Durable indexable inserts for efficient metalcutting
Indexable inserts are hardened cutting elements designed to deliver consistent material removal in metalworking, providing cost-effective tool life management and repeatable results for turning, milling and drilling operations. Suited for machining steel, stainless and heat-resistant alloys, these inserts offer rapid edge renewal and reduced downtime through simple indexing, while versions optimised for internal coolant significantly improve chip control and thermal management in demanding applications. By choosing the right insert grade and geometry you gain improved tool life, predictable wear behaviour and better surface finish thanks to enhanced chip control, with key benefits including wear-resistant carbide, internal coolant compatibility and reliable chip breaking.
BCMT120420L-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold wear resistance and the WKP35G grade to achieve productive, repeatable machining of steel and cast iron; order original Walter Tools inserts via Metav Werkzeuge for dependable delivery and application advice. BCMT120420L-G55 WKP35G – Indexable milling insert with Tiger·tec Gold coating for steel and cast iron | Walter Tools The BCMT120420L-G55 WKP35G indexable milling insert is designed for high-productivity milling operations on steel and cast iron, combining a Tiger·tec Gold coating with a G55 chipbreaker for stable chip control. Tiger·tec Gold coating for extended tool life WKP35G grade optimised for steel and cast iron Parallelogram 75° form for secure chip control 7° relief with 2 mm corner radius for stability Consistent productivity through optimised coating and grade The combination of the Tiger·tec Gold coating and the WKP35G carbide grade delivers a measurable increase in process reliability when machining ISO groups P and K (steel and cast iron). The coating reduces abrasive wear and thermal softening, which translates into longer cutting edge life and fewer tool changes. For production environments this means higher machine uptime and a lower cost per component—an economical advantage that becomes apparent across medium- to high-volume runs. The insert’s ability to maintain a stable cutting edge under the thermal and mechanical loads typical for steel machining supports predictable cycle times and consistent part quality. Geometry engineered for chip control and machining stability The parallelogram 75° form combined with the G55 chipbreaker is engineered to produce short, controllable chips on a wide range of steels and cast irons. The geometry promotes secure clamping and directs chips away from the cutting zone, reducing the risk of re-cutting and improving surface finish. The 7° relief angle enhances insert strength at the cutting edge while the 2 mm corner radius increases robustness against edge chipping, making the insert suitable for interrupted cuts and mixed-production shops. These geometric choices reduce unplanned downtime and help to maintain repeatable tolerances in demanding operations. Practical integration and reliable process behaviour Designed as a direct fit for standard milling toolholders, the insert offers straightforward integration into existing toolsets and machining programmes. The G55 chip control and Tiger·tec Gold technology support stable machining across varying workpiece materials classified under ISO P and K, reducing setup iterations and trial cuts. The insert’s tolerance class M ensures consistent seating and repeatable positioning in the cutter body, contributing to reproducible component geometry. For operations seeking to improve throughput while safeguarding surface integrity, this insert combines material versatility with process security. Contact Metav Werkzeuge to specify Walter Tools Tiger·tec Gold inserts for the intended application and to obtain tailored recommendations for toolholder compatibility and cutting parameters Technical data Article number: BCMT120420L-G55-WKP35G-WALTER Type: Indexable milling insert Designation: BCMT120420L-G55 WKP35G Core specifications Relief angle: 7° Corner radius: 2 Plate form: Parallelogram 75° Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Coating: Tiger·tec Gold Grade: WKP35G Chipbreaker: G55 Material suitability: P / K (steel and cast iron) Series: Tiger·tec Gold Execution: T Sort/series notes: Coated carbide, optimised for steel and cast iron; stable chip formation and broad material coverage FAQ What materials is this insert suitable for? The BCMT120420L-G55 WKP35G insert from Walter Tools is suitable for ISO groups P and K, meaning it is optimised for machining steel and cast iron. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold coating on the WKP35G grade improves wear resistance and thermal stability, resulting in longer tool life and more consistent cycle times for Walter Tools indexable milling inserts. Which chip control solution does this insert use? The insert features the G55 chipbreaker combined with a parallelogram 75° form to promote short, controlled chips and improved surface finish during milling of steel and cast iron. Is the insert compatible with common milling toolholders? Yes, the BCMT120420L-G55 WKP35G is designed for standard cutter bodies that accept BCMT-style inserts, offering reliable seating with tolerance class M. What advantages does the 2 mm corner radius provide? A 2 mm corner radius increases edge robustness and resistance to chipping, which is advantageous for interrupted cuts and mixed production, ensuring better process security with Walter Tools inserts. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT120420L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold PVD coating and the WSP45G grade delivers heat resistance and a stable cutting edge for productive milling of steel, stainless steel and heat‑resistant alloys; the parallelogram 75° geometry with 7° clearance and a 2 mm corner radius supports dependable chip control and repeatable results. Order the insert directly via Metav Werkzeuge or consult our technicians for process-adapted recommendations. BCMT120420L-G55 WSP45G milling insert — Tiger·tec Gold, for steel / stainless steel / Superalloys (Walter Tools) A BCMT120420L-G55 WSP45G is a parallelogram 75° milling insert with Tiger·tec Gold PVD coating designed for versatile milling of steel, stainless steel and heat‑resistant alloys such as titanium. Tiger·tec Gold PVD coating Suitable for P / M / S materials Parallelogram 75° geometry 7° clearance with 2 mm corner radius Durable coating and grade for higher cutting speeds The combination of Tiger·tec Gold and the WSP45G grade describes a PVD-coated carbide developed for demanding milling tasks. This coating increases thermal resistance and reduces flank wear, which in practice allows for elevated cutting speeds and longer tool life without compromising surface quality. Because the grade covers the material groups P / M / S, it is optimised for the heat generation and chip formation typical of steel, engineered for the adhesion-prone behaviour of stainless steel and robust enough for Superalloys and titanium. The result is a measurable gain in machining efficiency and fewer insert changes per shift. Geometry and chip control that stabilise production The parallelogram 75° form combined with the G55 chipbreaker provides a secure seat and a positive cutting approach that favours controlled chip flow. The modest 7° clearance reduces rubbing and minimises heat at the flank, while the 2 mm corner radius offers a compromise between edge strength and achievable surface finish. Together these features promote stable cutting edge behaviour during both interrupted cuts and continuous passes, reducing the risk of unexpected edge failure and supporting consistent part tolerances. Practical application guidance for reliable results This insert is suited to a range of milling tasks from medium‑roughing to finishing when robustness and reproducibility matter. The WSP45G sort is particularly effective where a balance between wear resistance and toughness is required; choose feeds and speeds according to machine rigidity and workpiece condition, and consider climb milling to enhance chip evacuation with the G55 breaker. For special alloys or unusually long runs, process trials and incremental optimisation are recommended to exploit the insert’s high productivity potential while preserving surface integrity. For tailored machining advice and to procure Walter Tools Tiger·tec Gold WSP45G inserts, contact Metav Werkzeuge by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss specific applications and supply options Technical data SKU: BCMT120420L-G55-WSP45G-WALTER Article: Milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G ISO designation: BCMT120420L-G55 WSP45G Core specifications Relief angle: 7° Corner radius: 2 mm Form: Parallelogram 75° Size: 12 Plate thickness code: 04 Tolerance class: M Materials & features Materials: P / M / S (steel / stainless steel / Superalloys/titanium) Chipbreaker: G55 Coating: Tiger·tec Gold (PVD) Execution: T Designation without grade: BCMT120420L-G55 FAQ Which materials is this insert intended for? The BCMT120420L-G55 WSP45G milling insert from Walter Tools is specified for the ISO groups P / M / S, meaning it machines steel, stainless steel and heat‑resistant Superalloys/titanium effectively. What advantage does the Tiger·tec Gold coating provide? Tiger·tec Gold is a PVD coating that increases thermal resistance and wear life; on the WSP45G grade it stabilises the cutting edge and enables higher cutting speeds with improved tool life. How does the parallelogram 75° geometry affect machining? The parallelogram 75° form gives a secure seat and positive cutting engagement, supporting stable chip flow and reducing the tendency for the insert to deflect under load. Is the 2 mm corner radius suitable for finishing? A 2 mm radius provides enhanced edge strength and is suitable for semi‑finishing and finishing where a balance between surface quality and edge durability is required; the G55 chipbreaker helps maintain consistent chip formation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new merchandise from the manufacturer.
BCMT120420R-G55 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WKP35G grade for extended tool life and steady machining results; the parallelogram 75° geometry with a 7° clearance and a 2 mm corner radius ensures stable cutting in steel and cast iron applications. Order the insert directly via Metav Werkzeuge or ask our consultants for machining recommendations. BCMT120420R-G55 WKP35G milling insert — Tiger·tec Gold, Walter Tools A BCMT120420R-G55 WKP35G milling insert designed for high‑productivity machining of steel and cast iron with robust chip control and repeatable performance Tiger·tec Gold coating for long tool life WKP35G grade for steel and cast iron machining Parallelogram 75° geometry for versatile milling Chipbreaker G55 for stable chip formation Maximise productivity with a coated, wear‑resistant grade The WKP35G grade, part of the Tiger·tec Gold series, combines a coated carbide substrate with optimised surface technology to resist abrasive wear and thermal loading during continuous milling. As an indexable insert, the geometry and coating work together to reduce flank wear and delay edge breakdown, which translates directly into fewer tool changes and higher spindle uptime. For operations focused on efficient material removal from steel and cast iron, this combination supports consistent cycle times and a measurable reduction in tooling-related downtime. Reliable chip control and surface quality for routine and demanding cuts The insert’s chipbreaker G55 and parallelogram 75° form are engineered to produce predictable, short chips on interrupted and continuous cuts. The 7° clearance angle and 2 mm corner radius promote stable cutting engagement and help maintain surface integrity on workpieces, reducing the need for secondary finishing in many applications. Because the grade is specified for ISO groups P and K, machinists can expect reliable performance across a broad range of unalloyed, alloyed steels and typical cast‑iron grades, improving first‑pass yield and part consistency. Practical integration and ordering for production workflows With a standardised ISO designation, the insert fits common milling holders and indexable tool systems, easing inventory management and tool changeover procedures. The moderate tolerance class and the insert’s geometry support repeatable positioning in multi‑station toolholders, contributing to dimensional stability in serial production. For machining engineers seeking to adapt cutting parameters, the coated grade permits a balanced approach between cutting speed and feed, enabling process optimisation that prioritises throughput without sacrificing component quality. For additional technical data or application examples, Metav Werkzeuge provides tailored guidance and machining parameter suggestions. For availability, delivery options and application advice on Walter Tools Tiger·tec Gold inserts contact Metav Werkzeuge for personalised recommendations and order assistance Technical data Article number: BCMT120420R-G55-WKP35G-WALTER Product label: Fräswendeschneidplatte BCMT120420R-G55 WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Clearance angle: 7° Corner radius: 2 mm Insert size: 12 Thickness code: 04 Tolerance class: M Special features Grade: WKP35G (coated carbide) Geometry: Parallelogram 75° Chipbreaker: G55 Material suitability: Steel (P) and Cast iron (K) according to ISO 513 Execution: T FAQ What materials is this insert suitable for? The BCMT120420R-G55 WKP35G insert is designed for steel (ISO P) and cast iron (ISO K) applications, reflecting the WKP35G grade’s balanced wear resistance and chip control. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WKP35G grade improves abrasion resistance and thermal stability, extending tool life and supporting higher cutting speeds in continuous milling. Which chipbreaker is integrated and what is its effect? The insert features the G55 chipbreaker, which promotes short, controllable chip formation and reduces the risk of long, tangled chips in both interrupted and continuous cuts. Is the parallelogram 75° geometry suitable for shoulder milling? Yes, the parallelogram 75° form offers versatile engagement angles that are well suited for shoulder and face milling operations while maintaining rigidity. What does the code BCMT120420R-G55 indicate? The ISO‑style code describes the insert geometry and size; BCMT denotes a parallelogram form, the numeric values relate to insert dimensions, and G55 identifies the chipbreaker. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are used for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
