Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
BCMT090308R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
High thermal resistance and stable chip control enable reliable machining of stainless steels and heat‑resistant superalloys; the parallelogram 75° geometry with G55 chipbreaker supports consistent surface finish and extended edge life. Order the BCMT090308R‑G55 WSM45X indexable insert directly via Metav Werkzeuge or consult our technical team for application guidance. BCMT090308R-G55 WSM45X indexable milling insert for stainless steel and superalloys — Walter Tools A BCMT090308R-G55 WSM45X indexable milling insert engineered for demanding applications in stainless steel and heat‑resistant superalloys, combining a coated carbide grade with a chipformer tailored to secure chip evacuation and predictable cutting performance. Coated cemented carbide grade WSM45X Optimised for stainless steel and superalloys Parallelogram 75° insert geometry 0.8 mm corner radius, 7° relief angle Reliable cut chemistry for hard‑to‑machine materials The WSM45X formulation is a coated cemented carbide designed specifically for materials classified in ISO groups M and S. These workpiece groups are prone to work hardening and poor heat dissipation; the coating and carbide matrix together improve thermal resistance and support a stable cutting edge, which reduces the risk of built‑up edge and unplanned rework. Specifying this grade provides a rational increase in process reliability and helps to maintain consistent throughput when machining temperature‑sensitive alloys. Geometry and chip control that maintain productivity The insert’s parallelogram 75° geometry and integrated G55 chipbreaker control chip formation and evacuation under interrupted and continuous cuts. The 0.8 mm corner radius and 7° relief angle balance edge robustness with acceptable surface finish, making the insert suitable for light to medium engagement cuts where edge stability matters. By reducing edge failure and improving chip flow, the geometry contributes directly to higher machine uptime and lower tooling consumption per finished component. Practical integration and predictable results in production The BCMT090308R form conforms to widely used indexable insert standards and fits toolholders designed for BCMT‑style inserts, enabling straightforward integration into existing machining setups. The combination of coated carbide and dedicated chip geometry yields repeatable performance across batch runs, supporting tighter process windows and reduced scrap. For workshop managers and process engineers, that predictability translates into measurable improvements in first‑pass yield and overall cost efficiency. Contact Metav Werkzeuge for specialist advice on Walter Tools BCMT090308R‑G55 WSM45X inserts for demanding stainless‑steel and superalloy milling operations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BCMT090308R-G55-WSM45X-WALTER Designation: BCMT090308R-G55 WSM45X Manufacturer: Walter Tools Product type: Indexable milling insert Core data Relief angle: 7° Corner radius: 0.8 mm Insert size: 09 Thickness code: 03 Tolerance class: M Special features Chipbreaker: G55 Insert shape: Parallelogram 75° Grade: WSM45X (coated cemented carbide) Series: Walter Schneidstoffsorte - Serie offen Suitable for: stainless steel (M), heat‑resistant superalloys and titanium (S) FAQ Which materials are recommended for this insert? The BCMT090308R‑G55 WSM45X insert is recommended for stainless steel (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), where its coated carbide grade supports stable cutting and secure chip formation. What benefit does the G55 chipbreaker provide? The G55 chipbreaker shapes and controls the chips produced during milling, improving chip evacuation and reducing the tendency for recutting, which helps maintain surface quality and edge life for the BCMT090308R‑G55 WSM45X insert. How does the parallelogram 75° geometry affect machining? The parallelogram 75° form offers a favourable combination of cutting direction and edge engagement that supports robust cutting edges and predictable forces, aiding consistent surface finish and tool life in demanding materials. Is this insert suitable for finishing passes? Yes; with its 0.8 mm corner radius and coated carbide grade, the insert can be used for finishing and semi‑finishing operations where edge stability and surface integrity are required. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes and do not indicate any affiliation with our company. The offered item is original, factory‑new goods from the manufacturer.
BCMT090308R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a versatile, PVD-coated grade and a secure parallelogram geometry to achieve consistent milling results across steel, stainless steel and superalloys; order directly via Metav Werkzeuge for advice and fast availability. BCMT090308R-G55 WSP45G milling insert — Parallelogram 75°, Tiger·tec Gold coating — Walter Tools BCMT090308R-G55 WSP45G is a coated carbide indexable insert designed for versatile milling tasks in demanding industrial environments, offering a balance of wear resistance and stable cutting performance for a wide range of materials. Tiger·tec Gold PVD coating for high wear resistance Versatile for steel, stainless and superalloys Parallelogram 75° geometry for secure engagement 0.8 mm corner radius for consistent surface finish Improved productivity through durable coating and material design The Tiger·tec Gold PVD coating combined with the WSP45G grade delivers enhanced wear resistance and predictable flank performance during longer production cycles. As a coated carbide insert, it resists abrasive wear and thermal loads typical of milling steel and tougher alloys, which reduces changeovers and tool consumption. This results in more stable process windows and a reliable balance between cutting life and surface quality. Controlled chip formation for varied workpiece groups Equipped with the G55 chipbreaker, the insert supports secure chip control when machining materials classified under P, M and S. P denotes steels, M covers stainless steels and S includes heat-resistant superalloys and titanium — each group places different demands on chip flow and heat management. The chipbreaker geometry is tailored to promote short, manageable chips and to help maintain a stable cutting edge under variable cutting parameters. Geometry that secures engagement and surface consistency The parallelogram 75° shape provides a robust seating and engagement angle for interrupted cuts and shoulder milling, while the 7° relief angle improves clearance and reduces rubbing. A 0.8 mm corner radius supports consistent surface finish and reduces the risk of edge chipping in semi-finishing operations. Together with a compact plate thickness, these geometric choices help to balance rigidity and edge strength for repeatable results. Practical selection advice for reliable milling operations When specifying this indexable insert, consider the interaction of grade, chipbreaker and geometry with machine power and workholding stability. The BCMT090308R-G55 WSP45G is suitable for applications where a versatile PVD grade and dependable chip control are priorities. If additional process data or parameter recommendations are required, Metav Werkzeuge can provide application support and compatibility guidance to match the insert to the machining scenario. For tailored application advice and stock information contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the BCMT090308R-G55 WSP45G and its suitability for specific milling tasks. Technical data Article number: BCMT090308R-G55-WSP45G-WALTER Designation: BCMT090308R-G55 WSP45G Type: Milling insert Brand: Walter Tools Facts Size: 09 Thickness: 03 Corner radius: 0.8 mm Relief angle: 7° Tolerance class: M Special features Tiger·tec Gold coating (PVD) Grade: WSP45G (coated carbide) Chipbreaker: G55 Geometry: Parallelogram 75° Material suitability: steel (P), stainless steel (M), superalloys/titanium (S) Series: Tiger·tec Gold FAQ What materials is this insert suitable for? The BCMT090308R-G55 WSP45G insert is designed for machining steels (P), stainless steels (M) and heat-resistant superalloys/titanium (S) thanks to the WSP45G grade and Tiger·tec Gold coating. How does the G55 chipbreaker affect machining? The G55 chipbreaker on this milling insert promotes controlled chip formation and evacuation, improving process stability when cutting varied materials. Which geometry advantages does the parallelogram 75° deliver? Parallelogram 75° geometry offers secure seating and a robust entry angle for interrupted cuts, enhancing engagement stability during milling operations. Is the insert suitable for finishing passes? Yes, the 0.8 mm corner radius and the coated grade make the insert appropriate for semi-finishing and finishing operations where a consistent surface finish is required. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter Tools is the brand presentation of Walter AG and is recognised as one of the leading manufacturers of precision tools for metalworking; it is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners and are used here for explanation only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
BCMT090312R-G55 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WKP35G grade for long tool life and stable chip control in steel and cast iron machining; order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. BCMT090312R-G55 WKP35G milling insert — Tiger·tec Gold grade for steel and cast iron | Walter Tools The BCMT090312R-G55 WKP35G is a parallelogram 75° milling insert with a 7° clearance angle, engineered for robust performance in steel and cast iron machining. Tiger·tec Gold coating for extended tool life WKP35G grade optimised for steel and cast iron Parallelogram 75° geometry for secure clamping G55 chipbreaker for stable chip formation Extended tool life through advanced coating technology The Tiger·tec Gold coating brings a measurable improvement in wear resistance and thermal stability, resulting in reduced flank wear and longer productive runs. Designed as a coated carbide grade, the insert resists abrasive action common when machining cast materials and maintains a stable cutting edge when processing a wide range of steels. The outcome is fewer indexings and lower tool-change frequency, which translates directly into increased machine availability and predictable production schedules. Geometry engineered for consistent chip control and repeatability The parallelogram 75° form and 7° clearance provide secure seating in standard milling holders and support stable cutting forces. The G55 chipbreaker is tuned to promote short, controlled chips in both ISO P and ISO K groups, reducing the risk of chip entanglement and improving surface finish consistency. The insert’s 1.2 mm corner radius gives a reliable compromise between edge strength and finished surface quality, particularly in interrupted or semi-finishing passes. Optimised performance for steel and cast iron applications This grade is explicitly formulated for the typical thermal and mechanical demands of steel and cast iron. The substrate and coating combination manage heat generation and offer good resistance to the abrasive nature of cast materials, while the chip geometry supports stable chip formation in a wide range of workpiece compositions. For production environments processing mixed batches of steels and castings, the insert provides an effective balance of productivity and surface integrity. Operational benefits that support productivity and process security Adopting this insert contributes to lower overall process costs through extended edge life and fewer tool changes, helping to maintain cycle times and reduce unplanned downtime. The design supports repeatable clamping and reliable performance under routine shop conditions, which helps to safeguard part quality and reduce rework. Integration into existing tool systems is straightforward, as the geometry matches common indexable milling holders for the BCMT format. For application advice or to order Tiger·tec Gold inserts from Walter Tools, contact Metav Werkzeuge GmbH — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored recommendations and rapid supply. Technical data SKU: BCMT090312R-G55-WKP35G-WALTER Label: Fräswendeschneidplatte BCMT090312R-G55 WKP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger·tec Gold Grade: WKP35G Facts Clearance angle: 7° Corner radius: 1.2 mm Size code: 09 Thickness code: 03 Tolerance class: M Plate form: Parallelogram 75° Special features Coated carbide (Tiger·tec Gold) Chipbreaker: G55 Material groups: P (steel), K (cast iron) Suitable for mixed production of steels and castings FAQ What materials is this insert intended for? The BCMT090312R-G55 WKP35G insert is designed for machining steel and cast iron, reflecting its WKP35G grade and Tiger·tec Gold coating. How does the Tiger·tec Gold coating affect performance? Tiger·tec Gold increases thermal and abrasive wear resistance on the insert, improving tool life and process stability when machining demanding workpiece materials. Which chipbreaker is fitted and what is its benefit? The insert features the G55 chipbreaker, which promotes short, controlled chips and improved surface finish in both P and K material groups. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanation only; there is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
