20 kg Stainless Steel Platform Scale IP65/IP67, 2 g Readability, Rechargeable Battery, 52 mm LCD - KERN

Take advantage of a lightweight, workshop-ready stand that raises the weighing indicator for clearer readings and flexible installation; compatible with a wide range of KERN scale models and ready to order via Metav Werkzeuge or discussed with our consultants for application advice. KERN BFS-A07 stand — Indicator-unit stand, KERN-compatible The BFS-A07 stand is a compact mounting solution designed to raise weighing indicator units for industrial and workshop scales, making displays easier to read and integrating cleanly with existing KERN equipment. Compact stand for raising indicator units Compatible with KERN UFA, BFB, BFN and BFS Also fits KERN pallet and through-rail scales Lightweight construction approx 2.6 kg Clear readings and dependable positioning for weighing tasks The stand offers stable positioning for indicator units, which improves readability and reduces handling errors during routine weighing operations. Built as a dedicated accessory for scales, this mounting solution ensures the indicator is elevated away from the weighing platform, helping to prevent signal interference and making the display accessible from a comfortable viewing angle. The combination of a compact footprint and robust support simplifies integration into production lines and workshop benches, delivering practical benefits without complex modifications. Practical workshop integration and ergonomic benefit With a focus on convenience, the support stand reduces clutter on the work surface and provides an ergonomic viewing height for operators handling frequent weighings. The lightweight construction allows for repositioning when workflows change, while the compact design maintains a minimal footprint in tight areas. Installation is straightforward when used with the compatible KERN equipment named below, enabling quick set-up in dispatch, goods-inwards or production cells where clear indicator visibility speeds up processes and reduces downtime. Clear compatibility to match existing KERN systems The stand is intended specifically as an accessory for KERN weighing systems, offering compatibility with a range of models so that workshops can standardise on a single mounting solution. By matching the stand to compatible weighing beams, floor scales and pallet models, users gain a consistent mounting approach across different scale types. This targeted compatibility minimises uncertainty when specifying accessories and supports a streamlined workflow in industrial weighing applications. For tailored advice or order placement, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the KERN BFS-A07 stand and its suitability for specific scale setups. Technical data Article number: BFS-A07 Manufacturer: KERN SKU: BFS-A07 GTIN: 4045761111547 Weight: 2.6 kg Origin: CN Facts Weight: 2.6 kg GTIN: 4045761111547 Commodity code: 73269098 ECLASS: 21170601 Compatibility & features Accessory for scales (stands category) For raising weighing indicator / evaluator units Compatible with weighing beams KERN UFA Suitable for floor scales KERN BFB, BFN and BFS Fits pallet scales KERN UFB and UFN and through-rail scale KERN NFB FAQ What scales is this stand compatible with? The stand is compatible with a range of KERN models; compatible types include weighing beams KERN UFA, floor scales KERN BFB/BFN/BFS, pallet scales KERN UFB/UFN and through-rail scale KERN NFB, ensuring broad applicability in industrial weighing setups. Is the stand easy to move around the workshop? Yes. The KERN BFS-A07 stand has a lightweight construction of approximately 2.6 kg, allowing for straightforward repositioning when workflows or station layouts change. What is the primary purpose of the stand? The stand is designed to raise the weighing indicator unit, providing an ergonomic viewing height and reducing interference with the weighing platform for clearer, more reliable readings. Can this stand be used for multiple indicator models? The stand is provided as a universal accessory for the compatible KERN scale families listed above, making it suitable for use with a variety of indicator layouts within those model ranges. Manufacturer: KERN, Origin: CN

Combine compact RS‑232 connectivity, an included 1.5 m interface cable and direct compatibility with KERN floor, platform and pallet scales for reliable data transfer; order the interface directly via Metav Werkzeuge or consult our specialists for configuration advice. KFN-A01 RS-232 data interface – KERN, for floor and pallet scales, includes 1.5 m cable The KFN-A01 RS-232 data interface delivers dependable serial communication for KERN floor scales, stainless-steel platform scales and pallet scales, enabling straightforward transfer of weighing data to terminals or PCs. RS-232 serial interface with cable 1.5 m interface cable supplied Compatible with KERN BFN, SFB and UFN Streamlined data capture for process control The RS‑232 standard remains a