Durable industrial scales for precise process control
Industrial scales and platform weighing systems deliver reliable weight determination for production, logistics and quality assurance, combining robust construction with high measurement accuracy to withstand harsh environments and heavy loads. Designed for use with steel or stainless steel load cells and rugged weighing bridges, these systems improve throughput by enabling fast pallet and platform weighing, seamless integration via USB, Ethernet or RS‑232 and support for ERP and PLC connectivity. Ideal for inventory control, incoming goods inspection and process recipes, the range includes compact table scales, flat floor scales and pallet scales as well as crane and hanging scales to cover diverse material handling needs. Key benefits are long service life, consistent measurement performance and simplified operation through modern indicators and intuitive interfaces.
16kg Precision Counting Scale 0.05g Readability, 340×240mm Stainless Steel Pan, IoT-Ready, KUP/KCP Interface - KERN
Take advantage of lab-grade accuracy and an intuitive, graphic interface to speed up inventory and counting tasks while keeping error rates low; integrate the system into production networks via the KUP interface for efficient data exchange. Order directly via Metav Werkzeuge or consult our specialists for application support. CKE.16K0.05 counting scale — 16 kg capacity, 0.05 g readability The CKE.16K0.05 is a self-explanatory industrial counting scale designed for inventory, production control and quality assurance in industrial environments. Lab-grade accuracy, 0.05 g readability 16 kg capacity with 340×240 mm pan Intuitive graphic interface, no training required KUP port: RS‑232/USB/Bluetooth/WLAN/Ethernet Two modes: counting and weighing Precise counting that speeds up inventory and reduces errors The unit delivers lab-grade accuracy with a readability of 0.05 g and a counting resolution of up to 320,000 points, which translates into dependable part counts even for small components. Built around a strain gauge weighing system, the instrument offers reproducible results (0.05 g) and a linearity of ±0.15 g, so batch and per-piece calculations remain consistent across repeated measurements. For businesses that run periodic stock checks or high-volume picking, the focus on measurement stability reduces time spent on manual verification and lowers the risk of costly counting mistakes. Intuitive workflow and seamless connectivity for modern production Operation is guided by a graphic-supported control panel that leads through four simple steps—tare, set reference quantity, confirm reference, then count—eliminating prolonged training and shortening onboarding. The clear LCD with 25 mm digit height presents counts and weights at a glance. For system integration, the KUP universal port accepts external adapters (RS‑232, USB, Bluetooth, WLAN, Ethernet) and the KCP protocol enables remote querying and control by automation or software systems, allowing straightforward inclusion in MES or inventory-management setups. These features support faster data capture and fewer manual transfers. Robust operation and flexible power options for the workshop Constructed with a stainless steel pan and a plastic housing, the device balances durability with ease of cleaning; the rectangular weighing surface measures 340×240 mm and the housing dimensions are 350×390×120 mm, making it compact on a workbench. The scale accepts mains supplies from 110–240 V AC with country adapters included (CH, EURO, UK, US) and can operate on 6×1.5 V AAA batteries for up to 80 h or with an optional internal rechargeable battery (10 h charge time). The operating range from 10 °C to 40 °C and 80% maximum relative humidity suits typical industrial environments where uptime and portability are required. Designed for varied industrial applications with practical extras Functionality covers both high-precision counting (smallest piece weight in laboratory mode 50 mg) and standard counting (smallest piece weight 500 mg), while a toggle allows direct switching between counting and weighing modes. The delivery includes a protective workhood to reduce air disturbance and contamination during sensitive measurements. These attributes make the instrument suitable for serial production, quality control, inventory tasks and commission picking, where repeatable measurements and minimal operator training are priorities. Contact Metav Werkzeuge to discuss the KERN CKE.16K0.05 for specific production workflows or request tailored integration advice from our specialists in Emmerich — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: TCKE SKU: CKE.16K0.05 GTIN: 4045761230132 Manufacturer: KERN Country of origin: DE Facts Weighing range: 16000 g Readability: 0.05 g Reproducibility: 0.05 g Linearity: ± 0.15 g Smallest piece weight (lab): 50 mg Smallest piece weight (normal): 500 mg Display digit height: 25 mm Display type: LCD Weight: 6.5 kg Operating temperature: 10 °C–40 °C Max ambient humidity: 80 % Special features Housing: plastic; weighing plate: stainless steel Weighing system: strain gauge Weighing plate dimensions: 340×240 mm Housing dimensions (without removable parts): 350×390×120 mm Power supply: 110 V–240 V AC; adapters included (CH, EURO, UK, US) Battery: 6×1.5 V AAA; battery operating time: 80 h Optional internal rechargeable battery; charge time: 10 h KUP universal port for external adapters KCP communication protocol for remote querying and control Protection workhood included Tarra function and automatic reference optimisation FAQ How accurate is the counting function for very small parts? The KERN CKE.16K0.05 achieves lab-grade readability of 0.05 g and, in laboratory counting mode, can handle smallest piece weights down to 50 mg, making it suitable for fine-component counting. Can the scale be integrated into an existing inventory system? Yes — the unit supports the KUP universal port and KCP protocol, allowing connection via RS‑232, USB, Bluetooth, WLAN or Ethernet for data exchange and remote control by automation or software. Is the device suitable for mobile use on the shop floor? The instrument runs on 6×1.5 V AAA batteries for up to 80 h or an optional internal rechargeable battery (10 h charge), so it can be used away from mains supply where required. What environments and materials is the scale designed for? With a stainless steel weighing pan, plastic housing and an operating range of 10 °C–40 °C at up to 80% humidity, the scale is intended for industrial conditions including production monitoring, quality control and warehouse counting. Does the package include accessories for reducing measurement disturbance? A protective workhood is included to limit air currents and contamination during sensitive weighing and counting operations. Manufacturer: KERN, Germany — Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930
16kg Precision Counting Scale 0.1g Readability, 340×240mm Stainless Steel Pan, LCD, KERN - KERN
Take advantage of precise counting, intuitive graphic operation and versatile connectivity for faster inventories and reliable quality control; order the KERN CKE 16K0.1 directly via Metav Werkzeuge or ask our consultants if needed. KERN CKE 16K0.1 — Industrial counting scale with 16 kg range and 0.1 g readability The KERN CKE 16K0.1 is a self-explanatory counting scale designed for industrial inventory, batch counting and production control in manufacturing environments Lab accuracy with 0.1 g readability Counting resolution up to 160,000 points KUP port for RS-232/USB/Bluetooth/WLAN Stainless-steel pan and robust plastic housing Faster, mistake‑free inventory counting that saves time The graphic-supported interface and four-step visual workflow make repetitive counting straightforward and reduce training time. With lab accuracy and an impressive counting resolution 160,000, average part weights are refined automatically by the automatic reference optimisation, so batch counts become steadily more reliable as the process runs. The integrated TARE function and the ability to switch between counting and weighing modes allow clear, verifiable results during stocktaking and parts picking, supporting consistent traceability and fewer manual corrections. Seamless data exchange and modern connectivity for process integration Equipped with the versatile KUP connection port, the instrument accepts external adapters for RS‑232, USB, Bluetooth, WLAN or Ethernet without installation effort. Remote queries and control are possible via the KCP communication protocol, enabling direct interrogation from PLCs or PCs and straightforward integration into MES and inventory systems. This IoT‑ready connectivity turns measured values into actionable data, accelerating reporting and reducing manual transfer errors in digital production environments. Industrial design and power flexibility for continuous operation Built with a stainless‑steel pan on a durable plastic housing and a precision strain‑gauge load cell, the unit withstands everyday workshop conditions while delivering repeatable results (reproducibility 0.1 g). The rectangular weighing plate offers practical handling space and the bright LCD (25 mm digit height) keeps readouts legible in busy settings. Power options include a universal mains adapter (110–240 V AC) with country plugs (CH, EURO, UK, US) and battery operation (6×1.5 V AAA) for temporary, cordless use; typical battery life 80 h supports long counting sessions away from fixed power points. Contact Metav Werkzeuge in Emmerich for tailored advice on the KERN CKE 16K0.1, procurement options and system integration — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CKE.16K0.1 Manufacturer: KERN GTIN: 4045761230125 Country of origin: DE Article code: TCKE Core specifications Weighing range: 16,000 g Readability: 0.1 g (0.0001 kg) Counting resolution: 160,000 points Reproducibility: 0.1 g Smallest piece weight (normal): 1 g Smallest piece weight (lab): 100 mg Display digit height: 25 mm Weighing plate: 340×240 mm Housing dimensions: 350×390×120 mm Net weight: 6.5 kg Operating temperature: 10°C–40°C Max. relative humidity: 80% Battery: 6×1.5 V AAA Battery life: 80 h Mains input: 110 V–240 V AC Battery charge time: 10 h Features & materials Housing: plastic Weighing plate: stainless steel Weighing system: strain‑gauge load cell KUP port for external adapters KCP communication protocol supported Two modes: counting and weighing Protective cover included Power adapters included: CH, EURO, UK, US Compatible with KERN EasyTouch software Tariff code: 84238129 FAQ Which smallest piece weight can be counted reliably? The KERN CKE 16K0.1 counts parts down to 1 g in standard counting mode and down to 100 mg in laboratory mode, depending on part stability and handling. How can the scale be connected to existing systems? Connections are made via the KUP port; compatible adapters allow RS‑232, USB, Bluetooth, WLAN or Ethernet links, and the KCP protocol supports remote queries and control from external devices. What power options and battery performance are available? The unit accepts 110–240 V AC and operates on 6×1.5 V AAA batteries for portable use; typical battery life is around 80 hours with a charge time of 10 hours. What is included on delivery and which accessories are supplied? Delivery includes the protective work cover and country adapters (CH, EURO, UK, US); the scale offers both counting and weighing functions out of the box KERN — Germany | Distributor contact: Metav Werkzeuge, Emmerich | Email: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271
16kg Precision Table Scale 0.05g Readability, Stainless Steel Platform, IoT-Ready KERN
Take advantage of the combination of high-resolution weighing, a robust stainless-steel weighing plate and flexible IoT-ready connectivity for precise, traceable results in production and quality control. Order the KERN FKB 16K0.05 directly via Metav Werkzeuge or consult our specialists for configuration and delivery. KERN FKB 16K0.05 – IoT-Line tabletop scale with 16 kg capacity and high resolution The KERN FKB 16K0.05 is a high-resolution tabletop scale designed for industrial workshops, laboratories and logistics environments where large loads and fine resolution must be combined in a compact unit. KERN IoT-Line with modular KUP port High resolution up to 320,000 points Stainless-steel weighing plate 340×240 mm Compact design with 16 kg capacity Precise results for high-resolution tasks With a readability of 0.05 g and an internal resolution of up to 320,000 points, this tabletop instrument enables the detection of very small weight differences while handling substantial loads up to 16 kg. The strain-gauge load cell provides consistent reproducibility (0.05 g) and a linearity of ±0.25 g, which means measurements remain reliable across the full weighing range. These attributes make the scale suitable for tasks such as material-loss checks, sample analysis and precision counting, where small deviations must be identified and documented. Seamless data transfer and Industry 4.0 compatibility Equipped with the modular KUP interface, the device is IoT-ready and accepts plug‑in adapters for RS-232, USB, Bluetooth, WLAN or Ethernet without opening the housing. Remote query and control are supported via the KERN Communication Protocol, while compatibility with KERN EasyTouch simplifies data capture and evaluation on PCs, tablets and smartphones. The modular approach reduces integration time and minimises manual transcription errors, supporting automated workflows and regulatory traceability in production or laboratory networks. Robust design and practical operation for workshop use The combination of a stainless-steel weighing plate and a durable plastic die‑cast housing yields a stable, easy-to-clean platform that resists daily wear. Level adjustment is fast with the integrated spirit level and levelling feet, and the included protective cover keeps the weighing surface dust-free when not in use. Handy functions such as PRE-TARE for manual container tare and programmable weighing units (e.g. g/m or g/m²) increase operational flexibility. Power is provided via the supplied plug-in mains adaptor (AUS/CH/EU/UK/US), with the option of using 6×1.5 V AA batteries for mobility and an estimated battery life of 80 h; an internal rechargeable battery option is also available with a charge time of approximately 10 h. The overall package is tailored for compact workspaces without compromising accuracy. Contact Metav Werkzeuge for a tailored configuration and reliable delivery of the KERN FKB 16K0.05 from our Emmerich location Technical data SKU: FKB.16K0.05 Article number: TFKB-A GTIN: 4045761215542 Manufacturer: KERN Origin: CN Facts Weighing range: 16,000 g Readability: 0.05 g Reproducibility: 0.05 g Linearity: ±0.25 g Display digit height: 25 mm Platform size: 340×240 mm Housing dimensions: 350×390×120 mm Net weight: 6.5 kg Battery type: 6×1.5 V AA Battery operating time: 80 h Internal battery charge time (optional): 10 h Operating temperature: −10 °C – 40 °C Max. relative humidity: 80 % Special features Stainless-steel weighing plate Strain-gauge load cell Plastic die-cast housing LCD display PRE-TARE function Programmable weighing unit Spirit level and levelling feet Protective cover included KUP modular port for plug-in adapters (RS-232, USB, Bluetooth, WLAN, Ethernet) KERN Communication Protocol (KCP) Extension box KUP-13 for up to three KUP adapters Compatible with KERN EasyTouch software Supplied plug types: AUS; CH; EURO; UK; US FAQ What is the maximum capacity and smallest readable increment? The scale supports a maximum weighing range of 16 kg with a readability of 0.05 g, making it suitable for both heavy items and fine-resolution tasks with KERN precision. Can the device be integrated into an existing network for automatic logging? Yes. The KUP modular port and available adapters allow network integration via USB, WLAN, Ethernet or Bluetooth; the KERN Communication Protocol further supports remote query and control. Is the weighing surface suitable for workshop environments? The stainless-steel weighing plate and die-cast housing provide a robust surface resistant to daily workshop conditions while remaining straightforward to clean and maintain. Does the scale support special units or custom displays? The unit offers programmable weighing units (for example, direct display in g/m or g/m²), enabling tailored readings for specific production or quality-control needs. What power options are available for mobile use? Standard operation uses the supplied plug-in mains adaptor; for mobile applications, the instrument can run on 6×1.5 V AA batteries with an estimated 80 h operating time, and an optional internal rechargeable battery is available. Metav Werkzeuge, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271
