600 kg U-Weighing Bridge, 200 g Division, 840×1300×90 mm Metal Platform, IP67, 4 Load Cells, OIML R60 Class III - KERN

Reliable internal power for weighing instruments with a compact lead‑acid design: 6 V / 1.2 Ah capacity and up to 20 h runtime without backlight, plus a standard 12 h recharge cycle and a lightweight 0.3 kg housing for straightforward installation. Order directly via Metav Werkzeuge or consult our advisers for compatibility and procurement guidance. KFB-A01 Internal rechargeable battery (6 V, 1.2 Ah) by KERN The KFB-A01 is an internal lead‑acid rechargeable battery designed as a power supply for precision scales and weighing modules, providing extended portable operation and reliable backup power in workshop and industrial environments. Internal rechargeable lead-acid battery 6 V 1.2 Ah Runtime up to 20 h without backlight Charging time 12 h for full readiness Compact weight 0.3 kg for simple installation Long operating time for uninterrupted weighing processes The internal rechargeable module delivers a clear operational advantage for mobile or battery‑dependent weighing equipment: with 6 V and 1.2 Ah nominal capacity, the cell supports continuous use up to 20 h without backlight, reducing interruptions in measurement cycles and minimising downtime. For businesses that rely on accurate, reproducible weighing—such as small production lines, incoming goods inspection and mobile service units—this extended runtime translates into fewer recharges and more stable workflows. The lead‑acid (Pb) chemistry offers predictable discharge behaviour, which simplifies run‑time planning in daily operation. Simple integration and predictable recharging Charging behaviour and installation are designed for straightforward integration into existing instruments. The battery reaches full charge in 12 h, allowing overnight replenishment during non‑productive hours and predictable readiness for the next shift. At 0.3 kg, the unit is light enough for compact housings while remaining robust for workshop conditions; the modest mass also eases handling during maintenance or replacement. The compact format and internal mounting reduce the need for external adapters and help maintain the original instrument footprint, preserving ergonomics and transportability. Reliability, compatibility and operational benefits Manufactured by KERN, this power module is tailored for weighing accessories and support applications where dependable backup power is essential. The rechargeable battery functions as an internal power source, ensuring that calibration routines and data logging are not disrupted by mains interruptions or temporary field assignments. For operators with mixed fleets of scales, the standardised electrical values facilitate compatibility checks and spare‑parts management. The combination of consistent discharge, recognised chemistry and compact design supports a predictable maintenance rhythm and contributes to long‑term process reliability Specify the KFB-A01 when ordering through Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for procurement advice and technical matching Technical data Article number: KFB-A01 Manufacturer: KERN GTIN: 4045761113848 Country of origin: CN Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Tariff number: 85072080 eClass: 21059207 Core specifications Voltage: 6 V Capacity: 1.2 Ah Weight: 0.3 kg Charging time: 12 h Runtime: up to 20 h without backlight Features & compatibility Type: Pb lead‑acid internal power supply Category: Accessories for scales SKU: KFB-A01 Manufacturer: KERN Origin: CN FAQ What is the expected runtime under normal use? The KFB-A01 offers a runtime of up to 20 h without backlight; actual duration depends on instrument power consumption and usage patterns. Which battery chemistry is used and what does it mean for maintenance? The module uses a lead‑acid (Pb) chemistry, which provides predictable discharge curves and simple maintenance handling compared with more complex chemistries. How long does the battery take to fully recharge? Charging to full capacity takes 12 h under standard charging conditions, making overnight cycles practical for regular operation. Is the unit suitable as a permanent replacement for mains power? The battery is intended as an internal rechargeable power source and backup for scales; long‑term continuous mains replacement is not the primary application. Can the module be integrated into different scale models? The KFB-A01 is designed as an accessory for weighing equipment; compatibility should be confirmed against instrument electrical specifications and mounting provisions. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271