robust choice for industrial weighing applications thanks to its simple, well-documented wiring and broad device support. By offering a dedicated serial connection the interface secures fast data capture from scales into data loggers, label printers or legacy terminals without intermediary conversion. For production environments this means fewer protocol issues, reduced integration time and a predictable data flow from the weighing point to backend systems. The clear, unambiguous signal format reduces the need for repeat readings and supports traceable record keeping. Fast installation and assured compatibility The KFN‑A01 arrives with a 1.5 m interface cable ready for immediate connection, minimising setup time on the workshop floor. Intended for KERN models such as BFN (floor scales), SFB (stainless-steel platform) and UFN (pallet scales), the module is supplied as a factory-fit option and is not retrofittable, so planning for initial integration is advised. The compact module and supplied lead support neat cable routing and straightforward mounting, helping to avoid common installation delays and maintain the uptime of weighing processes. Reliable workflow and supply assurance Compact in design and light in weight, the interface contributes to a tidy installation that integrates with production routines and measurement systems. Choosing accessories from established brands and a trusted distributor reduces procurement risk: Metav combines decades of precision expertise with central supply from Emmerich, a broad product range and consistent stock handling. This supplier reliability supports uninterrupted operations and aligns with quality-driven purchasing policies in industry and trade. For fast supply and expert advice on the KFN-A01 RS-232 data interface, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: KFN-A01 Manufacturer: KERN SKU: KFN Facts Weight: 0.15 kg Cable length: 1.5 m Special features Interface: RS-232 Compatible with: KERN BFN, KERN SFB, KERN UFN Not retrofittable Supplied: interface cable 1.5 m FAQ What types of scales is the interface compatible with? The KFN-A01 RS-232 data interface is compatible with KERN floor scales (BFN), stainless-steel platform scales (SFB) and pallet scales (UFN). Is the interface supplied with a cable? Yes, the product is supplied with an included interface cable of 1.5 m length for immediate connection. Can the RS‑232 interface be retrofitted to existing scales? The interface is specified as not retrofittable; it is intended for original-fit installation on the compatible KERN models. Which data destinations can receive signals from this interface? The RS‑232 output is suited to PCs, terminals, label printers and data loggers that accept serial input in standard ASCII or configured protocols. How heavy is the module and how does that affect installation? The module has a weight of 0.15 kg, allowing discreet mounting with minimal impact on scale handling and cabling. Manufacturer: KERN · Metav Werkzeuge, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930

Benefit from a stainless-steel, hygienic design combined with low weight and straightforward handling for fast, reliable weighing of loose goods; order the tare pan directly via Metav Werkzeuge or ask our consultants if needed. KERN Tare Pan RFS-A02 — stainless-steel weighing tray for loose items KERN Tare Pan RFS-A02 provides a purpose-built stainless-steel surface for quick, hygienic weighing of loose small parts, fruit and vegetables with compatible bench and laboratory scales. Stainless-steel construction, easy to clean Lightweight and easy handling Designed for loose small parts and produce Accessory for KERN scales and similar systems Faster, more reliable weighing for daily workflows The stainless-steel tray is designed to support efficient weighing tasks in production, retail and workshop environments. Thanks to its hygienic surface and smooth geometry, routine cleaning is quick, reducing machine downtime and maintaining consistent results. The material choice also contributes to weighing accuracy by preventing contamination and reducing offsets that arise from trapped debris. This results in a predictable tare behaviour and fewer repeat measurements, improving throughput on busy benches. Practical handling and compatibility with scale systems This accessory is optimised for integration with bench and counting scales, offering a simple way to extend existing weighing equipment for bulk or loose items. The lightweight construction eases placement and removal, while the shallow profile supports even distribution of small components for stable readings. For workshops and retail counters where speed and repeatability matter, the tray streamlines processes and supports consistent inventory recording. Low-maintenance hygiene for food and small-parts environments Constructed for straightforward maintenance, the tray’s stainless-steel surface is easy to clean and resistant to staining, which is especially beneficial when handling