools Manufacturer: Walter Tools Product type: Milling insert (indexable) Grade: WSM45X Series: Walter Schneidstoffsorte - Serie offen Facts Free angle: 7° Corner radius: 0.4 mm Plate form: Parallelogram 75° Plate size: 09 Plate thickness: 03 Chipbreaker: F55 Tolerance class: M Special features Coating: coated carbide (described by manufacturer) Material groups: S / M (superalloys/titanium and stainless steel) Execution: T Designation without grade: BCMT090304R-F55 ISO designation: BCMT090304R-F55 WSM45X FAQ What materials is this insert suited to machine? The BCMT090304R-F55 WSM45X milling insert is intended primarily for stainless steel (ISO group M) and heat-resistant superalloys (ISO group S), offering thermal stability and secure chip control for those materials. How does the F55 chipbreaker help on the shop floor? The F55 chipbreaker on this Walter Tools insert promotes consistent chip formation and reduces the likelihood of chip build-up, which in turn helps maintain stable cutting conditions and reduces interruptions during production. Can this insert be used at higher feed rates? Yes — thanks to the parallelogram 75° form and the robust edge geometry, the insert tolerates increased feed rates when cutters and parameters are matched to the component material and machine capability. What are the key geometry specifications to check when ordering? Check the designation BCMT090304R-F55 WSM45X for the correct 0.4 mm corner radius, 7° clearance, plate size 09, and plate thickness 03 to ensure compatibility with the intended cutter body. Is the insert suitable for finishing and semi-finishing operations? The combination of the WSM45X grade and the F55 chipbreaker offers a balance that can be applied both in semi-finishing and finishing, depending on cutting data and machine stability; adjust parameters to favour surface quality or metal removal rate as required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT090304R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating with the WSP45G grade and a controlled 7° relief delivers reliable edge stability and consistent chip control for productive milling of Stahl, rostfreier Stahl and high‑temperature alloys; order directly via Metav Werkzeuge or request specialist advice from our consultants. BCMT090304R-F55 WSP45G milling insert — Tiger‑tec Gold, 7° relief, Walter Tools A BCMT090304R-F55 WSP45G indexable milling insert engineered for general milling of Stahl, rostfreier Stahl and heat‑resistant alloys, optimised for reliable chip formation and long tool life Tiger‑tec Gold coating performance Suitable for Stahl, rostfreier Stahl and superalloys 7° relief angle for secure cutting Parallelogram 75° form with 0.4 mm corner High‑performance coating and grade for consistent productivity The combination of Tiger‑tec Gold surface technology with the WSP45G grade provides a wear‑resistant, PVD‑based finish that helps maintain a stable cutting edge under varying conditions. This grade is developed for milling operations where temperature management and reliable chip formation are essential, particularly when machining Stahl or rostfreier Stahl. The result is a repeatable machining process with fewer unplanned tool changes and improved component consistency, making the insert a rational choice for shops prioritising uptime and predictable throughput. Geometry that improves edge life and surface quality The insert’s parallelogram 75° form and 7° relief angle are matched to the chipbreaker F55 to reduce cutting forces and guide chips away from the cutting zone. The 0.4 mm corner radius balances edge strength and surface finish, aiding in dimensional control during shoulder and face milling operations. These geometric choices translate into smoother finishes and reduced risk of build‑up on the cutting edge, which in turn lowers rework rates and supports efficient downstream processes. Versatile application spectrum with clear economic benefits Specified for the material classes P / M / S, this grade covers a broad range from general Stahl to rostfreier Stahl and heat‑resistant superalloys and Titan, enabling a single insert type to serve multiple production tasks. The robust edge and coating combination extend tool life and support higher metal removal rates, contributing to a better cost‑per‑part metric. Where process stability and consistent surface quality are required, this insert helps to reduce cycle variability and supports leaner tool inventories. Contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com to discuss the BCMT090304R-F55 WSP45G insert and receive tailored application recommendations from our specialists Technical data Article number/SKU: BCMT090304R-F55-WSP45G-WALTER Designation: BCMT090304R-F55 Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Core data Size designation: 09 Thickness code: 03 Relief angle: 7° Corner radius: 0.4 mm Tolerance class: M Special features Coating: Tiger‑tec Gold (PVD coated cemented carbide) Chipbreaker: F55 Insert form: Parallelogram 75° Suitable materials: P / M / S (Stahl, rostfreier Stahl, superalloys & Titan) Execution: T FAQ What materials is this insert suitable for? This BCMT090304R‑F55 WSP45G insert is specified for P / M / S materials, covering typical Stahl, rostfreier Stahl and heat‑resistant superalloys and Titan. How does the Tiger‑tec Gold coating benefit milling operations? The Tiger‑tec Gold coating on the WSP45G grade increases wear resistance and helps preserve the cutting edge under the thermal and mechanical loads encountered during milling, improving tool life and process reliability. What is the purpose of the F55 chipbreaker? The F55 chipbreaker is designed to control chip formation and evacuation, reducing the risk of re‑cutting and supporting consistent surface finishes during face and shoulder milling. Can this insert be used for high‑speed milling? The combination of the WSP45G grade and Tiger‑tec Gold coating supports elevated cutting parameters where appropriate, offering good thermal resistance and stable edge performance for productive milling cycles. What geometry advantages does the parallelogram 75° form provide? The parallelogram 75° form improves accessibility in certain milling setups and, combined with the 7° relief, reduces cutting forces while promoting stable engagement and chip flow. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT090304R-G55 WAK15 Wendeplatten - Walter Tools
The combination of precise chip control and a purpose-designed carbide grade makes this insert a cost-effective choice for milling aluminium and other non‑ferrous materials; its G55 chipbreaker and 0.4 mm nose radius ensure consistent surface quality and reduced rework. Order direct via Metav Werkzeuge or consult the technical team for application-specific advice. BCMT090304R-G55 WAK15 milling insert (G55 chipbreaker, 0.4 mm nose radius) – Walter Tools The BCMT090304R-G55 WAK15 is a parallelogram 75° milling indexable insert developed for high‑efficiency machining of aluminium and non‑ferrous metals. WAK15 uncoated carbide for aluminium G55 chipbreaker for reliable chip control Parallelogram 75° geometry for stable cutting 0.4 mm nose radius with 7° clearance angle High-efficiency aluminium machining with consistent chip control This insert delivers a focused performance profile for machining soft, ductile materials. The uncoated carbide WAK15 is optimised for non‑ferrous alloys, providing a sharp cutting edge and thermal stability that reduce built‑up edge formation when facing and slotting aluminium. The G55 chipbreaker actively controls chip form and evacuation, which lowers the risk of surface marking and tool jamming. As a result, cycle times are shortened and scrap rates fall, offering a clear efficiency gain for production lines that handle high volumes of aluminium components. Geometry and cutting mechanics that improve process reliability The parallelogram 75° shape and a 0.4 mm nose radius combine to stabilise the cutting process and maintain tool engagement under variable feed conditions. A 7° clearance angle supports low friction at the flank face and reduces rubbing, so cutting forces remain predictable. These geometric choices increase repeatability from one part to the next and make toolpath planning more forgiving in mixed‑batch production. For shops seeking steady part finish without constant tool intervention, this configuration delivers measurable improvements in process security. Practical benefits for workshop integration and tooling strategy Integrating this insert into existing tool systems is straightforward: it follows established ISO designation practices and fits common insert holders that accept the BCMT form. The use of a dedicated grade for non‑ferrous metals reduces the need for special coatings or complicated machining parameters, simplifying tool inventory and reducing changeover time. The result is better uptime and a more economical tooling strategy, especially where frequent tool indexing and predictable surface quality are priorities. For tailored recommendations on applying Walter Tools WAK15 inserts in specific aluminium applications, contact Metav Werkzeuge for technical guidance and procurement at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: BCMT090304R-G55-WAK15-WALTER SKU: BCMT090304R-G55-WAK15-WALTER Product type: Fräswendeschneidplatte / milling insert Manufacturer: Walter Tools Series: Walter N‑Sortensystem Grade: WAK15 Form: Parallelogram 75° Chipbreaker: G55 Execution: T Designation: BCMT090304R-G55 WAK15 Facts Size: 09 Thickness: 03 Nose radius: 0.4 mm Clearance angle: 7° Tolerance class: M Special features Uncoated carbide grade WAK15 Optimised for aluminium and non‑ferrous metals Parallelogram 75° geometry for stable engagement G55 chipbreaker for controlled chips and evacuation Suited to common BCMT insert holders FAQ What materials is this insert intended for? The BCMT090304R‑G55 WAK15 insert by Walter Tools is intended for aluminium and other non‑ferrous metals, utilising the WAK15 uncoated carbide to reduce adhesion and improve edge life. Is the G55 chipbreaker suitable for high feed rates? Yes. The G55 chipbreaker on this insert is designed to maintain controlled chip formation at elevated feed rates typical in aluminium milling, improving process stability. How does the 0.4 mm nose radius affect surface finish? A 0.4 mm nose radius provides a balance between strength and surface finish: it supports moderate feed rates while helping to achieve a smooth skin pass without excessive burr formation on non‑ferrous parts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer. The brand Walter Tools is used where applicable.