BCMT120420R-G55 WPP35G WPP35G Wendeplatten - Walter Tools
Maximise milling productivity through the proven combination of Tiger·tec Gold coating and the G55 chipbreaker for controlled chip formation and extended tool life; robust geometry and tolerance class M ensure consistent interchangeability. Order the BCMT120420R-G55 WPP35G directly via Metav Werkzeuge or consult our specialists for application-specific guidance. BCMT120420R-G55 WPP35G indexable milling insert by Walter Tools — Tiger·tec Gold for steel BCMT120420R-G55 WPP35G is an indexable milling insert designed for productive machining of steels, combining a Tiger·tec Gold grade with a G55 chipbreaker to improve process stability in general steel applications. Tiger·tec Gold coating for long tool life Optimised G55 chipbreaker for steel machining Parallelogram 75° form for secure seat Tolerance class M for consistent interchangeability Productive machining performance for steels The coated carbide grade WPP35G, developed within the Tiger·tec Gold series, is tailored to the demands of steel machining. The combination of a wear-resistant coated carbide substrate and a tuned chipbreaker delivers stable chip formation and reduced built-up edge under the thermal conditions typical for steel. This results in longer service intervals and fewer insert changes, which supports a more continuous production flow. The specification explicitly targets ISO group P materials, making the grade a dependable choice where repeatable performance and surface quality matter. Secure clamping and reliable geometry for repeatability The insert’s parallelogram 75° geometry provides a positive seat and a cutting approach beneficial for a range of milling strategies, from shoulder milling to light slotting. With tolerance class M, the component offers consistent interchangeability in indexable tool systems, reducing setup variability and downtime. The listed dimensions — plate size 12 and plate thickness 04 — combined with a corner radius of 2 contribute to predictable cutting behaviour; the modest clearance angle of 7° supports robust edge strength while maintaining acceptable cutting engagement. These geometric details translate directly into process reliability on the shop floor. Practical advantages that support productivity and quality The G55 chipbreaker is optimised for steel applications to promote short, controllable chips and efficient evacuation, reducing the risk of re-cutting and surface damage. As a result, users can expect improved workpiece finish and steadier cutting forces, which benefits fixture life and machine load. The grade’s balanced toughness and wear resistance suits a wide range of general steel operations where both productivity and tool life are required. For operations moving between roughing and finishing, the insert’s design supports consistent outcomes with fewer insert variants, simplifying tooling logistics and inventory. For tailored cutting recommendations or to secure original Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for application-specific advice at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants will assist with grade selection and process matching. Technical data SKU: BCMT120420R-G55-WPP35G-WALTER Designation: BCMT120420R-G55 WPP35G Manufacturer: Walter Tools Facts Size: 12 Thickness: 04 Clearance angle: 7° Corner radius: 2 Plate form: Parallelogram 75° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WPP35G Chipbreaker: G55 Material application: Steel (ISO P) Substrate: Coated carbide Execution: T FAQ Which materials is the BCMT120420R-G55 WPP35G suited for? The BCMT120420R-G55 WPP35G insert is primarily intended for ISO group P materials; it is optimised for machining various steel grades with stable chip control and thermal behaviour. What benefits does the G55 chipbreaker provide? The G55 chipbreaker on the BCMT120420R-G55 WPP35G promotes short, consistent chips and reliable evacuation when machining steel, helping to maintain surface quality and reduce the risk of re-cutting. What is special about the Tiger·tec Gold grade? Tiger·tec Gold is a Walter Tools coating and grade concept that combines enhanced wear resistance with thermal stability; in the BCMT120420R-G55 WPP35G it supports longer tool life during demanding steel operations. How does the parallelogram 75° shape affect milling? The parallelogram 75° form gives a secure seat and a stable approach angle, improving clamping reliability and offering favourable cutting geometry for a variety of milling tasks. Why is tolerance class M important for this insert? Tolerance class M ensures consistent dimensional accuracy and interchangeability between inserts and tool holders, which reduces setup time and improves repeatability in production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanation; there is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
BCMT120420R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance and the insert's geometry for consistent, productive milling. The robust WSP45G grade and 7° clearance ensure stable edge life and reliable chip control; order directly via Metav Werkzeuge or consult Metav’s technical advisors for optimal process integration. BCMT120420R-G55 WSP45G — Milling insert, Tiger·tec Gold (Parallelogram 75°) by Walter Tools The BCMT120420R-G55 WSP45G is a PVD-coated carbide milling insert designed for universal milling tasks on steels, stainless steels and heat-resistant alloys, combining edge stability with versatile geometry. Tiger·tec Gold PVD coating for edge stability Suitable for steel, stainless steel and superalloys Parallelogram 75° geometry for versatile milling 7° clearance and 2 mm corner radius for robust cutting Higher throughput through stable edge performance The combination of Tiger·tec Gold coating and a WSP45G PVD carbide substrate gives the insert consistent wear resistance and reliable cutting-edge behaviour. This translates into longer in-process time and fewer insert changes, supporting higher throughput on series and batch milling operations. The insert’s geometry promotes stable chip formation and reduced cutting forces, which in turn lowers machine load and contributes to predictable cycle times. Broad material capability with predictable machining behaviour Classified for the ISO groups P / M / S, the insert is balanced to manage thermal loads and chip formation across unalloyed and alloyed steel, stainless steel and heat-resistant superalloys or titanium. The G55 chipbreaker and Parallelogram 75° shape enable consistent chip control during shoulder milling and general face milling, reducing the risk of built-up edge on tough materials and improving surface finish. Technical terms such as P (steel), M (stainless) and S (superalloys/titanium) denote the intended workpiece families and indicate how the grade handles typical cutting challenges. Geometry and dimensions that aid flexibility and process security The insert’s 7° clearance and 2 mm corner radius support robust engagement at moderate depths, while the parallelogram 75° form allows versatile toolpath planning and stable side cutting. The thickness code 04 and plate size 12 (as specified) are compatible with a range of cutter bodies, enabling straightforward integration into existing tooling systems. These dimensional choices reduce chatter susceptibility and contribute to reproducible results across tool changes. Practical benefits and application guidance By using a grade optimised for toughness and temperature resistance, the insert achieves repeatable performance in mixed-material production runs and in demanding finishing steps. The focus on edge stability and chip control reduces the frequency of rework and supports consistent part quality, which is particularly relevant for job shops and in-process production lines aiming for uptime and low scrap rates. For tailored parameter settings and cutter selection, Metav Werkzeuge offers technical documentation and machining recommendations. Choose Walter Tools Tiger·tec Gold BCMT120420R-G55 WSP45G inserts for reliable, productive milling and contact Metav Werkzeuge for application-specific advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: BCMT120420R-G55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT120420R-G55 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Free angle: 7° Corner radius: 2 mm Plate size: 12 Thickness code: 04 Tolerance class: M Special features Series: Tiger-tec Gold Grade: WSP45G (PVD-coated carbide) Geometry: Parallelogram 75° Chipbreaker: G55 Material groups: P / M / S Execution: T Base designation: BCMT120420R-G55 Sort description: Zähe, vielseitige PVD-Sorte für Fräsanwendungen FAQ Which workpiece materials are suitable for this insert? The BCMT120420R-G55 WSP45G is specified for ISO groups P, M and S, making it suitable for steel, stainless steel and heat-resistant superalloys or titanium with machining strategies adapted to each group. What are the main advantages of the Tiger·tec Gold coating? The Tiger·tec Gold coating on this grade enhances edge stability and wear resistance, which typically extends tool life and supports consistent surface quality under higher cutting temperatures. For which milling operations is the parallelogram 75° geometry recommended? The parallelogram 75° form is versatile for face and shoulder milling, offering straightforward entry angles and good chip evacuation in intermittent and continuous cuts. How do the 7° clearance and 2 mm corner radius affect performance? The 7° clearance reduces rubbing on the flank face while the 2 mm corner radius increases robustness at the cutting edge, improving resistance to edge chipping during roughing and semi-finishing passes. Is this insert appropriate for mixed-production environments? Yes; the WSP45G grade’s balance of toughness and temperature resistance supports reproducible performance across different material families, making it suitable for mixed-production runs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Mention of brand names is for explanatory purposes only and does not imply any affiliation; the offered item is an original, factory-new product of the manufacturer.
BCMT120425R-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WKP35G grade for reliable cutting performance and consistent chip control; the result is improved tool life and stable machining for serial production. Order the insert directly via Metav Werkzeuge or consult the team for process-matched recommendations. Fräswendeschneidplatte BCMT120425R-G55 WKP35G by Walter Tools — Tiger·tec Gold, chipbreaker G55 The BCMT120425R-G55 WKP35G is a coated milling insert for versatile finishing and semi-finishing in metalworking, optimised for Stahl and Gusseisen machining Tiger·tec Gold coating for extended tool life Designed for machining Stahl and Gusseisen Parallelogram 75° geometry, 7° relief angle Chipbreaker G55 for controlled chip formation Longer productive runs thanks to Tiger·tec Gold coherence The Tiger·tec Gold coating combined with the WKP35G grade reduces flank and crater wear, supporting longer intervals between indexings. As a result, cycle times remain stable and production runs become more predictable. The coated carbide substrate is engineered for the thermal and abrasive demands of machining Stahl and Gusseisen, which means fewer unexpected tool changes and better overall equipment effectiveness. This section highlights the rational benefit: lower downtime and improved process economy through a robust coating technology. Geometry designed for process reliability and surface quality The parallelogram 75° shape and the 7° relief angle contribute to a secure seat in the cutter body and favourable cutting forces, while the 2.5 corner radius balances edge strength with acceptable surface finish. The G55 chipbreaker is tuned for controlled chip segmentation, reducing chip-related interruptions and improving swarf evacuation. For production environments this translates into fewer stoppages and a more consistent workpiece finish, supporting both operational efficiency and parts quality. Application range and handling advantages This insert is suitable for common catalogued turning and milling geometries where a coated indexable solution is required. The WKP35G grade is a coated carbide variety optimised for the ISO material groups P and K, making it a reliable option when machining Stahl and Gusseisen components. The tolerance class M and the execution designation indicate consistent dimensions and interchangeability in precision toolholders. Operators benefit from straightforward inventory handling and predictable performance across batches, which simplifies planning for medium- to high-volume production. Contact Metav Werkzeuge for application advice on Walter Tools Tiger·tec Gold inserts and request tailored cutting data via info@metav-werkzeuge.com or call +49 2822 7131930 to align the insert selection with the machining task Technical data Article number: BCMT120425R-G55-WKP35G-WALTER Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger-tec Gold Facts Corner radius: 2,5 Relief angle: 7° Plate form: Parallelogramm 75° Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Grade: WKP35G (coated carbide) Chipbreaker: G55 Material compatibility: Stahl, Gusseisen Execution: T Suitable for ISO material groups P and K FAQ What materials is this insert suitable for? The BCMT120425R-G55 WKP35G is specified for machining Stahl and Gusseisen, reflecting the WKP35G grade design and the Tiger·tec Gold coating. How does the G55 chipbreaker affect machining? The G55 chipbreaker promotes controlled chip formation and evacuation, improving swarf control and reducing the risk of chip-related interruptions during milling. What benefits does Tiger·tec Gold provide in production? Tiger·tec Gold coating increases wear resistance and thermal stability, which helps extend tool life and maintain consistent cutting performance in repetitive production tasks. Is the insert dimensionally consistent for automated tool change systems? Yes; the tolerance class M indicates dimensional consistency suitable for repeatable seating in precision toolholders and automated index changes. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and do not indicate any partnership or endorsement. The offered article is original, factory-new goods of the manufacturer.