foodstuffs or dusty small parts. The material minimises bacterial harbourage when cleaned correctly and reduces the need for intensive maintenance regimes. Visual inspection is fast, and routine wiping keeps the weighing environment compliant with basic hygiene expectations without specialised tools. For procurement, compatibility checks or technical advice on the KERN tare pan RFS-A02, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — phone and WhatsApp support available for quick consultation Technical Data Article number: RFS-ACC SKU: RFS-A02 Manufacturer: KERN GTIN: 4045761113787 Net weight: 0.57 kg Origin: CN Customs tariff number: 84239010 eClass: 32040606 Facts Net weight 0.57 kg GTIN 4045761113787 Customs tariff 84239010 eClass 32040606 Special features Stainless-steel tray, easy and hygienic to clean Ideal for weighing loose small parts, fruit, vegetables Accessory for scales, product category: weighing accessories FAQ Is the tray suitable for food use? The stainless-steel surface of the KERN tare pan RFS-A02 is described as easy to clean and hygienic, making it suitable for weighing fruit and vegetables under routine cleaning regimes. Which scales is the tray compatible with? The tray is an accessory for bench and counting scales; it is supplied as the tare pan RFS-A02 for KERN systems and can be used with similar platforms that accept removable trays. How should the tray be cleaned to maintain accuracy? Routine wiping with a mild detergent and drying is recommended to keep the weighing surface free of residues that could affect tare values; the KERN tray’s stainless-steel finish supports straightforward maintenance. What is the net weight of the tray and does it affect scale selection? The tare pan has a net weight of 0.57 kg; this should be considered when selecting a scale with an appropriate capacity and resolution for your weighing tasks. KERN — Manufacturer country: CN

Summary and Technical Data for KERN Y-Schnittstellenkabel :Manufacturer: KERNSeries: CFSModel: Y-SchnittstellenkabelOrder your new Y-Schnittstellenkabel now Online!

Take advantage of the combination of KERN reliability, rapid dispatch and straightforward integration with weighing systems for uninterrupted measurement workflows; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Analogue Module KFB-A04 – KERN accessory for scales with reliable signal conversion The Analogue Module is a compact accessory designed for integration with weighing equipment, converting and routing analogue signals for measurement and logging applications. Rapid dispatch from Emmerich warehouse Compatible with standard weighing systems Manufactured by KERN for measurement reliability Compact module for analogue signal integration Seamless integration for measurement workflows The analogue module provides a direct route to add analogue outputs to weighing installations, enabling straightforward connection to indicators, data loggers or control systems. Engineered by KERN, the unit focuses on signal conversion and stable transmission, reducing the need for additional interface hardware. For workshops and small production lines this means fewer connection errors and lower setup time, which supports more efficient daily operation without complex configuration. Clear advantages for procurement and logistics Supplied with fast dispatch from our Emmerich centre, the unit shortens lead times and simplifies replenishment planning. Metav Werkzeuge acts as a reliable logistics partner and quality filter for the European market, consolidating supply needs and offering a wide range of measurement accessories. The compact format supports storage efficiency and rapid deployment across multiple workstations, helping to keep production continuity where measurement reliability matters most. Practical technical benefits explained The module handles analogue signal transmission and can be used where a continuous voltage or current output is required for external devices. In plain terms, the unit translates the scale’s output into a standard signal that is easier to record or process by other equipment. This improves data transfer precision and reduces the likelihood of drift or interference, which is particularly valuable in regulated inspections or batch documentation where consistent measurement traces are required. Reliable partner for long-term precision Built by a recognised manufacturer, the accessory is intended for environments that prioritise measurement stability and repeatability. The design emphasises minimal installation complexity and robust performance under routine use, delivering dependable operation without frequent adjustments. For purchasers seeking to centralise supplies, Metav Werkzeuge’s broad catalogue and experienced consultancy further support long-term equipment planning and system compatibility checks. For procurement assistance or technical clarification on the KERN analogue module (KFB-A04), contact Metav Werkzeuge—technical consultants available via e‑mail, phone or