BCMT090304R-G55 WKK25G Wendeplatten - Walter Tools
Efficient, wear-resistant performance on abrasive cast-iron workpieces and reliable chip control from the Tiger‑tec Gold grade ensure uninterrupted production cycles; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific guidance. BCMT090304R-G55 WKK25G milling insert, Tiger‑tec Gold, G55 chipbreaker — Walter Tools The BCMT090304R-G55 WKK25G is a Tiger‑tec Gold coated milling insert designed for productive machining of cast iron in a wide range of roughing and finishing operations. Tiger‑tec Gold coating for extended tool life Designed for cast iron (ISO group K) G55 chipbreaker for controlled chip formation Parallelogram 75° geometry, 0.4 mm nose radius Predictable chip control for consistent productivity The insert offers G55 chipbreaker technology tailored to the short, brittle chips typical of cast iron. Controlled chip formation reduces the risk of built‑up edge and improves process stability, which in turn lowers machine idle time and scrap rates. The chipbreaking geometry supports a wide range of feed rates while maintaining a consistent evacuation path, so machining cycles remain reliable even under varying cutting conditions. For production environments, this translates to fewer interruptions and more predictable throughput. Longer tool life through advanced coating technology Equipped with the Tiger‑tec Gold coating, the indexable insert combines a wear‑resistant surface with a robust substrate to withstand abrasive cast‑iron mixtures. The coating reduces abrasive wear and preserves the cutting edge, extending service intervals and reducing tooling consumption. In practice, this means fewer insert changes and lower tool‑related downtime, supporting higher overall equipment effectiveness (OEE) in demanding cast‑iron applications. The coated carbide grade is particularly effective where consistent edge retention is required. Geometry that enhances milling flexibility and accuracy The insert’s parallelogram 75° geometry and 0.4 mm nose radius provide a balance between edge strength and surface finish capability. The 75° approach allows for versatile tool paths and facilitates flexible tool engagement strategies across different operations, while the modest nose radius helps to achieve acceptable surface quality without compromising edge stability. With a 7° relief angle and tolerance class M, the component supports repeatable clamping and predictable positioning in standard toolholders, contributing to accurate, repeatable results. Application suitability and integration into production Marked as grade WKK25G, the insert is optimised specifically for the ISO group K (cast iron), offering a combination of wear resistance and toughness suitable for both roughing and semi‑finishing. The design and coating make the component a cost‑effective choice for series production where abrasive wear is the dominant wear mechanism. For integration, the designation BCMT090304R‑G55 provides the geometry and chipbreaker details needed to select compatible toolholders and programme stable cutting conditions. For machining parameter recommendations, consult technical documentation or Metav Werkzeuge’s advisory service for process‑specific optimisation. Contact Metav Werkzeuge today to discuss application requirements for the BCMT090304R‑G55 WKK25G milling insert and to arrange a tailored supply solution; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: BCMT090304R-G55-WKK25G-WALTER Designation: BCMT090304R‑G55 WKK25G Manufacturer: Walter Tools Series: Tiger‑tec Gold Key figures Shape: Parallelogram 75° Insert size: 09 Thickness: 03 (approx. 3 mm) Nose radius: 0.4 mm Relief angle: 7° Chipbreaker: G55 Tolerance class: M Execution: T Materials & features Grade: WKK25G (coated carbide) Primary application: Cast iron (ISO group K) Coating technology: Tiger‑tec Gold Product type: Milling indexable insert Material substrate: carbide FAQ What materials is this insert suited for? The BCMT090304R‑G55 WKK25G insert is optimised for cast iron (ISO group K); the WKK25G grade and Tiger‑tec Gold coating address abrasive wear and short, breaking chips. What does the G55 chipbreaker do? The G55 chipbreaker controls chip shape and evacuation for brittle cast‑iron chips, improving process stability and reducing the likelihood of built‑up edge during milling with the Walter Tools insert. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold enhances wear resistance and edge retention on the BCMT090304R‑G55, extending tool life and reducing insert changes in repetitive cast‑iron operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original factory‑new goods of the manufacturer.
BCMT090304R-G55 WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver surface technology and the G55 chipbreaker to boost machining stability and tool life in mixed steel and cast‑iron production. The combination of a parallelogram 75° geometry and a 0.4 mm corner radius delivers consistent surface quality and predictable wear behaviour. Order directly via Metav Werkzeuge or consult our specialists for cutting data and application advice. BCMT090304R-G55 WKP25S milling insert – Parallelogram 75°, Tiger‑tec Silver (Walter Tools) BCMT090304R-G55 WKP25S is a coated carbide milling insert designed for high‑productivity machining of steel and cast iron in CNC milling operations Tiger‑tec Silver coating for extended tool life Suitable for steel and cast iron machining Parallelogram 75° geometry for versatile milling 0.4 mm corner radius for accurate surface finish Increased productivity through advanced coating and grade The WKP25S grade, part of the Tiger‑tec Silver range, is a coated carbide formulation optimised for the thermal and abrasive conditions encountered when machining steel and cast iron. The advanced coating reduces flank and crater wear, which translates into longer tool life and fewer indexings. Stable chip formation and improved resistance to adhesive and abrasive wear allow higher cutting parameters without sacrificing reproducible component quality. This yields measurable productivity gains in series production and shorter overall machining cycles. Better chip control and process reliability with G55 Equipped with the G55 chipbreaker, the insert supports controlled chip segmentation across a range of depths of cut, reducing the risk of chip entanglement and tool damage. The chipbreaker geometry is particularly effective when turning shorter, brittle chips typical of cast‑iron and when managing the continuous chips from many steels. As a result, cycle times are reduced and tool change frequency drops, which benefits throughput and floor‑level process stability in demanding production environments. Geometry and tolerance for consistent surface quality The parallelogram 75° form and 7° relief angle deliver a stable cutting edge orientation and favourable entry geometry for face and slot milling operations. A 0.4 mm corner radius supports improved edge strength and smoother surface finishes on the workpiece, while the insert thickness and size maintain stiffness under load. The tolerance class M ensures repeatable seating and minimal run‑out when mounted in standard toolholders, so setups remain consistent and scrap rates are reduced. Economic operation and seamless integration into tooling systems This indexable design allows fast repositioning of wear‑free cutting edges and lowers tooling costs per component compared with solid cutters. The BCMT090304R-G55 WKP25S insert integrates well into common CNC toolholders and is suitable for both roughing and finishing passes depending on cutting data. For production lines seeking a balance between cost efficiency and high surface quality, the insert supports stable machining strategies and predictable maintenance intervals. Contact Metav Werkzeuge for tailored cutting data and to arrange supply of Walter Tools BCMT090304R-G55 WKP25S inserts with dedicated application support Technical data Article number: BCMT090304R-G55-WKP25S-WALTER Designation: BCMT090304R-G55 WKP25S Type: milling insert (Fräswendeschneidplatte) Manufacturer: Walter Tools Core technical data Relief angle: 7° Corner radius: 0.4 mm Insert size: 09 Thickness: 03 Geometry: Parallelogram 75° Chipbreaker: G55 Tolerance class: M Materials & special features Material applicability: P / K (steel and cast iron) Grade: WKP25S Series: Tiger‑tec Silver Coating: coated carbide (as per grade) Execution: T FAQ Which workpiece materials are suitable for this insert? The BCMT090304R-G55 WKP25S insert is designed for machining steel and cast iron (ISO groups P and K), making it suitable for a broad range of unalloyed, alloyed steels and typical casting materials. How does the G55 chipbreaker affect machining? The G55 chipbreaker promotes short, controllable chips and reduces the risk of chip snarls; this improves process reliability for both finishing and semi‑roughing operations with steels and cast iron. What advantages does the Tiger‑tec Silver technology provide? Tiger‑tec Silver coating increases wear resistance and thermal stability; the result is longer tool life and the ability to run higher cutting speeds with consistent workpiece quality when using the WKP25S grade. Is the geometry suitable for both slotting and face milling? Yes. The parallelogram 75° form and 7° relief provide a versatile cutting orientation that suits a range of milling tasks, from slotting to profiling and face operations. What are the key dimensions to check when ordering toolholders? Verify the insert designation BCMT090304R‑G55, insert thickness (03), size (09) and the parallelogram seating geometry to ensure compatibility with the chosen toolholder. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and do not indicate any affiliation between our company and the named brands. The offered item is an original, factory‑new product of Walter Tools.
