KGMN 200-02 Indexable Insert for Stahl - MetavCUT

Take advantage of a compact, robust clamp holder with a 16 x 16 mm cross-section and a 125 mm overall length for stable parting operations; its compatibility with Korloy KGMN 200 inserts ensures quick tool changes and predictable performance. Order the parting tool clamp holder directly via Metav Werkzeuge or ask our consultants if needed. KGMN Parting Tool Clamp Holder — compact 16 x 16 mm clamp for KGMN 200 inserts (Teknik Makina) The KGMN Parting Tool Clamp Holder is a compact clamp holder designed for precise parting and grooving tasks on lathes, engineered to accept KGMN 200 indexable inserts and provide secure clamping with an M4x10 clamping screw. Robust 16 x 16 mm cross-section for rigidity Compatible with Korloy KGMN 200 inserts M4x10 clamping screw with T15 hex key 125 mm overall length for stable support Stable clamping for consistent parting results A compact holder with a 16 x 16 mm cross-section provides a high stiffness-to-size ratio, reducing vibration during parting and grooving. The internal geometry positions the insert precisely, translating into repeatable cut depth and surface finish. The M4x10 clamping screw combined with the T15 key offers straightforward tightening and secure fixation; this simplicity helps maintain cycle-time efficiency in serial production while limiting setup errors. Compatibility and quick insert changes to keep machines running Designed specifically for KGMN 200 inserts from Korloy, the holder accepts the standard insert format and the 2C shank designation, enabling quick retooling with familiar indexable parts. The clamp head width of 16.2 mm ensures correct seating of the insert and reliable edge support. For workshops standardising on Korloy tooling, the holder reduces inventory complexity and shortens changeover times, which supports higher machine uptime and lower unit costs. Built for workshop practicality and durability With an overall length of 125 mm and a total height of 16 mm, the component balances accessibility at the toolpost with compact overhang to minimise chatter. The unit weighs 0.23 kg, making handling and mounting straightforward during tool set-up. The specified maximum parting depth of 16 mm and a cutting-width capacity of 2 mm mean the fixture is suitable for common parting and grooving tasks across a broad range of turned parts. Materials and finish are chosen to withstand regular use in industrial environments while keeping maintenance simple. Secure supply through Metav Werkzeuge for Teknik Makina tooling and request tailored application advice from our specialists at Metav Werkzeuge in Emmerich Technical data Article number: D017TM Manufacturer: Teknik Makina Brand designation: KGMN SKU: D017TM Fits inserts: Korloy KGMN 200 ISO designation: 1616 Facts Cross-section: 16 x 16 mm Cutting head width: 16.2 mm Overall length: 125 mm Total height: 16 mm Max parting depth: 16 mm Cutting width: 2 mm Weight: 0.23 kg Clamping screw: M4x10 Hex key: T15 Special features Compatible with 2C KGMN 200 toolholder shanks Clamp-style parting holder for grooving and parting Compact design for reduced overhang Quick and secure insert clamping Suitable for standard lathe toolposts FAQ What insert type does this clamp holder accept? The clamp holder is made to accept Korloy KGMN 200 indexable inserts; the geometry matches the KGMN profile for correct seating and support. Which screw and key are required for clamping? Clamping is performed with an M4x10 screw tightened using a T15 hex key, as specified for the unit. What are the maximum parting depth and cutting width? The holder supports a maximum parting depth of 16 mm and a cutting width of 2 mm, suitable for typical grooving and parting operations. Is the holder compatible with a 2C shank toolpost? Yes, the design corresponds to the 2C KGMN 200 shank designation, facilitating direct mounting on compatible tool posts. What is the article number for ordering and reference? Reference article number D017TM when ordering the Teknik Makina KGMN parting tool clamp holder to ensure correct supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, repeatable parting operations thanks to secure clamping and a narrow 2 mm cutting width, combined with quick insert compatibility for efficient changeovers; order directly from Metav Werkzeuge or contact our consultants for compatibility advice. Parting tool holder KGMN — 12 mm height, 2 mm cut width, Teknik Makina A compact Parting tool holder KGMN engineered for controlled parting and grooving on lathes and turning centres, designed around Korloy KGMN 200 inserts for reliable metal‑cutting applications. Parting tool holder for KGMN 200 inserts 2 mm cutting width for narrow grooves Secure clamp with M4x10 fastening 125 mm overall length, 12 mm height Consistent clamping for precision parting A sturdily machined clamp body provides reliable fixation of the insert, reducing movement under load and helping to sustain repeatable tolerances. The holder’s M4x10 fastening and supplied hex key size T15 ensure a firm, serviceable connection between insert and bar; this straightforward mechanical design keeps set‑up times short and maintenance predictable. For shops seeking process stability, the compact geometry contributes to reduced vibration and steadier finish quality on workpieces. Narrow‑groove performance that improves surface quality With a 2 mm cutting width and a cutting‑head envelope of 12.2 mm, the holder is optimised for tight parting and grooving operations where clearance is limited. The maximum plunge depth of 12 mm gives sufficient engagement for many through‑parting and grooving jobs while the slim cut width minimises material removal and cutting forces. In practice this translates to less heat buildup, a cleaner chip flow and better surface integrity on the finished component. Built for efficient workshop handling Weighing just 0.13 kg