BCMT090312R-G55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and a precise 1.2 mm nose radius to achieve consistent chip control and long tool life in mixed production of steel and cast iron; order original Walter Tools inserts via Metav Werkzeuge or consult our specialists for process optimisation. BCMT090312R-G55 WKP35S milling indexable insert — Tiger·tec Silver, for steel and cast iron — Walter Tools The BCMT090312R-G55 WKP35S is a coated carbide milling insert designed for reliable performance in steel and cast iron machining, offering a balanced geometry for both continuous and interrupted cuts. Tiger·tec Silver coating for high wear resistance Designed for steel and cast iron applications 7° clearance angle with 1.2 mm nose radius Parallelogram 75° form for secure clamping Consistent results for steel and cast iron milling The insert is engineered for machining within the ISO group P (steel) and ISO group K (cast iron), so the cutting-edge behaviour is adapted to typical heat generation and chip formation for these materials. The coated carbide substrate provides a combination of toughness and hardness that maintains cutting performance across varying load conditions. As a result, cycle times become more predictable and tool-change intervals lengthen, which supports continuous production runs and reduces unplanned stoppages. Extended tool life through advanced coating The Tiger·tec Silver coating improves thermal resistance and adhesion, which reduces abrasive wear and prolongs service life under demanding conditions. In practice this means fewer insert changes during a shift and more consistent surface finishes on machined parts. The coating technology also contributes to stable cutting when facing fluctuating cutting parameters, offering a clear productivity advantage for medium to high-volume milling operations. Geometry engineered for secure clamping and accuracy The Parallelogram 75° insert form provides a stable seat in many common milling cutters, improving clamping security and reducing the risk of vibration-induced edge chipping. A 7° clearance angle minimises flank contact while the 1.2 mm nose radius offers a compromise between strength and surface quality: a larger radius increases edge robustness and edge life, while still enabling acceptable component finish in general milling tasks. This geometry supports repeatable dimensional accuracy in serial production. Practical advantages for workshop productivity With the G55 chipbreaker and a medium tolerance class M, the insert controls chip flow and supports efficient evacuation in both steels and cast irons, lowering the likelihood of built-up edge and reducing rework. The design is well suited to typical slotting and face milling passes, where steady chip formation and edge stability translate to fewer interruptions and better overall throughput. For job shops and production environments alike, the result is higher process reliability and measurable time savings per component. Contact Metav Werkzeuge today to secure original Walter Tools BCMT090312R-G55 WKP35S inserts with Tiger·tec Silver coating and get tailored advice for optimising milling processes Technical data Article number / SKU: BCMT090312R-G55-WKP35S-WALTER Product name: BCMT090312R-G55 WKP35S Product type: Milling indexable insert Facts Clearance angle: 7° Nose radius: 1.2 mm Plate size: 09 Plate thickness: 03 Plate form: Parallelogram 75° Special features Coating: Tiger·tec Silver Grade / sort: WKP35S Chipbreaker: G55 Series: Tiger-tec Silver Tolerance class: M Material groups: P (steel), K (cast iron) Manufacturer: Walter Tools FAQ Which materials are recommended for this insert? The BCMT090312R-G55 WKP35S is specified for steel (ISO group P) and cast iron (ISO group K) machining and is optimised for the thermal and abrasive demands of these material groups. What does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP35S grade enhances thermal stability and wear resistance, resulting in longer tool life and more consistent surface quality during milling. What are the key geometry specifications relevant to process setup? This insert has a Parallelogram 75° form, 7° clearance angle and a 1.2 mm nose radius, which together support secure clamping, reduced flank contact and a balance between edge strength and surface finish. Which chipbreaker is fitted and what is its effect? The insert uses a G55 chipbreaker designed to control medium chip flows typical for steel and cast iron, improving chip evacuation and reducing the risk of built-up edge. Is the insert specified for stainless steel machining? Suitability for stainless steel is not indicated for the BCMT090312R-G55 WKP35S; the documented material groups are steel and cast iron only. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT090312R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold PVD coating, versatile P/M/S grade capability and a Parallelogram 75° geometry for secure chip control and consistent tool life; order directly via Metav Werkzeuge or consult the specialists for application support. BCMT090312R-G55 WSP45G milling indexable insert — Walter Tools, Tiger·tec Gold, 7° relief The BCMT090312R-G55 WSP45G is a milling indexable insert designed for robust, multi-material milling of steels, stainless steels and heat-resistant alloys with optimised chip control. Tiger·tec Gold PVD coating for long life Versatile for Steel, stainless steel, superalloys Parallelogram 75° geometry for positive entry Corner radius 1.2 mm for stable cutting edge Reliable edge life and predictable process performance The coated cemented carbide grade in this insert delivers stable cutting-edge behaviour under demanding conditions. With the Tiger·tec Gold technology and the WSP45G grade, the insert is engineered for a balance of toughness and wear resistance, which reduces the risk of unexpected edge failure and supports longer tool life. The G55 chipbreaker promotes controlled chip formation, lowering the chance of built-up edge when machining sticky or ductile materials. These characteristics translate into fewer tool changes, more predictable cycle times and improved overall process economy. Geometry engineered for secure engagement and surface quality The Parallelogram 75° shape combined with a 7° relief angle ensures a positive cutting entry and reduced cutting forces in interrupted or light-approach milling. The modest corner radius (1.2 mm) stabilises the cutting edge, improving surface finish and resisting chipping on heavy cuts. For shops seeking consistent results, this geometry supports conservative cutting strategies that still achieve good removal rates, while helping to maintain dimensional accuracy on finished components. Universal applicability across common industrial materials Designed for ISO material groups P / M / S, the insert is suitable for unalloyed and alloyed steel, stainless steel and heat-resistant superalloys or titanium. The material classification indicates that the grade manages the thermal and mechanical loads typical of each group: controlled wear for steels, secure edge stability for stainless materials prone to work hardening, and thermal resilience for high-temperature alloys. In practical terms, this versatility reduces tooling complexity and inventory, allowing one insert type to cover multiple jobs with predictable machining behaviour. For application guidance or to secure delivery of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored recommendations and order placement via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BCMT090312R-G55-WSP45G-WALTER Product designation: Fräswendeschneidplatte BCMT090312R-G55 WSP45G Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 1.2 mm Geometry: Parallelogram 75° Plate size: 09 Plate thickness: 03 Tolerance class: M Special features Series: Tiger-tec Gold Grade: WSP45G Chipbreaker: G55 Coating: Tiger·tec Gold (PVD) Material suitability: P / M / S (Steel, stainless steel, superalloys/Titanium) Execution: T Label / SKU: BCMT090312R-G55-WSP45G-WALTER FAQ What materials can be machined with this insert? The BCMT090312R-G55 WSP45G is suitable for ISO groups P, M and S — covering steel, stainless steel and heat-resistant superalloys or titanium. Which feature improves chip control during milling? The G55 chipbreaker and the Parallelogram 75° geometry work together to ensure controlled chip formation and secure chip evacuation. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold (PVD) enhances wear resistance and thermal stability, extending the tool life of the BCMT090312R-G55 WSP45G under varying cutting conditions. Is the insert suitable for interrupted cuts or slot milling? The positive entry of the parallelogram geometry and the 7° relief angle make this insert well suited to interrupted cutting applications and slotting scenarios. What does the tolerance class M indicate? Tolerance class M denotes the manufacturing tolerance level for the insert, supporting consistent seating and repeatable positioning in the toolholder. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are used solely for identification and explanation. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of Walter Tools.
BCMT090316R-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, robust parallelogram 75° geometry and the WKP35G grade for stable, productive milling of steel and cast iron; order directly via Metav Werkzeuge or request tailored advice from our consultants. BCMT090316R-G55 WKP35G — Parallelogram milling insert (Tiger·tec Gold) by Walter Tools The BCMT090316R-G55 WKP35G is a Tiger·tec Gold coated parallelogram milling insert designed for efficient roughing and semi-finishing of steel and cast iron in industrial machining. Tiger·tec Gold coating for high tool life WKP35G grade optimised for steel and cast iron Parallelogram 75° geometry for robust milling 7° relief and 1.6 mm corner radius for stability Consistent productivity through advanced coating and grade The combination of the Tiger·tec Gold coating with the WKP35G grade delivers a balance between wear resistance and reliable chip control that supports continuous production cycles. Coated carbide grades of this kind are engineered to withstand the thermal and mechanical demands of machining steel and cast iron, reducing flank wear and extending indexable insert life. For production planners this means fewer tool changes and improved uptime, while procurement benefits from consistent batch-to-batch performance. Geometry that increases process stability and tool life The parallelogram 75° form, together with a 7° relief angle and a 1.6 mm corner radius, provides mechanical strength at the cutting edge and predictable engagement with the workpiece. The chipbreaker G55 is designed to promote controlled chip formation in both short and medium chip lengths, lowering the risk of built-up edge and improving surface quality. As a result, the insert supports heavier cuts when required while maintaining dimensional stability and reducing the likelihood of tool-related interruptions. Clear application range and operational advantages Specified for material groups P (steel) and K (cast iron) according to ISO classifications, the insert suits common workshop and industrial applications where abrasive wear and varying chip forms occur. The tolerance class M and the defined plate dimensions ensure repeatable seating and indexing in standard toolholders. Choosing this grade and geometry helps achieve predictable machining results, simplified tooling logistics and a higher first-pass yield — benefits that matter in volume machining or mixed-production environments. For procurement advice or to discuss application-specific recommendations for Walter Tools Tiger·tec Gold inserts such as the BCMT090316R-G55 WKP35G, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: BCMT090316R-G55-WKP35G-WALTER Article designation: BCMT090316R-G55 WKP35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Plate size: 09 Plate thickness: 03 Corner radius: 1.6 mm Free angle: 7° Plate form: Parallelogramm 75° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: G55 Execution: T Material suitability: P (steel), K (cast iron) FAQ What materials are suitable for this insert? The BCMT090316R-G55 WKP35G is suitable for steel (P) and cast iron (K) applications as specified by the Tiger·tec Gold grade. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WKP35G grade reduces abrasive wear and improves thermal stability for longer tool life and fewer indexable insert changes. Which geometry advantages does the parallelogram 75° provide? The parallelogram 75° shape offers robust cutting engagement and improved strength at the edge, supporting stable milling operations and reliable chip flow. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for clarification only. There is no connection between our company and the named brands. The offered article is original, factory-new merchandise of the manufacturer.