WhatsApp and ready to advise on integration and delivery from Emmerich. Technical data Product name: Analogue Module Manufacturer: KERN SKU: KFB-A04 Model code: KFB ECLASS: 27261604 UID: KFB-A04 Facts Category: Scales accessory Delivery note: rapid dispatch Stock location: Emmerich Special features Function: analogue signal conversion Application area: weighing systems and measurement setups Supplier role: Metav Werkzeuge as distributor and quality filter FAQ What interfaces does the module support and how is it connected? The KERN analogue module (SKU KFB-A04) provides standard analogue outputs for connection to indicators and data loggers; connection details vary by installation and should be confirmed with the Metav Werkzeuge technical team. Is the unit compatible with existing scales from different manufacturers? Compatibility is typical for standard weighing systems; the KERN analogue module has been designed for general use with scales, but Metav Werkzeuge can advise on specific compatibility scenarios. Can the module be used for continuous production data logging? Yes, the unit supports continuous analogue signal transmission suitable for production monitoring and data acquisition when paired with a compatible logger or control system. Who supplies the module within Europe and how quickly is delivery arranged? Metav Werkzeuge supplies the KERN analogue module from its Emmerich facility with fast dispatch; contact details are available for precise delivery timing. Metav Werkzeuge, Emmerich am Rhein, Germany — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271

Take advantage of the precise integration and proven compatibility of this analogue interface from KERN — a compact module that supports seamless connection to industrial weighing systems and aids consistent measurement workflows. Order the module directly via Metav Werkzeuge or consult our specialists for compatibility checks and technical advice. KERN Analogue Module KFB-A05 — analogue interface for scales and weighing systems The KERN Analogue Module KFB-A05 is a compact analogue interface designed to integrate with industrial scales and weighing equipment for reliable signal handling in production and laboratory environments. Analogue interface for scales and weighing systems Compact format for simple integration Manufacturer: KERN quality assurance Suitable for retrofit in weighing installations Reliable signal integration for consistent weighing results The KERN analogue module serves as an interface that channels analogue outputs from weighing instruments into connected control or display units, helping to maintain signal integrity across production processes. By providing a stable analogue path, the module supports repeatable measurement chains and reduces the need for repeated calibration cycles. This contributes to predictable process control and helps avoid unnecessary stoppages in measurement-critical workflows. Built for straightforward installation and retrofit efficiency A compact design allows the module to be mounted into existing enclosures or integrated during routine equipment upgrades, simplifying installation and minimising downtime. Clear labelling and a concise connection scheme reduce wiring complexity, enabling technicians to complete retrofits more quickly and with fewer errors. The result is faster commissioning of weighing electronics and a shorter route back to full production capacity. Dependable operation that supports production quality Engineered with industrial metrology in mind, the interface focuses on delivering stable analogue outputs that preserve the fidelity of the original weighing signal. This emphasis on reliability supports quality assurance processes by ensuring measurements remain consistent over time. Where consistent readouts are a prerequisite for decision-making, the module helps to safeguard process outcomes and maintain traceable measurement records. Documentation and professional support for installation decisions Technical documentation accompanies the module, detailing connection schemes and typical application scenarios for scales and weighing systems. For organisations requiring compatibility checks or integration advice, Metav Werkzeuge provides expert guidance grounded in decades of metrology experience. This assistance complements the module’s technical data and helps to align the product with specific production or laboratory requirements. For precise integration of weighing electronics, contact Metav Werkzeuge in Emmerich am Rhein for tailored advice and ordering — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: KFB-A05 Manufacturer: KERN Model name: Analogue module ECLASS: 27261604 Numbers / Facts SKU: KFB-A05 Art.