200x150x50mm Granite Plate With 1x M8 Thread, DIN 876/0 - Metav IndustryLine

Take advantage of the M10 threaded fixing and Ø50 mm contact area to gain a low‑profile, vibration‑resistant support for measurement plates; the compact 32 mm overall length and lightweight construction ensure easy retrofitting and reliable repeatability on workshop granite bases. Order directly via Metav Werkzeuge or consult their technical team for compatibility questions. M206.118 Granite plate feet (M10, Ø50 mm) — Metav IndustryLine The M206.118 is an accessory for granite plates with an M10 thread and 50 mm diameter pads, engineered to provide stable, low‑profile support for precision measurement bases and fixtures. M10 threaded attachment for secure fixing Ø50 mm support pads for stable contact Compact 32 mm overall length for low profile Increased stability for repeatable measurements Granite support feet with a larger contact pad reduce point pressure and improve the distribution of load across the measurement surface. The Ø50 mm pads offer a broader contact area that helps to limit micro‑movement and vibration, which translates into more repeatable readings on measurement plates and assemblies. Supplied as a set of four, the component supports four‑point seating that stabilises small to medium‑sized bases without adding significant height, making these feet a practical choice where measurement integrity is essential. Straightforward fitting and broad compatibility The M10 screw interface simplifies installation and replacement on compatible plates and fixtures. The M10 thread enables secure mechanical attachment without special tooling, allowing retrofitting to existing measurement setups. Compatibility is documented with models M206.116 and M206.117, and the design is suitable for use wherever a threaded M10 support is specified. The compact form factor also allows easy integration into tight assemblies while maintaining robust mechanical contact. Workshop efficiency through compact design A total length of 32 mm overall length makes these feet particularly suitable for applications that require a low profile to preserve working clearance. At a nominal 0.2 kg the set keeps added mass to a minimum, reducing handling effort and simplifying transport and storage of measurement fixtures. The compact design supports quick assembly workflows and reduces the chance of interference with jigs, gauges or other measuring instruments, helping to keep inspection processes both efficient and dependable. Contact Metav Werkzeuge for tailored advice on integrating these granite plate feet into existing measurement systems or to confirm compatibility with specific plates — Tel: +49 2822 7131930 · Email: info@metav-werkzeuge.com Technical Data Article number: M206.118 GTIN: 4054469183534 Weight: 0.2 kg Set contents: 4 pieces Total length: 32 mm Pad diameter: 50 mm Thread: M10 Facts Suitable for: M206.116 and M206.117 Category: Accessory eCl@ss: 27110390 Special features Low‑profile granite support feet Set for stable, four‑point support Compact design for measurement bases FAQ What thread do these granite plate feet use? The M206.118 granite plate feet from Metav IndustryLine use an M10 thread for mechanical attachment. Are the feet delivered ready for installation as a set? Yes, the M206.118 is supplied as a set of four feet, intended to provide four‑point support for granite plates and similar bases. What are the pad diameter and overall length? The support pads measure Ø50 mm and the components have a 32 mm overall length. Which measurement plates are explicitly compatible? Compatibility is documented for plates referenced as M206.116 and M206.117; the feet fit any application with an M10 mounting requirement. How much does the set weigh? The complete set is specified with a weight of 0.2 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of a strong magnetic base, a chromed support rod and a compact 167 mm height to achieve secure, space‑efficient mounting of indicators and probes; this results in reliable repeatability and fast setup in confined workstations. Order the magnetic indicator stand directly via Metav Werkzeuge or ask our consultants if needed. Magnetic indicator stand M208.105.S — 167 mm height, 152 mm cross arm (Metav IndustryLine) Magnetic indicator stand M208.105.S is a compact magnetic mounting solution for dial indicators and small measuring probes, designed for stable positioning and quick adjustment in machine shops and inspection benches. Strong magnetic base for secure hold Chromed support rod for corrosion resistance Compact 167 mm height for tight setups Ø10×153 cross arm and Ø12×173 column, M8 interface Consistent holding force for repeatable measurements A reliable magnetic base delivers the primary rational advantage: once engaged, the holder remains fixed even under slight lateral loads, which preserves alignment during measurement cycles. The stable mounting reduces slippage and measurement scatter, so readings from dial and electronic indicators remain consistent. This stability shortens cycle times in quality checks and prevents costly rework caused by repositioning errors. Robust, corrosion‑resistant construction for daily workshop use The support elements are made from a chromed rod construction that resists corrosion and provides a smooth sliding action for the cross arm, facilitating fine position adjustments. The Ø10×153 cross arm combined with a Ø12×173 column and an M8 interface ensures compatibility with standard indicator clamps and accessories. The material choice supports long service life in industrial environments and keeps maintenance needs low. Space-saving format that improves workflow and portability With an overall height of 167 mm and a compact footprint, this magnetic stand fits into constrained fixturing spaces where larger mounts cannot. At approximately 0.5 kg it is light enough for