Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
BCMT120408R-F55 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WPP35G grade to secure longer tool life and consistent chip control in steel milling operations; order directly via Metav Werkzeuge or consult the team for application advice. BCMT120408R-F55 WPP35G milling insert for steel – Tiger‑tec Gold, Walter Tools BCMT120408R-F55 WPP35G is a milling indexable insert designed for general steel milling, combining a Tiger‑tec Gold coated substrate with a chipbreaker tuned for stable performance. Tiger‑tec Gold coating for high wear resistance WPP35G grade optimised for steel machining Parallelogram 75° shape with 0.8 mm corner radius F55 chipbreaker for stable chip control Longer tool life through advanced coating technology The Tiger‑tec Gold coating and the WPP35G carbide grade provide a durable cutting edge tailored to steel machining. The coated carbide reduces flank wear and improves thermal stability during intermittent cuts, which translates into extended tool life and fewer indexings. For production environments where consistent component quality and reduced tool change downtime matter, this combination supports predictable process behaviour and helps maintain machining tolerances over longer tool lives. Geometry engineered for precise milling and reliable chips The parallelogram 75° insert form and the F55 chipbreaker deliver a controlled chip flow and a stable cutting action. The 0.8 mm corner radius supports improved edge strength for roughing steps while retaining the ability to produce acceptable surface finishes in finishing passes. A 7° clearance angle helps reduce friction at the flank face, lowering heat generation and promoting better surface integrity. Together, these geometric choices result in reproducible part quality and fewer secondary operations. Ready for universal steel applications with professional fitting Designed for steel (P) applications, the BCMT120408R-F55 WPP35G indexable insert suits a broad range of unalloyed and alloyed steels under ISO 513 group P conditions. The plate thickness and tolerance class support secure clamping and consistent seating in compatible toolholders, aiding repeatable positioning and steady cutting forces. The overall package supports efficient material removal while maintaining dimensional stability, making it appropriate for serial production and jobbing alike. For Walter Tools Tiger‑tec Gold performance and tailored application support, contact Metav Werkzeuge – info@metav-werkzeuge.com or +49 2822 7131930 for ordering and process advice. Technical Data Article number: BCMT120408R-F55-WPP35G-WALTER SKU: BCMT120408R-F55-WPP35G-WALTER Designation: BCMT120408R-F55 WPP35G Series: Tiger‑tec Gold Grade: WPP35G Shape: Parallelogram 75° Facts Size: 12 mm Thickness: 04 (4.0 mm) Corner radius: 0.8 mm Clearance angle: 7° Tolerance class: M Special features Coating: Tiger‑tec Gold Chipbreaker: F55 Carbide type: coated cemented carbide Application group: steel (P) Form: indexable milling insert, parallelogram 75° FAQ Which materials is this insert suitable for? The BCMT120408R-F55 WPP35G insert from Walter Tools is optimised for steel (ISO group P) and is formulated to handle the typical heat and chip formation encountered when cutting unalloyed and alloyed steels. What is the corner radius and how does it affect machining? The insert has a 0.8 mm corner radius, which enhances edge strength for robust cutting and contributes to consistent surface quality by balancing edge durability and micro-geometry. What does the F55 chipbreaker deliver in practice? The F55 chipbreaker offers stable chip control for a wide range of steel machining conditions, promoting continuous chip evacuation and predictable cutting forces for reliable process behaviour. Is the insert coated and what are the benefits? Yes; the Tiger‑tec Gold coating on the WPP35G grade improves wear resistance and thermal stability, helping to extend tool life and maintain cutting-edge integrity under demanding steel machining cycles. Does this insert suit finishing as well as roughing operations? The geometry and 0.8 mm corner radius make the insert suitable for many roughing and semi-finishing tasks in steel; final finishing performance will depend on cutting parameters and machine rigidity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and indicate no affiliation between our company and the named brands. The delivered article is an original, factory-new product of the named manufacturer, Walter Tools.
BCMT120408R-F55 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of durable PVD wear resistance and versatile cutting performance provided by the WSP45G Tiger·tec Gold grade together with the positive cutting geometry of the parallelogram 75° form; order the BCMT120408R-F55 WSP45G milling indexable insert via Metav Werkzeuge or request application advice from our consultants. BCMT120408R-F55 WSP45G — milling indexable insert, Tiger·tec Gold, Walter Tools The BCMT120408R-F55 WSP45G is a coated carbide milling indexable insert designed for versatile milling of Stahl, rostfreier Stahl and heat‑resistant alloys in a range of industrial facing and slotting operations. Tiger·tec Gold PVD coating for extended tool life Versatile WSP45G grade for Stahl, rostfreier Stahl, S Parallelogram 75° form for positive cutting geometry Stable chip control with F55 chipbreaker Longer service life through advanced coating technology The insert’s Tiger·tec Gold coating and WSP45G composition provide a balanced combination of wear resistance and edge toughness. This PVD-coated carbide resists abrasive wear while preserving edge stability in interrupted cuts, which helps to reduce tool changes and increase uptime. The result is a measurable improvement in process consistency and a lower cost per machined part, especially in applications with frequent heat build-up. Consistent results across demanding materials Designed for general milling use, the insert supports machining of Stahl, rostfreier Stahl and the S group (heat‑resistant superalloys and titanium). The F55 chipbreaker promotes reliable chip formation and evacuation, reducing the risk of built-up edge and improving surface finish. Operators gain a dependable cutting geometry that is particularly useful where material mix and variability require a single, robust grade for multiple workpieces. Positive geometry and dimensional reliability for safe use The parallelogram 75° form with a 7° relief and a corner radius of 0.8 mm gives a positive approach angle and good strength at the cutting edge. Tolerance class M ensures repeatable seating and stable clamping in standard toolholders. These characteristics support secure machining at moderate to high cutting parameters, enhancing productivity while maintaining predictable tool performance. Contact Metav Werkzeuge for application-specific advice on Walter Tools Tiger·tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for consultation and ordering Technical data SKU: BCMT120408R-F55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT120408R-F55 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Grade: WSP45G Material group: P / M / S Chipbreaker: F55 Execution: T Plate designation: BCMT120408R-F55 Core specifications Relief angle: 7° Corner radius: 0.8 mm Insert size: 12 mm Thickness code: 04 Tolerance class: M ISO designation: BCMT120408R-F55 WSP45G UID: BCMT120408R-F55-WSP45G-WALTER Features & compatibility Tiger·tec Gold PVD coating Coated carbide grade WSP45G Parallelogram 75° insert form Suitable for Stahl, rostfreier Stahl and S (heat‑resistant alloys and titanium) Stable chip control with F55 chipbreaker Positive cutting geometry for reliable surface quality FAQ Which workpiece materials are recommended for this insert? The BCMT120408R-F55 WSP45G insert is specified for machining Stahl, rostfreier Stahl and S‑group materials (heat‑resistant alloys and titanium) thanks to the WSP45G grade and Tiger·tec Gold coating. How does the Tiger·tec Gold coating affect performance? Tiger·tec Gold on the WSP45G grade improves abrasive wear resistance and edge stability, extending tool life under the thermal and mechanical loads typical in milling operations. What benefits does the parallelogram 75° form provide? The parallelogram 75° geometry offers a positive cutting approach that balances cutting forces and edge strength, aiding chip evacuation and contributing to consistent surface finish. What is the purpose of the F55 chipbreaker? The F55 chipbreaker is engineered for controlled chip formation and evacuation, reducing the tendency for built‑up edge and helping to maintain process security during continuous and interrupted cuts. What does tolerance class M mean for machine setup? Tolerance class M indicates medium dimensional tolerances for reliable fit and repeatability in standard toolholders, supporting stable clamping and uniform performance across inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mention of brand names such as Walter Tools is for explanatory purposes only and does not imply any affiliation with our company. The offered item is an original, factory‑new product from the manufacturer.
BCMT120408R-G55 WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating, a dedicated cast iron (ISO K) grade and the parallelogram 75° geometry for consistent chip control and long edge life; order the inserts directly via Metav Werkzeuge or consult the specialists for application support. BCMT120408R-G55 WKK25G — Indexable milling insert (Parallelogram 75°, 7° clearance) by Walter Tools The BCMT120408R-G55 WKK25G is a parallelogram indexable milling insert engineered for productive machining of cast iron components in industrial milling applications. Tiger·tec Gold coated insert Optimised for cast iron (ISO K) Parallelogram 75° geometry 0.8 mm corner radius, 7° clearance Stable machining through dedicated coating and grade The combination of the Tiger·tec Gold coating and the WKK25G coated-carbide grade provides high resistance to abrasive wear, which is typical in cast iron machining. The coated surface reduces flank wear and extends the period between index changes, resulting in improved process uptime and lower tooling costs per component. The designation for cast iron (ISO K) signals that the cutting edge geometry and coating are tuned to manage short, brittle chips and abrasive particles without compromising edge life. Geometry that supports reliable chip formation and surface quality The parallelogram 75° insert form, together with a 7° clearance angle, produces a cutting action that balances radial and axial forces for stable milling passes. The 0.8 mm corner radius enables a robust cutting edge for heavier engagement while maintaining acceptable surface finish on casting materials. The built-in G55 chipbreaker helps to fragment and evacuate chips effectively, reducing re-cutting and thermal impact on the cutting edge — a pragmatic advantage in series production and interrupted cuts. Practical benefits for production planning and process security As an indexable insert with standard BCMT seating and a nominal plate size of 12 mm and thickness 4 mm, the component integrates easily into existing toolholders, facilitating quick index changes and predictable tool life. The insert supports consistent cycle times and repeatable results in cast iron operations, contributing to traceable productivity gains. Walter Tools’ engineering focus on process reliability complements the grade characteristics, making this insert suitable where reproducible performance and stable chip control are priorities. For technical advice or to secure supply of BCMT120408R-G55 WKK25G inserts from Walter Tools, contact Metav Werkzeuge for product matching and order support by phone +49 2822 7131930 or by email info@metav-werkzeuge.com Technical Data Article number: BCMT120408R-G55-WKK25G-WALTER Name: BCMT120408R-G55 WKK25G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Clearance angle: 7° Corner radius: 0.8 mm Plate size: 12 mm Thickness: 4 mm Geometry: Parallelogram 75° Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WKK25G (coated carbide) Chipbreaker: G55 Application: Cast iron (ISO K) Insert form: BCMT-style indexable milling insert FAQ What materials is this insert intended for? The BCMT120408R-G55 WKK25G insert is formulated for machining cast iron materials (ISO K), with the grade and coating tuned to resist abrasive wear typical of such workpieces. How does the Tiger·tec Gold coating benefit machining performance? The Tiger·tec Gold coating enhances wear resistance and thermal stability; with the WKK25G grade it improves edge life and process consistency when milling cast iron. Which insert geometry suits interrupted cuts or heavy engagement? The parallelogram 75° geometry combined with a 0.8 mm corner radius provides a strong cutting edge and balanced forces, making the insert suitable for interrupted cuts and heavier chip loads in cast iron. Is the BCMT120408R-G55 compatible with standard BCMT toolholders? Yes, the insert is a BCMT-style indexable milling insert with common seating, enabling straightforward replacement in holders designed for BCMT inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and indicate no affiliation between our company and the listed manufacturers. The offered item is an original, factory-new product of the manufacturer.