Combine compact RS‑232 connectivity, an included 1.5 m interface cable and direct compatibility with KERN floor, platform and pallet scales for reliable data transfer; order the interface directly via Metav Werkzeuge or consult our specialists for configuration advice. KFN-A01 RS-232 data interface – KERN, for floor and pallet scales, includes 1.5 m cable The KFN-A01 RS-232 data interface delivers dependable serial communication for KERN floor scales, stainless-steel platform scales and pallet scales, enabling straightforward transfer of weighing data to terminals or PCs. RS-232 serial interface with cable 1.5 m interface cable supplied Compatible with KERN BFN, SFB and UFN Streamlined data capture for process control The RS‑232 standard remains a robust choice for industrial weighing applications thanks to its simple, well-documented wiring and broad device support. By offering a dedicated serial connection the interface secures fast data capture from scales into data loggers, label printers or legacy terminals without intermediary conversion. For production environments this means fewer protocol issues, reduced integration time and a predictable data flow from the weighing point to backend systems. The clear, unambiguous signal format reduces the need for repeat readings and supports traceable record keeping. Fast installation and assured compatibility The KFN‑A01 arrives with a 1.5 m interface cable ready for immediate connection, minimising setup time on the workshop floor. Intended for KERN models such as BFN (floor scales), SFB (stainless-steel platform) and UFN (pallet scales), the module is supplied as a factory-fit option and is not retrofittable, so planning for initial integration is advised. The compact module and supplied lead support neat cable routing and straightforward mounting, helping to avoid common installation delays and maintain the uptime of weighing processes. Reliable workflow and supply assurance Compact in design and light in weight, the interface contributes to a tidy installation that integrates with production routines and measurement systems. Choosing accessories from established brands and a trusted distributor reduces procurement risk: Metav combines decades of precision expertise with central supply from Emmerich, a broad product range and consistent stock handling. This supplier reliability supports uninterrupted operations and aligns with quality-driven purchasing policies in industry and trade. For fast supply and expert advice on the KFN-A01 RS-232 data interface, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: KFN-A01 Manufacturer: KERN SKU: KFN Facts Weight: 0.15 kg Cable length: 1.5 m Special features Interface: RS-232 Compatible with: KERN BFN, KERN SFB, KERN UFN Not retrofittable Supplied: interface cable 1.5 m FAQ What types of scales is the interface compatible with? The KFN-A01 RS-232 data interface is compatible with KERN floor scales (BFN), stainless-steel platform scales (SFB) and pallet scales (UFN). Is the interface supplied with a cable? Yes, the product is supplied with an included interface cable of 1.5 m length for immediate connection. Can the RS‑232 interface be retrofitted to existing scales? The interface is specified as not retrofittable; it is intended for original-fit installation on the compatible KERN models. Which data destinations can receive signals from this interface? The RS‑232 output is suited to PCs, terminals, label printers and data loggers that accept serial input in standard ASCII or configured protocols. How heavy is the module and how does that affect installation? The module has a weight of 0.15 kg, allowing discreet mounting with minimal impact on scale handling and cabling. Manufacturer: KERN · Metav Werkzeuge, Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930

Take advantage of the 15 m special length and the secure link between indicator and platform for flexible scale installation; compatibility notes require checking models with optional calibration before purchase. Order the cable directly via Metav Werkzeuge or consult our specialists for application advice. BFB-A03 connection cable for scales by KERN — 15 m special length The BFB-A03 is a 15 m connection cable designed to link a scale indicator and its weighing platform, suitable for industrial and workshop weighing setups where extended separation is required 15 m special length for flexible layouts Designed for indicator-to-platform connection Not retrofit‑compatible on calibrated models Suitable for industrial weighing installations Flexible installation that keeps the workspace organised The extended 15 m run enables placing the weighing indicator at a convenient workstation while the platform remains in the process area, so measurement points and operator stations can be separated without resorting to makeshift extensions. This layout reduces clutter on the bench and minimises the need to reposition heavy platforms, delivering a more efficient