BCMT090316R-G55 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver technology together with a dedicated G55 chipbreaker and a precise 1.6 mm corner radius for stable, repeatable milling results in steel and cast iron; purchase and technical advice are available through Metav Werkzeuge for straightforward integration into production. BCMT090316R-G55 WKP35S – Milling indexable insert with Tiger‑tec Silver coating by Walter Tools A BCMT090316R‑G55 WKP35S milling insert designed for general steel and cast iron machining, offering a parallelogram 75° form with a 7° clearance angle for reliable chip control and long tool life Tiger‑tec Silver coating for extended tool life Optimised G55 chipbreaker for secure chip control Suitable for steel and cast iron machining 7° clearance angle with 1.6 mm corner radius Consistent performance for steel and cast iron milling The BCMT090316R‑G55 WKP35S is configured for high‑productivity cutting of ISO groups P and K, which correspond to steel and cast iron respectively. Its design leverages the Tiger‑tec Silver coating to reduce flank wear and maintain a stable cutting edge under varying thermal loads. For production planners this means fewer insert changes and more predictable process windows, while maintenance teams benefit from extended tool life that supports continuous operation. Secure chip management and edge geometry that reduces rework The G55 chipbreaker is optimised for consistent chip formation in interrupted and continuous cuts, improving evacuation and reducing the risk of built‑up edge. The parallelogram 75° shape, combined with a 7° clearance angle, yields a favourable cutting geometry that balances shear and compressive forces. The 1.6 mm corner radius helps to distribute cutting stresses and enhances surface integrity, lowering the need for secondary finishing operations on many workpiece geometries. Coating and grade advantages explained for practical use The insert’s grade, WKP35S, is a coated carbide variant within the Tiger‑tec Silver series. This coating system is developed to offer resistance to abrasive wear typical of cast materials and the thermal cycling seen when machining steels. In practice, the coating reduces friction at the cutting edge and improves edge retention, which supports higher cutting speeds and, consequently, improved throughput where machine and process parameters allow. Integration, tolerance and application guidance With a tolerance class M and a plate size of 09, this insert suits a broad range of milling holders and standard clamping systems. The execution code T and the designation BCMT090316R‑G55 indicate compatibility with holders designed for negative inserts in indexed milling cutters. Engineers evaluating tooling options will appreciate the predictable fit and repeatability offered by the specified geometry and tolerance, which simplifies fixture setup and replacement routines. For tailored application guidance or to request delivery of Walter Tools' BCMT090316R‑G55 WKP35S, contact Metav Werkzeuge for technical advice and swift dispatch via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical Data Article number: BCMT090316R-G55-WKP35S-WALTER Product designation: BCMT090316R-G55 WKP35S Product type: Milling indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Facts Shape: Parallelogram 75° Clearance angle: 7° Corner radius: 1.6 mm Plate size: 09 Plate thickness: 03 Chipbreaker: G55 Tolerance class: M Execution: T Special features Coating: Tiger‑tec Silver (WKP35S coated carbide) Material groups: P / K (steel, cast iron) Typical applications: General milling of steel and cast iron ISO designation: BCMT090316R-G55 WKP35S FAQ Which materials can be machined with this insert? The BCMT090316R‑G55 WKP35S insert is suitable for steel and cast iron applications (ISO groups P and K), with the WKP35S grade tailored to resist abrasive wear and thermal loads. What role does the G55 chipbreaker play? The G55 chipbreaker ensures controlled chip formation and evacuation during milling, reducing the likelihood of chip packing and improving surface finish when using the BCMT090316R‑G55 WKP35S. How does the Tiger‑tec Silver coating benefit production? The Tiger‑tec Silver coating on the WKP35S grade decreases friction and flank wear, enabling longer tool life and more stable machining processes for the insert. Is the insert suitable for heavy interrupted cuts? The combination of the parallelogram 75° geometry, 1.6 mm corner radius and the WKP35S grade delivers robustness for many interrupted cut scenarios, making the insert a dependable choice for demanding milling operations. What tolerance and fitting should be expected? This insert is supplied to tolerance class M, ensuring consistent fit in standard negative milling holders compatible with the BCMT090316R‑G55 designation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named manufacturers. The offered item is an original, brand‑new product of the manufacturer (Walter Tools).
BCMT090316R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of a coated carbide grade engineered for demanding materials and a parallelogram 75° geometry that supports stable milling and reproducible chip formation; order the BCMT090316R-G55 WSM45X directly via Metav Werkzeuge or contact our consultants for tailored application advice. BCMT090316R-G55 WSM45X indexable milling insert – coated carbide, for stainless steels (Walter Tools) The BCMT090316R-G55 WSM45X is an indexable milling insert designed for reliable machining of stainless steels and heat-resistant superalloys, combining a robust geometry with a specialised chipbreaker for consistent process results Coated carbide WSM45X for tough materials Parallelogram 75° geometry for robust milling 7° relief angle for reliable chip control 1.6 mm corner radius for improved edge strength Optimised for rostfreie Stähle and heat-resistant alloys The insert is based on the WSM45X coated carbide grade, developed for machining stainless steels (ISO group M) and heat-resistant superalloys and titanium (ISO group S). This composition improves thermal resistance and supports secure chip formation, which reduces the risk of built-up edge during long cycles. For users processing challenging materials, the combination of coating technology and substrate hardness leads to more consistent surface finishes and fewer interruptions in production. Stable chip control and machining consistency Equipped with the G55 chipbreaker and a parallelogram 75° cutting edge, the geometry promotes predictable chip flow and reduces vibration sensitivity in shoulder and face milling. The 7° relief angle assists in maintaining a defined cutting edge engagement, while the insert form helps to control chip evacuation in both climb and conventional milling. The result is improved cycle stability and fewer rework operations thanks to constant cutting conditions. Robust edge strength and repeatable tool life A 1.6 mm corner radius increases edge strength for interrupted cuts and heavy engagement, helping to prevent premature edge failure. The insert’s dimensional class and tolerance M ensure repeatable seating and indexing in compatible toolholders, supporting fast tool changes and minimal setup deviation. As part of Walter Tools’ series, the design focuses on durable performance and productivity in industrial milling applications. For reliable machining of stainless steels and superalloys, request the Walter Tools BCMT090316R-G55 WSM45X via Metav Werkzeuge for application support and supply options Technical data Article number: BCMT090316R-G55-WSM45X-WALTER ISO designation: BCMT090316R-G55 WSM45X Product type: indexable milling insert (milling insert) Manufacturer / Brand: Walter Tools Facts Relief angle: 7° Corner radius: 1.6 mm Insert shape: Parallelogram 75° Size code: 09 Thickness code: 03 Special features Carbide grade: WSM45X (coated cemented carbide) Chipbreaker: G55 Series: Walter Schneidstoffsorte - Serie offen Execution: T Tolerance class: M Material suitability: stainless steels (M), heat-resistant superalloys / titanium (S) FAQ What materials is this insert suitable for? The BCMT090316R-G55 WSM45X insert is specified for stainless steels and for heat-resistant superalloys and titanium; the WSM45X grade supports secure chip formation in these groups. How does the G55 chipbreaker affect performance? The G55 chipbreaker on this Walter Tools milling insert promotes controlled chip formation and evacuation, leading to improved process stability during face and shoulder milling. Can the insert handle interrupted cuts? The 1.6 mm corner radius and the robust coated carbide substrate increase edge strength, making the insert suitable for applications with occasional interruptions in the cut. Is the geometry compatible with common 75° toolholders? The parallelogram 75° form and tolerance class M are intended for standard toolholders designed for this insert shape and size code. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are used for descriptive purposes only. The offered item is original, factory-new product of the manufacturer.
BCMT090316R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a robust PVD-coated carbide grade and a geometry designed for stable chip control to keep milling cycles productive and predictable; order original Walter Tools inserts through Metav Werkzeuge or contact our consultants for application advice. BCMT090316R-G55 WSP45G – milling insert for steel, stainless steel and superalloys, Walter Tools The BCMT090316R-G55 WSP45G is a PVD-coated milling insert from the Tiger·tec Gold series, designed for versatile face and shoulder milling of steels, rostfreier Stahl and heat-resistant alloys. Tiger·tec Gold PVD-coated carbide grade WSP45G Suitable for steel, stainless steel and superalloys Parallelogram 75° shape for stable milling 1.6 mm corner radius, 7° clearance angle Consistent performance thanks to Tiger·tec Gold coating The Tiger·tec Gold PVD coating and the WSP45G grade deliver a mix of toughness and abrasion resistance that supports long tool life under varying cutting conditions. This coated carbide composition is formulated to tolerate the heat and abrasive wear typical in milling, which results in more consistent cycle times and fewer tool changes. Because the grade balances toughness and hardness, the insert sustains a stable cutting edge even during intermittent cuts and when machining work-hardened surfaces. The net effect is reduced downtime and improved process reliability for production runs. One geometry for multiple materials – less tool complexity The insert’s specifications align with ISO material groups P / M / S, making it suitable for unalloyed and alloyed steels, stainless steels and high-temperature alloys such as nickel-based superalloys and titanium. Using a single indexable insert across these groups simplifies tooling logistics and reduces inventory. The chipformer G55, together with the grade characteristics, promotes secure chip formation and evacuation; the result is improved surface finish and lower risk of edge build-up when machining demanding materials. Technical customers will appreciate the predictable behaviour across varied batches and the ability to standardise processes. Geometry that enhances stability and seat integrity The parallelogram 75° shape and the specified 1.6 mm corner radius contribute to a secure seat and reliable edge strength during heavy engagement milling. A 7° clearance angle reduces rubbing on the flank, lowering the thermal load on the cutting edge and helping to prevent premature flank wear. These geometric choices translate directly into operational benefits: stronger corners for interrupted cuts, consistent contact with the toolholder for vibration damping, and improved part tolerances under higher feed rates. When paired with the correct cutter body, this insert supports higher metal removal rates without sacrificing accuracy. For tailored application support or to secure original Walter Tools BCMT090316R-G55 WSP45G inserts, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: BCMT090316R-G55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT090316R-G55 WSP45G Walter Tools Manufacturer: Walter Tools Facts Corner radius: 1,6 mm Clearance angle: 7° Plate size: 09 Plate thickness: 03 Tolerance class: M Special features Series: Tiger-tec Gold Grade: WSP45G Chipbreaker: G55 Shape: Parallelogram 75° Material applicability: P / M / S Execution: T FAQ What materials is this insert suited for? The BCMT090316R-G55 WSP45G insert is specified for ISO groups P, M and S, i.e. steels, stainless steels and heat-resistant superalloys. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold PVD coating on the WSP45G grade enhances wear resistance and heat tolerance, which extends tool life and supports consistent milling performance. What is the benefit of the parallelogram 75° shape? The parallelogram 75° geometry provides a stable seat and favourable rake, improving vibration damping and enabling higher feeds with reliable surface quality. Can the insert handle interrupted cuts or heavy engagement milling? Yes, the 1.6 mm corner radius and the WSP45G grade deliver the toughness required for interrupted cuts and robust engagement without rapid edge breakdown. Is this an original Walter Tools product? This is an original, factory-new Walter Tools insert from the Tiger·tec Gold series and is intended for professional machining applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (trading as Walter Tools) is a registered brand. Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
BCMT090320R-G55 WKP35G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WKP35G grade delivers elevated wear resistance and consistent chip control for steel and cast iron machining, while the 75° parallelogram geometry with a 7° relief ensures reliable cutting performance and edge stability; order this insert via Metav Werkzeuge or consult our specialists for application-specific recommendations. BCMT090320R-G55 indexable milling insert BCMT090320R-G55 WKP35G — for steel and cast iron machining by Walter Tools BCMT090320R-G55 WKP35G is an indexable milling insert optimised for productive machining of steels and cast irons, combining the Tiger·tec Gold coating technology with a robust chipbreaker geometry and a 75° parallelogram form. Tiger·tec Gold coating for improved wear resistance Optimised for steel and cast iron machining Parallelogram 75° form with 7° clearance 2.0 mm corner radius for reliable edge strength Consistent productivity through advanced coating technology The Tiger·tec Gold coating embodied in the WKP35G grade provides a hard, wear-resistant surface that reduces abrasive wear and improves thermal stability during cutting. This results in longer tool life and fewer indexings, which in turn lowers process costs and increases uptime. The coated carbide substrate offers predictable performance across a range of cutting conditions, making the insert particularly suitable where repetitive production and stable chip formation are essential. For industrial shops focused on throughput, the coated grade supports more consistent cycle times and fewer unplanned tool changes. Geometry designed for secure cutting and surface quality A 75° parallelogram plate form with 7° relief combines a versatile cutting angle with secure seating in standard milling holders, enabling reliable engagement in a variety of milling operations. The 2.0 mm corner radius enhances edge strength and resistance to chipping, which is beneficial when encountering interrupted cuts or variable feed conditions. The plate thickness and insert size contribute to stiffness and clamping stability, so the machining setup benefits from reduced vibration and improved surface finish. These geometric choices translate into predictable behaviour at the toolholder interface and better reproducibility in serial machining. Effective chip control and material compatibility for broad workshop use The G55 chipbreaker is tuned for the machining behaviour of steel (P) and cast iron (K) as defined by ISO 513, promoting short, controlled chips and reducing the risk of built-up edge. This targeted chip control enhances surface integrity and minimises operator intervention for chip evacuation, particularly in rigid setups and automated operations. The insert’s grade and geometry combination ensures suitability for a wide spectrum of unalloyed and alloyed steels as well as typical cast iron grades, delivering a balance between process security and economical tool life. For tailored advice on feeds and speeds for specific alloys, technical consultation is recommended. Request cutting data and application support from Metav Werkzeuge to specify the BCMT090320R-G55 WKP35G insert and ensure optimal tool selection for the intended steel or cast iron application — Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: BCMT090320R-G55-WKP35G-WALTER Article: BCMT090320R-G55 WKP35G Type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Relief angle: 7° Corner radius: 2.0 mm Insert size: 09 Thickness: 3 mm Tolerance class: M Geometry: Parallelogram 75° Chipbreaker: G55 Materials and features Coating: Tiger·tec Gold (WKP35G) Substrate: coated carbide Suitable for: Steel (P), Cast iron (K) Grade designation: WKP35G Version: T FAQ Which materials is this insert suitable for? The BCMT090320R-G55 WKP35G insert is designed for machining steel (P) and cast iron (K) in accordance with ISO 513, making it suitable for a broad range of unalloyed and alloyed steels and common cast iron grades. What are the benefits of the WKP35G grade and Tiger·tec Gold coating? The WKP35G grade, utilising Tiger·tec Gold technology, combines a wear-resistant coating with a carbide substrate to improve thermal and abrasive resistance, resulting in longer tool life and more consistent cutting performance during serial operations. How does the insert geometry affect cutting performance? The 75° parallelogram form and 7° relief provide a versatile cutting angle with secure clamping, while the 2.0 mm corner radius increases edge strength and reduces the likelihood of chipping, supporting stable machining and improved surface finish. What type of chip control does the G55 chipbreaker offer? The G55 chipbreaker is engineered to produce controlled, short chips when machining steels and cast irons, aiding in chip evacuation and reducing built-up edge for improved process reliability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are used for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
