60mm Leeb Reference Plate HLD 790 Approximately 2.8 kg - Metav IndustryLine

Take advantage of the combination of rapid on‑site hardness checks, high accuracy (±0.5% at HLD = 800) and robust battery operation for uninterrupted inspection routines; order the Leeb hardness tester directly via Metav Werkzeuge or ask our consultants if needed. Leeb hardness tester HLD + HRC — portable Leeb D rebound tester with OLED display (Metav IndustryLine) The Leeb hardness tester HLD + HRC is a portable rebound tester designed for fast hardness verification on steels and castings across production, maintenance and incoming inspection. Easy operation with clear OLED display High accuracy ±0.5% at HLD = 800 Displays hardness in HL and HRC Rechargeable Li‑ion battery, 10 h runtime Includes support ring, charger and brush Fast, reliable spot checks that keep production moving The handheld rebound tester delivers rapid hardness readings across a broad measurement range (170–960 HLD / 17–68.5 HRC), making it well suited to quick acceptance tests and routine quality control. Using the Leeb D impact method, the unit translates rebound values into standard scales and presents them on a high‑contrast OLED display, readable even in bright ambient light. This combination of speed and clarity reduces inspection time and helps maintain throughput on the shop floor. Precision and repeatability that support process decisions Built for industrial use, the instrument offers high accuracy (±0.5% at HLD = 800) and a repeatability of 0.8%, figures that make results dependable for comparative evaluations and sorting operations. The ability to read hardness both in HL and HRC simplifies communication with downstream processes and engineering documentation. Such reliable numerical performance supports rational decisions on acceptance limits and rework, integrating well into structured quality systems. Designed for workshop conditions and continuous use Power management is optimised for on‑site work: a rechargeable lithium battery provides about 10 hours of continuous operation, with a long standby time of 200 hours, and the device is rated for an extended ambient range (‑20 °C to +60 °C). The compact unit (approx. 2 kg) is supplied with a support ring for small round components, charging cable, power adapter and a cleaning brush for probe care, all packed in a protective storage case for secure transport and storage. These practical details reduce downtime and keep the instrument ready where it is needed. Versatile material coverage for workshop and maintenance tasks The tester is specified for a wide selection of ferrous materials, including steel, stainless steel, steel alloys and grey cast iron, which covers the majority of industrial inspection tasks in machining, fabrication and foundry environments. As a portable, rugged instrument it facilitates checks on assemblies, welds and cast parts without the need to move large components. The result is less handling, faster decision cycles and a more efficient inspection workflow. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine Leeb hardness tester and to arrange supply — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M502.230 GTIN: 4054469181370 Category: Leeb hardness tester Brand: Metav IndustryLine Weight: 2 kg Facts Measurement range: 170–960 HLD / 17–68.5 HRC Measurement method: Leeb D Accuracy: ±0.5% (HLD = 800) Repeatability: 0.8% Continuous runtime: 10 hours Standby time: 200 hours Operating temperature: -20 °C to +60 °C Storage temperature: -30 °C to +60 °C Relative humidity: up to 90 % Special features OLED display, readable in bright light Displays HL and HRC hardness scales Rechargeable lithium battery Includes support ring for small round workpieces Supplied with charging cable, power adapter and cleaning brush Delivered in protective storage case Suitable for steel, stainless steel, steel alloys and grey cast iron FAQ What materials can be tested with this device? The Leeb hardness tester HLD + HRC is specified for steels, stainless steels, steel alloys and grey cast iron and is suitable for typical workshop and maintenance inspections. What does the accuracy specification mean for everyday use? An accuracy of ±0.5% at HLD = 800 means the unit provides consistent measurements suitable for comparative checks and sorting; the 0.8% repeatability ensures reproducible readings during batch inspections. How long does the battery last under continuous operation? Continuous operation is approximately 10 hours on a single charge, with a standby capacity of around 200 hours for intermittent use. Which hardness scales are displayed by the instrument? The instrument shows results in HL and converts them to HRC, allowing direct comparison with Rockwell‑scale specifications where required. What accessories are included with delivery? Delivery includes a support ring for small round workpieces, a charging cable, power adapter and cleaning brush, all supplied in a protective storage case for transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of a wide measurement range, clear OLED display and portable, battery‑powered operation for reliable on‑site hardness control; the instrument