BCMT120425R-G55 WKP35S Wendeplatten - Walter Tools
Benefit from a high-performance, Tiger‑tec Silver‑coated milling insert that combines reliable chip control and broad material suitability to keep machining stable and productive; order directly via Metav Werkzeuge or consult our specialists for cutting data and application support. BCMT120425R-G55 WKP35S milling insert – Tiger‑tec Silver for Steel and Cast iron | Walter Tools BCMT120425R-G55 WKP35S is a coated carbide milling insert optimised for productive machining of steel and cast iron, offering a stable chip control geometry and a robust corner radius for demanding operations Tiger‑tec Silver coating for long tool life WKP35S grade for steel and cast iron G55 chipbreaker for stable chip control High productivity through consistent chip control and wear resistance The Tiger‑tec Silver coating combined with the WKP35S grade delivers a measurable improvement in process stability and tool life. The G55 chipbreaker is designed to form short, controllable chips when machining both steel and cast iron, reducing downtime from chip-related interruptions. As a result, cycle times are more predictable and machine utilisation rises. For shops focusing on throughput and repeatability, this insert supports more reliable daily production without sacrificing surface quality. Geometry engineered for strength and finish With a parallelogram 75° form, a 7° free angle and a 2.5 mm corner radius, the insert balances cutting-edge strength with finishing capability. The geometry provides a larger cutting edge contact to withstand interrupted cuts while still enabling acceptable surface quality in semi-finish operations. The corner radius enhances edge stability during heavier cuts, decreasing the likelihood of premature edge chipping and helping maintain dimensional consistency across batches. Clear application scope and technical clarity for procurement Specified for the ISO material groups P (steel) and K (cast iron), this coated carbide grade suits a wide range of common workshop materials. The designation follows industry standards, making it straightforward to compare with alternative inserts. The plate's size and thickness designations are compatible with standard clamping systems for this insert family, simplifying stock management and tooling decisions for production planning. Practical benefit: less rework and higher uptime Stable chip formation and a tough coated grade reduce the frequency of unplanned tool changes and part rework. The combination of coating technology and substrate composition is geared towards maintaining a sharp edge under thermal and mechanical stress commonly encountered when machining steels and cast irons. This translates into fewer interruptions on the shop floor and a more controlled overall cost per component. Contact Metav Werkzeuge for tailored cutting parameters and to check compatibility with existing toolholders; Metav Werkzeuge can advise on optimal feed and speed recommendations for the Tiger‑tec Silver WKP35S insert. Technical Data Article number: BCMT120425R-G55-WKP35S-WALTER Product type: milling insert ISO designation: BCMT120425R-G55 WKP35S Facts Size designation: 12 Thickness designation: 04 Free angle: 7° Corner radius: 2.5 mm Tolerance class: M Special features Grade: WKP35S Coating: Tiger‑tec Silver Chipbreaker: G55 Shape: Parallelogram 75° Material suitability: Steel (P), Cast iron (K) Coated carbide insert FAQ Which materials is this insert suitable for? The BCMT120425R-G55 WKP35S insert is designed for ISO groups P and K, meaning it is suitable for machining steel and cast iron in a wide range of production tasks. What benefits does the Tiger‑tec Silver coating provide? Tiger‑tec Silver coating on the WKP35S grade enhances wear resistance and thermal stability, helping the insert retain cutting performance over longer tool life and under higher process temperatures. How does the G55 chipbreaker influence machining? The G55 chipbreaker is engineered for stable, short chips when cutting steels and cast irons, improving chip evacuation and reducing the risk of chip entanglement that can interrupt machining. What does the 2.5 mm corner radius mean for finished parts? A 2.5 mm corner radius increases edge robustness and reduces the chance of edge damage in heavier cuts; it supports consistent dimensional results and can help achieve acceptable surface quality in semi‑finishing. How is the ISO designation interpreted for ordering and stocking? The ISO designation BCMT120425R-G55 WKP35S identifies the insert geometry, size designation and chipbreaker/grade combination, simplifying ordering and ensuring compatibility with standard toolholders used for this insert form. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new merchandise from the manufacturer.
BCMT120425R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from a robust combination of Tiger·tec Gold coating and the WSP45G grade for extended tool life and stable chip control; the insert’s parallelogram geometry and generous corner radius support secure, productive milling. Order the BCMT120425R-G55 WSP45G milling insert via Metav Werkzeuge or consult the team for application advice. BCMT120425R-G55 WSP45G milling insert, Parallelogram 75°, Tiger·tec Gold – Walter Tools The BCMT120425R-G55 WSP45G is a coated carbide milling insert engineered for versatile face and shoulder milling across steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating WSP45G: tough, versatile grade Parallelogram 75° form for axial stability 2.5 mm corner radius for edge strength Consistent cutting performance with a modern coating system The combination of the Tiger·tec Gold coating and the WSP45G cutting grade delivers a balance between wear resistance and edge stability. This coated carbide solution is formulated to cope with the heat and adhesive wear typical of turning and milling operations in P / M / S materials, which means fewer unscheduled insert changes and more predictable process windows. For production environments prioritising uptime, the insertion of a robust PVD-coated grade reduces the incidence of premature flank wear and contributes to consistent component tolerances. Geometry that stabilises demanding milling operations The Parallelogram 75° plate form together with a 7° free angle and a 2.5 mm corner radius is selected to support stable axial engagement and high edge strength. The geometry minimises vibration in interrupted cuts and spreads cutting forces across the insert body, which improves surface finish and prolongs edge life. When paired with appropriate cutter bodies, this configuration offers controlled chip formation and repeatable positioning during aggressive feed and depth settings. Better chip control and reliable surface quality The dedicated G55 chipbreaker promotes orderly chip evacuation and reduces the risk of built-up edge when machining sticky or work-hardening materials. Combined with tolerance class M, the insert provides consistent seating and repeatable results in modular toolholders. The result is a measurable reduction in secondary operations for surface correction and fewer tool changes per production cycle, helping to streamline process flows in batch and continuous manufacturing. Practical advantages for workshop logistics and deployment Standardised dimensions such as Size 12 and Thickness code 04 simplify inventory management and tool selection for milling programmes. The insert’s adaptability across steel, stainless steel and high-temperature alloys reduces the number of grades required on the shelf, while the recognizable series and grade markings speed up identification during inspection and set-up. For workshops seeking predictable performance with minimal administrative overhead, this insert supports efficient tool life tracking and repeatable set-up procedures. For tailored recommendations on applying Walter Tools Tiger·tec Gold inserts in specific machining scenarios, contact Metav Werkzeuge for expert advice and availability: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: BCMT120425R-G55-WSP45G-WALTER Name: Fräswendeschneidplatte BCMT120425R-G55 WSP45G Brand: Walter Tools Product type: Fräswendeschneidplatte Numbers / Core technical data Free angle: 7° Corner radius: 2.5 mm Plate size: 12 mm Thickness code: 04 Designs / Special features Coating: Tiger·tec Gold (PVD) Grade: WSP45G Material suitability: P / M / S Plate form: Parallelogram 75° Chipbreaker: G55 Tolerance class: M FAQ What materials is this insert suitable for? The BCMT120425R-G55 WSP45G insert from Walter Tools is specified for machining P / M / S groups, i.e. steel, stainless steel and heat-resistant superalloys. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the BCMT120425R-G55 WSP45G improves wear resistance and thermal stability, extending tool life and enabling longer uninterrupted cycles. What is the advantage of the parallelogram 75° plate form? The parallelogram 75° form provides axial stability and improved clamping security for milling operations, helping the Walter Tools insert maintain consistent cutting geometry under load. Which chipbreaker is integrated and what does it achieve? This insert features the G55 chipbreaker, developed to create controlled chips and reduce the risk of built-up edge, which supports better surface finish and safer chip evacuation. What does tolerance class M mean for tool change consistency? Tolerance class M ensures uniform dimensions and seating accuracy, so the BCMT120425R-G55 WSP45G insert offers repeatable fit and predictable performance when replaced in the same toolholder. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; no relationship between Metav Werkzeuge and the named manufacturers is implied. The offered item is an original, factory-new product from the manufacturer Walter Tools.
BCMT120430L-G55 WKP35G Wendeplatten - Walter Tools
High wear resistance and predictable chip control from the Tiger·tec Gold grade make the BCMT120430L-G55 WKP35G a reliable choice for continuous milling of steel and cast iron; its 7° clearance and 3 mm corner radius support improved surface finish and extended tool life. Order the insert directly via Metav Werkzeuge or consult our application specialists for machining recommendations. BCMT120430L-G55 WKP35G – milling indexable insert, Tiger·tec Gold, for steel and cast iron | Walter Tools The BCMT120430L-G55 WKP35G is a coated carbide milling insert designed for productive roughing and finishing of steel (P) and cast iron (K) in ISO 513 tool chains. Tiger·tec Gold coating for extended life Designed for steel and cast iron machining Parallelogram 75° geometry for stable engagement 3 mm corner radius and 7° clearance angle Higher productivity through optimised grade and coating The WKP35G grade, integrated into the Tiger·tec Gold coating system, delivers a balance of wear resistance and thermal stability that directly improves machining throughput. As a coated carbide insert developed for Steel (P) and Cast iron (K), this geometry reduces flank wear and supports a consistent cutting edge under cyclic loads. The result is longer tool life and fewer indexings per component, which lowers downtime and overall production cost while maintaining repeatable results. Geometry that secures process stability and surface quality The parallelogram 75° form combined with a 7° clearance angle and a 3 mm corner radius gives predictable tool engagement and favourable chip flow. This configuration reduces vibration and supports better surface finishes on mid- to heavy-section cuts. The positive geometry helps to control cutting forces on standard cutter bodies, enabling stable material removal where consistent dimensional quality is required. For operations sensitive to edge chipping, the larger corner radius offers higher edge strength and improved resistance to mechanical shock. Practical benefits for the shop floor and tool management Using an indexable solution with the ISO designation and series alignment simplifies tooling logistics and toolholder compatibility. The BCMT family size and the G55 chipbreaker allow easy inventory standardisation and quick changeover in modular milling heads. As a Walter Tools product, the insert contributes to process reliability and predictable wear behaviour in mixed-production environments. For applications where both Steel and Cast iron must be machined, this insert reduces the need for multiple dedicated grades and supports efficient batch sequencing. Contact Metav Werkzeuge for tailored advice on Walter Tools Tiger·tec Gold inserts and to arrange application-specific recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BCMT120430L-G55-WKP35G-WALTER Label: Fräswendeschneidplatte BCMT120430L-G55 WKP35G Walter Tools Series: Tiger-tec Gold Grade: WKP35G Chipbreaker: G55 Geometry form: Parallelogram 75° Clearance angle: 7° Corner radius: 3 Plate size: 12 Thickness: 04 Tolerance class: M Material designation: P / K Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 3 mm Plate size: 12 Thickness designation: 04 Geometry angle: 75° (parallelogram) Tolerance class: M Special features Coating technology: Tiger·tec Gold Grade description: WKP35G (coated carbide) Suitable for: Steel (P) and Cast iron (K) according to ISO 513 Chip control: G55 chipbreaker Designation: BCMT120430L-G55 WKP35G Execution: T FAQ Which materials can be machined with this insert? The BCMT120430L-G55 WKP35G is suitable for machining Steel (P) and Cast iron (K) as defined by ISO 513; the WKP35G coated carbide grade is optimised for the thermal and abrasive conditions typical of these groups. What does the WKP35G grade offer compared with conventional grades? WKP35G, within the Tiger·tec Gold family, provides improved wear resistance and thermal stability compared with uncoated or conventional coatings, enabling longer tool life and more consistent chip formation when milling steel and cast iron. How does the geometry influence milling performance? The parallelogram 75° shape with a 7° clearance angle and a 3 mm corner radius ensures stable cutter engagement, promotes favourable chip flow with the G55 chipbreaker and improves surface finish while reducing the risk of edge chipping under interrupted cuts. Is the insert compatible with standard BCMT toolholders? Yes, the BCMT120430L-G55 WKP35G follows standard BCMT designation and is intended for use in compatible indexable milling toolholders that accept the BCMT form and size. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used solely for explanation. There is no connection between our company and the mentioned brands beyond the sale of original, factory-new items.