-nr.: KFB Special features / Versions Analogue interface for scales Intended for integration with weighing systems Compact format suitable for retrofit FAQ What is the primary function of this analogue module? The analogue module KFB-A05 from KERN provides an analogue interface for scales and weighing systems, enabling stable signal transfer to displays or control units. Can the module be retrofitted into existing weighing installations? Yes. The design of the KFB-A05 supports retrofit installation and is intended for straightforward integration into already-installed weighing equipment. Does the module include documentation for wiring and connection? Documentation for connection schemes and typical applications is provided with the KERN analogue module KFB-A05 to assist technicians during installation. Is the KFB-A05 suitable for laboratory and industrial weighing applications? The module is intended for use with industrial and laboratory scales where analogue signal transmission and consistent measurement integrity are required. Metav Werkzeuge, Emmerich am Rhein, Germany — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930

Combining OIML Class M1 accuracy with a robust painted cast‑iron construction, the 10 kg block delivers dependable calibration performance and straightforward handling for routine verification tasks. Order the KERN ECO block weight directly via Metav Werkzeuge or consult our specialists for procurement and application guidance. KERN ECO block weight 346-77 — 10 kg, OIML Class M1 The ECO block weight is a cast‑iron test weight for calibration and verification of industrial and laboratory scales, optimised for routine use and stable results. OIML Class M1 accuracy 10 kg nominal mass Painted cast-iron construction Compact block format for stable handling High-precision calibration for routine checks The block is specified to OIML Class M1, with a tolerance of 500 mg (0.5 g) at the declared nominal mass, which supports reliable calibration and conformity checks on a wide range of weighing instruments. This classification indicates traceable accuracy suitable for many industrial, trade and laboratory applications where repeatable measurement and documented tolerances are required. Using a defined calibration mass reduces downtime for checks and helps maintain consistent process control. Durable design that simplifies handling and storage Constructed from painted cast iron, the mass combines corrosion protection with a solid feel that resists wear from daily handling. The compact block shape provides a stable contact area and is easier to place on small pans or platforms than tall, slender weights. Fewer handling adjustments reduce the risk of incidental damage and help technicians complete verification routines more quickly, improving throughput in busy metrology rooms or workshops. Compliance, traceability and practical particulars The calibration mass is delivered as a single test weight with a clear nominal value of 10 kg and a clearly specified accuracy class, enabling straightforward documentation for internal quality records. The block format is especially practical for routine verifications where fast placement and removal are priorities. For ordering and inventory, the article is listed under SKU 346-77 and bears GTIN 4045761241688, aiding stock control and traceability in procurement processes. For procurement or technical advice on the KERN ECO block weight, contact Metav Werkzeuge in Emmerich for transparent delivery and expert guidance. Technical Data Article number: 346-77 Manufacturer: KERN SKU: 346-77 GTIN: 4045761241688 Country of origin: CN Facts Nominal mass: 10 kg OIML class: M1 Tolerance: 500 mg Commodity code: 84239090 Special features Painted cast-iron material Block format for stable placement Single calibration mass Intended for scale calibration and verification FAQ What level of accuracy does this calibration mass provide? The ECO block weight (KERN, SKU 346-77) conforms to OIML Class M1 with a stated tolerance of 500 mg, providing stable, traceable accuracy for routine calibration and verification tasks. Is the mass suitable for regular workshop use? Yes, the painted cast‑iron construction of the ECO block weight is designed for everyday handling and offers a durable surface that eases routine verification cycles. Can this weight be used for legal-for-trade applications? The OIML Class M1 designation indicates suitability for many industrial and laboratory applications; however, legal-for-trade requirements depend on local regulations and the specific application. How does the block format benefit handling compared with cylindrical weights? The compact block design gives a low centre of gravity and a broad, stable contact area, making placement quicker and reducing the risk of tipping or damage during frequent use. KERN; Origin: CN; GTIN: 4045761241688