BCMT120408R-G55 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, optimised chip control and long tool life for efficient milling of Stahl and Gusseisen; order directly via Metav Werkzeuge or request application advice from our consultants. BCMT120408R-G55 WKP25S milling indexable insert — Tiger·tec Silver, G55 chipbreaker (Walter Tools) The BCMT120408R-G55 WKP25S is a parallelogram 75° milling insert intended for versatile roughing and finishing operations in Stahl and Gusseisen. Tiger·tec Silver coated for long tool life Optimised G55 chipbreaker for secure chip control Parallelogram 75° geometry for flexible milling strategies 7° relief angle for reliable cutting engagement Durable coating and carbide grade for extended productivity The insert belongs to the Tiger·tec Silver series and is supplied in the WKP25S grade, a coated carbide developed for demanding milling tasks. This combination delivers improved resistance to abrasive wear and stable edge retention under continuous cutting conditions. The coating technology reduces friction and thermal load, which translates into longer tool life and fewer interruptions in the production flow. Such material and coating choices support consistent machining results and reduce the frequency of tool changeovers in serial operations. Geometry and chip control that stabilise the cutting process With a parallelogram 75° form and the G55 chipbreaker, the insert reliably manages chip formation and evacuation during both up- and down-milling. The chipbreaker design favours short, controlled chips when machining Gusseisen and promotes favourable chip flow for a wide range of Stahl grades. The specified 7° relief angle helps maintain stable cutting engagement and reduces rubbing on the flank face, improving surface finish and limiting heat generation at the cutting edge. Small corner radius and robust profile for consistent edge life A corner radius of 0.8 mm balances strength and edge sharpness, enabling productive roughing as well as acceptable finishing results without frequent edge damage. The insert thickness and format (size 12, thickness 04) provide mechanical stability in moderate to heavy-duty milling operations, while the M tolerance class ensures repeatable seating and indexing in standard toolholders. This design choice supports reproducible results across batches and helps maintain component tolerances in serial production. Practical benefits for workshop and production environments This milling insert is optimised for machining Stahl and Gusseisen, reducing cycle times through consistent material removal rates and reliable chip control. Fewer interruptions for tool changes and predictable edge life contribute to improved overall equipment effectiveness. For toolroom engineers and production planners, the grade and geometry provide an economical compromise between performance and life span, supporting both scheduled production and short-series flexibility. Contact Metav Werkzeuge for tailored application advice on the BCMT120408R-G55 WKP25S Tiger·tec Silver insert and fast supply from our Emmerich warehouse via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: BCMT120408R-G55-WKP25S-WALTER Label: Fräswendeschneidplatte BCMT120408R-G55 WKP25S Walter Tools Product type: Fräswendeschneidplatte Brand: Walter Tools Facts Relief angle: 7° Corner radius: 0.8 mm Plate shape: Parallelogram 75° Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Series: Tiger·tec Silver Grade: WKP25S Chipbreaker: G55 Material suitability: Stahl Material suitability: Gusseisen Execution: T FAQ What materials can be machined with this insert? The BCMT120408R-G55 WKP25S is designed for machining Stahl and Gusseisen, offering good wear resistance and chip control for both material groups. Which chipbreaker is fitted and what is its benefit? The insert features the G55 chipbreaker, which promotes controlled chip formation and evacuation to support reliable milling in a range of Stahl grades and cast-iron applications. How does the Tiger·tec Silver series improve performance? The Tiger·tec Silver coating reduces friction and thermal loading on the cutting edge, resulting in improved edge life and consistent machining performance with the WKP25S grade. Is the corner radius suitable for finishing operations? A 0.8 mm corner radius provides a compromise between edge strength and surface finish, allowing for productive roughing and acceptable finishing in many applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
BCMT120408R-G55 WKP35G Wendeplatten - Walter Tools
High productivity and consistent surface quality result from the combination of the Tiger·tec Gold coating and the WKP35G grade in a stable parallelogram geometry; benefit from improved tool life and reliable chip control and order directly via Metav Werkzeuge or consult our specialists for machining advice. BCMT120408R-G55 WKP35G milling insert – Tiger·tec Gold, for steel and cast iron | Walter Tools The BCMT120408R-G55 WKP35G is a precision milling indexable insert engineered for high-productivity milling applications in steel and cast iron, offering robust wear resistance and consistent chip formation. Tiger·tec Gold coating for extended tool life Grade WKP35G optimised for steel and cast iron Parallelogram 75° shape for secure clamping and stability 7° clearance with 0.8 mm corner radius for improved finish Higher throughput through coating and substrate synergy The combination of a Tiger·tec Gold coating and the WKP35G carbide grade yields a balance of wear resistance and toughness that supports longer tool life and fewer insert changes. For production environments where cycle time and tool-change downtime matter, this insert reduces interruptions by maintaining a stable cutting edge under the thermal and mechanical loads typical for machining steel and cast iron. The optimisation of the coating and substrate addresses abrasive wear on cast materials while coping with the heat and chip-formation behaviour of steels, resulting in measurable productivity gains. Reliable chip control and process stability Thanks to the G55 chipbreaker and the parallelogram 75° geometry, the cutting edge produces controlled, predictable chips that facilitate stable evacuation and protect the workpiece surface. The built-in 7° clearance and 0.8 mm corner radius improve surface finish and resist edge chipping in interrupted or continuous cuts. This means fewer rejects and a reduction in rework, which supports a more efficient production flow and lower overall manufacturing costs. The insert’s tolerance class M ensures repeatable positioning in standard milling cutters. Easy integration into machining programmes The insert’s designation and size code align with common toolholder systems, allowing straightforward tool-change procedures and inventory management. With a compact size and standard thickness code 04, the insert suits a wide range of cutters while keeping inventory simple. Technical staff will appreciate the clear classification for material groups Steel (P) and Cast iron (K), which makes process planning and feed/speed selection simpler. For applications that require a balance between performance and economy, this indexable plate offers a practical solution. Contact Metav Werkzeuge today to discuss how the Tiger·tec Gold WKP35G insert can increase throughput and tool life; Metav Werkzeuge’s specialists will advise on cutter selection and supply arrangements and can provide detailed machining recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: BCMT120408R-G55-WKP35G-WALTER Article designation: BCMT120408R-G55 WKP35G Type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Facts Free clearance: 7° Corner radius: 0.8 mm Inscribed circle / size: 12 mm Thickness code: 04 Tolerance class: M Special features Chipbreaker: G55 Shape: Parallelogram 75° Suitable for: Steel (P) and Cast iron (K) Coating/technology: Tiger·tec Gold (coated carbide) Substrate designation: P / K FAQ What materials is this insert designed for? The BCMT120408R-G55 WKP35G insert from Walter Tools is designed primarily for steel (P) and cast iron (K), with the WKP35G grade and Tiger·tec Gold technology optimised for those material groups. How does the G55 chipbreaker affect machining? The G55 chipbreaker promotes controlled chip formation for improved evacuation and reduced risk of chip entanglement; this helps maintain process stability and enhances surface quality when using this milling insert. Which features contribute most to tool life? The combination of the Tiger·tec Gold coating and the WKP35G carbide grade provides enhanced wear resistance and thermal stability, which together prolong edge life and reduce insert consumption in demanding milling tasks. What is the significance of the parallelogram 75° shape? The parallelogram 75° form ensures a secure seat and consistent engagement with the workpiece, improving clamping stability and contributing to repeatable machining results with fewer incidents of edge failure. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
BCMT120408R-G55 WPP35G Wendeplatten - Walter Tools
Achieve stable cutting performance and longer tool life with the Tiger·tec Gold grade and the G55 chipbreaker; ideal for demanding steel machining and productivity improvements. Order the BCMT120408R-G55 WPP35G directly via Metav Werkzeuge or ask our consultants if needed. BCMT120408R-G55 WPP35G milling insert — Tiger·tec Gold coating, G55 chipbreaker for steel | Walter Tools The BCMT120408R-G55 WPP35G is a parallelogram milling insert designed for reliable and productive steel machining across a wide range of operations. Tiger·tec Gold coating for longer tool life G55 chipbreaker for reliable chip control Parallelogram 75° shape for versatile milling 7° clearance and 0.8 mm corner radius Consistent performance for steel machining The combination of Tiger·tec Gold technology and the WPP35G grade provides a balanced mix of wear resistance and toughness suited to ISO P applications, especially for unalloyed and alloyed steel. The coated carbide substrate resists abrasive wear while maintaining edge stability under the thermal stresses typical of steel cutting. This means fewer tool changes, predictable service life and consistent part quality, helping to raise overall line efficiency. The insert’s design supports stable chip formation, which reduces the risk of built-up edge and improves repeatability in batch production. Reliable chip control and precise geometry for surface quality The G55 chipbreaker is engineered to manage chips effectively during a wide range of feeds, promoting continuous evacuation and reducing recutting risks. Combined with the parallelogram 75° geometry and 7° clearance, the insert delivers controlled cutting engagement and improved accessibility in shoulder and oblique milling. The 0.8 mm corner radius supports a good balance between edge strength and surface finish, allowing for moderate finishing passes without sacrificing stability. For shops that require consistent surface integrity and minimal secondary operations, this geometry contributes directly to time savings and cost reduction. Economical productivity and application guidance The insert’s coated carbide construction and its chipbreaking concept are intended to boost productivity by enabling higher sustained cutting parameters in steel applications. The grade mix of toughness and wear resistance is designed for common steel machining tasks where thermal load and strain vary. Choosing this insert reduces downtime from frequent indexing and can lower total cutting costs per part. For specific machine and process tuning, Metav Werkzeuge’s application consultants can advise on feeds, speeds and suitable holder selection to align the insert’s capabilities with the production objective. Contact Metav Werkzeuge to discuss the Walter Tools BCMT120408R-G55 WPP35G milling insert and secure Tiger·tec Gold performance for steel machining Technical Data SKU: BCMT120408R-G55-WPP35G-WALTER Product: Fräswendeschneidplatte BCMT120408R-G55 WPP35G Walter Tools Manufacturer: Walter Tools Type: milling insert Core technical data Plate size: 12 Plate thickness: 04 Corner radius: 0.8 mm Clearance angle: 7° Plate form: Parallelogram 75° Special features Coating / grade: WPP35G (Tiger·tec Gold coated carbide) Chipbreaker: G55 Series: Tiger·tec Gold Tolerance class: M Execution: T Material group: P (Steel, ISO P) Designation: BCMT120408R-G55 ISO designation: BCMT120408R-G55 WPP35G FAQ What materials is this insert suitable for? The BCMT120408R-G55 WPP35G is formulated for steel (ISO P) machining, optimised to handle the thermal and chip-formation characteristics typical of unalloyed and alloyed steels. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP35G grade increases wear resistance and edge stability during steel cutting, which can extend insert life and improve process consistency. What is the role of the G55 chipbreaker? The G55 chipbreaker provides controlled chip formation and evacuation for a wide range of feeds, reducing re-cutting and improving surface finish in milling operations. Can this insert be used for finishing passes? With its 0.8 mm corner radius and stable geometry, the insert is suitable for moderate finishing applications where a balance of strength and surface quality is required. Is the geometry suitable for shoulder milling and oblique approaches? Yes; the parallelogram 75° form and 7° clearance angle offer good access for shoulder milling and angled approaches while maintaining cutting stability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are used here for explanation only. There is no affiliation between our company and the trademark owners. The offered item is an original, brand-new product from the manufacturer. The Walter brand is included where appropriate.