BCMT120430L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of high process reliability and versatile material capability offered by the Tiger·tec Gold cutting grade. The secure cutting geometry and stable edge performance support efficient milling cycles and predictable tool life; order the BCMT120430L-G55 WSP45G directly via Metav Werkzeuge or contact the consultants for tailored cutting data. BCMT120430L-G55 WSP45G milling indexable insert – Tiger·tec Gold, 7° clearance, 3 mm corner radius (Walter Tools) The BCMT120430L-G55 WSP45G is a Tiger·tec Gold PVD-coated milling insert designed for productive finishing and semi-finishing of steels, stainless steels and heat-resistant superalloys Tiger·tec Gold PVD coating Suitable for Steel, stainless and superalloys 7° clearance for secure cutting Parallelogram 75° form, 3 mm corner radius Consistent machining performance for reliable production The Tiger·tec Gold cutting technology delivers consistent cutting-edge stability and reproducible results even under demanding conditions. The combination of the PVD coating and the WSP45G grade reduces flank wear and supports stable chip formation when milling both conventional alloyed steels and more demanding materials. This stability translates into fewer tool changes and higher machine uptime, which benefits process planners aiming for predictable throughput and reduced downtime. Versatility across material groups for fewer tool variants The insert’s substrate and coating chemistry are optimised for the ISO groups P, M and S, enabling one grade to cover unalloyed and alloyed steel, stainless steel and high-temperature superalloys. The parallelogram 75° geometry and the 3 mm corner radius provide a balance between strength and surface finish, making the indexable insert suitable for both light finishing and more aggressive passes. As a result, inventory complexity is reduced while flexibility on the shop floor is increased. Geometry and edge preparation that support efficient chip control The included G55 chipbreaker and the modest 7° clearance angle promote a secure shearing action and controlled chip flow, which mitigates built-up edge formation on sticky materials such as stainless steels. The insert form and edge preparation are engineered to give consistent surface quality with reduced rework, thereby improving first-pass yield. For applications requiring repeatable surface integrity, this combination helps to maintain consistent part quality across production batches. Practical benefits for process engineers and operators By selecting the Tiger·tec Gold grade, process engineers gain an insert that emphasises a predictable tool life and wide applicability. The tool’s tolerance class and execution ensure compatibility with standard milling toolholders and straightforward seat positioning, simplifying tool set-up. Operators benefit from easier handling and robust edge behaviour during interrupted cuts; maintenance intervals become more regular and planning for tool replacement is simplified by the reproducible life expectancy of the insert. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts and secure optimised cutting parameters for the BCMT120430L-G55 WSP45G; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BCMT120430L-G55-WSP45G-WALTER Description: BCMT120430L-G55 WSP45G Manufacturer: Walter Tools Facts Plate size: 12 Thickness code: 04 Clearance angle: 7° Corner radius: 3 mm Special features Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: G55 Form: Parallelogram 75° Material suitability: P / M / S Execution: T Tolerance class: M FAQ What materials can this insert machine effectively? The BCMT120430L-G55 WSP45G insert from Walter Tools is suitable for machining steel, stainless steel and heat-resistant superalloys (ISO groups P, M and S). How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold PVD coating on this insert improves wear resistance and cutting-edge stability, which leads to longer tool life and more consistent part quality in milling operations. Which geometry features support chip control on difficult materials? The combination of the G55 chipbreaker, the parallelogram 75° form and the 7° clearance angle on the BCMT120430L-G55 promotes controlled chip formation and reduces built-up edge on sticky materials. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and Walter Tools. The offered item is original, factory-new goods of the manufacturer.
BCMT120430R-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the balance of Tiger·tec Gold wear resistance, the WKP35G grade’s toughness and the G55 chipbreaker for a productive, low-downtime milling process; order directly via Metav Werkzeuge or consult the technical advisors for cutting-data optimisation. BCMT120430R-G55 WKP35G milling insert — Tiger·tec Gold, G55 chipbreaker by Walter Tools The BCMT120430R-G55 WKP35G is a Walter Tools milling insert engineered for productive machining of steel and cast iron in industrial milling applications. Tiger·tec Gold coated grade WKP35G Optimised G55 chipbreaker for stable chips Parallelogram 75° form for secure clamping 7° clearance and 3 mm corner radius Boosted productivity through consistent chip control The Tiger·tec Gold technology combined with the WKP35G grade provides a coated carbide substrate designed for extended cutting performance when machining steel and cast iron. The specially developed G55 chipbreaker promotes predictable chip formation, reducing recutting and tool-related interruptions. This leads to a measurable improvement in cycle reliability and a reduction in unscheduled tool changes. The coating’s wear resistance also supports longer edge life, which contributes to lower tooling costs per finished component and a more stable production flow. Precision geometry for repeatable surface quality With a parallelogram 75° shape and a 7° clearance angle, the insert ensures a defined cutting position and effective relief behind the cutting edge, which helps to avoid rubbing and heat build-up. The 3 mm corner radius gives a robust cutting edge for roughing and semi-finishing passes while maintaining dimensional stability. The tolerance class M indicates consistent manufacturing accuracy, which simplifies process planning and guarantees repeatable surface finishes across batches. These geometric features together support predictable results in both one-off setups and series production. Versatility and reliable machining for workshop and production Rated for machining under the ISO groups P (steel) and K (cast iron), the insert is a versatile choice across mixed-production environments. The coated-hardmetal grade balances toughness and wear resistance, making it suitable for a wide range of feed and speed combinations. Practical benefits include reduced tooling complexity and fewer grade changes between workpiece families. For users seeking application support, cutting parameters or compatible toolholder recommendations, Metav Werkzeuge’s technical advisors can provide pragmatic guidance to achieve the desired productivity and surface integrity. Contact Metav Werkzeuge for tailored cutting-data advice and to arrange supply of Walter Tools Tiger·tec Gold WKP35G milling inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: BCMT120430R-G55-WKP35G-WALTER Article designation: BCMT120430R-G55 WKP35G Manufacturer: Walter Tools Product type: Fräswendeschneidplatte / Milling insert Facts Free angle: 7° Corner radius: 3 mm Size code: 12 Thickness code: 04 Plate form: Parallelogram 75° Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G (coated carbide) Chipbreaker: G55 Material suitability: P (steel) / K (cast iron) Execution: T FAQ What materials is this insert designed for? The BCMT120430R-G55 WKP35G insert is specified for machining steel (ISO group P) and cast iron (ISO group K) and is optimised for those material families under the Tiger·tec Gold technology. How does the G55 chipbreaker affect machining? The G55 chipbreaker on this Walter Tools insert promotes short, controlled chips for typical steel and cast-iron conditions, improving chip evacuation and reducing the risk of recutting. Is the geometry suitable for both roughing and finishing? With a 3 mm corner radius and robust coated grade WKP35G, the insert is well suited for roughing and semi-finishing operations; final-finishing passes may require a smaller radius or specific finishing geometry. What does the tolerance class M mean for production? Tolerance class M indicates consistent dimensional accuracy of the insert seats and cutting edges, supporting repeatable clamping and predictable workpiece results in series production. Can this insert be used on common Walter toolholders? The BCMT120430R-G55 WKP35G is a standard insert geometry compatible with toolholders designed for BCMT-style parallelogram 75° inserts; consult holder specifications for seat compatibility and clamping requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
BCMT120430R-G55 WKP35S WKP35S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the WKP35S carbide grade for extended tool life and consistent chip control when machining steel and cast iron; the insert’s Parallelogram 75° form with 7° clearance and a 3 mm corner radius ensures stable cutting and reliable surface quality. Order directly via Metav Werkzeuge or ask our consultants for application support. BCMT120430R-G55 WKP35S – Walter Tools indexable milling insert, Tiger·tec Silver, Parallelogram 75° A BCMT120430R-G55 WKP35S indexable milling insert designed for productive milling of steel and cast iron across general industrial applications Tiger·tec Silver coating for extended tool life WKP35S grade for steel and cast iron Parallelogram 75° form for pocketing versatility 7° clearance and 3 mm corner radius for cutting stability Faster throughput thanks to a modern coating and grade The combination of Tiger·tec Silver coating and the WKP35S carbide grade delivers tangible productivity gains in interrupted and continuous milling of group P (steel) and group K (cast iron) materials. The coating reduces abrasive and adhesive wear, which prolongs insert life and lowers tooling costs per part; the specially developed grade balances toughness and hardness to manage both heat and cutting stresses. For production planning this means fewer insert changes, more stable cycle times and improved process reliability. Geometry engineered for process security and surface quality The Parallelogram 75° shape together with the 7° clearance angle and 3 mm corner radius provides a robust cutting edge that resists chipping and ensures steady engagement in a variety of pocketing and face-milling operations. The chipbreaker G55 promotes controlled chip formation, reducing the risk of recutting and tool marks on the component. These geometric choices create a repeatable result: predictable tool behaviour and consistent surface finish even in mixed batch production, which supports throughput targets and downstream processes. Practical application scope and handling guidance Designed for versatile use, the insert suits machining tasks on steel (P) and cast iron (K) as classified by ISO 513. The tolerance class M and execution code T reflect manufacturing precision appropriate for industrial milling setups. The plate size and thickness coding support standard pockets and clamping systems; care in selecting compatible cutters and correct clamp torque preserves the insert’s performance. For tailored feeds and speeds or to match a specific toolbody, Metav Werkzeuge’s advisors can provide data-driven recommendations to optimise cutting conditions for each application. Contact Metav Werkzeuge for application advice, availability and to secure Walter Tools BCMT120430R-G55 WKP35S inserts for your production needs Technical data SKU: BCMT120430R-G55-WKP35S-WALTER Item designation: BCMT120430R-G55 WKP35S Series: Tiger·tec Silver Grade: WKP35S Execution: T Core technical data Shape: Parallelogram 75° Clearance angle: 7° Corner radius: 3 mm Insert size: 12 Thickness code: 04 Chipbreaker: G55 Tolerance class: M Material designation: P / K Designs / Special features Coating technology: Tiger·tec Silver Suitable for: steel (P) and cast iron (K) Manufacturer: Walter Tools Sort description: coated carbide FAQ What materials is this insert suitable for? The BCMT120430R-G55 WKP35S insert from Walter Tools is specified for ISO group P (steel) and ISO group K (cast iron), matching the intended use of the WKP35S grade. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver reduces abrasive wear and stabilises the cutting edge, so the WKP35S grade achieves longer life and more consistent performance in milling operations. Which geometric features support stable milling? The Parallelogram 75° form, 7° clearance and 3 mm corner radius work together to improve engagement stability and resist edge chipping during pocketing and face-milling. Is the chip formation controlled with this insert? Yes, the chipbreaker G55 on this insert promotes short, controllable chips suited to both steel and cast iron machining, reducing the risk of recutting. Can this insert be used in heavy interrupted cuts? The combination of WKP35S grade and the insert geometry is designed to balance toughness and edge strength, making it suitable for many interrupted milling tasks when used with proper cutter bodies and clamping Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes and do not imply any connection between our company and the named brands. The offered item is original factory‑new goods of the manufacturer.
