6 kg / 15 kg Platform Scale Stainless Top Plate, 0.5 g Readability, IP65 Protection - KERN
€315.00
Product information "6 kg / 15 kg Platform Scale Stainless Top Plate, 0.5 g Readability, IP65 Protection - KERN"
Take advantage of the combination of a stainless-steel weighing plate, a silicone-coated aluminium load cell with IP65 protection, and high-resolution 0.5 g readability to secure consistent, legally compliant weighing results in production and inspection workflows. Order the platform directly via Metav Werkzeuge or consult our specialists for integration advice.
KFP 15V20LM weighing bridge (V20/V30) by KERN — stainless-steel plate & IP65 load cell
The KFP 15V20LM is a compact industrial weighing bridge intended as a robust platform for precise small-load weighing in workshops, laboratories and integration into scale assemblies
- Stainless-steel weighing plate
- Silicone-coated aluminium load cell IP65
- OIML R60 approval, Class III, 3000 e
- Readability 0.5 g for precise small loads
Reliable precision for small-load applications
The platform delivers high measurement resolution with a readability of 0.5 g, making it suitable for detailed portioning, component control and quality checks where every fraction of a gram matters. With two selectable weighing ranges (6 kg and 15 kg) and defined calibration divisions, the design reduces rework and supports consistent process decisions by providing repeatable values that integrate directly into documented inspection routines. The finely tuned resolution helps to detect small deviations early, improving overall production yield.
Robust construction tailored to industrial use
A stainless-steel weighing plate combined with a painted steel underframe gives the unit mechanical stability while remaining easy to clean and resistant to workshop environments. The single silicone-coated aluminium load cell is protected to IP65, offering dust and splash resistance that extends service intervals and lowers downtime. Integrated levelling with a visible bubble and adjustable feet enables accurate installation on uneven surfaces, resulting in stable signal output and fewer calibration cycles.
Compliance, calibration and traceability for regulated workflows
Certified to OIML R60 and rated Class III, 3000 e, the bridge supports legal-for-trade and traceable measurement tasks typical in manufacturing and retail weighments. The unit’s calibration divisions and specified minimum weights facilitate accurate adjustment during initial setup and subsequent verifications, helping to meet audit requirements and maintain product conformity. Technical specifications and approvals make integration into documented quality systems straightforward.
Practical integration and maintenance benefits
Compact platform dimensions and a net weight of around 6.3 kg simplify handling during installation and replacement in confined spaces. The single-load-cell concept reduces mechanical points of failure and streamlines mounting, while the platform’s flat stainless surface suits integration with conveyors or fixtures. Spare-part compatibility and clear mechanical references ease maintenance planning and minimise service downtime for continuous production environments.
Contact Metav Werkzeuge for tailored advice on integrating the KFP 15V20LM weighing bridge into existing processes, or request configuration support and delivery information from our Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930
Technical data
- Article number: TKFP-V20-A
- SKU: KFP.15V20LM
- GTIN: 4045761250208
- Manufacturer: KERN
- Country of origin: CN
- Tariff code: 90318080
Facts
- Weighing range: 6 kg / 15 kg
- Readability: 0.5 g
- Platform surface: 400×300 mm
- Platform dimensions (incl. base): 400×300×125 mm
- Net weight: 6.3 kg
- Minimum weight: 40 g / 100 g
- Calibration divisions (eichwerte): 2 g / 5 g
Special features
- Stainless-steel weighing plate
- Painted steel underframe
- 1 silicone-coated aluminium load cell, IP65
- OIML R60 approval, Class III, 3000 e
- Integrated levelling bubble and adjustable feet
- Suitable as a platform component for scale assemblies
FAQ
What weighing ranges are available for this platform? The KFP 15V20LM platform is supplied for two nominal ranges, 6 kg and 15 kg, allowing selection according to the intended application and required minimum weight.
Is the load cell protected against dust and moisture? Yes. The unit uses a silicone-coated aluminium load cell with IP65 protection to resist dust ingress and splashing, improving reliability in workshop environments.
Can this platform be used for legally verified trade applications? The KFP 15V20LM is approved under OIML R60, Class III, 3000 e, and therefore supports legally relevant weighing tasks when installed and calibrated according to local verification rules.