Take advantage of the combination of certified accuracy, robust coated cast-iron construction and straightforward handling to maintain reliable measurement routines. Order the calibration weight directly via Metav Werkzeuge or consult our specialists for application advice and delivery from Emmerich. ECO Block Calibration Weight, Class M1 — KERN (20 kg, coated cast iron) The ECO Block Calibration Weight is a 20 kg, OIML Class M1 block designed for routine calibration of industrial and laboratory scales, offering a compact, durable reference for workshops and quality departments. OIML Class M1 certified 20 kg nominal value Coated cast-iron construction Compact block design Reliable reference for regular scale checks The ECO Block Calibration Weight provides a stable, certified mass reference for frequent verification of weighing equipment. With OIML M1 classification and a tolerance of 1 g, it supports conformity checks on bench and floor scales used in production, goods reception and quality control. The block format simplifies placement and handling while the nominal 20 kg value covers common calibration points in industrial metrology. This facilitates consistent results and reduces downtime through quick on-site verification procedures. Robust construction with practical benefits Manufactured from coated cast iron, the weight combines mechanical robustness with surface protection to limit corrosion and surface wear. The block design minimises rolling and improves stability on scale pans, translating into safer handling and fewer position-related measurement errors. For technical teams with limited metrology resources, this construction delivers cost-effective longevity: the protective coating reduces maintenance frequency while preserving accuracy across routine uses. Traceability, documentation and operational fit As a certified M1-class reference, the unit supports traceability chains when used alongside documented calibration routines; the recorded 1 g tolerance aids decision-making about recalibration intervals and permissible deviations. The compact reference is well suited for workshops seeking a pragmatic balance between precision and everyday robustness. Metav Werkzeuge’s position as a quality filter for the European market ensures dependable stock and clear procurement channels from Emmerich to the workbench. For assured accuracy from a recognised manufacturer, request this KERN ECO block calibration weight via Metav Werkzeuge or contact our Emmerich team for detailed application guidance and supply options Technical Data Article number: 346-78 Manufacturer: KERN GTIN: 4045761241695 Origin: CN Specifications Nominal value: 20 kg Tolerance: 1 g OIML class: M1 HS code: 84239090 Features Coated cast iron construction (Gusseisen lackiert) Block Eco design Single calibration weight SKU: 346-78 FAQ What does OIML Class M1 mean for everyday calibration? OIML Class M1 denotes a recognised international accuracy class; the KERN ECO block weight meets this class and is suitable for routine checks where M1 tolerance is required. How precise is the 20 kg reference weight? Precision is defined by the tolerance of 1 g for this 20 kg nominal value, which guides acceptable deviation thresholds during verification procedures. Is the block suitable for use in busy workshop environments? Yes, the coated cast-iron construction and block format are designed for regular handling and offer enhanced durability for workshop conditions. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930 — WhatsApp +49 170 2837271

Reliable RS-232 data transfer combined with a 1.5 m cable length and a compact weight of 0.07 kg enables straightforward integration into existing workshop and laboratory setups; Order the CFS-A01 directly via Metav Werkzeuge or ask our consultants if needed CFS-A01 RS-232 interface cable by KERN — 1.5 m, lightweight A CFS-A01 RS-232 interface cable for linking precision scales and terminals to data acquisition systems, designed for reliable serial communication in industrial and workshop environments RS-232 interface for stable data transfer 1.5 m length for flexible device placement Compatible with KERN scales and terminals Lightweight 0.07 kg for easy handling Stable serial connection for precise measurement transfer The RS-232 protocol remains a standard for reliable, real-time data transmission in metrology and weighing applications. This serial lead ensures consistent data flow from measuring instruments to terminals or PCs, reducing the risk of transmission errors that can affect traceability. Built for industrial use, the cable supports common serial communication requirements and simplifies integration into existing measurement chains. The minimal signal loss and shielding typical of RS-232 connections help maintain measurement integrity during logging or process control. Flexible installation that suits bench and test environments With a 1.5 m length the lead offers practical reach between bench-top scales and nearby data collection hardware without excess cable clutter. The cable’s moderate span enables tidy routing behind workstations and straightforward placement in racks or carrying cases. Its design supports rapid reconnection and reduces setup time during shift changes or when moving devices between test stations, contributing to improved uptime and a smoother workflow in production and laboratory contexts. Compact handling and dependable