BCMT120430R-G55 WSM45X WSM45X Wendeplatten - Walter Tools
Robust, coated carbide performance meets controlled chip formation: the WSM45X grade combined with the G55 chipbreaker delivers stable cutting edges and consistent results when machining stainless steel and heat‑resistant superalloys; order directly via Metav Werkzeuge or consult our specialists for tailored cutting data. BCMT120430R-G55 WSM45X — Milling indexable insert, WSM45X grade, G55 chipbreaker — Walter Tools The BCMT120430R-G55 WSM45X is a milling indexable insert engineered for demanding machining of stainless steel and heat‑resistant superalloys, offering a positive geometry and optimised chip control for high process stability Coated carbide grade WSM45X for tough materials G55 chipbreaker for secure chip control 75° parallelogram form for axial milling stability 7° relief and 3 corner radius for edge performance Stable cutting in high‑demand materials The WSM45X formulation is a coated carbide grade developed for applications with elevated thermal and mechanical loads. Designed for the ISO groups S and M, it is particularly effective on stainless steel and heat‑resistant superalloys (S), where poor thermal conductivity and tough material behaviour demand a combination of edge stability and wear resistance. The coated substrate supports secure chip formation and reduces the risk of built‑up edge, which in turn helps to maintain a predictable surface finish and consistent tool life. For production environments that prioritise uptime, this insert provides a measurable improvement in process reliability through its tailored material properties and chip‑breaking geometry. Geometry that improves productivity and tool life The 75° parallelogram profile provides axial stability and is well suited to milling strategies that require a secure seat in the toolholder and repeatable engagement angles. The integrated G55 chipbreaker channels chips away from the cutting zone, reducing recutting and machine downtime. A 7° relief angle creates a positive cutting action that lowers cutting forces and heat generation, while the 3 corner radius balances edge strength with finishing capability. Together, these geometric attributes enable higher metal removal rates with fewer tool changes, translating into lower cost per component and greater throughput in mixed‑material production. Practical process benefits and application guidance This insert is available in the BCMT120430R‑G55 designation and matches common clamping systems for axial milling operations. The combination of the WSM45X coating and the G55 chip control is particularly advantageous when machining long, stringy or thermally sensitive chips typical of stainless steel and certain superalloys. Process engineers will find that the insert supports predictable flank wear progression and consistent surface integrity, which simplifies quality control and post‑process inspection. For parameter selection, start from conservative speeds for unfamiliar alloys and increase until the wear pattern stabilises; the geometry is forgiving and aids in quick optimisation of cutting data. For machining stainless steel and high‑temperature alloys with confidence, select the Walter Tools BCMT120430R‑G55 WSM45X insert and contact Metav Werkzeuge for ordering and customised cutting recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: BCMT120430R-G55-WSM45X-WALTER Article designation: BCMT120430R-G55 Full designation: BCMT120430R-G55 WSM45X Product type: Milling indexable insert Manufacturer: Walter Tools Core specifications Grade: WSM45X Chipbreaker: G55 Relief angle: 7° Corner radius: 3 Insert size: 12 Thickness: 04 Tolerance class: M Material groups: S / M Design & application Parallelogram 75° insert form Coated carbide (WSM45X) Series: Walter Schneidstoffsorte - Serie offen Suitable for stainless steel and heat‑resistant superalloys Axial milling applications and positive engagement strategies FAQ What materials is this insert suited for? The BCMT120430R‑G55 WSM45X insert is designed for stainless steel and heat‑resistant superalloys (ISO groups M and S), where the WSM45X grade provides thermal and edge stability. How does the G55 chipbreaker help in production? The G55 chipbreaker on the BCMT120430R‑G55 promotes controlled chip fragmentation and evacuation, reducing recutting and improving process stability during continuous milling. Which geometry advantages does the parallelogram form provide? The 75° parallelogram form offers axial stability and secure seating in the toolholder, enabling repeatable engagement angles and improved surface finish in axial milling operations. Is the insert suitable for finishing and roughing applications? With its 3 corner radius and positive 7° relief, the insert balances edge strength and finishing capability, making it applicable to both finishing passes and moderate roughing when optimised cutting parameters are used. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; info@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new goods from the manufacturer.
BCMT120430R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSP45G grade and a parallelogram 75° geometry for consistent chip control and high productivity; order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. BCMT120430R-G55 WSP45G Milling Insert, Tiger·tec Gold – Walter Tools The BCMT120430R-G55 WSP45G is a coated carbide milling insert designed for versatile machining of steel, stainless steel and superalloys, offering reliable chip control in a compact parallelogram form. Tiger·tec Gold PVD coating for edge stability Suitable for steel, stainless steel and superalloys Parallelogram 75° geometry for axial milling 7° relief angle with 3 mm corner radius Higher material removal rates through a robust coating system The combination of Tiger·tec Gold technology and the WSP45G PVD grade provides a balance of hardness and toughness that supports elevated cutting parameters without compromising tool life. For demanding milling operations this means improved productivity through longer tool life and stable cutting edges, while the coated substrate reduces flank wear under thermal and mechanical load. Engineers and production managers will value the consistent performance in mixed-production environments where different steels and heat-resistant alloys are processed. Versatility that reduces tool inventory and downtime Built for multi-material capability, the insert covers ISO groups P, M and S — i.e. unalloyed and alloyed steel, stainless steel and heat-resistant superalloys — so one insert grade serves several roles on the shopfloor. The result is a simplified tooling inventory and fewer tool changes, which translates into less machine downtime and a leaner process chain. Practical advantages include reliable chip formation and repeatable surface quality when switching between roughing and finishing tasks. Geometry and cutting edge design that support secure chip control The parallelogram 75° shape and the specified relief geometry are more than form factors: they influence chip flow, engagement angle and axial cutting forces. The 75° approach provides a favourable cutting direction for axial milling operations, while the 7° relief angle and 3 mm corner radius increase edge strength and reduce the risk of chipping during interrupted cuts. These geometric features help maintain a balanced cutting action and contribute to stable chip formation, especially when machining tougher alloys. Proven brand performance and process security Manufactured under the Walter Tools family and the Tiger·tec Gold platform, this insert benefits from comprehensive development aimed at process security and reproducible results. The coated carbide grade is engineered for a wide range of applications and is suitable for shops seeking a dependable milling solution that combines robustness with predictable tool life. When consistent surface finish and dependable dimensional control matter, this insert offers a practical route to minimised rejects and steady production output. Contact Metav Werkzeuge today to discuss the BCMT120430R-G55 WSP45G for specific machining tasks or to arrange a cutting test; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: BCMT120430R-G55-WSP45G-WALTER Designation: BCMT120430R-G55 WSP45G Series: Tiger-tec Gold Grade: WSP45G Manufacturer: Walter Tools Numbers / Core technical data Free angle: 7° Corner radius: 3 Plate size: 12 Thickness: 04 Tolerance class: M Designs / Special features Parallelogram 75° plate form Chipbreaker: G55 Substrate / coating: coated carbide (PVD) Material application: P / M / S Execution: T FAQ What materials is the BCMT120430R-G55 WSP45G suitable for? The BCMT120430R-G55 WSP45G is specified for ISO groups P, M and S, meaning it can be used for various steels, rostfreier Stahl and heat‑resistant superalloys. How does the Tiger·tec Gold coating benefit cutting performance? The Tiger·tec Gold coating on the WSP45G grade increases edge stability and wear resistance, resulting in longer tool life and more consistent results under thermal and mechanical load. What milling applications suit this insert geometry? The parallelogram 75° geometry is particularly effective for axial milling operations and provides controlled chip flow and stable cutting forces in face and shoulder milling. Can this insert handle intermittent cuts or interrupted machining? With a 7° relief angle and a 3 mm corner radius, the insert offers enhanced edge strength that helps resist chipping during interrupted cuts, improving robustness in demanding scenarios. Who supplies and supports this insert? Walter Tools manufactures the insert; Metav Werkzeuge can provide application advice, tool selection support and supply details for the BCMT120430R-G55 WSP45G. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and product names belong to their respective owners. Mention of brand names or trade marks serves explanatory purposes only and does not imply any affiliation between Metav Werkzeuge and the named manufacturers.
BCMT120432R-G55 WKP35G Wendeplatten - Walter Tools
Benefit from a combination of durable Tiger‑tec Gold coating and the WKP35G grade for reliable wear resistance and broad material capability; the G55 chipbreaker and 75° parallelogram form ensure consistent chip control and stable cutting. Order the insert directly via Metav Werkzeuge or consult our machining specialists for application‑specific advice. BCMT120432R-G55 WKP35G milling insert (Tiger‑tec Gold, G55 chipbreaker) – Walter Tools A BCMT120432R-G55 WKP35G milling insert designed for medium‑duty machining of steel and cast‑iron, offering stable chip formation and extended tool life for production environments. Tiger‑tec Gold coating for process security WKP35G grade for steel and cast‑iron G55 chipbreaker for consistent chip control 75° parallelogram form, 3.2 mm corner radius High productivity through advanced coating and grade The Tiger‑tec Gold coating together with the WKP35G grade delivers a balanced combination of wear resistance and toughness. This makes the insert particularly suited to applications where thermal loading and varying chip forms occur, such as interrupted cuts or mixed batch production. The coating technology reduces flank and crater wear, which helps maintain dimensional stability over longer tool life and supports predictable process windows for repeatable results. Consistent chip control and geometric stability Thanks to the G55 chipbreaker and the 75° parallelogram geometry, the insert provides controlled chip segmentation and secure engagement in shoulder and face milling operations. The 3.2 mm corner radius increases stability at the cutting edge and helps avoid premature edge chipping, while the 7° relief supports reliable rake geometry and reduces rubbing on the flank. These features together result in smoother surface finish and fewer interruptions for tool changes. Practical advantages on the shop floor As a precision milling insert from Walter Tools, this grade is engineered for productivity: reduced tooling downtime, predictable wear curves and broad applicability to both steel and cast‑iron workpieces. The coated carbide substrate is optimised for stable chip formation, meaning fewer built‑up edge incidents and improved reproducibility across workpieces. For production planners and machinists, this translates into steadier cycle times and easier process optimisation. Guidance on typical applications and selection The insert is aimed at operations where a balance of wear resistance and chip control is required—roughing and semi‑finishing in unalloyed and alloyed steel and in cast‑iron components. Selection of feed, speed and depth of cut should consider machine rigidity and workpiece condition; when in doubt, refer to application tables from the manufacturer or contact a Metav Werkzeuge consultant for tailored recommendations. For shorter runs that demand accuracy and for longer runs that demand economy, the combination of grade and geometry supports both use cases. For machining advice and to configure tools for specific materials or machines, contact Metav Werkzeuge for a tailored recommendation on Walter Tools inserts: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BCMT120432R-G55-WKP35G-WALTER Designation: BCMT120432R-G55 WKP35G Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Gold Facts Relief angle: 7° Corner radius: 3.2 mm Shape: Parallelogram 75° Chipbreaker: G55 Tolerance class: M Thickness code: 04 Size code: 12 Special features Grade: WKP35G (coated carbide) Applicable workpiece groups: P (steel), K (cast‑iron) Execution code: T Base designation: BCMT120432R-G55 ISO designation: BCMT120432R-G55 WKP35G Series description: Tiger‑tec Gold; optimised for stable chip formation and broad material coverage FAQ What materials is this insert suitable for? The insert is designed primarily for steel (P) and cast‑iron (K) applications; the WKP35G grade and Tiger‑tec Gold coating are optimised for these groups. How does the G55 chipbreaker affect performance? The G55 chipbreaker provides consistent chip segmentation, improving evacuation and reducing the risk of chip entanglement in shoulder and face milling. What advantages does the Tiger‑tec Gold series offer? Tiger‑tec Gold coating increases wear resistance and thermal stability, which helps to extend tool life and maintain dimensional accuracy over longer production runs. Which geometry aspects support stable cutting? The 75° parallelogram form combined with a 3.2 mm corner radius and 7° relief ensures secure cutting engagement, improved edge strength and reliable surface finish. Is this insert suitable for interrupted cuts? Yes; the WKP35G grade and coated substrate are intended to handle varying chip loads and thermal cycles commonly encountered in interrupted machining. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is part of the Sandvik Group and is a global provider of precision tools for metalworking. Protected trademarks and product names are the property of their respective owners. Mark names and registered trademarks are mentioned solely for explanation and clarification; no affiliation between Metav Werkzeuge and the named brands is implied.