20 kg Stainless Steel Platform Scale IP65/IP67, 2 g Readability, Rechargeable Battery, 52 mm LCD - KERN
Take advantage of precise, repeatable weighing through a robust stainless steel construction and industry-grade protection, combined with a clear 52 mm LCD for fast reading and reliable process control. Order the scale directly via Metav Werkzeuge or ask our consultants for application advice and calibration options. KERN SFB 20K2HIP stainless steel platform scale — IP65/IP67, 20 kg range The KERN SFB 20K2HIP is a stainless steel platform scale engineered for industrial production, packaging and hygienic environments where accuracy and washability are essential. Stainless steel platform and housing IP65/IP67 High-visibility 52 mm LCD for clear readings Readability 0.002 kg for precise industrial weighing Rechargeable operation with 12 h charging time Durable protection for continuous production The SFB series combines a stainless steel housing and a fully sealed platform to deliver consistent operation in harsh conditions. With the platform rated IP67 and the indicator at IP65, the scale withstands dust, splashes and temporary immersion on the weighing surface, which reduces downtime for cleaning and prevents corrosion-related faults. The construction and finish translate into lower maintenance requirements and longer service life in demanding production lines. Measurement accuracy that supports quality control Designed for tasks that demand repeatable results, the scale offers 0.002 kg readability together with ±0.002 kg linearity and 0.002 kg reproducibility, ensuring small weight differences are detected and documented. The weighing system uses a strain gauge principle with a silicone-coated stainless-steel load cell to secure stable readings even under frequent cleaning cycles. A 52 mm LCD digit height improves readability across busy workstations, speeding up cycle times and minimising handling errors. Hygienic, compact layout with flexible installation The compact rectangular weighing plate (300×240 mm) and slim footprint make the unit suitable where space is limited while still providing a 20 kg capacity for a wide range of parts. A supplied stand (approx. 200 mm) gives ergonomic visibility for operators; the unit can also operate on rechargeable power (charging time: 12 h) or via a universal plug-in adapter set for AUS, CH, EURO, UK and US. Only one optional interface may be installed at a time, which keeps system integration straightforward and predictable. The combination of stainless surfaces and a sealed load cell makes the model well suited to chemical and hygienic areas where cleaning regimes are frequent. Contact Metav Werkzeuge in Emmerich for tailored advice on the KERN SFB 20K2HIP, calibration options and delivery from our quality centre — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: TSFB-A SKU: SFB.20K2HIP GTIN: 4045761247857 Manufacturer: KERN Country of origin: CN Tariff number: 84238129 Facts Weighing range: 20 kg Readability: 0.002 kg Linearity: ± 0.002 kg Reproducibility: 0.002 kg Platform dimensions: 300×240×105 mm Weighing plate: 300×240 mm Display digit height: 52 mm Net weight: 7.5 kg Operating temperature: -10 °C - 40 °C Max ambient humidity: 95% Power input: 110 V - 230 V AC Charging time: 12 h Special features Material: housing and weighing plate made of stainless steel Platform protection: IP67 Indicator protection: IP65 Weighing system: strain gauge Load cell: silicone-coated stainless-steel load cell Stand included, stand height approx. 200 mm Mains adapters included: AUS; CH; EURO; UK; US Only one optional interface can be installed Suitable for industrial, packaging, chemical and hygienic areas FAQ What environments is this platform scale designed for? The KERN SFB 20K2HIP is built for industrial, packaging, chemical and hygienic areas; the platform is IP67-rated and the display unit is IP65-rated to resist dust and splashes. How precise are the measurements for small parts? Precision is ensured by the 0.002 kg readability and ±0.002 kg linearity of the KERN SFB 20K2HIP, making it suitable for small-part checks and quality control. What practical protection do IP65 and IP67 provide? IP65 for the indicator means protection against dust ingress and low-pressure water jets; IP67 for the platform means it is dust-tight and protected against temporary immersion — both reduce contamination risk during cleaning. Is the scale suitable where space is limited? Yes — the compact weighing plate (300×240 mm) and included stand (approx. 200 mm) offer an ergonomic footprint while maintaining a 20 kg capacity. Can wash-down procedures be used on this scale? The stainless steel surfaces and silicone-coated load cell in the KERN SFB 20K2HIP are chosen to withstand frequent cleaning, supporting hygienic wash-down processes. How are interfaces handled for system integration? The SFB model allows one optional interface to be fitted at a time, providing a clear integration path for existing data-capture systems. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp: +49 170 2837271
200 kg Hanging Scale 0.5 kg Readability, Peak-Hold, Stainless Hook & Carabiner - KERN
Take advantage of precise control weighing with an easy-to-read display and robust safety features for reliable handling and faster workflow; order directly via Metav Werkzeuge or consult our specialists for application advice. KERN HCB 200K500 Hanging Scale — 200 kg capacity, 0.5 kg readability A compact KERN HCB 200K500 hanging scale designed for rapid control weighing across warehouses, workshops and outdoor tasks 200 kg capacity, 0.5 kg readability TÜV-certified to EN 13155 & EN 61010-1 Hold and Peak-Hold functions for clear reading Stainless steel carabiner and hook with safety lock Faster decisions through clear, measurable results The lightweight hanging scale delivers 200 kg capacity with 0.5 kg readability, enabling quick checks of incoming and outgoing goods without overcomplication. The strain‑gauge weighing system and a measurement frequency of 5 Hz ensure stable values even when loads move slightly, reducing re-weighs and downtime. With a battery life of 300 h on three AA cells, the unit maintains availability across long shifts, helping to streamline routine logistics and quality checks. Built for safety and dependable use on site Certified by TÜV to EN 13155 (loose load lifting devices) and EN 61010‑1 (electrical safety), the instrument supports compliant operation in demanding environments. The supplied stainless steel carabiner and hook with safety lock minimise accidental release during lifting. Compact dimensions (82 × 43 × 153 mm) and a device weight of 0.26 kg make suspension and handling straightforward while preserving the mechanical confidence required on construction sites and in workshops. Readability and functions that reduce errors A sharp LCD with 12 mm digit height improves legibility in varied lighting, while the selectable Hold function (automatic at stabilisation or manual via the hold button) freezes results for convenient recording. The integrated Peak‑Hold feature captures transient maximum loads, useful for checking dynamic stresses or verifying load limits. These functions translate measurement data into actionable information, cutting handling time and improving traceability. Versatile application across industry and leisure The device suits a wide range of uses including building sites, warehouse logistics, workshop applications, food industry checks and fieldwork such as hunting and fishing. Its robust certification and portable format mean the hanging scale works equally well for heavier industrial checks and practical domestic tasks like weighing luggage or produce. Clear display and safety fittings make it a practical choice where speed and reliability matter most. For tailored advice on KERN hanging scales or to arrange supply from Metav Werkzeuge in Emmerich, please contact our experts by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — we will recommend the suitable configuration for the intended application. Technical data Article number: HCB SKU: HCB.200K500 GTIN: 4045761030121 Manufacturer: KERN Key figures Capacity: 200 kg Readability / Resolution: 0.5 kg Reproducibility: 0.5 kg Linearity: ±1 kg Measurement frequency: 5 Hz Display digit height: 12 mm Display type: LCD Battery: 3 × 1.5 V AA Battery life: 300 h Device weight: 0.26 kg Operating temperature: 5 °C–35 °C Max. ambient humidity: 80 % Features TÜV-certified to EN 13155 and EN 61010-1 Hold function (auto and manual) Peak‑Hold (spike/peak display) Stainless steel carabiner with safety lock Stainless steel hook Weighing system: strain gauge Origin: CN HS code: 84238220 FAQ How accurate is the scale for daily checks? The KERN HCB 200K500 provides a readability of 0.5 kg and linearity of ±1 kg, suitable for routine control weighing where 0.5 kg resolution meets process requirements. Can the display be frozen for documentation? Yes; the hanging scale features an automatic stabilisation hold and a manual Hold function that freezes the LCD value for easy recording. Is the device suitable for outdoor or construction use? The unit is TÜV‑certified and fitted with stainless steel carabiner and hook with safety lock, making it appropriate for many on‑site applications within the specified operating temperature and humidity limits. What power source does the instrument require and how long does it run? Power is supplied by three 1.5 V AA batteries; typical battery life is approximately 300 hours under normal use. Does the scale capture transient peak loads? Yes; the Peak‑Hold feature registers and displays maximum load peaks, useful for dynamic load checks. Manufacturer: KERN; Address: not provided; Contact: not provided
2000 kg Pallet Truck Scale With IP67 Dust And Splash Protection, 1 kg Readability - KERN
Combine high-capacity performance with reliable IP65/67 protection and simple PRE‑TARE handling for consistent throughput and fewer weighing errors; order the KERN VHB 2T1 directly via Metav Werkzeuge or consult our specialists for application advice. KERN VHB 2T1 weighing pallet truck — 2,000 kg range, IP65/67 protection The KERN VHB 2T1 is a weighing pallet truck designed for industrial logistics and production, offering a 2,000 kg weighing range with rugged dust and splash protection. 2000 kg capacity with 1 kg readability IP65/67 dust and splash protection PRE‑TARE for container weight subtraction Tandem rollers for easy threshold crossing High-capacity weighing that keeps operations moving The combination of a capacity 2000 kg and readability 1 kg provides a dependable basis for load control and inventory handling in busy warehouses. The integrated strain gauge weighing system delivers stable readings with a reproducibility of 1 kg and linearity within ±2 kg, supporting routine checks and batch documentation. The unit also offers weight summation, reducing the need to record intermediate values manually and streamlining palletisation and dispatch processes. Durable protection for wet and dusty environments Built to withstand demanding conditions, the truck features an indicator with IP65 dust and splash protection while the load fork is IP67 rated for short-term exposure to wet areas. This level of protection reduces downtime for cleaning and maintenance and extends service intervals, so production lines experience fewer interruptions. Robust components such as full rubber wheels on aluminium rims and tandem rollers ensure reliable mobility across thresholds and uneven surfaces. Ergonomic design to speed handling and reduce errors A clear LCD 28 mm display and a PRE‑TARE memory for known container weights make repeated filling and checking tasks quicker and less error-prone. Steering with a 206° swivel range improves manoeuvrability in tight aisles, while the summation function allows cumulative weighing without extra paperwork. The truck runs on 4×1.5 V AA batteries with an approximate 80 h operating time, giving extended autonomy on the shop floor and straightforward battery replacement. Practical features for integration and day-to-day use The weighing pallet truck supports common industrial workflows such as order picking, recycling, and production feed with features like container-weight storage and temporary wet-area capability. The LCD indicator, compact design and plastic housing ease handling and reduce the risk of damage during transport. For workshops seeking reliable metrology without complex setup, this solution balances rugged construction with precise