frequent repositioning yet substantial enough to remain vibration‑resistant when fixed. The compact format supports rapid changeovers on inspection benches and integrates smoothly into measurement routines, improving throughput without sacrificing accuracy. Contact Metav Werkzeuge today for tailored advice on integrating the magnetic indicator stand into inspection fixtures or for assistance with ordering and delivery from Emmerich. Technical Data SKU: M208.105.S GTIN: 4054469104591 Weight: 0.5 kg Facts Height: 167 mm Cross arm: Ø10×153 mm Column: Ø12×173 mm Thread/interface: M8 ECLASS: 21170601 Tariff code: 90319000 Special features Material: chromed support rod Category: Magnetic stands / Magnetstative Intended use: mounting of dial and electronic indicators FAQ What holding performance can be expected from the magnetic base? The magnetic base offers a strong, repeatable holding force suitable for typical bench and machine‑side indicator work; the magnetic indicator stand M208.105.S maintains secure fixation for consistent readings. Is the cross arm compatible with standard indicator clamps? Yes, the Ø10×153 cross arm together with the Ø12×173 column and M8 interface accepts common indicator clamps and accessory fittings used in industrial metrology. Can the stand be used near running machinery? The magnetic base provides stable fixation for static measurement tasks; for dynamic or high‑vibration environments additional support or specialist fixtures should be considered when using the magnetic indicator stand M208.105.S. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of a central mechanical clamp and a compact gold-coloured column to secure stable, repeatable setups for indicator work; the 345 mm height and light 0.6 kg mass make this column easy to position and integrate with existing magnetic bases. Order the measuring stand column directly via Metav Werkzeuge or consult the Metav team for application advice. Measuring stand column for 208.109.1 (M208.109.G) — gold-coloured with central mechanical force clamp The Measuring stand column for 208.109.1 (M208.109.G) is a precision indicator support intended for use with magnetic bases, combining a central mechanical force clamp and a slim column profile to deliver steady mounting for dial indicators and probes across workshop and inspection tasks. Compact 345 mm column height Central mechanical force clamp Gold-coloured corrosion-resistant finish Lightweight at 0.6 kg Stable support for precise indicator readings The slim column is designed to provide stable mounting for dial indicators and test probes, reducing deflection during contact measurements. With a column height of 345 mm, the unit matches common inspection station layouts while remaining easy to manoeuvre. The central mechanical clamp applies uniform force to the clamped stem, which promotes repeatable measurements and reduces variation introduced at the setup stage. This configuration suits repetitive QA tasks where consistent probe positioning is essential. Fast, repeatable clamping and set-up A central clamp mechanism means secure fixation with a single operation, shortening set-up times and improving throughput in inspection workflows. The mechanical clamp is engineered to transfer clamping force evenly, which avoids tilting and protects fragile indicator stems. The gold-coloured finish provides a recognisable, low-reflective surface that helps inspections under studio or shop lighting, while the unit’s 0.6 kg mass balances portability with enough inertia to resist minor knocks during measurement cycles. Integrates with magnetic-base systems and workshop practice Specified for use with magnetic stands, the column complements existing magnetic bases and stands in machine shops and metrology benches. The compact yet rigid profile supports typical indicator lengths and helps maintain alignment during external, internal and step measurements when used with appropriate probes and holders. Manufactured under the Metav IndustryLine umbrella, the component reflects a workshop-focused approach: robust handling, simple operation and easy integration into standard inspection rigs. Talk to Metav Werkzeuge about the M208.109.G measuring stand column to confirm compatibility with current magnetic bases and secure reliable indicator mounting — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M208.109.G GTIN: 4054469104775 Tariff number: 90319000 Facts Height: 345 mm Weight: 0.6 kg Special features Central mechanical force clamp Gold-coloured finish Compatible with model 208.109.1 Category: Magnetic stands FAQ What is the overall height of the column? The column has an overall height of 345 mm as specified for the M208.109.G measuring stand column. Is the clamp suitable for repeatable indicator positioning? Yes. The central mechanical force clamp on the M208.109.G secures stems evenly to support repeatable measurements. Can the column be mounted on existing magnetic bases? The column is specified for magnetic-stand use and is compatible with the related 208.109.1 magnetic mounting systems. How heavy is the measuring stand column? The column weighs 0.6 kg, providing a balance between portability and sufficient mass for stable setups. What finish does the column have? The column is supplied in a gold-coloured finish, offering a durable, low-reflective surface appropriate for workshop inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a central mechanical clamp, standard M8 compatibility and a compact 280 mm reach to improve repeatability and simplify set-up in production and inspection tasks; order directly via Metav Werkzeuge or consult the specialists for system integration. Measuring rod for magnetic stand M208.109.S — central mechanical clamp, 280 mm (Metav IndustryLine) Measuring rod M208.109.S for magnetic indicator stands, providing a compact extension with a central mechanical force clamp