BCMT090304R-G55 WKP35G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the WKP35G grade for consistent wear resistance and reliable chip control during steel and cast iron milling; order the BCMT090304R-G55 WKP35G through Metav Werkzeuge or consult our specialists for application-specific advice. BCMT090304R-G55 BCMT090304R-G55 WKP35G — Milling insert for Steel and Cast iron by Walter Tools The BCMT090304R-G55 WKP35G is a precision milling insert designed for productive cutting in steel (P) and cast iron (K), offering a coated carbide grade optimised for stable chip formation. Tiger·tec Gold coating for wear resistance Optimised for steel and cast iron machining Parallelogram 75° form, 7° clearance 0.4 mm corner radius, tolerance class M Increased productivity through advanced coating and grade The combination of the Tiger·tec Gold coating with the WKP35G grade delivers a marked improvement in tool life and process reliability when machining common ferrous materials. Coated carbide technology reduces abrasive wear and helps maintain a stable cutting edge over longer cycles, which translates into fewer tool changes, less downtime and higher throughput. This insert is particularly suited to repetitive production where consistency and predictable performance are priorities, making it a rational choice for industrial milling tasks. Geometry that supports precision and chip control The insert’s Parallelogram 75° geometry and 7° clearance angle contribute to favourable cutting forces and stable engagement with the workpiece. A 0.4 mm corner radius balances edge strength and surface finish, while the G55 chipbreaker promotes controlled chip breaking in both steels and cast irons. These design elements together reduce vibration and improve dimensional stability, enabling operators to achieve the required tolerances with fewer reworks and consistent surface quality. Application scope and material guidance Classified for the ISO material groups P (steel) and K (cast iron), the grade is tuned to handle the typical heat and chip characteristics of these materials. For steel, the coating assists with heat resistance and steady wear; for cast iron, the chip control and edge robustness address abrasive tendencies and brittle chip forms. Where batch sizes or component geometries demand repeatable results, this grade supports efficient cycle times and a reliable economic performance over extended runs. Integration and handling in tooling systems With a compact plate size and tolerance class M, the insert ensures consistent fitment across compatible toolholders and reduces variability during index changes. The execution and chipbreaker specification support straightforward tool setup and predictable cutting behaviour, which helps simplify process documentation and tool management in production environments. Compatibility with standard clamping systems allows rapid replacement and minimal machine downtime. Contact Metav Werkzeuge to specify the BCMT090304R-G55 WKP35G for production requirements and to receive tailored technical recommendations and delivery details. Technical data SKU: BCMT090304R-G55-WKP35G-WALTER Article designation: BCMT090304R-G55 WKP35G Series: Tiger-tec Gold Grade: WKP35G Manufacturer: Walter Tools Numbers / Core technical data Clearance angle: 7° Corner radius: 0.4 mm Plate form: Parallelogram 75° Plate size: 09 Plate thickness: 03 Tolerance class: M Designs / Special features Chipbreaker: G55 Coating: Tiger·tec Gold Material suitability: P (steel), K (cast iron) Execution: T Coated carbide grade for stable chip formation FAQ What materials is this insert suitable for? The BCMT090304R-G55 WKP35G is suitable for ISO material groups P (steel) and K (cast iron), with the WKP35G grade tuned for wear resistance and chip control in these materials. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating enhances abrasion resistance and edge stability, extending tool life and maintaining consistent cutting performance across longer production runs. What benefits does the parallelogram 75° form provide? The Parallelogram 75° geometry offers favourable cutting angles and stable engagement, reducing cutting forces and aiding dimensional accuracy during roughing and finishing passes. Is the corner radius suitable for finishing operations? The 0.4 mm corner radius offers a compromise between edge strength and surface finish, making the insert appropriate for applications where a smooth surface and robust edge are both required. What does tolerance class M indicate for this insert? Tolerance class M denotes a standardised manufacturing tolerance that ensures repeatable fitment in compatible toolholders and consistent indexability during insert changes. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
BCMT090304R-G55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coating and the WKP35S grade for extended tool life and stable chip control; the insert is optimised for machining steel and cast iron and supports reliable, productive milling. Order the BCMT090304R-G55 WKP35S directly via Metav Werkzeuge or contact the consultants for detailed application advice. BCMT090304R-G55 WKP35S indexable milling insert — Tiger‑tec Silver coating, for steel & cast iron | Walter Tools A BCMT090304R-G55 WKP35S indexable milling insert engineered for versatile finishing and productive roughing of steels and cast irons in high‑duty milling operations. Tiger‑tec Silver coating for long wear life WKP35S grade optimised for P and K materials Chipbreaker G55 for controlled chip formation Parallelogram 75° form for secure clamping Maximise cutter life through advanced coating and grade The combination of the Tiger‑tec Silver coating and the WKP35S carbide grade provides a measurable improvement in tool life and wear resistance when machining steel and cast iron. The multi‑layer PVD/CVD‑style coating reduces abrasive wear and thermal loading at the cutting edge, which translates into longer service intervals and fewer tool changes. This increases uptime on the shop floor and improves overall cost‑effectiveness for batch and continuous production. Consistent chip control for safer, more productive milling Equipped with the chipbreaker G55, the insert ensures predictable chip formation during interrupted and continuous milling of P and K materials. Controlled chips reduce the risk of workpiece damage and tool interference, simplifying chip evacuation and enhancing cycle reliability. The stable cutting behaviour supports higher feed rates and repeatable surface quality, contributing directly to process productivity. Geometry and robustness that improve process stability The parallelogram 75° shape combined with a 7° clearance angle and a 0.4 mm corner radius gives a favourable balance between entry strength and edge durability. The insert’s geometry promotes secure clamping and even load distribution at the holder interface, which minimises vibration and improves dimensional repeatability. For operations where edge stability is essential, this geometry reduces the likelihood of premature chipping and supports consistent surface finishes. Application clarity and material compatibility Designed for the ISO material groups P and K, the insert handles a broad spectrum of steel grades and cast irons typical in industrial machining. The WKP35S designation indicates a coated carbide optimised for both abrasive and thermal conditions encountered in steel and cast iron turning and milling. For users less familiar with ISO groupings: P denotes steels (including unalloyed and alloyed steels) and K denotes cast iron variants; selecting a grade matched to these groups ensures reliable performance. For tailored selection or a quotation for the Walter Tools BCMT090304R-G55 WKP35S insert, contact Metav Werkzeuge for technical guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: BCMT090304R-G55-WKP35S-WALTER Article description: Fräswendeschneidplatte BCMT090304R-G55 WKP35S Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Core specifications Relief angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: 03 Plate form: Parallelogram 75° Materials & features Coating: Tiger‑tec Silver (coated carbide) Chipbreaker: G55 Suitable for: Steel (P), Cast iron (K) Tolerance class: M Execution: T FAQ What material groups is this insert suitable for? The BCMT090304R‑G55 WKP35S insert is intended for ISO groups P and K, meaning it is suitable for machining a range of steel types and cast iron workpieces. How does the Tiger‑tec Silver coating benefit machining? The Tiger‑tec Silver coating on the BCMT090304R‑G55 WKP35S reduces abrasive wear and thermal load at the cutting edge, resulting in longer tool life and more consistent cutting performance. Is the chipbreaker suitable for interrupted cuts? Yes, the G55 chipbreaker is designed for controlled chip formation and performs well in interrupted as well as continuous milling operations, improving chip evacuation and surface quality. What does the 0.4 mm corner radius affect in cutting? A 0.4 mm corner radius provides a compromise between edge strength and finishing capability: it increases edge robustness while still allowing good surface quality and dimensional control in general milling tasks. Can this insert be used for high feed rates? The combination of the WKP35S grade, Tiger‑tec Silver coating and the G55 chipbreaker supports higher feed rates in many steel and cast iron applications, delivering improved material removal rates with stable chip control. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools is part of a global family of precision tooling manufacturers and its products are designed for high process reliability and consistent results. Protected trademarks and brand names are the property of their respective owners. Mention of brand names is for explanatory purposes only and does not indicate any affiliation with our company. The offered item is an original, factory‑new product of the manufacturer.