and finished to standardised ISO dimensions (ISO 1212), the holder is easy to handle during tool changes and aligns with common bar systems. The overall length of 125 mm and a total height of 12 mm fit compact tool posts and allow rapid indexing in many turning centres. The low mass reduces inertial forces during acceleration, helping to preserve insert life and enabling confident, repeatable setups in production or jobbing environments. Compatibility and quick changeover with Korloy inserts Designed specifically for Korloy KGMN 200 inserts and documented as compatible with bar designation 2C KGMN 200, the holder supports fast replacement of cutting edges and straightforward tool management. The adherence to recognised insert geometry and the presence of a standard clamping screw mean swaps are predictable and can be integrated into existing tool‑holding inventories. Where machining flexibility matters, this holder provides a compact, industry‑aligned option for parting and grooving tasks. Contact Metav Werkzeuge for technical advice and to arrange supply of this Teknik Cutting Tools parting tool holder from our Emmerich warehouse. Technical data Article number: D016TM Manufacturer: Teknik Makina eClass: 21181005 Dimensions & weight Holder width: 12 mm Holder height: 12 mm Cutting head width: 12.2 mm Cutting width: 2 mm Max plunge depth: 12 mm Overall length: 125 mm Overall height: 12 mm Weight: 0.13 kg Compatibility & fastenings Compatible with Korloy KGMN 200 inserts Bar designation: 2C KGMN 200 Clamping screw: M4x10 Hex key size: T15 ISO designation: 1212 FAQ What insert type fits this holder? The holder is compatible with Korloy KGMN 200 inserts and accepts the standard geometry used for that series. What is the cutting width and how does that affect use? The 2 mm cutting width allows narrow parting and grooving where minimal material removal and low cutting forces are required. Which fastening components are included or required? Fastening is by an M4x10 screw; torque should be applied with a T15 hex key to secure the insert correctly. Is the holder suitable for production turning centres? Yes — the compact parting tool holder KGMN with 125 mm overall length and ISO‑aligned dimensions is designed for reliable use in production and jobbing environments. How deep can the holder cut in a single plunge? The maximum plunge depth is 12 mm, suitable for many through‑parting and groove‑cutting operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise geometry and reliable compatibility: the compact parting blades deliver stable cutting at a 32 mm blade height with a narrow 1.65 mm blade width, while the 150 mm length and 36 mm maximum cutting depth support secure engagement in production lathes. Order the parting blade directly via Metav Werkzeuge or consult our specialists for integration advice. Parting blades KL34TM — precision parting blade, 32 mm height, for KGMN 200 inserts (Teknik Makina) The Parting blades KL34TM are designed for precision parting and grooving on CNC and manual lathes, compatible with KGMN 200 indexable inserts for efficient chip control and consistent results 32 mm blade height for secure clamping Compatible with KGMN 200 inserts (Korloy) 36 mm maximum cutting depth for deeper cuts 1.65 mm blade width for narrow kerf and material savings Stable geometry for efficient parting and grooving The KL34TM parting blade features a 32 mm blade height and 25 mm cutting height, engineered to provide a rigid interface between toolholder and insert. This geometry reduces vibration and improves dimensional stability during cut-off and grooving operations, so the risk of chatter is decreased and finish quality is improved. With a 1.65 mm blade width, material removal is optimised for minimal waste while maintaining sufficient flute clearance. The combination of these dimensions supports higher feed rates where the process permits and contributes to predictable cycle times, which is essential for production planning in job shops and small-scale manufacturing. Quick set-up and predictable tool performance Designed for indexable inserts of the KGMN 200 family, the blade simplifies tooling logistics: inserts from Korloy fit directly, reducing changeover complexity and inventory variety. The overall length of 150 mm gives adequate reach for a variety of setups, while the specified holder depth of 36 mm ensures secure seating and reliable clamping in compatible toolposts or holders. This clarity of interface enables faster machine set-up and helps maintain process repeatability, so teams can focus on throughput rather than troubleshooting tooling interfaces. For operators new to parting tools, the straightforward compatibility and defined dimensions make integration into existing tool libraries uncomplicated. Less rework, more consistent results for workshops A narrow kerf and robust blade height combine to lower scrap rates by reducing workpiece deflection at the cut-off zone. The design suits both single-item prototyping and small-series production where material conservation and surface condition matter. For those seeking an easy-to-understand technical specification, parting is the process of cutting a finished contour free from the parent material; these blades provide the mechanical stability required to achieve that with minimal post-process finishing. Backed by Teknik Makina’s manufacturing standards, the component supports continuous operation and predictable wear characteristics, contributing to lower downtime and a more reliable production flow. Contact Metav Werkzeuge today to discuss Teknik Cutting Tools KL34TM parting blades for a suitable holder configuration — call +49 2822 7131930 or email info@metav-werkzeuge.com to clarify fitment and delivery options Technical data SKU: KL34TM Brand: Teknik Makina Suitable for inserts: KGMN 200 Compatible insert manufacturer: Korloy Dimensions Blade height: 32 mm Cutting height: 