BCMT120432R-G55 WKP35S Wendeplatten - Walter Tools
High process reliability and extended tool life through the Tiger‑tec Silver coating combined with precise geometry for stable chip control and consistent surface finish. Order directly via Metav Werkzeuge or request consultant support for application-specific selection. BCMT120432R-G55 WKP35S — Milling insert (Fräswendeschneidplatte) for steel and cast iron, Tiger‑tec Silver (Walter Tools) The BCMT120432R-G55 WKP35S is a coated carbide milling insert designed for efficient machining of steel and cast iron in industrial production and batch machining. Tiger‑tec Silver coated carbide Optimised for steel and cast iron Parallelogram 75° geometry Corner radius 3.2 mm and 7° relief Consistent cutting performance and longer tool life with advanced coating The insert features the Tiger‑tec Silver coating and the WKP35S grade, combining high wear resistance with reliable micro‑edge stability. This coated carbide construction reduces flank wear and extends edge life under typical steel and cast iron cutting conditions, which supports predictable tool change intervals and lowers process costs. The coating technology improves resistance to thermal and abrasive loads, helping to maintain consistent surface quality across long runs. The result is fewer interruptions in production and improved reproducibility of critical dimensions. Geometry engineered for secure cutting and efficient chip control A parallelogram 75° shape together with the chipbreaker G55 provides a balance between rigidity and chip evacuation, reducing cutting forces during slotting and shoulder milling. The corner radius 3.2 mm and 7° relief give stable edge support and reduced vibration, which benefits both roughing and semi‑finishing operations. The insert geometry lowers the risk of built‑up edge and supports consistent chip breaking when machining varying cross‑sections. This leads to higher material removal rates and more efficient cycle times in serial production. Clear application scope and ISO‑aligned material groups The insert is specified for material groups P / K, meaning it is optimised for steel (P) and cast iron (K) according to ISO 513. The grade WKP35S is tuned for the thermal behaviour and chip formation typical of these groups, offering stable chip formation and broad applicability across unalloyed and alloyed steels, as well as grey and ductile cast irons. For customers requiring further machining data or cutting parameter recommendations, Metav Werkzeuge provides technical support and can supply application charts or trial recommendations; contact via info@metav-werkzeuge.com or +49 2822 7131930. Contact Metav Werkzeuge for tailored selection and rapid supply of Walter Tools Tiger‑tec Silver milling inserts — quote SKU BCMT120432R-G55-WKP35S-WALTER for precise advice Technical data SKU: BCMT120432R-G55-WKP35S-WALTER Label: Fräswendeschneidplatte BCMT120432R-G55 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Milling insert (Fräswendeschneidplatte) Series: Tiger‑tec Silver Facts Relief angle: 7° Corner radius: 3.2 mm Size designation: 12 Thickness designation: 04 Tolerance class: M Special features Grade: WKP35S Chipbreaker: G55 Geometry: Parallelogram 75° Material groups: P / K (steel / cast iron) Coated carbide Execution: T FAQ Which materials can this insert machine effectively? The BCMT120432R-G55 WKP35S insert is optimised for steel and cast iron (ISO groups P and K) and performs reliably across a wide range of unalloyed, alloyed steels and cast materials. What benefit does the Tiger‑tec Silver coating provide? Tiger‑tec Silver on the WKP35S grade increases wear resistance and thermal stability, improving edge life and maintaining surface finish consistency during prolonged machining. For which machining tasks is this insert most suitable? The insert is suitable for productive milling tasks such as shoulder milling and ramping where stable chip control and robust edge support are required, thanks to the G55 chipbreaker and 3.2 mm corner radius. How does the parallelogram 75° geometry affect performance? The parallelogram 75° shape provides a stiff cutting edge orientation, improving tool life in interrupted cuts and enabling better chip flow in demanding milling operations. Is this insert compatible with standard toolholders? The BCMT form is a common ISO insert designation; compatibility depends on the holder pocket for BCMT‑type inserts. Confirm holder pocket geometry and clamping style before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory‑new goods from the manufacturer.
BCMT120432R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSP45G grade for a balance of tool life and stable chip formation; the G55 chipbreaker and parallelogram geometry ensure reliable performance across steel, stainless steel and heat‑resistant alloys. Order the insert directly via Metav Werkzeuge or consult the technical team for cutting data and application advice. BCMT120432R-G55 BCMT120432R-G55 WSP45G milling indexable insert – Walter Tools (PVD coated, for milling of steel, stainless steel and superalloys) BCMT120432R-G55 WSP45G is a PVD‑coated milling insert designed for versatile milling duties where edge stability and consistent chip control are required Tiger·tec Gold PVD coating for longer life Versatile P / M / S grade for multiple materials Parallelogram 75° for flexible milling strategies Reliable chip control with G55 chipbreaker Productive milling through advanced coating and grade The combination of Tiger·tec Gold coating and the WSP45G grade delivers a robust, PVD‑based coated carbide system optimised for demanding milling operations. The coating improves thermal resistance and reduces abrasive wear, which contributes to a longer tool life and fewer index changes. The integrated G55 chipbreaker supports stable chip formation, lowering the risk of built‑up edge and enabling consistent material removal rates. This technical composition translates into reduced downtime and improved process efficiency on the shop floor. Geometry engineered for strength and surface quality The insert’s parallelogram 75° shape and 7° relief create a positive cutting geometry suited to a variety of milling strategies, from profiling to shoulder milling. A 3.2 mm corner radius offers a favourable compromise between cutting edge strength and surface finish: it supports higher feed rates and longer edge life, while still producing good part quality on finished surfaces. The insert’s tolerance class M ensures dimensional consistency, which simplifies toolpath planning and promotes repeatable results in serial production. Broad material capability with controlled performance Specified for material groups P / M / S, this insert performs across unalloyed and alloyed steel, stainless steel, and heat‑resistant superalloys including titanium grades. The PVD coating and grade composition are tailored to handle the typical heat development and chip behaviour of these groups, supporting secure chip evacuation and a stable cutting edge under higher thermal loads. For process engineering, the result is predictable cutting behaviour and reliable productivity in mixed‑material production environments. For application‑specific cutting data, or to purchase Walter Tools Tiger·tec Gold inserts such as this BCMT120432R‑G55 WSP45G, contact Metav Werkzeuge for expert guidance and fast procurement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BCMT120432R-G55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT120432R-G55 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Facts Relief angle: 7° Corner radius: 3.2 mm Insert size: 12 Thickness code: 04 Tolerance class: M Special features Coating: Tiger-tec Gold Grade: WSP45G Chipbreaker: G55 Shape: Parallelogram 75° Material group: P / M / S Execution: T Grade designation without sort: BCMT120432R-G55 ISO designation: BCMT120432R-G55 WSP45G Applicable to steel Applicable to stainless steel FAQ Which materials are suitable for this insert? The BCMT120432R‑G55 WSP45G grade is specified for material groups P / M / S, covering unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys including titanium. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating increases thermal resistance and reduces abrasive wear on the cutting edge, extending service life and supporting consistent performance during continuous milling operations. How does the parallelogram 75° shape influence machining strategy? A parallelogram 75° geometry enables versatile entry angles and flexible tool orientation, making the insert suitable for a range of milling tasks such as face milling, shoulder milling and light profiling. What effect does the 3.2 mm corner radius have on results? A 3.2 mm corner radius enhances edge strength and allows higher feed rates with improved durability, while still maintaining a satisfactory surface finish on the machined component. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new merchandise from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
BCMT120440L-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WKP35G grade and the parallelogram 75° geometry for reliable machining of steel and cast iron; order the insert directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. BCMT120440L-G55 WKP35G milling indexable insert — Tiger·tec Gold for steel and cast iron | Walter Tools The BCMT120440L-G55 WKP35G is a parallelogram 75° milling insert designed for productive roughing and finishing in steel and cast-iron applications. Tiger·tec Gold coated WKP35G grade Optimised for steel and cast iron Parallelogram 75° geometry 7° clearance with 4 mm corner radius Improved process efficiency through advanced coating and grade The combination of the Tiger·tec Gold coating and the WKP35G carbide composition delivers consistent cutting performance under the thermal and mechanical stresses of steel and cast-iron machining. The coated carbide provides wear resistance and stable edge retention, which reduces unplanned tool changes and increases net cutting time. The integrated G55 chipbreaker promotes controlled chip formation across a range of feed rates, helping to avoid built-up edge and maintain a predictable surface finish. For operations that prioritise cycle-time reduction, the insert’s coating chemistry and geometry support higher cutting parameters without compromising tool life. Geometry that stabilises cutting and improves surface quality The parallelogram 75° form and a 7° clearance angle create a stable seating and controlled cutter engagement, which improves vibration damping in interrupted cuts. The 4 mm corner radius balances edge strength and the ability to achieve a robust surface finish; larger radii increase edge life, while the chosen radius supports general-purpose milling. The insert is manufactured to tolerance class M, ensuring repeatable seating and indexing in standard cutters. These geometric attributes translate into predictable tool behaviour, reduced rework and a steadier production output. Clear application guidance for reliable integration The grade is optimised for the ISO groups P (steel) and K (cast iron). That means the insert is tuned for the typical heat and chip characteristics of these materials: effective heat management for steels and abrasive resistance for cast iron. Operators can therefore expect consistent performance in mixed batches where both material groups occur. When integrating into an existing toolset, consider the cutter body, clamping method and recommended cutting data from the tool holder manufacturer; the insert’s coated carbide and chipbreaker combination give a wide process window for safe parameter increases. Lower running costs through stable chip control and wear resistance A durable edge and controlled chips contribute directly to operational economy: fewer stoppages for edge changes, lower regrind frequency and improved overall throughput. The Tiger·tec Gold technology promotes even wear distribution, while the G55 chipbreaker helps avoid long, stringy chips and associated surface damage. Over time this improves component consistency and reduces scrap rates. Backed by the brand reputation for engineered performance, the insert supports process reliability and repeatable results in production environments. Contact Metav Werkzeuge for tailored cutting-data advice and to procure genuine Walter Tools Tiger·tec Gold inserts via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BCMT120440L-G55-WKP35G-WALTER Designation: BCMT120440L-G55 WKP35G Series: Tiger·tec Gold Grade: WKP35G Material groups: P / K Facts Plate size: 12 Plate thickness: 04 Clearance angle: 7° Corner radius: 4 Plate form: Parallelogram 75° Tolerance class: M Special features Coating technology: Tiger·tec Gold Chipbreaker: G55 Suitable for: Steel (P) and cast iron (K) Execution: T Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The BCMT120440L-G55 WKP35G insert is designed for machining steel (P) and cast iron (K), where the Tiger·tec Gold coating and the WKP35G grade provide wear resistance and stable chip control. How does the G55 chipbreaker help in production? The G55 chipbreaker on this milling insert promotes controlled chip formation, which reduces the risk of long chips, improves chip evacuation and supports reliable surface quality during milling. Can this insert be used for both roughing and finishing? Yes, the combination of the parallelogram 75° geometry and a 4 mm corner radius offers a balance of edge strength and finish capability, making the insert suitable for productive roughing and stable finishing operations. What does the Tiger·tec Gold coating deliver? The Tiger·tec Gold coating enhances thermal resistance and edge life, supporting higher cutting parameters and longer tool life compared with uncoated grades in similar applications. What tolerance and seating accuracy can be expected? The insert is produced to tolerance class M, which ensures consistent seating and repeatable performance in standard cutter bodies designed for this insert type. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected brand names and trademarks are the property of their respective owners. Mention of brand names such as Walter Tools is for informational purposes only and does not imply any affiliation between our company and the trademark owners. The offered item is an original, factory-new product from the stated manufacturer.