supply chain quality The cable’s lightweight build (0.07 kg) makes handling and storage effortless, while still meeting the robustness expected for workshop accessories. As part of Metav’s curated offering, this accessory is supplied with a consistent quality filter from Emmerich, ensuring reliable availability for industry users. The combination of compact dimensions and dependable manufacture reduces logistical friction and supports uninterrupted measurement routines on the shop floor. Contact Metav Werkzeuge for purchasing or specialist advice on integrating the CFS-A01 into existing measurement systems — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CFS-A01 Manufacturer: KERN GTIN: 4045761245198 Country of origin: CN Measurements / Core data Cable length: 1.5 m Weight: 0.07 kg Special features Interface: RS-232 Category: Scales → Accessories Intended use: Connection of scales and terminals for data transfer FAQ What interface does the cable use? The CFS-A01 uses an RS-232 serial interface for stable, real-time data transfer between scales and downstream devices. What is the usable cable length? The cable provides a fixed length of 1.5 m, offering practical reach for bench and workstation arrangements. Is the cable compatible with KERN weighing instruments? Yes, the lead is specified for use with KERN scales and terminals and is intended for direct serial connections where RS-232 is supported. How heavy is the cable and how does that affect handling? Weighing 0.07 kg, the lead is lightweight and easy to route, store and reconnect without adding significant bulk to instrument setups. Can the cable be used with modern PCs without a serial port? The CFS-A01 communicates via RS-232; for PCs lacking a serial port, a USB-to-RS232 adapter can be used to bridge the connection. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930

Take advantage of a compact, reliable stand that raises the indicator by 200 mm for improved readability and ergonomic operation; its compatibility with IP-protected KERN SFE platform scales and lightweight construction (approx. 0.59 kg) make it a practical choice for workshop integration — order the stand directly via Metav Werkzeuge or consult our specialists for application advice. Stativ SFE-A01 – Stand for KERN SFE, 200 mm height, lightweight The Stativ SFE-A01 provides a simple, robust mounting solution for KERN SFE platform weighing systems by elevating the indicator unit to enhance visibility and workflow in workshop and industrial settings. Raises display by approx 200 mm Compatible with IP-protected KERN SFE Suitable for 300×240×110–650×500×140 mm plates Lightweight at approx 0.59 kg Improved readability and operator ergonomics Elevating the indicator by 200 mm removes the need for frequent craning or repositioning of components during weighing tasks. The raised bracket offers a clear line of sight to the display, reducing handling time and the risk of reading errors; this contributes directly to productivity gains in routine checks and repetitive measurements. The compact, elevated mount is especially useful where bench space is limited, delivering a practical combination of visibility and space efficiency. Fast integration into existing KERN setups Designed specifically for use with KERN SFE platform scales, the stand accepts models with weighing-plate dimensions from 300×240×110 mm up to 650×500×140 mm, enabling straightforward retrofitting without major alterations to the workbench. The accessory supports secure mounting of the indicator to maintain stable readings during use, preserving the accuracy of the base scale. Clear compatibility and simple installation translate into less downtime and predictable workflow improvements. Workshop-proven reliability and lightweight handling With a weight of approximately 0.59 kg, the stand is easy to handle during installation and relocation while still providing stable support for the indicator unit. Manufactured for integration with IP-rated platform systems, it assists in maintaining an organised, ergonomic workstation that helps technicians focus on measurement tasks rather than equipment adjustments. For operations seeking dependable components that streamline daily procedures, this stand is a low-effort enhancement that improves usability and efficiency. For precise mounting solutions from a trusted partner, request the KERN SFE-A01 stand through Metav Werkzeuge — our consultants in Emmerich will advise on fitment and delivery to ensure a seamless upgrade to existing weighing equipment. Technical data Article number: SFE-A01 Manufacturer: KERN GTIN: 4045761144781 Origin: CN Tariff code: 73269098 eClass: 21170601 Core technical data Weight: 0.59 kg Height: approx. 200 mm Suitable plate sizes: 300×240×110 mm to 650×500×140 mm Special features Compatible with IP-protected platform scales KERN SFE Stand for elevating the indicator unit Lightweight design for simple handling FAQ Is the stand compatible with KERN SFE platform scales? The stand is compatible with IP-protected KERN SFE platform scales and is intended to elevate the indicator unit for improved visibility. What height does the stand provide? The stand provides an elevation of approximately 200 mm to raise the display into a more ergonomic viewing position. Which weighing-plate sizes are supported? Suitable for models with weighing-plate dimensions from 300×240×110 mm up to 650×500×140 mm. How heavy is the stand? The stand weighs approximately 0.59 kg, making it easy to handle during installation. Where is the stand manufactured? The product originates from China (CN) and is supplied under the KERN designation SFE-A01. Manufacturer: KERN — Origin: China — Contact: info@metav-werkzeuge.com | +49 2822 7131930