weighing functionality to maintain throughput and compliance. For tailored guidance and rapid supply from our Emmerich warehouse, choose the KERN VHB 2T1 via Metav Werkzeuge — contact Metav Werkzeuge by email at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and order support. Technical Data Article number: VHB SKU: VHB.2T1 GTIN: 4045761086258 Manufacturer: KERN Country of origin: CN Facts Weighing range: 2000 kg Readability: 1 kg Weight (device): 106 kg Display digit height: 28 mm Display type: LCD Battery: 4×1.5 V AA Battery life: 80 h Operating temperature: −10 °C to 40 °C Linearity: ±2 kg Reproducibility: 1 kg Max ambient humidity: 95 % IP protection: IP67 Weighing system: Strain gauge Tariff number: 84238220 Special features PRE‑TARE function for container deduction Plastic indicator housing with IP65 protection Load fork with IP67 short-term wet use capability Storage for a container weight Summing of weight values Tandem tyre load rollers for easier threshold crossing Full rubber wheels on aluminium rims 206° steering range Suitable for warehouse logistics and production FAQ What is the maximum capacity and resolution of the pallet truck? The KERN VHB 2T1 weighing pallet truck provides a maximum capacity of 2000 kg with a readability of 1 kg, suitable for palletised loads in industrial settings. How water- and dust-resistant is the equipment? The indicator housing offers IP65 protection while the load fork is rated IP67 for short-term exposure to wet areas, allowing the KERN VHB 2T1 to be used in dusty environments and occasional damp conditions. How does the PRE‑TARE function work and when is it useful? PRE‑TARE stores a known container weight so it can be automatically subtracted from gross readings; this feature on the KERN VHB 2T1 speeds up filling and quality checks by eliminating repeated manual deductions. What mobility advantages do the wheels and rollers provide? With tandem rollers and full rubber wheels on aluminium rims, the truck eases passage over thresholds and uneven floors, reducing push effort and improving safety during frequent moves. How long does the battery last and what type is required? The truck operates on 4×1.5 V AA batteries with an approximate operating time of 80 h, making battery replacement straightforward and keeping downtime to a minimum. KERN — Origin: CN — Seller: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930
200kg Hanging Scale 0.1kg Readability Peak-Hold, Stainless Steel Hook & Karabiner, LCD 12mm - KERN
Take advantage of a compact, TÜV‑certified hanging scale that combines a 200 kg capacity with 0.1 kg readability and a long battery runtime for reliable control weighing in logistics and workshops. Order directly via Metav Werkzeuge or request tailored advice from their consultants. KERN HCB 200K100 Hanging Scale — 200 kg capacity, 0.1 kg readability A KERN HCB 200K100 hanging scale designed for fast control weighing in warehouse logistics, workshops and outdoor tasks such as hunting and fishing 200 kg range with 0.1 kg readability TÜV-certified to EN 13155 and EN 61010-1 Hold and peak‑hold functions for clear readings Stainless-steel carabiner and hook, safety lock Robust capacity with professional weighing performance The hanging instrument offers a 200 kg weighing range combined with a 0.1 kg graduation, providing a balance between capacity and resolution that suits incoming/outgoing goods checks and heavier workshop parts. The measuring element is a strain‑gauge load cell, delivering consistent signals that result in a repeatability of 0.1 kg and a linearity of ±0.2 kg. The device registers measurements at 5 Hz, which is sufficient for stable load readings while reducing display jitter during handling. This technical set-up supports rapid decision-making in quality control processes and reduces the need for repeated measurements. Easy reading and safe handling for everyday use An LCD display with 12 mm digit height ensures values remain legible at a distance, while the integrated Hold and Peak‑Hold functions allow the weight to be frozen automatically or manually for convenient documentation. The scale is supplied with a stainless‑steel carabiner and hook featuring a safety lock, simplifying secure attachment and minimising slippage risks when lifting. At just 0.26 kg device weight and powered by three AA cells with an approximate runtime of 300 h, the unit is portable and ready for long shifts without frequent battery changes. Operational limits are 5 °C to 35 °C and up to 80% relative humidity, matching common indoor and sheltered outdoor environments. Certified safety and uninterrupted workflow Safety and electrical compliance are covered: the instrument carries TÜV certification to EN 13155 (loose lifting attachments/break safety) and EN 61010‑1 (electrical safety), which supports use in professional environments where documented conformity is required. The strain‑gauge system and clear specification of reproducibility and linearity provide traceable performance data for routine checks. Simple battery replacement and the compact housing design reduce maintenance time and help keep weighing operations flowing with minimal interruption. Contact Metav Werkzeuge in Emmerich for expert advice and reliable supply of the KERN HCB 200K100 hanging scale; technical consultants are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930, with WhatsApp at +49 170 2837271 Technical data Article number: HCB SKU: HCB.200K100 GTIN: 4045761069039 Manufacturer: KERN Origin: CN Facts Weighing range: 200 kg Readability (d): 0.1 kg Reproducibility: 0.1 kg Linearity: ±0.2 kg Display digit height: 12 mm Measurement frequency: 5 Hz Power supply: 3×1.5 V AA Battery running time: 300 h Device weight: 0.26 kg Operating temperature: 5 °C – 35 °C Max. relative humidity: 80% Dimensions (without removable parts): 82 × 43 × 153 mm Tariff number: 84238220 EClass: 27320106 Special features Display type: LCD Weighing system: strain‑gauge load cell Certifications: TÜV to EN 13155 and EN 61010‑1 Hold function: automatic and manual freeze Peak‑hold function (spike/peak display) Stainless‑steel carabiner with safety lock and stainless‑steel hook Suitable applications: construction sites, warehouse logistics, workshops, food industry, hunting, small animal weighing and breeding FAQ How accurate is the KERN HCB 200K100 for control weighing? The KERN HCB 200K100 provides a readability of 0.1 kg with a reproducibility of 0.1 kg and linearity of ±0.2 kg, suitable for routine control weighing and inventory checks. What power source does the scale use and how long does it last? The hanging scale runs on 3×1.5 V AA batteries and achieves approximately 300 h of operation under standard conditions. Is the unit safe for professional lifting and handling? Yes. The scale is TÜV‑certified to EN 13155 (loose lifting attachments) and EN 61010‑1 (electrical safety), supporting safe use in professional environments. Can the device be used outdoors for hunting or weighing fish? The instrument is suitable for outdoor sheltered use within its operating range (5 °C–35 °C, max. 80% humidity) and is frequently used for fishing, hunting and similar tasks. What mounting and handling accessories are included? The scale is supplied with a stainless‑steel carabiner featuring a safety lock and a stainless‑steel hook for secure attachment during weighing. Manufacturer: KERN — Address: not provided — Contact: not provided
200kg Hanging Scale IP65, 0.5kg Readability, Stainless Steel Housing, Peak‑Hold, Carabiner Hook - KERN
Robust stainless-steel construction with IP65 protection and clear 0.5 kg readability ensure reliable, fast control weighing in busy production and logistics areas; order the unit directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN HCN 200K500IP Hanging scale — 200 kg capacity, IP65 stainless-steel The KERN HCN 200K500IP is a compact hanging scale designed for rapid control weighing across logistics, fisheries and industrial environments, offering practical features for daily use. 200 kg capacity, 0.5 kg readability Stainless-steel housing with IP65 protection TÜV-certified to EN 13155 and EN 61010-1 Hold and Peak-Hold functions for easy reading Stainless-steel carabiner and hook included Fast, dependable checks to keep workflows moving The instrument combines a high 200 kg capacity with a clarity of 0.5 kg readability, enabling swift acceptance and dispatch checks without time-consuming transfers to bench scales. The measurement chain uses a strain gauge system and an internal frequency of 5 Hz, which guarantees stable indications even when loads are slightly moving; this reduces re-weigh cycles and speeds up throughput. By delivering repeatable results at a practical resolution, the unit supports efficient quality control and inventory handling in busy operations. Built to withstand dust, spray and frequent handling Engineered with a stainless-steel casing and IP65 ingress protection, the hanging scale resists dust ingress and water spray, making it suitable for environments such as packing areas, fish markets and sheltered outdoor sites. Compliance with TÜV requirements — specifically EN 13155 and EN 61010-1 — confirms both mechanical safety for loose-load lifting components and electrical safety for workplace use. The compact footprint (96 × 48 × 179 mm) and robust build ensure longevity under regular use while keeping handling simple and safe. Practical functions for clear readings and secure handling A clear LCD with 12 mm high digits, combined with Hold and Peak-Hold modes, simplifies reading transient loads or capturing peak weights from swinging items; these functions minimise handling and measurement error. Power is supplied by 2×1.5 V AA batteries with a battery life 200 h, supporting long inspection cycles without frequent battery changes. Performance characteristics such as ±1 kg linearity and reproducibility 0.5 kg are provided to help integrate the scale into existing quality routines and documentation, ensuring measurements can be referenced confidently in operations and records. For expert advice on integrating the KERN HCN 200K500IP into your workflow or to reserve stock, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: HCN.200K500IP Manufacturer: KERN GTIN: 4045761083950 Article number: HCN Numbers / Core technical data Weighing range max: 200 kg Readability: 0.5 kg Product weight: 0.5 kg Dimensions: 96 × 48 × 179 mm Display digit height: 12 mm Display type: LCD Battery: 2×1.5 V AA Battery operating time: 200 h Operating temperature: 5 °C–35 °C Max humidity: 80% Linearity: ± 1 kg Reproducibility: 0.5 kg Designs / Special features Housing: stainless steel Protection class: IP 65 Weighing system: strain gauge Hold and Peak-Hold functions Stainless-steel carabiner and hook included TÜV: EN 13155, EN 61010-1 Measurement frequency: 5 Hz FAQ What is the smallest weight increment this scale shows? The KERN HCN 200K500IP provides a readability of 0.5 kg, making it suitable for routine control weighing where half-kilogram increments meet process requirements. Is the scale suitable for damp or dusty environments? Yes. The stainless-steel construction combined with IP65 protection protects against dust and water spray, so the instrument performs reliably in packing halls, fish processing areas and similar environments when used within the specified temperature range. How is the unit powered and how long does the battery last? The unit runs on 2×1.5 V AA batteries and achieves a typical battery life of 200 h, reducing downtime for battery changes during regular use. Which safety and electrical standards does it meet? The hanging scale is TÜV-certified and complies with EN 13155 for loose-load lifters and EN 61010-1 for electrical safety, reflecting verified mechanical and electrical safety features. For which applications is this hanging scale recommended? This hanging scale is intended for quick control weighing in logistics and warehousing, the food and fisheries sectors, construction sites and agricultural settings where a compact, robust instrument is required. KERN — Origin: CN. Metav Werkzeuge, Emmerich am Rhein | info@metav-werkzeuge.com | +49 2822 7131930
20kg Hanging Scale Three-Point Hook, 10g Readability, LCD Display, Peak-Hold, Stainless Steel Carabiner - KERN
Take advantage of the combination of 20 kg capacity, 10 g readability and robust stainless‑steel fittings for reliable, repeatable control weighing. Order directly via Metav Werkzeuge from our Emmerich warehouse or consult our specialists for application advice. KERN HCB 20K10 Hanging Scale — compact 20 kg range with 10 g readability The KERN HCB 20K10 is a portable hanging scale designed for fast control weighing in logistics, workshops and outdoor tasks, offering clear readings and secure fastening for increased operational efficiency TÜV-certified to EN 13155 and EN 61010-1 20 kg range with 10 g readability Hold and Peak‑Hold for easy readings Stainless steel carabiner and safety hook LCD display with 12 mm digits Fast, dependable weighing for incoming and outgoing goods The HCB 20K10 combines a 20 kg measuring range with 10 g readability and a strain gauge load cell, delivering precise results for routine checks in goods receipt, shipping and workshop control. The device’s linearity ±20 g and reproducibility 10 g provide a predictable measurement basis, which simplifies documentation and quality control processes. With a measurement frequency of 5 Hz, readings update swiftly, reducing handling time and improving throughput in busy packing or inspection stations. Practical handling that reduces rework and saves time Ergonomic features such as a clear LCD with 12 mm digit height and a multi‑mode Hold function allow measurements to be frozen automatically at rest or manually via the dedicated key, making it straightforward to record weights in awkward positions. The integrated Peak‑Hold mode captures transient peak loads, useful for checking maximum tension or verifying packed items. Powered by 3×1.5 V AA batteries with an expected runtime of 300 h, the unit stays operational across extended shifts without frequent battery changes, while the compact device weight of 0.26 kg keeps handling effort low. Built for safety and diverse workshop applications Safety and robustness are central to the design: the scale is TÜV‑certified to EN 13155 (loose load lift attachments / fracture safety) and EN 61010‑1 (electrical safety), and is supplied with a stainless‑steel carabiner and hook with safety closure for secure attachment. These characteristics make it suitable for construction sites, warehouse logistics, food production and small‑animal weighing, where reliable fastening and certified safety standards are essential. The device operates reliably between 5 °C and 35 °C with up to 80% ambient humidity, enabling use in many standard working environments. Contact Metav Werkzeuge in Emmerich for tailored advice on applications and procurement of the KERN HCB 20K10; email info@metav-werkzeuge.com or call +49 2822 7131930 for rapid, reliable fulfilment from our European quality filter Technical data Article number: HCB.20K10 SKU: HCB.20K10 Manufacturer: KERN GTIN: 4045761069046 Origin: CN Facts Max. capacity: 20,000 g Readability: 10 g Linearity: ± 20 g Reproducibility: 10 g Measurement frequency: 5 Hz Display digits height: 12 mm Display type: LCD Power supply: 3×1.5 V AA Battery life: 300 h Operating temperature: 5 °C–35 °C Weight: 0.26 kg Wagesystem: Strain gauge Special features TÜV certification EN 13155, EN 61010-1 Hold function (automatic/manual) Peak‑Hold (maximum load display) Stainless steel carabiner with safety lock Stainless steel hook included Ideal for logistics, workshops, food industry, hunting and small‑animal weighing FAQ What is the maximum load capacity of the scale? The KERN HCB 20K10 has a maximum capacity of 20 kg (20,000 g). How fine are the measurements and how consistent are they? Readability is 10 g with reproducibility of 10 g and linearity of ±20 g, providing consistent control weighing for routine checks. Can transient loads be captured during weighing? Yes, the unit offers a Peak‑Hold function that displays the highest measured load for verification purposes. What power source does the device use and how long does it run? The scale uses 3×1.5 V AA batteries and achieves an estimated runtime of 300 hours under typical use. Is the device certified for safe use with suspended loads? The scale is TÜV‑certified to EN 13155 for loose load attachment safety and to EN 61010‑1 for electrical safety. Manufacturer: KERN — Origin: CN — Contact: not specified