BCMT090304R-G55 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold coating and the WSM35G grade for secure chip control and extended tool life when machining stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our application specialists for tailored support. BCMT090304R-G55 WSM35G milling indexable insert — for stainless steel and superalloys, Tiger·tec Gold A robust milling indexable insert, the BCMT090304R-G55 WSM35G by Walter Tools is designed for productive machining of stainless steel and heat‑resistant superalloys, combining a specialised grade and chipbreaker geometry for consistent performance Tiger·tec Gold for improved edge life Grade WSM35G for stainless steel and S materials Parallelogram 75° shape for flexible pocketing 0.4 mm nose radius for fine surface quality Higher productivity on stainless steel and superalloys The combination of the WSM35G grade and the Tiger·tec Gold coating delivers predictable cutting behaviour when machining demanding materials. Coated carbide, engineered for heat resistance and wear control, supports a stable cutting edge and reduced tendency to build up on the cutting face. This results in fewer interruptions for edge changes and a more continuous production flow. The G55 chipbreaker further promotes reliable chip control, lowering the risk of entanglement and improving overall machining efficiency. Process security and longer tool life through coating technology The insert’s coating technology is optimised to withstand higher thermal loads and abrasive wear typical for S‑ and M‑group materials. The Tiger·tec Gold multilayer system increases resistance to flank wear and maintains cutting performance over extended cycles, which translates into longer tool life and more consistent part quality. For operations where surface finish and repeatability matter, this treatment reduces the frequency of tool changes and supports cost‑effective production. Geometry and edge design for consistent surface finish The parallelogram 75° form and 7° clearance provide a versatile cutting angle suitable for a range of milling pockets, while the 0.4 mm nose radius contributes to a fine surface finish without compromising strength at the cutting edge. Together with the G55 chipbreaker, the geometry balances chip formation and tool strength, enabling secure chip evacuation and uniform workpiece surfaces. The insert’s tolerance class M ensures consistent fit and repeatable mounting in compatible cutter bodies. Contact Metav Werkzeuge for application advice and delivery details on the Walter Tools BCMT090304R-G55 WSM35G milling insert — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: BCMT090304R-G55-WSM35G-WALTER Designation: BCMT090304R-G55 WSM35G Type: milling indexable insert Series: Tiger·tec Gold Grade: WSM35G Dimensions & geometry Size: 09 Thickness: 03 mm Nose radius: 0.4 mm Clearance angle: 7° Shape: parallelogram 75° Applications & features Coated carbide grade (Tiger·tec Gold) Chipbreaker: G55 Material groups: M (stainless steel), S (superalloys/titanium) Tolerance class: M Execution: T FAQ Which materials is this insert suitable for? The BCMT090304R-G55 WSM35G milling insert from Walter Tools is specified for M (stainless steel) and S (heat‑resistant superalloys and titanium) material groups, offering stable chip formation for these demanding materials. What benefit does the G55 chipbreaker provide? The G55 chipbreaker on the BCMT090304R-G55 promotes controlled chip formation and evacuation, improving surface quality and reducing the likelihood of chip re‑cutting during milling operations with haft‑prone materials. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating enhances thermal and abrasive resistance of the coated carbide, resulting in improved edge stability and extended tool life for milling stainless steel and superalloys with the Walter Tools insert. Which cutter pockets accept this insert format? The insert fits cutter systems designed for the BCMT090304R-G55 format; the parallelogram 75° geometry allows flexible pocketing while maintaining secure seating and repeatable indexing. Are there recommendations for cutting conditions with this grade? When using the WSM35G grade and Tiger·tec Gold coating, adopt cutting parameters aiming at moderate to high surface speeds appropriate for stainless steel and superalloys, and rely on the chipbreaker geometry for stable chip flow and consistent surface finish. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no association between our company and the listed brands. The offered item is original, factory‑new goods of the manufacturer.
BCMT090304R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
Combining the heat‑resistant WSM45X coated carbide with the G55 chipformer and a compact 0.4 mm nose radius, this insert offers reliable chip control and extended edge life when machining stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or contact our consultants for tailored application advice. BCMT090304R-G55 WSM45X — Milling insert (Parallelogram 75°), 7° relief — Walter Tools The BCMT090304R-G55 WSM45X is a coated carbide milling insert engineered for secure chip formation and stable cutting edges in demanding stainless steel and superalloy applications. Coated carbide grade WSM45X for tough alloys Optimised chipformer G55 for secure chip control 7° relief angle with 0.4 mm nose radius Parallelogram 75° shape for flexible milling High‑performance grade for demanding materials The insert’s WSM45X grade is a coated carbide formulation optimised for materials that challenge tool life. Designed for stainless steel and heat‑resistant superalloys (ISO groups M and S), the grade emphasises thermal stability and abrasion resistance to reduce flank wear. In practice, this means fewer tool changes and more predictable component tolerances when tackling heavy‑duty workpieces, delivering measurable gains in machining efficiency and process reliability. Precision geometry that secures surface quality A 0.4 mm nose radius combined with the Parallelogram 75° plate form provides a balance between robustness and finish. The 7° relief angle reduces rubbing at entry while maintaining a stable cutting edge under load. These geometric choices translate into consistent surface finish and repeatable dimensional control on difficult materials, which is essential where component integrity and fit are critical in serial production or aerospace‑grade parts. Controlled chip formation for higher productivity The G55 chipformer is engineered to break and evacuate chips reliably across a range of feeds and depths of cut. Effective chip control minimises the risk of recutting and machine stoppages, enabling higher metal removal rates with reduced cycle‑time variability. For production environments, this rational advantage supports more predictable throughput and lower overall machining costs per component. Practical application and toolroom support Supplied in the Walter Schneidstoffsorte series, this insert suits applications where heat build‑up and built‑up edge are common concerns. The product benefits from Walter Tools’ focus on process security and repeatability, helping to maintain tool life across batches. For guidance on cutting parameters or compatibility with specific holder systems, Metav Werkzeuge’s consultants can provide application‑oriented recommendations and setup tips. For stainless steel and superalloy milling tasks trust Walter Tools’ WSM45X‑grade inserts — contact Metav Werkzeuge for personalised application advice or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BCMT090304R-G55-WSM45X-WALTER Designation: BCMT090304R-G55 WSM45X Product type: Milling insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Facts Relief angle: 7° Nose radius: 0.4 mm Shape: Parallelogram 75° Size: 09 Thickness: 03 Tolerance class: M Special features Coated carbide grade: WSM45X Chipformer: G55 Material suitability: stainless steel; S / M Application: Heavy‑duty machining and, depending on geometry, stainless steel Plate form: Parallelogram 75° FAQ Is this insert suitable for stainless steel? Yes. The BCMT090304R-G55 WSM45X insert is specified for stainless steel (ISO group M) and is designed to manage the thermal and adhesion challenges typical of these materials. Can the insert be used on superalloys and titanium? The WSM45X grade is intended for use on heat‑resistant superalloys and, depending on component geometry and parameters, titanium (ISO group S), offering improved thermal resistance and stable cutting behaviour. What are the key geometry benefits for finishing operations? The combination of a 0.4 mm nose radius and 7° relief ensures reduced rubbing and consistent surface quality, making the insert suitable for operations where finish and dimensional repeatability matter. Which chipformer is integrated and what is its advantage? The integrated G55 chipformer delivers controlled chip breakage and evacuation, reducing rework and machine interruptions in continuous milling cycles. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Walter Tools: The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metal machining and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not indicate any affiliation between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer.