BCMT120408R-G55 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSM35G grade for stable cutting edges and controlled chip formation; this delivers consistent component quality and reduced tool changes. Order the milling insert directly via Metav Werkzeuge or contact their consultants for tailored machining recommendations. BCMT120408R-G55 WSM35G milling insert – Walter Tools (Parallelogram 75°, for rostfreier Stahl and superalloys) BCMT120408R-G55 WSM35G is a milling indexable insert designed for demanding material applications and secure chip control in finishing and medium-depth machining. Tiger·tec Gold coating technology Optimised for rostfreier Stahl and superalloys Parallelogram 75° geometry for axial stability G55 chipbreaker for reliable chip control Proven grade and coating for tough materials The WSM35G grade, part of the Tiger·tec Gold family, combines a coated cemented carbide substrate with a coating system engineered for heat resistance and edge stability. This results in stable chip formation and extended tool life when machining rostfreier Stahl and high-temperature alloys. Users obtain fewer unplanned interruptions thanks to improved wear behaviour, which translates into higher process efficiency and reproducible part quality. The engineered grade reduces the risk of built-up edge and supports consistent surface finish across batches. Geometry that improves surface finish and repeatability The Parallelogram 75° insert geometry and dedicated G55 chipbreaker are designed to guide chip flow and moderate cutting forces. The form supports a predictable cutting direction and helps maintain contact conditions across the tool path, which benefits surface integrity and dimensional repeatability. With a 0.8 mm corner radius and a 7° clearance angle, the insert balances edge strength with the ability to achieve fine finishes; this combination suits finishing passes on difficult alloys without sacrificing edge life. Compatibility and process economy The insert is specified for material groups S and M, reflecting suitability for superalloys and rostfreier Stahl respectively. Its construction supports higher cutting speeds and stable performance in series production, yielding lower overall tooling cost per part. The design eases integration into existing toolholders that accept BCMT-style inserts and helps maintain cycle-time targets. Technical data such as the grade and chipbreaker allow engineering teams to calculate machining parameters with greater confidence, improving first-pass yield and reducing rework. Manufacturer reliability and application support Walter Tools' product family emphasises process security and repeatable performance, with the current series tuned for challenging materials. The insert’s tolerance class M and the Tiger·tec Gold technology together provide a robust baseline for both manual setup and automated tool-change systems. For customers seeking parameter suggestions or cutting trials, Metav Werkzeuge can provide application guidance and support data to ensure the insert meets production demands while maintaining component quality. Contact Metav Werkzeuge today for a customised machining proposal based on the Walter Tools grade and to discuss integration with existing tool systems Technical data SKU: BCMT120408R-G55-WSM35G-WALTER Designation: BCMT120408R-G55 WSM35G Product type: Milling insert Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Relief angle: 7° Corner radius: 0.8 Plate form: Parallelogram 75° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSM35G Chipbreaker: G55 Material suitability: S / M Execution: T FAQ What materials is this insert intended for? The BCMT120408R-G55 WSM35G milling insert is specified for material groups S and M, making it suitable for superalloys and rostfreier Stahl in a range of machining tasks. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WSM35G grade enhances heat resistance and edge stability, which helps reduce wear and supports consistent chip control during extended runs. Which geometry features support surface finish? The Parallelogram 75° shape combined with the G55 chipbreaker and a 0.8 mm corner radius contributes to controlled chip evacuation and stable cutting conditions that improve surface integrity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT120408R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
Taking advantage of the WSM45X coated-carbide grade together with the G55 chipbreaker and a 0.8 mm corner radius delivers reliable chip control and consistent surface quality in rostfreier Stahl and heat-resistant alloys; order the BCMT120408R-G55-WSM45X-WALTER via Metav Werkzeuge or request cutting-data guidance from the sales team. BCMT120408R-G55 WSM45X – Milling insert (Parallelogram 75°, 7° relief) by Walter Tools The BCMT120408R-G55 WSM45X is a coated carbide milling insert designed for productive machining of rostfreier Stahl and heat-resistant superalloys in demanding production environments. WSM45X coated carbide for rostfreier Stahl and superalloys Parallelogram 75° form for stable radial engagement 0.8 mm corner radius for consistent surface finish G55 chipbreaker optimised for secure chip control High-performance grade for demanding alloys and rostfreier Stahl The WSM45X grade is a coated carbide developed to cope with the thermally demanding behaviour of rostfreier Stahl and Ni-based superalloys. Its coating technology stabilises the cutting edge under elevated temperatures, which supports consistent chip formation and reduces the risk of built-up edge. For production shops that prioritise process reliability, this material combination enables longer tool life and predictable tool-change intervals, translating into measurable productivity gains on components with difficult-to-cut alloys. Geometry and chip control that improve cycle times A Parallelogram 75° insert geometry combined with the G55 chipbreaker provides controlled chip flow and secure engagement in interrupted and continuous cuts. The 7° relief angle reduces rubbing on the flank while preserving edge strength, which helps maintain cutting forces within expected ranges and reduces power spikes at higher feed rates. This geometry is conducive to stable milling strategies, allowing higher metal removal rates without sacrificing dimensional repeatability. Precision edge preparation for consistent surface quality The insert’s 0.8 mm corner radius and defined plate dimensions (size 12, thickness code 04) deliver a balance between edge strength and achievable surface finish. The modest corner radius smooths load peaks at the cutting edge, which reduces microchipping and supports repeatable part tolerances. In finishing passes, this geometry helps achieve better surface integrity with fewer rework cycles, particularly important in components where form and finish are critical. Integration into production for economical machining Specifying the BCMT120408R-G55-WSM45X-WALTER in machining layouts supports higher process security and fewer unexpected stoppages. The coated-carbide grade and chip control features are engineered to match the cutting demands of rostfreier Stahl and heat-resistant alloys, which can reduce total cost per component through longer indexable-insert life and improved first-pass yield. Planning cutting data around the insert’s strengths allows shops to increase throughput while maintaining quality standards. For availability and tailored cutting recommendations for Walter Tools inserts, contact Metav Werkzeuge to discuss suitable grades and machining parameters for rostfreier Stahl applications. Technical Data Article number: BCMT120408R-G55-WSM45X-WALTER Item designation: BCMT120408R-G55 WSM45X Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WSM45X Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 12 Thickness code: 04 Special features Chipbreaker: G55 Shape: Parallelogram 75° Coated carbide grade suitable for rostfreier Stahl and superalloys Tolerance class: M FAQ What materials is this insert suitable for? The BCMT120408R-G55 WSM45X by Walter Tools is intended for rostfreier Stahl and heat-resistant superalloys (ISO group M and S), offering thermal stability and secure chip formation. How does the G55 chipbreaker influence machining? The G55 chipbreaker on this milling insert promotes controlled chip formation and evacuation, which supports stable cutting in interrupted and continuous milling operations with demanding alloys. What edge radius and form are supplied with the insert? This parallelogram insert is supplied with a 0.8 mm corner radius and a Parallelogram 75° geometry, combining edge strength with consistent surface finish. Is the WSM45X grade coated and what is its benefit? WSM45X is a coated carbide grade; the coating enhances heat resistance and maintains edge integrity under elevated temperatures typical of rostfreier Stahl machining. Can this insert be used for finishing passes? With its 0.8 mm corner radius and stable geometry, the insert is suitable for finishing where a balance of surface quality and edge robustness is required. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (market appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation with our company.
BCMT120408R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold PVD technology, versatile compatibility with steel, stainless steel and superalloys, and a 0.8 mm corner radius that balances edge strength and surface finish; order the BCMT120408R-G55 WSP45G insert directly via Metav Werkzeuge or consult our specialists for cutting parameter recommendations. BCMT120408R-G55 WSP45G indexable milling insert — Tiger·tec Gold, for steel/stainless steel/superalloys (Walter Tools) BCMT120408R-G55 WSP45G is an indexable milling insert engineered for versatile milling tasks, from productive roughing to precision finishing in steels, stainless steels and heat‑resistant alloys. Tiger·tec Gold PVD grade Suitable for steel, stainless steel, superalloys 0.8 mm corner radius for robust edges 7° relief angle for reduced rubbing Proven grade for mixed-material production The Tiger·tec Gold coating combines wear resistance with thermal stability, giving this PVD-coated carbide grade consistent performance in mixed‑material production. The chosen cutting grade is tailored to the thermal and tribological demands of machining steels and high-temperature alloys, so cycle times can be reduced while maintaining predictable tool life. The combination of a hard coating and a tough substrate ensures stable chip formation and repeatable results in both interrupted and continuous cuts. Longer edge life with balanced geometry A 0.8 mm corner radius strengthens the cutting edge against mechanical shock and flank wear without compromising achievable surface quality. The insert’s geometry supports efficient heat distribution and edge stability, which often means fewer tool changes and more uptime on the machine. The moderate radius is particularly effective where a compromise between roughing resilience and finishing capability is required, delivering measurable productivity gains in batch production. Positive cutting behaviour for consistent process security The insert’s 7° relief angle and parallelogram 75° shape promote a positive cutting action that reduces rubbing and minimises work hardening tendencies on stainless and heat‑resistant materials. This geometry supports controlled chip flow and helps maintain a sharp cutting edge under elevated temperatures. As a result, operators can expect improved process security and easier parameter transfer between jobs with similar material mixes. Material range and application guidance This grade is explicitly suited for machining steels (P), stainless steels (M) and heat‑resistant superalloys and titanium (S). The designation indicates a balanced composition aimed at resisting the high temperatures and adhesive tendencies of these materials while still providing reliable wear performance. Where unfamiliar with the specific cutting data, consult Metav Werkzeuge for feed and speed recommendations tailored to job size, machine rigidity and coolant strategy to achieve repeatable, economical results. Contact Metav Werkzeuge today to discuss application-specific parameters for the Tiger·tec Gold BCMT120408R-G55 WSP45G indexable insert and secure optimum cutting performance for your parts Technical data Article number: BCMT120408R-G55-WSP45G-WALTER Designation: BCMT120408R-G55 WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Core data Size (mm): 12 Thickness: 04 Corner radius (mm): 0.8 Relief angle: 7° Shape: Parallelogram 75° Tolerance class: M Special features Grade: WSP45G (PVD-coated carbide) Materials: Steel / Stainless steel / Superalloys & Titanium Application: Indexable milling insert Execution: T (standard chipformer variant) FAQ What materials is this insert suitable for? The BCMT120408R-G55 WSP45G insert is designed for machining steel, stainless steel and heat‑resistant superalloys/titanium, reflecting the P/M/S compatibility of the Tiger·tec Gold grade. How does the Tiger·tec Gold coating influence tool life? The Tiger·tec Gold PVD coating enhances wear resistance and thermal stability, which supports longer edge life and consistent performance across varied milling tasks. When is a 0.8 mm corner radius recommended? A 0.8 mm corner radius is recommended where a balance between edge strength for roughing and acceptable surface finish for semi‑finishing is required. How does the parallelogram 75° shape affect cutting? The parallelogram 75° geometry provides a positive cutting angle and controlled chip ejection, aiding process stability and repeatability in many milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
BCMT120408R-K55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the K55 chipbreaker to achieve reliable chip control and consistent productivity; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. BCMT120408R-K55 WKP35G milling insert — Tiger·tec Gold grade for steel and cast iron machining, K55 chipbreaker — Walter Tools The BCMT120408R-K55 WKP35G is a precision milling insert designed for productive machining of steel and cast iron, combining a coated carbide grade with a controlled-chip geometry for versatile milling tasks. *Tiger·tec Gold coating for high process security *WKP35G grade optimised for steel and cast iron *K55 chipbreaker for controlled chip formation *Parallelogram 75° form with 7° clearance Productivity through a robust graded coating The coated carbide grade WKP35G belongs to the Tiger·tec Gold series and is engineered to improve process security and tool life in mixed production environments. The coating reduces abrasive wear and stabilises the cutting edge, which results in fewer tool changes and higher net productivity. As a consequence, workshops benefit from more predictable machining cycles and improved overall equipment effectiveness when using this insert. Reliable chip control and surface outcome The K55 chipbreaker is designed to produce short, controlled chips in both steel and cast iron, supporting safer swarf handling and uninterrupted machining. The combination of chipbreaker geometry and the insert’s clearance angle of 7° helps maintain a stable cutting temperature and consistent surface finish. The 0.8 mm corner radius supports moderate strength at the cutting edge while enabling acceptable finish quality on common engineering materials. Geometry that supports flexibility and repeatability The insert’s parallelogram shape with a 75° cutting edge offers a versatile engagement angle for a wide range of milling strategies. With a nominal size of 12 and a plate thickness of 04, this indexable plate is compatible with many standard milling cutter bodies and seats within tolerance class M for repeatable positioning. These geometric attributes contribute to predictable tool behaviour and reduced setup times across batch sizes. Application advantages and practical use As a member of the Tiger·tec Gold family by Walter Tools, the insert is particularly suitable for production and job-shop environments that require durable performance on steel and cast iron components. The coated grade and chipbreaker balance wear resistance and chip evacuation, lowering the risk of built-up edge and enabling consistent cycle times. For specific cutting data and optimal feeds, technical consultation is recommended to match cutter body, clamping, and machine rigidity to the intended operation. Contact Metav Werkzeuge for tailored application advice or to arrange supply of Walter Tools Tiger·tec Gold WKP35G milling inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BCMT120408R-K55-WKP35G-WALTER ISO designation: BCMT120408R-K55 WKP35G Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: K55 Facts Relief angle: 7° Corner radius: 0.8 mm Shape: Parallelogram 75° Size: 12 Thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Material suitability: P / K (steel and cast iron) Manufacturer: Walter Tools Execution: T FAQ Is this insert suitable for stainless steel applications? The insert is specified for steel and cast iron (P/K); stainless steel suitability is not listed for the BCMT120408R-K55 WKP35G, so material-specific testing or consultation is recommended. What does the WKP35G designation mean? WKP35G denotes a Walter Tools coated carbide grade within the Tiger·tec Gold family, developed for high process reliability and broad workpiece coverage, particularly for steel and cast iron applications. How does the K55 chipbreaker influence machining? The K55 chipbreaker promotes short, controlled chips and stable swarf flow during milling of steel and cast iron, which improves safety and reduces the likelihood of chip-related interruptions. Which geometric features are most relevant for setup? Key specs are the 7° relief angle, 0.8 mm corner radius and the parallelogram 75° form; these determine cutter engagement, strength and achievable surface quality for the BCMT120408R-K55 WKP35G. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any affiliation with or endorsement by our company. The offered item is an original, factory-new product from the respective manufacturer.