20kg Precision Platform Scale 0.1g Readability, Stainless Steel Pan, LCD, KUP IoT Ready - KERN
Take advantage of lab-grade accuracy and seamless digital integration to keep production and quality-control workflows efficient; the combination of a 20 kg weighing range with 0.0001 kg readability and IoT-ready interfaces ensures precise results and straightforward data transfer — order directly via Metav Werkzeuge or consult our specialists for configuration advice. KERN DS 20K0.1 — Precision industrial platform scale, 20 kg capacity, 0.1 g readability The KERN DS 20K0.1 is a precision industrial platform scale designed for laboratory-grade weighing, counting and integration into Industry 4.0 environments, suitable for quality assurance and production-line applications. Lab-grade readability 0.0001 kg 20 kg capacity for heavy samples Stainless steel platform 308×318 mm IoT-ready: KUP interfaces and KCP protocol Reliable precision for quality control Built for tasks that demand consistent accuracy, the scale offers readability 0.0001 kg and reproducibility 0.1 g, giving a verifiable basis for pass/fail decisions and process control. The strain gauge weighing system delivers stable measurements even with larger sample volumes, while the linearity specification (±0.3 g) documents the expected deviation across the range. Where counting is required, the instrument’s automatic reference optimisation progressively refines the average piece weight, reducing variance and supporting reliable inventory checks and assembly processes. Seamless digital integration for modern workflows Integration into digital systems is simplified by the KERN Universal Port (KUP), which permits connection of adapters for RS-232, USB, Bluetooth, WLAN or Ethernet without internal modification. The KERN Communication Protocol (KCP) enables remote querying and control from external PLCs or computers, so weighing data can feed directly into MES or ERP systems. As an IoT-ready device with freely programmable display units (for example g/m or g/m²), it supports customised measurement outputs for specialised production steps and automates data capture to accelerate reporting and traceability. Practical design that supports daily use and safety The platform is made from stainless steel, sized for common containers at 308×318 mm with a 75 mm platform height, and the unit weighs 7.5 kg for stable placement and ease of repositioning. Operation is user-friendly thanks to a step-by-step yes/no dialog on the clear LCD (18 mm digit height) and a numeric tare function for known container weights, which simplifies filling and dosing tasks. Power is provided by a multi-region mains adapter (CH, EURO, UK, US); a rechargeable battery is available as an option with a typical charge time of 10 h. A protective dust cover is included to maintain instrument condition in workshop or production environments, and compatibility with KERN EasyTouch software supports straightforward data capture and analysis. Choose KERN precision for accurate, digitally connected weighing — contact Metav Werkzeuge in Emmerich for specialist advice and reliable supply via info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Technical data SKU: DS.20K0.1 Manufacturer: KERN GTIN: 4045761096219 Country of origin: Germany Key figures Weighing range: 20,000 g Readability: 0.0001 kg (0.1 g) Reproducibility: 0.1 g Linearity: ±0.3 g Smallest piece weight (lab): 100 mg Display digit height: 18 mm Platform dimensions: 308×318×75 mm Operating temperature: 10°C–40°C Unit weight: 7.5 kg Battery charge time (optional): 10 h Input voltage (mains adapter): 100 V–240 V Features Weighing plate material: stainless steel Weighing system: strain gauge Display type: LCD Interfaces: KUP port for RS-232 / USB / Bluetooth / WLAN / Ethernet Protocol: KCP for remote control and data queries Included: protective dust cover Power supply: mains adapter CH, EURO, UK, US Software compatibility: KERN EasyTouch IoT-ready configuration and programmable weight units FAQ How accurate is the scale for routine quality checks? The KERN DS 20K0.1 provides readability of 0.0001 kg and reproducibility of 0.1 g, which supports laboratory-level accuracy for routine quality-assurance tasks and pass/fail criteria. Can the scale be connected to a production control system? Yes. The unit features the KUP port for external adapters and supports the KCP protocol, enabling integration with PLCs, MES or other control systems for automated data exchange. Is the platform suitable for counting small parts? Counting is supported: the scale’s automatic reference optimisation improves the average piece-weight calculation, and the smallest reproducible piece weight in the laboratory mode is 100 mg. What environmental conditions does the scale require? The instrument is specified for operation between 10°C and 40°C with a maximum relative humidity of 80%, ensuring reliable performance under typical workshop and lab conditions. Does the delivery include a protective cover and power adaptor? A protective dust cover is included and the mains adapter set covers CH, EURO, UK and US plug types for immediate commissioning. KERN — Germany — Dealer contact: info@metav-werkzeuge.com, +49 2822 7131930
24 kg Platform Scale Stainless Steel Platform, 0.002 kg Resolution, IP65 - KERN
Take advantage of the combination of a stainless steel platform, precise readability of 0.002 kg and robust IP65 protection for dependable shipping and production weighing; order directly via Metav Werkzeuge or consult our specialists for integration advice. KERN DE 24K2A – stainless-steel platform scale with IP65 indicator and 24 kg capacity KERN DE 24K2A is a compact platform scale designed for shipping, warehouse and industrial quality control where precise, mobile weighing and easy cleaning are required Stainless-steel weighing plate for hygienic operation Battery operation and mains adapters included for mobility IP65-protected indicator for dusty or damp environments PRE-TARE and recipe functions for process control Precision that supports reliable shipping and inventory control The 24 kg capacity combined with a readability of 0.002 kg (2 g) and a reproducibility of 0.002 kg ensures consistent measurements for postage, parcel checks and component batching. The scale uses a strain-gauge weighing system, which converts mechanical load into an accurate electrical signal; this technology provides stable results even in dynamic industrial settings. Linearity of ±0.006 kg means deviations across the range remain minimal, giving a solid basis for traceable workflows and quality documentation. The clear LCD display with 25 mm digit height simplifies reading in fast-paced environments. Mobility and flexible power options for multi-location use Designed for frequent repositioning, the unit combines a compact footprint with low weight of 4.8 kg, making it suitable for production lines, packing stations and mobile inspection points. Power options include a standard 9 V block battery and the possibility of an optional rechargeable battery with approx. 12 hours operating time and a 10-hour charge cycle, enabling cordless operation where sockets are not available. Included universal plug adapters (CH, EU, UK, US) and a mains plug-in power supply allow rapid commissioning in international sites. The combination of mains and battery operation supports uninterrupted processes and reduces downtime during shift changes. Robust construction for frequent cleaning and harsh conditions A stainless-steel weighing plate on a lacquered steel subframe resists corrosion and simplifies cleaning after packing or light-duty washing, while the housing of the indicator is made from durable plastic to reduce weight. The indicator is IP65-rated, providing dust tightness and protection against low-pressure water jets; this rating makes the unit suitable for dusty warehouse aisles and environments with occasional splashing. The physical design allows the display module to be positioned freestanding or wall-mounted, enabling ergonomic placement in tight workspaces and improving operator efficiency. Process functions that streamline repetitive tasks Built-in functions such as PRE-TARE for manual deduction of known container weight and the recipe function for sequentially adding components help to reduce cycle times and limit operator errors during assembly or filling operations. A freely programmable weighing unit permits direct readout in application-specific units (for example g/m or g/m²), reducing conversion steps and speeding up decision-making. The device includes a work protection cover for the indicator and supports simple integration into standard logistic processes where repeatability and documentation matter. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the KERN DE 24K2A platform scale into existing workflows and for information on on-site calibration options Technical data SKU: DE.24K2A GTIN: 4045761111226 Manufacturer: KERN Country of origin: China Article number (alt): DE-D/A Facts Weighing range: 24 kg Readability: 0.002 kg (2 g) Reproducibility: 0.002 kg Linearity: ±0.006 kg Platform size: 315 × 305 mm Housing dimensions: 310 × 305 × 75 mm Net weight: 4.8 kg Display digit height: 25 mm Operating temperature: 5 °C – 35 °C Max ambient humidity: 80% Power input: 220 V – 240 V AC, 50 Hz Battery runtime: 12 h Battery charge time: 10 h Special features Weighing plate: stainless steel Housing: plastic (indicator) Weighing system: strain-gauge Protection class: IP65 (indicator) PRE-TARE function included Recipe function for sequential weighing Freely programmable weighing unit Indicator: freestanding or wall-mounted Work protection cover included Plug adapters included (CH, EU, UK, US) Battery: 9 V block; optional rechargeable battery available FAQ What is the maximum capacity and precision of the scale? The KERN DE 24K2A platform scale offers a maximum capacity of 24 kg with a readability of 0.002 kg (2 g) and a linearity of ±0.006 kg. Can the scale be used without mains power? Yes. The device supports battery operation with a standard 9 V block and can be fitted with an optional rechargeable battery, providing approximately 12 hours of operation between charges. Is the indicator suitable for dusty or damp production areas? The indicator of the KERN DE 24K2A is IP65-rated, which provides protection against dust ingress and low-pressure water jets for reliable performance in challenging environments. Does the scale support tare and batching workflows? Yes. The unit includes a PRE-TARE function for container deduction and a recipe function that permits sequential addition and verification of component weights. What are the mounting options for the display module? The display can be positioned freestanding on a bench or secured to a wall for ergonomic reading and space-saving installation. Manufacturer: KERN — Origin: China — GTIN: 4045761111226
24000 g Industrial Table Scale With Rear Secondary Display, Stainless Steel Platform 253×228 mm - KERN