workflow. The long reach also simplifies integration into existing production lines where direct proximity is impractical. Clear compatibility guidance to avoid costly errors Compatibility is decisive when selecting this accessory. The cable is intended specifically for connection between evaluation unit and platform and is not retrofit‑compatible on models with optional calibration, which means certain scale configurations require ordering the cable at the time of initial system specification. For installations where calibration options have been selected later, an alternative factory‑approved connection must be used. This transparency prevents downtime and supports a reliable measuring chain. Practical benefits for industrial weighing applications Beyond mere length, the design focuses on dependable signal transmission and straightforward installation in workshop and industrial contexts. The robust construction suits routine handling and fixed installations, helping to maintain consistent measurement performance. Combined with Metav Werkzeuge’s role as a quality filter for the European market, the accessory contributes to a predictable supply chain and dependable product selection for professionals seeking long‑term reliability. Contact Metav Werkzeuge in Emmerich for compatibility checks and to secure the KERN BFB-A03 15 m connection cable — expert advice and prompt dispatch available from our warehouse to your workbench Technical data Article number: BFB-A03 Manufacturer: KERN GTIN: 4045761161788 Country of origin: China Core data Cable length: 15 m Weight: 3.5 kg Tariff code: 84239010 eCl@ss: 21131814 Special features Function: connection between indicator and platform Note: not retrofit-compatible for models with optional calibration Product group: scales accessories Category path: Scales › Accessories FAQ Is this cable suitable for remote mounting of the indicator? The BFB-A03 cable by KERN is intended precisely for remote mounting, enabling the indicator to be positioned up to 15 m from the platform for ergonomic or process-driven installations. Can the cable be fitted afterwards if calibration was added later? No, the cable is not retrofit‑compatible on models that use an optional calibration package; the BFB-A03 must be confirmed as suitable for the specific scale configuration before procurement. Which devices is the BFB-A03 compatible with? Compatibility depends on the scale model and its factory options; the BFB-A03 is a connection cable for indicator-to-platform links on compatible KERN weighing systems. Where does this cable ship from and who supplies it? The KERN BFB-A03 is supplied via Metav Werkzeuge’s stock in Emmerich, with logistics set up for reliable delivery to industrial and workshop customers. Manufacturer: KERN — Origin: China

KERN Analogue Module Technical Data: and Summary:Manufacturer: KERNSeries: KFBModel: Analog ModuleOrder now Analogue Module Online.

Summary and Technical Data for KERN Y-Schnittstellenkabel :Manufacturer: KERNSeries: CFSModel: Y-SchnittstellenkabelOrder your new Y-Schnittstellenkabel now Online!

Take advantage of the combination of long runtime, rapid recharge and proven KERN compatibility to keep weighing operations uninterrupted. Order the power module directly via Metav Werkzeuge or consult our specialists for tailored advice. KERN GAB-A04 internal battery pack — up to 90 h runtime, approx. 12 h recharge The GAB-A04 is an internal rechargeable battery pack for KERN weighing instruments, designed to deliver extended operation between charges and secure measurement availability in workshop and industrial settings. Internal rechargeable battery operation Up to 90 h runtime (without backlight) Full recharge in approx. 12 h Compatible with KERN scale series Fewer interruptions thanks to extended operation The internal power module provides a long runtime of up to 90 h without backlight, which means extended periods of unattended measurement and less need for mains connection. For production environments and mobile weighing tasks this reduces process interruptions and allows measuring equipment to remain operational during shift changes or temporary site relocations. The specification assumes operation with the display backlight switched off; enabling illumination will reduce the runtime accordingly. Fast recharge to keep workflows moving A complete recharge takes approximately 12 h, allowing predictable scheduling of maintenance windows and ensuring the instrument is ready for the next workday. The charging characteristic supports efficient turnaround between uses, and the unit’s modest mass of 0.74 kg makes replacement and handling straightforward for workshop staff. These attributes contribute directly to higher equipment availability and lower indirect labour costs associated with battery management. Designed