120-170mm Boring Tool for CCMT 1204 Indexable Inserts, 139mm Overall Length - Teknik Makina

Take advantage of a precision fit and rapid replacement cycle to maintain steady machining output; the cartridge offers secure seating for CCMT 1204 inserts and straightforward exchange to reduce downtime — order via Metav Werkzeuge or consult their specialists for compatibility advice. Cartridge KR119TM — Cartridge for Boring Tool 120-170 CCMT 1204 (Teknik Makina) The Cartridge KR119TM is a replacement insert cartridge for the boring tool 120-170 CCMT 1204, engineered to ensure stable insert seating and consistent performance in turning and boring applications. Precision fit for CCMT 1204 holders Durable design for repeatable positioning Quick replacement to reduce downtime Secure seating for consistent parts quality The replacement insert is designed to deliver a precision fit that reduces micro-movement at the cutter interface, improving repeatability and part accuracy. A reliably seated CCMT 1204 insert lowers the risk of chatter and dimensional drift during extended cycles, which supports tight tolerance work. For workshops that depend on consistent batch quality, the stable insert interface translates directly into fewer reworks and more predictable inspection results. Faster tool changes to keep production flowing Optimised for quick exchange, the cartridge enables rapid replacement of worn inserts, which shortens machine idle time and improves production uptime. Clear compatibility with the 120–170 boring range and the CCMT 1204 insert format streamlines inventory management for tooling spares. By reducing changeover duration, the insert solution supports leaner process flows and contributes to measurable efficiency gains on the shop floor. Built to withstand workshop conditions Constructed for robust service, the cartridge emphasises secure clamping and mechanical stability under typical turning loads. The combination of precise seating and durable design helps to maintain cutting geometry over prolonged use, reducing the frequency of positional checks. Routine inspection and correct mounting ensure the cartridge continues to deliver reliable performance, supporting both one-off jobs and repetitive production runs. For a precision replacement insert from Teknik Makina, contact Metav Werkzeuge for local supply and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KR119TM Product: Cartridge for Boring Tool 120-170 CCMT 1204 Manufacturer: Teknik Makina Core data Compatibility range: 120–170 Compatible insert: CCMT 1204 SKU: KR119TM Special features Precision fit for insert seating Quick replacement insert Designed for stable clamping in boring tool FAQ Is the cartridge compatible with my 120–170 boring setup? The Cartridge KR119TM from Teknik Makina is specified for use with the boring tool 120-170 CCMT 1204 and accepts CCMT 1204 inserts for correct seating. Which insert format is required for this cartridge? This cartridge is designed specifically for the CCMT 1204 insert format, enabling secure seating and standardised replacement procedures. How does the cartridge influence machining accuracy? By providing a precision-fit seating for the CCMT 1204 insert, the Cartridge KR119TM reduces micro-movement and improves repeatability, which helps to maintain dimensional accuracy over longer runs. Is the cartridge suitable for continuous production use? The cartridge is built for stable clamping under normal turning and boring loads and supports routine changeovers to limit downtime in continuous production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise M5 threading and a compact 12 mm length for secure, space-saving fastening; the Torx drive reduces cam‑out and speeds assembly. Order directly via Metav Werkzeuge or consult our product specialists for application advice. Torx screw TC083TM — M5 x 12 mm, Torx drive (Teknik Makina) Torx screw TC083TM for mechanical assemblies where compact form and reliable torque transfer are required M5 thread for standard metric assemblies Head diameter 7 mm for defined seatings Compact 12 mm overall length for confined spaces Torx drive compatible with T20 bits Consistent M5 thread for secure connections The fastener is engineered with a defined M5 thread that provides consistent engagement and predictable clamping behaviour. Where repeatability matters, the metric thread profile reduces the risk of loosening under light vibration and simplifies torque setting during assembly. The specification supports common production and maintenance environments, enabling standardised tooling and fewer inventory variants. Space-saving dimensions that simplify assembly With an overall length of 12 mm and a head diameter of 7 mm, this component is designed for installations where clearance is limited. The compact geometry allows secure fastening without protruding components, which benefits stacked or nested assemblies. Small form factor screws like this shorten installation time in cluttered assemblies and often remove the need for additional countermeasures such as washers or spacers. Torx drive for efficient torque transfer and less wear A Torx drive provides improved engagement between tool and fastener, allowing higher torque transmission with reduced cam‑out compared with slotted or Phillips drives. The drive compatibility with T20 bits enables rapid screwdriving with cordless or pneumatic drivers while protecting both the bit and the screw head from premature damage. The result is faster cycle times and lower tool‑replacement costs in production and workshop settings. Designed for straightforward procurement and workshop use Supplied under the Teknik Makina designation, the TC083TM is a practical choice for procurement managers seeking an