Take advantage of high-capacity weighing and clear dual-display readouts combined with robust stainless-steel construction to keep production checks reliable and efficient; order the FCB.24K2 bench scale directly via Metav Werkzeuge or ask our consultants for tailored advice. FCB.24K2 bench scale — 24,000 g capacity with rear secondary display, KERN The FCB.24K2 is a tabletop industrial scale designed for production and logistics environments, offering high capacity and a secondary display for straightforward operator and customer readouts. Stainless-steel weighing plate 24,000 g maximum capacity Rear second display on the scale back Battery operation or mains adapter included Reliable accuracy for quality control The instrument delivers consistent metrology performance based on a strain-gauge load cell system, providing a readability of 2 g, reproducibility 2 g and linearity ±6 g. These specifications mean that routine checks and batch controls can be performed with measurable repeatability, reducing scrap and rework. Explaining briefly: a strain-gauge sensor converts weight into an electrical signal, which the electronics translate into stable numeric results — ideal where traceable, repeatable weighing is required in a busy workshop. Clear, ergonomic readouts for faster workflows A rear secondary display complements the main LCD screen with 25 mm digits, enabling simultaneous visibility for operator and client or for two-station processes. The large digit height improves legibility across the bench, while the dual-display arrangement speeds handover and reduces misunderstandings during packing, goods-in or laboratory checks. The combined display concept supports faster throughput and lowers the likelihood of recording errors. Flexible power options and dependable runtime Power is provided via a 220–240 V AC, 50 Hz mains adapter (adapters for CH, EURO, UK and US included), while a 9 V block battery is supported for portable or interruption-tolerant use; a rechargeable battery is optional with a charging time of 10 h and a typical battery runtime of 12 h. This flexibility allows the unit to be deployed at fixed benches or moved between workstations without losing data continuity, supporting continuous operations and temporary setups. Robust construction built for industrial use The weighing plate is stainless steel, ensuring easy cleaning and longevity in workshop settings where contamination and frequent use are common. The housing dimensions of 322 × 267 × 91 mm and a net mass of 2.6 kg give a compact footprint with a stable base for repeatable results, while a maximum ambient humidity tolerance of 80% and an operating temperature range of 5°C–35°C match many indoor industrial environments. This combination of materials and tolerances supports long service life and low maintenance needs. Integration and traceability for production environments Equipped with a straightforward interface and a durable mechanical design, the scale is suitable for goods-in inspection, piece-counting tasks and general laboratory or production weighing. The strain-gauge system underpins consistent readings that integrate easily into quality-control routines. For traceability, the unit carries the SKU FCB.24K2 and GTIN 4045761202658, simplifying procurement and stock management across enterprise systems. For reliable industrial weighing backed by KERN quality, ask Metav Werkzeuge in Emmerich for a specification check or order advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer: KERN SKU: FCB.24K2 GTIN: 4045761202658 Commodity code: 84238129 Country of origin: CN Facts Maximum capacity: 24,000 g Readability (display): 2 g Reproducibility: 2 g Linearity: ±6 g Digit height: 25 mm Operating temperature: 5°C–35°C Maximum relative humidity: 80% Net weight: 2.6 kg Housing dimensions: 322 × 267 × 91 mm Power input: 220–240 V AC, 50 Hz Battery type: 9 V block Battery runtime: 12 h Rechargeable battery charging time (optional): 10 h Special features Weighing plate material: stainless steel Weighing system: strain-gauge load cell Display type: LCD Secondary display located on the rear of the scale Mains adapter variants included: CH; EURO; UK; US Optional rechargeable battery supported Designed for industrial and laboratory bench use FAQ What is the maximum weighing capacity of the scale? The scale offers a maximum capacity of 24,000 g, specified for the KERN FCB.24K2 bench scale. How precise is the FCB.24K2 for small weights? With a readability of 2 g and reproducibility of 2 g, the instrument is suitable for routine quality checks and piece-counting where this level of resolution meets the process requirements. Can the scale be used without mains power? Yes, the unit supports a 9 V block battery for portable operation; a rechargeable battery is optional and typically provides about 12 h runtime once charged. Is the weighing surface suitable for workshop environments? The weighing plate is stainless steel, which resists typical workshop wear and is easy to clean, making it appropriate for industrial and laboratory benches. How large are the display digits and why does that matter? The LCD features 25 mm high digits, improving legibility across the bench and accelerating handover between operator and recipient thanks to the rear secondary display. Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930
24kg Platform Scale With Flip/Flop Indicator, 25mm LCD Digits, IP65 - KERN
Benefit from a combination of IP65 protection, a 24 kg capacity and an extended 100 h battery runtime for dependable industrial weighing; order the unit through Metav Werkzeuge or consult our specialists for application advice. EOC.20K-3A Platform scale (flip/flop evaluation, IP65, 24 kg) by KERN The EOC.20K-3A is a compact platform scale with an integrated flip/flop evaluation unit, designed for robust industrial and workshop use where reliable checkweighing and piece counting are required. IP65 protection for harsh environments 24 kg maximum capacity 100 h battery runtime Stainless steel weighing plate Consistent accuracy that supports quality control The scale delivers precise results thanks to a strain gauge load cell and tight performance tolerances: reproducibility 0.002 kg and linearity ±0.006 kg. These specifications enable traceable and repeatable measurements for routine quality inspections and incoming goods checks. With a readability of 2 g, the instrument is suitable for many workshop tasks where fine tolerance is important without overcomplicating operation. The compact 300×300×110 mm platform combines a usable surface with clear, comparable metrics for process documentation. Durable design built for demanding environments Constructed with a stainless steel weighing plate and a plastic housing, the unit resists corrosion and is simple to clean after use. IP65 ingress protection guards the electronics from dust and water jets, extending service life in production areas. The scale’s operating range of −10 °C to 40 °C and a transport weight of 5.2 kg support flexible deployment across workshops and production lines while maintaining measurement integrity under varying ambient conditions. Flexible power management and clear readout A long 100 h battery runtime and a 3 h charging time provide extended autonomous operation when mains power is not available; an internal optional battery variant is supplied. The instrument accepts 100–240 V via a plug-in adapter set (CH, EU, UK), enabling immediate use in different regions. The LCD display with 25 mm digit height ensures results are legible at a glance, improving cycle times during rapid weighing or checkweighing operations without sacrificing clarity. Streamlined workflows with flip/flop evaluation and counting Equipped with a flip/flop evaluation device, the scale supports practical checkweighing modes for quick accept/reject decisions and efficient process control. Piece-counting functions specify a smallest part weight of 1 g (laboratory) and 10 g (normal), allowing accurate inventory tasks and parts-per-batch verification. The combination of a robust weighing system and operator-friendly display reduces inspection time and helps standardise throughput across production shifts. For application-specific advice, valuation or to arrange supply of the KERN EOC.20K-3A platform scale, contact Metav Werkzeuge in Emmerich – eMail info@metav-werkzeuge.com or call +49 2822 7131930 for direct support and ordering guidance Technical data Article number: EOC.20K-3A Manufacturer: KERN GTIN: 4045761198203 Origin: CN Category: Industrial scales Key specifications Capacity: 24 kg Readability: 2 g Reproducibility: 0.002 kg Linearity: ±0.006 kg Platform dimensions: 300×300×110 mm Weight: 5.2 kg Battery runtime: 100 h Charging time: 3 h Operating temperature: −10 °C to 40 °C IP rating: IP65 Display digit height: 25 mm Input voltage: 100 V–240 V, 0.4 A Features Weighing plate material: Stainless steel Housing material: Plastic Display type: LCD Weighing system: Strain gauge Evaluation: Flip/flop evaluation device Power adapters included: CH; EURO; UK Smallest part weight for counting: 1 g (laboratory), 10 g (normal) Maximum relative humidity: 80% Special feature: Without fine indicator FAQ What is the maximum capacity and readability of the scale? The EOC.20K-3A platform scale supports a maximum capacity of 24 kg with a readability of 2 g, enabling both coarse and relatively fine measurements for workshop applications. Is the scale suitable for wet or dusty production areas? Yes, the unit is IP65-rated and features a stainless steel weighing plate, making the platform scale suitable for environments with dust and occasional water exposure. How long does the battery last and how is it charged? The EOC.20K-3A offers a battery runtime of approximately 100 h and a charging time of 3 h; it accepts 100–240 V via the supplied plug-in adapters (CH, EU, UK). Can the scale be used for piece counting and small parts? Yes, the instrument includes a piece-counting mode with smallest part weight values of 1 g (laboratory) and 10 g (normal), supported by the flip/flop evaluation for efficient counting and checkweighing. What weighing technology is employed and what advantages does it offer? The scale uses a strain gauge load cell, which provides stable, repeatable measurements with low drift and good long-term reliability for industrial weighing tasks. Manufacturer: KERN (origin: CN)
25 kg Precision Table Scale Stainless Steel IP65, 0.005 kg Readability, Rechargeable - KERN
The combination of robust IP65 protection, high-precision measurement to 0.005 kg, and a stainless-steel, easy-to-clean design supports reliable quality control in hygienic and industrial environments; order the scale directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN FFN 25K5IPN — IP65 stainless-steel allround table scale, 25 kg range The KERN FFN 25K5IPN is a stainless-steel table scale designed for hygienically sensitive and industrial weighing tasks, offering 25 kg capacity and high-resolution measurement. IP65 dust and splash protection Stainless-steel weighing plate and housing High resolution: 0.005 kg readability Compact footprint for flexible placement Consistent accuracy for routine quality checks The stainless-steel weighing system delivers consistent results, with a readability of 0.005 kg and reproducibility of 0.005 kg, while linearity stays within ±0.01 kg. These measurable specifications translate into trustworthy daily control data, reducing rework and documentation discrepancies. The internal strain-gauge load cell ensures stable output and rapid settling, so each measurement can be processed into quality records with confidence. This emphasis on quantitative performance supports efficient, standards-compliant workflows in production and laboratory settings. Designed for hygienic and harsh environments With an IP65 enclosure and a stainless-steel weighing plate, the unit is suited to environments with elevated hygiene demands, such as food processing, pharmaceutical and chemical areas. Smooth surfaces and corrosion-resistant materials allow thorough cleaning and reduce contamination risk, which supports HACCP-compliant quality systems. The corrosion-resistant construction also suits rougher industrial conditions where regular washdowns or aggressive cleaning agents are used, combining longevity with straightforward sanitation procedures. Compact, manoeuvrable form for multiple workstations The scale’s compact footprint and moderate weight (about 3.85 kg) make it simple to relocate between workstations where fixed installations are impractical. The rectangular weighing area (233×193 mm) offers practical placement for a variety of containers while the housing dimensions (243×300×127 mm) keep the unit unobtrusive on crowded benches or in small laboratories. This compact design preserves valuable bench space and supports flexible processes, from portioning in a kitchen to sampling in QC laboratories. Clear display and reliable connectivity for process efficiency An LCD display with 25 mm digit height ensures readings are easy to read at a glance, reducing operator error and speeding up cycle times. The instrument accepts a wide mains input range (110–230 V AC) via the supplied plug adapters (CH, EURO, UK, US), facilitating fast commissioning across sites. The robust weighing electronics and strain-gauge technology provide reproducible data that integrate well with routine record-keeping, helping teams to maintain throughput without sacrificing traceability. For straightforward procurement and expert advice, request the KERN FFN 25K5IPN via Metav Werkzeuge — call or email our team in Emmerich for specification checks and product-matching guidance (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: FFN.25K5IPN SKU: FFN.25K5IPN GTIN: 4045761135918 Manufacturer: KERN Origin country: CN Tariff code: 84238129 Facts Capacity: 25 kg Readability / division: 0.005 kg Reproducibility: 0.005 kg Linearity: ± 0.01 kg Weighing plate (rectangular): 233×193 mm Housing dimensions (without removable parts): 243×300×127 mm Weight: 3.85 kg Display type: LCD Display digit height: 25 mm Operating temperature: −10 °C to 40 °C Max ambient humidity: 95 % Supply voltage: 110 V – 230 V AC Special features IP 65 protection Weighing plate made of stainless steel Stainless-steel housing, easy to clean Strain-gauge load cell (Dehnungsmessstreifen) Suitable for food industry, pharmaceutical and chemical applications Supports HACCP-compliant quality systems Supplied with plug adapters for CH, EURO, UK, US FAQ Is this scale suitable for food-industry use? The KERN FFN 25K5IPN is designed with a stainless-steel plate and housing and an IP 65 enclosure, making it suitable for hygienic areas and food-industry applications while supporting HACCP practices. What level of accuracy can be expected for routine measurements? Expect a readability of 0.005 kg and reproducibility of 0.005 kg with linearity within ± 0.01 kg, providing reliable precision for quality control and portioning tasks. Can the scale be used in wet or dusty production areas? The unit features IP 65 protection, offering dust and splash resistance appropriate for environments that require regular cleaning and protection from ingress. What size of items can be weighed on the platform? The rectangular weighing area measures 233×193 mm, suitable for a wide range of containers and samples typical in laboratories, kitchens and production benches. Which power supplies are compatible with the instrument? The instrument accepts 110–230 V AC and is supplied with plug adapters for CH, EURO, UK and US mains sockets. Manufacturer: KERN, Origin: CN
25kg Precision Table Scale IP65 Stainless Steel Platform 233×193mm 0.01kg Readability, Rechargeable - KERN
Data inconsistency detected: the product data contradicts itself regarding battery operation and IP65 protection. The battery field indicates no battery, while the product features state that IP65 protection applies only in battery operation. This contradiction creates uncertainty about the actual specifications of the product, making it difficult to determine whether the product is designed to function with a battery or without one. Additionally, the conflicting information regarding IP65 protection raises questions about its applicability and reliability under different operational conditions. Unable to generate a reliable product description due to these conflicting entries, further clarification or correction of the data is required to ensure accuracy.