for reliable fixation in workshop and inspection environments. Central mechanical force clamp for secure fixation 280 mm reach for compact setups M8 thread for standard accessory fittings Consistent clamping for repeatable results A centrally mounted mechanical clamp delivers a defined clamping action that reduces variation between set-ups. By focusing the locking force around the rod axis, the central mechanical clamp stabilises the holding position and minimises shifting during measurement cycles, which supports repeatability across serial checks. The result is fewer adjustments, faster changeovers and a measurable improvement in process reliability for inspection tasks. Compact reach with broad compatibility The 280 mm effective length and standard M8 thread make this extension ideal where space is limited but stable positioning is required. With an overall height of 293 mm and a nominal mass of 0.3 kg, the component is easy to position on magnetic bases and integrates with common indicator accessories. The compact geometry keeps the arm rigid while remaining suited to tight setups in machine shops, toolrooms and metrology benches, ensuring consistent probe placement without undue bulk. Workshop-grade design that reduces downtime Designed as a pragmatic component for magnetic indicator stands, the post combines simple mechanical design with serviceable features to keep installations straightforward. The use of a mechanical force clamp eliminates dependency on spring tolerances or complex mechanisms, making maintenance predictable and spare-part needs minimal. Supplied under the Metav IndustryLine range, the item benefits from Metav Werkzeuge’s quality filtering and logistics, helping to keep inspection routines uninterrupted and procurement lean. Contact Metav Werkzeuge to confirm fitment, request the M208.109.S specification sheet and arrange supply for immediate deployment in existing magnetic stand systems Technical data Article number: M208.109.S GTIN: 4054469104782 eClass: 21170601 Facts Length / reach: 280 mm Overall height: 293 mm Thread: M8 Weight: 0.3 kg Tariff number: 90319000 Special features Central mechanical force clamp Intended for magnetic indicator stands Metav IndustryLine product family FAQ What mounting standard does the rod use? The measuring rod uses an M8 thread, making it compatible with standard accessory fittings and magnetic bases designed for M8 connections. Is this post suitable for compact inspection setups? Yes, the 280 mm reach and compact profile are intended for tight workspaces and bench-mounted magnetic stands where rigidity and minimal overhang are priorities. How does the central mechanical clamp improve measurement stability? The central mechanical clamp on this stem concentrates the clamping force centrally, reducing lateral play and delivering a repeatable locking position for successive measurements. What are the dimensional and weight specifications? Overall height is 293 mm and the nominal weight is 0.3 kg, providing a balance of stiffness and manoeuvrability for workshop use. Which product reference should be ordered for this measuring rod? Order reference M208.109.S from the Metav IndustryLine range; the SKU and GTIN help ensure the correct magnetic stand extension is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of consistent clamping force, robust heavy‑duty construction and standard M10 compatibility to maintain repeatable measurement setups in the workshop. Order the magnetic stand rod directly via Metav Werkzeuge or consult the Metav team for application advice. Magnetic stand rod M208.109.4S — heavy‑duty with central clamp, M10, 375 mm The Magnetic stand rod M208.109.4S is a heavy‑duty extension rod for magnetic measuring stands, offering central mechanical force clamping for stable positioning in inspection and shop‑floor metrology. Robust heavy‑duty construction Central mechanical force clamp M10 thread for standard attachments 375 mm effective length Consistent clamping for repeatable measurement setups The central mechanical force clamp ensures repeatable clamping without the variability introduced by multiple tightening points. The single central tightening mechanism locks the rod with uniform force, reducing play and minimising positional deviation during measurements. This characteristic delivers a reliable basis for indicator mounting and short‑cycle inspection tasks, improving throughput and reducing rework due to unstable setups. The design supports systematic, machine‑shop workflows where reproducibility is essential. Standard interface and sensible reach for workshop use With an M10 thread and a length of 375 mm, the rod sits within common standards for magnetic measuring rigs and attachment systems. The combination of thread standardisation and mid‑range length provides a balance between reach and stiffness: sufficient extension for reach into assemblies while retaining the rigidity needed for accurate readings. The modest mass supports quick handling and repositioning without compromising the firm hold required for dial indicators and small probes. Heavy‑duty build that endures daily use The heavy‑duty execution prioritises robustness and long service life under regular workshop conditions. The mechanically actuated central clamp reduces wear from repeated adjustments and keeps moving parts engaged firmly over time. This results in fewer adjustments during inspection cycles and greater confidence in the stability of the measuring setup, translating to improved operational efficiency and lower downtime for maintenance. Faster setup, fewer adjustments, better workflow Single‑point clamping simplifies assembly and reduces setup time compared with multi‑screw arrangements. The rod is optimised for use with magnetic measuring stands and ensures straightforward integration into existing metrology stations. The outcome is a practical tool for