stores up to 300 readings and includes practical accessories and a carrying case. Order the tester directly via Metav Werkzeuge or consult the Metav team for application advice. Leeb hardness tester M502.231 — portable Leeb D rebound tester with OLED display The Leeb hardness tester M502.231 is a portable rebound hardness instrument designed for quick, repeatable hardness checks on castings, forgings and finished components across common engineering alloys. Wide measurement range HLD / HRC / HV / HB OLED display, readable in sunlight Stores up to 300 readings Rechargeable lithium battery with 10 h runtime Robust portability for fast, shop‑floor decisions The compact rebound tester offers a combination of portable design and industrial robustness that supports rapid quality checks directly at the production line or in maintenance rounds. With a total weight of 2 kg and a user‑friendly probe, the instrument enables swift positioning on components while maintaining a ±0.5% accuracy rating and a repeatability of 0.8. The OLED display presents results in multiple hardness scales and remains legible under strong ambient light, so operators can record measurements confidently even outdoors or in brightly lit shops. Overall, the form factor reduces handling time and contributes to faster decision cycles in production and inspection processes. Measurement scope and material coverage for diverse applications Using the Leeb D method, the device covers a broad measurement range (170–960 HLD, 17–68.5 HRC, 80–976 HV, 19–651 HB, 30–100 HS, 59–85 HRA, 13–100 HRB), making it suitable for steels, stainless steels, cast irons, aluminium alloys, copper and brass as well as numerous non‑ferrous alloys. This range supports routine acceptance testing, incoming goods inspection and verification of heat treatment outcomes. The rebound principle converts impact energy into hardness values that are displayed in the selected scale, providing immediate, comparable results without complex calculation steps; this simplifies integration into existing quality workflows and reduces the need for multiple specialised instruments. Practical data handling and accessories for traceable records Built‑in memory stores up to 300 readings, enabling batch recording and later transfer for documentation. The unit runs on a rechargeable lithium battery with around 10 hours of continuous operation and a 200‑hour standby time, reducing downtime and the need for frequent battery changes. Supplied accessories include a support ring for small, round workpieces, charging cable, power supply and a cleaning brush, all housed in a transport case for safe storage and mobility. Together, these features facilitate reproducible measurements and straightforward on‑site record keeping, supporting traceability and process control in production environments. For reliable on‑site hardness inspection with the Metav IndustryLine M502.231, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for detailed application advice and order coordination Technical data Article number: M502.231 GTIN: 4054469165523 ECLASS: 21170518 Tariff number: 90241040 Weight: 2 kg Manufacturer: Metav IndustryLine Numbers / Core technical data Measurement range: 170–960 HLD / 17–68.5 HRC / 80–976 HV / 19–651 HB / 30–100 HS / 59–85 HRA / 13–100 HRB Accuracy: ±0.5% Repeatability: 0.8 Battery: rechargeable lithium; standby 200 hours; continuous operation approx. 10 hours Operating temperature: −20 °C to +60 °C Relative humidity: up to 90% Special features / Versions Measurement method: Leeb D rebound method Display: OLED display with multi‑scale readout (HL, HV, HRA, HRC, HRB, HB, HS) Memory: stores up to 300 readings Accessories included: support ring for small round workpieces, charging cable, power supply, cleaning brush Suitable for: steel, stainless steel, cast iron (grey and spheroidal), aluminium alloys, copper, brass and most copper‑tin alloys FAQ What materials can be tested with this rebound tester? The Metav IndustryLine Leeb hardness tester M502.231 measures a wide range of engineering materials, including steels, stainless steels, grey and spheroidal cast iron, aluminium alloys, copper, brass and many other copper‑tin alloys. How is the result shown and which scales are available? Results are displayed on the OLED screen; the instrument provides hardness values in HLD and converts to common scales such as HRC, HV, HB, HRA, HRB and HS for direct interpretation. How many measurements can be stored and how is data handled? The unit stores up to 300 readings internally, allowing batch recording for later documentation; stored values can be exported according to the workshop’s data routines. Is the device suitable for outdoor or bright environments? Yes, the OLED display is designed for good legibility even under strong ambient light, making the tester practical for outdoor inspections and well‑lit production areas. What accessories are supplied for immediate use? The delivery includes a support ring for small round components, charging cable, mains power supply and a cleaning brush, all provided to support immediate, on‑site operation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com