150mm Cartridge for Boring Tool 120-170 CCMT 1204, Standard - Teknik Makina
€109.00
Product information "150mm Cartridge for Boring Tool 120-170 CCMT 1204, Standard - Teknik Makina"
Take advantage of a precision fit and rapid replacement cycle to maintain steady machining output; the cartridge offers secure seating for CCMT 1204 inserts and straightforward exchange to reduce downtime — order via Metav Werkzeuge or consult their specialists for compatibility advice.
Cartridge KR119TM — Cartridge for Boring Tool 120-170 CCMT 1204 (Teknik Makina)
The Cartridge KR119TM is a replacement insert cartridge for the boring tool 120-170 CCMT 1204, engineered to ensure stable insert seating and consistent performance in turning and boring applications.
Precision fit for CCMT 1204 holders
Durable design for repeatable positioning
Quick replacement to reduce downtime
Secure seating for consistent parts quality
The replacement insert is designed to deliver a precision fit that reduces micro-movement at the cutter interface, improving repeatability and part accuracy. A reliably seated CCMT 1204 insert lowers the risk of chatter and dimensional drift during extended cycles, which supports tight tolerance work. For workshops that depend on consistent batch quality, the stable insert interface translates directly into fewer reworks and more predictable inspection results.
Faster tool changes to keep production flowing
Optimised for quick exchange, the cartridge enables rapid replacement of worn inserts, which shortens machine idle time and improves production uptime. Clear compatibility with the 120–170 boring range and the CCMT 1204 insert format streamlines inventory management for tooling spares. By reducing changeover duration, the insert solution supports leaner process flows and contributes to measurable efficiency gains on the shop floor.
Built to withstand workshop conditions
Constructed for robust service, the cartridge emphasises secure clamping and mechanical stability under typical turning loads. The combination of precise seating and durable design helps to maintain cutting geometry over prolonged use, reducing the frequency of positional checks. Routine inspection and correct mounting ensure the cartridge continues to deliver reliable performance, supporting both one-off jobs and repetitive production runs.
For a precision replacement insert from Teknik Makina, contact Metav Werkzeuge for local supply and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
- Article number: KR119TM
- Product: Cartridge for Boring Tool 120-170 CCMT 1204
- Manufacturer: Teknik Makina
Core data
- Compatibility range: 120–170
- Compatible insert: CCMT 1204
- SKU: KR119TM
Special features
- Precision fit for insert seating
- Quick replacement insert
- Designed for stable clamping in boring tool
FAQ
Is the cartridge compatible with my 120–170 boring setup?
The Cartridge KR119TM from Teknik Makina is specified for use with the boring tool 120-170 CCMT 1204 and accepts CCMT 1204 inserts for correct seating.
Which insert format is required for this cartridge?
This cartridge is designed specifically for the CCMT 1204 insert format, enabling secure seating and standardised replacement procedures.
How does the cartridge influence machining accuracy?
By providing a precision-fit seating for the CCMT 1204 insert, the Cartridge KR119TM reduces micro-movement and improves repeatability, which helps to maintain dimensional accuracy over longer runs.
Is the cartridge suitable for continuous production use?
The cartridge is built for stable clamping under normal turning and boring loads and supports routine changeovers to limit downtime in continuous production environments.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Passend für
High rigidity from the 40 mm shank combined with compatibility for CCMT 1204 indexable inserts ensures stable internal boring across the 120–170 mm diameter range, delivering consistent surface finish and longer insert life; order directly via Metav Werkzeuge or contact the technical consultants for application advice. Teknik Makina Boring Bar for CCMT 1204 Indexable Inserts — 40 mm shank, 120–170 mm range Teknik Makina Boring Bar for CCMT 1204 Indexable Inserts is a compact, heavy‑duty holder designed for precision internal boring with CCMT 1204 carbide inserts, suited to medium and large bore operations. Compatible with CCMT 1204 indexable inserts Diameter range 120–170 mm 40 mm shank for high rigidity Robust 3.281 kg construction Greater repeatability through proven clamping and insert compatibility The holder supports CCMT 1204 indexable inserts and uses a standard T20 Torx key with an M5x12 clamping screw for secure seating and fast insert changes. This configuration reduces set‑up time and minimises run‑out variation, which translates into consistent bore tolerances and fewer rejected parts. The simple, widely used screw and key sizes mean replacement components are easy to source and maintenance can be carried out with standard workshop tools. Reduced vibration and improved surface finish from a rigid tool body A 40 mm shank and a 139 mm overall length create a stiff assembly that resists deflection during heavy cuts. The tool’s mass — 3.281 kg — contributes to damping cutting forces, stabilising the cutting zone and extending insert life. For operations where surface integrity matters, this rigidity delivers measurable improvements, such as reduced need for rework and more predictable tool life, benefiting both batch production and one‑off precision tasks. Wide bore capability and practical workshop advantages Engineered for a diameter range of 120–170 mm, the holder is suitable for a variety of internal boring tasks in medium to large components. The design enables quick insert indexing and repeatable seating, supporting efficient changeovers and shorter cycle times. Backed by Teknik Makina manufacturing and supplied through Metav Werkzeuge, this solution pairs industrial quality with straightforward procurement and reliable European logistics, helping workshops maintain continuous production without complex sourcing overhead. Discuss specific bore requirements with Metav Werkzeuge — Technical data and application guidance are available from Metav Werkzeuge; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TKB148TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Product type: Boring bar / holder for indexable inserts Shank diameter: 40 mm Diameter range: 120–170 mm Overall length: 139 mm Weight: 3.281 kg Torx key: T20 Clamping screw: M5x12 For CCMT 1204 indexable inserts Robust construction for reduced vibration Fast insert change with standard Torx fastening Suitable for medium to large internal bores Supplied via Metav Werkzeuge FAQ What insert type does this holder accept? The holder accepts CCMT 1204 indexable inserts; it is specified as a boring bar for CCMT 1204 indexable inserts and is compatible with standard CCMT 1204 geometries. What is the shank diameter and why does it matter? The shank diameter is 40 mm; a larger shank increases rigidity, reduces deflection during cutting and improves surface finish in internal boring operations. Which diameters can be machined with this tool? This holder covers a 120–170 mm bore range, making it suitable for medium to large internal boring tasks where CCMT 1204 inserts are appropriate. What are the fastening details for the insert clamp? Insert clamping uses a T20 Torx key and an M5x12 screw, providing secure, repeatable clamping; replacement screws and keys follow common workshop standards. Who manufactures this holder and what is the SKU? The holder is manufactured by Teknik Makina and sold under SKU TKB148TM; it is distributed via Metav Werkzeuge for European customers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com