production lines and quality‑control benches where rapid, repeatable instrument positioning is required—supporting a smoother measurement process and clearer decision‑making in acceptance testing. For reliable, workshop‑ready magnetic measuring rigs, select the Metav IndustryLine heavy‑duty magnetic stand rod M208.109.4S via Metav Werkzeuge and contact our consultants in Emmerich for tailored application guidance. Technical Data Article number: M208.109.4S GTIN: 4054469167329 Tariff code: 90319000 Category: Magnetic stands Facts Length: 375 mm Thread: M10 Weight: 0.7 kg Special features Central mechanical force clamp Heavy‑duty execution Compatible with magnetic measuring stands FAQ Is the rod compatible with standard magnetic bases? The magnetic stand rod M208.109.4S is designed for use with magnetic measuring stands and standard M10‑threaded attachments, enabling straightforward integration with common magnetic bases. What are the length and mass of the rod? The rod has a length of 375 mm and a weight of 0.7 kg, offering a balance between reach and rigidity for bench and workshop use. How does the central clamp affect repeatability? The central mechanical force clamp on the M208.109.4S provides uniform clamping pressure at a single point, improving positional stability and repeatability during inspections. For which applications is this rod intended? This accessory is aimed at metrology stations and workshop inspection setups where firm, repeatable indicator or probe mounting on a magnetic stand is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the central clamping and compact 270 mm rod length for reliable positioning in measurement setups; the M8 thread allows straightforward integration with standard fixtures and bases. Order the magnetic stand rod directly via Metav Werkzeuge or ask our consultants if needed. Magnetic stand rod M208.109.5S — central clamping, 270 mm, Metav IndustryLine Magnetic stand rod M208.109.5S is a compact support component for measurement stands, providing central clamping and an M8 interface for flexible mounting in inspection and workshop environments Central clamping for secure locking 270 mm rod length with M8 thread Supplied without magnetic base for flexibility Stable support for consistent measurements The central clamping design concentrates the locking force at a single point, reducing twist and ensuring the rod stays in position under load. With an overall height of 278 mm and a compact length of 270 mm, this support is aimed at setups where space is limited but stability is essential. The relatively low mass (0.8 kg) helps to keep the balance of portable rigs while still providing a robust connection to measurement arms or holders. This arrangement benefits process control by reducing repositioning time and improving repeatability of readings on stands and carriers. Simple mechanical interface for fast integration Fitted with a standard M8 thread, the rod is ready to mate with common bases, clamps and accessory plates without adapters. The straightforward mechanical interface reduces procurement complexity and downtime during tool changes. The product is supplied without a magnetic base, which permits selection of a suitable base for the specific application—ferrous magnetic base, fixed clamp or bespoke mounting plate—so that the assembly matches the required holding force and footprint. Traceable identification is provided via the SKU M208.109.5S and GTIN for inventory and asset management. Designed for workshop and inspection versatility The compact support rod is conceived for general measurement tasks in machine shops, quality control benches and toolrooms where modularity matters. As part of the Metav IndustryLine range, the component supports quick reconfiguration of test rigs and checking fixtures, helping to streamline inspection routines. The central locking mechanism and standard thread give clear advantages in set-up speed and long-term reliability, making the rod a practical choice for repetitive measurement sequences and portable gauge assemblies. For compatibility guidance, accessory recommendations or to order the M208.109.5S magnetic stand rod through Metav Werkzeuge in Emmerich, please contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M208.109.5S GTIN: 4054469166988 Tariff number: 90319000 Category: Magnetic stands Facts Length: 270 mm Thread: M8 Overall height: 278 mm Weight: 0.8 kg Special features Central clamping Supplied without magnetic base Compact support for measurement stands FAQ Is the rod supplied with a magnetic base? The M208.109.5S is supplied without a magnetic base and features an M8 thread for mounting to the chosen base or fixture. How does the central clamping benefit measurement stability? Central clamping on the support rod provides uniform locking force and reduces torsion, which improves positional repeatability during inspections. What are the key dimensions and mass for planning fixtures? Length is 270 mm, overall height is 278 mm and the weight is 0.8 kg; these values are intended for layout and balance calculations. Can the rod be used with different bases and accessories? The M8 thread and compact form factor allow straightforward integration with standard magnetic bases, clamps and mounting plates commonly used in workshop measuring equipment. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of central clamping, an M8 mounting interface and a 315 mm stem for fast, repeatable set-ups; the stem is supplied without a magnetic base so the mounting can be tailored to the application. Order the component directly via Metav Werkzeuge or contact our advisers for help choosing a compatible magnetic base. Magnetic stand stem M208.109.6S — central clamping, 315 mm, M8 (Metav IndustryLine) Magnetic stand stem M208.109.6S is a compact, modular replacement or upgrade stem for magnetic measurement stands, designed for inspection benches and workshop use. Central clamping for rapid, secure adjustment 315 mm stem length for extended reach M8 thread for standard magnetic base mounting Faster set-ups with secure central clamping The central clamping mechanism provides a single, stable locking point that reduces play and accelerates assembly of indicator holders and gauges. Because the stem features a standard M8 thread, it is compatible with a broad range of magnetic bases and adapters; this modularity lets workshops choose the magnet or foot that best matches the task. The result is fewer tool changes and shorter measurement cycles, improving throughput while maintaining measurement reliability. Stable support that improves repeatability Built to integrate with magnetic stands and inspection fixtures, the stem’s geometry and mass contribute to reliable support during measurement tasks. With an overall height of 328 mm and a mass of 0.9 kg, the component balances reach and damping so that oscillation is minimised when indicators are mounted. This stability translates directly into better repeatability for comparative checks and set-ups, reducing rework and inspection time. Versatile compatibility and simplified inventory Supplied without a magnetic base, the stem can be paired with purpose-selected magnetic feet or mounting plates, reducing unnecessary stock and allowing bespoke combinations for bench work, machine-side inspections or portable measuring rigs. The straightforward construction supports quick replacement in modular metrology systems and keeps maintenance simple, helping to lower total cost of ownership over the life of the equipment. Contact Metav Werkzeuge for assistance in selecting the right magnetic base or to discuss customised configurations — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M208.109.6S GTIN: 4054469166995 Label: Magnetstativ-Gestänge, Zentralklemmung, L= 315 M8, ohne Magnetfuß Manufacturer: Metav IndustryLine Dimensions & Weight Stem length: 315 mm Overall height: 328 mm Thread size: M8 Weight: 0.9 kg Features & Compatibility Central clamping mechanism Supplied without magnetic base Compatible with standard M8 magnetic bases Category: Magnetic stands FAQ Is a magnetic base included with the stem? No. The stem is supplied without a magnetic base so a compatible magnet or mounting plate can be chosen separately to suit the application. Which thread is used for mounting to a magnetic base? The stem uses an M8 thread for base mounting, ensuring compatibility with common magnetic feet and adapters. What is the effective reach of the stem for indicator mounting? The stem offers a 315 mm length and an overall height of 328 mm, providing extended reach for bench and machine-side inspections. How heavy is the stem and what does this mean for stability? The stem weighs 0.9 kg; this mass helps dampen minor vibrations and contributes to stable indicator readings when mounted on a suitable base. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of secure central clamping, robust M8 compatibility and an extended 360 mm reach for dependable indicator positioning in inspection and workshop routines. Order the magnetic stand rod directly via Metav Werkzeuge or contact our consultants for compatibility advice. M208.109.7S Magnetic stand rod with central clamp — 360 mm, M8 (Metav IndustryLine) The M208.109.7S is a magnetic stand rod with a central clamp, intended to extend the mounting reach for dial indicators and gauge holders in workshop inspection and measurement tasks; supplied without a magnetic base. Central clamping for secure positioning 360 mm length for extended reach M8 thread for standard attachments Supplied without magnetic base Secure mounting for consistent measurements The stem is designed around a single central clamp that provides firm, repeatable fixation with minimal play, reducing set-up time and measurement drift. With a working length of 360 mm and an M8 thread interface, the component offers a balance of reach and rigidity that benefits routine inspection and bench jobs. The construction prioritises steady holding over decorative finishing, so the focus remains on precision and repeatability rather than non‑essential features. Flexible integration into existing inspection rigs Compatibility with standard M8 gauge posts and indicator holders means the rod integrates easily into existing assemblies, enabling rapid configuration changes on the shop floor. Supplied without a magnetic base, the item allows selection of the most suitable base or adapter for the application, whether a low‑profile magnetic foot, a heavy-duty base or a bespoke clamping solution. This flexibility supports efficient workflows and reduces the need for multiple specialised stems. Practical benefits for daily workshop use Lightweight handling and a compact profile simplify positioning and storage while delivering practical stability during measurement tasks. The central clamp reduces the number of adjustment points, so setups are quicker and less error‑prone; this leads to faster inspection cycles and more consistent results across repeated checks. The stem is aimed at machinists and quality technicians who require dependable mounting performance rather than decorative extras. For integration advice or to confirm compatibility with existing indicator holders, contact Metav Werkzeuge about the M208.109.7S and discuss the optimal magnetic base or adapter for the intended application. Technical Data SKU: M208.109.7S GTIN: 4054469167008 Brand: Metav IndustryLine Category: Magnetic stands Supplied without magnetic base Key figures Length: 360 mm Overall height: 368 mm Thread: M8 Weight: 1 kg eClass: 21170601 Special features Central clamp for single‑point tightening Standard M8 attachment thread Compatible with indicator holders and gauge posts Designed for workshop inspection and bench use FAQ What is the working