BCMT090304R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
This milling insert combines the Tiger‑tec Gold PVD coating with a versatile WSP45G grade and a 75° parallelogram form to deliver stable chip control and long tool life in mixed production. With a 7° clearance angle and a 0.4 mm corner radius, it balances edge strength and surface finish for reliable, repeatable milling of steel, stainless steel and heat‑resistant alloys. Order the BCMT090304R-G55 WSP45G milling insert directly via Metav Werkzeuge or ask our consultants if needed. BCMT090304R-G55 WSP45G milling insert — Walter Tools, Tiger‑tec Gold, versatile P/M/S performance BCMT090304R-G55 WSP45G is a coated indexable milling insert designed for robust, high‑security milling across a wide range of workpiece materials Tiger‑tec Gold PVD coating for extended wear Versatile for steel, stainless and superalloys Parallelogram 75° shape for improved accessibility 7° clearance and 0.4 mm corner radius for stability Consistent productivity through advanced coating technology The Tiger‑tec Gold coating combined with the WSP45G grade is formulated to provide enhanced wear resistance and reliable tool life under varying cutting conditions. Designed for use across the ISO material groups P/M/S, the insert supports machining of unalloyed and alloyed steel (P), rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S). This versatility reduces tool changes and simplifies inventory, contributing to a more predictable production flow and lower unit costs per component. The coating also improves oxidation resistance at elevated temperatures, which is particularly beneficial when milling tougher materials. Geometry engineered for stable cutting and good surface finish The insert’s parallelogram 75° form and 7° clearance deliver an effective balance between edge engagement and tool protection. The 0.4 mm corner radius increases edge strength and reduces the risk of chipping while still allowing acceptable surface finish in finish and semi‑finish passes. These geometric choices reduce radial forces and vibration, which translates into steadier cutting conditions, longer insert life and more consistent dimensional results on the workpiece. For pocketing, shoulder milling and trochoidal strategies the geometry supports secure chip evacuation and improved process stability. Application reliability and process security for machining specialists This grade is suitable for a broad set of milling applications where repeatable performance and reliable chip control are required. The insert’s form and grade make it a practical choice for mixed‑product environments that require one versatile solution for different materials and tolerances. The series’ design emphasises process security and predictable wear behaviour, helping to reduce unscheduled tool changes. For users seeking tailored cutting parameters, technical consultation is available to match speeds, feeds and depth of cut to machine capability and workpiece properties, ensuring the chosen strategies exploit the insert’s strengths. Contact Metav Werkzeuge for customised cutting data, sample availability and to discuss the BCMT090304R-G55 WSP45G Tiger‑tec Gold insert — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BCMT090304R-G55-WSP45G-WALTER SKU: BCMT090304R-G55-WSP45G-WALTER Designation: BCMT090304R-G55 WSP45G Product type: Fräswendeschneidplatte (milling insert) Numbers / core technical data Clearance angle: 7° Corner radius: 0,4 Insert size: 09 Thickness: 03 Tolerance class: M Chipbreaker: G55 Designs / special features Series: Tiger‑tec Gold Grade: WSP45G (coated carbide) Insert form: Parallelogram 75° Execution: T Material groups: P / M / S Suitable for steel, rostfreier Stahl, superalloys and titanium FAQ What materials is this insert intended for? The BCMT090304R-G55 WSP45G insert is formulated for ISO groups P / M / S, which covers steel, rostfreier Stahl (stainless) and heat‑resistant superalloys and titanium. How does the Tiger‑tec Gold coating benefit milling operations? The Tiger‑tec Gold PVD coating on this Walter Tools insert improves wear resistance and thermal stability, resulting in longer tool life and steadier performance under mixed cutting conditions. Which geometrical features help prevent edge chipping? The combination of a 0.4 mm corner radius and a 7° clearance angle enhances edge strength and reduces chipping risk while maintaining a good surface finish for finish and semi‑finish passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only and do not indicate any affiliation between our company and the trademark owners. The item offered is an original, factory‑new product from the manufacturer.
BCMT090304R-K55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of the WKP35G grade and Tiger·tec Gold coating for increased wear resistance and stable chip formation. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. BCMT090304R-K55 WKP35G — Parallelogram 75° milling insert by Walter Tools, Tiger·tec Gold, for steel and cast iron BCMT090304R-K55 WKP35G is a milling indexable insert designed for robust finishing and medium-duty roughing in steel and cast iron applications Tiger·tec Gold coating for long tool life Optimised K55 chipbreaker for secure chip control Parallelogram 75° form with 7° clearance 0.4 mm corner radius for consistent surface finish Engineered for stable, repeatable machining performance The Tiger·tec Gold coating combined with the WKP35G coated-carbide grade provides a balance of wear resistance and edge stability that is particularly beneficial when machining steel and cast iron. This geometry and grade pairing reduces flank and crater wear under typical shop conditions, which supports longer tool life and fewer interruptions. The insert’s design targets consistent cutting behaviour, enabling predictable tool changes and reduced rework in serial production. By favouring durability and process reliability, the solution helps to maintain steady output and improves overall machining efficiency. Controlled chip formation and improved surface quality An optimised K55 chipbreaker is integrated to manage chips effectively across the typical cutting ranges for P and K workpiece groups. The parallelogram 75° shape together with a 7° clearance angle delivers a favourable cutting direction that reduces vibration and supports surface integrity. The 0.4 mm corner radius gives a compromise between edge strength and surface finish, producing consistent part geometry with less secondary finishing. For production environments where repeatable part quality matters, this insert minimises the risk of built-up edge and supports stable cycle times. Simple specification and shop-floor integration This insert is supplied in the BCMT090304R-K55 geometry and fits toolholders designed for the BCMT family, enabling straightforward replacement in existing milling systems. The tolerance class M and series alignment under Tiger-tec Gold make inventory management easier when standardising on a reliable coated-carbide solution. The execution code T and chipbreaker designation are clearly marked for fast identification during tool changes. For workshops seeking a pragmatic mix of tool life, process security and broad material coverage, the combination of grade and geometry offers a practical route to consistent machining results. For specific application advice or to order BCMT090304R-K55 WKP35G inserts from Metav Werkzeuge, please contact Metav Werkzeuge for tailored recommendations and stock availability Technical data SKU: BCMT090304R-K55-WKP35G-WALTER Article designation: BCMT090304R-K55 WKP35G Manufacturer: Walter Tools Facts Form: Parallelogram 75° Free angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: 03 Tolerance class: M Chipbreaker: K55 Special features Coating: Tiger·tec Gold Grade: WKP35G (coated carbide) Material suitability: P (steel) and K (cast iron) Series: Tiger-tec Gold Execution: T FAQ Which materials is this insert intended for? The BCMT090304R-K55 WKP35G milling insert from Walter Tools is formulated for machining steel (P) and cast iron (K) according to the ISO grouping indicated for the grade. What is the benefit of the K55 chipbreaker? The K55 chipbreaker on the BCMT090304R-K55 WKP35G promotes controlled chip formation and evacuation, which supports stable cutting and helps to maintain consistent surface quality. How does the parallelogram 75° form affect machining? The parallelogram 75° form used on the BCMT090304R-K55 WKP35G provides a favourable cutting direction that reduces vibration and assists in achieving reliable tool performance on medium-duty operations. Can this insert be used in standard BCMT toolholders? Yes, the BCMT090304R-K55 WKP35G is designed to fit milling cutters and indexable systems that accept BCMT-format inserts, allowing straightforward integration into existing tool setups. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used solely for explanation; there is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
BCMT090304R-K55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of durable coated carbide, precise geometry and stable chip control for reliable milling of steels and cast irons. Benefit from the Tiger·tec Silver technology and the WKP35S grade for consistent tool life and reproducible surface quality. Order or request process advice via Metav Werkzeuge to integrate the insert into existing cutters. BCMT090304R-K55 WKP35S — milling insert for steel and cast iron, Tiger·tec Silver, Walter Tools The BCMT090304R-K55 WKP35S is a parallelogram-style milling insert designed for efficient machining of steels and cast irons, combining a tungsten carbide substrate with a high-performance coating for extended tool life and stable chip formation. Tiger·tec Silver coating for extended tool life Suitable for steel and cast iron machining Parallelogram 75° shape for positive cutting Corner radius 0.4 mm for precise finishing Increased productivity through advanced grade and coating The combination of the WKP35S grade and Tiger·tec Silver coating delivers a clear performance advantage in general milling operations. The coated carbide substrate resists abrasive wear and heat, which supports longer tool life and fewer index changes per production run. For users seeking measurable gains, this results in reduced downtime and more predictable costing per component because inserts remain dimensionally stable over longer cutting intervals. The engineered coating also contributes to consistent chip control, reducing the risk of built-up edge and improving reproducibility in serial production. Reliable material compatibility for process planning This insert is optimised for the ISO material groups P (steel) and K (cast iron). That means the cutting geometry and grade are tuned to handle the thermal loads and chip forms typical for unalloyed and alloyed steels as well as abrasive cast materials. For shops processing mixed batches, the insert provides a dependable compromise between wear resistance and fracture toughness. Using a grade tailored for both material classes simplifies tool inventory and makes process planning more straightforward when switching between components made from steel and cast iron. Geometry tuned for surface quality and chip control The parallelogram 75° form combined with a 7° relief angle produces a positive cutting action that reduces cutting forces and enhances surface finish. The corner radius 0.4 mm supports fine finishing passes where dimensional accuracy and edge integrity are required. The integrated K55 chipbreaker guides chip flow for typical turning-to-milling chip shapes found in P and K materials, helping to avoid long, stringy chips and facilitating safe evacuation. These design elements together reduce the need for frequent rework and contribute to a predictable machining outcome. Simple integration and dependable repeatability in production With a standard plate size and tolerance class M, the insert fits common milling cutter bodies and supports consistent seating and clamping accuracy. The BCMT090304R-K55 WKP35S benefits from Walter Tools' focus on stable cutting edges and reproducible performance, which means less time spent on trial-and-error adjustments. For technical queries or to confirm compatibility with a specific cutter head, Metav Werkzeuge provides process advice and technical data. If additional specifications are required, Metav Werkzeuge can be contacted at 📧 info@metav-werkzeuge.com or ☎️ +49 2822 7131930 for tailored recommendations. Discuss integration and supply options with Metav Werkzeuge to match the BCMT090304R-K55 WKP35S to the production process and secure fast delivery from Metav Werkzeuge and Walter Tools. Technical Data Article number: BCMT090304R-K55-WKP35S-WALTER Description: Fräswendeschneidplatte BCMT090304R-K55 WKP35S Manufacturer: Walter Tools Series: Tiger-tec Silver Facts Free angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: 03 Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S (coated carbide) Suitable for: steel (P) and cast iron (K) Chipbreaker: K55 Plate shape: Parallelogram 75° Version: T FAQ Which materials is this insert suited for? The BCMT090304R-K55 WKP35S is designed for ISO groups P (steel) and K (cast iron), offering balanced wear resistance and toughness for those materials. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP35S grade improves thermal resistance and wear behaviour, helping the BCMT090304R-K55 WKP35S to maintain edge integrity and extend cutting intervals. How does the parallelogram 75° form affect cutting? A parallelogram 75° geometry produces a positive cutting action and reduced radial forces, which aids surface finish and chip evacuation when using the BCMT090304R-K55 WKP35S. Which chipbreaker is fitted and what does it do? The K55 chipbreaker is configured to control chip shape and evacuation for typical steels and cast irons, lowering the risk of long chips and improving machining stability with the BCMT090304R-K55 WKP35S. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and product names are the property of their respective owners. The mentioned brand names are cited for explanation only and imply no affiliation between our company and the respective trademark holders. The offered item is original, brand-new manufacturer product.