for seamless integration with KERN instruments This battery pack is intended as an internal accessory for KERN weighing devices and is supplied as a purpose-built power solution rather than a third-party retrofit. The design focuses on plug-and-play compatibility with the relevant scale range, simplifying installation and avoiding complex conversions. As a dedicated power module it maintains the instrument’s original operation modes and preserves calibration routines, supporting consistent measurement results in daily use. Reliability backed by a trusted distributor network Sourcing the power module through an established partner ensures dependable supply and after-sales continuity. Metav Werkzeuge acts as a quality filter for the European market, combining long-standing expertise with a wide product range to simplify procurement. The combination of component reliability and a dependable logistics partner reduces the risk of downtime and supports uninterrupted measurement capability in industrial and workshop environments. Contact Metav Werkzeuge in Emmerich to secure a KERN GAB-A04 for your scales or request further technical clarification via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: GAB-A04 Manufacturer: KERN GTIN: 4045761126473 Country of origin: CN Facts Weight: 0.74 kg Recharge time: 12 h Battery runtime: up to 90 h (without backlight) Tariff number: 85072080 ECLASS: 21059207 Special features Internal battery operation for scales Lead (Pb) battery chemistry Accessory for weighing equipment Product group: batteries / accumulators Segment: scale accessories FAQ Is the battery compatible with all KERN scales? The battery pack is designed for integration with the relevant KERN weighing instrument series; compatibility should be checked against the instrument model and specifications. How long does a full recharge take? A full recharge requires approximately 12 h under standard charging conditions for the GAB-A04 internal pack. What runtime can be expected in daily use? The specified runtime is up to 90 h without display backlight; using the backlight or additional functions will reduce available operating time. What type of battery is used in this module? The unit uses a lead (Pb) accumulator chemistry, specified for internal operation in compatible KERN instruments. Is the runtime affected by instrument settings? Yes. Features such as display illumination and frequent data transmissions shorten the battery life compared with the quoted figure for non-illuminated operation. KERN · Origin: CN · GTIN: 4045761126473

Take advantage of a lightweight, workshop-ready stand that raises the weighing indicator for clearer readings and flexible installation; compatible with a wide range of KERN scale models and ready to order via Metav Werkzeuge or discussed with our consultants for application advice. KERN BFS-A07 stand — Indicator-unit stand, KERN-compatible The BFS-A07 stand is a compact mounting solution designed to raise weighing indicator units for industrial and workshop scales, making displays easier to read and integrating cleanly with existing KERN equipment. Compact stand for raising indicator units Compatible with KERN UFA, BFB, BFN and BFS Also fits KERN pallet and through-rail scales Lightweight construction approx 2.6 kg Clear readings and dependable positioning for weighing tasks The stand offers stable positioning for indicator units, which improves readability and reduces handling errors during routine weighing operations. Built as a dedicated accessory for scales, this mounting solution ensures the indicator is elevated away from the weighing platform, helping to prevent signal interference and making the display accessible from a comfortable viewing angle. The combination of a compact footprint and robust support simplifies integration into production lines and workshop benches, delivering practical benefits without complex modifications. Practical workshop integration and ergonomic benefit With a focus on convenience, the support stand reduces clutter on the work surface and provides an ergonomic viewing height for operators handling frequent weighings. The lightweight construction allows for repositioning when workflows change, while the compact design maintains a minimal footprint in tight areas. Installation is straightforward when used with the compatible KERN equipment named below, enabling quick set-up in dispatch, goods-inwards or production cells where clear indicator visibility speeds up processes and reduces downtime. Clear compatibility to match existing KERN systems The stand is intended specifically as an accessory for KERN weighing systems, offering compatibility with a range of models so that workshops can standardise on a single mounting solution. By matching the stand to compatible weighing beams, floor