length of this magnetic stand rod? The rod provides a reach of 360 mm; the total overall height is 368 mm for the M208.109.7S from Metav IndustryLine. Is a magnetic base included with the M208.109.7S? No, the M208.109.7S is supplied without a magnetic base to allow selection of the most appropriate base or adapter for the application. Which thread size is used for mounting indicators? The rod uses an M8 thread for attachments, compatible with standard indicator holders and gauge posts commonly used in inspection setups. Can the stem be used with various indicator types? Yes, the M8 interface and the central clamping concept allow connection of a wide range of dial indicators and digital gauge holders for flexible workshop use. How does the central clamp benefit measurement routines? The central clamp offers firm, repeatable fixation with fewer adjustment points, speeding setup and improving repeatability during successive measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of strong 60 kg magnetic holding, lamellae that conform to uneven contact faces and a compact adjustable height for fast, reliable set-ups; order the magnetic base directly via Metav Werkzeuge or consult our advisors if required. Magnetic Base with Lamellae for Uneven Surfaces M208.110 — 60 kg holding force, M8 thread (Metav IndustryLine) The Magnetic Base with Lamellae for Uneven Surfaces M208.110 is a compact magnetic stand designed for attaching measuring instruments to irregular components in workshops and inspection benches. 60 kg holding force with on/off switch Lamellae 54 mm for uneven surfaces Adjustable height up to 15 mm M8 threaded connection for measuring stands Secure holding that speeds up inspection cycles A high 60 kg magnetic force provides firm clamping on ferrous parts, reducing the need for repeated repositioning during measurement tasks. The robust magnetic action shortens set-up time in quality control and fixture tasks, which increases throughput on the shop floor. Built for repeatable performance, the unit’s on/off switch allows safe handling when mounting or removing indicators, lowering the risk of accidental displacement and protecting sensitive probes. Conforms to irregular geometries for dependable contact The integrated lamellae (54 mm) are engineered to redistribute contact pressure across uneven surfaces, enabling stable seating on pitted, curved or oxidised workpieces where flat bases fail. This adaptive contact preserves alignment of measuring tips and supports accurate readings even on imperfect components. The combination of lamellae and adjustable height (up to 15 mm) makes the holder versatile for small positional corrections without changing stands or fixtures. Compact design for flexible workshop integration Weighing 0.7 kg, the magnetic foot is compact yet sturdy, suited to bench-top use and mobile inspection tasks. The M8 threaded interface ensures compatibility with standard measuring stands and dial indicators, simplifying integration into existing metrology setups. The compact format helps maintain accessibility around fixtures while delivering the stability expected in machining and assembly environments, making it a practical choice for workshop and inspection roles. Reliability backed by a precision partner Delivered under the Metav IndustryLine banner, this magnetic base reflects a pragmatic approach to precision: durable mechanics, straightforward operation and compatibility with common metrology gear. Use in routine measurement, fixture support or temporary clamping benefits from a design that prioritises secure contact and operator control. Metav’s distribution presence in Emmerich acts as a quality filter for the European market, ensuring dependable supply and product consistency. Contact Metav Werkzeuge for tailored advice on integrating the M208.110 magnetic base into inspection and fixture workflows Technical data Article number: M208.110 GTIN: 4054469159423 Manufacturer brand: Metav IndustryLine Facts Holding force: 60 kg Thread: M8 Weight: 0.7 kg Tariff number: 90319000 eClass: 21170601 Special features Lamellae 54 mm for uneven contact faces Maximum adjustable height 15 mm On/off magnetic switch for safe operation Suited for magnet stands and measuring probes FAQ What holding force does this magnetic base provide? The M208.110 offers a holding force of 60 kg, sufficient for securing dial indicators and small measuring fixtures during inspection tasks. Is the base suitable for curved or damaged surfaces? Yes, the lamellae design (54 mm) on the magnetic base adapts to uneven or curved surfaces to maintain stable contact and consistent measurements. Which stands and indicators are compatible with the thread? The unit features an M8 threaded connection, compatible with common measuring stands and indicator holders used in workshops. How is the magnetic action controlled during setup? Operation is manual via an integrated on/off switch that allows safe mounting and removal without compromising the position of attached instruments. Can this magnetic base be used for portable inspection tasks? Its compact form and weight of 0.7 kg make the magnetic foot practical for bench-top and mobile inspection duties where reliable temporary clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, secure column accessory that combines precise positioning and easy mounting for consistent measurement routines; the combination of Ø22 × 160 mm column fit, a 40 mm reach and an M8 thread offers reliable compatibility and fast integration — order the measuring rod directly via Metav Werkzeuge or consult our specialists for application advice. Measuring rod M208.146.S – column accessory, Ø22 × 160 mm, 40 mm reach (Metav IndustryLine) The Measuring rod M208.146.S is a compact accessory designed to extend the functionality of a matching measurement column, providing a short offset arm for tight or obstructed