25 mm Blade width: 1.65 mm Length: 150 mm Maximum cutting depth (holder): 36 mm Compatibility and features For parting and grooving applications Indexable-insert system Narrow kerf design for reduced material loss Designed for secure clamping in compatible holders FAQ What insert type fits this blade? The KL34TM parting blade is designed for KGMN 200 indexable inserts; Korloy inserts in that designation are a direct match. Which operations is this blade intended for? This blade is intended for parting (cut-off) and grooving tasks on CNC and manual lathes where a narrow kerf and stable geometry are required. How does blade width affect material savings? A 1.65 mm blade width reduces the kerf compared with wider tools, lowering material loss and often reducing cycle energy per parted component. Can this blade be used in high-production environments? Yes, the KL34TM’s rigid profile and standard insert compatibility support repeatable use in serial production provided proper clamping and cooling practices are observed. What is the maximum practical cutting depth? The blade specification lists a maximum cutting depth of 36 mm for the holder seating; actual achievable depth depends on machine capability and holder design. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of narrow cutting kerf and stable clamping for efficient parting operations; compatible with Korloy KGMN 200 indexable inserts. Order directly via Metav Werkzeuge or consult our specialists for application advice. Stechschwerter — Parting blade with 1.65 mm kerf and 26 mm blade height (Teknik Makina) The Stechschwerter is a parting blade designed for precision parting and grooving in lathe operations, compatible with KGMN 200 indexable inserts and intended for industrial turning applications Compatible with Korloy KGMN 200 inserts Precision 1.65 mm cutting width Blade height 26 mm for stable clamping 110 mm overall length for easy handling Minimise material waste with a narrow, consistent kerf The blade’s 1.65 mm cutting width delivers a narrow kerf that directly reduces scrap and material costs while maintaining throughput. In parting operations, a slim cutting profile means less removed material per cut and faster chip evacuation; this supports higher workpiece yields without sacrificing cycle consistency. Designed to work with KGMN 200 indexable inserts, the assembly offers the repeatability required for batch production and frequent setup changes, ensuring process reliability across shifts. Stable clamping and consistent surface finish for dependable runs A 26 mm blade height combined with a 21.4 mm cutting height supports secure fixation in standard clamp holders, reducing vibration and improving surface finish at the parting line. The blade’s 110 mm overall length is balanced for operator handling and machine clearance, while the holder’s maximum engagement depth of 36 mm allows for deeper parting tasks where required. These mechanical characteristics translate into fewer rejects and reduced need for secondary finishing, delivering measurable efficiency gains for job shops and production lines. Practical economy and process advantages for metalworking shops Using an indexable-insert system with this parting blade simplifies maintenance: worn inserts can be rotated or replaced without discarding the blade, cutting tooling expenditure over time. Compatibility with widely available Korloy inserts ensures straightforward sourcing of grades optimised for various materials. The result is a solution that supports fast first-piece approval and predictable production rhythms, helping procurement and engineering teams to plan tooling stocks with confidence. Where this blade fits into the workflow The component is primarily for turning operations that require precise parting off and grooving, suitable for use in workshop and light-industrial production environments. Its geometry and insert interface make it particularly useful where minimal kerf and strong clamping are priorities—for example, in bar turning, batch parting, and finish-grooving tasks. For application-specific setup or to confirm insert grade selection, Metav’s technical advisors can provide guidance tailored to the machining scenario. Contact Metav Werkzeuge in Emmerich for application advice and to secure the Teknik Makina parting blade; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: KL37TM Brand: Teknik Makina Suitable for inserts: KGMN 200 Compatible insert manufacturer: Korloy Facts Blade height: 26 mm Cutting height: 21.4 mm Cutting width: 1.65 mm Overall length: 110 mm Max holder engagement / cutting depth: 36 mm SKU: KL37TM Special features Parting blade for indexable inserts Designed for stable clamping in turn-milling setups Reduced kerf for lower material waste FAQ Which inserts fit this parting blade? The parting blade is configured for KGMN 200 indexable inserts; Korloy-specified insert grades for the KGMN 200 family are compatible with the TekniK Makina blade (SKU KL37TM). What are the key dimensions to check before mounting? Check the 26 mm blade height, 21.4 mm cutting height, 1.65 mm cutting width, and the 110 mm overall length to ensure correct fit in the clamping holder and adequate machine clearance. Can this blade be used for deep parting operations? The blade supports a holder engagement of up to 36 mm, which allows for deeper parting where the clamping system and machine setup provide sufficient rigidity. How does the narrow kerf affect production? A 1.65 mm kerf reduces material removal per cut, lowering scrap and improving yield; it also promotes faster chip evacuation in many parting operations. Is the blade suitable for high-volume production? Yes—when combined with indexable inserts such as KGMN 200, the blade offers quick insert changes and consistent repeatability, making it suitable for batch and continuous production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com