BCMT120408R-K55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a proven WKP35S cutting grade and the K55 chipformer for reliable chip control and consistent component quality; order directly via Metav Werkzeuge or contact our consultants for application-specific advice. BCMT120408R-K55 WKP35S — Milling indexable insert, Tiger·tec Silver (Walter Tools) The BCMT120408R-K55 WKP35S is a milling indexable insert developed for efficient machining of steel and cast iron, featuring a Parallelogram 75° geometry, a 7° relief and a 0.8 mm corner radius for stable cutting performance Tiger·tec Silver coating, WKP35S grade Optimised K55 chipformer for controlled chips Parallelogram 75° shape with 0.8 mm corner Suitable for steel (P) and cast iron (K) High-performance cutting for mixed production runs The Tiger·tec Silver coating combined with the WKP35S cutting grade delivers optimised wear resistance and consistent edge behaviour across a wide range of steels and cast irons. This balance of hardness and toughness reduces flank and crater wear under typical milling temperatures, which translates into longer tool life and fewer index changes. For production environments that require repeatable results, the coated substrate minimises the risk of unexpected tool failure and supports stable cycle times. Geometry designed for repeatable dimensional accuracy The insert’s Parallelogram 75° form and 0.8 mm corner radius ensure predictable engagement and improved surface finish during shoulder and face milling. The 7° relief angle helps to reduce rubbing at the cutting edge, lowering cutting forces and vibration. As a result, the component tolerances remain consistent across batches, and finishing passes can be reduced. The shape also supports positive cutting conditions that favour efficient chip evacuation. Controlled chip formation for safer machining Equipped with the K55 chipformer, the insert actively conditions chips to break and evacuate cleanly in both steel and cast iron applications. Controlled chip flow reduces re-cutting, heat concentration and the potential for tool interference, improving both operator safety and process uptime. For mixed-material workshops, this reliable chip behaviour simplifies tooling strategies and reduces the need for frequent process adjustments. Practical use and handling for workshop efficiency The insert is supplied in the defined designation and geometry for straightforward tool selection and inventory management. The clear series and grade marking support fast allocation to holders and machines, while the indexable insert format allows multiple re-uses of the cutting edges before replacement. For operators new to coated grades, it is recommended to start with conservative cutting data and increase speeds gradually while monitoring tool wear to find the most economical balance for the specific machine and workpiece. Discuss machining requirements with Metav Werkzeuge to evaluate Walter Tools Tiger·tec Silver WKP35S for specific components; contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored recommendations Technical Data Article number: BCMT120408R-K55-WKP35S-WALTER Article name: BCMT120408R-K55 WKP35S Manufacturer: Walter Tools Series: Tiger-tec Silver Core technical data Plate size: 12 mm Plate thickness: 04 Corner radius: 0.8 mm Relief angle: 7° Shape: Parallelogram 75° Tolerance class: M Special features Coating: Tiger·tec Silver Grade: WKP35S Chipformer: K55 Applicable materials: Steel (P), Cast iron (K) Execution: T Designation: BCMT120408R-K55 FAQ What materials is this insert suitable for? The BCMT120408R-K55 WKP35S insert is designed for machining steel (P) and cast iron (K), utilising the Tiger·tec Silver coating and WKP35S grade to handle typical thermal and abrasive conditions. How does the K55 chipformer affect machining? The K55 chipformer promotes predictable chip breakage and evacuation; this reduces re-cutting and thermal concentration when using the insert in milling operations on steel and cast iron. What benefit does the Parallelogram 75° shape provide? The Parallelogram 75° geometry gives a positive cutting approach that improves surface finish and allows stable engagement during shoulder and face milling, aiding dimensional consistency. Is the insert compatible with standard tool holders? The insert follows the BCMT designation and is intended for compatible indexable milling holders; correct seat and clamping must be used to ensure stable performance. What maintenance practice extends tool life? Monitoring wear and adjusting cutting parameters progressively when using the WKP35S grade helps extend edge life; the coated substrate of the insert reduces wear but benefits from process optimisation. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; info@walter-tools.com The Walter AG (brand: Walter Tools) is part of the Sandvik group and is a recognised manufacturer of precision cutting tools. Protected trademarks and trade names remain the property of their respective owners. The described article is an original, factory-new product from the manufacturer.
BCMT120408R-K55 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of a coated-carbide grade designed for heat resistance and stable cutting; the combination of Tiger·tec Gold technology and the K55 chipbreaker ensures secure chip formation in demanding materials and consistent cutting-edge stability. For purchase or application advice, contact Metav Werkzeuge or request tailored consultation. BCMT120408R-K55 WSM35G fräswendeschneidplatte by Walter Tools — Tiger·tec Gold coated carbide, K55 chipbreaker BCMT120408R-K55 WSM35G is a coated-carbide milling insert optimised for heavy-duty machining of stainless steels and heat-resistant superalloys, featuring a parallelogram 75° geometry for versatile milling strategies Tiger·tec Gold coating for thermal stability Optimised chip control K55 for secure chips Parallelogram 75° geometry for versatile milling Suitable for stainless steels and superalloys Consistent performance in high-temperature materials The combination of the WSM35G grade and Tiger·tec Gold coating delivers elevated thermal resistance and wear protection, which translates into longer tool life when machining stainless steels and superalloys. The coated-carbide substrate and multilayer surface treatment reduce diffusion and adhesion at the cutting zone, enabling more reliable tool behaviour under thermal load. As a result, process reliability improves and scrap risk is lowered, making the insert an effective choice for production environments that require repeatable outcomes. Clean chip formation and secure cutting-edge stability The integrated chip control K55 is engineered to break and evacuate chips reliably, supporting continuous cutting even on challenging alloys. Combined with the insert’s design, the chipbreaker promotes stable cutting conditions and helps maintain the integrity of the cutting edge over longer cycles. This leads to improved surface finishes with fewer interruptions for chip clearing and reduces the likelihood of built-up edge formation, which benefits throughput and reduces downtime for tool changes. Geometry that supports flexible milling strategies A parallelogram 75° insert form with a 7° clearance and a 0.8 mm nose radius offers a balance between robustness and precision. The geometry allows for different approach angles and positive engagement in a variety of milling operations, from light finishing passes to more aggressive roughing when toolpaths are adapted. The insert thickness and face proportioning support mechanical stability at the tool holder, assisting repeatability and dimensional control across batches. Application scope and material suitability explained This grade is assigned to material groups M and S, which correspond to stainless steels (M) and heat-resistant superalloys and Titan (S) under ISO classifications. The specification indicates that the insert is particularly suited to workpieces that develop high temperatures at the cutting zone and that demand a combination of thermal resistance and stable edge retention. For operations where consistent chip control and edge life are priorities, this insert provides a practical technical solution without overcomplicating tooling choices. Contact Metav Werkzeuge for application-specific advice, original Walter Tools inserts and ordering support, including recommendations for cutter holders and milling strategies Technical Data Article number: BCMT120408R-K55-WSM35G-WALTER ISO designation: BCMT120408R-K55 WSM35G Type: Fräswendeschneidplatte Grade: WSM35G Series: Tiger-tec Gold Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Inscribed circle / size: 12 mm Plate thickness: 4 mm Tolerance class: M Special features Coating technology: Tiger·tec Gold Chipbreaker: K55 Geometry: Parallelogramm 75° Material groups: S / M Execution: T Suitable for: stainless steels, superalloys, Titan FAQ Is this insert suitable for machining stainless steels? Yes. The BCMT120408R-K55 WSM35G insert from Walter Tools is specified for material group M, indicating suitability for machining stainless steels under conditions that require thermal stability and secure chip formation. Can the insert be used on heat-resistant superalloys and titanium? Yes. The WSM35G grade and the Tiger·tec Gold coating are designed to handle the demands of material group S, which includes heat-resistant superalloys and Titan, offering improved wear resistance and edge life. What advantage does the K55 chipbreaker provide? The K55 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of long, entangling chips and supporting stable machining cycles with better surface quality when using the BCMT120408R-K55 WSM35G. Does the parallelogram 75° shape affect cutter compatibility? The parallelogram 75° geometry provides a versatile cutting angle suited to a variety of milling applications; compatibility with cutter bodies depends on the specific toolholder system, but the insert form is standard for holders designed for 75° parallelogram inserts. How does the 0.8 mm nose radius influence finish and stability? A 0.8 mm nose radius balances robustness and surface finish capability: it increases edge strength for roughing while still supporting acceptable surface results in finishing passes when process parameters are controlled. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands; the offered article is original, factory-new merchandise of the manufacturer.