measurement points in workshop and inspection environments. Compact column accessory Ø22 × 160 mm 40 mm offset for confined measurement zones M8 thread for secure mounting Lightweight design at 0.3 kg Stable mounting for repeatable measuring setups The extension arm is engineered as a purpose-built column accessory to integrate directly with compatible height gauges and column stands. With a Ø22 × 160 mm column fit and an M8 thread, the component ensures a secure mechanical interface that reduces play and vibration during measurement cycles. This stability translates into consistent repeatability when positioning probes or test indicators, which benefits quality control workflows by lowering the likelihood of measurement error and reducing rework. Precise access where space is limited A short projection of 40 mm is ideal when approaching features that are close to fixtures or adjacent components. The modest reach reduces cantilever effects while still granting access to recesses and edges that would otherwise be hard to reach with bulkier tooling. The configured cross arm provides a purposeful balance between accessibility and profile, so inspection tasks that require confined entry points can be executed with controlled positioning and less obstruction from the measuring rig. Lightweight construction that aids handling and alignment At approximately 0.3 kg, the rod adds minimal mass to the column assembly, keeping the overall centre of gravity close to the support axis and simplifying alignment. The reduced inertia helps during fine adjustment of the probe or indicator and makes repeated set-ups faster to achieve. Built as an accessory for the 208.146 column, the item supports efficient workflows in inspection benches and production metrology stations where quick interchangeability and reliable mechanical interface are priorities. Practical compatibility and workshop benefits Engineered for routine integration, the accessory uses standard connection geometry to match existing column systems, allowing rapid retrofitting without special adaptors. The secure thread mounting and compact geometry make it suitable for both bench-top gauges and portable column arrangements, improving flexibility across inspection tasks. As part of the Metav IndustryLine range, the rod supports a pragmatic approach to equipping workshops with modular, serviceable metrology components. For inquiries about suitability with existing gauges or to request procurement support for the Metav IndustryLine Measuring rod M208.146.S, contact Metav Werkzeuge in Emmerich on +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com — our specialists will advise on integration and delivery options. Technical data Article number: M208.146.S GTIN: 4054469104997 Category: Accessories for measuring devices Facts Weight: 0.3 kg Column diameter × length: Ø22 × 160 mm Reach / offset: 40 mm Cross arm: 60(40) Thread: M8 Customs tariff number: 90173000 UID: M208.146.S Versions / Special features Accessory for column 208.146 Story trigger: zubehör Brand: Metav IndustryLine FAQ Is this rod compatible with the 208.146 column? Yes. The measuring rod M208.146.S is designed as an accessory specifically for the 208.146 column and fits the Ø22 × 160 mm mounting. What is the nominal reach of the extension arm? The rod provides a 40 mm offset, enabling measurements in confined or partially obstructed areas. Which thread is used for mounting? Mounting is via a standard M8 thread to ensure a firm and repeatable connection to the column. How much does the accessory weigh? The component has a weight of approximately 0.3 kg, keeping added mass to a minimum for easier handling and alignment. Can this accessory be used across multiple measuring setups? Yes. The compact design and standard thread allow integration with compatible column systems, making it suitable for interchange within workshop and inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the compact design, secure M8 mounting and precise alignment for repeatable measurements in confined setups. Combine robust post stiffness with a lightweight cross arm for flexible fixturing — order the measuring stem directly via Metav Werkzeuge or ask our consultants if needed. Measuring stem M208.145.S — accessory for 208.145 column with Ø22×180 mm post and Ø18×140 mm arm (Metav IndustryLine) Measuring stem M208.145.S is a compact mounting stem designed to extend the functionality of a measuring column; suitable for precision fixtures and workshop metrology where space and stable positioning are essential. Compact Ø22×180 mm column post for secure mounting Ø18×140 mm cross arm for close-range fixturing M8 thread for direct granite-plate attachment Lightweight 0.2 kg for flexible handling Stable mounting that improves measuring repeatability The accessory provides a stiff Ø22×180 mm post and a short Ø18×140 mm cross arm, yielding a stable connection between the column and the probe fixture. The reduced lever length limits deflection, which in turn reduces measurement scatter; this is particularly valuable for repeat checks and comparative measurements in workshop environments. The design supports a clear mechanical interface that maintains alignment under typical handling. Quick assembly and versatile compatibility Fitted with an M8 thread, the component enables direct attachment to preparations that accept standard M8 fixings such as granite plates or fixtures with matching receptacles. The lightweight 0.2 kg construction assists handheld positioning during setup yet provides sufficient mass to avoid unwanted vibration in normal use. Installation is straightforward and reversible, allowing the same stem to be redeployed across different setups or stored without adding bulk to the metrology bench. Suited for compact metrology workflows and robust inspection routines As an accessory for measuring columns, the stem is intended