3 kg / 6 kg Price Computing Scale 0.001 kg / 0.002 kg Readability, Stainless Steel Pan, LCD Display - KERN
Compact, high‑precision retail weighing that combines a compact design, clear LCD readouts and price‑calculation memory for efficient point‑of‑sale use; ideal where space, speed and legal verifiability matter. Order the KERN RPB 6K1DHM directly via Metav Werkzeuge or ask our consultants if needed. KERN RPB 6K1DHM – Price‑computing retail scale with 3/6 kg ranges and 0.001/0.002 kg readability The KERN RPB 6K1DHM is a compact price‑computing retail scale designed for shops, market stalls and food service, enabling quick weighing and on‑the‑spot price calculation with selectable unit pricing. Compact ergonomic design saves counter space Three displays: weight, unit price, total price Switchable base price from €/kg to €/100 g Stainless steel weighing plate, 204×263 mm Improve till speed with a compact, professional design The RPB series delivers a compact design that reduces counter clutter while supporting efficient sales processes. A backlit high display mounted on a rotatable stand (approx. 480 mm) ensures figures remain legible from both sides of the counter; this contributes to faster transactions and fewer customer queries. The machine’s light weight and small footprint make it suitable for tightly spaced retail environments without compromising stability or durability. Accurate weighing and clear price calculation for retail Equipped with a strain gauge weighing system and selectable ranges of 3 kg / 6 kg, the unit provides legal‑for‑trade readabilities of 0.001 kg / 0.002 kg and reproducibility to the same values. The three displays show weight, base price and sale price simultaneously, reducing operator input and calculation errors. The stainless steel weighing plate (204×263 mm) offers a hygienic, easy‑clean surface for food handling and frequent use. Flexible operation and practical functions for multiple locations Designed for mobility, the scale supports battery operation as an option and is supplied with multi‑plug mains adapters (CH, EURO, UK, US) to match installation needs. A built‑in memory for article prices and the Auto‑Clear function — which resets the base price when the weighing platform is unloaded — streamline repetitive sales tasks and lower the risk of pricing mistakes during busy periods. Compliance and simple preparation for legal use The unit is suited to retail applications where official verification is required. For legal‑for‑trade operation the initial verification (conformity assessment under NAWI 2014/31/EU) must be ordered at the time of purchase; the scale can be supplied prepared for official verification on delivery. Clear numerical indicators and an LCD readout with a 15 mm digit height support auditability and reduce training time for staff. Contact Metav Werkzeuge in Emmerich by email or phone to discuss calibration options, place an order for the KERN RPB 6K1DHM and ensure compliant installation Technical Data Article number: RFC SKU: RPB.6K1DHM Manufacturer: KERN GTIN: 4045761204812 Country of origin: CN Key numerical data Weighing ranges: 3 kg; 6 kg Readability / verification values: 0.001 kg; 0.002 kg Display digit height: 15 mm Weighing plate (W×D): 204×263 mm Overall dimensions (W×D×H): 313×263×108 mm Net weight: 3.2 kg Operating temperature: −10 °C – 40 °C Supply voltage: 220 V – 240 V AC, 50 Hz Battery: optional, charge time 12 h Special features Weighing system: strain gauge Display type: LCD, backlit Three displays: weight, base price, sale price Base price switchable between €/kg and €/100 g Auto‑Clear function for base price reset Memory for article prices Work protection cover included Multi‑plug mains adapters included (CH, EURO, UK, US) Legal verification available (order initial verification per NAWI 2014/31/EU) Suitable for retail, markets, gastronomy and food industry FAQ Is the RPB 6K1DHM suitable for legal‑for‑trade use? For legal‑for‑trade operation the KERN RPB 6K1DHM requires initial verification under NAWI 2014/31/EU, which must be ordered at the time of purchase to ensure the scale is delivered ready for official use. What are the weighing ranges and resolution of the scale? The retail scale offers weighing ranges of 3 kg and 6 kg with readabilities of 0.001 kg and 0.002 kg respectively, providing accurate measurement for typical retail items. Can the scale be used without mains power? Battery operation is available as an option for the KERN RPB 6K1DHM; the unit is supplied without battery but supports an optional rechargeable battery with a typical charge time of 12 hours. How large is the weighing surface and is it easy to clean? The device features a stainless steel weighing plate measuring 204×263 mm, which is durable and straightforward to clean, making it suitable for food handling. Which displays are visible to the customer and operator? The scale has three distinct readouts for weight, base price and sale price, plus a rotatable, backlit high display mounted on a stand to ensure clear visibility for both operator and customer. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930
3 kg / 6 kg Price-Calculating Retail Scale 1 g/2 g Readability, Stainless Steel Pan, LCD Triple Display, IP65? - KERN
Take advantage of the robust construction, high readability and intuitive price-computing functions for reliable retail transactions; the combination of a stainless-steel weighing plate and a dirt-repellent housing ensures hygienic operation and long service life. Order the KERN RIB 6K-3HM directly via Metav Werkzeuge or ask our consultants if needed. KERN RIB 6K-3HM – Price-calculating retail scale with high readability and three displays A practical price-calculating counter scale, the KERN RIB 6K-3HM is designed for shops, markets and food-industry environments where accurate weighing and clear price display are essential. Three displays for weight, base price and selling price High readability: 0.001 kg / 0.002 kg Stainless-steel weighing plate for hygiene Dirt-repellent design with protective cover Accurate weighing that reduces pricing errors The RIB 6K-3HM uses a strain gauge weighing system to deliver stable, repeatable results with a linearity of ±0.001 kg / 0.002 kg and the same values for reproducibility. With dual readability steps (0.001 kg and 0.002 kg) and multi-range switching, the device adapts automatically to load increases to maintain precision across the 3 kg and 6 kg ranges. This technical design minimises customer disputes at the point of sale and supports consistent pricing calculations in high-throughput retail environments. Faster transactions and clearer pricing information Equipped with three LCD displays—showing weight, base price and selling price—the scale simplifies sales processes and makes price verification straightforward for staff and customers alike. Ten direct-price keys accelerate repeated transactions for common items, while the large 18 mm digit height improves legibility across a busy sales counter. Energy management includes an automatic backlight shut-off after five seconds, balancing visibility with power efficiency to support long service intervals. Built for daily shop use and easy compliance The housing is constructed from durable plastic with a stainless-steel weighing plate and a dirt-repellent layout featuring water gutters and sealing rings over upper inlets. A protective work cover is included for added hygiene during transport and storage. For commercial applications that require official verification, the instrument is offered with calibration options; legal verification follows NAWI 2014/31/EU procedures and must be requested with the full installation address at the time of order to ensure conformity with national regulations. Practical power and environmental characteristics for retail settings The scale is lightweight and portable at 3.8 kg, making it suitable for fixed tills and mobile market stalls alike. It accepts a wide input voltage (100–240 V AC, 50/60 Hz) and is supplied with plug adapters for CH, EU and UK sockets. Designed to operate reliably between −10°C and 40°C and at up to 80% relative humidity, the instrument is suitable for typical retail and seasonal outdoor market conditions when protected. Multi-range automatic switching and clear status displays contribute to efficient throughput and fewer manual adjustments. Contact Metav Werkzeuge in Emmerich for tailored advice on calibration, configuration and ordering of the KERN RIB 6K-3HM Technical data Article number: RIB SKU: RIB.6K-3HM GTIN: 4045761180802 Manufacturer: KERN Origin: CN Core data Weighing range: 3 kg / 6 kg Readability (d): 0.001 kg / 0.002 kg Minimum weight: 0.02 kg / 0.04 kg Linearity: ±0.001 kg / 0.002 kg Reproducibility: 0.001 kg / 0.002 kg Weighing plate (W×D): 294×225 mm Housing dimensions (W×D×H): 325×340×115 mm Net weight: 3.8 kg Display digit height: 18 mm Power supply: 100–240 V AC 50/60 Hz, 0.4 Amax Operating temperature: −10°C to 40°C Relative humidity (max): 80% Legal verification class: III Weighing system: Strain gauge Features Housing: plastic; weighing plate: stainless steel Three LCD displays: weight, base price, selling price 10 direct price keys for frequent articles Backlit high display; adjustable energy-saving backlight Dirt-repellent design with water gutters and sealing rings Protective work cover included Plug adapters included: CH, EU, UK Calibration option available (legal verification required) FAQ Is the RIB 6K-3HM suitable for food sales and markets? Yes. The KERN RIB 6K-3HM features a stainless-steel weighing plate and a dirt-repellent housing design that make it suitable for shops, markets and food-industry use. How precise is the scale for price calculations? The instrument provides high readability (0.001 kg / 0.002 kg), with linearity and reproducibility at ±0.001 kg / 0.002 kg, enabling reliable weight-based pricing for small and midsize items. Can the scale be legally verified for commercial trade? Legal verification (Eichung) is available. For the KERN RIB 6K-3HM the verification must be requested with the full installation address at the time of order to comply with NAWI 2014/31/EU. What power options are supplied with the scale? The scale includes a mains adapter and plug adapters for CH, EU and UK sockets; input range is 100–240 V AC 50/60 Hz to suit most retail locations. Does the scale resist splashes and facilitate cleaning? Yes. The design includes water gutters and sealing rings to reduce contamination risk, and the stainless-steel weighing plate supports hygienic cleaning procedures. KERN — Origin: CN — Contact via Metav Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930
3 kg Counting Scale Precision Caliper Display 0.01 g Readability, Stainless Steel Pan, 100-Item Memory, Dual-Scale Interface - KERN
Taking advantage of the high-resolution 0.01 g readability and the 3 kg maximum capacity, this counting scale accelerates inventory tasks while maintaining traceable accuracy; integration via the second-scale interface and the 100-article memory supports expanded counting systems and efficient batch processes. Order the CFS 3K-5 directly via Metav Werkzeuge or ask our consultants if needed. KERN CFS 3K-5 — high-resolution counting scale with 0.01 g readability and second-scale interface The CFS 3K-5 is a precision counting scale designed for industrial inventory, quality control and production monitoring, combining high sensitivity with system-ready connectivity. High-resolution counting up to 75,000 points 100 article memory and second-scale interface Stainless steel weighing plate 295×225 mm Faster, more reliable counting for stock and pick operations The high sensitivity and 0.01 g readability enable accurate determination of small-piece quantities, which reduces rework and inventory variances. With automatic reference optimisation the average piece weight is refined across successive measurements, improving count stability for light components. The built-in 100-article memory and programmable reference entries simplify repeat tasks and speed up inventory cycles, while the clear LCD digits (20 mm) present weight, reference weight and total piece count simultaneously for unambiguous readings. Seamless integration into larger weighing systems Equipped with a second-scale interface, the unit can form part of a multi-scale, high-resolution counting system together with platform scales when higher capacities are required. The strain gauge weighing system (load cell) provides consistent electrical output for external logging or process control, making the instrument suitable for automated production lines. Count resolution up to 75,000 points allows reliable extrapolation of piece counts for very small parts, and the PRE-TARE and fill-to-target functions support repeatable filling and dosing tasks. Designed for daily industrial use and traceable results Constructed with a stainless steel weighing plate (295×225 mm) and a robust housing, the scale tolerates typical workshop environments while remaining easy to clean. The device offers defined linearity (± 0.1 g) and reproducibility (0.03 g), delivering repeatable results that support quality control documentation. Ambient operating specifications (0 °C–40 °C, up to 80% relative humidity) ensure stable performance in standard industrial and warehouse settings. Practical controls, signals and safety features that save time User-programmable reference piece counts and reference weights are entered via the keypad for quick setup, and three separate displays show weight, reference weight and total pieces to speed operator decisions. Checkweighing with optical and acoustic signals supports portioning and sorting, while the fill-to-target alarm confirms when a pre-set quantity or weight has been reached. A protective work cover is included to guard the platE during storage and transport, and multiple mains adapters are supplied (CH, EURO, UK, US) for immediate commissioning. Choose the KERN CFS 3K-5 for precise, fast counting in production and logistics—contact Metav Werkzeuge in Emmerich for technical advice or a tailored offer via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: CFS.3K-5 Manufacturer: KERN GTIN: 4045761144477 Facts Weighing range: 3 kg Readability: 0.01 g Weighing pan: 295×225 mm Housing dimensions: 315×350×100 mm Scale weight: 3.21 kg Display digit height: 20 mm Operating temperature: 0 °C–40 °C Max ambient humidity: 80% Linearity: ± 0.1 g Reproducibility: 0.03 g Smallest piece weight (laboratory): 50 mg Smallest piece weight (normal): 500 mg Power: 110 V–230 V AC Battery charge time: 14 h Weighing system: strain gauge Special features Weighing plate made from stainless steel LCD display with three-digit groups for weight, reference weight and total pieces 100-article memory Second-scale interface for multi-scale systems Checkweighing with optical and acoustic signal Fill-to-target function with alarm PRE-TARE function for known container weight Protective work cover included Adapter set included: CH, EURO, UK, US Counting resolution up to 75,000 points FAQ Is the scale suitable for small-component counting in electronics stock control? The CFS 3K-5 counting scale from KERN is engineered for small components; the 0.01 g readability and optimised reference routine enable accurate counts for very small parts when the average piece weight is within the instrument’s specifications. Can the scale be integrated into a larger weighing system for higher capacity? Yes. The second-scale interface allows the CFS 3K-5 to be combined with higher-capacity platform scales to create a high-resolution counting system suitable for expanded production or logistics setups. What features assist with filling and portioning tasks? Checkweighing with optical and acoustic signals, plus the fill-to-target and PRE-TARE functions, support controlled filling and dosing operations and provide clear confirmation when the target weight or piece count is reached. Are adapters included for different mains outlets? The delivery includes a mains adapter set for CH, EURO, UK and US plugs so the unit can be put into service without additional adaptors. Manufacturer: KERN; Country of origin: CN; GTIN: 4045761144477
3 kg Counting Scale With 0.2 g Readability, Large Item Memory, Checkweighing Display, Stainless Steel Pan - KERN