scales and pallet models, users gain a consistent mounting approach across different scale types. This targeted compatibility minimises uncertainty when specifying accessories and supports a streamlined workflow in industrial weighing applications. For tailored advice or order placement, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the KERN BFS-A07 stand and its suitability for specific scale setups. Technical data Article number: BFS-A07 Manufacturer: KERN SKU: BFS-A07 GTIN: 4045761111547 Weight: 2.6 kg Origin: CN Facts Weight: 2.6 kg GTIN: 4045761111547 Commodity code: 73269098 ECLASS: 21170601 Compatibility & features Accessory for scales (stands category) For raising weighing indicator / evaluator units Compatible with weighing beams KERN UFA Suitable for floor scales KERN BFB, BFN and BFS Fits pallet scales KERN UFB and UFN and through-rail scale KERN NFB FAQ What scales is this stand compatible with? The stand is compatible with a range of KERN models; compatible types include weighing beams KERN UFA, floor scales KERN BFB/BFN/BFS, pallet scales KERN UFB/UFN and through-rail scale KERN NFB, ensuring broad applicability in industrial weighing setups. Is the stand easy to move around the workshop? Yes. The KERN BFS-A07 stand has a lightweight construction of approximately 2.6 kg, allowing for straightforward repositioning when workflows or station layouts change. What is the primary purpose of the stand? The stand is designed to raise the weighing indicator unit, providing an ergonomic viewing height and reducing interference with the weighing platform for clearer, more reliable readings. Can this stand be used for multiple indicator models? The stand is provided as a universal accessory for the compatible KERN scale families listed above, making it suitable for use with a variety of indicator layouts within those model ranges. Manufacturer: KERN, Origin: CN

Take advantage of the combination of compatibility with KERN BFN, UFN and NFN, reliable stable support for precision weighing, and rapid dispatch from Emmerich to keep calibration and measuring routines uninterrupted. Order the stand directly via Metav Werkzeuge or ask our consultants for clarification. BFN-A04 Stand for BFN, UFN and NFN by KERN — compatible scale accessory BFN-A04 is a dedicated stand designed to support KERN scale systems, offering stable mounting for precision weighing applications in workshops and production environments. KERN accessory for BFN, UFN and NFN Stable support for precise weighing Simple mounting and secure fitting Rapid dispatch from Emmerich Stable support for consistent measurement results A properly chosen support reduces variability in weighing and measurement tasks. The BFN-A04 stand provides a secure platform that helps maintain precision across repeated measurements, lowering fluctuation and improving reproducibility. Compatibility with the specified KERN models ensures interfacing without improvised adapters, which translates into fewer setup errors and a more reliable measuring process for lab benches and workshop scales. Faster installation keeps workflows moving Time spent aligning and mounting equipment is time away from production. The stand is engineered for straightforward mounting and secure fitting with compatible scale units, helping to minimise installation time and reduce downtime. Clear interfaces and model-specific compatibility mean fewer steps to get measuring equipment into service, supporting efficient changeovers and quicker calibration cycles in busy environments. Sourcing and logistics that support operational continuity Metav's distribution from Emmerich combines a broad product range with dependable logistics. Relying on a known accessory such as this stand reduces procurement complexity and supports predictable replenishment. Metav Werkzeuge’s long-standing marketplace presence and extensive product portfolio back a steady supply chain, so installations and repairs can proceed without administrative delays. Who benefits from this accessory Workshops, calibration labs and production lines that use KERN scale equipment will value the robust mounting and direct compatibility of the stand. The accessory suits environments where stable, repeatable weighing is required and where fast, uncomplicated integration of scale components supports daily operations and quality assurance routines. For secure mounting of KERN scale units, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to request product availability and expert advice. Technical Data Article number: BFN-A04 Manufacturer: KERN Designation: Stand for BFN, UFN and NFN Category: Accessories for scales Core data ECLASS: 21170601 Special features Compatibility: for BFN, UFN and NFN Application area: accessories for weighing systems Sales channel: available via Metav Werkzeuge