BCMT090304R-K55 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM35G grade and the K55 chipbreaker for secure chip formation and long edge life; order directly via Metav Werkzeuge or contact the consultants for detailed application advice. Milling indexable insert BCMT090304R-K55 WSM35G — for stainless steels and superalloys — Walter Tools The BCMT090304R-K55 WSM35G is a Tiger·tec Gold-coated milling insert designed for reliable machining of stainless steels and heat-resistant alloys in production environments. *Tiger·tec Gold coating for high heat resistance *WSM35G grade for stainless steel machining *Parallelogram 75° shape for stable cutting *K55 chipbreaker for secure chip control Consistent edge life when machining stainless and superalloys The combination of the WSM35G coated carbide grade and the Tiger·tec Gold technology ensures improved heat resistance and a more stable cutting edge when machining demanding materials. The cutting material is optimised for the ISO groups M (stainless steels) and S (heat-resistant superalloys and titanium), which typically cause high temperatures and built-up edge formation. Using a coated grade that supports secure chip formation reduces tool wear and the need for frequent index changes, improving process reliability and lowering overall machining costs. Controlled chip flow and reduced rework The K55 chipbreaker is tailored to produce predictable chip shapes in long-chipping materials, which assists in evacuating swarf from the cut and reduces the risk of workpiece surface damage. The insert’s parallelogram 75° geometry changes the effective entry angle to favour stable cutting, while the 7° relief reduces rubbing on the flank and helps maintain cutting forces. The small 0.4 mm corner radius provides a balance between a defined cutting edge and a fine surface finish, making the insert suitable for operations where both edge robustness and finished part quality matter. Practical fitment, repeatability and workshop benefits The insert follows the established BCMT format and the plate dimensions (size 09, thickness 03) match common cutter bodies for straightforward replacement and minimal reworking of tool assemblies. The tolerance class M supports consistent seat fit and indexing accuracy, promoting repeatable cycle times and lowering setup effort. As a result, the insert is well suited for serial production and job-shop environments where predictable tool life, manageable stock levels and reduced machine downtime are priorities. Contact Metav Werkzeuge today for quoted delivery times, compatible cutter holders and application recommendations tailored to the WSM35G grade and K55 chipbreaker Technical Data Article number: BCMT090304R-K55-WSM35G-WALTER Label: Fräswendeschneidplatte BCMT090304R-K55 WSM35G Walter Tools Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: 03 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSM35G Chipbreaker: K55 Plate form: Parallelogram 75° Material suitability: S / M Application notes: Suitable for stainless steels (M) and heat-resistant superalloys/titanium (S) FAQ What materials is this insert suitable for? This insert is specified for stainless steels (ISO group M) and for high-temperature alloys/titanium (ISO group S) according to the WSM35G grade and Tiger·tec Gold technology. How does the K55 chipbreaker improve machining? The K55 chipbreaker on the BCMT090304R-K55 promotes controlled chip formation and evacuation, lowering the risk of surface damage and improving process stability during milling. What does the parallelogram 75° shape mean for cutting? A parallelogram 75° geometry alters the effective entering angle to enhance cutting stability and reduce radial loads, which is beneficial for interrupted cuts and heavy engagement. Can the insert be used in standard cutter bodies? The BCMT format and the specified plate size and thickness are compatible with common milling cutter bodies designed for this insert family; ensure the cutter seat matches the tolerance class M. What benefit does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases heat resistance and edge stability, extending edge life in demanding machining of stainless and heat-resistant materials. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names belong to their respective owners. Brand names are mentioned for identification purposes only. The offered article is an original, factory-new product of the manufacturer.