BCMT090320R-G55 WKP35S Wendeplatten - Walter Tools
Benefit from a combination of Tiger‑tec Silver coating and the WKP35S grade for extended tool life and consistent performance. The G55 chipbreaker and parallelogram 75° form deliver controlled chip formation when machining steel and cast iron, improving cycle stability. Order the BCMT090320R-G55 WKP35S via Metav Werkzeuge or consult our technical team for application-specific guidance. BCMT090320R-G55 WKP35S indexable milling insert — Tiger‑tec Silver, G55 chipbreaker, Walter Tools A precision indexable milling insert, the BCMT090320R-G55 WKP35S is engineered for productive face and profile milling of steel and cast iron, combining a coated carbide grade with a robust insert geometry Tiger·tec Silver coated carbide grade WKP35S Optimised G55 chipbreaker for stable chips Parallelogram 75° form for secure cutting action Suitable for steel (P) and cast iron (K) machining Increased productivity through proven coating and grade The combination of Tiger‑tec Silver coating and the WKP35S carbide grade provides a balance between wear resistance and toughness, which translates into longer cutting edge life and fewer tool changes. This coating technology is designed to resist abrasive wear common when machining cast iron, while the grade maintains edge stability when cutting various steel alloys. As a result, production runs become more predictable and downtime for tool changeovers is reduced, improving overall throughput. Reliable chip control for consistent surface quality The G55 chipbreaker geometry is optimised to control chip shape and evacuation during milling of both steel and cast iron, reducing the risk of built-up edge and improving surface finish. The insert’s parallelogram 75° form contributes to a secure cutting engagement and distributes cutting forces evenly, which supports stable machining at higher feed rates. Clear chip formation reduces interruptions and helps maintain consistent dimensional accuracy on workpieces. Geometry and tolerance that support process stability With a defined relief of 7° and a corner radius of 2 mm, this insert offers a predictable cutting edge performance that suits finishing and semi-finishing operations. The parallelogram shape provides flexibility in toolholder setups and enhanced robustness against edge chipping. Tolerance class M ensures repeatable geometry across batches, enabling reliable toolpath planning and reproducible results in serial production environments. Practical advantages for workshop integration The insert is part of the Tiger‑tec Silver series and fits common toolholders that accept BCMT‑style cartridges, facilitating quick retrofitting into existing tooling systems. The coated carbide construction reduces maintenance intervals and supports higher cutting speeds where the process allows, contributing to better utilisation of machining centres. Technical documentation and data sheets from Walter Tools support process parameter selection for different steel grades and cast iron types. For robust milling with Walter Tools' Tiger‑tec Silver grade, contact Metav Werkzeuge for tailored application advice and fast delivery — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical data Article number: BCMT090320R-G55-WKP35S-WALTER Designation: BCMT090320R-G55 Full designation: BCMT090320R-G55 WKP35S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Facts Relief angle: 7° Corner radius: 2 mm Insert size: 09 Plate thickness: 03 Tolerance class: M Special features Coating: Tiger‑tec Silver (coated carbide) Chipbreaker: G55 Form: Parallelogram 75° Execution: T Material suitability: Steel (P) and Cast iron (K) Product type: Indexable milling insert FAQ What materials is this insert designed to machine? The BCMT090320R-G55 WKP35S is optimised for steel (P) and cast iron (K) applications according to its WKP35S grade and Tiger‑tec Silver coating. How does the G55 chipbreaker benefit milling operations? The G55 chipbreaker ensures controlled chip formation and reliable evacuation, which improves surface finish and reduces interruptions during milling of both steel and cast iron. Is the insert suitable for finishing and semi-finishing? Yes, with a 2 mm corner radius and 7° relief, the insert supports finishing and semi-finishing passes while offering edge stability for consistent results. Which toolholders are compatible with this insert style? The BCMT geometry is widely used in indexable milling assemblies; the parallelogram 75° shape provides flexible mounting options in standard BCMT-compatible toolholders. What advantages does the Tiger‑tec Silver coating provide? Tiger‑tec Silver coating on the WKP35S grade enhances wear resistance and edge strength, extending tool life under typical steel and cast iron cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original factory-new goods of the manufacturer. Walter Tools is a brand of the Walter AG group, a leading manufacturer of precision cutting tools.
BCMT090320R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
Benefit from a combination of high process reliability and stable chip control thanks to the WSM45X grade and the chipbreaker G55; order the insert directly via Metav Werkzeuge or consult our team for application advice. BCMT090320R-G55 WSM45X indexable milling insert by Walter Tools — suited for rostfreier Stahl and heat-resistant superalloys The BCMT090320R-G55 WSM45X is an indexable milling insert engineered for demanding machining of rostfreier Stahl and heat-resistant superalloys, offering stable cutting edges and controlled chip formation. Coated carbide grade WSM45X Optimised chip control with G55 breaker Parallelogram 75° for axial stability 7° relief and 2 mm corner radius Precise cutting for demanding materials that reduces downtime The WSM45X grade is a coated carbide developed for components that challenge tool life, particularly rostfreier Stahl and superalloys. Its composition and coating focus on thermal resistance and edge stability, which translates to longer cutting intervals and fewer tool changes. The integrated chipbreaker G55 supports consistent chip formation, reducing the risk of built-up edge and keeping toolpaths predictable. For shops striving for steady throughput, this means less unplanned downtime and improved overall productivity. Geometry that delivers stable performance and predictable results The insert’s parallelogram 75° shape and 7° relief provide a reliable contact geometry that helps maintain axial stability during milling cycles. A 2 mm corner radius balances edge strength with acceptable cutting forces, making the geometry suitable for medium to heavy roughing passes as well as finishing when specified feeds and speeds are applied. Explained simply: the form of the insert reduces vibration and protects the cutting edge, which benefits surface finish and dimensional repeatability in serial production. Practical advantages for workshop integration and process safety This insert is classified for ISO material groups S and M — S for heat-resistant superalloys and titanium, M for rostfreier Stahl — indicating a wide capability in modern machining environments where mixed-material batches are common. The coated carbide and chip control features provide a combination of wear resistance and stable swarf evacuation, supporting both safety and economy in production. For engineers and production managers, this means predictable tool life, fewer interruptions, and easier process planning without resorting to overly specialised tool inventories. Contact Metav Werkzeuge for tailored application support or to request a technical quote for Walter Tools inserts like the BCMT090320R-G55 WSM45X Technical data Article number: BCMT090320R-G55-WSM45X-WALTER SKU: BCMT090320R-G55-WSM45X-WALTER Type: Indexable milling insert Designation: BCMT090320R-G55 WSM45X Manufacturer: Walter Tools Facts Grade / sort: WSM45X Material groups: S / M Relief angle: 7° Corner radius: 2 mm Insert form: Parallelogram 75° Chipbreaker: G55 Insert size: 09 Thickness: 03 Tolerance class: M Special features Coated carbide cutting material Suitable for rostfreier Stahl and superalloys Series: Walter Schneidstoffsorte - Serie offen Stable edge and optimised chipformer Axial stability for interrupted and continuous cuts FAQ What materials is this insert designed for? The BCMT090320R-G55 WSM45X insert by Walter Tools is specified for machining rostfreier Stahl (ISO group M) and heat-resistant superalloys/titanium (ISO group S), offering thermal stability and controlled chip formation. How does the G55 chipbreaker affect performance? The G55 chipbreaker on the insert guides swarf formation for safer evacuation and reduced built-up edge; on the BCMT090320R-G55 WSM45X this results in more consistent tool life and fewer interruptions during long runs. Can this insert be used for finishing passes? Yes — with the insert’s parallelogram 75° geometry, 7° relief and 2 mm corner radius, light finishing cuts are feasible when compatible feeds and speeds are applied; the geometry prioritises edge stability and surface quality. Is the WSM45X grade suitable for high-temperature cutting? The WSM45X coated carbide is formulated for improved heat resistance and a stable cutting edge, making it appropriate for elevated cutting temperatures encountered with rostfreier Stahl and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT090320R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold PVD coating and the robust parallelogram geometry for stable cutting in demanding materials such as Stahl, rostfreier Stahl and high-temperature alloys; the result is improved process security and predictable tool life. Order directly via Metav Werkzeuge or consult the team for tailored application advice. BCMT090320R-G55 WSP45G milling insert by Walter Tools — Tiger·tec Gold, versatile for Stahl, rostfreier Stahl and superalloys BCMT090320R-G55 WSP45G is a precision milling insert designed for productive face and shoulder milling in a wide range of materials, combining a PVD-hardened grade with a robust parallelogram geometry for reliable chip control. Tiger·tec Gold PVD coating for edge stability Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 75° geometry for flexible cutting 7° clearance and 2 mm corner radius for strength Predictable performance in demanding materials The Tiger·tec Gold coating in this grade provides a balanced combination of heat resistance and edge toughness, which supports a controlled wear behaviour when machining Stahl and rostfreier Stahl. The PVD-coated cemented carbide substrate reduces built-up edge and improves resistance to thermal loading; as a result, machining cycles become more reproducible and less dependent on constant tool change. This reliability translates into higher machine utilisation and fewer unscheduled interventions, an advantage for production environments that demand consistent component quality. Stable cutting edge and improved tool life Thanks to the WSP45G cutting grade, the insert offers improved chip formation and a stable cutting edge under mixed-cutting conditions. The rounded 2 mm corner radius and the 7° clearance angle together enhance resistance to chipping while maintaining acceptable cutting forces, which is particularly beneficial for interrupted cuts or variable engagement. The combination of geometry and coating helps to extend the usable life of the insert and to reduce cutting-edge failures, supporting efficient batch production and predictable tool replacement intervals. Geometry designed for versatile milling operations The parallelogram 75° shape provides flexibility for different milling strategies, enabling both conventional and climb milling with effective shear conditions. The insert size and 3 mm thickness give a robust mounting face and support higher axial depths of cut, while the specific chipbreaker (G55) assists in producing manageable swarf across a wide material spectrum. For shops looking to streamline tooling families, a single insert grade that covers Stahl, rostfreier Stahl and heat-resistant alloys reduces the need for frequent tool changes and simplifies inventory. Practical benefits for process security and cost-effectiveness Adopting this indexable insert supports a rational approach to machining: lower scrap risk through consistent surface finish, fewer tool interventions thanks to edge stability, and simplified logistics with a versatile grade. The insert is suitable for applications where process reliability and repeatable results are prioritized over maximum cutting speed, making it a pragmatic choice for a broad range of milling tasks in jobshops and production cells alike. Contact Metav Werkzeuge for an application consultation on the BCMT090320R-G55 WSP45G insert or to check compatibility with specific machine setups and workpiece materials Technical data Article number / SKU: BCMT090320R-G55-WSP45G-WALTER Designation: BCMT090320R-G55 ISO designation: BCMT090320R-G55 WSP45G Manufacturer: Walter Tools Numbers / Core technical data Insert size: 09 Thickness: 03 Corner radius: 2 mm Clearance angle: 7° Plate form: Parallelogram 75° Tolerance class: M Designs / Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated cemented carbide) Chipbreaker: G55 Applicable materials: Stahl, rostfreier Stahl, superalloys and Titanium Execution: T (insert style / seat type) FAQ What materials is the BCMT090320R-G55 WSP45G suitable for? The BCMT090320R-G55 WSP45G insert is formulated for machining Stahl, rostfreier Stahl and heat-resistant alloys such as superalloys and Titanium, offering balanced wear resistance and edge stability. How does the Tiger·tec Gold coating benefit milling operations? Tiger·tec Gold on this insert improves thermal resistance and reduces adhesive wear, resulting in a more stable cutting edge and longer effective tool life during challenging milling operations. What is the advantage of the parallelogram 75° geometry? The parallelogram 75° shape provides flexibility in milling strategies, enabling effective chip shear and adaptable engagement conditions for various face and shoulder milling tasks. Can this insert handle interrupted cuts and variable engagement? Yes, the combination of a 2 mm corner radius and 7° clearance enhances resistance to chipping, making the insert suitable for interrupted cuts and variable engagement scenarios. Which chipformer does this insert use and what is its effect? The insert features the G55 chipbreaker, which supports consistent chip control across a broad range of materials, aiding in process stability and efficient swarf evacuation. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen belongs to the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is an original, brand-new product from the manufacturer.