BCMT120440L-G55 WSP45G Tiger-tec Gold Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the versatile P/M/S material suitability for a cost-effective, high‑performance milling cycle; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. BCMT120440L-G55 WSP45G Fräswendeschneidplatte – Tiger·tec Gold, Parallelogram 75°, Walter Tools BCMT120440L-G55 WSP45G is an indexable milling insert designed for demanding milling tasks in steel, stainless steel and heat‑resistant superalloys Tiger·tec Gold PVD coating Suitable for steel, rostfreier Stahl and superalloys Parallelogram 75° insert geometry Chipbreaker G55 for stable chips Improved productivity through Tiger·tec Gold coating The PVD Tiger·tec Gold technology and the WSP45G grade combine wear resistance with fracture toughness to deliver longer tool life during interrupted or continuous milling. This coating strategy reduces flank wear and supports a stable cutting edge under the thermal and mechanical loads typical of machining P/M/S materials. For production environments seeking consistent cycle times, the coated carbide grade provides measurable advantages in tool change intervals and process stability without complex parameter changes. Geometry that secures chip control and surface quality The Parallelogram 75° form and chipbreaker G55 create a controlled cutting action that eases chip evacuation and supports reproducible surface finishes. A free angle of 7° and a defined corner radius of 4 enhance edge strength, reducing the risk of premature chipping while maintaining good contact conditions on the workpiece. These geometric attributes mean fewer interruptions for tool inspection and less rework, which contributes to more predictable throughput and higher first‑pass yield. Practical deployment and reliable repeatability With a nominal plate size of 12 and a plate thickness of 04, the insert fits into standard clamping systems for medium‑to‑heavy milling. The tolerance class M signals consistent dimensional accuracy, supporting repeatable seating and concentricity in multi‑insert cutters. This indexable solution is particularly suited to production runs where material mixes include unalloyed and alloyed steels, rostfreier Stahl and temperature‑resistant alloys; the combination of geometry and grade enables secure chip formation and steady cutting forces for process engineers aiming to optimise feed and speed. For precision milling with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge to discuss application parameters and availability; Metav Werkzeuge can provide tailored recommendations and supply the BCMT120440L-G55 WSP45G for immediate use. Technical Data Article number: BCMT120440L-G55-WSP45G-WALTER Label: Fräswendeschneidplatte BCMT120440L-G55 WSP45G Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Free angle: 7° Corner radius: 4 Plate form: Parallelogram 75° Plate size: 12 Plate thickness: 04 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WSP45G Material applicability: P / M / S Chipbreaker: G55 Execution: T ISO designation: BCMT120440L-G55 WSP45G FAQ What materials are suitable for this insert? The BCMT120440L-G55 WSP45G insert is designed for machining steel (P), rostfreier Stahl (M) and heat‑resistant superalloys/titanium (S) using the Tiger·tec Gold grade. How does the Tiger·tec Gold coating help in production? Tiger·tec Gold on the WSP45G grade improves wear resistance and edge stability, which prolongs tool life and supports consistent cycle times for the BCMT120440L-G55 WSP45G insert. Which cutter geometries work best with this insert form? The Parallelogram 75° form is ideal for face and shoulder milling applications where controlled cutting direction and chip flow are required; it pairs well with stable cutter bodies and verified insert clamping systems. Does the tolerance class affect assembly accuracy? Yes, the tolerance class M ensures dimensional reliability and repeatable seating of the insert, which supports concentricity and consistent cutting performance across multi‑insert assemblies. Is chipbreaker G55 suitable for interrupted cuts? Chipbreaker G55 is engineered for secure chip formation and evacuation, making it a practical choice for a range of interrupted and continuous milling operations with mixed materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, factory‑new goods of the manufacturer.
BCMT120440R-G55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability and optimised chip control to keep machining cycles stable and costs predictable; order directly via Metav Werkzeuge or contact our consultants for application advice. BCMT120440R-G55 WKP35G milling insert (WKP35G) by Walter Tools — Tiger·tec Gold, for steel & cast iron machining The BCMT120440R-G55 WKP35G is a parallelogram 75° milling insert engineered for productive face and shoulder milling of steel and cast iron, bringing robust wear resistance and reliable chip formation to series production. Tiger·tec Gold coating for long life Suitable for steel and cast iron machining 7° clearance, 4 mm corner radius Consistent productivity through advanced coating and grade The insert’s Tiger·tec Gold technology and the WKP35G grade combine to provide enhanced wear resistance and thermal stability during continuous milling. As a coated carbide solution designed for groups P and K, this specification targets the common challenges of machining steel and cast iron — specifically the typical heat generation and abrasive wear. The result is a predictable tool life and reduced downtime for tool change cycles, which supports efficient production planning and stable output. Geometry that improves surface finish and tool life The parallelogram 75° shape with a 7° clearance (relief angle) and 4 mm corner radius delivers a balance between strength and cutting edge engagement. The relief angle reduces rubbing on the flank, lowering heat input into the workpiece, while the larger corner radius increases edge robustness for shoulder milling. The integrated G55 chipbreaker promotes short, controlled chips in interrupted or continuous cuts, leading to improved surface quality and fewer built-up-edge issues on machined surfaces. Practical benefits for shop-floor implementation Tolerance class M supports reproducible seating and indexation in standard milling holders, enabling fast insert changes and consistent cutting geometry across batches. The insert’s designation and profile make it suitable for a wide range of machining tasks where process security and repeatability matter most. For customers seeking technical clarification or cutting-parameter recommendations, Metav Werkzeuge provides application support and can advise on optimised feeds and speeds for the intended material group. Contact Metav Werkzeuge for application support on Walter Tools Tiger·tec Gold inserts and to discuss the best grade and chipformer for specific operations — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: BCMT120440R-G55-WKP35G-WALTER Designation: BCMT120440R-G55 WKP35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Plate size: 12 Thickness: 04 Clearance angle: 7° Corner radius: 4 Tolerance class: M Special features Series: Tiger·tec Gold Grade: WKP35G Material compatibility: P / K Shape: Parallelogramm 75° Chipbreaker: G55 Execution: T FAQ What materials is this insert suited for? The BCMT120440R-G55 WKP35G is specified for machining steel and cast iron (material groups P and K) and is optimised for typical chip formation and heat conditions in those materials. How does the Tiger·tec Gold technology help in production? Tiger·tec Gold provides higher thermal stability and wear resistance, extending the effective life of the WKP35G grade under continuous milling conditions and supporting more predictable tool-change intervals. Which chipshape can be expected with the G55 chipbreaker? The G55 chipbreaker is designed to produce short, controlled chips suitable for face and shoulder milling, reducing the risk of chip entanglement and improving surface finish consistency. Is the geometry suitable for shoulder milling? Yes — the parallelogram 75° form combined with a 4 mm corner radius offers good edge strength and contact conditions for shoulder and face milling operations. What does tolerance class M indicate for workshop practice? Tolerance class M denotes a medium tolerance for seat and indexation dimensions, aiding consistent repeatability when mounting inserts in compatible milling cutters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Walter Tools is a registered trademark of its respective owner. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory-new goods of the manufacturer.
BCMT120440R-G55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a dedicated G55 chipbreaker and robust geometry for consistent metal removal and extended tool life; request product details or place an order via Metav Werkzeuge if required. BCMT120440R-G55 WKP35S milling indexable insert — Tiger·tec Silver for steel and cast iron by Walter Tools The BCMT120440R-G55 WKP35S is a coated carbide milling insert engineered for productive face and shoulder milling in steel and cast iron, combining a durable coating with geometry designed for stable chip control and repeatable surface quality. Tiger·tec Silver coating enhances wear resistance Suitable for steel (P) and cast iron (K) machining Parallelogram 75° geometry for positive cutting engagement 7° clearance angle and corner radius 4 ensure edge stability Consistent cutting performance through advanced coating The combination of Tiger·tec Silver technology and the WKP35S grade delivers reliable resistance to abrasive and adhesive wear, improving edge retention during extended runs. This coated carbide formulation is optimised for the thermal and mechanical demands of machining Steel and Cast iron, reducing flank wear and maintaining dimensional accuracy. In practice, the result is fewer tool changes and steadier production cycles, which supports predictable planning on the shop floor. Geometry that improves productivity and surface finish With a parallelogram 75° seating and a G55 chipbreaker, the insert promotes controlled chip formation and evacuation, lowering the risk of built-up edge and interruption. The moderate 7° clearance combined with a corner radius 4 provides a balance between edge strength and surface quality, enabling productive machining at higher feed rates while preserving component finish. For applications requiring repeatable quality, this geometry reduces rework and cycle variability. Size and tolerance designed for stable clamping and repeatability The insert designation and form reflect a standardised format that integrates smoothly with common milling toolholders. The listed dimensions and tolerance class M make the insert suitable for fixtures requiring consistent seating accuracy. The plate size and thickness values correspond to established toolholder pockets, so changeovers remain straightforward and down-time is minimised. This predictability supports lean manufacturing workflows. Targeted for versatile industrial applications Designed for general-purpose to moderately demanding tasks, this grade is a practical choice where a single insert must cover a range of steel and cast-iron components. Its WKP35S composition is tailored for broad material coverage, allowing fewer tool variants in inventory. For batch production or small-series work where setup time and stock complexity impact efficiency, the insert’s versatility translates into tangible operational benefits. Process reliability and economic benefits By offering improved wear resistance and consistent edge behaviour, the insert helps to extend tool life and reduce unscheduled replacements. The combination of coated carbide technology and a dedicated chipbreaker lowers the total cost per part through longer effective cutting lengths and reduced scrap rates. For production environments prioritising throughput and repeatability, this solution contributes directly to process stability and cost control. Integration and handling in daily operation The insert’s familiar geometry and designation facilitate rapid identification and replacement within existing tool systems. Marked and packaged for clarity, the component supports efficient inventory management and quick decision-making on the shop floor. Where process optimisation is sought, adopting a well-documented insert such as this reduces variability and simplifies operator training. Contact Metav Werkzeuge for specification support and to secure the Walter Tools Tiger·tec Silver BCMT120440R-G55 WKP35S insert for the intended application; technical advisors are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: BCMT120440R-G55-WKP35S-WALTER Designation: BCMT120440R-G55 Full designation: BCMT120440R-G55 WKP35S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP35S Material group: P / K Chipbreaker: G55 Facts Clearance angle: 7° Insert form: Parallelogram 75° Corner radius: 4 Plate size: 12 Plate thickness: 04 Tolerance class: M Execution: T Special features Coated carbide (Tiger·tec Silver) Suitable for Steel (P) Suitable for Cast iron (K) Stable chip formation and wide material coverage Designed for productive milling applications FAQ What materials are recommended for this insert? The insert is designed for Steel (P) and Cast iron (K) machining; the WKP35S grade and Tiger·tec Silver coating provide appropriate wear resistance for those groups. How does the G55 chipbreaker affect machining? The G55 chipbreaker promotes predictable chip shapes and evacuation, improving surface quality and reducing the likelihood of chip entanglement during milling. Is this insert suitable for high-speed milling? The combination of coated carbide and the insert geometry offers good resistance under elevated cutting speeds typical for steel and cast-iron operations; actual parameters depend on toolholder and machine capabilities. What is the significance of the parallelogram 75° form? The parallelogram 75° seating provides a positive cutting engagement that can reduce cutting forces in specific operations, aiding stable milling and reproducible part quality. Can the insert be used in existing toolholders that accept BCMT-style inserts? Yes, the designation aligns with BCMT-style pockets; the tolerance class M supports consistent seating, but compatibility should be verified with the specific holder. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
BCMT120440R-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a highly wear-resistant PVD grade and a parallelogram 75° form that delivers consistent chip control across Stahl, rostfreier Stahl and heat‑resistant alloys; the result is stable machining with longer edge life and predictable process windows. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific advice. BCMT120440R-G55 WSP45G indexable milling insert — Tiger·tec Gold, for milling applications — Walter Tools BCMT120440R-G55 WSP45G is a versatile indexable milling insert designed for demanding milling tasks in a wide material range, offering a balanced combination of edge stability and wear resistance. Tiger·tec Gold PVD for extended tool life Universal WSP45G grade for P / M / S Parallelogram 75° form for diverse milling tasks Boosted productivity with a material-optimised grade The insert combines the Tiger·tec Gold coating with the WSP45G grade to provide enhanced resistance to flank and crater wear, which directly translates into longer tool life and fewer indexings. Designed for the machining of Stahl, rostfreier Stahl and heat‑resistant superalloys, the geometry and coating support stable chip formation under the thermal and mechanical stresses typical of heavy milling. This results in more predictable cycle times and improved process efficiency on both high‑volume runs and demanding single‑part jobs. Consistent edge performance and process reliability A parallelogram 75° shape with a measured 7° free angle and a defined corner radius ensures reliable engagement and secure cutting edge support during interrupted cuts. The G55 chipbreaker works in tandem with the grade to control chip form and evacuate swarf effectively, reducing the risk of built‑up edge and thermal loading. These technical choices mean fewer quality rejects and more consistent surface finishes, supporting tighter tolerances with less operator intervention. Practical handling, adaptability and recommended use The insert’s nominal size 12 and thickness 04 accommodate common milling toolholders while keeping inventory simple. The grade’s balanced PVD technology makes it especially suited to mixed‑shop environments where components of Stahl, rostfreier Stahl and high‑temperature alloys are machined in sequence. For best results, pair the insert with stable toolholding, appropriate cutting data for the material group (P / M / S) and a coolant strategy aligned to workpiece thermal sensitivity; the combination provides both performance and predictable tool life. For milling operations that demand versatile, long‑lasting performance, request the BCMT120440R-G55 WSP45G insert from Metav Werkzeuge or speak to their technical team for tailored cutting data and holder recommendations. Technical data Article number: BCMT120440R-G55-WSP45G-WALTER Designation: BCMT120440R-G55 WSP45G Product: indexable milling insert Facts Size: 12 Thickness: 04 Free angle: 7° Corner radius: 4 Special features Grade: WSP45G (Tiger·tec Gold) Suitable materials: P / M / S Shape: Parallelogram 75° Chipbreaker: G55 Tolerance class: M Execution: T FAQ What materials is this insert suitable for? The BCMT120440R-G55 WSP45G insert is made for machining materials grouped as P (Stahl), M (rostfreier Stahl) and S (heat‑resistant superalloys and Titan), as indicated by the WSP45G grade. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold PVD coating on this Walter Tools insert improves wear resistance and heat management, allowing longer tool life and steadier performance in continuous milling. Which chipbreaker and geometry are used for heavy milling? This insert uses the G55 chipbreaker and a parallelogram 75° form to provide positive chip control and secure cutting edge support under interrupted and heavy milling conditions. Is this insert compatible with standard indexable milling holders? Yes, the BCMT120440R‑G55 series follows common insert dimensions (size 12, thickness 04) and suits holders designed for parallelogram 75° indexable inserts; verify holder compatibility before mounting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the brands stated. The offered item is original and factory‑new from the manufacturer.