economical, repeatable fastening solution. The concise specification and common drive type simplify stockkeeping and tool selection. For workshops, the screw’s straightforward geometry and compatibility with standard Torx tooling support quick decisions on repair and retrofit operations. For reliable fastening from Teknik Makina, contact Metav Werkzeuge to discuss compatibility, availability or to place an order for the TC083TM fastener — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TC083TM EClass: 21189290 Manufacturer: Teknik Makina Key measurements Diameter: 7 mm Thread: M5 Overall length: 12 mm Angle: 60° Weight: 0.1 kg Features and compatibility Drive type: Torx Compatible driver: T20 Torx key Fastener type: screw FAQ What driver is required for this screw? The screw is designed for a Torx drive and is compatible with a T20 Torx key or bit; this ensures efficient torque transfer for the TC083TM. Is the TC083TM suitable for tight assemblies? Yes, the overall length of 12 mm and a head diameter of 7 mm make the TC083TM appropriate for compact or recessed fastening applications. Which thread does this fastener use? The fastener uses a metric M5 thread, suitable for common metric assemblies and compatible with standard M5 threaded holes and inserts. Can this screw be used with power drivers? The Torx drive and T20 compatibility allow use with cordless and pneumatic drivers; correct torque settings should be observed to avoid over‑tightening. Who manufactures this screw? The screw is supplied under Teknik Makina and listed with article number TC083TM for procurement and stock purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precision T20 drive and ultra-lightweight handling to speed up assembly tasks and reduce operator fatigue; the compact format keeps workshop inventory manageable. Order directly via Metav Werkzeuge or ask the consultants for procurement advice. Torx key T20 — compact T20 drive for workshop and assembly The Torx key T20 is a compact hand tool designed for fast, reliable engagement with T20 fasteners across maintenance, assembly and repair tasks Torx key T20 precision fit Lightweight, only 0.1 kg handling ease Ideal for assembly and repair tasks Teknik Makina original SKU T20TM Faster, more reliable engagement with Torx fasteners The Torx geometry reduces slipping under load and provides a precision fit that translates into fewer cam‑outs and faster screwdriving cycles. With the marked T20 drive size, this key matches the ISO‑defined Torx profile and is suited for repeatable operations where consistency matters. The drive form is explained here so non‑specialists understand the benefit: the star‑shaped recess transfers torque across multiple contact points, lowering the risk of tool and fastener damage and thereby improving process throughput and component longevity. Reduced fatigue through light handling and compact design At just 0.1 kg, the tool supports long routines without adding cumbersome weight to the toolbox. The low mass makes it suitable for technicians and assembly staff who perform many fastening actions per shift, supporting smoother workflows and improved ergonomics. The compact footprint keeps pockets and small toolkits organised and helps speed up task changes on the workbench. The direct consequence is shorter handling times and less strain during repetitive tasks, a practical plus in both workshop and production environments. Straightforward stock management and compatibility Available as SKU T20TM from Teknik Makina, the item is easy to catalogue and reorder for maintenance spares. The clear designation of the Torx size simplifies procurement and reduces the chance of incorrect parts being purchased. For companies consolidating suppliers, the short SKU and concise specification enable predictable replenishment and audit trails. The small, clearly identified tool supports lean inventory practices and swift identification on the workbench. For procurement or volume requirements of the Teknik Makina Torx key T20, contact Metav Werkzeuge in Emmerich for ordering and supply coordination at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: T20TM Manufacturer: Teknik Makina ECLASS: 21189290 Torx size: T20 Weight: 0.1 kg Numerical data Weight (kg): 0.1 ECLASS: 21189290 Features Suitable for Torx T20 fasteners SKU: T20TM Brand: Teknik Makina FAQ What size of fasteners does this tool fit? The tool fits Torx size T20 fasteners; the designation is indicated on the SKU T20TM. Is the T20 key suitable for repetitive assembly work? Yes, the T20 key by Teknik Makina is designed for regular use and its 0.1 kg mass supports reduced operator fatigue in repetitive tasks. How is the Torx drive beneficial compared with slotted or Phillips heads? The Torx drive distributes torque across multiple contact surfaces, reducing cam‑out and wear on both tool and fastener, which improves process reliability. Can the tool be identified easily for reordering? Yes, the clear SKU T20TM and the labelled Torx size simplify stock management and reordering. Who manufactures this Torx key? The tool is from Teknik Makina; the product is supplied under SKU T20TM and distributed via Metav Werkzeuge for European customers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Didn't find the right insert? We can help you!► Send us a photo of your insert directly by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Design details indexable inserts CCMT 120404 from MetavCUT Brand: MetavCUT Manufacturer Order Number: CCMT120404-Stainless Facts & Figures: ISO-Code: CCMT120404 Clearance Angle: 7° Angle: 80° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: rhombic Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-CCMT-120404-Stainless Steel-MetavCUT 40END