What are the platform dimensions and how heavy is the unit? The visible weighing surface measures 400×300 mm and the overall platform including the base is listed as 400×300×125 mm; the platform has a net weight of approximately 6.3 kg.
Are levelling aids included for accurate installation? Yes. The platform is supplied with a levelling bubble and adjustable feet to achieve precise horizontal alignment and stable weighing results.
KERN — Address: not provided; Contact: not provided
Zubehör
Benefit from precise, network-ready weighing data and flexible interfaces: the combination of USB/RS-232 connectivity, IoT-ready operation and DIN-rail mounting simplifies integration into production lines and conveyor systems. Order the device directly via Metav Werkzeuge or contact our consultants for configuration support. KERN YKV-01 — Digital weigh transmitter with USB & RS-232, IoT-ready The KERN YKV-01 is a compact digital weigh transmitter designed for industrial scales and automated weighing systems, enabling fast data capture and reliable transfer to computers, PLCs and networked applications. IoT-ready for Industry 4.0 USB and RS-232 interfaces DIN-rail and wall mounting Configurable transmission formats Seamless data flow for automated production The transmitter delivers fast, configurable data transfer, making it suitable for integration into automated lines and process control systems. With native USB and RS-232 interfaces and freely configurable transmission formats, measurement values can be forwarded directly to PCs, PLCs or MES environments. The included software allows calibration, large-format display and export of results into common enterprise systems such as SAP and Oracle, reducing manual transcription and improving production traceability. Compact, robust design that fits industrial spaces Engineered for demanding environments, the unit combines a small footprint ()100×140×36 mm() with a lightweight construction of )0.33 kg(), so it fits neatly in control cabinets or on mounting rails. The plastic die-cast housing resists everyday workshop stresses while permitting both DIN-rail and wall mounting for flexible installation. Power is supplied via USB with a detachable power adapter and included EURO/UK/US adapters, eliminating the need for internal batteries and simplifying service routines. Rated for operation between -10°C and 40°C, the transmitter is suitable for a wide range of industrial settings. Accurate signals and simple configuration for reliable throughput Measurement tasks are handled with essential functions such as weigh and tare, while a measurement frequency of 10 Hz ensures smooth value updates for moving loads on conveyors. The bundled configuration tools enable fast setup and adjustment without specialised equipment, and compatibility with KERN weighing platforms streamlines roll-out across multiple stations. By converting raw readings into ready-to-use formats, the system reduces error sources and supports faster, more economic process control—reflecting a practical approach to Industry 4.0 integration and operational efficiency. For tailored advice on system integration and to procure the KERN YKV-01 through Metav Werkzeuge in Emmerich, contact our consultants by eMail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: YKV-01 Manufacturer: KERN GTIN: 4045761215290 Origin country: CN Facts Dimensions: 100×140×36 mm Weight: 0.33 kg Measurement frequency: 10 Hz Input voltage: 100 V - 240 V, 50 / 60 Hz Operating temperature: -10°C–40°C Special features Material: Plastic Data output: USB + RS-232 Power: USB with detachable power supply Included adapters: EURO; UK; US Mounting: Wall and DIN-rail Functions: Weigh, tare Configuration software included Compatible with all KERN weighing platforms No battery FAQ Is the transmitter compatible with existing KERN platforms? Yes. The KERN YKV-01 is designed for compatibility with KERN weighing platforms and can be connected to existing load cells and platforms without additional converters. Which interfaces are available for data transfer? The device provides USB and RS-232 outputs; transmission formats are freely configurable to match controller or PC requirements. Can the unit be powered from the USB port? Yes. The KERN YKV-01 is powered via USB and ships with a detachable power supply plus EURO, UK and US adapters. Is the transmitter suitable for conveyor-belt applications? Yes. With a 10 Hz measurement rate and configurable output, the transmitter supports dynamic weighing and data forwarding on conveyor systems and production lines. What mounting options are available? The unit supports both DIN-rail and wall mounting for flexible placement within control cabinets or on machine frames. Does the package include configuration tools? Yes. The KERN YKV-01 includes configuration software for calibration, large-format display and data export to other applications. Manufacturer: KERN — Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