BCMT120408R-K55 WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold PVD coating with the K55 chipbreaker and a 75° parallelogram geometry yields a milling insert that balances edge stability and chip control for mixed-material operations; order the BCMT120408R-K55 WSP45G directly via Metav Werkzeuge or request application advice from our consultants. BCMT120408R-K55 WSP45G – Milling insert with Tiger·tec Gold coating by Walter Tools BCMT120408R-K55 WSP45G is a versatile indexable milling insert designed for demanding steel, stainless steel and high-temperature alloy applications Tiger·tec Gold PVD coating for extended life Suited for steel, stainless and superalloys Parallelogram 75° geometry for stable milling 0.8 mm corner radius for reliable edge strength Boosted life and consistent chip control for mixed materials The BCMT120408R-K55 WSP45G benefits from the Tiger·tec Gold coating, a PVD-based technology that increases wear resistance while maintaining edge toughness. This combination supports secure chip formation across the ISO groups P / M / S, meaning unalloyed and alloyed steel, rostfreiem Stahl and heat-resistant superalloys or titanium can be machined with fewer interruptions. The result is reduced insert consumption and a more predictable machining cycle, which contributes to improved process efficiency and lower overall tooling costs. Geometry engineered for steadier cuts and better surface finishes The insert’s parallelogram 75° shape and 7° relief angle reduce axial engagement and vibration during slotting and face milling, while the 0.8 mm corner radius delivers enhanced edge strength for interrupted cuts. The K55 chipbreaker is optimised for controlled chip formation, helping to avoid chip entanglement and improving surface integrity. Together, these features promote consistent dimensional results and minimise the need for rework, particularly in mixed-production environments where part-to-part stability is crucial. Productivity through coating performance and versatile grade The WSP45G grade is a PVD-coated carbide designed for toughness and wide applicability in milling. The coating’s wear resistance allows for productive cutting parameters, extending effective tool life and reducing downtime caused by frequent insert changes. For operations prioritising throughput, the grade supports stable cutting edges under fluctuating thermal loads typical when switching between steel and rostfreiem Stahl, thus delivering measurable gains in machining performance and predictable change intervals. Practical integration and workshop advantages Tolerance class M and the standardised ISO designation facilitate straightforward toolholder compatibility and inventory management. The BCMT120408R-K55 profile fits many common milling cutters, enabling quick upgrades to existing toolsets without major setup changes. Support is available from Metav Werkzeuge for selection guidance or to clarify compatibility with specific cutter bodies and machining strategies, helping to streamline implementation and to maintain steady production flow. Contact Metav Werkzeuge for tailored application advice, sample availability or a formal quotation for the BCMT120408R-K55 WSP45G Tiger·tec Gold milling insert – info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: BCMT120408R-K55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT120408R-K55 WSP45G Walter Tools SKU: BCMT120408R-K55-WSP45G-WALTER Facts Relief angle: 7° Corner radius: 0.8 mm Insert size: 12 Plate thickness: 04 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: K55 Geometry: Parallelogram 75° Applicable materials: P / M / S Execution: T Plate form: Parallelogramm 75° FAQ What materials can be machined with this insert? The BCMT120408R-K55 WSP45G is suitable for machining materials in ISO groups P (steel), M (rostfreiem Stahl) and S (heat-resistant superalloys and titanium). What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold increases wear resistance while preserving edge toughness, enabling longer tool life and more consistent performance under mixed-material milling conditions. How does the insert geometry affect milling performance? The parallelogram 75° geometry and 7° relief reduce vibration and axial loads, while the 0.8 mm corner radius improves edge strength for interrupted cuts and better surface quality. Which chipbreaker is used and why is it important? The insert uses the K55 chipbreaker, which is designed for controlled chip formation to reduce entanglement and improve chip evacuation during face and slot milling. Is the insert compatible with standard toolholders? The BCMT120408R-K55 follows ISO designation standards and tolerance class M, making it compatible with many common indexable milling cutter systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered article is an original, factory-new product of the manufacturer.
BCMT120412L-G55 WKP35G WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold technology and the WKP35G grade for reliable performance in steel and cast iron machining; the G55 chipbreaker and a 1.2 mm corner radius deliver consistent chip control and surface quality. Order the BCMT120412L-G55 WKP35G directly via Metav Werkzeuge or speak to our consultants for application advice. BCMT120412L-G55 WKP35G — milling indexable insert, Tiger·tec Gold, for steel and cast iron — Walter Tools A BCMT120412L-G55 WKP35G milling indexable insert designed for controlled chip formation and long tool life in steel and cast iron machining Tiger·tec Gold coated grade WKP35G Optimised chip control with G55 breaker Parallelogram 75° for secure clamping Corner radius 1.2 mm for stable cutting High-performance grade for demanding materials The BCMT120412L-G55 WKP35G is based on the WKP35G cutting grade within the Tiger·tec Gold family, a coated carbide solution engineered for consistent wear resistance. This combination is particularly effective for machining steel and cast iron, where thermal loads and abrasive wear challenge tool life. The coating technology reduces flank wear and maintains edge stability, which translates into longer intervals between indexings and fewer tool changes. For production environments this means improved uptime and a steadier surface finish on workpieces. Geometry and chip control that stabilise the cut The insert’s G55 chipbreaker and parallelogram 75° form work together to manage chip flow and cutting forces. The chipbreaker promotes predictable, short chips on interrupted and continuous cuts, while the angled plate form gives a positive engagement that helps with secure clamping in milling cutters. The combination of a 7° relief angle and a 1.2 mm corner radius contributes to a robust cutting edge that resists chipping and supports stable depth-of-cut choices. These geometric features reduce vibration and improve dimensional stability across batch runs. Process reliability and economical machining With tolerance class M and execution T, the insert supports repeatable positioning and consistent performance in automated tool systems. Suitability for both P (steel) and K (cast iron) materials makes this insert versatile for mixed production environments, reducing the need for frequent tool changes. The optimised wear behaviour of the grade leads to predictable tool-life windows, facilitating reliable production planning and cost-per-part calculations. For workshop teams seeking a balance of productivity and surface quality, the insert offers measurable advantages in cycle stability and overall machining economy. Contact Metav Werkzeuge for tailored application support and availability of Walter Tools Tiger·tec Gold inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: BCMT120412L-G55-WKP35G-WALTER Description: Fräswendeschneidplatte BCMT120412L-G55 WKP35G Manufacturer: Walter Tools Core specifications Size: 12 Thickness: 04 Relief angle: 7° Corner radius: 1.2 Chipbreaker: G55 Tolerance class: M Design and applications Grade: WKP35G (Tiger·tec Gold) Suitable for: Steel (P) and cast iron (K) Plate form: Parallelogram 75° Series/ID: BCMT120412L-G55 WKP35G Execution: T FAQ What materials is this insert suitable for? The BCMT120412L-G55 WKP35G is designed for machining steel (P) and cast iron (K) according to its WKP35G grade and Tiger·tec Gold technology. How does the G55 chipbreaker affect machining? The G55 chipbreaker promotes controlled, short chips and stabilises chip evacuation, which improves surface finish and reduces the risk of chip-related damage during milling. What advantage does the parallelogram 75° form provide? The parallelogram 75° geometry offers positive engagement and secure clamping in milling cutters, aiding repeatable positioning and reducing the chance of insert movement under load. Is the corner radius of 1.2 suitable for heavy cuts? A 1.2 mm corner radius provides a stronger cutting edge that resists chipping, making it appropriate for more robust cutting parameters while still delivering good surface quality. What does the Tiger·tec Gold technology deliver in everyday use? Tiger·tec Gold coating improves wear resistance and edge stability, resulting in longer tool life, consistent part quality, and fewer indexings during production. Manufacturer / Responsible: Walter Tools GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names such as Walter Tools are mentioned for explanation and product identification only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the stated manufacturer.
BCMT120412L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD coating, robust chip control and a versatile geometry for consistent milling across steel, stainless steel and heat‑resistant alloys — order the insert directly via Metav Werkzeuge or consult our specialists for application advice. BCMT120412L-G55 WSP45G milling insert – Tiger·tec Gold, 7° relief (Walter Tools) The BCMT120412L-G55 WSP45G is a coated carbide milling insert from the Tiger·tec Gold series, engineered for versatile milling of steel, stainless steel and heat‑resistant superalloys. Tiger·tec Gold PVD coating for stable edges Suitable for steel, stainless steel and superalloys 7° relief angle for secure chip formation Parallelogram 75° shape with 1.2 mm corner radius High‑performance coating for longer edge life The combination of the Tiger·tec Gold series and a PVD coating produces a wear‑resistant surface that supports stable cutting edges under elevated temperatures. This coated carbide grade delivers consistent performance when machining demanding workpiece materials, reducing unscheduled tool changes and improving process uptime. The description of the material grade highlights its toughness and versatility, which helps maintain predictable tool life in mixed‑batch production. Geometry that improves chip control and surface finish The parallelogram 75° shape and modest 7° relief angle pair with the chipbreaker G55 to promote controlled chip formation and evacuation during milling. The 1.2 mm corner radius balances edge strength with the ability to produce good surface finishes; the geometry is therefore suitable for stable roughing as well as semi‑finishing passes. Engineers will appreciate that the insert’s design focuses on reliable chip behaviour, which in turn reduces rework and enhances dimensional consistency on machined components. Versatile use across materials and process windows Designed for use on the ISO material groups P / M / S — that is, steel, stainless steel and superalloys / titanium — the grade WSP45G provides a resilient cutting edge for a wide range of applications. The insert’s tolerance class M and the standard plate form make it a pragmatic choice for job shops and production lines requiring reproducible performance. When paired with appropriate cutting parameters and a suitable toolholder, this insert supports efficient material removal while preserving edge integrity in challenging cut conditions. Contact Metav Werkzeuge for tailored recommendations on tooling layouts and availability of BCMT120412L-G55 WSP45G inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss optimal use in specific applications Technical data SKU: BCMT120412L-G55-WSP45G-WALTER Article: Fräswendeschneidplatte BCMT120412L-G55 WSP45G Brand: Walter Tools Facts Relief angle: 7° Corner radius: 1.2 mm Size: 12 Thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold (PVD) Grade: WSP45G Chipbreaker: G55 Plate form: Parallelogram 75° Material applicability: steel, stainless steel, superalloys Series: Tiger·tec Gold Execution: T Designation: BCMT120412L-G55 FAQ Is this insert suitable for machining stainless steels? Yes. The BCMT120412L-G55 WSP45G insert is specified for ISO group M and is designed to support chip control and edge stability when machining stainless steel. Can the insert be used on titanium or heat‑resistant alloys? Yes. The WSP45G grade and the Tiger·tec Gold coating allow the insert to be used on ISO group S materials, including heat‑resistant superalloys and titanium, where heat resistance and edge stability are required. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating on this Walter Tools insert enhances wear resistance and supports a more stable cutting edge, which helps to extend tool life and maintain process reliability in milling operations. Is the geometry suited to both roughing and finishing? The combination of the parallelogram 75° shape, 1.2 mm corner radius and chipbreaker G55 offers a balance that supports both efficient material removal and acceptable surface finish in semi‑finishing; selection of cutting parameters will determine suitability for final finishing. What does the tolerance class M mean for repeated production runs? Tolerance class M indicates consistent manufacturing accuracy of the insert, which contributes to reproducible clamping and predictable performance across multiple indexings and production cycles. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names are used for explanation only. There is no affiliation between our company and the named brands. The item offered is an original, factory‑new product from the manufacturer.