BCMT120404L-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold grade and the optimised G55 chipbreaker for long tool life and reliable chip control; the parallelogram 75° form and 7° clearance provide consistent seating and fine surface quality in steel and cast iron machining. Order directly via Metav Werkzeuge or consult our team for application advice. BCMT120404L-G55 WKP35G indexable milling insert, Tiger‑tec Gold grade, for steel and cast iron — Walter Tools The BCMT120404L-G55 WKP35G is a coated indexable milling insert designed for high‑productivity finishing and medium‑duty roughing applications in steel (P) and cast iron (K) materials Tiger‑tec Gold coating for high productivity Optimised G55 chipbreaker for controlled chips Parallelogram 75° form for secure seating 0.4 mm corner radius for improved surface finish Extended productive runtime with Tiger‑tec Gold The combination of Tiger‑tec Gold technology and the WKP35G coated carbide substrate improves resistance to abrasive wear and reduces flank wear, which translates into longer tool life and fewer index changes on the machine. In practice, this means less downtime and a more predictable production rhythm when machining steel and cast iron according to ISO 513 classifications. The specification balances coating performance and substrate toughness so the insert performs consistently under the thermal and mechanical loads typical for these material groups. Predictable chip formation and improved surface quality The dedicated G55 chipbreaker is engineered to produce short, controlled chips that evacuate reliably in interrupted cuts and conventional milling passes, enhancing process stability. The 0.4 mm corner radius together with the 7° clearance angle helps to reduce cutting forces and to promote a smooth surface finish on machined components. For users unfamiliar with chipbreaker design: the profile modifies the way material fractures and curls at the cutting edge, which directly affects chip length, heat distribution and the resulting component quality. Geometry and tolerance for repeatable seating and accuracy The parallelogram 75° insert form provides a positive seating geometry in compatible cutters, ensuring secure clamping and straightforward indexing. The tolerance class M indicates the manufacturing precision of the insert, supporting repeatable positioning and consistent cutting performance across production batches. With a compact plate size and a robust design, this insert is suitable for operations where both process stability and cost‑effective performance are required in series production environments. For robust, high‑productivity milling with reliable chip control, specify Walter Tools Tiger‑tec Gold inserts and contact Metav Werkzeuge for tailored recommendations and availability Technical Data Article number: BCMT120404L-G55-WKP35G-WALTER Designation: BCMT120404L-G55 WKP35G Product type: Indexable milling insert Manufacturer: Walter Tools Facts Plate size: 12 mm Plate thickness: 04 Clearance angle: 7° Corner radius: 0.4 mm Plate form: Parallelogram 75° Tolerance class: M Special features Grade: WKP35G (coated carbide) Coating family: Tiger‑tec Gold Chipbreaker: G55 Material suitability: P (steel), K (cast iron) Execution: T FAQ Which materials are suitable for this insert? The BCMT120404L‑G55 WKP35G is designed for machining steel (P) and cast iron (K), with the Tiger‑tec Gold grade optimised for the thermal and abrasive conditions typical of these groups. What benefit does the G55 chipbreaker provide? The G55 chipbreaker promotes short, controllable chips and stable evacuation, which improves process reliability and reduces the risk of chip-related interruptions when using this Walter Tools milling insert. How does the 0.4 mm corner radius affect the result? A 0.4 mm radius provides a balance between edge strength and fine surface finish, helping to lower cutting forces and produce a smoother component surface in finishing passes. Which cutter seat is required for the parallelogram form? The parallelogram 75° geometry requires a matching indexable milling cutter body with a seat designed for BCMT‑style parallelogram inserts to ensure correct clamping and repeatable indexing. What does tolerance class M mean for production? Tolerance class M denotes a medium manufacturing tolerance that supports consistent positioning and is suitable for serial production where repeatability and interchangeability are important. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT120404L-G55 WSP45G Tiger-tec Gold Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the WSP45G grade for reliable chip control and extended edge life; the parallelogram 75° geometry with a 0.4 mm corner radius and 7° relief ensures stable milling across steel, stainless steel and high‑temperature alloys. Order the BCMT120404L‑G55 WSP45G milling insert directly via Metav Werkzeuge or consult our specialists for tailored cutting data. BCMT120404L‑G55 (BCMT120404L‑G55 WSP45G) milling insert — WSP45G grade, for steel, stainless steel and superalloys | Walter Tools The BCMT120404L‑G55 WSP45G is a 75° parallelogram, PVD‑coated milling insert designed for versatile face and shoulder milling across a broad range of materials in industrial production. Tiger‑tec Gold PVD coating WSP45G grade for P / M / S Parallelogram 75° insert form 0.4 mm corner radius, 7° relief Proven coating and grade for consistent productivity The combination of the Tiger‑tec Gold coating with the WSP45G carbide grade provides a balance between wear resistance and edge toughness, tailored for milling. This engineered coating reduces abrasive wear and supports a stable cutting edge under typical heat and load conditions when machining steel, stainless steel and superalloys. For production environments, the result is predictable tool life and fewer insert changes, which contributes directly to higher machine uptime and lower unit manufacturing costs. Geometry that reduces cutting forces and improves surface finish The insert’s parallelogram 75° form and 7° relief angle alter the cutting engagement to lower radial forces and improve chip flow. The small 0.4 mm corner radius is optimised for general milling tasks where a balance between strength and surface quality is required. The integrated G55 chipbreaker supports controlled fragmenting of swarf, reducing the risk of built‑up edge and supporting consistent surface finishes during continuous milling operations. Application guidance for reliable process implementation This milling insert is specified for a broad ISO material range P / M / S, meaning it is suitable for unalloyed and alloyed steels, stainless steel and heat‑resistant alloys including titanium grades. In practice, the insert performs well in shoulder and face milling operations and is compatible with standard toolholders accepting BCMT‑style inserts. For exact cutting data and optimal feeds and speeds for a given machine and workpiece, technical consultation is recommended to ensure process security and tool performance. Practical advantages for workshop and production workflows Using a coated, versatile grade such as WSP45G reduces the need for multiple specialised inserts, simplifying tool inventory and preparation. The insert’s geometry and chip control deliver steady metal removal rates and reproducible component quality across batches. For operations aiming to improve productivity and maintain consistent surface integrity, this solution supports both short‑run flexibility and long‑run stability, making it suitable for job‑shop as well as production‑line settings. Contact Metav Werkzeuge for tailored cutting recommendations and to source Walter Tools Tiger‑tec Gold inserts such as the BCMT120404L‑G55 WSP45G for reliable milling performance Technical data Article number / SKU: BCMT120404L-G55-WSP45G-WALTER Designation: BCMT120404L‑G55 WSP45G Product type: milling insert Series: Tiger‑tec Gold Facts Free angle: 7° Corner radius: 0.4 mm Insert form: Parallelogram 75° Plate size: 12 Thickness code: 04 Tolerance class: M Special features Grade: WSP45G Chipbreaker: G55 Coating: Tiger‑tec Gold (PVD) Material suitability: P / M / S (steel, stainless steel, superalloys) Execution: T Manufacturer: Walter Tools FAQ What materials can be machined with this insert? The BCMT120404L‑G55 WSP45G milling insert is suitable for ISO groups P, M and S, meaning it is designed for machining steel, stainless steel and heat‑resistant superalloys. Which applications suit this insert best? Typical uses include face milling and shoulder milling where the parallelogram 75° form and G55 chipbreaker support stable chip control and consistent surface quality with the BCMT120404L‑G55 WSP45G. How does the Tiger‑tec Gold coating benefit production runs? The Tiger‑tec Gold coating on this insert reduces abrasive wear and helps maintain a stable cutting edge, improving tool life and process reliability for runs with the BCMT120404L‑G55 WSP45G. Is this insert compatible with standard BCMT toolholders? Yes, the insert follows the BCMT form factor and is compatible with toolholders designed for BCMT‑style inserts; verify seating and clamping standards before use with the BCMT120404L‑G55 WSP45G. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT120404R-G55 WKP35G Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Gold coating, optimised G55 chip control and a secure 75° parallelogram form for dependable, productive milling; order the insert directly via Metav Werkzeuge or consult our specialists for process alignment. BCMT120404R-G55 WKP35G milling insert — Tiger‑tec Gold grade for steel and cast iron, Walter Tools BCMT120404R-G55 WKP35G is a precision‑geometry milling insert designed for reliable metal removal in production machining of steels and cast irons. Tiger‑tec Gold coating for extended tool life G55 chipbreaker for consistent chip control Parallelogram 75° geometry for secure seating Designed for steel and cast iron machining Longer tool life through advanced coating technology The insert uses the Tiger‑tec Gold coating and the WKP35G coated‑carbide grade to provide improved wear resistance and consistent cutting performance under industrial conditions. This coating system reduces flank and crater wear, enabling longer intervals between indexings and tool changes. For shops prioritising uptime and predictable tool life, the coated grade translates into fewer interruptions and more stable process outputs. The combination of coating and carbide substrate is particularly effective when machining ISO group P (stainless performance adapted for steels) and K materials, where heat and abrasive wear are typical challenges. Stable chip control and repeatable surface quality Designed with the G55 chipbreaker, a 0.4 mm corner radius and a 7° relief angle, the geometry promotes controlled chip formation and evacuation. The 75° parallelogram form ensures positive clamping and repeatable seating in suitable tool holders, reducing micro‑vibration and promoting a consistent surface finish on workpieces. Stable chip breaking reduces the risk of built‑up edge and machine stoppages, which in turn supports higher machining reliability and predictable part quality—key arguments in rational production planning and cost‑efficiency calculations. Broad applicability with production efficiency in mind With an inscribed circle of 12 mm and a plate thickness of 0.4 mm (designation 04), this insert fits common cutting‑tool systems and is suited to both roughing and finishing passes depending on cutting data. The grade’s balance of toughness and wear resistance allows productive cutting across a wide range of steels and cast irons, helping to shorten cycle times without sacrificing tool life. Walter Tools’ established geometry and grade selection support process security and repeatable results in daily workshop operation, delivering practical advantages for contract manufacturers and in‑house production alike. For machining optimisation with Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge for a tailored recommendation and availability details. Technical data Article number: BCMT120404R-G55-WKP35G-WALTER SKU: BCMT120404R-G55-WKP35G-WALTER Designation: BCMT120404R-G55 WKP35G Series: Tiger‑tec Gold Grade: WKP35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte / milling insert Geometry: Parallelogram 75° Relief angle: 7° Chipbreaker: G55 Tolerance class: M Material group indication: P / K Facts Free cutting angle: 7° Corner radius: 0.4 mm Inscribed circle / size: 12 mm Thickness: 0.4 mm Tolerance: M Special features Coating technology: Tiger‑tec Gold Carbide grade: WKP35G (coated carbide) Suitable for: steel (ISO P) Suitable for: cast iron (ISO K) Parallelogram 75° plate form for secure clamping FAQ What materials is this insert suitable for? The BCMT120404R‑G55 WKP35G insert is intended for machining steel (ISO P) and cast iron (ISO K); the WKP35G grade is optimised for these material groups. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold on the WKP35G grade reduces wear and extends tool life, offering more consistent cutting performance and fewer interruptions in serial production. Which chipbreaker is integrated and what does it do? The integrated G55 chipbreaker promotes reliable chip formation and evacuation, improving surface finish and reducing the likelihood of chip‑related stoppages. Is the insert compatible with standard tool holders? The 75° parallelogram form and the BCMT geometry are compatible with common toolholder systems designed for BCMT inserts; check toolholder specifications for secure seating. What does the tolerance class M indicate? Tolerance class M denotes standard manufacturing tolerances for insert dimensions and seating, supporting consistent fit and clamping repeatability. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed under Walter Tools) is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names are stated for explanation purposes only; the offered item is an original, factory‑new product of the manufacturer.
BCMT120404R-G55 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, the G55 chipbreaker for stable chip control and precise geometry for reliable, high‑productivity machining of Stahl; order directly via Metav Werkzeuge or request application advice from our consultants. BCMT120404R-G55 WPP35G – Milling indexable insert, Tiger·tec Gold for Stahl | Walter Tools The BCMT120404R-G55 WPP35G is a precision milling insert designed for productive steel machining, combining a Tiger·tec Gold coating with an optimised G55 chipformer for consistent performance. Tiger·tec Gold coating for high wear resistance Optimised G55 chipbreaker for stable chip control Parallelogram 75° form for secure clamping 7° clearance and 0.4 mm corner radius precision High productivity through enhanced coating technology The insert’s Tiger·tec Gold coating provides a pronounced improvement in wear resistance and thermal stability compared with uncoated grades, enabling higher cutting speeds and longer tool life. As a coated carbide grade, the WPP35G composition is balanced for both toughness and abrasion resistance, which translates into fewer index changes and reduced consumable costs. For manufacturers aiming to increase throughput, the combination of coating and substrate means repeatable performance in a range of Stahl machining tasks. Stable chip control and surface integrity for fewer reworks The dedicated G55 chipbreaker is tuned to produce short, controllable chips when machining Stahl, reducing the risk of chip entanglement and improving process reliability. The insert geometry—a parallelogram 75° form with a 0.4 mm corner radius—supports consistent edge engagement and contributes to a superior surface finish in semi‑finishing and finishing passes. Better chip evacuation and a predictable cutting edge reduce secondary operations and increase first‑pass yields. Robust geometry and tolerance for secure production runs With a 7° clearance angle and tolerance class M, this indexable insert is manufactured to deliver repeatable seating and stable cutting conditions in standard toolholders. The specified dimensions and form ensure precise clamping and alignment, which minimises vibration and extends the life of both the insert and the holder. These geometrical benefits lead to lower machine downtime and steady process capability across batch and serial production. Versatile application and process efficiency Engineered for Stahl group materials, the WPP35G grade is suitable across a wide hardness and alloy spectrum commonly encountered in industrial production. The insert’s balanced toughness and wear resistance make it a good choice for mixed production environments where a single grade must handle varied components. For bespoke process windows or to optimise cutting data for specific steels, consultation is recommended to maximise productivity while maintaining component quality. Contact Metav Werkzeuge for tailored application advice and to arrange supply of Walter Tools BCMT120404R-G55 WPP35G inserts; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: BCMT120404R-G55-WPP35G-WALTER Name: BCMT120404R-G55 WPP35G Product type: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 7° Corner radius: 0.4 Size: 12 Thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold (coated carbide) Grade: WPP35G Chipbreaker: G55 Plate form: Parallelogramm 75° Execution: T Material application: P (Stahl) FAQ What materials is this insert designed for? The WPP35G grade is specified for the machining of Stahl (group P), covering unalloyed and alloyed steels with a focus on reliable chip control and edge life. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the BCMT120404R-G55 WPP35G increases wear resistance and thermal stability, supporting higher cutting speeds and longer service life compared with conventional uncoated carbides. Why is the G55 chipbreaker important for production? The G55 chipbreaker provides optimised chip formation for Stahl, producing short, manageable chips and improving process stability which reduces the likelihood of machine interruptions. Is the insert suitable for finishing operations? Yes, the combination of the 0.4 mm corner radius and precise geometry supports good surface quality in finishing passes while retaining robustness for semi‑finishing applications. What are the key geometric specifications to check before setup? Confirm the parallelogram 75° form, 7° clearance angle and the insert dimensions (size 12, thickness 04) to ensure correct seating and clamping in the toolholder. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
BCMT120404R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD coating, a reliable WSP45G cutting grade and the parallelogram 75° geometry for consistent edge life and reproducible surface quality; order via Metav Werkzeuge or consult the technical team for application advice. BCMT120404R-G55 WSP45G milling insert — Tiger·tec Gold PVD, parallelogram 75° — Walter Tools The BCMT120404R-G55 WSP45G is a PVD-coated milling insert engineered for versatile milling of steel, rostfreier Stahl and heat-resistant alloys, offering stable cutting edges and dependable chip control in mixed-production environments. Tiger·tec Gold PVD coating for edge stability Multi-material: Steel, stainless and superalloys Parallelogram 75° form for precise engagement Corner radius 0.4 mm for reliable surface finish Increased throughput through stable edge performance The Tiger·tec Gold series and the WSP45G grade deliver a combination of wear resistance and toughness that supports higher productivity and consistent component quality. The PVD coating reduces flank wear and helps to maintain a stable cutting edge in interrupted cuts and variable batch work. With a tolerance class M, the insert provides repeatable geometric accuracy, which reduces part rework and downtime, thereby improving process efficiency on milling operations for unalloyed and alloyed steels. Broad application range with predictable chip control Designed for machining groups P, M and S, this insert handles a wide material spectrum from conventional steel to rostfreier Stahl and heat-resistant superalloys or titanium, where thermal loads are high. The integrated chipbreaker G55 supports controlled chip formation and evacuation, which lowers the risk of built-up edge and enhances surface finish. The result is fewer machining interruptions and more predictable cycle times, especially valuable in job shops and mixed-production lines. Geometry that improves accessibility and surface quality The parallelogram 75° plate form and the modest 7° relief angle ensure secure engagement and flexible approach angles in multi-axis milling. The corner radius 0.4 mm helps produce a consistent surface finish while offering strength at the cutting edge for roughing and semi-finishing passes. A plate size of 12 with thickness code 04 supports a balance between rigidity and chipflow, enabling reliable performance in both conventional and modern high-feed strategies. Contact Metav Werkzeuge today for tailored application recommendations or to secure delivery of Walter Tools inserts for your production requirements Technical Data Article number: BCMT120404R-G55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT120404R-G55 WSP45G Walter Tools Manufacturer: Walter Tools Facts Relief angle: 7° Corner radius: 0.4 mm Insert form: Parallelogram 75° Insert size: 12 Thickness code: 04 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: G55 Applicable materials: P / M / S Execution: T FAQ Which materials can be machined with this insert? The BCMT120404R-G55 WSP45G insert is suitable for machining steels (P), rostfreier Stahl (M) and heat-resistant superalloys or titanium (S), as the WSP45G grade is designed for high thermal loads and stable chip formation. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating offers improved wear resistance and edge stability, which helps maintain consistent cutting performance and reduces the frequency of index changes. How does the parallelogram 75° form affect milling? The parallelogram 75° form provides favourable entry and exit angles for milling, improving accessibility in complex geometries and delivering stable engagement for repeatable surface quality. Is the corner radius suitable for finishing? With a corner radius of 0.4 mm, the insert balances edge strength and surface finish, making it appropriate for semi-finishing and certain finishing passes depending on process parameters. What is the role of the chipbreaker G55? The G55 chipbreaker is optimised for controlled chip formation across a range of materials, aiding evacuation and reducing the risk of built-up edge during interrupted cuts. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not indicate any formal connection between Metav Werkzeuge and the manufacturers. The offered item is an original, factory-new product of Walter Tools.