Benefit from a robust counting solution with a 3 kg capacity, 0.2 g readability and a large article memory that accelerates inventory and reduces counting errors. Combine high counting resolution and portable operation for reliable results across production sites. Order directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN CIB 3K-4 – Counting scale with 3 kg range and 0.2 g readability KERN CIB 3K-4 is a compact industrial counting scale designed for production, warehouse logistics and quality control, offering high-resolution counting and an intuitive checkweighing display. Robust counting scale, 30,000-point resolution Large article memory and 20 direct-access keys Optical and acoustic checkweighing signals Stainless steel weighing plate, mobile with battery Faster, more accurate counting for inventory cycles A high-resolution counting device delivers measurable efficiency gains: the 3 kg capacity with 0.2 g readability (0.0002 kg) and 30,000 counting resolution enables precise piece counts even for small components. The three separate displays present gross weight, reference weight and total piece count simultaneously, reducing operator errors and speeding up counting tasks. Automatic reference optimisation improves the average part-weight calculation during repeated counts, while PRE-TARE allows reliable subtraction of known container weights for exact net results. These capabilities translate into fewer recounts and a smoother annual inventory process. Portable, durable design for production and logistics Built for flexible deployment, the instrument features a stainless steel weighing plate (315×215 mm) and a strain-gauge weighing system that delivers reproducible measurements (reproducibility 0.0002 kg) under typical shop-floor conditions. Compact housing (350×330×120 mm) and a device weight of 3.52 kg make relocation between workstations straightforward, while battery operation is available for use at multiple sites. The LCD with 18 mm digits keeps readouts clear; energy management options such as the programmable backlight help extend operating time. Robust construction and practical dimensions support long-term use in production and logistics environments. Programmable memory and checkweighing to reduce errors To reduce process time and operator training, the scale offers extensive memory and programmable controls: 20 programmable direct keys and storage for 50 reference weights speed up repetitive tasks and reduce setup time. The checkweighing function signals results visually—the display colour changes for under/OK/over—and acoustically by varying tone frequency, supporting accurate portioning and quality checks in noisy or quiet environments alike. A covered housing and included protective cover increase longevity in daily use. These features cut downtime and help maintain consistent throughput across shifts and operators. Contact Metav Werkzeuge for advice on integrating the KERN CIB 3K-4 into existing workflows and to benefit from reliable supply from our Emmerich hub Technical Data Article number: TCIB-A SKU: CIB.3K-4 GTIN: 4045761214880 Manufacturer: KERN Facts Weighing range: 3 kg Readability: 0.0002 kg (0.2 g) Counting resolution: 30,000 points Reproducibility: 0.0002 kg Linearity: ±0.0004 kg Weighing pan: 315×215 mm Housing dimensions: 350×330×120 mm Device weight: 3.52 kg Display digit height: 18 mm Operating temperature: -10°C to 40°C Power input: 100V–240V AC 50/60Hz 0.4 Amax Special features Weighing plate made of stainless steel Weighing system: strain gauge Three displays: weight, reference weight, total piece count Optical and acoustic checkweighing signals PRE-TARE function and automatic reference optimisation 20 programmable direct keys, 50 reference weight memories Battery operation available; mains adapter included (CH; EURO; UK) Included: protective cover FAQ Is the scale suitable for mobile use? Yes. The KERN CIB 3K-4 supports battery operation and is compact and light (3.52 kg), making it suitable for relocation across workstations. What is the smallest piece weight the scale can count? In laboratory conditions the smallest detectable piece weight is 100 mg; under normal counting practice the practical smallest piece weight is 1 g for the KERN CIB 3K-4. How does checkweighing signalling work on this device? The CIB 3K-4 provides both optical and acoustic feedback: the display colour changes according to the checkweighing result and the tone frequency varies between under/OK/over, while three displays show weight, reference weight and total piece count. How many reference weights and shortcuts can be stored? The instrument stores up to 50 reference weights and PRE-TARE values, plus 20 freely assignable direct-access keys for rapid selection of frequent references. Is the weighing surface suitable for industrial use? Yes. The weighing pan is made of stainless steel (315×215 mm) and the strain-gauge system provides robust performance for production and logistics tasks. Manufacturer: KERN; Address: information not provided; Contact: information not provided
3 kg Industrial Scale 230×230 mm Stainless Steel Platform LCD 0.1 g Readability IP65 - KERN
Take advantage of the combination of IP65 protection, high readability of 0.1 g and a 3 kg capacity for dependable production weighing; order the instrument directly via Metav Werkzeuge or consult our advisors for specification support. IFB.3K-4 industrial scale by KERN — IP65, stainless steel plate, legal-for-trade The IFB.3K-4 is a heavy-duty industrial scale with legal‑for‑trade approval, engineered for accurate weighing and piece counting in production, quality control and laboratory settings. Legal approval for trade use IP65 protection against dust and water High precision: 0.1 g readability Stainless steel weighing plate, durable housing Consistent precision that supports quality control The instrument relies on a strain gauge weighing system that delivers a readability of 0.1 g and a reproducibility of 0.0001 kg, ensuring measurements are both precise and repeatable. This high level of resolution translates directly into fewer rejected batches and more reliable inventory figures. Linearity is specified at ±0.0003 kg, which reduces measurement uncertainty across the entire weighing range and supports traceable results for routine production checks. Built to withstand demanding environments Designed for practical workshop and production use, the unit combines a stainless steel weighing plate with a robust plastic housing and an IP65 rating for protection against dust and water ingress. The durable construction reduces downtime caused by cleaning or exposure to splash and particulate, while the compact platform dimensions make the balance suitable where bench space is limited. The scale’s solid build supports long service life and low maintenance intervals, contributing to predictable operating costs. Faster workflows with counting and clear readout The balance includes a clear LCD display with a digit height of 52 mm for rapid read-outs on the shop floor, plus counting capabilities with a minimum piece weight of 2 g for normal applications and 200 mg for laboratory counting mode. The combination of rapid stability, visible digits and reliable piece-count algorithms streamlines batch processing and reduces operator handling time. Power is supplied via a plug-in adaptor set covering AUS, CH, EURO, UK and US outlets for straightforward integration in multinational facilities. Traceability, calibration and dependable supply The instrument is supplied with legal-for-trade approval and is suitable where measurements must be auditable and conform to regulatory checks. Calibration can be performed in‑house or by certified partners to maintain conformity. Sourced through Metav Werkzeuge, the unit benefits from a European distribution approach that emphasises consistent stock management and quality filtering at the Emmerich location. This supply model reduces lead times and supports reliable replenishment for production-critical equipment. Discuss the KERN IFB.3K-4 with Metav Werkzeuge in Emmerich to confirm fit-for‑purpose specifications and arrange prompt delivery or tailored advice Technical data Article number: TIFB-A SKU: IFB.3K-4 GTIN: 4045761244016 Manufacturer: KERN Origin: CN ECLASS: 27320401 Tariff number: 84238129 Facts Capacity: 3 kg Readability: 0.1 g Reproducibility: 0.0001 kg Linearity: ±0.0003 kg Instrument weight: 4.5 kg Weighing plate rectangle: 230×230 mm Platform dimensions: 230×230×110 mm Display digit height: 52 mm Operating temperature: -10 °C – 40 °C Relative humidity (max): 80% Input voltage: 100 V – 240 V, 50 / 60 Hz Smallest piece weight (counting normal): 2 g Smallest piece weight (counting lab): 200 mg Special features Weighing system: strain gauge Housing: plastic; weighing plate: stainless steel Protection class: IP65 Legal‑for‑trade approval (heavy duty version) Power supply: plug‑in adaptor (AUS; CH; EURO; UK; US) No battery included FAQ What is the maximum capacity and precision of the scale? The scale has a maximum capacity of 3 kg with a readability of 0.1 g and reproducibility of 0.0001 kg for consistent results. Is the unit suitable for dusty or wet production areas? Yes. With an IP65 protection rating and a stainless steel weighing plate, the instrument is designed for environments where dust and light splashing occur. Can the balance be used for piece counting in production? The balance offers counting modes with a smallest piece weight of 2 g in normal counting and 200 mg in laboratory mode, enabling efficient batch counting. Does the scale include a power adaptor for different countries? A plug‑in power adaptor set for AUS, CH, EURO, UK and US is included to facilitate use in multiple regions. Is the IFB.3K-4 legally approved for trade? The heavy‑duty version is supplied with legal‑for‑trade approval and is suitable where audited weighing results are required. Manufacturer: KERN, Emmerich distribution centre — Contact: info@metav-werkzeuge.com / +49 2822 7131930
3 kg Platform Scale Stainless Steel Top, 0.1 g Readability, IP65 Protection, OIML R60 Class III - KERN
Planned investment in consistent accuracy and robust construction: the combination of a stainless-steel weighing plate, IP65-protected silicone-coated aluminium load cell and OIML R60 Class III, 3000 e approval ensures reliable legal-for-trade performance and long service life; order directly via Metav Werkzeuge or consult our specialists for application advice. KERN Platform KFP 3V20M – stainless-steel weighing platform with IP65 load cell The KFP 3V20M is a compact industrial platform designed for precise weighing up to 3 kg, ideal for workshop benches, production sampling and laboratory use Stainless-steel weighing plate Silicone-coated aluminium load cell, IP65 OIML R60 approval, Class III 3000 e Readability 0.1 g for fine resolution Compact footprint 230×230 mm Robust precision for routine industrial weighing The compact platform offers a maximum capacity of 3 kg combined with a display resolution of 0.1 g, delivering fine measurement detail while remaining straightforward to operate. The difference between display resolution and legal verification is important: the unit’s verified scale interval of 1 g confirms suitability for legal-for-trade applications where certification is required. A stainless-steel weighing plate and painted-steel underframe provide mechanical resilience in workshop environments, while the modest net mass of 3.7 kg and the small footprint (230×230 mm) permit easy integration into existing benches or process stations. Durable load cell and ingress protection for harsh environments Measurement stability is supported by a silicone-coated aluminium load cell with IP65 protection, which shields the sensing element against dust and splash water and extends service intervals in demanding settings. The platform carries OIML R60 approval (legal metrology) and meets Class III, 3000 e requirements, so calibrated results can be relied upon for traceable quality control. Built-in levelling aids—libelle and adjustable feet—ensure accurate zeroing and repeatable readings when mounted on uneven surfaces. Clear installation expectations and application suitability With rectangular platform dimensions of 230×230 mm and overall height trimmed to 230×230×110 mm, the module occupies minimal bench space while maintaining a minimum load capability from 20 g, allowing both small samples and bulk items to be weighed precisely. The construction materials and approvals make the platform suitable for routine industrial tasks, sample preparation and small-series production controls where robustness and traceability are required rather than high-speed conveyor integration. Documentation of the verification class and load-cell protection supports procurement and audit processes. Contact Metav Werkzeuge for supply and tailored advice on KERN weighing platforms — email info@metav-werkzeuge.com or call +49 2822 7131930 for swift, expert support from our Emmerich team Technical Data Article number: KFP-V20 SKU: KFP.3V20M GTIN: 4045761208254 Manufacturer: KERN Origin: CN Facts Weighing capacity: 3 kg Readability: 0.1 g Verification scale interval: 1 g Minimum weight: 20 g Platform dimensions: 230×230 mm Overall dimensions: 230×230×110 mm Net weight: 3.7 kg OIML class: Class III, 3000 e Special features Material: stainless-steel weighing plate Underframe: painted steel Load cell: silicone-coated aluminium, IP65 Level indicator and adjustable feet included Approval: OIML R60 (calibration capable) FAQ What is the maximum weighing capacity and resolution of this platform? The platform supports up to 3 kg with a display resolution of 0.1 g; its verified scale interval is 1 g, making it suitable for many legal-for-trade tasks. Is the load cell protected against dust and splashes? Yes. The unit uses a silicone-coated aluminium load cell with IP65 protection to resist dust ingress and splashing in workshop environments. Can the platform be used for legal verification and calibration? The platform carries OIML R60 approval and meets Class III, 3000 e standards, enabling official calibration and use in verified weighing applications when required. What footprint and installation aids does the platform offer? The weighing surface measures 230×230 mm and the overall module height is 230×230×110 mm; a levelling bubble and adjustable feet are supplied for precise setup. Which materials and environments is this platform suited to? Constructed with a stainless-steel weighing plate and painted-steel underframe, the platform is intended for workshop, small-series production and laboratory sampling where durability and traceability matter. KERN; Address: not specified; Contact: not specified
3 kg Precision Industrial Scale Heavy-Duty, 52 mm LCD Readout, IP65 - KERN
Benefit from high-precision readability, robust heavy-duty construction and full IP65 protection for reliable workshop weighing; order the industrial balance directly via Metav Werkzeuge or ask our consultants if needed. Industrial balance IFB.6K-3SM – heavy-duty, IP65-protected weighing system by KERN The Industrial balance IFB.6K-3SM is a heavy-duty industrial weighing instrument with calibration approval, intended for precise weighing, parts counting and quality assurance tasks in production and laboratory-adjacent workshop environments. Heavy-duty design with calibration approval IP65 dust and water protection Stainless steel 230×230 mm weighing plate Large 52 mm LCD digits for clear readouts Repeatable precision that supports quality control The core advantage of this instrument is its reproducible accuracy: with a readability of 1 g / 2 g and reproducibility values down to 0.001 kg / 0.002 kg, the unit delivers consistent results for process control and inspection tasks. The strain-gauge system converts load to an electrical signal with minimal drift, enabling reliable statistical control in batch processes. Minimum net weights of 0.02 kg / 0.04 kg and a smallest part weight for counting of 200 mg make the device suitable for both bulk weighing and fine counting applications, reducing rework and error rates on the shop floor. Built for demanding environments and continuous use Robust construction ensures long service life: the housing combines durable plastic with a stainless steel weighing plate sized 230×230 mm, providing a flat, corrosion-resistant surface for frequent loading. With an IP65 rating the assembly is protected against dust ingress and water jets, permitting operation in humid or dusty production areas. The permitted operating range of -10 °C to 40 °C and maximum ambient humidity of 80% support stable performance in typical industrial settings, while the total instrument weight of 4.6 kg balances portability and solidity for bench or trolley use. Clear, legally compliant readouts that speed decisions Large 52 mm LCD digits ensure fast visual checks across the workbench, reducing handling time and misreads in busy operations. The device is supplied in a type approved configuration, indicating calibration approval for legal-for-trade or regulated measurements where required. Available nominal capacities of 3 kg and 6 kg cover a wide range of small- to medium-load applications without sacrificing precision. By combining visible, unambiguous displays with certified weighing accuracy, the balance reduces decision latency for quality inspectors and operators alike. Practical power and operating features for workshop routines Power is supplied by the included mains adapter compatible with 100–240 V, 50/60 Hz, and an internal battery option is supported with a typical charging time of 12 h, enabling flexible station setups. The compact footprint and rectangular weighing surface aid handling of irregular or multiple items, while the strain-gauge load cell design minimises maintenance needs. For procurement and traceability, the unit is identified by SKU IFB.6K-3SM and GTIN 4045761244054, ensuring straightforward replacement and inventory control. For dependable, legally compliant weighing choose the KERN IFB.6K-3SM — contact Metav Werkzeuge in Emmerich for tailored advice by email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: TIFB-A SKU: IFB.6K-3SM GTIN: 4045761244054 Manufacturer: KERN Key figures Capacity: 3 kg; 6 kg Readability: 1 g; 2 g Reproducibility: 0.001 kg; 0.002 kg Minimum weight (min): 0.02 kg; 0.04 kg Smallest part weight for counting: 200 mg Display digit height: 52 mm Operating temperature: -10 °C to 40 °C Max ambient humidity: 80% Instrument weight: 4.6 kg Power input: 100 V - 240 V, 50 / 60 Hz Battery charging time: 12 h Materials & special features Housing material: plastic Weighing plate: stainless steel Protection rating: IP65 Weighing system: strain-gauge (Dehnungsmessstreifen) Weighing surface (rectangular): 230×230 mm Origin: CN Tariff code: 84238129 FAQ What does calibration approval mean for this balance? Calibration approval means the IFB.6K-3SM by KERN is supplied in a configuration that meets legal requirements for trade or regulated measurements, enabling documented, traceable weighing results. Can the balance be used in damp or dusty production areas? Yes. The IP65 rating and stainless steel weighing plate allow the balance to operate reliably in dusty or moisture-prone environments typical of many workshops. Which weighing ranges and resolutions are available? The device is offered with capacities of 3 kg and 6 kg, with readabilities of 1 g and 2 g respectively, and reproducibility values down to 0.001 kg / 0.002 kg for precise, repeatable measurements. Is the display legible from a distance during busy operations? The large 52 mm LCD digits provide high-contrast, easily readable values to speed checks on the workbench and reduce handling time. Does the balance support parts counting for small components? Yes. The IFB.6K-3SM supports counting tasks with a smallest reference part weight of 200 mg, making it suitable for component batching and inventory tasks. KERN • Origin: China • GTIN: 4045761244054