BCMT120412R-G55 WKP35G Wendeplatten - Walter Tools
High-performance productivity and consistent chip control from the WKP35G grade combine to deliver reliable tool life and reduced machining costs; order the insert directly via Metav Werkzeuge or ask the consultants for application support. BCMT120412R-G55 WKP35G milling insert (Parallelogram 75°, 1.2 mm corner radius) — Walter Tools The BCMT120412R-G55 WKP35G is a Tiger·tec Gold coated milling insert designed for productive machining of steel and cast iron with reliable chip control and edge stability Tiger·tec Gold coating for durable edge G55 chipbreaker for stable chip control Parallelogram 75° geometry for versatile milling 1.2 mm corner radius for improved strength Maximise uptime with wear-resistant Tiger·tec Gold grade The coated carbide WKP35G grade, part of the Tiger·tec Gold series, offers a balanced combination of wear resistance and thermal stability for high-volume milling. The multilayer coating reduces abrasive and adhesive wear on the cutting edge, which translates into longer tool life and fewer indexings. For manufacturers working with alloyed and unalloyed steel, this means fewer tool changes and a steadier production flow, improving overall equipment effectiveness and process economy. Consistent chip control and improved surface quality The G55 chipbreaker is engineered to produce predictable, controlled chips when machining both steel and cast iron. Controlled chip formation reduces the risk of built-up edge and prevents chip entanglement, supporting safer high-feed and interrupted cuts. As a consequence, surface finish remains more consistent and downstream finishing operations are often reduced. The insert’s geometry contributes directly to surface integrity and repeatable results. Stable geometry for secure clamping and versatile feeds The parallelogram 75° shape and 1.2 mm corner radius deliver mechanical strength and flexible cutting engagement. The form factor supports a range of axial and radial depths of cut while maintaining edge support under moderate loads. A modest relief angle of 7° helps to balance cutting forces and reduce friction at the cutting zone. These geometric choices make the insert suitable for a variety of milling strategies, from light finishing to more aggressive semi-finishing passes. Clear material suitability and efficient process selection Classified for ISO groups P and K, the insert is intended primarily for steel and cast iron applications. The coated carbide grade is optimised for the thermal and mechanical demands of these materials: it copes with the heat and typical chip forms of steel and withstands the abrasive nature of many cast irons. When combined with an appropriate feed and speed strategy, the result is economical machining with predictable tool life and reproducible component quality. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and secure supply for BCMT120412R-G55 WKP35G from stock Technical data Article number: BCMT120412R-G55-WKP35G-WALTER Designation: BCMT120412R-G55 WKP35G Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WKP35G Facts Insert size: 12 Thickness: 04 Relief angle: 7° Corner radius: 1.2 mm Tolerance class: M Special features Chipbreaker: G55 Geometry: Parallelogram 75° Grade type: coated carbide (WKP35G) Execution: T Material compatibility: P / K Suitable for steel: yes Suitable for cast iron: yes FAQ What materials is this insert suitable for? The BCMT120412R-G55 WKP35G milling insert is designed for ISO groups P and K, making it suitable for machining steel and cast iron with optimised wear resistance. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold coating on the WKP35G grade improves resistance to abrasive and adhesive wear, which helps maintain cutting-edge integrity and extends usable tool life in continuous milling operations. What is the purpose of the G55 chipbreaker? The G55 chipbreaker delivers controlled chip formation for safer chip evacuation and reduced built-up edge, supporting consistent surface finish and more reliable high-feed or interrupted cuts. Can the parallelogram 75° geometry be used for different milling strategies? Yes, the parallelogram 75° shape provides flexibility for a range of axial and radial engagements, enabling semi-finishing and finishing passes while maintaining a robust cutting edge. What machining advantages does the 1.2 mm corner radius offer? A 1.2 mm corner radius increases edge strength and distributes cutting forces more evenly, which is beneficial for moderately heavy cuts and improves edge life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the respective manufacturer.
BCMT120412R-G55 WKP35S Wendeplatten - Walter Tools
Die Kombination aus der Tiger‑tec Silver Beschichtung, der WKP35S Hartmetallsorte und dem G55 Spanbrecher sorgt für zuverlässige Standzeit und kontrollierte Spanbildung bei der Bearbeitung von Stahl und Gusseisen; die geometrische Auslegung (Parallelogramm 75°) erhöht die Prozessstabilität. Direkt über Metav Werkzeuge erhältlich oder technische Beratung anfordern. BCMT120412R‑G55 WKP35S — Indexable Milling Insert, Tiger‑tec Silver, for Steel & Cast Iron (Walter Tools) The BCMT120412R‑G55 WKP35S is an indexable milling insert optimised for productive milling in ISO P and K applications, offering a robust edge form and consistent chip control Tiger‑tec Silver coating for extended tool life G55 chipbreaker for controlled chip formation Parallelogram 75° insert geometry for stable cutting 1.2 mm corner radius for increased edge strength Engineered for extended tool life and repeatable performance The combination of the Tiger‑tec Silver coating with the WKP35S carbide grade delivers a balance of wear resistance and toughness that is particularly suited to the thermal and abrasive conditions encountered when machining steel and cast iron. The coating reduces flank and crater wear, extending the usable life of the cutting edge and maintaining dimensional accuracy over longer cycles. In production terms, this translates into fewer indexings and lower tooling consumption, supporting a more predictable process and reduced downtime. The designation from the Tiger‑tec Silver series signals modern multi‑layer coating technology engineered for industrial milling tasks. Geometry that improves stability and chip control The parallelogram 75° plate shape together with a 7° clearance angle and corner radius 1.2 mm creates a robust cutting edge that resists chipping under interrupted or heavy‑cut conditions. The G55 chipbreaker is engineered to produce short, controllable chips when machining both P and K materials, which eases chip evacuation and reduces the risk of built‑up edge. This geometry supports consistent surface finish and dimensional stability, allowing for predictable tool life and fewer process interventions during series production. Application scope and handling advantages for workshop use Designed as part of the Tiger‑tec Silver series, this indexable insert suits a range of general milling tasks where efficiency and repeatability are required. The insert’s size and form make it compatible with common milling cutter bodies specified for BCMT‑style plates. Use in catalogued or geometry‑dependent operations will typically see benefits in throughput and surface quality when replacing less advanced grades. For users less familiar with insert specifications: ISO group P refers to steel and K to cast iron; the insert’s material and chipbreaker are tuned to these groups to manage heat, abrasion and chip breakage characteristics effectively. Practical considerations for process integration Tolerance class M and the standardised plate designation ensure interchangeability within systems that accept BCMT‑style inserts, simplifying stocking and logistics. The series and grade selection supports a wide material coverage, so fewer grades are necessary to cover mixed workloads. When integrating into a machining process, consider cutter body compatibility, recommended cutting data from Walter Tools and appropriate coolant strategies to maximise tool life and part quality. For special alloys or atypical conditions, consult technical application data to align speeds, feeds and depth of cut with tool capabilities. Contact Metav Werkzeuge to discuss Walter Tools Tiger‑tec Silver inserts and receive tailored recommendations for cutting parameters and toolholder compatibility — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: BCMT120412R‑G55‑WKP35S‑WALTER Designation: BCMT120412R‑G55 WKP35S Product type: Indexable milling insert Facts Clearance angle: 7° Corner radius: 1.2 mm Insert size: 12 mm Geometry: Parallelogram 75° Tolerance class: M Thickness code: 04 Special features Coating: Tiger‑tec Silver Grade: WKP35S (coated carbide) Chipbreaker: G55 Series: Tiger‑tec Silver Suitable for steel (ISO P) Suitable for cast iron (ISO K) Execution: T Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The BCMT120412R‑G55 WKP35S insert is formulated for steel (ISO P) and cast iron (ISO K) applications. How does the Tiger‑tec Silver coating benefit production runs? The Tiger‑tec Silver coating on the WKP35S grade reduces wear and helps maintain edge integrity, resulting in longer tool life and more consistent component quality. What is the purpose of the G55 chipbreaker? The G55 chipbreaker produces short, controlled chips when machining P and K materials, improving chip evacuation and reducing the risk of built‑up edge. Is this insert compatible with standard BCMT toolholders? The BCMT120412R‑G55 geometry follows BCMT conventions and is intended for use with cutter bodies designed for BCMT‑style inserts; verify cutter body compatibility before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT120412R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold grade and the versatile WSP45G PVD coating for stable chip formation and extended tool life; the parallelogram 75° geometry with G55 chipbreaker supports secure milling across steel, stainless steel and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult our specialists for application‑specific recommendations. BCMT120412R-G55 WSP45G — indexable milling insert, Tiger‑tec Gold, Walter Tools The BCMT120412R-G55 WSP45G is a PVD‑coated indexable insert engineered for versatile milling applications, offering reliable edge stability and broad material coverage for general and demanding operations. Tiger·tec Gold PVD coating Versatile for P, M and S materials Parallelogram 75° geometry 1.2 mm corner radius and 7° clearance High‑performance grade for a wide range of materials The BCMT120412R-G55 WSP45G grade is based on Tiger‑tec Gold technology and combines a tough substrate with a wear‑resistant PVD layer to enable stable chip formation and predictable edge life. This makes the insert particularly suitable for machining steel, stainless steel and heat‑resistant alloys, where thermal loads and adhesive wear are frequent challenges. The G55 chipbreaker supports controlled chip evacuation, reducing the risk of built-up edge and ensuring consistent surface quality even under variable cutting conditions. Geometry optimised to reduce setup time and improve process security The insert’s parallelogram 75° shape and 7° clearance angle provide a balanced cutting engagement that lowers cutting forces and improves access in shoulder and face milling. The 1.2 mm corner radius contributes to edge robustness and extends interval between indexing or replacement, while the plate thickness and form ensure secure clamping and repeatable positioning. These design choices translate into fewer interruptions on the shopfloor and a higher first‑pass yield for serial and jobbing work alike. Productivity gains through longer life and predictable performance Using a versatile PVD‑coated grade such as WSP45G reduces tooling complexity by covering multiple workpiece groups with a single insert type, which supports higher tool utilisation and lower inventory. The combination of a tough substrate and protective coating results in long tool life and stable cutting behaviour, contributing to shorter overall process times and reduced total cost per component. Paired with the proven engineering from Walter Tools, the insert delivers repeatable results that simplify process parameter selection and minimise trial cuts. Contact Metav Werkzeuge for tailored machining advice on the Tiger‑tec Gold WSP45G insert and to arrange delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: BCMT120412R-G55-WSP45G-WALTER Article designation: BCMT120412R-G55 WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Facts Size: 12 Thickness: 04 Corner radius: 1.2 mm Clearance angle: 7° Plate form: Parallelogram 75° Tolerance class: M Design & features PVD‑coated carbide (WSP45G) G55 chipbreaker Suitable for steel, stainless steel and heat‑resistant alloys (P / M / S) Parallelogram 75° geometry for stable cutting Indexable milling insert FAQ What materials can this insert machine effectively? The BCMT120412R-G55 WSP45G insert is formulated for machining steel, stainless steel and heat‑resistant alloys, reflecting the P / M / S designation of the WSP45G grade. How does the G55 chipbreaker benefit milling operations? The G55 chipbreaker promotes controlled chip formation and evacuation, which helps to maintain a consistent cutting edge and enhances surface finish during milling. Is the insert suitable for high productivity applications? Yes, the combination of the Tiger‑tec Gold coating and the robust substrate delivers long tool life and reliable performance, making it appropriate for productive milling routines. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Mention of brand names serves explanatory purposes only and does not imply any affiliation between our company and the cited manufacturers. The offered item is an original, factory‑new product from the manufacturer.