BCMT120408L-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WKP35G grade for extended tool life and consistent chip control in steel and cast‑iron milling; order directly via Metav Werkzeuge or contact the consultants for cutting‑data support. BCMT120408L-G55 WKP35G milling insert — Parallelogram 75°, Tiger‑tec Gold, Walter Tools The BCMT120408L-G55 WKP35G is a precision milling insert designed for productive operations in steel and cast iron, offering a robust coated‑carbide grade and a parallelogram 75° geometry for versatile toolpath access Tiger‑tec Gold coating, WKP35G grade Optimised for steel and cast iron (P / K) Parallelogram 75° geometry for versatile milling 0.8 mm corner radius and 7° clearance Longer productive life through Tiger‑tec Gold coating and WKP35G The combination of Tiger‑tec Gold coating and the WKP35G grade gives a high level of wear resistance and stable chip formation, which translates into fewer indexings and more time on the workpiece. The coated carbide construction is engineered to withstand the heat and abrasion typical when machining steel and cast iron, so the tool maintains cutting edge integrity for longer. For workshops seeking predictable performance, this results in lower tooling costs per part and reduced setup interruptions. Geometry and edge design that improve process stability The parallelogram 75° shape and a 0.8 mm corner radius balance strength and accessibility: the geometry permits tight approach angles while the moderate radius provides edge support for interrupted cuts and shoulder milling. A 7° clearance reduces flank rubbing and helps maintain surface finish under varying radial engagements. The insert’s G55 chip‑breaker is optimised for controlled chip formation in the P and K material groups, reducing the risk of built‑up edge and improving surface consistency on each pass. Practical advantages for shop-floor efficiency and application range Rated for the ISO P and K groups, this insert covers a broad spectrum of common steels and cast irons, making it suitable for both jobbing and serial production. The M tolerance class supports repeatable seat fit and consistent results during index changes. By choosing a hardened, coated grade designed for real‑world conditions, machining processes gain in process security and predictability, which in turn supports shorter cycle times and steadier part quality. If further data is required for specific feeds and speeds or machine setups, competent advice is available from Metav Werkzeuge to match cutting data to individual production conditions. For tailored cutting data, availability or to discuss integration of Walter Tools Tiger‑tec Gold inserts into current processes, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — for expert consultation and order support Technical data Article number: BCMT120408L-G55-WKP35G-WALTER Designation: BCMT120408L-G55 WKP35G Product type: milling insert (Fräswendeschneidplatte) Brand: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Core data Corner radius: 0.8 mm Clearance angle: 7° Insert size: 12 Thickness code: 04 Special features Coating: Tiger‑tec Gold Chip breaker: G55 Material applicability: Steel (P), Cast iron (K) Geometry: Parallelogram 75° Tolerance class: M Execution: T FAQ Which materials is this insert suitable for? The BCMT120408L-G55 WKP35G insert from Walter Tools is specified for ISO groups P and K, making it suitable for machining a wide range of steel grades and cast iron components. What benefit does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WKP35G grade enhances wear resistance and thermal stability, which extends the insert’s life and improves consistency in repeatable milling operations. For which milling operations is the parallelogram 75° geometry best used? Parallelogram 75° geometry offers versatile approach angles for face and shoulder milling, enabling better access in tight features while maintaining a strong cutting edge. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength for interrupted cuts and contributes to improved corner durability without excessively increasing cutting forces. What role does the G55 chip breaker play in chip control? The G55 chip breaker is designed to produce short, controllable chips in both steel and cast iron, reducing the risk of entanglement and improving surface finish stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. No association between our company and the named brands exists. The offered article is an original, brand‑new product of the manufacturer.
BCMT120408L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of proven edge stability, broad material versatility and the productivity gains of a Tiger·tec Gold grade for smoother milling cycles; order through Metav Werkzeuge or consult the team for application-specific recommendations. BCMT120408L-G55 WSP45G indexable milling insert — Walter Tools, Tiger·tec Gold, P/M/S grade The BCMT120408L-G55 WSP45G is a Tiger·tec Gold PVD-coated indexable insert designed for reliable milling across steels, stainless steels and heat-resistant alloys. Tiger·tec Gold coating for extended life Suited to steel, stainless steel and superalloys Parallelogram 75° shape for axial milling 0.8 mm corner radius for robust edge strength Proven coating for longer productive tool life The Tiger·tec Gold coating is a PVD-backed technology that improves wear resistance and thermal stability. As a result, the insert sustains cutting-edge integrity for longer periods, which translates into fewer tool changes and higher overall productivity. This grade is particularly effective where heat generation and abrasive wear limit performance, making it a sensible choice for high-demand milling tasks. Broad material capability reduces tool inventory Rated for P/M/S groups, the insert handles unalloyed and alloyed steel, stainless steel and superalloys/titanium. The WSP45G grade delivers a balance between toughness and hardness, supporting secure chip formation and reducing built-up edge when machining sticky or heat-prone materials. The G55 chipbreaker optimises chip control, aiding process stability and improving surface quality on the finished component. Geometry tuned for stability and surface finish The parallelogram 75° format with a 7° clearance angle offers a controlled engagement for axial milling operations, promoting consistent cutting forces and tool life. The 0.8 mm corner radius provides a reinforced cutting edge that resists chipping and improves part finish where light radii are required. The insert’s geometric choices support repeatable results in both semi-finish and finishing passes. Application guidance for reliable results This insert is suitable for a wide range of milling strategies where durability and predictable wear behaviour are priorities. The PVD-coated grade and chipbreaker combination enable efficient material removal with a focus on process reliability — a rational choice for shops seeking to lower downtime and increase output consistency. For specific cutting data and optimal parameter windows, consult Metav Werkzeuge’s technical advisors to match the insert to machine capabilities and workpiece conditions. For precise selection advice and fast delivery of Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge — the team will assist with application matching and availability information. Technical data Article number: BCMT120408L-G55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT120408L-G55 WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Execution: T Core data Insert size: 12 Thickness: 04 Clearance angle: 7° Corner radius: 0.8 Tolerance class: M Materials & features Applicable material groups: P / M / S Chipbreaker: G55 Shape: Parallelogram 75° Sort description: PVD-coated carbide, tough, versatile for milling FAQ What materials is this insert suitable for? The BCMT120408L-G55 WSP45G insert is specified for P/M/S materials — that is, steel, stainless steel and superalloys/titanium — providing a versatile solution for mixed production. How does the Tiger·tec Gold coating help in milling? Tiger·tec Gold (PVD) on this Walter Tools grade enhances wear resistance and thermal stability, which supports longer cutting life and more consistent component quality when using the BCMT120408L-G55 WSP45G. What is the benefit of the G55 chipbreaker? The G55 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of built-up edge and improving surface finish during both roughing and finishing operations with this insert. Which operations suit the parallelogram 75° geometry? The parallelogram 75° shape of the insert favours axial engagement and stable cutting forces, making it well suited to face and light shoulder milling where predictable tool behaviour is required. Manufacturer/Responsible: Walter Tools; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the trademark owners. The offered item is an original, brand-new product from the manufacturer Walter Tools.
BCMT120408R-F55 WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of precise WAK15 cutting grade, positive Parallelogram 75° geometry and targeted chip control to achieve efficient machining of aluminium and other non-ferrous metals; order directly via Metav Werkzeuge or contact our consultants for application advice. BCMT120408R-F55 WAK15 milling indexable insert – Parallelogram 75° geometry, for aluminium and non‑ferrous metals — Walter Tools A BCMT120408R-F55 WAK15 is an indexable milling insert engineered for high-efficiency removal of aluminium and other non‑ferrous materials, combining a sharp uncoated grade with a positive cutting geometry for smooth, predictable performance Parallelogram 75° geometry for positive cutting WAK15 uncoated carbide for aluminium machining 0.8 mm corner radius for improved edge strength Chipbreaker F55 reduces built-up edge Faster, more efficient machining of non‑ferrous metals The insert’s WAK15 composition is an uncoated carbide grade optimised for machining aluminium and similar non‑ferrous materials. The chosen grade minimises adhesion and promotes a sharp cutting edge, which translates into higher cutting speeds and improved cycle times. With these properties, the indexable insert delivers a clear economic advantage through increased productivity and fewer tool-change interruptions, while the specified chipbreaker F55 supports stable chip formation and reduces rework caused by material build-up. Geometry that improves finish and process stability The Parallelogram 75° form and a 0.8 mm corner radius provide a balance between accessibility and edge robustness. The positive geometry helps to reduce cutting forces, which leads to lower spindle loads and a more consistent surface quality on the workpiece. The 7° clearance angle further supports a clean shear action and helps prevent rubbing on thin-walled or delicate workpieces. Together, these geometric features enable repeatable accuracy and reduced vibration during milling. Controlled chips and predictable tool life for reliable production Chip control is central when machining soft, ductile materials; the F55 chipbreaker is tuned to break and evacuate swarf consistently, reducing the risk of built‑up edge and improving operator safety. The insert’s dimensions — a nominal insert size of 12 mm and a plate thickness of 4 mm — provide mechanical stability while maintaining the ability to generate fine finishes. The result is a predictable wear behaviour that supports consistent part quality and reduces unexpected downtime. Discuss your application with Metav Werkzeuge for tailored recommendations on Walter Tools WAK15 inserts and to confirm the optimal geometry and cutting data for specific alloys Technical data Article number: BCMT120408R-F55-WAK15-WALTER ISO designation: BCMT120408R-F55 WAK15 Product type: milling indexable insert Manufacturer: Walter Tools Facts Insert shape: Parallelogram 75° Corner radius: 0.8 mm Clearance angle: 7° Chipbreaker: F55 Insert size: 12 mm Thickness: 4 mm Tolerance class: M Special features Series: Walter N grade system Grade: WAK15 (uncoated carbide) Material group: N (non‑ferrous metals) Optimised for aluminium and NE‑metals (ISO group N) Execution: T FAQ What materials is this insert suitable for? The BCMT120408R-F55 WAK15 insert is designed primarily for aluminium and other non‑ferrous metals, as indicated by the WAK15 grade and ISO group N designation. How does the Parallelogram 75° geometry help production? Parallelogram 75° geometry provides a positive cutting approach that reduces cutting forces and improves access, resulting in smoother cuts and better surface finish for non‑ferrous machining. What benefit does the F55 chipbreaker provide? The F55 chipbreaker promotes consistent chip formation and evacuation, reducing the likelihood of built‑up edge and supporting stable tool life when machining ductile materials. Is the insert coated? No, the WAK15 grade of this insert is an uncoated carbide specifically selected to maintain a sharp cutting edge on soft, adhesive materials like aluminium. Can this insert be used for finishing operations? Yes; the 0.8 mm corner radius and positive geometry make the insert well suited to operations that require a fine surface finish on non‑ferrous components. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes; there is no connection between our company and the brands named. The offered item is an original, brand‑new product from the manufacturer Walter Tools.