with rapid dispatch FAQ Which KERN models is the stand compatible with? The stand is compatible with the KERN BFN, UFN and NFN series and is intended for use with those scale models. What purpose does the stand serve in a weighing setup? The stand provides stable mechanical support to improve precision and reproducibility when using compatible KERN weighing units. Is the stand suitable for workshop and production environments? Yes, the design targets workshop and production use where a secure, model-specific mount for scale units is required. How straightforward is assembly of the stand? Assembly is designed to be straightforward, with model-specific interfaces that simplify securing the scale unit and reduce setup time. Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930

Take advantage of rapid visual decision-making with the combination of a 3‑colour LED and RS‑232 power connection, ensuring consistent tolerance checks and seamless integration with existing KERN scales; order the device directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN CFS-A03 signal lamp — 3‑colour LED, RS‑232 powered (KERN) The KERN CFS-A03 is a compact signal lamp designed for optical support of weighings within tolerance ranges, intended for use alongside KERN scale series in industrial and laboratory environments 3‑colour LED: red, green and yellow Powered via RS‑232 interface Compatible with multiple KERN scale series Interface cable sold separately Faster decisions through clear visual signalling The integrated 3‑colour LED provides immediate visual feedback for out-of-tolerance, within-tolerance and over-limit conditions, enabling faster sorting and fewer stoppages on production lines. As an indicator light for weighing stations, the device reduces reliance on continuous manual checks by offering clear status information at a glance. This reliability supports throughput efficiency and helps maintain consistent quality control without adding complexity to existing routines. Seamless integration with existing scale systems Designed for straightforward connection, the unit receives power and control signals via RS‑232, allowing direct interaction with a wide range of KERN scales. This method keeps wiring compact and centralises signal handling at the scale interface. Compatibility with multiple KERN series ensures flexible deployment across workbenches and packing lines, while the note that the interface cable is sold separately clarifies procurement requirements before installation. Compact, robust design for continuous operation With a compact footprint and modest mass, the lamp fits into tight production environments and mounting arrangements without obstructing workflows. The low-maintenance LED technology offers long service life and consistent luminosity, reducing downtime and replacement frequency. The unit’s role as a dedicated optical support tool helps streamline operator tasks and improves traceability of batch sorting decisions on automated or semi-automated weighing stations. For customised advice on integrating the KERN CFS-A03 into existing systems or to confirm series compatibility, contact Metav Werkzeuge — experts in precision tools and storable supply from Emmerich; our consultants can advise on the required interface cable and delivery options via info@metav-werkzeuge.com or by phone. Technical data Article number: CFS-A03 Manufacturer: KERN GTIN: 4045761133471 Country of origin: CN Facts Dimensions: 100x180x300 mm Weight: 1.04 kg Tariff number: 84239010 eClass: 27110631 ETIM: EC000399 Special features 3‑colour LED: red, green and yellow Powered via RS‑232 by the scale Compatible with KERN series BFB, BFN, BID, CKE, CPB‑N, GAB‑N, GAB‑P, IFB, IFS, IOC, KFB‑TM, KFN‑TM, KIB‑TM, NBB, NFB, NFN, SFB, UFA, UFB, UFC, UFN Interface cable not included FAQ What does the three‑colour LED indicate? The three‑colour system shows under, within and over tolerance states to simplify sorting and visual quality checks for the KERN CFS-A03 signal lamp. How is the lamp powered and controlled? Power and control signals are provided via the scale’s RS‑232 interface; the CFS-A03 relies on the connected scale for operation. Is a connecting cable included with the unit? No, the interface cable for the scale is not included; the necessary cable must be ordered separately according to the scale model. Which scales are compatible with this signal lamp? The lamp is compatible with a broad range of KERN scale series (listed in the technical data) and is intended to integrate directly into existing weighing setups. Can the lamp improve production throughput? By providing clear, immediate visual feedback on tolerance status, the indicator light reduces manual checks and supports faster, more consistent decision-making on the line. Manufacturer: KERN; Address: —; Contact: —