Benefit from a compact, IoT-ready transmitter that combines versatile interfaces and simple USB power for fast integration and reliable weight data transfer; order directly via Metav Werkzeuge or consult our team for system-specific advice. KERN YKV-02 — Digital weight transmitter with Ethernet, USB and RS‑232 interfaces The KERN YKV-02 is a compact digital weight transmitter for industrial scales, designed to capture and forward weighing data to networks, PLCs and computers for automated process control. IoT-ready for Industry 4.0 integration Ethernet, USB and RS‑232 interfaces USB-powered with EU/UK/US adapters included DIN-rail and wall-mountable robust housing Rapid integration into automated systems The YKV‑02 enables fast data transfer from a weighing platform to higher‑level systems, supporting Ethernet, USB and RS‑232 interfaces as standard. This combination ensures straightforward connectivity to PCs, PLCs and networked systems, allowing measurement results to be converted into formats compatible with enterprise software (for example SAP or Oracle). The device’s IoT-ready architecture reduces integration time and helps maintain continuous production flow by enabling automated data capture and downstream processing. Dependable measurement performance with efficient power Designed for continuous operation, the transmitter samples at 10 Hz, delivering timely weight updates suitable for conveyor and batching applications. The unit is powered via the USB connector, simplifying wiring and enabling centralised power management; a detachable USB power supply with EU/UK/US plug options is included. Such a power arrangement lowers installation complexity while keeping the control cabinet tidy and energy use efficient, which supports predictable runtime and easier maintenance planning. Space-saving, robust design for industrial environments Housed in a robust plastic die‑cast enclosure, the transmitter combines compact dimensions (100×140×35 mm) with a low mass (0.34 kg), making it suitable for wall mounting or DIN‑rail installation in control panels. The compact form factor conserves valuable cabinet space and protects the electronics in standard industrial settings. Compatibility with existing KERN weighing platforms ensures a reliable mechanical and electrical interface, reducing the risk of retrofit issues when upgrading or expanding weighing points on lines and stations. Ready-to-use package with configuration tools The YKV‑02 is supplied with the necessary accessories to get a weighing point online quickly: the digital transmitter itself, a USB cable with detachable power supply, a DIN‑rail bracket and configuration software. The included software supports calibration, adjustment and large-format visualisation of measured values on a PC, plus export and data handover to other applications. Clear configuration options and freely selectable transmission formats make it easier to standardise data flow across multiple devices and reporting systems, shortening commissioning time and reducing engineering effort. Discuss system compatibility and integration planning with Metav Werkzeuge — request a tailored connectivity assessment for the KERN YKV‑02 from our Emmerich team or ask our consultants to verify the transmitter’s fit for a specific application Technical data Article number: YKV SKU: YKV-02 GTIN: 4045761220423 Manufacturer: KERN Origin: CN Numbers / Core technical data Dimensions (W×H×D): 100×140×35 mm Weight: 0.34 kg Measurement frequency: 10 Hz Operating temperature: -10 °C – 40 °C Input voltage (power adapter): 100 V – 240 V, 50 / 60 Hz Commodity code: 90160090 eClass: 27320101 Special features Data outputs: Ethernet + USB + RS‑232 Power: USB including detachable power supply Power adapters included: EU; UK; US Housing: robust plastic die‑cast Mounting: wall mount and DIN‑rail bracket included Functions: weighing, taring Software: configuration and data visualisation software included Compatibility: compatible with all KERN weighing platforms Typical applications: industry and manufacturing, chemical, food and pharma, building materials, logistics and packaging FAQ How is the YKV‑02 powered and what adapters are supplied? The KERN YKV‑02 is powered via USB; a detachable USB power supply is supplied with EU, UK and US plug adapters for flexible installation. Can the transmitter connect directly to a PLC or network? Yes. The transmitter offers Ethernet and RS‑232 interfaces in addition to USB, enabling direct connection to PLCs, networked systems and PCs for automated data exchange. What sample rate does the unit provide for weight readings? The unit provides a measurement frequency of 10 Hz, suitable for steady conveyor weighing and process monitoring where frequent updates are required. Is mounting hardware included for control cabinet installation? A DIN‑rail bracket and wall‑mounting option are included, allowing installation inside control cabinets or on panels with minimal additional hardware. Does the package include software for calibration and data export? Yes. The YKV‑02 is supplied with configuration software that supports calibration, large‑format display of values and export of results into formats compatible with enterprise systems. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271