BCMT160508L-G55 WKP35G Wendeplatten - Walter Tools
The high-performance combination of the Tiger·tec Gold coating and the WKP35G grade delivers durable cutting edges and stable chip formation for reliable milling of steel and cast iron; the G55 chipbreaker and parallelogram geometry ensure consistent chip control and process security. Order the insert directly via Metav Werkzeuge or consult the Metav team for application support. BCMT160508L-G55 WKP35G – Milling insert with Tiger·tec Gold coating for steel and cast iron | Walter Tools The BCMT160508L-G55 WKP35G is a precision milling insert designed for productive machining of steel (P) and cast iron (K) in general milling operations. Tiger·tec Gold coating for extended tool life WKP35G grade optimised for steel and cast iron G55 chipbreaker for reliable chip control Parallelogram 75° geometry for secure seating Durable edge life through advanced coating and substrate The combination of the Tiger·tec Gold coating and the WKP35G substrate promotes high wear resistance and thermal stability during heavy milling cycles. This coating technology reduces flank wear and preserves the cutting edge, which translates into longer tool life and fewer index changes. For workshops focusing on steady production, the coated carbide composition supports repeatable performance and contributes to predictable tool-change intervals, improving overall machining efficiency. Improved process reliability with defined chip control The dedicated G55 chipbreaker and parallelogram 75° geometry work together to produce controlled chip segmentation and efficient evacuation. A defined corner radius of 0.8 mm and a relief angle of 7° balance strength and edge sharpness, helping to reduce vibration and enhance surface finish. These geometric choices are especially beneficial in interrupted cuts and mixed-material batches where consistent chip formation reduces the risk of tool damage and workpiece rework. Application range and integration into production Designed for the ISO material groups P (steel) and K (cast iron), the insert is suited to a broad range of general milling tasks where a balance of toughness and abrasion resistance is required. The tolerance class M and the standard insert form allow straightforward integration into common toolholders and milling bodies, supporting fast replacement and minimal setup time. The product is presented as an indexable milling insert that prioritises process security and productive machining for batch and continuous operations. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools inserts such as the BCMT160508L-G55 WKP35G; email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and quotations. Technical data SKU: BCMT160508L-G55-WKP35G-WALTER Designation: BCMT160508L-G55 WKP35G Type: Milling insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Numerical data Relief angle: 7° Corner radius: 0.8 mm Size code: 16 Thickness code: 05 Special features Coating: Tiger·tec Gold Chipbreaker: G55 Applicable materials: Steel (P), Cast iron (K) Tolerance class: M Plate form: Parallelogram 75° Execution: T Substrate/material designation: P / K FAQ What materials is this insert suitable for? The BCMT160508L-G55 WKP35G is specified for ISO groups P and K, meaning it is suitable for a range of steels and cast irons; the WKP35G grade ensures balanced performance across these materials. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating reduces abrasive wear and thermal softening, extending the cutting edge life of the Walter Tools insert and increasing process stability in serial milling applications. Which chipbreaker is fitted and what is its advantage? This insert features the G55 chipbreaker, which promotes controlled chip formation and evacuation, supporting safer interrupted cuts and improved surface quality. Is the insert compatible with standard toolholders? The parallelogram 75° form and common BCMT designation enable compatibility with standard milling toolholders designed for this insert geometry. What does the tolerance class M indicate for users? Tolerance class M denotes the manufacturing tolerance applied to the insert geometry, ensuring consistent fit and repeatable performance when mounted in appropriately rated toolholders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
BCMT160508L-G55 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold performance, a WSP45G PVD-coated grade and precise geometry for consistent productivity and extended tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. BCMT160508L-G55 WSP45G — Indexable milling insert (Parallelogram 75°, Tiger‑tec Gold) by Walter Tools The BCMT160508L-G55 WSP45G is an indexable milling insert designed for productive machining of Stahl, rostfreier Stahl and heat‑resistant alloys in general milling applications. Tiger‑tec Gold PVD-coated grade WSP45G Suitable for Stahl, rostfreier Stahl and superalloys Parallelogram 75° form for stable cutting 7° clearance with 0.8 mm corner radius Proven wear resistance for higher uptime The Tiger‑tec Gold series offers a PVD-coated carbide substrate engineered for long tool life and stable cutting behaviour. The WSP45G grade combines toughness with surface hardness to resist abrasive wear and built‑up edge formation during interrupted cuts. This results in fewer index changes and more consistent production cycles, supporting higher machine utilisation and predictable down‑time planning. The insert’s classification and coating technology are optimised for typical milling heat loads and chip formation when cutting Stahl and rostfreier Stahl, delivering measurable gains in process reliability. Geometry that improves chip control and surface quality A parallelogram 75° plate form with a 7° clearance angle and 0.8 mm corner radius balances cutting force distribution and edge strength. The oblique engagement provided by the 75° form reduces radial loads while improving finish on the workpiece; the moderate corner radius supports finishing passes without sacrificing edge durability. The integrated G55 chipbreaker is tuned for consistent chip segmentation in a wide range of feeds, reducing recutting and improving surface integrity. Where finish is critical, this geometry helps to keep vibration low and tolerances stable. Broad material capability for versatile shop use This insert is specified for ISO groups P / M / S, meaning it is suitable for conventional steel, rostfrei steels and high‑temperature alloys such as titanium and nickel‑based superalloys. The WSP45G grade is formulated to tolerate the thermal and mechanical stresses typical of these materials, offering a compromise between toughness and wear resistance for mixed‑material production runs. Tolerance class M indicates manufacturing precision suitable for most milling fixtures and holders, allowing straightforward integration into existing tool families and clamping systems for reliable repeatability. Discuss specific application requirements with Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Gold WSP45G inserts — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: BCMT160508L-G55-WSP45G-WALTER Article designation: BCMT160508L-G55 ISO designation: BCMT160508L-G55 WSP45G Series: Tiger‑tec Gold Grade: WSP45G Manufacturer: Walter Tools Facts Clearance angle: 7° Corner radius: 0.8 mm Plate form: Parallelogram 75° Plate size: 16 Thickness code: 05 Tolerance class: M Special features PVD-coated carbide (beschichtetes Hartmetall) Chipbreaker: G55 Material groups: P / M / S (Stahl, rostfreier Stahl, superalloys/titan) Execution: T Robust edge stability and broad application range Series focus: versatile milling applications FAQ What materials is this insert suitable for? The BCMT160508L-G55 WSP45G insert is designed for machining Stahl, rostfreier Stahl and heat‑resistant superalloys (ISO groups P, M, S), leveraging the Tiger‑tec Gold coating for stable chip formation across these materials. How does the parallelogram 75° form affect cutting? A parallelogram 75° form on the BCMT160508L-G55 reduces radial cutting forces and improves surface finish; combined with the G55 chipbreaker it enhances chip control and edge life in milling operations. What does the WSP45G grade offer compared with standard grades? WSP45G is a Walter Tools PVD grade that emphasises a balance of toughness and wear resistance, suitable for mixed applications where both edge stability and abrasion resistance are required. Is the corner radius appropriate for finishing passes? The 0.8 mm corner radius provides a compromise between edge strength and finish quality, allowing light finishing passes while maintaining resistance to edge chipping in interrupted cuts. Which series and manufacturer supply this insert? This insert belongs to the Tiger‑tec Gold series by Walter Tools and is supplied as the ISO designation BCMT160508L-G55 WSP45G. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
Why indexable inserts are indispensable in modern machining
Indexable inserts, also known as cutting inserts or indexable cutting inserts, are standardised, replaceable cutting elements that mount on tool holders such as turning bits, milling cutters or drills. Made from wear-resistant materials like carbide, cermet, ceramic or other superhard grades, they carry the actual cutting edge and allow a worn corner to be rotated or flipped instead of replacing or regrinding the entire tool body.
How these inserts work and when to choose them
In everyday workshop and production settings, indexable inserts perform the direct material removal on the workpiece. Standard inserts for tool systems without internal coolant typically feature closed faces or a single central fixing hole, with heat evacuation handled by external machine nozzles. Inserts designed for systems with internal coolant are engineered to support coolant flow: they include calculated chipbreaker geometries that guide an internal coolant jet under the chip or, in specialised designs, contain sintered microchannels to direct coolant right to the cutting edge. Such coolant-compatible inserts are essential for machining heat-resistant alloys, heavy cutting operations and deep internal machining, where thermal load and chip control are critical.
Tangible benefits for production and workshop efficiency
Choosing the right indexable inserts delivers measurable operational advantages:
- Reduced downtime: faster changeover because a worn insert is simply indexed rather than the whole tool being replaced.
- Extended cutting-edge life: targeted coolant application and optimised chipbreaker design lower thermal stress and improve tool life.
- Consistent part quality: predictable cutting-edge geometry from standardised inserts maintains tolerances across batches.
- Versatility: availability in carbide, cermet, ceramic and superhard grades permits selection according to workpiece material and cutting conditions.
- Lower tooling costs over time: fewer full-tool replacements and less regrinding required.
Metav as a dependable source for inserts and tooling systems
Metav combines decades of precision expertise with a wide-ranging supply chain, positioning itself as a practical partner for industry, craft and trade. From Emmerich on the Rhine, Metav operates as a quality filter for the European market, offering more than 250,000 products and serving over 48,000 customers. For procurement teams aiming to reduce supplier count while retaining technical reliability, Metav’s assortment of indexable inserts and compatible tool holders provides a central, trustworthy solution.
Quick summary
Indexable inserts (cutting inserts or indexable cutting inserts) enable economical, repeatable material removal by allowing worn cutting edges to be indexed or replaced quickly; coolant-adapted designs further reduce thermal load and enhance chip control for demanding applications.
FAQ
What materials are indexable inserts available in?
Indexable inserts are available in wear-resistant grades such as carbide, cermet, ceramic and other superhard materials, selected according to the workpiece material and cutting conditions.
When should I choose inserts with internal coolant support?
Choose inserts designed for internal coolant when machining heat-resistant alloys, performing heavy cuts or working in deep internal features, because the coolant reduces thermal load at the cutting edge and actively improves chip breakage.
How do chipbreaker geometries affect performance?
Chipbreaker geometries on indexable inserts guide the chip flow and, when matched to an internal coolant jet, direct the coolant under the chip to control temperature and facilitate reliable chip formation, which extends edge life and stabilises machining.
Can standard inserts be used with external coolant only?
Yes; standard inserts for tool systems without internal coolant typically have closed faces or a central fixing hole and rely on external machine nozzles for heat evacuation, which is sufficient for many routine, accessible cuts.
Why source inserts through Metav?
Metav supplies a broad range of indexable inserts and tooling, backed by decades of expertise and a comprehensive European stock, making it a practical choice for consistent quality and dependable delivery.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com