BCMT120416L-G55 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of extended wear resistance from the Tiger·tec Gold coating and consistent chip control provided by the WKP35G grade to keep production reliable and predictable; order the insert directly via Metav Werkzeuge or consult our specialists for application support. BCMT120416L-G55 WKP35G – Indexable milling insert with Tiger·tec Gold coating (Walter Tools) A robust BCMT120416L-G55 WKP35G indexable milling insert engineered for efficient machining of Stahl and Gusseisen across a range of finishing and semi-finishing operations Tiger·tec Gold coating for extended wear resistance WKP35G grade for stable chip formation Optimised G55 chipbreaker for mixed materials Parallelogram 75° form with 7° clearance Consistent performance on Stahl and Gusseisen for predictable cycles The combination of the Tiger·tec Gold coating and the WKP35G grade offers a clear production advantage when machining Stahl and Gusseisen. The coated cemented carbide substrate is designed to resist abrasive wear and maintain edge stability under the thermally demanding conditions typical of steel cutting. This results in longer intervals between index changes, fewer unplanned stoppages and a more predictable throughput. For operations seeking improved component quality without frequent tool intervention, the coated grade supports repeatable surface finish and stable dimensional results. Geometry that protects the edge and reduces rework The insert’s parallelogram 75° form combined with a 7° clearance contributes directly to cutting stability and predictable engagement angles at the toolholder interface. The 1.6 mm corner radius reduces notch formation at interrupted cuts and supports a robust cutting edge when facing variable stock conditions. These geometric elements translate into fewer edge failures and more consistent part tolerances, reducing scrap and rework in series production. The tolerance class M underpins dimensional predictability for tight machining cycles. Chip control and process security for smoother machining Equipped with the G55 chipbreaker, the insert achieves controlled chip formation across a range of feeds and depths, which simplifies swarf management and reduces the risk of re-cutting. The chipbreaker geometry was developed to handle the combination of long and short chips that often occur when machining mixed batches of Stahl and Gusseisen, improving machine uptime. In practice, better chip control lowers the load on downstream handling and tool-cleaning routines, supporting a more efficient overall process. Practical advantages for workshop logistics and tool management The standardised ISO designation and compact dimensions make the insert straightforward to stock and rotate within existing tool programmes. The insert’s series identity, Tiger·tec Gold, simplifies grade selection when a balance of wear resistance and edge security is needed. With clearly defined features such as the G55 chipbreaker and the WKP35G grade, procurement and toolroom staff can quickly align cutting data and replacement schedules, reducing administration time and ensuring reliable supply chains for production-oriented workshops. For practical advice on integrating Tiger·tec Gold inserts from Walter Tools into current machining setups, contact Metav Werkzeuge for application support and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: BCMT120416L-G55-WKP35G-WALTER Designation: BCMT120416L-G55 WKP35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 1.6 mm Insert size: 12 Thickness: 04 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: G55 Material designation: P / K (Stahl, Gusseisen) Execution: T FAQ What materials is this insert suitable for? The BCMT120416L-G55 WKP35G insert from Walter Tools is designed for machining Stahl and Gusseisen, reflecting the P/K material designation and the Tiger·tec Gold coating characteristics. How does the G55 chipbreaker affect machining? The G55 chipbreaker promotes controlled chip formation under varied cutting conditions, improving swarf handling and reducing the risk of chip-related issues during machining with the BCMT120416L-G55 WKP35G. Does the insert geometry support interrupted cuts? Yes, the parallelogram 75° form with a 1.6 mm corner radius and 7° clearance provides edge strength and resilience, helping to withstand interrupted cut scenarios while maintaining surface quality. Can this grade be used for finishing and semi-finishing operations? The WKP35G grade, part of the Tiger·tec Gold series, is suitable for a range of finishing and semi-finishing applications on Stahl and Gusseisen, offering a balance of wear resistance and edge stability. What tolerance class is specified for dimensional predictability? This insert is supplied to tolerance class M, supporting consistent fitment and repeatable positioning in toolholders. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
BCMT120416L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold coating and the versatile WSP45G grade plus the proven G55 chipbreaker for stable chip control and longer tool life; order the insert directly via Metav Werkzeuge or request technical advice from our consultants. BCMT120416L-G55 WSP45G milling indexable insert — Tiger·tec Gold, 7° relief | Walter Tools BCMT120416L-G55 WSP45G is a milling indexable insert designed for versatile milling on a wide range of materials, combining a robust geometry with a PVD-coated grade for consistent process results Tiger·tec Gold PVD coating for long tool life Suitable for P / M / S materials Parallelogram 75° form for robust engagement 1.6 mm corner radius for consistent edge strength Longer productive runs through advanced coating performance The Tiger·tec Gold coating and the WSP45G grade deliver a balance of toughness and wear resistance that extends tool life in mixed-production environments. As a PVD-coated cemented carbide solution, this insert is tailored to manage the thermal and mechanical loads typical when machining Stahl, rostfreier Stahl and heat-resistant alloys. The result is fewer indexings, reduced tool-change downtime and improved machine availability — a clear rational benefit for cost-conscious production planning. Stable cutting geometry for predictable surface quality A parallelogram 75° plate form combined with a 7° relief angle and a 1.6 mm corner radius provides mechanical stability and consistent engagement in interrupted or heavy cuts. The G55 chipbreaker promotes controlled chip formation, lowering the risk of built-up edge and allowing for reproducible surface finishes and dimensional stability. This geometry supports both roughing and semi-finishing passes, improving throughput without sacrificing component quality. One grade across many materials for simplified inventory The WSP45G designation indicates a versatile grade suitable for the ISO material groups P, M and S: P = Stahl (unalloyed and alloyed steel), M = rostfreier Stahl, S = superalloys and Titan. Using a single insert grade across these groups reduces stock complexity and simplifies tool selection for mixed batches. Processes become easier to standardise, cycle times more predictable and procurement more efficient, which appeals to production engineers seeking consistent, repeatable machining outcomes. Contact Metav Werkzeuge for application-specific recommendations and availability of Walter Tools BCMT120416L-G55 WSP45G inserts Technical data SKU: BCMT120416L-G55-WSP45G-WALTER Designation: BCMT120416L-G55 WSP45G Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Grade: WSP45G Manufacturer: Walter Tools Core data Relief angle: 7° Corner radius: 1.6 mm Insert size: 12 mm Thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Chipbreaker: G55 Plate form: Parallelogram 75° Material suitability: P / M / S Grade type: PVD-coated cemented carbide FAQ Which materials can be machined with this insert? The BCMT120416L-G55 WSP45G milling insert by Walter Tools is suitable for ISO groups P, M and S — meaning Stahl, rostfreier Stahl and heat-resistant superalloys including Titan What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold PVD coating on the WSP45G grade improves wear resistance and edge stability, offering longer tool life and reliable performance in mixed-material production How does the plate geometry influence milling performance? The parallelogram 75° form with a 7° relief angle increases engagement stability and the 1.6 mm corner radius provides robust edge strength for interrupted cuts and consistent surface finish For which operations is this insert best suited? The insert is intended for versatile milling tasks, covering roughing and semi-finishing operations where predictable chip control and tool life are priority considerations Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no implied connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
BCMT120416R-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of a proven coating and grade combination for extended tool life and stable chip control; the insert’s G55 chipbreaker and WKP35G grade ensure productive milling of steel and cast iron while the parallelogram geometry and 7° relief support consistent surface quality — order directly via Metav Werkzeuge or consult the technical team for application support. BCMT120416R-G55 WKP35G milling indexable insert – Tiger·tec Gold, G55 chipbreaker (Walter Tools) The BCMT120416R-G55 WKP35G is a parallelogram milling insert designed for productive finishing and semi-finishing in steel and cast iron applications, combining the Tiger·tec Gold technology with a robust chipformer for controlled swarf evacuation Tiger·tec Gold for extended tool life Optimised G55 chipformer for consistent chips Parallelogram 75° geometry for stable cutting Suitable for Steel (P) and Cast iron (K) Longer service life through Tiger·tec Gold coating and WKP35G grade The combination of the Tiger·tec Gold family and the WKP35G grade is engineered to deliver wear resistance and predictable performance in mixed production environments. The advanced coating reduces abrasive wear and helps maintain a stable cutting edge over extended cycles, which translates into fewer index changes and longer productive runs. For operations focused on cost-efficiency, the coating-grade pairing reduces unplanned tool changes and improves overall machining uptime. The design supports standard milling strategies while protecting the carbide substrate during interrupted cuts and variable workpiece conditions. Consistent surface quality enabled by insert geometry and clearance Parallelogram geometry with a 75° orientation and a 7° relief angle provides a balance between radial engagement and axial stability, promoting a reliable surface finish. The 1.6 mm corner radius supports edge strength without sacrificing the ability to achieve tight tolerances; the tolerance class M ensures repeatable dimensions across inserts. These geometric features reduce vibration sensitivity and help maintain dimensional consistency part after part, which is especially valuable when finishing features where surface integrity and form accuracy matter. Effective chip control and broad material capability The G55 chipbreaker is tuned for swarf formation typical of steel and cast iron (ISO groups P and K), enabling short, controllable chips and reducing the risk of chip-related interruptions. This chip control improves evacuation in through-tool and peripheral milling, helping to protect the machine and workpiece. The insert’s application focus on P and K materials makes it a versatile choice for mixed production shops machining unalloyed, alloyed steels and various cast irons where both abrasive wear resistance and fracture resistance of the cutting edge are required. Contact Metav Werkzeuge today to discuss how the Walter Tools BCMT120416R-G55 WKP35G insert can be integrated into current tooling sets or to request application-specific recommendations Technical data Article number: BCMT120416R-G55-WKP35G-WALTER Label: Fräswendeschneidplatte BCMT120416R-G55 WKP35G Walter Tools Series: Tiger·tec Gold Facts Size: 12 mm Corner radius: 1.6 mm Relief angle: 7° Shape: Parallelogram 75° Thickness: 04 Tolerance class: M Special features Chipbreaker: G55 Grade: WKP35G Material group: P / K (Steel / Cast iron) Manufacturer: Walter Tools FAQ Is this insert suitable for machining steel? Yes. The BCMT120416R-G55 WKP35G is specified for the ISO group P (steel) and is optimised by the WKP35G grade and Tiger·tec Gold treatment for the heat and chip characteristics typical of steel machining. Can the insert be used for cast iron components? Yes. The insert’s G55 chipbreaker and the material group designation K indicate suitability for cast iron work, providing controlled chip formation and improved wear resistance on abrasive cast materials. What are the geometry advantages for finish milling? The parallelogram 75° form combined with a 7° relief angle and a 1.6 mm corner radius offers a stable cutting geometry that supports good surface finish and repeatable dimensional results while maintaining edge strength. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered article is an original factory-new product of the manufacturer.