Take advantage of the combination of long runtime, rapid recharge and proven KERN compatibility to keep weighing operations uninterrupted. Order the power module directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN GAB-A04 internal battery pack — up to 90 h runtime, approx. 12 h recharge The GAB-A04 is an internal rechargeable battery pack for KERN weighing instruments, designed to deliver extended operation between charges and secure measurement availability in workshop and industrial settings. Internal rechargeable battery operation Up to 90 h runtime (without backlight) Full recharge in approx. 12 h Compatible with KERN scale series Fewer interruptions thanks to extended operation The internal power module provides a long runtime of up to 90 h without backlight, which means extended periods of unattended measurement and less need for mains connection. For production environments and mobile weighing tasks this reduces process interruptions and allows measuring equipment to remain operational during shift changes or temporary site relocations. The specification assumes operation with the display backlight switched off; enabling illumination will reduce the runtime accordingly. Fast recharge to keep workflows moving A complete recharge takes approximately 12 h, allowing predictable scheduling of maintenance windows and ensuring the instrument is ready for the next workday. The charging characteristic supports efficient turnaround between uses, and the unit’s modest mass of 0.74 kg makes replacement and handling straightforward for workshop staff. These attributes contribute directly to higher equipment availability and lower indirect labour costs associated with battery management. Designed for seamless integration with KERN instruments This battery pack is intended as an internal accessory for KERN weighing devices and is supplied as a purpose-built power solution rather than a third-party retrofit. The design focuses on plug-and-play compatibility with the relevant scale range, simplifying installation and avoiding complex conversions. As a dedicated power module it maintains the instrument’s original operation modes and preserves calibration routines, supporting consistent measurement results in daily use. Reliability backed by a trusted distributor network Sourcing the power module through an established partner ensures dependable supply and after-sales continuity. Metav Werkzeuge acts as a quality filter for the European market, combining long-standing expertise with a wide product range to simplify procurement. The combination of component reliability and a dependable logistics partner reduces the risk of downtime and supports uninterrupted measurement capability in industrial and workshop environments. Contact Metav Werkzeuge in Emmerich to secure a KERN GAB-A04 for your scales or request further technical clarification via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: GAB-A04 Manufacturer: KERN GTIN: 4045761126473 Country of origin: CN Facts Weight: 0.74 kg Recharge time: 12 h Battery runtime: up to 90 h (without backlight) Tariff number: 85072080 ECLASS: 21059207 Special features Internal battery operation for scales Lead (Pb) battery chemistry Accessory for weighing equipment Product group: batteries / accumulators Segment: scale accessories FAQ Is the battery compatible with all KERN scales? The battery pack is designed for integration with the relevant KERN weighing instrument series; compatibility should be checked against the instrument model and specifications. How long does a full recharge take? A full recharge requires approximately 12 h under standard charging conditions for the GAB-A04 internal pack. What runtime can be expected in daily use? The specified runtime is up to 90 h without display backlight; using the backlight or additional functions will reduce available operating time. What type of battery is used in this module? The unit uses a lead (Pb) accumulator chemistry, specified for internal operation in compatible KERN instruments. Is the runtime affected by instrument settings? Yes. Features such as display illumination and frequent data transmissions shorten the battery life compared with the quoted figure for non-illuminated operation. KERN · Origin: CN · GTIN: 4045761126473