for applications that require close-range probing, datum setting and small-jig fixturing in machine shops and inspection areas. The combination of a short cross arm and a thicker post offers a balance between reach and rigidity, helping to preserve gauge repeatability under everyday workshop conditions. Sourcing this part from a specialist brand ensures consistent dimensional tolerances and dependable interchangeability with matching column systems. Choose the Metav IndustryLine measuring stem for compact, reliable fixturing — order through Metav Werkzeuge to ensure fast supply and expert advice. Technical Data Article number: M208.145.S GTIN: 4054469104973 Category: Zubehör Facts Post diameter: Ø22 mm Post length: 180 mm Cross arm diameter: Ø18 mm Cross arm length: 140 mm Thread: M8 Weight: 0.2 kg Tariff number: 90173000 Special features Accessory for 208.145 measuring column Designed for secure mounting and minimal deflection Compact form factor for confined setups Manufacturer: Metav IndustryLine FAQ What does this stem fit? The stem is intended for use with the 208.145 measuring column and mates to fixtures that accept an M8 threaded attachment. Is the cross arm suitable for probe mounting? Yes, the Ø18×140 mm cross arm provides a stable short-reach mounting point suitable for probe holders and small fixtures. How much does the accessory weigh? The measuring stem weighs 0.2 kg, which supports easy handling and reconfiguration of the measuring setup. Can the stem be mounted to a granite plate? The component features an M8 thread, allowing direct attachment to granite plates or fixtures with compatible M8 receptacles. Which brand produces this accessory? This accessory is distributed under the Metav IndustryLine brand and designed for consistent compatibility with related column systems. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Robust mounting and compact dimensions combine to deliver stable incremental extension for height gauge 208.144. The rod provides a 100 mm measuring range with an M8 mounting thread and a stiff Ø28×230 mm column, ensuring reproducible set-ups and minimal vibration. Order the accessory directly via Metav Werkzeuge or consult the Metav team for configuration advice. Measuring rod M208.143.S – Accessory for 208.144 with 100 mm range and M8 mount (Metav IndustryLine) The Measuring rod M208.143.S is a compact accessory designed to extend the measurement capability of the 208.144 height gauge by 100 mm, offering a stable column and versatile cross arm for precision inspection tasks in workshops and metrology labs. Extends measurement range to 100 mm M8 thread for granite plate mounting Ø28×230 mm column for stable support Ø18×190 mm cross arm for versatile positioning Greater stability for repeatable measurements The extension rod is engineered to provide a stiff support structure, with a Ø28×230 mm main column that reduces deflection during contact measurements. Paired with the Ø18×190 mm cross arm, the configuration maintains alignment for short-range gauging tasks and small assemblies. This construction increases measurement reproducibility, translating into fewer rechecks and a more efficient inspection routine without additional mechanical adaptation. Secure mounting and straightforward integration Mounting uses an M8 thread widely found on granite plates and metrology fixtures, enabling fast integration into existing setups. The threaded connection combined with the rod’s mass of 2.4 kg gives inertia that helps dampen external disturbances during measurement. The simple mechanical interface avoids complex adapters, which reduces set-up time and supports predictable results in production or quality-control environments. Designed for reliable workshop use As an accessory for the 208.144 system, the rod is suited to everyday tasks in machine shops and inspection benches where compact extension and consistent positioning are required. The accessory is classified as a measuring-instrument component and supports modular arrangements, helping to maintain workflow continuity when switching between small workpieces or repeat measurements on the same fixture. Low-maintenance accessory that supports throughput The straightforward mechanical design minimises maintenance needs while delivering consistent performance under regular use. Fewer moving parts mean less adjustment and a smaller risk of cumulative error, so inspection throughput can be increased without compromising data quality. The accessory complements existing metrology assets by delivering predictable mechanical behaviour in short-range gauging tasks. Contact Metav Werkzeuge for tailored advice on integrating the measuring rod M208.143.S with existing 208.144 setups and to arrange prompt supply from Emmerich. Technical data Article number: M208.143.S GTIN: 4054469104942 Label: Measuring rod 208.143 for 208.144 measuring range 100 mm Facts Measurement range: 100 mm Weight: 2.4 kg Cross arm: Ø18×190 mm Column: Ø28×230 mm Special features Mounting thread: M8 Suitable as accessory for measuring device 208.144 Category: Accessory (Measuring instruments) FAQ What measurement range does this accessory provide? The measuring rod offers a 100 mm extension to the measurement capability of the 208.144 system, enabling short-range gauging tasks. Is the rod compatible with granite plate fixtures? Yes. The rod uses an M8 mounting thread compatible with standard granite plate fixings and metrology fixtures. What dimensions contribute to the rod’s stability? Stability is achieved through the Ø28×230 mm column and the Ø18×190 mm cross arm, which together reduce deflection during contact measurements. Which device is this accessory intended for? This accessory is intended for use with the 208.144 measuring device and is supplied as a dedicated extension component (SKU M208.143.S). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com