BCMT090304R-K55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the K55 chipbreaker for consistent chip control and extended tool life; the robust parallelogram geometry and medium tolerance class support reliable milling in mixed production environments. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. BCMT090304R-K55 WSP45G — Fräswendeschneidplatte (milling indexable insert) with Tiger‑tec Gold, for Stahl / rostfreier Stahl / S, Walter Tools BCMT090304R-K55 WSP45G is a Tiger‑tec Gold‑grade milling insert designed for versatile roughing and finishing across Stahl, rostfreier Stahl and heat‑resistant alloys Tiger‑tec Gold PVD coating Suitable for Stahl, rostfreier Stahl, S Parallelogram 75° geometry 0.4 mm corner radius for edge strength Productivity across mixed materials with consistent performance The Tiger‑tec Gold coating combined with the WSP45G grade delivers a balance between wear resistance and toughness that benefits mixed production runs. The insert is engineered for applications classified as P/M/S: P indicates suitability for Stahl (unalloyed and alloyed steels), M for rostfreier Stahl (stainless variants with high toughness), and S for heat‑resistant superalloys and titanium that demand thermal stability. This material versatility reduces tool changes and simplifies process planning, contributing directly to higher throughput and predictable cycle times. Secure chip control and longer productive life Aimed at rational efficiency, the K55 chipbreaker geometry promotes stable chip formation under varying cutting conditions, which reduces the risk of built‑up edge and irregular wear. Combined with the insert’s medium tolerance class M, this results in repeatable clamping and interchangeability in indexable toolholders. The net effect is fewer interruptions for tool inspection and replacement, improving overall equipment effectiveness and lowering unit machining costs in the medium to high‑volume shop. Geometry engineered for reliable cutting and part quality The Parallelogram 75° form and a relief angle of 7° create an advantageous cutting approach for a wide range of milling tasks, from face milling to shoulder operations. The 0.4 mm corner radius enhances edge strength for intermittent cuts while still allowing good surface finish capability when stepping over or finishing. These geometric choices translate into stable cutting forces, less vibration and a more consistent surface quality on machined components — essential where reproducibility matters. Practical handling and application guidance for planners and operators As an indexable insert, this component fits standard toolholders specified for BCMT geometry and supports quick indexing to restore cutting edges. The designation BCMT090304R‑K55 encompasses size, thickness and cutting edge form factors that match widely used clamping systems, simplifying tool inventory. For machining parameter recommendations and optimisation tailored to specific alloys or cycle requirements, Metav Werkzeuge provides consultancy and application data to integrate the insert into existing tool cycles efficiently. Contact Metav Werkzeuge for precise application support and delivery of Walter Tools Tiger‑tec Gold inserts to keep production running smoothly Technical Data Article number: BCMT090304R-K55-WSP45G-WALTER Item: Fräswendeschneidplatte BCMT090304R-K55 WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Facts Relief angle: 7° Corner radius: 0.4 mm Plate size: 09 Plate thickness: 03 Tolerance class: M Special features Tiger‑tec Gold PVD‑coated carbide K55 chipbreaker for stable chip control Parallelogram 75° plate form Suitable for P / M / S (Stahl, rostfreier Stahl, superalloys/titanium) BCMT indexable insert geometry for common toolholders FAQ What materials is this insert suitable for? The BCMT090304R‑K55 WSP45G insert is specified for P/M/S applications, meaning it is suitable for Stahl, rostfreier Stahl and heat‑resistant superalloys such as titanium. How does the Tiger‑tec Gold coating help in milling? The Tiger‑tec Gold coating on the WSP45G grade increases wear resistance while maintaining toughness, which leads to longer tool life and more consistent performance in mixed‑material milling. Which chipbreaker is fitted and what is its benefit? This insert features the K55 chipbreaker, designed to promote uniform chip formation and reduce the likelihood of built‑up edge, improving surface finish and tool life. Is the geometry suitable for both roughing and finishing? Yes; the Parallelogram 75° geometry with a 0.4 mm corner radius offers a compromise between edge strength for roughing and the capability to achieve good surface quality during finishing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT090308L-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a dedicated G55 chipbreaker for reliable chip control and extended tool life; the parallelogram 75° geometry with a 7° clearance angle ensures versatile, stable milling in Stahl and Gusseisen. Order the insert directly via Metav Werkzeuge or consult the team for application-specific cutting data. BCMT090308L-G55 milling indexable insert BCMT090308L-G55 WKP35G for Stahl and Gusseisen — Walter Tools A BCMT090308L-G55 WKP35G milling insert engineered for high-productivity roughing and finishing operations in Stahl and Gusseisen, featuring Tiger·tec Gold coating and the G55 chipbreaker for consistent machining results Tiger·tec Gold coating for extended life G55 chipbreaker for controlled chips Parallelogram 75° geometry for versatile milling 7° clearance angle, 0.8 mm corner radius Longer tool life through advanced coating and substrate The Tiger·tec Gold technology combines a wear-resistant coating with a robust substrate that reduces flank and crater wear under high thermal load. This coated carbide construction is designed to withstand the typical temperatures and abrasive conditions encountered when machining Stahl and Gusseisen, which translates into longer intervals between indexings and fewer tool changes. For production environments focused on uptime, the insert’s material pairing provides measurable efficiency gains by maintaining cutting-edge stability over extended cycles. Improved process stability with precise chip control The integrated chipbreaker G55 promotes predictable chip formation and evacuation, reducing the risk of chip packing and improving surface finish consistency. In interrupted or heavy milling cuts the chip geometry helps to control forces and vibration, supporting stable feeds and speeds. The result is a more reproducible process and less scrap — a direct benefit for production planning and cost-per-part calculations. The insert’s tolerance class M ensures repeatable seating in the pocket for high-precision setups. Flexible geometry for diverse milling strategies The Parallelogram 75° insert form and 0.8 mm corner radius deliver an adaptable cutting edge suited to radial engagement variations and dynamic toolpaths. With a 7° clearance angle and compact dimensions (size 09, thickness 03), the insert balances strength and accessibility in tight toolholder arrangements. This geometry supports both roughing passes and semi-finishing steps with reduced risk of edge chipping, enabling consolidated tool plans and fewer tool changes across mixed-material batches. Contact Metav Werkzeuge for tailored cutting parameters and application advice on Walter Tools BCMT090308L-G55 WKP35G inserts with Tiger·tec Gold for productive milling in Stahl and Gusseisen Technical data Article number: BCMT090308L-G55-WKP35G-WALTER SKU / UID: BCMT090308L-G55-WKP35G-WALTER Label: Fräswendeschneidplatte BCMT090308L-G55 WKP35G Walter Tools Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: 03 Geometry: Parallelogram 75° Tolerance class: M Materials & special features Series: Tiger·tec Gold Grade / sort: WKP35G Coating: Tiger·tec Gold (coated carbide) Chipbreaker: G55 Application groups: Stahl (P), Gusseisen (K) Execution: T FAQ What materials is this insert suitable for? The BCMT090308L-G55 WKP35G insert is specified for machining Stahl and Gusseisen, optimised for the thermal and abrasive characteristics of these groups. How does the Tiger·tec Gold coating benefit production runs? The Tiger·tec Gold coating on this Walter Tools insert reduces wear rates and extends edge life, resulting in longer tool cycles and fewer indexings during continuous production. What role does the G55 chipbreaker play in milling? The G55 chipbreaker generates controlled chip shapes and assists in chip evacuation, which enhances process stability and surface consistency, particularly in interrupted cuts. Is the insert suitable for finishing as well as roughing? Yes; the combination of 0.8 mm corner radius and Parallelogram 75° geometry provides the edge strength needed for roughing while allowing acceptable surface quality in semi-finishing operations. What does tolerance class M imply for setup accuracy? Tolerance class M denotes consistent dimensional accuracy and fit in standard toolholders, supporting repeatable tool positioning and reliable machining results. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is original, brand-new goods from the manufacturer.
BCMT090308L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a Parallelogram 75° geometry for predictable chip control and long tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific cutting data. BCMT090308L-G55 WSP45G Fräswendeschneidplatte (milling insert) by Walter Tools — Tiger·tec Gold PVD, for milling steel and superalloys The BCMT090308L-G55 WSP45G is an indexable milling insert engineered for demanding finishing and semi-finishing operations in steels, stainless steels and high-temperature alloys. Tiger·tec Gold PVD coating Versatile for Steel, stainless steel and superalloys Parallelogram 75° geometry 0.8 mm corner radius for fine finishes Durable coating that extends productive uptime The Tiger·tec Gold PVD system used in this grade combines a tough, wear-resistant surface with balanced toughness, yielding consistent tool life in interrupted and continuous milling. The grade WSP45G is a PVD-coated carbide designed to manage typical heat build-up and chip behaviour encountered when machining group P (steel), M (stainless) and S (heat-resistant alloys and titanium). For workshops aiming to reduce tool changes and stabilise component quality, this coating delivers a measurable improvement in wear resistance and process stability. The technical advantage translates into fewer unscheduled stops and a steadier production flow. Geometry engineered for stable cutting and good surface quality The insert’s Parallelogram 75° shape and a clearance angle of 7° produce a positive cutting action with favourable cutting-force distribution, which helps preserve the cutting edge under varying loads. The 0.8 mm corner radius balances edge strength with the ability to produce fine surface finishes, making the insert suitable for both finishing passes and modest depth of cut operations. The available chipbreaker G55 supports controlled chip segmentation, reducing re-cutting and improving coolant access; this combination results in consistent component tolerances and improved downstream processing. Application scope and practical guidance for integration As a purpose-built indexable milling solution, this insert is intended for a wide range of milling tasks in modern machine shops, from profile milling to shoulder and face milling in medium to high-alloy materials. Compatibility with machining groups P, M and S means the insert can be standardised across mixed-production environments, simplifying tool management. For best results, pair