BCMT120416R-G55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKP35S grade and a 1.6 mm corner radius for reliable, high‑productivity machining of steel and cast iron; order directly via Metav Werkzeuge or consult our specialists for cutting data and availability. BCMT120416R-G55 WKP35S — Milling insert, Tiger‑tec Silver coating, 1.6 mm corner radius (Walter Tools) A BCMT120416R-G55 WKP35S milling insert designed for productive machining of steel and cast iron, featuring a Tiger‑tec Silver coated carbide grade and a parallelogram 75° geometry. Tiger‑tec Silver coating for extended life WKP35S grade for steel and cast iron 7° clearance for stable cutting 1.6 mm corner radius for robust edge Proven coating and grade to extend tool life and reduce cost per part The combination of the Tiger‑tec Silver coating and the WKP35S carbide grade delivers higher resistance to abrasive wear and thermal loads typical when machining steel and cast iron. This results in longer tool life and fewer insert changes, which lowers the cost per machined part and increases uptime. The coating technology stabilises the cutting edge at elevated temperatures and helps maintain consistent performance across interrupted and continuous cuts, so process reliability is improved without additional setup complexity. Geometry that improves edge strength and chip control The parallelogram 75° insert geometry with a 1.6 mm corner radius combines strength and clearance to withstand heavy engagement and varied cutting directions. The 7° clearance angle reduces rubbing on the flank and promotes a clean shear zone, while the G55 chipbreaker supports predictable chip formation for many turning and milling strategies. These features jointly reduce vibration and contribute to a quieter process, better surface quality and lower rework rates in production environments. Designed for ISO P and K materials with clear application benefits Specified for material groups P (steel) and K (cast iron) according to ISO classifications, the insert is optimised for the typical heat generation and chip characteristics of these materials. For steel, the coated carbide helps resist built‑up edge and thermal softening; for cast iron, the grade and chipbreaker handle abrasive wear and short, breaking chips. This targeted design means fewer trial cuts are necessary and cutting parameters can be scaled with confidence when integrating the insert into existing toolholders and machining programmes. Practical dimensions and tolerance for consistent mounting and repeatability With the BCMT form factor and measured plate size of 12, thickness code 04 and tolerance class M, the insert fits common clamping systems and maintains repeatable seating for serial production. The robust corner and coating combination supports higher metal removal rates where indicated, while the insert form and tolerance class help ensure predictable clearance and consistent surface finish across batches — a material advantage for production planners seeking to reduce variation and machining costs. Discuss application‑specific recommendations and stock availability for the Walter Tools BCMT120416R-G55 WKP35S with Metav Werkzeuge — request cutting data or a technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: BCMT120416R-G55-WKP35S-WALTER Label: Fräswendeschneidplatte BCMT120416R-G55 WKP35S Walter Tools Manufacturer: Walter Tools Facts Corner radius: 1.6 mm Clearance angle: 7° Insert size: 12 Thickness code: 04 Tolerance class: M Special features Coating: Tiger‑tec Silver Grade: WKP35S Chipbreaker: G55 Geometry: Parallelogram 75° Machinable materials: steel (P), cast iron (K) Series: Tiger‑tec Silver FAQ Which materials is this insert suitable for? The BCMT120416R-G55 WKP35S from Walter Tools is specified for ISO groups P and K, making it suitable for steel and cast iron machining. What coating and grade are used on this insert? This Walter Tools milling insert uses the Tiger‑tec Silver coating and the WKP35S carbide grade to improve wear resistance and thermal stability. What are the key geometry values to consider? The insert features a parallelogram 75° form, a corner radius of 1.6 mm and a 7° clearance angle, which together balance edge strength and cutting stability. Which chipbreaker is integrated and what does it deliver? The G55 chipbreaker on the BCMT120416R-G55 WKP35S provides controlled chip formation for both continuous and interrupted cuts, improving surface finish and reducing rework. How does the tolerance class affect mounting and repeatability? With tolerance class M, the insert offers consistent seating and repeatable positioning in standard toolholders, supporting reliable batch production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only; there is no affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product of the stated manufacturer.
BCMT120416R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of a combination of high process security and targeted chip control to mill demanding materials efficiently; the coated WSM45X grade delivers stable cutting edges and reliable performance, while the G55 chipbreaker promotes controlled chip flow. Order directly via Metav Werkzeuge or consult our technical team for application-specific guidance. BCMT120416R-G55 WSM45X milling insert — Walter Tools, coated carbide for stainless and superalloys BCMT120416R-G55 WSM45X is a coated carbide milling insert designed for machining stainless steel and heat‑resistant superalloys, offering a robust solution for demanding production environments. Coated carbide grade WSM45X for tough materials Optimised chip control with G55 chipbreaker 7° clearance angle for secure cutting action Parallelogram 75° form with 1.6 mm nose radius Consistent cutting performance in hard-to-machine materials The WSM45X grade is a coated carbide designed specifically to meet the demands of stainless steel and heat‑resistant alloys. Its formulation and coating support secure chip formation and resist built‑up edge, which results in longer intervals between indexings and fewer unplanned tool changes. For production planners and process engineers, this grade offers a measurable improvement in uptime and component repeatability. The chip control geometry reduces the risk of long, entangling chips while maintaining a stable cutting edge even under elevated temperatures. Geometry tuned for precision and repeatability The parallelogram 75° insert form combined with a 7° clearance angle and a 1.6 mm nose radius delivers a balance of rigidity and accessibility for shoulder and face milling operations. This geometry provides secure seating in the cutter body and promotes predictable load distribution, which reduces vibration and improves surface finish. The G55 chipbreaker supports short, manageable chips and helps to maintain consistent cutting forces. Together, these features make the insert suitable for automated machining centres where process stability and component consistency are key performance indicators. Productivity gains and process security for manufacturing Designed as part of the Walter Schneidstoffsorte series, this insert focuses on achieving high process security and repeatable tool life in serial production. The combination of grade, chipbreaker and form reduces the frequency of tool intervention and supports higher feed rates within recommended parameters. Manufacturing operations processing components in stainless steel or nickel‑based alloys will find benefits in reduced rework and improved cycle time stability. The insert’s tolerance class M ensures consistent interchangeability, contributing to predictable setup and minimised scrap rates. Practical application notes and handling guidance Marked as BCMT120416R‑G55 WSM45X for clear identification, the insert is intended for use in tooling systems compatible with parallelogram‑style indexable cutters. Correct seating and torqueing of the clamping screws are essential to preserve the intended geometry and cutting behaviour; secure clamping supports the stable cutting edge and consistent chip evacuation. For specific cutting data, coolant strategy and machine‑setup recommendations, Metav Werkzeuge can provide tailored parameters to match material, machine power and desired surface finish. For application assistance or to discuss a machining trial using Walter Tools inserts, contact Metav Werkzeuge for expert advice and specification support — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: BCMT120416R-G55-WSM45X-WALTER Article name: BCMT120416R-G55 WSM45X Manufacturer: Walter Tools Facts Insert size: 12 Thickness: 04 Nose radius: 1.6 mm Clearance angle: 7° Insert form angle: 75° Tolerance class: M Special features Grade: WSM45X Series: Walter Schneidstoffsorte - Serie offen Material suitability: S / M Chipbreaker: G55 Execution: T Designation w/o grade: BCMT120416R-G55 Suitable for stainless steel (rostfreier Stahl) FAQ What materials is this insert designed to machine? The BCMT120416R‑G55 WSM45X insert from Walter Tools is formulated for stainless steel and heat‑resistant superalloys, offering enhanced chip control and edge stability for these groups. How does the G55 chipbreaker affect machining? The G55 chipbreaker on this insert produces shorter, controllable chips and helps maintain steady cutting forces, which improves process reliability and reduces the risk of chip interference. What does the 75° parallelogram form deliver in practice? The 75° parallelogram form provides secure seating and favourable cutting angles for shoulder and face milling, supporting rigidity and repeatable surface quality in production. Is the insert suitable for automated machining centres? Yes, the combination of coated carbide grade and consistent geometry makes the insert well suited to automated milling operations where repeatability and long tool life are priorities. Which designation should be quoted when ordering? Refer to the SKU BCMT120416R‑G55‑WSM45X‑WALTER or the ISO designation BCMT120416R‑G55 WSM45X when placing orders to ensure the correct grade and chipbreaker are supplied. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademark and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
BCMT120416R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSP45G grade for consistent, productive milling of Stahl, rostfreier Stahl and heat‑resistant superalloys; order the BCMT120416R-G55 WSP45G directly via Metav Werkzeuge or consult our specialists for material‑specific recommendations. BCMT120416R-G55 WSP45G milling insert — Tiger·tec Gold, 1.6 mm radius, 7° clearance — Walter Tools A BCMT120416R-G55 WSP45G is a robust milling insert designed for general milling applications, combining a Tiger·tec Gold PVD technology with a versatile WSP45G grade for demanding metalcutting tasks Tiger·tec Gold PVD coating for extended tool life Versatile WSP45G grade for P / M / S materials 75° parallelogram form for stable milling engagement 1.6 mm corner radius with 7° clearance angle Increased productivity through advanced coating and grade The highlighted combination of the Tiger·tec Gold coating and the WSP45G cutting grade translates into tangible process benefits: improved wear resistance and stable edge behaviour under the thermal and mechanical loads typical for milling. The PVD‑based coating supports longer tool life and more consistent surface finishes, while the grade is formulated for reliable chip formation. This results in fewer tool changes, reduced downtime and a more predictable machining cycle for series production or jobbing environments. Wide material compatibility for diverse shop needs Specified for P / M / S applications, the insert is suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys as well as Titan‑based materials. The WSP45G sort is engineered to handle the characteristic heat generation and chip behaviour of these groups; for example, improved edge stability under high temperatures reduces build‑up and flank wear when cutting stainless materials. Such versatility simplifies tool inventory and enables one grade to cover multiple workpiece types. Geometry that supports process security and chip control The parallelogram 75° insert form offers a stable cutting engagement and predictable cutting forces, while the G55 chipformer assists immediate chip control during milling passes. A 1.6 mm corner radius balances edge strength and accessible cutting geometry for a range of depths of cut, and the 7° clearance angle helps avoid rubbing on the flank. Together with a tolerance class M, these characteristics promote repeatable results and ease of integration into existing toolholders and milling strategies. Contact Metav Werkzeuge to discuss the Walter Tools BCMT120416R-G55 WSP45G for a specific application or to request material‑matched cutting data via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: BCMT120416R-G55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT120416R-G55 WSP45G Walter Tools Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Gold Grade: WSP45G Chipformer: G55 ISO designation: BCMT120416R-G55 WSP45G Execution: T Form: Parallelogram 75° Facts Plate size: 12 Corner radius: 1.6 mm Clearance angle: 7° Plate thickness code: 04 Tolerance class: M Special features Tiger·tec Gold PVD coating technology Material application: Stahl, rostfreier Stahl, heat‑resistant superalloys and Titan Versatile P / M / S grade for milling applications Parallelogram 75° plate form for stable cutting engagement Chip control: G55 FAQ Which materials can be machined with this insert? The BCMT120416R-G55 WSP45G from Walter Tools is intended for machining Stahl, rostfreier Stahl and heat‑resistant superalloys (P / M / S), offering a versatile option for mixed‑material production. What coating and grade does the insert use? This insert features the Tiger·tec Gold PVD coating in the WSP45G grade, a combination optimised by Walter Tools for improved wear resistance and secure chip formation in milling applications. What are the key geometry values to consider? Key geometry data for the BCMT120416R-G55 WSP45G are a 75° parallelogram form, a 1.6 mm corner radius and a 7° clearance angle; these contribute to stable cutting forces and reliable edge strength. Is the insert suitable for high‑temperature alloys and Titan? Yes, the WSP45G grade is designed to cope with the thermal and mechanical stresses of heat‑resistant superalloys and Titan, offering enhanced edge stability during demanding cuts. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original factory‑new product of Walter Tools.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com