BCMT120408R-F55 WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold wear protection and the WKK25G grade for efficient, reproducible machining of cast iron; the robust chip control and 75° parallelogram geometry help maintain stable cutting conditions and extend tool life. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific cutting data. BCMT120408R-F55 WKK25G milling insert — Tiger·tec Gold grade for cast iron by Walter Tools The BCMT120408R-F55 WKK25G is an indexable milling insert designed for productive machining of cast iron, featuring a parallelogram 75° geometry and a dedicated F55 chipbreaker for controlled swarf management Tiger·tec Gold coating for high wear resistance Optimised for cast iron machining Parallelogram 75° form for versatile engagement 0.8 mm corner radius with F55 chipbreaker High-efficiency machining of cast iron for predictable output This insert is engineered for the demands of cast iron production work: the WKK25G grade, part of the Tiger·tec Gold series, combines a wear-resistant coating with a substrate tuned to the abrasiveness and short, breaking chips typical of cast materials. The result is a cutting edge that maintains its geometry longer under cyclic loading, which leads to fewer tool changes and a higher effective machine utilisation. For production environments where repeatability and reduced downtime are critical, the combination of coating performance and grade composition delivers measurable gains in process reliability. Geometry and chip control that stabilise the cut The parallelogram 75° insert form, together with a 0.8 mm corner radius and the F55 chipbreaker, is focused on creating stable chip flow and consistent cutting forces when milling cast iron. The 75° engagement angle offers a balance between radial contact and axial depth control, helping to reduce vibration and improve surface finish. The chipbreaker design disperses heat and promotes predictable swarf shapes, which supports longer tool life and less machine stoppage for manual clearing. These technical choices translate directly into a smoother production flow and improved finishing quality on ferritic or nodular castings. Practical advantages for workshop planning and tool selection Beyond immediate cutting performance, the insert’s tolerance class M and standardised ISO-style designation simplify stock management and toolholder matching. The insert thickness code and the 7° clearance angle are typical for robust milling applications, ensuring compatibility with common toolholders and stable clamping. Selecting this grade for cast-iron applications reduces the need for frequent trial runs: process planners gain a predictable baseline for speeds and feeds, and operators benefit from a cutting edge that resists abrasive wear while providing good surface integrity. Discuss machining strategies for cast iron with Metav Werkzeuge to match the BCMT120408R-F55 WKK25G to the correct toolholder and cutting data for best productivity Technical data SKU: BCMT120408R-F55-WKK25G-WALTER Designation: BCMT120408R-F55 Grade: WKK25G Series: Tiger·tec Gold Numerical data Clearance angle: 7° Corner radius: 0.8 mm Plate size: 12 Thickness code: 04 Tolerance class: M Design & special features Plate form: Parallelogram 75° Chipbreaker: F55 Material application: cast iron (K) Coating: Tiger·tec Gold Execution: T FAQ Which materials are best suited for this insert? The insert is optimised for cast iron applications; the WKK25G grade and Tiger·tec Gold coating are tailored to abrasive, short-chip behaviour typical of cast materials. What is the purpose of the F55 chipbreaker? The F55 chipbreaker promotes controlled chip formation and heat dissipation when milling cast iron, supporting consistent surface finish and reduced risk of chip-related interruptions. What geometry details affect cutting performance? The parallelogram 75° form, 0.8 mm corner radius and 7° clearance angle combine to balance engagement, reduce vibration and enable stable cutting in heavy-duty milling. Is the grade coated and what benefits does the coating provide? Yes — the Tiger·tec Gold coating improves wear resistance and thermal stability, extending tool life and helping to maintain cutting-edge integrity under abrasive conditions. How does this insert support production reliability? By offering a wear-resistant grade and well-engineered chip control, the insert helps reduce tool changes and enables consistent cutting behaviour, which contributes to predictable cycle times and fewer process interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
BCMT120408R-F55 WKP25S W KP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP25S carbide grade for consistently high productivity when machining steel and cast iron; the insert’s F55 chipbreaker and parallelogram geometry reduce vibration and improve chip control. Order the BCMT120408R-F55 WKP25S inserts directly via Metav Werkzeuge or consult the team for application support. BCMT120408R-F55 WKP25S milling indexable insert – Parallelogram 75°, 0.8 mm corner radius (Walter Tools) BCMT120408R-F55 WKP25S is a coated carbide milling indexable insert engineered for high‑productivity cutting of steel and cast iron, offering reliable edge stability in demanding machining tasks Tiger‑tec Silver coating technology WKP25S: coated carbide grade for P and K Parallelogram 75° geometry for secure clamping F55 chipbreaker for controlled short chips Higher productivity through coated carbide technology The combination of the Tiger‑tec Silver series and the WKP25S grade delivers consistent cutting performance and extended edge life in mid‑ to high‑speed milling of steels and cast irons. The coating system reduces flank wear and supports a wide range of cutting parameters, enabling longer tool cycles and fewer index changes. By reducing unplanned tool interventions, the insert helps maintain a steady production flow while supporting stable surface finish and dimensional consistency. Geometry tuned for chip control and process stability A parallelogram 75° form and the dedicated F55 chipbreaker produce predominantly short, controllable chips, which is especially advantageous for interrupted cuts and mixed material batches. The 0.8 mm corner radius balances edge robustness with surface quality, while the 7° relief angle reduces rubbing and helps preserve the cutting edge under varying engagement conditions. These geometric features work together to lower vibration, improve heat dissipation and reduce the risk of edge chipping during heavy cuts. Practical integration and handling advantages The insert is coded BCMT120408R-F55 and fits standard toolholders designed for this geometry, supporting straightforward retrofitting into existing milling systems. With a compact size designation 12 and plate thickness 04, the component is suitable for a range of cutter bodies used in face and slot milling operations. The controlled chip pattern and predictable wear behaviour contribute to shorter set‑up times and simplified process planning, making the insert a pragmatic choice for production environments requiring both versatility and repeatability. Recommended applications and manufacturer reliability Optimised for ISO groups P (steel) and K (cast iron), the insert is recommended where a reliable balance of productivity and surface integrity is required. Walter Tools’ reputation for precision tooling underpins predictable performance and consistent batch quality. For specialised applications or unusual alloys, advise consultation with Metav Werkzeuge to confirm the best grade and geometry for the specific cutting scenario. Contact Metav Werkzeuge for tailored application advice and to arrange supply of Walter Tools BCMT120408R-F55 WKP25S inserts; consultants are available by e‑mail or phone at info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: BCMT120408R-F55-WKP25S-WALTER Designation: BCMT120408R-F55 WKP25S Product type: milling indexable insert Manufacturer: Walter Tools Core Technical Data Corner radius: 0.8 mm Relief angle: 7° Insert size: 12 Plate thickness: 04 Tolerance class: M Special features Series / coating: Tiger‑tec Silver Grade: WKP25S Applicable materials: Steel (P), Cast iron (K) Chipbreaker: F55 Plate form: Parallelogram 75° Execution: T FAQ What materials is the BCMT120408R-F55 WKP25S best suited for? The BCMT120408R-F55 WKP25S is designed primarily for steel (P) and cast iron (K) applications, where the coated carbide grade and chipbreaker provide reliable wear resistance and chip control. What does the WKP25S designation indicate? WKP25S denotes a coated carbide grade within Walter Tools’ Tiger‑tec Silver family, formulated for a balance of wear resistance and toughness suitable for continuous and interrupted milling of steels and cast iron. How does the parallelogram 75° geometry affect performance? The parallelogram 75° shape improves clamping stability and offers advantageous cutting‑edge orientation for milling, which reduces mechanical stress on the insert and enhances process reliability. Which chip form can be expected with the F55 chipbreaker? The F55 chipbreaker promotes short, fragmented chips, improving evacuation in milling operations and lowering the risk of chip entanglement in slotting or interrupted cuts. Is the 0.8 mm corner radius suitable for finishing operations? A 0.8 mm corner radius provides a compromise between edge strength and finish quality; it is suitable for semi‑finishing and many finishing passes depending on feed and depth of cut Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools belongs to a group of precision tooling manufacturers with a strong global presence; its products are engineered for process reliability and consistent results. Protected trademarks and brand names mentioned are the property of their respective owners and are used here for explanation only. No affiliation is implied between Metav Werkzeuge and the named brands. The offered article is original, brand‑new goods of the stated manufacturer.
BCMT120408R-F55 WKP35G Wendeplatten - Walter Tools
Die Kombination aus der beschichteten Hartmetall‑Sorte WKP35G, der Tiger·tec Gold‑Technologie und der Parallelogramm 75°‑Geometrie sorgt für stabile Spanbildung und hohe Standzeiten bei der Bearbeitung von Stahl und Gusseisen; bestellen über Metav Werkzeuge oder Rückfrage bei den technischen Beratern möglich. BCMT120408R-F55 WKP35G — milling indexable insert for Stahl and Gusseisen (Walter Tools) The BCMT120408R-F55 WKP35G is an indexable milling insert designed for medium to heavy machining tasks in Stahl and Gusseisen, combining Tiger·tec Gold coating technology with a robust chipbreaker geometry. Tiger·tec Gold coating extends tool life WKP35G grade for stable chip formation Parallelogram 75° insert form for versatile milling F55 chipbreaker for reliable swarf control Consistent performance where process reliability matters The insert delivers repeatable results through its coated carbide substrate and the WKP35G grade, optimised for the thermal and mechanical demands of Stahl and Gusseisen machining. The coating reduces flank wear and supports edge stability, which in turn lowers tool-change frequency and contributes to a more predictable production flow. For shops seeking measurable productivity gains, the combination of coating and grade translates into extended tool life and fewer unplanned interruptions. Geometry and clearance that improve cutting behaviour With a parallelogram 75° form, a 7° clearance and a 0.8 mm corner radius, the insert balances accessibility and edge strength for a variety of milling operations. The geometry supports stable entry and exit from cuts and improves chip formation when used with appropriate feeds and speeds. The F55 chipbreaker is tuned to produce controlled, short chips in interrupted or continuous cuts, reducing the risk of recutting and enhancing surface quality. Clear material compatibility and application focus Marked as suitable for material groups P / K, this insert is intended mainly for unalloyed and alloyed Stahl as well as abrasive Gusseisen grades. The designation signals that the grade and chipbreaker are matched to the heat generation and fracture behaviour typical for these workpiece materials, enabling consistent metal removal rates and surface finishes when operating within recommended cutting parameters. Practical benefits for production planning The insert’s nominal size and thickness codes make it straightforward to integrate into existing tool holders and tool lists. The tolerance class M and the execution code help with inventory classification and tool-set standardisation. Using inserts with standardised geometries and proven coatings reduces process variance and simplifies tooling logistics, supporting higher machine utilisation and better scheduling accuracy. For reliable high‑productivity milling with Tiger·tec Gold inserts, contact Metav Werkzeuge for specification support and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: BCMT120408R-F55-WKP35G-WALTER Article designation: BCMT120408R-F55 WKP35G Product type: milling indexable insert Manufacturer: Walter Tools Grade / series: WKP35G, Tiger·tec Gold Execution code: T Chipbreaker: F55 Tolerance class: M Material code: P / K Insert form: Parallelogramm 75° Clearance angle: 7° Corner radius: 0.8 mm Insert size: 12 Thickness code: 04 Internal ID: BCMT120408R-F55-WKP35G-WALTER Numbers / core technical data Clearance angle: 7° Corner radius: 0.8 mm Insert size: 12 Thickness code: 04 Special features / versions Coating technology: Tiger·tec Gold (coated carbide) Grade: WKP35G Material suitability: P (Stahl), K (Gusseisen) Chip control: F55 chipbreaker Tolerance class: M FAQ What materials is this insert suitable for? The BCMT120408R-F55 WKP35G insert is designed for machining P and K groups, specifically Stahl and Gusseisen, with a grade and chipbreaker optimised for these materials. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WKP35G grade reduces wear and stabilises the cutting edge, which improves tool life and supports consistent machining performance across batches. Which chipbreaker should be expected with this insert? This insert features the F55 chipbreaker, engineered for controlled, short chips in both continuous and interrupted milling operations. Is the geometry suitable for versatile milling tasks? Yes; the parallelogram 75° form combined with a 7° clearance and 0.8 mm corner radius gives a balance of accessibility and edge strength for a range of milling applications. Can this insert be used in existing tool holders? The insert uses standard geometry codes and thickness designation, facilitating integration into compatible tool holders and simplifying tool management. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com