the insert with a suitable toolholder that supports the parallelogram geometry and consult spindle speed and feed charts for the specific material group; Metav Werkzeuge can provide cutting parameter recommendations to suit machine rigidity and workpiece metallurgy. For tailored recommendations and reliable supply of Walter Tools inserts like the BCMT090308L-G55 WSP45G, contact Metav Werkzeuge for application advice and rapid delivery. Technical data SKU: BCMT090308L-G55-WSP45G-WALTER Designation: BCMT090308L-G55 WSP45G Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Grade: WSP45G Core specifications Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness: 03 Shape: Parallelogram 75° Tolerance class: M Applications & features Material compatibility: P / M / S (Steel, stainless steel, superalloys/titanium) Chipbreaker: G55 Coating technology: Tiger·tec Gold PVD Execution: T FAQ Which materials is the insert suited for? The BCMT090308L-G55 WSP45G is specified for machining steels, stainless steels and heat-resistant alloys (material groups P, M and S) and performs well where heat and tough chip formation are factors. How does the Parallelogram 75° geometry affect cutting performance? The Parallelogram 75° form improves chip flow and reduces cutting forces in certain milling directions, helping to maintain a stable cutting edge and consistent surface finish with the BCMT090308L-G55 insert. What is the purpose of the G55 chipbreaker? The G55 chipbreaker promotes controlled chip segmentation and evacuation, which reduces recutting and supports reproducible component tolerances when using this Walter Tools milling insert. Can the insert be used for finishing and semi-finishing? Yes, the 0.8 mm corner radius and the positive geometry make the insert suitable for finishing and semi-finishing passes while balancing edge strength and surface quality. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT090308R-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of the Tiger·tec Gold coating and the WKP35G cutting grade for reliable, long-life milling of steel and cast iron; the G55 chipbreaker provides consistent chip control and surface quality, while the parallelogram geometry ensures versatile tool engagement. Order this insert through Metav Werkzeuge or ask the technical consultants for application-specific advice. BCMT090308R-G55 WKP35G indexable milling insert — Tiger·tec Gold, for steel & cast iron — Walter Tools The BCMT090308R-G55 WKP35G is an indexable milling insert designed for machining steel and cast iron, offering enhanced wear resistance and optimised chip control for stable, productive milling operations. Tiger·tec Gold coating for extended tool life Optimised chip control with G55 chipbreaker Parallelogram 75° shape for versatile milling Suitable for steel and cast iron machining Consistent performance through advanced coating and grade The combination of the Tiger·tec Gold technology and the WKP35G cutting grade results in a coated carbide insert engineered for high process reliability when machining ISO P and K materials. The multi-layer coating promotes thermal stability and reduces abrasive wear, which translates into longer intervals between tool changes and more predictable production cycles. These measurable advantages support a cost-efficient machining strategy, especially where repeatability and surface quality matter. Geometry and chip control that improve productivity A dedicated chipbreaker, G55, paired with the parallelogram 75° plate form and a 7° relief angle ensures controlled chip segmentation and secure engagement in shoulder and face milling. The 0.8 mm corner radius balances robustness and surface finish, helping to avoid premature edge chipping while maintaining dimensional precision. This geometry is particularly valuable in mixed-production environments where both heavy cuts and finishing passes occur. Versatile application and process security in shop environments Designed for a wide range of steels (unalloyed and alloyed) and cast irons, the cutting grade delivers stability across catalogue- and geometry-dependent tasks. The insert’s tolerance class M supports consistent seating and reproducible results in indexable toolholders, facilitating fast insert indexing and minimal set-up variation. For production lines aiming to reduce downtime, the predictable wear behaviour of this grade supports tighter planning and fewer unexpected interventions. Ease of integration and handling for production teams The designation BCMT090308R-G55 enables straightforward identification and ordering within existing tooling systems; the plate size 09 and thickness 03 match common pocket standards, simplifying inventory management. As a Tiger·tec Gold series product from Walter Tools, the insert benefits from established material science and manufacturing standards, making it a reliable choice for machining shops seeking to balance tool life and machining quality without complex adjustments to cutting data. Contact Metav Werkzeuge today for tailored recommendations on integrating the Tiger·tec Gold BCMT090308R-G55 WKP35G into existing tool cycles or for sample availability and cutting data advice Technical Data SKU: BCMT090308R-G55-WKP35G-WALTER Article: BCMT090308R-G55 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Product type: Fräswendeschneidplatte Facts Relief angle: 7° Corner radius: 0.8 mm Plate size: 09 Thickness: 03 Shape: Parallelogram 75° Tolerance class: M Special features Coated carbide (Tiger·tec Gold technology) Chipbreaker: G55 Material compatibility: Steel (P) and Cast iron (K) Execution: T Designation: BCMT090308R-G55 FAQ What materials is this insert suitable for? The BCMT090308R-G55 WKP35G insert is intended for ISO P (steel) and ISO K (cast iron) machining applications and is optimised for these material groups. How does the G55 chipbreaker affect machining? The G55 chipbreaker provides controlled chip formation and evacuation, helping to maintain a stable cut and improving surface quality when using the BCMT090308R-G55 WKP35G insert. Is the Tiger·tec Gold coating beneficial for high-speed operations? Yes, the Tiger·tec Gold coating enhances thermal resistance and wear behaviour, supporting more consistent performance under demanding cutting conditions for this insert. What does the tolerance class M mean for toolholders? Tolerance class M indicates a medium tolerance for seating accuracy, offering a balance between reproducible positioning and ease of handling in standard indexable cutter pockets with the BCMT090308R-G55 WKP35G. Can this insert be used for finishing and roughing? The combination of a 0.8 mm corner radius, robust chip control and the Tiger·tec Gold coating makes this insert suitable for both productive roughing passes and stable finishing operations, depending on the chosen cutting data. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand name Walter Tools) is one of the world’s leading manufacturers of precision cutting tools and forms part of the Sandvik Group. Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the mentioned brands. The offered item is an original, unused product from the manufacturer.
BCMT090308R-G55 WPP35G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and a robust G55 chipbreaker for reliable steel machining and extended tool life; the design supports stable chip control and consistent surface quality. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. BCMT090308R-G55 WPP35G milling insert — Parallelogram 75° form, Tiger·tec Gold by Walter Tools A BCMT090308R-G55 WPP35G indexable milling insert engineered for efficient steel machining, offering a coated carbide grade optimised for productivity and consistent edge performance. Tiger·tec Gold coated carbide technology Optimised for steel (ISO P) Parallelogram 75° insert form 0.8 mm corner radius for stability Consistent productivity through advanced coating and grade The combination of Tiger·tec Gold and the WPP35G grade yields a coated carbide surface engineered for improved wear resistance and predictable edge behaviour under the thermal and mechanical stresses of steel machining. This specification is aligned with ISO P applications and is intended to deliver longer periods between index changes, which translates into higher net machining time and reduced tool inventory turnover. The insert is produced to tolerance class M, ensuring repeatable geometry that supports process stability and consistent part quality across batches. Geometry optimised for chip control and secure cutting The parallelogram 75° form and the G55 chipbreaker work together to control chip formation during interrupted and continuous milling. The insert’s 0.8 mm corner radius provides enhanced edge strength for roughing passes while still permitting acceptable surface finish in semi-finish operations. A 7° relief angle reduces rubbing and helps maintain cutting action, which contributes to lower cutting forces and improved tool life. These geometric choices are designed to reduce vibration and promote reliable performance when paired with suitably rigid toolholders and stable machining parameters. Application focus and measurable benefits in steel machining Designed specifically for steel (ISO P), this insert balances toughness and wear resistance to suit a range of cutting conditions. The WPP35G grade is positioned to handle typical heat and chip formation encountered with unalloyed and alloyed steels; it is therefore effective for both productive roughing and controlled finishing when parameterised correctly. Using this insert in standard milling setups results in improved process reproducibility and a stable cutting edge, making it a pragmatic choice for production environments seeking predictable results and elevated productivity with genuine Walter Tools tooling. Contact Metav Werkzeuge today to discuss suitable toolholder pairings and cutting data for Walter Tools Tiger·tec Gold inserts or to request delivery of genuine BCMT090308R-G55 WPP35G milling inserts Technical Data SKU: BCMT090308R-G55-WPP35G-WALTER Designation: BCMT090308R-G55 ISO designation: BCMT090308R-G55 WPP35G Series: Tiger·tec Gold Grade: WPP35G Manufacturer: Walter Tools Facts Size code: 09 Thickness code: 03 Corner radius: 0.8 mm Relief angle: 7° Insert form angle: 75° Special features Coated carbide grade WPP35G Chipbreaker: G55 Intended material group: steel (ISO P) Tolerance class: M Form: Parallelogram 75° Execution: T FAQ What materials is this insert designed for? The BCMT090308R-G55 WPP35G insert is formulated for steel machining (ISO P) and is suitable for a range of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit performance? The Tiger·tec Gold coating on the WPP35G grade improves wear resistance and thermal stability, extending effective cutting life and supporting consistent edge behaviour during steel machining. What does the G55 chipbreaker do? The G55 chipbreaker is designed to control chip shape and evacuation, improving surface finish and reducing the risk of chip-related damage in many milling conditions. Is the 0.8 mm corner radius suitable for finishing passes? A 0.8 mm corner radius provides enhanced edge robustness for productive cutting; it can be used for semi-finishing and certain finishing operations depending on feed and depth of cut. Which designation should be specified when ordering? Specify BCMT090308R-G55 WPP35G and the SKU BCMT090308R-G55-WPP35G-WALTER to ensure the correct Tiger·tec Gold insert and grade are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names are used solely for explanation and reference. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com