3 kg Precision Platform Scale Stainless Steel Pan, IP65, Multi-Interface Options - KERN
Combine high-precision readability, robust IP65 protection and versatile data connectivity for consistent results across laboratory, production and logistics environments. Order the KERN IOC 6K-3M via Metav Werkzeuge or request tailored advice from our consultants for the ideal configuration. KERN IOC 6K-3M – Industrial platform scale with RS-232 and IP65 stainless-steel platform The KERN IOC 6K-3M is a compact industrial platform scale designed for precision weighing, piece counting and seamless data transfer across production, quality assurance and logistics environments Stainless-steel 300×300 mm platform Readability 0.001 kg / 0.002 kg Dust and splash protection IP65 KCP compatible via RS-232 interface Reliable connectivity that speeds up data workflows The scale offers comprehensive digital integration so that measured values are transferred quickly and reliably. Equipped with a standard RS-232 interface and compatible with the KERN Communication Protocol (KCP), the instrument can be linked to PCs, printers, PLCs and mobile devices for automated logging and control. For operations requiring regulatory traceability, the communication options support centralised data capture and export to software such as KERN EasyTouch, reducing manual entry errors and accelerating process flows. Precision and mobility to support varied workstations Compact dimensions and stable construction make the platform suitable for multiple areas: laboratory benches, packing stations and production lines. The stainless-steel weighing plate on a silicone-coated aluminium load cell delivers durable performance and simple cleaning, while automatic multi-range switching maintains high resolution across the scale’s capacities. With optional internal battery operation (up to 100 h runtime, 3 h charge) and included levelling aids, the unit combines portability with industrial-grade accuracy for repeatable results in variable environments. Compliance and operational resilience for daily use Designed for professional use, the instrument meets requirements for legal-for-trade applications when ordered with official calibration (conformity assessment under NAWI 2014/31/EU). A connected, legally calibrated unit that transmits data externally requires an alibi memory (KIB-A13). Built-in protections such as IP65 dust and splash resistance, clear 25 mm high digits on the LCD and robust reproducibility and linearity specifications ensure dependable readings under routine conditions, supporting quality control and stock management tasks. Contact Metav Werkzeuge today for configuration and ordering options for the KERN IOC 6K-3M; our Emmerich-based team will advise on calibration, interfaces and suitable accessories to match the application Technical Data Article number: IOC.6K-3M Manufacturer: KERN GTIN: 4045761207240 Product: Platform scale Origin: CN Facts Weighing range: 3 kg / 6 kg Readability (d): 0.001 kg; 0.002 kg Display digit height: 25 mm Platform dimensions (plate): 300×300 mm Platform overall dimensions: 300×300×110 mm Weight: 5.8 kg Battery runtime: 100 h Battery charge time: 3 h Operating temperature: -10 °C to 40 °C Max ambient humidity: 80% IP protection: IP65 Linearity: ± 0.003 kg; 0.006 kg Reproducibility: 0.001 kg; 0.002 kg Smallest piece weight (lab): 250 mg Smallest piece weight (normal): 2.5 g Minimum weight: 0.02 kg; 0.04 kg Power supply: 100 V–240 V AC 50/60 Hz, 0.4 A max Customs tariff code: 84238129 ECLASS: 27320101 Special features Stainless-steel weighing plate Plastic housing Silicone-coated aluminium load cell Multi-range automatic switching KERN Communication Protocol (KCP) compatibility RS-232 standard interface; further interfaces on request Optional internal battery (portable use) Levelling bubble and adjustable feet included Compatible with KERN EasyTouch software Optional legal calibration (NAWI 2014/31/EU); full installation address required Alibi memory requirement (KIB-A13) for externally transmitted data Suitable for warehouse logistics, dispatch and piece counting FAQ Is the scale suitable for legal-for-trade applications? Yes. The KERN IOC 6K-3M can be supplied with an official calibration (conformity assessment under NAWI 2014/31/EU); the full installation address must be provided at order and a subsequent initial verification is not possible. Which interfaces are available for automated data capture? The instrument supports a standard RS-232 interface and is compatible with the KERN Communication Protocol (KCP), enabling integration with PCs, printers and industrial controllers; additional interfaces are available on request. Can the balance be used at multiple workstations without mains power? Yes. The platform balance offers an optional internal battery with up to 100 h runtime and a 3 h charge time, enabling mobile use across laboratory, production and packing areas. What accuracy and ranges are provided for precision tasks? The device offers readabilities of 0.001 kg and 0.002 kg with capacities of 3 kg and 6 kg respectively, automatic multi-range switching, and documented reproducibility and linearity suited to precision weighing and piece counting. Is the platform resistant to dust and splashes and easy to maintain? The stainless-steel weighing plate combined with IP65 dust and splash protection ensures simple cleaning and reliable operation in environments where moisture or fine particles are present. KERN — Origin: China. Distributor contact: Metav Werkzeuge, Emmerich | eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271
3 kg Precision Price-Computing Retail Scale 0.001 g/0.002 g Readability, Triple Display, Stainless Steel Pan - KERN
Take advantage of a robust, retail-ready solution that combines precise weight and price calculation with a large article memory and durable hygienic design. Benefit from quick transactions thanks to direct-price keys and a clear multi-display layout; order the unit through Metav Werkzeuge or contact our consultants for assistance with legal calibration and tailored delivery. KERN RIB 6K-3M — Price-computing retail scale with dual-range accuracy The KERN RIB 6K-3M is a compact price-calculating shop scale engineered for retail, market stalls and small production lines, offering reliable weight-to-price conversion and straightforward operation Three displays for weight, unit price and selling price Large article memory for repeated items 10 direct-price keys for rapid service Water-resistant housing with drainage channels Protective work cover included Faster sales through accurate price calculation and range adaptation The price-computing concept speeds up checkout by displaying weight, unit price and total price across dedicated displays, reducing input errors and transaction time. The scale supports dual weighing ranges (3 kg / 6 kg) with fine readabilities (0.001 kg / 0.002 kg) and an automatic multi-range function that switches to the next range as load increases. Such technical characteristics translate into fewer re-weighs and consistent pricing, which contributes directly to operational efficiency and lower training overhead in busy retail environments. Hygienic construction and durable materials for daily commercial use A stainless steel weighing plate paired with a plastic housing creates a surface that is easy to clean and resistant to typical shop contaminants. The casing features dedicated drainage channels and sealing rings to help keep ingress away from sensitive electronics, supporting a water-resistant design philosophy that prolongs service life. A protective cover is supplied with the unit to shield controls during storage or in dusty conditions, reducing maintenance intervals and protecting investment in high-use locations. Intuitive interface designed to reduce transaction time The instrument integrates three displays, including a rear customer display, so both operator and buyer can follow the transaction simultaneously—this transparency builds trust and speeds service. A set of 10 direct-price keys and an extensive large article memory allow frequent articles to be recalled instantly, cutting keystrokes per sale. Built-in energy management switches the backlight off after a short interval to conserve power without compromising readability during active use. Included international adapters (CH / EURO / UK) ensure compatibility with common mains sockets. Compliant setup and versatile application across retail sectors Designed for a wide range of environments—retail, food sales, market stalls and light packaging—the scale supports market-specific workflows and can be used where legal verification is required. Legal calibration is available and must be ordered separately in line with NAWI 2014/31/EU requirements; please provide the full installation address when requesting conformity assessment. With consistent linearity and reproducibility figures, the instrument offers dependable results that align with statutory and commercial quality expectations. Contact Metav Werkzeuge in Emmerich to arrange delivery of the KERN RIB 6K-3M, request optional legal calibration or obtain tailored advice for your point-of-sale setup Technical Data Article number: RIB.6K-3M Manufacturer: KERN GTIN: 4045761180819 Country of origin: CN Facts Weighing ranges: 3 kg / 6 kg Readability / verification values: 0.001 kg; 0.002 kg Linearity: ± 0.001 kg; 0.002 kg Reproducibility: 0.001 kg; 0.002 kg Minimum weight: 0.02 kg; 0.04 kg Display digit height: 18 mm Platform (WxD): 294 × 225 mm Housing dimensions: 325 × 340 × 115 mm Net weight: 3.2 kg Power input: 100 V–240 V AC, 50/60 Hz, 0.4 A max Operating temperature: −10 °C to 40 °C Max ambient humidity: 80 % Verification class: III Tariff heading: 84238125 Special features Material: plastic housing, stainless steel weighing plate Weighing system: strain gauge (load cell) Three displays including customer display at rear 10 direct-price keys and large article memory Energy management with backlight auto-off Drainage channels and sealing rings for dirt rejection Protective work cover included Mains adapters included: CH / EURO / UK Multi-range automatic switching between ranges Optional legal calibration (order separately; provide full installation address) FAQ What weighing ranges and accuracies are supported? The scale offers dual ranges of 3 kg and 6 kg with readabilities of 0.001 kg and 0.002 kg respectively; these values define the resolution and verification steps for the KERN RIB 6K-3M retail scale. Is the unit suitable for food retail and market use? Yes—construction with a stainless steel weighing plate and dirt-rejecting drainage channels makes the device well suited for food sales, market stalls and other retail environments where hygiene and easy cleaning are priorities. Can the scale be legally verified for commercial transactions? Legal calibration can be performed; the KERN RIB 6K-3M requires separate ordering of verification in compliance with NAWI 2014/31/EU. The complete installation address is needed when placing a calibration order. How does the memory and pricing interface support busy operations? The instrument includes a large article memory and 10 direct-price keys that enable rapid recall of frequent items and direct price entry, significantly reducing transaction times at the point of sale. Which power options and plugs are included? A universal mains adapter is supplied with CH, EURO and UK plug variations to ensure compatibility with local sockets; the unit is rated for 100 V–240 V AC input. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271
Maximise accuracy and uptime with industrial scales
Industrial scales are the robust backbone for precise, efficient and process-safe weight determination across production, logistics, warehousing and retail. Designed for heavy-duty use, these weighing systems combine mechanically sturdy construction with modern electronics to deliver repeatable results even under harsh conditions.
How weighing systems perform in industrial settings
The most resilient weighing equipment uses weighbridges and load cells manufactured from torsion-resistant steel or corrosion-resistant stainless steel, and is protected by high IP ratings against dust and strong jets of water. Modern indicators and external evaluators make the systems intuitive to operate and allow measured values to be transferred in real time to higher-level systems for automated material flow.
Practical benefits for production and logistics
- consistent, high-precision measurement under heavy loads, reducing rework and material waste
- seamless data transfer to ERP or PLC systems via USB, WLAN, RS-232 and Ethernet, speeding up process integration
- reduced handling time through drive-over floor scales, pallet scales and mobile weighing trucks
- hygienic designs (HACCP-suitable) for food-industry environments, easing cleaning routines
- configurable functions such as recipe weighing and counting for faster inventory and batch control
technical data at a glance
- materials: torsion-resistant steel; corrosion-resistant stainless steel
- protection: high IP protection classes
- components: weighbridges; load cells; evaluators/indicators
- connectivity: USB; WLAN; RS-232; Ethernet
- functions: recipe weighing; counting; price calculation (retail); HACCP suitability
- types: table scales; platform scales; drive-over floor scales; pallet scales; mobile weighing trucks; hanging and crane scales
trusted manufacturers and a pragmatic supply partner
KERN & SOHN stands out as a premium choice for precision weighing, combining decades of specialised craftsmanship with a broad portfolio of high-quality measuring instruments. Metav complements this by democratising precision: a quality filter based in Emmerich, trusted by over 48,000 customers, offering more than 250,000 products and reliable order fulfilment for industry and trade. This partnership ensures access to both specialist knowledge and a comprehensive range of weighing equipment.
FAQ
What are test weights and why are they used?
Test weights are defined masses with fixed nominal values used to check, adjust or document the accuracy of industrial scales. They support both calibration and routine quality assurance.
Which accuracy classes exist for test weights?
Test weights are classified by accuracy, typically E1, E2, F1, F2 and M1–M3. Higher classes permit smaller deviations and are used where traceable precision is required.
Which test weights do I need for my scale?
The choice depends on the weighing range, readability and application. For routine checks, a weight within the typical working range suffices; for stricter control, sets covering multiple points across the range are recommended.
What is the difference between calibrating and adjusting with test weights?
Calibrating documents how much the indicated value deviates from the nominal value; adjusting (justieren) alters the scale so it reads correctly. Both processes commonly use test weights but serve different goals.
How should test weights be handled and stored?
Handle test weights with tweezers or clean gloves to avoid contamination. Store them in a protective case to prevent dust, corrosion or damage and to keep each weight in its designated place.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com